From 242434109c14a494dee7738b9c343f5947d20506 Mon Sep 17 00:00:00 2001 From: Timothy Pearson Date: Mon, 29 Sep 2014 03:08:03 -0500 Subject: Automated l10n update (.po files) --- tde-i18n-se/messages/tdelibs/tdeprint.po | 7155 +++++++++++++++--------------- 1 file changed, 3580 insertions(+), 3575 deletions(-) (limited to 'tde-i18n-se/messages/tdelibs/tdeprint.po') diff --git a/tde-i18n-se/messages/tdelibs/tdeprint.po b/tde-i18n-se/messages/tdelibs/tdeprint.po index 2a9343d7784..94cdcd5e10e 100644 --- a/tde-i18n-se/messages/tdelibs/tdeprint.po +++ b/tde-i18n-se/messages/tdelibs/tdeprint.po @@ -11,288 +11,392 @@ msgid "" msgstr "" "Project-Id-Version: tdeprint\n" -"POT-Creation-Date: 2007-08-27 01:12+0200\n" +"POT-Creation-Date: 2014-09-29 00:46-0500\n" "PO-Revision-Date: 2007-03-06 22:54+0100\n" "Last-Translator: Børre Gaup \n" "Language-Team: Northern Sami \n" +"Language: se\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 1.11.4\n" -#: ext/kextprinterimpl.cpp:47 -msgid "Empty print command." -msgstr "Guorus čálihangohččun" - -#: ext/kmextmanager.cpp:41 -msgid "PS_printer" -msgstr "PS_printer" - -#: ext/kmextmanager.cpp:43 -msgid "PostScript file generator" -msgstr "PostScript-fiilaráhkadeaddji" - -#: kpgeneralpage.cpp:88 lpd/lpdtools.cpp:28 -msgid "Ledger" -msgstr "Ledger" - -#: kpgeneralpage.cpp:87 lpd/lpdtools.cpp:29 -msgid "US Legal" -msgstr "US Legal" - -#: kpgeneralpage.cpp:86 lpd/lpdtools.cpp:30 -msgid "US Letter" -msgstr "US Letter" +#: ppdloader.cpp:173 +msgid "(line %1): " +msgstr "(linnjá %1): " -#: lpd/lpdtools.cpp:31 -msgid "A4" -msgstr "A4" +#: marginpreview.cpp:135 +msgid "No preview available" +msgstr "Ovdačájeheapmi ii leat olamuttus" -#: lpd/lpdtools.cpp:32 -msgid "A3" -msgstr "A3" +#: kmfactory.cpp:221 +msgid "There was an error loading %1. The diagnostic is:

%2

" +msgstr "Meattáhus vieččadettiin %1. Diagnosa lea:

%2

" -#: lpd/lpdtools.cpp:33 -msgid "B4" -msgstr "B4" +#: kprintdialog.cpp:97 +#, fuzzy +msgid "" +" Printer Location: The Location may describe where the " +"selected printer is located. The Location description is created by the " +"administrator of the print system (or may be left empty). " +msgstr "" +"Čujuhus sáhttá muitalit gos válljejuvvon čálán lea. " +"Vuogádathálddašeaddji ráhkada čálihanvuogádaga báike-válddahusa (dahje guođđá " +"dan guorusin)." -#: lpd/lpdtools.cpp:34 -msgid "B5" -msgstr "B5" +#: kprintdialog.cpp:102 +#, fuzzy +msgid "" +" Printer Type: The Type indicates your printer type. " +msgstr "Šládja lea čálánšládja." -#: kpgeneralpage.cpp:416 lpd/lpdtools.cpp:39 lpr/editentrydialog.cpp:50 -msgid "Enabled" -msgstr "Alde" +#: kprintdialog.cpp:104 +#, fuzzy +msgid "" +" Printer State: The State indicates the state of the print " +"queue on the print server (which could be your localhost). The state may be " +"'Idle', 'Processing', 'Stopped', 'Paused' or similar. " +msgstr "" +"Dilli muitala čálihangárgadusa dili čálihanbálvás (mii sáhttá leat " +"du báikkálaš mašiinnas). Dille sáhttá leat «Ealjoheapme», «Vuodjimin», " +"«Bissehuvvon», «Boddu» dahje juoga nu." -#: kpgeneralpage.cpp:415 lpd/lpdtools.cpp:40 management/kmconfiggeneral.cpp:52 -msgid "Disabled" -msgstr "Eret" +#: kprintdialog.cpp:108 +#, fuzzy +msgid "" +" Printer Comment: The Comment may describe the selected " +"printer. This comment is created by the administrator of the print system (or " +"may be left empty). " +msgstr "" +"Kommeanta sáhttá muitalit válljejuvvon čálána birra. " +"Vuogádathálddašeaddji ráhkada kommeantta (dahje guođđá dan guorusin)." -#: lpd/lpdtools.cpp:233 -msgid "GhostScript settings" -msgstr "GhostScript-heivehusat" +#: kprintdialog.cpp:112 +#, fuzzy +msgid "" +" Printer Selection Menu: " +"

Use this combo box to select the printer to which you want to print. " +"Initially (if you run TDEPrint for the first time), you may only find the " +"TDE special printers (which save jobs to disk [as PostScript- or " +"PDF-files], or deliver jobs via email (as a PDF attachment). If you are missing " +"a real printer, you need to... " +"

    " +"
  • ...either create a local printer with the help of the " +"TDE Add Printer Wizard. The Wizard is available for the CUPS and RLPR " +"printing systems (click button to the left of the 'Properties' " +"button),
    • " +"
  • ...or try to connect to an existing remote CUPS print server. You can " +"connect by clicking the 'System Options' button below. A new dialog " +"opens: click on the 'CUPS server' icon: Fill in the information " +"required to use the remote server.
" +"

Note: It may happen that you successfully connected to a remote CUPS " +"server and still do not get a printer list. If this happens: force TDEPrint to " +"re-load its configuration files. To reload the configuration files, either " +"start kprinter again, or use the switch the print system away from CUPS and " +"back again once. The print system switch can be made through a selection in " +"the drop-down menu at bottom of this dialog when fully expanded).

" +msgstr "" +" Dán lotnolasbovssas válljet guđe čálániin čálihat. Jus gávnnat dušše " +"TDE erenoamáščálániid – mat vurkejit bargguid skearrui (PostScript- dahje " +"PDF-fiilan), dahje sáddejit bargguid e-boastta bokte (PDF-mielddusin) – muhto " +"váilot albma čálána, de fertet …" -#: lpd/lpdtools.cpp:239 management/kmpropdriver.cpp:53 -#: management/kmwend.cpp:104 -msgid "Driver" -msgstr "Stivrran" +#: kprintdialog.cpp:137 +msgid "" +" Print Job Properties: " +"

This button opens a dialog where you can make decisions regarding all " +"supported print job options. " +msgstr "" -#: lpd/lpdtools.cpp:254 -msgid "Resolution" -msgstr "Čuokkisčoahkku" +#: kprintdialog.cpp:141 +msgid "" +" Selective View on List of Printers: " +"

This button reduces the list of visible printers to a shorter, more " +"convenient, pre-defined list.

" +"

This is particularly useful in enterprise environments with lots of " +"printers. The default is to show all printers.

" +"

To create a personal 'selective view list', click on the " +"'System Options' button at the bottom of this dialog. Then, in the new " +"dialog, select 'Filter' (left column in the " +"TDE Print Configuration dialog) and setup your selection..

" +"

Warning: Clicking this button without prior creation of a personal " +"'selective view list' will make all printers dissappear from the " +"view. (To re-enable all printers, just click this button again.)

" +msgstr "" -#: lpd/lpdtools.cpp:277 -msgid "Color depth" -msgstr "Ivdnečikŋodat" +#: kprintdialog.cpp:154 +msgid "" +"TDE Add Printer Wizard " +"

This button starts the TDE Add Printer Wizard.

" +"

Use the Wizard (with \"CUPS\" or \"RLPR\"" +") to add locally defined printers to your system.

" +"

Note: The TDE Add Printer Wizard does not " +"work, and this button is disabled if you use \"Generic LPD\", " +"\"LPRng\", or \"Print Through an External Program\".)

" +msgstr "" -#: lpd/lpdtools.cpp:301 -msgid "Additional GS options" -msgstr "Lassi GS-molssaeavttut" +#: kprintdialog.cpp:163 +msgid "" +" External Print Command " +"

Here you can enter any command that would also print for you in a " +"konsole window.

Example: " +"
a2ps -P <printername> --medium=A3
. " +msgstr "" -#: driver.cpp:377 kpgeneralpage.cpp:260 lpd/lpdtools.cpp:307 -#: management/kmconfiggeneral.cpp:44 management/kmpropgeneral.cpp:54 -#: management/kmwend.cpp:49 -msgid "General" -msgstr "Oppalaš" +#: kprintdialog.cpp:168 +#, fuzzy +msgid "" +" Additional Print Job Options " +"

This button shows or hides additional printing options." +msgstr " Dát boallu čájeha dahje čiehká lasi čálihanmolssaeavttuid." -#: lpd/lpdtools.cpp:313 -msgid "Page size" -msgstr "Sidosturrodat" +#: kprintdialog.cpp:170 +msgid "" +" System Options: " +"

This button starts a new dialog where you can adjust various settings of " +"your printing system. Amongst them: " +"

    " +"
  • Should \tDE applications embed all fonts into the PostScript they generate " +"for printing? " +"
  • Should TDE use an external PostScript viewer like gv " +"for print page previews? " +"
  • Should TDEPrint use a local or a remote CUPS server?,
" +"and many more.... " +msgstr "" -#: lpd/lpdtools.cpp:329 -msgid "Pages per sheet" -msgstr "Siiddu juohke árkii" +#: kprintdialog.cpp:182 +#, fuzzy +msgid "" +" Help: This button takes you to the complete TDEPrint Manual" +". " +msgstr " Dát boallu doalvu du TDEPrint-giehtagirjái." -#: lpd/lpdtools.cpp:345 -msgid "Left/right margin (1/72 in)" -msgstr "Gurut-/olgešsiidoravda (1/72 duma)" +#: kprintdialog.cpp:186 +#, fuzzy +msgid "" +" Cancel: This button cancels your print job and quits the kprinter " +"dialog. " +msgstr "" +" Dát boallu gaskkalduhttá du čálihanbargguid ja heaittiha " +"kprinter-láseža." -#: lpd/lpdtools.cpp:350 -msgid "Top/bottom margin (1/72 in)" -msgstr "Bajil-/vuolilsiidoravda (1/72 duma)" +#: kprintdialog.cpp:190 +#, fuzzy +msgid "" +" Print: This button sends the job to the printing process. If you " +"are sending non-PostScript files, you may be asked if you want TDE to convert " +"the files into PostScript, or if you want your print subsystem (like CUPS) to " +"do this. " +msgstr "" +" Dát boallu sádde barggu čálihanprosessii. Jos sáddet " +"eai-PostScrpt-fiillaid, de fertet veardidit jos TDE galgá jorgalit fiilla " +"PostScript:ii dahje jos čálihanvuogádat (nugo CUPS) galgá dan bargat." -#: lpd/lpdtools.cpp:356 -msgid "Text options" -msgstr "Teakstamolssaeavttut" +#: kprintdialog.cpp:196 +msgid "" +" Keep Printing Dialog Open" +"

If you enable this checkbox, the printing dialog stays open after you hit " +"the Print button.

" +"

This is especially useful, if you need to test various print settings (like " +"color matching for an inkjet printer) or if you want to send your job to " +"multiple printers (one after the other) to have it finished more quickly.

" +"" +msgstr "" -#: lpd/lpdtools.cpp:362 -msgid "Send EOF after job to eject page" -msgstr "Sádde EOF maŋŋá go barggu vai bálkestit árkka olggos" +#: kprintdialog.cpp:206 +msgid "" +" Output File Name and Path: The \"Output file:\" shows you where " +"your file will be saved if you decide to \"Print to File\" your job, using one " +"of the TDE Special Printers named \"Print to File (PostScript)\" or " +"\"Print to File (PDF)\". Choose a name and location that suits your need by " +"using the button and/or editing the line on the right. " +msgstr "" -#: lpd/lpdtools.cpp:370 -msgid "Fix stair-stepping text" -msgstr "Divo trahppateavstta" +#: kprintdialog.cpp:214 +msgid "" +" Output File Name and Path: Edit this line to create a path and " +"filename that suits your needs. (Button and Lineedit field are only available " +"if you \"Print to File\") " +msgstr "" -#: lpd/lpdtools.cpp:382 -msgid "Fast text printing (non-PS printers only)" -msgstr "Jođánis teakstačáliheapmi (dušše eai-PS čálánat)" +#: kprintdialog.cpp:219 +msgid "" +" Browse Directories button: This button calls the \"File Open / " +"Browsed Directories\" dialog to let you choose a directory and file name where " +"your \"Print-to-File\" job should be saved. " +msgstr "" -#: lpd/klpdprinterimpl.cpp:46 rlpr/krlprprinterimpl.cpp:53 +#: kprintdialog.cpp:225 msgid "" -"The %1 executable could not be found in your path. Check your " -"installation." +" Add File to Job " +"

This button calls the \"File Open / Browse Directories\" dialog to allow you " +"to select a file for printing. Note, that " +"

    " +"
  • you can select ASCII or International Text, PDF, PostScript, JPEG, TIFF, " +"PNG, GIF and many other graphical formats. " +"
  • you can select various files from different paths and send them as one " +"\"multi-file job\" to the printing system.
" msgstr "" -"Prográmmafiila %1 ii gávdnon du ohcanbálgás. Dárkkis du sajáiduhttima." -#: lpd/kmlpduimanager.cpp:44 -msgid "Local printer (parallel, serial, USB)" -msgstr "Báikkálaš čálán (bálddalas, maŋŋálas, USB)" +#: kprintdialog.cpp:237 +msgid "" +" Print Preview Enable this checkbox if you want to see a preview of " +"your printout. A preview lets you check if, for instance, your intended " +"\"poster\" or \"pamphlet\" layout looks like you expected, without wasting " +"paper first. It also lets you cancel the job if something looks wrong. " +"

Note: The preview feature (and therefore this checkbox) is only " +"visible for printjobs created from inside TDE applications. If you start " +"kprinter from the commandline, or if you use kprinter as a print command for " +"non-TDE applications (like Acrobat Reader, Firefox or OpenOffice), print " +"preview is not available here. " +msgstr "" -#: lpd/kmlpduimanager.cpp:45 management/kmpropbackend.cpp:68 -#: rlpr/kmwrlpr.cpp:116 -msgid "Remote LPD queue" -msgstr "Gáiddus LPD-gárgadas" +#: kprintdialog.cpp:250 +msgid "" +" Set as Default Printer This button sets the current printer as the " +"user's default. " +"

Note: (Button is only visible if the checkbox for " +"System Options --> General --> Miscellaneous: " +"\"Defaults to the last printer used in the application\" " +"is disabled.) " +msgstr "" -#: lpd/kmlpduimanager.cpp:46 -msgid "SMB shared printer (Windows)" -msgstr "SMB-juohkkejuvvon čálán (Windows)" +#: kprintdialog.cpp:265 management/kmmainview.cpp:289 management/kmwend.cpp:90 +#: management/smbview.cpp:43 +msgid "Printer" +msgstr "Čálán" -#: lpd/kmlpduimanager.cpp:47 -msgid "Network printer (TCP)" -msgstr "Fierpmádatčálán (TCP)" +#: kprintdialog.cpp:278 management/kmspecialprinterdlg.cpp:56 +#: management/kxmlcommanddlg.cpp:114 +msgid "&Name:" +msgstr "&Namma:" -#: lpd/kmlpduimanager.cpp:48 -msgid "File printer (print to file)" -msgstr "Čálit fiilii" +#: kprintdialog.cpp:280 management/kminfopage.cpp:50 +msgid "" +"_: Status\n" +"State:" +msgstr "Dilli:" -#: lpd/kmlpdmanager.cpp:87 -msgid "Local printer queue (%1)" -msgstr "Báikkálaš čálángárgadas (%1)" +#: kprintdialog.cpp:282 management/kminfopage.cpp:48 +msgid "Type:" +msgstr "Šládja:" -#: lpd/kmlpdmanager.cpp:87 -msgid "" -"_: Unknown type of local printer queue\n" -"Unknown" -msgstr "Amas" +#: kprintdialog.cpp:284 management/kmwname.cpp:40 +msgid "Location:" +msgstr "Čujuhus:" -#: lpd/kmlpdmanager.cpp:88 -msgid "" -msgstr "" +#: kprintdialog.cpp:286 management/kxmlcommanddlg.cpp:176 +msgid "Comment:" +msgstr "Kommeanta:" -#: lpd/kmlpdmanager.cpp:89 -msgid "" -"_: Unknown Driver\n" -"Unknown" -msgstr "Amas" +#: kprintdialog.cpp:289 +msgid "P&roperties" +msgstr "&Iesvuođat …" -#: lpd/kmlpdmanager.cpp:95 -msgid "Remote LPD queue %1@%2" -msgstr "Gáiddus LPD-gárgadas, %1@%2" +#: kprintdialog.cpp:291 +msgid "System Op&tions" +msgstr "&Vuogádatmolssaeavttut" -#: lpd/kmlpdmanager.cpp:158 -msgid "Unable to create spool directory %1 for printer %2." -msgstr "Ii sáhte ráhkadit gárgadasozu %1 %2 čálána várás." +#: kprintdialog.cpp:293 +msgid "Set as &Default" +msgstr "&Geavat standárdan" -#: lpd/kmlpdmanager.cpp:165 -msgid "Unable to save information for printer %1." -msgstr "Ii sáhte vurket dieđuid %1-čálána várás." +#: kprintdialog.cpp:300 +#, fuzzy +msgid "Toggle selective view on printer list" +msgstr "Ii sáhte viežžat čálánlisttu." -#: lpd/kmlpdmanager.cpp:193 -msgid "" -"Unable to set correct permissions on spool directory %1 for printer %2." -msgstr "" -"Ii sáhte bidjat rievttes beassanvuoigatvuođaid %1-gárgadasohcui %2" -"-čálána várás." +#: kprintdialog.cpp:305 +msgid "Add printer..." +msgstr "Lasit čálána …" -#: lpd/kmlpdmanager.cpp:237 -msgid "Permission denied: you must be root." -msgstr "It beasa. Don fertet leat geavaheaddji «root»." +#: cups/ippreportdlg.cpp:34 cups/ippreportdlg.cpp:41 kprintdialog.cpp:307 +msgid "&Print" +msgstr "Čá&lit" -#: lpd/kmlpdmanager.cpp:244 -msgid "Unable to execute command \"%1\"." -msgstr "Ii sáhte vuodjit gohččuma «%1»." +#: kprintdialog.cpp:313 +msgid "Previe&w" +msgstr "O&vdačájeheapmi" -#: lpd/kmlpdmanager.cpp:317 -msgid "Unable to write printcap file." -msgstr "Ii sáhte čállit printcap-fiilii." +#: kprintdialog.cpp:315 +msgid "O&utput file:" +msgstr "O&lggosfiila:" -#: lpd/kmlpdmanager.cpp:372 -msgid "Couldn't find driver %1 in printtool database." -msgstr "Ii gávdnan %1 stivrrana printtool-diehtovuođus." +#: kprintdialog.cpp:321 +msgid "Print co&mmand:" +msgstr "Čál&ihangohččun:" -#: lpd/kmlpdmanager.cpp:411 -msgid "Couldn't find printer %1 in printcap file." -msgstr "Ii gávdnan %1-čálána printcap-fiillas." +#: kprintdialog.cpp:330 +msgid "Show/hide advanced options" +msgstr "Čájet/čiega erenoamáš molssaeavttuid" -#: lpd/kmlpdmanager.cpp:440 -msgid "No driver found (raw printer)" -msgstr "Ii gávdnan stivrrana (oktageardánis čálán)" +#: kprintdialog.cpp:332 +msgid "&Keep this dialog open after printing" +msgstr "&Doalat dán láseža rabas maŋŋá čáliheami" -#: lpd/kmlpdmanager.cpp:442 -msgid "Printer type not recognized." -msgstr "Amas čálánšládja." +#: kprintdialog.cpp:551 kprintdialog.cpp:939 +msgid "An error occurred while retrieving the printer list:" +msgstr "Filtii vieččadettiin čálánlisttu:" -#: lpd/kmlpdmanager.cpp:452 -msgid "" -"The driver device %1 is not compiled in your GhostScript distribution. " -"Check your installation or use another driver." -msgstr "" -"Čálánovttadat %1 ii leat kompilerejuvvon sisa GhostScript prográmmii. " -"Dárkkis sajáiduhttima dahje geavat eará stivrrana." +#: kprintdialog.cpp:715 +msgid "The output filename is empty." +msgstr "Olggosfiilanamma lea guorus." -#: lpd/kmlpdmanager.cpp:560 -msgid "Unable to write driver associated files in spool directory." -msgstr "Ii sáhte čállit stivrrančatnojuvvon fiillaid gárgadasohcui." +#: kprintdialog.cpp:754 +msgid "You don't have write permissions to this file." +msgstr "Dus eai leat čállinvuoigatvuođat dán fiilii. " -#: lpr/apshandler.cpp:68 -msgid "APS Driver (%1)" -msgstr "APS-stivrran (%1)" +#: kprintdialog.cpp:760 +msgid "The output directory does not exist." +msgstr "Olggosdáhtaohcu ii gávdno." -#: lpr/apshandler.cpp:112 lpr/lprhandler.cpp:74 lpr/lprngtoolhandler.cpp:72 -msgid "Network printer (%1)" -msgstr "Fierpmádatčálán (%1)" +#: kprintdialog.cpp:762 +msgid "You don't have write permissions in that directory." +msgstr "Dus eai leat čállinvuoigatvuođat dien ozus." -#: lpr/apshandler.cpp:215 lpr/lprhandler.cpp:127 lpr/lprngtoolhandler.cpp:276 -#: lpr/matichandler.cpp:421 -#, c-format -msgid "Unsupported backend: %1." -msgstr "Lakta ii dorjojuvvo: %1." +#: kprintdialog.cpp:874 +msgid "&Options <<" +msgstr "&Molssaeavttut <<" -#: lpr/apshandler.cpp:221 -#, c-format -msgid "Unable to create directory %1." -msgstr "Ii sáhte ráhkadit ozu %1:" +#: kprintdialog.cpp:887 +msgid "&Options >>" +msgstr "&Molssaeavttut >>" -#: lpr/apshandler.cpp:241 -#, c-format -msgid "Missing element: %1." -msgstr "Mearkkuš váilu: %1." +#: kprintdialog.cpp:929 +msgid "Initializing printing system..." +msgstr "Válbmemin čálihanvuogádaga …" -#: lpr/apshandler.cpp:258 lpr/apshandler.cpp:289 lpr/lprngtoolhandler.cpp:323 -#, c-format -msgid "Invalid printer backend specification: %1" -msgstr "Gustuhis čálánlakta merošteapmi: %1" +#: kprintdialog.cpp:965 +msgid "Print to File" +msgstr "Čálit fiilii" -#: lpr/apshandler.cpp:264 lpr/apshandler.cpp:295 lpr/apshandler.cpp:367 -#, c-format -msgid "Unable to create the file %1." -msgstr "Ii sáhte ráhkadit fiila %1." +#: kmprinter.cpp:197 kprintdialog.cpp:983 +msgid "All Files" +msgstr "Buot fiillat" -#: lpr/apshandler.cpp:322 -msgid "The APS driver is not defined." -msgstr "APS-stivrran ii leat meroštuvvon." +#: kprintprocess.cpp:75 +msgid "File transfer failed." +msgstr "Fiilasirdin filtii." -#: lpr/apshandler.cpp:380 -#, c-format -msgid "Unable to remove directory %1." -msgstr "Ii sáhte váldit ozu %1 eret." +#: kprintprocess.cpp:81 +msgid "Abnormal process termination (%1)." +msgstr "" -#: lpr/lprhandler.cpp:59 lpr/lprhandler.cpp:97 -msgid "Unknown (unrecognized entry)" -msgstr "Amas (amas mearkkuš)" +#: kprintprocess.cpp:83 +msgid "%1: execution failed with message:

%2

" +msgstr "" -#: lpr/lprhandler.cpp:67 lpr/lprhandler.cpp:91 -msgid "Remote queue (%1) on %2" -msgstr "Gáiddus gárgadus (%1) dáppe %2" +#: lpr/kmlprjobmanager.cpp:83 +msgid "Unsupported operation." +msgstr "Doarjjakeahtes bargu." -#: lpr/lprhandler.cpp:81 lpr/matichandler.cpp:86 -#, c-format -msgid "Local printer on %1" -msgstr "Báikkáláš čálán dáppe %1" +#: lpr/kmconfiglpr.cpp:33 lpr/kmconfiglpr.cpp:37 +msgid "Spooler" +msgstr "Gárgadas" -#: lpr/lprhandler.cpp:104 lpr/lprhandler.cpp:110 lpr/lprhandler.cpp:116 -msgid "Unrecognized entry." -msgstr "Amas mearkkuš" +#: lpr/kmconfiglpr.cpp:34 +msgid "Spooler Settings" +msgstr "Gárgadasheivehusat" #: lpr/kmlprmanager.cpp:289 msgid "The printcap file is a remote file (NIS). It cannot be written." @@ -355,67 +459,20 @@ msgstr "" msgid "Spooler type: %1" msgstr "Gárgadasšládja: %1" -#: lpr/kmlprjobmanager.cpp:83 -msgid "Unsupported operation." -msgstr "Doarjjakeahtes bargu." - -#: lpr/kmconfiglpr.cpp:33 lpr/kmconfiglpr.cpp:37 -msgid "Spooler" -msgstr "Gárgadas" - -#: lpr/kmconfiglpr.cpp:34 -msgid "Spooler Settings" -msgstr "Gárgadasheivehusat" - -#: lpr/lpchelper.cpp:235 lpr/lpchelper.cpp:273 lpr/lpchelper.cpp:291 -#: lpr/lpchelper.cpp:314 -msgid "The executable %1 couldn't be found in your PATH." -msgstr "Prográmmafiila %1 ii gávdnon du ohcanbálgás." - -#: lpr/lpchelper.cpp:256 lpr/lpchelper.cpp:280 lpr/lpchelper.cpp:298 -msgid "Permission denied." -msgstr "It beasa" - -#: lpr/lpchelper.cpp:259 -msgid "Printer %1 does not exist." -msgstr "Čálán %1 ii gávdno." - -#: lpr/lpchelper.cpp:263 -#, c-format -msgid "Unknown error: %1" -msgstr "Amas meattáhus: %1" - -#: lpr/lpchelper.cpp:282 -#, c-format -msgid "Execution of lprm failed: %1" -msgstr "Filtii vuodjit lprm: %1" - -#: lpr/lprngtoolhandler.cpp:99 -msgid "IFHP Driver (%1)" -msgstr "IFHP-stivrran (%1)" - -#: lpr/lprngtoolhandler.cpp:99 lpr/lprngtoolhandler.cpp:170 -msgid "unknown" -msgstr "amas" - -#: lpr/lprngtoolhandler.cpp:162 -msgid "No driver defined for that printer. It might be a raw printer." -msgstr "" -"Ii leat stivrran meroštuvvon dien čálánii. Dáidá leat oktageardánis čálán." - -#: lpr/lprngtoolhandler.cpp:170 -msgid "LPRngTool Common Driver (%1)" -msgstr "Oktasašstivrran «LPRngTool» (%1)" - #: lpr/matichandler.cpp:82 msgid "Network printer" msgstr "Fierpmádatčálán" +#: lpr/lprhandler.cpp:81 lpr/matichandler.cpp:86 +#, c-format +msgid "Local printer on %1" +msgstr "Báikkáláš čálán dáppe %1" + #: lpr/matichandler.cpp:245 msgid "Internal error." msgstr "Siskkildas meattáhus." -#: cups/kmcupsmanager.cpp:583 lpr/matichandler.cpp:254 +#: cups/kmcupsmanager.cpp:634 lpr/matichandler.cpp:254 #: lpr/matichandler.cpp:358 msgid "" "Unable to find the executable foomatic-datafile in your PATH. Check that " @@ -424,7 +481,7 @@ msgstr "" "Ii gávnna prográmmafiilla «foomatic-datafile» du ohcanbálgás (PATH). Dárkkis " "ahte foomatic lea rievttesláhkái sajáiduhttojuvvon." -#: cups/kmcupsmanager.cpp:615 lpr/matichandler.cpp:286 +#: cups/kmcupsmanager.cpp:666 lpr/matichandler.cpp:286 #: lpr/matichandler.cpp:405 msgid "" "Unable to create the Foomatic driver [%1,%2]. Either that driver does not " @@ -438,6 +495,12 @@ msgid "" "You probably don't have the required permissions to perform that operation." msgstr "Árvideames dus eai leat vuoigatvuođat barggu čađahit." +#: lpr/apshandler.cpp:215 lpr/lprhandler.cpp:127 lpr/lprngtoolhandler.cpp:276 +#: lpr/matichandler.cpp:421 +#, c-format +msgid "Unsupported backend: %1." +msgstr "Lakta ii dorjojuvvo: %1." + #: lpr/matichandler.cpp:426 msgid "" "Unable to find executable lpdomatic. Check that Foomatic is correctly installed " @@ -463,544 +526,543 @@ msgstr "Teaksta" msgid "Number" msgstr "Lohku" -#: lpr/editentrydialog.cpp:48 management/kxmlcommanddlg.cpp:111 -msgid "Boolean" -msgstr "Boolalaš" +#: lpr/editentrydialog.cpp:48 management/kxmlcommanddlg.cpp:111 +msgid "Boolean" +msgstr "Boolalaš" + +#: kpgeneralpage.cpp:417 lpd/lpdtools.cpp:39 lpr/editentrydialog.cpp:50 +msgid "Enabled" +msgstr "Alde" + +#: lpr/editentrydialog.cpp:72 +#, c-format +msgid "Printcap Entry: %1" +msgstr "Printcap-mearkkuš: %1" + +#: lpr/lprhandler.cpp:59 lpr/lprhandler.cpp:97 +msgid "Unknown (unrecognized entry)" +msgstr "Amas (amas mearkkuš)" + +#: lpr/lprhandler.cpp:67 lpr/lprhandler.cpp:91 +msgid "Remote queue (%1) on %2" +msgstr "Gáiddus gárgadus (%1) dáppe %2" + +#: lpr/apshandler.cpp:112 lpr/lprhandler.cpp:74 lpr/lprngtoolhandler.cpp:72 +msgid "Network printer (%1)" +msgstr "Fierpmádatčálán (%1)" + +#: lpr/lprhandler.cpp:104 lpr/lprhandler.cpp:110 lpr/lprhandler.cpp:116 +msgid "Unrecognized entry." +msgstr "Amas mearkkuš" + +#: lpr/lprngtoolhandler.cpp:99 +msgid "IFHP Driver (%1)" +msgstr "IFHP-stivrran (%1)" + +#: lpr/lprngtoolhandler.cpp:99 lpr/lprngtoolhandler.cpp:170 +msgid "unknown" +msgstr "amas" + +#: lpr/lprngtoolhandler.cpp:162 +msgid "No driver defined for that printer. It might be a raw printer." +msgstr "" +"Ii leat stivrran meroštuvvon dien čálánii. Dáidá leat oktageardánis čálán." + +#: lpr/lprngtoolhandler.cpp:170 +msgid "LPRngTool Common Driver (%1)" +msgstr "Oktasašstivrran «LPRngTool» (%1)" + +#: lpr/apshandler.cpp:258 lpr/apshandler.cpp:289 lpr/lprngtoolhandler.cpp:323 +#, c-format +msgid "Invalid printer backend specification: %1" +msgstr "Gustuhis čálánlakta merošteapmi: %1" + +#: lpr/lpchelper.cpp:235 lpr/lpchelper.cpp:273 lpr/lpchelper.cpp:291 +#: lpr/lpchelper.cpp:314 +msgid "The executable %1 couldn't be found in your PATH." +msgstr "Prográmmafiila %1 ii gávdnon du ohcanbálgás." + +#: lpr/lpchelper.cpp:256 lpr/lpchelper.cpp:280 lpr/lpchelper.cpp:298 +msgid "Permission denied." +msgstr "It beasa" + +#: lpr/lpchelper.cpp:259 +msgid "Printer %1 does not exist." +msgstr "Čálán %1 ii gávdno." + +#: lpr/lpchelper.cpp:263 +#, c-format +msgid "Unknown error: %1" +msgstr "Amas meattáhus: %1" + +#: lpr/lpchelper.cpp:282 +#, c-format +msgid "Execution of lprm failed: %1" +msgstr "Filtii vuodjit lprm: %1" + +#: lpr/apshandler.cpp:68 +msgid "APS Driver (%1)" +msgstr "APS-stivrran (%1)" + +#: lpr/apshandler.cpp:221 +#, c-format +msgid "Unable to create directory %1." +msgstr "Ii sáhte ráhkadit ozu %1:" -#: lpr/editentrydialog.cpp:72 +#: lpr/apshandler.cpp:241 #, c-format -msgid "Printcap Entry: %1" -msgstr "Printcap-mearkkuš: %1" +msgid "Missing element: %1." +msgstr "Mearkkuš váilu: %1." -#: kprintdialog.cpp:97 -#, fuzzy -msgid "" -" Printer Location: The Location may describe where the " -"selected printer is located. The Location description is created by the " -"administrator of the print system (or may be left empty). " -msgstr "" -"Čujuhus sáhttá muitalit gos válljejuvvon čálán lea. " -"Vuogádathálddašeaddji ráhkada čálihanvuogádaga báike-válddahusa (dahje guođđá " -"dan guorusin)." +#: lpr/apshandler.cpp:264 lpr/apshandler.cpp:295 lpr/apshandler.cpp:367 +#, c-format +msgid "Unable to create the file %1." +msgstr "Ii sáhte ráhkadit fiila %1." -#: kprintdialog.cpp:102 -#, fuzzy -msgid "" -" Printer Type: The Type indicates your printer type. " -msgstr "Šládja lea čálánšládja." +#: lpr/apshandler.cpp:322 +msgid "The APS driver is not defined." +msgstr "APS-stivrran ii leat meroštuvvon." -#: kprintdialog.cpp:104 -#, fuzzy -msgid "" -" Printer State: The State indicates the state of the print " -"queue on the print server (which could be your localhost). The state may be " -"'Idle', 'Processing', 'Stopped', 'Paused' or similar. " -msgstr "" -"Dilli muitala čálihangárgadusa dili čálihanbálvás (mii sáhttá leat " -"du báikkálaš mašiinnas). Dille sáhttá leat «Ealjoheapme», «Vuodjimin», " -"«Bissehuvvon», «Boddu» dahje juoga nu." +#: lpr/apshandler.cpp:380 +#, c-format +msgid "Unable to remove directory %1." +msgstr "Ii sáhte váldit ozu %1 eret." -#: kprintdialog.cpp:108 +#: kpdriverpage.cpp:30 management/kmpropdriver.cpp:54 +msgid "Driver Settings" +msgstr "Stivrranheivehusat" + +#: kpdriverpage.cpp:48 #, fuzzy msgid "" -" Printer Comment: The Comment may describe the selected " -"printer. This comment is created by the administrator of the print system (or " -"may be left empty). " +"Some options selected are in conflict. You must resolve these conflicts " +"before continuing. See Driver Settings tab for detailed information." msgstr "" -"Kommeanta sáhttá muitalit válljejuvvon čálána birra. " -"Vuogádathálddašeaddji ráhkada kommeantta (dahje guođđá dan guorusin)." +"Muhton molssaeavttut eai heive oktii. Fertet čoavdit dán ovdalgo joatkkát. " +"Geahčča Erenoamáš vai oažžut bienálaš dieđuid." -#: kprintdialog.cpp:112 +#: posterpreview.cpp:115 #, fuzzy msgid "" -" Printer Selection Menu: " -"

Use this combo box to select the printer to which you want to print. " -"Initially (if you run TDEPrint for the first time), you may only find the " -"TDE special printers (which save jobs to disk [as PostScript- or " -"PDF-files], or deliver jobs via email (as a PDF attachment). If you are missing " -"a real printer, you need to... " -"

    " -"
  • ...either create a local printer with the help of the " -"TDE Add Printer Wizard. The Wizard is available for the CUPS and RLPR " -"printing systems (click button to the left of the 'Properties' " -"button),
    • " -"
  • ...or try to connect to an existing remote CUPS print server. You can " -"connect by clicking the 'System Options' button below. A new dialog " -"opens: click on the 'CUPS server' icon: Fill in the information " -"required to use the remote server.
" -"

Note: It may happen that you successfully connected to a remote CUPS " -"server and still do not get a printer list. If this happens: force TDEPrint to " -"re-load its configuration files. To reload the configuration files, either " -"start kprinter again, or use the switch the print system away from CUPS and " -"back again once. The print system switch can be made through a selection in " -"the drop-down menu at bottom of this dialog when fully expanded).

" +"Poster preview not available. Either the poster " +"executable is not properly installed, or you don't have the required version" msgstr "" -" Dán lotnolasbovssas válljet guđe čálániin čálihat. Jus gávnnat dušše " -"TDE erenoamáščálániid – mat vurkejit bargguid skearrui (PostScript- dahje " -"PDF-fiilan), dahje sáddejit bargguid e-boastta bokte (PDF-mielddusin) – muhto " -"váilot albma čálána, de fertet …" +"Ii sáhte čájehit plakáhta ovdagihtii. Sáhttá leat ahte poster " +"prográmma ii leat sajáiduhttojuvvon dahje lea boastu veršuvnnas." -#: kprintdialog.cpp:137 -msgid "" -" Print Job Properties: " -"

This button opens a dialog where you can make decisions regarding all " -"supported print job options. " -msgstr "" +#: cups/kptextpage.cpp:195 kpmarginpage.cpp:42 kpmarginpage.cpp:45 +msgid "Margins" +msgstr "Siidorávddat" -#: kprintdialog.cpp:141 -msgid "" -" Selective View on List of Printers: " -"

This button reduces the list of visible printers to a shorter, more " -"convenient, pre-defined list.

" -"

This is particularly useful in enterprise environments with lots of " -"printers. The default is to show all printers.

" -"

To create a personal 'selective view list', click on the " -"'System Options' button at the bottom of this dialog. Then, in the new " -"dialog, select 'Filter' (left column in the " -"TDE Print Configuration dialog) and setup your selection..

" -"

Warning: Clicking this button without prior creation of a personal " -"'selective view list' will make all printers dissappear from the " -"view. (To re-enable all printers, just click this button again.)

" -msgstr "" +#: cups/kmpropusers.cpp:38 cups/kmwusers.cpp:39 +msgid "Users" +msgstr "Geavaheaddjit" -#: kprintdialog.cpp:154 -msgid "" -"TDE Add Printer Wizard " -"

This button starts the TDE Add Printer Wizard.

" -"

Use the Wizard (with \"CUPS\" or \"RLPR\"" -") to add locally defined printers to your system.

" -"

Note: The TDE Add Printer Wizard does not " -"work, and this button is disabled if you use \"Generic LPD\", " -"\"LPRng\", or \"Print Through an External Program\".)

" +#: cups/kmpropusers.cpp:39 cups/kmwusers.cpp:36 +msgid "Users Access Settings" msgstr "" -#: kprintdialog.cpp:163 -msgid "" -" External Print Command " -"

Here you can enter any command that would also print for you in a " -"konsole window.

Example: " -"
a2ps -P <printername> --medium=A3
. " +#: cups/kmpropusers.cpp:55 +msgid "Denied users" msgstr "" -#: kprintdialog.cpp:168 -#, fuzzy -msgid "" -" Additional Print Job Options " -"

This button shows or hides additional printing options." -msgstr " Dát boallu čájeha dahje čiehká lasi čálihanmolssaeavttuid." - -#: kprintdialog.cpp:170 -msgid "" -" System Options: " -"

This button starts a new dialog where you can adjust various settings of " -"your printing system. Amongst them: " -"

    " -"
  • Should TDE applications embed all fonts into the PostScript they generate " -"for printing? " -"
  • Should TDE use an external PostScript viewer like gv " -"for print page previews? " -"
  • Should TDEPrint use a local or a remote CUPS server?,
" -"and many more.... " +#: cups/kmpropusers.cpp:62 +msgid "Allowed users" msgstr "" -#: kprintdialog.cpp:182 -#, fuzzy -msgid "" -" Help: This button takes you to the complete TDEPrint Manual" -". " -msgstr " Dát boallu doalvu du TDEPrint-giehtagirjái." - -#: kprintdialog.cpp:186 -#, fuzzy -msgid "" -" Cancel: This button cancels your print job and quits the kprinter " -"dialog. " +#: cups/kmpropusers.cpp:76 +msgid "All users allowed" msgstr "" -" Dát boallu gaskkalduhttá du čálihanbargguid ja heaittiha " -"kprinter-láseža." -#: kprintdialog.cpp:190 -#, fuzzy +#: cups/kptextpage.cpp:41 msgid "" -" Print: This button sends the job to the printing process. If you " -"are sending non-PostScript files, you may be asked if you want TDE to convert " -"the files into PostScript, or if you want your print subsystem (like CUPS) to " -"do this. " +" " +"

Characters Per Inch

" +"

This setting controls the horizontal size of characters when printing a text " +"file.

" +"

The default value is 10, meaning that the font is scaled in a way that 10 " +"characters per inch will be printed.

" +"
" +"

Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"

    -o cpi=...          # example: \"8\" or \"12\"

" msgstr "" -" Dát boallu sádde barggu čálihanprosessii. Jos sáddet " -"eai-PostScrpt-fiillaid, de fertet veardidit jos TDE galgá jorgalit fiilla " -"PostScript:ii dahje jos čálihanvuogádat (nugo CUPS) galgá dan bargat." -#: kprintdialog.cpp:196 +#: cups/kptextpage.cpp:55 msgid "" -" Keep Printing Dialog Open" -"

If you enable this checkbox, the printing dialog stays open after you hit " -"the Print button.

" -"

This is especially useful, if you need to test various print settings (like " -"color matching for an inkjet printer) or if you want to send your job to " -"multiple printers (one after the other) to have it finished more quickly.

" -"" +" " +"

Lines Per Inch

" +"

This setting controls the vertical size of characters when printing a text " +"file.

" +"

The default value is 6, meaning that the font is scaled in a way that 6 " +"lines per inch will be printed.

" +"
" +"

Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"

    -o lpi=...         # example \"5\" or \"7\"

" msgstr "" -#: kprintdialog.cpp:206 +#: cups/kptextpage.cpp:69 msgid "" -" Output File Name and Path: The \"Output file:\" shows you where " -"your file will be saved if you decide to \"Print to File\" your job, using one " -"of the TDE Special Printers named \"Print to File (PostScript)\" or " -"\"Print to File (PDF)\". Choose a name and location that suits your need by " -"using the button and/or editing the line on the right. " +" " +"

Columns

" +"

This setting controls how many columns of text will be printed on each page " +"when. printing text files.

" +"

The default value is 1, meaning that only one column of text per page will " +"be printed.

" +"
" +"

Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"

    -o columns=...     # example: \"2\" or \"4\"

" msgstr "" -#: kprintdialog.cpp:214 -msgid "" -" Output File Name and Path: Edit this line to create a path and " -"filename that suits your needs. (Button and Lineedit field are only available " -"if you \"Print to File\") " +#: cups/kptextpage.cpp:84 +msgid " Preview icon changes when you turn on or off prettyprint. " msgstr "" -#: kprintdialog.cpp:219 +#: cups/kptextpage.cpp:87 msgid "" -" Browse Directories button: This button calls the \"File Open / " -"Browsed Directories\" dialog to let you choose a directory and file name where " -"your \"Print-to-File\" job should be saved. " +" " +"

Text Formats

" +"

These settings control the appearance of text on printouts. They are only " +"valid for printing text files or input directly through kprinter.

" +"

Note: These settings have no effect whatsoever for other input " +"formats than text, or for printing from applications such as the KDE Advanced " +"Text Editor. (Applications in general send PostScript to the print system, and " +"'kate' in particular has its own knobs to control the print output.

. " +"
" +"

Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"

     -o cpi=...         # example: \"8\" or \"12\"  "
+"
     -o lpi=...         # example: \"5\" or \"7\"  "
+"
     -o columns=...     # example: \"2\" or \"4\"

" msgstr "" -#: kprintdialog.cpp:225 +#: cups/kptextpage.cpp:108 msgid "" -" Add File to Job " -"

This button calls the \"File Open / Browse Directories\" dialog to allow you " -"to select a file for printing. Note, that " -"

    " -"
  • you can select ASCII or International Text, PDF, PostScript, JPEG, TIFF, " -"PNG, GIF and many other graphical formats. " -"
  • you can select various files from different paths and send them as one " -"\"multi-file job\" to the printing system.
" +" " +"

Margins

" +"

These settings control the margins of printouts on the paper. They are not " +"valid for jobs originating from applications which define their own page " +"layout internally and send PostScript to TDEPrint (such as KOffice or " +"OpenOffice.org).

" +"

When printing from KDE applications, such as KMail and Konqueror, or " +"printing an ASCII text file through kprinter, you can choose your preferred " +"margin settings here.

" +"

Margins may be set individually for each edge of the paper. The combo box at " +"the bottom lets you change the units of measurement between Pixels, " +"Millimeters, Centimeters, and Inches.

" +"

You can even use the mouse to grab one margin and drag it to the intended " +"position (see the preview picture on the right side).

" +"
" +"

Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"

     -o page-top=...      # example: \"72\"  "
+"
     -o page-bottom=...   # example: \"24\"  "
+"
     -o page-left=...     # example: \"36\"  "
+"
     -o page-right=...    # example: \"12\"

" msgstr "" -#: kprintdialog.cpp:237 +#: cups/kptextpage.cpp:134 msgid "" -" Print Preview Enable this checkbox if you want to see a preview of " -"your printout. A preview lets you check if, for instance, your intended " -"\"poster\" or \"pamphlet\" layout looks like you expected, without wasting " -"paper first. It also lets you cancel the job if something looks wrong. " -"

Note: The preview feature (and therefore this checkbox) is only " -"visible for printjobs created from inside TDE applications. If you start " -"kprinter from the commandline, or if you use kprinter as a print command for " -"non-TDE applications (like Acrobat Reader, Firefox or OpenOffice), print " -"preview is not available here. " +" " +"

Turn Text Printing with Syntax Highlighting (Prettyprint) On!

" +"

ASCII text file printouts can be 'prettyfied' by enabling this option. If " +"you do so, a header is printed at the top of each page. The header contains " +"the page number, job title (usually the filename), and the date. In addition, C " +"and C++ keywords are highlighted, and comment lines are italicized.

" +"

This prettyprint option is handled by CUPS.

" +"

If you prefer another 'plaintext-to-prettyprint' converter, look for the " +"enscript pre-filter on the Filters tab.

" +"
" +"
" +"

Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"

     -o prettyprint=true.

" msgstr "" -#: kprintdialog.cpp:250 +#: cups/kptextpage.cpp:153 msgid "" -" Set as Default Printer This button sets the current printer as the " -"user's default. " -"

Note: (Button is only visible if the checkbox for " -"System Options --> General --> Miscellaneous: " -"\"Defaults to the last printer used in the application\" " -"is disabled.) " +" " +"

Turn Text Printing with Syntax Highlighting (Prettyprint) Off!

" +"

ASCII text file printing with this option turned off are appearing without a " +"page header and without syntax highlighting. (You can still set the page " +"margins, though.)

" +"
" +"
" +"

Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"

    -o prettyprint=false

" msgstr "" -#: kprintdialog.cpp:265 management/kmmainview.cpp:290 management/kmwend.cpp:90 -#: management/smbview.cpp:43 -msgid "Printer" -msgstr "Čálán" - -#: kprintdialog.cpp:278 management/kmspecialprinterdlg.cpp:56 -#: management/kxmlcommanddlg.cpp:114 -msgid "&Name:" -msgstr "&Namma:" - -#: kprintdialog.cpp:280 management/kminfopage.cpp:50 +#: cups/kptextpage.cpp:167 msgid "" -"_: Status\n" -"State:" -msgstr "Dilli:" - -#: kprintdialog.cpp:282 management/kminfopage.cpp:48 -msgid "Type:" -msgstr "Šládja:" - -#: kprintdialog.cpp:284 management/kmwname.cpp:40 -msgid "Location:" -msgstr "Čujuhus:" - -#: kprintdialog.cpp:286 management/kxmlcommanddlg.cpp:176 -msgid "Comment:" -msgstr "Kommeanta:" - -#: kprintdialog.cpp:289 -msgid "P&roperties" -msgstr "&Iesvuođat …" - -#: kprintdialog.cpp:291 -msgid "System Op&tions" -msgstr "&Vuogádatmolssaeavttut" - -#: kprintdialog.cpp:293 -msgid "Set as &Default" -msgstr "&Geavat standárdan" - -#: kprintdialog.cpp:300 -#, fuzzy -msgid "Toggle selective view on printer list" -msgstr "Ii sáhte viežžat čálánlisttu." - -#: kprintdialog.cpp:305 -msgid "Add printer..." -msgstr "Lasit čálána …" - -#: cups/ippreportdlg.cpp:34 cups/ippreportdlg.cpp:41 kprintdialog.cpp:307 -msgid "&Print" -msgstr "Čá&lit" - -#: kprintdialog.cpp:313 -msgid "Previe&w" -msgstr "O&vdačájeheapmi" - -#: kprintdialog.cpp:315 -msgid "O&utput file:" -msgstr "O&lggosfiila:" - -#: kprintdialog.cpp:321 -msgid "Print co&mmand:" -msgstr "Čál&ihangohččun:" - -#: kprintdialog.cpp:330 -msgid "Show/hide advanced options" -msgstr "Čájet/čiega erenoamáš molssaeavttuid" - -#: kprintdialog.cpp:332 -msgid "&Keep this dialog open after printing" -msgstr "&Doalat dán láseža rabas maŋŋá čáliheami" - -#: kprintdialog.cpp:551 kprintdialog.cpp:939 -msgid "An error occurred while retrieving the printer list:" -msgstr "Filtii vieččadettiin čálánlisttu:" +" " +"

Print Text with Syntax Highlighting (Prettyprint)

" +"

ASCII file printouts can be 'prettyfied' by enabling this option. If you do " +"so, a header is printed at the top of each page. The header contains the page " +"number, job title (usually the filename), and the date. In addition, C and C++ " +"keywords are highlighted, and comment lines are italicized.

" +"

This prettyprint option is handled by CUPS.

" +"

If you prefer another 'plaintext-to-prettyprint' converter, look for the " +"enscript pre-filter on the Filters tab.

" +"
" +"
" +"

Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"

     -o prettyprint=true.  "
+"
     -o prettyprint=false

" +msgstr "" -#: kprintdialog.cpp:715 -msgid "The output filename is empty." -msgstr "Olggosfiilanamma lea guorus." +#: cups/kptextpage.cpp:188 +msgid "Text" +msgstr "Teaksta" -#: kprintdialog.cpp:754 -msgid "You don't have write permissions to this file." -msgstr "Dus eai leat čállinvuoigatvuođat dán fiilii. " +#: cups/kptextpage.cpp:191 +msgid "Text Format" +msgstr "Teakstaformáhtta" -#: kprintdialog.cpp:760 -msgid "The output directory does not exist." -msgstr "Olggosdáhtaohcu ii gávdno." +#: cups/kptextpage.cpp:193 +msgid "Syntax Highlighting" +msgstr "Syntáksamerken" -#: kprintdialog.cpp:762 -msgid "You don't have write permissions in that directory." -msgstr "Dus eai leat čállinvuoigatvuođat dien ozus." +#: cups/kptextpage.cpp:200 +msgid "&Chars per inch:" +msgstr "" -#: kprintdialog.cpp:874 -msgid "&Options <<" -msgstr "&Molssaeavttut <<" +#: cups/kptextpage.cpp:204 +msgid "&Lines per inch:" +msgstr "" -#: kprintdialog.cpp:887 -msgid "&Options >>" -msgstr "&Molssaeavttut >>" +#: cups/kptextpage.cpp:208 +msgid "C&olumns:" +msgstr "Čuol&ddat:" -#: kprintdialog.cpp:929 -msgid "Initializing printing system..." -msgstr "Válbmemin čálihanvuogádaga …" +#: cups/kptextpage.cpp:216 +msgid "&Disabled" +msgstr "&Eret" -#: kprintdialog.cpp:965 -msgid "Print to File" -msgstr "Čálit fiilii" +#: cups/kptextpage.cpp:218 +msgid "&Enabled" +msgstr "&Alde" -#: kmprinter.cpp:197 kprintdialog.cpp:983 -msgid "All Files" -msgstr "Buot fiillat" +#: cups/kmconfigcups.cpp:32 +msgid "CUPS Server" +msgstr "CUPS-bálvá" -#: cups/kpschedulepage.cpp:40 -msgid "" -" " -"

Print Job Billing and Accounting

" -"

Insert a meaningful string here to associate the current print job with a " -"certain account. This string will appear in the CUPS \"page_log\" to help with " -"the print accounting in your organization. (Leave it empty if you do not need " -"it.) " -"

It is useful for people who print on behalf of different \"customers\", " -"like print service bureaux, letter shops, press and prepress companies, or " -"secretaries who serve different bosses, etc.

" -"
" -"
" -"

Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"

    -o job-billing=...         # example: \"Marketing_Department\" or "
-"\"Joe_Doe\"

" -msgstr "" +#: cups/kmconfigcups.cpp:33 +msgid "CUPS Server Settings" +msgstr "CUPS-bálvá heivehusat" -#: cups/kpschedulepage.cpp:60 -msgid "" -" " -"

Scheduled Printing

" -"

Scheduled printing lets you control the time of the actual printout, while " -"you can still send away your job now and have it out of your way. " -"

Especially useful is the \"Never (hold indefinitely)\" option. It allows " -"you to park your job until a time when you (or a printer administrator) decides " -"to manually release it. " -"

This is often required in enterprise environments, where you normally are " -"not allowed to directly and immediately access the huge production printers in " -"your Central Repro Department. However it is okay to send jobs to the " -"queue which is under the control of the operators (who, after all, need to make " -"sure that the 10,000 sheets of pink paper which is required by the Marketing " -"Department for a particular job are available and loaded into the paper " -"trays).

" +#: cups/kphpgl2page.cpp:33 +msgid "" +" Print in Black Only (Blackplot) " +"

The 'blackplot' option specifies that all pens should plot in black-only: " +"The default is to use the colors defined in the plot file, or the standard pen " +"colors defined in the HP-GL/2 reference manual from Hewlett Packard.

" "
" "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " -"

    -o job-hold-until=...      # example: \"indefinite\" or \"no-hold\"  "
-"

" +"
    -o blackplot=true

" msgstr "" -#: cups/kpschedulepage.cpp:87 +#: cups/kphpgl2page.cpp:48 msgid "" -" " -"

Page Labels

" -"

Page Labels are printed by CUPS at the top and bottom of each page. They " -"appear on the pages surrounded by a little frame box. " -"

They contain any string you type into the line edit field.

" +" Scale Print Image to Page Size " +"

The 'fitplot' option specifies that the HP-GL image should be scaled to fill " +" exactly the page with the (elsewhere selected) media size.

" +"

The default is 'fitplot is disabled'. The default will therefore use the " +"absolute distances specified in the plot file. (You should be aware that HP-GL " +"files are very often CAD drawings intended for large format plotters. On " +"standard office printers they will therefore lead to the drawing printout " +"being spread across multiple pages.)

" +"

Note:This feature depends upon an accurate plot size (PS) command in " +"the HP-GL/2 file. If no plot size is given in the file the filter converting " +"the HP-GL to PostScript assumes the plot is ANSI E size.

" "
" "
" "

Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"

    -o page-label=\"...\"      # example: \"Company Confidential\"
" -"

" +"matches with the CUPS commandline job option parameter: " +"
     -o fitplot=true

" msgstr "" -#: cups/kpschedulepage.cpp:102 +#: cups/kphpgl2page.cpp:68 msgid "" -" " -"

Job Priority

" -"

Usually CUPS prints all jobs per queue according to the \"FIFO\" principle: " -"First In, First Out. " -"

The job priority option allows you to re-order the queue according to your " -"needs. " -"

It works in both directions: you can increase as well as decrease " -"priorities. (Usually you can only control your own jobs). " -"

Since the default job priority is \"50\", any job sent with, for example, " -"\"49\" will be printed only after all those others have finished. Conversely, a " -"\"51\" or higher priority job will go right to the top of a populated queue (if " -"no other, higher prioritized one is present).

" +" Set Pen Width for HP-GL (if not defined in file). " +"

The pen width value can be set here in case the original HP-GL file does not " +"have it set. The pen width specifies the value in micrometers. The default " +"value of 1000 produces lines that are 1000 micrometers == 1 millimeter in " +"width. Specifying a pen width of 0 produces lines that are exactly 1 pixel " +"wide.

" +"

Note: The penwidth option set here is ignored if the pen widths are " +"set inside the plot file itself..

" "
" "
" "

Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"

    -o job-priority=...   # example: \"10\" or \"66\" or \"99\"
" -"

" +"matches with the CUPS commandline job option parameter: " +"
    -o penwidth=...   # example: \"2000\" or \"500\"

" msgstr "" -#: cups/kpschedulepage.cpp:126 -msgid "Advanced Options" -msgstr "Erenoamáš molssaeavttut" +#: cups/kphpgl2page.cpp:85 +msgid "" +" HP-GL Print Options " +"

All options on this page are only applicable if you use TDEPrint to send " +"HP-GL and HP-GL/2 files to one of your printers.

" +"

HP-GL and HP-GL/2 are page description languages developed by " +"Hewlett-Packard to drive Pen Plotting devices.

" +"

TDEPrint can (with the help of CUPS) convert the HP-GL file format and print " +"it on any installed printer.

" +"

Note 1: To print HP-GL files, start 'kprinter' and simply load the " +"file into the running kprinter.

" +"

Note 2: The 'fitplot' parameter provided on this dialog does also " +"work for printing PDF files (if your CUPS version is more recent than " +"1.1.22).

" +"
" +"
" +"

Additional hint for power users: These TDEPrint GUI elements " +"match with CUPS commandline job option parameters: " +"

     -o blackplot=...  # examples: \"true\" or \"false\"  "
+"
     -o fitplot=...    # examples: \"true\" or \"false\"  "
+"
     -o penwidth=...   # examples: \"true\" or \"false\"

" +msgstr "" -#: cups/kpschedulepage.cpp:137 -msgid "Immediately" -msgstr "Dálánaga" +#: cups/kphpgl2page.cpp:113 +msgid "HP-GL/2 Options" +msgstr "HP-GL/2-molssaeavttut" -#: cups/kpschedulepage.cpp:138 -msgid "Never (hold indefinitely)" -msgstr "Ii goassige (vuordde vaikko man guhká)" +#: cups/kphpgl2page.cpp:115 +msgid "&Use only black pen" +msgstr "&Geavat dušše čáhpes peanna" -#: cups/kpschedulepage.cpp:139 -msgid "Daytime (6 am - 6 pm)" -msgstr "Beaivet (6-18)" +#: cups/kphpgl2page.cpp:118 +msgid "&Fit plot to page" +msgstr "" -#: cups/kpschedulepage.cpp:140 -msgid "Evening (6 pm - 6 am)" -msgstr "Eahkedis (18-6)" +#: cups/kphpgl2page.cpp:122 +msgid "&Pen width:" +msgstr "&Peannagovdodat:" -#: cups/kpschedulepage.cpp:141 -msgid "Night (6 pm - 6 am)" -msgstr "Ihku (18-6)" +#: cups/kmwippselect.cpp:38 +msgid "Remote IPP Printer Selection" +msgstr "" -#: cups/kpschedulepage.cpp:142 -msgid "Weekend" -msgstr "Vahkkoloahpaid" +#: cups/kmwippselect.cpp:51 +msgid "You must select a printer." +msgstr "Fertet válljet čálána." -#: cups/kpschedulepage.cpp:143 -msgid "Second Shift (4 pm - 12 am)" -msgstr "Eahketbargovuorru (16-24)" +#: cups/kmcupsuimanager.cpp:87 +msgid "" +"" +"

Print queue on remote CUPS server

" +"

Use this for a print queue installed on a remote machine running a CUPS " +"server. This allows to use remote printers when CUPS browsing is turned off.

" +"" +msgstr "" -#: cups/kpschedulepage.cpp:144 -msgid "Third Shift (12 am - 8 am)" -msgstr "Idjabargovuorru (0-8)" +#: cups/kmcupsuimanager.cpp:94 +msgid "" +"" +"

Network IPP printer

" +"

Use this for a network-enabled printer using the IPP protocol. Modern " +"high-end printers can use this mode. Use this mode instead of TCP if your " +"printer can do both.

" +msgstr "" -#: cups/kpschedulepage.cpp:145 -msgid "Specified Time" -msgstr "Meroštallon áigi" +#: cups/kmcupsuimanager.cpp:101 +msgid "" +"" +"

Fax/Modem printer

" +"

Use this for a fax/modem printer. This requires the installation of the fax4CUPS " +"backend. Documents sent on this printer will be faxed to the given target fax " +"number.

" +msgstr "" -#: cups/kpschedulepage.cpp:160 -#, fuzzy -msgid "&Scheduled printing:" -msgstr "&Pláne čáliheami:" +#: cups/kmcupsuimanager.cpp:108 +msgid "" +"" +"

Other printer

" +"

Use this for any printer type. To use this option, you must know the URI of " +"the printer you want to install. Refer to the CUPS documentation for more " +"information about the printer URI. This option is mainly useful for printer " +"types using 3rd party backends not covered by the other possibilities.

" +msgstr "" -#: cups/kpschedulepage.cpp:163 -msgid "&Billing information:" -msgstr "&Rehketdieđuid:" +#: cups/kmcupsuimanager.cpp:116 +msgid "" +"" +"

Class of printers

" +"

Use this to create a class of printers. When sending a document to a class, " +"the document is actually sent to the first available (idle) printer in the " +"class. Refer to the CUPS documentation for more information about class of " +"printers.

" +msgstr "" -#: cups/kpschedulepage.cpp:166 -msgid "T&op/Bottom page label:" -msgstr "Oa&ive-/juolgeteaksta:" +#: cups/kmcupsuimanager.cpp:129 +msgid "Re&mote CUPS server (IPP/HTTP)" +msgstr "Gá&iddus CUPS-bálvá (IPP/HTTP)" -#: cups/kpschedulepage.cpp:169 -msgid "&Job priority:" -msgstr "&Bargoovdavuorru:" +#: cups/kmcupsuimanager.cpp:130 +msgid "Network printer w/&IPP (IPP/HTTP)" +msgstr "Fierpmádatčálán mas lea I&PP (IPP/HTTP)" -#: cups/kpschedulepage.cpp:200 -msgid "The time specified is not valid." -msgstr "Addon áigi ii gusto." +#: cups/kmcupsuimanager.cpp:131 +msgid "S&erial Fax/Modem printer" +msgstr "&Maŋŋálas fáksa/modem-čálán" -#: cups/kmwbanners.cpp:57 -msgid "No Banner" -msgstr "Eai leavggat" +#: cups/kmcupsuimanager.cpp:132 +msgid "Other &printer type" +msgstr "Eará čálá&nšládja" -#: cups/kmwbanners.cpp:58 -msgid "Classified" -msgstr "Juogustuvvon" +#: cups/kmcupsuimanager.cpp:134 +msgid "Cl&ass of printers" +msgstr "Čálá&nluohkká" -#: cups/kmwbanners.cpp:59 -msgid "Confidential" -msgstr "Suollemas" +#: cups/kmcupsuimanager.cpp:190 +msgid "An error occurred while retrieving the list of available backends:" +msgstr "Filtii vieččadettiin vieččadettiin olamuttus duogáščoavdduslisttu:" -#: cups/kmwbanners.cpp:60 -msgid "Secret" -msgstr "Suollemas" +#: cups/kmcupsuimanager.cpp:236 +msgid "Priority" +msgstr "Ovdavuorru" -#: cups/kmwbanners.cpp:61 -msgid "Standard" -msgstr "Standárda" +#: cups/kmcupsuimanager.cpp:238 +msgid "Billing Information" +msgstr "Rehketdieđut" -#: cups/kmwbanners.cpp:62 -msgid "Top Secret" -msgstr "Hui suollemas" +#: cups/kmconfigcupsdir.cpp:34 +msgid "Folder" +msgstr "Máhppa" -#: cups/kmwbanners.cpp:63 -msgid "Unclassified" -msgstr "Ii juogustuvvon" +#: cups/kmconfigcupsdir.cpp:35 +msgid "CUPS Folder Settings" +msgstr "CUPS-máhpa heivehusat" -#: cups/kmwbanners.cpp:86 -msgid "Banner Selection" -msgstr "Vállje leavggaid" +#: cups/kmconfigcupsdir.cpp:38 +msgid "Installation Folder" +msgstr "Sajáiduhttinmáhppa" -#: cups/kmpropbanners.cpp:35 cups/kmwbanners.cpp:92 -msgid "&Starting banner:" -msgstr "Ál&goleavga:" +#: cups/kmconfigcupsdir.cpp:41 +msgid "Standard installation (/)" +msgstr "Standárdsajáiduhttin (/)" -#: cups/kmpropbanners.cpp:36 cups/kmwbanners.cpp:93 -msgid "&Ending banner:" -msgstr "Loa&hpaleavga:" +#: cups/kmwusers.cpp:41 +msgid "Allowed Users" +msgstr "" -#: cups/kmwbanners.cpp:99 -msgid "" -"

Select the default banners associated with this printer. These banners will " -"be inserted before and/or after each print job sent to the printer. If you " -"don't want to use banners, select No Banner.

" +#: cups/kmwusers.cpp:42 +msgid "Denied Users" +msgstr "" + +#: cups/kmwusers.cpp:44 +msgid "Define here a group of allowed/denied users for this printer." msgstr "" +#: cups/kmwusers.cpp:45 management/kxmlcommanddlg.cpp:117 +msgid "&Type:" +msgstr "Š&ládja:" + #: cups/cupsaddsmb2.cpp:55 cups/cupsaddsmb2.cpp:363 msgid "&Export" msgstr "&Olggosfievrrit" @@ -1126,61 +1188,42 @@ msgstr "Ii gávdnan stivrrana %1 čálánii." msgid "Preparing to install driver on host %1" msgstr "" -#: cups/kmwippselect.cpp:36 -msgid "Remote IPP Printer Selection" -msgstr "" - -#: cups/kmwippselect.cpp:49 -msgid "You must select a printer." -msgstr "Fertet válljet čálána." +#: cups/kmwquota.cpp:46 +msgid "second(s)" +msgstr "sekundda" -#: cups/ipprequest.cpp:110 -msgid "You don't have access to the requested resource." -msgstr "It beasa válljejuvvon resursii." +#: cups/kmwquota.cpp:47 +msgid "minute(s)" +msgstr "minuhta" -#: cups/ipprequest.cpp:113 -msgid "You are not authorized to access the requested resource." -msgstr "" +#: cups/kmwquota.cpp:48 +msgid "hour(s)" +msgstr "diimmu" -#: cups/ipprequest.cpp:116 -msgid "The requested operation cannot be completed." -msgstr "Ii sáhtán čađahit jearahuvvon barggu." +#: cups/kmwquota.cpp:49 +msgid "day(s)" +msgstr "beaivvi" -#: cups/ipprequest.cpp:119 -msgid "The requested service is currently unavailable." -msgstr "Jearahuvvon bálvalus ii leat olamuttus dál." +#: cups/kmwquota.cpp:50 +msgid "week(s)" +msgstr "vahku" -#: cups/ipprequest.cpp:122 -msgid "The target printer is not accepting print jobs." -msgstr "Čálán ii váldde vuostái čálihanbargguid." +#: cups/kmwquota.cpp:51 +msgid "month(s)" +msgstr "mánu" -#: cups/ipprequest.cpp:233 -msgid "" -"Connection to CUPS server failed. Check that the CUPS server is correctly " -"installed and running." +#: cups/kmwquota.cpp:79 +msgid "Printer Quota Settings" msgstr "" -"Oktavuohta CUPS-bálvái filtii. Dárkkis ahte CUPS-bálvá lea sajáiduhttojuvvon ja " -"ahte lea jođus." - -#: cups/ipprequest.cpp:236 -msgid "The IPP request failed for an unknown reason." -msgstr "IPP-jearahus filtii amas siva dihte." - -#: cups/ipprequest.cpp:356 -msgid "Attribute" -msgstr "Attribuhtta" - -#: cups/ipprequest.cpp:357 -msgid "Values" -msgstr "Árvvut" -#: cups/ipprequest.cpp:388 -msgid "True" -msgstr "Duohta" +#: cups/kmpropquota.cpp:78 cups/kmwquota.cpp:84 +msgid "No quota" +msgstr "Eai earrit" -#: cups/ipprequest.cpp:388 -msgid "False" -msgstr "Ii duohta" +#: cups/kmpropquota.cpp:79 cups/kmpropquota.cpp:80 cups/kmwquota.cpp:87 +#: cups/kmwquota.cpp:90 +msgid "None" +msgstr "Ii oktage" #: cups/kmpropquota.cpp:39 cups/kmwquota.cpp:96 msgid "&Period:" @@ -1194,479 +1237,238 @@ msgstr "&Sturrodatrádji (KB):" msgid "&Page limit:" msgstr "S&iiderádji:" -#: cups/kmpropquota.cpp:57 -msgid "Quotas" -msgstr "Earrit" - -#: cups/kmpropquota.cpp:58 -msgid "Quota Settings" -msgstr "Earriheivehusat" - -#: cups/kmpropquota.cpp:78 cups/kmwquota.cpp:84 -msgid "No quota" -msgstr "Eai earrit" - -#: cups/kmpropquota.cpp:79 cups/kmpropquota.cpp:80 cups/kmwquota.cpp:87 -#: cups/kmwquota.cpp:90 -msgid "None" -msgstr "Ii oktage" - -#: cups/kmwipp.cpp:35 -msgid "Remote IPP server" -msgstr "Gáiddus IPP-bálvá" - -#: cups/kmwipp.cpp:39 +#: cups/kmwquota.cpp:104 msgid "" -"

Enter the information concerning the remote IPP server owning the targeted " -"printer. This wizard will poll the server before continuing.

" -msgstr "" - -#: cups/kmwipp.cpp:42 management/kmwlpd.cpp:46 rlpr/kmproprlpr.cpp:34 -#: rlpr/kmwrlpr.cpp:62 -msgid "Host:" -msgstr "Guossoheaddji:" - -#: cups/kmwipp.cpp:43 -msgid "Port:" -msgstr "Verrát:" - -#: cups/kmwipp.cpp:52 management/kmwsmb.cpp:79 -msgid "Empty server name." -msgstr "Guorus bálvánamma." - -#: cups/kmwipp.cpp:59 -msgid "Incorrect port number." -msgstr "Boastu verrátnummir." - -#: cups/kmwipp.cpp:72 -msgid "Unable to connect to %1 on port %2 ." -msgstr "" - -#: cups/kmpropbanners.cpp:49 kpgeneralpage.cpp:297 -msgid "Banners" -msgstr "Leavggat" - -#: cups/kmpropbanners.cpp:50 -msgid "Banner Settings" -msgstr "Leavgaheivehusat" - -#: cups/ippreportdlg.cpp:34 -msgid "IPP Report" -msgstr "IPP-raporta" - -#: cups/ippreportdlg.cpp:93 -msgid "Internal error: unable to generate HTML report." -msgstr "Siskkildas meattáhus: Ii sáhte ráhkadit HTML-raportta." - -#: cups/kmpropusers.cpp:39 cups/kmwusers.cpp:36 -msgid "Users Access Settings" +"

Set here the quota for this printer. Using limits of 0 " +"means that no quota will be used. This is equivalent to set quota period to " +"No quota (-1). Quota limits are defined on a per-user base and " +"applied to all users.

" msgstr "" -#: cups/kmpropusers.cpp:38 cups/kmwusers.cpp:39 -msgid "Users" -msgstr "Geavaheaddjit" - -#: cups/kmwusers.cpp:41 -msgid "Allowed Users" +#: cups/kmwquota.cpp:130 +msgid "You must specify at least one quota limit." msgstr "" -#: cups/kmwusers.cpp:42 -msgid "Denied Users" -msgstr "" +#: cups/kmcupsconfigwidget.cpp:65 +msgid "Server Information" +msgstr "Bálvadiehtu" -#: cups/kmwusers.cpp:44 -msgid "Define here a group of allowed/denied users for this printer." -msgstr "" +#: cups/kmcupsconfigwidget.cpp:66 +msgid "Account Information" +msgstr "Kontodieđut" -#: cups/kmwusers.cpp:45 management/kxmlcommanddlg.cpp:117 -msgid "&Type:" -msgstr "Š&ládja:" +#: cups/kmcupsconfigwidget.cpp:67 rlpr/kmproxywidget.cpp:34 +msgid "&Host:" +msgstr "Guosso&headdji:" -#: cups/kptextpage.cpp:41 -msgid "" -" " -"

Characters Per Inch

" -"

This setting controls the horizontal size of characters when printing a text " -"file.

" -"

The default value is 10, meaning that the font is scaled in a way that 10 " -"characters per inch will be printed.

" -"
" -"

Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"

    -o cpi=...          # example: \"8\" or \"12\"

" -msgstr "" +#: cups/kmcupsconfigwidget.cpp:68 management/kmwsocketutil.cpp:53 +#: management/networkscanner.cpp:339 rlpr/kmproxywidget.cpp:35 +msgid "&Port:" +msgstr "&Verrat:" -#: cups/kptextpage.cpp:55 -msgid "" -" " -"

Lines Per Inch

" -"

This setting controls the vertical size of characters when printing a text " -"file.

" -"

The default value is 6, meaning that the font is scaled in a way that 6 " -"lines per inch will be printed.

" -"
" -"

Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"

    -o lpi=...         # example \"5\" or \"7\"

" -msgstr "" +#: cups/kmcupsconfigwidget.cpp:75 +msgid "&User:" +msgstr "&Geavaheaddji:" -#: cups/kptextpage.cpp:69 -msgid "" -" " -"

Columns

" -"

This setting controls how many columns of text will be printed on each page " -"when. printing text files.

" -"

The default value is 1, meaning that only one column of text per page will " -"be printed.

" -"
" -"

Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"

    -o columns=...     # example: \"2\" or \"4\"

" -msgstr "" +#: cups/kmcupsconfigwidget.cpp:76 +msgid "Pass&word:" +msgstr "&Beassansátni:" -#: cups/kptextpage.cpp:84 -msgid " Preview icon changes when you turn on or off prettyprint. " -msgstr "" +#: cups/kmcupsconfigwidget.cpp:79 +msgid "&Store password in configuration file" +msgstr "Vu&rke beassansáni heivehusfiilii" -#: cups/kptextpage.cpp:87 -msgid "" -" " -"

Text Formats

" -"

These settings control the appearance of text on printouts. They are only " -"valid for printing text files or input directly through kprinter.

" -"

Note: These settings have no effect whatsoever for other input " -"formats than text, or for printing from applications such as the TDE Advanced " -"Text Editor. (Applications in general send PostScript to the print system, and " -"'kate' in particular has its own knobs to control the print output.

. " -"
" -"

Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"

     -o cpi=...         # example: \"8\" or \"12\"  "
-"
     -o lpi=...         # example: \"5\" or \"7\"  "
-"
     -o columns=...     # example: \"2\" or \"4\"

" -msgstr "" +#: cups/kmcupsconfigwidget.cpp:81 +msgid "Use &anonymous access" +msgstr "Geavat &namahis beassama" -#: cups/kptextpage.cpp:108 +#: cups/kpschedulepage.cpp:40 msgid "" -" " -"

Margins

" -"

These settings control the margins of printouts on the paper. They are not " -"valid for jobs originating from applications which define their own page " -"layout internally and send PostScript to TDEPrint (such as KOffice or " -"OpenOffice.org).

" -"

When printing from TDE applications, such as KMail and Konqueror, or " -"printing an ASCII text file through kprinter, you can choose your preferred " -"margin settings here.

" -"

Margins may be set individually for each edge of the paper. The combo box at " -"the bottom lets you change the units of measurement between Pixels, " -"Millimeters, Centimeters, and Inches.

" -"

You can even use the mouse to grab one margin and drag it to the intended " -"position (see the preview picture on the right side).

" +" " +"

Print Job Billing and Accounting

" +"

Insert a meaningful string here to associate the current print job with a " +"certain account. This string will appear in the CUPS \"page_log\" to help with " +"the print accounting in your organization. (Leave it empty if you do not need " +"it.) " +"

It is useful for people who print on behalf of different \"customers\", " +"like print service bureaux, letter shops, press and prepress companies, or " +"secretaries who serve different bosses, etc.

" +"
" "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " -"

     -o page-top=...      # example: \"72\"  "
-"
     -o page-bottom=...   # example: \"24\"  "
-"
     -o page-left=...     # example: \"36\"  "
-"
     -o page-right=...    # example: \"12\"

" +"
    -o job-billing=...         # example: \"Marketing_Department\" or "
+"\"Joe_Doe\"

" msgstr "" -#: cups/kptextpage.cpp:134 +#: cups/kpschedulepage.cpp:60 msgid "" -" " -"

Turn Text Printing with Syntax Highlighting (Prettyprint) On!

" -"

ASCII text file printouts can be 'prettyfied' by enabling this option. If " -"you do so, a header is printed at the top of each page. The header contains " -"the page number, job title (usually the filename), and the date. In addition, C " -"and C++ keywords are highlighted, and comment lines are italicized.

" -"

This prettyprint option is handled by CUPS.

" -"

If you prefer another 'plaintext-to-prettyprint' converter, look for the " -"enscript pre-filter on the Filters tab.

" +" " +"

Scheduled Printing

" +"

Scheduled printing lets you control the time of the actual printout, while " +"you can still send away your job now and have it out of your way. " +"

Especially useful is the \"Never (hold indefinitely)\" option. It allows " +"you to park your job until a time when you (or a printer administrator) decides " +"to manually release it. " +"

This is often required in enterprise environments, where you normally are " +"not allowed to directly and immediately access the huge production printers in " +"your Central Repro Department. However it is okay to send jobs to the " +"queue which is under the control of the operators (who, after all, need to make " +"sure that the 10,000 sheets of pink paper which is required by the Marketing " +"Department for a particular job are available and loaded into the paper " +"trays).

" "
" "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " -"

     -o prettyprint=true.

" +"
    -o job-hold-until=...      # example: \"indefinite\" or \"no-hold\"  "
+"

" msgstr "" -#: cups/kptextpage.cpp:153 +#: cups/kpschedulepage.cpp:87 msgid "" -" " -"

Turn Text Printing with Syntax Highlighting (Prettyprint) Off!

" -"

ASCII text file printing with this option turned off are appearing without a " -"page header and without syntax highlighting. (You can still set the page " -"margins, though.)

" +" " +"

Page Labels

" +"

Page Labels are printed by CUPS at the top and bottom of each page. They " +"appear on the pages surrounded by a little frame box. " +"

They contain any string you type into the line edit field.

" "
" "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " -"

    -o prettyprint=false

" +"
    -o page-label=\"...\"      # example: \"Company Confidential\"
" +"

" msgstr "" -#: cups/kptextpage.cpp:167 +#: cups/kpschedulepage.cpp:102 msgid "" -" " -"

Print Text with Syntax Highlighting (Prettyprint)

" -"

ASCII file printouts can be 'prettyfied' by enabling this option. If you do " -"so, a header is printed at the top of each page. The header contains the page " -"number, job title (usually the filename), and the date. In addition, C and C++ " -"keywords are highlighted, and comment lines are italicized.

" -"

This prettyprint option is handled by CUPS.

" -"

If you prefer another 'plaintext-to-prettyprint' converter, look for the " -"enscript pre-filter on the Filters tab.

" +" " +"

Job Priority

" +"

Usually CUPS prints all jobs per queue according to the \"FIFO\" principle: " +"First In, First Out. " +"

The job priority option allows you to re-order the queue according to your " +"needs. " +"

It works in both directions: you can increase as well as decrease " +"priorities. (Usually you can only control your own jobs). " +"

Since the default job priority is \"50\", any job sent with, for example, " +"\"49\" will be printed only after all those others have finished. Conversely, a " +"\"51\" or higher priority job will go right to the top of a populated queue (if " +"no other, higher prioritized one is present).

" "
" "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " -"

     -o prettyprint=true.  "
-"
     -o prettyprint=false

" -msgstr "" - -#: cups/kptextpage.cpp:188 -msgid "Text" -msgstr "Teaksta" - -#: cups/kptextpage.cpp:191 -msgid "Text Format" -msgstr "Teakstaformáhtta" - -#: cups/kptextpage.cpp:193 -msgid "Syntax Highlighting" -msgstr "Syntáksamerken" - -#: cups/kptextpage.cpp:195 kpmarginpage.cpp:42 kpmarginpage.cpp:45 -msgid "Margins" -msgstr "Siidorávddat" - -#: cups/kptextpage.cpp:200 -msgid "&Chars per inch:" -msgstr "" - -#: cups/kptextpage.cpp:204 -msgid "&Lines per inch:" -msgstr "" - -#: cups/kptextpage.cpp:208 -msgid "C&olumns:" -msgstr "Čuol&ddat:" - -#: cups/kptextpage.cpp:216 -msgid "&Disabled" -msgstr "&Eret" - -#: cups/kptextpage.cpp:218 -msgid "&Enabled" -msgstr "&Alde" - -#: cups/kmconfigcupsdir.cpp:34 -msgid "Folder" -msgstr "Máhppa" - -#: cups/kmconfigcupsdir.cpp:35 -msgid "CUPS Folder Settings" -msgstr "CUPS-máhpa heivehusat" - -#: cups/kmconfigcupsdir.cpp:38 -msgid "Installation Folder" -msgstr "Sajáiduhttinmáhppa" - -#: cups/kmconfigcupsdir.cpp:41 -msgid "Standard installation (/)" -msgstr "Standárdsajáiduhttin (/)" - -#: cups/kptagspage.cpp:36 -msgid "" -" " -"

Additional Tags

You may send additional commands to the CUPS " -"server via this editable list. There are 3 purposes for this: " -"
    " -"
  • Use any current or future standard CUPS job option not supported by the " -"TDEPrint GUI.
    • " -"
  • Control any custom job option you may want to support in custom CUPS " -"filters and backends plugged into the CUPS filtering chain.
    • " -"
  • Send short messages to the operators of your production printers in your " -"Central Repro Department.
" -"

Standard CUPS job options: A complete list of standard CUPS job " -"options is in the CUPS User Manual" -". Mappings of the kprinter user interface widgets to respective CUPS job " -"option names are named in the various WhatsThis help items..

" -"

Custom CUPS job options: CUPS print servers may be customized with " -"additional print filters and backends which understand custom job options. You " -"can specify such custom job options here. If in doubt, ask your system " -"administrator..

" -"

" -"

Operator Messages: You may send additional messages to the " -"operator(s) of your production printers (e.g. in your " -"Central Repro Department

) Messages can be read by the operator(s) (or " -"yourself) by viewing the \"Job IPP Report\" for the job.

" -"Examples:" -"
" -"
 A standard CUPS job option:"
-"
    (Name) number-up                -- (Value) 9                     "
-"
 "
-"
 A job option for custom CUPS filters or backends:"
-"
    (Name) DANKA_watermark          -- "
-"(Value) Company_Confidential   "
-"
 "
-"
 A message to the operator(s):"
-"
    (Name) Deliver_after_completion -- "
-"(Value) to_Marketing_Departm."
-"
" -"

Note: the fields must not include spaces, tabs or quotes. You may " -"need to double-click on a field to edit it. " -"

Warning: Do not use such standard CUPS option names which also can be " -"used through the TDEPrint GUI. Results may be unpredictable if they conflict, " -" or if they are sent multiple times. For all options supported by the GUI, " -"please do use the GUI. (Each GUI element's 'WhatsThis' names the related CUPS " -"option name.)

" +"
    -o job-priority=...   # example: \"10\" or \"66\" or \"99\"
" +"

" msgstr "" -#: cups/kptagspage.cpp:77 -msgid "Additional Tags" -msgstr "Lassesárggit" - -#: cups/kptagspage.cpp:82 tdefilelist.cpp:101 kpfilterpage.cpp:406 -#: management/kmjobviewer.cpp:237 management/kmwend.cpp:51 -#: management/kxmlcommanddlg.cpp:141 management/kxmlcommanddlg.cpp:545 -msgid "Name" -msgstr "Namma" - -#: cups/kptagspage.cpp:83 -msgid "Value" -msgstr "Árvu" +#: cups/kpschedulepage.cpp:126 +msgid "Advanced Options" +msgstr "Erenoamáš molssaeavttut" -#: cups/kptagspage.cpp:92 -msgid "Read-Only" -msgstr "Dusse logahahtti" +#: cups/kpschedulepage.cpp:137 +msgid "Immediately" +msgstr "Dálánaga" -#: cups/kptagspage.cpp:115 -#, fuzzy -msgid "The tag name must not contain any spaces, tabs or quotes: %1." -msgstr "Sárgenamas ii sáhte leat gaskamearkkat: %1." +#: cups/kpschedulepage.cpp:138 +msgid "Never (hold indefinitely)" +msgstr "Ii goassige (vuordde vaikko man guhká)" -#: cups/kmcupsuimanager.cpp:85 -msgid "" -"" -"

Print queue on remote CUPS server

" -"

Use this for a print queue installed on a remote machine running a CUPS " -"server. This allows to use remote printers when CUPS browsing is turned off.

" -"" -msgstr "" +#: cups/kpschedulepage.cpp:139 +msgid "Daytime (6 am - 6 pm)" +msgstr "Beaivet (6-18)" -#: cups/kmcupsuimanager.cpp:92 -msgid "" -"" -"

Network IPP printer

" -"

Use this for a network-enabled printer using the IPP protocol. Modern " -"high-end printers can use this mode. Use this mode instead of TCP if your " -"printer can do both.

" -msgstr "" +#: cups/kpschedulepage.cpp:140 +msgid "Evening (6 pm - 6 am)" +msgstr "Eahkedis (18-6)" -#: cups/kmcupsuimanager.cpp:99 -msgid "" -"" -"

Fax/Modem printer

" -"

Use this for a fax/modem printer. This requires the installation of the fax4CUPS " -"backend. Documents sent on this printer will be faxed to the given target fax " -"number.

" -msgstr "" +#: cups/kpschedulepage.cpp:141 +msgid "Night (6 pm - 6 am)" +msgstr "Ihku (18-6)" -#: cups/kmcupsuimanager.cpp:106 -msgid "" -"" -"

Other printer

" -"

Use this for any printer type. To use this option, you must know the URI of " -"the printer you want to install. Refer to the CUPS documentation for more " -"information about the printer URI. This option is mainly useful for printer " -"types using 3rd party backends not covered by the other possibilities.

" -msgstr "" +#: cups/kpschedulepage.cpp:142 +msgid "Weekend" +msgstr "Vahkkoloahpaid" -#: cups/kmcupsuimanager.cpp:114 -msgid "" -"" -"

Class of printers

" -"

Use this to create a class of printers. When sending a document to a class, " -"the document is actually sent to the first available (idle) printer in the " -"class. Refer to the CUPS documentation for more information about class of " -"printers.

" -msgstr "" +#: cups/kpschedulepage.cpp:143 +msgid "Second Shift (4 pm - 12 am)" +msgstr "Eahketbargovuorru (16-24)" -#: cups/kmcupsuimanager.cpp:127 -msgid "Re&mote CUPS server (IPP/HTTP)" -msgstr "Gá&iddus CUPS-bálvá (IPP/HTTP)" +#: cups/kpschedulepage.cpp:144 +msgid "Third Shift (12 am - 8 am)" +msgstr "Idjabargovuorru (0-8)" -#: cups/kmcupsuimanager.cpp:128 -msgid "Network printer w/&IPP (IPP/HTTP)" -msgstr "Fierpmádatčálán mas lea I&PP (IPP/HTTP)" +#: cups/kpschedulepage.cpp:145 +msgid "Specified Time" +msgstr "Meroštallon áigi" -#: cups/kmcupsuimanager.cpp:129 -msgid "S&erial Fax/Modem printer" -msgstr "&Maŋŋálas fáksa/modem-čálán" +#: cups/kpschedulepage.cpp:160 +#, fuzzy +msgid "&Scheduled printing:" +msgstr "&Pláne čáliheami:" -#: cups/kmcupsuimanager.cpp:130 -msgid "Other &printer type" -msgstr "Eará čálá&nšládja" +#: cups/kpschedulepage.cpp:163 +msgid "&Billing information:" +msgstr "&Rehketdieđuid:" -#: cups/kmcupsuimanager.cpp:132 -msgid "Cl&ass of printers" -msgstr "Čálá&nluohkká" +#: cups/kpschedulepage.cpp:166 +msgid "T&op/Bottom page label:" +msgstr "Oa&ive-/juolgeteaksta:" -#: cups/kmcupsuimanager.cpp:169 -msgid "An error occurred while retrieving the list of available backends:" -msgstr "Filtii vieččadettiin vieččadettiin olamuttus duogáščoavdduslisttu:" +#: cups/kpschedulepage.cpp:169 +msgid "&Job priority:" +msgstr "&Bargoovdavuorru:" -#: cups/kmcupsuimanager.cpp:215 -msgid "Priority" -msgstr "Ovdavuorru" +#: cups/kpschedulepage.cpp:200 +msgid "The time specified is not valid." +msgstr "Addon áigi ii gusto." -#: cups/kmcupsuimanager.cpp:217 -msgid "Billing Information" -msgstr "Rehketdieđut" +#: cups/kmpropquota.cpp:57 +msgid "Quotas" +msgstr "Earrit" -#: cups/kmwfax.cpp:37 -msgid "Fax Serial Device" -msgstr "Maŋŋálas fáksaovttadat" +#: cups/kmpropquota.cpp:58 +msgid "Quota Settings" +msgstr "Earriheivehusat" -#: cups/kmwfax.cpp:41 -msgid "

Select the device which your serial Fax/Modem is connected to.

" -msgstr "" -"

Vállje makkár ovttadahkii maŋŋálas fáksa/modema lea laktašuvvon.

" +#: cups/ippreportdlg.cpp:34 +msgid "IPP Report" +msgstr "IPP-raporta" -#: cups/kmwfax.cpp:71 -msgid "You must select a device." -msgstr "Fertet ovttadaga válljet." +#: cups/ippreportdlg.cpp:93 +msgid "Internal error: unable to generate HTML report." +msgstr "Siskkildas meattáhus: Ii sáhte ráhkadit HTML-raportta." -#: cups/kmcupsmanager.cpp:768 +#: cups/kmcupsmanager.cpp:819 msgid "Library cupsdconf not found. Check your installation." msgstr "Ii gávdnan bibliotehka libcupsdconf. Dárkkis sajáiduhttima." -#: cups/kmcupsmanager.cpp:774 +#: cups/kmcupsmanager.cpp:825 msgid "Symbol %1 not found in cupsdconf library." msgstr "Ii gávdnan symbola %1 libcupsdconf-bibliotehkas." -#: cups/kmcupsmanager.cpp:849 +#: cups/kmcupsmanager.cpp:920 msgid "&Export Driver..." msgstr "O&lggosfievrrit stivrrana …" -#: cups/kmcupsmanager.cpp:851 +#: cups/kmcupsmanager.cpp:922 msgid "&Printer IPP Report" msgstr "Čálá&n-IPP-raporta" -#: cups/kmcupsmanager.cpp:897 cups/kmwippprinter.cpp:218 +#: cups/kmcupsmanager.cpp:968 cups/kmwippprinter.cpp:218 #, c-format msgid "IPP Report for %1" msgstr "IPP-raporta %1 várás" -#: cups/kmcupsmanager.cpp:901 +#: cups/kmcupsmanager.cpp:972 msgid "Unable to retrieve printer information. Error received:" msgstr "Ii sáhte viežžat čálándieđuid. Meattáhus mii vuostáiváldui:" -#: cups/kmcupsmanager.cpp:914 +#: cups/kmcupsmanager.cpp:985 msgid "Server" msgstr "Bálvá" -#: cups/kmcupsmanager.cpp:954 +#: cups/kmcupsmanager.cpp:1025 #, c-format msgid "" "Connection to CUPS server failed. Check that the CUPS server is correctly " @@ -1675,23 +1477,23 @@ msgstr "" "Oktavuohta CUPS-bálvái filtii. Dárkkis ahte CUPS-bálva lea rievttesláhkai " "sajáiduhttojuvvon ja ahte lea jođus. Meattáhus: %1" -#: cups/kmcupsmanager.cpp:955 +#: cups/kmcupsmanager.cpp:1026 msgid "the IPP request failed for an unknown reason" msgstr "IPP-jearáhus filtii amas siva dihte" -#: cups/kmcupsmanager.cpp:989 +#: cups/kmcupsmanager.cpp:1060 msgid "connection refused" msgstr "oktavuohta hilgojuvui" -#: cups/kmcupsmanager.cpp:992 +#: cups/kmcupsmanager.cpp:1063 msgid "host not found" msgstr "guossoheaddji ii gávdnon" -#: cups/kmcupsmanager.cpp:996 +#: cups/kmcupsmanager.cpp:1067 msgid "read failed (%1)" msgstr "" -#: cups/kmcupsmanager.cpp:1000 +#: cups/kmcupsmanager.cpp:1071 #, fuzzy msgid "" "Connection to CUPS server failed. Check that the CUPS server is correctly " @@ -1700,94 +1502,53 @@ msgstr "" "Oktavuohta CUPS-bálvái filtii. Dárkkis ahte CUPS-bálva lea rievttesláhkai " "sajáiduhttojuvvon ja ahte lea jođus. Meattáhus: %1" -#: cups/kphpgl2page.cpp:33 -msgid "" -" Print in Black Only (Blackplot) " -"

The 'blackplot' option specifies that all pens should plot in black-only: " -"The default is to use the colors defined in the plot file, or the standard pen " -"colors defined in the HP-GL/2 reference manual from Hewlett Packard.

" -"
" -"
" -"

Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"

    -o blackplot=true

" -msgstr "" +#: cups/ipprequest.cpp:164 +msgid "You don't have access to the requested resource." +msgstr "It beasa válljejuvvon resursii." -#: cups/kphpgl2page.cpp:48 -msgid "" -" Scale Print Image to Page Size " -"

The 'fitplot' option specifies that the HP-GL image should be scaled to fill " -" exactly the page with the (elsewhere selected) media size.

" -"

The default is 'fitplot is disabled'. The default will therefore use the " -"absolute distances specified in the plot file. (You should be aware that HP-GL " -"files are very often CAD drawings intended for large format plotters. On " -"standard office printers they will therefore lead to the drawing printout " -"being spread across multiple pages.)

" -"

Note:This feature depends upon an accurate plot size (PS) command in " -"the HP-GL/2 file. If no plot size is given in the file the filter converting " -"the HP-GL to PostScript assumes the plot is ANSI E size.

" -"
" -"
" -"

Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"

     -o fitplot=true

" +#: cups/ipprequest.cpp:167 +msgid "You are not authorized to access the requested resource." msgstr "" -#: cups/kphpgl2page.cpp:68 -msgid "" -" Set Pen Width for HP-GL (if not defined in file). " -"

The pen width value can be set here in case the original HP-GL file does not " -"have it set. The pen width specifies the value in micrometers. The default " -"value of 1000 produces lines that are 1000 micrometers == 1 millimeter in " -"width. Specifying a pen width of 0 produces lines that are exactly 1 pixel " -"wide.

" -"

Note: The penwidth option set here is ignored if the pen widths are " -"set inside the plot file itself..

" -"
" -"
" -"

Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"

    -o penwidth=...   # example: \"2000\" or \"500\"

" -msgstr "" +#: cups/ipprequest.cpp:170 +msgid "The requested operation cannot be completed." +msgstr "Ii sáhtán čađahit jearahuvvon barggu." -#: cups/kphpgl2page.cpp:85 +#: cups/ipprequest.cpp:173 +msgid "The requested service is currently unavailable." +msgstr "Jearahuvvon bálvalus ii leat olamuttus dál." + +#: cups/ipprequest.cpp:176 +msgid "The target printer is not accepting print jobs." +msgstr "Čálán ii váldde vuostái čálihanbargguid." + +#: cups/ipprequest.cpp:313 msgid "" -" HP-GL Print Options " -"

All options on this page are only applicable if you use TDEPrint to send " -"HP-GL and HP-GL/2 files to one of your printers.

" -"

HP-GL and HP-GL/2 are page description languages developed by " -"Hewlett-Packard to drive Pen Plotting devices.

" -"

TDEPrint can (with the help of CUPS) convert the HP-GL file format and print " -"it on any installed printer.

" -"

Note 1: To print HP-GL files, start 'kprinter' and simply load the " -"file into the running kprinter.

" -"

Note 2: The 'fitplot' parameter provided on this dialog does also " -"work for printing PDF files (if your CUPS version is more recent than " -"1.1.22).

" -"
" -"
" -"

Additional hint for power users: These TDEPrint GUI elements " -"match with CUPS commandline job option parameters: " -"

     -o blackplot=...  # examples: \"true\" or \"false\"  "
-"
     -o fitplot=...    # examples: \"true\" or \"false\"  "
-"
     -o penwidth=...   # examples: \"true\" or \"false\"

" +"Connection to CUPS server failed. Check that the CUPS server is correctly " +"installed and running." msgstr "" +"Oktavuohta CUPS-bálvái filtii. Dárkkis ahte CUPS-bálvá lea sajáiduhttojuvvon ja " +"ahte lea jođus." -#: cups/kphpgl2page.cpp:113 -msgid "HP-GL/2 Options" -msgstr "HP-GL/2-molssaeavttut" +#: cups/ipprequest.cpp:316 +msgid "The IPP request failed for an unknown reason." +msgstr "IPP-jearahus filtii amas siva dihte." -#: cups/kphpgl2page.cpp:115 -msgid "&Use only black pen" -msgstr "&Geavat dušše čáhpes peanna" +#: cups/ipprequest.cpp:461 +msgid "Attribute" +msgstr "Attribuhtta" -#: cups/kphpgl2page.cpp:118 -msgid "&Fit plot to page" -msgstr "" +#: cups/ipprequest.cpp:462 +msgid "Values" +msgstr "Árvvut" -#: cups/kphpgl2page.cpp:122 -msgid "&Pen width:" -msgstr "&Peannagovdodat:" +#: cups/ipprequest.cpp:500 cups/ipprequest.cpp:567 +msgid "True" +msgstr "Duohta" + +#: cups/ipprequest.cpp:500 cups/ipprequest.cpp:567 +msgid "False" +msgstr "Ii duohta" #: cups/kmwippprinter.cpp:45 msgid "IPP Printer Information" @@ -1811,11 +1572,11 @@ msgstr "&IPP-raporta" msgid "You must enter a printer URI." msgstr "Fertet addit čálán-URI:a." -#: cups/kmwippprinter.cpp:119 management/kmwsocket.cpp:116 +#: cups/kmwippprinter.cpp:119 management/kmwsocket.cpp:117 msgid "No printer found at this address/port." msgstr "Ii gávdnan čálán dán čujuhusas/verráhis." -#: cups/kmwippprinter.cpp:139 management/kmwsocket.cpp:135 +#: cups/kmwippprinter.cpp:139 management/kmwsocket.cpp:136 msgid "" "_: Unknown host - 1 is the IP\n" " (%1)" @@ -1891,98 +1652,21 @@ msgstr "URI:" msgid "CUPS Server %1:%2" msgstr "CUPS-bálvá %1:%2" -#: cups/kmcupsconfigwidget.cpp:65 -msgid "Server Information" -msgstr "Bálvadiehtu" - -#: cups/kmcupsconfigwidget.cpp:66 -msgid "Account Information" -msgstr "Kontodieđut" - -#: cups/kmcupsconfigwidget.cpp:67 rlpr/kmproxywidget.cpp:34 -msgid "&Host:" -msgstr "Guosso&headdji:" - -#: cups/kmcupsconfigwidget.cpp:68 management/kmwsocketutil.cpp:53 -#: management/networkscanner.cpp:339 rlpr/kmproxywidget.cpp:35 -msgid "&Port:" -msgstr "&Verrat:" - -#: cups/kmcupsconfigwidget.cpp:75 -msgid "&User:" -msgstr "&Geavaheaddji:" - -#: cups/kmcupsconfigwidget.cpp:76 -msgid "Pass&word:" -msgstr "&Beassansátni:" - -#: cups/kmcupsconfigwidget.cpp:79 -msgid "&Store password in configuration file" -msgstr "Vu&rke beassansáni heivehusfiilii" - -#: cups/kmcupsconfigwidget.cpp:81 -msgid "Use &anonymous access" -msgstr "Geavat &namahis beassama" - -#: cups/kmwquota.cpp:46 -msgid "second(s)" -msgstr "sekundda" - -#: cups/kmwquota.cpp:47 -msgid "minute(s)" -msgstr "minuhta" - -#: cups/kmwquota.cpp:48 -msgid "hour(s)" -msgstr "diimmu" - -#: cups/kmwquota.cpp:49 -msgid "day(s)" -msgstr "beaivvi" - -#: cups/kmwquota.cpp:50 -msgid "week(s)" -msgstr "vahku" - -#: cups/kmwquota.cpp:51 -msgid "month(s)" -msgstr "mánu" - -#: cups/kmwquota.cpp:79 -msgid "Printer Quota Settings" -msgstr "" - -#: cups/kmwquota.cpp:104 -msgid "" -"

Set here the quota for this printer. Using limits of 0 " -"means that no quota will be used. This is equivalent to set quota period to " -"No quota (-1). Quota limits are defined on a per-user base and " -"applied to all users.

" -msgstr "" - -#: cups/kmwquota.cpp:130 -msgid "You must specify at least one quota limit." -msgstr "" - -#: cups/kmconfigcups.cpp:32 -msgid "CUPS Server" -msgstr "CUPS-bálvá" - -#: cups/kmconfigcups.cpp:33 -msgid "CUPS Server Settings" -msgstr "CUPS-bálvá heivehusat" +#: cups/kmpropbanners.cpp:35 cups/kmwbanners.cpp:92 +msgid "&Starting banner:" +msgstr "Ál&goleavga:" -#: cups/kmpropusers.cpp:55 -msgid "Denied users" -msgstr "" +#: cups/kmpropbanners.cpp:36 cups/kmwbanners.cpp:93 +msgid "&Ending banner:" +msgstr "Loa&hpaleavga:" -#: cups/kmpropusers.cpp:62 -msgid "Allowed users" -msgstr "" +#: cups/kmpropbanners.cpp:49 kpgeneralpage.cpp:298 +msgid "Banners" +msgstr "Leavggat" -#: cups/kmpropusers.cpp:76 -msgid "All users allowed" -msgstr "" +#: cups/kmpropbanners.cpp:50 +msgid "Banner Settings" +msgstr "Leavgaheivehusat" #: cups/kpimagepage.cpp:44 msgid "" @@ -2255,942 +1939,1001 @@ msgstr "" msgid "&Image size type:" msgstr "" -#: cups/kmcupsjobmanager.cpp:277 +#: cups/kmcupsjobmanager.cpp:349 msgid "Job Report" msgstr "Bargoraporta" -#: cups/kmcupsjobmanager.cpp:279 cups/kmcupsjobmanager.cpp:384 +#: cups/kmcupsjobmanager.cpp:351 cups/kmcupsjobmanager.cpp:456 msgid "Unable to retrieve job information: " msgstr "Ii sáhte viežžat bargodieđuid: " -#: cups/kmcupsjobmanager.cpp:288 +#: cups/kmcupsjobmanager.cpp:360 msgid "&Job IPP Report" msgstr "IPP-&bargoraporta" -#: cups/kmcupsjobmanager.cpp:290 +#: cups/kmcupsjobmanager.cpp:362 msgid "&Increase Priority" msgstr "&Stuorit ovdavuorru" -#: cups/kmcupsjobmanager.cpp:292 +#: cups/kmcupsjobmanager.cpp:364 msgid "&Decrease Priority" msgstr "&Unnit ovdavuorru" -#: cups/kmcupsjobmanager.cpp:294 +#: cups/kmcupsjobmanager.cpp:366 msgid "&Edit Attributes..." msgstr "&Doaimmat attribuhta …" -#: cups/kmcupsjobmanager.cpp:347 +#: cups/kmcupsjobmanager.cpp:419 msgid "Unable to change job priority: " msgstr "Ii sáhte rievdadit bargoovdavuoru: " -#: cups/kmcupsjobmanager.cpp:405 +#: cups/kmcupsjobmanager.cpp:477 #, c-format msgid "Unable to find printer %1." msgstr "Ii gávnna %1 čálána." -#: cups/kmcupsjobmanager.cpp:422 +#: cups/kmcupsjobmanager.cpp:494 msgid "Attributes of Job %1@%2 (%3)" msgstr "%1@%2 (%3) barggu attribuhtat" -#: cups/kmcupsjobmanager.cpp:444 +#: cups/kmcupsjobmanager.cpp:516 msgid "Unable to set job attributes: " msgstr "Ii sáhte bidjat barggu attribuhtaid: " -#: rlpr/krlprprinterimpl.cpp:73 -msgid "The printer is incompletely defined. Try to reinstall it." -msgstr "" - -#: rlpr/kmproprlpr.cpp:49 rlpr/kmwrlpr.cpp:50 -msgid "Remote LPD Queue Settings" -msgstr "Gáiddus LPD-gárgadasaid heivehusat" - -#: management/kmwlpd.cpp:47 rlpr/kmproprlpr.cpp:35 rlpr/kmwrlpr.cpp:63 -msgid "Queue:" -msgstr "Gárgadas:" - -#: rlpr/kmrlprmanager.cpp:47 rlpr/kmwrlpr.cpp:85 -msgid "Empty host name." -msgstr "Guorus guossoheaddjenamma." - -#: rlpr/kmrlprmanager.cpp:49 rlpr/kmwrlpr.cpp:87 -msgid "Empty queue name." -msgstr "Guorus gárgadasnamma." - -#: rlpr/kmwrlpr.cpp:124 -msgid "Remote queue %1 on %2" -msgstr "Fierpmádatgárgadas %1 dáppe %2" - -#: rlpr/kmwrlpr.cpp:199 -msgid "No Predefined Printers" -msgstr "Eai leat ovdagihtii meroštuvvon čálánat" - -#: management/kmwend.cpp:82 rlpr/kmproprlpr.cpp:48 -msgid "Queue" -msgstr "Gárgadas" - -#: management/kmwsmb.cpp:81 rlpr/kmrlprmanager.cpp:45 -msgid "Empty printer name." -msgstr "Guorus čálánnamma." - -#: rlpr/kmrlprmanager.cpp:63 -msgid "Printer not found." -msgstr "Čálán ii gávdnon." +#: cups/kmwipp.cpp:35 +msgid "Remote IPP server" +msgstr "Gáiddus IPP-bálvá" -#: rlpr/kmrlprmanager.cpp:75 -msgid "Not implemented yet." +#: cups/kmwipp.cpp:39 +msgid "" +"

Enter the information concerning the remote IPP server owning the targeted " +"printer. This wizard will poll the server before continuing.

" msgstr "" -#: rlpr/kmconfigproxy.cpp:29 -msgid "Proxy" -msgstr "Gaskabálvá" - -#: rlpr/kmconfigproxy.cpp:30 -msgid "RLPR Proxy Server Settings" -msgstr "RPLR-gaskabálvvá heivehusat" - -#: rlpr/kmproxywidget.cpp:32 -msgid "Proxy Settings" -msgstr "Gaskabálváheivehusat" - -#: rlpr/kmproxywidget.cpp:36 -msgid "&Use proxy server" -msgstr "&Geavat gaskabálvá" - -#: kmjob.cpp:114 -msgid "Queued" -msgstr "Gárgaduvvon" - -#: kmjob.cpp:117 -msgid "Held" -msgstr "Dollejuvvon" - -#: kmjob.cpp:123 -msgid "Canceled" -msgstr "Gaskkalduvvon" - -#: kmjob.cpp:126 -msgid "Aborted" -msgstr "Gaskkalduvvon" - -#: kmjob.cpp:129 -msgid "Completed" -msgstr "Geargan" - -#: tools/escputil/escpwidget.cpp:45 -msgid "EPSON InkJet Printer Utilities" -msgstr "EPSON-leahkkačálániid reaiddut" - -#: tools/escputil/escpwidget.cpp:91 -msgid "&Use direct connection (might need root permissions)" -msgstr "" +#: cups/kmwipp.cpp:42 management/kmwlpd.cpp:46 rlpr/kmproprlpr.cpp:34 +#: rlpr/kmwrlpr.cpp:62 +msgid "Host:" +msgstr "Guossoheaddji:" -#: management/kmwsmb.cpp:46 tools/escputil/escpwidget.cpp:99 -msgid "Printer:" -msgstr "Čálán:" +#: cups/kmwipp.cpp:43 +msgid "Port:" +msgstr "Verrát:" -#: management/kminfopage.cpp:54 management/kminfopage.cpp:93 -#: tools/escputil/escpwidget.cpp:101 -msgid "Device:" -msgstr "Ovttadat:" +#: cups/kmwipp.cpp:52 management/kmwsmb.cpp:79 +msgid "Empty server name." +msgstr "Guorus bálvánamma." -#: tools/escputil/escpwidget.cpp:103 -msgid "Clea&n print head" -msgstr "Čo&rge čálánoaivvi" +#: cups/kmwipp.cpp:59 +msgid "Incorrect port number." +msgstr "Boastu verrátnummir." -#: tools/escputil/escpwidget.cpp:104 -msgid "&Print a nozzle test pattern" +#: cups/kmwipp.cpp:72 +msgid "Unable to connect to %1 on port %2 ." msgstr "" -#: tools/escputil/escpwidget.cpp:105 -msgid "&Align print head" +#: cups/kptagspage.cpp:36 +msgid "" +" " +"

Additional Tags

You may send additional commands to the CUPS " +"server via this editable list. There are 3 purposes for this: " +"
    " +"
  • Use any current or future standard CUPS job option not supported by the " +"TDEPrint GUI.
    • " +"
  • Control any custom job option you may want to support in custom CUPS " +"filters and backends plugged into the CUPS filtering chain.
    • " +"
  • Send short messages to the operators of your production printers in your " +"Central Repro Department.
" +"

Standard CUPS job options: A complete list of standard CUPS job " +"options is in the CUPS User Manual" +". Mappings of the kprinter user interface widgets to respective CUPS job " +"option names are named in the various WhatsThis help items..

" +"

Custom CUPS job options: CUPS print servers may be customized with " +"additional print filters and backends which understand custom job options. You " +"can specify such custom job options here. If in doubt, ask your system " +"administrator..

" +"

" +"

Operator Messages: You may send additional messages to the " +"operator(s) of your production printers (e.g. in your " +"Central Repro Department

) Messages can be read by the operator(s) (or " +"yourself) by viewing the \"Job IPP Report\" for the job.

" +"Examples:" +"
" +"
 A standard CUPS job option:"
+"
    (Name) number-up                -- (Value) 9                     "
+"
 "
+"
 A job option for custom CUPS filters or backends:"
+"
    (Name) DANKA_watermark          -- "
+"(Value) Company_Confidential   "
+"
 "
+"
 A message to the operator(s):"
+"
    (Name) Deliver_after_completion -- "
+"(Value) to_Marketing_Departm."
+"
" +"

Note: the fields must not include spaces, tabs or quotes. You may " +"need to double-click on a field to edit it. " +"

Warning: Do not use such standard CUPS option names which also can be " +"used through the TDEPrint GUI. Results may be unpredictable if they conflict, " +" or if they are sent multiple times. For all options supported by the GUI, " +"please do use the GUI. (Each GUI element's 'WhatsThis' names the related CUPS " +"option name.)

" msgstr "" -#: tools/escputil/escpwidget.cpp:106 -msgid "&Ink level" -msgstr "Leahkka&dássi" - -#: tools/escputil/escpwidget.cpp:107 -msgid "P&rinter identification" -msgstr "Čálán&identifikašuvdna" - -#: tools/escputil/escpwidget.cpp:153 -msgid "Internal error: no device set." -msgstr "Siskkildas meattáhus: ii leat ovttadat válljejuvvon." +#: cups/kptagspage.cpp:77 +msgid "Additional Tags" +msgstr "Lassesárggit" -#: tools/escputil/escpwidget.cpp:164 -#, c-format -msgid "Unsupported connection type: %1" -msgstr "" +#: cups/kptagspage.cpp:82 kpfilterpage.cpp:406 management/kmjobviewer.cpp:237 +#: management/kmwend.cpp:51 management/kxmlcommanddlg.cpp:141 +#: management/kxmlcommanddlg.cpp:545 tdefilelist.cpp:101 +msgid "Name" +msgstr "Namma" -#: tools/escputil/escpwidget.cpp:171 -msgid "" -"An escputil process is still running. You must wait until its completion before " -"continuing." -msgstr "" +#: cups/kptagspage.cpp:83 +msgid "Value" +msgstr "Árvu" -#: tools/escputil/escpwidget.cpp:179 -msgid "" -"The executable escputil cannot be found in your PATH environment variable. Make " -"sure gimp-print is installed and that escputil is in your PATH." -msgstr "" +#: cups/kptagspage.cpp:92 +msgid "Read-Only" +msgstr "Dusse logahahtti" -#: tools/escputil/escpwidget.cpp:204 -msgid "Internal error: unable to start escputil process." -msgstr "" +#: cups/kptagspage.cpp:115 +#, fuzzy +msgid "The tag name must not contain any spaces, tabs or quotes: %1." +msgstr "Sárgenamas ii sáhte leat gaskamearkkat: %1." -#: tools/escputil/escpwidget.cpp:214 -msgid "Operation terminated with errors." -msgstr "" +#: cups/kmwbanners.cpp:57 +msgid "No Banner" +msgstr "Eai leavggat" -#: kpfilterpage.cpp:409 tools/escputil/escpwidget.cpp:217 -msgid "Output" -msgstr "Olggos" +#: cups/kmwbanners.cpp:58 +msgid "Classified" +msgstr "Juogustuvvon" -#: management/kmmainview.cpp:71 -msgid "" -"The printer %1 already exists. Continuing will overwrite existing printer. Do " -"you want to continue?" -msgstr "" -"Čálán %1 gávdno juo. Jos joatkkát de buhttet boares čálána. Halidatgo joatkit?" +#: cups/kmwbanners.cpp:59 +msgid "Confidential" +msgstr "Suollemas" -#: management/kmmainview.cpp:132 management/kmmainview.cpp:779 -#: management/kmmainview.cpp:855 management/kmmainview.cpp:879 -msgid "Initializing manager..." -msgstr "Válbmemin gieđahalli …" +#: cups/kmwbanners.cpp:60 +msgid "Secret" +msgstr "Suollemas" -#: management/kmmainview.cpp:179 -msgid "&Icons,&List,&Tree" -msgstr "&Govažat,&Listu,&Muorra" +#: cups/kmwbanners.cpp:61 +msgid "Standard" +msgstr "Standárda" -#: management/kmmainview.cpp:183 -msgid "Start/Stop Printer" -msgstr "Bija johtui/bisset čálána" +#: cups/kmwbanners.cpp:62 +msgid "Top Secret" +msgstr "Hui suollemas" -#: management/kmmainview.cpp:185 -msgid "&Start Printer" -msgstr "&Bija čálána johtui" +#: cups/kmwbanners.cpp:63 +msgid "Unclassified" +msgstr "Ii juogustuvvon" -#: management/kmmainview.cpp:186 -msgid "Sto&p Printer" -msgstr "Bi&sset čálána" +#: cups/kmwbanners.cpp:86 +msgid "Banner Selection" +msgstr "Vállje leavggaid" -#: management/kmmainview.cpp:188 -msgid "Enable/Disable Job Spooling" +#: cups/kmwbanners.cpp:99 +msgid "" +"

Select the default banners associated with this printer. These banners will " +"be inserted before and/or after each print job sent to the printer. If you " +"don't want to use banners, select No Banner.

" msgstr "" -#: management/kmmainview.cpp:190 -msgid "&Enable Job Spooling" +#: cups/kmwfax.cpp:39 +msgid "Fax Serial Device" +msgstr "Maŋŋálas fáksaovttadat" + +#: cups/kmwfax.cpp:43 +msgid "

Select the device which your serial Fax/Modem is connected to.

" msgstr "" +"

Vállje makkár ovttadahkii maŋŋálas fáksa/modema lea laktašuvvon.

" -#: management/kmmainview.cpp:191 -msgid "&Disable Job Spooling" +#: cups/kmwfax.cpp:81 +msgid "You must select a device." +msgstr "Fertet ovttadaga válljet." + +#: foomatic/kfoomaticprinterimpl.cpp:51 lpdunix/klpdunixprinterimpl.cpp:72 +msgid "" +"No valid print executable was found in your path. Check your installation." msgstr "" +"Ii gávdnan gustojeaddji čálihangohččun ohcanbálgás (PATH). Dárkkis " +"sajáiduhttima." -#: management/kmmainview.cpp:194 -msgid "&Configure..." -msgstr "&Heivet …" +#: foomatic/kmfoomaticmanager.cpp:70 +msgid "This is not a Foomatic printer" +msgstr "Dát ii leat Foomatic-čálán" -#: management/kmmainview.cpp:195 -msgid "Add &Printer/Class..." -msgstr "Lasit čálána/&luohká …" +#: foomatic/kmfoomaticmanager.cpp:75 +msgid "Some printer information are missing" +msgstr "Váilu muhton čálándieđuid" -#: management/kmmainview.cpp:196 -msgid "Add &Special (pseudo) Printer..." -msgstr "Lasit erenomáš (pseudo)čálána …" +#: kmmanager.cpp:70 +msgid "This operation is not implemented." +msgstr "" -#: management/kmmainview.cpp:197 -msgid "Set as &Local Default" -msgstr "Geavat báikkálaš &standárdan" +#: kmmanager.cpp:169 +msgid "Unable to locate test page." +msgstr "Ii gávdnan geahččalansiiddu." -#: management/kmmainview.cpp:198 -msgid "Set as &User Default" -msgstr "Geavat standárdan &geavaheddjiide" +#: kmmanager.cpp:449 +msgid "Can't overwrite regular printer with special printer settings." +msgstr "" -#: management/kmmainview.cpp:199 -msgid "&Test Printer..." -msgstr "&Geahččal čálána …" +#: kmmanager.cpp:478 +#, c-format +msgid "Parallel Port #%1" +msgstr "Bálddalasverrát %1" -#: management/kmmainview.cpp:200 -msgid "Configure &Manager..." -msgstr "H&eivet gieđahalli …" +#: kmmanager.cpp:486 kmmanager.cpp:502 kxmlcommand.cpp:661 +#, c-format +msgid "Unable to load TDE print management library: %1" +msgstr "" -#: management/kmmainview.cpp:201 -msgid "Initialize Manager/&View" -msgstr "Válbme &gieđahalli/čájeheami" +#: kmmanager.cpp:491 kxmlcommand.cpp:669 +msgid "Unable to find wizard object in management library." +msgstr "" -#: management/kmmainview.cpp:203 -msgid "&Orientation" +#: kmmanager.cpp:507 +msgid "Unable to find options dialog in management library." msgstr "" -#: management/kmmainview.cpp:206 -msgid "&Vertical,&Horizontal" -msgstr "&Ceaggu,&Veallu" +#: kmmanager.cpp:534 +msgid "No plugin information available" +msgstr "" -#: management/kmmainview.cpp:210 -msgid "R&estart Server" -msgstr "Álggat &bálvá ođđasit" +#: kprintpreview.cpp:140 +msgid "Do you want to continue printing anyway?" +msgstr "Háliidatgo liikká joatkit čáliheames?" -#: management/kmmainview.cpp:211 -msgid "Configure &Server..." -msgstr "Heivet &bálvá …" +#: kprintpreview.cpp:148 kprintpreview.cpp:227 +msgid "Print Preview" +msgstr "Ovdačájeheapmi" -#: management/kmmainview.cpp:214 -msgid "Hide &Toolbar" -msgstr "Čiega &reaidolinnjá" +#: kprintpreview.cpp:278 +msgid "" +"The preview program %1 cannot be found. Check that the program is correctly " +"installed and located in a directory included in your PATH environment " +"variable." +msgstr "" +"Ii gávdnan ovdačájehanprográmma %1. Dárkkis ahte prográmma lea " +"sajáiduhttojuvvon ja lea muhton ozus mii gávdno PATH-birasvariábelis." -#: management/kmmainview.cpp:216 -msgid "Show Me&nu Toolbar" -msgstr "Čájet &fálloreaidolinnjá" +#: kprintpreview.cpp:303 +msgid "" +"Preview failed: neither the internal TDE PostScript viewer (KGhostView) nor any " +"other external PostScript viewer could be found." +msgstr "" +"Ovdačájeheapmi filtii: Ii gávdnan TDE:a siskkildas PostScript-čájeheaddji " +"(KGhostView) iige muhton eará olgguldas PostScript-čájeheaddji." -#: management/kmmainview.cpp:217 -msgid "Hide Me&nu Toolbar" -msgstr "Čiega &fálloreaidoholga" +#: kprintpreview.cpp:307 +#, c-format +msgid "" +"Preview failed: TDE could not find any application to preview files of type %1." +msgstr "" +"Ovdačájeheapmi filtii: TDE ii gávdnan prográmma mainna čájeha fiillat mas lea " +"šládja: %1." -#: management/kmmainview.cpp:219 -msgid "Show Pr&inter Details" -msgstr "Čáj&et čálánbienaid" +#: kprintpreview.cpp:317 +#, c-format +msgid "Preview failed: unable to start program %1." +msgstr "Ovdačájeheapmi filtii: Ii sáhttán álggahit prográmma %1." -#: management/kmmainview.cpp:220 -msgid "Hide Pr&inter Details" -msgstr "Č&iega čálánbienaid" +#: kprintpreview.cpp:322 +msgid "Do you want to continue printing?" +msgstr "Háliidatgo joatkit čállimis?" -#: management/kmmainview.cpp:224 -msgid "Toggle Printer &Filtering" +#: marginwidget.cpp:37 +msgid "" +" " +"

Top Margin

. " +"

This spinbox/text edit field lets you control the top margin of your " +"printout if the printing application does not define its margins internally. " +"

" +"

The setting works for instance for ASCII text file printing, or for printing " +"from KMail and and Konqueror..

" +"

Note:

This margin setting is not intended for KOffice or " +"OpenOffice.org printing, because these applications (or rather their users) " +"are expected to do it by themselves. It also does not work for PostScript or " +"PDF file, which in most cases have their margins hardcoded internally.

" +"
" +"
" +"

Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"

    -o page-top=...      # use values from \"0\" or higher. \"72\" is "
+"equal to 1 inch.

" msgstr "" -#: management/kmmainview.cpp:228 -msgid "%1 &Handbook" -msgstr "%1-&giehtagirji" - -#: management/kmmainview.cpp:229 -msgid "%1 &Web Site" -msgstr "%1 &fierpmádatbáiki" +#: marginwidget.cpp:57 +msgid "" +" " +"

Bottom Margin

. " +"

This spinbox/text edit field lets you control the bottom margin of your " +"printout if the printing application does not define its margins internally. " +"

" +"

The setting works for instance for ASCII text file printing, or for printing " +"from KMail and and Konqueror.

" +"

Note:

This margin setting is not intended for KOffice or " +"OpenOffice.org printing, because these applications (or rather their users) " +"are expected to do it by themselves. It also does not work for PostScript or " +"PDF file, which in most cases have their margins hardcoded internally.

" +"
" +"
" +"

Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"

    -o page-bottom=...      # use values from \"0\" or higher. \"72\" is "
+"equal to 1 inch.
" +msgstr "" -#: management/kmmainview.cpp:231 -msgid "Pri&nter Tools" -msgstr "Čá&lánreaiddut" +#: marginwidget.cpp:76 +msgid "" +" " +"

Left Margin

. " +"

This spinbox/text edit field lets you control the left margin of your " +"printout if the printing application does not define its margins internally. " +"

" +"

The setting works for instance for ASCII text file printing, or for printing " +"from KMail and and Konqueror.

" +"

Note:

This margin setting is not intended for KOffice or " +"OpenOffice.org printing, because these applications (or rather their users) " +"are expected to do it by themselves. It also does not work for PostScript or " +"PDF file, which in most cases have their margins hardcoded internally.

" +"
" +"
" +"

Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"

    -o page-left=...      # use values from \"0\" or higher. \"72\" is "
+"equal to 1 inch.
" +msgstr "" -#: management/kmmainview.cpp:296 -msgid "Print Server" -msgstr "Čálánbálvá" +#: marginwidget.cpp:95 +msgid "" +" " +"

Right Margin

. " +"

This spinbox/text edit field lets you control the right margin of your " +"printout if the printing application does not define its margins internally. " +"

" +"

The setting works for instance for ASCII text file printing, or for printing " +"from KMail and and Konqueror.

" +"

Note:

This margin setting is not intended for KOffice or " +"OpenOffice.org printing, because these applications (or rather their users) " +"are expected to do it by themselves. It also does not work for PostScript or " +"PDF file, which in most cases have their margins hardcoded internally.

" +"
" +"
" +"

Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"

    -o page-right=...      # use values from \"0\" or higher. \"72\" is "
+"equal to 1 inch.
" +msgstr "" -#: management/kmmainview.cpp:302 -msgid "Print Manager" -msgstr "Čálihangieđahalli" +#: marginwidget.cpp:114 +msgid "" +" " +"

Change Measurement Unit

. " +"

You can change the units of measurement for the page margins here. Select " +"from Millimeter, Centimeter, Inch or Pixels (1 pixel == 1/72 inch).

" +msgstr "" -#: management/kmmainview.cpp:319 -msgid "Documentation" -msgstr "Veahkketeaksta" +#: marginwidget.cpp:121 +msgid "" +" " +"

Custom Margins Checkbox

. " +"

Enable this checkbox if you want to modify the margins of your printouts " +"

You can change margin settings in 4 ways: " +"

    " +"
  • Edit the text fields.
    • " +"
  • Click spinbox arrows.
    • " +"
  • Scroll wheel of wheelmouses.
    • " +"
  • Drag margins in preview frame with mouse.
Note: " +"The margin setting does not work if you load such files directly into " +"kprinter, which have their print margins hardcoded internally, like as most " +"PDF or PostScript files. It works for all ASCII text files however. It also may " +"not work with non-TDE applications which fail to fully utilize the TDEPrint " +"framework, such as OpenOffice.org.

" +msgstr "" -#: management/kmmainview.cpp:340 -msgid "An error occurred while retrieving the printer list." -msgstr "Meattáhus dáhpáhuvai vieččadettiin čálinlisttu." +#: marginwidget.cpp:138 +msgid "" +" " +"

\"Drag-your-Margins\"

. " +"

Use your mouse to drag and set each margin on this little preview window. " +"

" +msgstr "" -#: management/kmmainview.cpp:514 -#, c-format -msgid "Unable to modify the state of printer %1." -msgstr "Ii sáhte rievdadit čálándili %1." +#: marginwidget.cpp:148 +msgid "&Use custom margins" +msgstr "Geavat &iešmeroštuvvon siidoravddaid" -#: management/kmmainview.cpp:525 -msgid "Do you really want to remove %1?" -msgstr "Háliidatgo duođas váldit %1 eret?" +#: marginwidget.cpp:158 +msgid "&Top:" +msgstr "&Badjin:" -#: management/kmmainview.cpp:529 -#, c-format -msgid "Unable to remove special printer %1." -msgstr "Ii sáhte váldit erenoamáščálána %1 eret." +#: marginwidget.cpp:159 +msgid "&Bottom:" +msgstr "&Vuollin:" -#: management/kmmainview.cpp:532 -#, c-format -msgid "Unable to remove printer %1." -msgstr "Ii sáhte váldit čálána %1 eret." +#: marginwidget.cpp:160 +msgid "Le&ft:" +msgstr "G&urut:" -#: management/kmmainview.cpp:562 -#, c-format -msgid "Configure %1" -msgstr "Heivet %1" +#: marginwidget.cpp:161 +msgid "&Right:" +msgstr "&Olgeš:" -#: management/kmmainview.cpp:569 -#, c-format -msgid "Unable to modify settings of printer %1." -msgstr "Ii sáhte rievdadit čálánheivehusat %1 várás." +#: marginwidget.cpp:164 +msgid "Pixels (1/72nd in)" +msgstr "Govvačuoggát (1/72 duma)" -#: management/kmmainview.cpp:573 -#, c-format -msgid "Unable to load a valid driver for printer %1." -msgstr "Ii sáhte viežžat gustojeaddji stivrrana %1 čálána várás." +#: marginwidget.cpp:167 +msgid "Inches (in)" +msgstr "Dumat (in)" -#: management/kmmainview.cpp:585 -msgid "Unable to create printer." -msgstr "Ii sáhte ráhkadit čálána." +#: marginwidget.cpp:168 +msgid "Centimeters (cm)" +msgstr "Centimehtarat (cm)" -#: management/kmmainview.cpp:597 -msgid "Unable to define printer %1 as default." -msgstr "Ii sáhte meroštit čálána %1 standárdan." +#: marginwidget.cpp:169 +msgid "Millimeters (mm)" +msgstr "Millimehterat (mm)" -#: management/kminstancepage.cpp:265 management/kmmainview.cpp:632 -msgid "You are about to print a test page on %1. Do you want to continue?" -msgstr "Don viggat čállit geahččalansiiddu %1 čálánis. Halidatgo joatkit?" +#: kprinterimpl.cpp:156 +msgid "Cannot copy multiple files into one file." +msgstr "Ii sáhte máŋget máŋga fiilla okta fiilii." -#: management/kminstancepage.cpp:265 management/kmmainview.cpp:632 -msgid "Print Test Page" -msgstr "Čálit geahččalansiiddu" +#: kprinterimpl.cpp:165 +msgid "Cannot save print file to %1. Check that you have write access to it." +msgstr "" +"Ii sáhttán vurket čálihanfiilla deike: %1. Dárkkis ahte leat " +"čállinvuoigatvuođat dasa." -#: management/kminstancepage.cpp:270 management/kmmainview.cpp:635 +#: kprinterimpl.cpp:233 #, c-format -msgid "Test page successfully sent to printer %1." -msgstr "Lihkostuvai sáddet geahččalansiiddu %1 čálánii." +msgid "Printing document: %1" +msgstr "Čáliheamen dokumeantta: %1" -#: management/kmmainview.cpp:637 +#: kprinterimpl.cpp:251 #, c-format -msgid "Unable to test printer %1." -msgstr "Ii sáhte geahččalit %1 čálána." - -#: management/kmmainview.cpp:650 -msgid "Error message received from manager:

%1

" -msgstr "Meattáhusdieđu gieđahallis:

%1

" - -#: management/kmmainview.cpp:652 -msgid "Internal error (no error message)." -msgstr "Siskkildas meattáhus (ii leat meattáhusdieđu)" - -#: management/kmmainview.cpp:670 -msgid "Unable to restart print server." -msgstr "Ii sáhte álggahit čálihanbálvá ođđasit." - -#: management/kmmainview.cpp:675 -msgid "Restarting server..." -msgstr "Álggaheamen bálvá ođđasit … " +msgid "Sending print data to printer: %1" +msgstr "Sáddemin čálihandáhtáid čálánii: %1" -#: management/kmmainview.cpp:685 -msgid "Unable to configure print server." -msgstr "Ii sáhte heivehit čálihanbálvvá." +#: kprinterimpl.cpp:279 +msgid "Unable to start child print process. " +msgstr "Ii sáhttán álggahit vuolleproseassa čáliheapmái. " -#: management/kmmainview.cpp:690 -msgid "Configuring server..." -msgstr "Heiveheamen čálihanbálvva …" +#: kprinterimpl.cpp:281 +msgid "" +"The TDE print server (tdeprintd) could not be contacted. Check that this " +"server is running." +msgstr "" +"Ii ožžon oktavuođa TDE-čálihanbálváin (tdeprintd" +"). Dárkkis ahte bálvá lea jođus." -#: management/kmmainview.cpp:838 +#: kprinterimpl.cpp:283 msgid "" -"Unable to start printer tool. Possible reasons are: no printer selected, the " -"selected printer doesn't have any local device defined (printer port), or the " -"tool library could not be found." +"_: 1 is the command that is given to\n" +"Check the command syntax:\n" +"%1 " msgstr "" +"Dárkkis gohččunsyntávssa:\n" +"%1 " -#: management/kmmainview.cpp:862 -msgid "Unable to retrieve the printer list." -msgstr "Ii sáhte viežžat čálánlisttu." +#: kprinterimpl.cpp:290 +msgid "No valid file was found for printing. Operation aborted." +msgstr "" -#: management/kmconfigcommand.cpp:33 -msgid "Commands" -msgstr "Gohččumat" +#: kprinterimpl.cpp:325 +msgid "" +"

Unable to perform the requested page selection. The filter psselect " +"cannot be inserted in the current filter chain. See Filter " +"tab in the printer properties dialog for further information.

" +msgstr "" -#: management/kmconfigcommand.cpp:34 -msgid "Command Settings" -msgstr "Gohččunheivehusat" +#: kprinterimpl.cpp:355 +msgid "

Could not load filter description for %1.

" +msgstr "" -#: management/kmconfigcommand.cpp:37 -msgid "Edit/Create Commands" -msgstr "Ráhkat/rievdat gohččumiid" +#: kprinterimpl.cpp:371 +msgid "" +"

Error while reading filter description for %1" +". Empty command line received.

" +msgstr "" -#: management/kmconfigcommand.cpp:39 +#: kprinterimpl.cpp:385 msgid "" -"

Command objects perform a conversion from input to output." -"
They are used as the basis to build both print filters and special " -"printers. They are described by a command string, a set of options, a set of " -"requirements and associated mime types. Here you can create new command objects " -"and edit existing ones. All changes will only be effective for you." +"The MIME type %1 is not supported as input of the filter chain (this may happen " +"with non-CUPS spoolers when performing page selection on a non-PostScript " +"file). Do you want TDE to convert the file to a supported format?

" msgstr "" -#: management/kmwizard.cpp:64 management/kmwizard.cpp:209 -msgid "&Next >" -msgstr "Č&uovvovaš >" +#: kprinterimpl.cpp:389 kprinterimpl.cpp:509 +msgid "Convert" +msgstr "Konvertere" -#: management/kmwizard.cpp:66 -msgid "< &Back" -msgstr "< &Ovddit" +#: kprinterimpl.cpp:399 +msgid "Select MIME Type" +msgstr "Vállje MIME-šlája" -#: management/kmwizard.cpp:131 management/kmwizard.cpp:166 -#: management/kmwizard.cpp:191 -msgid "Add Printer Wizard" -msgstr "Čálánsajáiduhttin ofelaš" +#: kprinterimpl.cpp:400 +msgid "Select the target format for the conversion:" +msgstr "" -#: management/kmwizard.cpp:166 -msgid "Modify Printer" -msgstr "Rievdat čálána" +#: kprinterimpl.cpp:404 kprinterimpl.cpp:430 +msgid "Operation aborted." +msgstr "Bargu gaskkalduhttojuvvon." -#: management/kmwizard.cpp:191 -msgid "Unable to find the requested page." -msgstr "Ii gávnna jearahuvvon siiddu." +#: kprinterimpl.cpp:410 +msgid "No appropriate filter found. Select another target format." +msgstr "" -#: management/kmwizard.cpp:207 management/kmwizard.cpp:234 -msgid "&Finish" -msgstr "&Heaittit" +#: kprinterimpl.cpp:423 +msgid "" +"Operation failed with message:" +"
%1" +"
Select another target format." +msgstr "" -#: management/tdeprint_management_module.cpp:48 -msgid "Select Command" -msgstr "Vállje gohččun" +#: kprinterimpl.cpp:441 +msgid "Filtering print data" +msgstr "Sillemin čálihandáhta" -#: management/kmwlocal.cpp:38 -msgid "Local Port Selection" -msgstr "Vállje báikkálaš verráha" +#: kprinterimpl.cpp:445 +msgid "Error while filtering. Command was: %1." +msgstr "" -#: management/kmwlocal.cpp:50 -msgid "Local System" -msgstr "Báikkálaš vuogádat" +#: kprinterimpl.cpp:487 +msgid "The print file is empty and will be ignored:

%1

" +msgstr "" -#: management/kmwlocal.cpp:57 -msgid "Parallel" -msgstr "Bálddalas" +#: kprinterimpl.cpp:497 +msgid "" +"The file format %1 is not directly supported by the current " +"print system. You now have 3 options: " +"
    " +"
  • TDE can attempt to convert this file automatically to a supported format. " +"(Select Convert)
    • " +"
  • You can try to send the file to the printer without any conversion. " +"(Select Keep)
    • " +"
  • You can cancel the printjob. (Select Cancel)
" +"Do you want TDE to attempt and convert this file to %2?" +msgstr "" -#: management/kmwlocal.cpp:58 -msgid "Serial" -msgstr "Maŋŋálas" +#: kprinterimpl.cpp:510 management/kmwname.cpp:62 +msgid "Keep" +msgstr "Doalat" -#: management/kmwlocal.cpp:59 -msgid "USB" -msgstr "USB" +#: kprinterimpl.cpp:518 +msgid "" +"No appropriate filter was found to convert the file format %1 into %2." +"
" +"
    " +"
  • Go to System Options -> Commands to look through the list of " +"possible filters. Each filter executes an external program.
    • " +"
  • See if the required external program is available.on your system.
" +"" +msgstr "" -#: driver.cpp:389 management/kmwlocal.cpp:60 -msgid "Others" -msgstr "Earát" +#: tools/escputil/escpwidget.cpp:45 +msgid "EPSON InkJet Printer Utilities" +msgstr "EPSON-leahkkačálániid reaiddut" -#: management/kmwlocal.cpp:63 -msgid "" -"

Select a valid detected port, or enter directly the corresponding URI in the " -"bottom edit field.

" +#: tools/escputil/escpwidget.cpp:91 +msgid "&Use direct connection (might need root permissions)" msgstr "" -"

Vállje gustojeaddji verráha dahje čále URI:a njuolgga sisa teakstagieddái " -"dás vuolábealde.

" -#: management/kmwlocal.cpp:78 -msgid "" -"_: The URI is empty\n" -"Empty URI." -msgstr "Guorus URI." +#: management/kmwsmb.cpp:46 tools/escputil/escpwidget.cpp:99 +msgid "Printer:" +msgstr "Čálán:" + +#: management/kminfopage.cpp:54 management/kminfopage.cpp:93 +#: tools/escputil/escpwidget.cpp:101 +msgid "Device:" +msgstr "Ovttadat:" + +#: tools/escputil/escpwidget.cpp:103 +msgid "Clea&n print head" +msgstr "Čo&rge čálánoaivvi" -#: management/kmwlocal.cpp:83 -msgid "The local URI doesn't correspond to a detected port. Continue?" +#: tools/escputil/escpwidget.cpp:104 +msgid "&Print a nozzle test pattern" msgstr "" -#: management/kmwlocal.cpp:85 -msgid "Select a valid port." -msgstr "Vállje gustojeaddji verráha." +#: tools/escputil/escpwidget.cpp:105 +msgid "&Align print head" +msgstr "" -#: management/kmwlocal.cpp:166 -msgid "Unable to detect local ports." -msgstr "Ii gávnna báikkálaš verráhiid." +#: tools/escputil/escpwidget.cpp:106 +msgid "&Ink level" +msgstr "Leahkka&dássi" -#: management/kmpropbackend.cpp:34 -msgid "Printer type:" -msgstr "Čálánšládja:" +#: tools/escputil/escpwidget.cpp:107 +msgid "P&rinter identification" +msgstr "Čálán&identifikašuvdna" -#: management/kmpropbackend.cpp:48 -msgid "Interface" -msgstr "Lakta" +#: tools/escputil/escpwidget.cpp:153 +msgid "Internal error: no device set." +msgstr "Siskkildas meattáhus: ii leat ovttadat válljejuvvon." -#: management/kmpropbackend.cpp:49 -msgid "Interface Settings" -msgstr "Rámmaiešvuođat" +#: tools/escputil/escpwidget.cpp:164 +#, c-format +msgid "Unsupported connection type: %1" +msgstr "" -#: management/kmpropbackend.cpp:62 -msgid "IPP Printer" -msgstr "IPP-čálán" +#: tools/escputil/escpwidget.cpp:171 +msgid "" +"An escputil process is still running. You must wait until its completion before " +"continuing." +msgstr "" -#: management/kmpropbackend.cpp:63 -msgid "Local USB Printer" -msgstr "Báikkálaš USB-čálán" +#: tools/escputil/escpwidget.cpp:179 +msgid "" +"The executable escputil cannot be found in your PATH environment variable. Make " +"sure gimp-print is installed and that escputil is in your PATH." +msgstr "" -#: management/kmpropbackend.cpp:64 -msgid "Local Parallel Printer" -msgstr "Báikkálaš bálddalas čálán" +#: tools/escputil/escpwidget.cpp:204 +msgid "Internal error: unable to start escputil process." +msgstr "" -#: management/kmpropbackend.cpp:65 -msgid "Local Serial Printer" -msgstr "Báikkálaš maŋŋálas čálán" +#: tools/escputil/escpwidget.cpp:214 +msgid "Operation terminated with errors." +msgstr "" -#: management/kmpropbackend.cpp:66 -msgid "Network Printer (socket)" -msgstr "Fierpmádatčálán (socket)" +#: kpfilterpage.cpp:409 tools/escputil/escpwidget.cpp:217 +msgid "Output" +msgstr "Olggos" -#: management/kmpropbackend.cpp:67 -msgid "SMB printers (Windows)" -msgstr "SMB-čálánat (Windows)" +#: kprintaction.cpp:117 kprintaction.cpp:122 kprintaction.cpp:127 +msgid "&Export..." +msgstr "&Olggosfievrrit …" -#: management/kmpropbackend.cpp:69 -msgid "File printer" -msgstr "Fiilačálán" +#: driver.cpp:385 foomatic2loader.cpp:268 +msgid "Adjustments" +msgstr "" -#: management/kmpropbackend.cpp:70 -msgid "Serial Fax/Modem printer" -msgstr "Maŋŋálas fáksa/modem-čálán" +#: kmprinter.cpp:144 +msgid "(rejecting jobs)" +msgstr "(hilgo bargguid)" -#: management/kmpropbackend.cpp:71 -msgid "" -"_: Unknown Protocol\n" -"Unknown" -msgstr "Amas" +#: kmprinter.cpp:144 +msgid "(accepting jobs)" +msgstr "(dohkkeha bargguid)" -#: management/kminfopage.cpp:44 management/kmpropgeneral.cpp:38 +#: management/kmmainview.cpp:72 msgid "" -"_: Physical Location\n" -"Location:" -msgstr "Báiki:" - -#: management/kminfopage.cpp:46 management/kmpropgeneral.cpp:39 -#: management/kmwname.cpp:41 -msgid "Description:" -msgstr "Válddahus:" - -#: management/kminfopage.cpp:56 -msgid "Model:" -msgstr "Málle:" - -#: management/kminfopage.cpp:92 -msgid "Members:" -msgstr "Miellahtut:" +"The printer %1 already exists. Continuing will overwrite existing printer. Do " +"you want to continue?" +msgstr "" +"Čálán %1 gávdno juo. Jos joatkkát de buhttet boares čálána. Halidatgo joatkit?" -#: management/kminfopage.cpp:112 -msgid "Implicit class" -msgstr "Implisitta luohkát" +#: management/kmmainview.cpp:133 management/kmmainview.cpp:783 +#: management/kmmainview.cpp:859 management/kmmainview.cpp:883 +msgid "Initializing manager..." +msgstr "Válbmemin gieđahalli …" -#: management/kminfopage.cpp:114 -msgid "Remote class" -msgstr "Gáiddus luohkká" +#: management/kmmainview.cpp:180 +msgid "&Icons,&List,&Tree" +msgstr "&Govažat,&Listu,&Muorra" -#: management/kminfopage.cpp:115 -msgid "Local class" -msgstr "Báikkálaš luohkká" +#: management/kmmainview.cpp:184 +msgid "Start/Stop Printer" +msgstr "Bija johtui/bisset čálána" -#: management/kminfopage.cpp:117 -msgid "Remote printer" -msgstr "Gáiddus čálán" +#: management/kmmainview.cpp:186 +msgid "&Start Printer" +msgstr "&Bija čálána johtui" -#: lpdunix/kmlpdunixmanager.cpp:222 lpdunix/kmlpdunixmanager.cpp:274 -#: lpdunix/kmlpdunixmanager.cpp:320 lpdunix/kmlpdunixmanager.cpp:342 -#: lpdunix/kmlpdunixmanager.cpp:382 management/kminfopage.cpp:118 -msgid "Local printer" -msgstr "Báikkálaš čálán" +#: management/kmmainview.cpp:187 +msgid "Sto&p Printer" +msgstr "Bi&sset čálána" -#: management/kminfopage.cpp:120 -msgid "Special (pseudo) printer" -msgstr "Erenoamáš (pseudo)čálán" +#: management/kmmainview.cpp:189 +msgid "Enable/Disable Job Spooling" +msgstr "" -#: management/kminfopage.cpp:121 -msgid "" -"_: Unknown class of printer\n" -"Unknown" -msgstr "Amas" +#: management/kmmainview.cpp:191 +msgid "&Enable Job Spooling" +msgstr "" -#: management/kmwclass.cpp:37 -msgid "Class Composition" -msgstr "Luohkkáčohkkehus" +#: management/kmmainview.cpp:192 +msgid "&Disable Job Spooling" +msgstr "" -#: management/kmwclass.cpp:52 -msgid "Available printers:" -msgstr "Olamuttus čálánat:" +#: management/kmmainview.cpp:195 +msgid "&Configure..." +msgstr "&Heivet …" -#: management/kmwclass.cpp:53 -msgid "Class printers:" -msgstr "Luohkkáčálánat:" +#: management/kmmainview.cpp:196 +msgid "Add &Printer/Class..." +msgstr "Lasit čálána/&luohká …" -#: management/kmwclass.cpp:79 -msgid "You must select at least one printer." -msgstr "Fertet válljet unnimus ovtta čálána." +#: management/kmmainview.cpp:197 +msgid "Add &Special (pseudo) Printer..." +msgstr "Lasit erenomáš (pseudo)čálána …" -#: management/kmpropgeneral.cpp:37 -msgid "Printer name:" -msgstr "Čálánnamma:" +#: management/kmmainview.cpp:198 +msgid "Set as &Local Default" +msgstr "Geavat báikkálaš &standárdan" -#: management/kmconfiggeneral.cpp:45 management/kmpropgeneral.cpp:55 -msgid "General Settings" -msgstr "Oppalaš heivehusat" +#: management/kmmainview.cpp:199 +msgid "Set as &User Default" +msgstr "Geavat standárdan &geavaheddjiide" -#: management/networkscanner.cpp:104 management/networkscanner.cpp:184 -msgid "Sc&an" -msgstr "O&za" +#: management/kmmainview.cpp:200 +msgid "&Test Printer..." +msgstr "&Geahččal čálána …" -#: management/networkscanner.cpp:111 -msgid "Network scan:" -msgstr "Oza fierpmádagas:" +#: management/kmmainview.cpp:201 +msgid "Configure &Manager..." +msgstr "H&eivet gieđahalli …" -#: management/networkscanner.cpp:112 management/networkscanner.cpp:299 -#: management/networkscanner.cpp:310 -#, c-format -msgid "Subnet: %1" -msgstr "Vuollefierpmádat: %1" +#: management/kmmainview.cpp:202 +msgid "Initialize Manager/&View" +msgstr "Válbme &gieđahalli/čájeheami" -#: management/networkscanner.cpp:161 -msgid "" -"You are about to scan a subnet (%1.*) that does not correspond to the current " -"subnet of this computer (%2.*). Do you want to scan the specified subnet " -"anyway?" +#: management/kmmainview.cpp:204 +msgid "&Orientation" msgstr "" -#: management/networkscanner.cpp:164 -msgid "&Scan" -msgstr "O&za" +#: management/kmmainview.cpp:207 +msgid "&Vertical,&Horizontal" +msgstr "&Ceaggu,&Veallu" -#: management/kmwsocketutil.cpp:52 management/networkscanner.cpp:338 -msgid "&Subnetwork:" -msgstr "&Vuollefierpmádat:" +#: management/kmmainview.cpp:211 +msgid "R&estart Server" +msgstr "Álggat &bálvá ođđasit" -#: management/kmwsocketutil.cpp:54 management/networkscanner.cpp:340 -msgid "&Timeout (ms):" -msgstr "Áige&mearri (ms):" +#: management/kmmainview.cpp:212 +msgid "Configure &Server..." +msgstr "Heivet &bálvá …" -#: management/kmwsocketutil.cpp:92 management/networkscanner.cpp:378 -msgid "Scan Configuration" -msgstr "Loga heivehusa" +#: management/kmmainview.cpp:213 +#, fuzzy +msgid "Configure Server Access..." +msgstr "Heivet &bálvá …" -#: management/kmwsocketutil.cpp:104 management/kmwsocketutil.cpp:110 -#: management/networkscanner.cpp:390 management/networkscanner.cpp:396 -msgid "Wrong subnetwork specification." -msgstr "" +#: management/kmmainview.cpp:216 +msgid "Hide &Toolbar" +msgstr "Čiega &reaidolinnjá" -#: management/kmwsocketutil.cpp:118 management/networkscanner.cpp:404 -msgid "Wrong timeout specification." -msgstr "Boastolágán áigemearri meroštus." +#: management/kmmainview.cpp:218 +msgid "Show Me&nu Toolbar" +msgstr "Čájet &fálloreaidolinnjá" -#: management/kmwsocketutil.cpp:121 management/networkscanner.cpp:407 -msgid "Wrong port specification." -msgstr "Boastolágán verrát meroštus." +#: management/kmmainview.cpp:219 +msgid "Hide Me&nu Toolbar" +msgstr "Čiega &fálloreaidoholga" -#: management/kmdriverdialog.cpp:48 -msgid "" -"Some options are in conflict. You must resolve those conflicts before " -"continuing." -msgstr "" -"Muhton molssaeavttut eai heive oktii. Fertet čoavdit dáid váttisvuođaid ovdal " -"go joatkkát." +#: management/kmmainview.cpp:221 +msgid "Show Pr&inter Details" +msgstr "Čáj&et čálánbienaid" -#: management/kmwfile.cpp:35 -msgid "File Selection" -msgstr "Vállje fiilla" +#: management/kmmainview.cpp:222 +msgid "Hide Pr&inter Details" +msgstr "Č&iega čálánbienaid" -#: management/kmwfile.cpp:41 -msgid "" -"

The printing will be redirected to a file. Enter here the path of the file " -"you want to use for redirection. Use an absolute path or the browse button for " -"graphical selection.

" +#: management/kmmainview.cpp:226 +msgid "Toggle Printer &Filtering" msgstr "" -"

Čálus sáddejuvvo fiilii. Čális bálgá gosa háliidat ahte fiila ráhkaduvvo. " -"Geavat absoluhtta bálgá vai vállje gosa bijat dan Bláđđe …-boalu.

" -#: management/kmwfile.cpp:44 -msgid "Print to file:" -msgstr "Čálit fiilii:" +#: management/kmmainview.cpp:230 +msgid "Pri&nter Tools" +msgstr "Čá&lánreaiddut" -#: management/kmconfiggeneral.cpp:137 management/kmwfile.cpp:60 -msgid "Empty file name." -msgstr "Guorus fiilanamma." +#: management/kmmainview.cpp:295 +msgid "Print Server" +msgstr "Čálánbálvá" -#: management/kmwfile.cpp:66 -msgid "Directory does not exist." -msgstr "Máhppa ii gávdno." +#: management/kmmainview.cpp:301 +msgid "Print Manager" +msgstr "Čálihangieđahalli" -#: management/kmconfigpreview.cpp:35 -msgid "Preview" -msgstr "Ovdačájeheapmi" +#: management/kmmainview.cpp:334 +msgid "An error occurred while retrieving the printer list." +msgstr "Meattáhus dáhpáhuvai vieččadettiin čálinlisttu." -#: management/kmconfigpreview.cpp:36 -msgid "Preview Settings" -msgstr "Ovdačájeheami heivehusat" +#: management/kmmainview.cpp:511 +#, c-format +msgid "Unable to modify the state of printer %1." +msgstr "Ii sáhte rievdadit čálándili %1." -#: management/kmconfigpreview.cpp:39 -msgid "Preview Program" -msgstr "Prográmma mii geavahuvvo ovdačájeheapmái" +#: management/kmmainview.cpp:522 +msgid "Do you really want to remove %1?" +msgstr "Háliidatgo duođas váldit %1 eret?" -#: management/kmconfigpreview.cpp:41 -msgid "&Use external preview program" -msgstr "&Geavat olgguldas prográmma ovdačájeheapmái" +#: management/kmmainview.cpp:526 +#, c-format +msgid "Unable to remove special printer %1." +msgstr "Ii sáhte váldit erenoamáščálána %1 eret." -#: management/kmconfigpreview.cpp:44 -msgid "" -"You can use an external preview program (PS viewer) instead of the TDE built-in " -"preview system. Note that if the TDE default PS viewer (KGhostView) cannot be " -"found, TDE tries automatically to find another external PostScript viewer" -msgstr "" +#: management/kmmainview.cpp:529 +#, c-format +msgid "Unable to remove printer %1." +msgstr "Ii sáhte váldit čálána %1 eret." -#: management/kmwdrivertest.cpp:41 -msgid "Printer Test" -msgstr "Čálángeahččaleapmi" +#: management/kmmainview.cpp:559 +#, c-format +msgid "Configure %1" +msgstr "Heivet %1" -#: management/kmwdrivertest.cpp:51 -msgid "Manufacturer:" -msgstr "Buvttadeaddji:" +#: management/kmmainview.cpp:566 +#, c-format +msgid "Unable to modify settings of printer %1." +msgstr "Ii sáhte rievdadit čálánheivehusat %1 várás." -#: management/kmwdrivertest.cpp:52 -msgid "Model:" -msgstr "Málle:" +#: management/kmmainview.cpp:570 +#, c-format +msgid "Unable to load a valid driver for printer %1." +msgstr "Ii sáhte viežžat gustojeaddji stivrrana %1 čálána várás." -#: management/kmwdrivertest.cpp:53 -msgid "Description:" -msgstr "Válddahus:" +#: management/kmmainview.cpp:582 +msgid "Unable to create printer." +msgstr "Ii sáhte ráhkadit čálána." -#: management/kmwdrivertest.cpp:55 -msgid "&Test" -msgstr "&Geahččal" +#: management/kmmainview.cpp:594 +msgid "Unable to define printer %1 as default." +msgstr "Ii sáhte meroštit čálána %1 standárdan." -#: management/kmwdrivertest.cpp:59 -msgid "" -"

Now you can test the printer before finishing installation. Use the " -"Settings button to configure the printer driver and the Test " -"button to test your configuration. Use the Back " -"button to change the driver (your current configuration will be discarded).

" -msgstr "" +#: management/kminstancepage.cpp:265 management/kmmainview.cpp:629 +msgid "You are about to print a test page on %1. Do you want to continue?" +msgstr "Don viggat čállit geahččalansiiddu %1 čálánis. Halidatgo joatkit?" -#: management/kmwdrivertest.cpp:117 -msgid "Unable to load the requested driver:

%1

" -msgstr "Ii sáhtte viežžat jearahuvvon stivrrana:

%1

" +#: management/kminstancepage.cpp:265 management/kmmainview.cpp:629 +msgid "Print Test Page" +msgstr "Čálit geahččalansiiddu" -#: management/kmwdrivertest.cpp:146 -msgid "" -"Test page successfully sent to printer. Wait until printing is complete, then " -"click the OK button." -msgstr "" -"Lihkostuvai sáddet geahččalansiiddu čálánii. Vuordde dassái go čálán lea " -"geargan, de coahkkal OK boalu." +#: management/kminstancepage.cpp:270 management/kmmainview.cpp:632 +#, c-format +msgid "Test page successfully sent to printer %1." +msgstr "Lihkostuvai sáddet geahččalansiiddu %1 čálánii." -#: management/kmwdrivertest.cpp:148 -msgid "Unable to test printer: " -msgstr "Ii sáhte geahččalit čálána: " +#: management/kmmainview.cpp:634 +#, c-format +msgid "Unable to test printer %1." +msgstr "Ii sáhte geahččalit %1 čálána." -#: management/kmwdrivertest.cpp:150 -msgid "Unable to remove temporary printer." -msgstr "Ii sáhte váldit gaskaboddosaš čálána eret." +#: management/kmmainview.cpp:647 +msgid "Error message received from manager:

%1

" +msgstr "Meattáhusdieđu gieđahallis:

%1

" -#: management/kmwdrivertest.cpp:153 -msgid "Unable to create temporary printer." -msgstr "Ii sáhte ráhkadit gaskaboddosaš čálána." +#: management/kmmainview.cpp:649 +msgid "Internal error (no error message)." +msgstr "Siskkildas meattáhus (ii leat meattáhusdieđu)" -#: management/kmpropwidget.cpp:50 -msgid "" -"Unable to change printer properties. Error received from manager:" -"

%1

" -msgstr "" -"Ii sáhte rievdadit čálániešvuođaid. Meattáhusdiehtu gieđahallis lei:" -"

%1

" +#: management/kmmainview.cpp:667 +msgid "Unable to restart print server." +msgstr "Ii sáhte álggahit čálihanbálvá ođđasit." -#: management/kaddprinterwizard.cpp:10 -msgid "Configure TDE Print" -msgstr "Heivet TDE-čáliheami" +#: management/kmmainview.cpp:672 +msgid "Restarting server..." +msgstr "Álggaheamen bálvá ođđasit … " -#: management/kaddprinterwizard.cpp:11 -msgid "Configure print server" -msgstr "Heivet čálánbálvá" +#: management/kmmainview.cpp:682 +msgid "Unable to configure print server." +msgstr "Ii sáhte heivehit čálihanbálvvá." -#: management/kaddprinterwizard.cpp:18 -msgid "Start the add printer wizard" -msgstr "Álggát ofelačča mii lasiha ođđa čálána" +#: management/kmmainview.cpp:687 +msgid "Configuring server..." +msgstr "Heiveheamen čálihanbálvva …" -#: management/kmdbcreator.cpp:92 +#: management/kmmainview.cpp:842 msgid "" -"No executable defined for the creation of the driver database. This operation " -"is not implemented." +"Unable to start printer tool. Possible reasons are: no printer selected, the " +"selected printer doesn't have any local device defined (printer port), or the " +"tool library could not be found." msgstr "" -#: management/kmdbcreator.cpp:95 -msgid "" -"The executable %1 could not be found in your PATH. Check that this program " -"exists and is accessible in your PATH variable." -msgstr "" -"Ii gávdnan prográmmafiilla %1 ohcanbálgás (PATH). Dárkkis ahte prográmma gávdno " -"ja lea olamuttus ohcanbálgás." +#: management/kmmainview.cpp:866 +msgid "Unable to retrieve the printer list." +msgstr "Ii sáhte viežžat čálánlisttu." -#: management/kmdbcreator.cpp:99 +#: management/kminfopage.cpp:44 management/kmpropgeneral.cpp:38 msgid "" -"Unable to start the creation of the driver database. The execution of %1 " -"failed." -msgstr "" +"_: Physical Location\n" +"Location:" +msgstr "Báiki:" -#: management/kmdbcreator.cpp:113 -msgid "Please wait while TDE rebuilds a driver database." -msgstr "Vuorddes dan bottago TDE hukse stivrrandiehtovuođu." +#: management/kminfopage.cpp:46 management/kmpropgeneral.cpp:39 +#: management/kmwname.cpp:41 +msgid "Description:" +msgstr "Válddahus:" -#: management/kmdbcreator.cpp:114 -msgid "Driver Database" -msgstr "Stivrrandiehtovuođđu" +#: management/kminfopage.cpp:56 +msgid "Model:" +msgstr "Málle:" -#: management/kmdbcreator.cpp:171 -msgid "" -"Error while creating driver database: abnormal child-process termination." -msgstr "" +#: management/kminfopage.cpp:92 +msgid "Members:" +msgstr "Miellahtut:" -#: management/kmwpassword.cpp:37 -msgid "User Identification" -msgstr "Geavaheaddjeidentifikašuvdna" +#: management/kminfopage.cpp:112 +msgid "Implicit class" +msgstr "Implisitta luohkát" -#: management/kmwpassword.cpp:43 -msgid "" -"

This backend may require a login/password to work properly. Select the type " -"of access to use and fill in the login and password entries if needed.

" -msgstr "" +#: management/kminfopage.cpp:114 +msgid "Remote class" +msgstr "Gáiddus luohkká" -#: management/kmwpassword.cpp:49 -msgid "&Login:" -msgstr "&Geavaheaddjinamma:" +#: management/kminfopage.cpp:115 +msgid "Local class" +msgstr "Báikkálaš luohkká" -#: management/kmwpassword.cpp:53 -msgid "&Anonymous (no login/password)" -msgstr "" +#: management/kminfopage.cpp:117 +msgid "Remote printer" +msgstr "Gáiddus čálán" -#: management/kmwpassword.cpp:54 -msgid "&Guest account (login=\"guest\")" -msgstr "&Guossekontu (geavaheaddjinamma «guest»)" +#: lpdunix/kmlpdunixmanager.cpp:222 lpdunix/kmlpdunixmanager.cpp:274 +#: lpdunix/kmlpdunixmanager.cpp:320 lpdunix/kmlpdunixmanager.cpp:342 +#: lpdunix/kmlpdunixmanager.cpp:382 management/kminfopage.cpp:118 +msgid "Local printer" +msgstr "Báikkálaš čálán" -#: management/kmwpassword.cpp:55 -msgid "Nor&mal account" -msgstr "&Dábálaš kontu" +#: management/kminfopage.cpp:120 +msgid "Special (pseudo) printer" +msgstr "Erenoamáš (pseudo)čálán" + +#: management/kminfopage.cpp:121 +msgid "" +"_: Unknown class of printer\n" +"Unknown" +msgstr "Amas" -#: management/kmwpassword.cpp:88 -msgid "Select one option" -msgstr "Vállje ovtta molssaeavttu." +#: management/kmpropcontainer.cpp:35 +msgid "Change..." +msgstr "Rievdat …" -#: management/kmwpassword.cpp:90 -msgid "User name is empty." -msgstr "Geavaheaddjenamma lea guorus." +#: management/kmwdrivertest.cpp:41 +msgid "Printer Test" +msgstr "Čálángeahččaleapmi" -#: management/kmwsocket.cpp:38 -msgid "Network Printer Information" -msgstr "Dieđut fierpmádatčálána birra" +#: management/kmwdrivertest.cpp:51 +msgid "Manufacturer:" +msgstr "Buvttadeaddji:" -#: management/kmwsocket.cpp:48 -msgid "&Printer address:" -msgstr "Čá&lánčujuhus:" +#: management/kmwdrivertest.cpp:52 +msgid "Model:" +msgstr "Málle:" -#: management/kmwsocket.cpp:49 -msgid "P&ort:" -msgstr "&Verrát:" +#: management/kmwdrivertest.cpp:53 +msgid "Description:" +msgstr "Válddahus:" -#: management/kmwsocket.cpp:98 -msgid "You must enter a printer address." -msgstr "Fertet addit čálánčujuhusa." +#: management/kmwdrivertest.cpp:55 +msgid "&Test" +msgstr "&Geahččal" -#: management/kmwsocket.cpp:109 -msgid "Wrong port number." -msgstr "Boastu verrátnummir." +#: management/kmwdrivertest.cpp:59 +msgid "" +"

Now you can test the printer before finishing installation. Use the " +"Settings button to configure the printer driver and the Test " +"button to test your configuration. Use the Back " +"button to change the driver (your current configuration will be discarded).

" +msgstr "" -#: management/kmpropcontainer.cpp:35 -msgid "Change..." -msgstr "Rievdat …" +#: management/kmwdrivertest.cpp:117 +msgid "Unable to load the requested driver:

%1

" +msgstr "Ii sáhtte viežžat jearahuvvon stivrrana:

%1

" -#: management/kmconfigdialog.cpp:38 -msgid "TDE Print Configuration" -msgstr "Heivet čáliheami TDE:as" +#: management/kmwdrivertest.cpp:146 +msgid "" +"Test page successfully sent to printer. Wait until printing is complete, then " +"click the OK button." +msgstr "" +"Lihkostuvai sáddet geahččalansiiddu čálánii. Vuordde dassái go čálán lea " +"geargan, de coahkkal OK boalu." -#: management/kmwdriver.cpp:33 -msgid "Printer Model Selection" -msgstr "Vállje čálánmálle" +#: management/kmwdrivertest.cpp:148 +msgid "Unable to test printer: " +msgstr "Ii sáhte geahččalit čálána: " -#: management/kmwdriver.cpp:80 management/kmwend.cpp:106 -#: management/kmwname.cpp:83 -msgid "Raw printer" -msgstr "Oktageardánis čálán" +#: management/kmwdrivertest.cpp:150 +msgid "Unable to remove temporary printer." +msgstr "Ii sáhte váldit gaskaboddosaš čálána eret." -#: management/kmwdriver.cpp:113 -msgid "Internal error: unable to locate the driver." -msgstr "Siskkildas meattáhus: ii gávnna stivrrana." +#: management/kmwdrivertest.cpp:153 +msgid "Unable to create temporary printer." +msgstr "Ii sáhte ráhkadit gaskaboddosaš čálána." #: management/kmjobviewer.cpp:101 management/kmjobviewer.cpp:158 msgid "No Printer" @@ -3318,503 +3061,590 @@ msgstr "Bargu filtii." msgid "Print Job Settings" msgstr "Čálihanbarggu heivehusat" -#: management/kmconfiggeneral.cpp:48 -msgid "Refresh Interval" -msgstr "Ođasmahttingaskkadat" +#: management/kmconfigcommand.cpp:33 +msgid "Commands" +msgstr "Gohččumat" -#: management/kmconfiggeneral.cpp:51 -msgid " sec" -msgstr " s" +#: management/kmconfigcommand.cpp:34 +msgid "Command Settings" +msgstr "Gohččunheivehusat" -#: management/kmconfiggeneral.cpp:53 +#: management/kmconfigcommand.cpp:37 +msgid "Edit/Create Commands" +msgstr "Ráhkat/rievdat gohččumiid" + +#: management/kmconfigcommand.cpp:39 msgid "" -"This time setting controls the refresh rate of various TDE Print " -"components like the print manager and the job viewer." +"

Command objects perform a conversion from input to output." +"
They are used as the basis to build both print filters and special " +"printers. They are described by a command string, a set of options, a set of " +"requirements and associated mime types. Here you can create new command objects " +"and edit existing ones. All changes will only be effective for you." msgstr "" -#: management/kmconfiggeneral.cpp:57 -msgid "Test Page" -msgstr "Geahččalansiidu" +#: management/tdeprint_management_module.cpp:48 +msgid "Select Command" +msgstr "Vállje gohččun" -#: management/kmconfiggeneral.cpp:58 -msgid "&Specify personal test page" -msgstr "&Vállje iežat geahččalansiiddu" +#: management/kmwbackend.cpp:54 +msgid "Backend Selection" +msgstr "Vállje duogáščoavddus" -#: management/kmconfiggeneral.cpp:60 -msgid "Preview..." -msgstr "Ovdačájeheapmi …" +#: management/kmwbackend.cpp:68 +msgid "You must select a backend." +msgstr "Fertet válljet duogáščoavdusa." -#: management/kmconfiggeneral.cpp:70 -msgid "Sho&w printing status message box" -msgstr "" +#: management/kmwbackend.cpp:115 +msgid "&Local printer (parallel, serial, USB)" +msgstr "&Báikkálaš čálán (bálddalas, maŋŋálas, USB)" -#: management/kmconfiggeneral.cpp:71 -msgid "De&faults to the last printer used in the application" +#: management/kmwbackend.cpp:116 +msgid "" +"" +"

Locally-connected printer

" +"

Use this for a printer connected to the computer via a parallel, serial or " +"USB port.

" msgstr "" -#: management/kmconfiggeneral.cpp:127 +#: management/kmwbackend.cpp:122 +msgid "&SMB shared printer (Windows)" +msgstr "&SMB-juohkojuvvon čálán (Windows)" + +#: management/kmwbackend.cpp:123 msgid "" -"The selected test page is not a PostScript file. You may not be able to test " -"your printer anymore." +"" +"

Shared Windows printer

" +"

Use this for a printer installed on a Windows server and shared on the " +"network using the SMB protocol (samba).

" msgstr "" -"Válljejuvvon geahččalansiidu ii leat PostScript-fiila. It dáidde sáhttit čálána " -"šat geahččalit." -#: management/smbview.cpp:44 -msgid "Comment" -msgstr "Kommeanta" - -#: management/kmwend.cpp:33 -msgid "Confirmation" -msgstr "Nannen" +#: management/kmwbackend.cpp:130 +msgid "&Remote LPD queue" +msgstr "&Gáiddus LPD-gárgadas" -#: tdefilelist.cpp:102 management/kmwend.cpp:50 management/kmwend.cpp:106 -#: management/kmwend.cpp:109 -msgid "Type" -msgstr "Šládja" +#: management/kmwbackend.cpp:131 +msgid "" +"" +"

Print queue on a remote LPD server

" +"

Use this for a print queue existing on a remote machine running a LPD print " +"server.

" +msgstr "" -#: management/kmwend.cpp:52 -msgid "Location" -msgstr "Čujuhus" +#: management/kmwbackend.cpp:137 +msgid "Ne&twork printer (TCP)" +msgstr "Fier&pmádatčálán (TCP)" -#: management/kmwend.cpp:53 management/kmwend.cpp:112 -#: management/kxmlcommanddlg.cpp:142 management/kxmlcommanddlg.cpp:545 -msgid "Description" -msgstr "Válddahus" +#: management/kmwbackend.cpp:138 +msgid "" +"" +"

Network TCP printer

" +"

Use this for a network-enabled printer using TCP (usually on port 9100) as " +"communication protocol. Most network printers can use this mode.

" +msgstr "" -#: management/kmpropmembers.cpp:39 management/kmwend.cpp:59 -msgid "Members" -msgstr "Miellahtut" +#: management/kmwfile.cpp:35 +msgid "File Selection" +msgstr "Vállje fiilla" -#: management/kmwend.cpp:69 -msgid "Backend" +#: management/kmwfile.cpp:41 +msgid "" +"

The printing will be redirected to a file. Enter here the path of the file " +"you want to use for redirection. Use an absolute path or the browse button for " +"graphical selection.

" msgstr "" +"

Čálus sáddejuvvo fiilii. Čális bálgá gosa háliidat ahte fiila ráhkaduvvo. " +"Geavat absoluhtta bálgá vai vállje gosa bijat dan Bláđđe …-boalu.

" -#: management/kmwend.cpp:74 -msgid "Device" -msgstr "Ovttadat" - -#: management/kmwend.cpp:77 -msgid "Printer IP" -msgstr "Čálán-IP" +#: management/kmwfile.cpp:44 +msgid "Print to file:" +msgstr "Čálit fiilii:" -#: management/kmwend.cpp:78 management/kmwend.cpp:89 -msgid "Port" -msgstr "Verrát" +#: management/kmconfiggeneral.cpp:137 management/kmwfile.cpp:60 +msgid "Empty file name." +msgstr "Guorus fiilanamma." -#: management/kmwend.cpp:81 management/kmwend.cpp:88 -msgid "Host" -msgstr "Guossoheaddji" +#: management/kmwfile.cpp:66 +msgid "Directory does not exist." +msgstr "Máhppa ii gávdno." -#: management/kmwend.cpp:91 -msgid "Account" -msgstr "Kontu" +#: management/kmdriverdbwidget.cpp:51 +msgid "&PostScript printer" +msgstr "&PostScript-čálán" -#: management/kmwend.cpp:96 -msgid "URI" -msgstr "URI" +#: management/kmdriverdbwidget.cpp:52 +msgid "&Raw printer (no driver needed)" +msgstr "" -#: management/kmwend.cpp:109 -msgid "DB driver" -msgstr "DV-stivrran" +#: management/kmdriverdbwidget.cpp:55 +msgid "&Other..." +msgstr "&Eará …" -#: management/kmwend.cpp:109 -msgid "External driver" -msgstr "Olgguldas stivrran" +#: management/kmdriverdbwidget.cpp:56 +msgid "&Manufacturer:" +msgstr "&Buvttadeaddji:" -#: management/kmwend.cpp:110 -msgid "Manufacturer" -msgstr "Buvttadeaddji" +#: management/kmdriverdbwidget.cpp:57 +msgid "Mo&del:" +msgstr "Má&lle:" -#: management/kmwend.cpp:111 -msgid "Model" -msgstr "Modealla" +#: management/kmdriverdbwidget.cpp:157 management/kmdriverdbwidget.cpp:166 +msgid "Loading..." +msgstr "Viežžamin …" -#: management/kmconfigfonts.cpp:43 -msgid "Font Settings" -msgstr "Fontaheivehusat" +#: management/kmdriverdbwidget.cpp:217 +msgid "Unable to find the PostScript driver." +msgstr "Ii gávnna PostScript-stivrrana." -#: management/kmconfigfonts.cpp:46 -msgid "Fonts Embedding" -msgstr "Vuojut fonttaid" +#: management/kmdriverdbwidget.cpp:230 +msgid "Select Driver" +msgstr "Vállje stivrrana" -#: management/kmconfigfonts.cpp:47 -msgid "Fonts Path" -msgstr "Fontabálggis" +#: management/kmdriverdbwidget.cpp:247 management/kmdriverdbwidget.cpp:249 +msgid "" +msgstr "" -#: management/kmconfigfonts.cpp:49 -msgid "&Embed fonts in PostScript data when printing" -msgstr "&Vuojut fonttaid PostScript-dáhtaide čálihettiin" +#: management/kmdriverdbwidget.cpp:252 +msgid "Database" +msgstr "Diehtovuođđu" -#: management/kmconfigfonts.cpp:57 -msgid "&Up" -msgstr "&Bajás" +#: management/kmdriverdbwidget.cpp:259 +msgid "Wrong driver format." +msgstr "Boasto stivrranformáhtta." -#: management/kmconfigfonts.cpp:58 -msgid "&Down" -msgstr "&Vulos" +#: management/kmdriverdbwidget.cpp:268 +msgid "Other" +msgstr "Eará" -#: management/kmconfigfonts.cpp:59 -msgid "&Add" -msgstr "&Lasit" +#: management/networkscanner.cpp:104 management/networkscanner.cpp:184 +msgid "Sc&an" +msgstr "O&za" -#: management/kmconfigfonts.cpp:61 -msgid "Additional director&y:" -msgstr "&Liigeohcu:" +#: management/networkscanner.cpp:111 +msgid "Network scan:" +msgstr "Oza fierpmádagas:" -#: management/kmconfigfonts.cpp:85 -msgid "" -"These options will automatically put fonts in the PostScript file which are not " -"present on the printer. Font embedding usually produces better print results " -"(closer to what you see on the screen), but larger print data as well." -msgstr "" +#: management/networkscanner.cpp:112 management/networkscanner.cpp:299 +#: management/networkscanner.cpp:310 +#, c-format +msgid "Subnet: %1" +msgstr "Vuollefierpmádat: %1" -#: management/kmconfigfonts.cpp:89 +#: management/networkscanner.cpp:161 msgid "" -"When using font embedding you can select additional directories where TDE " -"should search for embeddable font files. By default, the X server font path is " -"used, so adding those directories is not needed. The default search path should " -"be sufficient in most cases." +"You are about to scan a subnet (%1.*) that does not correspond to the current " +"subnet of this computer (%2.*). Do you want to scan the specified subnet " +"anyway?" msgstr "" -#: management/kmwsmb.cpp:35 -msgid "SMB Printer Settings" -msgstr "SMB-čálánheivehusat" +#: management/networkscanner.cpp:164 +msgid "&Scan" +msgstr "O&za" -#: management/kmwsmb.cpp:41 -msgid "Scan" -msgstr "Oza" +#: management/kmwsocketutil.cpp:52 management/networkscanner.cpp:338 +msgid "&Subnetwork:" +msgstr "&Vuollefierpmádat:" -#: management/kmwsmb.cpp:42 -msgid "Abort" -msgstr "Gaskkalduhte" +#: management/kmwsocketutil.cpp:54 management/networkscanner.cpp:340 +msgid "&Timeout (ms):" +msgstr "Áige&mearri (ms):" -#: management/kmwsmb.cpp:44 -msgid "Workgroup:" -msgstr "Bargojoavku:" +#: management/kmwsocketutil.cpp:92 management/networkscanner.cpp:378 +msgid "Scan Configuration" +msgstr "Loga heivehusa" -#: management/kmwsmb.cpp:45 -msgid "Server:" -msgstr "Bálvá:" +#: management/kmwsocketutil.cpp:104 management/kmwsocketutil.cpp:110 +#: management/networkscanner.cpp:390 management/networkscanner.cpp:396 +msgid "Wrong subnetwork specification." +msgstr "" -#: management/kmwsmb.cpp:99 -#, c-format -msgid "Login: %1" -msgstr "Geavaheaddjinamma: %1" +#: management/kmwsocketutil.cpp:118 management/networkscanner.cpp:404 +msgid "Wrong timeout specification." +msgstr "Boastolágán áigemearri meroštus." -#: management/kmwsmb.cpp:99 -msgid "" -msgstr "" +#: management/kmwsocketutil.cpp:121 management/networkscanner.cpp:407 +msgid "Wrong port specification." +msgstr "Boastolágán verrát meroštus." -#: management/kmpropmembers.cpp:40 -msgid "Class Members" -msgstr "Luohkkámiellahtut" +#: management/kxmlcommandselector.cpp:54 +msgid "New command" +msgstr "Ođđa gohččun" -#: management/kxmlcommanddlg.cpp:108 -msgid "Integer" -msgstr "Čávdelohku" +#: management/kxmlcommandselector.cpp:55 +msgid "Edit command" +msgstr "Doaimmat gohččuma" -#: management/kxmlcommanddlg.cpp:109 -msgid "Float" -msgstr "Desimálaárvu" +#: management/kxmlcommandselector.cpp:72 +msgid "&Browse..." +msgstr "&Bláđđe …" -#: management/kxmlcommanddlg.cpp:110 -msgid "List" -msgstr "Listu" +#: management/kxmlcommandselector.cpp:73 +msgid "Use co&mmand:" +msgstr "&Geavat gohččuma" -#: management/kmspecialprinterdlg.cpp:57 management/kxmlcommanddlg.cpp:115 -#: management/kxmlcommanddlg.cpp:866 -msgid "&Description:" -msgstr "&Válddahus:" +#: management/kxmlcommandselector.cpp:174 +msgid "Command Name" +msgstr "Gohččunnamma" -#: management/kmspecialprinterdlg.cpp:83 management/kxmlcommanddlg.cpp:116 -msgid "&Format:" -msgstr "&Formáhtta:" +#: management/kxmlcommandselector.cpp:174 +msgid "Enter an identification name for the new command:" +msgstr "" -#: management/kxmlcommanddlg.cpp:118 -msgid "Default &value:" -msgstr "&Standárdárvu:" +#: management/kxmlcommandselector.cpp:183 +msgid "" +"A command named %1 already exists. Do you want to continue and edit the " +"existing one?" +msgstr "" +"Gohččun nammaduvvon %1 gávdno juo. Háliidatgo joatkit ja doaimmahit boares " +"gohččuma?" -#: management/kxmlcommanddlg.cpp:119 -msgid "Co&mmand:" -msgstr "Go&hččun:" +#: management/kxmlcommandselector.cpp:220 +msgid "Internal error. The XML driver for the command %1 could not be found." +msgstr "Siskkildas meattáhus. Ii gávdnan XML-stivrrana %1 gohččuma várás." -#: management/kxmlcommanddlg.cpp:126 -msgid "&Persistent option" -msgstr "&Giddes molssaeavttut" +#: management/kxmlcommandselector.cpp:238 +msgid "output" +msgstr "" -#: management/kxmlcommanddlg.cpp:128 -msgid "Va&lues" -msgstr "Ár&vvut" +#: management/kxmlcommandselector.cpp:242 +msgid "undefined" +msgstr "ii meroštuvvon" -#: management/kxmlcommanddlg.cpp:136 -msgid "Minimum v&alue:" -msgstr "U&nnimus árvu:" +#: management/kxmlcommandselector.cpp:247 +msgid "not allowed" +msgstr "lobikeahttá" -#: management/kxmlcommanddlg.cpp:137 -msgid "Ma&ximum value:" -msgstr "S&tuorimus árvu:" +#: management/kxmlcommandselector.cpp:253 +msgid "(Unavailable: requirements not satisfied)" +msgstr "(Ii olamuttus: Gáibádusat eai leat ollašuvvon)" -#: management/kxmlcommanddlg.cpp:150 -msgid "Add value" -msgstr "Lasit árvvu" +#: management/kmconfigpreview.cpp:35 +msgid "Preview" +msgstr "Ovdačájeheapmi" -#: management/kxmlcommanddlg.cpp:151 -msgid "Delete value" -msgstr "Sihko árvvu" +#: management/kmconfigpreview.cpp:36 +msgid "Preview Settings" +msgstr "Ovdačájeheami heivehusat" -#: management/kxmlcommanddlg.cpp:153 -msgid "Apply changes" -msgstr "Bija rievdadusaid atnui" +#: management/kmconfigpreview.cpp:39 +msgid "Preview Program" +msgstr "Prográmma mii geavahuvvo ovdačájeheapmái" -#: management/kxmlcommanddlg.cpp:154 -msgid "Add group" -msgstr "Lasit joavkku" +#: management/kmconfigpreview.cpp:41 +msgid "&Use external preview program" +msgstr "&Geavat olgguldas prográmma ovdačájeheapmái" -#: management/kxmlcommanddlg.cpp:155 -msgid "Add option" -msgstr "Lasit molssaeavttu" +#: management/kmconfigpreview.cpp:44 +msgid "" +"You can use an external preview program (PS viewer) instead of the TDE built-in " +"preview system. Note that if the TDE default PS viewer (KGhostView) cannot be " +"found, TDE tries automatically to find another external PostScript viewer" +msgstr "" -#: management/kxmlcommanddlg.cpp:156 -msgid "Delete item" -msgstr "Sihko merkoša" +#: management/kmwclass.cpp:37 +msgid "Class Composition" +msgstr "Luohkkáčohkkehus" -#: tdefilelist.cpp:135 management/kxmlcommanddlg.cpp:157 -msgid "Move up" -msgstr "Sirdde bajás" +#: management/kmwclass.cpp:52 +msgid "Available printers:" +msgstr "Olamuttus čálánat:" -#: tdefilelist.cpp:142 management/kxmlcommanddlg.cpp:158 -msgid "Move down" -msgstr "Sirdde vulos" +#: management/kmwclass.cpp:53 +msgid "Class printers:" +msgstr "Luohkkáčálánat:" -#: management/kxmlcommanddlg.cpp:162 -msgid "&Input From" -msgstr "&Sisadáhtaid dás" +#: management/kmwclass.cpp:79 +msgid "You must select at least one printer." +msgstr "Fertet válljet unnimus ovtta čálána." + +#: management/kmpropmembers.cpp:39 management/kmwend.cpp:59 +msgid "Members" +msgstr "Miellahtut" + +#: management/kmpropmembers.cpp:40 +msgid "Class Members" +msgstr "Luohkkámiellahtut" -#: management/kxmlcommanddlg.cpp:163 -msgid "O&utput To" -msgstr "O&lggosdáhtáid deikke" +#: management/kaddprinterwizard.cpp:10 +msgid "Configure TDE Print" +msgstr "Heivet TDE-čáliheami" -#: management/kxmlcommanddlg.cpp:164 management/kxmlcommanddlg.cpp:166 -msgid "File:" -msgstr "Fiila:" +#: management/kaddprinterwizard.cpp:11 +msgid "Configure print server" +msgstr "Heivet čálánbálvá" -#: management/kxmlcommanddlg.cpp:165 management/kxmlcommanddlg.cpp:167 -msgid "Pipe:" -msgstr "Bohcit:" +#: management/kaddprinterwizard.cpp:18 +msgid "Start the add printer wizard" +msgstr "Álggát ofelačča mii lasiha ođđa čálána" -#: management/kxmlcommanddlg.cpp:285 +#: management/kmpropwidget.cpp:50 msgid "" -"An identification string. Use only alphanumeric characters except spaces. The " -"string __root__ is reserved for internal use." +"Unable to change printer properties. Error received from manager:" +"

%1

" msgstr "" +"Ii sáhte rievdadit čálániešvuođaid. Meattáhusdiehtu gieđahallis lei:" +"

%1

" -#: management/kxmlcommanddlg.cpp:289 +#: management/kmdbcreator.cpp:92 msgid "" -"A description string. This string is shown in the interface, and should be " -"explicit enough about the role of the corresponding option." +"No executable defined for the creation of the driver database. This operation " +"is not implemented." msgstr "" -#: management/kxmlcommanddlg.cpp:293 +#: management/kmdbcreator.cpp:95 msgid "" -"The type of the option. This determines how the option is presented graphically " -"to the user." +"The executable %1 could not be found in your PATH. Check that this program " +"exists and is accessible in your PATH variable." msgstr "" +"Ii gávdnan prográmmafiilla %1 ohcanbálgás (PATH). Dárkkis ahte prográmma gávdno " +"ja lea olamuttus ohcanbálgás." -#: management/kxmlcommanddlg.cpp:297 +#: management/kmdbcreator.cpp:99 msgid "" -"The format of the option. This determines how the option is formatted for " -"inclusion in the global command line. The tag %value " -"can be used to represent the user selection. This tag will be replaced at " -"run-time by a string representation of the option value." +"Unable to start the creation of the driver database. The execution of %1 " +"failed." msgstr "" -#: management/kxmlcommanddlg.cpp:303 -msgid "" -"The default value of the option. For non persistent options, nothing is added " -"to the command line if the option has that default value. If this value does " -"not correspond to the actual default value of the underlying utility, make the " -"option persistent to avoid unwanted effects." -msgstr "" +#: management/kmdbcreator.cpp:113 +msgid "Please wait while TDE rebuilds a driver database." +msgstr "Vuorddes dan bottago TDE hukse stivrrandiehtovuođu." -#: management/kxmlcommanddlg.cpp:309 -msgid "" -"Make the option persistent. A persistent option is always written to the " -"command line, whatever its value. This is useful when the chosen default value " -"does not match with the actual default value of the underlying utility." -msgstr "" +#: management/kmdbcreator.cpp:114 +msgid "Driver Database" +msgstr "Stivrrandiehtovuođđu" -#: management/kxmlcommanddlg.cpp:313 -#, c-format +#: management/kmdbcreator.cpp:171 msgid "" -"The full command line to execute the associated underlying utility. This " -"command line is based on a mechanism of tags that are replaced at run-time. The " -"supported tags are:" -"
    " -"
  • %filterargs: command options
    • " -"
  • %filterinput: input specification
    • " -"
  • %filteroutput: output specification
    • " -"
  • %psu: the page size in upper case
    • " -"
  • %psl: the page size in lower case
" +"Error while creating driver database: abnormal child-process termination." msgstr "" -#: management/kxmlcommanddlg.cpp:323 -#, c-format -msgid "" -"Input specification when the underlying utility reads input data from a file. " -"Use the tag %in to represent the input filename." -msgstr "" +#: management/kmwname.cpp:34 +msgid "General Information" +msgstr "Oppalaš diehtu" -#: management/kxmlcommanddlg.cpp:327 -#, c-format +#: management/kmwname.cpp:37 msgid "" -"Output specification when the underlying utility writes output data to a file. " -"Use the tag %out to represent the output filename." +"

Enter the information concerning your printer or class. Name " +"is mandatory, Location and Description " +"are not (they may even not be used on some systems).

" msgstr "" +"

Atte dieđuid du čálána dahje luohkká birra. Namma lea bákkolaš; " +"Čujuhus ja Válddahus eaba leat (eai várra geavahuvvoge eará " +"vuogádagain).

" -#: management/kxmlcommanddlg.cpp:331 +#: management/kmwname.cpp:39 +msgid "Name:" +msgstr "Namma:" + +#: management/kmwname.cpp:48 +msgid "You must supply at least a name." +msgstr "Fertet addit unnimus ovtta nama." + +#: management/kmwname.cpp:56 msgid "" -"Input specification when the underlying utility reads input data from its " -"standard input." +"It is usually not a good idea to include spaces in printer name: it may prevent " +"your printer from working correctly. The wizard can strip all spaces from the " +"string you entered, resulting in %1; what do you want to do?" msgstr "" -#: management/kxmlcommanddlg.cpp:335 +#: management/kmwname.cpp:62 +msgid "Strip" +msgstr "Váldde eret" + +#: management/kmwdriver.cpp:80 management/kmwend.cpp:106 +#: management/kmwname.cpp:83 +msgid "Raw printer" +msgstr "Oktageardánis čálán" + +#: management/kmwpassword.cpp:37 +msgid "User Identification" +msgstr "Geavaheaddjeidentifikašuvdna" + +#: management/kmwpassword.cpp:43 msgid "" -"Output specification when the underlying utility writes output data to its " -"standard output." +"

This backend may require a login/password to work properly. Select the type " +"of access to use and fill in the login and password entries if needed.

" msgstr "" -#: management/kxmlcommanddlg.cpp:339 -msgid "" -"A comment about the underlying utility, which can be viewed by the user from " -"the interface. This comment string supports basic HTML tags like <a>, " -"<b> or <i>." +#: management/kmwpassword.cpp:49 +msgid "&Login:" +msgstr "&Geavaheaddjinamma:" + +#: management/kmwpassword.cpp:53 +msgid "&Anonymous (no login/password)" msgstr "" -#: management/kxmlcommanddlg.cpp:568 +#: management/kmwpassword.cpp:54 +msgid "&Guest account (login=\"guest\")" +msgstr "&Guossekontu (geavaheaddjinamma «guest»)" + +#: management/kmwpassword.cpp:55 +msgid "Nor&mal account" +msgstr "&Dábálaš kontu" + +#: management/kmwpassword.cpp:88 +msgid "Select one option" +msgstr "Vállje ovtta molssaeavttu." + +#: management/kmwpassword.cpp:90 +msgid "User name is empty." +msgstr "Geavaheaddjenamma lea guorus." + +#: management/kmwdriverselect.cpp:37 +msgid "Driver Selection" +msgstr "Stivrraneavttut" + +#: management/kmwdriverselect.cpp:43 msgid "" -"Invalid identification name. Empty strings and \"__root__\" are not allowed." +"

Several drivers have been detected for this model. Select the driver you " +"want to use. You will have the opportunity to test it as well as to change it " +"if necessary.

" msgstr "" +"

Gávdno máŋgá stivrrana dán málle várás. Vállje stivrrana maid háliidat " +"geavahit. Don sáhtát dan geahččalit ja molsut dan maŋŋilit.

" -#: management/kxmlcommanddlg.cpp:649 management/kxmlcommanddlg.cpp:652 -msgid "New Group" -msgstr "Ođđa joavku" +#: management/kmwdriverselect.cpp:46 +msgid "Driver Information" +msgstr "Stivrrandiehtu" -#: management/kxmlcommanddlg.cpp:668 management/kxmlcommanddlg.cpp:671 -msgid "New Option" -msgstr "Ođđa molssaeaktu" +#: management/kmwdriverselect.cpp:62 +msgid "You must select a driver." +msgstr "Fertet válljet stivrrana." -#: management/kxmlcommanddlg.cpp:795 management/kxmlcommanddlg.cpp:939 -#, c-format -msgid "Command Edit for %1" -msgstr "" +#: management/kmwdriverselect.cpp:82 +msgid " [recommended]" +msgstr " [oidojuvvon]" -#: management/kxmlcommanddlg.cpp:833 -msgid "&Mime Type Settings" -msgstr "Heivehusat mime-šlájaid várás" +#: management/kmwdriverselect.cpp:113 +msgid "No information about the selected driver." +msgstr "Eai leat dieđut válljejuvvon stivrrana birra." -#: management/kxmlcommanddlg.cpp:839 -msgid "Supported &Input Formats" -msgstr "Dorjojuvvon &sisaformáhtat" +#: management/kmpropbackend.cpp:34 +msgid "Printer type:" +msgstr "Čálánšládja:" -#: kpfilterpage.cpp:407 management/kxmlcommanddlg.cpp:840 -msgid "Requirements" -msgstr "Gáibádusat" +#: management/kmpropbackend.cpp:48 +msgid "Interface" +msgstr "Lakta" -#: management/kxmlcommanddlg.cpp:851 -msgid "&Edit Command..." -msgstr "&Doaimmat gohččuma …" +#: management/kmpropbackend.cpp:49 +msgid "Interface Settings" +msgstr "Rámmaiešvuođat" -#: management/kxmlcommanddlg.cpp:868 -msgid "Output &format:" -msgstr "Olggos&formáhtta:" +#: management/kmpropbackend.cpp:62 +msgid "IPP Printer" +msgstr "IPP-čálán" + +#: management/kmpropbackend.cpp:63 +msgid "Local USB Printer" +msgstr "Báikkálaš USB-čálán" + +#: management/kmpropbackend.cpp:64 +msgid "Local Parallel Printer" +msgstr "Báikkálaš bálddalas čálán" + +#: management/kmpropbackend.cpp:65 +msgid "Local Serial Printer" +msgstr "Báikkálaš maŋŋálas čálán" + +#: management/kmpropbackend.cpp:66 +msgid "Network Printer (socket)" +msgstr "Fierpmádatčálán (socket)" + +#: management/kmpropbackend.cpp:67 +msgid "SMB printers (Windows)" +msgstr "SMB-čálánat (Windows)" + +#: lpd/kmlpduimanager.cpp:45 management/kmpropbackend.cpp:68 +#: rlpr/kmwrlpr.cpp:116 +msgid "Remote LPD queue" +msgstr "Gáiddus LPD-gárgadas" + +#: management/kmpropbackend.cpp:69 +msgid "File printer" +msgstr "Fiilačálán" + +#: management/kmpropbackend.cpp:70 +msgid "Serial Fax/Modem printer" +msgstr "Maŋŋálas fáksa/modem-čálán" -#: management/kxmlcommanddlg.cpp:870 -msgid "ID name:" -msgstr "ID-namma:" +#: management/kmpropbackend.cpp:71 +msgid "" +"_: Unknown Protocol\n" +"Unknown" +msgstr "Amas" -#: management/kxmlcommanddlg.cpp:1033 -msgid "exec:/" -msgstr "exec:/" +#: management/kmconfigdialog.cpp:38 +msgid "TDE Print Configuration" +msgstr "Heivet čáliheami TDE:as" -#: management/kmwlpd.cpp:41 -msgid "LPD Queue Information" -msgstr "LPD-gárgadasdieđut" +#: management/kmpropdriver.cpp:36 +msgid "Manufacturer:" +msgstr "Buvttadeaddji:" -#: management/kmwlpd.cpp:44 -msgid "" -"

Enter the information concerning the remote LPD queue; this wizard will " -"check it before continuing.

" -msgstr "" +#: management/kmpropdriver.cpp:37 +msgid "Printer model:" +msgstr "Čálánmálle:" -#: management/kmwlpd.cpp:54 -msgid "Some information is missing." -msgstr "Dieđut váilu." +#: management/kmpropdriver.cpp:38 +msgid "Driver info:" +msgstr "Stivrrandieđut:" -#: management/kmwlpd.cpp:61 -#, fuzzy -msgid "Cannot find queue %1 on server %2; do you want to continue anyway?" -msgstr "Ii gávnna gárgadasa %1 %2 bálvvás. Háliidatgo liikká joatkit?" +#: lpd/lpdtools.cpp:239 management/kmpropdriver.cpp:53 +#: management/kmwend.cpp:104 +msgid "Driver" +msgstr "Stivrran" -#: management/kmconfigfilter.cpp:40 -msgid "Filter" -msgstr "Silli" +#: management/kmwsocket.cpp:38 +msgid "Network Printer Information" +msgstr "Dieđut fierpmádatčálána birra" -#: management/kmconfigfilter.cpp:41 -msgid "Printer Filtering Settings" -msgstr "Čálánsilleheivehusat" +#: management/kmwsocket.cpp:48 +msgid "&Printer address:" +msgstr "Čá&lánčujuhus:" -#: management/kmconfigfilter.cpp:44 -msgid "Printer Filter" -msgstr "Čálánsilli" +#: management/kmwsocket.cpp:49 +msgid "P&ort:" +msgstr "&Verrát:" -#: management/kmconfigfilter.cpp:56 -msgid "" -"The printer filtering allows you to view only a specific set of printers " -"instead of all of them. This may be useful when there are a lot of printers " -"available but you only use a few ones. Select the printers you want to see from " -"the list on the left or enter a Location filter (ex: Group_1*). Both are " -"cumulative and ignored if empty." -msgstr "" +#: management/kmwsocket.cpp:99 +msgid "You must enter a printer address." +msgstr "Fertet addit čálánčujuhusa." -#: management/kmconfigfilter.cpp:62 -msgid "Location filter:" -msgstr "Báikesilli:" +#: management/kmwsocket.cpp:110 +msgid "Wrong port number." +msgstr "Boastu verrátnummir." -#: management/kmwdriverselect.cpp:37 -msgid "Driver Selection" -msgstr "Stivrraneavttut" +#: management/kmwizard.cpp:64 management/kmwizard.cpp:209 +msgid "&Next >" +msgstr "Č&uovvovaš >" -#: management/kmwdriverselect.cpp:43 -msgid "" -"

Several drivers have been detected for this model. Select the driver you " -"want to use. You will have the opportunity to test it as well as to change it " -"if necessary.

" -msgstr "" -"

Gávdno máŋgá stivrrana dán málle várás. Vállje stivrrana maid háliidat " -"geavahit. Don sáhtát dan geahččalit ja molsut dan maŋŋilit.

" +#: management/kmwizard.cpp:66 +msgid "< &Back" +msgstr "< &Ovddit" -#: management/kmwdriverselect.cpp:46 -msgid "Driver Information" -msgstr "Stivrrandiehtu" +#: management/kmwizard.cpp:131 management/kmwizard.cpp:166 +#: management/kmwizard.cpp:191 +msgid "Add Printer Wizard" +msgstr "Čálánsajáiduhttin ofelaš" -#: management/kmwdriverselect.cpp:62 -msgid "You must select a driver." -msgstr "Fertet válljet stivrrana." +#: management/kmwizard.cpp:166 +msgid "Modify Printer" +msgstr "Rievdat čálána" -#: management/kmwdriverselect.cpp:82 -msgid " [recommended]" -msgstr " [oidojuvvon]" +#: management/kmwizard.cpp:191 +msgid "Unable to find the requested page." +msgstr "Ii gávnna jearahuvvon siiddu." -#: management/kmwdriverselect.cpp:113 -msgid "No information about the selected driver." -msgstr "Eai leat dieđut válljejuvvon stivrrana birra." +#: management/kmwizard.cpp:207 management/kmwizard.cpp:234 +msgid "&Finish" +msgstr "&Heaittit" #: management/kmwinfopage.cpp:32 msgid "Introduction" msgstr "Oahpástuvvan" #: management/kmwinfopage.cpp:37 +#, fuzzy msgid "" "

Welcome,

" "
" @@ -3823,8 +3653,8 @@ msgid "" "configuring a printer for your printing system. At each step, you can always go " "back using the Back button.

" "
" -"

We hope you'll enjoy this tool!

" -"

The TDE printing team.

" +"

We hope you enjoy this tool!

" +"
" msgstr "" "

Bures boahtin!

" "
" @@ -3835,242 +3665,305 @@ msgstr "" "

Sávvamis dát reaidu lea ávkin dutnje!

" "

TDE-čálihan joavku.

" -#: management/kmdriverdbwidget.cpp:51 -msgid "&PostScript printer" -msgstr "&PostScript-čálán" +#: management/kmconfigjobs.cpp:33 management/kmpages.cpp:59 +msgid "Jobs" +msgstr "Barggut" -#: management/kmdriverdbwidget.cpp:52 -msgid "&Raw printer (no driver needed)" -msgstr "" +#: management/kmconfigjobs.cpp:37 +msgid "Jobs Shown" +msgstr "Čájehuvvon barggut" -#: management/kmdriverdbwidget.cpp:55 -msgid "&Other..." -msgstr "&Eará …" +#: management/kmconfigjobs.cpp:42 +msgid "Maximum number of jobs shown:" +msgstr "Eanemus barggut mat čájehuvvojit:" -#: management/kmdriverdbwidget.cpp:56 -msgid "&Manufacturer:" -msgstr "&Buvttadeaddji:" +#: management/kxmlcommanddlg.cpp:108 +msgid "Integer" +msgstr "Čávdelohku" -#: management/kmdriverdbwidget.cpp:57 -msgid "Mo&del:" -msgstr "Má&lle:" +#: management/kxmlcommanddlg.cpp:109 +msgid "Float" +msgstr "Desimálaárvu" -#: management/kmdriverdbwidget.cpp:157 management/kmdriverdbwidget.cpp:166 -msgid "Loading..." -msgstr "Viežžamin …" +#: management/kxmlcommanddlg.cpp:110 +msgid "List" +msgstr "Listu" -#: management/kmdriverdbwidget.cpp:217 -msgid "Unable to find the PostScript driver." -msgstr "Ii gávnna PostScript-stivrrana." +#: management/kmspecialprinterdlg.cpp:57 management/kxmlcommanddlg.cpp:115 +#: management/kxmlcommanddlg.cpp:866 +msgid "&Description:" +msgstr "&Válddahus:" -#: management/kmdriverdbwidget.cpp:230 -msgid "Select Driver" -msgstr "Vállje stivrrana" +#: management/kmspecialprinterdlg.cpp:83 management/kxmlcommanddlg.cpp:116 +msgid "&Format:" +msgstr "&Formáhtta:" -#: management/kmdriverdbwidget.cpp:247 management/kmdriverdbwidget.cpp:249 -msgid "" -msgstr "" +#: management/kxmlcommanddlg.cpp:118 +msgid "Default &value:" +msgstr "&Standárdárvu:" -#: management/kmdriverdbwidget.cpp:252 -msgid "Database" -msgstr "Diehtovuođđu" +#: management/kxmlcommanddlg.cpp:119 +msgid "Co&mmand:" +msgstr "Go&hččun:" -#: management/kmdriverdbwidget.cpp:259 -msgid "Wrong driver format." -msgstr "Boasto stivrranformáhtta." +#: management/kxmlcommanddlg.cpp:126 +msgid "&Persistent option" +msgstr "&Giddes molssaeavttut" -#: management/kmdriverdbwidget.cpp:268 -msgid "Other" -msgstr "Eará" +#: management/kxmlcommanddlg.cpp:128 +msgid "Va&lues" +msgstr "Ár&vvut" -#: management/kxmlcommandselector.cpp:54 -msgid "New command" -msgstr "Ođđa gohččun" +#: management/kxmlcommanddlg.cpp:136 +msgid "Minimum v&alue:" +msgstr "U&nnimus árvu:" -#: management/kxmlcommandselector.cpp:55 -msgid "Edit command" -msgstr "Doaimmat gohččuma" +#: management/kxmlcommanddlg.cpp:137 +msgid "Ma&ximum value:" +msgstr "S&tuorimus árvu:" -#: management/kxmlcommandselector.cpp:72 -msgid "&Browse..." -msgstr "&Bláđđe …" +#: management/kmwend.cpp:53 management/kmwend.cpp:112 +#: management/kxmlcommanddlg.cpp:142 management/kxmlcommanddlg.cpp:545 +msgid "Description" +msgstr "Válddahus" -#: management/kxmlcommandselector.cpp:73 -msgid "Use co&mmand:" -msgstr "&Geavat gohččuma" +#: management/kxmlcommanddlg.cpp:150 +msgid "Add value" +msgstr "Lasit árvvu" + +#: management/kxmlcommanddlg.cpp:151 +msgid "Delete value" +msgstr "Sihko árvvu" + +#: management/kxmlcommanddlg.cpp:153 +msgid "Apply changes" +msgstr "Bija rievdadusaid atnui" + +#: management/kxmlcommanddlg.cpp:154 +msgid "Add group" +msgstr "Lasit joavkku" + +#: management/kxmlcommanddlg.cpp:155 +msgid "Add option" +msgstr "Lasit molssaeavttu" + +#: management/kxmlcommanddlg.cpp:156 +msgid "Delete item" +msgstr "Sihko merkoša" + +#: management/kxmlcommanddlg.cpp:157 tdefilelist.cpp:135 +msgid "Move up" +msgstr "Sirdde bajás" + +#: management/kxmlcommanddlg.cpp:158 tdefilelist.cpp:142 +msgid "Move down" +msgstr "Sirdde vulos" + +#: management/kxmlcommanddlg.cpp:162 +msgid "&Input From" +msgstr "&Sisadáhtaid dás" + +#: management/kxmlcommanddlg.cpp:163 +msgid "O&utput To" +msgstr "O&lggosdáhtáid deikke" + +#: management/kxmlcommanddlg.cpp:164 management/kxmlcommanddlg.cpp:166 +msgid "File:" +msgstr "Fiila:" -#: management/kxmlcommandselector.cpp:174 -msgid "Command Name" -msgstr "Gohččunnamma" +#: management/kxmlcommanddlg.cpp:165 management/kxmlcommanddlg.cpp:167 +msgid "Pipe:" +msgstr "Bohcit:" -#: management/kxmlcommandselector.cpp:174 -msgid "Enter an identification name for the new command:" +#: management/kxmlcommanddlg.cpp:285 +msgid "" +"An identification string. Use only alphanumeric characters except spaces. The " +"string __root__ is reserved for internal use." msgstr "" -#: management/kxmlcommandselector.cpp:183 +#: management/kxmlcommanddlg.cpp:289 msgid "" -"A command named %1 already exists. Do you want to continue and edit the " -"existing one?" +"A description string. This string is shown in the interface, and should be " +"explicit enough about the role of the corresponding option." msgstr "" -"Gohččun nammaduvvon %1 gávdno juo. Háliidatgo joatkit ja doaimmahit boares " -"gohččuma?" - -#: management/kxmlcommandselector.cpp:220 -msgid "Internal error. The XML driver for the command %1 could not be found." -msgstr "Siskkildas meattáhus. Ii gávdnan XML-stivrrana %1 gohččuma várás." -#: management/kxmlcommandselector.cpp:238 -msgid "output" +#: management/kxmlcommanddlg.cpp:293 +msgid "" +"The type of the option. This determines how the option is presented graphically " +"to the user." msgstr "" -#: management/kxmlcommandselector.cpp:242 -msgid "undefined" -msgstr "ii meroštuvvon" - -#: management/kxmlcommandselector.cpp:247 -msgid "not allowed" -msgstr "lobikeahttá" +#: management/kxmlcommanddlg.cpp:297 +msgid "" +"The format of the option. This determines how the option is formatted for " +"inclusion in the global command line. The tag %value " +"can be used to represent the user selection. This tag will be replaced at " +"run-time by a string representation of the option value." +msgstr "" -#: management/kxmlcommandselector.cpp:253 -msgid "(Unavailable: requirements not satisfied)" -msgstr "(Ii olamuttus: Gáibádusat eai leat ollašuvvon)" +#: management/kxmlcommanddlg.cpp:303 +msgid "" +"The default value of the option. For non persistent options, nothing is added " +"to the command line if the option has that default value. If this value does " +"not correspond to the actual default value of the underlying utility, make the " +"option persistent to avoid unwanted effects." +msgstr "" -#: management/kmlistview.cpp:125 -msgid "Print System" -msgstr "Čálihanvuogádat" +#: management/kxmlcommanddlg.cpp:309 +msgid "" +"Make the option persistent. A persistent option is always written to the " +"command line, whatever its value. This is useful when the chosen default value " +"does not match with the actual default value of the underlying utility." +msgstr "" -#: management/kmlistview.cpp:128 -msgid "Classes" -msgstr "Luohkát" +#: management/kxmlcommanddlg.cpp:313 +#, c-format +msgid "" +"The full command line to execute the associated underlying utility. This " +"command line is based on a mechanism of tags that are replaced at run-time. The " +"supported tags are:" +"
    " +"
  • %filterargs: command options
    • " +"
  • %filterinput: input specification
    • " +"
  • %filteroutput: output specification
    • " +"
  • %psu: the page size in upper case
    • " +"
  • %psl: the page size in lower case
" +msgstr "" -#: management/kmlistview.cpp:131 -msgid "Printers" -msgstr "Čálánat" +#: management/kxmlcommanddlg.cpp:323 +#, c-format +msgid "" +"Input specification when the underlying utility reads input data from a file. " +"Use the tag %in to represent the input filename." +msgstr "" -#: management/kmlistview.cpp:134 -msgid "Specials" -msgstr "Erenoamážat" +#: management/kxmlcommanddlg.cpp:327 +#, c-format +msgid "" +"Output specification when the underlying utility writes output data to a file. " +"Use the tag %out to represent the output filename." +msgstr "" -#: management/kmpropdriver.cpp:36 -msgid "Manufacturer:" -msgstr "Buvttadeaddji:" +#: management/kxmlcommanddlg.cpp:331 +msgid "" +"Input specification when the underlying utility reads input data from its " +"standard input." +msgstr "" -#: management/kmpropdriver.cpp:37 -msgid "Printer model:" -msgstr "Čálánmálle:" +#: management/kxmlcommanddlg.cpp:335 +msgid "" +"Output specification when the underlying utility writes output data to its " +"standard output." +msgstr "" -#: management/kmpropdriver.cpp:38 -msgid "Driver info:" -msgstr "Stivrrandieđut:" +#: management/kxmlcommanddlg.cpp:339 +msgid "" +"A comment about the underlying utility, which can be viewed by the user from " +"the interface. This comment string supports basic HTML tags like <a>, " +"<b> or <i>." +msgstr "" -#: kpdriverpage.cpp:30 management/kmpropdriver.cpp:54 -msgid "Driver Settings" -msgstr "Stivrranheivehusat" +#: management/kxmlcommanddlg.cpp:568 +msgid "" +"Invalid identification name. Empty strings and \"__root__\" are not allowed." +msgstr "" -#: management/kmconfigjobs.cpp:33 management/kmpages.cpp:59 -msgid "Jobs" -msgstr "Barggut" +#: management/kxmlcommanddlg.cpp:649 management/kxmlcommanddlg.cpp:652 +msgid "New Group" +msgstr "Ođđa joavku" -#: management/kmconfigjobs.cpp:37 -msgid "Jobs Shown" -msgstr "Čájehuvvon barggut" +#: management/kxmlcommanddlg.cpp:668 management/kxmlcommanddlg.cpp:671 +msgid "New Option" +msgstr "Ođđa molssaeaktu" -#: management/kmconfigjobs.cpp:42 -msgid "Maximum number of jobs shown:" -msgstr "Eanemus barggut mat čájehuvvojit:" +#: management/kxmlcommanddlg.cpp:795 management/kxmlcommanddlg.cpp:939 +#, c-format +msgid "Command Edit for %1" +msgstr "" -#: management/kmwname.cpp:34 -msgid "General Information" -msgstr "Oppalaš diehtu" +#: management/kxmlcommanddlg.cpp:833 +msgid "&Mime Type Settings" +msgstr "Heivehusat mime-šlájaid várás" -#: management/kmwname.cpp:37 -msgid "" -"

Enter the information concerning your printer or class. Name " -"is mandatory, Location and Description " -"are not (they may even not be used on some systems).

" -msgstr "" -"

Atte dieđuid du čálána dahje luohkká birra. Namma lea bákkolaš; " -"Čujuhus ja Válddahus eaba leat (eai várra geavahuvvoge eará " -"vuogádagain).

" +#: management/kxmlcommanddlg.cpp:839 +msgid "Supported &Input Formats" +msgstr "Dorjojuvvon &sisaformáhtat" -#: management/kmwname.cpp:39 -msgid "Name:" -msgstr "Namma:" +#: kpfilterpage.cpp:407 management/kxmlcommanddlg.cpp:840 +msgid "Requirements" +msgstr "Gáibádusat" -#: management/kmwname.cpp:48 -msgid "You must supply at least a name." -msgstr "Fertet addit unnimus ovtta nama." +#: management/kxmlcommanddlg.cpp:851 +msgid "&Edit Command..." +msgstr "&Doaimmat gohččuma …" -#: management/kmwname.cpp:56 -msgid "" -"It is usually not a good idea to include spaces in printer name: it may prevent " -"your printer from working correctly. The wizard can strip all spaces from the " -"string you entered, resulting in %1; what do you want to do?" -msgstr "" +#: management/kxmlcommanddlg.cpp:868 +msgid "Output &format:" +msgstr "Olggos&formáhtta:" -#: management/kmwname.cpp:62 -msgid "Strip" -msgstr "Váldde eret" +#: management/kxmlcommanddlg.cpp:870 +msgid "ID name:" +msgstr "ID-namma:" -#: kprinterimpl.cpp:510 management/kmwname.cpp:62 -msgid "Keep" -msgstr "Doalat" +#: management/kxmlcommanddlg.cpp:1033 +msgid "exec:/" +msgstr "exec:/" -#: management/kmwbackend.cpp:54 -msgid "Backend Selection" -msgstr "Vállje duogáščoavddus" +#: driver.cpp:377 kpgeneralpage.cpp:261 lpd/lpdtools.cpp:307 +#: management/kmconfiggeneral.cpp:44 management/kmpropgeneral.cpp:54 +#: management/kmwend.cpp:49 +msgid "General" +msgstr "Oppalaš" -#: management/kmwbackend.cpp:68 -msgid "You must select a backend." -msgstr "Fertet válljet duogáščoavdusa." +#: management/kmconfiggeneral.cpp:45 management/kmpropgeneral.cpp:55 +msgid "General Settings" +msgstr "Oppalaš heivehusat" -#: management/kmwbackend.cpp:115 -msgid "&Local printer (parallel, serial, USB)" -msgstr "&Báikkálaš čálán (bálddalas, maŋŋálas, USB)" +#: management/kmconfiggeneral.cpp:48 +msgid "Refresh Interval" +msgstr "Ođasmahttingaskkadat" -#: management/kmwbackend.cpp:116 -msgid "" -"" -"

Locally-connected printer

" -"

Use this for a printer connected to the computer via a parallel, serial or " -"USB port.

" -msgstr "" +#: management/kmconfiggeneral.cpp:51 +msgid " sec" +msgstr " s" -#: management/kmwbackend.cpp:122 -msgid "&SMB shared printer (Windows)" -msgstr "&SMB-juohkojuvvon čálán (Windows)" +#: kpgeneralpage.cpp:416 lpd/lpdtools.cpp:40 management/kmconfiggeneral.cpp:52 +msgid "Disabled" +msgstr "Eret" -#: management/kmwbackend.cpp:123 +#: management/kmconfiggeneral.cpp:53 msgid "" -"" -"

Shared Windows printer

" -"

Use this for a printer installed on a Windows server and shared on the " -"network using the SMB protocol (samba).

" +"This time setting controls the refresh rate of various TDE Print " +"components like the print manager and the job viewer." msgstr "" -#: management/kmwbackend.cpp:130 -msgid "&Remote LPD queue" -msgstr "&Gáiddus LPD-gárgadas" +#: management/kmconfiggeneral.cpp:57 +msgid "Test Page" +msgstr "Geahččalansiidu" -#: management/kmwbackend.cpp:131 -msgid "" -"" -"

Print queue on a remote LPD server

" -"

Use this for a print queue existing on a remote machine running a LPD print " -"server.

" +#: management/kmconfiggeneral.cpp:58 +msgid "&Specify personal test page" +msgstr "&Vállje iežat geahččalansiiddu" + +#: management/kmconfiggeneral.cpp:60 +msgid "Preview..." +msgstr "Ovdačájeheapmi …" + +#: management/kmconfiggeneral.cpp:70 +msgid "Sho&w printing status message box" msgstr "" -#: management/kmwbackend.cpp:137 -msgid "Ne&twork printer (TCP)" -msgstr "Fier&pmádatčálán (TCP)" +#: management/kmconfiggeneral.cpp:71 +msgid "De&faults to the last printer used in the application" +msgstr "" -#: management/kmwbackend.cpp:138 +#: management/kmconfiggeneral.cpp:127 msgid "" -"" -"

Network TCP printer

" -"

Use this for a network-enabled printer using TCP (usually on port 9100) as " -"communication protocol. Most network printers can use this mode.

" +"The selected test page is not a PostScript file. You may not be able to test " +"your printer anymore." msgstr "" +"Válljejuvvon geahččalansiidu ii leat PostScript-fiila. It dáidde sáhttit čálána " +"šat geahččalit." #: management/kminstancepage.cpp:61 msgid "" @@ -4160,9 +4053,174 @@ msgstr "Siskkildas meattáhus: Ii gávdnan čálána." msgid "Unable to send test page to %1." msgstr "Ii sáhte sáddet geahččalansiiddu dása: %1." -#: management/kmpages.cpp:69 -msgid "Instances" -msgstr "Instánssat" +#: management/kmdriverdialog.cpp:48 +msgid "" +"Some options are in conflict. You must resolve those conflicts before " +"continuing." +msgstr "" +"Muhton molssaeavttut eai heive oktii. Fertet čoavdit dáid váttisvuođaid ovdal " +"go joatkkát." + +#: management/kmlistview.cpp:125 +msgid "Print System" +msgstr "Čálihanvuogádat" + +#: management/kmlistview.cpp:128 +msgid "Classes" +msgstr "Luohkát" + +#: management/kmlistview.cpp:131 +msgid "Printers" +msgstr "Čálánat" + +#: management/kmlistview.cpp:134 +msgid "Specials" +msgstr "Erenoamážat" + +#: management/kmwlocal.cpp:38 +msgid "Local Port Selection" +msgstr "Vállje báikkálaš verráha" + +#: management/kmwlocal.cpp:50 +msgid "Local System" +msgstr "Báikkálaš vuogádat" + +#: management/kmwlocal.cpp:57 +msgid "Parallel" +msgstr "Bálddalas" + +#: management/kmwlocal.cpp:58 +msgid "Serial" +msgstr "Maŋŋálas" + +#: management/kmwlocal.cpp:59 +msgid "USB" +msgstr "USB" + +#: driver.cpp:389 management/kmwlocal.cpp:60 +msgid "Others" +msgstr "Earát" + +#: management/kmwlocal.cpp:63 +msgid "" +"

Select a valid detected port, or enter directly the corresponding URI in the " +"bottom edit field.

" +msgstr "" +"

Vállje gustojeaddji verráha dahje čále URI:a njuolgga sisa teakstagieddái " +"dás vuolábealde.

" + +#: management/kmwlocal.cpp:78 +msgid "" +"_: The URI is empty\n" +"Empty URI." +msgstr "Guorus URI." + +#: management/kmwlocal.cpp:83 +msgid "The local URI doesn't correspond to a detected port. Continue?" +msgstr "" + +#: management/kmwlocal.cpp:85 +msgid "Select a valid port." +msgstr "Vállje gustojeaddji verráha." + +#: management/kmwlocal.cpp:166 +msgid "Unable to detect local ports." +msgstr "Ii gávnna báikkálaš verráhiid." + +#: management/kmwlpd.cpp:41 +msgid "LPD Queue Information" +msgstr "LPD-gárgadasdieđut" + +#: management/kmwlpd.cpp:44 +msgid "" +"

Enter the information concerning the remote LPD queue; this wizard will " +"check it before continuing.

" +msgstr "" + +#: management/kmwlpd.cpp:47 rlpr/kmproprlpr.cpp:35 rlpr/kmwrlpr.cpp:63 +msgid "Queue:" +msgstr "Gárgadas:" + +#: management/kmwlpd.cpp:54 +msgid "Some information is missing." +msgstr "Dieđut váilu." + +#: management/kmwlpd.cpp:61 +#, fuzzy +msgid "Cannot find queue %1 on server %2; do you want to continue anyway?" +msgstr "Ii gávnna gárgadasa %1 %2 bálvvás. Háliidatgo liikká joatkit?" + +#: management/kmconfigfilter.cpp:40 +msgid "Filter" +msgstr "Silli" + +#: management/kmconfigfilter.cpp:41 +msgid "Printer Filtering Settings" +msgstr "Čálánsilleheivehusat" + +#: management/kmconfigfilter.cpp:44 +msgid "Printer Filter" +msgstr "Čálánsilli" + +#: management/kmconfigfilter.cpp:56 +msgid "" +"The printer filtering allows you to view only a specific set of printers " +"instead of all of them. This may be useful when there are a lot of printers " +"available but you only use a few ones. Select the printers you want to see from " +"the list on the left or enter a Location filter (ex: Group_1*). Both are " +"cumulative and ignored if empty." +msgstr "" + +#: management/kmconfigfilter.cpp:62 +msgid "Location filter:" +msgstr "Báikesilli:" + +#: management/kmconfigfonts.cpp:43 +msgid "Font Settings" +msgstr "Fontaheivehusat" + +#: management/kmconfigfonts.cpp:46 +msgid "Fonts Embedding" +msgstr "Vuojut fonttaid" + +#: management/kmconfigfonts.cpp:47 +msgid "Fonts Path" +msgstr "Fontabálggis" + +#: management/kmconfigfonts.cpp:49 +msgid "&Embed fonts in PostScript data when printing" +msgstr "&Vuojut fonttaid PostScript-dáhtaide čálihettiin" + +#: management/kmconfigfonts.cpp:57 +msgid "&Up" +msgstr "&Bajás" + +#: management/kmconfigfonts.cpp:58 +msgid "&Down" +msgstr "&Vulos" + +#: management/kmconfigfonts.cpp:59 +msgid "&Add" +msgstr "&Lasit" + +#: management/kmconfigfonts.cpp:61 +msgid "Additional director&y:" +msgstr "&Liigeohcu:" + +#: management/kmconfigfonts.cpp:85 +msgid "" +"These options will automatically put fonts in the PostScript file which are not " +"present on the printer. Font embedding usually produces better print results " +"(closer to what you see on the screen), but larger print data as well." +msgstr "" + +#: management/kmconfigfonts.cpp:89 +msgid "" +"When using font embedding you can select additional directories where TDE " +"should search for embeddable font files. By default, the X server font path is " +"used, so adding those directories is not needed. The default search path should " +"be sufficient in most cases." +msgstr "" #: management/kmspecialprinterdlg.cpp:46 msgid "Add Special Printer" @@ -4211,720 +4269,799 @@ msgid "" "
  • %psu: the paper size with the first letter in upper case.
    • " msgstr "" -#: management/kmspecialprinterdlg.cpp:118 -msgid "" -"

    The default mimetype for the output file (e.g. application/postscript).

    " -msgstr "" -"

    Standárda mime-šládja olggosfiilla várás. (omd. application/postscript).

    " +#: management/kmspecialprinterdlg.cpp:118 +msgid "" +"

    The default mimetype for the output file (e.g. application/postscript).

    " +msgstr "" +"

    Standárda mime-šládja olggosfiilla várás. (omd. application/postscript).

    " + +#: management/kmspecialprinterdlg.cpp:121 +msgid "

    The default extension for the output file (e.g. ps, pdf, ps.gz).

    " +msgstr "" + +#: management/kmspecialprinterdlg.cpp:170 +msgid "You must provide a non-empty name." +msgstr "Fertet addit nama mii ii leat guorus." + +#: management/kmspecialprinterdlg.cpp:178 +#, c-format +msgid "Invalid settings. %1." +msgstr "Gustohis heivehusat. %1." + +#: management/kmspecialprinterdlg.cpp:197 +#, c-format +msgid "Configuring %1" +msgstr "Heiveheamen %1" + +#: management/smbview.cpp:44 +msgid "Comment" +msgstr "Kommeanta" + +#: management/kmwend.cpp:33 +msgid "Confirmation" +msgstr "Nannen" + +#: management/kmwend.cpp:50 management/kmwend.cpp:106 +#: management/kmwend.cpp:109 tdefilelist.cpp:102 +msgid "Type" +msgstr "Šládja" + +#: management/kmwend.cpp:52 +msgid "Location" +msgstr "Čujuhus" + +#: management/kmwend.cpp:69 +msgid "Backend" +msgstr "" + +#: management/kmwend.cpp:74 +msgid "Device" +msgstr "Ovttadat" + +#: management/kmwend.cpp:77 +msgid "Printer IP" +msgstr "Čálán-IP" + +#: management/kmwend.cpp:78 management/kmwend.cpp:89 +msgid "Port" +msgstr "Verrát" + +#: management/kmwend.cpp:81 management/kmwend.cpp:88 +msgid "Host" +msgstr "Guossoheaddji" + +#: management/kmwend.cpp:82 rlpr/kmproprlpr.cpp:48 +msgid "Queue" +msgstr "Gárgadas" + +#: management/kmwend.cpp:91 +msgid "Account" +msgstr "Kontu" -#: management/kmspecialprinterdlg.cpp:121 -msgid "

    The default extension for the output file (e.g. ps, pdf, ps.gz).

    " -msgstr "" +#: management/kmwend.cpp:96 +msgid "URI" +msgstr "URI" -#: management/kmspecialprinterdlg.cpp:170 -msgid "You must provide a non-empty name." -msgstr "Fertet addit nama mii ii leat guorus." +#: management/kmwend.cpp:109 +msgid "DB driver" +msgstr "DV-stivrran" -#: management/kmspecialprinterdlg.cpp:178 -#, c-format -msgid "Invalid settings. %1." -msgstr "Gustohis heivehusat. %1." +#: management/kmwend.cpp:109 +msgid "External driver" +msgstr "Olgguldas stivrran" -#: management/kmspecialprinterdlg.cpp:197 -#, c-format -msgid "Configuring %1" -msgstr "Heiveheamen %1" +#: management/kmwend.cpp:110 +msgid "Manufacturer" +msgstr "Buvttadeaddji" -#: tdefilelist.cpp:42 -msgid "" -" Add File button " -"

    This button calls the 'File Open' dialog to let you select a file " -"for printing. Note, that " -"

      " -"
    • you can select ASCII or International Text, PDF, PostScript, JPEG, TIFF, " -"PNG, GIF and many other graphic formats. " -"
    • you can select various files from different paths and send them as one " -"\"multi-file job\" to the printing system.
    " -msgstr "" +#: management/kmwend.cpp:111 +msgid "Model" +msgstr "Modealla" -#: tdefilelist.cpp:54 -msgid "" -" Remove File button " -"

    This button removes the highlighted file from the list of to-be-printed " -"files. " -msgstr "" +#: management/kmwdriver.cpp:33 +msgid "Printer Model Selection" +msgstr "Vállje čálánmálle" -#: tdefilelist.cpp:59 -msgid "" -" Move File Up button " -"

    This button moves the highlighted file up in the list of files to be " -"printed.

    " -"

    In effect, this changes the order of the files' printout.

    " -msgstr "" +#: management/kmwdriver.cpp:113 +msgid "Internal error: unable to locate the driver." +msgstr "Siskkildas meattáhus: ii gávnna stivrrana." -#: tdefilelist.cpp:66 -msgid "" -" Move File Down button " -"

    This button moves the highlighted file down in the list of files to be " -"printed.

    " -"

    In effect, this changes the order of the files' printout.

    " -msgstr "" +#: management/kmpropgeneral.cpp:37 +msgid "Printer name:" +msgstr "Čálánnamma:" -#: tdefilelist.cpp:73 -msgid "" -" File Open button " -"

    This button tries to open the highlighted file, so you can view or edit it " -"before you send it to the printing system.

    " -"

    If you open files, TDEPrint will use the application matching the MIME type " -"of the file.

    " -msgstr "" +#: management/kmwsmb.cpp:35 +msgid "SMB Printer Settings" +msgstr "SMB-čálánheivehusat" -#: tdefilelist.cpp:82 -msgid "" -" File List view " -"

    This list displays all the files you selected for printing. You can see the " -"file name(s), file path(s) and the file (MIME) type(s) as determined by " -"TDEPrint. You may re-arrange the initial order of the list with the help of " -"the arrow buttons on the right.

    " -"

    The files will be printed as a single job, in the same order as displayed in " -"the list.

    " -"

    Note: You can select multiple files. The files may be in multiple " -"locations. The files may be of multiple MIME types. The buttons on the right " -"side let you add more files, remove already selected files from the list, " -"re-order the list (by moving files up or down), and open files. If you open " -"files, TDEPrint will use the application matching the MIME type of the file.

    " -"    " -msgstr "" +#: management/kmwsmb.cpp:41 +msgid "Scan" +msgstr "Oza" -#: tdefilelist.cpp:103 -msgid "Path" -msgstr "Bálggis" +#: management/kmwsmb.cpp:42 +msgid "Abort" +msgstr "Gaskkalduhte" -#: tdefilelist.cpp:115 -msgid "Add file" -msgstr "Lasit fiilla" +#: management/kmwsmb.cpp:44 +msgid "Workgroup:" +msgstr "Bargojoavku:" -#: tdefilelist.cpp:121 -msgid "Remove file" -msgstr "Váldde fiilla eret" +#: management/kmwsmb.cpp:45 +msgid "Server:" +msgstr "Bálvá:" -#: tdefilelist.cpp:128 -msgid "Open file" -msgstr "Raba fiilla" +#: management/kmwsmb.cpp:81 rlpr/kmrlprmanager.cpp:45 +msgid "Empty printer name." +msgstr "Guorus čálánnamma." -#: tdefilelist.cpp:149 -msgid "" -"Drag file(s) here or use the button to open a file dialog. Leave empty for " -"<STDIN>." -msgstr "" +#: management/kmwsmb.cpp:99 +#, c-format +msgid "Login: %1" +msgstr "Geavaheaddjinamma: %1" -#: driver.cpp:385 foomatic2loader.cpp:268 -msgid "Adjustments" -msgstr "" +#: management/kmwsmb.cpp:99 +msgid "" +msgstr "" -#: plugincombobox.cpp:33 -msgid "" -" Print Subsystem Selection " -"

    This combo box shows (and lets you select) a print subsystem to be used by " -"TDEPrint. (This print subsystem must, of course, be installed inside your " -"Operating System.) TDEPrint usually auto-detects the correct print subsystem by " -"itself upon first startup. Most Linux distributions have \"CUPS\", the " -"Common UNIX Printing System. " -msgstr "" +#: management/kmpages.cpp:69 +msgid "Instances" +msgstr "Instánssat" -#: plugincombobox.cpp:45 -msgid "Print s&ystem currently used:" -msgstr "Čálihan&vuogádat mii geavahuvvo:" +#: kpgeneralpage.cpp:86 +msgid "ISO A4" +msgstr "ISO A4" -#: plugincombobox.cpp:91 -msgid "" -" Current Connection " -"

    This line shows which CUPS server your PC is currently connected to for " -"printing and retrieving printer info. To switch to a different CUPS server, " -"click \"System Options\", then select \"Cups server\" and fill in the required " -"info. " -msgstr "" +#: kpgeneralpage.cpp:87 lpd/lpdtools.cpp:30 +msgid "US Letter" +msgstr "US Letter" -#: driverview.cpp:47 -msgid "" -" List of Driver Options (from PPD). " -"

    The upper pane of this dialog page contains all printjob options as laid " -"down in the printer's description file (PostScript Printer Description == " -"'PPD')

    " -"

    Click on any item in the list and watch the lower pane of this dialog page " -"display the available values.

    " -"

    Set the values as needed. Then use one of the pushbuttons below to " -"proceed:

    " -"
      " -"
    • 'Save' your settings if you want to re-use them in your next " -"job(s) too. 'Save' will store your settings permanently until you " -"change them again.
      • . " -"
    • Click 'OK' (without a prior click on 'Save'" -", if you want to use your selected settings just once, for the next print job. " -"'OK' will forget your current settings when kprinter is closed again, " -"and will start next time with the previously saved defaults.
      • " -"
    • 'Cancel' will not change anything. If you proceed to print after " -"clicking 'Cancel', the job will print with the default settings of " -"this queue.
    " -"

    Note. The number of available job options depends strongly on the " -"actual driver used for your print queue. 'Raw' " -"queues do not have a driver or a PPD. For raw queues this tab page is not " -"loaded by TDEPrint, and thus is not present in the kprinter dialog.

    " -msgstr "" +#: kpgeneralpage.cpp:88 lpd/lpdtools.cpp:29 +msgid "US Legal" +msgstr "US Legal" -#: driverview.cpp:71 -msgid "" -" List of Possible Values for given Option (from PPD). " -"

    The lower pane of this dialog page contains all possible values of the " -"printoption highlighted above, as laid down in the printer's description file " -"(PostScript Printer Description == 'PPD')

    " -"

    Select the value you want and proceed.

    " -"

    Then use one of the pushbuttons below to leave this dialog:

    " -"
      " -"
    • 'Save' your settings if you want to re-use them in your next " -"job(s) too. 'Save' will store your settings permanently until you " -"change them again.
      • . " -"
    • Click 'OK' if you want to use your selected settings just once, " -"for the next print job. 'OK' will forget your current settings when " -"kprinter is closed again, and will start next time with your previous " -"defaults.
      • " -"
    • 'Cancel' will not change anything. If you proceed to print after " -"clicking 'Cancel', the job will print with the default settings of " -"this queue.
    " -"

    Note. The number of available job options depends strongly on the " -"actual driver used for your print queue. 'Raw' " -"queues do not have a driver or a PPD. For raw queues this tab page is not " -"loaded by TDEPrint, and thus is not present in the kprinter dialog.

    " -msgstr "" +#: kpgeneralpage.cpp:89 lpd/lpdtools.cpp:28 +msgid "Ledger" +msgstr "Ledger" -#: kprinter.cpp:280 -msgid "Initialization..." -msgstr "Válbmemin …" +#: kpgeneralpage.cpp:90 +msgid "Folio" +msgstr "Folio" -#: kprinter.cpp:283 kprinter.cpp:909 -#, c-format -msgid "Generating print data: page %1" -msgstr "Ráhkadeamen čálihandáhtaid: Siidu %1" +#: kpgeneralpage.cpp:91 +msgid "US #10 Envelope" +msgstr "Konfaluhtta US #10" + +#: kpgeneralpage.cpp:92 +msgid "ISO DL Envelope" +msgstr "Konfaluhtta ISO DL" + +#: kpgeneralpage.cpp:93 +msgid "Tabloid" +msgstr "Tabloid" + +#: kpgeneralpage.cpp:94 +msgid "ISO A3" +msgstr "ISO A3" + +#: kpgeneralpage.cpp:95 +msgid "ISO A2" +msgstr "ISO A2" -#: kprinter.cpp:429 -msgid "Previewing..." -msgstr "Ovdačájeheapmi …" +#: kpgeneralpage.cpp:96 +msgid "ISO A1" +msgstr "ISO A1" -#: tdeprintd.cpp:158 kprinter.cpp:690 -#, c-format -msgid "" -"

    A print error occurred. Error message received from system:

    " -"
    %1" -msgstr "

    Čálihanmeattáhus. Meattáhusdieđu vuogádagas:


    %1" +#: kpgeneralpage.cpp:97 +msgid "ISO A0" +msgstr "ISO A0" -#: foomatic/kfoomaticprinterimpl.cpp:51 lpdunix/klpdunixprinterimpl.cpp:72 -msgid "" -"No valid print executable was found in your path. Check your installation." -msgstr "" -"Ii gávdnan gustojeaddji čálihangohččun ohcanbálgás (PATH). Dárkkis " -"sajáiduhttima." +#: kpgeneralpage.cpp:107 +msgid "Upper Tray" +msgstr "Bajit gárri" -#: foomatic/kmfoomaticmanager.cpp:70 -msgid "This is not a Foomatic printer" -msgstr "Dát ii leat Foomatic-čálán" +#: kpgeneralpage.cpp:108 +msgid "Lower Tray" +msgstr "Vuolit gárri" -#: foomatic/kmfoomaticmanager.cpp:75 -msgid "Some printer information are missing" -msgstr "Váilu muhton čálándieđuid" +#: kpgeneralpage.cpp:109 +msgid "Multi-Purpose Tray" +msgstr "Moanageavahusgárri" -#: kmmanager.cpp:70 -msgid "This operation is not implemented." -msgstr "" +#: kpgeneralpage.cpp:110 +msgid "Large Capacity Tray" +msgstr "Allaáhppáseš-gárri" -#: kmmanager.cpp:169 -msgid "Unable to locate test page." -msgstr "Ii gávdnan geahččalansiiddu." +#: kpgeneralpage.cpp:114 +msgid "Normal" +msgstr "Dábálaš" -#: kmmanager.cpp:449 -msgid "Can't overwrite regular printer with special printer settings." -msgstr "" +#: kpgeneralpage.cpp:115 +msgid "Transparency" +msgstr "Čađačuovgi" -#: kmmanager.cpp:478 -#, c-format -msgid "Parallel Port #%1" -msgstr "Bálddalasverrát %1" +#: kpgeneralpage.cpp:124 +msgid "" +" " +"

    \"General\"

    " +"

    This dialog page contains general print job settings. General " +"settings are applicable to most printers, most jobs and most job file types. " +"

    To get more specific help, enable the \"WhatsThis\" cursor and click on any " +"of the text labels or GUI elements of this dialog. " +msgstr "" -#: kmmanager.cpp:486 kmmanager.cpp:502 kxmlcommand.cpp:661 -#, c-format -msgid "Unable to load TDE print management library: %1" +#: kpgeneralpage.cpp:132 +msgid "" +" " +"

    Page size: Select paper size to be printed on from the drop-down " +"menu.

    " +"

    The exact list of choices depends on the printer driver (\"PPD\") you have " +"installed.

    " +"
    " +"
    " +"

    Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"

        -o PageSize=...         # examples: \"A4\" or \"Letter\"

    " +"    " msgstr "" -#: kmmanager.cpp:491 kxmlcommand.cpp:669 -msgid "Unable to find wizard object in management library." +#: kpgeneralpage.cpp:145 +msgid "" +" " +"

    Paper type: Select paper type to be printed on from the drop-down " +"menu.

    " +"

    The exact list of choices depends on the printer driver (\"PPD\") you have " +"installed.

    " +"
    " +"
    " +"

    Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"

        -o MediaType=...        # example: \"Transparency\"

    " msgstr "" -#: kmmanager.cpp:507 -msgid "Unable to find options dialog in management library." +#: kpgeneralpage.cpp:158 +msgid "" +" " +"

    Paper source: Select paper source tray for the paper to be printed on " +"from the drop-down menu. " +"

    The exact list of choices depends on the printer driver (\"PPD\") you have " +"installed.

    " +"
    " +"
    " +"

    Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"

        -o InputSlot=...        # examples: \"Lower\" or \"LargeCapacity\"  "
+"

    " msgstr "" -#: kmmanager.cpp:534 -msgid "No plugin information available" +#: kpgeneralpage.cpp:171 +msgid "" +" " +"

    Image Orientation: Orientation of the printed page image on your " +"paper is controlled by the radio buttons. By default, the orientation is " +"Portrait " +"

    You can select 4 alternatives: " +"

      " +"
    • Portrait..Portrait is the default setting.
      • " +"
    • Landscape.
      • " +"
    • Reverse Landscape. Reverse Landscape prints the images upside down. " +"
      • " +"
    • Reverse Portrait. Reverse Portrait prints the image upside " +"down.
    The icon changes according to your selection.

    " +"
    " +"
    " +"

    Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"

        -o orientation-requested=...       # examples: \"landscape\" or "
+"\"reverse-portrait\"

    " msgstr "" -#: lpdunix/kmlpdunixmanager.cpp:210 -msgid "Description unavailable" -msgstr "Válddahus ii leat olamuttus" +#: kpgeneralpage.cpp:192 +msgid "" +" " +"

    Duplex Printing: These controls may be grayed out if your printer " +"does not support duplex printing (i.e. printing on both sides of the " +"sheet). These controls are active if your printer supports duplex printing. " +"

    You can choose from 3 alternatives:

    " +"
      " +"
    • None. This prints each page of the job on one side of the sheets " +"only.
      • " +"
    • Long Side. This prints the job on both sides of the paper sheets. " +"It prints the job in a way so that the backside has the same orientation as the " +"front side if you turn the paper over the long edge. (Some printer drivers " +"name this mode duplex-non-tumbled).
      • " +"
    • Short Side. This prints the job on both sides of the paper sheets. " +"It prints the job so that the backside has the reverse orientation from the " +"front side if you turn the paper over the long edge, but the same orientation, " +"if you turn it over the short edge. (Some printer drivers name this mode " +"duplex-tumbled).
    " +"
    " +"

    Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"

        -o duplex=...       # examples: \"tumble\" or \"two-sided-short-edge\" "
+"

    " +msgstr "" -#: lpdunix/kmlpdunixmanager.cpp:220 lpdunix/kmlpdunixmanager.cpp:271 -#: lpdunix/kmlpdunixmanager.cpp:318 lpdunix/kmlpdunixmanager.cpp:380 -#, c-format -msgid "Remote printer queue on %1" -msgstr "Gáiddus čálihangárgadas dáppe: %1" +#: kpgeneralpage.cpp:218 +msgid "" +" " +"

    Banner Page(s): Select banner(s) to print one or two special sheets " +"of paper just before or after your main job.

    " +"

    Banners may contain some pieces of job information, such as user name, time " +"of printing, job title and more.

    " +"

    Banner pages are useful to separate different jobs more easily, especially " +"in a multi-user environment.

    " +"

    Hint: You can design your own banner pages. To make use of " +"them, just put the banner file into the standard CUPS banners " +"directory (This is usually \"/usr/share/cups/banner/\" " +"Your custom banner(s) must have one of the supported printable formats. " +"Supported formats are ASCII text, PostScript, PDF and nearly any image format " +"such as PNG, JPEG or GIF. Your added banner pages will appear in the drop down " +"menu after a restart of CUPS.

    " +"

    CUPS comes with a selection of banner pages.

    " +"
    " +"
    " +"

    Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"

        -o job-sheets=...       # examples: \"standard\" or \"topsecret\"  "
+"

    " +msgstr "" -#: kmspecialmanager.cpp:53 +#: kpgeneralpage.cpp:240 msgid "" -"A file share/tdeprint/specials.desktop was found in your local TDE directory. " -"This file probably comes from a previous TDE release and should be removed in " -"order to manage global pseudo printers." +" " +"

    Pages per Sheet: You can choose to print more than one page onto " +"each sheet of paper. This is sometimes useful to save paper.

    " +"

    Note 1: the page images get scaled down accordingly to print 2 or 4 " +"pages per sheet. The page image does not get scaled if you print 1 page per " +"sheet (the default setting.). " +"

    Note 2: If you select multiple pages per sheet here, the scaling and " +"re-arranging is done by your printing system. Be aware, that some printers can " +"by themselves print multiple pages per sheet. In this case you find the option " +"in the printer driver settings. Be careful: if you enable multiple pages per " +"sheet in both places, your printout will not look as you intended.

    " +"
    " +"
    " +"

    Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"

        -o number-up=...        # examples: \"2\" or \"4\"

    " msgstr "" -#: kprinterimpl.cpp:156 -msgid "Cannot copy multiple files into one file." -msgstr "Ii sáhte máŋget máŋga fiilla okta fiilii." +#: kpgeneralpage.cpp:264 kpqtpage.cpp:118 +msgid "Page s&ize:" +msgstr "S&iidosturrodat:" -#: kprinterimpl.cpp:165 -msgid "Cannot save print file to %1. Check that you have write access to it." -msgstr "" -"Ii sáhttán vurket čálihanfiilla deike: %1. Dárkkis ahte leat " -"čállinvuoigatvuođat dasa." +#: kpgeneralpage.cpp:268 +msgid "Paper t&ype:" +msgstr "Bábi&ršládja:" -#: kprinterimpl.cpp:233 -#, c-format -msgid "Printing document: %1" -msgstr "Čáliheamen dokumeantta: %1" +#: kpgeneralpage.cpp:272 +msgid "Paper so&urce:" +msgstr "&Bábirgáldu:" -#: kprinterimpl.cpp:251 -#, c-format -msgid "Sending print data to printer: %1" -msgstr "Sáddemin čálihandáhtáid čálánii: %1" +#: kpgeneralpage.cpp:292 +msgid "Duplex Printing" +msgstr "Guovttebealát čáliheapmi" -#: kprinterimpl.cpp:279 -msgid "Unable to start child print process. " -msgstr "Ii sáhttán álggahit vuolleproseassa čáliheapmái. " +#: kpgeneralpage.cpp:295 kpqtpage.cpp:143 +msgid "Pages per Sheet" +msgstr "Siiddut guđege árkii" -#: kprinterimpl.cpp:281 -msgid "" -"The TDE print server (tdeprintd) could not be contacted. Check that this " -"server is running." -msgstr "" -"Ii ožžon oktavuođa TDE-čálihanbálváin (tdeprintd" -"). Dárkkis ahte bálvá lea jođus." +#: kpgeneralpage.cpp:301 kpqtpage.cpp:125 +msgid "&Portrait" +msgstr "&Ceaggu" -#: kprinterimpl.cpp:283 -msgid "" -"_: 1 is the command that is given to\n" -"Check the command syntax:\n" -"%1 " -msgstr "" -"Dárkkis gohččunsyntávssa:\n" -"%1 " +#: kpgeneralpage.cpp:302 kpqtpage.cpp:128 +msgid "&Landscape" +msgstr "&Veallut" -#: kprinterimpl.cpp:290 -msgid "No valid file was found for printing. Operation aborted." -msgstr "" +#: kpgeneralpage.cpp:303 +msgid "&Reverse landscape" +msgstr "Veallu &maŋosguvlui" + +#: kpgeneralpage.cpp:304 +msgid "R&everse portrait" +msgstr "Ceakku &maŋosguvlui" -#: kprinterimpl.cpp:325 +#: kpgeneralpage.cpp:309 msgid "" -"

    Unable to perform the requested page selection. The filter psselect " -"cannot be inserted in the current filter chain. See Filter " -"tab in the printer properties dialog for further information.

    " -msgstr "" - -#: kprinterimpl.cpp:355 -msgid "

    Could not load filter description for %1.

    " +"_: duplex orientation\n" +"&None" msgstr "" -#: kprinterimpl.cpp:371 +#: kpgeneralpage.cpp:310 msgid "" -"

    Error while reading filter description for %1" -". Empty command line received.

    " +"_: duplex orientation\n" +"Lon&g side" msgstr "" -#: kprinterimpl.cpp:385 +#: kpgeneralpage.cpp:311 msgid "" -"The MIME type %1 is not supported as input of the filter chain (this may happen " -"with non-CUPS spoolers when performing page selection on a non-PostScript " -"file). Do you want TDE to convert the file to a supported format?

    " +"_: duplex orientation\n" +"S&hort side" msgstr "" -#: kprinterimpl.cpp:389 kprinterimpl.cpp:509 -msgid "Convert" -msgstr "Konvertere" - -#: kprinterimpl.cpp:399 -msgid "Select MIME Type" -msgstr "Vállje MIME-šlája" - -#: kprinterimpl.cpp:400 -msgid "Select the target format for the conversion:" -msgstr "" +#: kpgeneralpage.cpp:323 +msgid "S&tart:" +msgstr "Ál&gu:" -#: kprinterimpl.cpp:404 kprinterimpl.cpp:430 -msgid "Operation aborted." -msgstr "Bargu gaskkalduhttojuvvon." +#: kpgeneralpage.cpp:324 +msgid "En&d:" +msgstr "Loah&ppa:" -#: kprinterimpl.cpp:410 -msgid "No appropriate filter found. Select another target format." -msgstr "" +#: kpfileselectpage.cpp:33 +msgid "&Files" +msgstr "&Fiillat" -#: kprinterimpl.cpp:423 +#: kpqtpage.cpp:70 msgid "" -"Operation failed with message:" -"
    %1" -"
    Select another target format.    " -msgstr "" - -#: kprinterimpl.cpp:441 -msgid "Filtering print data" -msgstr "Sillemin čálihandáhta" - -#: kprinterimpl.cpp:445 -msgid "Error while filtering. Command was: %1." +" Selection of color mode: You can choose between 2 options: " +"
      " +"
    • Color and
      • " +"
    • Grayscale
    Note: This selection field may be grayed " +"out and made inactive. This happens if TDEPrint can not retrieve enough " +"information about your print file. In this case the embedded color- or " +"grayscale information of your printfile, and the default handling of the " +"printer take precedence.     " msgstr "" -#: kprinterimpl.cpp:487 -msgid "The print file is empty and will be ignored:

    %1

    " +#: kpqtpage.cpp:79 +msgid "" +" Selection of page size: Select paper size to be printed on from " +"the drop-down menu. " +"

    The exact list of choices depends on the printer driver (\"PPD\") you have " +"installed. " msgstr "" -#: kprinterimpl.cpp:497 +#: kpqtpage.cpp:84 msgid "" -"The file format %1 is not directly supported by the current " -"print system. You now have 3 options: " -"

      " -"
    • TDE can attempt to convert this file automatically to a supported format. " -"(Select Convert)
      • " -"
    • You can try to send the file to the printer without any conversion. " -"(Select Keep)
      • " -"
    • You can cancel the printjob. (Select Cancel)
    " -"Do you want TDE to attempt and convert this file to %2?    " +" Selection of pages per sheet: You can choose to print more than " +"one page onto each sheet of paper. This is sometimes useful to save paper. " +"

    Note 1: the page images get scaled down accordingly to print 2 or 4 " +"pages per sheet. The page image does not get scaled if you print 1 page per " +"sheet (the default setting.). " +"

    Note 2: If you select multiple pages per sheet here, the scaling and " +"re-arranging is done by your printing system. " +"

    Note 3, regarding \"Other\": You cannot really select Other " +"as the number of pages to print on one sheet.\"Other\" is checkmarked here for " +"information purposes only. " +"

    To select 8, 9, 16 or other numbers of pages per sheet: " +"

      " +"
    • go to the tab headlined \"Filter\"
      • " +"
    • enable the Multiple Pages per Sheet filter
      • " +"
    • and configure it (bottom-most button on the right of the \"Filters\" tab). " +"
    " msgstr "" -#: kprinterimpl.cpp:518 +#: kpqtpage.cpp:102 msgid "" -"No appropriate filter was found to convert the file format %1 into %2." -"
    " -"
      " -"
    • Go to System Options -> Commands to look through the list of " -"possible filters. Each filter executes an external program.
      • " -"
    • See if the required external program is available.on your system.
    " -"    " +" Selection of image orientation: Orientation of the printed " +"pageimage on your paper is controlled by the radio buttons. By default, the " +"orientation is Portrait " +"

    You can select 2 alternatives: " +"

      " +"
    • Portrait..Portrait is the default setting.
      • " +"
    • Landscape.
    The icon changes according to your " +"selection.     " msgstr "" -#: kpgeneralpage.cpp:85 -msgid "ISO A4" -msgstr "ISO A4" +#: kpqtpage.cpp:113 +msgid "Print Format" +msgstr "Čálihanformáhtta" -#: kpgeneralpage.cpp:89 -msgid "Folio" -msgstr "Folio" +#: kpqtpage.cpp:123 +msgid "Color Mode" +msgstr "Ivdnedoaibmanvuohki" -#: kpgeneralpage.cpp:90 -msgid "US #10 Envelope" -msgstr "Konfaluhtta US #10" +#: kpqtpage.cpp:135 +msgid "Colo&r" +msgstr "Iv&dni" -#: kpgeneralpage.cpp:91 -msgid "ISO DL Envelope" -msgstr "Konfaluhtta ISO DL" +#: kpqtpage.cpp:138 +msgid "&Grayscale" +msgstr "&Ránesivnnit" -#: kpgeneralpage.cpp:92 -msgid "Tabloid" -msgstr "Tabloid" +#: kpqtpage.cpp:151 +msgid "Ot&her" +msgstr "&Eará" -#: kpgeneralpage.cpp:93 -msgid "ISO A3" -msgstr "ISO A3" +#: lpdunix/kmlpdunixmanager.cpp:210 +msgid "Description unavailable" +msgstr "Válddahus ii leat olamuttus" -#: kpgeneralpage.cpp:94 -msgid "ISO A2" -msgstr "ISO A2" +#: lpdunix/kmlpdunixmanager.cpp:220 lpdunix/kmlpdunixmanager.cpp:271 +#: lpdunix/kmlpdunixmanager.cpp:318 lpdunix/kmlpdunixmanager.cpp:380 +#, c-format +msgid "Remote printer queue on %1" +msgstr "Gáiddus čálihangárgadas dáppe: %1" -#: kpgeneralpage.cpp:95 -msgid "ISO A1" -msgstr "ISO A1" +#: kprinterpropertydialog.cpp:78 kprinterpropertydialog.cpp:138 +msgid "Printer Configuration" +msgstr "Heivet čálána" -#: kpgeneralpage.cpp:96 -msgid "ISO A0" -msgstr "ISO A0" +#: kprinterpropertydialog.cpp:138 +msgid "No configurable options for that printer." +msgstr "Ii sáhte heivehit dien čálána." -#: kpgeneralpage.cpp:106 -msgid "Upper Tray" -msgstr "Bajit gárri" +#: kmvirtualmanager.cpp:161 +msgid "" +"You are about to set a pseudo-printer as your personal default. This " +"setting is specific to TDE and will not be available outside TDE applications. " +"Note that this will only make your personal default printer as undefined for " +"non-TDE applications and should not prevent you from printing normally. Do you " +"really want to set %1 as your personal default?" +msgstr "" -#: kpgeneralpage.cpp:107 -msgid "Lower Tray" -msgstr "Vuolit gárri" +#: rlpr/kmrlprmanager.cpp:47 rlpr/kmwrlpr.cpp:85 +msgid "Empty host name." +msgstr "Guorus guossoheaddjenamma." -#: kpgeneralpage.cpp:108 -msgid "Multi-Purpose Tray" -msgstr "Moanageavahusgárri" +#: rlpr/kmrlprmanager.cpp:49 rlpr/kmwrlpr.cpp:87 +msgid "Empty queue name." +msgstr "Guorus gárgadasnamma." -#: kpgeneralpage.cpp:109 -msgid "Large Capacity Tray" -msgstr "Allaáhppáseš-gárri" +#: rlpr/kmrlprmanager.cpp:63 +msgid "Printer not found." +msgstr "Čálán ii gávdnon." -#: kpgeneralpage.cpp:113 -msgid "Normal" -msgstr "Dábálaš" +#: rlpr/kmrlprmanager.cpp:75 +msgid "Not implemented yet." +msgstr "" -#: kpgeneralpage.cpp:114 -msgid "Transparency" -msgstr "Čađačuovgi" +#: rlpr/kmconfigproxy.cpp:29 +msgid "Proxy" +msgstr "Gaskabálvá" -#: kpgeneralpage.cpp:123 -msgid "" -" " -"

    \"General\"

    " -"

    This dialog page contains general print job settings. General " -"settings are applicable to most printers, most jobs and most job file types. " -"

    To get more specific help, enable the \"WhatsThis\" cursor and click on any " -"of the text labels or GUI elements of this dialog. " -msgstr "" +#: rlpr/kmconfigproxy.cpp:30 +msgid "RLPR Proxy Server Settings" +msgstr "RPLR-gaskabálvvá heivehusat" -#: kpgeneralpage.cpp:131 -msgid "" -" " -"

    Page size: Select paper size to be printed on from the drop-down " -"menu.

    " -"

    The exact list of choices depends on the printer driver (\"PPD\") you have " -"installed.

    " -"
    " -"
    " -"

    Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"

        -o PageSize=...         # examples: \"A4\" or \"Letter\"

    " -"    " -msgstr "" +#: rlpr/kmproprlpr.cpp:49 rlpr/kmwrlpr.cpp:50 +msgid "Remote LPD Queue Settings" +msgstr "Gáiddus LPD-gárgadasaid heivehusat" + +#: rlpr/kmproxywidget.cpp:32 +msgid "Proxy Settings" +msgstr "Gaskabálváheivehusat" + +#: rlpr/kmproxywidget.cpp:36 +msgid "&Use proxy server" +msgstr "&Geavat gaskabálvá" + +#: rlpr/kmwrlpr.cpp:124 +msgid "Remote queue %1 on %2" +msgstr "Fierpmádatgárgadas %1 dáppe %2" + +#: rlpr/kmwrlpr.cpp:199 +msgid "No Predefined Printers" +msgstr "Eai leat ovdagihtii meroštuvvon čálánat" -#: kpgeneralpage.cpp:144 +#: lpd/klpdprinterimpl.cpp:46 rlpr/krlprprinterimpl.cpp:53 msgid "" -" " -"

    Paper type: Select paper type to be printed on from the drop-down " -"menu.

    " -"

    The exact list of choices depends on the printer driver (\"PPD\") you have " -"installed.

    " -"
    " -"
    " -"

    Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"

        -o MediaType=...        # example: \"Transparency\"

    " +"The %1 executable could not be found in your path. Check your " +"installation." msgstr "" +"Prográmmafiila %1 ii gávdnon du ohcanbálgás. Dárkkis du sajáiduhttima." -#: kpgeneralpage.cpp:157 -msgid "" -" " -"

    Paper source: Select paper source tray for the paper to be printed on " -"from the drop-down menu. " -"

    The exact list of choices depends on the printer driver (\"PPD\") you have " -"installed.

    " -"
    " -"
    " -"

    Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"

        -o InputSlot=...        # examples: \"Lower\" or \"LargeCapacity\"  "
-"

    " +#: rlpr/krlprprinterimpl.cpp:73 +msgid "The printer is incompletely defined. Try to reinstall it." msgstr "" -#: kpgeneralpage.cpp:170 +#: kmspecialmanager.cpp:53 msgid "" -" " -"

    Image Orientation: Orientation of the printed page image on your " -"paper is controlled by the radio buttons. By default, the orientation is " -"Portrait " -"

    You can select 4 alternatives: " -"

      " -"
    • Portrait..Portrait is the default setting.
      • " -"
    • Landscape.
      • " -"
    • Reverse Landscape. Reverse Landscape prints the images upside down. " -"
      • " -"
    • Reverse Portrait. Reverse Portrait prints the image upside " -"down.
    The icon changes according to your selection.

    " -"
    " -"
    " -"

    Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"

        -o orientation-requested=...       # examples: \"landscape\" or "
-"\"reverse-portrait\"

    " +"A file share/tdeprint/specials.desktop was found in your local KDE directory. " +"This file probably comes from a previous KDE release and should be removed in " +"order to manage global pseudo printers." msgstr "" -#: kpgeneralpage.cpp:191 -msgid "" -" " -"

    Duplex Printing: These controls may be grayed out if your printer " -"does not support duplex printing (i.e. printing on both sides of the " -"sheet). These controls are active if your printer supports duplex printing. " -"

    You can choose from 3 alternatives:

    " -"
      " -"
    • None. This prints each page of the job on one side of the sheets " -"only.
      • " -"
    • Long Side. This prints the job on both sides of the paper sheets. " -"It prints the job in a way so that the backside has the same orientation as the " -"front side if you turn the paper over the long edge. (Some printer drivers " -"name this mode duplex-non-tumbled).
      • " -"
    • Short Side. This prints the job on both sides of the paper sheets. " -"It prints the job so that the backside has the reverse orientation from the " -"front side if you turn the paper over the long edge, but the same orientation, " -"if you turn it over the short edge. (Some printer drivers name this mode " -"duplex-tumbled).
    " -"
    " -"

    Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"

        -o duplex=...       # examples: \"tumble\" or \"two-sided-short-edge\" "
-"

    " -msgstr "" +#: kmjob.cpp:114 +msgid "Queued" +msgstr "Gárgaduvvon" -#: kpgeneralpage.cpp:217 -msgid "" -" " -"

    Banner Page(s): Select banner(s) to print one or two special sheets " -"of paper just before or after your main job.

    " -"

    Banners may contain some pieces of job information, such as user name, time " -"of printing, job title and more.

    " -"

    Banner pages are useful to separate different jobs more easily, especially " -"in a multi-user environment.

    " -"

    Hint: You can design your own banner pages. To make use of " -"them, just put the banner file into the standard CUPS banners " -"directory (This is usually \"/usr/share/cups/banner/\" " -"Your custom banner(s) must have one of the supported printable formats. " -"Supported formats are ASCII text, PostScript, PDF and nearly any image format " -"such as PNG, JPEG or GIF. Your added banner pages will appear in the drop down " -"menu after a restart of CUPS.

    " -"

    CUPS comes with a selection of banner pages.

    " -"
    " -"
    " -"

    Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"

        -o job-sheets=...       # examples: \"standard\" or \"topsecret\"  "
-"

    " -msgstr "" +#: kmjob.cpp:117 +msgid "Held" +msgstr "Dollejuvvon" -#: kpgeneralpage.cpp:239 -msgid "" -" " -"

    Pages per Sheet: You can choose to print more than one page onto " -"each sheet of paper. This is sometimes useful to save paper.

    " -"

    Note 1: the page images get scaled down accordingly to print 2 or 4 " -"pages per sheet. The page image does not get scaled if you print 1 page per " -"sheet (the default setting.). " -"

    Note 2: If you select multiple pages per sheet here, the scaling and " -"re-arranging is done by your printing system. Be aware, that some printers can " -"by themselves print multiple pages per sheet. In this case you find the option " -"in the printer driver settings. Be careful: if you enable multiple pages per " -"sheet in both places, your printout will not look as you intended.

    " -"
    " -"
    " -"

    Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"

        -o number-up=...        # examples: \"2\" or \"4\"

    " -msgstr "" +#: kmjob.cpp:123 +msgid "Canceled" +msgstr "Gaskkalduvvon" -#: kpgeneralpage.cpp:263 kpqtpage.cpp:118 -msgid "Page s&ize:" -msgstr "S&iidosturrodat:" +#: kmjob.cpp:126 +msgid "Aborted" +msgstr "Gaskkalduvvon" -#: kpgeneralpage.cpp:267 -msgid "Paper t&ype:" -msgstr "Bábi&ršládja:" +#: kmjob.cpp:129 +msgid "Completed" +msgstr "Geargan" -#: kpgeneralpage.cpp:271 -msgid "Paper so&urce:" -msgstr "&Bábirgáldu:" +#. i18n: file kprintpreviewui.rc line 13 +#: rc.cpp:9 rc.cpp:21 +#, no-c-format +msgid "&PageMarks" +msgstr "&Siidomearkkat" -#: kpgeneralpage.cpp:291 -msgid "Duplex Printing" -msgstr "Guovttebealát čáliheapmi" +#: kmuimanager.cpp:158 +#, c-format +msgid "Configuration of %1" +msgstr "Heivet %1" -#: kpgeneralpage.cpp:294 kpqtpage.cpp:143 -msgid "Pages per Sheet" -msgstr "Siiddut guđege árkii" +#: ext/kextprinterimpl.cpp:47 +msgid "Empty print command." +msgstr "Guorus čálihangohččun" -#: kpgeneralpage.cpp:300 kpqtpage.cpp:125 -msgid "&Portrait" -msgstr "&Ceaggu" +#: ext/kmextmanager.cpp:41 +msgid "PS_printer" +msgstr "PS_printer" -#: kpgeneralpage.cpp:301 kpqtpage.cpp:128 -msgid "&Landscape" -msgstr "&Veallut" +#: ext/kmextmanager.cpp:43 +msgid "PostScript file generator" +msgstr "PostScript-fiilaráhkadeaddji" -#: kpgeneralpage.cpp:302 -msgid "&Reverse landscape" -msgstr "Veallu &maŋosguvlui" +#: kpposterpage.cpp:42 +msgid " 5. " +msgstr "" -#: kpgeneralpage.cpp:303 -msgid "R&everse portrait" -msgstr "Ceakku &maŋosguvlui" +#: kpposterpage.cpp:46 +msgid "" +" Print Poster (enabled or disabled). " +"

    If you enable this option, you can print posters of different sizes The " +"printout will happen in the form 'tiles' printed on smaller paper " +"sizes, which you can stitch together later. If you enable this option " +"here, the 'Poster Printing' filter will be auto-loaded in the " +"'Filters' tab of this dialog.

    " +"

    This tab is only visible if the external 'poster' " +"utility is discovered by TDEPrint on your system. ['poster' " +"is a commandline utility that enables you to convert PostScript files into " +"tiled printouts which allow for oversized appearance of the stitched-together " +"tiles.]

    " +"

    Note: The standard version of 'poster' will not work. Your system " +"must use a patched version of 'poster'. Ask your operating system vendor to " +"provide a patched version of 'poster' if he does not already.

    " +msgstr "" -#: kpgeneralpage.cpp:308 +#: kpposterpage.cpp:62 msgid "" -"_: duplex orientation\n" -"&None" +" Tile Selection widget " +"

    This GUI element is not only for viewing " +"your selections: it also lets you interactively select the tile(s) you want to " +"print.

    " +"

    Hints " +"

      " +"
    • Click any tile to select it for printing.
      • " +"
    • To select multiple tiles to be printed at once, 'shift-click' " +"on the tiles ('shift-click' means: hold down the [SHIFT]-key on your keyboard " +"and click with the mouse while [SHIFT]-key is held.) Be aware " +"that the order of your clicking is also significant to the order of printing " +"the different tiles.
    Note 1: The order of your selection " +"(and the order for printout of the tiles) is indicated by the contents of the " +"text field below, labelled as 'Tile pages (to be printed):'" +"

    Note 2: By default no tile is selected. Before you can print (a part " +" of) your poster, you must select at least one tile.

    " msgstr "" -#: kpgeneralpage.cpp:309 +#: kpposterpage.cpp:83 msgid "" -"_: duplex orientation\n" -"Lon&g side" +" Poster Size " +"

    Select the poster size you want from the dropdown list.

    " +"Available sizes are all standard paper sizes up to 'A0'. [A0 is the same size " +"as 16 sheets of A4, or '84cm x 118.2cm'.]

    " +"

    Notice, how the little preview window below changes with your change " +"of poster size. It indicates to you how many tiles need to be printed to make " +"the poster, given the selected paper size.

    " +"

    Hint: The little preview window below is not just a passive icon. You " +"can click on its individual tiles to select them for printing. To select " +"multiple tiles to be printed at once, you need to 'shift-click' " +"on the tiles ('shift-click' means: hold down the [SHIFT]-key on your keyboard " +"and click with the mouse while [SHIFT]-key is held.) The order of your " +"clicking is significant to the order of printing the different tiles. The order " +"of your selection (and for the printed tiles) is indicated by the contents of " +"the text field labelled as 'Tile pages (to be printed):'" +"

    Note: By default no tile is selected. Before you can print (a part " +"of) your poster, you must select at least one tile.

    " +msgstr "" + +#: kpposterpage.cpp:102 +msgid "" +" Paper Size " +"

    This field indicates the paper size the poster tiles will be printed on. To " +"select a different paper size for your poster tiles, go to the 'General' tab " +"of this dialog and select one from the dropdown list.

    " +"Available sizes are most standard paper sizes supported by your printer. Your " +"printer's supported paper sizes are read from the printer driver info (as laid " +"down in the 'PPD', the printer description file). " +"Be aware that the 'Paper Size' selected may not be supported by 'poster' " +"(example: 'HalfLetter') while it may well be supported by your printer. " +"If you hit that obstacle, simply use another, supported Paper Size, like 'A4' " +"or 'Letter'. " +"

    Notice, how the little preview window below changes with your change " +"of paper size. It indicates how many tiles need to be printed to make up the " +"poster, given the selected paper and poster size.

    " +"

    Hint: The little preview window below is not just a passive icon. You " +"can click on its individual tiles to select them for printing. To select " +"multiple tiles to be printed at once, you need to 'shift-click' " +"on the tiles ('shift-click' means: hold down the [SHIFT]-key on your keyboard " +"and click with the mouse while [SHIFT]-key is held.) The order of your " +"clicking is significant to the order of printing the different tiles. The order " +"of your selection (and for the printed tiles) is indicated by the contents of " +"the text field labelled as 'Tile pages (to be printed):'" +"

    Note: By default no tile is selected. Before you can print (a part " +"of) your poster, you must select at least one tile.

    " +msgstr "" + +#: kpposterpage.cpp:126 +msgid "" +" Cut Margin selection " +"

    Slider and spinbox let you determine a 'cut margin' " +"which will be printed onto each tile of your poster to help you cut the pieces " +"as needed.

    " +"

    Notice, how the little preview window above changes with your change " +"of cut margins. It indicates to you how much space the cut margins will take " +"away from each tile. " +"

    Be aware, that your cut margins need to be equal to or greater than " +"the margins your printer uses. The printer's capabilities are described in the " +"'ImageableArea' keywords of its driver PPD file.

    " msgstr "" -#: kpgeneralpage.cpp:310 +#: kpposterpage.cpp:137 msgid "" -"_: duplex orientation\n" -"S&hort side" +" Order and number of tile pages to be printed " +"

    This field displays and sets the individual tiles to be printed, as well as " +"the order for their printout.

    You can file the field with 2 different " +"methods: " +"
      " +"
    • Either use the interactive thumbnail preview above and '[SHIFT]-click' on " +"the tiles.
      • " +"
    • Or edit this text field accordingly.
    " +"

    When editing the field, you can use a '3-7' syntax instead of a '3,4,5,6,7' " +"one.

    " +"

    Examples:

    " +"
        \"2,3,7,9,3\"  "
+"
        \"1-3,6,8-11\"  "
 msgstr ""
 
-#: kpgeneralpage.cpp:322
-msgid "S&tart:"
-msgstr "Ál&gu:"
+#: kpposterpage.cpp:154
+msgid "Poster"
+msgstr "Plakáhtta"
 
-#: kpgeneralpage.cpp:323
-msgid "En&d:"
-msgstr "Loah&ppa:"
+#: kpposterpage.cpp:156
+msgid "&Print poster"
+msgstr "Čálit &plakáhta"
 
-#: ppdloader.cpp:173
-msgid "(line %1): "
-msgstr "(linnjá %1): "
+#: kpposterpage.cpp:170
+msgid "Poste&r size:"
+msgstr "Plakáhtta&sturrodat:"
 
-#: droptionview.cpp:61
-msgid "Value:"
-msgstr "Árvu:"
+#: kpposterpage.cpp:172
+msgid "Media size:"
+msgstr "Mediasturrodat:"
 
-#: droptionview.cpp:167
-msgid "String value:"
-msgstr "Streaŋgaárvu:"
+#: kpposterpage.cpp:174
+msgid "Pri&nt size:"
+msgstr "Čáli&hansturrodat:"
 
-#: droptionview.cpp:306 droptionview.cpp:341
-msgid "No Option Selected"
+#: kpposterpage.cpp:181
+#, no-c-format
+msgid "C&ut margin (% of media):"
 msgstr ""
 
-#: kmuimanager.cpp:158
-#, c-format
-msgid "Configuration of %1"
-msgstr "Heivet %1"
-
-#: kmprinter.cpp:144
-msgid "(rejecting jobs)"
-msgstr "(hilgo bargguid)"
-
-#: kmprinter.cpp:144
-msgid "(accepting jobs)"
-msgstr "(dohkkeha bargguid)"
-
-#: kprintprocess.cpp:75
-msgid "File transfer failed."
-msgstr "Fiilasirdin filtii."
-
-#: kprintprocess.cpp:81
-msgid "Abnormal process termination (%1)."
+#: kpposterpage.cpp:185
+msgid "&Tile pages (to be printed):"
 msgstr ""
 
-#: kprintprocess.cpp:83
-msgid "%1: execution failed with message:
    %2
    "
+#: kpposterpage.cpp:192
+msgid "Link/unlink poster and print size"
 msgstr ""
 
+#: kpposterpage.cpp:257
+msgid "Unknown"
+msgstr "Amas"
+
+#: kprinter.cpp:690 tdeprintd.cpp:158
+#, c-format
+msgid ""
+"
    A print error occurred. Error message received from system:
    "
+"
    %1"
+msgstr "
    Čálihanmeattáhus. Meattáhusdieđu vuogádagas:

    %1"
+
 #: tdeprintd.cpp:176
 msgid ""
 "Some of the files to print are not readable by the TDE print daemon. This may "
@@ -4949,11 +5086,70 @@ msgstr "Čálihanvuogádat"
 msgid "Authentication failed (user name=%1)"
 msgstr ""
 
-#. i18n: file kprintpreviewui.rc line 13
-#: rc.cpp:9 rc.cpp:21
-#, no-c-format
-msgid "&PageMarks"
-msgstr "&Siidomearkkat"
+#: kprinter.cpp:280
+msgid "Initialization..."
+msgstr "Válbmemin …"
+
+#: kprinter.cpp:283 kprinter.cpp:909
+#, c-format
+msgid "Generating print data: page %1"
+msgstr "Ráhkadeamen čálihandáhtaid: Siidu %1"
+
+#: kprinter.cpp:429
+msgid "Previewing..."
+msgstr "Ovdačájeheapmi …"
+
+#: driverview.cpp:47
+msgid ""
+"   List of Driver Options (from PPD).  "
+"
    The upper pane of this dialog page contains all printjob options as laid  "
+"down in the printer's description file (PostScript Printer Description == "
+"'PPD') 
     "
+"
    Click on any item in the list and watch the lower pane of this dialog page  "
+"display the available values. 
      "
+"
    Set the values as needed. Then use one of the pushbuttons below to "
+"proceed:
      "
+"
        "
+"
    • 'Save' your settings if you want to re-use  them in your next "
+"job(s) too. 'Save' will store your settings permanently until  you "
+"change them again. 
      • . "
+"
    • Click 'OK' (without a prior click on 'Save'"
+", if you want to use  your selected settings just once, for the next print job. "
+"'OK'  will forget your current settings when kprinter is closed again, "
+"and will start next time  with the previously saved defaults. 
      •  "
+"
    • 'Cancel' will not change anything. If you proceed to print after "
+"clicking  'Cancel', the job will print with the default settings of "
+"this queue.  
     "
+"
    Note. The number of available job options depends strongly on the "
+"actual  driver used for your print queue. 'Raw' "
+"queues do not have a driver or a   PPD. For raw queues this tab page is not "
+"loaded by TDEPrint, and thus is not present  in the kprinter dialog.
          "
+msgstr ""
+
+#: driverview.cpp:71
+msgid ""
+"   List of Possible Values for given Option (from PPD).  "
+"
    The lower pane of this dialog page contains all possible values of the "
+"printoption  highlighted above, as laid  down in the printer's description file "
+"(PostScript Printer Description == 'PPD') 
     "
+"
    Select the value you want and proceed. 
      "
+"
    Then use one of the pushbuttons below to leave this dialog:
      "
+"
        "
+"
    • 'Save' your settings if you want to re-use  them in your next "
+"job(s) too. 'Save' will store your settings permanently until  you "
+"change them again. 
      • . "
+"
    • Click 'OK' if you want to use your selected settings just once, "
+"for the  next print job. 'OK'  will forget your current settings when "
+"kprinter is closed again, and will start next time  with your previous "
+"defaults. 
      •  "
+"
    • 'Cancel' will not change anything. If you proceed to print after "
+"clicking  'Cancel', the job will print with the default settings of "
+"this queue.  
     "
+"
    Note. The number of available job options depends strongly on the "
+"actual  driver used for your print queue. 'Raw' "
+"queues do not have a driver or a   PPD. For raw queues this tab page is not "
+"loaded by TDEPrint, and thus is not present  in the kprinter dialog.
          "
+msgstr ""
 
 #: kpcopiespage.cpp:46
 msgid ""
@@ -4975,7 +5171,7 @@ msgstr ""
 #: kpcopiespage.cpp:55
 msgid ""
 " Current Page: Select \"Current\" "
-"if you want  to print the page currently visible in your TDE application.
     "
+"if you want  to print the page currently visible in your KDE application.
     "
 "
    Note: this field is disabled if you print from non-TDE applications "
 "like Mozilla or OpenOffice.org, since here TDEPrint has no means to determine "
 "which document page you are currently viewing.
    "
@@ -5165,410 +5361,286 @@ msgstr "&Siidočoakkáldat:"
 msgid "Pages"
 msgstr "Siiddut"
 
-#: kprintpreview.cpp:137
-msgid "Do you want to continue printing anyway?"
-msgstr "Háliidatgo liikká joatkit čáliheames?"
-
-#: kprintpreview.cpp:145 kprintpreview.cpp:224
-msgid "Print Preview"
-msgstr "Ovdačájeheapmi"
-
-#: kprintpreview.cpp:275
-msgid ""
-"The preview program %1 cannot be found. Check that the program is correctly "
-"installed and located in a directory included in your PATH environment "
-"variable."
-msgstr ""
-"Ii gávdnan ovdačájehanprográmma %1. Dárkkis ahte prográmma lea "
-"sajáiduhttojuvvon ja lea muhton ozus mii gávdno PATH-birasvariábelis."
-
-#: kprintpreview.cpp:300
-msgid ""
-"Preview failed: neither the internal TDE PostScript viewer (KGhostView) nor any "
-"other external PostScript viewer could be found."
-msgstr ""
-"Ovdačájeheapmi filtii: Ii gávdnan TDE:a siskkildas PostScript-čájeheaddji "
-"(KGhostView) iige muhton eará olgguldas PostScript-čájeheaddji."
-
-#: kprintpreview.cpp:304
-#, c-format
+#: plugincombobox.cpp:33
 msgid ""
-"Preview failed: TDE could not find any application to preview files of type %1."
+" Print Subsystem Selection "
+"
    This combo box shows (and lets you select) a print subsystem to be used by "
+"TDEPrint. (This print subsystem must, of course, be installed inside your "
+"Operating System.) TDEPrint usually auto-detects the correct print subsystem by "
+"itself upon first startup. Most Linux distributions have \"CUPS\", the "
+"Common UNIX Printing System. "
 msgstr ""
-"Ovdačájeheapmi filtii: TDE ii gávdnan prográmma mainna čájeha fiillat mas lea "
-"šládja: %1."
-
-#: kprintpreview.cpp:314
-#, c-format
-msgid "Preview failed: unable to start program %1."
-msgstr "Ovdačájeheapmi filtii: Ii sáhttán álggahit prográmma %1."
-
-#: kprintpreview.cpp:319
-msgid "Do you want to continue printing?"
-msgstr "Háliidatgo joatkit čállimis?"
-
-#: kmfactory.cpp:221
-msgid "There was an error loading %1. The diagnostic is:
    %2
    "
-msgstr "Meattáhus vieččadettiin %1. Diagnosa lea:
    %2
    "
 
-#: kpdriverpage.cpp:48
-#, fuzzy
-msgid ""
-"Some options selected are in conflict. You must resolve these conflicts "
-"before continuing. See Driver Settings tab for detailed information."
-msgstr ""
-"Muhton molssaeavttut eai heive oktii. Fertet čoavdit dán ovdalgo joatkkát. "
-"Geahčča Erenoamáš vai oažžut bienálaš dieđuid."
+#: plugincombobox.cpp:45
+msgid "Print s&ystem currently used:"
+msgstr "Čálihan&vuogádat mii geavahuvvo:"
 
-#: posterpreview.cpp:115
+#: plugincombobox.cpp:91
 msgid ""
-"Poster preview not available. Either the poster "
-"executable is not properly installed, or you don't have the required version."
+" Current Connection "
+"
    This line shows which CUPS server your PC is currently connected to for "
+"printing and retrieving printer info. To switch to a different CUPS server, "
+"click \"System Options\", then select \"Cups server\" and fill in the required "
+"info. "
 msgstr ""
-"Ii sáhte čájehit plakáhta ovdagihtii. Sáhttá leat ahte poster "
-"prográmma ii leat sajáiduhttojuvvon dahje lea boastu veršuvnnas."
-
-#: kprinterpropertydialog.cpp:78 kprinterpropertydialog.cpp:138
-msgid "Printer Configuration"
-msgstr "Heivet čálána"
-
-#: kprinterpropertydialog.cpp:138
-msgid "No configurable options for that printer."
-msgstr "Ii sáhte heivehit dien čálána."
 
-#: marginpreview.cpp:135
-msgid "No preview available"
-msgstr "Ovdačájeheapmi ii leat olamuttus"
-
-#: kpfileselectpage.cpp:33
-msgid "&Files"
-msgstr "&Fiillat"
-
-#: marginwidget.cpp:37
+#: tdefilelist.cpp:42
 msgid ""
-"   "
-"
    Top Margin
    .  "
-"
    This spinbox/text edit field lets you control the top margin of your "
-"printout if the printing  application does not define its margins internally. "
-"
      "
-"
    The setting works for instance for ASCII text file printing, or for printing "
-"from KMail and  and Konqueror.. 
     "
-"
    Note:
    This margin setting is not intended for KOffice or "
-"OpenOffice.org printing,  because these applications (or rather their users) "
-"are expected to do it by themselves.  It also does not work for PostScript or "
-"PDF file, which in most cases have their margins hardcoded  internally.
      "
-"
      "
-"
      "
-"
    Additional hint for power users: This TDEPrint GUI element "
-"matches  with the CUPS commandline job option parameter:  "
-"
        -o page-top=...      # use values from \"0\" or higher. \"72\" is "
-"equal to 1 inch.  
     
          "
+"  Add File button "
+"
    This button calls the 'File Open' dialog to let you select a file "
+"for printing. Note, that  "
+"
      "
+"
    • you can select ASCII or International Text, PDF, PostScript, JPEG, TIFF, "
+"PNG, GIF and many other graphic formats. "
+"
    • you can select various files from different paths and send them as one "
+"\"multi-file job\" to the printing system. 
         "
 msgstr ""
 
-#: marginwidget.cpp:57
+#: tdefilelist.cpp:54
 msgid ""
-"   "
-"
    Bottom Margin
    .  "
-"
    This spinbox/text edit field lets you control the bottom margin of your "
-"printout if the printing  application does not define its margins internally. "
-"
      "
-"
    The setting works for instance for ASCII text file printing, or for printing "
-"from KMail and  and Konqueror. 
     "
-"
    Note:
    This margin setting is not intended for KOffice or "
-"OpenOffice.org printing,  because these applications (or rather their users) "
-"are expected to do it by themselves.  It also does not work for PostScript or "
-"PDF file, which in most cases have their margins hardcoded  internally.
      "
-"
      "
-"
      "
-"
    Additional hint for power users: This TDEPrint GUI element "
-"matches  with the CUPS commandline job option parameter:  "
-"
        -o page-bottom=...      # use values from \"0\" or higher. \"72\" is "
-"equal to 1 inch.  
         "
+"  Remove File button "
+"
    This button removes the highlighted file from the list of to-be-printed "
+"files. "
 msgstr ""
 
-#: marginwidget.cpp:76
+#: tdefilelist.cpp:59
 msgid ""
-"   "
-"
    Left Margin
    .  "
-"
    This spinbox/text edit field lets you control the left margin of your "
-"printout if the printing  application does not define its margins internally. "
-"
      "
-"
    The setting works for instance for ASCII text file printing, or for printing "
-"from KMail and  and Konqueror. 
     "
-"
    Note:
    This margin setting is not intended for KOffice or "
-"OpenOffice.org printing,  because these applications (or rather their users) "
-"are expected to do it by themselves.  It also does not work for PostScript or "
-"PDF file, which in most cases have their margins hardcoded  internally.
      "
-"
      "
-"
      "
-"
    Additional hint for power users: This TDEPrint GUI element "
-"matches  with the CUPS commandline job option parameter:  "
-"
        -o page-left=...      # use values from \"0\" or higher. \"72\" is "
-"equal to 1 inch.  
         "
+"  Move File Up button "
+"
    This button moves the highlighted file up in the list of files to be "
+"printed.
     "
+"
    In effect, this changes the order of the files' printout.
         "
 msgstr ""
 
-#: marginwidget.cpp:95
+#: tdefilelist.cpp:66
 msgid ""
-"   "
-"
    Right Margin
    .  "
-"
    This spinbox/text edit field lets you control the right margin of your "
-"printout if the printing  application does not define its margins internally. "
-"
      "
-"
    The setting works for instance for ASCII text file printing, or for printing "
-"from KMail and  and Konqueror. 
     "
-"
    Note:
    This margin setting is not intended for KOffice or "
-"OpenOffice.org printing,  because these applications (or rather their users) "
-"are expected to do it by themselves.  It also does not work for PostScript or "
-"PDF file, which in most cases have their margins hardcoded  internally.
      "
-"
      "
-"
      "
-"
    Additional hint for power users: This TDEPrint GUI element "
-"matches  with the CUPS commandline job option parameter:  "
-"
        -o page-right=...      # use values from \"0\" or higher. \"72\" is "
-"equal to 1 inch.  
         "
+"  Move File Down button "
+"
    This button moves the highlighted file down in the list of files to be "
+"printed.
     "
+"
    In effect, this changes the order of the files' printout.
         "
 msgstr ""
 
-#: marginwidget.cpp:114
+#: tdefilelist.cpp:73
 msgid ""
-"   "
-"
    Change Measurement Unit
    .  "
-"
    You can change the units of measurement for the page margins here. Select "
-"from Millimeter, Centimeter, Inch or Pixels (1 pixel == 1/72 inch).  
          "
+"  File Open button "
+"
    This button tries to open the highlighted file, so you can view or edit it "
+"before you send it to the printing system.
     "
+"
    If you open files, TDEPrint will use the application matching the MIME type "
+"of the file.
         "
 msgstr ""
 
-#: marginwidget.cpp:121
+#: tdefilelist.cpp:82
 msgid ""
-"   "
-"
    Custom Margins Checkbox
    .  "
-"
    Enable this checkbox if you want to modify the margins of your printouts  "
-"
    You can change margin settings in 4 ways:  "
-"
        "
-"
    • Edit the text fields. 
      •   "
-"
    • Click spinbox arrows. 
      •   "
-"
    • Scroll wheel of wheelmouses. 
      •   "
-"
    • Drag margins in preview frame with mouse. 
      •   
      Note: "
-"The margin setting does not work if you load such files directly into  "
-"kprinter, which have their print margins hardcoded internally, like as most  "
-"PDF or PostScript files. It works for all ASCII text files however. It also may "
-"not  work with non-TDE applications which fail to  fully utilize the TDEPrint "
-"framework, such as OpenOffice.org. 
          "
+"  File List view "
+"
    This list displays all the files you selected for printing. You can see the "
+"file name(s), file path(s) and the file (MIME) type(s) as determined by "
+"TDEPrint. You may re-arrange the  initial order of the list  with the help of "
+"the arrow buttons on the right.
     "
+"
    The files will be printed as a single job, in the same order as displayed in "
+"the list.
     "
+"
    Note: You can select multiple files. The files may be in multiple "
+"locations. The files may be of multiple MIME types. The buttons on the right "
+"side let you add more files, remove already selected files from the list,  "
+"re-order the list (by moving files up or down), and open files. If you open "
+"files, TDEPrint will use the application matching the MIME type of the file.
     "
+"    "
 msgstr ""
 
-#: marginwidget.cpp:138
+#: tdefilelist.cpp:103
+msgid "Path"
+msgstr "Bálggis"
+
+#: tdefilelist.cpp:115
+msgid "Add file"
+msgstr "Lasit fiilla"
+
+#: tdefilelist.cpp:121
+msgid "Remove file"
+msgstr "Váldde fiilla eret"
+
+#: tdefilelist.cpp:128
+msgid "Open file"
+msgstr "Raba fiilla"
+
+#: tdefilelist.cpp:149
 msgid ""
-"   "
-"
    \"Drag-your-Margins\" 
    .  "
-"
    Use your mouse to drag and set each margin on this little preview window. "
-"
          "
+"Drag file(s) here or use the button to open a file dialog. Leave empty for "
+"<STDIN>."
 msgstr ""
 
-#: marginwidget.cpp:148
-msgid "&Use custom margins"
-msgstr "Geavat &iešmeroštuvvon siidoravddaid"
+#: droptionview.cpp:61
+msgid "Value:"
+msgstr "Árvu:"
 
-#: marginwidget.cpp:158
-msgid "&Top:"
-msgstr "&Badjin:"
+#: droptionview.cpp:167
+msgid "String value:"
+msgstr "Streaŋgaárvu:"
 
-#: marginwidget.cpp:159
-msgid "&Bottom:"
-msgstr "&Vuollin:"
+#: droptionview.cpp:306 droptionview.cpp:341
+msgid "No Option Selected"
+msgstr ""
 
-#: marginwidget.cpp:160
-msgid "Le&ft:"
-msgstr "G&urut:"
+#: lpd/kmlpduimanager.cpp:44
+msgid "Local printer (parallel, serial, USB)"
+msgstr "Báikkálaš čálán (bálddalas, maŋŋálas, USB)"
 
-#: marginwidget.cpp:161
-msgid "&Right:"
-msgstr "&Olgeš:"
+#: lpd/kmlpduimanager.cpp:46
+msgid "SMB shared printer (Windows)"
+msgstr "SMB-juohkkejuvvon čálán (Windows)"
 
-#: marginwidget.cpp:164
-msgid "Pixels (1/72nd in)"
-msgstr "Govvačuoggát (1/72 duma)"
+#: lpd/kmlpduimanager.cpp:47
+msgid "Network printer (TCP)"
+msgstr "Fierpmádatčálán (TCP)"
 
-#: marginwidget.cpp:167
-msgid "Inches (in)"
-msgstr "Dumat (in)"
+#: lpd/kmlpduimanager.cpp:48
+msgid "File printer (print to file)"
+msgstr "Čálit fiilii"
 
-#: marginwidget.cpp:168
-msgid "Centimeters (cm)"
-msgstr "Centimehtarat (cm)"
+#: lpd/lpdtools.cpp:31
+msgid "A4"
+msgstr "A4"
 
-#: marginwidget.cpp:169
-msgid "Millimeters (mm)"
-msgstr "Millimehterat (mm)"
+#: lpd/lpdtools.cpp:32
+msgid "A3"
+msgstr "A3"
 
-#: driver.cpp:387
-msgid "JCL"
-msgstr "JCL"
+#: lpd/lpdtools.cpp:33
+msgid "B4"
+msgstr "B4"
 
-#: kmvirtualmanager.cpp:161
-msgid ""
-"You are about to set a pseudo-printer as your personal default. This "
-"setting is specific to TDE and will not be available outside TDE applications. "
-"Note that this will only make your personal default printer as undefined for "
-"non-TDE applications and should not prevent you from printing normally. Do you "
-"really want to set %1 as your personal default?"
-msgstr ""
+#: lpd/lpdtools.cpp:34
+msgid "B5"
+msgstr "B5"
 
-#: kpposterpage.cpp:42
-msgid "   5.  "
-msgstr ""
+#: lpd/lpdtools.cpp:233
+msgid "GhostScript settings"
+msgstr "GhostScript-heivehusat"
+
+#: lpd/lpdtools.cpp:254
+msgid "Resolution"
+msgstr "Čuokkisčoahkku"
+
+#: lpd/lpdtools.cpp:277
+msgid "Color depth"
+msgstr "Ivdnečikŋodat"
+
+#: lpd/lpdtools.cpp:301
+msgid "Additional GS options"
+msgstr "Lassi GS-molssaeavttut"
+
+#: lpd/lpdtools.cpp:313
+msgid "Page size"
+msgstr "Sidosturrodat"
+
+#: lpd/lpdtools.cpp:329
+msgid "Pages per sheet"
+msgstr "Siiddu juohke árkii"
+
+#: lpd/lpdtools.cpp:345
+msgid "Left/right margin (1/72 in)"
+msgstr "Gurut-/olgešsiidoravda (1/72 duma)"
+
+#: lpd/lpdtools.cpp:350
+msgid "Top/bottom margin (1/72 in)"
+msgstr "Bajil-/vuolilsiidoravda (1/72 duma)"
+
+#: lpd/lpdtools.cpp:356
+msgid "Text options"
+msgstr "Teakstamolssaeavttut"
+
+#: lpd/lpdtools.cpp:362
+msgid "Send EOF after job to eject page"
+msgstr "Sádde EOF maŋŋá go barggu vai bálkestit árkka olggos"
+
+#: lpd/lpdtools.cpp:370
+msgid "Fix stair-stepping text"
+msgstr "Divo trahppateavstta"
+
+#: lpd/lpdtools.cpp:382
+msgid "Fast text printing (non-PS printers only)"
+msgstr "Jođánis teakstačáliheapmi (dušše eai-PS čálánat)"
 
-#: kpposterpage.cpp:46
-msgid ""
-"   Print Poster (enabled or disabled).  "
-"
    If you enable this option, you can print posters of different sizes  The "
-"printout will happen in the form 'tiles' printed on smaller  paper "
-"sizes, which you can stitch together later. If you enable this  option "
-"here, the 'Poster Printing' filter will be auto-loaded in  the "
-"'Filters' tab of this dialog. 
     "
-"
    This tab is only visible if the external 'poster' "
-"utility is  discovered by TDEPrint on your system. ['poster' "
-"is a commandline  utility that enables you to convert PostScript files into "
-"tiled printouts  which allow for oversized appearance of the stitched-together "
-"tiles.] 
     "
-"
    Note: The standard version of 'poster' will not work. Your system  "
-"must use a patched version of 'poster'. Ask your operating system vendor to  "
-"provide a patched version of 'poster' if he does not already. 
    "
-msgstr ""
+#: lpd/kmlpdmanager.cpp:87
+msgid "Local printer queue (%1)"
+msgstr "Báikkálaš čálángárgadas (%1)"
 
-#: kpposterpage.cpp:68
+#: lpd/kmlpdmanager.cpp:87
 msgid ""
-"   Tile Selection widget  "
-"
    This GUI element is not only for viewing "
-"your selections: it also  lets you interactively select the tile(s) you want to "
-"print.  
     "
-"
    Hints  "
-"
        "
-"
    • Click any tile to select it for printing.
      •   "
-"
    • To select multiple tiles to be printed  at once, 'shift-click' "
-"on the tiles ('shift-click' means: hold down the  [SHIFT]-key on your keyboard "
-"and click with the mouse while [SHIFT]-key is held.)   Be aware "
-"that the order  of your clicking is also significant to the order of printing "
-"the different tiles. 
      •  
      Note 1: The order of your selection "
-"(and the order for printout of the tiles)  is indicated by the contents of the "
-"text field below,  labelled as 'Tile pages (to be printed):'"
-"
     Note 2: By default no tile is selected. Before you can print (a part "
-" of) your poster, you must select at least one tile. 
          "
-msgstr ""
+"_: Unknown type of local printer queue\n"
+"Unknown"
+msgstr "Amas"
 
-#: kpposterpage.cpp:89
-msgid ""
-"   Poster Size  "
-"
    Select the poster size you want from the dropdown list. 
      "
-"Available sizes are all standard paper sizes up to  'A0'. [A0 is the same size "
-"as 16 sheets of A4, or '84cm x 118.2cm'.] 
      "
-"
    Notice, how the little preview window below changes with your change "
-"of poster  size. It indicates to you how many tiles need to be printed to make "
-"the poster,  given the selected paper size.
       "
-"
    Hint: The little preview window below is not just a passive icon. You "
-"can click  on its individual tiles to select them for printing. To select "
-"multiple tiles to be printed  at once, you need to 'shift-click' "
-"on the tiles ('shift-click' means: hold down the  [SHIFT]-key on your keyboard "
-"and click with the mouse while [SHIFT]-key is held.) The order  of your "
-"clicking is significant to the order of printing the different tiles. The order "
-"of  your selection (and for the printed tiles) is indicated by the contents of "
-"the text field  labelled as 'Tile pages (to be printed):'"
-"
     Note: By default no tile is selected. Before you can print (a part  "
-"of) your poster, you must select at least one tile. 
          "
-msgstr ""
+#: lpd/kmlpdmanager.cpp:88
+msgid ""
+msgstr ""
 
-#: kpposterpage.cpp:108
+#: lpd/kmlpdmanager.cpp:89
 msgid ""
-"   Paper Size  "
-"
    This field indicates the paper size the poster tiles will be printed on.  To "
-"select a different paper size for your poster tiles, go to the 'General' tab  "
-"of this dialog and select one from the dropdown list. 
      "
-"Available sizes are most standard paper sizes supported by your printer. Your "
-"printer's  supported paper sizes are read from the printer driver info (as laid "
-"down in the 'PPD',  the printer description file). "
-"Be aware that the 'Paper Size' selected may not be supported  by 'poster' "
-"(example: 'HalfLetter') while it may well be supported by your printer.  "
-"If  you hit that obstacle, simply use another, supported Paper Size, like 'A4' "
-"or 'Letter'.  "
-"
    Notice, how the little preview window below changes with your change "
-"of paper  size. It indicates how many tiles need to be printed to make up the "
-"poster,  given the selected paper and poster size.
       "
-"
    Hint: The little preview window below is not just a passive icon. You "
-"can click  on its individual tiles to select them for printing. To select "
-"multiple tiles to be printed  at once, you need to 'shift-click' "
-"on the tiles ('shift-click' means: hold down the  [SHIFT]-key on your keyboard "
-"and click with the mouse while [SHIFT]-key is held.) The order  of your "
-"clicking is significant to the order of printing the different tiles. The order "
-"of  your selection (and for the printed tiles) is indicated by the contents of "
-"the text field  labelled as 'Tile pages (to be printed):'"
-"
     Note: By default no tile is selected. Before you can print (a part  "
-"of) your poster, you must select at least one tile. 
          "
-msgstr ""
+"_: Unknown Driver\n"
+"Unknown"
+msgstr "Amas"
 
-#: kpposterpage.cpp:132
-msgid ""
-"   Cut Margin selection  "
-"
    Slider and spinbox let you determine a 'cut margin' "
-"which will be printed onto  each tile of your poster to help you cut the pieces "
-"as needed. 
     "
-"
    Notice, how the little preview window above changes with your change "
-"of cut  margins. It indicates to you how much space the cut margins will take "
-"away from each tile.  "
-"
    Be aware, that your cut margins need to be equal to or greater than "
-"the margins your  printer uses. The printer's capabilities are described in the "
-"'ImageableArea'  keywords of its driver PPD file. 
          "
-msgstr ""
+#: lpd/kmlpdmanager.cpp:95
+msgid "Remote LPD queue %1@%2"
+msgstr "Gáiddus LPD-gárgadas, %1@%2"
+
+#: lpd/kmlpdmanager.cpp:158
+msgid "Unable to create spool directory %1 for printer %2."
+msgstr "Ii sáhte ráhkadit gárgadasozu %1 %2 čálána várás."
+
+#: lpd/kmlpdmanager.cpp:165
+msgid "Unable to save information for printer %1."
+msgstr "Ii sáhte vurket dieđuid %1-čálána várás."
 
-#: kpposterpage.cpp:143
+#: lpd/kmlpdmanager.cpp:193
 msgid ""
-"   Order and number of tile pages to be printed  "
-"
    This field displays and sets the individual tiles to be printed, as well as "
-"the order  for their printout. 
      You can file the field with 2 different "
-"methods:  "
-"
        "
-"
    • Either use the interactive thumbnail preview above and '[SHIFT]-click' on "
-"the tiles. 
      •   "
-"
    • Or edit this text field accordingly. 
      •   
      "
-"
    When editing the field, you can use a '3-7' syntax instead of a '3,4,5,6,7' "
-"one. 
      "
-"
    Examples:
      "
-"
        \"2,3,7,9,3\"  "
-"
        \"1-3,6,8-11\"  "
+"Unable to set correct permissions on spool directory %1 for printer %2."
 msgstr ""
+"Ii sáhte bidjat rievttes beassanvuoigatvuođaid %1-gárgadasohcui %2"
+"-čálána várás."
 
-#: kpposterpage.cpp:160
-msgid "Poster"
-msgstr "Plakáhtta"
+#: lpd/kmlpdmanager.cpp:237
+msgid "Permission denied: you must be root."
+msgstr "It beasa. Don fertet leat geavaheaddji «root»."
 
-#: kpposterpage.cpp:162
-msgid "&Print poster"
-msgstr "Čálit &plakáhta"
+#: lpd/kmlpdmanager.cpp:244
+msgid "Unable to execute command \"%1\"."
+msgstr "Ii sáhte vuodjit gohččuma «%1»."
 
-#: kpposterpage.cpp:176
-msgid "Poste&r size:"
-msgstr "Plakáhtta&sturrodat:"
+#: lpd/kmlpdmanager.cpp:317
+msgid "Unable to write printcap file."
+msgstr "Ii sáhte čállit printcap-fiilii."
 
-#: kpposterpage.cpp:178
-msgid "Media size:"
-msgstr "Mediasturrodat:"
+#: lpd/kmlpdmanager.cpp:372
+msgid "Couldn't find driver %1 in printtool database."
+msgstr "Ii gávdnan %1 stivrrana printtool-diehtovuođus."
 
-#: kpposterpage.cpp:180
-msgid "Pri&nt size:"
-msgstr "Čáli&hansturrodat:"
+#: lpd/kmlpdmanager.cpp:411
+msgid "Couldn't find printer %1 in printcap file."
+msgstr "Ii gávdnan %1-čálána printcap-fiillas."
 
-#: kpposterpage.cpp:187
-#, no-c-format
-msgid "C&ut margin (% of media):"
-msgstr ""
+#: lpd/kmlpdmanager.cpp:440
+msgid "No driver found (raw printer)"
+msgstr "Ii gávdnan stivrrana (oktageardánis čálán)"
 
-#: kpposterpage.cpp:191
-msgid "&Tile pages (to be printed):"
-msgstr ""
+#: lpd/kmlpdmanager.cpp:442
+msgid "Printer type not recognized."
+msgstr "Amas čálánšládja."
 
-#: kpposterpage.cpp:198
-msgid "Link/unlink poster and print size"
+#: lpd/kmlpdmanager.cpp:452
+msgid ""
+"The driver device %1 is not compiled in your GhostScript distribution. "
+"Check your installation or use another driver."
 msgstr ""
+"Čálánovttadat %1 ii leat kompilerejuvvon sisa GhostScript prográmmii. "
+"Dárkkis sajáiduhttima dahje geavat eará stivrrana."
 
-#: kpposterpage.cpp:263
-msgid "Unknown"
-msgstr "Amas"
+#: lpd/kmlpdmanager.cpp:560
+msgid "Unable to write driver associated files in spool directory."
+msgstr "Ii sáhte čállit stivrrančatnojuvvon fiillaid gárgadasohcui."
+
+#: driver.cpp:387
+msgid "JCL"
+msgstr "JCL"
 
 #: kxmlcommand.cpp:789
 msgid "One of the command object's requirements is not met."
@@ -5579,10 +5651,6 @@ msgstr "Ovtta gohččunobjeavtta gáibadusain ii ollašuvvon."
 msgid "The command does not contain the required tag %1."
 msgstr "Gohččumis ii leat gáibáduvvon sárgá %1."
 
-#: kprintaction.cpp:117 kprintaction.cpp:122 kprintaction.cpp:127
-msgid "&Export..."
-msgstr "&Olggosfievrrit …"
-
 #: kpfilterpage.cpp:42
 msgid ""
 "  Add Filter button "
@@ -5715,74 +5783,11 @@ msgstr ""
 msgid "Input"
 msgstr "Sisa"
 
-#: kpqtpage.cpp:70
-msgid ""
-"   Selection of color mode: You can choose between 2 options:  "
-"
      "
-"
    • Color and
      •   "
-"
    • Grayscale
      Note: This selection field may be grayed "
-"out and made inactive.  This happens if TDEPrint can not retrieve  enough "
-"information about your print file. In this case the embedded color- or "
-"grayscale information  of your printfile, and the default handling of the "
-"printer take precedence.      "
-msgstr ""
-
-#: kpqtpage.cpp:79
-msgid ""
-"   Selection of page size: Select paper size to be printed on from  "
-"the drop-down menu.  "
-"
    The exact list of choices depends on the printer driver (\"PPD\") you have "
-"installed.  "
-msgstr ""
-
-#: kpqtpage.cpp:84
-msgid ""
-"   Selection of pages per sheet:  You can choose to print more than "
-"one page onto each sheet of paper.  This is sometimes useful to save paper.  "
-"
    Note 1: the page images get scaled down accordingly to print 2 or 4 "
-"pages per sheet.  The page image does not get scaled if you print 1 page per "
-"sheet (the default setting.).  "
-"
    Note 2: If you select multiple pages per sheet here, the scaling and "
-"re-arranging is done  by your printing system.  "
-"
    Note 3, regarding \"Other\": You cannot really select Other "
-"as the number of  pages to print on one sheet.\"Other\" is checkmarked here for "
-"information purposes only.  "
-"
    To select 8, 9, 16 or other numbers of  pages per sheet:  "
-"
        "
-"
    •  go to the tab headlined \"Filter\"
      •  "
-"
    •  enable the Multiple Pages per Sheet filter 
      •  "
-"
    •  and configure it (bottom-most button on the right of the \"Filters\" tab). "
-"
      •  
         "
-msgstr ""
-
-#: kpqtpage.cpp:102
-msgid ""
-"   Selection of image orientation: Orientation of the printed  "
-"pageimage on your paper is controlled by the radio buttons. By default,  the "
-"orientation is Portrait  "
-"
    You can select 2 alternatives:  "
-"
        "
-"
    •  Portrait..Portrait is the default setting. 
      •   "
-"
    •  Landscape. 
      •   
      The icon changes according to your "
-"selection.     "
-msgstr ""
-
-#: kpqtpage.cpp:113
-msgid "Print Format"
-msgstr "Čálihanformáhtta"
-
-#: kpqtpage.cpp:123
-msgid "Color Mode"
-msgstr "Ivdnedoaibmanvuohki"
-
-#: kpqtpage.cpp:135
-msgid "Colo&r"
-msgstr "Iv&dni"
+#~ msgid "%1 &Handbook"
+#~ msgstr "%1-&giehtagirji"
 
-#: kpqtpage.cpp:138
-msgid "&Grayscale"
-msgstr "&Ránesivnnit"
+#~ msgid "%1 &Web Site"
+#~ msgstr "%1 &fierpmádatbáiki"
 
-#: kpqtpage.cpp:151
-msgid "Ot&her"
-msgstr "&Eará"
+#~ msgid "Documentation"
+#~ msgstr "Veahkketeaksta"
-- 
cgit v1.2.1