From ff4fa4a4bcbcb8f46cd9231b0a5f3b3d19f5989c Mon Sep 17 00:00:00 2001 From: Automated System Date: Mon, 29 Sep 2014 12:26:02 -0500 Subject: Automated l10n update (.po files) --- tde-i18n-nn/messages/tdebase/ksysguard.po | 1973 +++++++++++++++-------------- 1 file changed, 987 insertions(+), 986 deletions(-) (limited to 'tde-i18n-nn/messages/tdebase/ksysguard.po') diff --git a/tde-i18n-nn/messages/tdebase/ksysguard.po b/tde-i18n-nn/messages/tdebase/ksysguard.po index 69690f230a7..3263a280874 100644 --- a/tde-i18n-nn/messages/tdebase/ksysguard.po +++ b/tde-i18n-nn/messages/tdebase/ksysguard.po @@ -8,16 +8,41 @@ msgid "" msgstr "" "Project-Id-Version: ksysguard\n" -"POT-Creation-Date: 2008-07-08 01:18+0200\n" +"POT-Creation-Date: 2014-09-29 12:05-0500\n" "PO-Revision-Date: 2007-08-15 20:29+0200\n" "Last-Translator: Karl Ove Hufthammer \n" "Language-Team: Norwegian Nynorsk \n" +"Language: nn\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 1.11.4\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" +#: KSysGuardApplet.cc:209 WorkSheet.cc:331 +msgid "Select Display Type" +msgstr "Vel rutetype" + +#: KSysGuardApplet.cc:210 WorkSheet.cc:332 +msgid "&Signal Plotter" +msgstr "&Signalplottar" + +#: KSysGuardApplet.cc:211 WorkSheet.cc:333 +msgid "&Multimeter" +msgstr "&Multimeter" + +#: KSysGuardApplet.cc:212 +msgid "&Dancing Bars" +msgstr "&Dansande stolpar" + +#: KSysGuardApplet.cc:242 KSysGuardApplet.cc:394 +msgid "" +"The KSysGuard applet does not support displaying of this type of sensor. Please " +"choose another sensor." +msgstr "" +"Systemvakt-appleten støttar ikkje vising av denne sensortypen. Vel ein annan " +"sensor." + #: KSysGuardApplet.cc:318 WorkSheet.cc:94 #, c-format msgid "Cannot open the file %1." @@ -27,624 +52,274 @@ msgstr "Kan ikkje opna fila %1." msgid "The file %1 does not contain valid XML." msgstr "Fila %1 inneheld ikkje gyldig XML." -#: WorkSheet.cc:109 +#: KSysGuardApplet.cc:334 msgid "" -"The file %1 does not contain a valid worksheet definition, which must have a " -"document type 'KSysGuardWorkSheet'." +"The file %1 does not contain a valid applet definition, which must have a " +"document type 'KSysGuardApplet'." msgstr "" -"Fila %1 inneheld ingen gyldig arbeidsområdedefinisjon, som må ha dokumenttypen " -"«KSysGuardWorkSheet»." - -#: WorkSheet.cc:125 -msgid "The file %1 has an invalid worksheet size." -msgstr "Fila %1 har ein ugyldig arbeidsområdestorleik." +"Fila %1 inneheld ingen gyldig appletdefinisjon, som må ha dokumenttypen " +"«KSysGuardWorkApplet»." #: KSysGuardApplet.cc:476 WorkSheet.cc:225 #, c-format msgid "Cannot save file %1" msgstr "Kan ikkje lagra fila %1" -#: WorkSheet.cc:273 -msgid "The clipboard does not contain a valid display description." -msgstr "Utklippstavla inneheld ikkje nokon gyldig rutedefinisjon." +#: KSysGuardApplet.cc:488 +msgid "Drag sensors from the TDE System Guard into this cell." +msgstr "Dra sensorar frå TDE Systemvakt til denne cella." -#: SensorDisplayLib/SensorDisplay.cc:104 WorkSheet.cc:315 -msgid "It is impossible to connect to '%1'." -msgstr "Uråd å kopla til «%1»." +#: SensorDisplayLib/MultiMeterSettings.cc:26 +msgid "Multimeter Settings" +msgstr "Innstillingar for multimeter" -#: KSysGuardApplet.cc:209 WorkSheet.cc:331 -msgid "Select Display Type" -msgstr "Vel rutetype" +#: SensorDisplayLib/ProcessController.cc:54 +msgid "Name" +msgstr "Namn" -#: KSysGuardApplet.cc:210 WorkSheet.cc:332 -msgid "&Signal Plotter" -msgstr "&Signalplottar" +#: SensorDisplayLib/ProcessController.cc:55 +msgid "PID" +msgstr "PID" -#: KSysGuardApplet.cc:211 WorkSheet.cc:333 -msgid "&Multimeter" -msgstr "&Multimeter" +#: SensorDisplayLib/ProcessController.cc:56 +msgid "PPID" +msgstr "PPID" -#: WorkSheet.cc:334 -msgid "&BarGraph" -msgstr "&Stolpediagram" +#: SensorDisplayLib/ProcessController.cc:57 +msgid "UID" +msgstr "UID" -#: WorkSheet.cc:335 -msgid "S&ensorLogger" -msgstr "S&ensorlogg" +#: SensorDisplayLib/ProcessController.cc:58 +msgid "GID" +msgstr "GID" -#: ksgrd/SensorAgent.cc:88 -msgid "" -"Message from %1:\n" -"%2" -msgstr "" -"Melding frå %1:\n" -"%2" +#: SensorDisplayLib/DancingBarsSettings.cc:170 +#: SensorDisplayLib/FancyPlotterSettings.cc:234 +#: SensorDisplayLib/ProcessController.cc:59 +msgid "Status" +msgstr "Status" -#: ksgrd/TimerSettings.cc:36 -msgid "Timer Settings" -msgstr "Innstillingar for tidtakar" +#: SensorDisplayLib/ProcessController.cc:60 +#, c-format +msgid "User%" +msgstr "Brukar%" -#: ksgrd/TimerSettings.cc:43 -msgid "Use update interval of worksheet" -msgstr "Bruk oppdateringsintervallet til arbeidsarket" +#: SensorDisplayLib/ProcessController.cc:61 +#, c-format +msgid "System%" +msgstr "System%" -#: KSGAppletSettings.cc:59 WorkSheetSettings.cc:85 ksgrd/TimerSettings.cc:46 -msgid "Update interval:" -msgstr "Oppdateringsintervall:" +#: SensorDisplayLib/ProcessController.cc:62 +#: SensorDisplayLib/ProcessList.cc:776 +msgid "Nice" +msgstr "Snill" -#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 68 -#: KSGAppletSettings.cc:64 WorkSheetSettings.cc:91 ksgrd/TimerSettings.cc:51 -#: rc.cpp:21 -#, no-c-format -msgid " sec" -msgstr " s" +#: SensorDisplayLib/ProcessController.cc:63 +msgid "VmSize" +msgstr "VmSize" -#: WorkSheetSettings.cc:99 ksgrd/TimerSettings.cc:54 -msgid "All displays of the sheet are updated at the rate specified here." -msgstr "Alle visingane av arket vert oppdaterte så ofte som spesifisert her." +#: SensorDisplayLib/ProcessController.cc:64 +msgid "VmRss" +msgstr "VmRss" -#: ksgrd/HostConnector.cc:37 -msgid "Connect Host" -msgstr "Kopla til vert" +#: SensorDisplayLib/ProcessController.cc:65 +msgid "Login" +msgstr "Innlogging" -#: ksgrd/HostConnector.cc:44 -msgid "Host:" -msgstr "Vert:" +#: SensorDisplayLib/ProcessController.cc:66 +msgid "Command" +msgstr "Kommando" -#: ksgrd/HostConnector.cc:54 -msgid "Enter the name of the host you want to connect to." -msgstr "Oppgje namnet på verten du vil kopla til." +#: SensorDisplayLib/ProcessController.cc:97 +msgid "All Processes" +msgstr "Alle prosessar" -#: ksgrd/HostConnector.cc:61 -msgid "Connection Type" -msgstr "Tilkoplingstype" +#: SensorDisplayLib/ProcessController.cc:98 +msgid "System Processes" +msgstr "Systemprosessar" -#: ksgrd/HostConnector.cc:66 -msgid "ssh" -msgstr "ssh" +#: SensorDisplayLib/ProcessController.cc:99 +msgid "User Processes" +msgstr "Brukarprosessar" -#: ksgrd/HostConnector.cc:69 -msgid "Select this to use the secure shell to login to the remote host." -msgstr "Vel dette for å bruka «Secure shell» for å logga inn på verten." +#: SensorDisplayLib/ProcessController.cc:100 +msgid "Own Processes" +msgstr "Eigne prosessar" -#: ksgrd/HostConnector.cc:72 -msgid "rsh" -msgstr "rsh" +#: SensorDisplayLib/ProcessController.cc:103 +msgid "&Tree" +msgstr "&Tre" -#: ksgrd/HostConnector.cc:73 -msgid "Select this to use the remote shell to login to the remote host." -msgstr "Vel dette for å bruka «Remote shell» for å logga inn på verten." +#: SensorDisplayLib/ProcessController.cc:116 +msgid "&Refresh" +msgstr "&Frisk opp" -#: ksgrd/HostConnector.cc:76 -msgid "Daemon" -msgstr "Demon" +#: SensorDisplayLib/ProcessController.cc:123 +msgid "&Kill" +msgstr "&Drep" -#: ksgrd/HostConnector.cc:77 -msgid "" -"Select this if you want to connect to a ksysguard daemon that is running on the " -"machine you want to connect to, and is listening for client requests." -msgstr "" -"Vel dette dersom du vil kopla til ein ksysguard-demon som lyttar etter " -"klientførespurnader på den maskina du vil kopla til." +#: SensorDisplayLib/ProcessController.cc:206 +msgid "%1: Running Processes" +msgstr "%1: Prosessar som køyrer" -#: ksgrd/HostConnector.cc:80 -msgid "Custom command" -msgstr "Annan kommando" +#: SensorDisplayLib/ProcessController.cc:239 +msgid "You need to select a process first." +msgstr "Du må velja ein prosess først." -#: ksgrd/HostConnector.cc:81 +#: SensorDisplayLib/ProcessController.cc:245 +#, c-format msgid "" -"Select this to use the command you entered below to start ksysguardd on the " -"remote host." +"_n: Do you want to kill the selected process?\n" +"Do you want to kill the %n selected processes?" msgstr "" -"Vel dette for å bruka kommandoen du oppgjev under for å starta ksysguardd på " -"verten." +"Vil du drepa den valde prosessen?\n" +"Vil du drepa dei valde %n prosessane?" -#: ksgrd/HostConnector.cc:84 -msgid "Port:" -msgstr "Port:" +#: SensorDisplayLib/ProcessController.cc:248 +msgid "Kill Process" +msgstr "Drep prossess" -#: ksgrd/HostConnector.cc:90 -msgid "" -"Enter the port number on which the ksysguard daemon is listening for " -"connections." -msgstr "Oppgje portnummeret der ksysguard-demonen lyttar etter tilkoplingar." +#: SensorDisplayLib/ProcessController.cc:252 +msgid "Kill" +msgstr "Drep" -#: ksgrd/HostConnector.cc:93 -msgid "e.g. 3112" -msgstr "t.d. 3112" +#: SensorDisplayLib/ProcessController.cc:258 +msgid "Do not ask again" +msgstr "Ikkje spør igjen" -#: ksgrd/HostConnector.cc:96 -msgid "Command:" -msgstr "Kommando:" +#: SensorDisplayLib/ProcessController.cc:344 +#, c-format +msgid "Error while attempting to kill process %1." +msgstr "Feil ved dreping av prosessen %1." -#: ksgrd/HostConnector.cc:105 -msgid "Enter the command that runs ksysguardd on the host you want to monitor." -msgstr "Oppgje kommandoen som startar ksysguardd på verten du vil overvaka." +#: SensorDisplayLib/ProcessController.cc:349 +#, c-format +msgid "Insufficient permissions to kill process %1." +msgstr "Ikkje tilstrekkeleg løyve til å drepa prosessen %1." -#: ksgrd/HostConnector.cc:109 -msgid "e.g. ssh -l root remote.host.org ksysguardd" -msgstr "t.d. ssh -l root vert.nettverk.org ksysguardd" +#: SensorDisplayLib/ProcessController.cc:354 +#: SensorDisplayLib/ProcessController.cc:389 +msgid "Process %1 has already disappeared." +msgstr "Prosessen %1 er alt borte." -#: ksgrd/StyleSettings.cc:41 -msgid "Global Style Settings" -msgstr "Globale stilinnstillingar" +#: SensorDisplayLib/ProcessController.cc:358 +msgid "Invalid Signal." +msgstr "Ugyldig signal." -#: ksgrd/StyleSettings.cc:44 -msgid "Display Style" -msgstr "Visingsstil" - -#: ksgrd/StyleSettings.cc:47 -msgid "First foreground color:" -msgstr "Første framgrunnsfarge:" - -#: ksgrd/StyleSettings.cc:54 -msgid "Second foreground color:" -msgstr "Andre framgrunnsfarge:" - -#. i18n: file ./SensorDisplayLib/SensorLoggerSettingsWidget.ui line 107 -#: ksgrd/StyleSettings.cc:61 rc.cpp:126 -#, no-c-format -msgid "Alarm color:" -msgstr "Alarmfarge:" - -#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 241 -#: SensorDisplayLib/DancingBarsSettings.cc:143 SensorDisplayLib/LogFile.cc:90 -#: ksgrd/StyleSettings.cc:68 rc.cpp:96 rc.cpp:111 rc.cpp:123 rc.cpp:144 -#, no-c-format -msgid "Background color:" -msgstr "Bakgrunnsfarge:" - -#: SensorDisplayLib/DancingBarsSettings.cc:150 -#: SensorDisplayLib/FancyPlotterSettings.cc:176 ksgrd/StyleSettings.cc:75 -msgid "Font size:" -msgstr "Skriftstorleik:" - -#: ksgrd/StyleSettings.cc:85 -msgid "Sensor Colors" -msgstr "Sensorfargar" - -#: ksgrd/StyleSettings.cc:91 -msgid "Change Color..." -msgstr "Endra farge …" - -#: ksgrd/StyleSettings.cc:166 -#, c-format -msgid "Color %1" -msgstr "Farge %1" - -#. i18n: file SystemLoad.sgrd line 5 -#: ksgrd/SensorManager.cc:50 rc.cpp:173 -msgid "CPU Load" -msgstr "Prosessorlast" - -#: ksgrd/SensorManager.cc:51 -msgid "Idle Load" -msgstr "Inaktiv-last" - -#: Workspace.cc:100 Workspace.cc:109 ksgrd/SensorManager.cc:52 -#: ksysguard.cc:171 -msgid "System Load" -msgstr "System-last" - -#: ksgrd/SensorManager.cc:53 -msgid "Nice Load" -msgstr "Snill-last" - -#: ksgrd/SensorManager.cc:54 -msgid "User Load" -msgstr "Brukarlast" - -#: ksgrd/SensorManager.cc:55 -msgid "Memory" -msgstr "Minne" - -#. i18n: file SystemLoad.sgrd line 13 -#: ksgrd/SensorManager.cc:56 rc.cpp:177 -msgid "Physical Memory" -msgstr "Fysisk minne" - -#. i18n: file SystemLoad.sgrd line 21 -#: ksgrd/SensorManager.cc:57 rc.cpp:179 -msgid "Swap Memory" -msgstr "Veksleminne" - -#: ksgrd/SensorManager.cc:58 -msgid "Cached Memory" -msgstr "Mellomlagra minne" - -#: ksgrd/SensorManager.cc:59 -msgid "Buffered Memory" -msgstr "Bufra minne" - -#: ksgrd/SensorManager.cc:60 -msgid "Used Memory" -msgstr "Bruka minne" - -#: ksgrd/SensorManager.cc:61 -msgid "Application Memory" -msgstr "Programminne" - -#: ksgrd/SensorManager.cc:62 -msgid "Free Memory" -msgstr "Ledig minne" - -#: ksgrd/SensorManager.cc:63 -msgid "Process Count" -msgstr "Prosesstal" - -#: ksgrd/SensorManager.cc:64 ksgrd/SensorManager.cc:148 -msgid "Process Controller" -msgstr "Prosesskontroller" - -#: ksgrd/SensorManager.cc:65 -msgid "Disk Throughput" -msgstr "Diskgjennomstrøyming" - -#: ksgrd/SensorManager.cc:66 -msgid "" -"_: CPU Load\n" -"Load" -msgstr "Last" - -#: ksgrd/SensorManager.cc:67 -msgid "Total Accesses" -msgstr "Total tilgang" - -#: ksgrd/SensorManager.cc:68 -msgid "Read Accesses" -msgstr "Lesetilgang" - -#: ksgrd/SensorManager.cc:69 -msgid "Write Accesses" -msgstr "Skrivetilgang" - -#: ksgrd/SensorManager.cc:70 -msgid "Read Data" -msgstr "Lese data" - -#: ksgrd/SensorManager.cc:71 -msgid "Write Data" -msgstr "Skrive data" - -#: ksgrd/SensorManager.cc:72 -msgid "Pages In" -msgstr "Sider inn" - -#: ksgrd/SensorManager.cc:73 -msgid "Pages Out" -msgstr "Sider ut" - -#: ksgrd/SensorManager.cc:74 -msgid "Context Switches" -msgstr "Kontekstbytingar" - -#: ksgrd/SensorManager.cc:75 -msgid "Network" -msgstr "Nettverk" - -#: ksgrd/SensorManager.cc:76 -msgid "Interfaces" -msgstr "Grensesnitt" - -#: ksgrd/SensorManager.cc:77 -msgid "Receiver" -msgstr "Mottakar" - -#: ksgrd/SensorManager.cc:78 -msgid "Transmitter" -msgstr "Sendar" - -#: ksgrd/SensorManager.cc:79 -msgid "Data" -msgstr "Data" - -#: ksgrd/SensorManager.cc:80 -msgid "Compressed Packets" -msgstr "Komprimerte pakkar" - -#: ksgrd/SensorManager.cc:81 -msgid "Dropped Packets" -msgstr "Sleppte pakkar" - -#: ksgrd/SensorManager.cc:82 -msgid "Errors" -msgstr "Feil" - -#: ksgrd/SensorManager.cc:83 -msgid "FIFO Overruns" -msgstr "FIFO-flaum" - -#: ksgrd/SensorManager.cc:84 -msgid "Frame Errors" -msgstr "Rammefeil" - -#: ksgrd/SensorManager.cc:85 -msgid "Multicast" -msgstr "Multikasting" - -#: ksgrd/SensorManager.cc:86 -msgid "Packets" -msgstr "Pakkar" - -#: ksgrd/SensorManager.cc:87 -msgid "Carrier" -msgstr "Bærar" - -#: ksgrd/SensorManager.cc:88 -msgid "Collisions" -msgstr "Kollisjonar" - -#: ksgrd/SensorManager.cc:89 -msgid "Sockets" -msgstr "Soklar" - -#: ksgrd/SensorManager.cc:90 -msgid "Total Number" -msgstr "Totalt" - -#: ksgrd/SensorManager.cc:91 ksgrd/SensorManager.cc:149 -msgid "Table" -msgstr "Tabell" - -#: ksgrd/SensorManager.cc:92 -msgid "Advanced Power Management" -msgstr "Avansert straumstyring" - -#: ksgrd/SensorManager.cc:93 -msgid "ACPI" -msgstr "ACPI" - -#: ksgrd/SensorManager.cc:94 -msgid "Thermal Zone" -msgstr "Temperatursone" - -#: ksgrd/SensorManager.cc:95 -msgid "Temperature" -msgstr "Temperatur" - -#: ksgrd/SensorManager.cc:96 -msgid "Fan" -msgstr "Vifte" - -#: ksgrd/SensorManager.cc:97 -msgid "State" -msgstr "Tilstand" - -#: ksgrd/SensorManager.cc:98 -msgid "Battery" -msgstr "Batteri" - -#: ksgrd/SensorManager.cc:99 -msgid "Battery Charge" -msgstr "Batterilading" - -#: ksgrd/SensorManager.cc:100 -msgid "Battery Usage" -msgstr "Batteribruk" - -#: ksgrd/SensorManager.cc:101 -msgid "Remaining Time" -msgstr "Tid att" - -#: ksgrd/SensorManager.cc:102 -msgid "Interrupts" -msgstr "Avbrot" - -#. i18n: file SystemLoad.sgrd line 10 -#: ksgrd/SensorManager.cc:103 rc.cpp:175 -msgid "Load Average (1 min)" -msgstr "Snittlast (1 min)" - -#: ksgrd/SensorManager.cc:104 -msgid "Load Average (5 min)" -msgstr "Snittlast (5 min)" - -#: ksgrd/SensorManager.cc:105 -msgid "Load Average (15 min)" -msgstr "Snittlast (15 min)" - -#: ksgrd/SensorManager.cc:106 -msgid "Clock Frequency" -msgstr "Klokkefrekvens" - -#: ksgrd/SensorManager.cc:107 -msgid "Hardware Sensors" -msgstr "Maskinvaresensorar" - -#: ksgrd/SensorManager.cc:108 -msgid "Partition Usage" -msgstr "Partisjonsbruk" - -#: ksgrd/SensorManager.cc:109 -msgid "Used Space" -msgstr "Bruka plass" - -#: ksgrd/SensorManager.cc:110 -msgid "Free Space" -msgstr "Ledig plass" - -#: ksgrd/SensorManager.cc:111 -msgid "Fill Level" -msgstr "Fyllnivå" - -#: ksgrd/SensorManager.cc:115 -#, c-format -msgid "CPU%1" -msgstr "Prosessor%1" - -#: ksgrd/SensorManager.cc:117 -#, c-format -msgid "Disk%1" -msgstr "Disk%1" - -#: ksgrd/SensorManager.cc:122 -#, c-format -msgid "Fan%1" -msgstr "Vifte%1" - -#: ksgrd/SensorManager.cc:124 -#, c-format -msgid "Temperature%1" -msgstr "Temperatur%1" - -#: ksgrd/SensorManager.cc:127 -msgid "Total" -msgstr "Totalt" - -#: ksgrd/SensorManager.cc:133 -#, c-format -msgid "Int%1" -msgstr "Avbrot%1" - -#: ksgrd/SensorManager.cc:140 -msgid "" -"_: the unit 1 per second\n" -"1/s" -msgstr "1/s" - -#: ksgrd/SensorManager.cc:141 -msgid "kBytes" -msgstr "KB" - -#: ksgrd/SensorManager.cc:142 -msgid "" -"_: the unit minutes\n" -"min" -msgstr "min" - -#: ksgrd/SensorManager.cc:143 -msgid "" -"_: the frequency unit\n" -"MHz" -msgstr "MHz" +#: SensorDisplayLib/ProcessController.cc:379 +#, c-format +msgid "Error while attempting to renice process %1." +msgstr "Feil ved endring av snillverdi på prosessen %1." -#: ksgrd/SensorManager.cc:146 -msgid "Integer Value" -msgstr "Heiltalsverdi" +#: SensorDisplayLib/ProcessController.cc:384 +#, c-format +msgid "Insufficient permissions to renice process %1." +msgstr "Ikkje tilstrekkeleg løyve til å endra snillverdi på prosessen %1." -#: ksgrd/SensorManager.cc:147 -msgid "Floating Point Value" -msgstr "Flyttalsverdi" +#: SensorDisplayLib/ProcessController.cc:393 +msgid "Invalid argument." +msgstr "Ugyldig argument." -#: ksgrd/SensorManager.cc:289 -msgid "Connection to %1 has been lost." -msgstr "Tilkoplinga til %1 er broten." +#: SensorDisplayLib/SensorDisplay.cc:104 WorkSheet.cc:315 +msgid "It is impossible to connect to '%1'." +msgstr "Uråd å kopla til «%1»." -#: ksgrd/SensorSocketAgent.cc:104 -msgid "Connection to %1 refused" -msgstr "Nekta tilgang til %1" +#: SensorDisplayLib/SensorDisplay.cc:162 +msgid "Launch &System Guard" +msgstr "Start &systemvakt" -#: ksgrd/SensorSocketAgent.cc:108 -msgid "Host %1 not found" -msgstr "Fann ikkje verten %1" +#: SensorDisplayLib/SensorDisplay.cc:166 SensorDisplayLib/SensorLogger.cc:380 +msgid "&Properties" +msgstr "&Eigenskapar" -#: ksgrd/SensorSocketAgent.cc:112 -#, c-format -msgid "Timeout at host %1" -msgstr "Tidsavbrot ved verten %1" +#: SensorDisplayLib/SensorDisplay.cc:167 SensorDisplayLib/SensorLogger.cc:381 +msgid "&Remove Display" +msgstr "&Fjern rute" -#: ksgrd/SensorSocketAgent.cc:116 -#, c-format -msgid "Network failure host %1" -msgstr "Nettverksfeil ved verten %1" +#: SensorDisplayLib/SensorDisplay.cc:169 +msgid "&Setup Update Interval..." +msgstr "Vel oppdaterings&intervall …" -#: _translatorinfo.cpp:1 -msgid "" -"_: NAME OF TRANSLATORS\n" -"Your names" -msgstr "Gaute Hvoslef Kvalnes" +#: SensorDisplayLib/SensorDisplay.cc:171 +msgid "&Continue Update" +msgstr "&Hald fram med oppdatering" -#: _translatorinfo.cpp:3 -msgid "" -"_: EMAIL OF TRANSLATORS\n" -"Your emails" -msgstr "gaute@verdsveven.com" +#: SensorDisplayLib/SensorDisplay.cc:173 +msgid "P&ause Update" +msgstr "&Pause i oppdatering" -#: Workspace.cc:53 +#: SensorDisplayLib/SensorDisplay.cc:240 msgid "" -"This is your work space. It holds your worksheets. You need to create a new " -"worksheet (Menu File->New) before you can drag sensors here." +"" +"

This is a sensor display. To customize a sensor display click and hold the " +"right mouse button on either the frame or the display box and select the " +"Properties entry from the popup menu. Select Remove " +"to delete the display from the worksheet.

%1" msgstr "" -"Dette er arbeidsområdet, der du arbeidsarka. Du må laga eit nytt arbeidsark " -"(menyval Fil->Ny) før du kan dra sensorar hit." - -#: Workspace.cc:105 ksysguard.cc:176 -msgid "Process Table" -msgstr "Prosesstabell" +"" +"

Dette er ei sensorvising. For å tilpassa ei sensorvising, kan du klikka og " +"halda nede høgre museknapp på ramma eller boksen og velja Eigenskapar " +"frå sprettoppmenyen. Vel Fjern for å sletta visinga frå arbeidsarket.

" +"%1" -#: Workspace.cc:135 -#, c-format -msgid "Sheet %1" -msgstr "Område %1" +#: SensorDisplayLib/DummyDisplay.cc:33 +msgid "Drop Sensor Here" +msgstr "Slepp sensor her" -#: Workspace.cc:165 Workspace.cc:305 +#: SensorDisplayLib/DummyDisplay.cc:38 msgid "" -"The worksheet '%1' contains unsaved data.\n" -"Do you want to save the worksheet?" +"This is an empty space in a worksheet. Drag a sensor from the Sensor Browser " +"and drop it here. A sensor display will appear that allows you to monitor the " +"values of the sensor over time." msgstr "" -"Arbeidsområdet «%1» inneheld ulagra data.\n" -"Vil du lagra arbeidsområdet?" +"Dette er eit tomt felt i eit arbeidsområde. Dra ein sensor frå sensorlesaren og " +"slepp han her. Ei sensorrute viser då verdiane til sensoren over tid." -#: Workspace.cc:181 Workspace.cc:235 -msgid "*.sgrd|Sensor Files" -msgstr "*.sgrd|Sensorfiler" +#: SensorDisplayLib/SensorLoggerSettings.cc:26 +msgid "Sensor Logger Settings" +msgstr "Innstillingar for sensorlogg" -#: Workspace.cc:184 -msgid "Select Worksheet to Load" -msgstr "Vel eit arbeidsark som skal lastast" +#: SensorDisplayLib/SensorLogger.cc:136 +msgid "Logging" +msgstr "Loggar" -#: Workspace.cc:229 Workspace.cc:269 -msgid "You do not have a worksheet that could be saved." -msgstr "Det finst ingen arbeidsområde som kan lagrast." +#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 48 +#: SensorDisplayLib/SensorLogger.cc:137 rc.cpp:129 +#, no-c-format +msgid "Timer Interval" +msgstr "Tidsintervall" -#: Workspace.cc:239 -msgid "Save Current Worksheet As" -msgstr "Lagra arbeidsarket som" +#: SensorDisplayLib/SensorLogger.cc:138 +msgid "Sensor Name" +msgstr "Sensornamn" -#: Workspace.cc:320 -msgid "There are no worksheets that could be deleted." -msgstr "Det finst ingen arbeidsområde som kan slettast." +#: SensorDisplayLib/SensorLogger.cc:139 +msgid "Host Name" +msgstr "Vertsnamn" -#: Workspace.cc:448 -msgid "Cannot find file ProcessTable.sgrd." -msgstr "Finn ikkje fila ProcessTable.sgrd." +#: SensorDisplayLib/SensorLogger.cc:140 +msgid "Log File" +msgstr "Loggfil" -#: KSGAppletSettings.cc:34 -msgid "System Guard Settings" -msgstr "Systemvaktoppsett" +#: SensorDisplayLib/SensorLogger.cc:151 SensorDisplayLib/SensorLoggerDlg.cc:28 +msgid "Sensor Logger" +msgstr "Sensorlogg" -#: KSGAppletSettings.cc:42 -msgid "Number of displays:" -msgstr "Tal på ruter:" +#: SensorDisplayLib/SensorLogger.cc:383 +msgid "&Remove Sensor" +msgstr "&Fjern sensor" -#: KSGAppletSettings.cc:50 -msgid "Size ratio:" -msgstr "Storleikshøve:" +#: SensorDisplayLib/SensorLogger.cc:384 +msgid "&Edit Sensor..." +msgstr "&Rediger sensor …" -#: KSGAppletSettings.cc:54 -#, c-format -msgid "%" -msgstr " %" +#: SensorDisplayLib/SensorLogger.cc:396 +msgid "St&op Logging" +msgstr "St&opp logging" + +#: SensorDisplayLib/SensorLogger.cc:398 +msgid "S&tart Logging" +msgstr "S&tart logging" #: SensorDisplayLib/ProcessList.cc:110 msgid "" @@ -688,132 +363,127 @@ msgid "" "idle" msgstr "passiv" -#: SensorDisplayLib/ProcessList.cc:250 +#: SensorDisplayLib/ProcessList.cc:252 msgid "Remove Column" msgstr "Fjern kolonne" -#: SensorDisplayLib/ProcessList.cc:251 +#: SensorDisplayLib/ProcessList.cc:253 msgid "Add Column" msgstr "Legg til kolonne" -#: SensorDisplayLib/ProcessList.cc:252 +#: SensorDisplayLib/ProcessList.cc:254 msgid "Help on Column" msgstr "Hjelp om kolonne" -#: SensorDisplayLib/ProcessController.cc:62 -#: SensorDisplayLib/ProcessList.cc:771 -msgid "Nice" -msgstr "Snill" - -#: SensorDisplayLib/ProcessList.cc:776 +#: SensorDisplayLib/ProcessList.cc:781 msgid "Hide Column" msgstr "Gøym kolonne" -#: SensorDisplayLib/ProcessList.cc:782 +#: SensorDisplayLib/ProcessList.cc:787 msgid "Show Column" msgstr "Vis kolonne" -#: SensorDisplayLib/ProcessList.cc:786 +#: SensorDisplayLib/ProcessList.cc:791 msgid "Select All Processes" msgstr "Merk alle prosessane" -#: SensorDisplayLib/ProcessList.cc:787 +#: SensorDisplayLib/ProcessList.cc:792 msgid "Unselect All Processes" msgstr "Merk ingen prosessar" -#: SensorDisplayLib/ProcessList.cc:793 +#: SensorDisplayLib/ProcessList.cc:798 msgid "Select All Child Processes" msgstr "Merk alle barneprosessane" -#: SensorDisplayLib/ProcessList.cc:794 +#: SensorDisplayLib/ProcessList.cc:799 msgid "Unselect All Child Processes" msgstr "Merk ingen barneprosessar" -#: SensorDisplayLib/ProcessList.cc:796 +#: SensorDisplayLib/ProcessList.cc:801 msgid "SIGABRT" msgstr "SIGABRT" -#: SensorDisplayLib/ProcessList.cc:797 +#: SensorDisplayLib/ProcessList.cc:802 msgid "SIGALRM" msgstr "SIGALRM" -#: SensorDisplayLib/ProcessList.cc:798 +#: SensorDisplayLib/ProcessList.cc:803 msgid "SIGCHLD" msgstr "SIGCHLD" -#: SensorDisplayLib/ProcessList.cc:799 +#: SensorDisplayLib/ProcessList.cc:804 msgid "SIGCONT" msgstr "SIGCONT" -#: SensorDisplayLib/ProcessList.cc:800 +#: SensorDisplayLib/ProcessList.cc:805 msgid "SIGFPE" msgstr "SIGFPE" -#: SensorDisplayLib/ProcessList.cc:801 +#: SensorDisplayLib/ProcessList.cc:806 msgid "SIGHUP" msgstr "SIGHUP" -#: SensorDisplayLib/ProcessList.cc:802 +#: SensorDisplayLib/ProcessList.cc:807 msgid "SIGILL" msgstr "SIGILL" -#: SensorDisplayLib/ProcessList.cc:803 +#: SensorDisplayLib/ProcessList.cc:808 msgid "SIGINT" msgstr "SIGINT" -#: SensorDisplayLib/ProcessList.cc:804 +#: SensorDisplayLib/ProcessList.cc:809 msgid "SIGKILL" msgstr "SIGKILL" -#: SensorDisplayLib/ProcessList.cc:805 +#: SensorDisplayLib/ProcessList.cc:810 msgid "SIGPIPE" msgstr "SIGPIPE" -#: SensorDisplayLib/ProcessList.cc:806 +#: SensorDisplayLib/ProcessList.cc:811 msgid "SIGQUIT" msgstr "SIGQUIT" -#: SensorDisplayLib/ProcessList.cc:807 +#: SensorDisplayLib/ProcessList.cc:812 msgid "SIGSEGV" msgstr "SIGSEGV" -#: SensorDisplayLib/ProcessList.cc:808 +#: SensorDisplayLib/ProcessList.cc:813 msgid "SIGSTOP" msgstr "SIGSTOP" -#: SensorDisplayLib/ProcessList.cc:809 +#: SensorDisplayLib/ProcessList.cc:814 msgid "SIGTERM" msgstr "SIGTERM" -#: SensorDisplayLib/ProcessList.cc:810 +#: SensorDisplayLib/ProcessList.cc:815 msgid "SIGTSTP" msgstr "SIGTSTP" -#: SensorDisplayLib/ProcessList.cc:811 +#: SensorDisplayLib/ProcessList.cc:816 msgid "SIGTTIN" msgstr "SIGTTIN" -#: SensorDisplayLib/ProcessList.cc:812 +#: SensorDisplayLib/ProcessList.cc:817 msgid "SIGTTOU" msgstr "SIGTTOU" -#: SensorDisplayLib/ProcessList.cc:813 +#: SensorDisplayLib/ProcessList.cc:818 msgid "SIGUSR1" msgstr "SIGUSR1" -#: SensorDisplayLib/ProcessList.cc:814 +#: SensorDisplayLib/ProcessList.cc:819 msgid "SIGUSR2" msgstr "SIGUSR2" -#: SensorDisplayLib/ProcessList.cc:817 +#: SensorDisplayLib/ProcessList.cc:822 msgid "Send Signal" msgstr "Send signal" -#: SensorDisplayLib/ProcessList.cc:825 +#: SensorDisplayLib/ProcessList.cc:830 msgid "Renice Process..." msgstr "Endra snillverdi på prosess …" -#: SensorDisplayLib/ProcessList.cc:873 +#: SensorDisplayLib/ProcessList.cc:878 msgid "" "_n: Do you really want to send signal %1 to the selected process?\n" "Do you really want to send signal %1 to the %n selected processes?" @@ -821,10 +491,43 @@ msgstr "" "Vil du verkeleg senda signal %1 til den valde prosessen?\n" "Vil du verkeleg senda signal %1 til dei %n valde prosessane?" -#: SensorDisplayLib/ProcessList.cc:877 +#: SensorDisplayLib/ProcessList.cc:882 msgid "Send" msgstr "Send" +#: SensorDisplayLib/ReniceDlg.cc:32 +msgid "Renice Process" +msgstr "Endra snillverdi på prosess" + +#: SensorDisplayLib/ReniceDlg.cc:40 +msgid "" +"You are about to change the scheduling priority of\n" +"process %1. Be aware that only the Superuser (root)\n" +"can decrease the nice level of a process. The lower\n" +"the number is the higher the priority.\n" +"\n" +"Please enter the desired nice level:" +msgstr "" +"Du er i ferd med å endra køyreplanprioriteten til\n" +"prosess %1. Ver klar over at berre superbrukaren (rot)\n" +"kan senka snillverdien på ein prosess. Lågare tal\n" +"gjev høgare prioritet.\n" +"\n" +"Oppgje ønska snillverdi:" + +#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 94 +#: SensorDisplayLib/LogFile.cc:88 rc.cpp:27 +#, no-c-format +msgid "Foreground color:" +msgstr "Framgrunnsfarge:" + +#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 102 +#: SensorDisplayLib/DancingBarsSettings.cc:143 SensorDisplayLib/LogFile.cc:90 +#: ksgrd/StyleSettings.cc:68 rc.cpp:30 rc.cpp:69 rc.cpp:123 rc.cpp:171 +#, no-c-format +msgid "Background color:" +msgstr "Bakgrunnsfarge:" + #: SensorDisplayLib/DancingBarsSettings.cc:43 msgid "Edit BarGraph Preferences" msgstr "Rediger innstillingar for stolpediagram" @@ -833,16 +536,16 @@ msgstr "Rediger innstillingar for stolpediagram" msgid "Range" msgstr "Område" -#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 25 +#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 46 #: SensorDisplayLib/DancingBarsSettings.cc:50 WorkSheetSettings.cc:48 -#: rc.cpp:48 rc.cpp:99 rc.cpp:114 rc.cpp:135 +#: rc.cpp:21 rc.cpp:60 rc.cpp:75 rc.cpp:159 #, no-c-format msgid "Title" msgstr "Tittel" #. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 36 #: SensorDisplayLib/DancingBarsSettings.cc:54 -#: SensorDisplayLib/FancyPlotterSettings.cc:64 rc.cpp:51 +#: SensorDisplayLib/FancyPlotterSettings.cc:64 rc.cpp:78 #, no-c-format msgid "Enter the title of the display here." msgstr "Skriv tittelen på ruta her." @@ -880,13 +583,13 @@ msgstr "" "automatisk områdesjekk bruka." #. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 61 -#: SensorDisplayLib/DancingBarsSettings.cc:84 rc.cpp:60 +#: SensorDisplayLib/DancingBarsSettings.cc:84 rc.cpp:87 #, no-c-format msgid "Alarms" msgstr "Alarmar" -#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 78 -#: SensorDisplayLib/DancingBarsSettings.cc:87 rc.cpp:24 rc.cpp:75 +#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 138 +#: SensorDisplayLib/DancingBarsSettings.cc:87 rc.cpp:102 rc.cpp:135 #, no-c-format msgid "Alarm for Minimum Value" msgstr "Alarm ved minsteverdi" @@ -896,32 +599,32 @@ msgstr "Alarm ved minsteverdi" msgid "Enable alarm" msgstr "Slå på alarm" -#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 92 -#: SensorDisplayLib/DancingBarsSettings.cc:92 rc.cpp:30 rc.cpp:81 +#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 152 +#: SensorDisplayLib/DancingBarsSettings.cc:92 rc.cpp:108 rc.cpp:141 #, no-c-format msgid "Enable the minimum value alarm." msgstr "Slå på alarm for minsteverdi." -#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 120 -#: SensorDisplayLib/DancingBarsSettings.cc:95 rc.cpp:33 rc.cpp:84 +#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 180 +#: SensorDisplayLib/DancingBarsSettings.cc:95 rc.cpp:111 rc.cpp:144 #, no-c-format msgid "Lower limit:" msgstr "Nedre grense:" -#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 144 -#: SensorDisplayLib/DancingBarsSettings.cc:105 rc.cpp:36 rc.cpp:63 +#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 72 +#: SensorDisplayLib/DancingBarsSettings.cc:105 rc.cpp:90 rc.cpp:147 #, no-c-format msgid "Alarm for Maximum Value" msgstr "Alarm ved høgsteverdi" -#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 158 -#: SensorDisplayLib/DancingBarsSettings.cc:110 rc.cpp:42 rc.cpp:69 +#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 86 +#: SensorDisplayLib/DancingBarsSettings.cc:110 rc.cpp:96 rc.cpp:153 #, no-c-format msgid "Enable the maximum value alarm." msgstr "Slå på alarm for høgsteverdi." -#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 186 -#: SensorDisplayLib/DancingBarsSettings.cc:113 rc.cpp:45 rc.cpp:72 +#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 114 +#: SensorDisplayLib/DancingBarsSettings.cc:113 rc.cpp:99 rc.cpp:156 #, no-c-format msgid "Upper limit:" msgstr "Øvre grense:" @@ -938,6 +641,11 @@ msgstr "Farge på vanlege stolpar:" msgid "Out-of-range color:" msgstr "Farge over grenseverdi:" +#: SensorDisplayLib/DancingBarsSettings.cc:150 +#: SensorDisplayLib/FancyPlotterSettings.cc:176 ksgrd/StyleSettings.cc:75 +msgid "Font size:" +msgstr "Skriftstorleik:" + #: SensorDisplayLib/DancingBarsSettings.cc:154 msgid "" "This determines the size of the font used to print a label underneath the bars. " @@ -971,12 +679,6 @@ msgstr "Namn" msgid "Unit" msgstr "Eining" -#: SensorDisplayLib/DancingBarsSettings.cc:170 -#: SensorDisplayLib/FancyPlotterSettings.cc:234 -#: SensorDisplayLib/ProcessController.cc:59 -msgid "Status" -msgstr "Status" - #: SensorDisplayLib/DancingBarsSettings.cc:174 msgid "Edit..." msgstr "Rediger …" @@ -1090,481 +792,707 @@ msgid "Check this to enable horizontal lines if display is large enough." msgstr "" "Merk av her for å visa horisontale linjer dersom diagramruta er stor nok." -#: SensorDisplayLib/FancyPlotterSettings.cc:154 -msgid "Count:" -msgstr "Tal:" +#: SensorDisplayLib/FancyPlotterSettings.cc:154 +msgid "Count:" +msgstr "Tal:" + +#: SensorDisplayLib/FancyPlotterSettings.cc:160 +msgid "Enter the number of horizontal lines here." +msgstr "Oppgje talet på horisontale linjer her." + +#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 35 +#: SensorDisplayLib/FancyPlotterSettings.cc:168 rc.cpp:18 +#, no-c-format +msgid "Text" +msgstr "Tekst" + +#: SensorDisplayLib/FancyPlotterSettings.cc:172 +msgid "Labels" +msgstr "Etikettar" + +#: SensorDisplayLib/FancyPlotterSettings.cc:173 +msgid "" +"Check this box if horizontal lines should be decorated with the values they " +"mark." +msgstr "" +"Merk av her dersom horisontale linjer skal merkast med dei verdiane dei " +"representerer." + +#: SensorDisplayLib/FancyPlotterSettings.cc:185 +msgid "Top bar" +msgstr "Topplinje" + +#: SensorDisplayLib/FancyPlotterSettings.cc:186 +msgid "" +"Check this to active the display title bar. This is probably only useful for " +"applet displays. The bar is only visible if the display is large enough." +msgstr "" +"Merk av her for å visa ei tittellinje. Funksjonen er sannsynlegvis berre nyttig " +"for applet-visingar. Tittelen er berre synleg dersom diagramruta er stor nok." + +#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 64 +#: SensorDisplayLib/FancyPlotterSettings.cc:193 rc.cpp:24 rc.cpp:63 rc.cpp:114 +#: rc.cpp:162 +#, no-c-format +msgid "Colors" +msgstr "Fargar" + +#: SensorDisplayLib/FancyPlotterSettings.cc:196 +msgid "Vertical lines:" +msgstr "Loddrette linjer:" + +#: SensorDisplayLib/FancyPlotterSettings.cc:203 +msgid "Horizontal lines:" +msgstr "Vassrette linjer:" + +#: SensorDisplayLib/FancyPlotterSettings.cc:210 +msgid "Background:" +msgstr "Bakgrunn:" + +#: SensorDisplayLib/FancyPlotterSettings.cc:242 +msgid "Set Color..." +msgstr "Vel farge …" + +#: SensorDisplayLib/FancyPlotterSettings.cc:244 +msgid "Push this button to configure the color of the sensor in the diagram." +msgstr "Bruk denne knappen for å setja opp fargen på sensoren i diagrammet." + +#: SensorDisplayLib/FancyPlotterSettings.cc:252 +msgid "Move Up" +msgstr "Flytt opp" + +#: SensorDisplayLib/FancyPlotterSettings.cc:256 +msgid "Move Down" +msgstr "Flytt ned" + +#: SensorDisplayLib/ListViewSettings.cc:26 +msgid "List View Settings" +msgstr "Innstillingar for listevising" + +#: KSGAppletSettings.cc:34 +msgid "System Guard Settings" +msgstr "Systemvaktoppsett" + +#: KSGAppletSettings.cc:42 +msgid "Number of displays:" +msgstr "Tal på ruter:" + +#: KSGAppletSettings.cc:50 +msgid "Size ratio:" +msgstr "Storleikshøve:" + +#: KSGAppletSettings.cc:54 +#, c-format +msgid "%" +msgstr " %" + +#: KSGAppletSettings.cc:59 WorkSheetSettings.cc:85 ksgrd/TimerSettings.cc:46 +msgid "Update interval:" +msgstr "Oppdateringsintervall:" + +#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 68 +#: KSGAppletSettings.cc:64 WorkSheetSettings.cc:91 ksgrd/TimerSettings.cc:51 +#: rc.cpp:132 +#, no-c-format +msgid " sec" +msgstr " s" + +#: WorkSheet.cc:109 +msgid "" +"The file %1 does not contain a valid worksheet definition, which must have a " +"document type 'KSysGuardWorkSheet'." +msgstr "" +"Fila %1 inneheld ingen gyldig arbeidsområdedefinisjon, som må ha dokumenttypen " +"«KSysGuardWorkSheet»." + +#: WorkSheet.cc:125 +msgid "The file %1 has an invalid worksheet size." +msgstr "Fila %1 har ein ugyldig arbeidsområdestorleik." + +#: WorkSheet.cc:273 +msgid "The clipboard does not contain a valid display description." +msgstr "Utklippstavla inneheld ikkje nokon gyldig rutedefinisjon." + +#: WorkSheet.cc:334 +msgid "&BarGraph" +msgstr "&Stolpediagram" + +#: WorkSheet.cc:335 +msgid "S&ensorLogger" +msgstr "S&ensorlogg" + +#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 17 +#: rc.cpp:15 +#, no-c-format +msgid "Log File Settings" +msgstr "Innstillingar for loggfil" + +#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 187 +#: rc.cpp:36 +#, no-c-format +msgid "Select Font..." +msgstr "Vel skrift …" + +#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 199 +#: rc.cpp:39 +#, no-c-format +msgid "Filter" +msgstr "Filter" + +#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 238 +#: rc.cpp:42 +#, no-c-format +msgid "&Add" +msgstr "&Legg til" + +#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 254 +#: rc.cpp:48 +#, no-c-format +msgid "&Change" +msgstr "&Endra" + +#. i18n: file ./SensorDisplayLib/SensorLoggerSettingsWidget.ui line 91 +#: rc.cpp:66 rc.cpp:165 +#, no-c-format +msgid "Text color:" +msgstr "Tekstfarge:" + +#. i18n: file ./SensorDisplayLib/SensorLoggerSettingsWidget.ui line 107 +#: ksgrd/StyleSettings.cc:61 rc.cpp:72 +#, no-c-format +msgid "Alarm color:" +msgstr "Alarmfarge:" + +#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 44 +#: rc.cpp:81 +#, no-c-format +msgid "&Show unit" +msgstr "&Vis eining" + +#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 47 +#: rc.cpp:84 +#, no-c-format +msgid "Enable this to append the unit to the title of the display." +msgstr "Bruk denne funksjonen for å leggja eininga til tittelen på ruta." + +#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 83 +#: rc.cpp:93 rc.cpp:150 +#, no-c-format +msgid "E&nable alarm" +msgstr "Slå &på alarm" + +#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 149 +#: rc.cpp:105 rc.cpp:138 +#, no-c-format +msgid "&Enable alarm" +msgstr "&Slå på alarm" + +#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 225 +#: rc.cpp:117 +#, no-c-format +msgid "Normal digit color:" +msgstr "Farge på vanlege siffer:" + +#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 233 +#: rc.cpp:120 +#, no-c-format +msgid "Alarm digit color:" +msgstr "Farge på alarmsiffer:" + +#. i18n: file ./SensorDisplayLib/ListViewSettingsWidget.ui line 90 +#: rc.cpp:168 +#, no-c-format +msgid "Grid color:" +msgstr "Rutefarge:" + +#. i18n: file SystemLoad.sgrd line 5 +#: ksgrd/SensorManager.cc:50 rc.cpp:173 +msgid "CPU Load" +msgstr "Prosessorlast" + +#. i18n: file SystemLoad.sgrd line 10 +#: ksgrd/SensorManager.cc:103 rc.cpp:175 +msgid "Load Average (1 min)" +msgstr "Snittlast (1 min)" + +#. i18n: file SystemLoad.sgrd line 13 +#: ksgrd/SensorManager.cc:56 rc.cpp:177 +msgid "Physical Memory" +msgstr "Fysisk minne" + +#. i18n: file SystemLoad.sgrd line 21 +#: ksgrd/SensorManager.cc:57 rc.cpp:179 +msgid "Swap Memory" +msgstr "Veksleminne" + +#. i18n: file KSysGuardApplet.xml line 5 +#: rc.cpp:181 +msgid "CPU" +msgstr "Prosessor" + +#. i18n: file KSysGuardApplet.xml line 10 +#: rc.cpp:183 +msgid "Mem" +msgstr "Minne" + +#: _translatorinfo.cpp:1 +msgid "" +"_: NAME OF TRANSLATORS\n" +"Your names" +msgstr "Gaute Hvoslef Kvalnes" + +#: _translatorinfo.cpp:3 +msgid "" +"_: EMAIL OF TRANSLATORS\n" +"Your emails" +msgstr "gaute@verdsveven.com" + +#: ksgrd/SensorManager.cc:51 +msgid "Idle Load" +msgstr "Inaktiv-last" + +#: Workspace.cc:100 Workspace.cc:109 ksgrd/SensorManager.cc:52 +#: ksysguard.cc:171 +msgid "System Load" +msgstr "System-last" + +#: ksgrd/SensorManager.cc:53 +msgid "Nice Load" +msgstr "Snill-last" -#: SensorDisplayLib/FancyPlotterSettings.cc:160 -msgid "Enter the number of horizontal lines here." -msgstr "Oppgje talet på horisontale linjer her." +#: ksgrd/SensorManager.cc:54 +msgid "User Load" +msgstr "Brukarlast" -#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 35 -#: SensorDisplayLib/FancyPlotterSettings.cc:168 rc.cpp:132 -#, no-c-format -msgid "Text" -msgstr "Tekst" +#: ksgrd/SensorManager.cc:55 +msgid "Memory" +msgstr "Minne" -#: SensorDisplayLib/FancyPlotterSettings.cc:172 -msgid "Labels" -msgstr "Etikettar" +#: ksgrd/SensorManager.cc:58 +msgid "Cached Memory" +msgstr "Mellomlagra minne" -#: SensorDisplayLib/FancyPlotterSettings.cc:173 -msgid "" -"Check this box if horizontal lines should be decorated with the values they " -"mark." -msgstr "" -"Merk av her dersom horisontale linjer skal merkast med dei verdiane dei " -"representerer." +#: ksgrd/SensorManager.cc:59 +msgid "Buffered Memory" +msgstr "Bufra minne" -#: SensorDisplayLib/FancyPlotterSettings.cc:185 -msgid "Top bar" -msgstr "Topplinje" +#: ksgrd/SensorManager.cc:60 +msgid "Used Memory" +msgstr "Bruka minne" -#: SensorDisplayLib/FancyPlotterSettings.cc:186 -msgid "" -"Check this to active the display title bar. This is probably only useful for " -"applet displays. The bar is only visible if the display is large enough." -msgstr "" -"Merk av her for å visa ei tittellinje. Funksjonen er sannsynlegvis berre nyttig " -"for applet-visingar. Tittelen er berre synleg dersom diagramruta er stor nok." +#: ksgrd/SensorManager.cc:61 +msgid "Application Memory" +msgstr "Programminne" -#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 206 -#: SensorDisplayLib/FancyPlotterSettings.cc:193 rc.cpp:87 rc.cpp:102 -#: rc.cpp:117 rc.cpp:138 -#, no-c-format -msgid "Colors" -msgstr "Fargar" +#: ksgrd/SensorManager.cc:62 +msgid "Free Memory" +msgstr "Ledig minne" -#: SensorDisplayLib/FancyPlotterSettings.cc:196 -msgid "Vertical lines:" -msgstr "Loddrette linjer:" +#: ksgrd/SensorManager.cc:63 +msgid "Process Count" +msgstr "Prosesstal" -#: SensorDisplayLib/FancyPlotterSettings.cc:203 -msgid "Horizontal lines:" -msgstr "Vassrette linjer:" +#: ksgrd/SensorManager.cc:64 ksgrd/SensorManager.cc:148 +msgid "Process Controller" +msgstr "Prosesskontroller" -#: SensorDisplayLib/FancyPlotterSettings.cc:210 -msgid "Background:" -msgstr "Bakgrunn:" +#: ksgrd/SensorManager.cc:65 +msgid "Disk Throughput" +msgstr "Diskgjennomstrøyming" -#: SensorDisplayLib/FancyPlotterSettings.cc:242 -msgid "Set Color..." -msgstr "Vel farge …" +#: ksgrd/SensorManager.cc:66 +msgid "" +"_: CPU Load\n" +"Load" +msgstr "Last" -#: SensorDisplayLib/FancyPlotterSettings.cc:244 -msgid "Push this button to configure the color of the sensor in the diagram." -msgstr "Bruk denne knappen for å setja opp fargen på sensoren i diagrammet." +#: ksgrd/SensorManager.cc:67 +msgid "Total Accesses" +msgstr "Total tilgang" -#: SensorDisplayLib/FancyPlotterSettings.cc:252 -msgid "Move Up" -msgstr "Flytt opp" +#: ksgrd/SensorManager.cc:68 +msgid "Read Accesses" +msgstr "Lesetilgang" -#: SensorDisplayLib/FancyPlotterSettings.cc:256 -msgid "Move Down" -msgstr "Flytt ned" +#: ksgrd/SensorManager.cc:69 +msgid "Write Accesses" +msgstr "Skrivetilgang" -#: SensorDisplayLib/SensorLogger.cc:151 SensorDisplayLib/SensorLoggerDlg.cc:28 -msgid "Sensor Logger" -msgstr "Sensorlogg" +#: ksgrd/SensorManager.cc:70 +msgid "Read Data" +msgstr "Lese data" -#: SensorDisplayLib/SensorDisplay.cc:162 -msgid "Launch &System Guard" -msgstr "Start &systemvakt" +#: ksgrd/SensorManager.cc:71 +msgid "Write Data" +msgstr "Skrive data" -#: SensorDisplayLib/SensorDisplay.cc:166 SensorDisplayLib/SensorLogger.cc:380 -msgid "&Properties" -msgstr "&Eigenskapar" +#: ksgrd/SensorManager.cc:72 +msgid "Pages In" +msgstr "Sider inn" -#: SensorDisplayLib/SensorDisplay.cc:167 SensorDisplayLib/SensorLogger.cc:381 -msgid "&Remove Display" -msgstr "&Fjern rute" +#: ksgrd/SensorManager.cc:73 +msgid "Pages Out" +msgstr "Sider ut" -#: SensorDisplayLib/SensorDisplay.cc:169 -msgid "&Setup Update Interval..." -msgstr "Vel oppdaterings&intervall …" +#: ksgrd/SensorManager.cc:74 +msgid "Context Switches" +msgstr "Kontekstbytingar" -#: SensorDisplayLib/SensorDisplay.cc:171 -msgid "&Continue Update" -msgstr "&Hald fram med oppdatering" +#: ksgrd/SensorManager.cc:75 +msgid "Network" +msgstr "Nettverk" -#: SensorDisplayLib/SensorDisplay.cc:173 -msgid "P&ause Update" -msgstr "&Pause i oppdatering" +#: ksgrd/SensorManager.cc:76 +msgid "Interfaces" +msgstr "Grensesnitt" -#: SensorDisplayLib/SensorDisplay.cc:240 -msgid "" -"" -"

This is a sensor display. To customize a sensor display click and hold the " -"right mouse button on either the frame or the display box and select the " -"Properties entry from the popup menu. Select Remove " -"to delete the display from the worksheet.

%1" -msgstr "" -"" -"

Dette er ei sensorvising. For å tilpassa ei sensorvising, kan du klikka og " -"halda nede høgre museknapp på ramma eller boksen og velja Eigenskapar " -"frå sprettoppmenyen. Vel Fjern for å sletta visinga frå arbeidsarket.

" -"%1" +#: ksgrd/SensorManager.cc:77 +msgid "Receiver" +msgstr "Mottakar" -#: SensorDisplayLib/SensorLogger.cc:136 -msgid "Logging" -msgstr "Loggar" +#: ksgrd/SensorManager.cc:78 +msgid "Transmitter" +msgstr "Sendar" -#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 48 -#: SensorDisplayLib/SensorLogger.cc:137 rc.cpp:18 -#, no-c-format -msgid "Timer Interval" -msgstr "Tidsintervall" +#: ksgrd/SensorManager.cc:79 +msgid "Data" +msgstr "Data" -#: SensorDisplayLib/SensorLogger.cc:138 -msgid "Sensor Name" -msgstr "Sensornamn" +#: ksgrd/SensorManager.cc:80 +msgid "Compressed Packets" +msgstr "Komprimerte pakkar" -#: SensorDisplayLib/SensorLogger.cc:139 -msgid "Host Name" -msgstr "Vertsnamn" +#: ksgrd/SensorManager.cc:81 +msgid "Dropped Packets" +msgstr "Sleppte pakkar" -#: SensorDisplayLib/SensorLogger.cc:140 -msgid "Log File" -msgstr "Loggfil" +#: ksgrd/SensorManager.cc:82 +msgid "Errors" +msgstr "Feil" -#: SensorDisplayLib/SensorLogger.cc:383 -msgid "&Remove Sensor" -msgstr "&Fjern sensor" +#: ksgrd/SensorManager.cc:83 +msgid "FIFO Overruns" +msgstr "FIFO-flaum" -#: SensorDisplayLib/SensorLogger.cc:384 -msgid "&Edit Sensor..." -msgstr "&Rediger sensor …" +#: ksgrd/SensorManager.cc:84 +msgid "Frame Errors" +msgstr "Rammefeil" -#: SensorDisplayLib/SensorLogger.cc:396 -msgid "St&op Logging" -msgstr "St&opp logging" +#: ksgrd/SensorManager.cc:85 +msgid "Multicast" +msgstr "Multikasting" -#: SensorDisplayLib/SensorLogger.cc:398 -msgid "S&tart Logging" -msgstr "S&tart logging" +#: ksgrd/SensorManager.cc:86 +msgid "Packets" +msgstr "Pakkar" -#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 94 -#: SensorDisplayLib/LogFile.cc:88 rc.cpp:141 -#, no-c-format -msgid "Foreground color:" -msgstr "Framgrunnsfarge:" +#: ksgrd/SensorManager.cc:87 +msgid "Carrier" +msgstr "Bærar" -#: SensorDisplayLib/MultiMeterSettings.cc:26 -msgid "Multimeter Settings" -msgstr "Innstillingar for multimeter" +#: ksgrd/SensorManager.cc:88 +msgid "Collisions" +msgstr "Kollisjonar" -#: SensorDisplayLib/ListViewSettings.cc:26 -msgid "List View Settings" -msgstr "Innstillingar for listevising" +#: ksgrd/SensorManager.cc:89 +msgid "Sockets" +msgstr "Soklar" -#: SensorDisplayLib/ReniceDlg.cc:32 -msgid "Renice Process" -msgstr "Endra snillverdi på prosess" +#: ksgrd/SensorManager.cc:90 +msgid "Total Number" +msgstr "Totalt" -#: SensorDisplayLib/ReniceDlg.cc:40 -msgid "" -"You are about to change the scheduling priority of\n" -"process %1. Be aware that only the Superuser (root)\n" -"can decrease the nice level of a process. The lower\n" -"the number is the higher the priority.\n" -"\n" -"Please enter the desired nice level:" -msgstr "" -"Du er i ferd med å endra køyreplanprioriteten til\n" -"prosess %1. Ver klar over at berre superbrukaren (rot)\n" -"kan senka snillverdien på ein prosess. Lågare tal\n" -"gjev høgare prioritet.\n" -"\n" -"Oppgje ønska snillverdi:" +#: ksgrd/SensorManager.cc:91 ksgrd/SensorManager.cc:149 +msgid "Table" +msgstr "Tabell" -#: SensorDisplayLib/SensorLoggerSettings.cc:26 -msgid "Sensor Logger Settings" -msgstr "Innstillingar for sensorlogg" +#: ksgrd/SensorManager.cc:92 +msgid "Advanced Power Management" +msgstr "Avansert straumstyring" -#: SensorDisplayLib/DummyDisplay.cc:33 -msgid "Drop Sensor Here" -msgstr "Slepp sensor her" +#: ksgrd/SensorManager.cc:93 +msgid "ACPI" +msgstr "ACPI" -#: SensorDisplayLib/DummyDisplay.cc:38 -msgid "" -"This is an empty space in a worksheet. Drag a sensor from the Sensor Browser " -"and drop it here. A sensor display will appear that allows you to monitor the " -"values of the sensor over time." -msgstr "" -"Dette er eit tomt felt i eit arbeidsområde. Dra ein sensor frå sensorlesaren og " -"slepp han her. Ei sensorrute viser då verdiane til sensoren over tid." +#: ksgrd/SensorManager.cc:94 +msgid "Thermal Zone" +msgstr "Temperatursone" -#: SensorDisplayLib/ProcessController.cc:54 -msgid "Name" -msgstr "Namn" +#: ksgrd/SensorManager.cc:95 +msgid "Temperature" +msgstr "Temperatur" -#: SensorDisplayLib/ProcessController.cc:55 -msgid "PID" -msgstr "PID" +#: ksgrd/SensorManager.cc:96 +msgid "Fan" +msgstr "Vifte" -#: SensorDisplayLib/ProcessController.cc:56 -msgid "PPID" -msgstr "PPID" +#: ksgrd/SensorManager.cc:97 +msgid "State" +msgstr "Tilstand" -#: SensorDisplayLib/ProcessController.cc:57 -msgid "UID" -msgstr "UID" +#: ksgrd/SensorManager.cc:98 +msgid "Battery" +msgstr "Batteri" -#: SensorDisplayLib/ProcessController.cc:58 -msgid "GID" -msgstr "GID" +#: ksgrd/SensorManager.cc:99 +msgid "Battery Charge" +msgstr "Batterilading" -#: SensorDisplayLib/ProcessController.cc:60 -#, c-format -msgid "User%" -msgstr "Brukar%" +#: ksgrd/SensorManager.cc:100 +msgid "Battery Usage" +msgstr "Batteribruk" -#: SensorDisplayLib/ProcessController.cc:61 -#, c-format -msgid "System%" -msgstr "System%" +#: ksgrd/SensorManager.cc:101 +msgid "Remaining Time" +msgstr "Tid att" -#: SensorDisplayLib/ProcessController.cc:63 -msgid "VmSize" -msgstr "VmSize" +#: ksgrd/SensorManager.cc:102 +msgid "Interrupts" +msgstr "Avbrot" -#: SensorDisplayLib/ProcessController.cc:64 -msgid "VmRss" -msgstr "VmRss" +#: ksgrd/SensorManager.cc:104 +msgid "Load Average (5 min)" +msgstr "Snittlast (5 min)" -#: SensorDisplayLib/ProcessController.cc:65 -msgid "Login" -msgstr "Innlogging" +#: ksgrd/SensorManager.cc:105 +msgid "Load Average (15 min)" +msgstr "Snittlast (15 min)" -#: SensorDisplayLib/ProcessController.cc:66 -msgid "Command" -msgstr "Kommando" +#: ksgrd/SensorManager.cc:106 +msgid "Clock Frequency" +msgstr "Klokkefrekvens" -#: SensorDisplayLib/ProcessController.cc:97 -msgid "All Processes" -msgstr "Alle prosessar" +#: ksgrd/SensorManager.cc:107 +msgid "Hardware Sensors" +msgstr "Maskinvaresensorar" -#: SensorDisplayLib/ProcessController.cc:98 -msgid "System Processes" -msgstr "Systemprosessar" +#: ksgrd/SensorManager.cc:108 +msgid "Partition Usage" +msgstr "Partisjonsbruk" -#: SensorDisplayLib/ProcessController.cc:99 -msgid "User Processes" -msgstr "Brukarprosessar" +#: ksgrd/SensorManager.cc:109 +msgid "Used Space" +msgstr "Bruka plass" -#: SensorDisplayLib/ProcessController.cc:100 -msgid "Own Processes" -msgstr "Eigne prosessar" +#: ksgrd/SensorManager.cc:110 +msgid "Free Space" +msgstr "Ledig plass" -#: SensorDisplayLib/ProcessController.cc:103 -msgid "&Tree" -msgstr "&Tre" +#: ksgrd/SensorManager.cc:111 +msgid "Fill Level" +msgstr "Fyllnivå" -#: SensorDisplayLib/ProcessController.cc:116 -msgid "&Refresh" -msgstr "&Frisk opp" +#: ksgrd/SensorManager.cc:115 +#, c-format +msgid "CPU%1" +msgstr "Prosessor%1" -#: SensorDisplayLib/ProcessController.cc:123 -msgid "&Kill" -msgstr "&Drep" +#: ksgrd/SensorManager.cc:117 +#, c-format +msgid "Disk%1" +msgstr "Disk%1" -#: SensorDisplayLib/ProcessController.cc:206 -msgid "%1: Running Processes" -msgstr "%1: Prosessar som køyrer" +#: ksgrd/SensorManager.cc:122 +#, c-format +msgid "Fan%1" +msgstr "Vifte%1" -#: SensorDisplayLib/ProcessController.cc:239 -msgid "You need to select a process first." -msgstr "Du må velja ein prosess først." +#: ksgrd/SensorManager.cc:124 +#, c-format +msgid "Temperature%1" +msgstr "Temperatur%1" -#: SensorDisplayLib/ProcessController.cc:245 +#: ksgrd/SensorManager.cc:127 +msgid "Total" +msgstr "Totalt" + +#: ksgrd/SensorManager.cc:133 #, c-format +msgid "Int%1" +msgstr "Avbrot%1" + +#: ksgrd/SensorManager.cc:140 msgid "" -"_n: Do you want to kill the selected process?\n" -"Do you want to kill the %n selected processes?" -msgstr "" -"Vil du drepa den valde prosessen?\n" -"Vil du drepa dei valde %n prosessane?" +"_: the unit 1 per second\n" +"1/s" +msgstr "1/s" -#: SensorDisplayLib/ProcessController.cc:248 -msgid "Kill Process" -msgstr "Drep prossess" +#: ksgrd/SensorManager.cc:141 +msgid "kBytes" +msgstr "KB" -#: SensorDisplayLib/ProcessController.cc:252 -msgid "Kill" -msgstr "Drep" +#: ksgrd/SensorManager.cc:142 +msgid "" +"_: the unit minutes\n" +"min" +msgstr "min" -#: SensorDisplayLib/ProcessController.cc:258 -msgid "Do not ask again" -msgstr "Ikkje spør igjen" +#: ksgrd/SensorManager.cc:143 +msgid "" +"_: the frequency unit\n" +"MHz" +msgstr "MHz" -#: SensorDisplayLib/ProcessController.cc:344 -#, c-format -msgid "Error while attempting to kill process %1." -msgstr "Feil ved dreping av prosessen %1." +#: ksgrd/SensorManager.cc:146 +msgid "Integer Value" +msgstr "Heiltalsverdi" -#: SensorDisplayLib/ProcessController.cc:349 -#, c-format -msgid "Insufficient permissions to kill process %1." -msgstr "Ikkje tilstrekkeleg løyve til å drepa prosessen %1." +#: ksgrd/SensorManager.cc:147 +msgid "Floating Point Value" +msgstr "Flyttalsverdi" -#: SensorDisplayLib/ProcessController.cc:354 -#: SensorDisplayLib/ProcessController.cc:389 -msgid "Process %1 has already disappeared." -msgstr "Prosessen %1 er alt borte." +#: ksgrd/SensorManager.cc:289 +msgid "Connection to %1 has been lost." +msgstr "Tilkoplinga til %1 er broten." -#: SensorDisplayLib/ProcessController.cc:358 -msgid "Invalid Signal." -msgstr "Ugyldig signal." +#: ksgrd/StyleSettings.cc:41 +msgid "Global Style Settings" +msgstr "Globale stilinnstillingar" -#: SensorDisplayLib/ProcessController.cc:379 -#, c-format -msgid "Error while attempting to renice process %1." -msgstr "Feil ved endring av snillverdi på prosessen %1." +#: ksgrd/StyleSettings.cc:44 +msgid "Display Style" +msgstr "Visingsstil" -#: SensorDisplayLib/ProcessController.cc:384 +#: ksgrd/StyleSettings.cc:47 +msgid "First foreground color:" +msgstr "Første framgrunnsfarge:" + +#: ksgrd/StyleSettings.cc:54 +msgid "Second foreground color:" +msgstr "Andre framgrunnsfarge:" + +#: ksgrd/StyleSettings.cc:85 +msgid "Sensor Colors" +msgstr "Sensorfargar" + +#: ksgrd/StyleSettings.cc:91 +msgid "Change Color..." +msgstr "Endra farge …" + +#: ksgrd/StyleSettings.cc:166 #, c-format -msgid "Insufficient permissions to renice process %1." -msgstr "Ikkje tilstrekkeleg løyve til å endra snillverdi på prosessen %1." +msgid "Color %1" +msgstr "Farge %1" -#: SensorDisplayLib/ProcessController.cc:393 -msgid "Invalid argument." -msgstr "Ugyldig argument." +#: ksgrd/SensorSocketAgent.cc:104 +msgid "Connection to %1 refused" +msgstr "Nekta tilgang til %1" + +#: ksgrd/SensorSocketAgent.cc:108 +msgid "Host %1 not found" +msgstr "Fann ikkje verten %1" -#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 89 -#: rc.cpp:27 rc.cpp:78 -#, no-c-format -msgid "&Enable alarm" -msgstr "&Slå på alarm" +#: ksgrd/SensorSocketAgent.cc:112 +#, c-format +msgid "Timeout at host %1" +msgstr "Tidsavbrot ved verten %1" -#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 155 -#: rc.cpp:39 rc.cpp:66 -#, no-c-format -msgid "E&nable alarm" -msgstr "Slå &på alarm" +#: ksgrd/SensorSocketAgent.cc:116 +#, c-format +msgid "Network failure host %1" +msgstr "Nettverksfeil ved verten %1" -#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 44 -#: rc.cpp:54 -#, no-c-format -msgid "&Show unit" -msgstr "&Vis eining" +#: ksgrd/TimerSettings.cc:36 +msgid "Timer Settings" +msgstr "Innstillingar for tidtakar" -#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 47 -#: rc.cpp:57 -#, no-c-format -msgid "Enable this to append the unit to the title of the display." -msgstr "Bruk denne funksjonen for å leggja eininga til tittelen på ruta." +#: ksgrd/TimerSettings.cc:43 +msgid "Use update interval of worksheet" +msgstr "Bruk oppdateringsintervallet til arbeidsarket" -#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 225 -#: rc.cpp:90 -#, no-c-format -msgid "Normal digit color:" -msgstr "Farge på vanlege siffer:" +#: WorkSheetSettings.cc:99 ksgrd/TimerSettings.cc:54 +msgid "All displays of the sheet are updated at the rate specified here." +msgstr "Alle visingane av arket vert oppdaterte så ofte som spesifisert her." -#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 233 -#: rc.cpp:93 -#, no-c-format -msgid "Alarm digit color:" -msgstr "Farge på alarmsiffer:" +#: ksgrd/HostConnector.cc:37 +msgid "Connect Host" +msgstr "Kopla til vert" -#. i18n: file ./SensorDisplayLib/ListViewSettingsWidget.ui line 82 -#: rc.cpp:105 rc.cpp:120 -#, no-c-format -msgid "Text color:" -msgstr "Tekstfarge:" +#: ksgrd/HostConnector.cc:44 +msgid "Host:" +msgstr "Vert:" -#. i18n: file ./SensorDisplayLib/ListViewSettingsWidget.ui line 90 -#: rc.cpp:108 -#, no-c-format -msgid "Grid color:" -msgstr "Rutefarge:" +#: ksgrd/HostConnector.cc:54 +msgid "Enter the name of the host you want to connect to." +msgstr "Oppgje namnet på verten du vil kopla til." -#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 17 -#: rc.cpp:129 -#, no-c-format -msgid "Log File Settings" -msgstr "Innstillingar for loggfil" +#: ksgrd/HostConnector.cc:61 +msgid "Connection Type" +msgstr "Tilkoplingstype" -#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 187 -#: rc.cpp:150 -#, no-c-format -msgid "Select Font..." -msgstr "Vel skrift …" +#: ksgrd/HostConnector.cc:66 +msgid "ssh" +msgstr "ssh" -#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 199 -#: rc.cpp:153 -#, no-c-format -msgid "Filter" -msgstr "Filter" +#: ksgrd/HostConnector.cc:69 +msgid "Select this to use the secure shell to login to the remote host." +msgstr "Vel dette for å bruka «Secure shell» for å logga inn på verten." -#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 238 -#: rc.cpp:156 -#, no-c-format -msgid "&Add" -msgstr "&Legg til" +#: ksgrd/HostConnector.cc:72 +msgid "rsh" +msgstr "rsh" -#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 254 -#: rc.cpp:162 -#, no-c-format -msgid "&Change" -msgstr "&Endra" +#: ksgrd/HostConnector.cc:73 +msgid "Select this to use the remote shell to login to the remote host." +msgstr "Vel dette for å bruka «Remote shell» for å logga inn på verten." -#. i18n: file KSysGuardApplet.xml line 5 -#: rc.cpp:181 -msgid "CPU" -msgstr "Prosessor" +#: ksgrd/HostConnector.cc:76 +msgid "Daemon" +msgstr "Demon" -#. i18n: file KSysGuardApplet.xml line 10 -#: rc.cpp:183 -msgid "Mem" -msgstr "Minne" +#: ksgrd/HostConnector.cc:77 +msgid "" +"Select this if you want to connect to a ksysguard daemon that is running on the " +"machine you want to connect to, and is listening for client requests." +msgstr "" +"Vel dette dersom du vil kopla til ein ksysguard-demon som lyttar etter " +"klientførespurnader på den maskina du vil kopla til." -#: WorkSheetSettings.cc:41 -msgid "Worksheet Properties" -msgstr "Innstillingar for arbeidsark" +#: ksgrd/HostConnector.cc:80 +msgid "Custom command" +msgstr "Annan kommando" -#: WorkSheetSettings.cc:67 -msgid "Rows:" -msgstr "Rader:" +#: ksgrd/HostConnector.cc:81 +msgid "" +"Select this to use the command you entered below to start ksysguardd on the " +"remote host." +msgstr "" +"Vel dette for å bruka kommandoen du oppgjev under for å starta ksysguardd på " +"verten." -#: WorkSheetSettings.cc:76 -msgid "Columns:" -msgstr "Kolonnar:" +#: ksgrd/HostConnector.cc:84 +msgid "Port:" +msgstr "Port:" -#: WorkSheetSettings.cc:97 -msgid "Enter the number of rows the sheet should have." -msgstr "Oppgje talet på rader i arket." +#: ksgrd/HostConnector.cc:90 +msgid "" +"Enter the port number on which the ksysguard daemon is listening for " +"connections." +msgstr "Oppgje portnummeret der ksysguard-demonen lyttar etter tilkoplingar." -#: WorkSheetSettings.cc:98 -msgid "Enter the number of columns the sheet should have." -msgstr "Oppgje talet på kolonnar i arbeidsarket." +#: ksgrd/HostConnector.cc:93 +msgid "e.g. 3112" +msgstr "t.d. 3112" -#: WorkSheetSettings.cc:100 -msgid "Enter the title of the worksheet here." -msgstr "Skriv tittelen på arbeidsarket her." +#: ksgrd/HostConnector.cc:96 +msgid "Command:" +msgstr "Kommando:" -#: KSysGuardApplet.cc:212 -msgid "&Dancing Bars" -msgstr "&Dansande stolpar" +#: ksgrd/HostConnector.cc:105 +msgid "Enter the command that runs ksysguardd on the host you want to monitor." +msgstr "Oppgje kommandoen som startar ksysguardd på verten du vil overvaka." -#: KSysGuardApplet.cc:242 KSysGuardApplet.cc:394 -msgid "" -"The KSysGuard applet does not support displaying of this type of sensor. Please " -"choose another sensor." -msgstr "" -"Systemvakt-appleten støttar ikkje vising av denne sensortypen. Vel ein annan " -"sensor." +#: ksgrd/HostConnector.cc:109 +msgid "e.g. ssh -l root remote.host.org ksysguardd" +msgstr "t.d. ssh -l root vert.nettverk.org ksysguardd" -#: KSysGuardApplet.cc:334 +#: ksgrd/SensorAgent.cc:88 msgid "" -"The file %1 does not contain a valid applet definition, which must have a " -"document type 'KSysGuardApplet'." +"Message from %1:\n" +"%2" msgstr "" -"Fila %1 inneheld ingen gyldig appletdefinisjon, som må ha dokumenttypen " -"«KSysGuardWorkApplet»." - -#: KSysGuardApplet.cc:488 -msgid "Drag sensors from the TDE System Guard into this cell." -msgstr "Dra sensorar frå TDE Systemvakt til denne cella." +"Melding frå %1:\n" +"%2" #: SensorBrowser.cc:77 msgid "Sensor Browser" @@ -1596,6 +1524,30 @@ msgstr "" msgid "Drag sensors to empty fields in a worksheet." msgstr "Dra sensorar til tomme felt i eit arbeidsområde." +#: WorkSheetSettings.cc:41 +msgid "Worksheet Properties" +msgstr "Innstillingar for arbeidsark" + +#: WorkSheetSettings.cc:67 +msgid "Rows:" +msgstr "Rader:" + +#: WorkSheetSettings.cc:76 +msgid "Columns:" +msgstr "Kolonnar:" + +#: WorkSheetSettings.cc:97 +msgid "Enter the number of rows the sheet should have." +msgstr "Oppgje talet på rader i arket." + +#: WorkSheetSettings.cc:98 +msgid "Enter the number of columns the sheet should have." +msgstr "Oppgje talet på kolonnar i arbeidsarket." + +#: WorkSheetSettings.cc:100 +msgid "Enter the title of the worksheet here." +msgstr "Skriv tittelen på arbeidsarket her." + #: ksysguard.cc:64 msgid "TDE system guard" msgstr "TDE Systemvakt" @@ -1668,6 +1620,10 @@ msgstr "Nullstill alle arbeidsark" msgid "Reset" msgstr "Tilbakestill" +#: Workspace.cc:105 ksysguard.cc:176 +msgid "Process Table" +msgstr "Prosesstabell" + #: ksysguard.cc:436 #, c-format msgid "" @@ -1710,3 +1666,48 @@ msgstr "" "Solaris-støtte\n" "Nokre delar er baserte på (med løyve)\n" "sunos5-modulen til «top»-verktøyet frå William LeFebvre." + +#: Workspace.cc:53 +msgid "" +"This is your work space. It holds your worksheets. You need to create a new " +"worksheet (Menu File->New) before you can drag sensors here." +msgstr "" +"Dette er arbeidsområdet, der du arbeidsarka. Du må laga eit nytt arbeidsark " +"(menyval Fil->Ny) før du kan dra sensorar hit." + +#: Workspace.cc:135 +#, c-format +msgid "Sheet %1" +msgstr "Område %1" + +#: Workspace.cc:165 Workspace.cc:305 +msgid "" +"The worksheet '%1' contains unsaved data.\n" +"Do you want to save the worksheet?" +msgstr "" +"Arbeidsområdet «%1» inneheld ulagra data.\n" +"Vil du lagra arbeidsområdet?" + +#: Workspace.cc:181 Workspace.cc:235 +msgid "*.sgrd|Sensor Files" +msgstr "*.sgrd|Sensorfiler" + +#: Workspace.cc:184 +msgid "Select Worksheet to Load" +msgstr "Vel eit arbeidsark som skal lastast" + +#: Workspace.cc:229 Workspace.cc:269 +msgid "You do not have a worksheet that could be saved." +msgstr "Det finst ingen arbeidsområde som kan lagrast." + +#: Workspace.cc:239 +msgid "Save Current Worksheet As" +msgstr "Lagra arbeidsarket som" + +#: Workspace.cc:320 +msgid "There are no worksheets that could be deleted." +msgstr "Det finst ingen arbeidsområde som kan slettast." + +#: Workspace.cc:448 +msgid "Cannot find file ProcessTable.sgrd." +msgstr "Finn ikkje fila ProcessTable.sgrd." -- cgit v1.2.1