From 3b268265fa12c8a9a18d621eb739d79341bf37ac Mon Sep 17 00:00:00 2001 From: TDE Weblate Date: Sat, 22 Dec 2018 16:32:53 +0000 Subject: Update translation files tdegraphics / kdvi Updated by "Update PO files to match POT (msgmerge)" hook in Weblate. --- tde-i18n-tg/messages/tdegraphics/kdvi.po | 677 ++++++++++++++++--------------- 1 file changed, 341 insertions(+), 336 deletions(-) (limited to 'tde-i18n-tg/messages') diff --git a/tde-i18n-tg/messages/tdegraphics/kdvi.po b/tde-i18n-tg/messages/tdegraphics/kdvi.po index 6b2f61ebcd3..1fa201f75b0 100644 --- a/tde-i18n-tg/messages/tdegraphics/kdvi.po +++ b/tde-i18n-tg/messages/tdegraphics/kdvi.po @@ -10,7 +10,7 @@ msgid "" msgstr "" "Project-Id-Version: kdvi\n" -"POT-Creation-Date: 2014-09-29 12:06-0500\n" +"POT-Creation-Date: 2018-12-21 14:20+0100\n" "PO-Revision-Date: 2005-09-17 13:00+0500\n" "Last-Translator: Victor Ibragimov \n" "Language-Team: Tajik\n" @@ -20,6 +20,25 @@ msgstr "" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 1.10\n" +#: _translatorinfo:1 +msgid "" +"_: NAME OF TRANSLATORS\n" +"Your names" +msgstr "" +"* НПО \"Имкониятҳои ҷавонон\" * Tajik Linux Users Group * Young Ladies Tajik " +"Linux Users Group * http://www.khujand.org * http://www.tajikngo.org * " +"http://www.yo-tj.org * Роҷер Ковакс, Виктор Ибрагимов, Марина Колючева, " +"Евгения Фатхеева, Акмал Ватаншоев, Абророва Хиромон, Акмал Саломов, Акбар " +"Ватаншоев, Фарход Ахмедов, Эркин Пулатов, Гулшод Довуди, Гулноз Курбанова, " +"Зарина Косымова, Шухрат Лоиқов, Сурайё Ҷурахонова *" + +#: _translatorinfo:2 +msgid "" +"_: EMAIL OF TRANSLATORS\n" +"Your emails" +msgstr "" +"rkovacs@khujand.org, youth_opportunities@tajikngo.org, MarinaKL@tajikngo.org" + #: TeXFontDefinition.cpp:108 msgid "Cannot find font %1, file %2." msgstr "Кофтани ҳарф %1, файл наметавонад %2." @@ -48,7 +67,8 @@ msgstr "Андозаи файли ҳарф таъин кардан муясса #: TeXFont_PFB.cpp:44 msgid "" -"The font file %1 could be opened and read, but its font format is unsupported." +"The font file %1 could be opened and read, but its font format is " +"unsupported." msgstr "" "Ҳуруфи файли %1 кушода шуда ва хонда метавонад ,вале ин андозаи ҳуруф нигоҳ " "дошта намешавад." @@ -112,34 +132,15 @@ msgstr "Нодурусти pk файл (%1), бисёри бит" msgid "Font has non-square aspect ratio " msgstr "" -#: _translatorinfo.cpp:1 -msgid "" -"_: NAME OF TRANSLATORS\n" -"Your names" -msgstr "" -"* НПО \"Имкониятҳои ҷавонон\" * Tajik Linux Users Group * Young Ladies Tajik " -"Linux Users Group * http://www.khujand.org * http://www.tajikngo.org * " -"http://www.yo-tj.org * Роҷер Ковакс, Виктор Ибрагимов, Марина Колючева, Евгения " -"Фатхеева, Акмал Ватаншоев, Абророва Хиромон, Акмал Саломов, Акбар Ватаншоев, " -"Фарход Ахмедов, Эркин Пулатов, Гулшод Довуди, Гулноз Курбанова, Зарина " -"Косымова, Шухрат Лоиқов, Сурайё Ҷурахонова *" - -#: _translatorinfo.cpp:3 -msgid "" -"_: EMAIL OF TRANSLATORS\n" -"Your emails" -msgstr "" -"rkovacs@khujand.org, youth_opportunities@tajikngo.org, MarinaKL@tajikngo.org" - #: dviFile.cpp:112 msgid "The DVI file does not start with the preamble." msgstr "Преамбулаи дар аввали файл DVI нест" #: dviFile.cpp:117 msgid "" -"The DVI file contains the wrong version of DVI output for this program. Hint: " -"If you use the typesetting system Omega, you have to use a special program, " -"such as oxdvi." +"The DVI file contains the wrong version of DVI output for this program. " +"Hint: If you use the typesetting system Omega, you have to use a special " +"program, such as oxdvi." msgstr "" #: dviFile.cpp:155 @@ -185,9 +186,13 @@ msgstr "Тамошои DVI: аҳборот" #: dviRenderer.cpp:277 msgid "" -"This DVI file contains source file information. You may click into the text " -"with the middle mouse button, and an editor will open the TeX-source file " -"immediately." +"This DVI file contains source file information. You may click into the " +"text with the middle mouse button, and an editor will open the TeX-source " +"file immediately." +msgstr "" + +#: dviRenderer.cpp:284 +msgid "Do not show this message again" msgstr "" #: dviRenderer.cpp:286 @@ -210,8 +215,8 @@ msgstr "" #: dviRenderer.cpp:439 msgid "" -"File error. The specified file '%1' does not exist. KDVI " -"already tried to add the ending '.dvi'." +"File error. The specified file '%1' does not exist. " +"KDVI already tried to add the ending '.dvi'." msgstr "" #: dviRenderer.cpp:441 @@ -220,23 +225,23 @@ msgstr "Хатои файл!" #: dviRenderer.cpp:452 msgid "" -"Could not open file %1 which has type " -"%2. KDVI can only load DVI (.dvi) files." +"Could not open file %1 which has type " +"%2. KDVI can only load DVI (.dvi) files." msgstr "" #: dviRenderer.cpp:463 dviRenderer.cpp:481 msgid "" -"File corruption! KDVI had trouble interpreting your DVI file. Most likely " -"this means that the DVI file is broken." +"File corruption! KDVI had trouble interpreting your DVI file. Most " +"likely this means that the DVI file is broken." msgstr "" #: dviRenderer.cpp:640 msgid "" -"You have asked KDVI to locate the place in the DVI file which corresponds " -"to line %1 in the TeX-file %2. It seems, however, that the DVI " -"file does not contain the necessary source file information. We refer to the " -"manual of KDVI for a detailed explanation on how to include this information. " -"Press the F1 key to open the manual." +"You have asked KDVI to locate the place in the DVI file which " +"corresponds to line %1 in the TeX-file %2. It seems, " +"however, that the DVI file does not contain the necessary source file " +"information. We refer to the manual of KDVI for a detailed explanation on " +"how to include this information. Press the F1 key to open the manual." msgstr "" #: dviRenderer.cpp:645 dviRenderer.cpp:685 @@ -245,14 +250,14 @@ msgstr "Кофтани истинод наметавонад" #: dviRenderer.cpp:683 msgid "" -"KDVI was not able to locate the place in the DVI file which corresponds to " -"line %1 in the TeX-file %2." +"KDVI was not able to locate the place in the DVI file which corresponds " +"to line %1 in the TeX-file %2." msgstr "" #: dviRenderer.cpp:737 msgid "" -"The DVI-file refers to the TeX-file %1 " -"which could not be found." +"The DVI-file refers to the TeX-file %1 which could not be " +"found." msgstr "" #: dviRenderer.cpp:740 @@ -262,8 +267,8 @@ msgstr "Кофтани файл наметавонад" #: dviRenderer.cpp:747 msgid "" "You have not yet specified an editor for inverse search. Please choose your " -"favorite editor in the DVI options dialog " -"which you will find in the Settings-menu." +"favorite editor in the DVI options dialog which you will " +"find in the Settings-menu." msgstr "" #: dviRenderer.cpp:752 @@ -276,15 +281,12 @@ msgstr "Муҳаррири Kate истифода кардан" #: dviRenderer.cpp:785 msgid "" -"The external program" -"
" -"
%1" -"
" -"
which was used to call the editor for inverse search, reported an error. " -"You might wish to look at the document info dialog " -"which you will find in the File-Menu for a precise error report. The manual for " -"KDVI contains a detailed explanation how to set up your editor for use with " -"KDVI, and a list of common problems." +"The external program

%1

which " +"was used to call the editor for inverse search, reported an error. You might " +"wish to look at the document info dialog which you will " +"find in the File-Menu for a precise error report. The manual for KDVI " +"contains a detailed explanation how to set up your editor for use with KDVI, " +"and a list of common problems." msgstr "" #: dviRenderer.cpp:791 @@ -321,14 +323,14 @@ msgstr "оп-коди номаълум %1 зоҳир кардан." #: dviRenderer_export.cpp:84 msgid "" -"KDVI could not locate the program 'dvipdfm' on your computer. That program is " -"essential for the export function to work. You can, however, convert the " -"DVI-file to PDF using the print function of KDVI, but that will often produce " -"documents which print ok, but are of inferior quality if viewed in the Acrobat " -"Reader. It may be wise to upgrade to a more recent version of your TeX " -"distribution which includes the 'dvipdfm' program.\n" -"Hint to the perplexed system administrator: KDVI uses the shell's PATH variable " -"when looking for programs." +"KDVI could not locate the program 'dvipdfm' on your computer. That program " +"is essential for the export function to work. You can, however, convert the " +"DVI-file to PDF using the print function of KDVI, but that will often " +"produce documents which print ok, but are of inferior quality if viewed in " +"the Acrobat Reader. It may be wise to upgrade to a more recent version of " +"your TeX distribution which includes the 'dvipdfm' program.\n" +"Hint to the perplexed system administrator: KDVI uses the shell's PATH " +"variable when looking for programs." msgstr "" #: dviRenderer_export.cpp:99 @@ -339,8 +341,7 @@ msgstr "*.pdf Андозаи Ҳуҷҷат PDF (*.pdf)" msgid "Export File As" msgstr "Содироти дар файл" -#: dviRenderer_export.cpp:104 dviRenderer_export.cpp:203 -#: kdvi_multipage.cpp:164 +#: dviRenderer_export.cpp:104 dviRenderer_export.cpp:203 kdvi_multipage.cpp:164 msgid "" "The file %1\n" "exists. Do you want to overwrite that file?" @@ -348,8 +349,7 @@ msgstr "" "Файл %1 аллакай ҳастӣ.\n" "Бо навиштум ин файл?" -#: dviRenderer_export.cpp:105 dviRenderer_export.cpp:204 -#: kdvi_multipage.cpp:165 +#: dviRenderer_export.cpp:105 dviRenderer_export.cpp:204 kdvi_multipage.cpp:165 msgid "Overwrite File" msgstr "Файли аз нав навиштан" @@ -364,9 +364,9 @@ msgstr "dvipdfm барои содироти фаил дар PDF истифода #: dviRenderer_export.cpp:114 msgid "" -"KDVI is currently using the external program 'dvipdfm' to convert your DVI-file " -"to PDF. Sometimes that can take a while because dvipdfm needs to generate its " -"own bitmap fonts Please be patient." +"KDVI is currently using the external program 'dvipdfm' to convert your DVI-" +"file to PDF. Sometimes that can take a while because dvipdfm needs to " +"generate its own bitmap fonts Please be patient." msgstr "" #: dviRenderer_export.cpp:118 @@ -383,9 +383,10 @@ msgstr "Лутфан, интизор шавед" #: dviRenderer_export.cpp:137 msgid "" -"The external program 'dvipdf', which was used to export the file, reported " -"an error. You might wish to look at the document info dialog " -"which you will find in the File-Menu for a precise error report." +"The external program 'dvipdf', which was used to export the file, " +"reported an error. You might wish to look at the document info " +"dialog which you will find in the File-Menu for a precise error " +"report." msgstr "" #: dviRenderer_export.cpp:140 @@ -398,11 +399,10 @@ msgid "" "PostScript format, and cannot be handled by the dvips " "program that KDVI uses interally to print or to export to PostScript. The " "functionality that you require is therefore unavailable in this version of " -"KDVI.

" -"

As a workaround, you can use the File/Export As" -"-Menu to save this file in PDF format, and then use a PDF viewer.

" -"

The author of KDVI apologizes for the inconvenience. If enough users " -"complain, the missing functionality might later be added.

" +"KDVI.

As a workaround, you can use the File/Export As-" +"Menu to save this file in PDF format, and then use a PDF viewer.

The " +"author of KDVI apologizes for the inconvenience. If enough users complain, " +"the missing functionality might later be added.

" msgstr "" #: dviRenderer_export.cpp:188 @@ -419,9 +419,9 @@ msgstr "Истифода бурдани dvips барои экспорти фай #: dviRenderer_export.cpp:217 msgid "" -"KDVI is currently using the external program 'dvips' to convert your DVI-file " -"to PostScript. Sometimes that can take a while because dvips needs to generate " -"its own bitmap fonts Please be patient." +"KDVI is currently using the external program 'dvips' to convert your DVI-" +"file to PostScript. Sometimes that can take a while because dvips needs to " +"generate its own bitmap fonts Please be patient." msgstr "" #: dviRenderer_export.cpp:221 @@ -434,9 +434,10 @@ msgstr "Равиши иҷро кунии dvips" #: dviRenderer_export.cpp:300 msgid "" -"The external program 'dvips', which was used to export the file, reported " -"an error. You might wish to look at the document info dialog " -"which you will find in the File-Menu for a precise error report." +"The external program 'dvips', which was used to export the file, " +"reported an error. You might wish to look at the document info " +"dialog which you will find in the File-Menu for a precise error " +"report." msgstr "" #: dviRenderer_export.cpp:303 @@ -450,8 +451,7 @@ msgstr "Ҷорӣ кардан %1" #: dviRenderer_prescan.cpp:105 msgid "" -"Page %1: The PostScript file %2 could not be found." -"
" +"Page %1: The PostScript file %2 could not be found.
" msgstr "Саҳифа %1: файли PostScript %2 ёфт нашудан.
" #: dviRenderer_prescan.cpp:255 @@ -473,8 +473,9 @@ msgstr "Қатъ кардани офариниши ҳуруфҳоро.Одата #: fontpool.cpp:48 msgid "" "KDVI is currently generating bitmap fonts which are needed to display your " -"document. For this, KDVI uses a number of external programs, such as MetaFont. " -"You can find the output of these programs later in the document info dialog." +"document. For this, KDVI uses a number of external programs, such as " +"MetaFont. You can find the output of these programs later in the document " +"info dialog." msgstr "" #: fontpool.cpp:51 @@ -497,6 +498,10 @@ msgstr "Номи TeX" msgid "Family" msgstr "Оила" +#: fontpool.cpp:192 +msgid "Zoom" +msgstr "" + #: fontpool.cpp:193 msgid "Type" msgstr "Намуд" @@ -515,8 +520,7 @@ msgstr "Файли ҳарфи накофтан" #: fontpool.cpp:284 msgid "" -"" -"

KDVI was not able to locate all the font files which are necessary to " +"

KDVI was not able to locate all the font files which are necessary to " "display the current DVI file. Your document might be unreadable.

" msgstr "" @@ -539,9 +543,8 @@ msgstr "" msgid "" "

The shell process for the kpsewhich program could not be started. " "Consequently, some font files could not be found, and your document might by " -"unreadable. If this error is reproducable please report the issue to the KDVI " -"developers using the 'Help' menu." -"

" +"unreadable. If this error is reproducable please report the issue to the " +"KDVI developers using the 'Help' menu.

" msgstr "" #: fontpool.cpp:367 fontpool.cpp:405 @@ -557,14 +560,14 @@ msgstr "Ҳарф накофтан - KDVI" #: fontpool.cpp:394 msgid "" "

There were problems running kpsewhich. As a result, some font files could " -"not be located, and your document might be unreadable.

" -"

Possible reason: The kpsewhich program is perhaps not installed on " -"your system, or it cannot be found in the current search path.

" -"

What you can do: The kpsewhich program is normally contained in " -"distributions of the TeX typesetting system. If TeX is not installed on your " -"system, you could install the TeTeX distribution (www.tetex.org). If you are " -"sure that TeX is installed, please try to use the kpsewhich program from the " -"command line to check if it really works.

" +"not be located, and your document might be unreadable.

Possible " +"reason: The kpsewhich program is perhaps not installed on your system, " +"or it cannot be found in the current search path.

What you can do: The kpsewhich program is normally contained in distributions of the TeX " +"typesetting system. If TeX is not installed on your system, you could " +"install the TeTeX distribution (www.tetex.org). If you are sure that TeX is " +"installed, please try to use the kpsewhich program from the command line to " +"check if it really works.

" msgstr "" #: fontpool.cpp:590 @@ -596,6 +599,11 @@ msgstr "Файли DVI" msgid "Information on the currently loaded DVI-file." msgstr "Хабари барои пурбори ҳарф DVL." +#: infodialog.cpp:33 +#, fuzzy +msgid "Fonts" +msgstr "Ҳарфҳои TeX" + #: infodialog.cpp:38 msgid "Information on currently loaded fonts." msgstr "Хабари барои пурборҳои ҳарф" @@ -603,8 +611,8 @@ msgstr "Хабари барои пурборҳои ҳарф" #: infodialog.cpp:39 msgid "" "This text field shows detailed information about the currently loaded fonts. " -"This is useful for experts who want to locate problems in the setup of TeX or " -"KDVI." +"This is useful for experts who want to locate problems in the setup of TeX " +"or KDVI." msgstr "" #: infodialog.cpp:43 @@ -622,8 +630,8 @@ msgstr "Бароварданҳои берунии нақша." #: infodialog.cpp:48 msgid "" "KDVI uses external programs, such as MetaFont, dvipdfm or dvips. This text " -"field shows the output of these programs. That is useful for experts who want " -"to find problems in the setup of TeX or KDVI." +"field shows the output of these programs. That is useful for experts who " +"want to find problems in the setup of TeX or KDVI." msgstr "" #: infodialog.cpp:64 @@ -682,8 +690,8 @@ msgstr "" #: kdvi_multipage.cpp:105 msgid "" -"This program displays Device Independent (DVI) files which are produced by the " -"TeX typesetting system.\n" +"This program displays Device Independent (DVI) files which are produced by " +"the TeX typesetting system.\n" "KDVI 1.3 is based on original code from KDVI version 0.43 and xdvik." msgstr "" @@ -736,8 +744,8 @@ msgstr "Чоп кардан %1" #: kdvi_multipage.cpp:251 msgid "" "The list of pages you selected was empty.\n" -"Maybe you made an error in selecting the pages, e.g. by giving an invalid range " -"like '7-2'." +"Maybe you made an error in selecting the pages, e.g. by giving an invalid " +"range like '7-2'." msgstr "" #: kdvi_multipage.cpp:414 @@ -749,8 +757,8 @@ msgid "" "This function searches the DVI file for plain text. Unfortunately, this " "version of KDVI treats only plain ASCII characters properly. Symbols, " "ligatures, mathematical formulae, accented characters, and non-English text, " -"such as Russian or Korean, will most likely be messed up completely. Continue " -"anyway?" +"such as Russian or Korean, will most likely be messed up completely. " +"Continue anyway?" msgstr "" #: kdvi_multipage.cpp:469 kdvi_multipage_texthandling.cpp:64 @@ -785,8 +793,8 @@ msgstr "" #: main.cpp:37 msgid "" -"This program displays Device Independent (DVI) files which are produced by the " -"TeX typesetting system.\n" +"This program displays Device Independent (DVI) files which are produced by " +"the TeX typesetting system.\n" "This KDVI version is based on original code from KDVI version 0.43 and xdvik." msgstr "" @@ -796,8 +804,8 @@ msgstr "" #: main.cpp:86 msgid "" -"The URL %1 does not point to a local file. You can only specify local files if " -"you are using the '--unique' option." +"The URL %1 does not point to a local file. You can only specify local files " +"if you are using the '--unique' option." msgstr "" #: optionDialogFontsWidget.cpp:34 @@ -852,215 +860,28 @@ msgstr "Ҳосили графики PostScript..." #: psgs.cpp:250 msgid "" "The version of Ghostview that is installed on this computer does not " -"contain any of the Ghostview device drivers that are known to KDVI. PostScript " -"support has therefore been turned off in KDVI." +"contain any of the Ghostview device drivers that are known to KDVI. " +"PostScript support has therefore been turned off in KDVI." msgstr "" #: psgs.cpp:253 msgid "" -"" -"

The Ghostview program, which KDVI uses internally to display the PostScript " -"graphics that is included in this DVI file, is generally able to write its " -"output in a variety of formats. The sub-programs that Ghostview uses for these " -"tasks are called 'device drivers'; there is one device driver for each format " -"that Ghostview is able to write. Different versions of Ghostview often have " -"different sets of device drivers available. It seems that the version of " -"Ghostview that is installed on this computer does not contain " -"any of the device drivers that are known to KDVI.

" -"

It seems unlikely that a regular installation of Ghostview would not contain " -"these drivers. This error may therefore point to a serious misconfiguration of " -"the Ghostview installation on your computer.

" -"

If you want to fix the problems with Ghostview, you can use the command " -"gs --help to display the list of device drivers contained in " -"Ghostview. Among others, KDVI can use the 'png256', 'jpeg' and 'pnm' drivers. " -"Note that KDVI needs to be restarted to re-enable PostScript support.

" -msgstr "" - -#. i18n: file kdvi_part.rc line 6 -#: rc.cpp:6 -#, no-c-format -msgid "Export As" -msgstr "Содироти ҳамчун" - -#. i18n: file optionDialogFontsWidget_base.ui line 28 -#: rc.cpp:18 -#, fuzzy, no-c-format -msgid "Use font hinting for Type 1 fonts, if available" -msgstr "Ҳарфи истифода кардан Type1, агар ин дастрас" - -#. i18n: file optionDialogFontsWidget_base.ui line 31 -#: rc.cpp:21 -#, no-c-format -msgid "" -"You should enable this, if the use of font hinting improves readability on your " -"machine." -msgstr "" -"Шумо метавонед ба кор даровардани ишораи ҳуруфро санҷед ,чи хеле , ки " -"онлавозимоти заруриро барои хондани ҳуҷатҳо баланд месозад." - -#. i18n: file optionDialogFontsWidget_base.ui line 34 -#: rc.cpp:24 -#, no-c-format -msgid "" -"Many modern fonts contain \"font hinting\" information which can be used to " -"improve the appearance of a font on low-resolution displays, such as a computer " -"monitor, or a notebook screen. However, many people find the \"improved\" fonts " -"quite ugly and prefer to have this option disabled." -msgstr "" - -#. i18n: file optionDialogSpecialWidget_base.ui line 27 -#: rc.cpp:27 -#, no-c-format -msgid "Show PostScript specials" -msgstr "PostScript даровардани нишон додан" - -#. i18n: file optionDialogSpecialWidget_base.ui line 30 -#: rc.cpp:30 -#, no-c-format -msgid "If in doubt, enable this option." -msgstr "Даровардани ин опсия, агар шубҳа карданд." - -#. i18n: file optionDialogSpecialWidget_base.ui line 33 -#: rc.cpp:33 rc.cpp:83 -#, no-c-format -msgid "" -"Some DVI files contain PostScript graphics. If enabled, KDVI will use the " -"Ghostview PostScript interpreter to display these. You probably want to enable " -"this option, unless you have a DVI-file whose PostScript part is broken, or too " -"large for your machine." -msgstr "" - -#. i18n: file optionDialogSpecialWidget_base.ui line 41 -#: rc.cpp:36 -#, no-c-format -msgid "Editor for Inverse Search" -msgstr "Муҳаррири барои бозгашти ҷустуҷӯ" - -#. i18n: file optionDialogSpecialWidget_base.ui line 60 -#: rc.cpp:39 -#, no-c-format -msgid "Choose an editor which is used in inverse search." -msgstr "Интиҳоби муҳаррир барои ҷустуҷӯи бозгашт." - -#. i18n: file optionDialogSpecialWidget_base.ui line 64 -#: rc.cpp:42 -#, no-c-format -msgid "" -"

Some DVI files contain 'inverse search' information. If such a DVI file is " -"loaded, you can right-click into KDVI and an editor will open, load the TeX " -"file and jump to the correct position. You can select your favorite editor " -"here. If in doubt, 'nedit' is usually a good choice.

\n" -"

Check the KDVI manual to see how to prepare DVI files which support the " -"inverse search.

" -msgstr "" - -#. i18n: file optionDialogSpecialWidget_base.ui line 80 -#: rc.cpp:46 -#, no-c-format -msgid "Description:" -msgstr "Тасвир:" - -#. i18n: file optionDialogSpecialWidget_base.ui line 96 -#: rc.cpp:49 -#, no-c-format -msgid "Shell command:" -msgstr "Фармони сар додан:" - -#. i18n: file optionDialogSpecialWidget_base.ui line 115 -#: rc.cpp:52 -#, no-c-format -msgid "" -"Explains about the editor's capabilities in conjunction with inverse search." -msgstr "Тасвир кардани мувофиқати муҳарир бо кофтукоби ақиб." - -#. i18n: file optionDialogSpecialWidget_base.ui line 119 -#: rc.cpp:55 -#, no-c-format -msgid "" -"

Not all editors are well suited for inverse search. For instance, many " -"editors have no command like 'If the file is not yet loaded, load it. " -"Otherwise, bring the window with the file to the front'. If you are using an " -"editor like this, clicking into the DVI file will always open a new editor, " -"even if the TeX file is already open. Likewise, many editors have no command " -"line argument that would allow KDVI to specify the exact line which you wish to " -"edit.

\n" -"

If you feel that KDVI's support for a certain editor is inadequate, please " -"contact the Trinity developers at www.trinitydesktop.org.

" -msgstr "" - -#. i18n: file optionDialogSpecialWidget_base.ui line 135 -#: rc.cpp:59 -#, no-c-format -msgid "Shell-command line used to start the editor." -msgstr "" -"Фармони \"Sell\" барои ба кор даровардани муҳарир истифода бурда мешавад." - -#. i18n: file optionDialogSpecialWidget_base.ui line 138 -#: rc.cpp:62 -#, no-c-format -msgid "" -"If you are using inverse search, KDVI uses this command line to start the " -"editor. The field '%f' is replaced with the filename, and '%l' is replaced with " -"the line number." -msgstr "" - -#. i18n: file optionDialogSpecialWidget_base.ui line 154 -#: rc.cpp:65 -#, no-c-format -msgid "Editor:" -msgstr "Муҳаррир:" - -#. i18n: file optionDialogSpecialWidget_base.ui line 170 -#: rc.cpp:68 -#, no-c-format -msgid "What is 'inverse search'? " -msgstr "Чист 'ҷустуҷӯи бозгашт'? " - -#. i18n: file optionDialogSpecialWidget_base.ui line 176 -#: rc.cpp:71 -#, no-c-format -msgid "inv-search" -msgstr "Ҷустуҷӯи бозгашт" - -#. i18n: file kdvi.kcfg line 10 -#: rc.cpp:74 -#, fuzzy, no-c-format -msgid "" -"Use MetaFont to generate missing fonts. If in doubt, enable this option." -msgstr "Даровардани ин опсия, агар шубҳа карданд." - -#. i18n: file kdvi.kcfg line 11 -#: rc.cpp:77 -#, no-c-format -msgid "" -"Allows KDVI to use MetaFont to produce bitmap fonts. Unless you have a very " -"specific reason, you probably want to enable this option." -msgstr "" - -#. i18n: file kdvi.kcfg line 15 -#: rc.cpp:80 -#, fuzzy, no-c-format -msgid "Show PostScript specials. If in doubt, enable this option." -msgstr "Даровардани ин опсия, агар шубҳа карданд." - -#. i18n: file kdvi.kcfg line 20 -#: rc.cpp:86 -#, fuzzy, no-c-format -msgid "" -"Use font hinting. You should enable this, if the use of font hinting improves " -"readability on your machine." -msgstr "" -"Шумо метавонед ба кор даровардани ишораи ҳуруфро санҷед ,чи хеле , ки " -"онлавозимоти заруриро барои хондани ҳуҷатҳо баланд месозад." - -#. i18n: file kdvi.kcfg line 21 -#: rc.cpp:89 -#, no-c-format -msgid "" -"Many modern fonts contain "font hinting" information which can be " -"used to improve the appearance of a font on low-resolution displays, such as a " -"computer monitor, or a notebook screen. However, many people find the " -""improved" fonts quite ugly and prefer to have this option disabled." +"

The Ghostview program, which KDVI uses internally to display the " +"PostScript graphics that is included in this DVI file, is generally able to " +"write its output in a variety of formats. The sub-programs that Ghostview " +"uses for these tasks are called 'device drivers'; there is one device driver " +"for each format that Ghostview is able to write. Different versions of " +"Ghostview often have different sets of device drivers available. It seems " +"that the version of Ghostview that is installed on this computer does not " +"contain any of the device drivers that are known to KDVI.

It seems unlikely that a regular installation of Ghostview would not " +"contain these drivers. This error may therefore point to a serious " +"misconfiguration of the Ghostview installation on your computer.

If " +"you want to fix the problems with Ghostview, you can use the command " +"gs --help to display the list of device drivers contained " +"in Ghostview. Among others, KDVI can use the 'png256', 'jpeg' and 'pnm' " +"drivers. Note that KDVI needs to be restarted to re-enable PostScript " +"support.

" msgstr "" #: special.cpp:39 @@ -1069,8 +890,8 @@ msgstr "Зиёда аз 25 хатоги карда шуд .Хатогиҳои о #: special.cpp:224 msgid "" -"Error in DVIfile '%1', page %2. Color pop command issued when the color stack " -"is empty." +"Error in DVIfile '%1', page %2. Color pop command issued when the color " +"stack is empty." msgstr "" "Хатоги дар файли DVI '%1,саҳифаи %2.Фармони \"pop\"барои ранг дар вақти " "набудани рангҳо дар тозиёна." @@ -1157,13 +978,196 @@ msgstr " гузарондан." msgid "Wrong command byte found in VF macro list: %1" msgstr "Фармони нодурусти байт дар рӯйхати макро VF ёфта шуд: %1" -#: tips.txt:3 +#: kdvi.kcfg:10 +#, fuzzy, no-c-format +msgid "" +"Use MetaFont to generate missing fonts. If in doubt, enable this option." +msgstr "Даровардани ин опсия, агар шубҳа карданд." + +#: kdvi.kcfg:11 +#, no-c-format +msgid "" +"Allows KDVI to use MetaFont to produce bitmap fonts. Unless you have a very " +"specific reason, you probably want to enable this option." +msgstr "" + +#: kdvi.kcfg:15 +#, fuzzy, no-c-format +msgid "Show PostScript specials. If in doubt, enable this option." +msgstr "Даровардани ин опсия, агар шубҳа карданд." + +#: kdvi.kcfg:16 optionDialogSpecialWidget_base.ui:33 +#, no-c-format +msgid "" +"Some DVI files contain PostScript graphics. If enabled, KDVI will use the " +"Ghostview PostScript interpreter to display these. You probably want to " +"enable this option, unless you have a DVI-file whose PostScript part is " +"broken, or too large for your machine." +msgstr "" + +#: kdvi.kcfg:20 +#, fuzzy, no-c-format +msgid "" +"Use font hinting. You should enable this, if the use of font hinting " +"improves readability on your machine." +msgstr "" +"Шумо метавонед ба кор даровардани ишораи ҳуруфро санҷед ,чи хеле , ки " +"онлавозимоти заруриро барои хондани ҳуҷатҳо баланд месозад." + +#: kdvi.kcfg:21 +#, no-c-format +msgid "" +"Many modern fonts contain "font hinting" information which can be " +"used to improve the appearance of a font on low-resolution displays, such as " +"a computer monitor, or a notebook screen. However, many people find the " +""improved" fonts quite ugly and prefer to have this option " +"disabled." +msgstr "" + +#: kdvi_part.rc:4 +#, fuzzy, no-c-format +msgid "&File" +msgstr "Файли DVI" + +#: kdvi_part.rc:6 +#, no-c-format +msgid "Export As" +msgstr "Содироти ҳамчун" + +#: kdvi_part.rc:12 +#, fuzzy, no-c-format +msgid "&Edit" +msgstr "Муҳаррир:" + +#: kdvi_part.rc:17 +#, no-c-format +msgid "&Settings" +msgstr "" + +#: kdvi_part.rc:21 +#, no-c-format +msgid "&Help" +msgstr "" + +#: optionDialogFontsWidget_base.ui:28 +#, fuzzy, no-c-format +msgid "Use font hinting for Type 1 fonts, if available" +msgstr "Ҳарфи истифода кардан Type1, агар ин дастрас" + +#: optionDialogFontsWidget_base.ui:31 +#, no-c-format msgid "" -"

...that KDVI can also load compressed DVI-files? \n" +"You should enable this, if the use of font hinting improves readability on " +"your machine." +msgstr "" +"Шумо метавонед ба кор даровардани ишораи ҳуруфро санҷед ,чи хеле , ки " +"онлавозимоти заруриро барои хондани ҳуҷатҳо баланд месозад." + +#: optionDialogFontsWidget_base.ui:34 +#, no-c-format +msgid "" +"Many modern fonts contain \"font hinting\" information which can be used to " +"improve the appearance of a font on low-resolution displays, such as a " +"computer monitor, or a notebook screen. However, many people find the " +"\"improved\" fonts quite ugly and prefer to have this option disabled." +msgstr "" + +#: optionDialogSpecialWidget_base.ui:27 +#, no-c-format +msgid "Show PostScript specials" +msgstr "PostScript даровардани нишон додан" + +#: optionDialogSpecialWidget_base.ui:30 +#, no-c-format +msgid "If in doubt, enable this option." +msgstr "Даровардани ин опсия, агар шубҳа карданд." + +#: optionDialogSpecialWidget_base.ui:41 +#, no-c-format +msgid "Editor for Inverse Search" +msgstr "Муҳаррири барои бозгашти ҷустуҷӯ" + +#: optionDialogSpecialWidget_base.ui:60 +#, no-c-format +msgid "Choose an editor which is used in inverse search." +msgstr "Интиҳоби муҳаррир барои ҷустуҷӯи бозгашт." + +#: optionDialogSpecialWidget_base.ui:63 +#, no-c-format +msgid "" +"

Some DVI files contain 'inverse search' information. If such a DVI file " +"is loaded, you can right-click into KDVI and an editor will open, load the " +"TeX file and jump to the correct position. You can select your favorite " +"editor here. If in doubt, 'nedit' is usually a good choice.

\n" +"

Check the KDVI manual to see how to prepare DVI files which support the " +"inverse search.

" +msgstr "" + +#: optionDialogSpecialWidget_base.ui:80 +#, no-c-format +msgid "Description:" +msgstr "Тасвир:" + +#: optionDialogSpecialWidget_base.ui:96 +#, no-c-format +msgid "Shell command:" +msgstr "Фармони сар додан:" + +#: optionDialogSpecialWidget_base.ui:115 +#, no-c-format +msgid "" +"Explains about the editor's capabilities in conjunction with inverse search." +msgstr "Тасвир кардани мувофиқати муҳарир бо кофтукоби ақиб." + +#: optionDialogSpecialWidget_base.ui:118 +#, no-c-format +msgid "" +"

Not all editors are well suited for inverse search. For instance, many " +"editors have no command like 'If the file is not yet loaded, load it. " +"Otherwise, bring the window with the file to the front'. If you are using an " +"editor like this, clicking into the DVI file will always open a new editor, " +"even if the TeX file is already open. Likewise, many editors have no command " +"line argument that would allow KDVI to specify the exact line which you wish " +"to edit.

\n" +"

If you feel that KDVI's support for a certain editor is inadequate, " +"please contact the Trinity developers at www.trinitydesktop.org.

" +msgstr "" + +#: optionDialogSpecialWidget_base.ui:135 +#, no-c-format +msgid "Shell-command line used to start the editor." +msgstr "" +"Фармони \"Sell\" барои ба кор даровардани муҳарир истифода бурда мешавад." + +#: optionDialogSpecialWidget_base.ui:138 +#, no-c-format +msgid "" +"If you are using inverse search, KDVI uses this command line to start the " +"editor. The field '%f' is replaced with the filename, and '%l' is replaced " +"with the line number." +msgstr "" + +#: optionDialogSpecialWidget_base.ui:154 +#, no-c-format +msgid "Editor:" +msgstr "Муҳаррир:" + +#: optionDialogSpecialWidget_base.ui:170 +#, no-c-format +msgid "What is 'inverse search'? " +msgstr "Чист 'ҷустуҷӯи бозгашт'? " + +#: optionDialogSpecialWidget_base.ui:176 +#, no-c-format +msgid "inv-search" +msgstr "Ҷустуҷӯи бозгашт" + +#: tips:3 +msgid "

...that KDVI can also load compressed DVI-files? \n" msgstr "" "

...чи KDVI акнун иҷозат медиҳад,ки файли мухтасари DVI кушода шавад? \n" -#: tips.txt:8 +#: tips:9 msgid "" "

...that you can mark text with the right mouse button and paste it\n" "into any application?\n" @@ -1171,30 +1175,31 @@ msgstr "" "

...чи шумо метавонед матнро бо тугмаи рости мушак ҷудо кунед ва онро ба " "гузориши дилхоҳ гузоред?\n" -#: tips.txt:14 +#: tips:16 msgid "" -"

...that KDVI now supports inverse search? You can click into your DVI file \n" +"

...that KDVI now supports inverse search? You can click into your DVI " +"file \n" "with the middle mouse button and your editor opens, loads the TeX file, and\n" "jumps to the proper line! The \n" "manual explains how to set up your editor for this. \n" msgstr "" -#: tips.txt:22 +#: tips:25 msgid "" -"

...that KDVI supports forward search? If you use Emacs or XEmacs, you can \n" +"

...that KDVI supports forward search? If you use Emacs or XEmacs, you " +"can \n" "jump directly from the TeX file to the associated place in the DVI file. \n" -"The manual explains how to set up \n" +"The manual explains how to set " +"up \n" "your editor for this. \n" msgstr "" -#: tips.txt:30 -msgid "" -"

...that KDVI now offers full text search? \n" -msgstr "" -"

...ин KDVI ҳоло барои кофтани матн имкон медиҳад? \n" +#: tips:34 +msgid "

...that KDVI now offers full text search? \n" +msgstr "

...ин KDVI ҳоло барои кофтани матн имкон медиҳад? \n" -#: tips.txt:35 +#: tips:40 msgid "" -"

...that KDVI can save your DVI file as PostScript, PDF, and even plain text? " -"\n" +"

...that KDVI can save your DVI file as PostScript, PDF, and even plain " +"text? \n" msgstr "" -- cgit v1.2.1