From 9f19f32b78ac2bde5437604a8c9bcebd3a727147 Mon Sep 17 00:00:00 2001
From: TDE Weblate Depending on configuration, this "
+"view shows the call graph environment of the active function. Note: the "
+"shown cost is only the cost which is spent while the active function "
+"was actually running; i.e. the cost shown for main() - if it's visible - "
+"should be the same as the cost of the active function, as that's the part of "
+"inclusive cost of main() spent while the active function was running."
+"p> For cycles, blue call arrows indicate that this is an artificial call "
+"added for correct drawing which actually never happened. If the graph "
+"is larger than the widget area, an overview panner is shown in one edge. "
+"There are similar visualization options to the Call Treemap; the selected "
+"function is highlighted. "
+msgstr ""
-#: tabview.cpp:300
-msgid "Call Graph"
-msgstr "Намоиши дархост"
+#: callgraphview.cpp:1789
+msgid ""
+"Warning: a long lasting graph layouting is in progress.\n"
+"Reduce node/edge limits for speedup.\n"
+msgstr ""
-#: tabview.cpp:303
-msgid "Callees"
+#: callgraphview.cpp:1792
+msgid "Layouting stopped.\n"
msgstr ""
-#: tabview.cpp:306
-msgid "All Callees"
+#: callgraphview.cpp:1794
+msgid "The call graph has %1 nodes and %2 edges.\n"
msgstr ""
-#: tabview.cpp:310
-msgid "Callee Map"
+#: callgraphview.cpp:1827
+msgid "No item activated for which to draw the call graph."
msgstr ""
-#: instrview.cpp:131 tabview.cpp:313
-msgid "Assembler"
-msgstr "Ассемблер"
+#: callgraphview.cpp:1838
+msgid "No call graph can be drawn for the active item."
+msgstr ""
-#: tabview.cpp:553
+#: callgraphview.cpp:1867
msgid ""
-"Information Tabs"
-" This widget shows information for the current selected function in different "
-"tabs: "
-""
-"
For more information, see the "
-"What's This? help of the corresponding tab widget
This graph shows the nested hierarchy of all callers of " +"the current activated function. Each colored rectangle represents a " +"function; its size tries to be proportional to the cost spent therein while " +"the active function is running (however, there are drawing constrains).
" +msgstr "" -#. i18n: file dumpselectionbase.ui line 160 -#: rc.cpp:114 rc.cpp:237 -#, no-c-format -msgid "Jumps" -msgstr "Париданҳо" +#: callmapview.cpp:105 +msgid "" +"Call MapThis graph shows the nested hierarchy of all callees of " +"the current activated function. Each colored rectangle represents a " +"function; its size tries to be proportional to the cost spent therein while " +"the active function is running (however, there are drawing constrains).
" +msgstr "" -#. i18n: file dumpselectionbase.ui line 174 -#: rc.cpp:117 -#, no-c-format -msgid "Instructions" -msgstr "Дастурҳо" +#: callmapview.cpp:113 +msgid "" +"Appearance options can be found in the in the context menu. To get exact " +"size proportions, choose 'Hide incorrect borders'. As this mode can be " +"very time consuming, you may want to limit the maximum drawn " +"nesting level before. 'Best' determinates the split direction for children " +"from the aspect ratio of the parent. 'Always Best' decides on remaining " +"space for each sibling. 'Ignore Proportions' takes space for function name " +"drawing before drawing children. Note that size proportions can get " +"heavily wrong.
This is a TreeMap widget. Keyboard " +"navigation is available with the left/right arrow keys for traversing " +"siblings, and up/down arrow keys to go a nesting level up/down. Return" +"em> activates the current item.
" +msgstr "" -#. i18n: file dumpselectionbase.ui line 189 -#: rc.cpp:120 rc.cpp:240 -#, no-c-format -msgid "Events" -msgstr "Воқеъа" +#: callmapview.cpp:167 +msgid "Go To" +msgstr "Гузаштан ба" -#. i18n: file dumpselectionbase.ui line 202 -#: rc.cpp:123 -#, no-c-format -msgid "Full Cache" -msgstr "Захираи махфӣ пур" +#: callmapview.cpp:184 +msgid "Stop at Depth" +msgstr "Истодан дар чуқурӣ" -#. i18n: file dumpselectionbase.ui line 216 -#: rc.cpp:126 -#, no-c-format -msgid "Custom" -msgstr "Оддӣ" +#: callmapview.cpp:187 treemap.cpp:3101 +msgid "No Depth Limit" +msgstr "Ҳудуди чуқурӣ нест" -#. i18n: file dumpselectionbase.ui line 231 -#: rc.cpp:129 -#, no-c-format -msgid "Collect" -msgstr "Ҷамъ кардан" +#: callmapview.cpp:190 +msgid "Depth 10" +msgstr "Чуқурии 10" -#. i18n: file dumpselectionbase.ui line 244 -#: rc.cpp:132 -#, no-c-format -msgid "At Startup" -msgstr "" +#: callmapview.cpp:192 +msgid "Depth 15" +msgstr "Чуқурии 15" -#. i18n: file dumpselectionbase.ui line 258 -#: rc.cpp:135 -#, no-c-format -msgid "While In" +#: callmapview.cpp:194 +msgid "Depth 20" +msgstr "Чуқурии 20" + +#: callmapview.cpp:198 treemap.cpp:3107 +msgid "Depth of '%1' (%2)" +msgstr "Чуқурии '%1' (%2)" + +#: callmapview.cpp:204 +msgid "Decrement Depth (to %1)" +msgstr "Чуқурии афзундиҳандаи манфӣ (то %1)" + +#: callmapview.cpp:205 +msgid "Increment Depth (to %1)" msgstr "" -#. i18n: file dumpselectionbase.ui line 273 -#: rc.cpp:138 -#, no-c-format -msgid "Skip" -msgstr "Рад кардан" +#: callmapview.cpp:209 +msgid "Stop at Function" +msgstr "Истодан дар функсия" -#. i18n: file dumpselectionbase.ui line 286 -#: rc.cpp:141 -#, no-c-format -msgid "PLT" -msgstr "PLT" +#: callmapview.cpp:210 +msgid "No Function Limit" +msgstr "Ҳудуди функсия нест" -#. i18n: file dumpselectionbase.ui line 315 -#: rc.cpp:147 -#, no-c-format -msgid "Dump Profile" -msgstr "Тахассуси нусхабардорӣ" +#: callmapview.cpp:240 +msgid "Stop at Area" +msgstr "Истодан дар фазо" -#. i18n: file dumpselectionbase.ui line 328 -#: rc.cpp:150 -#, no-c-format -msgid "Every BBs" -msgstr "Ҳамаи BB-ҳо" +#: callmapview.cpp:243 treemap.cpp:3039 +msgid "No Area Limit" +msgstr "Ҳудуди фазо нест" -#. i18n: file dumpselectionbase.ui line 342 -#: rc.cpp:153 rc.cpp:162 -#, no-c-format -msgid "On Entering" -msgstr "" +#: callmapview.cpp:246 +msgid "50 Pixels" +msgstr "50 пиксел" -#. i18n: file dumpselectionbase.ui line 356 -#: rc.cpp:156 -#, no-c-format -msgid "On Leaving" -msgstr "" +#: callmapview.cpp:248 +msgid "100 Pixels" +msgstr "100 пиксел" -#. i18n: file dumpselectionbase.ui line 371 -#: rc.cpp:159 -#, no-c-format -msgid "Zero Events" -msgstr "Нолто воқеа" +#: callmapview.cpp:250 +msgid "200 Pixels" +msgstr "200 пиксел" -#. i18n: file dumpselectionbase.ui line 399 -#: rc.cpp:165 -#, no-c-format -msgid "Separate" -msgstr "Ҷудо кардан" +#: callmapview.cpp:252 +msgid "500 Pixels" +msgstr "500 пиксел" -#. i18n: file dumpselectionbase.ui line 412 -#: rc.cpp:168 -#, no-c-format -msgid "Threads" -msgstr "Бандҳо" +#: callmapview.cpp:258 treemap.cpp:3045 +msgid "Area of '%1' (%2)" +msgstr "Фазои '%1' (%2)" -#. i18n: file dumpselectionbase.ui line 426 -#: rc.cpp:171 -#, no-c-format -msgid "Recursions" -msgstr "Бозгаштҳо" +#: callmapview.cpp:264 treemap.cpp:3071 +msgid "Double Area Limit (to %1)" +msgstr "Дучанда кардани ҳудуди фазо (то %1)" -#. i18n: file dumpselectionbase.ui line 440 -#: rc.cpp:174 -#, no-c-format -msgid "Call Chain" -msgstr "Паёпаӣ дархост" +#: callmapview.cpp:266 +msgid "Half Area Limit (to %1)" +msgstr "Ду тақсим кардани ҳудуди фазо (то %1)" -#. i18n: file dumpselectionbase.ui line 470 -#: rc.cpp:177 -#, no-c-format -msgid "Custom profiler options:" +#: callmapview.cpp:273 +msgid "Visualisation" +msgstr "Таҷассумкорӣ" + +#: callmapview.cpp:277 +msgid "Split Direction" msgstr "" -#. i18n: file dumpselectionbase.ui line 508 -#: rc.cpp:180 -#, no-c-format -msgid "Run New Profile" +#: callmapview.cpp:279 +msgid "Skip Incorrect Borders" msgstr "" -#. i18n: file dumpselectionbase.ui line 520 -#: rc.cpp:183 -#, no-c-format -msgid "Info" -msgstr "Маълумот" +#: callmapview.cpp:284 +msgid "Border Width" +msgstr "Бари сарҳад" -#. i18n: file dumpselectionbase.ui line 531 -#: rc.cpp:186 -#, no-c-format -msgid "Dump reason:" -msgstr "Тахассуси далел:" +#: callmapview.cpp:285 +msgid "Border 0" +msgstr "Сарҳади 0" -#. i18n: file dumpselectionbase.ui line 544 -#: rc.cpp:189 -#, no-c-format -msgid "Event summary:" -msgstr "Натиҷаи ҷамбаст:" +#: callmapview.cpp:288 +msgid "Border 1" +msgstr "Сарҳади 1" -#. i18n: file dumpselectionbase.ui line 550 -#: callmapview.cpp:59 partselection.cpp:58 rc.cpp:192 -#, no-c-format -msgid "Name" -msgstr "Ном" +#: callmapview.cpp:290 +msgid "Border 2" +msgstr "Сарҳади 2" -#. i18n: file dumpselectionbase.ui line 561 -#: rc.cpp:195 -#, no-c-format -msgid "Sum" -msgstr "Натиҷа" +#: callmapview.cpp:292 +msgid "Border 3" +msgstr "Сарҳади 3" -#. i18n: file dumpselectionbase.ui line 579 -#: rc.cpp:198 -#, no-c-format -msgid "Miscellaneous:" -msgstr "Гуногун:" +#: callmapview.cpp:297 +msgid "Draw Symbol Names" +msgstr "Кашидани номҳои рамз" -#. i18n: file dumpselectionbase.ui line 617 -#: rc.cpp:201 -#, no-c-format -msgid "Show" -msgstr "Нишон додан" +#: callmapview.cpp:298 +msgid "Draw Cost" +msgstr "Кашидани нарх" -#. i18n: file dumpselectionbase.ui line 625 -#: rc.cpp:204 -#, no-c-format -msgid "Compare" -msgstr "Муқоиса кардан" +#: callmapview.cpp:299 +msgid "Draw Location" +msgstr "Кашидани ҷойгиршавӣ" -#. i18n: file dumpselectionbase.ui line 637 -#: rc.cpp:207 -#, no-c-format -msgid "State" -msgstr "Ҳолат" +#: callmapview.cpp:300 +msgid "Draw Calls" +msgstr "Кашидани сигналҳо" -#. i18n: file dumpselectionbase.ui line 656 -#: rc.cpp:210 -#, no-c-format -msgid "Update" -msgstr "" +#: callmapview.cpp:303 partselection.cpp:342 +msgid "Ignore Proportions" +msgstr "Аҳамият надодани таносуб" -#. i18n: file dumpselectionbase.ui line 664 -#: rc.cpp:213 -#, no-c-format -msgid "Every [s]:" -msgstr "Ҳама:" +#: callmapview.cpp:304 partselection.cpp:344 treemap.cpp:2887 +msgid "Allow Rotation" +msgstr "Иҷозат додани даврзанӣ" -#. i18n: file dumpselectionbase.ui line 677 -#: rc.cpp:216 -#, no-c-format -msgid "Counter" -msgstr "Шуморанда" +#: callmapview.cpp:321 treemap.cpp:2889 +msgid "Shading" +msgstr "Соякунӣ" -#. i18n: file dumpselectionbase.ui line 699 -#: rc.cpp:222 -#, no-c-format -msgid "Dumps Done" -msgstr "" +#: callmapview.cpp:431 +msgid "Call Map: Current is '%1'" +msgstr "Харитаи сигнал: '%1' ҷорӣ аст" -#. i18n: file dumpselectionbase.ui line 713 -#: rc.cpp:225 -#, no-c-format -msgid "Is Collecting" -msgstr "" +#: callmapview.cpp:599 +msgid "(no function)" +msgstr "(функсия нест)" -#. i18n: file dumpselectionbase.ui line 727 -#: rc.cpp:228 -#, no-c-format -msgid "Executed" -msgstr "Иҷро кард" +#: callmapview.cpp:741 callmapview.cpp:858 +msgid "(no call)" +msgstr "(дархост нест)" -#. i18n: file dumpselectionbase.ui line 740 -#: rc.cpp:231 -#, no-c-format -msgid "Basic Blocks" -msgstr "" +#: callview.cpp:45 instrview.cpp:127 sourceview.cpp:52 +msgid "Cost 2" +msgstr "Нархи 2" -#. i18n: file dumpselectionbase.ui line 754 -#: callmapview.cpp:63 rc.cpp:234 rc.cpp:339 -#, no-c-format -msgid "Calls" -msgstr "Алоқаҳо" +#: callview.cpp:47 callview.cpp:51 +msgid "Count" +msgstr "Ҳисоб кардан" -#. i18n: file dumpselectionbase.ui line 796 -#: rc.cpp:243 -#, no-c-format -msgid "Ir" +#: callview.cpp:48 coverageview.cpp:50 +msgid "Caller" +msgstr "Дархосткунанда" + +#: callview.cpp:52 coverageview.cpp:56 +msgid "Callee" msgstr "" -#. i18n: file dumpselectionbase.ui line 811 -#: rc.cpp:246 -#, no-c-format -msgid "Distinct" -msgstr "Саҳеҳ" +#: callview.cpp:85 +msgid "" +"List of direct CallersThis list shows all functions calling the " +"current selected one directly, together with a call count and the cost spent " +"in the current selected function while being called from the function from " +"the list.
An icon instead of an inclusive cost specifies that this is " +"a call inside of a recursive cycle. An inclusive cost makes no sense here." +"p>
Selecting a function makes it the current selected one of this " +"information panel. If there are two panels (Split mode), the function of the " +"other panel is changed instead.
" +msgstr "" + +#: callview.cpp:98 +msgid "" +"List of direct CalleesThis list shows all functions called by the " +"current selected one directly, together with a call count and the cost spent " +"in this function while being called from the selected function." +"p>
Selecting a function makes it the current selected one of this " +"information panel. If there are two panels (Split mode), the function of the " +"other panel is changed instead.
" +msgstr "" -#. i18n: file dumpselectionbase.ui line 824 -#: configdlg.cpp:58 rc.cpp:249 +#: configdlg.cpp:58 dumpselectionbase.ui:824 #, no-c-format msgid "ELF Objects" msgstr "Объектҳои ELF" -#. i18n: file dumpselectionbase.ui line 838 -#: rc.cpp:252 -#, no-c-format -msgid "Functions" -msgstr "Функсияҳо" +#: configdlg.cpp:60 +msgid "Source Files" +msgstr "Файлҳои сарчашма" -#. i18n: file dumpselectionbase.ui line 852 -#: rc.cpp:255 -#, no-c-format -msgid "Contexts" -msgstr "" +#: configdlg.cpp:61 +msgid "C++ Classes" +msgstr "Синфҳои C++" -#. i18n: file dumpselectionbase.ui line 890 -#: rc.cpp:258 -#, no-c-format -msgid "Stack trace:" -msgstr "Паи анбора:" +#: configdlg.cpp:62 +msgid "Function (no Grouping)" +msgstr "Функсия (Ба гурӯҳҳо ҷудокунӣ нест)" -#. i18n: file dumpselectionbase.ui line 898 -#: rc.cpp:261 -#, no-c-format -msgid "Sync." -msgstr "Синхр." +#: configdlg.cpp:157 configdlg.cpp:350 configdlg.cpp:371 +msgid "(always)" +msgstr "(ҳамавақт)" -#. i18n: file dumpselectionbase.ui line 906 -#: instrview.cpp:125 rc.cpp:264 sourceview.cpp:50 -#, no-c-format -msgid "#" -msgstr "#" +#: configdlg.cpp:210 +msgid "KCachegrind Configuration" +msgstr "Танзимоти KCachegrind" -#. i18n: file dumpselectionbase.ui line 917 -#: costtypeview.cpp:43 coverageview.cpp:46 partview.cpp:47 rc.cpp:267 -#: rc.cpp:309 -#, no-c-format -msgid "Incl." -msgstr "Шомил." +#: configdlg.cpp:211 +msgid "" +"The Maximum Number of List Items should be below 500.The previous set value " +"(%1) will still be used." +msgstr "" -#. i18n: file dumpselectionbase.ui line 928 -#: coverageview.cpp:49 partview.cpp:49 rc.cpp:270 rc.cpp:315 -#, no-c-format -msgid "Called" +#: configdlg.cpp:384 +msgid "Choose Source Folder" +msgstr "Феҳристи сарчашмаро интихоб кунед" + +#: configuration.cpp:67 +msgid "Instruction Fetch" msgstr "" -#. i18n: file dumpselectionbase.ui line 950 -#: callmapview.cpp:61 rc.cpp:276 rc.cpp:321 -#, no-c-format -msgid "Location" -msgstr "Ҷойгиршавӣ" +#: configuration.cpp:68 +msgid "Data Read Access" +msgstr "Истеъдоди ҳуқуқро хонед" -#. i18n: file dumpselectionbase.ui line 976 -#: rc.cpp:279 -#, no-c-format -msgid "Start" -msgstr "Сар кардан" +#: configuration.cpp:69 +msgid "Data Write Access" +msgstr "Истеъдоди ҳуқуқро нависед" -#. i18n: file dumpselectionbase.ui line 1001 -#: rc.cpp:282 -#, no-c-format -msgid "Zero" -msgstr "Нул" +#: configuration.cpp:70 +msgid "L1 Instr. Fetch Miss" +msgstr "" -#. i18n: file dumpselectionbase.ui line 1009 -#: rc.cpp:285 -#, no-c-format -msgid "Dump" -msgstr "Нусхабардорӣ" +#: configuration.cpp:71 +msgid "L1 Data Read Miss" +msgstr "L1 Истеъдоди гузаронданро хонед" -#. i18n: file dumpselectionbase.ui line 1021 -#: rc.cpp:288 -#, no-c-format -msgid "Messages" -msgstr "Хабарҳо" +#: configuration.cpp:72 +msgid "L1 Data Write Miss" +msgstr "L1 Истеъдоди гузаронданро нависед" -#. i18n: file dumpselectionbase.ui line 1045 -#: rc.cpp:291 -#, no-c-format -msgid "Kill Run" -msgstr "Нест кардани сардиҳӣ" +#: configuration.cpp:73 +msgid "L2 Instr. Fetch Miss" +msgstr "" -#. i18n: file functionselectionbase.ui line 16 -#: rc.cpp:297 toplevel.cpp:594 -#, no-c-format -msgid "Function Profile" -msgstr "Тахассуси функсия" +#: configuration.cpp:74 +msgid "L2 Data Read Miss" +msgstr " L2 Истеъдоди гузаронданро хонед" -#. i18n: file functionselectionbase.ui line 41 -#: rc.cpp:300 +#: configuration.cpp:75 +msgid "L2 Data Write Miss" +msgstr "L2 Истеъдоди гузаронданро нависед" + +#: configuration.cpp:76 +msgid "LL Instr. Fetch Miss" +msgstr "" + +#: configuration.cpp:77 +#, fuzzy +msgid "LL Data Read Miss" +msgstr "L1 Истеъдоди гузаронданро хонед" + +#: configuration.cpp:78 +#, fuzzy +msgid "LL Data Write Miss" +msgstr "L1 Истеъдоди гузаронданро нависед" + +#: configuration.cpp:79 +msgid "Samples" +msgstr "Намунаҳо" + +#: configuration.cpp:80 +msgid "System Time" +msgstr "Вақти система" + +#: configuration.cpp:81 +msgid "User Time" +msgstr "Вақти истифодабаранда" + +#: configuration.cpp:82 +msgid "L1 Miss Sum" +msgstr "L1 Ҳосили ҷамъи гузаронда" + +#: configuration.cpp:83 +msgid "L2 Miss Sum" +msgstr " L2 Ҳосили ҷамъи гузаронда" + +#: configuration.cpp:84 +#, fuzzy +msgid "LL Miss Sum" +msgstr "L1 Ҳосили ҷамъи гузаронда" + +#: configuration.cpp:85 +msgid "Cycle Estimation" +msgstr "Ҷамъбасти давр" + +#: costlistitem.cpp:60 +#, c-format +msgid "" +"_n: (%n item skipped)\n" +"(%n items skipped)" +msgstr "" +"(%n чиз рад карда шудааст)\n" +"(%n чиз рад карда шудааст)" + +#: costtypeitem.cpp:56 +msgid "Unknown Type" +msgstr "Навъи номаълум" + +#: costtypeview.cpp:42 +msgid "Event Type" +msgstr "Навъи воқеъа" + +#: costtypeview.cpp:43 coverageview.cpp:46 dumpselectionbase.ui:917 +#: functionselectionbase.ui:103 partview.cpp:47 #, no-c-format -msgid "&Search:" -msgstr "&Ҷустуҷӯ:" +msgid "Incl." +msgstr "Шомил." -#. i18n: file functionselectionbase.ui line 62 -#: costtypeview.cpp:44 coverageview.cpp:53 partview.cpp:48 rc.cpp:303 -#: rc.cpp:312 +#: costtypeview.cpp:44 coverageview.cpp:53 functionselectionbase.ui:62 +#: functionselectionbase.ui:114 partview.cpp:48 #, no-c-format msgid "Self" msgstr "Аз они худ" -#. i18n: file functionselectionbase.ui line 73 -#: rc.cpp:306 -#, no-c-format -msgid "Group" -msgstr "Гурӯҳ" +#: costtypeview.cpp:45 +msgid "Short" +msgstr "Кӯтоҳ" -#. i18n: file partselectionbase.ui line 16 -#: rc.cpp:324 toplevel.cpp:276 toplevel.cpp:576 -#, no-c-format -msgid "Parts Overview" -msgstr "Аз назар гузарондани қисмҳо" +#: costtypeview.cpp:47 +msgid "Formula" +msgstr "Формула" -#. i18n: file partselectionbase.ui line 60 -#: rc.cpp:327 -#, no-c-format -msgid "(no trace parts)" -msgstr "(қисмҳои пай нест)" +#: costtypeview.cpp:81 +msgid "" +"Cost Types ListThis list shows all cost types available and what " +"the self/inclusive cost of the current selected function is for that cost " +"type.
By choosing a cost type from the list, you change the cost type " +"of costs shown all over KCachegrind to be the selected one.
" +msgstr "" -#. i18n: file stackselectionbase.ui line 16 -#: rc.cpp:330 -#, no-c-format -msgid "Stack Selection" -msgstr "Интихоб кардани анбора" +#: costtypeview.cpp:98 +msgid "Set Secondary Event Type" +msgstr "Танзим кардани навъи воқеъаи миёна" -#. i18n: file stackselectionbase.ui line 31 -#: callmapview.cpp:60 callview.cpp:44 instrview.cpp:126 partselection.cpp:59 -#: rc.cpp:333 sourceview.cpp:51 +#: costtypeview.cpp:100 +msgid "Remove Secondary Event Type" +msgstr "Дур кардани навъи воқеъаи миёна" + +#: costtypeview.cpp:105 +msgid "Edit Long Name" +msgstr "Таҳрир кардани номи дароз" + +#: costtypeview.cpp:106 +msgid "Edit Short Name" +msgstr "Таҳрир кардани номи кӯтоҳ" + +#: costtypeview.cpp:107 +msgid "Edit Formula" +msgstr "Таҳрир кардани формула" + +#: costtypeview.cpp:108 +msgid "Remove" +msgstr "" + +#: costtypeview.cpp:115 +msgid "New Cost Type ..." +msgstr "Навъи нархи нав ..." + +#: costtypeview.cpp:149 costtypeview.cpp:154 +#, c-format +msgid "New%1" +msgstr "%1-и нав" + +#: costtypeview.cpp:155 +#, c-format +msgid "New Cost Type %1" +msgstr "Навъи нархи нав %1" + +#: coverageitem.cpp:65 coverageitem.cpp:205 functionitem.cpp:72 +#, c-format +msgid "" +"_n: (%n function skipped)\n" +"(%n functions skipped)" +msgstr "" + +#: coverageview.cpp:48 coverageview.cpp:54 +msgid "Distance" +msgstr "Фосила" + +#: coverageview.cpp:49 dumpselectionbase.ui:928 functionselectionbase.ui:125 +#: partview.cpp:49 #, no-c-format -msgid "Cost" -msgstr "Нарх" +msgid "Called" +msgstr "" + +#: coverageview.cpp:55 +msgid "Calling" +msgstr "Дархостан" + +#: coverageview.cpp:90 +msgid "" +"List of all CallersThis list shows all functions calling the " +"current selected one, either directly or with several functions in-between " +"on the stack; the number of functions in-between plus one is called the " +"Distance (e.g. for function A,B,C there exists a call from A to C " +"when A calls B and B calls C, i.e. A => B => C. The distance here is 2)." +"p>
Absolute cost shown is the cost spent in the selected function while a " +"listed function is active; relative cost is the percentage of all cost spent " +"in the selected function while the listed one is active. The cost graphic " +"shows logarithmic percentage with a different color for each distance." +"p>
As there can be many calls from the same function, the distance column " +"sometimes shows the range of distances for all calls happening; then, in " +"parentheses, there is the medium distance, i.e. the distance where most of " +"the call costs happened.
Selecting a function makes it the current " +"selected one of this information panel. If there are two panels (Split " +"mode), the function of the other panel is changed instead.
" +msgstr "" -#. i18n: file stackselectionbase.ui line 42 -#: rc.cpp:336 +#: coverageview.cpp:120 +msgid "" +"List of all CalleesThis list shows all functions called by the " +"current selected one, either directly or with several function in-between on " +"the stack; the number of function in-between plus one is called the " +"Distance (e.g. for function A,B,C there exists a call from A to C " +"when A calls B and B calls C, i.e. A => B => C. The distance here is 2)." +"p>
Absolute cost shown is the cost spent in the listed function while the " +"selected is active; relative cost is the percentage of all cost spent in the " +"listed function while the selected one is active. The cost graphic always " +"shows logarithmic percentage with a different color for each distance." +"p>
As there can be many calls to the same function, the distance column " +"sometimes shows the range of distances for all calls happening; then, in " +"parentheses, there is the medium distance, i.e. the distance where most of " +"the call costs happened.
Selecting a function makes it the current " +"selected one of this information panel. If there are two panels (Split " +"mode), the function of the other panel is changed instead.
" +msgstr "" + +#: functionselection.cpp:52 toplevel.cpp:772 +msgid "(No Grouping)" +msgstr "(Ба гурӯҳҳо ҷудокунӣ нашуд)" + +#: functionselection.cpp:176 +#, c-format +msgid "Go to %1" +msgstr "Ба %1 гузаштан" + +#: functionselection.cpp:203 +msgid "Show All Items" +msgstr "Нишон додани ҳамаи чизҳо" + +#: functionselection.cpp:226 +msgid "No Grouping" +msgstr "" + +#: functionselection.cpp:243 toplevel.cpp:763 +msgid "Grouping" +msgstr "Ба гурӯҳҳо ҷудокунӣ" + +#: instritem.cpp:106 sourceitem.cpp:86 +msgid "Active call to '%1'" +msgstr "Сигнали фаъол ба '%1'" + +#: instritem.cpp:108 sourceitem.cpp:88 +msgid "" +"_n: %n call to '%1'\n" +"%n calls to '%1'" +msgstr "" +"%n сигнал ба '%1'\n" +"%n сигнал ба '%1'" + +#: instritem.cpp:137 +msgid "Jump %1 of %2 times to 0x%3" +msgstr "Гузаштан %1 аз %2 бор ба 0x%3" + +#: instritem.cpp:142 +msgid "Jump %1 times to 0x%2" +msgstr "Гузаштан %1 бор ба 0x%2" + +#: instritem.cpp:185 sourceitem.cpp:169 +msgid "(cycle)" +msgstr "(давр)" + +#: dumpselectionbase.ui:906 instrview.cpp:125 sourceview.cpp:50 #, no-c-format -msgid "Cost2" -msgstr "Нархи 2" +msgid "#" +msgstr "#" + +#: instrview.cpp:129 +msgid "Hex" +msgstr "Hex" + +#: instrview.cpp:131 tabview.cpp:313 +msgid "Assembler" +msgstr "Ассемблер" + +#: instrview.cpp:132 +msgid "Source Position" +msgstr "Вазъияти сарчашма" -#: partgraph.cpp:167 +#: instrview.cpp:163 +msgid "" +"Annotated AssemblerThe annotated assembler list shows the machine " +"code instructions of the current selected function together with (self) cost " +"spent while executing an instruction. If this is a call instruction, lines " +"with details on the call happening are inserted into the source: the cost " +"spent inside of the call, the number of calls happening, and the call " +"destination.
The disassembler output shown is generated with the " +"'objdump' utility from the 'binutils' package.
Select a line with call " +"information to make the destination function of this call current.
" +msgstr "" + +#: instrview.cpp:195 #, c-format -msgid "Profile Part %1" -msgstr "Қисми тахассус %1" +msgid "Go to Address %1" +msgstr "Ба суроғаи %1 гузаштан" -#: partgraph.cpp:226 -msgid "(no trace)" -msgstr "(пай нест)" +#: instrview.cpp:207 +msgid "Hex Code" +msgstr "Коди Hex" -#: partgraph.cpp:229 -msgid "(no part)" -msgstr "(қисм нест)" +#: instrview.cpp:426 +msgid "There is no instruction info in the profile data file." +msgstr "" -#: tips.txt:3 -msgid "" -"...that the What's This? help for every GUI widget\n" -"in KCachegrind contains detailed usage information for this widget?\n" -"It is highly recommended to read at least these help texts on first\n" -"use. Request What's This? help by pressing\n" -"Shift+F1 and clicking on the widget.
\n" +#: instrview.cpp:428 +msgid "For the Valgrind Calltree Skin, rerun with option" msgstr "" -#: tips.txt:12 -msgid "" -"...that you can get profile information at instruction level\n" -"with Calltree when you provide the option --dump-instr=yes?\n" -"Use the Assembler View for the instruction annotations.\n" -"
\n" +#: instrview.cpp:429 +msgid " --dump-instr=yes" msgstr "" -#: tips.txt:20 -msgid "" -"...that you can use Alt-Left/Right keys of your keyboard to go\n" -"back/forward in the active object history ?
\n" +#: instrview.cpp:430 +msgid "To see (conditional) jumps, additionally specify" msgstr "" -#: tips.txt:26 -msgid "" -"...that you can navigate in the Callee/Caller Map View using\n" -"arrow keys? Use Left/Right to change to siblings of the current\n" -"item; use Up/Down to go one nesting level up/down. To select\n" -"the current item, press Space, and to activate it, press Return.\n" -"
\n" +#: instrview.cpp:431 +msgid " --trace-jump=yes" +msgstr " --пай-гузаштан=ҳа" + +#: instrview.cpp:629 +msgid "There is an error trying to execute the command" msgstr "" -#: tips.txt:35 -msgid "" -"...that you can navigate in the Call Graph View using\n" -"arrow keys? Use Up/Down to go one calling level up/down, alternating\n" -"between calls and functions. Use Left/Right to change to siblings of a current\n" -"selected call. To activate the current item, press Return.\n" -"
\n" +#: instrview.cpp:634 instrview.cpp:900 +msgid "Check that you have installed 'objdump'." msgstr "" -#: tips.txt:44 -msgid "" -"...that you can rapidly locate a function by entering part of its\n" -"name (case-insensitive) into the edit line of the toolbar\n" -"and hit return?
\n" +#: instrview.cpp:636 instrview.cpp:902 +msgid "This utility can be found in the 'binutils' package." msgstr "" -#: tips.txt:51 +#: instrview.cpp:739 +msgid "(No Assembler)" +msgstr "(Ассемблер нест)" + +#: instrview.cpp:875 +#, c-format msgid "" -"...that you can assign custom colors to \n" -"ELF objects/C++ Classes/Source Files for graph coloring\n" -"in Settings->Configure KCachegrind...?
\n" +"_n: There is %n cost line without assembler code.\n" +"There are %n cost lines without assembler code." msgstr "" -#: tips.txt:58 -msgid "" -"...that you can see if debug info is available for a selected \n" -"function by looking at the location label in the Info tab or\n" -"the source listing header in the source tab?
\n" -"There must be the name of the source file (with extension).\n" -"If KCachegrind still doesn't show the source, make sure that you\n" -"have added the directory of the source file to the\n" -"Source Directories list in the configuration.\n" +#: instrview.cpp:877 +msgid "This happens because the code of" msgstr "" -#: tips.txt:69 -msgid "" -"
...that you can configure whether KCachgrind should\n" -"show absolute event counts or relative ones (percentage display)?
\n" +#: instrview.cpp:880 +msgid "does not seem to match the profile data file." msgstr "" -#: tips.txt:75 -msgid "" -"...that you can configure the maximum number of items\n" -"for all function lists in KCachegrind? Limiting the number\n" -"of items is done to get a fast reacting GUI. The last item in\n" -"the list will show you the number of skipped functions, together\n" -"with a cost condition for these skipped functions.
\n" -"To activate a function with small costs, search for it and select\n" -"it in the flat profile. Selecting functions with small cost will\n" -"temporarily add them to the flat profile list.
\n" +#: instrview.cpp:883 +msgid "Are you using an old profile data file or is the above mentioned" msgstr "" -#: tips.txt:87 -msgid "" -"...that the Coverage tab - in contrast to the Call Lists tab -\n" -"shows all functions that are calling the selected function\n" -"(upper part) / are called by the selected function (bottom part),\n" -"no matter how many function are between them on the stack?
\n" -"Examples:
\n" -"An entry in the upper list for function foo1() with a value of 50%\n" -"with function bar() selected means that 50% of all the cost of function\n" -"bar() happened while called from function foo1().
\n" -"An entry in the bottom list for function foo2() with a value of 50%\n" -"with function bar() selected means that 50% of all the cost of function\n" -"bar() happened while calling foo2() from bar().
\n" +#: instrview.cpp:885 +msgid "ELF object from an updated installation/another machine?" msgstr "" -#: tips.txt:102 -msgid "" -"...that waiting for the tool tip inside of a tree map\n" -"shows the list of names of the nested rectangles the mouse\n" -"pointer is over?
\n" -"Items from this list can be selected by pressing the right\n" -"mouse button.
\n" +#: instrview.cpp:893 +msgid "There seems to be an error trying to execute the command" msgstr "" -#: tips.txt:111 -msgid "" -"...that you can constrain the cost counts shown to only a\n" -"few parts of the whole trace by selecting these parts in the\n" -"\"Trace Selection\" Dockable?
\n" -"To generate multiple parts in a profiling run with\n" -"cachegrind, use e.g. option --cachedumps=xxx for parts\n" -"of a length of xxx basic blocks (A basic block is a run\n" -"of not-branching assembler statements inside of your program\n" -"code).
\n" +#: instrview.cpp:898 +msgid "Check that the ELF object used in the command exists." msgstr "" #: main.cpp:38 @@ -981,377 +999,378 @@ msgstr "(C) 2002, 2003, 2004" msgid "Author/Maintainer" msgstr "Муаллиф/Дастгиркунанда" -#: coverageitem.cpp:65 coverageitem.cpp:205 functionitem.cpp:72 +#: partgraph.cpp:167 #, c-format -msgid "" -"_n: (%n function skipped)\n" -"(%n functions skipped)" -msgstr "" +msgid "Profile Part %1" +msgstr "Қисми тахассус %1" -#: costlistitem.cpp:60 -#, c-format -msgid "" -"_n: (%n item skipped)\n" -"(%n items skipped)" -msgstr "" -"(%n чиз рад карда шудааст)\n" -"(%n чиз рад карда шудааст)" +#: partgraph.cpp:226 +msgid "(no trace)" +msgstr "(пай нест)" -#: _translatorinfo.cpp:1 -msgid "" -"_: NAME OF TRANSLATORS\n" -"Your names" -msgstr "" -"* НПО \"Имкониятҳои ҷавонон\" * Tajik Linux Users Group * Young Ladies Tajik " -"Linux Users Group * http://www.khujand.org * http://www.tajikngo.org * " -"http://www.yo-tj.org * Роҷер Ковакс, Виктор Ибрагимов, Марина Колючева, Евгения " -"Фатхеева, Акмал Ватаншоев, Абророва Хиромон, Акмал Саломов, Акбар Ватаншоев, " -"Фарход Ахмедов, Эркин Пулатов, Гулшод Довуди, Гулноз Курбанова, Зарина " -"Косымова, Шухрат Лоиқов, Сурайё Ҷурахонова *" +#: partgraph.cpp:229 +msgid "(no part)" +msgstr "(қисм нест)" -#: _translatorinfo.cpp:3 -msgid "" -"_: EMAIL OF TRANSLATORS\n" -"Your emails" -msgstr "" -"rkovacs@khujand.org, youth_opportunities@tajikngo.org, MarinaKL@tajikngo.org" +#: partgraph.cpp:423 tracedata.cpp:249 tracedata.cpp:254 tracedata.cpp:2824 +#: tracedata.cpp:3241 tracedata.cpp:3327 tracedata.cpp:4165 tracedata.cpp:4173 +#: tracedata.cpp:4238 +msgid "(unknown)" +msgstr "(номаълум)" -#: callmapview.cpp:98 -msgid "" -"Caller Map" -"This graph shows the nested hierarchy of all callers of the current " -"activated function. Each colored rectangle represents a function; its size " -"tries to be proportional to the cost spent therein while the active function is " -"running (however, there are drawing constrains).
" -msgstr "" +#: partlistitem.cpp:49 +msgid " (Thread %1)" +msgstr " (Ришта %1)" -#: callmapview.cpp:105 -msgid "" -"Call Map" -"This graph shows the nested hierarchy of all callees of the current " -"activated function. Each colored rectangle represents a function; its size " -"tries to be proportional to the cost spent therein while the active function is " -"running (however, there are drawing constrains).
" -msgstr "" +#: partlistitem.cpp:56 +msgid "(none)" +msgstr "(ҳеҷ)" -#: callmapview.cpp:113 -msgid "" -"Appearance options can be found in the in the context menu. To get exact " -"size proportions, choose 'Hide incorrect borders'. As this mode can be " -"very time consuming, you may want to limit the maximum drawn nesting level " -"before. 'Best' determinates the split direction for children from the aspect " -"ratio of the parent. 'Always Best' decides on remaining space for each sibling. " -"'Ignore Proportions' takes space for function name drawing before " -"drawing children. Note that size proportions can get heavily wrong.
" -"This is a TreeMap widget. Keyboard navigation is available with the " -"left/right arrow keys for traversing siblings, and up/down arrow keys to go a " -"nesting level up/down. Return activates the current item.
" +#: partselection.cpp:151 +msgid "Profile Part Overview: Current is '%1'" +msgstr "Аз назаргузаронии қисми тахассус: '%1' ҷорӣ аст" + +#: partselection.cpp:287 +msgid "Deselect" msgstr "" -#: callmapview.cpp:167 -msgid "Go To" -msgstr "Гузаштан ба" +#: partselection.cpp:287 partselection.cpp:311 +msgid "Select" +msgstr "Интихоб кардан" -#: callmapview.cpp:184 -msgid "Stop at Depth" -msgstr "Истодан дар чуқурӣ" +#: partselection.cpp:292 +msgid "Select All Parts" +msgstr "Интихоб кардани ҳамаи қисмҳо" -#: callmapview.cpp:187 treemap.cpp:3101 -msgid "No Depth Limit" -msgstr "Ҳудуди чуқурӣ нест" +#: partselection.cpp:294 +msgid "Visible Parts" +msgstr "Қисмҳои намоён" -#: callmapview.cpp:190 -msgid "Depth 10" -msgstr "Чуқурии 10" +#: partselection.cpp:296 +msgid "Hide Selected Parts" +msgstr "Пинҳон кардани қисмҳои интихобшуда" -#: callmapview.cpp:192 -msgid "Depth 15" -msgstr "Чуқурии 15" +#: partselection.cpp:297 +msgid "Unhide Hidden Parts" +msgstr "Кушодани қисмҳои пинҳоншуда" -#: callmapview.cpp:194 -msgid "Depth 20" -msgstr "Чуқурии 20" +#: partselection.cpp:302 toplevel.cpp:1687 +msgid "Go Back" +msgstr "Гузаштан ба қафо" -#: callmapview.cpp:198 treemap.cpp:3107 -msgid "Depth of '%1' (%2)" -msgstr "Чуқурии '%1' (%2)" +#: partselection.cpp:322 +msgid "Partitioning Mode" +msgstr "Ҳолати бахшбандӣ" + +#: partselection.cpp:323 +msgid "Diagram Mode" +msgstr "" + +#: partselection.cpp:324 +msgid "Zoom Function" +msgstr "Функсияи тағйири андозаи тасвир" + +#: partselection.cpp:325 +msgid "Show Direct Calls" +msgstr "Дархостҳои аниқро нишон диҳед" + +#: partselection.cpp:326 +msgid "Increment Shown Call Levels" +msgstr "" + +#: partselection.cpp:340 +msgid "Draw Names" +msgstr "Кашидани номҳо" -#: callmapview.cpp:204 -msgid "Decrement Depth (to %1)" -msgstr "Чуқурии афзундиҳандаи манфӣ (то %1)" +#: partselection.cpp:341 +msgid "Draw Costs" +msgstr "Кашидани нархҳо" -#: callmapview.cpp:205 -msgid "Increment Depth (to %1)" -msgstr "" +#: partselection.cpp:343 +#, fuzzy +msgid "Draw Frames" +msgstr "Кашидани номҳо" -#: callmapview.cpp:209 -msgid "Stop at Function" -msgstr "Истодан дар функсия" +#: partselection.cpp:359 +msgid "Hide Info" +msgstr "Пинҳон кардани маълумот" -#: callmapview.cpp:210 -msgid "No Function Limit" -msgstr "Ҳудуди функсия нест" +#: partselection.cpp:361 +msgid "Show Info" +msgstr "Нишон додани маълумот" -#: callmapview.cpp:240 -msgid "Stop at Area" -msgstr "Истодан дар фазо" +#: partselection.cpp:541 +msgid "(no trace loaded)" +msgstr "(пай пурбор нашуд)" -#: callmapview.cpp:243 treemap.cpp:3039 -msgid "No Area Limit" -msgstr "Ҳудуди фазо нест" +#: partview.cpp:46 tracedata.cpp:179 +msgid "Profile Part" +msgstr "Қисми тахассус" -#: callmapview.cpp:246 -msgid "50 Pixels" -msgstr "50 пиксел" +#: partview.cpp:51 +msgid "Comment" +msgstr "Тавзеҳ" -#: callmapview.cpp:248 -msgid "100 Pixels" -msgstr "100 пиксел" +#: partview.cpp:73 +msgid "" +"Trace Part ListThis list shows all trace parts of the loaded " +"trace. For each part, the self/inclusive cost of the current selected " +"function, spent in the part, is shown; percentage costs are always relative " +"to the total cost of the part (not to the whole trace as in the " +"Trace Part Overview). Also shown are the calls happening to/from the current " +"function inside of the trace part.
By choosing one or more trace parts " +"from the list, the costs shown all over KCachegrind will only be the ones " +"spent in the selected part(s). If no list selection is shown, in fact all " +"trace parts are selected implicitly.
This is a multi-selection list. " +"You can select ranges by dragging the mouse or use SHIFT/CTRL modifiers. " +"Selection/Deselection of trace parts can also be done by using the Trace " +"Part Overview Dockable. This one also supports multiple selection." +"p>
Note that the list is hidden if only one trace part is loaded.
" +msgstr "" -#: callmapview.cpp:250 -msgid "200 Pixels" -msgstr "200 пиксел" +#: partview.cpp:106 +msgid "Select '%1'" +msgstr "Интихоб кардани '%1'" -#: callmapview.cpp:252 -msgid "500 Pixels" -msgstr "500 пиксел" +#: partview.cpp:107 +msgid "Hide '%1'" +msgstr "Пинҳон кардани '%1'" -#: callmapview.cpp:258 treemap.cpp:3045 -msgid "Area of '%1' (%2)" -msgstr "Фазои '%1' (%2)" +#: partview.cpp:111 +msgid "Hide Selected" +msgstr "Пинҳон кардани интихобшуда" -#: callmapview.cpp:264 treemap.cpp:3071 -msgid "Double Area Limit (to %1)" -msgstr "Дучанда кардани ҳудуди фазо (то %1)" +#: partview.cpp:112 +msgid "Show All" +msgstr "Нишон додани ҳама" -#: callmapview.cpp:266 -msgid "Half Area Limit (to %1)" -msgstr "Ду тақсим кардани ҳудуди фазо (то %1)" +#: sourceitem.cpp:125 +msgid "Jump %1 of %2 times to %3" +msgstr "Гузаштан %1 аз %2 бор ба %3" -#: callmapview.cpp:273 -msgid "Visualisation" -msgstr "Таҷассумкорӣ" +#: sourceitem.cpp:130 +msgid "Jump %1 times to %2" +msgstr "Гузаштан %1 бор ба %2" -#: callmapview.cpp:277 -msgid "Split Direction" -msgstr "" +#: sourceview.cpp:54 sourceview.cpp:554 +msgid "Source (unknown)" +msgstr "Сарчашма (номаълум)" -#: callmapview.cpp:279 -msgid "Skip Incorrect Borders" +#: sourceview.cpp:89 +msgid "" +"Annotated SourceThe annotated source list shows the source lines " +"of the current selected function together with (self) cost spent while " +"executing the code of this source line. If there was a call in a source " +"line, lines with details on the call happening are inserted into the source: " +"the cost spent inside of the call, the number of calls happening, and the " +"call destination.
Select a inserted call information line to make the " +"destination function current.
" msgstr "" -#: callmapview.cpp:284 -msgid "Border Width" -msgstr "Бари сарҳад" +#: sourceview.cpp:120 +#, c-format +msgid "Go to Line %1" +msgstr "Гузаштан ба хати %1" -#: callmapview.cpp:285 -msgid "Border 0" -msgstr "Сарҳади 0" +#: sourceview.cpp:293 +msgid "(No Source)" +msgstr "(Сарчашма нест)" -#: callmapview.cpp:288 -msgid "Border 1" -msgstr "Сарҳади 1" +#: sourceview.cpp:512 +msgid "There is no cost of current selected type associated" +msgstr "" -#: callmapview.cpp:290 -msgid "Border 2" -msgstr "Сарҳади 2" +#: sourceview.cpp:514 +msgid "with any source line of this function in file" +msgstr "" -#: callmapview.cpp:292 -msgid "Border 3" -msgstr "Сарҳади 3" +#: sourceview.cpp:518 +msgid "Thus, no annotated source can be shown." +msgstr "" -#: callmapview.cpp:297 -msgid "Draw Symbol Names" -msgstr "Кашидани номҳои рамз" +#: sourceview.cpp:553 +msgid "Source ('%1')" +msgstr "Сарчашма ('%1')" -#: callmapview.cpp:298 -msgid "Draw Cost" -msgstr "Кашидани нарх" +#: sourceview.cpp:559 +msgid "--- Inlined from '%1' ---" +msgstr "" -#: callmapview.cpp:299 -msgid "Draw Location" -msgstr "Кашидани ҷойгиршавӣ" +#: sourceview.cpp:560 +msgid "--- Inlined from unknown source ---" +msgstr "" -#: callmapview.cpp:300 -msgid "Draw Calls" -msgstr "Кашидани сигналҳо" +#: sourceview.cpp:565 +msgid "There is no source available for the following function:" +msgstr "" -#: callmapview.cpp:303 partselection.cpp:342 -msgid "Ignore Proportions" -msgstr "Аҳамият надодани таносуб" +#: sourceview.cpp:570 +msgid "This is because no debug information is present." +msgstr "" -#: callmapview.cpp:304 partselection.cpp:344 treemap.cpp:2887 -msgid "Allow Rotation" -msgstr "Иҷозат додани даврзанӣ" +#: sourceview.cpp:572 +msgid "Recompile source and redo the profile run." +msgstr "" -#: callmapview.cpp:321 treemap.cpp:2889 -msgid "Shading" -msgstr "Соякунӣ" +#: sourceview.cpp:575 +msgid "The function is located in this ELF object:" +msgstr "" -#: callmapview.cpp:431 -msgid "Call Map: Current is '%1'" -msgstr "Харитаи сигнал: '%1' ҷорӣ аст" +#: sourceview.cpp:583 +msgid "This is because its source file cannot be found:" +msgstr "" -#: callmapview.cpp:599 -msgid "(no function)" -msgstr "(функсия нест)" +#: sourceview.cpp:587 +msgid "Add the folder of this file to the source folder list." +msgstr "Илова кардани феҳристи ин файл ба рӯйхати феҳристи сарчашма." -#: callmapview.cpp:741 callmapview.cpp:858 -msgid "(no call)" -msgstr "(дархост нест)" +#: sourceview.cpp:589 +msgid "The list can be found in the configuration dialog." +msgstr "" -#: instritem.cpp:106 sourceitem.cpp:86 -msgid "Active call to '%1'" -msgstr "Сигнали фаъол ба '%1'" +#: tabview.cpp:64 +msgid "Move to Top" +msgstr "Кӯчондан ба боло" -#: instritem.cpp:108 sourceitem.cpp:88 -msgid "" -"_n: %n call to '%1'\n" -"%n calls to '%1'" -msgstr "" -"%n сигнал ба '%1'\n" -"%n сигнал ба '%1'" +#: tabview.cpp:65 tabview.cpp:91 +#, fuzzy +msgid "Top" +msgstr "Ба тарафи чапи боло" -#: sourceitem.cpp:125 -msgid "Jump %1 of %2 times to %3" -msgstr "Гузаштан %1 аз %2 бор ба %3" +#: tabview.cpp:68 +msgid "Move to Right" +msgstr "Кӯчондан ба тарафи рост" -#: sourceitem.cpp:130 -msgid "Jump %1 times to %2" -msgstr "Гузаштан %1 бор ба %2" +#: tabview.cpp:69 tabview.cpp:92 +#, fuzzy +msgid "Right" +msgstr "Ба тарафи рости боло" -#: instritem.cpp:185 sourceitem.cpp:169 -msgid "(cycle)" -msgstr "(давр)" +#: tabview.cpp:72 +msgid "Move to Bottom" +msgstr "Кӯчондан ба поён" -#: costtypeview.cpp:42 -msgid "Event Type" -msgstr "Навъи воқеъа" +#: tabview.cpp:73 tabview.cpp:93 +#, fuzzy +msgid "Bottom" +msgstr "Ба тарафи чапи поён" -#: costtypeview.cpp:45 -msgid "Short" -msgstr "Кӯтоҳ" +#: tabview.cpp:76 +msgid "Move to Bottom Left" +msgstr "Кӯчондан ба тарафи чапи поён" -#: costtypeview.cpp:47 -msgid "Formula" -msgstr "Формула" +#: tabview.cpp:77 tabview.cpp:94 treemap.cpp:2908 +msgid "Bottom Left" +msgstr "Тарафи чапи поён" -#: costtypeview.cpp:81 -msgid "" -"Cost Types List" -"This list shows all cost types available and what the self/inclusive cost of " -"the current selected function is for that cost type.
" -"By choosing a cost type from the list, you change the cost type of costs " -"shown all over KCachegrind to be the selected one.
" +#: tabview.cpp:79 +msgid "Move Area To" msgstr "" -#: costtypeview.cpp:98 -msgid "Set Secondary Event Type" -msgstr "Танзим кардани навъи воқеъаи миёна" +#: tabview.cpp:81 +msgid "Hide This Tab" +msgstr "Пинҳон кардани ин ҷадвалбандӣ" -#: costtypeview.cpp:100 -msgid "Remove Secondary Event Type" -msgstr "Дур кардани навъи воқеъаи миёна" +#: tabview.cpp:82 +msgid "Hide Area" +msgstr "Пинҳон кардани фазо" + +#: tabview.cpp:95 +msgid "Show Hidden On" +msgstr "" -#: costtypeview.cpp:105 -msgid "Edit Long Name" -msgstr "Таҳрир кардани номи дароз" +#: tabview.cpp:242 +msgid "(No profile data file loaded)" +msgstr "" -#: costtypeview.cpp:106 -msgid "Edit Short Name" -msgstr "Таҳрир кардани номи кӯтоҳ" +#: tabview.cpp:281 +msgid "Types" +msgstr "Навъҳо" -#: costtypeview.cpp:107 -msgid "Edit Formula" -msgstr "Таҳрир кардани формула" +#: tabview.cpp:284 +msgid "Callers" +msgstr "Фарохонанда" -#: costtypeview.cpp:115 -msgid "New Cost Type ..." -msgstr "Навъи нархи нав ..." +#: tabview.cpp:287 +msgid "All Callers" +msgstr "Ҳамаи фарохонандаҳо" -#: costtypeview.cpp:149 costtypeview.cpp:154 -#, c-format -msgid "New%1" -msgstr "%1-и нав" +#: tabview.cpp:290 +msgid "Caller Map" +msgstr "Нақша фарохонанда" -#: costtypeview.cpp:155 -#, c-format -msgid "New Cost Type %1" -msgstr "Навъи нархи нав %1" +#: tabview.cpp:293 +msgid "Source" +msgstr "Сарчашма" -#: callview.cpp:45 instrview.cpp:127 sourceview.cpp:52 -msgid "Cost 2" -msgstr "Нархи 2" +#: tabview.cpp:297 +msgid "Parts" +msgstr "Қисмҳо" -#: callview.cpp:47 callview.cpp:51 -msgid "Count" -msgstr "Ҳисоб кардан" +#: tabview.cpp:300 +msgid "Call Graph" +msgstr "Намоиши дархост" -#: callview.cpp:48 coverageview.cpp:50 -msgid "Caller" -msgstr "Дархосткунанда" +#: tabview.cpp:303 +msgid "Callees" +msgstr "" -#: callview.cpp:52 coverageview.cpp:56 -msgid "Callee" +#: tabview.cpp:306 +msgid "All Callees" msgstr "" -#: callview.cpp:85 -msgid "" -"List of direct Callers" -"This list shows all functions calling the current selected one directly, " -"together with a call count and the cost spent in the current selected function " -"while being called from the function from the list.
" -"An icon instead of an inclusive cost specifies that this is a call inside of " -"a recursive cycle. An inclusive cost makes no sense here.
" -"Selecting a function makes it the current selected one of this information " -"panel. If there are two panels (Split mode), the function of the other panel is " -"changed instead.
" +#: tabview.cpp:310 +msgid "Callee Map" msgstr "" -#: callview.cpp:98 +#: tabview.cpp:553 msgid "" -"List of direct Callees" -"This list shows all functions called by the current selected one directly, " -"together with a call count and the cost spent in this function while being " -"called from the selected function.
" -"Selecting a function makes it the current selected one of this information " -"panel. If there are two panels (Split mode), the function of the other panel is " -"changed instead.
" +"Information TabsThis widget shows information for the current " +"selected function in different tabs:
A trace consists of multiple trace parts when there are several profile data " -"files from one profile run. The Trace Part Overview dockable shows these, " -"horizontally ordered in execution time; the rectangle sizes are proportional to " -"the total cost spent in the parts. You can select one or several parts to " -"constrain all costs shown to these parts only.
" -"The parts are further subdivided: there is a partitioning and an callee " -"split mode: " -"
A trace consists of multiple trace parts when " +"there are several profile data files from one profile run. The Trace Part " +"Overview dockable shows these, horizontally ordered in execution time; the " +"rectangle sizes are proportional to the total cost spent in the parts. You " +"can select one or several parts to constrain all costs shown to these parts " +"only.
The parts are further subdivided: there is a partitioning and an " +"callee split mode:
This is a purely fictional 'most probable' call stack. It is built up by " -"starting with the current selected function and adds the callers/callees with " -"highest cost at the top and to bottom.
" -"The Cost and Calls columns show the cost used for all calls " -"from the function in the line above.
" +"The Top Cost Call StackThis is a purely fictional 'most probable' " +"call stack. It is built up by starting with the current selected function " +"and adds the callers/callees with highest cost at the top and to bottom." +"p>
The Cost and Calls columns show the cost used for all " +"calls from the function in the line above.
" msgstr "" #: toplevel.cpp:328 @@ -1374,42 +1392,38 @@ msgstr "Тахассуси хона" #: toplevel.cpp:338 msgid "" -"The Flat Profile" -"The flat profile contains a group and a function selection list. The group " -"list contains all groups where costs are spent in, depending on the chosen " -"group type. The group list is hidden when group type 'Function' is selected." -"
" -"
The function list contains the functions of the selected group (or all for " -"'Function' group type), ordered by the costs spent therein. Functions with " -"costs less than 1% are hidden on default.
" +"The Flat ProfileThe flat profile contains a group and a function " +"selection list. The group list contains all groups where costs are spent in, " +"depending on the chosen group type. The group list is hidden when group type " +"'Function' is selected.
The function list contains the functions of the " +"selected group (or all for 'Function' group type), ordered by the costs " +"spent therein. Functions with costs less than 1% are hidden on default.
" msgstr "" +#: dumpselectionbase.ui:16 toplevel.cpp:352 toplevel.cpp:604 +#, no-c-format +msgid "Profile Dumps" +msgstr "Нусхабардорҳои тахассус" + #: toplevel.cpp:362 msgid "" -"Profile Dumps" -"This dockable shows in the top part the list of loadable profile dumps in " -"all subdirectories of: " -"
On selecting a profile dump, information for it is shown in the bottom area " -"of the dockable: " -"
This dockable shows in the top part the list of " +"loadable profile dumps in all subdirectories of:
On selecting a profile dump, information for it is shown in the bottom " +"area of the dockable:
Make a copy of the current layout.
" +"Duplicate Current LayoutMake a copy of the current layout.
" +msgstr "" + +#: toplevel.cpp:458 +msgid "&Remove" msgstr "" #: toplevel.cpp:461 msgid "" -"Remove Current Layout" -"Delete current layout and make the previous active.
" +"Remove Current LayoutDelete current layout and make the previous " +"active.
" msgstr "" #: toplevel.cpp:465 @@ -1470,8 +1487,12 @@ msgstr "&Илова кардан..." #: toplevel.cpp:505 msgid "" -"Add Profile Data" -"This opens an additional profile data file in the current window.
" +"Add Profile DataThis opens an additional profile data file in the " +"current window.
" +msgstr "" + +#: toplevel.cpp:509 +msgid "&Reload" msgstr "" #: toplevel.cpp:517 @@ -1484,9 +1505,8 @@ msgstr "&Содир кардани нақша" #: toplevel.cpp:525 msgid "" -"Export Call Graph" -"Generates a file with extension .dot for the tools of the GraphViz " -"package.
" +"Export Call GraphGenerates a file with extension .dot for the " +"tools of the GraphViz package.
" msgstr "" #: toplevel.cpp:531 @@ -1495,27 +1515,26 @@ msgstr "&Нуфузи нусхабардорӣ" #: toplevel.cpp:540 msgid "" -"Force Dump" -"This forces a dump for a Callgrind profile run in the current directory. " -"This action is checked while KCachegrind looks for the dump. If the dump is " -"finished, it automatically reloads the current trace. If this is the one from " -"the running Callgrind, the new created trace part will be loaded, too.
" -"Force dump creates a file 'callgrind.cmd', and checks every second for its " -"existence. A running Callgrind will detect this file, dump a trace part, and " -"delete 'callgrind.cmd'. The deletion is detected by KCachegrind, and it does a " -"Reload. If there's no Callgrind running, press 'Force Dump' again to " -"cancel the dump request. This deletes 'callgrind.cmd' itself and stops polling " -"for a new dump.
" -"Note: A Callgrind run only detects existence of 'callgrind.cmd' " -"when actively running a few milliseconds, i.e. not " -"sleeping. Tip: For a profiled GUI program, you can awake Callgrind e.g. by " -"resizing a window of the program.
" +"Force DumpThis forces a dump for a Callgrind profile run in the " +"current directory. This action is checked while KCachegrind looks for the " +"dump. If the dump is finished, it automatically reloads the current trace. " +"If this is the one from the running Callgrind, the new created trace part " +"will be loaded, too.
Force dump creates a file 'callgrind.cmd', and " +"checks every second for its existence. A running Callgrind will detect this " +"file, dump a trace part, and delete 'callgrind.cmd'. The deletion is " +"detected by KCachegrind, and it does a Reload. If there's no " +"Callgrind running, press 'Force Dump' again to cancel the dump request. This " +"deletes 'callgrind.cmd' itself and stops polling for a new dump.
Note: " +"A Callgrind run only detects existence of 'callgrind.cmd' when " +"actively running a few milliseconds, i.e. not sleeping. Tip: For a " +"profiled GUI program, you can awake Callgrind e.g. by resizing a window of " +"the program.
" msgstr "" #: toplevel.cpp:565 msgid "" -"Open Profile Data" -"This opens a profile data file, with possible multiple parts
" +"Open Profile DataThis opens a profile data file, with possible " +"multiple parts
" msgstr "" #: toplevel.cpp:581 @@ -1530,6 +1549,11 @@ msgstr "Анбораи алоқа" msgid "Show/Hide the Call Stack Dockable" msgstr "Нишон додани/Пинҳон кардани кӯтоҳкунии анбораи алоқа" +#: functionselectionbase.ui:16 toplevel.cpp:594 +#, no-c-format +msgid "Function Profile" +msgstr "Тахассуси функсия" + #: toplevel.cpp:599 msgid "Show/Hide the Function Profile Dockable" msgstr "Нишон додани/Пинҳон кардани кӯтоҳкунии тахассуси функсия" @@ -1560,29 +1584,16 @@ msgstr "" #: toplevel.cpp:638 msgid "" -"Show percentage costs relative to parent" -"If this is switched off, percentage costs are always shown relative to the " -"total cost of the profile part(s) that are currently browsed. By turning on " -"this option, percentage cost of shown cost items will be relative to the parent " -"cost item." -"
Cost Type | " -"Parent Cost |
Function Cumulative | " -"Total |
Function Self | " -"Function Group (*) / Total |
Call | " -"Function Cumulative |
Source Line | " -"Function Cumulative |
(*) Only if function grouping is switched on (e.g. ELF object grouping)." +"Show percentage costs relative to parent
If this is switched off, " +"percentage costs are always shown relative to the total cost of the profile " +"part(s) that are currently browsed. By turning on this option, percentage " +"cost of shown cost items will be relative to the parent cost item." +"
Cost Type | Parent Cost | " +"tr>
Function Cumulative | Total |
Function Self" +"td> | Function Group (*) / Total |
Call | Function " +"Cumulative |
Source Line | Function Cumulative | " +"tr>
(*) Only if function grouping is switched on (e.g. ELF object " +"grouping)." msgstr "" #: toplevel.cpp:653 @@ -1595,17 +1606,16 @@ msgstr "Рад кардани бозёбии давр" #: toplevel.cpp:662 msgid "" -"Detect recursive cycles" -"
If this is switched off, the treemap drawing will show black areas when a " -"recursive call is made instead of drawing the recursion ad infinitum. Note that " -"the size of black areas often will be wrong, as inside recursive cycles the " -"cost of calls cannot be determined; the error is small, however, for false " -"cycles (see documentation)." -"
The correct handling for cycles is to detect them and collapse all functions " -"of a cycle into a virtual function, which is done when this option is selected. " -"Unfortunately, with GUI applications, this often will lead to huge false " -"cycles, making the analysis impossible; therefore, there is the option to " -"switch this off." +"Detect recursive cycles
If this is switched off, the treemap " +"drawing will show black areas when a recursive call is made instead of " +"drawing the recursion ad infinitum. Note that the size of black areas often " +"will be wrong, as inside recursive cycles the cost of calls cannot be " +"determined; the error is small, however, for false cycles (see " +"documentation).
The correct handling for cycles is to detect them and " +"collapse all functions of a cycle into a virtual function, which is done " +"when this option is selected. Unfortunately, with GUI applications, this " +"often will lead to huge false cycles, making the analysis impossible; " +"therefore, there is the option to switch this off." msgstr "" #: toplevel.cpp:684 toplevel.cpp:724 @@ -1618,9 +1628,8 @@ msgstr "" #: toplevel.cpp:696 toplevel.cpp:710 msgid "" -"Go Up" -"
Go to last selected caller of current function. If no caller was visited, " -"use that with highest cost.
" +"Go UpGo to last selected caller of current function. If no caller " +"was visited, use that with highest cost.
" msgstr "" #: toplevel.cpp:702 @@ -1643,18 +1652,10 @@ msgstr "Навъи воқеъаи миёна" msgid "Select secondary event type for cost e.g. shown in annotations" msgstr "" -#: functionselection.cpp:243 toplevel.cpp:763 -msgid "Grouping" -msgstr "Ба гурӯҳҳо ҷудокунӣ" - #: toplevel.cpp:766 msgid "Select how functions are grouped into higher level cost items" msgstr "" -#: functionselection.cpp:52 toplevel.cpp:772 -msgid "(No Grouping)" -msgstr "(Ба гурӯҳҳо ҷудокунӣ нашуд)" - #: toplevel.cpp:782 msgid "Split" msgstr "Ҷудо кардан" @@ -1710,905 +1711,850 @@ msgstr "Нишон додани нархи мутлақ" msgid "Show Relative Cost" msgstr "" -#: partselection.cpp:302 toplevel.cpp:1687 -msgid "Go Back" -msgstr "Гузаштан ба қафо" - -#: toplevel.cpp:1688 -msgid "Go Forward" -msgstr "Ба пеш гузаштан" - -#: toplevel.cpp:1689 -msgid "Go Up" -msgstr "Ба боло гузаштан" - -#: toplevel.cpp:1921 -#, c-format -msgid "Layout Count: %1" -msgstr "Ҳисоби схема: %1" - -#: toplevel.cpp:1928 -msgid "No profile data file loaded." -msgstr "" - -#: toplevel.cpp:1937 -msgid "Total %1 Cost: %2" -msgstr "Ҳамагӣ %1 нарх: %2" - -#: toplevel.cpp:1949 -msgid "No event type selected" -msgstr "Навъи воқеъа интихоб карда нашуд" - -#: toplevel.cpp:2194 toplevel.cpp:2230 toplevel.cpp:2266 -msgid "(No Stack)" -msgstr "(Анбора нест)" - -#: toplevel.cpp:2200 -msgid "(No next function)" -msgstr "(Функсияи оянда нест)" - -#: toplevel.cpp:2236 -msgid "(No previous function)" -msgstr "(Функсияи қаблӣ нест)" - -#: toplevel.cpp:2271 -msgid "(No Function Up)" -msgstr "(Функсияи болои нест)" - -#: costtypeitem.cpp:56 -msgid "Unknown Type" -msgstr "Навъи номаълум" - -#: functionselection.cpp:176 -#, c-format -msgid "Go to %1" -msgstr "Ба %1 гузаштан" - -#: functionselection.cpp:203 -msgid "Show All Items" -msgstr "Нишон додани ҳамаи чизҳо" - -#: functionselection.cpp:226 -msgid "No Grouping" -msgstr "" - -#: sourceview.cpp:54 sourceview.cpp:554 -msgid "Source (unknown)" -msgstr "Сарчашма (номаълум)" - -#: sourceview.cpp:89 -msgid "" -"Annotated Source" -"The annotated source list shows the source lines of the current selected " -"function together with (self) cost spent while executing the code of this " -"source line. If there was a call in a source line, lines with details on the " -"call happening are inserted into the source: the cost spent inside of the call, " -"the number of calls happening, and the call destination.
" -"Select a inserted call information line to make the destination function " -"current.
" -msgstr "" - -#: sourceview.cpp:120 -#, c-format -msgid "Go to Line %1" -msgstr "Гузаштан ба хати %1" - -#: sourceview.cpp:293 -msgid "(No Source)" -msgstr "(Сарчашма нест)" - -#: sourceview.cpp:512 -msgid "There is no cost of current selected type associated" -msgstr "" - -#: sourceview.cpp:514 -msgid "with any source line of this function in file" -msgstr "" - -#: sourceview.cpp:518 -msgid "Thus, no annotated source can be shown." -msgstr "" - -#: sourceview.cpp:553 -msgid "Source ('%1')" -msgstr "Сарчашма ('%1')" - -#: sourceview.cpp:559 -msgid "--- Inlined from '%1' ---" -msgstr "" - -#: sourceview.cpp:560 -msgid "--- Inlined from unknown source ---" -msgstr "" - -#: sourceview.cpp:565 -msgid "There is no source available for the following function:" -msgstr "" - -#: sourceview.cpp:570 -msgid "This is because no debug information is present." -msgstr "" - -#: sourceview.cpp:572 -msgid "Recompile source and redo the profile run." -msgstr "" - -#: sourceview.cpp:575 -msgid "The function is located in this ELF object:" -msgstr "" - -#: sourceview.cpp:583 -msgid "This is because its source file cannot be found:" -msgstr "" - -#: sourceview.cpp:587 -msgid "Add the folder of this file to the source folder list." -msgstr "Илова кардани феҳристи ин файл ба рӯйхати феҳристи сарчашма." - -#: sourceview.cpp:589 -msgid "The list can be found in the configuration dialog." -msgstr "" - -#: configuration.cpp:67 -msgid "Instruction Fetch" -msgstr "" - -#: configuration.cpp:68 -msgid "Data Read Access" -msgstr "Истеъдоди ҳуқуқро хонед" - -#: configuration.cpp:69 -msgid "Data Write Access" -msgstr "Истеъдоди ҳуқуқро нависед" - -#: configuration.cpp:70 -msgid "L1 Instr. Fetch Miss" -msgstr "" - -#: configuration.cpp:71 -msgid "L1 Data Read Miss" -msgstr "L1 Истеъдоди гузаронданро хонед" +#: toplevel.cpp:1688 +msgid "Go Forward" +msgstr "Ба пеш гузаштан" -#: configuration.cpp:72 -msgid "L1 Data Write Miss" -msgstr "L1 Истеъдоди гузаронданро нависед" +#: toplevel.cpp:1689 +msgid "Go Up" +msgstr "Ба боло гузаштан" -#: configuration.cpp:73 -msgid "L2 Instr. Fetch Miss" +#: toplevel.cpp:1921 +#, c-format +msgid "Layout Count: %1" +msgstr "Ҳисоби схема: %1" + +#: toplevel.cpp:1928 +msgid "No profile data file loaded." msgstr "" -#: configuration.cpp:74 -msgid "L2 Data Read Miss" -msgstr " L2 Истеъдоди гузаронданро хонед" +#: toplevel.cpp:1937 +msgid "Total %1 Cost: %2" +msgstr "Ҳамагӣ %1 нарх: %2" -#: configuration.cpp:75 -msgid "L2 Data Write Miss" -msgstr "L2 Истеъдоди гузаронданро нависед" +#: toplevel.cpp:1949 +msgid "No event type selected" +msgstr "Навъи воқеъа интихоб карда нашуд" -#: configuration.cpp:76 -msgid "LL Instr. Fetch Miss" -msgstr "" +#: toplevel.cpp:2194 toplevel.cpp:2230 toplevel.cpp:2266 +msgid "(No Stack)" +msgstr "(Анбора нест)" -#: configuration.cpp:77 -#, fuzzy -msgid "LL Data Read Miss" -msgstr "L1 Истеъдоди гузаронданро хонед" +#: toplevel.cpp:2200 +msgid "(No next function)" +msgstr "(Функсияи оянда нест)" -#: configuration.cpp:78 -#, fuzzy -msgid "LL Data Write Miss" -msgstr "L1 Истеъдоди гузаронданро нависед" +#: toplevel.cpp:2236 +msgid "(No previous function)" +msgstr "(Функсияи қаблӣ нест)" -#: configuration.cpp:79 -msgid "Samples" -msgstr "Намунаҳо" +#: toplevel.cpp:2271 +msgid "(No Function Up)" +msgstr "(Функсияи болои нест)" -#: configuration.cpp:80 -msgid "System Time" -msgstr "Вақти система" +#: tracedata.cpp:153 +msgid "Abstract Item" +msgstr "Таҷрид кардани чиз" -#: configuration.cpp:81 -msgid "User Time" -msgstr "Вақти истифодабаранда" +#: tracedata.cpp:154 +msgid "Cost Item" +msgstr "Ҳисоб кардани чиз" -#: configuration.cpp:82 -msgid "L1 Miss Sum" -msgstr "L1 Ҳосили ҷамъи гузаронда" +#: tracedata.cpp:155 +msgid "Part Source Line" +msgstr "Хати қисми сарчашма" -#: configuration.cpp:83 -msgid "L2 Miss Sum" -msgstr " L2 Ҳосили ҷамъи гузаронда" +#: tracedata.cpp:156 +msgid "Source Line" +msgstr "Хати сарчашма" -#: configuration.cpp:84 -#, fuzzy -msgid "LL Miss Sum" -msgstr "L1 Ҳосили ҷамъи гузаронда" +#: tracedata.cpp:157 +msgid "Part Line Call" +msgstr "Сигнали қисми хат" -#: configuration.cpp:85 -msgid "Cycle Estimation" -msgstr "Ҷамъбасти давр" +#: tracedata.cpp:158 +msgid "Line Call" +msgstr "Сигнали хат" -#: configdlg.cpp:60 -msgid "Source Files" -msgstr "Файлҳои сарчашма" +#: tracedata.cpp:159 +msgid "Part Jump" +msgstr "Паридани қисм" -#: configdlg.cpp:61 -msgid "C++ Classes" -msgstr "Синфҳои C++" +#: tracedata.cpp:160 +msgid "Jump" +msgstr "Паридан" -#: configdlg.cpp:62 -msgid "Function (no Grouping)" -msgstr "Функсия (Ба гурӯҳҳо ҷудокунӣ нест)" +#: tracedata.cpp:161 +msgid "Part Instruction" +msgstr "Дастури қисм" -#: configdlg.cpp:157 configdlg.cpp:350 configdlg.cpp:371 -msgid "(always)" -msgstr "(ҳамавақт)" +#: tracedata.cpp:162 +msgid "Instruction" +msgstr "Дастур" -#: configdlg.cpp:210 -msgid "KCachegrind Configuration" -msgstr "Танзимоти KCachegrind" +#: tracedata.cpp:163 +msgid "Part Instruction Jump" +msgstr "Паридани дастури қисм" -#: configdlg.cpp:211 -msgid "" -"The Maximum Number of List Items should be below 500.The previous set value " -"(%1) will still be used." -msgstr "" +#: tracedata.cpp:164 +msgid "Instruction Jump" +msgstr "Паридани дастур" -#: configdlg.cpp:384 -msgid "Choose Source Folder" -msgstr "Феҳристи сарчашмаро интихоб кунед" +#: tracedata.cpp:165 +msgid "Part Instruction Call" +msgstr "Алоқаи дастури қисм" -#: partview.cpp:51 -msgid "Comment" -msgstr "Тавзеҳ" +#: tracedata.cpp:166 +msgid "Instruction Call" +msgstr "Алоқаи дастур" -#: partview.cpp:73 -msgid "" -"Trace Part List" -"This list shows all trace parts of the loaded trace. For each part, the " -"self/inclusive cost of the current selected function, spent in the part, is " -"shown; percentage costs are always relative to the total cost " -"of the part (not to the whole trace as in the Trace Part Overview). Also " -"shown are the calls happening to/from the current function inside of the trace " -"part.
" -"By choosing one or more trace parts from the list, the costs shown all over " -"KCachegrind will only be the ones spent in the selected part(s). If no list " -"selection is shown, in fact all trace parts are selected implicitly.
" -"This is a multi-selection list. You can select ranges by dragging the mouse " -"or use SHIFT/CTRL modifiers. Selection/Deselection of trace parts can also be " -"done by using the Trace Part Overview Dockable. This one also supports multiple " -"selection.
" -"Note that the list is hidden if only one trace part is loaded.
" -msgstr "" +#: tracedata.cpp:167 +msgid "Part Call" +msgstr "Қисми сигнал" -#: partview.cpp:106 -msgid "Select '%1'" -msgstr "Интихоб кардани '%1'" +#: tracedata.cpp:168 +msgid "Call" +msgstr "Сигнал" -#: partview.cpp:107 -msgid "Hide '%1'" -msgstr "Пинҳон кардани '%1'" +#: tracedata.cpp:169 +msgid "Part Function" +msgstr "Функсияи қисм" -#: partview.cpp:111 -msgid "Hide Selected" -msgstr "Пинҳон кардани интихобшуда" +#: tracedata.cpp:170 +msgid "Function Source File" +msgstr "Файли сарчашмаи функсия" -#: partview.cpp:112 -msgid "Show All" -msgstr "Нишон додани ҳама" +#: dumpselectionbase.ui:300 dumpselectionbase.ui:939 +#: functionselectionbase.ui:136 stackselectionbase.ui:64 tracedata.cpp:171 +#, no-c-format +msgid "Function" +msgstr "Функсия" -#: callgraphview.cpp:306 -#, c-format -msgid "Call(s) from %1" -msgstr "Сигнал(ҳо) аз %1" +#: tracedata.cpp:172 +msgid "Function Cycle" +msgstr "Даври функция" -#: callgraphview.cpp:307 -#, c-format -msgid "Call(s) to %1" -msgstr "Сигнал(ҳо) ба %1" +#: tracedata.cpp:173 +msgid "Part Class" +msgstr "Қисми синф" -#: callgraphview.cpp:308 -msgid "(unknown call)" -msgstr "(дархости номаълум)" +#: tracedata.cpp:174 +msgid "Class" +msgstr "Синф" -#: callgraphview.cpp:1425 -msgid "" -"Call Graph around active Function" -"Depending on configuration, this view shows the call graph environment of " -"the active function. Note: the shown cost is only " -"the cost which is spent while the active function was actually running; i.e. " -"the cost shown for main() - if it's visible - should be the same as the cost of " -"the active function, as that's the part of inclusive cost of main() spent while " -"the active function was running.
" -"For cycles, blue call arrows indicate that this is an artificial call added " -"for correct drawing which actually never happened.
" -"If the graph is larger than the widget area, an overview panner is shown in " -"one edge. There are similar visualization options to the Call Treemap; the " -"selected function is highlighted." -"
" -msgstr "" +#: tracedata.cpp:175 +msgid "Part Source File" +msgstr "Файли қисми сарчашма" -#: callgraphview.cpp:1789 -msgid "" -"Warning: a long lasting graph layouting is in progress.\n" -"Reduce node/edge limits for speedup.\n" -msgstr "" +#: tracedata.cpp:176 +msgid "Source File" +msgstr "Файли сарчашма" -#: callgraphview.cpp:1792 -msgid "" -"Layouting stopped.\n" -msgstr "" +#: tracedata.cpp:177 +msgid "Part ELF Object" +msgstr "Объекти қисми ELF" -#: callgraphview.cpp:1794 -msgid "" -"The call graph has %1 nodes and %2 edges.\n" -msgstr "" +#: tracedata.cpp:178 +msgid "ELF Object" +msgstr "Объекти ELF" -#: callgraphview.cpp:1827 -msgid "No item activated for which to draw the call graph." -msgstr "" +#: tracedata.cpp:180 +msgid "Program Trace" +msgstr "Пайи барнома" -#: callgraphview.cpp:1838 -msgid "No call graph can be drawn for the active item." -msgstr "" +#: tracedata.cpp:241 +msgid "%1 from %2" +msgstr "%1 аз %2" -#: callgraphview.cpp:1867 -msgid "" -"No call graph is available because the following\n" -"command cannot be run:\n" -"'%1'\n" -msgstr "" +#: tracedata.cpp:2583 +msgid "(no caller)" +msgstr "(оператор нест)" -#: callgraphview.cpp:1870 callgraphview.cpp:2199 -msgid "Please check that 'dot' is installed (package GraphViz)." +#: tracedata.cpp:2590 tracedata.cpp:2609 +msgid "%1 via %2" +msgstr "%1 аз %2" + +#: tracedata.cpp:2599 +msgid "(no callee)" msgstr "" -#: callgraphview.cpp:2198 -msgid "" -"Error running the graph layouting tool.\n" +#: tracedata.cpp:4467 +msgid "(not found)" +msgstr "(ёфт нашуд)" + +#: tracedata.cpp:5017 +msgid "Recalculating Function Cycles..." msgstr "" -#: callgraphview.cpp:2206 -msgid "" -"There is no call graph available for function\n" -"\t'%1'\n" -"because it has no cost of the selected event type." +#: traceitemview.cpp:53 +msgid "No description available" msgstr "" -#: callgraphview.cpp:2427 -#, fuzzy -msgid "Stop Layouting" -msgstr "Истодан дар функсия" +#: treemap.cpp:1281 +#, c-format +msgid "Text %1" +msgstr "Матни %1" -#: callgraphview.cpp:2435 -msgid "As PostScript" +#: treemap.cpp:2809 +msgid "Recursive Bisection" msgstr "" -#: callgraphview.cpp:2436 -msgid "As Image ..." -msgstr "Ҳамчун тасвир ..." +#: treemap.cpp:2810 +msgid "Columns" +msgstr "Сутунҳо" -#: callgraphview.cpp:2438 -msgid "Export Graph" -msgstr "Содир кардани нақша" +#: treemap.cpp:2811 +msgid "Rows" +msgstr "Қаторҳо" -#: callgraphview.cpp:2443 callgraphview.cpp:2466 -msgid "Unlimited" -msgstr "" +#: treemap.cpp:2812 +msgid "Always Best" +msgstr "Ҳамавақт беҳтарин" -#: callgraphview.cpp:2446 callgraphview.cpp:2469 -msgid "None" -msgstr "Ҳеҷ" +#: treemap.cpp:2813 +msgid "Best" +msgstr "Беҳтарин" -#: callgraphview.cpp:2447 callgraphview.cpp:2470 -msgid "max. 2" -msgstr "максималӣ 2" +#: treemap.cpp:2814 +msgid "Alternate (V)" +msgstr "Тағйирёбанда (V)" -#: callgraphview.cpp:2448 callgraphview.cpp:2471 -msgid "max. 5" -msgstr "максималӣ 5" +#: treemap.cpp:2815 +msgid "Alternate (H)" +msgstr "Тағйирёбанда (H)" -#: callgraphview.cpp:2449 callgraphview.cpp:2472 -msgid "max. 10" -msgstr "максималӣ 10" +#: treemap.cpp:2816 +#, fuzzy +msgid "Horizontal" +msgstr "Ҷудо кардани хати уфуқӣ" -#: callgraphview.cpp:2450 callgraphview.cpp:2473 -msgid "max. 15" -msgstr "максималӣ 15" +#: treemap.cpp:2817 +msgid "Vertical" +msgstr "" -#: callgraphview.cpp:2460 callgraphview.cpp:2483 -#, c-format -msgid "< %1" -msgstr "< %1" +#: treemap.cpp:2872 +msgid "Nesting" +msgstr "Ташаккулёбии лона" -#: callgraphview.cpp:2489 -msgid "No Minimum" -msgstr "Минемалӣ нест" +#: treemap.cpp:2874 +#, fuzzy +msgid "Border" +msgstr "Сарҳади 0" -#: callgraphview.cpp:2493 -#, c-format -msgid "50 %" -msgstr "50 %" +#: treemap.cpp:2875 +msgid "Correct Borders Only" +msgstr "" -#: callgraphview.cpp:2494 +#: treemap.cpp:2877 treemap.cpp:2878 treemap.cpp:2879 treemap.cpp:2880 #, c-format -msgid "20 %" -msgstr "20 %" +msgid "Width %1" +msgstr "Бар %1" -#: callgraphview.cpp:2495 -#, c-format -msgid "10 %" -msgstr "10 %" +#: treemap.cpp:2902 +msgid "Visible" +msgstr "" -#: callgraphview.cpp:2496 -#, c-format -msgid "5 %" -msgstr "5 %" +#: treemap.cpp:2903 +msgid "Take Space From Children" +msgstr "Гирифтани кайҳон аз кӯдакон" -#: callgraphview.cpp:2497 -#, c-format -msgid "3 %" -msgstr "3 %" +#: treemap.cpp:2905 +msgid "Top Left" +msgstr "Тарафи чапи боло" -#: callgraphview.cpp:2498 -#, c-format -msgid "2 %" -msgstr "2 %" +#: treemap.cpp:2906 +msgid "Top Center" +msgstr "Маркази боло" -#: callgraphview.cpp:2499 -#, c-format -msgid "1.5 %" -msgstr "1.5 %" +#: treemap.cpp:2907 +msgid "Top Right" +msgstr "Тарафи рости боло" -#: callgraphview.cpp:2500 -#, c-format -msgid "1 %" -msgstr "1 %" +#: treemap.cpp:2909 +msgid "Bottom Center" +msgstr "Маркази поён" -#: callgraphview.cpp:2516 -msgid "Same as Node" -msgstr "Ҳамон барин гиреҳ " +#: treemap.cpp:2910 +msgid "Bottom Right" +msgstr "Тарафи рости поён" -#: callgraphview.cpp:2517 -#, c-format -msgid "50 % of Node" -msgstr "50 %ба гиреҳ" +#: treemap.cpp:2987 +msgid "No %1 Limit" +msgstr "Ҳудуди %1 нест" -#: callgraphview.cpp:2518 +#: treemap.cpp:3056 treemap.cpp:3067 #, c-format -msgid "20 % of Node" -msgstr "20 % ба гиреҳ" +msgid "" +"_n: 1 Pixel\n" +"%n Pixels" +msgstr "" +"%n пиксел\n" +"%n пикселҳо" -#: callgraphview.cpp:2519 +#: treemap.cpp:3073 +msgid "Halve Area Limit (to %1)" +msgstr "Ду тақсим кардани ҳудуди фазо (то %1)" + +#: treemap.cpp:3118 #, c-format -msgid "10 % of Node" -msgstr "10 % ба гиреҳ" +msgid "Depth %1" +msgstr "Чуқурӣ %1" -#: callgraphview.cpp:2529 -msgid "Caller Depth" +#: treemap.cpp:3122 +msgid "Decrement (to %1)" msgstr "" -#: callgraphview.cpp:2530 -msgid "Callee Depth" +#: treemap.cpp:3124 +msgid "Increment (to %1)" msgstr "" -#: callgraphview.cpp:2531 -msgid "Min. Node Cost" -msgstr "" +#: configdlgbase.ui:16 +#, fuzzy, no-c-format +msgid "Configuration" +msgstr "Танзимоти KCachegrind" -#: callgraphview.cpp:2532 -msgid "Min. Call Cost" -msgstr "" +#: configdlgbase.ui:37 +#, no-c-format +msgid "General" +msgstr "Умумӣ" -#: callgraphview.cpp:2534 -msgid "Arrows for Skipped Calls" +#: configdlgbase.ui:69 +#, no-c-format +msgid "Truncated when more/longer than:" msgstr "" -#: callgraphview.cpp:2536 -msgid "Inner-cycle Calls" +#: configdlgbase.ui:77 +#, no-c-format +msgid "Precision of percentage values:" msgstr "" -#: callgraphview.cpp:2538 -msgid "Cluster Groups" +#: configdlgbase.ui:85 +#, no-c-format +msgid "Symbols in tooltips and context menus" msgstr "" -#: callgraphview.cpp:2543 -msgid "Compact" -msgstr "Зичӣ" +#: configdlgbase.ui:141 +#, no-c-format +msgid "Maximum number of items in lists:" +msgstr "Рақами ниҳоят калони чизҳо дар рӯйхатҳо:" -#: callgraphview.cpp:2544 -msgid "Normal" -msgstr "Оддӣ" +#: configdlgbase.ui:162 +#, fuzzy, no-c-format +msgid "Cost Item Colors" +msgstr "Ҳисоб кардани чиз" -#: callgraphview.cpp:2545 -msgid "Tall" -msgstr "Баланд" +#: configdlgbase.ui:254 +#, no-c-format +msgid "Object:" +msgstr "Объект:" -#: callgraphview.cpp:2550 -msgid "Top to Down" -msgstr "Аз боло ба поён" +#: configdlgbase.ui:262 +#, no-c-format +msgid "Class:" +msgstr "Синф:" -#: callgraphview.cpp:2551 -msgid "Left to Right" -msgstr "Аз тарафи чап ба рост" +#: configdlgbase.ui:310 +#, no-c-format +msgid "File:" +msgstr "Файл:" -#: callgraphview.cpp:2552 -msgid "Circular" -msgstr "Доирашакл" +#: configdlgbase.ui:376 +#, fuzzy, no-c-format +msgid "Annotations" +msgstr "Иҷозат додани даврзанӣ" -#: callgraphview.cpp:2558 -msgid "TopLeft" -msgstr "Ба тарафи чапи боло" +#: configdlgbase.ui:395 +#, no-c-format +msgid "Context lines in annotations:" +msgstr "" -#: callgraphview.cpp:2559 -msgid "TopRight" -msgstr "Ба тарафи рости боло" +#: configdlgbase.ui:423 +#, no-c-format +msgid "Source Folders" +msgstr "Феҳристҳои сарчашма" -#: callgraphview.cpp:2560 -msgid "BottomLeft" -msgstr "Ба тарафи чапи поён" +#: configdlgbase.ui:454 +#, no-c-format +msgid "Object / Related Source Base" +msgstr "" -#: callgraphview.cpp:2561 -msgid "BottomRight" -msgstr "Ба тарафи рости поён" +#: configdlgbase.ui:483 +#, no-c-format +msgid "Add..." +msgstr "Илова кардан..." -#: callgraphview.cpp:2569 -msgid "Graph" -msgstr "Нақша" +#: configdlgbase.ui:508 +#, no-c-format +msgid "Delete" +msgstr "" -#: callgraphview.cpp:2570 partselection.cpp:320 -msgid "Visualization" -msgstr "Таҷассумкорӣ" +#: configdlgbase.ui:585 +#, no-c-format +msgid "&OK" +msgstr "" -#: callgraphview.cpp:2571 -msgid "Birds-eye View" +#: configdlgbase.ui:596 +#, no-c-format +msgid "&Cancel" msgstr "" -#: partlistitem.cpp:49 -msgid " (Thread %1)" -msgstr " (Ришта %1)" +#: dumpselectionbase.ui:32 +#, no-c-format +msgid "Target" +msgstr "Мақсад" -#: partlistitem.cpp:56 -msgid "(none)" -msgstr "(ҳеҷ)" +#: dumpselectionbase.ui:54 +#, no-c-format +msgid "Time" +msgstr "Вақт" -#: callitem.cpp:82 partlistitem.cpp:152 -msgid "(active)" -msgstr "(фаъол)" +#: dumpselectionbase.ui:65 +#, no-c-format +msgid "Path" +msgstr "Роҳча" -#: partselection.cpp:151 -msgid "Profile Part Overview: Current is '%1'" -msgstr "Аз назаргузаронии қисми тахассус: '%1' ҷорӣ аст" +#: dumpselectionbase.ui:87 +#, fuzzy, no-c-format +msgid "Options" +msgstr "Параметр" -#: partselection.cpp:287 -msgid "Deselect" -msgstr "" +#: dumpselectionbase.ui:106 +#, no-c-format +msgid "Target command:" +msgstr "Фармони мақсад:" -#: partselection.cpp:287 partselection.cpp:311 -msgid "Select" -msgstr "Интихоб кардан" +#: dumpselectionbase.ui:119 +#, no-c-format +msgid "Profiler options:" +msgstr "Интихобҳои тахассус:" -#: partselection.cpp:292 -msgid "Select All Parts" -msgstr "Интихоб кардани ҳамаи қисмҳо" +#: dumpselectionbase.ui:125 +#, no-c-format +msgid "Option" +msgstr "Параметр" -#: partselection.cpp:294 -msgid "Visible Parts" -msgstr "Қисмҳои намоён" +#: dumpselectionbase.ui:136 dumpselectionbase.ui:688 +#, no-c-format +msgid "Value" +msgstr "Қимат" -#: partselection.cpp:296 -msgid "Hide Selected Parts" -msgstr "Пинҳон кардани қисмҳои интихобшуда" +#: dumpselectionbase.ui:147 +#, no-c-format +msgid "Trace" +msgstr "Пай" -#: partselection.cpp:297 -msgid "Unhide Hidden Parts" -msgstr "Кушодани қисмҳои пинҳоншуда" +#: dumpselectionbase.ui:160 dumpselectionbase.ui:768 +#, no-c-format +msgid "Jumps" +msgstr "Париданҳо" -#: partselection.cpp:322 -msgid "Partitioning Mode" -msgstr "Ҳолати бахшбандӣ" +#: dumpselectionbase.ui:174 +#, no-c-format +msgid "Instructions" +msgstr "Дастурҳо" -#: partselection.cpp:323 -msgid "Diagram Mode" -msgstr "" +#: dumpselectionbase.ui:189 dumpselectionbase.ui:783 +#, no-c-format +msgid "Events" +msgstr "Воқеъа" -#: partselection.cpp:324 -msgid "Zoom Function" -msgstr "Функсияи тағйири андозаи тасвир" +#: dumpselectionbase.ui:202 +#, no-c-format +msgid "Full Cache" +msgstr "Захираи махфӣ пур" -#: partselection.cpp:325 -msgid "Show Direct Calls" -msgstr "Дархостҳои аниқро нишон диҳед" +#: dumpselectionbase.ui:216 +#, no-c-format +msgid "Custom" +msgstr "Оддӣ" -#: partselection.cpp:326 -msgid "Increment Shown Call Levels" +#: dumpselectionbase.ui:231 +#, no-c-format +msgid "Collect" +msgstr "Ҷамъ кардан" + +#: dumpselectionbase.ui:244 +#, no-c-format +msgid "At Startup" msgstr "" -#: partselection.cpp:340 -msgid "Draw Names" -msgstr "Кашидани номҳо" +#: dumpselectionbase.ui:258 +#, no-c-format +msgid "While In" +msgstr "" -#: partselection.cpp:341 -msgid "Draw Costs" -msgstr "Кашидани нархҳо" +#: dumpselectionbase.ui:273 +#, no-c-format +msgid "Skip" +msgstr "Рад кардан" -#: partselection.cpp:343 -#, fuzzy -msgid "Draw Frames" -msgstr "Кашидани номҳо" +#: dumpselectionbase.ui:286 +#, no-c-format +msgid "PLT" +msgstr "PLT" -#: partselection.cpp:359 -msgid "Hide Info" -msgstr "Пинҳон кардани маълумот" +#: dumpselectionbase.ui:315 +#, no-c-format +msgid "Dump Profile" +msgstr "Тахассуси нусхабардорӣ" -#: partselection.cpp:361 -msgid "Show Info" -msgstr "Нишон додани маълумот" +#: dumpselectionbase.ui:328 +#, no-c-format +msgid "Every BBs" +msgstr "Ҳамаи BB-ҳо" -#: partselection.cpp:541 -msgid "(no trace loaded)" -msgstr "(пай пурбор нашуд)" +#: dumpselectionbase.ui:342 dumpselectionbase.ui:384 +#, no-c-format +msgid "On Entering" +msgstr "" -#: instrview.cpp:129 -msgid "Hex" -msgstr "Hex" +#: dumpselectionbase.ui:356 +#, no-c-format +msgid "On Leaving" +msgstr "" -#: instrview.cpp:132 -msgid "Source Position" -msgstr "Вазъияти сарчашма" +#: dumpselectionbase.ui:371 +#, no-c-format +msgid "Zero Events" +msgstr "Нолто воқеа" -#: instrview.cpp:163 -msgid "" -"Annotated Assembler" -"
The annotated assembler list shows the machine code instructions of the " -"current selected function together with (self) cost spent while executing an " -"instruction. If this is a call instruction, lines with details on the call " -"happening are inserted into the source: the cost spent inside of the call, the " -"number of calls happening, and the call destination.
" -"The disassembler output shown is generated with the 'objdump' utility from " -"the 'binutils' package.
" -"Select a line with call information to make the destination function of this " -"call current.
" -msgstr "" +#: dumpselectionbase.ui:399 +#, no-c-format +msgid "Separate" +msgstr "Ҷудо кардан" -#: instrview.cpp:195 -#, c-format -msgid "Go to Address %1" -msgstr "Ба суроғаи %1 гузаштан" +#: dumpselectionbase.ui:412 +#, no-c-format +msgid "Threads" +msgstr "Бандҳо" -#: instrview.cpp:207 -msgid "Hex Code" -msgstr "Коди Hex" +#: dumpselectionbase.ui:426 +#, no-c-format +msgid "Recursions" +msgstr "Бозгаштҳо" -#: instrview.cpp:426 -msgid "There is no instruction info in the profile data file." -msgstr "" +#: dumpselectionbase.ui:440 +#, no-c-format +msgid "Call Chain" +msgstr "Паёпаӣ дархост" -#: instrview.cpp:428 -msgid "For the Valgrind Calltree Skin, rerun with option" +#: dumpselectionbase.ui:470 +#, no-c-format +msgid "Custom profiler options:" msgstr "" -#: instrview.cpp:429 -msgid " --dump-instr=yes" +#: dumpselectionbase.ui:508 +#, no-c-format +msgid "Run New Profile" msgstr "" -#: instrview.cpp:430 -msgid "To see (conditional) jumps, additionally specify" -msgstr "" +#: dumpselectionbase.ui:520 +#, no-c-format +msgid "Info" +msgstr "Маълумот" -#: instrview.cpp:431 -msgid " --trace-jump=yes" -msgstr " --пай-гузаштан=ҳа" +#: dumpselectionbase.ui:531 +#, no-c-format +msgid "Dump reason:" +msgstr "Тахассуси далел:" -#: instrview.cpp:629 -msgid "There is an error trying to execute the command" -msgstr "" +#: dumpselectionbase.ui:544 +#, no-c-format +msgid "Event summary:" +msgstr "Натиҷаи ҷамбаст:" -#: instrview.cpp:634 instrview.cpp:900 -msgid "Check that you have installed 'objdump'." -msgstr "" +#: dumpselectionbase.ui:561 +#, no-c-format +msgid "Sum" +msgstr "Натиҷа" -#: instrview.cpp:636 instrview.cpp:902 -msgid "This utility can be found in the 'binutils' package." +#: dumpselectionbase.ui:579 +#, no-c-format +msgid "Miscellaneous:" +msgstr "Гуногун:" + +#: dumpselectionbase.ui:617 +#, no-c-format +msgid "Show" +msgstr "Нишон додан" + +#: dumpselectionbase.ui:625 +#, no-c-format +msgid "Compare" +msgstr "Муқоиса кардан" + +#: dumpselectionbase.ui:637 +#, no-c-format +msgid "State" +msgstr "Ҳолат" + +#: dumpselectionbase.ui:656 +#, no-c-format +msgid "Update" msgstr "" -#: instrview.cpp:739 -msgid "(No Assembler)" -msgstr "(Ассемблер нест)" +#: dumpselectionbase.ui:664 +#, no-c-format +msgid "Every [s]:" +msgstr "Ҳама:" -#: instrview.cpp:875 -#, c-format -msgid "" -"_n: There is %n cost line without assembler code.\n" -"There are %n cost lines without assembler code." +#: dumpselectionbase.ui:677 +#, no-c-format +msgid "Counter" +msgstr "Шуморанда" + +#: dumpselectionbase.ui:699 +#, no-c-format +msgid "Dumps Done" msgstr "" -#: instrview.cpp:877 -msgid "This happens because the code of" +#: dumpselectionbase.ui:713 +#, no-c-format +msgid "Is Collecting" msgstr "" -#: instrview.cpp:880 -msgid "does not seem to match the profile data file." +#: dumpselectionbase.ui:727 +#, no-c-format +msgid "Executed" +msgstr "Иҷро кард" + +#: dumpselectionbase.ui:740 +#, no-c-format +msgid "Basic Blocks" msgstr "" -#: instrview.cpp:883 -msgid "Are you using an old profile data file or is the above mentioned" +#: dumpselectionbase.ui:796 +#, no-c-format +msgid "Ir" msgstr "" -#: instrview.cpp:885 -msgid "ELF object from an updated installation/another machine?" -msgstr "" +#: dumpselectionbase.ui:811 +#, no-c-format +msgid "Distinct" +msgstr "Саҳеҳ" -#: instrview.cpp:893 -msgid "There seems to be an error trying to execute the command" -msgstr "" +#: dumpselectionbase.ui:838 +#, no-c-format +msgid "Functions" +msgstr "Функсияҳо" -#: instrview.cpp:898 -msgid "Check that the ELF object used in the command exists." +#: dumpselectionbase.ui:852 +#, no-c-format +msgid "Contexts" msgstr "" -#: instritem.cpp:137 -msgid "Jump %1 of %2 times to 0x%3" -msgstr "Гузаштан %1 аз %2 бор ба 0x%3" +#: dumpselectionbase.ui:890 +#, no-c-format +msgid "Stack trace:" +msgstr "Паи анбора:" -#: instritem.cpp:142 -msgid "Jump %1 times to 0x%2" -msgstr "Гузаштан %1 бор ба 0x%2" +#: dumpselectionbase.ui:898 +#, no-c-format +msgid "Sync." +msgstr "Синхр." -#: treemap.cpp:1281 -#, c-format -msgid "Text %1" -msgstr "Матни %1" +#: dumpselectionbase.ui:976 +#, no-c-format +msgid "Start" +msgstr "Сар кардан" -#: treemap.cpp:2809 -msgid "Recursive Bisection" -msgstr "" +#: dumpselectionbase.ui:1001 +#, no-c-format +msgid "Zero" +msgstr "Нул" -#: treemap.cpp:2810 -msgid "Columns" -msgstr "Сутунҳо" +#: dumpselectionbase.ui:1009 +#, no-c-format +msgid "Dump" +msgstr "Нусхабардорӣ" -#: treemap.cpp:2811 -msgid "Rows" -msgstr "Қаторҳо" +#: dumpselectionbase.ui:1021 +#, no-c-format +msgid "Messages" +msgstr "Хабарҳо" -#: treemap.cpp:2812 -msgid "Always Best" -msgstr "Ҳамавақт беҳтарин" +#: dumpselectionbase.ui:1045 +#, no-c-format +msgid "Kill Run" +msgstr "Нест кардани сардиҳӣ" -#: treemap.cpp:2813 -msgid "Best" -msgstr "Беҳтарин" +#: dumpselectionbase.ui:1070 +#, no-c-format +msgid "Clear" +msgstr "" -#: treemap.cpp:2814 -msgid "Alternate (V)" -msgstr "Тағйирёбанда (V)" +#: functionselectionbase.ui:41 +#, no-c-format +msgid "&Search:" +msgstr "&Ҷустуҷӯ:" -#: treemap.cpp:2815 -msgid "Alternate (H)" -msgstr "Тағйирёбанда (H)" +#: functionselectionbase.ui:73 +#, no-c-format +msgid "Group" +msgstr "Гурӯҳ" -#: treemap.cpp:2872 -msgid "Nesting" -msgstr "Ташаккулёбии лона" +#: partselectionbase.ui:60 +#, no-c-format +msgid "(no trace parts)" +msgstr "(қисмҳои пай нест)" -#: treemap.cpp:2875 -msgid "Correct Borders Only" -msgstr "" +#: stackselectionbase.ui:16 +#, no-c-format +msgid "Stack Selection" +msgstr "Интихоб кардани анбора" -#: treemap.cpp:2877 treemap.cpp:2878 treemap.cpp:2879 treemap.cpp:2880 -#, c-format -msgid "Width %1" -msgstr "Бар %1" +#: stackselectionbase.ui:42 +#, no-c-format +msgid "Cost2" +msgstr "Нархи 2" -#: treemap.cpp:2902 -msgid "Visible" +#: tdecachegrindui.rc:4 +#, fuzzy, no-c-format +msgid "&File" +msgstr "Файл:" + +#: tdecachegrindui.rc:10 +#, no-c-format +msgid "&View" msgstr "" -#: treemap.cpp:2903 -msgid "Take Space From Children" -msgstr "Гирифтани кайҳон аз кӯдакон" +#: tdecachegrindui.rc:15 +#, no-c-format +msgid "&Layout" +msgstr "&Схема" -#: treemap.cpp:2905 -msgid "Top Left" -msgstr "Тарафи чапи боло" +#: tdecachegrindui.rc:32 +#, no-c-format +msgid "Sidebars" +msgstr "" -#: treemap.cpp:2906 -msgid "Top Center" -msgstr "Маркази боло" +#: tdecachegrindui.rc:41 +#, no-c-format +msgid "Main Toolbar" +msgstr "" -#: treemap.cpp:2907 -msgid "Top Right" -msgstr "Тарафи рости боло" +#: tdecachegrindui.rc:54 +#, no-c-format +msgid "State Toolbar" +msgstr "" -#: treemap.cpp:2909 -msgid "Bottom Center" -msgstr "Маркази поён" +#: tips:3 +msgid "" +"...that the What's This? help for every GUI widget\n" +"in KCachegrind contains detailed usage information for this widget?\n" +"It is highly recommended to read at least these help texts on first\n" +"use. Request What's This? help by pressing\n" +"Shift+F1 and clicking on the widget.
\n" +msgstr "" -#: treemap.cpp:2910 -msgid "Bottom Right" -msgstr "Тарафи рости поён" +#: tips:13 +msgid "" +"...that you can get profile information at instruction level\n" +"with Calltree when you provide the option --dump-instr=yes?\n" +"Use the Assembler View for the instruction annotations.\n" +"
\n" +msgstr "" -#: treemap.cpp:2987 -msgid "No %1 Limit" -msgstr "Ҳудуди %1 нест" +#: tips:22 +msgid "" +"...that you can use Alt-Left/Right keys of your keyboard to go\n" +"back/forward in the active object history ?
\n" +msgstr "" -#: treemap.cpp:3056 treemap.cpp:3067 -#, c-format +#: tips:29 msgid "" -"_n: 1 Pixel\n" -"%n Pixels" +"...that you can navigate in the Callee/Caller Map View using\n" +"arrow keys? Use Left/Right to change to siblings of the current\n" +"item; use Up/Down to go one nesting level up/down. To select\n" +"the current item, press Space, and to activate it, press Return.\n" +"
\n" msgstr "" -"%n пиксел\n" -"%n пикселҳо" -#: treemap.cpp:3073 -msgid "Halve Area Limit (to %1)" -msgstr "Ду тақсим кардани ҳудуди фазо (то %1)" +#: tips:39 +msgid "" +"...that you can navigate in the Call Graph View using\n" +"arrow keys? Use Up/Down to go one calling level up/down, alternating\n" +"between calls and functions. Use Left/Right to change to siblings of a " +"current\n" +"selected call. To activate the current item, press Return.\n" +"
\n" +msgstr "" -#: treemap.cpp:3118 -#, c-format -msgid "Depth %1" -msgstr "Чуқурӣ %1" +#: tips:49 +msgid "" +"...that you can rapidly locate a function by entering part of its\n" +"name (case-insensitive) into the edit line of the toolbar\n" +"and hit return?
\n" +msgstr "" -#: treemap.cpp:3122 -msgid "Decrement (to %1)" +#: tips:57 +msgid "" +"...that you can assign custom colors to \n" +"ELF objects/C++ Classes/Source Files for graph coloring\n" +"in Settings->Configure KCachegrind...?
\n" msgstr "" -#: treemap.cpp:3124 -msgid "Increment (to %1)" +#: tips:65 +msgid "" +"...that you can see if debug info is available for a selected \n" +"function by looking at the location label in the Info tab or\n" +"the source listing header in the source tab?
\n" +"There must be the name of the source file (with extension).\n" +"If KCachegrind still doesn't show the source, make sure that you\n" +"have added the directory of the source file to the\n" +"Source Directories list in the configuration.\n" msgstr "" -#: traceitemview.cpp:53 -msgid "No description available" +#: tips:77 +msgid "" +"
...that you can configure whether KCachgrind should\n" +"show absolute event counts or relative ones (percentage display)?
\n" msgstr "" -#: coverageview.cpp:48 coverageview.cpp:54 -msgid "Distance" -msgstr "Фосила" +#: tips:84 +msgid "" +"...that you can configure the maximum number of items\n" +"for all function lists in KCachegrind? Limiting the number\n" +"of items is done to get a fast reacting GUI. The last item in\n" +"the list will show you the number of skipped functions, together\n" +"with a cost condition for these skipped functions.
\n" +"To activate a function with small costs, search for it and select\n" +"it in the flat profile. Selecting functions with small cost will\n" +"temporarily add them to the flat profile list.
\n" +msgstr "" -#: coverageview.cpp:55 -msgid "Calling" -msgstr "Дархостан" +#: tips:97 +msgid "" +"...that the Coverage tab - in contrast to the Call Lists tab -\n" +"shows all functions that are calling the selected function\n" +"(upper part) / are called by the selected function (bottom part),\n" +"no matter how many function are between them on the stack?
\n" +"Examples:
\n" +"An entry in the upper list for function foo1() with a value of 50%\n" +"with function bar() selected means that 50% of all the cost of function\n" +"bar() happened while called from function foo1().
\n" +"An entry in the bottom list for function foo2() with a value of 50%\n" +"with function bar() selected means that 50% of all the cost of function\n" +"bar() happened while calling foo2() from bar().
\n" +msgstr "" -#: coverageview.cpp:90 +#: tips:113 msgid "" -"List of all Callers" -"This list shows all functions calling the current selected one, either " -"directly or with several functions in-between on the stack; the number of " -"functions in-between plus one is called the Distance " -"(e.g. for function A,B,C there exists a call from A to C when A calls B and B " -"calls C, i.e. A => B => C. The distance here is 2).
" -"Absolute cost shown is the cost spent in the selected function while a " -"listed function is active; relative cost is the percentage of all cost spent in " -"the selected function while the listed one is active. The cost graphic shows " -"logarithmic percentage with a different color for each distance.
" -"As there can be many calls from the same function, the distance column " -"sometimes shows the range of distances for all calls happening; then, in " -"parentheses, there is the medium distance, i.e. the distance where most of the " -"call costs happened.
" -"Selecting a function makes it the current selected one of this information " -"panel. If there are two panels (Split mode), the function of the other panel is " -"changed instead.
" +"...that waiting for the tool tip inside of a tree map\n" +"shows the list of names of the nested rectangles the mouse\n" +"pointer is over?
\n" +"Items from this list can be selected by pressing the right\n" +"mouse button.
\n" msgstr "" -#: coverageview.cpp:120 +#: tips:123 msgid "" -"List of all Callees" -"This list shows all functions called by the current selected one, either " -"directly or with several function in-between on the stack; the number of " -"function in-between plus one is called the Distance " -"(e.g. for function A,B,C there exists a call from A to C when A calls B and B " -"calls C, i.e. A => B => C. The distance here is 2).
" -"Absolute cost shown is the cost spent in the listed function while the " -"selected is active; relative cost is the percentage of all cost spent in the " -"listed function while the selected one is active. The cost graphic always shows " -"logarithmic percentage with a different color for each distance.
" -"As there can be many calls to the same function, the distance column " -"sometimes shows the range of distances for all calls happening; then, in " -"parentheses, there is the medium distance, i.e. the distance where most of the " -"call costs happened.
" -"Selecting a function makes it the current selected one of this information " -"panel. If there are two panels (Split mode), the function of the other panel is " -"changed instead.
" +"...that you can constrain the cost counts shown to only a\n" +"few parts of the whole trace by selecting these parts in the\n" +"\"Trace Selection\" Dockable?
\n" +"To generate multiple parts in a profiling run with\n" +"cachegrind, use e.g. option --cachedumps=xxx for parts\n" +"of a length of xxx basic blocks (A basic block is a run\n" +"of not-branching assembler statements inside of your program\n" +"code).
\n" msgstr "" -- cgit v1.2.1