From 1413e96a065cfce9c02588768b3d204a45ce86e6 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Sl=C3=A1vek=20Banko?= Date: Fri, 20 Nov 2020 00:56:19 +0100 Subject: Drop automake build support. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Slávek Banko --- tde-i18n-uz@cyrillic/Makefile.am | 4 - tde-i18n-uz@cyrillic/acinclude.m4 | 5969 -------------------- tde-i18n-uz@cyrillic/aclocal.m4 | 602 -- tde-i18n-uz@cyrillic/admin | 1 - tde-i18n-uz@cyrillic/config.h.in | 25 - tde-i18n-uz@cyrillic/configure.files | 1 - tde-i18n-uz@cyrillic/configure.in | 79 - tde-i18n-uz@cyrillic/install-sh | 394 -- tde-i18n-uz@cyrillic/messages/Makefile.am | 3 - .../messages/tdeaccessibility/Makefile.am | 3 - .../messages/tdeaddons/Makefile.am | 3 - tde-i18n-uz@cyrillic/messages/tdeadmin/Makefile.am | 3 - .../messages/tdeartwork/Makefile.am | 3 - tde-i18n-uz@cyrillic/messages/tdebase/Makefile.am | 3 - tde-i18n-uz@cyrillic/messages/tdeedu/Makefile.am | 3 - tde-i18n-uz@cyrillic/messages/tdegames/Makefile.am | 3 - .../messages/tdegraphics/Makefile.am | 3 - tde-i18n-uz@cyrillic/messages/tdelibs/Makefile.am | 3 - .../messages/tdemultimedia/Makefile.am | 3 - .../messages/tdenetwork/Makefile.am | 3 - tde-i18n-uz@cyrillic/messages/tdepim/Makefile.am | 3 - tde-i18n-uz@cyrillic/messages/tdesdk/Makefile.am | 3 - tde-i18n-uz@cyrillic/messages/tdetoys/Makefile.am | 3 - tde-i18n-uz@cyrillic/messages/tdeutils/Makefile.am | 3 - tde-i18n-uz@cyrillic/messages/tdevelop/Makefile.am | 3 - tde-i18n-uz@cyrillic/missing | 346 -- tde-i18n-uz@cyrillic/mkinstalldirs | 149 - tde-i18n-uz@cyrillic/stamp-h.in | 0 28 files changed, 7621 deletions(-) delete mode 100644 tde-i18n-uz@cyrillic/Makefile.am delete mode 100644 tde-i18n-uz@cyrillic/acinclude.m4 delete mode 100644 tde-i18n-uz@cyrillic/aclocal.m4 delete mode 120000 tde-i18n-uz@cyrillic/admin delete mode 100644 tde-i18n-uz@cyrillic/config.h.in delete mode 100644 tde-i18n-uz@cyrillic/configure.files delete mode 100644 tde-i18n-uz@cyrillic/configure.in delete mode 100755 tde-i18n-uz@cyrillic/install-sh delete mode 100644 tde-i18n-uz@cyrillic/messages/Makefile.am delete mode 100644 tde-i18n-uz@cyrillic/messages/tdeaccessibility/Makefile.am delete mode 100644 tde-i18n-uz@cyrillic/messages/tdeaddons/Makefile.am delete mode 100644 tde-i18n-uz@cyrillic/messages/tdeadmin/Makefile.am delete mode 100644 tde-i18n-uz@cyrillic/messages/tdeartwork/Makefile.am delete mode 100644 tde-i18n-uz@cyrillic/messages/tdebase/Makefile.am delete mode 100644 tde-i18n-uz@cyrillic/messages/tdeedu/Makefile.am delete mode 100644 tde-i18n-uz@cyrillic/messages/tdegames/Makefile.am delete mode 100644 tde-i18n-uz@cyrillic/messages/tdegraphics/Makefile.am delete mode 100644 tde-i18n-uz@cyrillic/messages/tdelibs/Makefile.am delete mode 100644 tde-i18n-uz@cyrillic/messages/tdemultimedia/Makefile.am delete mode 100644 tde-i18n-uz@cyrillic/messages/tdenetwork/Makefile.am delete mode 100644 tde-i18n-uz@cyrillic/messages/tdepim/Makefile.am delete mode 100644 tde-i18n-uz@cyrillic/messages/tdesdk/Makefile.am delete mode 100644 tde-i18n-uz@cyrillic/messages/tdetoys/Makefile.am delete mode 100644 tde-i18n-uz@cyrillic/messages/tdeutils/Makefile.am delete mode 100644 tde-i18n-uz@cyrillic/messages/tdevelop/Makefile.am delete mode 100755 tde-i18n-uz@cyrillic/missing delete mode 100755 tde-i18n-uz@cyrillic/mkinstalldirs delete mode 100644 tde-i18n-uz@cyrillic/stamp-h.in (limited to 'tde-i18n-uz@cyrillic') diff --git a/tde-i18n-uz@cyrillic/Makefile.am b/tde-i18n-uz@cyrillic/Makefile.am deleted file mode 100644 index 8446b25d368..00000000000 --- a/tde-i18n-uz@cyrillic/Makefile.am +++ /dev/null @@ -1,4 +0,0 @@ -#created by autogen.sh -SUBDIRS = messages -AUTOMAKE_OPTIONS = foreign - diff --git a/tde-i18n-uz@cyrillic/acinclude.m4 b/tde-i18n-uz@cyrillic/acinclude.m4 deleted file mode 100644 index ebe7978ffa0..00000000000 --- a/tde-i18n-uz@cyrillic/acinclude.m4 +++ /dev/null @@ -1,5969 +0,0 @@ -## -*- autoconf -*- - -dnl This file is part of the KDE libraries/packages -dnl Copyright (C) 1997 Janos Farkas (chexum@shadow.banki.hu) -dnl (C) 1997,98,99 Stephan Kulow (coolo@kde.org) - -dnl This file is free software; you can redistribute it and/or -dnl modify it under the terms of the GNU Library General Public -dnl License as published by the Free Software Foundation; either -dnl version 2 of the License, or (at your option) any later version. - -dnl This library is distributed in the hope that it will be useful, -dnl but WITHOUT ANY WARRANTY; without even the implied warranty of -dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -dnl Library General Public License for more details. - -dnl You should have received a copy of the GNU Library General Public License -dnl along with this library; see the file COPYING.LIB. If not, write to -dnl the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, -dnl Boston, MA 02110-1301, USA. - -dnl IMPORTANT NOTE: -dnl Please do not modify this file unless you expect your modifications to be -dnl carried into every other module in the repository. -dnl -dnl Single-module modifications are best placed in configure.in for tdelibs -dnl and tdebase or configure.in.in if present. - -# KDE_PATH_X_DIRECT -dnl Internal subroutine of AC_PATH_X. -dnl Set ac_x_includes and/or ac_x_libraries. -AC_DEFUN([KDE_PATH_X_DIRECT], -[ -AC_REQUIRE([KDE_CHECK_LIB64]) - -if test "$ac_x_includes" = NO; then - # Guess where to find include files, by looking for this one X11 .h file. - test -z "$x_direct_test_include" && x_direct_test_include=X11/Intrinsic.h - - # First, try using that file with no special directory specified. -AC_TRY_CPP([#include <$x_direct_test_include>], -[# We can compile using X headers with no special include directory. -ac_x_includes=], -[# Look for the header file in a standard set of common directories. -# Check X11 before X11Rn because it is often a symlink to the current release. - for ac_dir in \ - /usr/X11/include \ - /usr/X11R6/include \ - /usr/X11R5/include \ - /usr/X11R4/include \ - \ - /usr/include/X11 \ - /usr/include/X11R6 \ - /usr/include/X11R5 \ - /usr/include/X11R4 \ - \ - /usr/local/X11/include \ - /usr/local/X11R6/include \ - /usr/local/X11R5/include \ - /usr/local/X11R4/include \ - \ - /usr/local/include/X11 \ - /usr/local/include/X11R6 \ - /usr/local/include/X11R5 \ - /usr/local/include/X11R4 \ - \ - /usr/X386/include \ - /usr/x386/include \ - /usr/XFree86/include/X11 \ - \ - /usr/include \ - /usr/local/include \ - /usr/unsupported/include \ - /usr/athena/include \ - /usr/local/x11r5/include \ - /usr/lpp/Xamples/include \ - \ - /usr/openwin/include \ - /usr/openwin/share/include \ - ; \ - do - if test -r "$ac_dir/$x_direct_test_include"; then - ac_x_includes=$ac_dir - break - fi - done]) -fi # $ac_x_includes = NO - -if test "$ac_x_libraries" = NO; then - # Check for the libraries. - - test -z "$x_direct_test_library" && x_direct_test_library=Xt - test -z "$x_direct_test_function" && x_direct_test_function=XtMalloc - - # See if we find them without any special options. - # Don't add to $LIBS permanently. - ac_save_LIBS="$LIBS" - LIBS="-l$x_direct_test_library $LIBS" -AC_TRY_LINK([#include ], [${x_direct_test_function}(1)], -[LIBS="$ac_save_LIBS" -# We can link X programs with no special library path. -ac_x_libraries=], -[LIBS="$ac_save_LIBS" -# First see if replacing the include by lib works. -# Check X11 before X11Rn because it is often a symlink to the current release. -for ac_dir in `echo "$ac_x_includes" | sed s/include/lib${tdelibsuff}/` \ - /usr/X11/lib${tdelibsuff} \ - /usr/X11R6/lib${tdelibsuff} \ - /usr/X11R5/lib${tdelibsuff} \ - /usr/X11R4/lib${tdelibsuff} \ - \ - /usr/lib${tdelibsuff}/X11 \ - /usr/lib${tdelibsuff}/X11R6 \ - /usr/lib${tdelibsuff}/X11R5 \ - /usr/lib${tdelibsuff}/X11R4 \ - \ - /usr/local/X11/lib${tdelibsuff} \ - /usr/local/X11R6/lib${tdelibsuff} \ - /usr/local/X11R5/lib${tdelibsuff} \ - /usr/local/X11R4/lib${tdelibsuff} \ - \ - /usr/local/lib${tdelibsuff}/X11 \ - /usr/local/lib${tdelibsuff}/X11R6 \ - /usr/local/lib${tdelibsuff}/X11R5 \ - /usr/local/lib${tdelibsuff}/X11R4 \ - \ - /usr/X386/lib${tdelibsuff} \ - /usr/x386/lib${tdelibsuff} \ - /usr/XFree86/lib${tdelibsuff}/X11 \ - \ - /usr/lib${tdelibsuff} \ - /usr/local/lib${tdelibsuff} \ - /usr/unsupported/lib${tdelibsuff} \ - /usr/athena/lib${tdelibsuff} \ - /usr/local/x11r5/lib${tdelibsuff} \ - /usr/lpp/Xamples/lib${tdelibsuff} \ - /lib/usr/lib${tdelibsuff}/X11 \ - \ - /usr/openwin/lib${tdelibsuff} \ - /usr/openwin/share/lib${tdelibsuff} \ - ; \ -do -dnl Don't even attempt the hair of trying to link an X program! - for ac_extension in a so sl; do - if test -r $ac_dir/lib${x_direct_test_library}.$ac_extension; then - ac_x_libraries=$ac_dir - break 2 - fi - done -done]) -fi # $ac_x_libraries = NO -]) - - -dnl ------------------------------------------------------------------------ -dnl Find a file (or one of more files in a list of dirs) -dnl ------------------------------------------------------------------------ -dnl -AC_DEFUN([AC_FIND_FILE], -[ -$3=NO -for i in $2; -do - for j in $1; - do - echo "configure: __oline__: $i/$j" >&AC_FD_CC - if test -r "$i/$j"; then - echo "taking that" >&AC_FD_CC - $3=$i - break 2 - fi - done -done -]) - -dnl KDE_FIND_PATH(program-name, variable-name, list-of-dirs, -dnl if-not-found, test-parameter, prepend-path) -dnl -dnl Look for program-name in list-of-dirs+$PATH. -dnl If prepend-path is set, look in $PATH+list-of-dirs instead. -dnl If found, $variable-name is set. If not, if-not-found is evaluated. -dnl test-parameter: if set, the program is executed with this arg, -dnl and only a successful exit code is required. -AC_DEFUN([KDE_FIND_PATH], -[ - AC_MSG_CHECKING([for $1]) - if test -n "$$2"; then - kde_cv_path="$$2"; - else - kde_cache=`echo $1 | sed 'y%./+-%__p_%'` - - AC_CACHE_VAL(kde_cv_path_$kde_cache, - [ - kde_cv_path="NONE" - kde_save_IFS=$IFS - IFS=':' - dirs="" - for dir in $PATH; do - dirs="$dirs $dir" - done - if test -z "$6"; then dnl Append dirs in PATH (default) - dirs="$3 $dirs" - else dnl Prepend dirs in PATH (if 6th arg is set) - dirs="$dirs $3" - fi - IFS=$kde_save_IFS - - for dir in $dirs; do - if test -x "$dir/$1"; then - if test -n "$5" - then - evalstr="$dir/$1 $5 2>&1 " - if eval $evalstr; then - kde_cv_path="$dir/$1" - break - fi - else - kde_cv_path="$dir/$1" - break - fi - fi - done - - eval "kde_cv_path_$kde_cache=$kde_cv_path" - - ]) - - eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\"" - - fi - - if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then - AC_MSG_RESULT(not found) - $4 - else - AC_MSG_RESULT($kde_cv_path) - $2=$kde_cv_path - - fi -]) - -AC_DEFUN([KDE_MOC_ERROR_MESSAGE], -[ - AC_MSG_ERROR([No Qt meta object compiler (moc) found! -Please check whether you installed Qt correctly. -You need to have a running moc binary. -configure tried to run $ac_cv_path_moc and the test didn't -succeed. If configure shouldn't have tried this one, set -the environment variable MOC to the right one before running -configure. -]) -]) - -AC_DEFUN([KDE_UIC_ERROR_MESSAGE], -[ - AC_MSG_WARN([No Qt ui compiler (uic) found! -Please check whether you installed Qt correctly. -You need to have a running uic binary. -configure tried to run $ac_cv_path_uic and the test didn't -succeed. If configure shouldn't have tried this one, set -the environment variable UIC to the right one before running -configure. -]) -]) - - -AC_DEFUN([KDE_CHECK_UIC_FLAG], -[ - AC_MSG_CHECKING([whether uic supports -$1 ]) - kde_cache=`echo $1 | sed 'y% .=/+-%____p_%'` - AC_CACHE_VAL(kde_cv_prog_uic_$kde_cache, - [ - cat >conftest.ui < -EOT - ac_uic_testrun="$UIC_PATH -$1 $2 conftest.ui >/dev/null" - if AC_TRY_EVAL(ac_uic_testrun); then - eval "kde_cv_prog_uic_$kde_cache=yes" - else - eval "kde_cv_prog_uic_$kde_cache=no" - fi - rm -f conftest* - ]) - - if eval "test \"`echo '$kde_cv_prog_uic_'$kde_cache`\" = yes"; then - AC_MSG_RESULT([yes]) - : - $3 - else - AC_MSG_RESULT([no]) - : - $4 - fi -]) - - -dnl ------------------------------------------------------------------------ -dnl Find the meta object compiler and the ui compiler in the PATH, -dnl in $TQTDIR/bin, and some more usual places -dnl ------------------------------------------------------------------------ -dnl -AC_DEFUN([AC_PATH_TQT_MOC_UIC], -[ - AC_REQUIRE([KDE_CHECK_PERL]) - qt_bindirs="" - for dir in $kde_qt_dirs; do - qt_bindirs="$qt_bindirs $dir/bin $dir/src/moc" - done - qt_bindirs="$qt_bindirs /usr/bin /usr/X11R6/bin /usr/local/qt/bin" - if test ! "$ac_qt_bindir" = "NO"; then - qt_bindirs="$ac_qt_bindir $qt_bindirs" - fi - - KDE_FIND_PATH(moc, MOC, [$qt_bindirs], [KDE_MOC_ERROR_MESSAGE]) - if test -z "$UIC_NOT_NEEDED"; then - KDE_FIND_PATH(uic, UIC_PATH, [$qt_bindirs], [UIC_PATH=""]) - if test -z "$UIC_PATH" ; then - KDE_UIC_ERROR_MESSAGE - exit 1 - else - UIC=$UIC_PATH - - if test $kde_qtver = 3; then - KDE_CHECK_UIC_FLAG(L,[/nonexistent],ac_uic_supports_libpath=yes,ac_uic_supports_libpath=no) - KDE_CHECK_UIC_FLAG(nounload,,ac_uic_supports_nounload=yes,ac_uic_supports_nounload=no) - - if test x$ac_uic_supports_libpath = xyes; then - UIC="$UIC -L \$(kde_widgetdir)" - fi - if test x$ac_uic_supports_nounload = xyes; then - UIC="$UIC -nounload" - fi - fi - fi - else - UIC="echo uic not available: " - fi - - AC_SUBST(MOC) - AC_SUBST(UIC) - - UIC_TR="i18n" - if test $kde_qtver = 3; then - UIC_TR="tr2i18n" - fi - - AC_SUBST(UIC_TR) -]) - -AC_DEFUN([KDE_1_CHECK_PATHS], -[ - KDE_1_CHECK_PATH_HEADERS - - KDE_TEST_RPATH= - - if test -n "$USE_RPATH"; then - - if test -n "$kde_libraries"; then - KDE_TEST_RPATH="-R $kde_libraries" - fi - - if test -n "$qt_libraries"; then - KDE_TEST_RPATH="$KDE_TEST_RPATH -R $qt_libraries" - fi - - if test -n "$x_libraries"; then - KDE_TEST_RPATH="$KDE_TEST_RPATH -R $x_libraries" - fi - - KDE_TEST_RPATH="$KDE_TEST_RPATH $KDE_EXTRA_RPATH" - fi - -AC_MSG_CHECKING([for KDE libraries installed]) -ac_link='$LIBTOOL_SHELL --silent --mode=link ${CXX-g++} -o conftest $CXXFLAGS $all_includes $CPPFLAGS $LDFLAGS $all_libraries conftest.$ac_ext $LIBS -ltdecore $LIBTQT $KDE_TEST_RPATH 1>&5' - -if AC_TRY_EVAL(ac_link) && test -s conftest; then - AC_MSG_RESULT(yes) -else - AC_MSG_ERROR([your system fails at linking a small KDE application! -Check, if your compiler is installed correctly and if you have used the -same compiler to compile Qt and tdelibs as you did use now. -For more details about this problem, look at the end of config.log.]) -fi - -if eval `TDEDIR= ./conftest 2>&5`; then - kde_result=done -else - kde_result=problems -fi - -TDEDIR= ./conftest 2> /dev/null >&5 # make an echo for config.log -kde_have_all_paths=yes - -KDE_SET_PATHS($kde_result) - -]) - -AC_DEFUN([KDE_SET_PATHS], -[ - kde_cv_all_paths="kde_have_all_paths=\"yes\" \ - kde_htmldir=\"$kde_htmldir\" \ - kde_appsdir=\"$kde_appsdir\" \ - kde_icondir=\"$kde_icondir\" \ - kde_sounddir=\"$kde_sounddir\" \ - kde_datadir=\"$kde_datadir\" \ - kde_locale=\"$kde_locale\" \ - kde_cgidir=\"$kde_cgidir\" \ - kde_confdir=\"$kde_confdir\" \ - kde_kcfgdir=\"$kde_kcfgdir\" \ - kde_mimedir=\"$kde_mimedir\" \ - kde_toolbardir=\"$kde_toolbardir\" \ - kde_wallpaperdir=\"$kde_wallpaperdir\" \ - kde_templatesdir=\"$kde_templatesdir\" \ - kde_bindir=\"$kde_bindir\" \ - kde_servicesdir=\"$kde_servicesdir\" \ - kde_servicetypesdir=\"$kde_servicetypesdir\" \ - kde_moduledir=\"$kde_moduledir\" \ - kde_styledir=\"$kde_styledir\" \ - kde_widgetdir=\"$kde_widgetdir\" \ - xdg_appsdir=\"$xdg_appsdir\" \ - xdg_menudir=\"$xdg_menudir\" \ - xdg_directorydir=\"$xdg_directorydir\" \ - kde_result=$1" -]) - -AC_DEFUN([KDE_SET_DEFAULT_PATHS], -[ -if test "$1" = "default"; then - - if test -z "$kde_htmldir"; then - kde_htmldir='\${datadir}/doc/HTML' - fi - if test -z "$kde_appsdir"; then - kde_appsdir='\${datadir}/applnk' - fi - if test -z "$kde_icondir"; then - kde_icondir='\${datadir}/icons' - fi - if test -z "$kde_sounddir"; then - kde_sounddir='\${datadir}/sounds' - fi - if test -z "$kde_datadir"; then - kde_datadir='\${datadir}/apps' - fi - if test -z "$kde_locale"; then - kde_locale='\${datadir}/locale' - fi - if test -z "$kde_cgidir"; then - kde_cgidir='\${exec_prefix}/cgi-bin' - fi - if test -z "$kde_confdir"; then - kde_confdir='\${datadir}/config' - fi - if test -z "$kde_kcfgdir"; then - kde_kcfgdir='\${datadir}/config.kcfg' - fi - if test -z "$kde_mimedir"; then - kde_mimedir='\${datadir}/mimelnk' - fi - if test -z "$kde_toolbardir"; then - kde_toolbardir='\${datadir}/toolbar' - fi - if test -z "$kde_wallpaperdir"; then - kde_wallpaperdir='\${datadir}/wallpapers' - fi - if test -z "$kde_templatesdir"; then - kde_templatesdir='\${datadir}/templates' - fi - if test -z "$kde_bindir"; then - kde_bindir='\${exec_prefix}/bin' - fi - if test -z "$kde_servicesdir"; then - kde_servicesdir='\${datadir}/services' - fi - if test -z "$kde_servicetypesdir"; then - kde_servicetypesdir='\${datadir}/servicetypes' - fi - if test -z "$kde_moduledir"; then - if test "$kde_qtver" = "2"; then - kde_moduledir='\${libdir}/kde2' - else - kde_moduledir='\${libdir}/kde3' - fi - fi - if test -z "$kde_styledir"; then - kde_styledir='\${libdir}/kde3/plugins/styles' - fi - if test -z "$kde_widgetdir"; then - kde_widgetdir='\${libdir}/kde3/plugins/designer' - fi - if test -z "$xdg_appsdir"; then - xdg_appsdir='\${datadir}/applications/tde' - fi - if test -z "$xdg_menudir"; then - xdg_menudir='\${sysconfdir}/xdg/menus' - fi - if test -z "$xdg_directorydir"; then - xdg_directorydir='\${datadir}/desktop-directories' - fi - - KDE_SET_PATHS(defaults) - -else - - if test $kde_qtver = 1; then - AC_MSG_RESULT([compiling]) - KDE_1_CHECK_PATHS - else - AC_MSG_ERROR([path checking not yet supported for KDE 2]) - fi - -fi -]) - -AC_DEFUN([KDE_CHECK_PATHS_FOR_COMPLETENESS], -[ if test -z "$kde_htmldir" || test -z "$kde_appsdir" || - test -z "$kde_icondir" || test -z "$kde_sounddir" || - test -z "$kde_datadir" || test -z "$kde_locale" || - test -z "$kde_cgidir" || test -z "$kde_confdir" || - test -z "$kde_kcfgdir" || - test -z "$kde_mimedir" || test -z "$kde_toolbardir" || - test -z "$kde_wallpaperdir" || test -z "$kde_templatesdir" || - test -z "$kde_bindir" || test -z "$kde_servicesdir" || - test -z "$kde_servicetypesdir" || test -z "$kde_moduledir" || - test -z "$kde_styledir" || test -z "kde_widgetdir" || - test -z "$xdg_appsdir" || test -z "$xdg_menudir" || test -z "$xdg_directorydir" || - test "x$kde_have_all_paths" != "xyes"; then - kde_have_all_paths=no - fi -]) - -AC_DEFUN([KDE_MISSING_PROG_ERROR], -[ - AC_MSG_ERROR([The important program $1 was not found! -Please check whether you installed KDE correctly. -]) -]) - -AC_DEFUN([KDE_MISSING_ARTS_ERROR], -[ - AC_MSG_ERROR([The important program $1 was not found! -Please check whether you installed aRts correctly or use ---without-arts to compile without aRts support (this will remove functionality). -]) -]) - -AC_DEFUN([KDE_SET_DEFAULT_BINDIRS], -[ - kde_default_bindirs="/usr/bin /usr/local/bin /opt/local/bin /usr/X11R6/bin /opt/kde/bin /opt/kde3/bin /usr/kde/bin /usr/local/kde/bin" - test -n "$TDEDIR" && kde_default_bindirs="$TDEDIR/bin $kde_default_bindirs" - if test -n "$TDEDIRS"; then - kde_save_IFS=$IFS - IFS=: - for dir in $TDEDIRS; do - kde_default_bindirs="$dir/bin $kde_default_bindirs " - done - IFS=$kde_save_IFS - fi -]) - -AC_DEFUN([KDE_SUBST_PROGRAMS], -[ - AC_ARG_WITH(arts, - AC_HELP_STRING([--without-arts],[build without aRts [default=no]]), - [build_arts=$withval], - [build_arts=yes] - ) - AM_CONDITIONAL(include_ARTS, test "$build_arts" '!=' "no") - if test "$build_arts" = "no"; then - AC_DEFINE(WITHOUT_ARTS, 1, [Defined if compiling without arts]) - fi - - KDE_SET_DEFAULT_BINDIRS - kde_default_bindirs="$exec_prefix/bin $prefix/bin $kde_libs_prefix/bin $kde_default_bindirs" - KDE_FIND_PATH(dcopidl, DCOPIDL, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(dcopidl)]) - KDE_FIND_PATH(dcopidl2cpp, DCOPIDL2CPP, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(dcopidl2cpp)]) - if test "$build_arts" '!=' "no"; then - KDE_FIND_PATH(mcopidl, MCOPIDL, [$kde_default_bindirs], [KDE_MISSING_ARTS_ERROR(mcopidl)]) - KDE_FIND_PATH(artsc-config, ARTSCCONFIG, [$kde_default_bindirs], [KDE_MISSING_ARTS_ERROR(artsc-config)]) - fi - KDE_FIND_PATH(meinproc, MEINPROC, [$kde_default_bindirs]) - - kde32ornewer=1 - kde33ornewer=1 - if test -n "$kde_qtver" && test "$kde_qtver" -lt 3; then - kde32ornewer= - kde33ornewer= - else - if test "$kde_qtver" = "3"; then - if test "$kde_qtsubver" -le 1; then - kde32ornewer= - fi - if test "$kde_qtsubver" -le 2; then - kde33ornewer= - fi - if test "$KDECONFIG" != "compiled"; then - if test `$KDECONFIG --version | grep KDE | sed 's/KDE: \(...\).*/\1/'` = 3.2; then - kde33ornewer= - fi - fi - fi - fi - - if test -n "$kde32ornewer"; then - KDE_FIND_PATH(tdeconfig_compiler, KCONFIG_COMPILER, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(tdeconfig_compiler)]) - KDE_FIND_PATH(dcopidlng, DCOPIDLNG, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(dcopidlng)]) - fi - if test -n "$kde33ornewer"; then - KDE_FIND_PATH(maketdewidgets, MAKETDEWIDGETS, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(maketdewidgets)]) - AC_SUBST(MAKETDEWIDGETS) - fi - KDE_FIND_PATH(xmllint, XMLLINT, [${prefix}/bin ${exec_prefix}/bin], [XMLLINT=""]) - - if test -n "$MEINPROC" -a "$MEINPROC" != "compiled"; then - kde_sharedirs="$prefix/share /opt/trinity/share /opt/trinity/share /opt/kde/share /usr/share/kde /usr/local/share /usr/share" - test -n "$TDEDIR" && kde_sharedirs="$TDEDIR/share $kde_sharedirs" - AC_FIND_FILE(apps/ksgmltools2/customization/tde-chunk.xsl, $kde_sharedirs, KDE_XSL_STYLESHEET) - if test "$KDE_XSL_STYLESHEET" = "NO"; then - KDE_XSL_STYLESHEET="" - else - KDE_XSL_STYLESHEET="$KDE_XSL_STYLESHEET/apps/ksgmltools2/customization/tde-chunk.xsl" - fi - fi - - DCOP_DEPENDENCIES='$(DCOPIDL)' - if test -n "$kde32ornewer"; then - KCFG_DEPENDENCIES='$(KCONFIG_COMPILER)' - DCOP_DEPENDENCIES='$(DCOPIDL) $(DCOPIDLNG)' - AC_SUBST(KCONFIG_COMPILER) - AC_SUBST(KCFG_DEPENDENCIES) - AC_SUBST(DCOPIDLNG) - fi - AC_SUBST(DCOPIDL) - AC_SUBST(DCOPIDL2CPP) - AC_SUBST(DCOP_DEPENDENCIES) - AC_SUBST(MCOPIDL) - AC_SUBST(ARTSCCONFIG) - AC_SUBST(MEINPROC) - AC_SUBST(KDE_XSL_STYLESHEET) - AC_SUBST(XMLLINT) -])dnl - -AC_DEFUN([AC_CREATE_KFSSTND], -[ -AC_REQUIRE([AC_CHECK_RPATH]) - -AC_MSG_CHECKING([for KDE paths]) -kde_result="" -kde_cached_paths=yes -AC_CACHE_VAL(kde_cv_all_paths, -[ - KDE_SET_DEFAULT_PATHS($1) - kde_cached_paths=no -]) -eval "$kde_cv_all_paths" -KDE_CHECK_PATHS_FOR_COMPLETENESS -if test "$kde_have_all_paths" = "no" && test "$kde_cached_paths" = "yes"; then - # wrong values were cached, may be, we can set better ones - kde_result= - kde_htmldir= kde_appsdir= kde_icondir= kde_sounddir= - kde_datadir= kde_locale= kde_cgidir= kde_confdir= kde_kcfgdir= - kde_mimedir= kde_toolbardir= kde_wallpaperdir= kde_templatesdir= - kde_bindir= kde_servicesdir= kde_servicetypesdir= kde_moduledir= - kde_have_all_paths= - kde_styledir= - kde_widgetdir= - xdg_appsdir = xdg_menudir= xdg_directorydir= - KDE_SET_DEFAULT_PATHS($1) - eval "$kde_cv_all_paths" - KDE_CHECK_PATHS_FOR_COMPLETENESS - kde_result="$kde_result (cache overridden)" -fi -if test "$kde_have_all_paths" = "no"; then - AC_MSG_ERROR([configure could not run a little KDE program to test the environment. -Since it had compiled and linked before, it must be a strange problem on your system. -Look at config.log for details. If you are not able to fix this, look at -http://www.kde.org/faq/installation.html or any www.kde.org mirror. -(If you're using an egcs version on Linux, you may update binutils!) -]) -else - rm -f conftest* - AC_MSG_RESULT($kde_result) -fi - -bindir=$kde_bindir - -KDE_SUBST_PROGRAMS - -]) - -AC_DEFUN([AC_SUBST_KFSSTND], -[ -AC_SUBST(kde_htmldir) -AC_SUBST(kde_appsdir) -AC_SUBST(kde_icondir) -AC_SUBST(kde_sounddir) -AC_SUBST(kde_datadir) -AC_SUBST(kde_locale) -AC_SUBST(kde_confdir) -AC_SUBST(kde_kcfgdir) -AC_SUBST(kde_mimedir) -AC_SUBST(kde_wallpaperdir) -AC_SUBST(kde_bindir) -dnl X Desktop Group standards -AC_SUBST(xdg_appsdir) -AC_SUBST(xdg_menudir) -AC_SUBST(xdg_directorydir) -dnl for KDE 2 -AC_SUBST(kde_templatesdir) -AC_SUBST(kde_servicesdir) -AC_SUBST(kde_servicetypesdir) -AC_SUBST(kde_moduledir) -AC_SUBST(tdeinitdir, '$(kde_moduledir)') -AC_SUBST(kde_styledir) -AC_SUBST(kde_widgetdir) -if test "$kde_qtver" = 1; then - kde_minidir="$kde_icondir/mini" -else -# for KDE 1 - this breaks KDE2 apps using minidir, but -# that's the plan ;-/ - kde_minidir="/dev/null" -fi -dnl AC_SUBST(kde_minidir) -dnl AC_SUBST(kde_cgidir) -dnl AC_SUBST(kde_toolbardir) -]) - -AC_DEFUN([KDE_MISC_TESTS], -[ - dnl Checks for libraries. - AC_CHECK_LIB(util, main, [LIBUTIL="-lutil"]) dnl for *BSD - AC_SUBST(LIBUTIL) - AC_CHECK_LIB(compat, main, [LIBCOMPAT="-lcompat"]) dnl for *BSD - AC_SUBST(LIBCOMPAT) - kde_have_crypt= - AC_CHECK_LIB(crypt, crypt, [LIBCRYPT="-lcrypt"; kde_have_crypt=yes], - AC_CHECK_LIB(c, crypt, [kde_have_crypt=yes], [ - AC_MSG_WARN([you have no crypt in either libcrypt or libc. -You should install libcrypt from another source or configure with PAM -support]) - kde_have_crypt=no - ])) - AC_SUBST(LIBCRYPT) - if test $kde_have_crypt = yes; then - AC_DEFINE_UNQUOTED(HAVE_CRYPT, 1, [Defines if your system has the crypt function]) - fi - AC_CHECK_SOCKLEN_T - AC_CHECK_LIB(dnet, dnet_ntoa, [X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet"]) - if test $ac_cv_lib_dnet_dnet_ntoa = no; then - AC_CHECK_LIB(dnet_stub, dnet_ntoa, - [X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet_stub"]) - fi - AC_CHECK_FUNC(inet_ntoa) - if test $ac_cv_func_inet_ntoa = no; then - AC_CHECK_LIB(nsl, inet_ntoa, X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl") - fi - AC_CHECK_FUNC(connect) - if test $ac_cv_func_connect = no; then - AC_CHECK_LIB(socket, connect, X_EXTRA_LIBS="-lsocket $X_EXTRA_LIBS", , - $X_EXTRA_LIBS) - fi - - AC_CHECK_FUNC(remove) - if test $ac_cv_func_remove = no; then - AC_CHECK_LIB(posix, remove, X_EXTRA_LIBS="$X_EXTRA_LIBS -lposix") - fi - - # BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay. - AC_CHECK_FUNC(shmat, , - AC_CHECK_LIB(ipc, shmat, X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc")) - - # more headers that need to be explicitly included on darwin - AC_CHECK_HEADERS(sys/types.h stdint.h) - - # sys/bitypes.h is needed for uint32_t and friends on Tru64 - AC_CHECK_HEADERS(sys/bitypes.h) - - # darwin requires a poll emulation library - AC_CHECK_LIB(poll, poll, LIB_POLL="-lpoll") - - # for some image handling on Mac OS X - AC_CHECK_HEADERS(Carbon/Carbon.h) - - # CoreAudio framework - AC_CHECK_HEADER(CoreAudio/CoreAudio.h, [ - AC_DEFINE(HAVE_COREAUDIO, 1, [Define if you have the CoreAudio API]) - FRAMEWORK_COREAUDIO="-Wl,-framework,CoreAudio" - ]) - - AC_CHECK_RES_INIT - AC_SUBST(LIB_POLL) - AC_SUBST(FRAMEWORK_COREAUDIO) - LIBSOCKET="$X_EXTRA_LIBS" - AC_SUBST(LIBSOCKET) - AC_SUBST(X_EXTRA_LIBS) - AC_CHECK_LIB(ucb, killpg, [LIBUCB="-lucb"]) dnl for Solaris2.4 - AC_SUBST(LIBUCB) - - case $host in dnl this *is* LynxOS specific - *-*-lynxos* ) - AC_MSG_CHECKING([LynxOS header file wrappers]) - [CFLAGS="$CFLAGS -D__NO_INCLUDE_WARN__"] - AC_MSG_RESULT(disabled) - AC_CHECK_LIB(bsd, gethostbyname, [LIBSOCKET="-lbsd"]) dnl for LynxOS - ;; - esac - - KDE_CHECK_TYPES - KDE_CHECK_LIBDL - KDE_CHECK_STRLCPY - KDE_CHECK_PIE_SUPPORT - -# darwin needs this to initialize the environment -AC_CHECK_HEADERS(crt_externs.h) -AC_CHECK_FUNC(_NSGetEnviron, [AC_DEFINE(HAVE_NSGETENVIRON, 1, [Define if your system needs _NSGetEnviron to set up the environment])]) - -AH_VERBATIM(_DARWIN_ENVIRON, -[ -#if defined(HAVE_NSGETENVIRON) && defined(HAVE_CRT_EXTERNS_H) -# include -# include -# define environ (*_NSGetEnviron()) -#endif -]) - -AH_VERBATIM(_AIX_STRINGS_H_BZERO, -[ -/* - * AIX defines FD_SET in terms of bzero, but fails to include - * that defines bzero. - */ - -#if defined(_AIX) -#include -#endif -]) - -AC_CHECK_FUNCS([vsnprintf snprintf]) - -AH_VERBATIM(_TRU64,[ -/* - * On HP-UX, the declaration of vsnprintf() is needed every time ! - */ - -#if !defined(HAVE_VSNPRINTF) || defined(hpux) -#if __STDC__ -#include -#include -#else -#include -#endif -#ifdef __cplusplus -extern "C" -#endif -int vsnprintf(char *str, size_t n, char const *fmt, va_list ap); -#ifdef __cplusplus -extern "C" -#endif -int snprintf(char *str, size_t n, char const *fmt, ...); -#endif -]) - -]) - -dnl ------------------------------------------------------------------------ -dnl Find the header files and libraries for X-Windows. Extended the -dnl macro AC_PATH_X -dnl ------------------------------------------------------------------------ -dnl -AC_DEFUN([K_PATH_X], -[ -AC_REQUIRE([KDE_MISC_TESTS])dnl -AC_REQUIRE([KDE_CHECK_LIB64]) - -AC_ARG_ENABLE( - embedded, - AC_HELP_STRING([--enable-embedded],[link to Qt-embedded, don't use X]), - kde_use_qt_emb=$enableval, - kde_use_qt_emb=no -) - -AC_ARG_ENABLE( - qtopia, - AC_HELP_STRING([--enable-qtopia],[link to Qt-embedded, link to the Qtopia Environment]), - kde_use_qt_emb_palm=$enableval, - kde_use_qt_emb_palm=no -) - -AC_ARG_ENABLE( - mac, - AC_HELP_STRING([--enable-mac],[link to Qt/Mac (don't use X)]), - kde_use_qt_mac=$enableval, - kde_use_qt_mac=no -) - -# used to disable x11-specific stuff on special platforms -AM_CONDITIONAL(include_x11, test "$kde_use_qt_emb" = "no" && test "$kde_use_qt_mac" = "no") - -if test "$kde_use_qt_emb" = "no" && test "$kde_use_qt_mac" = "no"; then - -AC_MSG_CHECKING(for X) - -AC_CACHE_VAL(kde_cv_have_x, -[# One or both of the vars are not set, and there is no cached value. -if test "{$x_includes+set}" = set || test "$x_includes" = NONE; then - kde_x_includes=NO -else - kde_x_includes=$x_includes -fi -if test "{$x_libraries+set}" = set || test "$x_libraries" = NONE; then - kde_x_libraries=NO -else - kde_x_libraries=$x_libraries -fi - -# below we use the standard autoconf calls -ac_x_libraries=$kde_x_libraries -ac_x_includes=$kde_x_includes - -KDE_PATH_X_DIRECT -dnl AC_PATH_X_XMKMF picks /usr/lib as the path for the X libraries. -dnl Unfortunately, if compiling with the N32 ABI, this is not the correct -dnl location. The correct location is /usr/lib32 or an undefined value -dnl (the linker is smart enough to pick the correct default library). -dnl Things work just fine if you use just AC_PATH_X_DIRECT. -dnl Solaris has a similar problem. AC_PATH_X_XMKMF forces x_includes to -dnl /usr/openwin/include, which doesn't work. /usr/include does work, so -dnl x_includes should be left alone. -case "$host" in -mips-sgi-irix6*) - ;; -*-*-solaris*) - ;; -*) - _AC_PATH_X_XMKMF - if test -z "$ac_x_includes"; then - ac_x_includes="." - fi - if test -z "$ac_x_libraries"; then - ac_x_libraries="/usr/lib${tdelibsuff}" - fi -esac -#from now on we use our own again - -# when the user already gave --x-includes, we ignore -# what the standard autoconf macros told us. -if test "$kde_x_includes" = NO; then - kde_x_includes=$ac_x_includes -fi - -# for --x-libraries too -if test "$kde_x_libraries" = NO; then - kde_x_libraries=$ac_x_libraries -fi - -if test "$kde_x_includes" = NO; then - AC_MSG_ERROR([Can't find X includes. Please check your installation and add the correct paths!]) -fi - -if test "$kde_x_libraries" = NO; then - AC_MSG_ERROR([Can't find X libraries. Please check your installation and add the correct paths!]) -fi - -# Record where we found X for the cache. -kde_cv_have_x="have_x=yes \ - kde_x_includes=$kde_x_includes kde_x_libraries=$kde_x_libraries" -])dnl - -eval "$kde_cv_have_x" - -if test "$have_x" != yes; then - AC_MSG_RESULT($have_x) - no_x=yes -else - AC_MSG_RESULT([libraries $kde_x_libraries, headers $kde_x_includes]) -fi - -if test -z "$kde_x_includes" || test "x$kde_x_includes" = xNONE; then - X_INCLUDES="" - x_includes="."; dnl better than nothing :- - else - x_includes=$kde_x_includes - X_INCLUDES="-I$x_includes" -fi - -if test -z "$kde_x_libraries" || test "x$kde_x_libraries" = xNONE || test "$kde_x_libraries" = "/usr/lib"; then - X_LDFLAGS="" - x_libraries="/usr/lib"; dnl better than nothing :- - else - x_libraries=$kde_x_libraries - X_LDFLAGS="-L$x_libraries" -fi -all_includes="$X_INCLUDES" -all_libraries="$X_LDFLAGS $LDFLAGS_AS_NEEDED $LDFLAGS_NEW_DTAGS" - -# Check for libraries that X11R6 Xt/Xaw programs need. -ac_save_LDFLAGS="$LDFLAGS" -LDFLAGS="$LDFLAGS $X_LDFLAGS" -# SM needs ICE to (dynamically) link under SunOS 4.x (so we have to -# check for ICE first), but we must link in the order -lSM -lICE or -# we get undefined symbols. So assume we have SM if we have ICE. -# These have to be linked with before -lX11, unlike the other -# libraries we check for below, so use a different variable. -# --interran@uluru.Stanford.EDU, kb@cs.umb.edu. -AC_CHECK_LIB(ICE, IceConnectionNumber, - [LIBSM="-lSM -lICE"], , $X_EXTRA_LIBS) -LDFLAGS="$ac_save_LDFLAGS" - -LIB_X11='-lX11 $(LIBSOCKET)' - -AC_MSG_CHECKING(for libXext) -AC_CACHE_VAL(kde_cv_have_libXext, -[ -kde_ldflags_safe="$LDFLAGS" -kde_libs_safe="$LIBS" - -LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS" -LIBS="-lXext -lX11 $LIBSOCKET" - -AC_TRY_LINK([ -#include -#ifdef STDC_HEADERS -# include -#endif -], -[ -printf("hello Xext\n"); -], -kde_cv_have_libXext=yes, -kde_cv_have_libXext=no -) - -LDFLAGS=$kde_ldflags_safe -LIBS=$kde_libs_safe -]) - -AC_MSG_RESULT($kde_cv_have_libXext) - -if test "$kde_cv_have_libXext" = "no"; then - AC_MSG_ERROR([We need a working libXext to proceed. Since configure -can't find it itself, we stop here assuming that make wouldn't find -them either.]) -fi - -LIB_XEXT="-lXext" -QTE_NORTTI="" - -elif test "$kde_use_qt_emb" = "yes"; then - dnl We're using QT Embedded - CPPFLAGS=-DQWS - CXXFLAGS="$CXXFLAGS -fno-rtti" - QTE_NORTTI="-fno-rtti -DQWS" - X_PRE_LIBS="" - LIB_X11="" - LIB_XEXT="" - LIB_XRENDER="" - LIBSM="" - X_INCLUDES="" - X_LDFLAGS="" - x_includes="" - x_libraries="" -elif test "$kde_use_qt_mac" = "yes"; then - dnl We're using QT/Mac (I use QT_MAC so that qglobal.h doesn't *have* to - dnl be included to get the information) --Sam - CXXFLAGS="$CXXFLAGS -DQT_MAC -no-cpp-precomp" - CFLAGS="$CFLAGS -DQT_MAC -no-cpp-precomp" - X_PRE_LIBS="" - LIB_X11="" - LIB_XEXT="" - LIB_XRENDER="" - LIBSM="" - X_INCLUDES="" - X_LDFLAGS="" - x_includes="" - x_libraries="" -fi -AC_SUBST(X_PRE_LIBS) -AC_SUBST(LIB_X11) -AC_SUBST(LIB_XRENDER) -AC_SUBST(LIBSM) -AC_SUBST(X_INCLUDES) -AC_SUBST(X_LDFLAGS) -AC_SUBST(x_includes) -AC_SUBST(x_libraries) -AC_SUBST(QTE_NORTTI) -AC_SUBST(LIB_XEXT) - -]) - -AC_DEFUN([KDE_PRINT_QT_PROGRAM], -[ -AC_REQUIRE([KDE_USE_TQT]) -cat > conftest.$ac_ext < -#include -EOF -if test "$kde_qtver" = "2"; then -cat >> conftest.$ac_ext < -#include -#include -EOF - -if test $kde_qtsubver -gt 0; then -cat >> conftest.$ac_ext <> conftest.$ac_ext < -#include -#include -EOF -fi - -echo "#if ! ($kde_qt_verstring)" >> conftest.$ac_ext -cat >> conftest.$ac_ext <> conftest.$ac_ext <> conftest.$ac_ext <> conftest.$ac_ext <> conftest.$ac_ext <&AC_FD_CC - cat conftest.$ac_ext >&AC_FD_CC -fi - -rm -f conftest* -CXXFLAGS="$ac_cxxflags_safe" -LDFLAGS="$ac_ldflags_safe" -LIBS="$ac_libs_safe" - -LD_LIBRARY_PATH="$ac_LD_LIBRARY_PATH_safe" -export LD_LIBRARY_PATH -LIBRARY_PATH="$ac_LIBRARY_PATH" -export LIBRARY_PATH -AC_LANG_RESTORE -]) - -if test "$kde_cv_qt_direct" = "yes"; then - AC_MSG_RESULT(yes) - $1 -else - AC_MSG_RESULT(no) - $2 -fi -]) - -dnl ------------------------------------------------------------------------ -dnl Try to find the Qt headers and libraries. -dnl $(QT_LDFLAGS) will be -Ltqtliblocation (if needed) -dnl and $(TQT_INCLUDES) will be -Iqthdrlocation (if needed) -dnl ------------------------------------------------------------------------ -dnl -AC_DEFUN([AC_PATH_TQT_1_3], -[ -AC_REQUIRE([K_PATH_X]) -AC_REQUIRE([KDE_USE_TQT]) -AC_REQUIRE([KDE_CHECK_LIB64]) - -dnl ------------------------------------------------------------------------ -dnl Add configure flag to enable linking to MT version of Qt library. -dnl ------------------------------------------------------------------------ - -AC_ARG_ENABLE( - mt, - AC_HELP_STRING([--disable-mt],[link to non-threaded Qt (deprecated)]), - kde_use_qt_mt=$enableval, - [ - if test $kde_qtver = 3; then - kde_use_qt_mt=yes - else - kde_use_qt_mt=no - fi - ] -) - -USING_QT_MT="" - -dnl ------------------------------------------------------------------------ -dnl If we not get --disable-qt-mt then adjust some vars for the host. -dnl ------------------------------------------------------------------------ - -KDE_MT_LDFLAGS= -KDE_MT_LIBS= -if test "x$kde_use_qt_mt" = "xyes"; then - KDE_CHECK_THREADING - if test "x$kde_use_threading" = "xyes"; then - CPPFLAGS="$USE_THREADS -DTQT_THREAD_SUPPORT $CPPFLAGS" - KDE_MT_LDFLAGS="$USE_THREADS" - KDE_MT_LIBS="$LIBPTHREAD" - else - kde_use_qt_mt=no - fi -fi -AC_SUBST(KDE_MT_LDFLAGS) -AC_SUBST(KDE_MT_LIBS) - -kde_qt_was_given=yes - -dnl ------------------------------------------------------------------------ -dnl If we haven't been told how to link to Qt, we work it out for ourselves. -dnl ------------------------------------------------------------------------ -if test -z "$LIBTQT_GLOB"; then - if test "x$kde_use_qt_emb" = "xyes"; then - LIBTQT_GLOB="libtqte.*" - else - LIBTQT_GLOB="libtqt.*" - fi -fi - -dnl ------------------------------------------------------------ -dnl If we got --enable-embedded then adjust the Qt library name. -dnl ------------------------------------------------------------ -if test "x$kde_use_qt_emb" = "xyes"; then - tqtlib="qte" -else - tqtlib="qt" -fi - -kde_int_qt="-l$tqtlib" - -if test -z "$LIBQPE"; then -dnl ------------------------------------------------------------ -dnl If we got --enable-palmtop then add -lqpe to the link line -dnl ------------------------------------------------------------ - if test "x$kde_use_qt_emb" = "xyes"; then - if test "x$kde_use_qt_emb_palm" = "xyes"; then - LIB_QPE="-lqpe" - else - LIB_QPE="" - fi - else - LIB_QPE="" - fi -fi - -dnl ------------------------------------------------------------------------ -dnl If we got --enable-qt-mt then adjust the Qt library name for the host. -dnl ------------------------------------------------------------------------ - -if test "x$kde_use_qt_mt" = "xyes"; then - LIBTQT="-l$tqtlib-mt" - kde_int_qt="-l$tqtlib-mt" - LIBTQT_GLOB="lib$tqtlib-mt.*" - USING_QT_MT="using -mt" -else - LIBTQT="-l$tqtlib" -fi - -if test $kde_qtver != 1; then - - AC_REQUIRE([AC_FIND_PNG]) - AC_REQUIRE([AC_FIND_JPEG]) - LIBTQT="$LIBTQT $LIBPNG $LIBJPEG" -fi - -if test $kde_qtver = 3; then - AC_REQUIRE([KDE_CHECK_LIBDL]) - LIBTQT="$LIBTQT $LIBDL" -fi - -AC_MSG_CHECKING([for Qt]) - -if test "x$kde_use_qt_emb" != "xyes" && test "x$kde_use_qt_mac" != "xyes"; then -LIBTQT="$LIBTQT $X_PRE_LIBS -lXext -lX11 $LIBSM $LIBSOCKET" -fi -ac_tqt_includes=NO ac_qt_libraries=NO ac_qt_bindir=NO -qt_libraries="" -tqt_includes="" -AC_ARG_WITH(qt-dir, - AC_HELP_STRING([--with-qt-dir=DIR],[where the root of Qt is installed ]), - [ ac_tqt_includes="$withval"/include - ac_qt_libraries="$withval"/lib${tdelibsuff} - ac_qt_bindir="$withval"/bin - ]) - -AC_ARG_WITH(qt-includes, - AC_HELP_STRING([--with-qt-includes=DIR],[where the Qt includes are. ]), - [ - ac_tqt_includes="$withval" - ]) - -kde_qt_libs_given=no - -AC_ARG_WITH(qt-libraries, - AC_HELP_STRING([--with-qt-libraries=DIR],[where the Qt library is installed.]), - [ ac_qt_libraries="$withval" - kde_qt_libs_given=yes - ]) - -AC_CACHE_VAL(ac_cv_have_qt, -[#try to guess Qt locations - -qt_incdirs="" -for dir in $kde_qt_dirs; do - qt_incdirs="$qt_incdirs $dir/include $dir" -done -if test -z "$PKG_CONFIG"; then - AC_PATH_PROG(PKG_CONFIG, pkg-config, no) -fi -if test "$PKG_CONFIG" != "no" ; then - if $PKG_CONFIG --exists qt-mt ; then - qt_incdirs="$qt_incdirs `$PKG_CONFIG --variable=includedir qt-mt`" - fi -fi -qt_incdirs="$QTINC $qt_incdirs /usr/local/qt/include /usr/include/qt /usr/include /usr/X11R6/include/X11/qt /usr/X11R6/include/qt /usr/X11R6/include/qt2 /usr/include/qt3 $x_includes" -if test ! "$ac_tqt_includes" = "NO"; then - qt_incdirs="$ac_tqt_includes $qt_incdirs" -fi - -if test "$kde_qtver" != "1"; then - kde_qt_header=qstyle.h -else - kde_qt_header=qglobal.h -fi - -AC_FIND_FILE($kde_qt_header, $qt_incdirs, qt_incdir) -ac_tqt_includes="$qt_incdir" - -qt_libdirs="" -for dir in $kde_qt_dirs; do - qt_libdirs="$qt_libdirs $dir/lib${tdelibsuff} $dir/lib $dir" -done -if test -z "$PKG_CONFIG"; then - AC_PATH_PROG(PKG_CONFIG, pkg-config, no) -fi -if test "$PKG_CONFIG" != "no" ; then - if $PKG_CONFIG --exists qt-mt ; then - qt_libdirs="$qt_incdirs `$PKG_CONFIG --variable=libdir qt-mt`" - fi -fi -qt_libdirs="$TQTLIB $qt_libdirs /usr/X11R6/lib /usr/lib /usr/local/qt/lib $x_libraries" -if test ! "$ac_qt_libraries" = "NO"; then - qt_libdir=$ac_qt_libraries -else - qt_libdirs="$ac_qt_libraries $qt_libdirs" - # if the Qt was given, the chance is too big that libtqt.* doesn't exist - qt_libdir=NONE - for dir in $qt_libdirs; do - try="ls -1 $dir/${LIBTQT_GLOB}" - if test -n "`$try 2> /dev/null`"; then qt_libdir=$dir; break; else echo "tried $dir" >&AC_FD_CC ; fi - done -fi -for a in $qt_libdir/lib`echo ${kde_int_qt} | sed 's,^-l,,'`_incremental.*; do - if test -e "$a"; then - LIBTQT="$LIBTQT ${kde_int_qt}_incremental" - break - fi -done - -ac_qt_libraries="$qt_libdir" - -AC_LANG_SAVE -AC_LANG_CPLUSPLUS - -ac_cxxflags_safe="$CXXFLAGS" -ac_ldflags_safe="$LDFLAGS" -ac_libs_safe="$LIBS" - -CXXFLAGS="$CXXFLAGS -I$qt_incdir $all_includes" -LDFLAGS="$LDFLAGS -L$qt_libdir $all_libraries $USER_LDFLAGS $KDE_MT_LDFLAGS" -LIBS="$LIBS $LIBTQT $KDE_MT_LIBS" - -KDE_PRINT_QT_PROGRAM - -if AC_TRY_EVAL(ac_link) && test -s conftest; then - rm -f conftest* -else - echo "configure: failed program was:" >&AC_FD_CC - cat conftest.$ac_ext >&AC_FD_CC - ac_qt_libraries="NO" -fi -rm -f conftest* -CXXFLAGS="$ac_cxxflags_safe" -LDFLAGS="$ac_ldflags_safe" -LIBS="$ac_libs_safe" - -AC_LANG_RESTORE -if test "$ac_tqt_includes" = NO || test "$ac_qt_libraries" = NO; then - ac_cv_have_qt="have_qt=no" - ac_qt_notfound="" - missing_qt_mt="" - if test "$ac_tqt_includes" = NO; then - if test "$ac_qt_libraries" = NO; then - ac_qt_notfound="(headers and libraries)"; - else - ac_qt_notfound="(headers)"; - fi - else - if test "x$kde_use_qt_mt" = "xyes"; then - missing_qt_mt=" -Make sure that you have compiled Qt with thread support!" - ac_qt_notfound="(library $tqtlib-mt)"; - else - ac_qt_notfound="(library $tqtlib)"; - fi - fi - - AC_MSG_ERROR([Qt ($kde_qt_minversion) $ac_qt_notfound not found. Please check your installation! -For more details about this problem, look at the end of config.log.$missing_qt_mt]) -else - have_qt="yes" -fi -]) - -eval "$ac_cv_have_qt" - -if test "$have_qt" != yes; then - AC_MSG_RESULT([$have_qt]); -else - ac_cv_have_qt="have_qt=yes \ - ac_tqt_includes=$ac_tqt_includes ac_qt_libraries=$ac_qt_libraries" - AC_MSG_RESULT([libraries $ac_qt_libraries, headers $ac_tqt_includes $USING_QT_MT]) - - qt_libraries="$ac_qt_libraries" - tqt_includes="$ac_tqt_includes" -fi - -if test ! "$kde_qt_libs_given" = "yes" && test ! "$kde_qtver" = 3; then - KDE_CHECK_QT_DIRECT(qt_libraries= ,[]) -fi - -AC_SUBST(qt_libraries) -AC_SUBST(tqt_includes) - -if test "$tqt_includes" = "$x_includes" || test -z "$tqt_includes"; then - TQT_INCLUDES="" -else - TQT_INCLUDES="-I$tqt_includes" - all_includes="$TQT_INCLUDES $all_includes" -fi - -if test "$qt_libraries" = "$x_libraries" || test -z "$qt_libraries"; then - QT_LDFLAGS="" -else - QT_LDFLAGS="-L$qt_libraries" - all_libraries="$QT_LDFLAGS $all_libraries" -fi -test -z "$KDE_MT_LDFLAGS" || all_libraries="$all_libraries $KDE_MT_LDFLAGS" - -AC_SUBST(TQT_INCLUDES) -AC_SUBST(QT_LDFLAGS) -AC_PATH_TQT_MOC_UIC - -KDE_CHECK_QT_JPEG - -if test "x$kde_use_qt_emb" != "xyes" && test "x$kde_use_qt_mac" != "xyes"; then -LIB_TQT="$kde_int_qt $LIBJPEG_QT "'$(LIBZ) $(LIBPNG) -lXext $(LIB_X11) $(LIBSM)' -else -LIB_TQT="$kde_int_qt $LIBJPEG_QT "'$(LIBZ) $(LIBPNG)' -fi -test -z "$KDE_MT_LIBS" || LIB_TQT="$LIB_TQT $KDE_MT_LIBS" -for a in $qt_libdir/lib`echo ${kde_int_qt} | sed 's,^-l,,'`_incremental.*; do - if test -e "$a"; then - LIB_TQT="$LIB_TQT ${kde_int_qt}_incremental" - break - fi -done - -AC_SUBST(LIB_TQT) -AC_SUBST(LIB_QPE) - -AC_SUBST(kde_qtver) -]) - -AC_DEFUN([AC_PATH_TQT], -[ -AC_PATH_TQT_1_3 -]) - -AC_DEFUN([KDE_CHECK_UIC_PLUGINS], -[ -AC_REQUIRE([AC_PATH_TQT_MOC_UIC]) - -if test x$ac_uic_supports_libpath = xyes; then - -AC_MSG_CHECKING([if UIC has KDE plugins available]) -AC_CACHE_VAL(kde_cv_uic_plugins, -[ -cat > actest.ui << EOF - -NewConnectionDialog - - - - testInput - - - - -EOF - - - -kde_cv_uic_plugins=no -kde_line="$UIC_PATH -L $kde_widgetdir" -if test x$ac_uic_supports_nounload = xyes; then - kde_line="$kde_line -nounload" -fi -kde_line="$kde_line -impl actest.h actest.ui > actest.cpp" -if AC_TRY_EVAL(kde_line); then - # if you're trying to debug this check and think it's incorrect, - # better check your installation. The check _is_ correct - your - # installation is not. - if test -f actest.cpp && grep klineedit actest.cpp > /dev/null; then - kde_cv_uic_plugins=yes - fi -fi -rm -f actest.ui actest.cpp -]) - -AC_MSG_RESULT([$kde_cv_uic_plugins]) -if test "$kde_cv_uic_plugins" != yes; then - AC_MSG_ERROR([ -you need to install tdelibs first. - -If you did install tdelibs, then the Qt version that is picked up by -this configure is not the same version you used to compile tdelibs. -The Qt Plugin installed by tdelibs is *ONLY* loadable if it is the -_same Qt version_, compiled with the _same compiler_ and the same Qt -configuration settings. -]) -fi -fi -]) - -AC_DEFUN([KDE_CHECK_FINAL], -[ - AC_ARG_ENABLE(final, - AC_HELP_STRING([--enable-final], - [build size optimized apps (experimental - needs lots of memory)]), - kde_use_final=$enableval, kde_use_final=no) - - if test "x$kde_use_final" = "xyes"; then - KDE_USE_FINAL_TRUE="" - KDE_USE_FINAL_FALSE="#" - else - KDE_USE_FINAL_TRUE="#" - KDE_USE_FINAL_FALSE="" - fi - AC_SUBST(KDE_USE_FINAL_TRUE) - AC_SUBST(KDE_USE_FINAL_FALSE) -]) - -AC_DEFUN([KDE_CHECK_CLOSURE], -[ - AC_ARG_ENABLE(closure, - AC_HELP_STRING([--enable-closure],[delay template instantiation]), - kde_use_closure=$enableval, kde_use_closure=no) - - KDE_NO_UNDEFINED="" - if test "x$kde_use_closure" = "xyes"; then - KDE_USE_CLOSURE_TRUE="" - KDE_USE_CLOSURE_FALSE="#" -# CXXFLAGS="$CXXFLAGS $REPO" - else - KDE_USE_CLOSURE_TRUE="#" - KDE_USE_CLOSURE_FALSE="" - KDE_NO_UNDEFINED="" - case $host in - *-*-linux-gnu) - KDE_CHECK_COMPILER_FLAG([Wl,--no-undefined], - [KDE_CHECK_COMPILER_FLAG([Wl,--allow-shlib-undefined], - [KDE_NO_UNDEFINED="-Wl,--no-undefined -Wl,--allow-shlib-undefined"], - [KDE_NO_UNDEFINED=""])], - [KDE_NO_UNDEFINED=""]) - ;; - esac - fi - AC_SUBST(KDE_USE_CLOSURE_TRUE) - AC_SUBST(KDE_USE_CLOSURE_FALSE) - AC_SUBST(KDE_NO_UNDEFINED) -]) - -dnl Check if the linker supports --enable-new-dtags and --as-needed -AC_DEFUN([KDE_CHECK_NEW_LDFLAGS], -[ - AC_ARG_ENABLE(new_ldflags, - AC_HELP_STRING([--enable-new-ldflags], - [enable the new linker flags]), - kde_use_new_ldflags=$enableval, - kde_use_new_ldflags=no) - - LDFLAGS_AS_NEEDED="" - LDFLAGS_NEW_DTAGS="" - if test "x$kde_use_new_ldflags" = "xyes"; then - LDFLAGS_NEW_DTAGS="" - KDE_CHECK_COMPILER_FLAG([Wl,--enable-new-dtags], - [LDFLAGS_NEW_DTAGS="-Wl,--enable-new-dtags"],) - - KDE_CHECK_COMPILER_FLAG([Wl,--as-needed], - [LDFLAGS_AS_NEEDED="-Wl,--as-needed"],) - fi - AC_SUBST(LDFLAGS_AS_NEEDED) - AC_SUBST(LDFLAGS_NEW_DTAGS) -]) - -AC_DEFUN([KDE_CHECK_NMCHECK], -[ - AC_ARG_ENABLE(nmcheck,AC_HELP_STRING([--enable-nmcheck],[enable automatic namespace cleanness check]), - kde_use_nmcheck=$enableval, kde_use_nmcheck=no) - - if test "$kde_use_nmcheck" = "yes"; then - KDE_USE_NMCHECK_TRUE="" - KDE_USE_NMCHECK_FALSE="#" - else - KDE_USE_NMCHECK_TRUE="#" - KDE_USE_NMCHECK_FALSE="" - fi - AC_SUBST(KDE_USE_NMCHECK_TRUE) - AC_SUBST(KDE_USE_NMCHECK_FALSE) -]) - -AC_DEFUN([KDE_EXPAND_MAKEVAR], [ -savex=$exec_prefix -test "x$exec_prefix" = xNONE && exec_prefix=$prefix -tmp=$$2 -while $1=`eval echo "$tmp"`; test "x$$1" != "x$tmp"; do tmp=$$1; done -exec_prefix=$savex -]) - -dnl ------------------------------------------------------------------------ -dnl Now, the same with KDE -dnl $(KDE_LDFLAGS) will be the kdeliblocation (if needed) -dnl and $(kde_includes) will be the kdehdrlocation (if needed) -dnl ------------------------------------------------------------------------ -dnl -AC_DEFUN([AC_BASE_PATH_KDE], -[ -AC_REQUIRE([KDE_CHECK_STL]) -AC_REQUIRE([AC_PATH_TQT])dnl -AC_REQUIRE([KDE_CHECK_LIB64]) - -AC_CHECK_RPATH -AC_MSG_CHECKING([for KDE]) - -if test "${prefix}" != NONE; then - kde_includes=${includedir} - KDE_EXPAND_MAKEVAR(ac_kde_includes, includedir) - - kde_libraries=${libdir} - KDE_EXPAND_MAKEVAR(ac_kde_libraries, libdir) - -else - ac_kde_includes= - ac_kde_libraries= - kde_libraries="" - kde_includes="" -fi - -AC_CACHE_VAL(ac_cv_have_kde, -[#try to guess kde locations - -if test "$kde_qtver" = 1; then - kde_check_header="ksock.h" - kde_check_lib="libtdecore.la" -else - kde_check_header="ksharedptr.h" - kde_check_lib="libtdeio.la" -fi - -if test -z "$1"; then - -kde_incdirs="$kde_libs_prefix/include /usr/lib/kde/include /usr/local/kde/include /usr/local/include /usr/kde/include /usr/include/tde /usr/include /opt/kde3/include /opt/kde/include $x_includes $tqt_includes" -test -n "$TDEDIR" && kde_incdirs="$TDEDIR/include $TDEDIR/include/tde $TDEDIR $kde_incdirs" -kde_incdirs="$ac_kde_includes $kde_incdirs" -AC_FIND_FILE($kde_check_header, $kde_incdirs, kde_incdir) -ac_kde_includes="$kde_incdir" - -if test -n "$ac_kde_includes" && test ! -r "$ac_kde_includes/$kde_check_header"; then - AC_MSG_ERROR([ -in the prefix, you've chosen, are no KDE headers installed. This will fail. -So, check this please and use another prefix!]) -fi - -kde_libdirs="$kde_libs_prefix/lib${tdelibsuff} /usr/lib/kde/lib${tdelibsuff} /usr/local/kde/lib${tdelibsuff} /usr/kde/lib${tdelibsuff} /usr/lib${tdelibsuff}/kde /usr/lib${tdelibsuff}/kde3 /usr/lib${tdelibsuff} /usr/X11R6/lib${tdelibsuff} /usr/local/lib${tdelibsuff} /opt/kde3/lib${tdelibsuff} /opt/kde/lib${tdelibsuff} /usr/X11R6/kde/lib${tdelibsuff}" -test -n "$TDEDIR" && kde_libdirs="$TDEDIR/lib${tdelibsuff} $TDEDIR $kde_libdirs" -kde_libdirs="$ac_kde_libraries $libdir $kde_libdirs" -AC_FIND_FILE($kde_check_lib, $kde_libdirs, kde_libdir) -ac_kde_libraries="$kde_libdir" - -kde_widgetdir=NO -dnl this might be somewhere else -AC_FIND_FILE("kde3/plugins/designer/tdewidgets.la", $kde_libdirs, kde_widgetdir) - -if test -n "$ac_kde_libraries" && test ! -r "$ac_kde_libraries/$kde_check_lib"; then -AC_MSG_ERROR([ -in the prefix, you've chosen, are no KDE libraries installed. This will fail. -So, check this please and use another prefix!]) -fi - -if test -n "$kde_widgetdir" && test ! -r "$kde_widgetdir/kde3/plugins/designer/tdewidgets.la"; then -AC_MSG_ERROR([ -I can't find the designer plugins. These are required and should have been installed -by tdelibs]) -fi - -if test -n "$kde_widgetdir"; then - kde_widgetdir="$kde_widgetdir/kde3/plugins/designer" -fi - - -if test "$ac_kde_includes" = NO || test "$ac_kde_libraries" = NO || test "$kde_widgetdir" = NO; then - ac_cv_have_kde="have_kde=no" -else - ac_cv_have_kde="have_kde=yes \ - ac_kde_includes=$ac_kde_includes ac_kde_libraries=$ac_kde_libraries" -fi - -else dnl test -z $1, e.g. from tdelibs - - ac_cv_have_kde="have_kde=no" - -fi -])dnl - -eval "$ac_cv_have_kde" - -if test "$have_kde" != "yes"; then - if test "${prefix}" = NONE; then - ac_kde_prefix="$ac_default_prefix" - else - ac_kde_prefix="$prefix" - fi - if test "$exec_prefix" = NONE; then - ac_kde_exec_prefix="$ac_kde_prefix" - AC_MSG_RESULT([will be installed in $ac_kde_prefix]) - else - ac_kde_exec_prefix="$exec_prefix" - AC_MSG_RESULT([will be installed in $ac_kde_prefix and $ac_kde_exec_prefix]) - fi - - kde_libraries="${libdir}" - kde_includes="${includedir}" - -else - ac_cv_have_kde="have_kde=yes \ - ac_kde_includes=$ac_kde_includes ac_kde_libraries=$ac_kde_libraries" - AC_MSG_RESULT([libraries $ac_kde_libraries, headers $ac_kde_includes]) - - kde_libraries="$ac_kde_libraries" - kde_includes="$ac_kde_includes" -fi -AC_SUBST(kde_libraries) -AC_SUBST(kde_includes) - -if test "$kde_includes" = "$x_includes" || test "$kde_includes" = "$tqt_includes" || test "$kde_includes" = "/usr/include"; then - KDE_INCLUDES="" -else - KDE_INCLUDES="-I$kde_includes" - all_includes="$KDE_INCLUDES $all_includes" -fi - -KDE_DEFAULT_CXXFLAGS="-DTQT_NO_ASCII_CAST -DTQT_NO_STL -DTQT_NO_COMPAT -DTQT_NO_TRANSLATION" - -KDE_LDFLAGS="-L$kde_libraries" -if test ! "$kde_libraries" = "$x_libraries" && test ! "$kde_libraries" = "$qt_libraries" ; then - all_libraries="$KDE_LDFLAGS $all_libraries" -fi - -AC_SUBST(KDE_LDFLAGS) -AC_SUBST(KDE_INCLUDES) - -AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) - -all_libraries="$all_libraries $USER_LDFLAGS" -all_includes="$all_includes $USER_INCLUDES" -AC_SUBST(all_includes) -AC_SUBST(all_libraries) - -if test -z "$1"; then -KDE_CHECK_UIC_PLUGINS -fi - -ac_kde_libraries="$kde_libdir" - -AC_SUBST(AUTODIRS) - - -]) - -AC_DEFUN([KDE_CHECK_EXTRA_LIBS], -[ -AC_MSG_CHECKING(for extra includes) -AC_ARG_WITH(extra-includes,AC_HELP_STRING([--with-extra-includes=DIR],[adds non standard include paths]), - kde_use_extra_includes="$withval", - kde_use_extra_includes=NONE -) -kde_extra_includes= -if test -n "$kde_use_extra_includes" && \ - test "$kde_use_extra_includes" != "NONE"; then - - ac_save_ifs=$IFS - IFS=':' - for dir in $kde_use_extra_includes; do - kde_extra_includes="$kde_extra_includes $dir" - USER_INCLUDES="$USER_INCLUDES -I$dir" - done - IFS=$ac_save_ifs - kde_use_extra_includes="added" -else - kde_use_extra_includes="no" -fi -AC_SUBST(USER_INCLUDES) - -AC_MSG_RESULT($kde_use_extra_includes) - -kde_extra_libs= -AC_MSG_CHECKING(for extra libs) -AC_ARG_WITH(extra-libs,AC_HELP_STRING([--with-extra-libs=DIR],[adds non standard library paths]), - kde_use_extra_libs=$withval, - kde_use_extra_libs=NONE -) -if test -n "$kde_use_extra_libs" && \ - test "$kde_use_extra_libs" != "NONE"; then - - ac_save_ifs=$IFS - IFS=':' - for dir in $kde_use_extra_libs; do - kde_extra_libs="$kde_extra_libs $dir" - KDE_EXTRA_RPATH="$KDE_EXTRA_RPATH -R $dir" - USER_LDFLAGS="$USER_LDFLAGS -L$dir" - done - IFS=$ac_save_ifs - kde_use_extra_libs="added" -else - kde_use_extra_libs="no" -fi - -AC_SUBST(USER_LDFLAGS) - -AC_MSG_RESULT($kde_use_extra_libs) - -]) - -AC_DEFUN([KDE_1_CHECK_PATH_HEADERS], -[ - AC_MSG_CHECKING([for KDE headers installed]) - AC_LANG_SAVE - AC_LANG_CPLUSPLUS -cat > conftest.$ac_ext < -#endif -#include -#include "confdefs.h" -#include - -int main() { - printf("kde_htmldir=\\"%s\\"\n", TDEApplication::kde_htmldir().data()); - printf("kde_appsdir=\\"%s\\"\n", TDEApplication::kde_appsdir().data()); - printf("kde_icondir=\\"%s\\"\n", TDEApplication::kde_icondir().data()); - printf("kde_sounddir=\\"%s\\"\n", TDEApplication::kde_sounddir().data()); - printf("kde_datadir=\\"%s\\"\n", TDEApplication::kde_datadir().data()); - printf("kde_locale=\\"%s\\"\n", TDEApplication::kde_localedir().data()); - printf("kde_cgidir=\\"%s\\"\n", TDEApplication::kde_cgidir().data()); - printf("kde_confdir=\\"%s\\"\n", TDEApplication::kde_configdir().data()); - printf("kde_mimedir=\\"%s\\"\n", TDEApplication::kde_mimedir().data()); - printf("kde_toolbardir=\\"%s\\"\n", TDEApplication::kde_toolbardir().data()); - printf("kde_wallpaperdir=\\"%s\\"\n", - TDEApplication::kde_wallpaperdir().data()); - printf("kde_bindir=\\"%s\\"\n", TDEApplication::kde_bindir().data()); - printf("kde_partsdir=\\"%s\\"\n", TDEApplication::kde_partsdir().data()); - printf("kde_servicesdir=\\"/tmp/dummy\\"\n"); - printf("kde_servicetypesdir=\\"/tmp/dummy\\"\n"); - printf("kde_moduledir=\\"/tmp/dummy\\"\n"); - printf("kde_styledir=\\"/tmp/dummy\\"\n"); - printf("kde_widgetdir=\\"/tmp/dummy\\"\n"); - printf("xdg_appsdir=\\"/tmp/dummy\\"\n"); - printf("xdg_menudir=\\"/tmp/dummy\\"\n"); - printf("xdg_directorydir=\\"/tmp/dummy\\"\n"); - printf("kde_kcfgdir=\\"/tmp/dummy\\"\n"); - return 0; - } -EOF - - ac_save_CPPFLAGS=$CPPFLAGS - CPPFLAGS="$all_includes $CPPFLAGS" - if AC_TRY_EVAL(ac_compile); then - AC_MSG_RESULT(yes) - else - AC_MSG_ERROR([your system is not able to compile a small KDE application! -Check, if you installed the KDE header files correctly. -For more details about this problem, look at the end of config.log.]) - fi - CPPFLAGS=$ac_save_CPPFLAGS - - AC_LANG_RESTORE -]) - -AC_DEFUN([KDE_CHECK_KDEQTADDON], -[ -AC_MSG_CHECKING(for kde-qt-addon) -AC_CACHE_VAL(kde_cv_have_kdetqtaddon, -[ - kde_ldflags_safe="$LDFLAGS" - kde_libs_safe="$LIBS" - kde_cxxflags_safe="$CXXFLAGS" - - LIBS="-lkde-qt-addon $LIBTQT $LIBS" - CXXFLAGS="$CXXFLAGS -I$prefix/include -I$prefix/include/tde $all_includes" - LDFLAGS="$LDFLAGS $all_libraries $USER_LDFLAGS" - - AC_TRY_LINK([ - #include - ], - [ - QDomDocument doc; - ], - kde_cv_have_kdetqtaddon=yes, - kde_cv_have_kdetqtaddon=no - ) - - LDFLAGS=$kde_ldflags_safe - LIBS=$kde_libs_safe - CXXFLAGS=$kde_cxxflags_safe -]) - -AC_MSG_RESULT($kde_cv_have_kdetqtaddon) - -if test "$kde_cv_have_kdetqtaddon" = "no"; then - AC_MSG_ERROR([Can't find libkde-qt-addon. You need to install it first. -It is a separate package (and CVS module) named kde-qt-addon.]) -fi -]) - -AC_DEFUN([KDE_CREATE_LIBS_ALIASES], -[ - AC_REQUIRE([KDE_MISC_TESTS]) - AC_REQUIRE([KDE_CHECK_LIBDL]) - AC_REQUIRE([K_PATH_X]) - -if test $kde_qtver = 3; then - case $host in - *cygwin*) lib_kded="-ltdeinit_kded" ;; - *) lib_kded="" ;; - esac - AC_SUBST(LIB_KDED, $lib_kded) - AC_SUBST(LIB_TDECORE, "-ltdecore") - AC_SUBST(LIB_TDEUI, "-ltdeui") - AC_SUBST(LIB_TDEIO, "-ltdeio") - AC_SUBST(LIB_KJS, "-lkjs") - AC_SUBST(LIB_SMB, "-lsmb") - AC_SUBST(LIB_KAB, "-lkab") - AC_SUBST(LIB_KABC, "-ltdeabc") - AC_SUBST(LIB_TDEHTML, "-ltdehtml") - AC_SUBST(LIB_TDESPELL, "-ltdespell") - AC_SUBST(LIB_TDEPARTS, "-ltdeparts") - AC_SUBST(LIB_TDEPRINT, "-ltdeprint") - AC_SUBST(LIB_TDEUTILS, "-ltdeutils") - AC_SUBST(LIB_TDEPIM, "-ltdepim") - AC_SUBST(LIB_TDEIMPROXY, "-ltdeimproxy") - AC_SUBST(LIB_KNEWSTUFF, "-lknewstuff") - AC_SUBST(LIB_TDEDNSSD, "-ltdednssd") - AC_SUBST(LIB_TDEUNITTEST, "-ltdeunittest") -# these are for backward compatibility - AC_SUBST(LIB_TDESYCOCA, "-ltdeio") - AC_SUBST(LIB_KFILE, "-ltdeio") -elif test $kde_qtver = 2; then - AC_SUBST(LIB_TDECORE, "-ltdecore") - AC_SUBST(LIB_TDEUI, "-ltdeui") - AC_SUBST(LIB_TDEIO, "-ltdeio") - AC_SUBST(LIB_TDESYCOCA, "-ltdesycoca") - AC_SUBST(LIB_SMB, "-lsmb") - AC_SUBST(LIB_KFILE, "-ltdefile") - AC_SUBST(LIB_KAB, "-lkab") - AC_SUBST(LIB_TDEHTML, "-ltdehtml") - AC_SUBST(LIB_TDESPELL, "-ltdespell") - AC_SUBST(LIB_TDEPARTS, "-ltdeparts") - AC_SUBST(LIB_TDEPRINT, "-ltdeprint") -else - AC_SUBST(LIB_TDECORE, "-ltdecore -lXext $(LIB_TQT)") - AC_SUBST(LIB_TDEUI, "-ltdeui $(LIB_TDECORE)") - AC_SUBST(LIB_KFM, "-lkfm $(LIB_TDECORE)") - AC_SUBST(LIB_KFILE, "-ltdefile $(LIB_KFM) $(LIB_TDEUI)") - AC_SUBST(LIB_KAB, "-lkab $(LIB_KIMGIO) $(LIB_TDECORE)") -fi -]) - -AC_DEFUN([AC_PATH_KDE], -[ - AC_BASE_PATH_KDE - AC_ARG_ENABLE(path-check,AC_HELP_STRING([--disable-path-check],[don't try to find out, where to install]), - [ - if test "$enableval" = "no"; - then ac_use_path_checking="default" - else ac_use_path_checking="" - fi - ], - [ - if test "$kde_qtver" = 1; - then ac_use_path_checking="" - else ac_use_path_checking="default" - fi - ] - ) - - AC_CREATE_KFSSTND($ac_use_path_checking) - - AC_SUBST_KFSSTND - KDE_CREATE_LIBS_ALIASES -]) - -dnl KDE_CHECK_FUNC_EXT(, [headers], [sample-use], [C prototype], [autoheader define], [call if found]) -AC_DEFUN([KDE_CHECK_FUNC_EXT], -[ -AC_MSG_CHECKING(for $1) -AC_CACHE_VAL(kde_cv_func_$1, -[ -AC_LANG_SAVE -AC_LANG_CPLUSPLUS -save_CXXFLAGS="$CXXFLAGS" -kde_safe_LIBS="$LIBS" -LIBS="$LIBS $X_EXTRA_LIBS" -if test "$GXX" = "yes"; then -CXXFLAGS="$CXXFLAGS -pedantic-errors" -fi -AC_TRY_COMPILE([ -$2 -], -[ -$3 -], -kde_cv_func_$1=yes, -kde_cv_func_$1=no) -CXXFLAGS="$save_CXXFLAGS" -LIBS="$kde_safe_LIBS" -AC_LANG_RESTORE -]) - -AC_MSG_RESULT($kde_cv_func_$1) - -AC_MSG_CHECKING([if $1 needs custom prototype]) -AC_CACHE_VAL(kde_cv_proto_$1, -[ -if test "x$kde_cv_func_$1" = xyes; then - kde_cv_proto_$1=no -else - case "$1" in - setenv|unsetenv|usleep|random|srandom|seteuid|mkstemps|mkstemp|revoke|vsnprintf|strlcpy|strlcat) - kde_cv_proto_$1="yes - in libtdefakes" - ;; - *) - kde_cv_proto_$1=unknown - ;; - esac -fi - -if test "x$kde_cv_proto_$1" = xunknown; then - -AC_LANG_SAVE -AC_LANG_CPLUSPLUS - kde_safe_libs=$LIBS - LIBS="$LIBS $X_EXTRA_LIBS" - AC_TRY_LINK([ -$2 - -extern "C" $4; -], -[ -$3 -], -[ kde_cv_func_$1=yes - kde_cv_proto_$1=yes ], - [kde_cv_proto_$1="$1 unavailable"] -) -LIBS=$kde_safe_libs -AC_LANG_RESTORE -fi -]) -AC_MSG_RESULT($kde_cv_proto_$1) - -if test "x$kde_cv_func_$1" = xyes; then - AC_DEFINE(HAVE_$5, 1, [Define if you have $1]) - $6 -fi -if test "x$kde_cv_proto_$1" = xno; then - AC_DEFINE(HAVE_$5_PROTO, 1, - [Define if you have the $1 prototype]) -fi - -AH_VERBATIM([_HAVE_$5_PROTO], -[ -#if !defined(HAVE_$5_PROTO) -#ifdef __cplusplus -extern "C" { -#endif -$4; -#ifdef __cplusplus -} -#endif -#endif -]) -]) - -AC_DEFUN([AC_CHECK_SETENV], -[ - KDE_CHECK_FUNC_EXT(setenv, [ -#include -], - [setenv("VAR", "VALUE", 1);], - [int setenv (const char *, const char *, int)], - [SETENV]) -]) - -AC_DEFUN([AC_CHECK_UNSETENV], -[ - KDE_CHECK_FUNC_EXT(unsetenv, [ -#include -], - [unsetenv("VAR");], - [void unsetenv (const char *)], - [UNSETENV]) -]) - -AC_DEFUN([AC_CHECK_GETDOMAINNAME], -[ - KDE_CHECK_FUNC_EXT(getdomainname, [ -#include -#include -#include -], - [ -char buffer[200]; -getdomainname(buffer, 200); -], - [#include - int getdomainname (char *, size_t)], - [GETDOMAINNAME]) -]) - -AC_DEFUN([AC_CHECK_GETHOSTNAME], -[ - KDE_CHECK_FUNC_EXT(gethostname, [ -#include -#include -], - [ -char buffer[200]; -gethostname(buffer, 200); -], - [int gethostname (char *, unsigned int)], - [GETHOSTNAME]) -]) - -AC_DEFUN([AC_CHECK_USLEEP], -[ - KDE_CHECK_FUNC_EXT(usleep, [ -#include -], - [ -usleep(200); -], - [int usleep (unsigned int)], - [USLEEP]) -]) - - -AC_DEFUN([AC_CHECK_RANDOM], -[ - KDE_CHECK_FUNC_EXT(random, [ -#include -], - [ -random(); -], - [long int random(void)], - [RANDOM]) - - KDE_CHECK_FUNC_EXT(srandom, [ -#include -], - [ -srandom(27); -], - [void srandom(unsigned int)], - [SRANDOM]) - -]) - -AC_DEFUN([AC_CHECK_INITGROUPS], -[ - KDE_CHECK_FUNC_EXT(initgroups, [ -#include -#include -#include -], - [ -char buffer[200]; -initgroups(buffer, 27); -], - [int initgroups(const char *, gid_t)], - [INITGROUPS]) -]) - -AC_DEFUN([AC_CHECK_MKSTEMPS], -[ - KDE_CHECK_FUNC_EXT(mkstemps, [ -#include -#include -], - [ -mkstemps("/tmp/aaaXXXXXX", 6); -], - [int mkstemps(char *, int)], - [MKSTEMPS]) -]) - -AC_DEFUN([AC_CHECK_MKSTEMP], -[ - KDE_CHECK_FUNC_EXT(mkstemp, [ -#include -#include -], - [ -mkstemp("/tmp/aaaXXXXXX"); -], - [int mkstemp(char *)], - [MKSTEMP]) -]) - -AC_DEFUN([AC_CHECK_MKDTEMP], -[ - KDE_CHECK_FUNC_EXT(mkdtemp, [ -#include -#include -], - [ -mkdtemp("/tmp/aaaXXXXXX"); -], - [char *mkdtemp(char *)], - [MKDTEMP]) -]) - - -AC_DEFUN([AC_CHECK_RES_INIT], -[ - AC_MSG_CHECKING([if res_init needs -lresolv]) - kde_libs_safe="$LIBS" - LIBS="$LIBS $X_EXTRA_LIBS -lresolv" - AC_TRY_LINK( - [ -#include -#include -#include -#include - ], - [ - res_init(); - ], - [ - LIBRESOLV="-lresolv" - AC_MSG_RESULT(yes) - AC_DEFINE(HAVE_RES_INIT, 1, [Define if you have the res_init function]) - ], - [ AC_MSG_RESULT(no) ] - ) - LIBS=$kde_libs_safe - AC_SUBST(LIBRESOLV) - - KDE_CHECK_FUNC_EXT(res_init, - [ -#include -#include -#include -#include - ], - [res_init()], - [int res_init(void)], - [RES_INIT]) -]) - -AC_DEFUN([AC_CHECK_STRLCPY], -[ - KDE_CHECK_FUNC_EXT(strlcpy, [ -#include -], -[ char buf[20]; - strlcpy(buf, "KDE function test", sizeof(buf)); -], - [unsigned long strlcpy(char*, const char*, unsigned long)], - [STRLCPY]) -]) - -AC_DEFUN([AC_CHECK_STRLCAT], -[ - KDE_CHECK_FUNC_EXT(strlcat, [ -#include -], -[ char buf[20]; - buf[0]='\0'; - strlcat(buf, "KDE function test", sizeof(buf)); -], - [unsigned long strlcat(char*, const char*, unsigned long)], - [STRLCAT]) -]) - -AC_DEFUN([AC_CHECK_RES_QUERY], -[ - KDE_CHECK_FUNC_EXT(res_query, [ -#include -#include -#include -#include -#include -], -[ -res_query(NULL, 0, 0, NULL, 0); -], - [int res_query(const char *, int, int, unsigned char *, int)], - [RES_QUERY]) -]) - -AC_DEFUN([AC_CHECK_DN_SKIPNAME], -[ - KDE_CHECK_FUNC_EXT(dn_skipname, [ -#include -#include -#include -#include -], -[ -dn_skipname (NULL, NULL); -], - [int dn_skipname (unsigned char *, unsigned char *)], - [DN_SKIPNAME]) -]) - - -AC_DEFUN([AC_FIND_GIF], - [AC_MSG_CHECKING([for giflib]) -AC_CACHE_VAL(ac_cv_lib_gif, -[ac_save_LIBS="$LIBS" -if test "x$kde_use_qt_emb" != "xyes" && test "x$kde_use_qt_mac" != "xyes"; then -LIBS="$all_libraries -lgif -lX11 $LIBSOCKET" -else -LIBS="$all_libraries -lgif" -fi -AC_TRY_LINK(dnl -[ -#ifdef __cplusplus -extern "C" { -#endif -int GifLastError(void); -#ifdef __cplusplus -} -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -], - [return GifLastError();], - eval "ac_cv_lib_gif=yes", - eval "ac_cv_lib_gif=no") -LIBS="$ac_save_LIBS" -])dnl -if eval "test \"`echo $ac_cv_lib_gif`\" = yes"; then - AC_MSG_RESULT(yes) - AC_DEFINE_UNQUOTED(HAVE_LIBGIF, 1, [Define if you have libgif]) -else - AC_MSG_ERROR(You need giflib30. Please install the tdesupport package) -fi -]) - -AC_DEFUN([KDE_FIND_JPEG_HELPER], -[ -AC_MSG_CHECKING([for libjpeg$2]) -AC_CACHE_VAL(ac_cv_lib_jpeg_$1, -[ -ac_save_LIBS="$LIBS" -LIBS="$all_libraries $USER_LDFLAGS -ljpeg$2 -lm" -ac_save_CFLAGS="$CFLAGS" -CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" -AC_TRY_LINK( -[ -#ifdef __cplusplus -extern "C" { -#endif -void jpeg_CreateDecompress(); -#ifdef __cplusplus -} -#endif -], -[jpeg_CreateDecompress();], - eval "ac_cv_lib_jpeg_$1=-ljpeg$2", - eval "ac_cv_lib_jpeg_$1=no") -LIBS="$ac_save_LIBS" -CFLAGS="$ac_save_CFLAGS" -]) - -if eval "test ! \"`echo $ac_cv_lib_jpeg_$1`\" = no"; then - LIBJPEG="$ac_cv_lib_jpeg_$1" - AC_MSG_RESULT($ac_cv_lib_jpeg_$1) -else - AC_MSG_RESULT(no) - $3 -fi - -]) - -AC_DEFUN([AC_FIND_JPEG], -[ -dnl first look for libraries -KDE_FIND_JPEG_HELPER(6b, 6b, - KDE_FIND_JPEG_HELPER(normal, [], - [ - LIBJPEG= - ] - ) -) - -dnl then search the headers (can't use simply AC_TRY_xxx, as jpeglib.h -dnl requires system dependent includes loaded before it) -jpeg_incdirs="$includedir /usr/include /usr/local/include $kde_extra_includes" -AC_FIND_FILE(jpeglib.h, $jpeg_incdirs, jpeg_incdir) -test "x$jpeg_incdir" = xNO && jpeg_incdir= - -dnl if headers _and_ libraries are missing, this is no error, and we -dnl continue with a warning (the user will get no jpeg support in tdehtml) -dnl if only one is missing, it means a configuration error, but we still -dnl only warn -if test -n "$jpeg_incdir" && test -n "$LIBJPEG" ; then - AC_DEFINE_UNQUOTED(HAVE_LIBJPEG, 1, [Define if you have libjpeg]) -else - if test -n "$jpeg_incdir" || test -n "$LIBJPEG" ; then - AC_MSG_WARN([ -There is an installation error in jpeg support. You seem to have only one -of either the headers _or_ the libraries installed. You may need to either -provide correct --with-extra-... options, or the development package of -libjpeg6b. You can get a source package of libjpeg from http://www.ijg.org/ -Disabling JPEG support. -]) - else - AC_MSG_WARN([libjpeg not found. disable JPEG support.]) - fi - jpeg_incdir= - LIBJPEG= -fi - -AC_SUBST(LIBJPEG) -AH_VERBATIM(_AC_CHECK_JPEG, -[/* - * jpeg.h needs HAVE_BOOLEAN, when the system uses boolean in system - * headers and I'm too lazy to write a configure test as long as only - * unixware is related - */ -#ifdef _UNIXWARE -#define HAVE_BOOLEAN -#endif -]) -]) - -AC_DEFUN([KDE_CHECK_QT_JPEG], -[ -if test -n "$LIBJPEG"; then -AC_MSG_CHECKING([if Qt needs $LIBJPEG]) -AC_CACHE_VAL(kde_cv_qt_jpeg, -[ -AC_LANG_SAVE -AC_LANG_CPLUSPLUS -ac_save_LIBS="$LIBS" -LIBS="$all_libraries $USER_LDFLAGS $LIBTQT" -LIBS=`echo $LIBS | sed "s/$LIBJPEG//"` -ac_save_CXXFLAGS="$CXXFLAGS" -CXXFLAGS="$CXXFLAGS $all_includes $USER_INCLUDES" -AC_TRY_LINK( -[#include ], - [ - int argc; - char** argv; - QApplication app(argc, argv);], - eval "kde_cv_qt_jpeg=no", - eval "kde_cv_qt_jpeg=yes") -LIBS="$ac_save_LIBS" -CXXFLAGS="$ac_save_CXXFLAGS" -AC_LANG_RESTORE -fi -]) - -if eval "test ! \"`echo $kde_cv_qt_jpeg`\" = no"; then - AC_MSG_RESULT(yes) - LIBJPEG_QT='$(LIBJPEG)' -else - AC_MSG_RESULT(no) - LIBJPEG_QT= -fi - -]) - -AC_DEFUN([AC_FIND_ZLIB], -[ -AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) -AC_MSG_CHECKING([for libz]) -AC_CACHE_VAL(ac_cv_lib_z, -[ -kde_save_LIBS="$LIBS" -LIBS="$all_libraries $USER_LDFLAGS -lz $LIBSOCKET" -kde_save_CFLAGS="$CFLAGS" -CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" -AC_TRY_LINK(dnl -[ -#include -#include -], -[ - char buf[42]; - gzFile f = (gzFile) 0; - /* this would segfault.. but we only link, don't run */ - (void) gzgets(f, buf, sizeof(buf)); - - return (strcmp(zlibVersion(), ZLIB_VERSION) == 0); -], - eval "ac_cv_lib_z='-lz'", - eval "ac_cv_lib_z=no") -LIBS="$kde_save_LIBS" -CFLAGS="$kde_save_CFLAGS" -])dnl -if test ! "$ac_cv_lib_z" = no; then - AC_DEFINE_UNQUOTED(HAVE_LIBZ, 1, [Define if you have libz]) - LIBZ="$ac_cv_lib_z" - AC_MSG_RESULT($ac_cv_lib_z) -else - AC_MSG_ERROR(not found. - Possibly configure picks up an outdated version - installed by XFree86. Remove it from your system. - - Check your installation and look into config.log) - LIBZ="" -fi -AC_SUBST(LIBZ) -]) - -AC_DEFUN([KDE_TRY_TIFFLIB], -[ -AC_MSG_CHECKING([for libtiff $1]) - -AC_CACHE_VAL(kde_cv_libtiff_$1, -[ -AC_LANG_SAVE -AC_LANG_CPLUSPLUS -kde_save_LIBS="$LIBS" -if test "x$kde_use_qt_emb" != "xyes" && test "x$kde_use_qt_mac" != "xyes"; then -LIBS="$all_libraries $USER_LDFLAGS -l$1 $LIBJPEG $LIBZ -lX11 $LIBSOCKET -lm" -else -LIBS="$all_libraries $USER_LDFLAGS -l$1 $LIBJPEG $LIBZ -lm" -fi -kde_save_CXXFLAGS="$CXXFLAGS" -CXXFLAGS="$CXXFLAGS $all_includes $USER_INCLUDES" - -AC_TRY_LINK(dnl -[ -#include -], - [return (TIFFOpen( "", "r") == 0); ], -[ - kde_cv_libtiff_$1="-l$1 $LIBJPEG $LIBZ" -], [ - kde_cv_libtiff_$1=no -]) - -LIBS="$kde_save_LIBS" -CXXFLAGS="$kde_save_CXXFLAGS" -AC_LANG_RESTORE -]) - -if test "$kde_cv_libtiff_$1" = "no"; then - AC_MSG_RESULT(no) - LIBTIFF="" - $3 -else - LIBTIFF="$kde_cv_libtiff_$1" - AC_MSG_RESULT(yes) - AC_DEFINE_UNQUOTED(HAVE_LIBTIFF, 1, [Define if you have libtiff]) - $2 -fi - -]) - -AC_DEFUN([AC_FIND_TIFF], -[ -AC_REQUIRE([K_PATH_X]) -AC_REQUIRE([AC_FIND_ZLIB]) -AC_REQUIRE([AC_FIND_JPEG]) -AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) - -KDE_TRY_TIFFLIB(tiff, [], - KDE_TRY_TIFFLIB(tiff34)) - -AC_SUBST(LIBTIFF) -]) - -AC_DEFUN([KDE_FIND_LIBEXR], -[ -AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) -AC_REQUIRE([AC_FIND_ZLIB]) -AC_CACHE_VAL(ac_cv_libexr, -[ - if test -z "$PKG_CONFIG"; then - AC_PATH_PROG(PKG_CONFIG, pkg-config, no) - fi - - AC_MSG_CHECKING([for OpenEXR libraries]) - - if test "$PKG_CONFIG" = "no" ; then - AC_MSG_RESULT(no) - echo "*** The pkg-config script could not be found. Make sure it is" - echo "*** in your path, or set the PKG_CONFIG environment variable" - echo "*** to the full path to pkg-config." - echo "*** Or see http://www.freedesktop.org/software/pkgconfig to get pkg-config." - else - if ! $PKG_CONFIG --exists OpenEXR ; then - AC_MSG_RESULT(no) - EXRSTATUS=no - else - if ! $PKG_CONFIG --atleast-version="1.1.1" OpenEXR ; then - AC_MSG_RESULT(no) - EXRSTATUS=old - else - kde_save_LIBS="$LIBS" - LIBS="$LIBS $all_libraries $USER_LDFLAGS `pkg-config --libs OpenEXR` $LIBZ" - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - kde_save_CXXFLAGS="$CXXFLAGS" - EXR_FLAGS=`$PKG_CONFIG --cflags OpenEXR` - CXXFLAGS="$CXXFLAGS $all_includes $USER_INCLUDES $EXR_FLAGS" - - AC_TRY_LINK(dnl - [ - #include - ], - [ - using namespace Imf; - RgbaInputFile file ("dummy"); - return 0; - ], - eval "ac_cv_libexr='`pkg-config --libs OpenEXR`'", - eval "ac_cv_libexr=no" - ) - LIBS="$kde_save_LIBS" - CXXFLAGS="$kde_save_CXXFLAGS" - AC_LANG_RESTORE - ])dnl - if eval "test ! \"`echo $ac_cv_libexr`\" = no"; then - AC_DEFINE_UNQUOTED(HAVE_EXR, 1, [Define if you have OpenEXR]) - LIB_EXR="$ac_cv_libexr" - AC_MSG_RESULT($ac_cv_libexr) - else - AC_MSG_RESULT(no) - LIB_EXR="" - fi - fi - fi - fi - AC_SUBST(LIB_EXR) - AC_SUBST(EXR_FLAGS) -]) - - - -AC_DEFUN([AC_FIND_PNG], -[ -AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) -AC_REQUIRE([AC_FIND_ZLIB]) -AC_MSG_CHECKING([for libpng]) -AC_CACHE_VAL(ac_cv_lib_png, -[ -kde_save_LIBS="$LIBS" -if test "x$kde_use_qt_emb" != "xyes" && test "x$kde_use_qt_mac" != "xyes"; then -LIBS="$LIBS $all_libraries $USER_LDFLAGS -lpng $LIBZ -lm -lX11 $LIBSOCKET" -else -LIBS="$LIBS $all_libraries $USER_LDFLAGS -lpng $LIBZ -lm" -fi -kde_save_CFLAGS="$CFLAGS" -CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" - -AC_TRY_LINK(dnl - [ - #include - ], - [ - png_structp png_ptr = png_create_read_struct( /* image ptr */ - PNG_LIBPNG_VER_STRING, 0, 0, 0 ); - return( png_ptr != 0 ); - ], - eval "ac_cv_lib_png='-lpng $LIBZ -lm'", - eval "ac_cv_lib_png=no" -) -LIBS="$kde_save_LIBS" -CFLAGS="$kde_save_CFLAGS" -])dnl -if eval "test ! \"`echo $ac_cv_lib_png`\" = no"; then - AC_DEFINE_UNQUOTED(HAVE_LIBPNG, 1, [Define if you have libpng]) - LIBPNG="$ac_cv_lib_png" - AC_SUBST(LIBPNG) - AC_MSG_RESULT($ac_cv_lib_png) -else - AC_MSG_RESULT(no) - LIBPNG="" - AC_SUBST(LIBPNG) -fi -]) - - -AC_DEFUN([AC_FIND_JASPER], -[ -AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) -AC_REQUIRE([AC_FIND_JPEG]) -AC_MSG_CHECKING([for jasper]) -AC_CACHE_VAL(ac_cv_jasper, -[ -kde_save_LIBS="$LIBS" -LIBS="$LIBS $all_libraries $USER_LDFLAGS -ljasper $LIBJPEG -lm" -kde_save_CFLAGS="$CFLAGS" -CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" - -AC_TRY_LINK(dnl - [ - #include - ], - [ - return( jas_init() ); - ], - eval "ac_cv_jasper='-ljasper $LIBJPEG -lm'", - eval "ac_cv_jasper=no" -) -LIBS="$kde_save_LIBS" -CFLAGS="$kde_save_CFLAGS" -])dnl -if eval "test ! \"`echo $ac_cv_jasper`\" = no"; then - AC_DEFINE_UNQUOTED(HAVE_JASPER, 1, [Define if you have jasper]) - LIB_JASPER="$ac_cv_jasper" - AC_MSG_RESULT($ac_cv_jasper) -else - AC_MSG_RESULT(no) - LIB_JASPER="" -fi -AC_SUBST(LIB_JASPER) -]) - -AC_DEFUN([AC_CHECK_BOOL], -[ - AC_DEFINE_UNQUOTED(HAVE_BOOL, 1, [You _must_ have bool]) -]) - -AC_DEFUN([KDE_CHECK_COMPILER_FLAG], -[ -AC_MSG_CHECKING([whether $CXX supports -$1]) -kde_cache=`echo $1 | sed 'y% .=/+-,%____p__%'` -AC_CACHE_VAL(kde_cv_prog_cxx_$kde_cache, -[ - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - save_CXXFLAGS="$CXXFLAGS" - CXXFLAGS="$CXXFLAGS -$1" - AC_TRY_LINK([],[ return 0; ], [eval "kde_cv_prog_cxx_$kde_cache=yes"], []) - CXXFLAGS="$save_CXXFLAGS" - AC_LANG_RESTORE -]) -if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then - AC_MSG_RESULT(yes) - : - $2 -else - AC_MSG_RESULT(no) - : - $3 -fi -]) - -AC_DEFUN([KDE_CHECK_C_COMPILER_FLAG], -[ -AC_MSG_CHECKING([whether $CC supports -$1]) -kde_cache=`echo $1 | sed 'y% .=/+-,%____p__%'` -AC_CACHE_VAL(kde_cv_prog_cc_$kde_cache, -[ - AC_LANG_SAVE - AC_LANG_C - save_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -$1" - AC_TRY_LINK([],[ return 0; ], [eval "kde_cv_prog_cc_$kde_cache=yes"], []) - CFLAGS="$save_CFLAGS" - AC_LANG_RESTORE -]) -if eval "test \"`echo '$kde_cv_prog_cc_'$kde_cache`\" = yes"; then - AC_MSG_RESULT(yes) - : - $2 -else - AC_MSG_RESULT(no) - : - $3 -fi -]) - - -dnl AC_REMOVE_FORBIDDEN removes forbidden arguments from variables -dnl use: AC_REMOVE_FORBIDDEN(CC, [-forbid -bad-option whatever]) -dnl it's all white-space separated -AC_DEFUN([AC_REMOVE_FORBIDDEN], -[ __val=$$1 - __forbid=" $2 " - if test -n "$__val"; then - __new="" - ac_save_IFS=$IFS - IFS=" " - for i in $__val; do - case "$__forbid" in - *" $i "*) AC_MSG_WARN([found forbidden $i in $1, removing it]) ;; - *) # Careful to not add spaces, where there were none, because otherwise - # libtool gets confused, if we change e.g. CXX - if test -z "$__new" ; then __new=$i ; else __new="$__new $i" ; fi ;; - esac - done - IFS=$ac_save_IFS - $1=$__new - fi -]) - - -AC_DEFUN([KDE_CHECK_FOR_BAD_COMPILER], -[ - AC_MSG_CHECKING([whether $CC is blacklisted]) - - dnl In theory we have tu run this test against $CC and $CXX - dnl in C and in C++ mode, because its perfectly legal for - dnl the user to mix compiler versions, since C has a defined - dnl ABI. - dnl - dnl For now, we assume the user is not on crack. - - AC_TRY_COMPILE([ -#ifdef __GNUC__ -#if __GNUC__ == 4 && __GNUC_MINOR__ == 0 && __GNUC_PATCHLEVEL__ == 0 -choke me -#endif -#endif -], , - kde_bad_compiler=no, - kde_bad_compiler=yes -) - - AC_MSG_RESULT($kde_bad_compiler) - -if test "$kde_bad_compiler" = "yes"; then - AC_MSG_ERROR([ - -This particular compiler version is blacklisted because it -is known to miscompile KDE. Please use a newer version, or -if that is not yet available, choose an older version. - -Please do not report a bug or bother us reporting this -configure error. We know about it, and we introduced -it by intention to avoid untraceable bugs or crashes in KDE. - -]) -fi - -]) - - -AC_DEFUN([KDE_CHECK_FOR_OPT_NOINLINE_MATCH], -[ - AC_CACHE_CHECK([whether system headers can cope with -O2 -fno-inline], - kde_cv_opt_noinline_match, - [ - kde_cv_opt_noinline_match=irrelevant - dnl if we don't use both -O2 and -fno-inline, this check is moot - if echo "$CFLAGS" | grep -e -O2 >/dev/null 2>/dev/null \ - && echo "$CFLAGS" | grep -e -fno-inline >/dev/null 2>/dev/null ; then - - ac_cflags_save="$CFLAGS" - CFLAGS="$CFLAGS -D_USE_GNU" - - AC_TRY_LINK([ - #include -], [ const char *pt, *et; - et = __extension__ ({ char __a0, __a1, __a2; (__builtin_constant_p ( ";," ) && ((size_t)(const void *)(( ";," )+ 1) - (size_t)(const void *)( ";," ) == 1) ? ((__a0 =((__const char *) ( ";," ))[0], __a0 == '\0') ? ((void) ( pt ),((void *)0) ) : ((__a1 = ((__const char *) ( ";," ))[1], __a1== '\0') ? (__extension__ (__builtin_constant_p ( __a0 ) && ( __a0 ) == '\0' ? (char *) __rawmemchr ( pt , __a0) : strchr( pt , __a0 ))) : ((__a2 = ((__const char *) ( ";," ))[2], __a2 == '\0') ? __strpbrk_c2 ( pt , __a0, __a1) :(((__const char *) ( ";," ))[3] == '\0' ? __strpbrk_c3 ( pt ,__a0, __a1, __a2): strpbrk ( pt , ";," ))))) : strpbrk ( pt , ";," )); }) ; -], - kde_cv_opt_noinline_match=yes, - kde_cv_opt_noinline_match=no - ) - - CFLAGS="$ac_cflags_save" - fi - ]) -]) - - -dnl AC_VALIDIFY_CXXFLAGS checks for forbidden flags the user may have given -AC_DEFUN([AC_VALIDIFY_CXXFLAGS], -[dnl -if test "x$kde_use_qt_emb" != "xyes"; then - AC_REMOVE_FORBIDDEN(CXX, [-fno-rtti -rpath]) - AC_REMOVE_FORBIDDEN(CXXFLAGS, [-fno-rtti -rpath]) -else - AC_REMOVE_FORBIDDEN(CXX, [-rpath]) - AC_REMOVE_FORBIDDEN(CXXFLAGS, [-rpath]) -fi -]) - -AC_DEFUN([AC_CHECK_COMPILERS], -[ - AC_ARG_ENABLE(debug, - AC_HELP_STRING([--enable-debug=ARG],[enables debug symbols (yes|no|full) [default=no]]), - [ - case $enableval in - yes) - kde_use_debug_code="yes" - kde_use_debug_define=no - ;; - full) - kde_use_debug_code="full" - kde_use_debug_define=no - ;; - *) - kde_use_debug_code="no" - kde_use_debug_define=yes - ;; - esac - ], - [kde_use_debug_code="no" - kde_use_debug_define=no - ]) - - dnl Just for configure --help - AC_ARG_ENABLE(dummyoption, - AC_HELP_STRING([--disable-debug], - [disables debug output and debug symbols [default=no]]), - [],[]) - - AC_ARG_ENABLE(strict, - AC_HELP_STRING([--enable-strict], - [compiles with strict compiler options (may not work!)]), - [ - if test $enableval = "no"; then - kde_use_strict_options="no" - else - kde_use_strict_options="yes" - fi - ], [kde_use_strict_options="no"]) - - AC_ARG_ENABLE(warnings,AC_HELP_STRING([--disable-warnings],[disables compilation with -Wall and similar]), - [ - if test $enableval = "no"; then - kde_use_warnings="no" - else - kde_use_warnings="yes" - fi - ], [kde_use_warnings="yes"]) - - dnl enable warnings for debug build - if test "$kde_use_debug_code" != "no"; then - kde_use_warnings=yes - fi - - AC_ARG_ENABLE(profile,AC_HELP_STRING([--enable-profile],[creates profiling infos [default=no]]), - [kde_use_profiling=$enableval], - [kde_use_profiling="no"] - ) - - dnl this prevents stupid AC_PROG_CC to add "-g" to the default CFLAGS - CFLAGS=" $CFLAGS" - - AC_PROG_CC - - AC_PROG_CPP - - if test "$GCC" = "yes"; then - if test "$kde_use_debug_code" != "no"; then - if test $kde_use_debug_code = "full"; then - CFLAGS="-g3 -fno-inline $CFLAGS" - else - CFLAGS="-g -O2 -fno-schedule-insns -fno-inline $CFLAGS" - fi - else - CFLAGS="-O2 $CFLAGS" - fi - fi - - if test "$kde_use_debug_define" = "yes"; then - CFLAGS="-DNDEBUG $CFLAGS" - fi - - - case "$host" in - *-*-sysv4.2uw*) CFLAGS="-D_UNIXWARE $CFLAGS";; - *-*-sysv5uw7*) CFLAGS="-D_UNIXWARE7 $CFLAGS";; - esac - - if test -z "$LDFLAGS" && test "$kde_use_debug_code" = "no" && test "$GCC" = "yes"; then - LDFLAGS="" - fi - - CXXFLAGS=" $CXXFLAGS" - - AC_PROG_CXX - - KDE_CHECK_FOR_BAD_COMPILER - - if test "$GXX" = "yes" || test "$CXX" = "KCC"; then - if test "$kde_use_debug_code" != "no"; then - if test "$CXX" = "KCC"; then - CXXFLAGS="+K0 -Wall -pedantic -W -Wpointer-arith -Wwrite-strings $CXXFLAGS" - else - if test "$kde_use_debug_code" = "full"; then - CXXFLAGS="-g3 -fno-inline $CXXFLAGS" - else - CXXFLAGS="-g -O2 -fno-schedule-insns -fno-inline $CXXFLAGS" - fi - fi - KDE_CHECK_COMPILER_FLAG(fno-builtin,[CXXFLAGS="-fno-builtin $CXXFLAGS"]) - - dnl convenience compiler flags - KDE_CHECK_COMPILER_FLAG(Woverloaded-virtual, [WOVERLOADED_VIRTUAL="-Woverloaded-virtual"], [WOVERLOADED_VRITUAL=""]) - AC_SUBST(WOVERLOADED_VIRTUAL) - else - if test "$CXX" = "KCC"; then - CXXFLAGS="+K3 $CXXFLAGS" - else - CXXFLAGS="-O2 $CXXFLAGS" - fi - fi - fi - - if test "$kde_use_debug_define" = "yes"; then - CXXFLAGS="-DNDEBUG -DNO_DEBUG $CXXFLAGS" - fi - - if test "$kde_use_profiling" = "yes"; then - KDE_CHECK_COMPILER_FLAG(pg, - [ - CFLAGS="-pg $CFLAGS" - CXXFLAGS="-pg $CXXFLAGS" - ]) - fi - - if test "$kde_use_warnings" = "yes"; then - if test "$GCC" = "yes"; then - CXXFLAGS="-Wall -W -Wpointer-arith $CXXFLAGS" - case $host in - *-*-linux-gnu) - CFLAGS="-std=iso9899:1990 -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_DEFAULT_SOURCE $CFLAGS" - CXXFLAGS="-ansi -D_XOPEN_SOURCE=500 -D_DEFAULT_SOURCE -Wcast-align -Wchar-subscripts $CXXFLAGS" - KDE_CHECK_COMPILER_FLAG(Wmissing-format-attribute, [CXXFLAGS="$CXXFLAGS -Wformat-security -Wmissing-format-attribute"]) - KDE_CHECK_C_COMPILER_FLAG(Wmissing-format-attribute, [CFLAGS="$CFLAGS -Wformat-security -Wmissing-format-attribute"]) - ;; - esac - KDE_CHECK_COMPILER_FLAG(Wundef,[CXXFLAGS="-Wundef $CXXFLAGS"]) - KDE_CHECK_COMPILER_FLAG(Wno-long-long,[CXXFLAGS="-Wno-long-long $CXXFLAGS"]) - dnl ### FIXME: revert for KDE 4 - KDE_CHECK_COMPILER_FLAG(Wno-non-virtual-dtor,[CXXFLAGS="$CXXFLAGS -Wno-non-virtual-dtor"]) - fi - fi - - if test "$GXX" = "yes" && test "$kde_use_strict_options" = "yes"; then - CXXFLAGS="-Wcast-qual -Wshadow -Wcast-align $CXXFLAGS" - fi - - AC_ARG_ENABLE(pch, - AC_HELP_STRING([--enable-pch], - [enables precompiled header support (currently only KCC or gcc >=3.4+unsermake) [default=no]]), - [ kde_use_pch=$enableval ],[ kde_use_pch=no ]) - - HAVE_GCC_VISIBILITY=0 - AC_SUBST([HAVE_GCC_VISIBILITY]) - - if test "$GXX" = "yes"; then - gcc_no_reorder_blocks=NO - KDE_CHECK_COMPILER_FLAG(fno-reorder-blocks,[gcc_no_reorder_blocks=YES]) - if test $kde_use_debug_code != "no" && \ - test $kde_use_debug_code != "full" && \ - test "YES" = "$gcc_no_reorder_blocks" ; then - CXXFLAGS="$CXXFLAGS -fno-reorder-blocks" - CFLAGS="$CFLAGS -fno-reorder-blocks" - fi - KDE_CHECK_COMPILER_FLAG(fno-exceptions,[CXXFLAGS="$CXXFLAGS -fno-exceptions"]) - KDE_CHECK_COMPILER_FLAG(fno-check-new, [CXXFLAGS="$CXXFLAGS -fno-check-new"]) - KDE_CHECK_COMPILER_FLAG(fno-common, [CXXFLAGS="$CXXFLAGS -fno-common"]) - KDE_CHECK_COMPILER_FLAG(fexceptions, [USE_EXCEPTIONS="-fexceptions"], USE_EXCEPTIONS= ) - ENABLE_PERMISSIVE_FLAG="-fpermissive" - - if test "$kde_use_pch" = "yes"; then - AC_MSG_CHECKING(whether gcc supports precompiling c header files) - echo >conftest.h - if $CC -x c-header conftest.h >/dev/null 2>/dev/null; then - kde_gcc_supports_pch=yes - AC_MSG_RESULT(yes) - else - kde_gcc_supports_pch=no - AC_MSG_RESULT(no) - fi - if test "$kde_gcc_supports_pch" = "yes"; then - AC_MSG_CHECKING(whether gcc supports precompiling c++ header files) - if $CXX -x c++-header conftest.h >/dev/null 2>/dev/null; then - kde_gcc_supports_pch=yes - AC_MSG_RESULT(yes) - else - kde_gcc_supports_pch=no - AC_MSG_RESULT(no) - fi - fi - rm -f conftest.h conftest.h.gch - fi - - KDE_CHECK_FOR_OPT_NOINLINE_MATCH - if test "x$kde_cv_opt_noinline_match" = "xno" ; then - CFLAGS="`echo "$CFLAGS" | sed "s/ -fno-inline//"`" - fi - fi - AM_CONDITIONAL(unsermake_enable_pch, test "$kde_use_pch" = "yes" && test "$kde_gcc_supports_pch" = "yes") - if test "$CXX" = "KCC"; then - dnl unfortunately we currently cannot disable exception support in KCC - dnl because doing so is binary incompatible and Qt by default links with exceptions :-( - dnl KDE_CHECK_COMPILER_FLAG(-no_exceptions,[CXXFLAGS="$CXXFLAGS --no_exceptions"]) - dnl KDE_CHECK_COMPILER_FLAG(-exceptions, [USE_EXCEPTIONS="--exceptions"], USE_EXCEPTIONS= ) - - if test "$kde_use_pch" = "yes"; then - dnl TODO: support --pch-dir! - KDE_CHECK_COMPILER_FLAG(-pch,[CXXFLAGS="$CXXFLAGS --pch"]) - dnl the below works (but the dir must exist), but it's - dnl useless for a whole package. - dnl The are precompiled headers for each source file, so when compiling - dnl from scratch, it doesn't make a difference, and they take up - dnl around ~5Mb _per_ sourcefile. - dnl KDE_CHECK_COMPILER_FLAG(-pch_dir /tmp, - dnl [CXXFLAGS="$CXXFLAGS --pch_dir `pwd`/pcheaders"]) - fi - dnl this flag controls inlining. by default KCC inlines in optimisation mode - dnl all implementations that are defined inside the class {} declaration. - dnl because of templates-compatibility with broken gcc compilers, this - dnl can cause excessive inlining. This flag limits it to a sane level - KDE_CHECK_COMPILER_FLAG(-inline_keyword_space_time=6,[CXXFLAGS="$CXXFLAGS --inline_keyword_space_time=6"]) - KDE_CHECK_COMPILER_FLAG(-inline_auto_space_time=2,[CXXFLAGS="$CXXFLAGS --inline_auto_space_time=2"]) - KDE_CHECK_COMPILER_FLAG(-inline_implicit_space_time=2.0,[CXXFLAGS="$CXXFLAGS --inline_implicit_space_time=2.0"]) - KDE_CHECK_COMPILER_FLAG(-inline_generated_space_time=2.0,[CXXFLAGS="$CXXFLAGS --inline_generated_space_time=2.0"]) - dnl Some source files are shared between multiple executables - dnl (or libraries) and some of those need template instantiations. - dnl In that case KCC needs to compile those sources with - dnl --one_instantiation_per_object. To make it easy for us we compile - dnl _all_ objects with that flag (--one_per is a shorthand). - KDE_CHECK_COMPILER_FLAG(-one_per, [CXXFLAGS="$CXXFLAGS --one_per"]) - fi - AC_SUBST(USE_EXCEPTIONS) - dnl obsolete macro - provided to keep things going - USE_RTTI= - AC_SUBST(USE_RTTI) - - case "$host" in - *-*-irix*) test "$GXX" = yes && CXXFLAGS="-D_LANGUAGE_C_PLUS_PLUS -D__LANGUAGE_C_PLUS_PLUS $CXXFLAGS" ;; - *-*-sysv4.2uw*) CXXFLAGS="-D_UNIXWARE $CXXFLAGS";; - *-*-sysv5uw7*) CXXFLAGS="-D_UNIXWARE7 $CXXFLAGS";; - *-*-solaris*) - if test "$GXX" = yes; then - libstdcpp=`$CXX -print-file-name=libstdc++.so` - if test ! -f $libstdcpp; then - AC_MSG_ERROR([You've compiled gcc without --enable-shared. This doesn't work with KDE. Please recompile gcc with --enable-shared to receive a libstdc++.so]) - fi - fi - ;; - esac - - AC_VALIDIFY_CXXFLAGS - - AC_PROG_CXXCPP - - if test "$GCC" = yes; then - NOOPT_CFLAGS=-O0 - fi - KDE_CHECK_COMPILER_FLAG(O0,[NOOPT_CXXFLAGS=-O0]) - - AC_ARG_ENABLE(coverage, - AC_HELP_STRING([--enable-coverage],[use gcc coverage testing]), [ - if test "$am_cv_CC_dependencies_compiler_type" = "gcc3"; then - ac_coverage_compiler="-fprofile-arcs -ftest-coverage" - ac_coverage_linker="-lgcc" - elif test "$am_cv_CC_dependencies_compiler_type" = "gcc"; then - ac_coverage_compiler="-fprofile-arcs -ftest-coverage" - ac_coverage_linker="" - else - AC_MSG_ERROR([coverage with your compiler is not supported]) - fi - CFLAGS="$CFLAGS $ac_coverage_compiler" - CXXFLAGS="$CXXFLAGS $ac_coverage_compiler" - LDFLAGS="$LDFLAGS $ac_coverage_linker" - ]) - - AC_SUBST(NOOPT_CXXFLAGS) - AC_SUBST(NOOPT_CFLAGS) - AC_SUBST(ENABLE_PERMISSIVE_FLAG) - - KDE_CHECK_NEW_LDFLAGS - KDE_CHECK_FINAL - KDE_CHECK_CLOSURE - KDE_CHECK_NMCHECK - - ifdef([AM_DEPENDENCIES], AC_REQUIRE([KDE_ADD_DEPENDENCIES]), []) -]) - -AC_DEFUN([KDE_CHECK_VISIBILITY_GCC_BUG], - [ - AC_CACHE_CHECK([for gcc -fvisibility-inlines-hidden bug], kde_cv_val_gcc_visibility_bug, - [ - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - - safe_CXXFLAGS=$CXXFLAGS - safe_LDFLAGS=$LDFLAGS - CXXFLAGS="$CXXFLAGS -fPIC -fvisibility-inlines-hidden -O0" - LDFLAGS="$LDFLAGS -shared -fPIC" - - AC_TRY_LINK( - [ - /* http://gcc.gnu.org/bugzilla/show_bug.cgi?id=19664 */ - #include - int some_function( void ) __attribute__ ((visibility("default"))); - int some_function( void ) - { - std::string s("blafasel"); - return 0; - } - ], [/* elvis is alive */], - kde_cv_val_gcc_visibility_bug=no, kde_cv_val_gcc_visibility_bug=yes) - - CXXFLAGS=$safe_CXXFLAGS - LDFLAGS=$safe_LDFLAGS - AC_LANG_RESTORE - ] - ) - - if test x$kde_cv_val_gcc_visibility_bug = xno; then - CXXFLAGS="$CXXFLAGS -fvisibility-inlines-hidden" - fi - ] -) - -AC_DEFUN([KDE_ENABLE_HIDDEN_VISIBILITY], -[ - AC_BEFORE([AC_PATH_TQT_1_3], [KDE_ENABLE_HIDDEN_VISIBILITY]) - - AC_MSG_CHECKING([grepping for visibility push/pop in headers]) - - if test "x$GXX" = "xyes"; then - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - AC_EGREP_CPP( - [GCC visibility push], - [ #include - ], - [ - AC_MSG_RESULT(yes) - kde_stdc_visibility_patched=yes ], - [ - AC_MSG_RESULT(no) - AC_MSG_WARN([Your libstdc++ doesn't appear to be patched for - visibility support. Disabling -fvisibility=hidden]) - - kde_stdc_visibility_patched=no ]) - - AC_LANG_RESTORE - - kde_have_gcc_visibility=no - KDE_CHECK_COMPILER_FLAG(fvisibility=hidden, - [ - kde_have_gcc_visibility=yes - dnl the whole toolchain is just a mess, gcc is just too buggy - dnl to handle STL with visibility enabled. Lets reconsider - dnl when gcc 4.2 is out or when things get fixed in the compiler. - dnl Contact mueller@kde.org for details. - AC_ARG_ENABLE(gcc-hidden-visibility, - AC_HELP_STRING([--enable-gcc-hidden-visibility],[toolchain hidden visibility [default=no]]), - [kde_have_gcc_visibility=$enableval], - [kde_have_gcc_visibility=no]) - - AC_CACHE_CHECK([if Qt is patched for -fvisibility], kde_cv_val_qt_gcc_visibility_patched, - [ - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - - safe_CXXFLAGS=$CXXFLAGS - CXXFLAGS="$CXXFLAGS $all_includes" - - AC_TRY_COMPILE( - [ -#include -#if Q_EXPORT - 0 != 0 -/* if this compiles, then Q_EXPORT is undefined */ -/* if Q_EXPORT is nonempty, this will break compilation */ -#endif - ], [/* elvis is alive */], - kde_cv_val_qt_gcc_visibility_patched=no, kde_cv_val_qt_gcc_visibility_patched=yes) - - CXXFLAGS=$safe_CXXFLAGS - AC_LANG_RESTORE - ] - ) - - if test x$kde_have_gcc_visibility = "xyes" && test x$kde_stdc_visibility_patched = "xyes" && test x$kde_cv_val_qt_gcc_visibility_patched = "xyes"; then - CXXFLAGS="$CXXFLAGS -fvisibility=hidden" - KDE_CHECK_VISIBILITY_GCC_BUG - HAVE_GCC_VISIBILITY=1 - AC_DEFINE_UNQUOTED(__KDE_HAVE_GCC_VISIBILITY, "$HAVE_GCC_VISIBILITY", [define to 1 if -fvisibility is supported]) - fi - ]) - fi -]) - -AC_DEFUN([KDE_ADD_DEPENDENCIES], -[ - [A]M_DEPENDENCIES(CC) - [A]M_DEPENDENCIES(CXX) -]) - -dnl just a wrapper to clean up configure.in -AC_DEFUN([KDE_PROG_LIBTOOL], -[ -AC_REQUIRE([AC_CHECK_COMPILERS]) -AC_REQUIRE([AC_ENABLE_SHARED]) -AC_REQUIRE([AC_ENABLE_STATIC]) - -AC_REQUIRE([AC_LIBTOOL_DLOPEN]) -AC_REQUIRE([KDE_CHECK_LIB64]) - -AC_OBJEXT -AC_EXEEXT - -AM_PROG_LIBTOOL -AC_LIBTOOL_CXX - -LIBTOOL_SHELL="/bin/sh ./libtool" -# LIBTOOL="$LIBTOOL --silent" -KDE_PLUGIN="-avoid-version -module -no-undefined \$(KDE_NO_UNDEFINED) \$(KDE_RPATH) \$(KDE_MT_LDFLAGS)" -AC_SUBST(KDE_PLUGIN) - -# This hack ensures that libtool creates shared libs for tdeunittest plugins. By default check_LTLIBRARIES makes static libs. -KDE_CHECK_PLUGIN="\$(KDE_PLUGIN) -rpath \$(libdir)" -AC_SUBST(KDE_CHECK_PLUGIN) - -# we patch configure quite some so we better keep that consistent for incremental runs -AC_SUBST(AUTOCONF,'$(SHELL) $(top_srcdir)/admin/cvs.sh configure || touch configure') -]) - -AC_DEFUN([KDE_CHECK_LIB64], -[ - AC_ARG_ENABLE(libsuffix, - AC_HELP_STRING([--enable-libsuffix], - [/lib directory suffix (64,32,none,auto[=default])]), - tdelibsuff=$enableval, tdelibsuff="auto") - - if test "$tdelibsuff" = "auto"; then - -cat > conftest.c << EOF -#include -int main() { - return 0; -} -EOF - tdelibsuff=`$CC conftest.c -o conftest.out; ldd conftest.out |sed -ne '/libc.so/{ - s,.*/lib\([[^\/]]*\)/.*,\1, - p -}'` - rm -rf conftest.* - fi - - if test "$tdelibsuff" = "no" || test "$tdelibsuff" = "none"; then - tdelibsuff= - fi - if test -z "$tdelibsuff"; then - AC_MSG_RESULT([not using lib directory suffix]) - AC_DEFINE(KDELIBSUFF, [""], Suffix for lib directories) - else - if test "$libdir" = '${exec_prefix}/lib'; then - libdir="$libdir${tdelibsuff}" - AC_SUBST([libdir], ["$libdir"]) dnl ugly hack for lib64 platforms - fi - AC_DEFINE_UNQUOTED(KDELIBSUFF, ["${tdelibsuff}"], Suffix for lib directories) - AC_MSG_RESULT([using lib directory suffix $tdelibsuff]) - fi -]) - -AC_DEFUN([KDE_CHECK_TYPES], -[ AC_CHECK_SIZEOF(int, 4)dnl - AC_CHECK_SIZEOF(short)dnl - AC_CHECK_SIZEOF(long, 4)dnl - AC_CHECK_SIZEOF(char *, 4)dnl -])dnl - -dnl Not used - kept for compat only? -AC_DEFUN([KDE_DO_IT_ALL], -[ -AC_CANONICAL_SYSTEM -AC_ARG_PROGRAM -AM_INIT_AUTOMAKE($1, $2) -AM_DISABLE_LIBRARIES -AC_PREFIX_DEFAULT(${TDEDIR:-/usr/local/kde}) -AC_CHECK_COMPILERS -KDE_PROG_LIBTOOL -AM_KDE_WITH_NLS -AC_PATH_KDE -]) - -AC_DEFUN([AC_CHECK_RPATH], -[ -AC_MSG_CHECKING(for rpath) -AC_ARG_ENABLE(rpath, - AC_HELP_STRING([--disable-rpath],[do not use the rpath feature of ld]), - USE_RPATH=$enableval, USE_RPATH=yes) - -if test -z "$KDE_RPATH" && test "$USE_RPATH" = "yes"; then - - KDE_RPATH="-R \$(libdir)" - - if test "$kde_libraries" != "$libdir"; then - KDE_RPATH="$KDE_RPATH -R \$(kde_libraries)" - fi - - if test -n "$qt_libraries"; then - KDE_RPATH="$KDE_RPATH -R \$(qt_libraries)" - fi - dnl $x_libraries is set to /usr/lib in case - if test -n "$X_LDFLAGS"; then - X_RPATH="-R \$(x_libraries)" - KDE_RPATH="$KDE_RPATH $X_RPATH" - fi - if test -n "$KDE_EXTRA_RPATH"; then - KDE_RPATH="$KDE_RPATH \$(KDE_EXTRA_RPATH)" - fi -fi -AC_SUBST(KDE_EXTRA_RPATH) -AC_SUBST(KDE_RPATH) -AC_SUBST(X_RPATH) -AC_MSG_RESULT($USE_RPATH) -]) - -dnl Check for the type of the third argument of getsockname -AC_DEFUN([AC_CHECK_SOCKLEN_T], -[ - AC_MSG_CHECKING(for socklen_t) - AC_CACHE_VAL(kde_cv_socklen_t, - [ - AC_LANG_PUSH(C++) - kde_cv_socklen_t=no - AC_TRY_COMPILE([ - #include - #include - ], - [ - socklen_t len; - getpeername(0,0,&len); - ], - [ - kde_cv_socklen_t=yes - kde_cv_socklen_t_equiv=socklen_t - ]) - AC_LANG_POP(C++) - ]) - AC_MSG_RESULT($kde_cv_socklen_t) - if test $kde_cv_socklen_t = no; then - AC_MSG_CHECKING([for socklen_t equivalent for socket functions]) - AC_CACHE_VAL(kde_cv_socklen_t_equiv, - [ - kde_cv_socklen_t_equiv=int - AC_LANG_PUSH(C++) - for t in int size_t unsigned long "unsigned long"; do - AC_TRY_COMPILE([ - #include - #include - ], - [ - $t len; - getpeername(0,0,&len); - ], - [ - kde_cv_socklen_t_equiv="$t" - break - ]) - done - AC_LANG_POP(C++) - ]) - AC_MSG_RESULT($kde_cv_socklen_t_equiv) - fi - AC_DEFINE_UNQUOTED(kde_socklen_t, $kde_cv_socklen_t_equiv, - [type to use in place of socklen_t if not defined]) - AC_DEFINE_UNQUOTED(ksize_t, $kde_cv_socklen_t_equiv, - [type to use in place of socklen_t if not defined (deprecated, use kde_socklen_t)]) -]) - -dnl This is a merge of some macros out of the gettext aclocal.m4 -dnl since we don't need anything, I took the things we need -dnl the copyright for them is: -dnl > -dnl Copyright (C) 1994, 1995, 1996, 1997, 1998 Free Software Foundation, Inc. -dnl This Makefile.in is free software; the Free Software Foundation -dnl gives unlimited permission to copy and/or distribute it, -dnl with or without modifications, as long as this notice is preserved. - -dnl This program is distributed in the hope that it will be useful, -dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without -dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A -dnl PARTICULAR PURPOSE. -dnl > -dnl for this file it is relicensed under LGPL - -AC_DEFUN([AM_KDE_WITH_NLS], - [ - dnl If we use NLS figure out what method - - AM_PATH_PROG_WITH_TEST_KDE(MSGFMT, msgfmt, - [test -n "`$ac_dir/$ac_word --version 2>&1 | grep 'GNU gettext'`"], msgfmt) - AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT) - - if test -z "`$GMSGFMT --version 2>&1 | grep 'GNU gettext'`"; then - AC_MSG_RESULT([found msgfmt program is not GNU msgfmt; ignore it]) - GMSGFMT=":" - fi - MSGFMT=$GMSGFMT - AC_SUBST(GMSGFMT) - AC_SUBST(MSGFMT) - - AM_PATH_PROG_WITH_TEST_KDE(XGETTEXT, xgettext, - [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :) - - dnl Test whether we really found GNU xgettext. - if test "$XGETTEXT" != ":"; then - dnl If it is no GNU xgettext we define it as : so that the - dnl Makefiles still can work. - if $XGETTEXT --omit-header /dev/null 2> /dev/null; then - : ; - else - AC_MSG_RESULT( - [found xgettext programs is not GNU xgettext; ignore it]) - XGETTEXT=":" - fi - fi - AC_SUBST(XGETTEXT) - - ]) - -# Search path for a program which passes the given test. -# Ulrich Drepper , 1996. - -# serial 1 -# Stephan Kulow: I appended a _KDE against name conflicts - -dnl AM_PATH_PROG_WITH_TEST_KDE(VARIABLE, PROG-TO-CHECK-FOR, -dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]]) -AC_DEFUN([AM_PATH_PROG_WITH_TEST_KDE], -[# Extract the first word of "$2", so it can be a program name with args. -set dummy $2; ac_word=[$]2 -AC_MSG_CHECKING([for $ac_word]) -AC_CACHE_VAL(ac_cv_path_$1, -[case "[$]$1" in - /*) - ac_cv_path_$1="[$]$1" # Let the user override the test with a path. - ;; - *) - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in ifelse([$5], , $PATH, [$5]); do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - if [$3]; then - ac_cv_path_$1="$ac_dir/$ac_word" - break - fi - fi - done - IFS="$ac_save_ifs" -dnl If no 4th arg is given, leave the cache variable unset, -dnl so AC_PATH_PROGS will keep looking. -ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4" -])dnl - ;; -esac])dnl -$1="$ac_cv_path_$1" -if test -n "[$]$1"; then - AC_MSG_RESULT([$]$1) -else - AC_MSG_RESULT(no) -fi -AC_SUBST($1)dnl -]) - - -# Check whether LC_MESSAGES is available in . -# Ulrich Drepper , 1995. - -# serial 1 - -AC_DEFUN([AM_LC_MESSAGES], - [if test $ac_cv_header_locale_h = yes; then - AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES, - [AC_TRY_LINK([#include ], [return LC_MESSAGES], - am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)]) - if test $am_cv_val_LC_MESSAGES = yes; then - AC_DEFINE(HAVE_LC_MESSAGES, 1, [Define if your locale.h file contains LC_MESSAGES]) - fi - fi]) - -dnl From Jim Meyering. -dnl FIXME: migrate into libit. - -AC_DEFUN([AM_FUNC_OBSTACK], -[AC_CACHE_CHECK([for obstacks], am_cv_func_obstack, - [AC_TRY_LINK([#include "obstack.h"], - [struct obstack *mem;obstack_free(mem,(char *) 0)], - am_cv_func_obstack=yes, - am_cv_func_obstack=no)]) - if test $am_cv_func_obstack = yes; then - AC_DEFINE(HAVE_OBSTACK) - else - LIBOBJS="$LIBOBJS obstack.o" - fi -]) - -dnl From Jim Meyering. Use this if you use the GNU error.[ch]. -dnl FIXME: Migrate into libit - -AC_DEFUN([AM_FUNC_ERROR_AT_LINE], -[AC_CACHE_CHECK([for error_at_line], am_cv_lib_error_at_line, - [AC_TRY_LINK([],[error_at_line(0, 0, "", 0, "");], - am_cv_lib_error_at_line=yes, - am_cv_lib_error_at_line=no)]) - if test $am_cv_lib_error_at_line = no; then - LIBOBJS="$LIBOBJS error.o" - fi - AC_SUBST(LIBOBJS)dnl -]) - -# Macro to add for using GNU gettext. -# Ulrich Drepper , 1995. - -# serial 1 -# Stephan Kulow: I put a KDE in it to avoid name conflicts - -AC_DEFUN([AM_KDE_GNU_GETTEXT], - [AC_REQUIRE([AC_PROG_MAKE_SET])dnl - AC_REQUIRE([AC_PROG_RANLIB])dnl - AC_REQUIRE([AC_HEADER_STDC])dnl - AC_REQUIRE([AC_TYPE_OFF_T])dnl - AC_REQUIRE([AC_TYPE_SIZE_T])dnl - AC_REQUIRE([AC_FUNC_ALLOCA])dnl - AC_REQUIRE([AC_FUNC_MMAP])dnl - AC_REQUIRE([AM_KDE_WITH_NLS])dnl - AC_CHECK_HEADERS([limits.h locale.h nl_types.h string.h values.h alloca.h]) - AC_CHECK_FUNCS([getcwd munmap putenv setlocale strchr strcasecmp \ -__argz_count __argz_stringify __argz_next]) - - AC_MSG_CHECKING(for stpcpy) - AC_CACHE_VAL(kde_cv_func_stpcpy, - [ - kde_safe_cxxflags=$CXXFLAGS - CXXFLAGS="-Werror" - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - AC_TRY_COMPILE([ - #include - ], - [ - char buffer[200]; - stpcpy(buffer, buffer); - ], - kde_cv_func_stpcpy=yes, - kde_cv_func_stpcpy=no) - AC_LANG_RESTORE - CXXFLAGS=$kde_safe_cxxflags - ]) - AC_MSG_RESULT($kde_cv_func_stpcpy) - if eval "test \"`echo $kde_cv_func_stpcpy`\" = yes"; then - AC_DEFINE(HAVE_STPCPY, 1, [Define if you have stpcpy]) - fi - - AM_LC_MESSAGES - - if test "x$CATOBJEXT" != "x"; then - if test "x$ALL_LINGUAS" = "x"; then - LINGUAS= - else - AC_MSG_CHECKING(for catalogs to be installed) - NEW_LINGUAS= - for lang in ${LINGUAS=$ALL_LINGUAS}; do - case "$ALL_LINGUAS" in - *$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;; - esac - done - LINGUAS=$NEW_LINGUAS - AC_MSG_RESULT($LINGUAS) - fi - - dnl Construct list of names of catalog files to be constructed. - if test -n "$LINGUAS"; then - for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done - fi - fi - - ]) - -AC_DEFUN([AC_HAVE_XPM], - [AC_REQUIRE_CPP()dnl - AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) - - test -z "$XPM_LDFLAGS" && XPM_LDFLAGS= - test -z "$XPM_INCLUDE" && XPM_INCLUDE= - - AC_ARG_WITH(xpm,AC_HELP_STRING([--without-xpm],[disable color pixmap XPM tests]), - xpm_test=$withval, xpm_test="yes") - if test "x$xpm_test" = xno; then - ac_cv_have_xpm=no - else - AC_MSG_CHECKING(for XPM) - AC_CACHE_VAL(ac_cv_have_xpm, - [ - ac_save_ldflags="$LDFLAGS" - ac_save_cflags="$CFLAGS" - if test "x$kde_use_qt_emb" != "xyes" && test "x$kde_use_qt_mac" != "xyes"; then - LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS $LDFLAGS $XPM_LDFLAGS $all_libraries -lXpm -lX11 -lXext $LIBZ $LIBSOCKET" - else - LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS $LDFLAGS $XPM_LDFLAGS $all_libraries -lXpm $LIBZ $LIBSOCKET" - fi - CFLAGS="$CFLAGS $X_INCLUDES $USER_INCLUDES" - test -n "$XPM_INCLUDE" && CFLAGS="-I$XPM_INCLUDE $CFLAGS" - AC_TRY_LINK([#include ],[], - ac_cv_have_xpm="yes",ac_cv_have_xpm="no") - LDFLAGS="$ac_save_ldflags" - CFLAGS="$ac_save_cflags" - ])dnl - - if test "$ac_cv_have_xpm" = no; then - AC_MSG_RESULT(no) - XPM_LDFLAGS="" - XPMINC="" - $2 - else - AC_DEFINE(HAVE_XPM, 1, [Define if you have XPM support]) - if test "$XPM_LDFLAGS" = ""; then - XPMLIB='-lXpm $(LIB_X11)' - else - XPMLIB="-L$XPM_LDFLAGS -lXpm "'$(LIB_X11)' - fi - if test "$XPM_INCLUDE" = ""; then - XPMINC="" - else - XPMINC="-I$XPM_INCLUDE" - fi - AC_MSG_RESULT(yes) - $1 - fi - fi - AC_SUBST(XPMINC) - AC_SUBST(XPMLIB) -]) - -AC_DEFUN([AC_HAVE_DPMS], - [AC_REQUIRE_CPP()dnl - AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) - - test -z "$DPMS_LDFLAGS" && DPMS_LDFLAGS= - test -z "$DPMS_INCLUDE" && DPMS_INCLUDE= - DPMS_LIB= - - AC_ARG_WITH(dpms,AC_HELP_STRING([--without-dpms],[disable DPMS power saving]), - dpms_test=$withval, dpms_test="yes") - if test "x$dpms_test" = xno; then - ac_cv_have_dpms=no - else - AC_MSG_CHECKING(for DPMS) - dnl Note: ac_cv_have_dpms can be no, yes, or -lXdpms. - dnl 'yes' means DPMS_LIB="", '-lXdpms' means DPMS_LIB="-lXdpms". - AC_CACHE_VAL(ac_cv_have_dpms, - [ - if test "x$kde_use_qt_emb" = "xyes" || test "x$kde_use_qt_mac" = "xyes"; then - AC_MSG_RESULT(no) - ac_cv_have_dpms="no" - else - ac_save_ldflags="$LDFLAGS" - ac_save_cflags="$CFLAGS" - ac_save_libs="$LIBS" - LDFLAGS="$LDFLAGS $DPMS_LDFLAGS $all_libraries" - LIBS="-lX11 -lXext $LIBSOCKET" - CFLAGS="$CFLAGS $X_INCLUDES" - test -n "$DPMS_INCLUDE" && CFLAGS="-I$DPMS_INCLUDE $CFLAGS" - AC_TRY_LINK([ - #include - #include - #include - #include - int foo_test_dpms() - { return DPMSSetTimeouts( 0, 0, 0, 0 ); }],[], - ac_cv_have_dpms="yes", [ - LIBS="-lXdpms $LIBS" - AC_TRY_LINK([ - #include - #include - #include - #include - int foo_test_dpms() - { return DPMSSetTimeouts( 0, 0, 0, 0 ); }],[], - [ - ac_cv_have_dpms="-lXdpms" - ],ac_cv_have_dpms="no") - ]) - LDFLAGS="$ac_save_ldflags" - CFLAGS="$ac_save_cflags" - LIBS="$ac_save_libs" - fi - ])dnl - - if test "$ac_cv_have_dpms" = no; then - AC_MSG_RESULT(no) - DPMS_LDFLAGS="" - DPMSINC="" - $2 - else - AC_DEFINE(HAVE_DPMS, 1, [Define if you have DPMS support]) - if test "$ac_cv_have_dpms" = "-lXdpms"; then - DPMS_LIB="-lXdpms" - fi - if test "$DPMS_LDFLAGS" = ""; then - DPMSLIB="$DPMS_LIB "'$(LIB_X11)' - else - DPMSLIB="$DPMS_LDFLAGS $DPMS_LIB "'$(LIB_X11)' - fi - if test "$DPMS_INCLUDE" = ""; then - DPMSINC="" - else - DPMSINC="-I$DPMS_INCLUDE" - fi - AC_MSG_RESULT(yes) - $1 - fi - fi - ac_save_cflags="$CFLAGS" - CFLAGS="$CFLAGS $X_INCLUDES" - test -n "$DPMS_INCLUDE" && CFLAGS="-I$DPMS_INCLUDE $CFLAGS" - AH_TEMPLATE(HAVE_DPMSCAPABLE_PROTO, - [Define if you have the DPMSCapable prototype in ]) - AC_CHECK_DECL(DPMSCapable, - AC_DEFINE(HAVE_DPMSCAPABLE_PROTO),, - [#include - #include ]) - AH_TEMPLATE(HAVE_DPMSINFO_PROTO, - [Define if you have the DPMSInfo prototype in ]) - AC_CHECK_DECL(DPMSInfo, - AC_DEFINE(HAVE_DPMSINFO_PROTO),, - [#include - #include ]) - CFLAGS="$ac_save_cflags" - AC_SUBST(DPMSINC) - AC_SUBST(DPMSLIB) -]) - -AC_DEFUN([AC_HAVE_GL], - [AC_REQUIRE_CPP()dnl - AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) - - test -z "$GL_LDFLAGS" && GL_LDFLAGS= - test -z "$GL_INCLUDE" && GL_INCLUDE= - - AC_ARG_WITH(gl,AC_HELP_STRING([--without-gl],[disable 3D GL modes]), - gl_test=$withval, gl_test="yes") - if test "x$kde_use_qt_emb" = "xyes"; then - # GL and Qt Embedded is a no-go for now. - ac_cv_have_gl=no - elif test "x$gl_test" = xno; then - ac_cv_have_gl=no - else - AC_MSG_CHECKING(for GL) - AC_CACHE_VAL(ac_cv_have_gl, - [ - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - ac_save_ldflags=$LDFLAGS - ac_save_cxxflags=$CXXFLAGS - ac_save_libs=$LIBS - LDFLAGS="$LDFLAGS $GL_LDFLAGS $X_LDFLAGS $all_libraries" - LIBS="$LIBS -lGL -lGLU" - test "x$kde_use_qt_mac" != xyes && test "x$kde_use_qt_emb" != xyes && LIBS="$LIBS -lX11" - LIBS="$LIBS $LIB_XEXT -lm $LIBSOCKET" - CXXFLAGS="$CFLAGS $X_INCLUDES" - test -n "$GL_INCLUDE" && CFLAGS="-I$GL_INCLUDE $CFLAGS" - AC_TRY_LINK([#include -#include -], [], - ac_cv_have_gl="yes", ac_cv_have_gl="no") - AC_LANG_RESTORE - LDFLAGS=$ac_save_ldflags - CXXFLAGS=$ac_save_cxxflags - LIBS=$ac_save_libs - ])dnl - - if test "$ac_cv_have_gl" = "no"; then - AC_MSG_RESULT(no) - GL_LDFLAGS="" - GLINC="" - $2 - else - AC_DEFINE(HAVE_GL, 1, [Defines if you have GL (Mesa, OpenGL, ...)]) - if test "$GL_LDFLAGS" = ""; then - GLLIB='-lGLU -lGL $(LIB_X11)' - else - GLLIB="$GL_LDFLAGS -lGLU -lGL "'$(LIB_X11)' - fi - if test "$GL_INCLUDE" = ""; then - GLINC="" - else - GLINC="-I$GL_INCLUDE" - fi - AC_MSG_RESULT($ac_cv_have_gl) - $1 - fi - fi - AC_SUBST(GLINC) - AC_SUBST(GLLIB) -]) - - - dnl shadow password and PAM magic - maintained by ossi@kde.org - -AC_DEFUN([KDE_PAM], [ - AC_REQUIRE([KDE_CHECK_LIBDL]) - - want_pam= - AC_ARG_WITH(pam, - AC_HELP_STRING([--with-pam[=ARG]],[enable support for PAM: ARG=[yes|no|service name]]), - [ if test "x$withval" = "xyes"; then - want_pam=yes - pam_service=kde - elif test "x$withval" = "xno"; then - want_pam=no - else - want_pam=yes - pam_service=$withval - fi - ], [ pam_service=kde ]) - - use_pam= - PAMLIBS= - if test "x$want_pam" != xno; then - AC_CHECK_LIB(pam, pam_start, [ - AC_CHECK_HEADER(security/pam_appl.h, - [ pam_header=security/pam_appl.h ], - [ AC_CHECK_HEADER(pam/pam_appl.h, - [ pam_header=pam/pam_appl.h ], - [ - AC_MSG_WARN([PAM detected, but no headers found! -Make sure you have the necessary development packages installed.]) - ] - ) - ] - ) - ], , $LIBDL) - if test -z "$pam_header"; then - if test "x$want_pam" = xyes; then - AC_MSG_ERROR([--with-pam was specified, but cannot compile with PAM!]) - fi - else - AC_DEFINE(HAVE_PAM, 1, [Defines if you have PAM (Pluggable Authentication Modules)]) - PAMLIBS="$PAM_MISC_LIB -lpam $LIBDL" - use_pam=yes - - dnl darwin claims to be something special - if test "$pam_header" = "pam/pam_appl.h"; then - AC_DEFINE(HAVE_PAM_PAM_APPL_H, 1, [Define if your PAM headers are in pam/ instead of security/]) - fi - - dnl test whether struct pam_message is const (Linux) or not (Sun) - AC_MSG_CHECKING(for const pam_message) - AC_EGREP_HEADER([struct pam_message], $pam_header, - [ AC_EGREP_HEADER([const struct pam_message], $pam_header, - [AC_MSG_RESULT([const: Linux-type PAM])], - [AC_MSG_RESULT([nonconst: Sun-type PAM]) - AC_DEFINE(PAM_MESSAGE_NONCONST, 1, [Define if your PAM support takes non-const arguments (Solaris)])] - )], - [AC_MSG_RESULT([not found - assume const, Linux-type PAM])]) - fi - fi - - AC_SUBST(PAMLIBS) -]) - -dnl DEF_PAM_SERVICE(arg name, full name, define name) -AC_DEFUN([DEF_PAM_SERVICE], [ - AC_ARG_WITH($1-pam, - AC_HELP_STRING([--with-$1-pam=[val]],[override PAM service from --with-pam for $2]), - [ if test "x$use_pam" = xyes; then - $3_PAM_SERVICE=$withval - else - AC_MSG_ERROR([Cannot use use --with-$1-pam, as no PAM was detected. -You may want to enforce it by using --with-pam.]) - fi - ], - [ if test "x$use_pam" = xyes; then - $3_PAM_SERVICE="$pam_service" - fi - ]) - if test -n "$$3_PAM_SERVICE"; then - AC_MSG_RESULT([The PAM service used by $2 will be $$3_PAM_SERVICE]) - AC_DEFINE_UNQUOTED($3_PAM_SERVICE, "$$3_PAM_SERVICE", [The PAM service to be used by $2]) - fi - AC_SUBST($3_PAM_SERVICE) -]) - -AC_DEFUN([KDE_SHADOWPASSWD], [ - AC_REQUIRE([KDE_PAM]) - - AC_CHECK_LIB(shadow, getspent, - [ LIBSHADOW="-lshadow" - ac_use_shadow=yes - ], - [ dnl for UnixWare - AC_CHECK_LIB(gen, getspent, - [ LIBGEN="-lgen" - ac_use_shadow=yes - ], - [ AC_CHECK_FUNC(getspent, - [ ac_use_shadow=yes ], - [ ac_use_shadow=no ]) - ]) - ]) - AC_SUBST(LIBSHADOW) - AC_SUBST(LIBGEN) - - AC_MSG_CHECKING([for shadow passwords]) - - AC_ARG_WITH(shadow, - AC_HELP_STRING([--with-shadow],[If you want shadow password support]), - [ if test "x$withval" != "xno"; then - use_shadow=yes - else - use_shadow=no - fi - ], [ - use_shadow="$ac_use_shadow" - ]) - - if test "x$use_shadow" = xyes; then - AC_MSG_RESULT(yes) - AC_DEFINE(HAVE_SHADOW, 1, [Define if you use shadow passwords]) - else - AC_MSG_RESULT(no) - LIBSHADOW= - LIBGEN= - fi - - dnl finally make the relevant binaries setuid root, if we have shadow passwds. - dnl this still applies, if we could use it indirectly through pam. - if test "x$use_shadow" = xyes || - ( test "x$use_pam" = xyes && test "x$ac_use_shadow" = xyes ); then - case $host in - *-*-freebsd* | *-*-netbsd* | *-*-openbsd*) - SETUIDFLAGS="-m 4755 -o root";; - *) - SETUIDFLAGS="-m 4755";; - esac - fi - AC_SUBST(SETUIDFLAGS) - -]) - -AC_DEFUN([KDE_PASSWDLIBS], [ - AC_REQUIRE([KDE_MISC_TESTS]) dnl for LIBCRYPT - AC_REQUIRE([KDE_PAM]) - AC_REQUIRE([KDE_SHADOWPASSWD]) - - if test "x$use_pam" = "xyes"; then - PASSWDLIBS="$PAMLIBS" - else - PASSWDLIBS="$LIBCRYPT $LIBSHADOW $LIBGEN" - fi - - dnl FreeBSD uses a shadow-like setup, where /etc/passwd holds the users, but - dnl /etc/master.passwd holds the actual passwords. /etc/master.passwd requires - dnl root to read, so kcheckpass needs to be root (even when using pam, since pam - dnl may need to read /etc/master.passwd). - case $host in - *-*-freebsd*) - SETUIDFLAGS="-m 4755 -o root" - ;; - *) - ;; - esac - - AC_SUBST(PASSWDLIBS) -]) - -AC_DEFUN([KDE_CHECK_LIBDL], -[ -AC_CHECK_LIB(dl, dlopen, [ -LIBDL="-ldl" -ac_cv_have_dlfcn=yes -]) - -AC_CHECK_LIB(dld, shl_unload, [ -LIBDL="-ldld" -ac_cv_have_shload=yes -]) - -AC_SUBST(LIBDL) -]) - -AC_DEFUN([KDE_CHECK_DLOPEN], -[ -KDE_CHECK_LIBDL -AC_CHECK_HEADERS(dlfcn.h dl.h) -if test "$ac_cv_header_dlfcn_h" = "no"; then - ac_cv_have_dlfcn=no -fi - -if test "$ac_cv_header_dl_h" = "no"; then - ac_cv_have_shload=no -fi - -dnl XXX why change enable_dlopen? its already set by autoconf's AC_ARG_ENABLE -dnl (MM) -AC_ARG_ENABLE(dlopen, -AC_HELP_STRING([--disable-dlopen],[link statically [default=no]]), -enable_dlopen=$enableval, -enable_dlopen=yes) - -# override the user's opinion, if we know it better ;) -if test "$ac_cv_have_dlfcn" = "no" && test "$ac_cv_have_shload" = "no"; then - enable_dlopen=no -fi - -if test "$ac_cv_have_dlfcn" = "yes"; then - AC_DEFINE_UNQUOTED(HAVE_DLFCN, 1, [Define if you have dlfcn]) -fi - -if test "$ac_cv_have_shload" = "yes"; then - AC_DEFINE_UNQUOTED(HAVE_SHLOAD, 1, [Define if you have shload]) -fi - -if test "$enable_dlopen" = no ; then - test -n "$1" && eval $1 -else - test -n "$2" && eval $2 -fi - -]) - -AC_DEFUN([KDE_CHECK_DYNAMIC_LOADING], -[ -KDE_CHECK_DLOPEN(libtool_enable_shared=yes, libtool_enable_static=no) -KDE_PROG_LIBTOOL -AC_MSG_CHECKING([dynamic loading]) -eval "`egrep '^build_libtool_libs=' libtool`" -if test "$build_libtool_libs" = "yes" && test "$enable_dlopen" = "yes"; then - dynamic_loading=yes - AC_DEFINE_UNQUOTED(HAVE_DYNAMIC_LOADING) -else - dynamic_loading=no -fi -AC_MSG_RESULT($dynamic_loading) -if test "$dynamic_loading" = "yes"; then - $1 -else - $2 -fi -]) - -AC_DEFUN([KDE_ADD_INCLUDES], -[ -if test -z "$1"; then - test_include="Pix.h" -else - test_include="$1" -fi - -AC_MSG_CHECKING([for libg++ ($test_include)]) - -AC_CACHE_VAL(kde_cv_libgpp_includes, -[ -kde_cv_libgpp_includes=no - - for ac_dir in \ - \ - /usr/include/g++ \ - /usr/include \ - /usr/unsupported/include \ - /opt/include \ - $extra_include \ - ; \ - do - if test -r "$ac_dir/$test_include"; then - kde_cv_libgpp_includes=$ac_dir - break - fi - done -]) - -AC_MSG_RESULT($kde_cv_libgpp_includes) -if test "$kde_cv_libgpp_includes" != "no"; then - all_includes="-I$kde_cv_libgpp_includes $all_includes $USER_INCLUDES" -fi -]) -]) - -AC_DEFUN([KDE_CHECK_LIBPTHREAD], -[ - dnl This code is here specifically to handle the - dnl various flavors of threading library on FreeBSD - dnl 4-, 5-, and 6-, and the (weird) rules around it. - dnl There may be an environment PTHREAD_LIBS that - dnl specifies what to use; otherwise, search for it. - dnl -pthread is special cased and unsets LIBPTHREAD - dnl below if found. - LIBPTHREAD="" - - if test -n "$PTHREAD_LIBS"; then - if test "x$PTHREAD_LIBS" = "x-pthread" ; then - LIBPTHREAD="PTHREAD" - else - PTHREAD_LIBS_save="$PTHREAD_LIBS" - PTHREAD_LIBS=`echo "$PTHREAD_LIBS_save" | sed -e 's,^-l,,g'` - AC_MSG_CHECKING([for pthread_create in $PTHREAD_LIBS]) - KDE_CHECK_LIB($PTHREAD_LIBS, pthread_create, [ - LIBPTHREAD="$PTHREAD_LIBS_save"]) - PTHREAD_LIBS="$PTHREAD_LIBS_save" - fi - fi - - dnl Is this test really needed, in the face of the Tru64 test below? - if test -z "$LIBPTHREAD"; then - AC_CHECK_LIB(pthread, pthread_create, [LIBPTHREAD="-lpthread"]) - fi - - dnl This is a special Tru64 check, see BR 76171 issue #18. - if test -z "$LIBPTHREAD" ; then - AC_MSG_CHECKING([for pthread_create in -lpthread]) - kde_safe_libs=$LIBS - LIBS="$LIBS -lpthread" - AC_TRY_LINK([#include ],[(void)pthread_create(0,0,0,0);],[ - AC_MSG_RESULT(yes) - LIBPTHREAD="-lpthread"],[ - AC_MSG_RESULT(no)]) - LIBS=$kde_safe_libs - fi - - dnl Un-special-case for FreeBSD. - if test "x$LIBPTHREAD" = "xPTHREAD" ; then - LIBPTHREAD="" - fi - - AC_SUBST(LIBPTHREAD) -]) - -AC_DEFUN([KDE_CHECK_PTHREAD_OPTION], -[ - USE_THREADS="" - if test -z "$LIBPTHREAD"; then - KDE_CHECK_COMPILER_FLAG(pthread, [USE_THREADS="-D_THREAD_SAFE -pthread"]) - fi - - AH_VERBATIM(__svr_define, [ -#if defined(__SVR4) && !defined(__svr4__) -#define __svr4__ 1 -#endif -]) - case $host_os in - solaris*) - KDE_CHECK_COMPILER_FLAG(mt, [USE_THREADS="-mt"]) - CPPFLAGS="$CPPFLAGS -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DUSE_SOLARIS -DSVR4" - ;; - freebsd*) - CPPFLAGS="$CPPFLAGS -D_THREAD_SAFE $PTHREAD_CFLAGS" - ;; - aix*) - CPPFLAGS="$CPPFLAGS -D_THREAD_SAFE" - LIBPTHREAD="$LIBPTHREAD -lc_r" - ;; - linux*) CPPFLAGS="$CPPFLAGS -D_REENTRANT" - if test "$CXX" = "KCC"; then - CXXFLAGS="$CXXFLAGS --thread_safe" - NOOPT_CXXFLAGS="$NOOPT_CXXFLAGS --thread_safe" - fi - ;; - *) - ;; - esac - AC_SUBST(USE_THREADS) - AC_SUBST(LIBPTHREAD) -]) - -AC_DEFUN([KDE_CHECK_THREADING], -[ - AC_REQUIRE([KDE_CHECK_LIBPTHREAD]) - AC_REQUIRE([KDE_CHECK_PTHREAD_OPTION]) - dnl default is yes if libpthread is found and no if no libpthread is available - if test -z "$LIBPTHREAD"; then - if test -z "$USE_THREADS"; then - kde_check_threading_default=no - else - kde_check_threading_default=yes - fi - else - kde_check_threading_default=yes - fi - AC_ARG_ENABLE(threading,AC_HELP_STRING([--disable-threading],[disables threading even if libpthread found]), - kde_use_threading=$enableval, kde_use_threading=$kde_check_threading_default) - if test "x$kde_use_threading" = "xyes"; then - AC_DEFINE(HAVE_LIBPTHREAD, 1, [Define if you have a working libpthread (will enable threaded code)]) - fi -]) - -AC_DEFUN([KDE_TRY_LINK_PYTHON], -[ -if test "$kde_python_link_found" = no; then - -if test "$1" = normal; then - AC_MSG_CHECKING(if a Python application links) -else - AC_MSG_CHECKING(if Python depends on $2) -fi - -AC_CACHE_VAL(kde_cv_try_link_python_$1, -[ -kde_save_cflags="$CFLAGS" -CFLAGS="$CFLAGS $PYTHONINC" -kde_save_libs="$LIBS" -LIBS="$LIBS $LIBPYTHON $2 $LIBDL $LIBSOCKET" -kde_save_ldflags="$LDFLAGS" -LDFLAGS="$LDFLAGS $PYTHONLIB" - -AC_TRY_LINK( -[ -#include -],[ - PySys_SetArgv(1, 0); -], - [kde_cv_try_link_python_$1=yes], - [kde_cv_try_link_python_$1=no] -) -CFLAGS="$kde_save_cflags" -LIBS="$kde_save_libs" -LDFLAGS="$kde_save_ldflags" -]) - -if test "$kde_cv_try_link_python_$1" = "yes"; then - AC_MSG_RESULT(yes) - kde_python_link_found=yes - if test ! "$1" = normal; then - LIBPYTHON="$LIBPYTHON $2" - fi - $3 -else - AC_MSG_RESULT(no) - $4 -fi - -fi - -]) - -AC_DEFUN([KDE_CHECK_PYTHON_DIR], -[ -AC_MSG_CHECKING([for Python directory]) - -AC_CACHE_VAL(kde_cv_pythondir, -[ - if test -z "$PYTHONDIR"; then - kde_cv_pythondir=/usr/local - else - kde_cv_pythondir="$PYTHONDIR" - fi -]) - -AC_ARG_WITH(pythondir, -AC_HELP_STRING([--with-pythondir=pythondir],[use python installed in pythondir]), -[ - ac_python_dir=$withval -], ac_python_dir=$kde_cv_pythondir -) - -AC_MSG_RESULT($ac_python_dir) -]) - -AC_DEFUN([KDE_CHECK_PYTHON_INTERN], -[ -AC_REQUIRE([KDE_CHECK_LIBDL]) -AC_REQUIRE([KDE_CHECK_LIBPTHREAD]) -AC_REQUIRE([KDE_CHECK_PYTHON_DIR]) - -if test -z "$1"; then - version="1.5" -else - version="$1" -fi - -AC_MSG_CHECKING([for Python$version]) - -python_incdirs="$ac_python_dir/include /usr/include /usr/local/include/ $kde_extra_includes" -AC_FIND_FILE(Python.h, $python_incdirs, python_incdir) -if test ! -r $python_incdir/Python.h; then - AC_FIND_FILE(python$version/Python.h, $python_incdirs, python_incdir) - python_incdir=$python_incdir/python$version - if test ! -r $python_incdir/Python.h; then - python_incdir=no - fi -fi - -PYTHONINC=-I$python_incdir - -python_libdirs="$ac_python_dir/lib$tdelibsuff /usr/lib$tdelibsuff /usr/local /usr/lib$tdelibsuff $kde_extra_libs" -AC_FIND_FILE(libpython$version.so, $python_libdirs, python_libdir) -if test ! -r $python_libdir/libpython$version.so; then - AC_FIND_FILE(libpython$version.a, $python_libdirs, python_libdir) - if test ! -r $python_libdir/libpython$version.a; then - AC_FIND_FILE(python$version/config/libpython$version.a, $python_libdirs, python_libdir) - python_libdir=$python_libdir/python$version/config - if test ! -r $python_libdir/libpython$version.a; then - python_libdir=no - fi - fi -fi - -PYTHONLIB=-L$python_libdir -kde_orig_LIBPYTHON=$LIBPYTHON -if test -z "$LIBPYTHON"; then - LIBPYTHON=-lpython$version -fi - -AC_FIND_FILE(python$version/copy.py, $python_libdirs, python_moddir) -python_moddir=$python_moddir/python$version -if test ! -r $python_moddir/copy.py; then - python_moddir=no -fi - -PYTHONMODDIR=$python_moddir - -AC_MSG_RESULT(header $python_incdir library $python_libdir modules $python_moddir) - -if test x$python_incdir = xno || test x$python_libdir = xno || test x$python_moddir = xno; then - LIBPYTHON=$kde_orig_LIBPYTHON - test "x$PYTHONLIB" = "x-Lno" && PYTHONLIB="" - test "x$PYTHONINC" = "x-Ino" && PYTHONINC="" - $2 -else - dnl Note: this test is very weak - kde_python_link_found=no - KDE_TRY_LINK_PYTHON(normal) - KDE_TRY_LINK_PYTHON(m, -lm) - KDE_TRY_LINK_PYTHON(pthread, $LIBPTHREAD) - KDE_TRY_LINK_PYTHON(tcl, -ltcl) - KDE_TRY_LINK_PYTHON(db2, -ldb2) - KDE_TRY_LINK_PYTHON(m_and_thread, [$LIBPTHREAD -lm]) - KDE_TRY_LINK_PYTHON(m_and_thread_and_util, [$LIBPTHREAD -lm -lutil]) - KDE_TRY_LINK_PYTHON(m_and_thread_and_db3, [$LIBPTHREAD -lm -ldb-3 -lutil]) - KDE_TRY_LINK_PYTHON(pthread_and_db3, [$LIBPTHREAD -ldb-3]) - KDE_TRY_LINK_PYTHON(m_and_thread_and_db, [$LIBPTHREAD -lm -ldb -ltermcap -lutil]) - KDE_TRY_LINK_PYTHON(pthread_and_dl, [$LIBPTHREAD $LIBDL -lutil -lreadline -lncurses -lm]) - KDE_TRY_LINK_PYTHON(pthread_and_panel_curses, [$LIBPTHREAD $LIBDL -lm -lpanel -lcurses]) - KDE_TRY_LINK_PYTHON(m_and_thread_and_db_special, [$LIBPTHREAD -lm -ldb -lutil], [], - [AC_MSG_WARN([it seems, Python depends on another library. - Please set LIBPYTHON to '-lpython$version -lotherlib' before calling configure to fix this - and contact the authors to let them know about this problem]) - ]) - - LIBPYTHON="$LIBPYTHON $LIBDL $LIBSOCKET" - AC_SUBST(PYTHONINC) - AC_SUBST(PYTHONLIB) - AC_SUBST(LIBPYTHON) - AC_SUBST(PYTHONMODDIR) - AC_DEFINE(HAVE_PYTHON, 1, [Define if you have the development files for python]) -fi - -]) - - -AC_DEFUN([KDE_CHECK_PYTHON], -[ - KDE_CHECK_PYTHON_INTERN("2.5", - [KDE_CHECK_PYTHON_INTERN("2.4", - [KDE_CHECK_PYTHON_INTERN("2.3", - [KDE_CHECK_PYTHON_INTERN("2.2", - [KDE_CHECK_PYTHON_INTERN("2.1", - [KDE_CHECK_PYTHON_INTERN("2.0", - [KDE_CHECK_PYTHON_INTERN($1, $2) ]) - ]) - ]) - ]) - ]) - ]) -]) - -AC_DEFUN([KDE_CHECK_STL], -[ - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - ac_save_CXXFLAGS="$CXXFLAGS" - CXXFLAGS="`echo $CXXFLAGS | sed s/-fno-exceptions//`" - - AC_MSG_CHECKING([if C++ programs can be compiled]) - AC_CACHE_VAL(kde_cv_stl_works, - [ - AC_TRY_COMPILE([ -#include -using namespace std; -],[ - string astring="Hallo Welt."; - astring.erase(0, 6); // now astring is "Welt" - return 0; -], kde_cv_stl_works=yes, - kde_cv_stl_works=no) -]) - - AC_MSG_RESULT($kde_cv_stl_works) - - if test "$kde_cv_stl_works" = "yes"; then - # back compatible - AC_DEFINE_UNQUOTED(HAVE_SGI_STL, 1, [Define if you have a STL implementation by SGI]) - else - AC_MSG_ERROR([Your Installation isn't able to compile simple C++ programs. -Check config.log for details - if you're using a Linux distribution you might miss -a package named similar to libstdc++-dev.]) - fi - - CXXFLAGS="$ac_save_CXXFLAGS" - AC_LANG_RESTORE -]) - -AC_DEFUN([AC_FIND_QIMGIO], - [AC_REQUIRE([AC_FIND_JPEG]) -AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) -AC_MSG_CHECKING([for qimgio]) -AC_CACHE_VAL(ac_cv_lib_qimgio, -[ -AC_LANG_SAVE -AC_LANG_CPLUSPLUS -ac_save_LIBS="$LIBS" -ac_save_CXXFLAGS="$CXXFLAGS" -LIBS="$all_libraries -lqimgio -lpng -lz $LIBJPEG $LIBTQT" -CXXFLAGS="$CXXFLAGS -I$qt_incdir $all_includes" -AC_TRY_RUN(dnl -[ -#include -#include -int main() { - QString t = "hallo"; - t.fill('t'); - qInitImageIO(); -} -], - ac_cv_lib_qimgio=yes, - ac_cv_lib_qimgio=no, - ac_cv_lib_qimgio=no) -LIBS="$ac_save_LIBS" -CXXFLAGS="$ac_save_CXXFLAGS" -AC_LANG_RESTORE -])dnl -if eval "test \"`echo $ac_cv_lib_qimgio`\" = yes"; then - LIBQIMGIO="-lqimgio -lpng -lz $LIBJPEG" - AC_MSG_RESULT(yes) - AC_DEFINE_UNQUOTED(HAVE_QIMGIO, 1, [Define if you have the Qt extension qimgio available]) - AC_SUBST(LIBQIMGIO) -else - AC_MSG_RESULT(not found) -fi -]) - -AC_DEFUN([AM_DISABLE_LIBRARIES], -[ - AC_PROVIDE([AM_ENABLE_STATIC]) - AC_PROVIDE([AM_ENABLE_SHARED]) - enable_static=no - enable_shared=yes -]) - - -AC_DEFUN([AC_CHECK_UTMP_FILE], -[ - AC_MSG_CHECKING([for utmp file]) - - AC_CACHE_VAL(kde_cv_utmp_file, - [ - kde_cv_utmp_file=no - - for ac_file in \ - \ - /var/run/utmp \ - /var/adm/utmp \ - /etc/utmp \ - ; \ - do - if test -r "$ac_file"; then - kde_cv_utmp_file=$ac_file - break - fi - done - ]) - - if test "$kde_cv_utmp_file" != "no"; then - AC_DEFINE_UNQUOTED(UTMP, "$kde_cv_utmp_file", [Define the file for utmp entries]) - $1 - AC_MSG_RESULT($kde_cv_utmp_file) - else - $2 - AC_MSG_RESULT([non found]) - fi -]) - - -AC_DEFUN([KDE_CREATE_SUBDIRSLIST], -[ - -DO_NOT_COMPILE="$DO_NOT_COMPILE CVS debian bsd-port admin" -TOPSUBDIRS="" - -if test ! -s $srcdir/subdirs; then - dnl Note: Makefile.common creates subdirs, so this is just a fallback - files=`cd $srcdir && ls -1` - dirs=`for i in $files; do if test -d $i; then echo $i; fi; done` - for i in $dirs; do - echo $i >> $srcdir/subdirs - done -fi - -ac_topsubdirs= -if test -s $srcdir/inst-apps; then - ac_topsubdirs="`cat $srcdir/inst-apps`" -elif test -s $srcdir/subdirs; then - ac_topsubdirs="`cat $srcdir/subdirs`" -fi - -for i in $ac_topsubdirs; do - AC_MSG_CHECKING([if $i should be compiled]) - if test -d $srcdir/$i; then - install_it="yes" - for j in $DO_NOT_COMPILE; do - if test $i = $j; then - install_it="no" - fi - done - else - install_it="no" - fi - AC_MSG_RESULT($install_it) - vari=`echo $i | sed -e 's,[[-+.@]],_,g'` - if test $install_it = "yes"; then - TOPSUBDIRS="$TOPSUBDIRS $i" - eval "$vari""_SUBDIR_included=yes" - else - eval "$vari""_SUBDIR_included=no" - fi -done - -AC_SUBST(TOPSUBDIRS) -]) - -AC_DEFUN([KDE_CHECK_NAMESPACES], -[ -AC_MSG_CHECKING(whether C++ compiler supports namespaces) -AC_LANG_SAVE -AC_LANG_CPLUSPLUS -AC_TRY_COMPILE([ -], -[ -namespace Foo { - extern int i; - namespace Bar { - extern int i; - } -} - -int Foo::i = 0; -int Foo::Bar::i = 1; -],[ - AC_MSG_RESULT(yes) - AC_DEFINE(HAVE_NAMESPACES) -], [ -AC_MSG_RESULT(no) -]) -AC_LANG_RESTORE -]) - -dnl ------------------------------------------------------------------------ -dnl Check for S_ISSOCK macro. Doesn't exist on Unix SCO. faure@kde.org -dnl ------------------------------------------------------------------------ -dnl -AC_DEFUN([AC_CHECK_S_ISSOCK], -[ -AC_MSG_CHECKING(for S_ISSOCK) -AC_CACHE_VAL(ac_cv_have_s_issock, -[ -AC_TRY_LINK( -[ -#include -], -[ -struct stat buff; -int b = S_ISSOCK( buff.st_mode ); -], -ac_cv_have_s_issock=yes, -ac_cv_have_s_issock=no) -]) -AC_MSG_RESULT($ac_cv_have_s_issock) -if test "$ac_cv_have_s_issock" = "yes"; then - AC_DEFINE_UNQUOTED(HAVE_S_ISSOCK, 1, [Define if sys/stat.h declares S_ISSOCK.]) -fi - -AH_VERBATIM(_ISSOCK, -[ -#ifndef HAVE_S_ISSOCK -#define HAVE_S_ISSOCK -#define S_ISSOCK(mode) (1==0) -#endif -]) - -]) - -dnl ------------------------------------------------------------------------ -dnl Check for MAXPATHLEN macro, defines KDEMAXPATHLEN. faure@kde.org -dnl ------------------------------------------------------------------------ -dnl -AC_DEFUN([AC_CHECK_KDEMAXPATHLEN], -[ -AC_MSG_CHECKING(for MAXPATHLEN) -AC_CACHE_VAL(ac_cv_maxpathlen, -[ -cat > conftest.$ac_ext < -#endif -#include -#include -#ifndef MAXPATHLEN -#define MAXPATHLEN 1024 -#endif - -KDE_HELLO MAXPATHLEN - -EOF - -ac_try="$ac_cpp conftest.$ac_ext 2>/dev/null | grep '^KDE_HELLO' >conftest.out" - -if AC_TRY_EVAL(ac_try) && test -s conftest.out; then - ac_cv_maxpathlen=`sed 's#KDE_HELLO ##' conftest.out` -else - ac_cv_maxpathlen=1024 -fi - -rm conftest.* - -]) -AC_MSG_RESULT($ac_cv_maxpathlen) -AC_DEFINE_UNQUOTED(KDEMAXPATHLEN,$ac_cv_maxpathlen, [Define a safe value for MAXPATHLEN] ) -]) - -AC_DEFUN([KDE_CHECK_HEADER], -[ - kde_safe_cppflags=$CPPFLAGS - CPPFLAGS="$CPPFLAGS $all_includes" - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - AC_CHECK_HEADER([$1], [$2], [$3], [$4]) - AC_LANG_RESTORE - CPPFLAGS=$kde_safe_cppflags -]) - -AC_DEFUN([KDE_CHECK_HEADERS], -[ - AH_CHECK_HEADERS([$1]) - AC_LANG_SAVE - kde_safe_cppflags=$CPPFLAGS - CPPFLAGS="$CPPFLAGS $all_includes" - AC_LANG_CPLUSPLUS - AC_CHECK_HEADERS([$1], [$2], [$3], [$4]) - CPPFLAGS=$kde_safe_cppflags - AC_LANG_RESTORE -]) - -AC_DEFUN([KDE_FAST_CONFIGURE], -[ - dnl makes configure fast (needs perl) - AC_ARG_ENABLE(fast-perl, AC_HELP_STRING([--disable-fast-perl],[disable fast Makefile generation (needs perl)]), - with_fast_perl=$enableval, with_fast_perl=yes) -]) - -AC_DEFUN([KDE_CONF_FILES], -[ - val= - if test -f $srcdir/configure.files ; then - val=`sed -e 's%^%\$(top_srcdir)/%' $srcdir/configure.files` - fi - CONF_FILES= - if test -n "$val" ; then - for i in $val ; do - CONF_FILES="$CONF_FILES $i" - done - fi - AC_SUBST(CONF_FILES) -])dnl - -dnl This sets the prefix, for arts and tdelibs -dnl Do NOT use in any other module. -dnl It only looks at --prefix, TDEDIR and falls back to /usr/local/kde -AC_DEFUN([KDE_SET_PREFIX_CORE], -[ - unset CDPATH - dnl make $TDEDIR the default for the installation - AC_PREFIX_DEFAULT(${TDEDIR:-/usr/local/kde}) - - if test "x$prefix" = "xNONE"; then - prefix=$ac_default_prefix - ac_configure_args="$ac_configure_args --prefix=$prefix" - fi - # And delete superfluous '/' to make compares easier - prefix=`echo "$prefix" | sed 's,//*,/,g' | sed -e 's,/$,,'` - exec_prefix=`echo "$exec_prefix" | sed 's,//*,/,g' | sed -e 's,/$,,'` - - kde_libs_prefix='$(prefix)' - kde_libs_htmldir='$(kde_htmldir)' - AC_SUBST(kde_libs_prefix) - AC_SUBST(kde_libs_htmldir) - KDE_FAST_CONFIGURE - KDE_CONF_FILES -]) - - -AC_DEFUN([KDE_SET_PREFIX], -[ - unset CDPATH - dnl We can't give real code to that macro, only a value. - dnl It only matters for --help, since we set the prefix in this function anyway. - AC_PREFIX_DEFAULT(${TDEDIR:-the kde prefix}) - - KDE_SET_DEFAULT_BINDIRS - if test "x$prefix" = "xNONE"; then - dnl no prefix given: look for tde-config in the PATH and deduce the prefix from it - KDE_FIND_PATH(tde-config, KDECONFIG, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(tde-config)], [], prepend) - else - dnl prefix given: look for tde-config, preferrably in prefix, otherwise in PATH - kde_save_PATH="$PATH" - PATH="$exec_prefix/bin:$prefix/bin:$PATH" - KDE_FIND_PATH(tde-config, KDECONFIG, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(tde-config)], [], prepend) - PATH="$kde_save_PATH" - fi - - kde_libs_prefix=`$KDECONFIG --prefix` - if test -z "$kde_libs_prefix" || test ! -x "$kde_libs_prefix"; then - AC_MSG_ERROR([$KDECONFIG --prefix outputed the non existant prefix '$kde_libs_prefix' for tdelibs. - This means it has been moved since you installed it. - This won't work. Please recompile tdelibs for the new prefix. - ]) - fi - kde_libs_htmldir=`$KDECONFIG --install html --expandvars` - - AC_MSG_CHECKING([where to install]) - if test "x$prefix" = "xNONE"; then - prefix=$kde_libs_prefix - AC_MSG_RESULT([$prefix (as returned by tde-config)]) - else - dnl --prefix was given. Compare prefixes and warn (in configure.in.bot.end) if different - given_prefix=$prefix - AC_MSG_RESULT([$prefix (as requested)]) - fi - - # And delete superfluous '/' to make compares easier - prefix=`echo "$prefix" | sed 's,//*,/,g' | sed -e 's,/$,,'` - exec_prefix=`echo "$exec_prefix" | sed 's,//*,/,g' | sed -e 's,/$,,'` - given_prefix=`echo "$given_prefix" | sed 's,//*,/,g' | sed -e 's,/$,,'` - - AC_SUBST(KDECONFIG) - AC_SUBST(kde_libs_prefix) - AC_SUBST(kde_libs_htmldir) - - KDE_FAST_CONFIGURE - KDE_CONF_FILES -]) - -pushdef([AC_PROG_INSTALL], -[ - dnl our own version, testing for a -p flag - popdef([AC_PROG_INSTALL]) - dnl as AC_PROG_INSTALL works as it works we first have - dnl to save if the user didn't specify INSTALL, as the - dnl autoconf one overwrites INSTALL and we have no chance to find - dnl out afterwards - test -n "$INSTALL" && kde_save_INSTALL_given=$INSTALL - test -n "$INSTALL_PROGRAM" && kde_save_INSTALL_PROGRAM_given=$INSTALL_PROGRAM - test -n "$INSTALL_SCRIPT" && kde_save_INSTALL_SCRIPT_given=$INSTALL_SCRIPT - AC_PROG_INSTALL - - if test -z "$kde_save_INSTALL_given" ; then - # OK, user hasn't given any INSTALL, autoconf found one for us - # now we test, if it supports the -p flag - AC_MSG_CHECKING(for -p flag to install) - rm -f confinst.$$.* > /dev/null 2>&1 - echo "Testtest" > confinst.$$.orig - ac_res=no - if ${INSTALL} -p confinst.$$.orig confinst.$$.new > /dev/null 2>&1 ; then - if test -f confinst.$$.new ; then - # OK, -p seems to do no harm to install - INSTALL="${INSTALL} -p" - ac_res=yes - fi - fi - rm -f confinst.$$.* - AC_MSG_RESULT($ac_res) - fi - dnl the following tries to resolve some signs and wonders coming up - dnl with different autoconf/automake versions - dnl e.g.: - dnl *automake 1.4 install-strip sets A_M_INSTALL_PROGRAM_FLAGS to -s - dnl and has INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(A_M_INSTALL_PROGRAM_FLAGS) - dnl it header-vars.am, so there the actual INSTALL_PROGRAM gets the -s - dnl *automake 1.4a (and above) use INSTALL_STRIP_FLAG and only has - dnl INSTALL_PROGRAM = @INSTALL_PROGRAM@ there, but changes the - dnl install-@DIR@PROGRAMS targets to explicitly use that flag - dnl *autoconf 2.13 is dumb, and thinks it can use INSTALL_PROGRAM as - dnl INSTALL_SCRIPT, which breaks with automake <= 1.4 - dnl *autoconf >2.13 (since 10.Apr 1999) has not that failure - dnl *sometimes KDE does not use the install-@DIR@PROGRAM targets from - dnl automake (due to broken Makefile.am or whatever) to install programs, - dnl and so does not see the -s flag in automake > 1.4 - dnl to clean up that mess we: - dnl +set INSTALL_PROGRAM to use INSTALL_STRIP_FLAG - dnl which cleans KDE's program with automake > 1.4; - dnl +set INSTALL_SCRIPT to only use INSTALL, to clean up autoconf's problems - dnl with automake<=1.4 - dnl note that dues to this sometimes two '-s' flags are used (if KDE - dnl properly uses install-@DIR@PROGRAMS, but I don't care - dnl - dnl And to all this comes, that I even can't write in comments variable - dnl names used by automake, because it is so stupid to think I wanted to - dnl _use_ them, therefor I have written A_M_... instead of AM_ - dnl hmm, I wanted to say something ... ahh yes: Arghhh. - - if test -z "$kde_save_INSTALL_PROGRAM_given" ; then - INSTALL_PROGRAM='${INSTALL} $(INSTALL_STRIP_FLAG)' - fi - if test -z "$kde_save_INSTALL_SCRIPT_given" ; then - INSTALL_SCRIPT='${INSTALL}' - fi -])dnl - -AC_DEFUN([KDE_LANG_CPLUSPLUS], -[AC_LANG_CPLUSPLUS -ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&AC_FD_CC' -pushdef([AC_LANG_CPLUSPLUS], [popdef([AC_LANG_CPLUSPLUS]) KDE_LANG_CPLUSPLUS]) -]) - -pushdef([AC_LANG_CPLUSPLUS], -[popdef([AC_LANG_CPLUSPLUS]) -KDE_LANG_CPLUSPLUS -]) - -AC_DEFUN([KDE_CHECK_LONG_LONG], -[ -AC_MSG_CHECKING(for long long) -AC_CACHE_VAL(kde_cv_c_long_long, -[ - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - AC_TRY_LINK([], [ - long long foo = 0; - foo = foo+1; - ], - kde_cv_c_long_long=yes, kde_cv_c_long_long=no) - AC_LANG_RESTORE -]) -AC_MSG_RESULT($kde_cv_c_long_long) -if test "$kde_cv_c_long_long" = yes; then - AC_DEFINE(HAVE_LONG_LONG, 1, [Define if you have long long as datatype]) -fi -]) - -AC_DEFUN([KDE_CHECK_LIB], -[ - kde_save_LDFLAGS="$LDFLAGS" - dnl AC_CHECK_LIB modifies LIBS, so save it here - kde_save_LIBS="$LIBS" - LDFLAGS="$LDFLAGS $all_libraries" - case $host_os in - aix*) LDFLAGS="-brtl $LDFLAGS" - test "$GCC" = yes && LDFLAGS="-Wl,$LDFLAGS" - ;; - esac - AC_CHECK_LIB($1, $2, $3, $4, $5) - LDFLAGS="$kde_save_LDFLAGS" - LIBS="$kde_save_LIBS" -]) - -AC_DEFUN([KDE_JAVA_PREFIX], -[ - dir=`dirname "$1"` - base=`basename "$1"` - list=`ls -1 $dir 2> /dev/null` - for entry in $list; do - if test -d $dir/$entry/bin; then - case $entry in - $base) - javadirs="$javadirs $dir/$entry/bin" - ;; - esac - elif test -d $dir/$entry/jre/bin; then - case $entry in - $base) - javadirs="$javadirs $dir/$entry/jre/bin" - ;; - esac - fi - done -]) - -dnl KDE_CHEC_JAVA_DIR(onlyjre) -AC_DEFUN([KDE_CHECK_JAVA_DIR], -[ - -AC_ARG_WITH(java, -AC_HELP_STRING([--with-java=javadir],[use java installed in javadir, --without-java disables]), -[ ac_java_dir=$withval -], ac_java_dir="" -) - -AC_MSG_CHECKING([for Java]) - -dnl at this point ac_java_dir is either a dir, 'no' to disable, or '' to say look in $PATH -if test "x$ac_java_dir" = "xno"; then - kde_java_bindir=no - kde_java_includedir=no - kde_java_libjvmdir=no - kde_java_libgcjdir=no - kde_java_libhpidir=no -else - if test "x$ac_java_dir" = "x"; then - - - dnl No option set -> collect list of candidate paths - if test -n "$JAVA_HOME"; then - KDE_JAVA_PREFIX($JAVA_HOME) - fi - KDE_JAVA_PREFIX(/usr/j2se) - KDE_JAVA_PREFIX(/usr/lib/j2se) - KDE_JAVA_PREFIX(/usr/j*dk*) - KDE_JAVA_PREFIX(/usr/lib/j*dk*) - KDE_JAVA_PREFIX(/opt/j*sdk*) - KDE_JAVA_PREFIX(/usr/lib/java*) - KDE_JAVA_PREFIX(/usr/java*) - KDE_JAVA_PREFIX(/usr/java/j*dk*) - KDE_JAVA_PREFIX(/usr/java/j*re*) - KDE_JAVA_PREFIX(/usr/lib/SunJava2*) - KDE_JAVA_PREFIX(/usr/lib/SunJava*) - KDE_JAVA_PREFIX(/usr/lib/IBMJava2*) - KDE_JAVA_PREFIX(/usr/lib/IBMJava*) - KDE_JAVA_PREFIX(/opt/java*) - - kde_cv_path="NONE" - kde_save_IFS=$IFS - IFS=':' - for dir in $PATH; do - if test -d "$dir"; then - javadirs="$javadirs $dir" - fi - done - IFS=$kde_save_IFS - jredirs= - - dnl Now javadirs contains a list of paths that exist, all ending with bin/ - for dir in $javadirs; do - dnl Check for the java executable - if test -x "$dir/java"; then - sane_path=$(cd $dir; /bin/pwd) - dnl And also check for a libjvm.so somewhere under there - dnl Since we have to go to the parent dir, /usr/bin is excluded, /usr is too big. - if test "$sane_path" != "/usr/bin"; then - libjvmdir=`find $dir/.. -name libjvm.so | sed 's,libjvm.so,,'|head -n 1` - if test ! -f $libjvmdir/libjvm.so; then continue; fi - jredirs="$jredirs $dir" - fi - fi - done - - dnl Now jredirs contains a reduced list, of paths where both java and ../**/libjvm.so was found - JAVAC= - JAVA= - kde_java_bindir=no - for dir in $jredirs; do - JAVA="$dir/java" - kde_java_bindir=$dir - if test -x "$dir/javac"; then - JAVAC="$dir/javac" - break - fi - done - - if test -n "$JAVAC"; then - dnl this substitution might not work - well, we test for jni.h below - kde_java_includedir=`echo $JAVAC | sed -e 's,bin/javac$,include/,'` - else - kde_java_includedir=no - fi - else - dnl config option set - kde_java_bindir=$ac_java_dir/bin - if test -x $ac_java_dir/bin/java && test ! -x $ac_java_dir/bin/javac; then - kde_java_includedir=no - else - kde_java_includedir=$ac_java_dir/include - fi - fi -fi - -dnl At this point kde_java_bindir and kde_java_includedir are either set or "no" -if test "x$kde_java_bindir" != "xno"; then - - dnl Look for libjvm.so - kde_java_libjvmdir=`find $kde_java_bindir/.. -name libjvm.so | sed 's,libjvm.so,,'|head -n 1` - dnl Look for libgcj.so - kde_java_libgcjdir=`find $kde_java_bindir/.. -name libgcj.so | sed 's,libgcj.so,,'|head -n 1` - dnl Look for libhpi.so and avoid green threads - kde_java_libhpidir=`find $kde_java_bindir/.. -name libhpi.so | grep -v green | sed 's,libhpi.so,,' | head -n 1` - - dnl Now check everything's fine under there - dnl the include dir is our flag for having the JDK - if test -d "$kde_java_includedir"; then - if test ! -x "$kde_java_bindir/javac"; then - AC_MSG_ERROR([javac not found under $kde_java_bindir - it seems you passed a wrong --with-java.]) - fi - if test ! -x "$kde_java_bindir/javah"; then - AC_MSG_ERROR([javah not found under $kde_java_bindir. javac was found though! Use --with-java or --without-java.]) - fi - if test ! -x "$kde_java_bindir/jar"; then - AC_MSG_ERROR([jar not found under $kde_java_bindir. javac was found though! Use --with-java or --without-java.]) - fi - if test ! -r "$kde_java_includedir/jni.h"; then - AC_MSG_ERROR([jni.h not found under $kde_java_includedir. Use --with-java or --without-java.]) - fi - - jni_includes="-I$kde_java_includedir" - dnl Strange thing, jni.h requires jni_md.h which is under genunix here.. - dnl and under linux here.. - - dnl not needed for gcj - - if test "x$kde_java_libgcjdir" = "x"; then - test -d "$kde_java_includedir/linux" && jni_includes="$jni_includes -I$kde_java_includedir/linux" - test -d "$kde_java_includedir/solaris" && jni_includes="$jni_includes -I$kde_java_includedir/solaris" - test -d "$kde_java_includedir/genunix" && jni_includes="$jni_includes -I$kde_java_includedir/genunix" - fi - - else - JAVAC= - jni_includes= - fi - - if test "x$kde_java_libgcjdir" = "x"; then - if test ! -r "$kde_java_libjvmdir/libjvm.so"; then - AC_MSG_ERROR([libjvm.so not found under $kde_java_libjvmdir. Use --without-java.]) - fi - else - if test ! -r "$kde_java_libgcjdir/libgcj.so"; then - AC_MSG_ERROR([libgcj.so not found under $kde_java_libgcjdir. Use --without-java.]) - fi - fi - - if test ! -x "$kde_java_bindir/java"; then - AC_MSG_ERROR([java not found under $kde_java_bindir. javac was found though! Use --with-java or --without-java.]) - fi - - dnl not needed for gcj compile - - if test "x$kde_java_libgcjdir" = "x"; then - if test ! -r "$kde_java_libhpidir/libhpi.so"; then - AC_MSG_ERROR([libhpi.so not found under $kde_java_libhpidir. Use --without-java.]) - fi - fi - - if test -n "$jni_includes"; then - dnl Check for JNI version - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - ac_cxxflags_safe="$CXXFLAGS" - CXXFLAGS="$CXXFLAGS $all_includes $jni_includes" - - AC_TRY_COMPILE([ - #include - ], - [ - #ifndef JNI_VERSION_1_2 - Syntax Error - #endif - ],[ kde_jni_works=yes ], - [ kde_jni_works=no ]) - - if test $kde_jni_works = no; then - AC_MSG_ERROR([Incorrect version of $kde_java_includedir/jni.h. - You need to have Java Development Kit (JDK) version 1.2. - - Use --with-java to specify another location. - Use --without-java to configure without java support. - Or download a newer JDK and try again. - See e.g. http://java.sun.com/products/jdk/1.2 ]) - fi - - CXXFLAGS="$ac_cxxflags_safe" - AC_LANG_RESTORE - - dnl All tests ok, inform and subst the variables - - JAVAC=$kde_java_bindir/javac - JAVAH=$kde_java_bindir/javah - JAR=$kde_java_bindir/jar - AC_DEFINE_UNQUOTED(PATH_JAVA, "$kde_java_bindir/java", [Define where your java executable is]) - if test "x$kde_java_libgcjdir" = "x"; then - JVMLIBS="-L$kde_java_libjvmdir -ljvm -L$kde_java_libhpidir -lhpi" - else - JVMLIBS="-L$kde_java_libgcjdir -lgcj" - fi - AC_MSG_RESULT([java JDK in $kde_java_bindir]) - - else - AC_DEFINE_UNQUOTED(PATH_JAVA, "$kde_java_bindir/java", [Define where your java executable is]) - AC_MSG_RESULT([java JRE in $kde_java_bindir]) - fi -elif test -d "/Library/Java/Home"; then - kde_java_bindir="/Library/Java/Home/bin" - jni_includes="-I/Library/Java/Home/include" - - JAVAC=$kde_java_bindir/javac - JAVAH=$kde_java_bindir/javah - JAR=$kde_java_bindir/jar - JVMLIBS="-Wl,-framework,JavaVM" - - AC_DEFINE_UNQUOTED(PATH_JAVA, "$kde_java_bindir/java", [Define where your java executable is]) - AC_MSG_RESULT([Apple Java Framework]) -else - AC_MSG_RESULT([none found]) -fi - -AC_SUBST(JAVAC) -AC_SUBST(JAVAH) -AC_SUBST(JAR) -AC_SUBST(JVMLIBS) -AC_SUBST(jni_includes) - -# for backward compat -kde_cv_java_includedir=$kde_java_includedir -kde_cv_java_bindir=$kde_java_bindir -]) - -dnl this is a redefinition of autoconf 2.5x's AC_FOREACH. -dnl When the argument list becomes big, as in KDE for AC_OUTPUT in -dnl big packages, m4_foreach is dog-slow. So use our own version of -dnl it. (matz@kde.org) -m4_define([mm_foreach], -[m4_pushdef([$1])_mm_foreach($@)m4_popdef([$1])]) -m4_define([mm_car], [[$1]]) -m4_define([mm_car2], [[$@]]) -m4_define([_mm_foreach], -[m4_if(m4_quote($2), [], [], - [m4_define([$1], mm_car($2))$3[]_mm_foreach([$1], - mm_car2(m4_shift($2)), - [$3])])]) -m4_define([AC_FOREACH], -[mm_foreach([$1], m4_split(m4_normalize([$2])), [$3])]) - -AC_DEFUN([KDE_NEED_FLEX], -[ -kde_libs_safe=$LIBS -LIBS="$LIBS $USER_LDFLAGS" -AM_PROG_LEX -LIBS=$kde_libs_safe -if test -z "$LEXLIB"; then - AC_MSG_ERROR([You need to have flex installed.]) -fi -AC_SUBST(LEXLIB) -]) - -AC_DEFUN([AC_PATH_TQTOPIA], -[ - dnl TODO: use AC_CACHE_VAL - - if test -z "$1"; then - qtopia_minver_maj=1 - qtopia_minver_min=5 - qtopia_minver_pat=0 - else - qtopia_minver_maj=`echo "$1" | sed -e "s/^\(.*\)\..*\..*$/\1/"` - qtopia_minver_min=`echo "$1" | sed -e "s/^.*\.\(.*\)\..*$/\1/"` - qtopia_minver_pat=`echo "$1" | sed -e "s/^.*\..*\.\(.*\)$/\1/"` - fi - - qtopia_minver="$qtopia_minver_maj$qtopia_minver_min$qtopia_minver_pat" - qtopia_minverstr="$qtopia_minver_maj.$qtopia_minver_min.$qtopia_minver_pat" - - AC_REQUIRE([AC_PATH_TQT]) - - AC_MSG_CHECKING([for Qtopia]) - - LIB_TQTOPIA="-lqpe" - AC_SUBST(LIB_TQTOPIA) - - kde_qtopia_dirs="$QPEDIR /opt/Qtopia" - - ac_qtopia_incdir=NO - - AC_ARG_WITH(qtopia-dir, - AC_HELP_STRING([--with-qtopia-dir=DIR],[where the root of Qtopia is installed]), - [ ac_qtopia_incdir="$withval"/include] ) - - qtopia_incdirs="" - for dir in $kde_qtopia_dirs; do - qtopia_incdirs="$qtopia_incdirs $dir/include" - done - - if test ! "$ac_qtopia_incdir" = "NO"; then - qtopia_incdirs="$ac_qtopia_incdir $qtopia_incdirs" - fi - - qtopia_incdir="" - AC_FIND_FILE(qpe/qpeapplication.h, $qtopia_incdirs, qtopia_incdir) - ac_qtopia_incdir="$qtopia_incdir" - - if test -z "$qtopia_incdir"; then - AC_MSG_ERROR([Cannot find Qtopia headers. Please check your installation.]) - fi - - qtopia_ver_maj=`cat $qtopia_incdir/qpe/version.h | sed -n -e 's,.*QPE_VERSION "\(.*\)\..*\..*".*,\1,p'`; - qtopia_ver_min=`cat $qtopia_incdir/qpe/version.h | sed -n -e 's,.*QPE_VERSION ".*\.\(.*\)\..*".*,\1,p'`; - qtopia_ver_pat=`cat $qtopia_incdir/qpe/version.h | sed -n -e 's,.*QPE_VERSION ".*\..*\.\(.*\)".*,\1,p'`; - - qtopia_ver="$qtopia_ver_maj$qtopia_ver_min$qtopia_ver_pat" - qtopia_verstr="$qtopia_ver_maj.$qtopia_ver_min.$qtopia_ver_pat" - if test "$qtopia_ver" -lt "$qtopia_minver"; then - AC_MSG_ERROR([found Qtopia version $qtopia_verstr but version $qtopia_minverstr -is required.]) - fi - - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - - ac_cxxflags_safe="$CXXFLAGS" - ac_ldflags_safe="$LDFLAGS" - ac_libs_safe="$LIBS" - - CXXFLAGS="$CXXFLAGS -I$qtopia_incdir $all_includes" - LDFLAGS="$LDFLAGS $QT_LDFLAGS $all_libraries $USER_LDFLAGS $KDE_MT_LDFLAGS" - LIBS="$LIBS $LIB_TQTOPIA $LIBTQT" - - cat > conftest.$ac_ext < -#include - -int main( int argc, char **argv ) -{ - QPEApplication app( argc, argv ); - return 0; -} -EOF - - if AC_TRY_EVAL(ac_link) && test -s conftest; then - rm -f conftest* - else - rm -f conftest* - AC_MSG_ERROR([Cannot link small Qtopia Application. For more details look at -the end of config.log]) - fi - - CXXFLAGS="$ac_cxxflags_safe" - LDFLAGS="$ac_ldflags_safe" - LIBS="$ac_libs_safe" - - AC_LANG_RESTORE - - QTOPIA_INCLUDES="-I$qtopia_incdir" - AC_SUBST(QTOPIA_INCLUDES) - - AC_MSG_RESULT([found version $qtopia_verstr with headers at $qtopia_incdir]) -]) - - -AC_DEFUN([KDE_INIT_DOXYGEN], -[ -AC_MSG_CHECKING([for Qt docs]) -kde_qtdir= -if test "${with_qt_dir+set}" = set; then - kde_qtdir="$with_qt_dir" -fi - -AC_FIND_FILE(qsql.html, [ $kde_qtdir/doc/html $TQTDIR/doc/html /usr/share/doc/packages/qt3/html /usr/lib/qt/doc /usr/lib/qt3/doc /usr/lib/qt3/doc/html /usr/doc/qt3/html /usr/doc/qt3 /usr/share/doc/qt3-doc /usr/share/qt3/doc/html /usr/X11R6/share/doc/qt/html ], TQTDOCDIR) -AC_MSG_RESULT($TQTDOCDIR) - -AC_SUBST(TQTDOCDIR) - -KDE_FIND_PATH(dot, DOT, [], []) -if test -n "$DOT"; then - KDE_HAVE_DOT="YES" -else - KDE_HAVE_DOT="NO" -fi -AC_SUBST(KDE_HAVE_DOT) -KDE_FIND_PATH(doxygen, DOXYGEN, [], []) -AC_SUBST(DOXYGEN) - -DOXYGEN_PROJECT_NAME="$1" -DOXYGEN_PROJECT_NUMBER="$2" -AC_SUBST(DOXYGEN_PROJECT_NAME) -AC_SUBST(DOXYGEN_PROJECT_NUMBER) - -KDE_HAS_DOXYGEN=no -if test -n "$DOXYGEN" && test -x "$DOXYGEN" && test -f $TQTDOCDIR/qsql.html; then - KDE_HAS_DOXYGEN=yes -fi -AC_SUBST(KDE_HAS_DOXYGEN) - -]) - - -AC_DEFUN([AC_FIND_BZIP2], -[ -AC_MSG_CHECKING([for bzDecompress in libbz2]) -AC_CACHE_VAL(ac_cv_lib_bzip2, -[ -AC_LANG_SAVE -AC_LANG_CPLUSPLUS -kde_save_LIBS="$LIBS" -LIBS="$all_libraries $USER_LDFLAGS -lbz2 $LIBSOCKET" -kde_save_CXXFLAGS="$CXXFLAGS" -CXXFLAGS="$CXXFLAGS $all_includes $USER_INCLUDES" -AC_TRY_LINK(dnl -[ -#define BZ_NO_STDIO -#include -], - [ bz_stream s; (void) bzDecompress(&s); ], - eval "ac_cv_lib_bzip2='-lbz2'", - eval "ac_cv_lib_bzip2=no") -LIBS="$kde_save_LIBS" -CXXFLAGS="$kde_save_CXXFLAGS" -AC_LANG_RESTORE -])dnl -AC_MSG_RESULT($ac_cv_lib_bzip2) - -if test ! "$ac_cv_lib_bzip2" = no; then - BZIP2DIR=bzip2 - - LIBBZ2="$ac_cv_lib_bzip2" - AC_SUBST(LIBBZ2) - -else - - cxx_shared_flag= - ld_shared_flag= - KDE_CHECK_COMPILER_FLAG(shared, [ - ld_shared_flag="-shared" - ]) - KDE_CHECK_COMPILER_FLAG(fPIC, [ - cxx_shared_flag="-fPIC" - ]) - - AC_MSG_CHECKING([for BZ2_bzDecompress in (shared) libbz2]) - AC_CACHE_VAL(ac_cv_lib_bzip2_prefix, - [ - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - kde_save_LIBS="$LIBS" - LIBS="$all_libraries $USER_LDFLAGS $ld_shared_flag -lbz2 $LIBSOCKET" - kde_save_CXXFLAGS="$CXXFLAGS" - CXXFLAGS="$CFLAGS $cxx_shared_flag $all_includes $USER_INCLUDES" - - AC_TRY_LINK(dnl - [ - #define BZ_NO_STDIO - #include - ], - [ bz_stream s; (void) BZ2_bzDecompress(&s); ], - eval "ac_cv_lib_bzip2_prefix='-lbz2'", - eval "ac_cv_lib_bzip2_prefix=no") - LIBS="$kde_save_LIBS" - CXXFLAGS="$kde_save_CXXFLAGS" - AC_LANG_RESTORE - ])dnl - - AC_MSG_RESULT($ac_cv_lib_bzip2_prefix) - - if test ! "$ac_cv_lib_bzip2_prefix" = no; then - BZIP2DIR=bzip2 - - LIBBZ2="$ac_cv_lib_bzip2_prefix" - AC_SUBST(LIBBZ2) - - AC_DEFINE(NEED_BZ2_PREFIX, 1, [Define if the libbz2 functions need the BZ2_ prefix]) - dnl else, we just ignore this - fi - -fi -AM_CONDITIONAL(include_BZIP2, test -n "$BZIP2DIR") -]) - -dnl ------------------------------------------------------------------------ -dnl Try to find the SSL headers and libraries. -dnl $(SSL_LDFLAGS) will be -Lsslliblocation (if needed) -dnl and $(SSL_INCLUDES) will be -Isslhdrlocation (if needed) -dnl ------------------------------------------------------------------------ -dnl -AC_DEFUN([KDE_CHECK_SSL], -[ -LIBSSL="-lssl -lcrypto" -AC_REQUIRE([KDE_CHECK_LIB64]) - -ac_ssl_includes=NO ac_ssl_libraries=NO -ssl_libraries="" -ssl_includes="" -AC_ARG_WITH(ssl-dir, - AC_HELP_STRING([--with-ssl-dir=DIR],[where the root of OpenSSL is installed]), - [ ac_ssl_includes="$withval"/include - ac_ssl_libraries="$withval"/lib$tdelibsuff - ]) - -want_ssl=yes -AC_ARG_WITH(ssl, - AC_HELP_STRING([--without-ssl],[disable SSL checks]), - [want_ssl=$withval]) - -if test $want_ssl = yes; then - -AC_MSG_CHECKING(for OpenSSL) - -AC_CACHE_VAL(ac_cv_have_ssl, -[#try to guess OpenSSL locations - - ssl_incdirs="/usr/include /usr/local/include /usr/ssl/include /usr/local/ssl/include $prefix/include $kde_extra_includes" - ssl_incdirs="$ac_ssl_includes $ssl_incdirs" - AC_FIND_FILE(openssl/ssl.h, $ssl_incdirs, ssl_incdir) - ac_ssl_includes="$ssl_incdir" - - ssl_libdirs="/usr/lib$tdelibsuff /usr/local/lib$tdelibsuff /usr/ssl/lib$tdelibsuff /usr/local/ssl/lib$tdelibsuff $libdir $prefix/lib$tdelibsuff $exec_prefix/lib$tdelibsuff $kde_extra_libs" - if test ! "$ac_ssl_libraries" = "NO"; then - ssl_libdirs="$ac_ssl_libraries $ssl_libdirs" - fi - - test=NONE - ssl_libdir=NONE - for dir in $ssl_libdirs; do - try="ls -1 $dir/libssl*" - if test=`eval $try 2> /dev/null`; then ssl_libdir=$dir; break; else echo "tried $dir" >&AC_FD_CC ; fi - done - - ac_ssl_libraries="$ssl_libdir" - - ac_ldflags_safe="$LDFLAGS" - ac_libs_safe="$LIBS" - - LDFLAGS="$LDFLAGS -L$ssl_libdir $all_libraries" - LIBS="$LIBS $LIBSSL -lRSAglue -lrsaref" - - AC_TRY_LINK(,void RSAPrivateEncrypt(void);RSAPrivateEncrypt();, - ac_ssl_rsaref="yes" - , - ac_ssl_rsaref="no" - ) - - LDFLAGS="$ac_ldflags_safe" - LIBS="$ac_libs_safe" - - if test "$ac_ssl_includes" = NO || test "$ac_ssl_libraries" = NO; then - have_ssl=no - else - have_ssl=yes; - fi - - ]) - - eval "$ac_cv_have_ssl" - - AC_MSG_RESULT([libraries $ac_ssl_libraries, headers $ac_ssl_includes]) - - AC_MSG_CHECKING([whether OpenSSL uses rsaref]) - AC_MSG_RESULT($ac_ssl_rsaref) - - AC_MSG_CHECKING([for easter eggs]) - AC_MSG_RESULT([none found]) - -else - have_ssl=no -fi - -if test "$have_ssl" = yes; then - AC_MSG_CHECKING(for OpenSSL version) - dnl Check for SSL version - AC_CACHE_VAL(ac_cv_ssl_version, - [ - - cat >conftest.$ac_ext < -#include - int main() { - -#ifndef OPENSSL_VERSION_NUMBER - printf("ssl_version=\\"error\\"\n"); -#else - if (OPENSSL_VERSION_NUMBER < 0x00906000) - printf("ssl_version=\\"old\\"\n"); - else - printf("ssl_version=\\"ok\\"\n"); -#endif - return (0); - } -EOF - - ac_save_CPPFLAGS=$CPPFLAGS - if test "$ac_ssl_includes" != "/usr/include"; then - CPPFLAGS="$CPPFLAGS -I$ac_ssl_includes" - fi - - if AC_TRY_EVAL(ac_link); then - - if eval `./conftest 2>&5`; then - if test $ssl_version = error; then - AC_MSG_ERROR([$ssl_incdir/openssl/opensslv.h doesn't define OPENSSL_VERSION_NUMBER !]) - else - if test $ssl_version = old; then - AC_MSG_WARN([OpenSSL version too old. Upgrade to 0.9.6 at least, see http://www.openssl.org. SSL support disabled.]) - have_ssl=no - fi - fi - ac_cv_ssl_version="ssl_version=$ssl_version" - else - AC_MSG_ERROR([Your system couldn't run a small SSL test program. - Check config.log, and if you can't figure it out, send a mail to - David Faure , attaching your config.log]) - fi - - else - AC_MSG_ERROR([Your system couldn't link a small SSL test program. - Check config.log, and if you can't figure it out, send a mail to - David Faure , attaching your config.log]) - fi - CPPFLAGS=$ac_save_CPPFLAGS - - ]) - - eval "$ac_cv_ssl_version" - AC_MSG_RESULT($ssl_version) -fi - -if test "$have_ssl" != yes; then - LIBSSL=""; -else - AC_DEFINE(HAVE_SSL, 1, [If we are going to use OpenSSL]) - ac_cv_have_ssl="have_ssl=yes \ - ac_ssl_includes=$ac_ssl_includes ac_ssl_libraries=$ac_ssl_libraries ac_ssl_rsaref=$ac_ssl_rsaref" - - - ssl_libraries="$ac_ssl_libraries" - ssl_includes="$ac_ssl_includes" - - if test "$ac_ssl_rsaref" = yes; then - LIBSSL="-lssl -lcrypto -lRSAglue -lrsaref" - fi - - if test $ssl_version = "old"; then - AC_DEFINE(HAVE_OLD_SSL_API, 1, [Define if you have OpenSSL < 0.9.6]) - fi -fi - -SSL_INCLUDES= - -if test "$ssl_includes" = "/usr/include"; then - if test -f /usr/kerberos/include/krb5.h; then - SSL_INCLUDES="-I/usr/kerberos/include" - fi -elif test "$ssl_includes" != "/usr/local/include" && test -n "$ssl_includes"; then - SSL_INCLUDES="-I$ssl_includes" -fi - -if test "$ssl_libraries" = "/usr/lib" || test "$ssl_libraries" = "/usr/local/lib" || test -z "$ssl_libraries" || test "$ssl_libraries" = "NONE"; then - SSL_LDFLAGS="" -else - SSL_LDFLAGS="-L$ssl_libraries -R$ssl_libraries" -fi - -AC_SUBST(SSL_INCLUDES) -AC_SUBST(SSL_LDFLAGS) -AC_SUBST(LIBSSL) -]) - -AC_DEFUN([KDE_CHECK_STRLCPY], -[ - AC_REQUIRE([AC_CHECK_STRLCAT]) - AC_REQUIRE([AC_CHECK_STRLCPY]) - AC_CHECK_SIZEOF(size_t) - AC_CHECK_SIZEOF(unsigned long) - - AC_MSG_CHECKING([sizeof size_t == sizeof unsigned long]) - AC_TRY_COMPILE(,[ - #if SIZEOF_SIZE_T != SIZEOF_UNSIGNED_LONG - choke me - #endif - ],AC_MSG_RESULT([yes]),[ - AC_MSG_RESULT(no) - AC_MSG_ERROR([ - Apparently on your system our assumption sizeof size_t == sizeof unsigned long - does not apply. Please mail kde-devel@kde.org with a description of your system! - ]) - ]) -]) - -AC_DEFUN([KDE_CHECK_BINUTILS], -[ - AC_MSG_CHECKING([if ld supports unversioned version maps]) - - kde_save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS -Wl,--version-script=conftest.map" - echo "{ local: extern \"C++\" { foo }; };" > conftest.map - AC_TRY_LINK([int foo;], -[ -#ifdef __INTEL_COMPILER -icc apparently does not support libtools version-info and version-script -at the same time. Dunno where the bug is, but until somebody figured out, -better disable the optional version scripts. -#endif - - foo = 42; -], kde_supports_versionmaps=yes, kde_supports_versionmaps=no) - LDFLAGS="$kde_save_LDFLAGS" - rm -f conftest.map - AM_CONDITIONAL(include_VERSION_SCRIPT, - [test "$kde_supports_versionmaps" = "yes" && test "$kde_use_debug_code" = "no"]) - - AC_MSG_RESULT($kde_supports_versionmaps) -]) - -AC_DEFUN([AM_PROG_OBJC],[ -AC_CHECK_PROGS(OBJC, gcc, gcc) -test -z "$OBJC" && AC_MSG_ERROR([no acceptable objective-c gcc found in \$PATH]) -if test "x${OBJCFLAGS-unset}" = xunset; then - OBJCFLAGS="-g -O2" -fi -AC_SUBST(OBJCFLAGS) -_AM_IF_OPTION([no-dependencies],, [_AM_DEPENDENCIES(OBJC)]) -]) - -AC_DEFUN([KDE_CHECK_PERL], -[ - KDE_FIND_PATH(perl, PERL, [$bindir $exec_prefix/bin $prefix/bin], [ - AC_MSG_ERROR([No Perl found in your $PATH. -We need perl to generate some code.]) - ]) - AC_SUBST(PERL) -]) - -AC_DEFUN([KDE_CHECK_LARGEFILE], -[ -AC_SYS_LARGEFILE -if test "$ac_cv_sys_file_offset_bits" != no; then - CPPFLAGS="$CPPFLAGS -D_FILE_OFFSET_BITS=$ac_cv_sys_file_offset_bits" -fi - -if test "x$ac_cv_sys_large_files" != "xno"; then - CPPFLAGS="$CPPFLAGS -D_LARGE_FILES=1" -fi - -]) - -dnl A small extension to PKG_CHECK_MODULES (defined in pkg.m4.in) -dnl which allows to search for libs that get installed into the KDE prefix. -dnl -dnl Syntax: KDE_PKG_CHECK_MODULES(KSTUFF, libkexif >= 0.2 glib = 1.3.4, action-if, action-not) -dnl defines KSTUFF_LIBS, KSTUFF_CFLAGS, see pkg-config man page -dnl also defines KSTUFF_PKG_ERRORS on error -AC_DEFUN([KDE_PKG_CHECK_MODULES], [ - - PKG_CONFIG_PATH="$prefix/lib${tdelibsuff}/pkgconfig:$PKG_CONFIG_PATH" - if test "$prefix" != "$kde_libs_prefix"; then - PKG_CONFIG_PATH="$kde_libs_prefix/lib${tdelibsuff}/pkgconfig:$PKG_CONFIG_PATH" - fi - export PKG_CONFIG_PATH - PKG_CHECK_MODULES([$1],[$2],[$3],[$4]) -]) - - -dnl Check for PIE support in the compiler and linker -AC_DEFUN([KDE_CHECK_PIE_SUPPORT], -[ - AC_CACHE_CHECK([for PIE support], kde_cv_val_pie_support, - [ - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - safe_CXXFLAGS=$CXXFLAGS - safe_LDFLAGS=$LDFLAGS - CXXFLAGS="$CXXFLAGS -fPIE" - LDFLAGS="$LDFLAGS -pie" - - AC_TRY_LINK([int foo;], [], [kde_cv_val_pie_support=yes], [kde_cv_val_pie_support=no]) - - CXXFLAGS=$safe_CXXFLAGS - LDFLAGS=$safe_LDFLAGS - AC_LANG_RESTORE - ]) - - AC_MSG_CHECKING(if enabling -pie/fPIE support) - - AC_ARG_ENABLE(pie, - AC_HELP_STRING([--enable-pie],[platform supports PIE linking [default=detect]]), - [kde_has_pie_support=$enableval], - [kde_has_pie_support=detect]) - - if test "$kde_has_pie_support" = "detect"; then - kde_has_pie_support=$kde_cv_val_pie_support - fi - - AC_MSG_RESULT([$kde_has_pie_support]) - - KDE_USE_FPIE="" - KDE_USE_PIE="" - - AC_SUBST([KDE_USE_FPIE]) - AC_SUBST([KDE_USE_PIE]) - - if test "$kde_has_pie_support" = "yes"; then - KDE_USE_FPIE="-fPIE" - KDE_USE_PIE="-pie" - fi -]) diff --git a/tde-i18n-uz@cyrillic/aclocal.m4 b/tde-i18n-uz@cyrillic/aclocal.m4 deleted file mode 100644 index ea7b2a0c1fc..00000000000 --- a/tde-i18n-uz@cyrillic/aclocal.m4 +++ /dev/null @@ -1,602 +0,0 @@ -# generated automatically by aclocal 1.10.1 -*- Autoconf -*- - -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, -# 2005, 2006, 2007, 2008 Free Software Foundation, Inc. -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -m4_ifndef([AC_AUTOCONF_VERSION], - [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl -m4_if(AC_AUTOCONF_VERSION, [2.61],, -[m4_warning([this file was generated for autoconf 2.61. -You have another version of autoconf. It may work, but is not guaranteed to. -If you have problems, you may need to regenerate the build system entirely. -To do so, use the procedure documented by the package, typically `autoreconf'.])]) - -# Copyright (C) 2002, 2003, 2005, 2006, 2007 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_AUTOMAKE_VERSION(VERSION) -# ---------------------------- -# Automake X.Y traces this macro to ensure aclocal.m4 has been -# generated from the m4 files accompanying Automake X.Y. -# (This private macro should not be called outside this file.) -AC_DEFUN([AM_AUTOMAKE_VERSION], -[am__api_version='1.10' -dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to -dnl require some minimum version. Point them to the right macro. -m4_if([$1], [1.10.1], [], - [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl -]) - -# _AM_AUTOCONF_VERSION(VERSION) -# ----------------------------- -# aclocal traces this macro to find the Autoconf version. -# This is a private macro too. Using m4_define simplifies -# the logic in aclocal, which can simply ignore this definition. -m4_define([_AM_AUTOCONF_VERSION], []) - -# AM_SET_CURRENT_AUTOMAKE_VERSION -# ------------------------------- -# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. -# This function is AC_REQUIREd by AC_INIT_AUTOMAKE. -AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], -[AM_AUTOMAKE_VERSION([1.10.1])dnl -m4_ifndef([AC_AUTOCONF_VERSION], - [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl -_AM_AUTOCONF_VERSION(AC_AUTOCONF_VERSION)]) - -# AM_AUX_DIR_EXPAND -*- Autoconf -*- - -# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets -# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to -# `$srcdir', `$srcdir/..', or `$srcdir/../..'. -# -# Of course, Automake must honor this variable whenever it calls a -# tool from the auxiliary directory. The problem is that $srcdir (and -# therefore $ac_aux_dir as well) can be either absolute or relative, -# depending on how configure is run. This is pretty annoying, since -# it makes $ac_aux_dir quite unusable in subdirectories: in the top -# source directory, any form will work fine, but in subdirectories a -# relative path needs to be adjusted first. -# -# $ac_aux_dir/missing -# fails when called from a subdirectory if $ac_aux_dir is relative -# $top_srcdir/$ac_aux_dir/missing -# fails if $ac_aux_dir is absolute, -# fails when called from a subdirectory in a VPATH build with -# a relative $ac_aux_dir -# -# The reason of the latter failure is that $top_srcdir and $ac_aux_dir -# are both prefixed by $srcdir. In an in-source build this is usually -# harmless because $srcdir is `.', but things will broke when you -# start a VPATH build or use an absolute $srcdir. -# -# So we could use something similar to $top_srcdir/$ac_aux_dir/missing, -# iff we strip the leading $srcdir from $ac_aux_dir. That would be: -# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` -# and then we would define $MISSING as -# MISSING="\${SHELL} $am_aux_dir/missing" -# This will work as long as MISSING is not called from configure, because -# unfortunately $(top_srcdir) has no meaning in configure. -# However there are other variables, like CC, which are often used in -# configure, and could therefore not use this "fixed" $ac_aux_dir. -# -# Another solution, used here, is to always expand $ac_aux_dir to an -# absolute PATH. The drawback is that using absolute paths prevent a -# configured tree to be moved without reconfiguration. - -AC_DEFUN([AM_AUX_DIR_EXPAND], -[dnl Rely on autoconf to set up CDPATH properly. -AC_PREREQ([2.50])dnl -# expand $ac_aux_dir to an absolute path -am_aux_dir=`cd $ac_aux_dir && pwd` -]) - -# AM_CONDITIONAL -*- Autoconf -*- - -# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006 -# Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 8 - -# AM_CONDITIONAL(NAME, SHELL-CONDITION) -# ------------------------------------- -# Define a conditional. -AC_DEFUN([AM_CONDITIONAL], -[AC_PREREQ(2.52)dnl - ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], - [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl -AC_SUBST([$1_TRUE])dnl -AC_SUBST([$1_FALSE])dnl -_AM_SUBST_NOTMAKE([$1_TRUE])dnl -_AM_SUBST_NOTMAKE([$1_FALSE])dnl -if $2; then - $1_TRUE= - $1_FALSE='#' -else - $1_TRUE='#' - $1_FALSE= -fi -AC_CONFIG_COMMANDS_PRE( -[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then - AC_MSG_ERROR([[conditional "$1" was never defined. -Usually this means the macro was only invoked conditionally.]]) -fi])]) - -# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005 -# Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 8 - -# AM_CONFIG_HEADER is obsolete. It has been replaced by AC_CONFIG_HEADERS. -AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)]) - -# Do all the work for Automake. -*- Autoconf -*- - -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, -# 2005, 2006, 2008 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 13 - -# This macro actually does too much. Some checks are only needed if -# your package does certain things. But this isn't really a big deal. - -# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) -# AM_INIT_AUTOMAKE([OPTIONS]) -# ----------------------------------------------- -# The call with PACKAGE and VERSION arguments is the old style -# call (pre autoconf-2.50), which is being phased out. PACKAGE -# and VERSION should now be passed to AC_INIT and removed from -# the call to AM_INIT_AUTOMAKE. -# We support both call styles for the transition. After -# the next Automake release, Autoconf can make the AC_INIT -# arguments mandatory, and then we can depend on a new Autoconf -# release and drop the old call support. -AC_DEFUN([AM_INIT_AUTOMAKE], -[AC_PREREQ([2.60])dnl -dnl Autoconf wants to disallow AM_ names. We explicitly allow -dnl the ones we care about. -m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl -AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl -AC_REQUIRE([AC_PROG_INSTALL])dnl -if test "`cd $srcdir && pwd`" != "`pwd`"; then - # Use -I$(srcdir) only when $(srcdir) != ., so that make's output - # is not polluted with repeated "-I." - AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl - # test to see if srcdir already configured - if test -f $srcdir/config.status; then - AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) - fi -fi - -# test whether we have cygpath -if test -z "$CYGPATH_W"; then - if (cygpath --version) >/dev/null 2>/dev/null; then - CYGPATH_W='cygpath -w' - else - CYGPATH_W=echo - fi -fi -AC_SUBST([CYGPATH_W]) - -# Define the identity of the package. -dnl Distinguish between old-style and new-style calls. -m4_ifval([$2], -[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl - AC_SUBST([PACKAGE], [$1])dnl - AC_SUBST([VERSION], [$2])], -[_AM_SET_OPTIONS([$1])dnl -dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. -m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,, - [m4_fatal([AC_INIT should be called with package and version arguments])])dnl - AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl - AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl - -_AM_IF_OPTION([no-define],, -[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) - AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl - -# Some tools Automake needs. -AC_REQUIRE([AM_SANITY_CHECK])dnl -AC_REQUIRE([AC_ARG_PROGRAM])dnl -AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) -AM_MISSING_PROG(AUTOCONF, autoconf) -AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) -AM_MISSING_PROG(AUTOHEADER, autoheader) -AM_MISSING_PROG(MAKEINFO, makeinfo) -AM_PROG_INSTALL_SH -AM_PROG_INSTALL_STRIP -AC_REQUIRE([AM_PROG_MKDIR_P])dnl -# We need awk for the "check" target. The system "awk" is bad on -# some platforms. -AC_REQUIRE([AC_PROG_AWK])dnl -AC_REQUIRE([AC_PROG_MAKE_SET])dnl -AC_REQUIRE([AM_SET_LEADING_DOT])dnl -_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], - [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], - [_AM_PROG_TAR([v7])])]) -_AM_IF_OPTION([no-dependencies],, -[AC_PROVIDE_IFELSE([AC_PROG_CC], - [_AM_DEPENDENCIES(CC)], - [define([AC_PROG_CC], - defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl -AC_PROVIDE_IFELSE([AC_PROG_CXX], - [_AM_DEPENDENCIES(CXX)], - [define([AC_PROG_CXX], - defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl -AC_PROVIDE_IFELSE([AC_PROG_OBJC], - [_AM_DEPENDENCIES(OBJC)], - [define([AC_PROG_OBJC], - defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl -]) -]) - - -# When config.status generates a header, we must update the stamp-h file. -# This file resides in the same directory as the config header -# that is generated. The stamp files are numbered to have different names. - -# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the -# loop where config.status creates the headers, so we can generate -# our stamp files there. -AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], -[# Compute $1's index in $config_headers. -_am_arg=$1 -_am_stamp_count=1 -for _am_header in $config_headers :; do - case $_am_header in - $_am_arg | $_am_arg:* ) - break ;; - * ) - _am_stamp_count=`expr $_am_stamp_count + 1` ;; - esac -done -echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) - -# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_PROG_INSTALL_SH -# ------------------ -# Define $install_sh. -AC_DEFUN([AM_PROG_INSTALL_SH], -[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"} -AC_SUBST(install_sh)]) - -# Copyright (C) 2003, 2005 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 2 - -# Check whether the underlying file-system supports filenames -# with a leading dot. For instance MS-DOS doesn't. -AC_DEFUN([AM_SET_LEADING_DOT], -[rm -rf .tst 2>/dev/null -mkdir .tst 2>/dev/null -if test -d .tst; then - am__leading_dot=. -else - am__leading_dot=_ -fi -rmdir .tst 2>/dev/null -AC_SUBST([am__leading_dot])]) - -# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- - -# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005 -# Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 5 - -# AM_MISSING_PROG(NAME, PROGRAM) -# ------------------------------ -AC_DEFUN([AM_MISSING_PROG], -[AC_REQUIRE([AM_MISSING_HAS_RUN]) -$1=${$1-"${am_missing_run}$2"} -AC_SUBST($1)]) - - -# AM_MISSING_HAS_RUN -# ------------------ -# Define MISSING if not defined so far and test if it supports --run. -# If it does, set am_missing_run to use it, otherwise, to nothing. -AC_DEFUN([AM_MISSING_HAS_RUN], -[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -AC_REQUIRE_AUX_FILE([missing])dnl -test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" -# Use eval to expand $SHELL -if eval "$MISSING --run true"; then - am_missing_run="$MISSING --run " -else - am_missing_run= - AC_MSG_WARN([`missing' script is too old or missing]) -fi -]) - -# Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_PROG_MKDIR_P -# --------------- -# Check for `mkdir -p'. -AC_DEFUN([AM_PROG_MKDIR_P], -[AC_PREREQ([2.60])dnl -AC_REQUIRE([AC_PROG_MKDIR_P])dnl -dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P, -dnl while keeping a definition of mkdir_p for backward compatibility. -dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile. -dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of -dnl Makefile.ins that do not define MKDIR_P, so we do our own -dnl adjustment using top_builddir (which is defined more often than -dnl MKDIR_P). -AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl -case $mkdir_p in - [[\\/$]]* | ?:[[\\/]]*) ;; - */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; -esac -]) - -# Helper functions for option handling. -*- Autoconf -*- - -# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 3 - -# _AM_MANGLE_OPTION(NAME) -# ----------------------- -AC_DEFUN([_AM_MANGLE_OPTION], -[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) - -# _AM_SET_OPTION(NAME) -# ------------------------------ -# Set option NAME. Presently that only means defining a flag for this option. -AC_DEFUN([_AM_SET_OPTION], -[m4_define(_AM_MANGLE_OPTION([$1]), 1)]) - -# _AM_SET_OPTIONS(OPTIONS) -# ---------------------------------- -# OPTIONS is a space-separated list of Automake options. -AC_DEFUN([_AM_SET_OPTIONS], -[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) - -# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) -# ------------------------------------------- -# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. -AC_DEFUN([_AM_IF_OPTION], -[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) - -# Check to make sure that the build environment is sane. -*- Autoconf -*- - -# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005 -# Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 4 - -# AM_SANITY_CHECK -# --------------- -AC_DEFUN([AM_SANITY_CHECK], -[AC_MSG_CHECKING([whether build environment is sane]) -# Just in case -sleep 1 -echo timestamp > conftest.file -# Do `set' in a subshell so we don't clobber the current shell's -# arguments. Must try -L first in case configure is actually a -# symlink; some systems play weird games with the mod time of symlinks -# (eg FreeBSD returns the mod time of the symlink's containing -# directory). -if ( - set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` - if test "$[*]" = "X"; then - # -L didn't work. - set X `ls -t $srcdir/configure conftest.file` - fi - rm -f conftest.file - if test "$[*]" != "X $srcdir/configure conftest.file" \ - && test "$[*]" != "X conftest.file $srcdir/configure"; then - - # If neither matched, then we have a broken ls. This can happen - # if, for instance, CONFIG_SHELL is bash and it inherits a - # broken ls alias from the environment. This has actually - # happened. Such a system could not be considered "sane". - AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken -alias in your environment]) - fi - - test "$[2]" = conftest.file - ) -then - # Ok. - : -else - AC_MSG_ERROR([newly created file is older than distributed files! -Check your system clock]) -fi -AC_MSG_RESULT(yes)]) - -# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_PROG_INSTALL_STRIP -# --------------------- -# One issue with vendor `install' (even GNU) is that you can't -# specify the program used to strip binaries. This is especially -# annoying in cross-compiling environments, where the build's strip -# is unlikely to handle the host's binaries. -# Fortunately install-sh will honor a STRIPPROG variable, so we -# always use install-sh in `make install-strip', and initialize -# STRIPPROG with the value of the STRIP variable (set by the user). -AC_DEFUN([AM_PROG_INSTALL_STRIP], -[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl -# Installed binaries are usually stripped using `strip' when the user -# run `make install-strip'. However `strip' might not be the right -# tool to use in cross-compilation environments, therefore Automake -# will honor the `STRIP' environment variable to overrule this program. -dnl Don't test for $cross_compiling = yes, because it might be `maybe'. -if test "$cross_compiling" != no; then - AC_CHECK_TOOL([STRIP], [strip], :) -fi -INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" -AC_SUBST([INSTALL_STRIP_PROGRAM])]) - -# Copyright (C) 2006 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# _AM_SUBST_NOTMAKE(VARIABLE) -# --------------------------- -# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. -# This macro is traced by Automake. -AC_DEFUN([_AM_SUBST_NOTMAKE]) - -# Check how to create a tarball. -*- Autoconf -*- - -# Copyright (C) 2004, 2005 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 2 - -# _AM_PROG_TAR(FORMAT) -# -------------------- -# Check how to create a tarball in format FORMAT. -# FORMAT should be one of `v7', `ustar', or `pax'. -# -# Substitute a variable $(am__tar) that is a command -# writing to stdout a FORMAT-tarball containing the directory -# $tardir. -# tardir=directory && $(am__tar) > result.tar -# -# Substitute a variable $(am__untar) that extract such -# a tarball read from stdin. -# $(am__untar) < result.tar -AC_DEFUN([_AM_PROG_TAR], -[# Always define AMTAR for backward compatibility. -AM_MISSING_PROG([AMTAR], [tar]) -m4_if([$1], [v7], - [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'], - [m4_case([$1], [ustar],, [pax],, - [m4_fatal([Unknown tar format])]) -AC_MSG_CHECKING([how to create a $1 tar archive]) -# Loop over all known methods to create a tar archive until one works. -_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' -_am_tools=${am_cv_prog_tar_$1-$_am_tools} -# Do not fold the above two line into one, because Tru64 sh and -# Solaris sh will not grok spaces in the rhs of `-'. -for _am_tool in $_am_tools -do - case $_am_tool in - gnutar) - for _am_tar in tar gnutar gtar; - do - AM_RUN_LOG([$_am_tar --version]) && break - done - am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' - am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' - am__untar="$_am_tar -xf -" - ;; - plaintar) - # Must skip GNU tar: if it does not support --format= it doesn't create - # ustar tarball either. - (tar --version) >/dev/null 2>&1 && continue - am__tar='tar chf - "$$tardir"' - am__tar_='tar chf - "$tardir"' - am__untar='tar xf -' - ;; - pax) - am__tar='pax -L -x $1 -w "$$tardir"' - am__tar_='pax -L -x $1 -w "$tardir"' - am__untar='pax -r' - ;; - cpio) - am__tar='find "$$tardir" -print | cpio -o -H $1 -L' - am__tar_='find "$tardir" -print | cpio -o -H $1 -L' - am__untar='cpio -i -H $1 -d' - ;; - none) - am__tar=false - am__tar_=false - am__untar=false - ;; - esac - - # If the value was cached, stop now. We just wanted to have am__tar - # and am__untar set. - test -n "${am_cv_prog_tar_$1}" && break - - # tar/untar a dummy directory, and stop if the command works - rm -rf conftest.dir - mkdir conftest.dir - echo GrepMe > conftest.dir/file - AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) - rm -rf conftest.dir - if test -s conftest.tar; then - AM_RUN_LOG([$am__untar /dev/null 2>&1 && break - fi -done -rm -rf conftest.dir - -AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) -AC_MSG_RESULT([$am_cv_prog_tar_$1])]) -AC_SUBST([am__tar]) -AC_SUBST([am__untar]) -]) # _AM_PROG_TAR - -m4_include([acinclude.m4]) diff --git a/tde-i18n-uz@cyrillic/admin b/tde-i18n-uz@cyrillic/admin deleted file mode 120000 index 82e4e9df5de..00000000000 --- a/tde-i18n-uz@cyrillic/admin +++ /dev/null @@ -1 +0,0 @@ -../admin \ No newline at end of file diff --git a/tde-i18n-uz@cyrillic/config.h.in b/tde-i18n-uz@cyrillic/config.h.in deleted file mode 100644 index c85de2df769..00000000000 --- a/tde-i18n-uz@cyrillic/config.h.in +++ /dev/null @@ -1,25 +0,0 @@ -/* config.h.in. Generated from configure.in by autoheader. */ - -/* Name of package */ -#undef PACKAGE - -/* Define to the address where bug reports for this package should be sent. */ -#undef PACKAGE_BUGREPORT - -/* Define to the full name of this package. */ -#undef PACKAGE_NAME - -/* Define to the full name and version of this package. */ -#undef PACKAGE_STRING - -/* Define to the one symbol short name of this package. */ -#undef PACKAGE_TARNAME - -/* Define to the version of this package. */ -#undef PACKAGE_VERSION - -/* Version number of package */ -#undef VERSION - -/* Defined if compiling without arts */ -#undef WITHOUT_ARTS diff --git a/tde-i18n-uz@cyrillic/configure.files b/tde-i18n-uz@cyrillic/configure.files deleted file mode 100644 index 1083352ba44..00000000000 --- a/tde-i18n-uz@cyrillic/configure.files +++ /dev/null @@ -1 +0,0 @@ -configure.in.in diff --git a/tde-i18n-uz@cyrillic/configure.in b/tde-i18n-uz@cyrillic/configure.in deleted file mode 100644 index a68f16a092e..00000000000 --- a/tde-i18n-uz@cyrillic/configure.in +++ /dev/null @@ -1,79 +0,0 @@ -dnl ======================================================= -dnl FILE: configure.in.in -dnl ======================================================= - -AC_INIT(messages/Makefile.am) -AM_INIT_AUTOMAKE(kde-i18n-uz@cyrillic, "3.5.10") -AM_CONFIG_HEADER(config.h) -AC_SUBST(AUTODIRS) -AM_KDE_WITH_NLS -AC_CREATE_KFSSTND(default) -KDE_SET_PREFIX -AC_SUBST_KFSSTND -AC_PROG_INSTALL -AC_PROG_LN_S -KDE_CREATE_SUBDIRSLIST -AC_CONFIG_FILES([ Makefile ]) -AC_CONFIG_FILES([ messages/Makefile ]) -AC_CONFIG_FILES([ messages/tdeaccessibility/Makefile ]) -AC_CONFIG_FILES([ messages/tdeaddons/Makefile ]) -AC_CONFIG_FILES([ messages/tdeadmin/Makefile ]) -AC_CONFIG_FILES([ messages/tdeartwork/Makefile ]) -AC_CONFIG_FILES([ messages/tdebase/Makefile ]) -AC_CONFIG_FILES([ messages/tdeedu/Makefile ]) -AC_CONFIG_FILES([ messages/tdegames/Makefile ]) -AC_CONFIG_FILES([ messages/tdegraphics/Makefile ]) -AC_CONFIG_FILES([ messages/tdelibs/Makefile ]) -AC_CONFIG_FILES([ messages/tdemultimedia/Makefile ]) -AC_CONFIG_FILES([ messages/tdenetwork/Makefile ]) -AC_CONFIG_FILES([ messages/tdepim/Makefile ]) -AC_CONFIG_FILES([ messages/tdesdk/Makefile ]) -AC_CONFIG_FILES([ messages/tdetoys/Makefile ]) -AC_CONFIG_FILES([ messages/tdeutils/Makefile ]) -AC_CONFIG_FILES([ messages/tdevelop/Makefile ]) -AC_OUTPUT -# Check if KDE_SET_PREFIX was called, and --prefix was passed to configure -if test -n "$kde_libs_prefix" -a -n "$given_prefix"; then - # And if so, warn when they don't match - if test "$kde_libs_prefix" != "$given_prefix"; then - # And if kde doesn't know about the prefix yet - echo ":"`tde-config --path exe`":" | grep ":$given_prefix/bin/:" 2>&1 >/dev/null - if test $? -ne 0; then - echo "" - echo "Warning: you chose to install this package in $given_prefix," - echo "but KDE was found in $kde_libs_prefix." - echo "For this to work, you will need to tell KDE about the new prefix, by ensuring" - echo "that TDEDIRS contains it, e.g. export TDEDIRS=$given_prefix:$kde_libs_prefix" - echo "Then restart KDE." - echo "" - fi - fi -fi - -if test x$GXX = "xyes" -a x$kde_have_gcc_visibility = "xyes" -a x$kde_cv_val_qt_gcc_visibility_patched = "xno"; then - echo "" - echo "Your GCC supports symbol visibility, but the patch for Qt supporting visibility" - echo "was not included. Therefore, GCC symbol visibility support remains disabled." - echo "" - echo "For better performance, consider including the Qt visibility supporting patch" - echo "located at:" - echo "" - echo "http://bugs.kde.org/show_bug.cgi?id=109386" - echo "" - echo "and recompile all of Qt and KDE. Note, this is entirely optional and" - echo "everything will continue to work just fine without it." - echo "" -fi - -if test "$all_tests" = "bad"; then - if test ! "$cache_file" = "/dev/null"; then - echo "" - echo "Please remove the file $cache_file after changing your setup" - echo "so that configure will find the changes next time." - echo "" - fi -else - echo "" - echo "Good - your configure finished. Start make now" - echo "" -fi diff --git a/tde-i18n-uz@cyrillic/install-sh b/tde-i18n-uz@cyrillic/install-sh deleted file mode 100755 index ca9c7c4c82d..00000000000 --- a/tde-i18n-uz@cyrillic/install-sh +++ /dev/null @@ -1,394 +0,0 @@ -#!/bin/sh -# install - install a program, script, or datafile - -scriptversion=2005-11-07.23 - -# This originates from X11R5 (mit/util/scripts/install.sh), which was -# later released in X11R6 (xc/config/util/install.sh) with the -# following copyright and license. -# -# Copyright (C) 1994 X Consortium -# -# Permission is hereby granted, free of charge, to any person obtaining a copy -# of this software and associated documentation files (the "Software"), to -# deal in the Software without restriction, including without limitation the -# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or -# sell copies of the Software, and to permit persons to whom the Software is -# furnished to do so, subject to the following conditions: -# -# The above copyright notice and this permission notice shall be included in -# all copies or substantial portions of the Software. -# -# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN -# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- -# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. -# -# Except as contained in this notice, the name of the X Consortium shall not -# be used in advertising or otherwise to promote the sale, use or other deal- -# ings in this Software without prior written authorization from the X Consor- -# tium. -# -# -# FSF changes to this file are in the public domain. -# -# Calling this script install-sh is preferred over install.sh, to prevent -# `make' implicit rules from creating a file called install from it -# when there is no Makefile. -# -# This script is compatible with the BSD install script, but was written -# from scratch. It can only install one file at a time, a restriction -# shared with many OS's install programs. - -# set DOITPROG to echo to test this script - -# Don't use :- since 4.3BSD and earlier shells don't like it. -doit="${DOITPROG-}" - -# put in absolute paths if you don't have them in your path; or use env. vars. - -mvprog="${MVPROG-mv}" -cpprog="${CPPROG-cp}" -chmodprog="${CHMODPROG-chmod}" -chownprog="${CHOWNPROG-chown}" -chgrpprog="${CHGRPPROG-chgrp}" -stripprog="${STRIPPROG-strip}" -rmprog="${RMPROG-rm}" -mkdirprog="${MKDIRPROG-mkdir}" - -posix_glob= -posix_mkdir= - -# Symbolic mode for testing mkdir with directories. -# It is the same as 755, but also tests that "u+" works. -test_mode=u=rwx,g=rx,o=rx,u+wx - -# Desired mode of installed file. -mode=0755 - -# Desired mode of newly created intermediate directories. -# It is empty if not known yet. -intermediate_mode= - -chmodcmd=$chmodprog -chowncmd= -chgrpcmd= -stripcmd= -rmcmd="$rmprog -f" -mvcmd="$mvprog" -src= -dst= -dir_arg= -dstarg= -no_target_directory= - -usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE - or: $0 [OPTION]... SRCFILES... DIRECTORY - or: $0 [OPTION]... -t DIRECTORY SRCFILES... - or: $0 [OPTION]... -d DIRECTORIES... - -In the 1st form, copy SRCFILE to DSTFILE. -In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. -In the 4th, create DIRECTORIES. - -Options: --c (ignored) --d create directories instead of installing files. --g GROUP $chgrpprog installed files to GROUP. --m MODE $chmodprog installed files to MODE. --o USER $chownprog installed files to USER. --s $stripprog installed files. --t DIRECTORY install into DIRECTORY. --T report an error if DSTFILE is a directory. ---help display this help and exit. ---version display version info and exit. - -Environment variables override the default commands: - CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG -" - -while test -n "$1"; do - case $1 in - -c) shift - continue;; - - -d) dir_arg=true - shift - continue;; - - -g) chgrpcmd="$chgrpprog $2" - shift - shift - continue;; - - --help) echo "$usage"; exit $?;; - - -m) mode=$2 - shift - shift - continue;; - - -o) chowncmd="$chownprog $2" - shift - shift - continue;; - - -s) stripcmd=$stripprog - shift - continue;; - - -t) dstarg=$2 - shift - shift - continue;; - - -T) no_target_directory=true - shift - continue;; - - --version) echo "$0 $scriptversion"; exit $?;; - - *) # When -d is used, all remaining arguments are directories to create. - # When -t is used, the destination is already specified. - test -n "$dir_arg$dstarg" && break - # Otherwise, the last argument is the destination. Remove it from $@. - for arg - do - if test -n "$dstarg"; then - # $@ is not empty: it contains at least $arg. - set fnord "$@" "$dstarg" - shift # fnord - fi - shift # arg - dstarg=$arg - done - break;; - esac -done - -if test -z "$1"; then - if test -z "$dir_arg"; then - echo "$0: no input file specified." >&2 - exit 1 - fi - # It's OK to call `install-sh -d' without argument. - # This can happen when creating conditional directories. - exit 0 -fi - -test -n "$dir_arg" || trap '(exit $?); exit' 1 2 13 15 - -for src -do - # Protect names starting with `-'. - case $src in - -*) src=./$src ;; - esac - - if test -n "$dir_arg"; then - dst=$src - dstdir=$dst - test -d "$dstdir" - dstdir_status=$? - else - - # Waiting for this to be detected by the "$cpprog $src $dsttmp" command - # might cause directories to be created, which would be especially bad - # if $src (and thus $dsttmp) contains '*'. - if test ! -f "$src" && test ! -d "$src"; then - echo "$0: $src does not exist." >&2 - exit 1 - fi - - if test -z "$dstarg"; then - echo "$0: no destination specified." >&2 - exit 1 - fi - - dst=$dstarg - # Protect names starting with `-'. - case $dst in - -*) dst=./$dst ;; - esac - - # If destination is a directory, append the input filename; won't work - # if double slashes aren't ignored. - if test -d "$dst"; then - if test -n "$no_target_directory"; then - echo "$0: $dstarg: Is a directory" >&2 - exit 1 - fi - dstdir=$dst - dst=$dstdir/`basename "$src"` - dstdir_status=0 - else - # Prefer dirname, but fall back on a substitute if dirname fails. - dstdir=` - (dirname "$dst") 2>/dev/null || - expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$dst" : 'X\(//\)[^/]' \| \ - X"$dst" : 'X\(//\)$' \| \ - X"$dst" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || - echo X"$dst" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q' - ` - - test -d "$dstdir" - dstdir_status=$? - fi - fi - - obsolete_mkdir_used=false - - if test $dstdir_status != 0; then - case $posix_mkdir in - '') - posix_mkdir=false - if $mkdirprog -m $test_mode -p -- / >/dev/null 2>&1; then - posix_mkdir=true - else - # Remove any dirs left behind by ancient mkdir implementations. - rmdir ./-m "$test_mode" ./-p ./-- 2>/dev/null - fi ;; - esac - - if - $posix_mkdir && { - - # With -d, create the new directory with the user-specified mode. - # Otherwise, create it using the same intermediate mode that - # mkdir -p would use when creating intermediate directories. - # POSIX says that this mode is "$(umask -S),u+wx", so use that - # if umask -S works. - - if test -n "$dir_arg"; then - mkdir_mode=$mode - else - case $intermediate_mode in - '') - if umask_S=`(umask -S) 2>/dev/null`; then - intermediate_mode=$umask_S,u+wx - else - intermediate_mode=$test_mode - fi ;; - esac - mkdir_mode=$intermediate_mode - fi - - $mkdirprog -m "$mkdir_mode" -p -- "$dstdir" - } - then : - else - - # mkdir does not conform to POSIX, or it failed possibly due to - # a race condition. Create the directory the slow way, step by - # step, checking for races as we go. - - case $dstdir in - /*) pathcomp=/ ;; - -*) pathcomp=./ ;; - *) pathcomp= ;; - esac - - case $posix_glob in - '') - if (set -f) 2>/dev/null; then - posix_glob=true - else - posix_glob=false - fi ;; - esac - - oIFS=$IFS - IFS=/ - $posix_glob && set -f - set fnord $dstdir - shift - $posix_glob && set +f - IFS=$oIFS - - for d - do - test "x$d" = x && continue - - pathcomp=$pathcomp$d - if test ! -d "$pathcomp"; then - $mkdirprog "$pathcomp" - # Don't fail if two instances are running concurrently. - test -d "$pathcomp" || exit 1 - fi - pathcomp=$pathcomp/ - done - obsolete_mkdir_used=true - fi - fi - - if test -n "$dir_arg"; then - { test -z "$chowncmd" || $doit $chowncmd "$dst"; } && - { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } && - { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false || - test -z "$chmodcmd" || $doit $chmodcmd "$mode" "$dst"; } || exit 1 - else - - # Make a couple of temp file names in the proper directory. - dsttmp=$dstdir/_inst.$$_ - rmtmp=$dstdir/_rm.$$_ - - # Trap to clean up those temp files at exit. - trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 - - # Copy the file name to the temp name. - $doit $cpprog "$src" "$dsttmp" && - - # and set any options; do chmod last to preserve setuid bits. - # - # If any of these fail, we abort the whole thing. If we want to - # ignore errors from any of these, just make sure not to ignore - # errors from the above "$doit $cpprog $src $dsttmp" command. - # - { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \ - && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \ - && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \ - && { test -z "$chmodcmd" || $doit $chmodcmd "$mode" "$dsttmp"; } && - - # Now rename the file to the real destination. - { $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null \ - || { - # The rename failed, perhaps because mv can't rename something else - # to itself, or perhaps because mv is so ancient that it does not - # support -f. - - # Now remove or move aside any old file at destination location. - # We try this two ways since rm can't unlink itself on some - # systems and the destination file might be busy for other - # reasons. In this case, the final cleanup might fail but the new - # file should still install successfully. - { - if test -f "$dst"; then - $doit $rmcmd -f "$dst" 2>/dev/null \ - || { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null \ - && { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }; }\ - || { - echo "$0: cannot unlink or rename $dst" >&2 - (exit 1); exit 1 - } - else - : - fi - } && - - # Now rename the file to the real destination. - $doit $mvcmd "$dsttmp" "$dst" - } - } || exit 1 - - trap '' 0 - fi -done diff --git a/tde-i18n-uz@cyrillic/messages/Makefile.am b/tde-i18n-uz@cyrillic/messages/Makefile.am deleted file mode 100644 index fa93c3bda19..00000000000 --- a/tde-i18n-uz@cyrillic/messages/Makefile.am +++ /dev/null @@ -1,3 +0,0 @@ -KDE_LANG = uz@cyrillic -SUBDIRS = $(AUTODIRS) -POFILES = AUTO diff --git a/tde-i18n-uz@cyrillic/messages/tdeaccessibility/Makefile.am b/tde-i18n-uz@cyrillic/messages/tdeaccessibility/Makefile.am deleted file mode 100644 index fa93c3bda19..00000000000 --- a/tde-i18n-uz@cyrillic/messages/tdeaccessibility/Makefile.am +++ /dev/null @@ -1,3 +0,0 @@ -KDE_LANG = uz@cyrillic -SUBDIRS = $(AUTODIRS) -POFILES = AUTO diff --git a/tde-i18n-uz@cyrillic/messages/tdeaddons/Makefile.am b/tde-i18n-uz@cyrillic/messages/tdeaddons/Makefile.am deleted file mode 100644 index fa93c3bda19..00000000000 --- a/tde-i18n-uz@cyrillic/messages/tdeaddons/Makefile.am +++ /dev/null @@ -1,3 +0,0 @@ -KDE_LANG = uz@cyrillic -SUBDIRS = $(AUTODIRS) -POFILES = AUTO diff --git a/tde-i18n-uz@cyrillic/messages/tdeadmin/Makefile.am b/tde-i18n-uz@cyrillic/messages/tdeadmin/Makefile.am deleted file mode 100644 index fa93c3bda19..00000000000 --- a/tde-i18n-uz@cyrillic/messages/tdeadmin/Makefile.am +++ /dev/null @@ -1,3 +0,0 @@ -KDE_LANG = uz@cyrillic -SUBDIRS = $(AUTODIRS) -POFILES = AUTO diff --git a/tde-i18n-uz@cyrillic/messages/tdeartwork/Makefile.am b/tde-i18n-uz@cyrillic/messages/tdeartwork/Makefile.am deleted file mode 100644 index fa93c3bda19..00000000000 --- a/tde-i18n-uz@cyrillic/messages/tdeartwork/Makefile.am +++ /dev/null @@ -1,3 +0,0 @@ -KDE_LANG = uz@cyrillic -SUBDIRS = $(AUTODIRS) -POFILES = AUTO diff --git a/tde-i18n-uz@cyrillic/messages/tdebase/Makefile.am b/tde-i18n-uz@cyrillic/messages/tdebase/Makefile.am deleted file mode 100644 index fa93c3bda19..00000000000 --- a/tde-i18n-uz@cyrillic/messages/tdebase/Makefile.am +++ /dev/null @@ -1,3 +0,0 @@ -KDE_LANG = uz@cyrillic -SUBDIRS = $(AUTODIRS) -POFILES = AUTO diff --git a/tde-i18n-uz@cyrillic/messages/tdeedu/Makefile.am b/tde-i18n-uz@cyrillic/messages/tdeedu/Makefile.am deleted file mode 100644 index fa93c3bda19..00000000000 --- a/tde-i18n-uz@cyrillic/messages/tdeedu/Makefile.am +++ /dev/null @@ -1,3 +0,0 @@ -KDE_LANG = uz@cyrillic -SUBDIRS = $(AUTODIRS) -POFILES = AUTO diff --git a/tde-i18n-uz@cyrillic/messages/tdegames/Makefile.am b/tde-i18n-uz@cyrillic/messages/tdegames/Makefile.am deleted file mode 100644 index fa93c3bda19..00000000000 --- a/tde-i18n-uz@cyrillic/messages/tdegames/Makefile.am +++ /dev/null @@ -1,3 +0,0 @@ -KDE_LANG = uz@cyrillic -SUBDIRS = $(AUTODIRS) -POFILES = AUTO diff --git a/tde-i18n-uz@cyrillic/messages/tdegraphics/Makefile.am b/tde-i18n-uz@cyrillic/messages/tdegraphics/Makefile.am deleted file mode 100644 index fa93c3bda19..00000000000 --- a/tde-i18n-uz@cyrillic/messages/tdegraphics/Makefile.am +++ /dev/null @@ -1,3 +0,0 @@ -KDE_LANG = uz@cyrillic -SUBDIRS = $(AUTODIRS) -POFILES = AUTO diff --git a/tde-i18n-uz@cyrillic/messages/tdelibs/Makefile.am b/tde-i18n-uz@cyrillic/messages/tdelibs/Makefile.am deleted file mode 100644 index fa93c3bda19..00000000000 --- a/tde-i18n-uz@cyrillic/messages/tdelibs/Makefile.am +++ /dev/null @@ -1,3 +0,0 @@ -KDE_LANG = uz@cyrillic -SUBDIRS = $(AUTODIRS) -POFILES = AUTO diff --git a/tde-i18n-uz@cyrillic/messages/tdemultimedia/Makefile.am b/tde-i18n-uz@cyrillic/messages/tdemultimedia/Makefile.am deleted file mode 100644 index fa93c3bda19..00000000000 --- a/tde-i18n-uz@cyrillic/messages/tdemultimedia/Makefile.am +++ /dev/null @@ -1,3 +0,0 @@ -KDE_LANG = uz@cyrillic -SUBDIRS = $(AUTODIRS) -POFILES = AUTO diff --git a/tde-i18n-uz@cyrillic/messages/tdenetwork/Makefile.am b/tde-i18n-uz@cyrillic/messages/tdenetwork/Makefile.am deleted file mode 100644 index fa93c3bda19..00000000000 --- a/tde-i18n-uz@cyrillic/messages/tdenetwork/Makefile.am +++ /dev/null @@ -1,3 +0,0 @@ -KDE_LANG = uz@cyrillic -SUBDIRS = $(AUTODIRS) -POFILES = AUTO diff --git a/tde-i18n-uz@cyrillic/messages/tdepim/Makefile.am b/tde-i18n-uz@cyrillic/messages/tdepim/Makefile.am deleted file mode 100644 index fa93c3bda19..00000000000 --- a/tde-i18n-uz@cyrillic/messages/tdepim/Makefile.am +++ /dev/null @@ -1,3 +0,0 @@ -KDE_LANG = uz@cyrillic -SUBDIRS = $(AUTODIRS) -POFILES = AUTO diff --git a/tde-i18n-uz@cyrillic/messages/tdesdk/Makefile.am b/tde-i18n-uz@cyrillic/messages/tdesdk/Makefile.am deleted file mode 100644 index fa93c3bda19..00000000000 --- a/tde-i18n-uz@cyrillic/messages/tdesdk/Makefile.am +++ /dev/null @@ -1,3 +0,0 @@ -KDE_LANG = uz@cyrillic -SUBDIRS = $(AUTODIRS) -POFILES = AUTO diff --git a/tde-i18n-uz@cyrillic/messages/tdetoys/Makefile.am b/tde-i18n-uz@cyrillic/messages/tdetoys/Makefile.am deleted file mode 100644 index fa93c3bda19..00000000000 --- a/tde-i18n-uz@cyrillic/messages/tdetoys/Makefile.am +++ /dev/null @@ -1,3 +0,0 @@ -KDE_LANG = uz@cyrillic -SUBDIRS = $(AUTODIRS) -POFILES = AUTO diff --git a/tde-i18n-uz@cyrillic/messages/tdeutils/Makefile.am b/tde-i18n-uz@cyrillic/messages/tdeutils/Makefile.am deleted file mode 100644 index fa93c3bda19..00000000000 --- a/tde-i18n-uz@cyrillic/messages/tdeutils/Makefile.am +++ /dev/null @@ -1,3 +0,0 @@ -KDE_LANG = uz@cyrillic -SUBDIRS = $(AUTODIRS) -POFILES = AUTO diff --git a/tde-i18n-uz@cyrillic/messages/tdevelop/Makefile.am b/tde-i18n-uz@cyrillic/messages/tdevelop/Makefile.am deleted file mode 100644 index fa93c3bda19..00000000000 --- a/tde-i18n-uz@cyrillic/messages/tdevelop/Makefile.am +++ /dev/null @@ -1,3 +0,0 @@ -KDE_LANG = uz@cyrillic -SUBDIRS = $(AUTODIRS) -POFILES = AUTO diff --git a/tde-i18n-uz@cyrillic/missing b/tde-i18n-uz@cyrillic/missing deleted file mode 100755 index d55d3ad42ff..00000000000 --- a/tde-i18n-uz@cyrillic/missing +++ /dev/null @@ -1,346 +0,0 @@ -#! /bin/sh -# Common stub for a few missing GNU programs while installing. - -scriptversion=2004-09-07.08 - -# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004 -# Free Software Foundation, Inc. -# Originally by Fran,cois Pinard , 1996. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. - -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -if test $# -eq 0; then - echo 1>&2 "Try \`$0 --help' for more information" - exit 1 -fi - -run=: - -# In the cases where this matters, `missing' is being run in the -# srcdir already. -if test -f configure.ac; then - configure_ac=configure.ac -else - configure_ac=configure.in -fi - -msg="missing on your system" - -case "$1" in ---run) - # Try to run requested program, and just exit if it succeeds. - run= - shift - "$@" && exit 0 - # Exit code 63 means version mismatch. This often happens - # when the user try to use an ancient version of a tool on - # a file that requires a minimum version. In this case we - # we should proceed has if the program had been absent, or - # if --run hadn't been passed. - if test $? = 63; then - run=: - msg="probably too old" - fi - ;; - - -h|--h|--he|--hel|--help) - echo "\ -$0 [OPTION]... PROGRAM [ARGUMENT]... - -Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an -error status if there is no known handling for PROGRAM. - -Options: - -h, --help display this help and exit - -v, --version output version information and exit - --run try to run the given command, and emulate it if it fails - -Supported PROGRAM values: - aclocal touch file \`aclocal.m4' - autoconf touch file \`configure' - autoheader touch file \`config.h.in' - automake touch all \`Makefile.in' files - bison create \`y.tab.[ch]', if possible, from existing .[ch] - flex create \`lex.yy.c', if possible, from existing .c - help2man touch the output file - lex create \`lex.yy.c', if possible, from existing .c - makeinfo touch the output file - tar try tar, gnutar, gtar, then tar without non-portable flags - yacc create \`y.tab.[ch]', if possible, from existing .[ch] - -Send bug reports to ." - exit 0 - ;; - - -v|--v|--ve|--ver|--vers|--versi|--versio|--version) - echo "missing $scriptversion (GNU Automake)" - exit 0 - ;; - - -*) - echo 1>&2 "$0: Unknown \`$1' option" - echo 1>&2 "Try \`$0 --help' for more information" - exit 1 - ;; - -esac - -# Now exit if we have it, but it failed. Also exit now if we -# don't have it and --version was passed (most likely to detect -# the program). -case "$1" in - lex|yacc) - # Not GNU programs, they don't have --version. - ;; - - tar) - if test -n "$run"; then - echo 1>&2 "ERROR: \`tar' requires --run" - exit 1 - elif test "x$2" = "x--version" || test "x$2" = "x--help"; then - exit 1 - fi - ;; - - *) - if test -z "$run" && ($1 --version) > /dev/null 2>&1; then - # We have it, but it failed. - exit 1 - elif test "x$2" = "x--version" || test "x$2" = "x--help"; then - # Could not run --version or --help. This is probably someone - # running `$TOOL --version' or `$TOOL --help' to check whether - # $TOOL exists and not knowing $TOOL uses missing. - exit 1 - fi - ;; -esac - -# If it does not exist, or fails to run (possibly an outdated version), -# try to emulate it. -case "$1" in - aclocal*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`acinclude.m4' or \`${configure_ac}'. You might want - to install the \`Automake' and \`Perl' packages. Grab them from - any GNU archive site." - touch aclocal.m4 - ;; - - autoconf) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`${configure_ac}'. You might want to install the - \`Autoconf' and \`GNU m4' packages. Grab them from any GNU - archive site." - touch configure - ;; - - autoheader) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`acconfig.h' or \`${configure_ac}'. You might want - to install the \`Autoconf' and \`GNU m4' packages. Grab them - from any GNU archive site." - files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}` - test -z "$files" && files="config.h" - touch_files= - for f in $files; do - case "$f" in - *:*) touch_files="$touch_files "`echo "$f" | - sed -e 's/^[^:]*://' -e 's/:.*//'`;; - *) touch_files="$touch_files $f.in";; - esac - done - touch $touch_files - ;; - - automake*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. - You might want to install the \`Automake' and \`Perl' packages. - Grab them from any GNU archive site." - find . -type f -name Makefile.am -print | - sed 's/\.am$/.in/' | - while read f; do touch "$f"; done - ;; - - autom4te) - echo 1>&2 "\ -WARNING: \`$1' is needed, but is $msg. - You might have modified some files without having the - proper tools for further handling them. - You can get \`$1' as part of \`Autoconf' from any GNU - archive site." - - file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'` - test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'` - if test -f "$file"; then - touch $file - else - test -z "$file" || exec >$file - echo "#! /bin/sh" - echo "# Created by GNU Automake missing as a replacement of" - echo "# $ $@" - echo "exit 0" - chmod +x $file - exit 1 - fi - ;; - - bison|yacc) - echo 1>&2 "\ -WARNING: \`$1' $msg. You should only need it if - you modified a \`.y' file. You may need the \`Bison' package - in order for those modifications to take effect. You can get - \`Bison' from any GNU archive site." - rm -f y.tab.c y.tab.h - if [ $# -ne 1 ]; then - eval LASTARG="\${$#}" - case "$LASTARG" in - *.y) - SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` - if [ -f "$SRCFILE" ]; then - cp "$SRCFILE" y.tab.c - fi - SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` - if [ -f "$SRCFILE" ]; then - cp "$SRCFILE" y.tab.h - fi - ;; - esac - fi - if [ ! -f y.tab.h ]; then - echo >y.tab.h - fi - if [ ! -f y.tab.c ]; then - echo 'main() { return 0; }' >y.tab.c - fi - ;; - - lex|flex) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified a \`.l' file. You may need the \`Flex' package - in order for those modifications to take effect. You can get - \`Flex' from any GNU archive site." - rm -f lex.yy.c - if [ $# -ne 1 ]; then - eval LASTARG="\${$#}" - case "$LASTARG" in - *.l) - SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` - if [ -f "$SRCFILE" ]; then - cp "$SRCFILE" lex.yy.c - fi - ;; - esac - fi - if [ ! -f lex.yy.c ]; then - echo 'main() { return 0; }' >lex.yy.c - fi - ;; - - help2man) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified a dependency of a manual page. You may need the - \`Help2man' package in order for those modifications to take - effect. You can get \`Help2man' from any GNU archive site." - - file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` - if test -z "$file"; then - file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'` - fi - if [ -f "$file" ]; then - touch $file - else - test -z "$file" || exec >$file - echo ".ab help2man is required to generate this page" - exit 1 - fi - ;; - - makeinfo) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified a \`.texi' or \`.texinfo' file, or any other file - indirectly affecting the aspect of the manual. The spurious - call might also be the consequence of using a buggy \`make' (AIX, - DU, IRIX). You might want to install the \`Texinfo' package or - the \`GNU make' package. Grab either from any GNU archive site." - file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` - if test -z "$file"; then - file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` - file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file` - fi - touch $file - ;; - - tar) - shift - - # We have already tried tar in the generic part. - # Look for gnutar/gtar before invocation to avoid ugly error - # messages. - if (gnutar --version > /dev/null 2>&1); then - gnutar "$@" && exit 0 - fi - if (gtar --version > /dev/null 2>&1); then - gtar "$@" && exit 0 - fi - firstarg="$1" - if shift; then - case "$firstarg" in - *o*) - firstarg=`echo "$firstarg" | sed s/o//` - tar "$firstarg" "$@" && exit 0 - ;; - esac - case "$firstarg" in - *h*) - firstarg=`echo "$firstarg" | sed s/h//` - tar "$firstarg" "$@" && exit 0 - ;; - esac - fi - - echo 1>&2 "\ -WARNING: I can't seem to be able to run \`tar' with the given arguments. - You may want to install GNU tar or Free paxutils, or check the - command line arguments." - exit 1 - ;; - - *) - echo 1>&2 "\ -WARNING: \`$1' is needed, and is $msg. - You might have modified some files without having the - proper tools for further handling them. Check the \`README' file, - it often tells you about the needed prerequisites for installing - this package. You may also peek at any GNU archive site, in case - some other package would contain this missing \`$1' program." - exit 1 - ;; -esac - -exit 0 diff --git a/tde-i18n-uz@cyrillic/mkinstalldirs b/tde-i18n-uz@cyrillic/mkinstalldirs deleted file mode 100755 index 6ac3d96b095..00000000000 --- a/tde-i18n-uz@cyrillic/mkinstalldirs +++ /dev/null @@ -1,149 +0,0 @@ -#! /bin/sh -# mkinstalldirs --- make directory hierarchy - -scriptversion=2005-06-29.22 - -# Original author: Noah Friedman -# Created: 1993-05-16 -# Public domain. -# -# This file is maintained in Automake, please report -# bugs to or send patches to -# . - -errstatus=0 -dirmode= - -usage="\ -Usage: mkinstalldirs [-h] [--help] [--version] [-m MODE] DIR ... - -Create each directory DIR (with mode MODE, if specified), including all -leading file name components. - -Report bugs to ." - -# process command line arguments -while test $# -gt 0 ; do - case $1 in - -h | --help | --h*) # -h for help - echo "$usage" - exit $? - ;; - -m) # -m PERM arg - shift - test $# -eq 0 && { echo "$usage" 1>&2; exit 1; } - dirmode=$1 - shift - ;; - --version) - echo "$0 $scriptversion" - exit $? - ;; - --) # stop option processing - shift - break - ;; - -*) # unknown option - echo "$usage" 1>&2 - exit 1 - ;; - *) # first non-opt arg - break - ;; - esac -done - -for file -do - if test -d "$file"; then - shift - else - break - fi -done - -case $# in - 0) exit 0 ;; -esac - -# Solaris 8's mkdir -p isn't thread-safe. If you mkdir -p a/b and -# mkdir -p a/c at the same time, both will detect that a is missing, -# one will create a, then the other will try to create a and die with -# a "File exists" error. This is a problem when calling mkinstalldirs -# from a parallel make. We use --version in the probe to restrict -# ourselves to GNU mkdir, which is thread-safe. -case $dirmode in - '') - if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then - echo "mkdir -p -- $*" - exec mkdir -p -- "$@" - else - # On NextStep and OpenStep, the `mkdir' command does not - # recognize any option. It will interpret all options as - # directories to create, and then abort because `.' already - # exists. - test -d ./-p && rmdir ./-p - test -d ./--version && rmdir ./--version - fi - ;; - *) - if mkdir -m "$dirmode" -p --version . >/dev/null 2>&1 && - test ! -d ./--version; then - echo "mkdir -m $dirmode -p -- $*" - exec mkdir -m "$dirmode" -p -- "$@" - else - # Clean up after NextStep and OpenStep mkdir. - for d in ./-m ./-p ./--version "./$dirmode"; - do - test -d $d && rmdir $d - done - fi - ;; -esac - -for file -do - case $file in - /*) pathcomp=/ ;; - *) pathcomp= ;; - esac - oIFS=$IFS - IFS=/ - set fnord $file - shift - IFS=$oIFS - - for d - do - test "x$d" = x && continue - - pathcomp=$pathcomp$d - case $pathcomp in - -*) pathcomp=./$pathcomp ;; - esac - - if test ! -d "$pathcomp"; then - echo "mkdir $pathcomp" - - mkdir "$pathcomp" || lasterr=$? - - if test ! -d "$pathcomp"; then - errstatus=$lasterr - else - if test ! -z "$dirmode"; then - echo "chmod $dirmode $pathcomp" - lasterr= - chmod "$dirmode" "$pathcomp" || lasterr=$? - - if test ! -z "$lasterr"; then - errstatus=$lasterr - fi - fi - fi - fi - - pathcomp=$pathcomp/ - done -done - -exit $errstatus diff --git a/tde-i18n-uz@cyrillic/stamp-h.in b/tde-i18n-uz@cyrillic/stamp-h.in deleted file mode 100644 index e69de29bb2d..00000000000 -- cgit v1.2.1