From ff4fa4a4bcbcb8f46cd9231b0a5f3b3d19f5989c Mon Sep 17 00:00:00 2001
From: Automated System %2 %2 Use this combo box to select the printer to which you want to print. "
-"Initially (if you run TDEPrint for the first time), you may only find the "
-"TDE special printers (which save jobs to disk [as PostScript- or "
-"PDF-files], or deliver jobs via email (as a PDF attachment). If you are missing "
-"a real printer, you need to... "
-" Note: It may happen that you successfully connected to a remote CUPS "
-"server and still do not get a printer list. If this happens: force TDEPrint to "
-"re-load its configuration files. To reload the configuration files, either "
-"start kprinter again, or use the switch the print system away from CUPS and "
-"back again once. The print system switch can be made through a selection in "
-"the drop-down menu at bottom of this dialog when fully expanded). ใช้กล่องคอมโบนี้เพื่อเลือกเครื่องพิมพ์ที่คุณต้องการจะใช้ในการพิมพ์ "
-"การเริ่มการทำงาน (หากคุณเรียกเครื่องมือจัดการการพิมพ์ (TDEPrint) เป็นครั้งแรก) "
-"จะอาจจะพบเพียง เครื่องพิมพ์แบบพิเศษ (ใช้บันทึกงานพิมพ์ลงดิสก์เป็นแฟ้ม "
-"[เช่น แฟ้มโพสสคริปต์ หรือ แฟ้ม PDF] หรืออาจจะส่งงานพิมพ์ผ่านทางอีเมล์ "
-"(เป็นแฟ้มแนบแบบ PDF) "
-"หากเครื่องพิมพ์ที่คุณมีอยู่ยังไม่มีในรายการเครื่องพิมพ์คุณต้อง... "
-" ข้อควรจำ: เมื่อคุณเชื่อมต่อไปยังระบบการพิมพ์ CUPS เรียบร้อยแล้ว "
-"แต่ก็ยังไม่มีรายการเครื่องพิมพ์อยู่ คุณสามารถบังคับให้เครื่องมือการพิมพ์ "
-"(TDEPrint) ทำการโหลดแฟ้มปรับแต่งใหม่อีกครั้ง "
-"จากนั้นให้เรียกโปรแกรมระบบการพิมพ์ใหม่อีกครั้ง "
-"หรือเปลี่ยนระบบการพิมพ์เป็นตัวอื่นแทน CUPS แล้วย้อนกลับมาทำใหม่อีกครั้ง "
-"การเปลี่ยนระบบการพิมพ์นั้นทำได้โดยการเลือกจากรายการเลื่อนลงทางด้านล่างของกล่องโต"
-"้ตอบนี้ This button opens a dialog where you can make decisions regarding all "
-"supported print job options. ปุ่มนี้จะทำการเปิดกล่องโต้ตอบ "
-"ซึ่่งจะให้คุณเลือกและปรับแต่งตัวเลือกของงานพิมพ์ได้ This button reduces the list of visible printers to a shorter, more "
-"convenient, pre-defined list. This is particularly useful in enterprise environments with lots of "
-"printers. The default is to show all printers. To create a personal 'selective view list', click on the "
-"'System Options' button at the bottom of this dialog. Then, in the new "
-"dialog, select 'Filter' (left column in the "
-"TDE Print Configuration dialog) and setup your selection.. Warning: Clicking this button without prior creation of a personal "
-"'selective view list' will make all printers dissappear from the "
-"view. (To re-enable all printers, just click this button again.) This button starts the TDE Add Printer Wizard. Use the Wizard (with \"CUPS\" or \"RLPR\""
-") to add locally defined printers to your system. Note: The TDE Add Printer Wizard does not "
-"work, and this button is disabled if you use \"Generic LPD\", "
-"\"LPRng\", or \"Print Through an External Program\".) Here you can enter any command that would also print for you in a "
-"konsole window. This button shows or hides additional printing options. This button starts a new dialog where you can adjust various settings of "
-"your printing system. Amongst them: "
-" \"General\" This dialog page contains general print job settings. General "
+"settings are applicable to most printers, most jobs and most job file types. "
+" To get more specific help, enable the \"WhatsThis\" cursor and click on any "
+"of the text labels or GUI elements of this dialog. If you enable this checkbox, the printing dialog stays open after you hit "
-"the Print button. This is especially useful, if you need to test various print settings (like "
-"color matching for an inkjet printer) or if you want to send your job to "
-"multiple printers (one after the other) to have it finished more quickly. Page size: Select paper size to be printed on from the drop-down "
+"menu. The exact list of choices depends on the printer driver (\"PPD\") you have "
+"installed. Additional hint for power users: This TDEPrint GUI element "
+"matches with the CUPS commandline job option parameter: "
+" "
-"
"
-" "
-"
"
-"a2ps -P <printername> --medium=A3
. "
-"
"
-"and many more....
"
+"
"
+" -o PageSize=... # examples: \"A4\" or \"Letter\"
Paper type: Select paper type to be printed on from the drop-down " +"menu.
" +"The exact list of choices depends on the printer driver (\"PPD\") you have " +"installed.
" +"Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o MediaType=... # example: \"Transparency\"
Paper source: Select paper source tray for the paper to be printed on " +"from the drop-down menu. " +"
The exact list of choices depends on the printer driver (\"PPD\") you have " +"installed.
" +"Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o InputSlot=... # examples: \"Lower\" or \"LargeCapacity\" " +"
Image Orientation: Orientation of the printed page image on your " +"paper is controlled by the radio buttons. By default, the orientation is " +"Portrait " +"
You can select 4 alternatives: " +"
Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o orientation-requested=... # examples: \"landscape\" or " +"\"reverse-portrait\"
This button calls the \"File Open / Browse Directories\" dialog to allow you " -"to select a file for printing. Note, that " -"
Duplex Printing: These controls may be grayed out if your printer " +"does not support duplex printing (i.e. printing on both sides of the " +"sheet). These controls are active if your printer supports duplex printing. " +"
You can choose from 3 alternatives:
" +"Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o duplex=... # examples: \"tumble\" or \"two-sided-short-edge\" " +"
Note: The preview feature (and therefore this checkbox) is only " -"visible for printjobs created from inside TDE applications. If you start " -"kprinter from the commandline, or if you use kprinter as a print command for " -"non-TDE applications (like Acrobat Reader, Firefox or OpenOffice), print " -"preview is not available here.
Banner Page(s): Select banner(s) to print one or two special sheets " +"of paper just before or after your main job.
" +"Banners may contain some pieces of job information, such as user name, time " +"of printing, job title and more.
" +"Banner pages are useful to separate different jobs more easily, especially " +"in a multi-user environment.
" +"Hint: You can design your own banner pages. To make use of " +"them, just put the banner file into the standard CUPS banners " +"directory (This is usually \"/usr/share/cups/banner/\" " +"Your custom banner(s) must have one of the supported printable formats. " +"Supported formats are ASCII text, PostScript, PDF and nearly any image format " +"such as PNG, JPEG or GIF. Your added banner pages will appear in the drop down " +"menu after a restart of CUPS.
" +"CUPS comes with a selection of banner pages.
" +"Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o job-sheets=... # examples: \"standard\" or \"topsecret\" " +"
Note: (Button is only visible if the checkbox for " -"System Options --> General --> Miscellaneous: " -"\"Defaults to the last printer used in the application\" " -"is disabled.)
Pages per Sheet: You can choose to print more than one page onto " +"each sheet of paper. This is sometimes useful to save paper.
" +"Note 1: the page images get scaled down accordingly to print 2 or 4 " +"pages per sheet. The page image does not get scaled if you print 1 page per " +"sheet (the default setting.). " +"
Note 2: If you select multiple pages per sheet here, the scaling and " +"re-arranging is done by your printing system. Be aware, that some printers can " +"by themselves print multiple pages per sheet. In this case you find the option " +"in the printer driver settings. Be careful: if you enable multiple pages per " +"sheet in both places, your printout will not look as you intended.
" +"Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o number-up=... # examples: \"2\" or \"4\"
%2
" -msgstr "%1: การประมวลผลผิดพลาด โดยแจ้งว่า:%2
" +#: management/kxmlcommandselector.cpp:220 +msgid "Internal error. The XML driver for the command %1 could not be found." +msgstr "เกิดความผิดพลาดภายใน ไม่พบไดรเวอร์ XML สำหรับคำสั่ง %1" -#: lpr/kmlprjobmanager.cpp:83 -msgid "Unsupported operation." -msgstr "ไม่สนับสนุนปฏิบัติการนี้" +#: management/kxmlcommandselector.cpp:238 +msgid "output" +msgstr "ส่งออก" -#: lpr/kmconfiglpr.cpp:33 lpr/kmconfiglpr.cpp:37 -msgid "Spooler" -msgstr "ที่พักข้อมูล" +#: management/kxmlcommandselector.cpp:242 +msgid "undefined" +msgstr "ยังไม่กำหนด" -#: lpr/kmconfiglpr.cpp:34 -msgid "Spooler Settings" -msgstr "ตั้งค่าที่พักข้อมูล" +#: management/kxmlcommandselector.cpp:247 +msgid "not allowed" +msgstr "ไม่อนุญาต" -#: lpr/kmlprmanager.cpp:289 -msgid "The printcap file is a remote file (NIS). It cannot be written." -msgstr "" -"เอกสาร printcap เป็นเอกสารแบบระยะไกล (NIS) ซึ่งไม่สามารถเขียนไปยังมันได้" +#: management/kxmlcommandselector.cpp:253 +msgid "(Unavailable: requirements not satisfied)" +msgstr "(ไม่สามารถใช้ได้: ไม่เพียงพอกับความต้องการ)" -#: lpr/kmlprmanager.cpp:305 -msgid "" -"Unable to save printcap file. Check that you have write permissions for that " -"file." -msgstr "" -"ไม่สามารถบันทึกเอกสาร printcap ได้ โปรดตรวจสอบว่า " -"คุณมีสิทธิ์เขียนไปยังเอกสารดังกล่าว" +#: management/kmwsmb.cpp:35 +msgid "SMB Printer Settings" +msgstr "ปรับแต่งเครื่องพิมพ์แบบ SMB" -#: lpr/kmlprmanager.cpp:330 -msgid "Internal error: no handler defined." -msgstr "เกิดข้อผิดพลาดภายใน: ยังไม่ได้กำหนดตัวจัดการ" +#: management/kmwsmb.cpp:41 +msgid "Scan" +msgstr "ค้นหา" -#: lpr/kmlprmanager.cpp:344 -msgid "Couldn't determine spool directory. See options dialog." -msgstr "ไม่สามารถหาไดเร็กทอรีที่พักงานพิมพ์ได้ โปรดดูที่กล่องตัวเลือก" +#: management/kmwsmb.cpp:42 +msgid "Abort" +msgstr "เลิกทำ" -#: lpr/kmlprmanager.cpp:350 -msgid "" -"Unable to create the spool directory %1. Check that you have the required " -"permissions for that operation." -msgstr "" -"ไม่สามารถสร้างไดเร็กทอรีพักข้อมูล %1 ได้ โปรดตรวจสอบว่า " -"คุณมีสิทธิ์ในการสร้างหรือไม่" +#: management/kmwsmb.cpp:44 +msgid "Workgroup:" +msgstr "กลุ่มงาน:" -#: lpr/kmlprmanager.cpp:382 -#, c-format -msgid "" -"The printer has been created but the print daemon could not be restarted. %1" -msgstr "" -"ได้ทำการสร้างเครื่องพิมพ์แล้ว แต่เซิร์ฟเวอร์การพิมพ์ไม่สามารถเริ่มทำงานใหม่ได้ " -"%1" +#: management/kmwsmb.cpp:45 +msgid "Server:" +msgstr "เซิร์ฟเวอร์:" -#: lpr/kmlprmanager.cpp:410 -msgid "" -"Unable to remove spool directory %1. Check that you have write permissions for " -"that directory." -msgstr "" -"ไม่สามารถลบไดเร็กทอรีพักข้อมูล %1 ได้ โปรดตรวจสอบว่า " -"คุณมีสิทธิ์ในการเขียนไปยังไดเร็กทอรีนี้หรือไม่" +#: management/kmwsmb.cpp:46 tools/escputil/escpwidget.cpp:99 +msgid "Printer:" +msgstr "เครื่องพิมพ์:" -#: lpr/kmlprmanager.cpp:458 -msgid "&Edit printcap Entry..." -msgstr "แก้ไขรายการ printcap..." +#: cups/kmwipp.cpp:52 management/kmwsmb.cpp:79 +msgid "Empty server name." +msgstr "ไม่มีชื่อเซิร์ฟเวอร์" -#: lpr/kmlprmanager.cpp:473 -msgid "" -"Editing a printcap entry manually should only be done by confirmed system " -"administrator. This may prevent your printer from working. Do you want to " -"continue?" -msgstr "" -"การแก้ไขรายการ printcap โดยตรง ควรจะได้รับการอนุญาตจากผู้ดูแลระบบเสียก่อน " -"เพื่อมิให้เกิดปัญหาที่เครื่องพิมพ์ไม่สามารถทำงานได้ คุณต้องการจะทำต่อไปหรือไม่ " -"?" +#: management/kmwsmb.cpp:81 rlpr/kmrlprmanager.cpp:45 +msgid "Empty printer name." +msgstr "ไม่มีชื่อเครื่องพิมพ์" -#: lpr/kmlprmanager.cpp:489 +#: management/kmwsmb.cpp:99 #, c-format -msgid "Spooler type: %1" -msgstr "ประเภทที่พักข้อมูล: %1" +msgid "Login: %1" +msgstr "ล็อกอิน: %1" -#: lpr/matichandler.cpp:82 -msgid "Network printer" -msgstr "เครื่องพิมพ์แบบเครือข่าย" +#: management/kmwsmb.cpp:99 +msgid "Characters Per Inch
" -"This setting controls the horizontal size of characters when printing a text " -"file.
" -"The default value is 10, meaning that the font is scaled in a way that 10 " -"characters per inch will be printed.
" -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o cpi=... # example: \"8\" or \"12\"
Lines Per Inch
" -"This setting controls the vertical size of characters when printing a text " -"file.
" -"The default value is 6, meaning that the font is scaled in a way that 6 " -"lines per inch will be printed.
" -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o lpi=... # example \"5\" or \"7\"
Columns
" -"This setting controls how many columns of text will be printed on each page " -"when. printing text files.
" -"The default value is 1, meaning that only one column of text per page will " -"be printed.
" -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o columns=... # example: \"2\" or \"4\"
Text Formats
" -"These settings control the appearance of text on printouts. They are only " -"valid for printing text files or input directly through kprinter.
" -"Note: These settings have no effect whatsoever for other input " -"formats than text, or for printing from applications such as the KDE Advanced " -"Text Editor. (Applications in general send PostScript to the print system, and " -"'kate' in particular has its own knobs to control the print output.
. " -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o cpi=... # example: \"8\" or \"12\" " -"
-o lpi=... # example: \"5\" or \"7\" " -"
-o columns=... # example: \"2\" or \"4\"
Margins
" -"These settings control the margins of printouts on the paper. They are not " -"valid for jobs originating from applications which define their own page " -"layout internally and send PostScript to TDEPrint (such as KOffice or " -"OpenOffice.org).
" -"When printing from KDE applications, such as KMail and Konqueror, or " -"printing an ASCII text file through kprinter, you can choose your preferred " -"margin settings here.
" -"Margins may be set individually for each edge of the paper. The combo box at " -"the bottom lets you change the units of measurement between Pixels, " -"Millimeters, Centimeters, and Inches.
" -"You can even use the mouse to grab one margin and drag it to the intended " -"position (see the preview picture on the right side).
" -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o page-top=... # example: \"72\" " -"
-o page-bottom=... # example: \"24\" " -"
-o page-left=... # example: \"36\" " -"
-o page-right=... # example: \"12\"
Turn Text Printing with Syntax Highlighting (Prettyprint) On!
" -"ASCII text file printouts can be 'prettyfied' by enabling this option. If " -"you do so, a header is printed at the top of each page. The header contains " -"the page number, job title (usually the filename), and the date. In addition, C " -"and C++ keywords are highlighted, and comment lines are italicized.
" -"This prettyprint option is handled by CUPS.
" -"If you prefer another 'plaintext-to-prettyprint' converter, look for the " -"enscript pre-filter on the Filters tab.
" -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o prettyprint=true.
This backend may require a login/password to work properly. Select the type " +"of access to use and fill in the login and password entries if needed.
" msgstr "" +"ประเภทเครื่องพิมพ์นี้ต้องการชื่อผู้ใช้/รหัสผ่านในการทำงาน " +"เลือกประเภทของการเข้าถึงที่จะใช้ " +"และกรอกข้อมูลล็อกอินและรหัสผ่านหากมีการร้องขอ
" -#: cups/kptextpage.cpp:153 -msgid "" -"Turn Text Printing with Syntax Highlighting (Prettyprint) Off!
" -"ASCII text file printing with this option turned off are appearing without a " -"page header and without syntax highlighting. (You can still set the page " -"margins, though.)
" -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o prettyprint=false
Print Text with Syntax Highlighting (Prettyprint)
" -"ASCII file printouts can be 'prettyfied' by enabling this option. If you do " -"so, a header is printed at the top of each page. The header contains the page " -"number, job title (usually the filename), and the date. In addition, C and C++ " -"keywords are highlighted, and comment lines are italicized.
" -"This prettyprint option is handled by CUPS.
" -"If you prefer another 'plaintext-to-prettyprint' converter, look for the " -"enscript pre-filter on the Filters tab.
" -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o prettyprint=true. " -"
-o prettyprint=false
The 'blackplot' option specifies that all pens should plot in black-only: " -"The default is to use the colors defined in the plot file, or the standard pen " -"colors defined in the HP-GL/2 reference manual from Hewlett Packard.
" -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o blackplot=true
Now you can test the printer before finishing installation. Use the " +"Settings button to configure the printer driver and the Test " +"button to test your configuration. Use the Back " +"button to change the driver (your current configuration will be discarded).
" msgstr "" +"คุณสามารถทดสอบเครื่องพิมพ์ก่อนเสร็จการติดตั้งได้ในตอนนี้ โดยใช้ปุ่ม " +"ตั้งค่า เพื่อปรับแต่งไดรเวอร์เครื่องพิมพ์ และใช้ปุ่ม ทดสอบ " +"เพื่อทดสอบการปรับแต่งของคุณ ใช้ปุ่ม ย้อนกลับ เพื่อเปลี่ยนไดรเวอร์ " +"(การปรับแต่งปัจจุบันของคุณจะถูกยกเลิก)
" -#: cups/kphpgl2page.cpp:48 +#: management/kmwdrivertest.cpp:117 +msgid "%1
%1
The 'fitplot' option specifies that the HP-GL image should be scaled to fill " -" exactly the page with the (elsewhere selected) media size.
" -"The default is 'fitplot is disabled'. The default will therefore use the " -"absolute distances specified in the plot file. (You should be aware that HP-GL " -"files are very often CAD drawings intended for large format plotters. On " -"standard office printers they will therefore lead to the drawing printout " -"being spread across multiple pages.)
" -"Note:This feature depends upon an accurate plot size (PS) command in " -"the HP-GL/2 file. If no plot size is given in the file the filter converting " -"the HP-GL to PostScript assumes the plot is ANSI E size.
" -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o fitplot=true
The pen width value can be set here in case the original HP-GL file does not " -"have it set. The pen width specifies the value in micrometers. The default " -"value of 1000 produces lines that are 1000 micrometers == 1 millimeter in " -"width. Specifying a pen width of 0 produces lines that are exactly 1 pixel " -"wide.
" -"Note: The penwidth option set here is ignored if the pen widths are " -"set inside the plot file itself..
" -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o penwidth=... # example: \"2000\" or \"500\"
All options on this page are only applicable if you use TDEPrint to send " -"HP-GL and HP-GL/2 files to one of your printers.
" -"HP-GL and HP-GL/2 are page description languages developed by " -"Hewlett-Packard to drive Pen Plotting devices.
" -"TDEPrint can (with the help of CUPS) convert the HP-GL file format and print " -"it on any installed printer.
" -"Note 1: To print HP-GL files, start 'kprinter' and simply load the " -"file into the running kprinter.
" -"Note 2: The 'fitplot' parameter provided on this dialog does also " -"work for printing PDF files (if your CUPS version is more recent than " -"1.1.22).
" -"Additional hint for power users: These TDEPrint GUI elements " -"match with CUPS commandline job option parameters: " -"
-o blackplot=... # examples: \"true\" or \"false\" " -"
-o fitplot=... # examples: \"true\" or \"false\" " -"
-o penwidth=... # examples: \"true\" or \"false\"
Print queue on remote CUPS server
" -"Use this for a print queue installed on a remote machine running a CUPS " -"server. This allows to use remote printers when CUPS browsing is turned off.
" -"Locally-connected printer
" +"Use this for a printer connected to the computer via a parallel, serial or " +"USB port.
" msgstr "" - -#: cups/kmcupsuimanager.cpp:94 -msgid "" "Network IPP printer
" -"Use this for a network-enabled printer using the IPP protocol. Modern " -"high-end printers can use this mode. Use this mode instead of TCP if your " -"printer can do both.
เครื่องพิมพ์แบบต่อตรง
" +"เลือกตัวเลือกนี้สำหรับเครื่องพิมพ์ที่ต่อตรงเข้ากับเครื่องของคุณ " +"ซึ่งอาจจะต่อผ่านทางพอร์ตขนาน, อนุกรม หรือ USB ก็ได้
" -#: cups/kmcupsuimanager.cpp:101 +#: management/kmwbackend.cpp:122 +msgid "&SMB shared printer (Windows)" +msgstr "เครื่องพิมพ์แบบเครือข่าย &SMB (วินโดว์ส)" + +#: management/kmwbackend.cpp:123 msgid "" "Fax/Modem printer
" -"Use this for a fax/modem printer. This requires the installation of the fax4CUPS " -"backend. Documents sent on this printer will be faxed to the given target fax " -"number.
Shared Windows printer
" +"Use this for a printer installed on a Windows server and shared on the " +"network using the SMB protocol (samba).
" msgstr "" +"เครื่องพิมพ์แบบเครือข่าย
" +"เลือกตัวเลือกนี้หากเครื่องพิมพ์ที่คุณต้องการใช้ " +"เชื่อมต่ออยู่กับเครื่องคอมพิวเตอร์ที่ใช้ระบบวินโดว์ส หรือใช้งานผ่านโปรโตคอล SMB " +"(เช่น samba)
Other printer
" -"Use this for any printer type. To use this option, you must know the URI of " -"the printer you want to install. Refer to the CUPS documentation for more " -"information about the printer URI. This option is mainly useful for printer " -"types using 3rd party backends not covered by the other possibilities.
Print queue on a remote LPD server
" +"Use this for a print queue existing on a remote machine running a LPD print " +"server.
" msgstr "" +"พิมพ์ไปยังเครื่องพิมพ์บนเครือข่ายที่ให้บริการเซิร์ฟเวอร์ LPD
" +"เลือกตัวเลือกนี้สำหรับการพิมพ์ผ่านเครือข่าย " +"โดยเครื่องที่ให้บริการเปิดบริการผ่านเซิร์ฟเวอร์งานพิมพ์แบบ LPD
Class of printers
" -"Use this to create a class of printers. When sending a document to a class, " -"the document is actually sent to the first available (idle) printer in the " -"class. Refer to the CUPS documentation for more information about class of " -"printers.
Network TCP printer
" +"Use this for a network-enabled printer using TCP (usually on port 9100) as " +"communication protocol. Most network printers can use this mode.
" msgstr "" +"เครื่องพิมพ์แบบเครือข่าย TCP
" +"เลือกตัวเลือกนี้สำหรับเครื่องพิมพ์ที่เป็นแบบเครื่องพิมพ์เครือข่าย " +"โดยสื่อสารทางโปรโตคอล TCP (มักจะเปิดให้บริการด้วยพอร์ตหมายเลข 9100) " +"โดยทั่วไปแล้วจะสามารถใช้ตัวเลือกนี้กับเครื่องพิมพ์ที่เป็นแบบเครือข่ายในตัวได้เลย" +"
The printing will be redirected to a file. Enter here the path of the file " +"you want to use for redirection. Use an absolute path or the browse button for " +"graphical selection.
" +msgstr "" +"การพิมพ์จะถูกส่งออกเป็นเอกสาร " +"โปรดเติมชื่อเอกสารและเส้นทางของเอกสารที่คุณต้องการส่งออก " +"เติมเส้นทางเองหรือใช้ปุ่มเลือกเอกสาร สำหรับการเลือกในแบบกราฟิกก็ได้
" -#: cups/kmcupsuimanager.cpp:134 -msgid "Cl&ass of printers" -msgstr "คลาสของเครื่องพิมพ์" +#: management/kmwfile.cpp:44 +msgid "Print to file:" +msgstr "พิมพ์ไปยังเอกสาร:" -#: cups/kmcupsuimanager.cpp:190 -msgid "An error occurred while retrieving the list of available backends:" -msgstr "เกิดความผิดพลาดในระหว่างรับรายการประเภทเครื่องพิมพ์ที่มี:" +#: management/kmconfiggeneral.cpp:137 management/kmwfile.cpp:60 +msgid "Empty file name." +msgstr "ไม่มีชื่อเอกสาร" -#: cups/kmcupsuimanager.cpp:236 -msgid "Priority" -msgstr "ลำดับความสำคัญ" +#: management/kmwfile.cpp:66 +msgid "Directory does not exist." +msgstr "ยังไม่มีไดเร็กทอรีอยู่" -#: cups/kmcupsuimanager.cpp:238 -msgid "Billing Information" -msgstr "ข้อมูลค่าใช้จ่าย" +#: lpr/editentrydialog.cpp:46 management/kxmlcommanddlg.cpp:107 +msgid "String" +msgstr "ข้อความ" -#: cups/kmconfigcupsdir.cpp:34 -msgid "Folder" -msgstr "โฟลเดอร์" +#: management/kxmlcommanddlg.cpp:108 +msgid "Integer" +msgstr "จำนวนเต็ม" -#: cups/kmconfigcupsdir.cpp:35 -msgid "CUPS Folder Settings" -msgstr "ตั้งค่าโฟลเดอร์ CUPS" +#: management/kxmlcommanddlg.cpp:109 +msgid "Float" +msgstr "จำนวนทศนิยม" -#: cups/kmconfigcupsdir.cpp:38 -msgid "Installation Folder" -msgstr "ไดเร็กทอรีที่ใช้ติดตั้ง" +#: management/kxmlcommanddlg.cpp:110 +msgid "List" +msgstr "ลิสต์" -#: cups/kmconfigcupsdir.cpp:41 -msgid "Standard installation (/)" -msgstr "การติดตั้งแบบมาตรฐาน (/)" +#: lpr/editentrydialog.cpp:48 management/kxmlcommanddlg.cpp:111 +msgid "Boolean" +msgstr "ตรรกะ" -#: cups/kmwusers.cpp:41 -msgid "Allowed Users" -msgstr "ผู้ใช้ที่อนุญาต" +#: kprintdialog.cpp:278 management/kmspecialprinterdlg.cpp:56 +#: management/kxmlcommanddlg.cpp:114 +msgid "&Name:" +msgstr "ชื่อ:" -#: cups/kmwusers.cpp:42 -msgid "Denied Users" -msgstr "ผู้ใช้ที่ไม่อนุญาต" +#: management/kmspecialprinterdlg.cpp:57 management/kxmlcommanddlg.cpp:115 +#: management/kxmlcommanddlg.cpp:866 +msgid "&Description:" +msgstr "รายละเอียด:" -#: cups/kmwusers.cpp:44 -msgid "Define here a group of allowed/denied users for this printer." -msgstr "กำหนดกลุ่มผู้ใช้ที่จะอนุญาต / ไม่อนุญาตให้ใช้เครื่องพิมพ์ที่นี่" +#: management/kmspecialprinterdlg.cpp:83 management/kxmlcommanddlg.cpp:116 +msgid "&Format:" +msgstr "รูปแบบ:" #: cups/kmwusers.cpp:45 management/kxmlcommanddlg.cpp:117 msgid "&Type:" msgstr "ประเภท:" -#: cups/cupsaddsmb2.cpp:55 cups/cupsaddsmb2.cpp:363 -msgid "&Export" -msgstr "ส่งออก" - -#: cups/cupsaddsmb2.cpp:61 -msgid "Export Printer Driver to Windows Clients" -msgstr "ส่งออกไดรเวอร์เครื่องพิมพ์ไปยังไคลเอนต์วินโดว์ส" +#: management/kxmlcommanddlg.cpp:118 +msgid "Default &value:" +msgstr "ค่าปริยาย:" -#: cups/cupsaddsmb2.cpp:72 -msgid "&Username:" -msgstr "ชื่อผู้ใช้:" +#: management/kxmlcommanddlg.cpp:119 +msgid "Co&mmand:" +msgstr "คำสั่ง:" -#: cups/cupsaddsmb2.cpp:73 -msgid "&Samba server:" -msgstr "เซิร์ฟเวอร์ &Samba:" +#: management/kxmlcommanddlg.cpp:126 +msgid "&Persistent option" +msgstr "ตัวเลือกถาวร" -#: cups/cupsaddsmb2.cpp:74 management/kmwpassword.cpp:50 -msgid "&Password:" -msgstr "รหัสผ่าน:" +#: management/kxmlcommanddlg.cpp:128 +msgid "Va&lues" +msgstr "ค่า" -#: cups/cupsaddsmb2.cpp:79 +#: management/kxmlcommanddlg.cpp:136 +msgid "Minimum v&alue:" +msgstr "ค่าน้อยที่สุด:" + +#: management/kxmlcommanddlg.cpp:137 +msgid "Ma&ximum value:" +msgstr "ค่ามากที่สุด:" + +#: cups/kptagspage.cpp:82 kpfilterpage.cpp:406 management/kmjobviewer.cpp:237 +#: management/kmwend.cpp:51 management/kxmlcommanddlg.cpp:141 +#: management/kxmlcommanddlg.cpp:545 tdefilelist.cpp:101 +msgid "Name" +msgstr "ชื่อ" + +#: management/kmwend.cpp:53 management/kmwend.cpp:112 +#: management/kxmlcommanddlg.cpp:142 management/kxmlcommanddlg.cpp:545 +msgid "Description" +msgstr "รายละเอียด" + +#: management/kxmlcommanddlg.cpp:150 +msgid "Add value" +msgstr "เพิ่มค่า" + +#: management/kxmlcommanddlg.cpp:151 +msgid "Delete value" +msgstr "ลบค่า" + +#: management/kxmlcommanddlg.cpp:153 +msgid "Apply changes" +msgstr "มีผลทันที" + +#: management/kxmlcommanddlg.cpp:154 +msgid "Add group" +msgstr "เพิ่มกลุ่ม" + +#: management/kxmlcommanddlg.cpp:155 +msgid "Add option" +msgstr "เพิ่มตัวเลือก" + +#: management/kxmlcommanddlg.cpp:156 +msgid "Delete item" +msgstr "ลบรายการ" + +#: management/kxmlcommanddlg.cpp:157 tdefilelist.cpp:135 +msgid "Move up" +msgstr "ย้ายขึ้น" + +#: management/kxmlcommanddlg.cpp:158 tdefilelist.cpp:142 +msgid "Move down" +msgstr "ย้ายลง" + +#: management/kxmlcommanddlg.cpp:162 +msgid "&Input From" +msgstr "นำเข้าจาก" + +#: management/kxmlcommanddlg.cpp:163 +msgid "O&utput To" +msgstr "ส่งออกไปยัง" + +#: management/kxmlcommanddlg.cpp:164 management/kxmlcommanddlg.cpp:166 +msgid "File:" +msgstr "เอกสาร:" + +#: management/kxmlcommanddlg.cpp:165 management/kxmlcommanddlg.cpp:167 +msgid "Pipe:" +msgstr "ไปป์:" + +#: kprintdialog.cpp:286 management/kxmlcommanddlg.cpp:176 +msgid "Comment:" +msgstr "คำอธิบาย:" + +#: management/kxmlcommanddlg.cpp:285 msgid "" -"Samba server
Adobe Windows PostScript driver files plus the CUPS " -"printer PPD will be exported to the [print$] " -"special share of the Samba server (to change the source CUPS server, use the " -"Samba username
User needs to have write access to the " -"[print$] share on the Samba server. [print$] " -"holds printer drivers prepared for download to Windows clients. This dialog " -"does not work for Samba servers configured with security = share " -"(but works fine with security = user)." +"A description string. This string is shown in the interface, and should be " +"explicit enough about the role of the corresponding option." msgstr "" -#: cups/cupsaddsmb2.cpp:96 +#: management/kxmlcommanddlg.cpp:293 msgid "" -"Samba password
The Samba setting encrypt passwords = yes " -"(default) requires prior use of smbpasswd -a [username] " -"command, to create an encrypted Samba password and have Samba recognize it." +"The type of the option. This determines how the option is presented graphically " +"to the user." msgstr "" -#: cups/cupsaddsmb2.cpp:267 -#, c-format -msgid "Creating folder %1" -msgstr "กำลังสร้างโฟลเดอร์ %1" +#: management/kxmlcommanddlg.cpp:297 +msgid "" +"The format of the option. This determines how the option is formatted for " +"inclusion in the global command line. The tag %value " +"can be used to represent the user selection. This tag will be replaced at " +"run-time by a string representation of the option value." +msgstr "" -#: cups/cupsaddsmb2.cpp:275 -#, c-format -msgid "Uploading %1" -msgstr "กำลังอัพโหลด %1" +#: management/kxmlcommanddlg.cpp:303 +msgid "" +"The default value of the option. For non persistent options, nothing is added " +"to the command line if the option has that default value. If this value does " +"not correspond to the actual default value of the underlying utility, make the " +"option persistent to avoid unwanted effects." +msgstr "" -#: cups/cupsaddsmb2.cpp:283 -#, c-format -msgid "Installing driver for %1" -msgstr "กำลังติดตั้งไดรเวอร์สำหรับ %1" +#: management/kxmlcommanddlg.cpp:309 +msgid "" +"Make the option persistent. A persistent option is always written to the " +"command line, whatever its value. This is useful when the chosen default value " +"does not match with the actual default value of the underlying utility." +msgstr "" -#: cups/cupsaddsmb2.cpp:291 +#: management/kxmlcommanddlg.cpp:313 #, c-format -msgid "Installing printer %1" -msgstr "กำลังติดตั้งเครื่องพิมพ์ %1" - -#: cups/cupsaddsmb2.cpp:333 -msgid "Driver successfully exported." -msgstr "ส่งออกไดรเวอร์เรียบร้อยแล้ว" - -#: cups/cupsaddsmb2.cpp:343 msgid "" -"Operation failed. Possible reasons are: permission denied or invalid Samba " -"configuration (see cupsaddsmb " -"manual page for detailed information, you need " -"CUPS version 1.1.11 or higher). You may want to try again with another " -"login/password." +"The full command line to execute the associated underlying utility. This " +"command line is based on a mechanism of tags that are replaced at run-time. The " +"supported tags are:" +"%1
" -msgstr "%1
" +#: management/kxmlcommanddlg.cpp:327 +#, c-format +msgid "" +"Output specification when the underlying utility writes output data to a file. " +"Use the tag %out to represent the output filename." +msgstr "" -#: cups/cupsaddsmb2.cpp:373 +#: management/kxmlcommanddlg.cpp:331 msgid "" -"You are about to prepare the %1 driver to be shared out to Windows " -"clients through Samba. This operation requires the " -"Adobe PostScript Driver, a recent version of Samba 2.2.x and a running SMB " -"service on the target server. Click Export to start the operation. Read " -"the cupsaddsmb manual page in Konqueror or type " -"man cupsaddsmb in a console window to learn more about this " -"functionality." +"Input specification when the underlying utility reads input data from its " +"standard input." msgstr "" -"คุณกำลังจะเตรียมไดรเวอร์ %1 เพื่อการใช้ร่วมกับไคลเอนต์วินโดว์สผ่านทาง " -"Samba ซึ่งปฏิบัติการนี้ ต้องการ " -"ไดรเวอร์โพสต์สคริปต์ของ Adobe, โปรแกรม Samba รุ่น 2.2.x และบริการ SMB " -"ที่กำลังทำงานอยู่บนเซิร์ฟเวอร์ คลิ้กที่ ส่งออก " -"เพื่อเริ่มปฏิบัติการ โปรดอ่านคู่มือ cupsaddsmb " -"ในคอนเควอร์เรอร์ หรือพิมพ์ man cupsaddsmb บนหน้าต่างคอนโซล " -"เพื่อศึกษาเกี่ยวกับความสามารถนี้เพิ่มเติม" -#: cups/cupsaddsmb2.cpp:393 +#: management/kxmlcommanddlg.cpp:335 msgid "" -"Some driver files are missing. You can get them on Adobe web site. See cupsaddsmb manual page for more details (you need " -"CUPS version 1.1.11 or higher)." +"Output specification when the underlying utility writes output data to its " +"standard output." msgstr "" -"ไม่มีเอกสารไดรเวอร์บางตัว คุณสามารถหามันได้ที่เว็บไซต์ Adobe ดูรายละเอียดที่หน้าคู่มือ cupsaddsmb (คุณต้องใช้ CUPS รุ่น 1.1.11 หรือสูงกว่า)" -#: cups/cupsaddsmb2.cpp:404 -#, c-format -msgid "Preparing to upload driver to host %1" -msgstr "กำลังเตรียมการอัพโหลดไดรเวอร์ไปยังโฮสต์ %1" +#: management/kxmlcommanddlg.cpp:339 +msgid "" +"A comment about the underlying utility, which can be viewed by the user from " +"the interface. This comment string supports basic HTML tags like <a>, " +"<b> or <i>." +msgstr "" -#: cups/cupsaddsmb2.cpp:409 management/networkscanner.cpp:149 -msgid "&Abort" -msgstr "ยกเลิก" +#: management/kxmlcommanddlg.cpp:568 +msgid "" +"Invalid identification name. Empty strings and \"__root__\" are not allowed." +msgstr "ชื่อที่แสดงตัวไม่ถูกต้อง ไม่อนุญาตให้ใช้ข้อความว่าง \"__root__\"" -#: cups/cupsaddsmb2.cpp:415 -msgid "The driver for printer %1 could not be found." -msgstr "ไม่พบไดรเวอร์สำหรับเครื่องพิมพ์ %1" +#: management/kxmlcommanddlg.cpp:649 management/kxmlcommanddlg.cpp:652 +msgid "New Group" +msgstr "กลุ่มใหม่" -#: cups/cupsaddsmb2.cpp:455 +#: management/kxmlcommanddlg.cpp:668 management/kxmlcommanddlg.cpp:671 +msgid "New Option" +msgstr "ตัวเลือกใหม่" + +#: management/kxmlcommanddlg.cpp:795 management/kxmlcommanddlg.cpp:939 #, c-format -msgid "Preparing to install driver on host %1" -msgstr "กำลังเตรียมการติดตั้งไดรเวอร์บนโฮสต์ %1" +msgid "Command Edit for %1" +msgstr "คำสั่งแก้ไขสำหรับ %1" -#: cups/kmwquota.cpp:46 -msgid "second(s)" -msgstr "วินาที" +#: management/kxmlcommanddlg.cpp:833 +msgid "&Mime Type Settings" +msgstr "ตั้งค่าประเภท &Mime" -#: cups/kmwquota.cpp:47 -msgid "minute(s)" -msgstr "นาที" +#: management/kxmlcommanddlg.cpp:839 +msgid "Supported &Input Formats" +msgstr "รูปแบบนำเข้าที่สนับสนุน" -#: cups/kmwquota.cpp:48 -msgid "hour(s)" -msgstr "ชั่วโมง" +#: kpfilterpage.cpp:407 management/kxmlcommanddlg.cpp:840 +msgid "Requirements" +msgstr "ความต้องการ" -#: cups/kmwquota.cpp:49 -msgid "day(s)" -msgstr "วัน" +#: management/kxmlcommanddlg.cpp:851 +msgid "&Edit Command..." +msgstr "แก้ไขคำสั่ง..." -#: cups/kmwquota.cpp:50 -msgid "week(s)" -msgstr "สัปดาห์" +#: management/kxmlcommanddlg.cpp:868 +msgid "Output &format:" +msgstr "รูปแบบส่งออก:" -#: cups/kmwquota.cpp:51 -msgid "month(s)" -msgstr "เดือน" +#: management/kxmlcommanddlg.cpp:870 +msgid "ID name:" +msgstr "ชื่อ ID:" -#: cups/kmwquota.cpp:79 -msgid "Printer Quota Settings" -msgstr "ตั้งค่าโควตาเครื่องพิมพ์" +#: management/kxmlcommanddlg.cpp:1033 +msgid "exec:/" +msgstr "exec:/" -#: cups/kmpropquota.cpp:78 cups/kmwquota.cpp:84 -msgid "No quota" -msgstr "ไม่มีโควตา" +#: management/kmdriverdbwidget.cpp:51 +msgid "&PostScript printer" +msgstr "เครื่องพิมพ์โพสต์สคริปต์" -#: cups/kmpropquota.cpp:79 cups/kmpropquota.cpp:80 cups/kmwquota.cpp:87 -#: cups/kmwquota.cpp:90 -msgid "None" -msgstr "ไม่มี" +#: management/kmdriverdbwidget.cpp:52 +msgid "&Raw printer (no driver needed)" +msgstr "เครื่องพิมพ์ธรรมดา (ไม่ต้องการไดรเวอร์)" -#: cups/kmpropquota.cpp:39 cups/kmwquota.cpp:96 -msgid "&Period:" -msgstr "ช่วง:" +#: management/kmdriverdbwidget.cpp:55 +msgid "&Other..." +msgstr "อื่น ๆ..." -#: cups/kmpropquota.cpp:40 cups/kmwquota.cpp:97 -msgid "&Size limit (KB):" -msgstr "จำกัดขนาด (KB):" +#: management/kmdriverdbwidget.cpp:56 +msgid "&Manufacturer:" +msgstr "ผู้ผลิต:" -#: cups/kmpropquota.cpp:41 cups/kmwquota.cpp:98 -msgid "&Page limit:" -msgstr "จำกัดหน้า:" +#: management/kmdriverdbwidget.cpp:57 +msgid "Mo&del:" +msgstr "รุ่น:" -#: cups/kmwquota.cpp:104 +#: management/kmdriverdbwidget.cpp:157 management/kmdriverdbwidget.cpp:166 +msgid "Loading..." +msgstr "กำลังโหลด..." + +#: management/kmdriverdbwidget.cpp:217 +msgid "Unable to find the PostScript driver." +msgstr "ไม่สามารถค้นหาไดรเวอร์โพสต์สคริปต์ได้" + +#: management/kmdriverdbwidget.cpp:230 +msgid "Select Driver" +msgstr "เลือกไดรเวอร์" + +#: management/kmdriverdbwidget.cpp:247 management/kmdriverdbwidget.cpp:249 +msgid "Set here the quota for this printer. Using limits of 0 "
-"means that no quota will be used. This is equivalent to set quota period to "
-"
Welcome,
" +"This wizard will help to install a new printer on your computer. It will " +"guide you through the various steps of the process of installing and " +"configuring a printer for your printing system. At each step, you can always go " +"back using the Back button.
" +"We hope you enjoy this tool!
" +"ตั้งค่าโควตาเครื่องพิมพ์ที่นี่ โดยการจำกัดโควตาที่ 0 "
-"หมายความว่า ไม่มีการใช้โควตา ซึ่งเหมือนกับการตั้งค่าช่วงของโควตาไปที่
ยินดีต้อนรับ
" +"ตัวช่วยเหลือนี้ จะช่วยในการติดตั้งเครื่องพิมพ์ใหม่สำหรับคอมพิวเตอร์ของคุณ " +"ซึ่งจะแนะนำขั้นตอนการติดตั้งและปรับแต่งเครื่องพิมพ์ทีละขั้นตอน " +"โดยคุณจะสามารถย้อนกลับในแต่ละขั้นตอนได้ โดยใช้ปุ่ม ย้อนกลับ
" +"เราหวังว่าคุณจะสนุกกับการใช้เครื่องมือนี้
" +"ทีมพัฒนาระบบการพิมพ์บน TDE
" -#: cups/kmwquota.cpp:130 -msgid "You must specify at least one quota limit." -msgstr "คุณต้องกำหนดการจำกัดโควตาอย่างน้อยหนึ่งโควตา" +#: management/kmlistview.cpp:125 +msgid "Print System" +msgstr "ระบบการพิมพ์" -#: cups/kmcupsconfigwidget.cpp:65 -msgid "Server Information" -msgstr "ข้อมูลเซิร์ฟเวอร์" +#: management/kmlistview.cpp:128 +msgid "Classes" +msgstr "คลาส" -#: cups/kmcupsconfigwidget.cpp:66 -msgid "Account Information" -msgstr "ข้อมูลบัญชีผู้ใช้" +#: management/kmlistview.cpp:131 +msgid "Printers" +msgstr "เครื่องพิมพ์" -#: cups/kmcupsconfigwidget.cpp:67 rlpr/kmproxywidget.cpp:34 -msgid "&Host:" -msgstr "โฮสต์:" +#: management/kmlistview.cpp:134 +msgid "Specials" +msgstr "พิเศษ" -#: cups/kmcupsconfigwidget.cpp:68 management/kmwsocketutil.cpp:53 -#: management/networkscanner.cpp:339 rlpr/kmproxywidget.cpp:35 -msgid "&Port:" -msgstr "พอร์ต:" +#: management/kmwlocal.cpp:38 +msgid "Local Port Selection" +msgstr "การเลือกพอร์ตภายใน" -#: cups/kmcupsconfigwidget.cpp:75 -msgid "&User:" -msgstr "ผู้ใช้:" +#: management/kmwlocal.cpp:50 +msgid "Local System" +msgstr "ภายในระบบ" -#: cups/kmcupsconfigwidget.cpp:76 -msgid "Pass&word:" -msgstr "รหัสผ่าน:" +#: management/kmwlocal.cpp:57 +msgid "Parallel" +msgstr "พอร์ตขนาน" -#: cups/kmcupsconfigwidget.cpp:79 -msgid "&Store password in configuration file" -msgstr "เก็บรหัสผ่านไว้ในเอกสารการปรับแต่ง" +#: management/kmwlocal.cpp:58 +msgid "Serial" +msgstr "พอร์ตอนุกรม" -#: cups/kmcupsconfigwidget.cpp:81 -msgid "Use &anonymous access" -msgstr "ใช้การติดต่อแบบผู้ใช้ไม่ระบุชื่อ" +#: management/kmwlocal.cpp:59 +msgid "USB" +msgstr "พอร์ต USB" -#: cups/kpschedulepage.cpp:40 +#: driver.cpp:389 management/kmwlocal.cpp:60 +msgid "Others" +msgstr "อื่น ๆ" + +#: management/kmwlocal.cpp:63 msgid "" -"Print Job Billing and Accounting
" -"Insert a meaningful string here to associate the current print job with a " -"certain account. This string will appear in the CUPS \"page_log\" to help with " -"the print accounting in your organization. (Leave it empty if you do not need " -"it.) " -"
It is useful for people who print on behalf of different \"customers\", " -"like print service bureaux, letter shops, press and prepress companies, or " -"secretaries who serve different bosses, etc.
" -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o job-billing=... # example: \"Marketing_Department\" or " -"\"Joe_Doe\"
Select a valid detected port, or enter directly the corresponding URI in the " +"bottom edit field.
" msgstr "" +"เลือกพอร์ตที่ตรวจพบตัวที่ถูกต้อง หรือใส่ตำแหน่ง URI โดยตรง " +"ในช่องกรอกข้อมูลด้านล่าง
" -#: cups/kpschedulepage.cpp:60 +#: management/kmwlocal.cpp:78 msgid "" -"Scheduled Printing
" -"Scheduled printing lets you control the time of the actual printout, while " -"you can still send away your job now and have it out of your way. " -"
Especially useful is the \"Never (hold indefinitely)\" option. It allows " -"you to park your job until a time when you (or a printer administrator) decides " -"to manually release it. " -"
This is often required in enterprise environments, where you normally are " -"not allowed to directly and immediately access the huge production printers in " -"your Central Repro Department. However it is okay to send jobs to the " -"queue which is under the control of the operators (who, after all, need to make " -"sure that the 10,000 sheets of pink paper which is required by the Marketing " -"Department for a particular job are available and loaded into the paper " -"trays).
" -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o job-hold-until=... # example: \"indefinite\" or \"no-hold\" " -"
Page Labels
" -"Page Labels are printed by CUPS at the top and bottom of each page. They " -"appear on the pages surrounded by a little frame box. " -"
They contain any string you type into the line edit field.
" -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o page-label=\"...\" # example: \"Company Confidential\"" -"
Job Priority
" -"Usually CUPS prints all jobs per queue according to the \"FIFO\" principle: " -"First In, First Out. " -"
The job priority option allows you to re-order the queue according to your " -"needs. " -"
It works in both directions: you can increase as well as decrease " -"priorities. (Usually you can only control your own jobs). " -"
Since the default job priority is \"50\", any job sent with, for example, " -"\"49\" will be printed only after all those others have finished. Conversely, a " -"\"51\" or higher priority job will go right to the top of a populated queue (if " -"no other, higher prioritized one is present).
" -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o job-priority=... # example: \"10\" or \"66\" or \"99\"" -"
Command objects perform a conversion from input to output."
+"
They are used as the basis to build both print filters and special "
+"printers. They are described by a command string, a set of options, a set of "
+"requirements and associated mime types. Here you can create new command objects "
+"and edit existing ones. All changes will only be effective for you."
+msgstr ""
+"
ออบเจ็กต์คำสั่งจำทำการแปลงจากส่วนนำเข้าไปเป็นส่วนส่งออก"
+"
และถูกใช้เป็นพื้นฐานการสร้างทั้งตัวกรองการพิมพ์และเครื่องพิมพ์แบบพิเศษ "
+"ซึ่งมันอธิบายได้จากข้อความคำสั่ง ชุดของตัวเลือก ชุดของความต้องการ และ ประเภท "
+"mime ที่สนับสนุน โดยคุณสามารถสร้างออบเจ็กต์คำสั่งใหม่ "
+"และแก้ไขคำสั่งที่มีอยู่แล้วได้ที่นี่ ซึ่งการเปลี่ยนแปลงทั้งหมด "
+"จะมีผลเฉพาะกับคุณเท่านั้น"
-#: cups/kpschedulepage.cpp:140
-msgid "Evening (6 pm - 6 am)"
-msgstr "กลางคืน (6 โมงเย็น - 6 โมงเช้า)"
+#: management/kmwclass.cpp:37
+msgid "Class Composition"
+msgstr "รายการคลาส"
-#: cups/kpschedulepage.cpp:141
-msgid "Night (6 pm - 6 am)"
-msgstr "กลางคืน (6 โมงเย็น - 6 โมงเช้า)"
+#: management/kmwclass.cpp:52
+msgid "Available printers:"
+msgstr "เครื่องพิมพ์ที่มีอยู่:"
-#: cups/kpschedulepage.cpp:142
-msgid "Weekend"
-msgstr "สุดสัปดาห์"
+#: management/kmwclass.cpp:53
+msgid "Class printers:"
+msgstr "คลาสเครื่องพิมพ์:"
-#: cups/kpschedulepage.cpp:143
-msgid "Second Shift (4 pm - 12 am)"
-msgstr "ช่วงที่สอง (บ่ายสี่โมงถึงเที่ยงคืน)"
+#: management/kmwclass.cpp:79
+msgid "You must select at least one printer."
+msgstr "คุณต้องเลือกเครื่องพิมพ์อย่างน้อยหนึ่งเครื่อง"
-#: cups/kpschedulepage.cpp:144
-msgid "Third Shift (12 am - 8 am)"
-msgstr "ช่วงที่สาม (เที่ยงคืน - 8 โมงเช้า)"
+#: management/kmconfigfilter.cpp:40
+msgid "Filter"
+msgstr "ตัวกรอง"
-#: cups/kpschedulepage.cpp:145
-msgid "Specified Time"
-msgstr "เวลาที่กำหนด"
+#: management/kmconfigfilter.cpp:41
+msgid "Printer Filtering Settings"
+msgstr "ตั้งค่าการกรองเครื่องพิมพ์"
-#: cups/kpschedulepage.cpp:160
-msgid "&Scheduled printing:"
-msgstr "ตารางงานพิมพ์:"
+#: management/kmconfigfilter.cpp:44
+msgid "Printer Filter"
+msgstr "ตัวกรองเครื่องพิมพ์"
-#: cups/kpschedulepage.cpp:163
-msgid "&Billing information:"
-msgstr "ข้อมูลค่าใช้จ่าย:"
+#: management/kmconfigfilter.cpp:56
+msgid ""
+"The printer filtering allows you to view only a specific set of printers "
+"instead of all of them. This may be useful when there are a lot of printers "
+"available but you only use a few ones. Select the printers you want to see from "
+"the list on the left or enter a Location filter (ex: Group_1*). Both are "
+"cumulative and ignored if empty."
+msgstr ""
+"ตัวกรองของเครื่องพิมพ์อนุญาตให้คุณได้แสดงผลเฉพาะกับเครื่องพิมพ์ที่ระบุ "
+"แทนการแสดงจากทั้งหมดที่มี ซึ่งมักในกรณีที่มีเครื่องพิมพ์มาก "
+"แต่คุณมักใช้อยู่ไม่กี่เครื่อง "
+"ให้เลือกเครื่องพิมพ์ที่คุณต้องการจะเห็นจากรายการด้านซ้ายมือ หรือเติม "
+"ตำแหน่ง ของตัวกรอง (เช่น: Group_1*) (หากปล่อยว่างไว้จะไม่สนใจ)"
-#: cups/kpschedulepage.cpp:166
-msgid "T&op/Bottom page label:"
-msgstr "แถบข้อความด้านบน/ล่างของหน้า:"
+#: management/kmconfigfilter.cpp:62
+msgid "Location filter:"
+msgstr "ตำแหน่งตัวกรอง:"
-#: cups/kpschedulepage.cpp:169
-msgid "&Job priority:"
-msgstr "ความสำคัญของงาน:"
+#: management/kmmainview.cpp:72
+msgid ""
+"The printer %1 already exists. Continuing will overwrite existing printer. Do "
+"you want to continue?"
+msgstr ""
+"มีเครื่องพิมพ์ %1 อยู่แล้ว หากทำต่อไปจะเป็นเขียนทับเครื่องพิมพ์นี้"
+"
คุณต้องการทำต่อไปหรือไม่ ?"
-#: cups/kpschedulepage.cpp:200
-msgid "The time specified is not valid."
-msgstr "เวลาที่กำหนดไม่ถูกต้อง"
+#: management/kmmainview.cpp:133 management/kmmainview.cpp:783
+#: management/kmmainview.cpp:859 management/kmmainview.cpp:883
+msgid "Initializing manager..."
+msgstr "เริ่มการเรียกใช้ตัวจัดการ..."
-#: cups/kmpropquota.cpp:57
-msgid "Quotas"
-msgstr "โควตา"
+#: management/kmmainview.cpp:180
+msgid "&Icons,&List,&Tree"
+msgstr "ไอคอน, ชุดรายการ, รายการต้นไม้ี"
-#: cups/kmpropquota.cpp:58
-msgid "Quota Settings"
-msgstr "ตั้งค่าโควตา"
+#: management/kmmainview.cpp:184
+msgid "Start/Stop Printer"
+msgstr "เริ่ม/หยุดเครื่องพิมพ์"
-#: cups/ippreportdlg.cpp:34
-msgid "IPP Report"
-msgstr "รายงาน IPP"
+#: management/kmmainview.cpp:186
+msgid "&Start Printer"
+msgstr "เริ่มเครื่องพิมพ์"
-#: cups/ippreportdlg.cpp:93
-msgid "Internal error: unable to generate HTML report."
-msgstr "ข้อผิดพลาดภายใน: ไม่สามารถสร้างรายงาน HTML ได้"
+#: management/kmmainview.cpp:187
+msgid "Sto&p Printer"
+msgstr "หยุดเครื่องพิมพ์"
-#: cups/kmcupsmanager.cpp:819
-msgid "Library cupsdconf not found. Check your installation."
-msgstr "ไม่พบไลบรารี cupsdconf โปรดตรวจสอบการติดตั้ง"
+#: management/kmmainview.cpp:189
+msgid "Enable/Disable Job Spooling"
+msgstr "เปิด/ปิด การใช้งานที่พักข้อมูลการพิมพ์"
-#: cups/kmcupsmanager.cpp:825
-msgid "Symbol %1 not found in cupsdconf library."
-msgstr "ไม่พบสัญลักษณ์ %1 ในไลบรารี cupsdconf"
+#: management/kmmainview.cpp:191
+msgid "&Enable Job Spooling"
+msgstr "เปิดการใช้งานที่พักข้อมูลงานพิมพ์"
-#: cups/kmcupsmanager.cpp:920
-msgid "&Export Driver..."
-msgstr "ส่งออกไดรเวอร์..."
+#: management/kmmainview.cpp:192
+msgid "&Disable Job Spooling"
+msgstr "ปิดการใช้งานที่พักข้อมูลงานพิมพ์"
-#: cups/kmcupsmanager.cpp:922
-msgid "&Printer IPP Report"
-msgstr "รายงานเครื่องพิมพ์ IPP"
+#: management/kmmainview.cpp:195
+msgid "&Configure..."
+msgstr "ปรับแต่ง..."
-#: cups/kmcupsmanager.cpp:968 cups/kmwippprinter.cpp:218
-#, c-format
-msgid "IPP Report for %1"
-msgstr "รายงาน IPP สำหรับ %1"
+#: management/kmmainview.cpp:196
+msgid "Add &Printer/Class..."
+msgstr "เพิ่มเครื่องพิมพ์/คลาส..."
-#: cups/kmcupsmanager.cpp:972
-msgid "Unable to retrieve printer information. Error received:"
-msgstr "ไม่สามารถรับค่าข้อมูลงานพิมพ์ได้:"
+#: management/kmmainview.cpp:197
+msgid "Add &Special (pseudo) Printer..."
+msgstr "เพิ่มเครื่องพิมพ์พิเศษ..."
-#: cups/kmcupsmanager.cpp:985
-msgid "Server"
-msgstr "เซิร์ฟเวอร์"
+#: management/kmmainview.cpp:198
+msgid "Set as &Local Default"
+msgstr "ปรับให้เป็นค่าปริยายของระบบ"
-#: cups/kmcupsmanager.cpp:1025
-#, c-format
-msgid ""
-"Connection to CUPS server failed. Check that the CUPS server is correctly "
-"installed and running. Error: %1."
-msgstr ""
-"การเชื่อมต่อไปยังเซิร์ฟเวอร์ CUPS ล้มเหลว โปรดตรวจสอบว่า เซิร์ฟเวอร์ CUPS "
-"ได้ถูกติดตั้งไว้อย่างถูกต้องแล้ว และกำลังทำงานอยู่ ข้อผิดพลาดคือ: %1"
+#: management/kmmainview.cpp:199
+msgid "Set as &User Default"
+msgstr "ปรับให้เป็นค่าปริยายของผู้ใช้"
-#: cups/kmcupsmanager.cpp:1026
-msgid "the IPP request failed for an unknown reason"
-msgstr "ล้มเหลวในการร้องขอ IPP โดยไม่ทราบเหตุผล"
+#: management/kmmainview.cpp:200
+msgid "&Test Printer..."
+msgstr "ทดสอบเครื่องพิมพ์..."
-#: cups/kmcupsmanager.cpp:1060
-msgid "connection refused"
-msgstr "ถูกปฏิเสธการเชื่อมต่อ"
+#: management/kmmainview.cpp:201
+msgid "Configure &Manager..."
+msgstr "ปรับแต่งตัวจัดการ..."
-#: cups/kmcupsmanager.cpp:1063
-msgid "host not found"
-msgstr "ไม่พบโฮสต์"
+#: management/kmmainview.cpp:202
+msgid "Initialize Manager/&View"
+msgstr "เริ่มตัวจัดการ/แสดงผล"
-#: cups/kmcupsmanager.cpp:1067
-msgid "read failed (%1)"
-msgstr "อ่านล้มเหลว (%1)"
+#: management/kmmainview.cpp:204
+msgid "&Orientation"
+msgstr "ทิศทางการจัดวาง"
-#: cups/kmcupsmanager.cpp:1071
-msgid ""
-"Connection to CUPS server failed. Check that the CUPS server is correctly "
-"installed and running. Error: %2: %1."
-msgstr ""
-"การเชื่อมต่อไปยังเซิร์ฟเวอร์ CUPS ล้มเหลว โปรดตรวจสอบว่า เซิร์ฟเวอร์ CUPS "
-"ได้ถูกติดตั้งไว้อย่างถูกต้อง และกำลังทำงานอยู่ ข้อผิดพลาดคือ: %2 :%1"
+#: management/kmmainview.cpp:207
+msgid "&Vertical,&Horizontal"
+msgstr "แนวตั้ง, แนวนอน"
-#: cups/ipprequest.cpp:164
-msgid "You don't have access to the requested resource."
-msgstr "คุณไม่ได้รับอนุญาตให้ใช้งานทรัพยากรที่ร้องขอไป"
+#: management/kmmainview.cpp:211
+msgid "R&estart Server"
+msgstr "เริ่มการทำงานเซิร์ฟเวอร์ใหม่"
-#: cups/ipprequest.cpp:167
-msgid "You are not authorized to access the requested resource."
-msgstr "คุณยังไม่ได้รับสิทธิ์ในการเข้าใช้ทรัพยากรที่ร้องขอไป"
+#: management/kmmainview.cpp:212
+msgid "Configure &Server..."
+msgstr "ปรับแต่งเซิร์ฟเวอร์..."
-#: cups/ipprequest.cpp:170
-msgid "The requested operation cannot be completed."
-msgstr "ไม่สามารถทำปฏิบัติการที่ร้องขอมาให้สำเร็จได้"
+#: management/kmmainview.cpp:213
+#, fuzzy
+msgid "Configure Server Access..."
+msgstr "ปรับแต่งเซิร์ฟเวอร์..."
-#: cups/ipprequest.cpp:173
-msgid "The requested service is currently unavailable."
-msgstr "ยังไม่สนับสนุนบริการที่ร้องขอในตอนนี้"
+#: management/kmmainview.cpp:216
+msgid "Hide &Toolbar"
+msgstr "ซ่อนแถบเครื่องมือ"
-#: cups/ipprequest.cpp:176
-msgid "The target printer is not accepting print jobs."
-msgstr "เครื่องพิมพ์ปลายทางไม่ยอมรับงานพิมพ์"
+#: management/kmmainview.cpp:218
+msgid "Show Me&nu Toolbar"
+msgstr "แสดงแถบเครื่องมือเมนู"
-#: cups/ipprequest.cpp:313
-msgid ""
-"Connection to CUPS server failed. Check that the CUPS server is correctly "
-"installed and running."
-msgstr ""
-"การเชื่อมต่อไปยังเซิร์ฟเวอร์ CUPS ล้มเหลว โปรดตรวจสอบว่าเซิร์ฟเวอร์ CUPS "
-"ได้ถูกติดตั้งไว้อย่างถูกต้องและกำลังทำงานอยู่"
+#: management/kmmainview.cpp:219
+msgid "Hide Me&nu Toolbar"
+msgstr "ซ่อนแถบเครื่องมือเมนู"
-#: cups/ipprequest.cpp:316
-msgid "The IPP request failed for an unknown reason."
-msgstr "การร้องขอ IPP ล้มเหลวโดยไม่ทราบสาเหตุ"
+#: management/kmmainview.cpp:221
+msgid "Show Pr&inter Details"
+msgstr "แสดงรายละเอียดเครื่องพิมพ์"
-#: cups/ipprequest.cpp:461
-msgid "Attribute"
-msgstr "แอตทริบิวต์"
+#: management/kmmainview.cpp:222
+msgid "Hide Pr&inter Details"
+msgstr "ซ่อนรายละเอียดเครื่องพิมพ์"
-#: cups/ipprequest.cpp:462
-msgid "Values"
-msgstr "ค่า"
+#: management/kmmainview.cpp:226
+msgid "Toggle Printer &Filtering"
+msgstr "เปิด/ปิดการใช้งานตัวกรองเครื่องพิมพ์"
-#: cups/ipprequest.cpp:500 cups/ipprequest.cpp:567
-msgid "True"
-msgstr "จริง"
+#: management/kmmainview.cpp:230
+msgid "Pri&nter Tools"
+msgstr "เครื่องมือเครื่องพิมพ์"
-#: cups/ipprequest.cpp:500 cups/ipprequest.cpp:567
-msgid "False"
-msgstr "เท็จ"
+#: management/kmmainview.cpp:295
+msgid "Print Server"
+msgstr "เซิร์ฟเวอร์การพิมพ์"
-#: cups/kmwippprinter.cpp:45
-msgid "IPP Printer Information"
-msgstr "ข้อมูลเครื่องพิมพ์แบบ IPP"
+#: management/kmmainview.cpp:301
+msgid "Print Manager"
+msgstr "เครื่องมือจัดการงานพิมพ์"
-#: cups/kmwippprinter.cpp:55
-msgid "&Printer URI:"
-msgstr "ตำแหน่ง URI เครื่องพิมพ์:"
+#: management/kmmainview.cpp:334
+msgid "An error occurred while retrieving the printer list."
+msgstr "เกิดความผิดพลาดในระหว่างการรับรายการเครื่องพิมพ์"
-#: cups/kmwippprinter.cpp:64
-msgid ""
-"
Either enter the printer URI directly, or use the network scanning " -"facility.
" -msgstr "" -"คุณอาจใส่ทั้ง URI เครื่องพิมพ์โดยตรง หรืออาจใช้การค้นหาจากเครือข่ายก็ได้
" +#: management/kmmainview.cpp:511 +#, c-format +msgid "Unable to modify the state of printer %1." +msgstr "ไม่สามารถแก้ไขสถานะเครื่องพิมพ์ %1 ได้" -#: cups/kmwippprinter.cpp:65 -msgid "&IPP Report" -msgstr "รายงาน IPP" +#: management/kmmainview.cpp:522 +msgid "Do you really want to remove %1?" +msgstr "คุณต้องการลบ %1 จริงหรือไม่ ?" -#: cups/kmwippprinter.cpp:112 -msgid "You must enter a printer URI." -msgstr "คุณต้องใส่ URI ของเครื่องพิมพ์ก่อน" +#: management/kmmainview.cpp:526 +#, c-format +msgid "Unable to remove special printer %1." +msgstr "ไม่สามารถลบเครื่องพิมพ์พิเศษ %1 ได้" -#: cups/kmwippprinter.cpp:119 management/kmwsocket.cpp:117 -msgid "No printer found at this address/port." -msgstr "ไม่พบเครื่องพิมพ์ที่ตำแหน่งและพอร์ตนี้" +#: management/kmmainview.cpp:529 +#, c-format +msgid "Unable to remove printer %1." +msgstr "ไม่สามารถลบเครื่องพิมพ์ %1 ได้" -#: cups/kmwippprinter.cpp:139 management/kmwsocket.cpp:136 -msgid "" -"_: Unknown host - 1 is the IP\n" -"%1
" +msgstr "ได้รับข้อความผิดพลาดจากตัวจัดการ:%1
" -#: cups/kmwippprinter.cpp:199 -#, c-format -msgid "Unable to retrieve printer info. Printer answered:Enter the URI corresponding to the printer to be installed. Examples:
" -"เติม URI ที่ชี้ไปยังตำแหน่งที่เครื่องพิมพ์ได้ติดตั้งอยู่ ตัวอย่าง:
" -"Brightness: Slider to control the brightness value of all colors " -"used.
" -"The brightness value can range from 0 to 200. Values greater than 100 will " -"lighten the print. Values less than 100 will darken the print.
" -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o brightness=... # use range from \"0\" to \"200\"" -"
Hue (Tint): Slider to control the hue value for color rotation.
" -"The hue value is a number from -360 to 360 and represents the color hue " -"rotation. The following table summarizes the change you will see for the base " -"colors: " -"
Original | " -"hue=-45 | " -"hue=45 |
---|---|---|
Red | " -"Purple | " -"Yellow-orange |
Green | " -"Yellow-green | " -"Blue-green |
Yellow | " -"Orange | " -"Green-yellow |
Blue | " -"Sky-blue | " -"Purple |
Magenta | " -"Indigo | " -"Crimson |
Cyan | " -"Blue-green | " -"Light-navy-blue |
Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o hue=... # use range from \"-360\" to \"360\"
Saturation: Slider to control the saturation value for all colors " -"used.
" -"The saturation value adjusts the saturation of the colors in an image, " -"similar to the color knob on your television. The color saturation value.can " -"range from 0 to 200. On inkjet printers, a higher saturation value uses more " -"ink. On laserjet printers, a higher saturation uses more toner. A color " -"saturation of 0 produces a black-and-white print, while a value of 200 will " -"make the colors extremely intense.
" -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o saturation=... # use range from \"0\" to \"200\"" -"
Gamma: Slider to control the gamma value for color correction.
" -"The gamma value can range from 1 to 3000. A gamma values greater than 1000 " -"lightens the print. A gamma value less than 1000 darken the print. The default " -"gamma is 1000.
" -"Note:
the gamma value adjustment is not visible in the thumbnail " -"preview. " -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o gamma=... # use range from \"1\" to \"3000\"" -"
Image Printing Options
" -"All options controlled on this page only apply to printing images. Most " -"image file formats are supported. To name a few: JPEG, TIFF, PNG, GIF, PNM " -"(PBM/PGM/PNM/PPM), Sun Raster, SGI RGB, Windows BMP. Options to influence color " -"output of image printouts are: " -"
For a more detailed explanation about Brightness, Hue, Saturation and Gamma " -"settings, please look at the 'WhatsThis' items provided for these controls. " -"
Coloration Preview Thumbnail
" -"The coloration preview thumbnail indicates change of image coloration by " -"different settings. Options to influence output are: " -"
For a more detailed explanation about Brightness, Hue, Saturation and Gamma " -"settings, please look at the 'WhatsThis' items provided for these controls. " -"
Image Size: Dropdown menu to control the image size on the printed " -"paper. Dropdown works in conjunction with slider below. Dropdown options " -"are:.
" -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o natural-scaling=... # range in % is 1....800 " -"" -"
-o scaling=... # range in % is 1....800 " -"
-o ppi=... # range in ppi is 1...1200
Position Preview Thumbnail
" -"This position preview thumbnail indicates the position of the image on the " -"paper sheet. " -"
Click on horizontal and vertical radio buttons to move image alignment on " -"paper around. Options are: " -"
Reset to Default Values
" -"Reset all coloration settings to default values. Default values are: " -"
Image Positioning:
" -"Select a pair of radiobuttons to move image to the position you want on the " -"paper printout. Default is 'center'.
" -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o position=... # examples: \"top-left\" or \"bottom\"" -"
Enter the information concerning the remote IPP server owning the targeted " -"printer. This wizard will poll the server before continuing.
" +"These options will automatically put fonts in the PostScript file which are not " +"present on the printer. Font embedding usually produces better print results " +"(closer to what you see on the screen), but larger print data as well." msgstr "" -"ใส่ข้อมูลรายละเอียดของเซิร์ฟเวอร์ IPP ที่เป็นเจ้าของเครื่องพิมพ์ " -"ซึ่งเครื่องมือช่วยเหลือนี้ จะสอบถามเซิร์ฟเวอร์ก่อนจะทำต่อไป
" +"ตัวเลือกนี้ " +"จะทำการเพิ่มแฟ้มแบบอักษรที่ไม่มีอยู่บนเครื่องพิมพ์เข้าไปในเอกสารโพสต์คริปต์ด้วย " +"ซึ่งการฝังแฟ้มแบบวอักษรเข้าไปด้วยนี้จะทำให้งานพิมพ์มีคุณภาพท่ดีกว่า " +"แต่ก็จะทำให้ข้อมูลงานพิม์มีขนาใหญ่ตขึ้นเช่นกัน" -#: cups/kmwipp.cpp:42 management/kmwlpd.cpp:46 rlpr/kmproprlpr.cpp:34 -#: rlpr/kmwrlpr.cpp:62 -msgid "Host:" -msgstr "โฮสต์:" +#: management/kmconfigfonts.cpp:89 +msgid "" +"When using font embedding you can select additional directories where TDE " +"should search for embeddable font files. By default, the X server font path is " +"used, so adding those directories is not needed. The default search path should " +"be sufficient in most cases." +msgstr "" +"หากมีการใช้การฝังแฟ้มแบบอักษรในเอกสาร คุณจะสามารถเลือกไดเรกทอรีเพิ่มเติม " +"สำหรับให้ TDE ค้นหาแฟ้มแบบอักษรสำหรับใช้งาน " +"ซึ่งโดยปริยายแล้วจะใช้พาธแบบอักษรของเซิร์ฟเวอร์ X " +"ซึ่งเพียงพอต่อการใช้งานอยู่แล้ว " +"ดังนั้นการเพิ่มเส้นทางค้นหาก็ไม่จำเป็นแต่อย่างใด" -#: cups/kmwipp.cpp:43 -msgid "Port:" -msgstr "พอร์ต:" +#: management/networkscanner.cpp:104 management/networkscanner.cpp:184 +msgid "Sc&an" +msgstr "ค้นหา" -#: cups/kmwipp.cpp:52 management/kmwsmb.cpp:79 -msgid "Empty server name." -msgstr "ไม่มีชื่อเซิร์ฟเวอร์" +#: management/networkscanner.cpp:111 +msgid "Network scan:" +msgstr "ค้นหาเครือข่าย:" -#: cups/kmwipp.cpp:59 -msgid "Incorrect port number." -msgstr "หมายเลขพอร์ตไม่ถูกต้อง" +#: management/networkscanner.cpp:112 management/networkscanner.cpp:299 +#: management/networkscanner.cpp:310 +#, c-format +msgid "Subnet: %1" +msgstr "ซับเน็ต: %1" -#: cups/kmwipp.cpp:72 -msgid "Additional Tags
You may send additional commands to the CUPS " -"server via this editable list. There are 3 purposes for this: " -"Standard CUPS job options: A complete list of standard CUPS job " -"options is in the CUPS User Manual" -". Mappings of the kprinter user interface widgets to respective CUPS job " -"option names are named in the various WhatsThis help items..
" -"Custom CUPS job options: CUPS print servers may be customized with " -"additional print filters and backends which understand custom job options. You " -"can specify such custom job options here. If in doubt, ask your system " -"administrator..
" -"" -"
Operator Messages: You may send additional messages to the " -"operator(s) of your production printers (e.g. in your " -"Central Repro Department
) Messages can be read by the operator(s) (or " -"yourself) by viewing the \"Job IPP Report\" for the job. " -"Examples:" -"A standard CUPS job option:" -"" -"
(Name) number-up -- (Value) 9 " -"
" -"
A job option for custom CUPS filters or backends:" -"
(Name) DANKA_watermark -- " -"(Value) Company_Confidential " -"
" -"
A message to the operator(s):" -"
(Name) Deliver_after_completion -- " -"(Value) to_Marketing_Departm." -"
Note: the fields must not include spaces, tabs or quotes. You may " -"need to double-click on a field to edit it. " -"
Warning: Do not use such standard CUPS option names which also can be " -"used through the TDEPrint GUI. Results may be unpredictable if they conflict, " -" or if they are sent multiple times. For all options supported by the GUI, " -"please do use the GUI. (Each GUI element's 'WhatsThis' names the related CUPS " -"option name.)
Select the default banners associated with this printer. These banners will " -"be inserted before and/or after each print job sent to the printer. If you " -"don't want to use banners, select No Banner.
" +"You can't remove the default instance. However all settings of %1 will be " +"discarded. Continue?" msgstr "" -"เลือกแบนเนอร์โดยปริยายที่กำหนดให้ใช้กับเครื่องพิมพ์นี้ แบนเนอร์นี้ " -"จะถูกแทรกก่อน และ/หรือ หลังจากแต่ละงานพิมพ์ ถูกส่งให้เครื่องพิมพ์แล้ว " -"ถ้าคุณไม่ต้องการใช้แบนเนอร์ ให้เลือก ไม่มีแบนเนอร์
" - -#: cups/kmwfax.cpp:39 -msgid "Fax Serial Device" -msgstr "อุปกรณ์โทรสารแบบอนุกรม" - -#: cups/kmwfax.cpp:43 -msgid "Select the device which your serial Fax/Modem is connected to.
" -msgstr "เลือกอุปกรณ์อนุกรม โทรสาร/โมเด็ม ของคุณที่เชื่อมต่ออยู่
" +"คุณไม่สามารถลบอินสแตนซ์ปริยายได้ อย่างไรก็ตาม การตั้งค่าทั้งหมดของ %1 " +"จะถูกยกเลิก ต้องการทำต่อไปหรือไม่ ?" -#: cups/kmwfax.cpp:81 -msgid "You must select a device." -msgstr "คุณต้องเลือกอุปกรณ์ก่อน" +#: management/kminstancepage.cpp:213 +#, c-format +msgid "Unable to find instance %1." +msgstr "ไม่สามารถค้นหาอินสแตนซ์ %1 ได้" -#: foomatic/kfoomaticprinterimpl.cpp:51 lpdunix/klpdunixprinterimpl.cpp:72 +#: management/kminstancepage.cpp:215 +#, c-format msgid "" -"No valid print executable was found in your path. Check your installation." -msgstr "ไม่มีตัวประมวลผลที่ถูกต้องในพาธ โปรดตรวจสอบการติดตั้ง" - -#: foomatic/kmfoomaticmanager.cpp:70 -msgid "This is not a Foomatic printer" -msgstr "นี่ไม่ใช่เครื่องพิมพ์แบบ Foomatic" +"Unable to retrieve printer information. Message from printing system: %1." +msgstr "" +"ไม่สามารถรับค่าข้อมูลงานพิมพ์ได้ โดยได้รับการแจ้งจากระบบการพิมพ์ว่า: %1" -#: foomatic/kmfoomaticmanager.cpp:75 -msgid "Some printer information are missing" -msgstr "ไม่มีข้อมูลบางส่วนของเครื่องพิมพ์ !" +#: management/kminstancepage.cpp:232 +msgid "The instance name is empty. Please select an instance." +msgstr "ยังไม่ได้กรอกชื่ออินสแตนซ์ โปรดเลือกตัวใดตัวหนึ่ง" -#: kmmanager.cpp:70 -msgid "This operation is not implemented." -msgstr "ปฏิบัติการนี้ยังไม่ได้ถูกกำหนดมาก่อน" +#: management/kminstancepage.cpp:264 +msgid "Internal error: printer not found." +msgstr "ข้อผิดพลาดภายใน: ไม่พบเครื่องพิมพ์" -#: kmmanager.cpp:169 -msgid "Unable to locate test page." -msgstr "ไม่สามารถหาหน้าทดสอบการพิมพ์ได้" +#: management/kminstancepage.cpp:268 +#, c-format +msgid "Unable to send test page to %1." +msgstr "ไม่สามารถส่งหน้าทดสอบการพิมพ์ไปยัง %1 ได้" -#: kmmanager.cpp:449 -msgid "Can't overwrite regular printer with special printer settings." -msgstr "ไม่สามารถเขียนทับเครื่องพิมพ์ปกติ ด้วยการปรับค่าของเครื่องพิมพ์พิเศษ" +#: management/kmpropcontainer.cpp:35 +msgid "Change..." +msgstr "เปลี่ยน..." -#: kmmanager.cpp:478 -#, c-format -msgid "Parallel Port #%1" -msgstr "พอร์ตขนาน #%1" +#: management/kmpropbackend.cpp:34 +msgid "Printer type:" +msgstr "ประเภทเครื่องพิมพ์:" -#: kmmanager.cpp:486 kmmanager.cpp:502 kxmlcommand.cpp:661 -#, c-format -msgid "Unable to load TDE print management library: %1" -msgstr "ไม่สามารถเรียกไลบรารีการจัดการการพิมพ์ของ TDE: %1 ได้" +#: management/kmpropbackend.cpp:48 +msgid "Interface" +msgstr "รูปแบบการเชื่อมต่อ" -#: kmmanager.cpp:491 kxmlcommand.cpp:669 -msgid "Unable to find wizard object in management library." -msgstr "ไม่สามารถค้นหาออบเจ็กต์วิซาร์ดในไลบรารีการจัดการได้" +#: management/kmpropbackend.cpp:49 +msgid "Interface Settings" +msgstr "ตั้งค่ารูปแบบการเชื่อมต่อ" -#: kmmanager.cpp:507 -msgid "Unable to find options dialog in management library." -msgstr "ไม่สามารถค้นหาออบเจ็กต์วิซาร์ดในไลบรารีการจัดการได้" +#: management/kmpropbackend.cpp:62 +msgid "IPP Printer" +msgstr "เครื่องพิมพ์ IPP" -#: kmmanager.cpp:534 -msgid "No plugin information available" -msgstr "ไม่มีข้อมูลของปลั๊กอิน" +#: management/kmpropbackend.cpp:63 +msgid "Local USB Printer" +msgstr "เครื่องพิมพ์ต่อตรงแบบ USB" -#: kprintpreview.cpp:140 -msgid "Do you want to continue printing anyway?" -msgstr "คุณต้องการจะทำการพิมพ์ต่อไปหรือไม่ ?" +#: management/kmpropbackend.cpp:64 +msgid "Local Parallel Printer" +msgstr "เครื่องพิมพ์ต่อตรงแบบพอร์ตขนาน" -#: kprintpreview.cpp:148 kprintpreview.cpp:227 -msgid "Print Preview" -msgstr "แสดงภาพก่อนพิมพ์" +#: management/kmpropbackend.cpp:65 +msgid "Local Serial Printer" +msgstr "เครื่องพิมพ์ต่อตรงแบบอนุกรม" -#: kprintpreview.cpp:278 -msgid "" -"The preview program %1 cannot be found. Check that the program is correctly " -"installed and located in a directory included in your PATH environment " -"variable." -msgstr "" -"ไม่พบโปรแกรมแสดงภาพก่อนพิมพ์ %1 โปรดตรวจสอบว่า โปรแกรมดังกล่าว ได้ถูกติดตั้ง " -"และอยู่ในเส้นทางของพาธในตัวแปรแวดล้อม PATH ของระบบคุณแล้ว" +#: management/kmpropbackend.cpp:66 +msgid "Network Printer (socket)" +msgstr "เครื่องพิมพ์เครือข่าย (ผ่านซ็อกเกต)" -#: kprintpreview.cpp:303 -msgid "" -"Preview failed: neither the internal TDE PostScript viewer (KGhostView) nor any " -"other external PostScript viewer could be found." -msgstr "" -"การแสดงภาพก่อนพิมพ์ล้มเหลว: อาจจะเนื่องจาก ไม่พบตัวแสดงโพสต์สคริปต์ภายในของ TDE " -"(KGhostView) หรือตัวแสดงโพสต์สคริปต์ภายนอกอื่น ๆ" +#: management/kmpropbackend.cpp:67 +msgid "SMB printers (Windows)" +msgstr "เครื่องพิมพ์แบบ SMB (วินโดว์ส)" -#: kprintpreview.cpp:307 -#, c-format -msgid "" -"Preview failed: TDE could not find any application to preview files of type %1." -msgstr "" +#: lpd/kmlpduimanager.cpp:45 management/kmpropbackend.cpp:68 +#: rlpr/kmwrlpr.cpp:116 +msgid "Remote LPD queue" +msgstr "เครื่องพิมพ์ LPD ระยะไกล" -#: kprintpreview.cpp:317 -#, c-format -msgid "Preview failed: unable to start program %1." -msgstr "การแสดงตัวอย่างล้มเหลว: ไม่สามารถเริ่มการทำงานโปรแกรม %1 ได้" +#: management/kmpropbackend.cpp:69 +msgid "File printer" +msgstr "เครื่องพิมพ์แบบพิมพ์ลงเอกสาร" -#: kprintpreview.cpp:322 -msgid "Do you want to continue printing?" -msgstr "คุณต้องการจะทำการพิมพ์ต่อไปหรือไม่ ?" +#: management/kmpropbackend.cpp:70 +msgid "Serial Fax/Modem printer" +msgstr "เครื่องพิมพ์แบบอนุกรม โทรสาร/โมเด็ม" -#: marginwidget.cpp:37 +#: management/kmpropbackend.cpp:71 msgid "" -"Top Margin
. " -"This spinbox/text edit field lets you control the top margin of your " -"printout if the printing application does not define its margins internally. " -"
" -"The setting works for instance for ASCII text file printing, or for printing " -"from KMail and and Konqueror..
" -"Note:
This margin setting is not intended for KOffice or " -"OpenOffice.org printing, because these applications (or rather their users) " -"are expected to do it by themselves. It also does not work for PostScript or " -"PDF file, which in most cases have their margins hardcoded internally. " -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o page-top=... # use values from \"0\" or higher. \"72\" is " -"equal to 1 inch.
Bottom Margin
. " -"This spinbox/text edit field lets you control the bottom margin of your " -"printout if the printing application does not define its margins internally. " -"
" -"The setting works for instance for ASCII text file printing, or for printing " -"from KMail and and Konqueror.
" -"Note:
This margin setting is not intended for KOffice or " -"OpenOffice.org printing, because these applications (or rather their users) " -"are expected to do it by themselves. It also does not work for PostScript or " -"PDF file, which in most cases have their margins hardcoded internally. " -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o page-bottom=... # use values from \"0\" or higher. \"72\" is " -"equal to 1 inch.
Left Margin
. " -"This spinbox/text edit field lets you control the left margin of your " -"printout if the printing application does not define its margins internally. " -"
" -"The setting works for instance for ASCII text file printing, or for printing " -"from KMail and and Konqueror.
" -"Note:
This margin setting is not intended for KOffice or " -"OpenOffice.org printing, because these applications (or rather their users) " -"are expected to do it by themselves. It also does not work for PostScript or " -"PDF file, which in most cases have their margins hardcoded internally. " -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o page-left=... # use values from \"0\" or higher. \"72\" is " -"equal to 1 inch.
Enter the information concerning your printer or class. Name " +"is mandatory, Location and Description " +"are not (they may even not be used on some systems).
" msgstr "" +"ใส่ข้อมูลเกี่ยวกับเครื่องพิมพ์หรือคลาสของคุณ โดยอย่างน้อยจะต้องกรอกในส่วน " +"ชื่อ ส่วน ตำแหน่ง และ รายละเอียด ไม่ต้องกรอกก็ได้ " +"(อาจจะไม่ใช้บนบางระบบ)
" -#: marginwidget.cpp:95 -msgid "" -"Right Margin
. " -"This spinbox/text edit field lets you control the right margin of your " -"printout if the printing application does not define its margins internally. " -"
" -"The setting works for instance for ASCII text file printing, or for printing " -"from KMail and and Konqueror.
" -"Note:
This margin setting is not intended for KOffice or " -"OpenOffice.org printing, because these applications (or rather their users) " -"are expected to do it by themselves. It also does not work for PostScript or " -"PDF file, which in most cases have their margins hardcoded internally. " -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o page-right=... # use values from \"0\" or higher. \"72\" is " -"equal to 1 inch.
Change Measurement Unit
. " -"You can change the units of measurement for the page margins here. Select " -"from Millimeter, Centimeter, Inch or Pixels (1 pixel == 1/72 inch).
เปลี่ยนหน่วยวัด
" -"คุณสามารถเปลี่ยนหน่วยวัดสำหรับขอบหน้าได้ที่นี่ เลือกจาก มิลลิเมตร, " -"เซนติเมตร, นิ้ว หรือ พิกเซล (1 พิกเซล == 1/72 นิ้ว)
Custom Margins Checkbox
. " -"Enable this checkbox if you want to modify the margins of your printouts " -"
You can change margin settings in 4 ways: " -"
%1
%1
\"Drag-your-Margins\"
. " -"Use your mouse to drag and set each margin on this little preview window. " -"
\"ลากขอบของคุณ\"
" -"ใช้เม้าส์ลากและตั้งค่าขอบแต่ละขอบในหน้าต่างแสดงตัวอย่างเล็กๆ นี้
The command will use an output file. If checked, make sure the command " +"contains an output tag.
" msgstr "" -"ไม่สามารถบันทึกเอกสารการพิมพ์ไปยัง %1 ได้ " -"โปรดตรวจสอบว่าคุณมีสิทธิ์ในการเขียนไปยังมัน" +"คำสั่งสำหรับใช้พิมพ์ออกเป็นแฟ้ม ซึ่งหากเลือกใช้ " +"จะต้องแน่ใจว่าในคำสั่งนั้นมีส่วนของแท็กส่งออแล้ว
" -#: kprinterimpl.cpp:233 +#: management/kmspecialprinterdlg.cpp:108 #, c-format -msgid "Printing document: %1" -msgstr "กำลังพิมพ์เอกสาร: %1" +msgid "" +"The command to execute when printing on this special printer. Either enter " +"the command to execute directly, or associate/create a command object with/for " +"this special printer. The command object is the preferred method as it provides " +"support for advanced settings like mime type checking, configurable options and " +"requirement list (the plain command is only provided for backward " +"compatibility). When using a plain command, the following tags are " +"recognized:
" +"คำสั่งที่จะประมวลผลเมื่อมีการพิมพ์มายังเครื่องพิมพ์พิเศษนี้ " +"ซึ่งอาจกรอกคำสั่งสำหรับประมวลผลโดยตรงหรือสร้างออบเจ็กต์คำสั่งพร้อมกับ/สำหรับเครื" +"่องพิมพ์พิเศษนี้ออบเจ็กต์คำสั่งเป็นวิธีการที่ใช้ในการแสดงถึงการสนับสนุนสำหรับการ" +"ตั้งค่าแบบก้าวหน้า คล้ายกับการตรวจสอบประเภท MIME " +"ในตัวเลือกที่สามารถเลือกได้และรายการที่ต้องการ " +"(คำสั่งธรรมดานั้นเป็นเพียงการให้เข้ากันได้กับรุ่นก่อนๆ) เมื่อใช้คำสั่งธรรมดา " +"แท็กที่ตามมาจะถูกนำไปดำเนินการ:
" +"The default mimetype for the output file (e.g. application/postscript).
" +msgstr "ประเภท mime ของแฟ้มส่งออก (เช่น application/postscript)
" + +#: management/kmspecialprinterdlg.cpp:121 +msgid "The default extension for the output file (e.g. ps, pdf, ps.gz).
" +msgstr "ส่วนขยายปริยายของแฟ้มส่งออก(เช่น ps, pdf, ps.gz)
" + +#: management/kmspecialprinterdlg.cpp:170 +msgid "You must provide a non-empty name." +msgstr "คุณต้องระบุชื่อก่อน" + +#: management/kmspecialprinterdlg.cpp:178 +#, c-format +msgid "Invalid settings. %1." +msgstr "การตั้งค่าผิดพลาด %1" + +#: management/kmspecialprinterdlg.cpp:197 +#, c-format +msgid "Configuring %1" +msgstr "กำลังปรับแต่ง %1" + +#: management/kmwdriverselect.cpp:37 +msgid "Driver Selection" +msgstr "เลือกไดรเวอร์" + +#: management/kmwdriverselect.cpp:43 +msgid "" +"Several drivers have been detected for this model. Select the driver you " +"want to use. You will have the opportunity to test it as well as to change it " +"if necessary.
" +msgstr "" +"มีไดรเวอร์หลายตัวที่ใช้ได้กับเครื่องพิมพ์รุ่นนี้ " +"โปรดเลือกไดรเวอร์ที่คุณต้องการใช้ " +"โดยคุณอาจจะทำการทดสอบการพิมพ์เพื่อเลือกไดรเวอร์ที่เหมาะสมก่อนก็ได้
" + +#: management/kmwdriverselect.cpp:46 +msgid "Driver Information" +msgstr "ข้อมูลไดรเวอร์" + +#: management/kmwdriverselect.cpp:62 +msgid "You must select a driver." +msgstr "คุณต้องเลือกไดรเวอร์ก่อน" -#: kprinterimpl.cpp:251 -#, c-format -msgid "Sending print data to printer: %1" -msgstr "กำลังส่งข้อมูลไปยังเครื่องพิมพ์: %1" +#: management/kmwdriverselect.cpp:82 +msgid " [recommended]" +msgstr " [แนะนำ]" -#: kprinterimpl.cpp:279 -msgid "Unable to start child print process. " -msgstr "ไม่สามารถเริ่มการทำงานโปรเซสลูกของการพิมพ์ได้" +#: management/kmwdriverselect.cpp:113 +msgid "No information about the selected driver." +msgstr "ไม่มีข้อมูลเกี่ยวกับไดรเวอร์ที่เลือกไว้" -#: kprinterimpl.cpp:281 -msgid "" -"The TDE print server (tdeprintd) could not be contacted. Check that this " -"server is running." -msgstr "" -"ไม่สามารถติดต่อกับเซิร์ฟเวอร์การพิมพ์ TDE (tdeprintd" -") ได้ โปรดตรวจสอบว่าเซิร์ฟเวอร์ดังกล่าวยังทำงานอยู่" +#: management/kmwend.cpp:33 +msgid "Confirmation" +msgstr "การยืนยัน" -#: kprinterimpl.cpp:283 -msgid "" -"_: 1 is the command thatUnable to perform the requested page selection. The filter psselect " -"cannot be inserted in the current filter chain. See Filter " -"tab in the printer properties dialog for further information.
" -msgstr "" -"ไม่สามารถทำการเลือกหน้าเพจที่ต้องการได้ ไม่สามารถแทรกตัวกรอง psselect " -"เข้าไปยังสายโซ่ตัวกรองปัจจุบันได้ ดูที่แท็บ ตัวกรอง " -"ในกล่องคุณสมบัติเครื่องพิมพ์ สำหรับข้อมูลที่มากกว่านี้
" +#: management/kmpropmembers.cpp:39 management/kmwend.cpp:59 +msgid "Members" +msgstr "สมาชิก" -#: kprinterimpl.cpp:355 -msgid "Could not load filter description for %1.
" -msgstr "ไม่สามารถโหลดรายละเอียดของตัวกรองสำหรับ %1 ได้
" +#: management/kmwend.cpp:69 +msgid "Backend" +msgstr "ประเภทเครื่องพิมพ์" -#: kprinterimpl.cpp:371 -msgid "" -"Error while reading filter description for %1" -". Empty command line received.
" -msgstr "" -"มีข้อผิดพลาด ขณะอ่านรายละเอียดสำหรับ %1 โดยได้รับคำสั่งว่างๆ
" +#: management/kmwend.cpp:74 +msgid "Device" +msgstr "อุปกรณ์" -#: kprinterimpl.cpp:385 -msgid "" -"The MIME type %1 is not supported as input of the filter chain (this may happen " -"with non-CUPS spoolers when performing page selection on a non-PostScript " -"file). Do you want TDE to convert the file to a supported format?" -msgstr "" -"ไม่สนับประเภท MIME %1 ให้ใช้ในการเติมสายโซ่ตัวกรอง (ซึ่งอาจเกิดจาก " -"ไม่ใช่ที่พักข้อมูลของ CUPS เมื่อมีการเลือกหน้าเพจ " -"บนเอกสารที่ไม่ใช่โพสต์สคริปต์) คุณต้องการให้ TDE แปลงแฟ้มนี้ " -"ให้อยู่ในรูปแบบที่สนับสนุนแทนหรือไม่ ?" +#: management/kmwend.cpp:77 +msgid "Printer IP" +msgstr "IP ของเครื่องพิมพ์" -#: kprinterimpl.cpp:389 kprinterimpl.cpp:509 -msgid "Convert" -msgstr "แปลง" +#: management/kmwend.cpp:78 management/kmwend.cpp:89 +msgid "Port" +msgstr "พอร์ต" -#: kprinterimpl.cpp:399 -msgid "Select MIME Type" -msgstr "เลือกประเภท MIME" +#: management/kmwend.cpp:81 management/kmwend.cpp:88 +msgid "Host" +msgstr "โฮสต์" -#: kprinterimpl.cpp:400 -msgid "Select the target format for the conversion:" -msgstr "เลือกรูปแบบเป้าหมายสำหรับการแปลง:" +#: management/kmwend.cpp:82 rlpr/kmproprlpr.cpp:48 +msgid "Queue" +msgstr "คิว" -#: kprinterimpl.cpp:404 kprinterimpl.cpp:430 -msgid "Operation aborted." -msgstr "ยกเลิกปฏิบัติการแล้ว" +#: management/kmwend.cpp:91 +msgid "Account" +msgstr "บัญชีผู้ใช้" -#: kprinterimpl.cpp:410 -msgid "No appropriate filter found. Select another target format." -msgstr "ไม่มีตัวกรองการแปลงรูปแบบที่ต้องการ โปรดเลือกรูปแบบเป้าหมายแบบอื่น" +#: management/kmwend.cpp:96 +msgid "URI" +msgstr "ตำแหน่ง URI" -#: kprinterimpl.cpp:423 -msgid "" -"%1
Enter the information concerning the remote LPD queue; this wizard will " +"check it before continuing.
" msgstr "" -"ใส่ข้อมูลเกี่ยวกับคิวเครื่องพิมพ์ระยะไกล LPD และเครื่องมือช่วยเหลือนี้ " +"จะทำการตรวจสอบมันก่อนที่จะทำงานต่อไป
" -#: kprinterimpl.cpp:510 management/kmwname.cpp:62 -msgid "Keep" -msgstr "คงเดิม" +#: cups/kmwipp.cpp:42 management/kmwlpd.cpp:46 rlpr/kmproprlpr.cpp:34 +#: rlpr/kmwrlpr.cpp:62 +msgid "Host:" +msgstr "โฮสต์:" -#: kprinterimpl.cpp:518 -msgid "" -"The exact list of choices depends on the printer driver (\"PPD\") you have " +"installed.
Note 1: the page images get scaled down accordingly to print 2 or 4 " +"pages per sheet. The page image does not get scaled if you print 1 page per " +"sheet (the default setting.). " +"
Note 2: If you select multiple pages per sheet here, the scaling and " +"re-arranging is done by your printing system. " +"
Note 3, regarding \"Other\": You cannot really select Other " +"as the number of pages to print on one sheet.\"Other\" is checkmarked here for " +"information purposes only. " +"
To select 8, 9, 16 or other numbers of pages per sheet: " +"
You can select 2 alternatives: " +"
Use this combo box to select the printer to which you want to print. " +"Initially (if you run TDEPrint for the first time), you may only find the " +"TDE special printers (which save jobs to disk [as PostScript- or " +"PDF-files], or deliver jobs via email (as a PDF attachment). If you are missing " +"a real printer, you need to... " +"
Note: It may happen that you successfully connected to a remote CUPS " +"server and still do not get a printer list. If this happens: force TDEPrint to " +"re-load its configuration files. To reload the configuration files, either " +"start kprinter again, or use the switch the print system away from CUPS and " +"back again once. The print system switch can be made through a selection in " +"the drop-down menu at bottom of this dialog when fully expanded).
ใช้กล่องคอมโบนี้เพื่อเลือกเครื่องพิมพ์ที่คุณต้องการจะใช้ในการพิมพ์ " +"การเริ่มการทำงาน (หากคุณเรียกเครื่องมือจัดการการพิมพ์ (TDEPrint) เป็นครั้งแรก) " +"จะอาจจะพบเพียง เครื่องพิมพ์แบบพิเศษ (ใช้บันทึกงานพิมพ์ลงดิสก์เป็นแฟ้ม " +"[เช่น แฟ้มโพสสคริปต์ หรือ แฟ้ม PDF] หรืออาจจะส่งงานพิมพ์ผ่านทางอีเมล์ " +"(เป็นแฟ้มแนบแบบ PDF) " +"หากเครื่องพิมพ์ที่คุณมีอยู่ยังไม่มีในรายการเครื่องพิมพ์คุณต้อง... " +"
ข้อควรจำ: เมื่อคุณเชื่อมต่อไปยังระบบการพิมพ์ CUPS เรียบร้อยแล้ว " +"แต่ก็ยังไม่มีรายการเครื่องพิมพ์อยู่ คุณสามารถบังคับให้เครื่องมือการพิมพ์ " +"(TDEPrint) ทำการโหลดแฟ้มปรับแต่งใหม่อีกครั้ง " +"จากนั้นให้เรียกโปรแกรมระบบการพิมพ์ใหม่อีกครั้ง " +"หรือเปลี่ยนระบบการพิมพ์เป็นตัวอื่นแทน CUPS แล้วย้อนกลับมาทำใหม่อีกครั้ง " +"การเปลี่ยนระบบการพิมพ์นั้นทำได้โดยการเลือกจากรายการเลื่อนลงทางด้านล่างของกล่องโต" +"้ตอบนี้
This button opens a dialog where you can make decisions regarding all " +"supported print job options.
ปุ่มนี้จะทำการเปิดกล่องโต้ตอบ " +"ซึ่่งจะให้คุณเลือกและปรับแต่งตัวเลือกของงานพิมพ์ได้
This button reduces the list of visible printers to a shorter, more " +"convenient, pre-defined list.
" +"This is particularly useful in enterprise environments with lots of " +"printers. The default is to show all printers.
" +"To create a personal 'selective view list', click on the " +"'System Options' button at the bottom of this dialog. Then, in the new " +"dialog, select 'Filter' (left column in the " +"TDE Print Configuration dialog) and setup your selection..
" +"Warning: Clicking this button without prior creation of a personal " +"'selective view list' will make all printers dissappear from the " +"view. (To re-enable all printers, just click this button again.)
This button starts the TDE Add Printer Wizard.
" +"Use the Wizard (with \"CUPS\" or \"RLPR\"" +") to add locally defined printers to your system.
" +"Note: The TDE Add Printer Wizard does not " +"work, and this button is disabled if you use \"Generic LPD\", " +"\"LPRng\", or \"Print Through an External Program\".)
Here you can enter any command that would also print for you in a " +"konsole window.
Example: " +"a2ps -P <printername> --medium=A3.
This button shows or hides additional printing options.
This button starts a new dialog where you can adjust various settings of " +"your printing system. Amongst them: " +"
If you enable this checkbox, the printing dialog stays open after you hit " +"the Print button.
" +"This is especially useful, if you need to test various print settings (like " +"color matching for an inkjet printer) or if you want to send your job to " +"multiple printers (one after the other) to have it finished more quickly.
" +"This button calls the \"File Open / Browse Directories\" dialog to allow you " +"to select a file for printing. Note, that " +"
Note: The preview feature (and therefore this checkbox) is only " +"visible for printjobs created from inside TDE applications. If you start " +"kprinter from the commandline, or if you use kprinter as a print command for " +"non-TDE applications (like Acrobat Reader, Firefox or OpenOffice), print " +"preview is not available here.
Note: (Button is only visible if the checkbox for " +"System Options --> General --> Miscellaneous: " +"\"Defaults to the last printer used in the application\" " +"is disabled.)
%1
" -msgstr "ได้รับข้อความผิดพลาดจากตัวจัดการ:%1
" +#: rlpr/kmwrlpr.cpp:124 +msgid "Remote queue %1 on %2" +msgstr "คิวการพิมพ์ระยะไกล %1 บน %2" -#: management/kmmainview.cpp:649 -msgid "Internal error (no error message)." -msgstr "เกิดข้อผิดพลาดภายใน (ไม่ได้รับข้อความผิดพลาด)" +#: rlpr/kmwrlpr.cpp:199 +msgid "No Predefined Printers" +msgstr "ยังไม่ได้กำหนดเครื่องพิมพ์์" -#: management/kmmainview.cpp:667 -msgid "Unable to restart print server." -msgstr "ไม่สามารถเริ่มการทำงานเซิร์ฟเวอร์การพิมพ์ใหม่ได้" +#: rlpr/kmconfigproxy.cpp:29 +msgid "Proxy" +msgstr "พร็อกซี" -#: management/kmmainview.cpp:672 -msgid "Restarting server..." -msgstr "กำลังเริ่มการทำงานเซิร์ฟเวอร์ใหม่..." +#: rlpr/kmconfigproxy.cpp:30 +msgid "RLPR Proxy Server Settings" +msgstr "ตั้งค่าเซิร์ฟเวอร์พร็อกซี RLPR" -#: management/kmmainview.cpp:682 -msgid "Unable to configure print server." -msgstr "ไม่สามารถปรับแต่งเซิร์ฟเวอร์การพิมพ์ได้" +#: lpd/klpdprinterimpl.cpp:46 rlpr/krlprprinterimpl.cpp:53 +msgid "" +"The %1 executable could not be found in your path. Check your " +"installation." +msgstr "ไม่พบ %1 เพื่อใช้ในการประมวลผลบนพาธ โปรดตรวจสอบการติดตั้งของคุณ" -#: management/kmmainview.cpp:687 -msgid "Configuring server..." -msgstr "กำลังปรับแต่งเซิร์ฟเวอร์..." +#: rlpr/krlprprinterimpl.cpp:73 +msgid "The printer is incompletely defined. Try to reinstall it." +msgstr "การกำหนดเครื่องพิมพ์ยังไม่สมบูรณ์ โปรดติดตั้งใหม่อีกครั้ง" -#: management/kmmainview.cpp:842 +#: plugincombobox.cpp:33 msgid "" -"Unable to start printer tool. Possible reasons are: no printer selected, the " -"selected printer doesn't have any local device defined (printer port), or the " -"tool library could not be found." +"This combo box shows (and lets you select) a print subsystem to be used by " +"TDEPrint. (This print subsystem must, of course, be installed inside your " +"Operating System.) TDEPrint usually auto-detects the correct print subsystem by " +"itself upon first startup. Most Linux distributions have \"CUPS\", the " +"Common UNIX Printing System.
This line shows which CUPS server your PC is currently connected to for " +"printing and retrieving printer info. To switch to a different CUPS server, " +"click \"System Options\", then select \"Cups server\" and fill in the required " +"info.
Unable to perform the requested page selection. The filter psselect " +"cannot be inserted in the current filter chain. See Filter " +"tab in the printer properties dialog for further information.
" +msgstr "" +"ไม่สามารถทำการเลือกหน้าเพจที่ต้องการได้ ไม่สามารถแทรกตัวกรอง psselect " +"เข้าไปยังสายโซ่ตัวกรองปัจจุบันได้ ดูที่แท็บ ตัวกรอง " +"ในกล่องคุณสมบัติเครื่องพิมพ์ สำหรับข้อมูลที่มากกว่านี้
" -#: management/kmwdrivertest.cpp:53 -msgid "Description:" -msgstr "คำอธิบาย:" +#: kprinterimpl.cpp:355 +msgid "Could not load filter description for %1.
" +msgstr "ไม่สามารถโหลดรายละเอียดของตัวกรองสำหรับ %1 ได้
" -#: management/kmwdrivertest.cpp:55 -msgid "&Test" -msgstr "ทดสอบ" +#: kprinterimpl.cpp:371 +msgid "" +"Error while reading filter description for %1" +". Empty command line received.
" +msgstr "" +"มีข้อผิดพลาด ขณะอ่านรายละเอียดสำหรับ %1 โดยได้รับคำสั่งว่างๆ
" -#: management/kmwdrivertest.cpp:59 +#: kprinterimpl.cpp:385 msgid "" -"Now you can test the printer before finishing installation. Use the " -"Settings button to configure the printer driver and the Test " -"button to test your configuration. Use the Back " -"button to change the driver (your current configuration will be discarded).
" +"The MIME type %1 is not supported as input of the filter chain (this may happen " +"with non-CUPS spoolers when performing page selection on a non-PostScript " +"file). Do you want TDE to convert the file to a supported format?" msgstr "" -"คุณสามารถทดสอบเครื่องพิมพ์ก่อนเสร็จการติดตั้งได้ในตอนนี้ โดยใช้ปุ่ม " -"ตั้งค่า เพื่อปรับแต่งไดรเวอร์เครื่องพิมพ์ และใช้ปุ่ม ทดสอบ " -"เพื่อทดสอบการปรับแต่งของคุณ ใช้ปุ่ม ย้อนกลับ เพื่อเปลี่ยนไดรเวอร์ " -"(การปรับแต่งปัจจุบันของคุณจะถูกยกเลิก)
" +"ไม่สนับประเภท MIME %1 ให้ใช้ในการเติมสายโซ่ตัวกรอง (ซึ่งอาจเกิดจาก " +"ไม่ใช่ที่พักข้อมูลของ CUPS เมื่อมีการเลือกหน้าเพจ " +"บนเอกสารที่ไม่ใช่โพสต์สคริปต์) คุณต้องการให้ TDE แปลงแฟ้มนี้ " +"ให้อยู่ในรูปแบบที่สนับสนุนแทนหรือไม่ ?" + +#: kprinterimpl.cpp:389 kprinterimpl.cpp:509 +msgid "Convert" +msgstr "แปลง" + +#: kprinterimpl.cpp:399 +msgid "Select MIME Type" +msgstr "เลือกประเภท MIME" + +#: kprinterimpl.cpp:400 +msgid "Select the target format for the conversion:" +msgstr "เลือกรูปแบบเป้าหมายสำหรับการแปลง:" + +#: kprinterimpl.cpp:404 kprinterimpl.cpp:430 +msgid "Operation aborted." +msgstr "ยกเลิกปฏิบัติการแล้ว" -#: management/kmwdrivertest.cpp:117 -msgid "%1
%1
%1
This button calls a little dialog to let you select a filter here.
" +"Note 1: You can chain different filters as long as you make sure " +"that the output of one fits as input of the next. (TDEPrint checks your " +"filtering chain and will warn you if you fail to do so.
" +"Note 2: The filters you define here are applied to your jobfile " +"before it is handed downstream to your spooler and print subsystem " +"(e.g. CUPS, LPRng, LPD).
This button removes the highlighted filter from the list of filters.
ปุ่มนี้จะลบตัวกรองที่อยู่ในแถบสีออกจากรายการของตัวกรอง
This button moves the highlighted filter up in the list of filters, towards " +"the front of the filtering chain.
ปุ่มนี้จะย้ายตัวกรองที่อยู่ในแถบสีขึ้นไปข้างหน้าของรายการตัวกรอง
This button moves the highlighted filter down in the list of filters, " +"towards the end of the filtering chain..
ปุ่มนี้จะย้ายตัวกรองที่อยู่ในแถบสีลงไปด้านท้ายของรายการตัวกรอง
This button lets you configure the currently highlighted filter. It opens a " +"separate dialog.
This field shows some general info about the selected filter. Amongst them " +"are: " +"
This field shows which filters are currently selected to act as " +"'pre-filters' for TDEPrint. Pre-filters are processing the print files " +"before they are send downstream to your real print subsystem.
" +"The list shown in this field may be empty (default).
" +"The pre-filters act on the printjob in the order they are listed (from top " +"to bottom). This is done by acting as a filtering chain " +"where the output of one filter acts as input to the next. By putting the " +"filters into the wrong order, you can make the filtering chain fail. For " +"example: if your file is ASCII text, and you want the output being processed " +"by the 'Multipage per Sheet' filter, the first filter must be one that " +"processes ASCII into PostScript.
" +"TDEPrint can utilize any external filtering program which you may " +"find useful through this interface.
" +"TDEPrint ships preconfigured with support for a selection of common filters. " +"These filters however need to be installed independently from TDEPrint. These " +"pre-filters work for all print subsystems supported by TDEPrint (such " +"as CUPS, LPRng and LPD), because they are not depending on these.
." +"Amongst the pre-configured filters shipping with TDEPrint are:
" +"Please click on the other elements of this dialog to learn more about the " +"TDEPrint pre-filters.
The filter chain is wrong. The output format of at least one filter is not " +"supported by its follower. See Filters tab for more information.
" msgstr "" -"ไม่สามารถทำการ \"%1\" บนงานพิมพ์ที่เลือกไว้ได้ " -"โดยได้รับข้อผิดพลาดจากตัวจัดการคือ:" +"สายโซ่ตัวกรองไม่ถูกต้อง รูปแบบการแสดงผลอย่างน้อยหนึ่งตัวกรอง " +"ไม่ได้สนับสนุนโดยตัวมันเอง ดูที่แท็บ ตัวกรอง สำหรับรายละเอียด
" -#: management/kmjobviewer.cpp:491 -msgid "Hold" -msgstr "หยุดพัก" +#: kpfilterpage.cpp:408 +msgid "Input" +msgstr "นำเข้า" -#: management/kmjobviewer.cpp:496 -msgid "Resume" -msgstr "ทำงานต่อ" +#: kpfilterpage.cpp:409 tools/escputil/escpwidget.cpp:217 +msgid "Output" +msgstr "ส่งออก" -#: management/kmjobviewer.cpp:506 -msgid "Restart" -msgstr "เริ่มทำงานใหม่" +#: kpfileselectpage.cpp:33 +msgid "&Files" +msgstr "เอกสาร" -#: management/kmjobviewer.cpp:514 -#, c-format -msgid "Move to %1" -msgstr "ย้ายไปยัง %1" +#: kprintpreview.cpp:140 +msgid "Do you want to continue printing anyway?" +msgstr "คุณต้องการจะทำการพิมพ์ต่อไปหรือไม่ ?" -#: management/kmjobviewer.cpp:674 -msgid "Operation failed." -msgstr "ปฏิบัติการล้มเหลว" +#: kprintpreview.cpp:148 kprintpreview.cpp:227 +msgid "Print Preview" +msgstr "แสดงภาพก่อนพิมพ์" -#: management/kmconfigjobs.cpp:34 management/kmjobviewer.cpp:699 -msgid "Print Job Settings" -msgstr "ตั้งค่างานพิมพ์" +#: kprintpreview.cpp:278 +msgid "" +"The preview program %1 cannot be found. Check that the program is correctly " +"installed and located in a directory included in your PATH environment " +"variable." +msgstr "" +"ไม่พบโปรแกรมแสดงภาพก่อนพิมพ์ %1 โปรดตรวจสอบว่า โปรแกรมดังกล่าว ได้ถูกติดตั้ง " +"และอยู่ในเส้นทางของพาธในตัวแปรแวดล้อม PATH ของระบบคุณแล้ว" -#: management/kmconfigcommand.cpp:33 -msgid "Commands" -msgstr "คำสั่ง" +#: kprintpreview.cpp:303 +msgid "" +"Preview failed: neither the internal TDE PostScript viewer (KGhostView) nor any " +"other external PostScript viewer could be found." +msgstr "" +"การแสดงภาพก่อนพิมพ์ล้มเหลว: อาจจะเนื่องจาก ไม่พบตัวแสดงโพสต์สคริปต์ภายในของ TDE " +"(KGhostView) หรือตัวแสดงโพสต์สคริปต์ภายนอกอื่น ๆ" -#: management/kmconfigcommand.cpp:34 -msgid "Command Settings" -msgstr "ตั้งค่าคำสั่ง" +#: kprintpreview.cpp:307 +#, c-format +msgid "" +"Preview failed: TDE could not find any application to preview files of type %1." +msgstr "" -#: management/kmconfigcommand.cpp:37 -msgid "Edit/Create Commands" -msgstr "แก้ไข / สร้างคำสั่ง" +#: kprintpreview.cpp:317 +#, c-format +msgid "Preview failed: unable to start program %1." +msgstr "การแสดงตัวอย่างล้มเหลว: ไม่สามารถเริ่มการทำงานโปรแกรม %1 ได้" -#: management/kmconfigcommand.cpp:39 +#: kprintpreview.cpp:322 +msgid "Do you want to continue printing?" +msgstr "คุณต้องการจะทำการพิมพ์ต่อไปหรือไม่ ?" + +#: kpdriverpage.cpp:48 msgid "" -"Command objects perform a conversion from input to output."
-"
They are used as the basis to build both print filters and special "
-"printers. They are described by a command string, a set of options, a set of "
-"requirements and associated mime types. Here you can create new command objects "
-"and edit existing ones. All changes will only be effective for you."
+"
ออบเจ็กต์คำสั่งจำทำการแปลงจากส่วนนำเข้าไปเป็นส่วนส่งออก"
-" Brightness: Slider to control the brightness value of all colors "
+"used. The brightness value can range from 0 to 200. Values greater than 100 will "
+"lighten the print. Values less than 100 will darken the print. Additional hint for power users: This TDEPrint GUI element "
+"matches with the CUPS commandline job option parameter: "
+"
และถูกใช้เป็นพื้นฐานการสร้างทั้งตัวกรองการพิมพ์และเครื่องพิมพ์แบบพิเศษ "
-"ซึ่งมันอธิบายได้จากข้อความคำสั่ง ชุดของตัวเลือก ชุดของความต้องการ และ ประเภท "
-"mime ที่สนับสนุน โดยคุณสามารถสร้างออบเจ็กต์คำสั่งใหม่ "
-"และแก้ไขคำสั่งที่มีอยู่แล้วได้ที่นี่ ซึ่งการเปลี่ยนแปลงทั้งหมด "
-"จะมีผลเฉพาะกับคุณเท่านั้น"
+"
"
+"
"
+" -o brightness=... # use range from \"0\" to \"200\"
Hue (Tint): Slider to control the hue value for color rotation.
" +"The hue value is a number from -360 to 360 and represents the color hue " +"rotation. The following table summarizes the change you will see for the base " +"colors: " +"
Original | " +"hue=-45 | " +"hue=45 |
---|---|---|
Red | " +"Purple | " +"Yellow-orange |
Green | " +"Yellow-green | " +"Blue-green |
Yellow | " +"Orange | " +"Green-yellow |
Blue | " +"Sky-blue | " +"Purple |
Magenta | " +"Indigo | " +"Crimson |
Cyan | " +"Blue-green | " +"Light-navy-blue |
Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o hue=... # use range from \"-360\" to \"360\"
Saturation: Slider to control the saturation value for all colors " +"used.
" +"The saturation value adjusts the saturation of the colors in an image, " +"similar to the color knob on your television. The color saturation value.can " +"range from 0 to 200. On inkjet printers, a higher saturation value uses more " +"ink. On laserjet printers, a higher saturation uses more toner. A color " +"saturation of 0 produces a black-and-white print, while a value of 200 will " +"make the colors extremely intense.
" +"Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o saturation=... # use range from \"0\" to \"200\"" +"
Gamma: Slider to control the gamma value for color correction.
" +"The gamma value can range from 1 to 3000. A gamma values greater than 1000 " +"lightens the print. A gamma value less than 1000 darken the print. The default " +"gamma is 1000.
" +"Note:
the gamma value adjustment is not visible in the thumbnail " +"preview. " +"Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o gamma=... # use range from \"1\" to \"3000\"" +"
Locally-connected printer
" -"Use this for a printer connected to the computer via a parallel, serial or " -"USB port.
Image Printing Options
" +"All options controlled on this page only apply to printing images. Most " +"image file formats are supported. To name a few: JPEG, TIFF, PNG, GIF, PNM " +"(PBM/PGM/PNM/PPM), Sun Raster, SGI RGB, Windows BMP. Options to influence color " +"output of image printouts are: " +"
For a more detailed explanation about Brightness, Hue, Saturation and Gamma " +"settings, please look at the 'WhatsThis' items provided for these controls. " +"
เครื่องพิมพ์แบบต่อตรง
" -"เลือกตัวเลือกนี้สำหรับเครื่องพิมพ์ที่ต่อตรงเข้ากับเครื่องของคุณ " -"ซึ่งอาจจะต่อผ่านทางพอร์ตขนาน, อนุกรม หรือ USB ก็ได้
Coloration Preview Thumbnail
" +"The coloration preview thumbnail indicates change of image coloration by " +"different settings. Options to influence output are: " +"
For a more detailed explanation about Brightness, Hue, Saturation and Gamma " +"settings, please look at the 'WhatsThis' items provided for these controls. " +"
Shared Windows printer
" -"Use this for a printer installed on a Windows server and shared on the " -"network using the SMB protocol (samba).
Image Size: Dropdown menu to control the image size on the printed " +"paper. Dropdown works in conjunction with slider below. Dropdown options " +"are:.
" +"Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o natural-scaling=... # range in % is 1....800 " +"" +"
-o scaling=... # range in % is 1....800 " +"
-o ppi=... # range in ppi is 1...1200
เครื่องพิมพ์แบบเครือข่าย
" -"เลือกตัวเลือกนี้หากเครื่องพิมพ์ที่คุณต้องการใช้ " -"เชื่อมต่ออยู่กับเครื่องคอมพิวเตอร์ที่ใช้ระบบวินโดว์ส หรือใช้งานผ่านโปรโตคอล SMB " -"(เช่น samba)
Print queue on a remote LPD server
" -"Use this for a print queue existing on a remote machine running a LPD print " -"server.
Position Preview Thumbnail
" +"This position preview thumbnail indicates the position of the image on the " +"paper sheet. " +"
Click on horizontal and vertical radio buttons to move image alignment on " +"paper around. Options are: " +"
พิมพ์ไปยังเครื่องพิมพ์บนเครือข่ายที่ให้บริการเซิร์ฟเวอร์ LPD
" -"เลือกตัวเลือกนี้สำหรับการพิมพ์ผ่านเครือข่าย " -"โดยเครื่องที่ให้บริการเปิดบริการผ่านเซิร์ฟเวอร์งานพิมพ์แบบ LPD
Network TCP printer
" -"Use this for a network-enabled printer using TCP (usually on port 9100) as " -"communication protocol. Most network printers can use this mode.
Reset to Default Values
" +"Reset all coloration settings to default values. Default values are: " +"
เครื่องพิมพ์แบบเครือข่าย TCP
" -"เลือกตัวเลือกนี้สำหรับเครื่องพิมพ์ที่เป็นแบบเครื่องพิมพ์เครือข่าย " -"โดยสื่อสารทางโปรโตคอล TCP (มักจะเปิดให้บริการด้วยพอร์ตหมายเลข 9100) " -"โดยทั่วไปแล้วจะสามารถใช้ตัวเลือกนี้กับเครื่องพิมพ์ที่เป็นแบบเครือข่ายในตัวได้เลย" -"
The printing will be redirected to a file. Enter here the path of the file " -"you want to use for redirection. Use an absolute path or the browse button for " -"graphical selection.
" +"Image Positioning:
" +"Select a pair of radiobuttons to move image to the position you want on the " +"paper printout. Default is 'center'.
" +"Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o position=... # examples: \"top-left\" or \"bottom\"" +"
การพิมพ์จะถูกส่งออกเป็นเอกสาร " -"โปรดเติมชื่อเอกสารและเส้นทางของเอกสารที่คุณต้องการส่งออก " -"เติมเส้นทางเองหรือใช้ปุ่มเลือกเอกสาร สำหรับการเลือกในแบบกราฟิกก็ได้
" - -#: management/kmwfile.cpp:44 -msgid "Print to file:" -msgstr "พิมพ์ไปยังเอกสาร:" - -#: management/kmconfiggeneral.cpp:137 management/kmwfile.cpp:60 -msgid "Empty file name." -msgstr "ไม่มีชื่อเอกสาร" - -#: management/kmwfile.cpp:66 -msgid "Directory does not exist." -msgstr "ยังไม่มีไดเร็กทอรีอยู่" - -#: management/kmdriverdbwidget.cpp:51 -msgid "&PostScript printer" -msgstr "เครื่องพิมพ์โพสต์สคริปต์" - -#: management/kmdriverdbwidget.cpp:52 -msgid "&Raw printer (no driver needed)" -msgstr "เครื่องพิมพ์ธรรมดา (ไม่ต้องการไดรเวอร์)" - -#: management/kmdriverdbwidget.cpp:55 -msgid "&Other..." -msgstr "อื่น ๆ..." - -#: management/kmdriverdbwidget.cpp:56 -msgid "&Manufacturer:" -msgstr "ผู้ผลิต:" - -#: management/kmdriverdbwidget.cpp:57 -msgid "Mo&del:" -msgstr "รุ่น:" - -#: management/kmdriverdbwidget.cpp:157 management/kmdriverdbwidget.cpp:166 -msgid "Loading..." -msgstr "กำลังโหลด..." - -#: management/kmdriverdbwidget.cpp:217 -msgid "Unable to find the PostScript driver." -msgstr "ไม่สามารถค้นหาไดรเวอร์โพสต์สคริปต์ได้" - -#: management/kmdriverdbwidget.cpp:230 -msgid "Select Driver" -msgstr "เลือกไดรเวอร์" - -#: management/kmdriverdbwidget.cpp:247 management/kmdriverdbwidget.cpp:249 -msgid "Characters Per Inch
" +"This setting controls the horizontal size of characters when printing a text " +"file.
" +"The default value is 10, meaning that the font is scaled in a way that 10 " +"characters per inch will be printed.
" +"Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o cpi=... # example: \"8\" or \"12\"
Lines Per Inch
" +"This setting controls the vertical size of characters when printing a text " +"file.
" +"The default value is 6, meaning that the font is scaled in a way that 6 " +"lines per inch will be printed.
" +"Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o lpi=... # example \"5\" or \"7\"
Columns
" +"This setting controls how many columns of text will be printed on each page " +"when. printing text files.
" +"The default value is 1, meaning that only one column of text per page will " +"be printed.
" +"Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o columns=... # example: \"2\" or \"4\"
Text Formats
" +"These settings control the appearance of text on printouts. They are only " +"valid for printing text files or input directly through kprinter.
" +"Note: These settings have no effect whatsoever for other input " +"formats than text, or for printing from applications such as the KDE Advanced " +"Text Editor. (Applications in general send PostScript to the print system, and " +"'kate' in particular has its own knobs to control the print output.
. " +"Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o cpi=... # example: \"8\" or \"12\" " +"
-o lpi=... # example: \"5\" or \"7\" " +"
-o columns=... # example: \"2\" or \"4\"
Margins
" +"These settings control the margins of printouts on the paper. They are not " +"valid for jobs originating from applications which define their own page " +"layout internally and send PostScript to TDEPrint (such as KOffice or " +"OpenOffice.org).
" +"When printing from KDE applications, such as KMail and Konqueror, or " +"printing an ASCII text file through kprinter, you can choose your preferred " +"margin settings here.
" +"Margins may be set individually for each edge of the paper. The combo box at " +"the bottom lets you change the units of measurement between Pixels, " +"Millimeters, Centimeters, and Inches.
" +"You can even use the mouse to grab one margin and drag it to the intended " +"position (see the preview picture on the right side).
" +"Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o page-top=... # example: \"72\" " +"
-o page-bottom=... # example: \"24\" " +"
-o page-left=... # example: \"36\" " +"
-o page-right=... # example: \"12\"
Turn Text Printing with Syntax Highlighting (Prettyprint) On!
" +"ASCII text file printouts can be 'prettyfied' by enabling this option. If " +"you do so, a header is printed at the top of each page. The header contains " +"the page number, job title (usually the filename), and the date. In addition, C " +"and C++ keywords are highlighted, and comment lines are italicized.
" +"This prettyprint option is handled by CUPS.
" +"If you prefer another 'plaintext-to-prettyprint' converter, look for the " +"enscript pre-filter on the Filters tab.
" +"Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o prettyprint=true.
Turn Text Printing with Syntax Highlighting (Prettyprint) Off!
" +"ASCII text file printing with this option turned off are appearing without a " +"page header and without syntax highlighting. (You can still set the page " +"margins, though.)
" +"Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o prettyprint=false
Print Text with Syntax Highlighting (Prettyprint)
" +"ASCII file printouts can be 'prettyfied' by enabling this option. If you do " +"so, a header is printed at the top of each page. The header contains the page " +"number, job title (usually the filename), and the date. In addition, C and C++ " +"keywords are highlighted, and comment lines are italicized.
" +"This prettyprint option is handled by CUPS.
" +"If you prefer another 'plaintext-to-prettyprint' converter, look for the " +"enscript pre-filter on the Filters tab.
" +"Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o prettyprint=true. " +"
-o prettyprint=false
Print queue on remote CUPS server
" +"Use this for a print queue installed on a remote machine running a CUPS " +"server. This allows to use remote printers when CUPS browsing is turned off.
" +"%1
Network IPP printer
" +"Use this for a network-enabled printer using the IPP protocol. Modern " +"high-end printers can use this mode. Use this mode instead of TCP if your " +"printer can do both.
%1
Fax/Modem printer
" +"Use this for a fax/modem printer. This requires the installation of the fax4CUPS " +"backend. Documents sent on this printer will be faxed to the given target fax " +"number.
Other printer
" +"Use this for any printer type. To use this option, you must know the URI of " +"the printer you want to install. Refer to the CUPS documentation for more " +"information about the printer URI. This option is mainly useful for printer " +"types using 3rd party backends not covered by the other possibilities.
Class of printers
" +"Use this to create a class of printers. When sending a document to a class, " +"the document is actually sent to the first available (idle) printer in the " +"class. Refer to the CUPS documentation for more information about class of " +"printers.
Enter the information concerning your printer or class. Name " -"is mandatory, Location and Description " -"are not (they may even not be used on some systems).
" -msgstr "" -"ใส่ข้อมูลเกี่ยวกับเครื่องพิมพ์หรือคลาสของคุณ โดยอย่างน้อยจะต้องกรอกในส่วน " -"ชื่อ ส่วน ตำแหน่ง และ รายละเอียด ไม่ต้องกรอกก็ได้ " -"(อาจจะไม่ใช้บนบางระบบ)
" +#: cups/kmcupsuimanager.cpp:134 +msgid "Cl&ass of printers" +msgstr "คลาสของเครื่องพิมพ์" -#: management/kmwname.cpp:39 -msgid "Name:" -msgstr "ชื่อ:" +#: cups/kmcupsuimanager.cpp:190 +msgid "An error occurred while retrieving the list of available backends:" +msgstr "เกิดความผิดพลาดในระหว่างรับรายการประเภทเครื่องพิมพ์ที่มี:" -#: management/kmwname.cpp:48 -msgid "You must supply at least a name." -msgstr "คุณต้องกรอกอย่างน้อยหนึ่งชื่อ" +#: cups/kmcupsuimanager.cpp:236 +msgid "Priority" +msgstr "ลำดับความสำคัญ" -#: management/kmwname.cpp:56 -msgid "" -"It is usually not a good idea to include spaces in printer name: it may prevent " -"your printer from working correctly. The wizard can strip all spaces from the " -"string you entered, resulting in %1; what do you want to do?" -msgstr "" -"เป็นความคิดที่ไม่ดีนักที่จะให้ชื่อเครื่องพิมพ์มีช่องว่างอยู่ด้วย " -"เพราะอาจจะทำให้เครื่องพิมพ์ของคุณทำงานได้ไม่ถูกต้อง " -"ตัวช่วยเหลือนี้สามารถช่วยลบช่องว่างที่มีอยู่ ออกไปจากชื่อที่คุณเติมไว้ได้ " -"โดยผลลัพธ์จะเป็น %1 คุณต้องการจะทำอะไร ?" +#: cups/kmcupsuimanager.cpp:238 +msgid "Billing Information" +msgstr "ข้อมูลค่าใช้จ่าย" -#: management/kmwname.cpp:62 -msgid "Strip" -msgstr "ลบช่องว่าง" +#: cups/ipprequest.cpp:164 +msgid "You don't have access to the requested resource." +msgstr "คุณไม่ได้รับอนุญาตให้ใช้งานทรัพยากรที่ร้องขอไป" -#: management/kmwdriver.cpp:80 management/kmwend.cpp:106 -#: management/kmwname.cpp:83 -msgid "Raw printer" -msgstr "เครื่องพิมพ์ธรรมดา" +#: cups/ipprequest.cpp:167 +msgid "You are not authorized to access the requested resource." +msgstr "คุณยังไม่ได้รับสิทธิ์ในการเข้าใช้ทรัพยากรที่ร้องขอไป" -#: management/kmwpassword.cpp:37 -msgid "User Identification" -msgstr "การแสดงตัวของผู้ใช้" +#: cups/ipprequest.cpp:170 +msgid "The requested operation cannot be completed." +msgstr "ไม่สามารถทำปฏิบัติการที่ร้องขอมาให้สำเร็จได้" -#: management/kmwpassword.cpp:43 +#: cups/ipprequest.cpp:173 +msgid "The requested service is currently unavailable." +msgstr "ยังไม่สนับสนุนบริการที่ร้องขอในตอนนี้" + +#: cups/ipprequest.cpp:176 +msgid "The target printer is not accepting print jobs." +msgstr "เครื่องพิมพ์ปลายทางไม่ยอมรับงานพิมพ์" + +#: cups/ipprequest.cpp:313 msgid "" -"This backend may require a login/password to work properly. Select the type " -"of access to use and fill in the login and password entries if needed.
" +"Connection to CUPS server failed. Check that the CUPS server is correctly " +"installed and running." msgstr "" -"ประเภทเครื่องพิมพ์นี้ต้องการชื่อผู้ใช้/รหัสผ่านในการทำงาน " -"เลือกประเภทของการเข้าถึงที่จะใช้ " -"และกรอกข้อมูลล็อกอินและรหัสผ่านหากมีการร้องขอ
" +"การเชื่อมต่อไปยังเซิร์ฟเวอร์ CUPS ล้มเหลว โปรดตรวจสอบว่าเซิร์ฟเวอร์ CUPS " +"ได้ถูกติดตั้งไว้อย่างถูกต้องและกำลังทำงานอยู่" -#: management/kmwpassword.cpp:49 -msgid "&Login:" -msgstr "ล็อกอิน:" +#: cups/ipprequest.cpp:316 +msgid "The IPP request failed for an unknown reason." +msgstr "การร้องขอ IPP ล้มเหลวโดยไม่ทราบสาเหตุ" -#: management/kmwpassword.cpp:53 -msgid "&Anonymous (no login/password)" -msgstr "ผู้ใช้ไม่ระบุชื่อ (ไม่ใช้ล็อกอินและรหัสผ่าน)" +#: cups/ipprequest.cpp:461 +msgid "Attribute" +msgstr "แอตทริบิวต์" -#: management/kmwpassword.cpp:54 -msgid "&Guest account (login=\"guest\")" -msgstr "ผู้ใช้ประเภทแขก (ล็อกอิน=\"guest\")" +#: cups/ipprequest.cpp:462 +msgid "Values" +msgstr "ค่า" -#: management/kmwpassword.cpp:55 -msgid "Nor&mal account" -msgstr "ผู้ใช้ปกติ" +#: cups/ipprequest.cpp:500 cups/ipprequest.cpp:567 +msgid "True" +msgstr "จริง" -#: management/kmwpassword.cpp:88 -msgid "Select one option" -msgstr "เลือกหนึ่งตัวเลือก" +#: cups/ipprequest.cpp:500 cups/ipprequest.cpp:567 +msgid "False" +msgstr "เท็จ" -#: management/kmwpassword.cpp:90 -msgid "User name is empty." -msgstr "ยังไม่เติมชื่อผู้ใช้" +#: cups/kmwfax.cpp:39 +msgid "Fax Serial Device" +msgstr "อุปกรณ์โทรสารแบบอนุกรม" -#: management/kmwdriverselect.cpp:37 -msgid "Driver Selection" -msgstr "เลือกไดรเวอร์" +#: cups/kmwfax.cpp:43 +msgid "Select the device which your serial Fax/Modem is connected to.
" +msgstr "เลือกอุปกรณ์อนุกรม โทรสาร/โมเด็ม ของคุณที่เชื่อมต่ออยู่
" + +#: cups/kmwfax.cpp:81 +msgid "You must select a device." +msgstr "คุณต้องเลือกอุปกรณ์ก่อน" + +#: cups/kphpgl2page.cpp:33 +msgid "" +"The 'blackplot' option specifies that all pens should plot in black-only: " +"The default is to use the colors defined in the plot file, or the standard pen " +"colors defined in the HP-GL/2 reference manual from Hewlett Packard.
" +"Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o blackplot=true
The 'fitplot' option specifies that the HP-GL image should be scaled to fill " +" exactly the page with the (elsewhere selected) media size.
" +"The default is 'fitplot is disabled'. The default will therefore use the " +"absolute distances specified in the plot file. (You should be aware that HP-GL " +"files are very often CAD drawings intended for large format plotters. On " +"standard office printers they will therefore lead to the drawing printout " +"being spread across multiple pages.)
" +"Note:This feature depends upon an accurate plot size (PS) command in " +"the HP-GL/2 file. If no plot size is given in the file the filter converting " +"the HP-GL to PostScript assumes the plot is ANSI E size.
" +"Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o fitplot=true
The pen width value can be set here in case the original HP-GL file does not " +"have it set. The pen width specifies the value in micrometers. The default " +"value of 1000 produces lines that are 1000 micrometers == 1 millimeter in " +"width. Specifying a pen width of 0 produces lines that are exactly 1 pixel " +"wide.
" +"Note: The penwidth option set here is ignored if the pen widths are " +"set inside the plot file itself..
" +"Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o penwidth=... # example: \"2000\" or \"500\"
Several drivers have been detected for this model. Select the driver you " -"want to use. You will have the opportunity to test it as well as to change it " -"if necessary.
" +"All options on this page are only applicable if you use TDEPrint to send " +"HP-GL and HP-GL/2 files to one of your printers.
" +"HP-GL and HP-GL/2 are page description languages developed by " +"Hewlett-Packard to drive Pen Plotting devices.
" +"TDEPrint can (with the help of CUPS) convert the HP-GL file format and print " +"it on any installed printer.
" +"Note 1: To print HP-GL files, start 'kprinter' and simply load the " +"file into the running kprinter.
" +"Note 2: The 'fitplot' parameter provided on this dialog does also " +"work for printing PDF files (if your CUPS version is more recent than " +"1.1.22).
" +"Additional hint for power users: These TDEPrint GUI elements " +"match with CUPS commandline job option parameters: " +"
-o blackplot=... # examples: \"true\" or \"false\" " +"
-o fitplot=... # examples: \"true\" or \"false\" " +"
-o penwidth=... # examples: \"true\" or \"false\"
มีไดรเวอร์หลายตัวที่ใช้ได้กับเครื่องพิมพ์รุ่นนี้ " -"โปรดเลือกไดรเวอร์ที่คุณต้องการใช้ " -"โดยคุณอาจจะทำการทดสอบการพิมพ์เพื่อเลือกไดรเวอร์ที่เหมาะสมก่อนก็ได้
" -#: management/kmwdriverselect.cpp:46 -msgid "Driver Information" -msgstr "ข้อมูลไดรเวอร์" +#: cups/kphpgl2page.cpp:113 +msgid "HP-GL/2 Options" +msgstr "ตัวเลือกของ HP-GL/2" -#: management/kmwdriverselect.cpp:62 -msgid "You must select a driver." -msgstr "คุณต้องเลือกไดรเวอร์ก่อน" +#: cups/kphpgl2page.cpp:115 +msgid "&Use only black pen" +msgstr "ใช้เฉพาะสีดำเท่านั้น" -#: management/kmwdriverselect.cpp:82 -msgid " [recommended]" -msgstr " [แนะนำ]" +#: cups/kphpgl2page.cpp:118 +msgid "&Fit plot to page" +msgstr "พอดีกับหน้า" -#: management/kmwdriverselect.cpp:113 -msgid "No information about the selected driver." -msgstr "ไม่มีข้อมูลเกี่ยวกับไดรเวอร์ที่เลือกไว้" +#: cups/kphpgl2page.cpp:122 +msgid "&Pen width:" +msgstr "ความหนาเส้นปากกา:" -#: management/kmpropbackend.cpp:34 -msgid "Printer type:" -msgstr "ประเภทเครื่องพิมพ์:" +#: cups/kmcupsconfigwidget.cpp:65 +msgid "Server Information" +msgstr "ข้อมูลเซิร์ฟเวอร์" -#: management/kmpropbackend.cpp:48 -msgid "Interface" -msgstr "รูปแบบการเชื่อมต่อ" +#: cups/kmcupsconfigwidget.cpp:66 +msgid "Account Information" +msgstr "ข้อมูลบัญชีผู้ใช้" -#: management/kmpropbackend.cpp:49 -msgid "Interface Settings" -msgstr "ตั้งค่ารูปแบบการเชื่อมต่อ" +#: cups/kmcupsconfigwidget.cpp:75 +msgid "&User:" +msgstr "ผู้ใช้:" -#: management/kmpropbackend.cpp:62 -msgid "IPP Printer" -msgstr "เครื่องพิมพ์ IPP" +#: cups/kmcupsconfigwidget.cpp:76 +msgid "Pass&word:" +msgstr "รหัสผ่าน:" -#: management/kmpropbackend.cpp:63 -msgid "Local USB Printer" -msgstr "เครื่องพิมพ์ต่อตรงแบบ USB" +#: cups/kmcupsconfigwidget.cpp:79 +msgid "&Store password in configuration file" +msgstr "เก็บรหัสผ่านไว้ในเอกสารการปรับแต่ง" -#: management/kmpropbackend.cpp:64 -msgid "Local Parallel Printer" -msgstr "เครื่องพิมพ์ต่อตรงแบบพอร์ตขนาน" +#: cups/kmcupsconfigwidget.cpp:81 +msgid "Use &anonymous access" +msgstr "ใช้การติดต่อแบบผู้ใช้ไม่ระบุชื่อ" -#: management/kmpropbackend.cpp:65 -msgid "Local Serial Printer" -msgstr "เครื่องพิมพ์ต่อตรงแบบอนุกรม" +#: cups/cupsaddsmb2.cpp:55 cups/cupsaddsmb2.cpp:363 +msgid "&Export" +msgstr "ส่งออก" -#: management/kmpropbackend.cpp:66 -msgid "Network Printer (socket)" -msgstr "เครื่องพิมพ์เครือข่าย (ผ่านซ็อกเกต)" +#: cups/cupsaddsmb2.cpp:61 +msgid "Export Printer Driver to Windows Clients" +msgstr "ส่งออกไดรเวอร์เครื่องพิมพ์ไปยังไคลเอนต์วินโดว์ส" -#: management/kmpropbackend.cpp:67 -msgid "SMB printers (Windows)" -msgstr "เครื่องพิมพ์แบบ SMB (วินโดว์ส)" +#: cups/cupsaddsmb2.cpp:72 +msgid "&Username:" +msgstr "ชื่อผู้ใช้:" -#: lpd/kmlpduimanager.cpp:45 management/kmpropbackend.cpp:68 -#: rlpr/kmwrlpr.cpp:116 -msgid "Remote LPD queue" -msgstr "เครื่องพิมพ์ LPD ระยะไกล" +#: cups/cupsaddsmb2.cpp:73 +msgid "&Samba server:" +msgstr "เซิร์ฟเวอร์ &Samba:" -#: management/kmpropbackend.cpp:69 -msgid "File printer" -msgstr "เครื่องพิมพ์แบบพิมพ์ลงเอกสาร" +#: cups/cupsaddsmb2.cpp:79 +msgid "" +"Samba server
Adobe Windows PostScript driver files plus the CUPS " +"printer PPD will be exported to the [print$] " +"special share of the Samba server (to change the source CUPS server, use the " +"Samba username
User needs to have write access to the " +"[print$] share on the Samba server. [print$] " +"holds printer drivers prepared for download to Windows clients. This dialog " +"does not work for Samba servers configured with security = share " +"(but works fine with security = user)." +msgstr "" -#: management/kmpropbackend.cpp:71 +#: cups/cupsaddsmb2.cpp:96 msgid "" -"_: Unknown Protocol\n" -"Unknown" -msgstr "ไม่รู้จัก" +"Samba password
The Samba setting encrypt passwords = yes " +"(default) requires prior use of smbpasswd -a [username] " +"command, to create an encrypted Samba password and have Samba recognize it." +msgstr "" -#: management/kmconfigdialog.cpp:38 -msgid "TDE Print Configuration" -msgstr "ปรับแต่งโปรแกรมจัดการงานพิมพ์ TDE" +#: cups/cupsaddsmb2.cpp:267 +#, c-format +msgid "Creating folder %1" +msgstr "กำลังสร้างโฟลเดอร์ %1" -#: management/kmpropdriver.cpp:36 -msgid "Manufacturer:" -msgstr "ผู้ผลิต:" +#: cups/cupsaddsmb2.cpp:275 +#, c-format +msgid "Uploading %1" +msgstr "กำลังอัพโหลด %1" -#: management/kmpropdriver.cpp:37 -msgid "Printer model:" -msgstr "รุ่นเครื่องพิมพ์:" +#: cups/cupsaddsmb2.cpp:283 +#, c-format +msgid "Installing driver for %1" +msgstr "กำลังติดตั้งไดรเวอร์สำหรับ %1" -#: management/kmpropdriver.cpp:38 -msgid "Driver info:" -msgstr "ข้อมูลไดรเวอร์:" +#: cups/cupsaddsmb2.cpp:291 +#, c-format +msgid "Installing printer %1" +msgstr "กำลังติดตั้งเครื่องพิมพ์ %1" -#: lpd/lpdtools.cpp:239 management/kmpropdriver.cpp:53 -#: management/kmwend.cpp:104 -msgid "Driver" -msgstr "ไดรเวอร์" +#: cups/cupsaddsmb2.cpp:333 +msgid "Driver successfully exported." +msgstr "ส่งออกไดรเวอร์เรียบร้อยแล้ว" -#: management/kmwsocket.cpp:38 -msgid "Network Printer Information" -msgstr "ข้อมูลเครื่องพิมพ์แบบเครือข่าย" +#: cups/cupsaddsmb2.cpp:343 +msgid "" +"Operation failed. Possible reasons are: permission denied or invalid Samba " +"configuration (see cupsaddsmb " +"manual page for detailed information, you need " +"CUPS version 1.1.11 or higher). You may want to try again with another " +"login/password." +msgstr "" +"ปฏิบัติการล้มเหลว อาจจะเนื่องจาก: ถูกปฏิเสธสิทธิ์ในการใช้งาน หรือการปรับแต่ง " +"Samba อาจจะไม่ถูกต้อง (ดูที่หน้าคู่มือ " +"cupsaddsmb สำหรับรายละเอียด และคุณจะต้องใช้ " +"CUPS รุ่น 1.1.11 หรือสูงกว่า) คุณอาจจะต้องการลองอีกครั้ง " +"โดยใช้ล็อกอิน/รหัสผ่าน อื่น ๆ" -#: management/kmwsocket.cpp:48 -msgid "&Printer address:" -msgstr "ที่อยู่เครื่องพิมพ์:" +#: cups/cupsaddsmb2.cpp:352 +msgid "Operation aborted (process killed)." +msgstr "ปฏิบัติการถูกยกเลิก (โปรเซสถูกฆ่า)" -#: management/kmwsocket.cpp:49 -msgid "P&ort:" -msgstr "พอร์ต:" +#: cups/cupsaddsmb2.cpp:358 +msgid "%1
" +msgstr "%1
" -#: management/kmwsocket.cpp:99 -msgid "You must enter a printer address." -msgstr "คุณต้องเติมที่อยู่ของเครื่องพิมพ์ก่อน" +#: cups/cupsaddsmb2.cpp:373 +msgid "" +"You are about to prepare the %1 driver to be shared out to Windows " +"clients through Samba. This operation requires the " +"Adobe PostScript Driver, a recent version of Samba 2.2.x and a running SMB " +"service on the target server. Click Export to start the operation. Read " +"the cupsaddsmb manual page in Konqueror or type " +"man cupsaddsmb in a console window to learn more about this " +"functionality." +msgstr "" +"คุณกำลังจะเตรียมไดรเวอร์ %1 เพื่อการใช้ร่วมกับไคลเอนต์วินโดว์สผ่านทาง " +"Samba ซึ่งปฏิบัติการนี้ ต้องการ " +"ไดรเวอร์โพสต์สคริปต์ของ Adobe, โปรแกรม Samba รุ่น 2.2.x และบริการ SMB " +"ที่กำลังทำงานอยู่บนเซิร์ฟเวอร์ คลิ้กที่ ส่งออก " +"เพื่อเริ่มปฏิบัติการ โปรดอ่านคู่มือ cupsaddsmb " +"ในคอนเควอร์เรอร์ หรือพิมพ์ man cupsaddsmb บนหน้าต่างคอนโซล " +"เพื่อศึกษาเกี่ยวกับความสามารถนี้เพิ่มเติม" + +#: cups/cupsaddsmb2.cpp:393 +msgid "" +"Some driver files are missing. You can get them on Adobe web site. See cupsaddsmb manual page for more details (you need " +"CUPS version 1.1.11 or higher)." +msgstr "" +"ไม่มีเอกสารไดรเวอร์บางตัว คุณสามารถหามันได้ที่เว็บไซต์ Adobe ดูรายละเอียดที่หน้าคู่มือ cupsaddsmb (คุณต้องใช้ CUPS รุ่น 1.1.11 หรือสูงกว่า)" + +#: cups/cupsaddsmb2.cpp:404 +#, c-format +msgid "Preparing to upload driver to host %1" +msgstr "กำลังเตรียมการอัพโหลดไดรเวอร์ไปยังโฮสต์ %1" + +#: cups/cupsaddsmb2.cpp:415 +msgid "The driver for printer %1 could not be found." +msgstr "ไม่พบไดรเวอร์สำหรับเครื่องพิมพ์ %1" -#: management/kmwsocket.cpp:110 -msgid "Wrong port number." -msgstr "หมายเลขพอร์ตไม่ถูกต้อง" +#: cups/cupsaddsmb2.cpp:455 +#, c-format +msgid "Preparing to install driver on host %1" +msgstr "กำลังเตรียมการติดตั้งไดรเวอร์บนโฮสต์ %1" -#: management/kmwizard.cpp:64 management/kmwizard.cpp:209 -msgid "&Next >" -msgstr "ต่อไป >" +#: cups/kmpropusers.cpp:39 cups/kmwusers.cpp:36 +msgid "Users Access Settings" +msgstr "ตั้งค่าการเข้าใช้งานของผู้ใช้" -#: management/kmwizard.cpp:66 -msgid "< &Back" -msgstr "< ย้อนกลับ" +#: cups/kmpropusers.cpp:38 cups/kmwusers.cpp:39 +msgid "Users" +msgstr "ผู้ใช้" -#: management/kmwizard.cpp:131 management/kmwizard.cpp:166 -#: management/kmwizard.cpp:191 -msgid "Add Printer Wizard" -msgstr "ตัวช่วยเพิ่มเครื่องพิมพ์" +#: cups/kmwusers.cpp:41 +msgid "Allowed Users" +msgstr "ผู้ใช้ที่อนุญาต" -#: management/kmwizard.cpp:166 -msgid "Modify Printer" -msgstr "แก้ไขเครื่องพิมพ์" +#: cups/kmwusers.cpp:42 +msgid "Denied Users" +msgstr "ผู้ใช้ที่ไม่อนุญาต" -#: management/kmwizard.cpp:191 -msgid "Unable to find the requested page." -msgstr "ไม่สามารถค้นหาหน้าที่เรียกขอ" +#: cups/kmwusers.cpp:44 +msgid "Define here a group of allowed/denied users for this printer." +msgstr "กำหนดกลุ่มผู้ใช้ที่จะอนุญาต / ไม่อนุญาตให้ใช้เครื่องพิมพ์ที่นี่" -#: management/kmwizard.cpp:207 management/kmwizard.cpp:234 -msgid "&Finish" -msgstr "สำเร็จ" +#: cups/kmwippprinter.cpp:45 +msgid "IPP Printer Information" +msgstr "ข้อมูลเครื่องพิมพ์แบบ IPP" -#: management/kmwinfopage.cpp:32 -msgid "Introduction" -msgstr "บทแนะนำ" +#: cups/kmwippprinter.cpp:55 +msgid "&Printer URI:" +msgstr "ตำแหน่ง URI เครื่องพิมพ์:" -#: management/kmwinfopage.cpp:37 -#, fuzzy +#: cups/kmwippprinter.cpp:64 msgid "" -"Welcome,
" -"This wizard will help to install a new printer on your computer. It will " -"guide you through the various steps of the process of installing and " -"configuring a printer for your printing system. At each step, you can always go " -"back using the Back button.
" -"We hope you enjoy this tool!
" -"Either enter the printer URI directly, or use the network scanning " +"facility.
" msgstr "" -"ยินดีต้อนรับ
" -"ตัวช่วยเหลือนี้ จะช่วยในการติดตั้งเครื่องพิมพ์ใหม่สำหรับคอมพิวเตอร์ของคุณ " -"ซึ่งจะแนะนำขั้นตอนการติดตั้งและปรับแต่งเครื่องพิมพ์ทีละขั้นตอน " -"โดยคุณจะสามารถย้อนกลับในแต่ละขั้นตอนได้ โดยใช้ปุ่ม ย้อนกลับ
" -"เราหวังว่าคุณจะสนุกกับการใช้เครื่องมือนี้
" -"ทีมพัฒนาระบบการพิมพ์บน TDE
" +"คุณอาจใส่ทั้ง URI เครื่องพิมพ์โดยตรง หรืออาจใช้การค้นหาจากเครือข่ายก็ได้
" -#: management/kmconfigjobs.cpp:33 management/kmpages.cpp:59 -msgid "Jobs" -msgstr "งานพิมพ์" +#: cups/kmwippprinter.cpp:65 +msgid "&IPP Report" +msgstr "รายงาน IPP" -#: management/kmconfigjobs.cpp:37 -msgid "Jobs Shown" -msgstr "แสดงงานพิมพ์" +#: cups/kmwippprinter.cpp:112 +msgid "You must enter a printer URI." +msgstr "คุณต้องใส่ URI ของเครื่องพิมพ์ก่อน" -#: management/kmconfigjobs.cpp:42 -msgid "Maximum number of jobs shown:" -msgstr "จำนวนงานพิมพ์ทั้งหมดที่ให้แสดง:" +#: cups/kmwippprinter.cpp:173 +msgid "Name: %1Enter the information concerning the remote IPP server owning the targeted " +"printer. This wizard will poll the server before continuing.
" +msgstr "" +"ใส่ข้อมูลรายละเอียดของเซิร์ฟเวอร์ IPP ที่เป็นเจ้าของเครื่องพิมพ์ " +"ซึ่งเครื่องมือช่วยเหลือนี้ จะสอบถามเซิร์ฟเวอร์ก่อนจะทำต่อไป
" -#: management/kxmlcommanddlg.cpp:136 -msgid "Minimum v&alue:" -msgstr "ค่าน้อยที่สุด:" +#: cups/kmwipp.cpp:43 +msgid "Port:" +msgstr "พอร์ต:" -#: management/kxmlcommanddlg.cpp:137 -msgid "Ma&ximum value:" -msgstr "ค่ามากที่สุด:" +#: cups/kmwipp.cpp:59 +msgid "Incorrect port number." +msgstr "หมายเลขพอร์ตไม่ถูกต้อง" -#: management/kmwend.cpp:53 management/kmwend.cpp:112 -#: management/kxmlcommanddlg.cpp:142 management/kxmlcommanddlg.cpp:545 -msgid "Description" -msgstr "รายละเอียด" +#: cups/kmwipp.cpp:72 +msgid "Print Job Billing and Accounting
" +"Insert a meaningful string here to associate the current print job with a " +"certain account. This string will appear in the CUPS \"page_log\" to help with " +"the print accounting in your organization. (Leave it empty if you do not need " +"it.) " +"
It is useful for people who print on behalf of different \"customers\", " +"like print service bureaux, letter shops, press and prepress companies, or " +"secretaries who serve different bosses, etc.
" +"Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o job-billing=... # example: \"Marketing_Department\" or " +"\"Joe_Doe\"
Scheduled Printing
" +"Scheduled printing lets you control the time of the actual printout, while " +"you can still send away your job now and have it out of your way. " +"
Especially useful is the \"Never (hold indefinitely)\" option. It allows " +"you to park your job until a time when you (or a printer administrator) decides " +"to manually release it. " +"
This is often required in enterprise environments, where you normally are " +"not allowed to directly and immediately access the huge production printers in " +"your Central Repro Department. However it is okay to send jobs to the " +"queue which is under the control of the operators (who, after all, need to make " +"sure that the 10,000 sheets of pink paper which is required by the Marketing " +"Department for a particular job are available and loaded into the paper " +"trays).
" +"Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o job-hold-until=... # example: \"indefinite\" or \"no-hold\" " +"
Page Labels
" +"Page Labels are printed by CUPS at the top and bottom of each page. They " +"appear on the pages surrounded by a little frame box. " +"
They contain any string you type into the line edit field.
" +"Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o page-label=\"...\" # example: \"Company Confidential\"" +"
Job Priority
" +"Usually CUPS prints all jobs per queue according to the \"FIFO\" principle: " +"First In, First Out. " +"
The job priority option allows you to re-order the queue according to your " +"needs. " +"
It works in both directions: you can increase as well as decrease " +"priorities. (Usually you can only control your own jobs). " +"
Since the default job priority is \"50\", any job sent with, for example, " +"\"49\" will be printed only after all those others have finished. Conversely, a " +"\"51\" or higher priority job will go right to the top of a populated queue (if " +"no other, higher prioritized one is present).
" +"Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o job-priority=... # example: \"10\" or \"66\" or \"99\"" +"
Enter the URI corresponding to the printer to be installed. Examples:
" +"เติม URI ที่ชี้ไปยังตำแหน่งที่เครื่องพิมพ์ได้ติดตั้งอยู่ ตัวอย่าง:
" +"Set here the quota for this printer. Using limits of 0 "
+"means that no quota will be used. This is equivalent to set quota period to "
+"
ตั้งค่าโควตาเครื่องพิมพ์ที่นี่ โดยการจำกัดโควตาที่ 0 "
+"หมายความว่า ไม่มีการใช้โควตา ซึ่งเหมือนกับการตั้งค่าช่วงของโควตาไปที่
Select a valid detected port, or enter directly the corresponding URI in the " -"bottom edit field.
" -msgstr "" -"เลือกพอร์ตที่ตรวจพบตัวที่ถูกต้อง หรือใส่ตำแหน่ง URI โดยตรง " -"ในช่องกรอกข้อมูลด้านล่าง
" +#: cups/kmwbanners.cpp:62 +msgid "Top Secret" +msgstr "ลับสุดยอด" -#: management/kmwlocal.cpp:78 -msgid "" -"_: The URI is empty\n" -"Empty URI." -msgstr "ยังไม่กรอกหรือเลือกตำแหน่ง URI" +#: cups/kmwbanners.cpp:63 +msgid "Unclassified" +msgstr "ไม่แบ่งประเภท" -#: management/kmwlocal.cpp:83 -msgid "The local URI doesn't correspond to a detected port. Continue?" -msgstr "" -"ตำแหน่ง URI ภายในไม่สนับสนุนกับพอร์ตที่ตรวจสอบได้ ต้องการทำต่อไปหรือไม่ ?" +#: cups/kmwbanners.cpp:86 +msgid "Banner Selection" +msgstr "การเลือกแบนเนอร์" -#: management/kmwlocal.cpp:85 -msgid "Select a valid port." -msgstr "เลือกพอร์ตที่ถูกต้อง" +#: cups/kmpropbanners.cpp:35 cups/kmwbanners.cpp:92 +msgid "&Starting banner:" +msgstr "แบนเนอร์เริ่ม:" -#: management/kmwlocal.cpp:166 -msgid "Unable to detect local ports." -msgstr "ไม่สามารถตรวจสอบพอร์ตภายในได้" +#: cups/kmpropbanners.cpp:36 cups/kmwbanners.cpp:93 +msgid "&Ending banner:" +msgstr "แบนเนอร์จบ:" -#: management/kmwlpd.cpp:41 -msgid "LPD Queue Information" -msgstr "ข้อมูลคิวของเซิร์ฟเวอร์ LPD" +#: cups/kmwbanners.cpp:99 +msgid "" +"Select the default banners associated with this printer. These banners will " +"be inserted before and/or after each print job sent to the printer. If you " +"don't want to use banners, select No Banner.
" +msgstr "" +"เลือกแบนเนอร์โดยปริยายที่กำหนดให้ใช้กับเครื่องพิมพ์นี้ แบนเนอร์นี้ " +"จะถูกแทรกก่อน และ/หรือ หลังจากแต่ละงานพิมพ์ ถูกส่งให้เครื่องพิมพ์แล้ว " +"ถ้าคุณไม่ต้องการใช้แบนเนอร์ ให้เลือก ไม่มีแบนเนอร์
" -#: management/kmwlpd.cpp:44 +#: cups/kptagspage.cpp:36 msgid "" -"Enter the information concerning the remote LPD queue; this wizard will " -"check it before continuing.
" +"Additional Tags
You may send additional commands to the CUPS " +"server via this editable list. There are 3 purposes for this: " +"Standard CUPS job options: A complete list of standard CUPS job " +"options is in the CUPS User Manual" +". Mappings of the kprinter user interface widgets to respective CUPS job " +"option names are named in the various WhatsThis help items..
" +"Custom CUPS job options: CUPS print servers may be customized with " +"additional print filters and backends which understand custom job options. You " +"can specify such custom job options here. If in doubt, ask your system " +"administrator..
" +"" +"
Operator Messages: You may send additional messages to the " +"operator(s) of your production printers (e.g. in your " +"Central Repro Department
) Messages can be read by the operator(s) (or " +"yourself) by viewing the \"Job IPP Report\" for the job. " +"Examples:" +"A standard CUPS job option:" +"" +"
(Name) number-up -- (Value) 9 " +"
" +"
A job option for custom CUPS filters or backends:" +"
(Name) DANKA_watermark -- " +"(Value) Company_Confidential " +"
" +"
A message to the operator(s):" +"
(Name) Deliver_after_completion -- " +"(Value) to_Marketing_Departm." +"
Note: the fields must not include spaces, tabs or quotes. You may " +"need to double-click on a field to edit it. " +"
Warning: Do not use such standard CUPS option names which also can be " +"used through the TDEPrint GUI. Results may be unpredictable if they conflict, " +" or if they are sent multiple times. For all options supported by the GUI, " +"please do use the GUI. (Each GUI element's 'WhatsThis' names the related CUPS " +"option name.)
ใส่ข้อมูลเกี่ยวกับคิวเครื่องพิมพ์ระยะไกล LPD และเครื่องมือช่วยเหลือนี้ " -"จะทำการตรวจสอบมันก่อนที่จะทำงานต่อไป
" -#: management/kmwlpd.cpp:47 rlpr/kmproprlpr.cpp:35 rlpr/kmwrlpr.cpp:63 -msgid "Queue:" -msgstr "คิว:" +#: cups/kptagspage.cpp:77 +msgid "Additional Tags" +msgstr "แท็กเพิ่มเติม" -#: management/kmwlpd.cpp:54 -msgid "Some information is missing." -msgstr "ข้อมูลบางส่วนสูญหาย" +#: cups/kptagspage.cpp:83 +msgid "Value" +msgstr "ค่า" -#: management/kmwlpd.cpp:61 -msgid "Cannot find queue %1 on server %2; do you want to continue anyway?" -msgstr "" -"ไม่สามารถค้นหาคิวการพิมพ์ %1 บนเซิร์ฟเวอร์ %2 ได้ คุณต้องการทำต่อไปหรือไม่ ?" +#: cups/kptagspage.cpp:92 +msgid "Read-Only" +msgstr "อ่านได้อย่างเดียว" -#: management/kmconfigfilter.cpp:40 -msgid "Filter" -msgstr "ตัวกรอง" +#: cups/kptagspage.cpp:115 +msgid "The tag name must not contain any spaces, tabs or quotes: %1." +msgstr "ชื่อแท็กจะต้องไม่มีช่องว่าง, แท็บ หรือเครื่องหมายคำพูด: %1" -#: management/kmconfigfilter.cpp:41 -msgid "Printer Filtering Settings" -msgstr "ตั้งค่าการกรองเครื่องพิมพ์" +#: cups/kmpropbanners.cpp:50 +msgid "Banner Settings" +msgstr "ตั้งค่าแบนเนอร์" -#: management/kmconfigfilter.cpp:44 -msgid "Printer Filter" -msgstr "ตัวกรองเครื่องพิมพ์" +#: cups/kmconfigcups.cpp:32 +msgid "CUPS Server" +msgstr "เซิร์ฟเวอร์ CUPS" -#: management/kmconfigfilter.cpp:56 -msgid "" -"The printer filtering allows you to view only a specific set of printers " -"instead of all of them. This may be useful when there are a lot of printers " -"available but you only use a few ones. Select the printers you want to see from " -"the list on the left or enter a Location filter (ex: Group_1*). Both are " -"cumulative and ignored if empty." -msgstr "" -"ตัวกรองของเครื่องพิมพ์อนุญาตให้คุณได้แสดงผลเฉพาะกับเครื่องพิมพ์ที่ระบุ " -"แทนการแสดงจากทั้งหมดที่มี ซึ่งมักในกรณีที่มีเครื่องพิมพ์มาก " -"แต่คุณมักใช้อยู่ไม่กี่เครื่อง " -"ให้เลือกเครื่องพิมพ์ที่คุณต้องการจะเห็นจากรายการด้านซ้ายมือ หรือเติม " -"ตำแหน่ง ของตัวกรอง (เช่น: Group_1*) (หากปล่อยว่างไว้จะไม่สนใจ)" +#: cups/kmconfigcups.cpp:33 +msgid "CUPS Server Settings" +msgstr "ตั้งค่าเซิร์ฟเวอร์ CUPS" -#: management/kmconfigfilter.cpp:62 -msgid "Location filter:" -msgstr "ตำแหน่งตัวกรอง:" +#: tools/escputil/escpwidget.cpp:45 +msgid "EPSON InkJet Printer Utilities" +msgstr "เครื่องมือสำหรับเครื่องพิมพ์อิงค์เจ็ต EPSON" -#: management/kmconfigfonts.cpp:43 -msgid "Font Settings" -msgstr "ตั้งค่าแบบอักษร" +#: tools/escputil/escpwidget.cpp:91 +msgid "&Use direct connection (might need root permissions)" +msgstr "ใช้การเชื่อมต่อตรง (ต้องการสิทธิ์ของผู้ดูแลระบบ)" -#: management/kmconfigfonts.cpp:46 -msgid "Fonts Embedding" -msgstr "ฝังแฟ้มแบบอักษร" +#: tools/escputil/escpwidget.cpp:103 +msgid "Clea&n print head" +msgstr "ล้างหัวพิมพ์" -#: management/kmconfigfonts.cpp:47 -msgid "Fonts Path" -msgstr "พาธที่เก็บแฟ้มแบบอักษร" +#: tools/escputil/escpwidget.cpp:104 +msgid "&Print a nozzle test pattern" +msgstr "พิมพ์รูปแบบทดสอบหัวพิมพ์" -#: management/kmconfigfonts.cpp:49 -msgid "&Embed fonts in PostScript data when printing" -msgstr "ฝังแฟ้มแบบอักษรเข้าไปยังข้อมูลโพสต์สคริปต์ด้วยเมื่อมีการพิมพ์" +#: tools/escputil/escpwidget.cpp:105 +msgid "&Align print head" +msgstr "การจัดวางหัวพิมพ์" -#: management/kmconfigfonts.cpp:57 -msgid "&Up" -msgstr "ขึ้น" +#: tools/escputil/escpwidget.cpp:106 +msgid "&Ink level" +msgstr "ระดับน้ำหมึก" -#: management/kmconfigfonts.cpp:58 -msgid "&Down" -msgstr "ลง" +#: tools/escputil/escpwidget.cpp:107 +msgid "P&rinter identification" +msgstr "การแสดงตัวของเครื่องพิมพ์" -#: management/kmconfigfonts.cpp:59 -msgid "&Add" -msgstr "เพิ่ม" +#: tools/escputil/escpwidget.cpp:153 +msgid "Internal error: no device set." +msgstr "เกิดข้อผิดพลาดภายใน: ยังไม่ได้ตั้งค่าอุปกรณ์" -#: management/kmconfigfonts.cpp:61 -msgid "Additional director&y:" -msgstr "ไดเรกทอรีเพิ่่มเติม:" +#: tools/escputil/escpwidget.cpp:164 +#, c-format +msgid "Unsupported connection type: %1" +msgstr "ไม่สนับสนุนชนิดของการเชื่อมต่อ: %1" -#: management/kmconfigfonts.cpp:85 +#: tools/escputil/escpwidget.cpp:171 msgid "" -"These options will automatically put fonts in the PostScript file which are not " -"present on the printer. Font embedding usually produces better print results " -"(closer to what you see on the screen), but larger print data as well." +"An escputil process is still running. You must wait until its completion before " +"continuing." msgstr "" -"ตัวเลือกนี้ " -"จะทำการเพิ่มแฟ้มแบบอักษรที่ไม่มีอยู่บนเครื่องพิมพ์เข้าไปในเอกสารโพสต์คริปต์ด้วย " -"ซึ่งการฝังแฟ้มแบบวอักษรเข้าไปด้วยนี้จะทำให้งานพิมพ์มีคุณภาพท่ดีกว่า " -"แต่ก็จะทำให้ข้อมูลงานพิม์มีขนาใหญ่ตขึ้นเช่นกัน" +"โปรเซส escputil กำลังทำงานอยู่แล้ว คุณต้องรอจนกว่ามันจะทำงานเสร็จเสียก่อน" -#: management/kmconfigfonts.cpp:89 +#: tools/escputil/escpwidget.cpp:179 msgid "" -"When using font embedding you can select additional directories where TDE " -"should search for embeddable font files. By default, the X server font path is " -"used, so adding those directories is not needed. The default search path should " -"be sufficient in most cases." +"The executable escputil cannot be found in your PATH environment variable. Make " +"sure gimp-print is installed and that escputil is in your PATH." msgstr "" -"หากมีการใช้การฝังแฟ้มแบบอักษรในเอกสาร คุณจะสามารถเลือกไดเรกทอรีเพิ่มเติม " -"สำหรับให้ TDE ค้นหาแฟ้มแบบอักษรสำหรับใช้งาน " -"ซึ่งโดยปริยายแล้วจะใช้พาธแบบอักษรของเซิร์ฟเวอร์ X " -"ซึ่งเพียงพอต่อการใช้งานอยู่แล้ว " -"ดังนั้นการเพิ่มเส้นทางค้นหาก็ไม่จำเป็นแต่อย่างใด" +"ไม่พบเอกสารคำสั่ง escputil ในตัวแปรแวดล้อม PATH ของคุณ " +"โปรดตรวจสอบว่าคุณได้ติดตั้ง gimp-print และ escputil อยู่ในตัวแปร PATH แล้ว" + +#: tools/escputil/escpwidget.cpp:204 +msgid "Internal error: unable to start escputil process." +msgstr "ข้อผิดพลาดภายใน: ไม่สามารถเริ่มโปรเซส escputil ได้" + +#: tools/escputil/escpwidget.cpp:214 +msgid "Operation terminated with errors." +msgstr "หยุดปฏิบัติการเนื่องจากข้อผิดพลาด" -#: management/kmspecialprinterdlg.cpp:46 -msgid "Add Special Printer" -msgstr "เพิ่มเครื่องพิมพ์พิเศษ" +#: kprintprocess.cpp:75 +msgid "File transfer failed." +msgstr "การส่งถ่ายเอกสารล้มเหลว" -#: management/kmspecialprinterdlg.cpp:58 -msgid "&Location:" -msgstr "ตำแหน่ง:" +#: kprintprocess.cpp:81 +msgid "Abnormal process termination (%1)." +msgstr "โปรเซสจบการทำงานอย่างผิดปกติ (%1)" -#: management/kmspecialprinterdlg.cpp:66 -msgid "Command &Settings" -msgstr "ตั้งค่าคำสั่ง" +#: kprintprocess.cpp:83 +msgid "%1: execution failed with message:%2
" +msgstr "%1: การประมวลผลผิดพลาด โดยแจ้งว่า:%2
" -#: management/kmspecialprinterdlg.cpp:69 -msgid "Outp&ut File" -msgstr "พิมพ์เป็นแฟ้ม" +#: ppdloader.cpp:173 +msgid "(line %1): " +msgstr "(บรรทัด %1): " -#: management/kmspecialprinterdlg.cpp:71 -msgid "&Enable output file" -msgstr "เปิดใช้การพิมพ์เป็นแฟ้ม" +#: lpd/kmlpdmanager.cpp:87 +msgid "Local printer queue (%1)" +msgstr "คิวของเครื่องพิมพ์ภายใน (%1)" -#: management/kmspecialprinterdlg.cpp:88 -msgid "Filename e&xtension:" -msgstr "ส่วนขยายของแฟ้ม:" +#: lpd/kmlpdmanager.cpp:87 +msgid "" +"_: Unknown type of local printer queue\n" +"Unknown" +msgstr "ไม่รู้จัก" -#: management/kmspecialprinterdlg.cpp:105 +#: lpd/kmlpdmanager.cpp:88 +msgid "The command will use an output file. If checked, make sure the command " -"contains an output tag.
" -msgstr "" -"คำสั่งสำหรับใช้พิมพ์ออกเป็นแฟ้ม ซึ่งหากเลือกใช้ " -"จะต้องแน่ใจว่าในคำสั่งนั้นมีส่วนของแท็กส่งออแล้ว
" +"_: Unknown Driver\n" +"Unknown" +msgstr "ไม่รู้จัก" -#: management/kmspecialprinterdlg.cpp:108 -#, c-format +#: lpd/kmlpdmanager.cpp:95 +msgid "Remote LPD queue %1@%2" +msgstr "คิวของเซิร์ฟเวอร์ LPD %1@%2" + +#: lpd/kmlpdmanager.cpp:158 +msgid "Unable to create spool directory %1 for printer %2." +msgstr "ไม่สามารถสร้างไดเร็กทอรีพักข้อมูล %1 สำหรับเครื่องพิมพ์ %2 ได้" + +#: lpd/kmlpdmanager.cpp:165 +msgid "Unable to save information for printer %1." +msgstr "ไม่สามารถบันทึกข้อมูลสำหรับเครื่องพิมพ์ %1 ได้" + +#: lpd/kmlpdmanager.cpp:193 msgid "" -"The command to execute when printing on this special printer. Either enter " -"the command to execute directly, or associate/create a command object with/for " -"this special printer. The command object is the preferred method as it provides " -"support for advanced settings like mime type checking, configurable options and " -"requirement list (the plain command is only provided for backward " -"compatibility). When using a plain command, the following tags are " -"recognized:
" -"คำสั่งที่จะประมวลผลเมื่อมีการพิมพ์มายังเครื่องพิมพ์พิเศษนี้ " -"ซึ่งอาจกรอกคำสั่งสำหรับประมวลผลโดยตรงหรือสร้างออบเจ็กต์คำสั่งพร้อมกับ/สำหรับเครื" -"่องพิมพ์พิเศษนี้ออบเจ็กต์คำสั่งเป็นวิธีการที่ใช้ในการแสดงถึงการสนับสนุนสำหรับการ" -"ตั้งค่าแบบก้าวหน้า คล้ายกับการตรวจสอบประเภท MIME " -"ในตัวเลือกที่สามารถเลือกได้และรายการที่ต้องการ " -"(คำสั่งธรรมดานั้นเป็นเพียงการให้เข้ากันได้กับรุ่นก่อนๆ) เมื่อใช้คำสั่งธรรมดา " -"แท็กที่ตามมาจะถูกนำไปดำเนินการ:
" -"The default mimetype for the output file (e.g. application/postscript).
" -msgstr "ประเภท mime ของแฟ้มส่งออก (เช่น application/postscript)
" +#: lpd/kmlpdmanager.cpp:237 +msgid "Permission denied: you must be root." +msgstr "สิทธิ์ที่อนุญาตไม่เพียงพอ: คุณต้องเป็นผู้ดูแลระบบ" -#: management/kmspecialprinterdlg.cpp:121 -msgid "The default extension for the output file (e.g. ps, pdf, ps.gz).
" -msgstr "ส่วนขยายปริยายของแฟ้มส่งออก(เช่น ps, pdf, ps.gz)
" +#: lpd/kmlpdmanager.cpp:244 +msgid "Unable to execute command \"%1\"." +msgstr "ไม่สามารถประมวลผลคำสั่ง \"%1\" ได้" -#: management/kmspecialprinterdlg.cpp:170 -msgid "You must provide a non-empty name." -msgstr "คุณต้องระบุชื่อก่อน" +#: lpd/kmlpdmanager.cpp:317 +msgid "Unable to write printcap file." +msgstr "ไม่สามารถเขียนเอกสาร printcap ได้" -#: management/kmspecialprinterdlg.cpp:178 -#, c-format -msgid "Invalid settings. %1." -msgstr "การตั้งค่าผิดพลาด %1" +#: lpd/kmlpdmanager.cpp:372 +msgid "Couldn't find driver %1 in printtool database." +msgstr "ไม่สามารถค้นหาไดรเวอร์ %1 บนฐานข้อมูล printtool ได้" -#: management/kmspecialprinterdlg.cpp:197 -#, c-format -msgid "Configuring %1" -msgstr "กำลังปรับแต่ง %1" +#: lpd/kmlpdmanager.cpp:411 +msgid "Couldn't find printer %1 in printcap file." +msgstr "ไม่สามารถค้นหาเครื่องพิมพ์ %1 ในเอกสาร printcap ได้" -#: management/smbview.cpp:44 -msgid "Comment" -msgstr "คำอธิบาย" +#: lpd/kmlpdmanager.cpp:440 +msgid "No driver found (raw printer)" +msgstr "ไม่พบไดรเวอร์ (เครื่องพิมพ์แบบ raw)" -#: management/kmwend.cpp:33 -msgid "Confirmation" -msgstr "การยืนยัน" +#: lpd/kmlpdmanager.cpp:442 +msgid "Printer type not recognized." +msgstr "ไม่สามารถจัดการกับชนิดของเครื่องพิมพ์ได้" -#: management/kmwend.cpp:50 management/kmwend.cpp:106 -#: management/kmwend.cpp:109 tdefilelist.cpp:102 -msgid "Type" -msgstr "ประเภท" +#: lpd/kmlpdmanager.cpp:452 +msgid "" +"The driver device %1 is not compiled in your GhostScript distribution. " +"Check your installation or use another driver." +msgstr "" +"ไดรเวอร์ของอุปกรณ์ %1 ไม่ได้ถูกคอมไพล์มาจาก GhostScript " +"ที่ติดตั้งในระบบของคุณ โปรดตรวจสอบการติดตั้ง หรือใช้ไดรเวอร์ตัวอื่น ๆ" -#: management/kmwend.cpp:52 -msgid "Location" -msgstr "ตำแหน่ง" +#: lpd/kmlpdmanager.cpp:560 +msgid "Unable to write driver associated files in spool directory." +msgstr "ไม่สามารถเขียนไปยังเอกสารไดรเวอร์ ที่กำหนดไว้ในไดเร็กทอรีงานพิมพ์ได้" -#: management/kmwend.cpp:69 -msgid "Backend" -msgstr "ประเภทเครื่องพิมพ์" +#: lpd/kmlpduimanager.cpp:44 +msgid "Local printer (parallel, serial, USB)" +msgstr "เครื่องพิมพ์แบบต่อตรง (พอร์ตขนาน, อนุกรม, USB)" -#: management/kmwend.cpp:74 -msgid "Device" -msgstr "อุปกรณ์" +#: lpd/kmlpduimanager.cpp:46 +msgid "SMB shared printer (Windows)" +msgstr "เครื่องพิมพ์แบบเครือข่าย SMB (วินโดว์ส)" -#: management/kmwend.cpp:77 -msgid "Printer IP" -msgstr "IP ของเครื่องพิมพ์" +#: lpd/kmlpduimanager.cpp:47 +msgid "Network printer (TCP)" +msgstr "เครื่องพิมพ์แบบเครือข่าย (TCP)" -#: management/kmwend.cpp:78 management/kmwend.cpp:89 -msgid "Port" -msgstr "พอร์ต" +#: lpd/kmlpduimanager.cpp:48 +msgid "File printer (print to file)" +msgstr "เครื่องพิมพ์แบบแฟ้ม (พิมพ์ออกเป็นเอกสาร)" -#: management/kmwend.cpp:81 management/kmwend.cpp:88 -msgid "Host" -msgstr "โฮสต์" +#: lpd/lpdtools.cpp:31 +msgid "A4" +msgstr "A4" -#: management/kmwend.cpp:82 rlpr/kmproprlpr.cpp:48 -msgid "Queue" -msgstr "คิว" +#: lpd/lpdtools.cpp:32 +msgid "A3" +msgstr "A3" -#: management/kmwend.cpp:91 -msgid "Account" -msgstr "บัญชีผู้ใช้" +#: lpd/lpdtools.cpp:33 +msgid "B4" +msgstr "B4" -#: management/kmwend.cpp:96 -msgid "URI" -msgstr "ตำแหน่ง URI" +#: lpd/lpdtools.cpp:34 +msgid "B5" +msgstr "B5" -#: management/kmwend.cpp:109 -msgid "DB driver" -msgstr "ฐานข้อมูลไดรเวอร์" +#: lpd/lpdtools.cpp:233 +msgid "GhostScript settings" +msgstr "ตั้งค่า GhostScript" -#: management/kmwend.cpp:109 -msgid "External driver" -msgstr "ไดรเวอร์ภายนอก" +#: lpd/lpdtools.cpp:254 +msgid "Resolution" +msgstr "ความละเอียด" -#: management/kmwend.cpp:110 -msgid "Manufacturer" -msgstr "ผู้ผลิต" +#: lpd/lpdtools.cpp:277 +msgid "Color depth" +msgstr "ความลึกสี" -#: management/kmwend.cpp:111 -msgid "Model" -msgstr "รุ่น" +#: lpd/lpdtools.cpp:301 +msgid "Additional GS options" +msgstr "ตัวเลือก GS เพิ่มเติม" -#: management/kmwdriver.cpp:33 -msgid "Printer Model Selection" -msgstr "เลือกรุ่นของเครื่องพิมพ์" +#: lpd/lpdtools.cpp:313 +msgid "Page size" +msgstr "ขนาดกระดาษ" -#: management/kmwdriver.cpp:113 -msgid "Internal error: unable to locate the driver." -msgstr "ข้อผิดพลาดภายใน: ไม่สามารถหาไดรเวอร์ได้" +#: lpd/lpdtools.cpp:329 +msgid "Pages per sheet" +msgstr "หน้าต่อหนึ่งแผ่น" -#: management/kmpropgeneral.cpp:37 -msgid "Printer name:" -msgstr "ชื่อเครื่องพิมพ์:" +#: lpd/lpdtools.cpp:345 +msgid "Left/right margin (1/72 in)" +msgstr "ขอบซ้าย/ขวา (1/72\")" + +#: lpd/lpdtools.cpp:350 +msgid "Top/bottom margin (1/72 in)" +msgstr "ขอบบน/ล่าง (1/72\")" + +#: lpd/lpdtools.cpp:356 +msgid "Text options" +msgstr "ตัวเลือกข้อความ" -#: management/kmwsmb.cpp:35 -msgid "SMB Printer Settings" -msgstr "ปรับแต่งเครื่องพิมพ์แบบ SMB" +#: lpd/lpdtools.cpp:362 +msgid "Send EOF after job to eject page" +msgstr "ส่งรหัสจบแฟ้มหลังพิมพ์เสร็จ เพื่อดันกระดาษออก" -#: management/kmwsmb.cpp:41 -msgid "Scan" -msgstr "ค้นหา" +#: lpd/lpdtools.cpp:370 +msgid "Fix stair-stepping text" +msgstr "ปรับระยะ stair-stepping ของข้อความให้คงที่" -#: management/kmwsmb.cpp:42 -msgid "Abort" -msgstr "เลิกทำ" +#: lpd/lpdtools.cpp:382 +msgid "Fast text printing (non-PS printers only)" +msgstr "พิมพ์ข้อความอย่างรวดเร็ว (เฉพาะที่ไม่ใช่เครื่องพิมพ์ PS)" -#: management/kmwsmb.cpp:44 -msgid "Workgroup:" -msgstr "กลุ่มงาน:" +#: kprinterpropertydialog.cpp:78 kprinterpropertydialog.cpp:138 +msgid "Printer Configuration" +msgstr "ปรับแต่งเครื่องพิมพ์" -#: management/kmwsmb.cpp:45 -msgid "Server:" -msgstr "เซิร์ฟเวอร์:" +#: kprinterpropertydialog.cpp:138 +msgid "No configurable options for that printer." +msgstr "ไม่มีตัวเลือกใดๆ สำหรับปรับแต่งเครื่องพิมพ์นี้" -#: management/kmwsmb.cpp:81 rlpr/kmrlprmanager.cpp:45 -msgid "Empty printer name." -msgstr "ไม่มีชื่อเครื่องพิมพ์" +#: droptionview.cpp:61 +msgid "Value:" +msgstr "ค่า:" -#: management/kmwsmb.cpp:99 -#, c-format -msgid "Login: %1" -msgstr "ล็อกอิน: %1" +#: droptionview.cpp:167 +msgid "String value:" +msgstr "ค่าของข้อความ:" -#: management/kmwsmb.cpp:99 -msgid "If you enable this option, you can print posters of different sizes The " +"printout will happen in the form 'tiles' printed on smaller paper " +"sizes, which you can stitch together later. If you enable this option " +"here, the 'Poster Printing' filter will be auto-loaded in the " +"'Filters' tab of this dialog.
" +"This tab is only visible if the external 'poster' " +"utility is discovered by TDEPrint on your system. ['poster' " +"is a commandline utility that enables you to convert PostScript files into " +"tiled printouts which allow for oversized appearance of the stitched-together " +"tiles.]
" +"Note: The standard version of 'poster' will not work. Your system " +"must use a patched version of 'poster'. Ask your operating system vendor to " +"provide a patched version of 'poster' if he does not already.
This GUI element is not only for viewing " +"your selections: it also lets you interactively select the tile(s) you want to " +"print.
" +"Hints " +"
Note 2: By default no tile is selected. Before you can print (a part " +" of) your poster, you must select at least one tile.
Select the poster size you want from the dropdown list.
" +"Available sizes are all standard paper sizes up to 'A0'. [A0 is the same size " +"as 16 sheets of A4, or '84cm x 118.2cm'.] " +"Notice, how the little preview window below changes with your change " +"of poster size. It indicates to you how many tiles need to be printed to make " +"the poster, given the selected paper size.
" +"Hint: The little preview window below is not just a passive icon. You " +"can click on its individual tiles to select them for printing. To select " +"multiple tiles to be printed at once, you need to 'shift-click' " +"on the tiles ('shift-click' means: hold down the [SHIFT]-key on your keyboard " +"and click with the mouse while [SHIFT]-key is held.) The order of your " +"clicking is significant to the order of printing the different tiles. The order " +"of your selection (and for the printed tiles) is indicated by the contents of " +"the text field labelled as 'Tile pages (to be printed):'" +"
Note: By default no tile is selected. Before you can print (a part " +"of) your poster, you must select at least one tile.
This field indicates the paper size the poster tiles will be printed on. To " +"select a different paper size for your poster tiles, go to the 'General' tab " +"of this dialog and select one from the dropdown list.
" +"Available sizes are most standard paper sizes supported by your printer. Your " +"printer's supported paper sizes are read from the printer driver info (as laid " +"down in the 'PPD', the printer description file). " +"Be aware that the 'Paper Size' selected may not be supported by 'poster' " +"(example: 'HalfLetter') while it may well be supported by your printer. " +"If you hit that obstacle, simply use another, supported Paper Size, like 'A4' " +"or 'Letter'. " +"Notice, how the little preview window below changes with your change " +"of paper size. It indicates how many tiles need to be printed to make up the " +"poster, given the selected paper and poster size.
" +"Hint: The little preview window below is not just a passive icon. You " +"can click on its individual tiles to select them for printing. To select " +"multiple tiles to be printed at once, you need to 'shift-click' " +"on the tiles ('shift-click' means: hold down the [SHIFT]-key on your keyboard " +"and click with the mouse while [SHIFT]-key is held.) The order of your " +"clicking is significant to the order of printing the different tiles. The order " +"of your selection (and for the printed tiles) is indicated by the contents of " +"the text field labelled as 'Tile pages (to be printed):'" +"
Note: By default no tile is selected. Before you can print (a part " +"of) your poster, you must select at least one tile.
Slider and spinbox let you determine a 'cut margin' " +"which will be printed onto each tile of your poster to help you cut the pieces " +"as needed.
" +"Notice, how the little preview window above changes with your change " +"of cut margins. It indicates to you how much space the cut margins will take " +"away from each tile. " +"
Be aware, that your cut margins need to be equal to or greater than " +"the margins your printer uses. The printer's capabilities are described in the " +"'ImageableArea' keywords of its driver PPD file.
This field displays and sets the individual tiles to be printed, as well as " +"the order for their printout.
You can file the field with 2 different " +"methods: " +"When editing the field, you can use a '3-7' syntax instead of a '3,4,5,6,7' " +"one.
" +"Examples:
" +"\"2,3,7,9,3\" " +"
\"1-3,6,8-11\"
\"General\"
" -"This dialog page contains general print job settings. General " -"settings are applicable to most printers, most jobs and most job file types. " -"
To get more specific help, enable the \"WhatsThis\" cursor and click on any " -"of the text labels or GUI elements of this dialog.
Page size: Select paper size to be printed on from the drop-down " -"menu.
" -"The exact list of choices depends on the printer driver (\"PPD\") you have " -"installed.
" -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o PageSize=... # examples: \"A4\" or \"Letter\"" -"
Paper type: Select paper type to be printed on from the drop-down " -"menu.
" -"The exact list of choices depends on the printer driver (\"PPD\") you have " -"installed.
" -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o MediaType=... # example: \"Transparency\"
Paper source: Select paper source tray for the paper to be printed on " -"from the drop-down menu. " -"
The exact list of choices depends on the printer driver (\"PPD\") you have " -"installed.
" -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o InputSlot=... # examples: \"Lower\" or \"LargeCapacity\" " -"
Image Orientation: Orientation of the printed page image on your " -"paper is controlled by the radio buttons. By default, the orientation is " -"Portrait " -"
You can select 4 alternatives: " -"
Top Margin
. " +"This spinbox/text edit field lets you control the top margin of your " +"printout if the printing application does not define its margins internally. " +"
" +"The setting works for instance for ASCII text file printing, or for printing " +"from KMail and and Konqueror..
" +"Note:
This margin setting is not intended for KOffice or " +"OpenOffice.org printing, because these applications (or rather their users) " +"are expected to do it by themselves. It also does not work for PostScript or " +"PDF file, which in most cases have their margins hardcoded internally. " "Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " -"
-o orientation-requested=... # examples: \"landscape\" or " -"\"reverse-portrait\"
-o page-top=... # use values from \"0\" or higher. \"72\" is " +"equal to 1 inch." msgstr "" -#: kpgeneralpage.cpp:192 +#: marginwidget.cpp:57 msgid "" "
Duplex Printing: These controls may be grayed out if your printer " -"does not support duplex printing (i.e. printing on both sides of the " -"sheet). These controls are active if your printer supports duplex printing. " -"
You can choose from 3 alternatives:
" -"Bottom Margin
. " +"This spinbox/text edit field lets you control the bottom margin of your " +"printout if the printing application does not define its margins internally. " +"
" +"The setting works for instance for ASCII text file printing, or for printing " +"from KMail and and Konqueror.
" +"Note:
This margin setting is not intended for KOffice or " +"OpenOffice.org printing, because these applications (or rather their users) " +"are expected to do it by themselves. It also does not work for PostScript or " +"PDF file, which in most cases have their margins hardcoded internally. " +"Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " -"
-o duplex=... # examples: \"tumble\" or \"two-sided-short-edge\" " -"
-o page-bottom=... # use values from \"0\" or higher. \"72\" is " +"equal to 1 inch." msgstr "" -#: kpgeneralpage.cpp:218 +#: marginwidget.cpp:76 msgid "" "
Banner Page(s): Select banner(s) to print one or two special sheets " -"of paper just before or after your main job.
" -"Banners may contain some pieces of job information, such as user name, time " -"of printing, job title and more.
" -"Banner pages are useful to separate different jobs more easily, especially " -"in a multi-user environment.
" -"Hint: You can design your own banner pages. To make use of " -"them, just put the banner file into the standard CUPS banners " -"directory (This is usually \"/usr/share/cups/banner/\" " -"Your custom banner(s) must have one of the supported printable formats. " -"Supported formats are ASCII text, PostScript, PDF and nearly any image format " -"such as PNG, JPEG or GIF. Your added banner pages will appear in the drop down " -"menu after a restart of CUPS.
" -"CUPS comes with a selection of banner pages.
" +"Left Margin
. " +"This spinbox/text edit field lets you control the left margin of your " +"printout if the printing application does not define its margins internally. " +"
" +"The setting works for instance for ASCII text file printing, or for printing " +"from KMail and and Konqueror.
" +"Note:
This margin setting is not intended for KOffice or " +"OpenOffice.org printing, because these applications (or rather their users) " +"are expected to do it by themselves. It also does not work for PostScript or " +"PDF file, which in most cases have their margins hardcoded internally. " "Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " -"
-o job-sheets=... # examples: \"standard\" or \"topsecret\" " -"
-o page-left=... # use values from \"0\" or higher. \"72\" is " +"equal to 1 inch." msgstr "" -#: kpgeneralpage.cpp:240 +#: marginwidget.cpp:95 msgid "" "
Pages per Sheet: You can choose to print more than one page onto " -"each sheet of paper. This is sometimes useful to save paper.
" -"Note 1: the page images get scaled down accordingly to print 2 or 4 " -"pages per sheet. The page image does not get scaled if you print 1 page per " -"sheet (the default setting.). " -"
Note 2: If you select multiple pages per sheet here, the scaling and " -"re-arranging is done by your printing system. Be aware, that some printers can " -"by themselves print multiple pages per sheet. In this case you find the option " -"in the printer driver settings. Be careful: if you enable multiple pages per " -"sheet in both places, your printout will not look as you intended.
" +"Right Margin
. " +"This spinbox/text edit field lets you control the right margin of your " +"printout if the printing application does not define its margins internally. " +"
" +"The setting works for instance for ASCII text file printing, or for printing " +"from KMail and and Konqueror.
" +"Note:
This margin setting is not intended for KOffice or " +"OpenOffice.org printing, because these applications (or rather their users) " +"are expected to do it by themselves. It also does not work for PostScript or " +"PDF file, which in most cases have their margins hardcoded internally. " "Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o number-up=... # examples: \"2\" or \"4\"
Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o page-right=... # use values from \"0\" or higher. \"72\" is " +"equal to 1 inch." msgstr "" -#: kpqtpage.cpp:79 +#: marginwidget.cpp:114 msgid "" -"
The exact list of choices depends on the printer driver (\"PPD\") you have " -"installed.
Change Measurement Unit
. " +"You can change the units of measurement for the page margins here. Select " +"from Millimeter, Centimeter, Inch or Pixels (1 pixel == 1/72 inch).
เปลี่ยนหน่วยวัด
" +"คุณสามารถเปลี่ยนหน่วยวัดสำหรับขอบหน้าได้ที่นี่ เลือกจาก มิลลิเมตร, " +"เซนติเมตร, นิ้ว หรือ พิกเซล (1 พิกเซล == 1/72 นิ้ว)
Note 1: the page images get scaled down accordingly to print 2 or 4 " -"pages per sheet. The page image does not get scaled if you print 1 page per " -"sheet (the default setting.). " -"
Note 2: If you select multiple pages per sheet here, the scaling and " -"re-arranging is done by your printing system. " -"
Note 3, regarding \"Other\": You cannot really select Other " -"as the number of pages to print on one sheet.\"Other\" is checkmarked here for " -"information purposes only. " -"
To select 8, 9, 16 or other numbers of pages per sheet: "
+" Custom Margins Checkbox Enable this checkbox if you want to modify the margins of your printouts "
+" You can change margin settings in 4 ways: "
" "
-"
You can select 2 alternatives: " -"
\"Drag-your-Margins\"
. " +"Use your mouse to drag and set each margin on this little preview window. " +"
\"ลากขอบของคุณ\"
" +"ใช้เม้าส์ลากและตั้งค่าขอบแต่ละขอบในหน้าต่างแสดงตัวอย่างเล็กๆ นี้
If you enable this option, you can print posters of different sizes The " -"printout will happen in the form 'tiles' printed on smaller paper " -"sizes, which you can stitch together later. If you enable this option " -"here, the 'Poster Printing' filter will be auto-loaded in the " -"'Filters' tab of this dialog.
" -"This tab is only visible if the external 'poster' " -"utility is discovered by TDEPrint on your system. ['poster' " -"is a commandline utility that enables you to convert PostScript files into " -"tiled printouts which allow for oversized appearance of the stitched-together " -"tiles.]
" -"Note: The standard version of 'poster' will not work. Your system " -"must use a patched version of 'poster'. Ask your operating system vendor to " -"provide a patched version of 'poster' if he does not already.
This GUI element is not only for viewing " -"your selections: it also lets you interactively select the tile(s) you want to " -"print.
" -"Hints " -"
Note 2: By default no tile is selected. Before you can print (a part " -" of) your poster, you must select at least one tile.
Select the poster size you want from the dropdown list.
" -"Available sizes are all standard paper sizes up to 'A0'. [A0 is the same size " -"as 16 sheets of A4, or '84cm x 118.2cm'.] " -"Notice, how the little preview window below changes with your change " -"of poster size. It indicates to you how many tiles need to be printed to make " -"the poster, given the selected paper size.
" -"Hint: The little preview window below is not just a passive icon. You " -"can click on its individual tiles to select them for printing. To select " -"multiple tiles to be printed at once, you need to 'shift-click' " -"on the tiles ('shift-click' means: hold down the [SHIFT]-key on your keyboard " -"and click with the mouse while [SHIFT]-key is held.) The order of your " -"clicking is significant to the order of printing the different tiles. The order " -"of your selection (and for the printed tiles) is indicated by the contents of " -"the text field labelled as 'Tile pages (to be printed):'" -"
Note: By default no tile is selected. Before you can print (a part " -"of) your poster, you must select at least one tile.
This field indicates the paper size the poster tiles will be printed on. To " -"select a different paper size for your poster tiles, go to the 'General' tab " -"of this dialog and select one from the dropdown list.
" -"Available sizes are most standard paper sizes supported by your printer. Your " -"printer's supported paper sizes are read from the printer driver info (as laid " -"down in the 'PPD', the printer description file). " -"Be aware that the 'Paper Size' selected may not be supported by 'poster' " -"(example: 'HalfLetter') while it may well be supported by your printer. " -"If you hit that obstacle, simply use another, supported Paper Size, like 'A4' " -"or 'Letter'. " -"Notice, how the little preview window below changes with your change " -"of paper size. It indicates how many tiles need to be printed to make up the " -"poster, given the selected paper and poster size.
" -"Hint: The little preview window below is not just a passive icon. You " -"can click on its individual tiles to select them for printing. To select " -"multiple tiles to be printed at once, you need to 'shift-click' " -"on the tiles ('shift-click' means: hold down the [SHIFT]-key on your keyboard " -"and click with the mouse while [SHIFT]-key is held.) The order of your " -"clicking is significant to the order of printing the different tiles. The order " -"of your selection (and for the printed tiles) is indicated by the contents of " -"the text field labelled as 'Tile pages (to be printed):'" -"
Note: By default no tile is selected. Before you can print (a part " -"of) your poster, you must select at least one tile.
Slider and spinbox let you determine a 'cut margin' " -"which will be printed onto each tile of your poster to help you cut the pieces " -"as needed.
" -"Notice, how the little preview window above changes with your change " -"of cut margins. It indicates to you how much space the cut margins will take " -"away from each tile. " -"
Be aware, that your cut margins need to be equal to or greater than " -"the margins your printer uses. The printer's capabilities are described in the " -"'ImageableArea' keywords of its driver PPD file.
This field displays and sets the individual tiles to be printed, as well as " -"the order for their printout.
You can file the field with 2 different " -"methods: " -"When editing the field, you can use a '3-7' syntax instead of a '3,4,5,6,7' " -"one.
" -"Examples:
" -"\"2,3,7,9,3\" " -"
\"1-3,6,8-11\"
The upper pane of this dialog page contains all printjob options as laid " -"down in the printer's description file (PostScript Printer Description == " -"'PPD')
" -"Click on any item in the list and watch the lower pane of this dialog page " -"display the available values.
" -"Set the values as needed. Then use one of the pushbuttons below to " -"proceed:
" -"Note. The number of available job options depends strongly on the " -"actual driver used for your print queue. 'Raw' " -"queues do not have a driver or a PPD. For raw queues this tab page is not " -"loaded by TDEPrint, and thus is not present in the kprinter dialog.
The lower pane of this dialog page contains all possible values of the " -"printoption highlighted above, as laid down in the printer's description file " -"(PostScript Printer Description == 'PPD')
" -"Select the value you want and proceed.
" -"Then use one of the pushbuttons below to leave this dialog:
" -"Note. The number of available job options depends strongly on the " -"actual driver used for your print queue. 'Raw' " -"queues do not have a driver or a PPD. For raw queues this tab page is not " -"loaded by TDEPrint, and thus is not present in the kprinter dialog.
This combo box shows (and lets you select) a print subsystem to be used by " -"TDEPrint. (This print subsystem must, of course, be installed inside your " -"Operating System.) TDEPrint usually auto-detects the correct print subsystem by " -"itself upon first startup. Most Linux distributions have \"CUPS\", the " -"Common UNIX Printing System.
This line shows which CUPS server your PC is currently connected to for " -"printing and retrieving printer info. To switch to a different CUPS server, " -"click \"System Options\", then select \"Cups server\" and fill in the required " -"info.
ลากเอกสารมายังที่นี่ หรือใช้ปุ่มเพื่อเรียกกล่องเอกสาร และให้ " "<STDIN> ว่าง
" -#: droptionview.cpp:61 -msgid "Value:" -msgstr "ค่า:" - -#: droptionview.cpp:167 -msgid "String value:" -msgstr "ค่าของข้อความ:" - -#: droptionview.cpp:306 droptionview.cpp:341 -msgid "No Option Selected" -msgstr "ไม่มีตัวเลือกใดถูกเลือก" - -#: lpd/kmlpduimanager.cpp:44 -msgid "Local printer (parallel, serial, USB)" -msgstr "เครื่องพิมพ์แบบต่อตรง (พอร์ตขนาน, อนุกรม, USB)" - -#: lpd/kmlpduimanager.cpp:46 -msgid "SMB shared printer (Windows)" -msgstr "เครื่องพิมพ์แบบเครือข่าย SMB (วินโดว์ส)" - -#: lpd/kmlpduimanager.cpp:47 -msgid "Network printer (TCP)" -msgstr "เครื่องพิมพ์แบบเครือข่าย (TCP)" - -#: lpd/kmlpduimanager.cpp:48 -msgid "File printer (print to file)" -msgstr "เครื่องพิมพ์แบบแฟ้ม (พิมพ์ออกเป็นเอกสาร)" - -#: lpd/lpdtools.cpp:31 -msgid "A4" -msgstr "A4" - -#: lpd/lpdtools.cpp:32 -msgid "A3" -msgstr "A3" - -#: lpd/lpdtools.cpp:33 -msgid "B4" -msgstr "B4" - -#: lpd/lpdtools.cpp:34 -msgid "B5" -msgstr "B5" - -#: lpd/lpdtools.cpp:233 -msgid "GhostScript settings" -msgstr "ตั้งค่า GhostScript" - -#: lpd/lpdtools.cpp:254 -msgid "Resolution" -msgstr "ความละเอียด" - -#: lpd/lpdtools.cpp:277 -msgid "Color depth" -msgstr "ความลึกสี" - -#: lpd/lpdtools.cpp:301 -msgid "Additional GS options" -msgstr "ตัวเลือก GS เพิ่มเติม" - -#: lpd/lpdtools.cpp:313 -msgid "Page size" -msgstr "ขนาดกระดาษ" - -#: lpd/lpdtools.cpp:329 -msgid "Pages per sheet" -msgstr "หน้าต่อหนึ่งแผ่น" - -#: lpd/lpdtools.cpp:345 -msgid "Left/right margin (1/72 in)" -msgstr "ขอบซ้าย/ขวา (1/72\")" - -#: lpd/lpdtools.cpp:350 -msgid "Top/bottom margin (1/72 in)" -msgstr "ขอบบน/ล่าง (1/72\")" - -#: lpd/lpdtools.cpp:356 -msgid "Text options" -msgstr "ตัวเลือกข้อความ" - -#: lpd/lpdtools.cpp:362 -msgid "Send EOF after job to eject page" -msgstr "ส่งรหัสจบแฟ้มหลังพิมพ์เสร็จ เพื่อดันกระดาษออก" - -#: lpd/lpdtools.cpp:370 -msgid "Fix stair-stepping text" -msgstr "ปรับระยะ stair-stepping ของข้อความให้คงที่" - -#: lpd/lpdtools.cpp:382 -msgid "Fast text printing (non-PS printers only)" -msgstr "พิมพ์ข้อความอย่างรวดเร็ว (เฉพาะที่ไม่ใช่เครื่องพิมพ์ PS)" - -#: lpd/kmlpdmanager.cpp:87 -msgid "Local printer queue (%1)" -msgstr "คิวของเครื่องพิมพ์ภายใน (%1)" - -#: lpd/kmlpdmanager.cpp:87 -msgid "" -"_: Unknown type of local printer queue\n" -"Unknown" -msgstr "ไม่รู้จัก" - -#: lpd/kmlpdmanager.cpp:88 -msgid "This button calls a little dialog to let you select a filter here.
" -"Note 1: You can chain different filters as long as you make sure " -"that the output of one fits as input of the next. (TDEPrint checks your " -"filtering chain and will warn you if you fail to do so.
" -"Note 2: The filters you define here are applied to your jobfile " -"before it is handed downstream to your spooler and print subsystem " -"(e.g. CUPS, LPRng, LPD).
This button removes the highlighted filter from the list of filters.
The upper pane of this dialog page contains all printjob options as laid " +"down in the printer's description file (PostScript Printer Description == " +"'PPD')
" +"Click on any item in the list and watch the lower pane of this dialog page " +"display the available values.
" +"Set the values as needed. Then use one of the pushbuttons below to " +"proceed:
" +"Note. The number of available job options depends strongly on the " +"actual driver used for your print queue. 'Raw' " +"queues do not have a driver or a PPD. For raw queues this tab page is not " +"loaded by TDEPrint, and thus is not present in the kprinter dialog.
ปุ่มนี้จะลบตัวกรองที่อยู่ในแถบสีออกจากรายการของตัวกรอง
This button moves the highlighted filter up in the list of filters, towards " -"the front of the filtering chain.
The lower pane of this dialog page contains all possible values of the " +"printoption highlighted above, as laid down in the printer's description file " +"(PostScript Printer Description == 'PPD')
" +"Select the value you want and proceed.
" +"Then use one of the pushbuttons below to leave this dialog:
" +"Note. The number of available job options depends strongly on the " +"actual driver used for your print queue. 'Raw' " +"queues do not have a driver or a PPD. For raw queues this tab page is not " +"loaded by TDEPrint, and thus is not present in the kprinter dialog.
ปุ่มนี้จะย้ายตัวกรองที่อยู่ในแถบสีขึ้นไปข้างหน้าของรายการตัวกรอง
This button moves the highlighted filter down in the list of filters, " -"towards the end of the filtering chain..
ปุ่มนี้จะย้ายตัวกรองที่อยู่ในแถบสีลงไปด้านท้ายของรายการตัวกรอง
This button lets you configure the currently highlighted filter. It opens a " -"separate dialog.
%2
%2
This field shows some general info about the selected filter. Amongst them " -"are: " -"
This field shows which filters are currently selected to act as " -"'pre-filters' for TDEPrint. Pre-filters are processing the print files " -"before they are send downstream to your real print subsystem.
" -"The list shown in this field may be empty (default).
" -"The pre-filters act on the printjob in the order they are listed (from top " -"to bottom). This is done by acting as a filtering chain " -"where the output of one filter acts as input to the next. By putting the " -"filters into the wrong order, you can make the filtering chain fail. For " -"example: if your file is ASCII text, and you want the output being processed " -"by the 'Multipage per Sheet' filter, the first filter must be one that " -"processes ASCII into PostScript.
" -"TDEPrint can utilize any external filtering program which you may " -"find useful through this interface.
" -"TDEPrint ships preconfigured with support for a selection of common filters. " -"These filters however need to be installed independently from TDEPrint. These " -"pre-filters work for all print subsystems supported by TDEPrint (such " -"as CUPS, LPRng and LPD), because they are not depending on these.
." -"Amongst the pre-configured filters shipping with TDEPrint are:
" -"Please click on the other elements of this dialog to learn more about the " -"TDEPrint pre-filters.
The filter chain is wrong. The output format of at least one filter is not " -"supported by its follower. See Filters tab for more information.
" -msgstr "" -"สายโซ่ตัวกรองไม่ถูกต้อง รูปแบบการแสดงผลอย่างน้อยหนึ่งตัวกรอง " -"ไม่ได้สนับสนุนโดยตัวมันเอง ดูที่แท็บ ตัวกรอง สำหรับรายละเอียด
" +#: tdeprintd.cpp:263 +msgid "Printing system" +msgstr "ระบบการพิมพ์" -#: kpfilterpage.cpp:408 -msgid "Input" -msgstr "นำเข้า" +#: tdeprintd.cpp:266 +msgid "Authentication failed (user name=%1)" +msgstr "การตรวจสอบสิทธิ์ล้มเหลว (ชื่อผู้ใช้=%1)" #~ msgid "%1 &Handbook" #~ msgstr "คู่มือ %1" -- cgit v1.2.1