From 1200ad8874609663fc3aaab281c9db7127b90db7 Mon Sep 17 00:00:00 2001 From: TDE Weblate Date: Sat, 22 Dec 2018 16:32:53 +0000 Subject: Update translation files tdegraphics / kdvi Updated by "Update PO files to match POT (msgmerge)" hook in Weblate. (cherry picked from commit 3b268265fa12c8a9a18d621eb739d79341bf37ac) --- tde-i18n-zh_TW/messages/tdegraphics/kdvi.po | 829 +++++++++++++++------------- 1 file changed, 434 insertions(+), 395 deletions(-) (limited to 'tde-i18n-zh_TW/messages') diff --git a/tde-i18n-zh_TW/messages/tdegraphics/kdvi.po b/tde-i18n-zh_TW/messages/tdegraphics/kdvi.po index e3bf61896f3..c2d76552144 100644 --- a/tde-i18n-zh_TW/messages/tdegraphics/kdvi.po +++ b/tde-i18n-zh_TW/messages/tdegraphics/kdvi.po @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: kdvi\n" -"POT-Creation-Date: 2014-09-29 12:06-0500\n" +"POT-Creation-Date: 2018-12-21 14:20+0100\n" "PO-Revision-Date: 2006-07-04 11:23+0800\n" "Last-Translator: Frank Weng (a.k.a. Franklin) \n" @@ -19,6 +19,18 @@ msgstr "" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 1.11.2\n" +#: _translatorinfo:1 +msgid "" +"_: NAME OF TRANSLATORS\n" +"Your names" +msgstr "Jing-Jong Shyue,Edward G.J. Lee" + +#: _translatorinfo:2 +msgid "" +"_: EMAIL OF TRANSLATORS\n" +"Your emails" +msgstr "shyue@sonoma.com.tw,edt1023@speedymail.org" + #: TeXFontDefinition.cpp:108 msgid "Cannot find font %1, file %2." msgstr "無法開啟字型 %1，檔案 %2。" @@ -47,7 +59,8 @@ msgstr "無法識別字型檔案 %1 的格式" #: TeXFont_PFB.cpp:44 msgid "" -"The font file %1 could be opened and read, but its font format is unsupported." +"The font file %1 could be opened and read, but its font format is " +"unsupported." msgstr "這個 %1 檔案雖可讀啟，但此種字型格式不被支援。" #: TeXFont_PFB.cpp:50 @@ -109,28 +122,18 @@ msgstr "錯誤的 PK 檔案 (%1), 太多位元" msgid "Font has non-square aspect ratio " msgstr "字型有非方塊的長寬比" -#: _translatorinfo.cpp:1 -msgid "" -"_: NAME OF TRANSLATORS\n" -"Your names" -msgstr "Jing-Jong Shyue,Edward G.J. Lee" - -#: _translatorinfo.cpp:3 -msgid "" -"_: EMAIL OF TRANSLATORS\n" -"Your emails" -msgstr "shyue@sonoma.com.tw,edt1023@speedymail.org" - #: dviFile.cpp:112 msgid "The DVI file does not start with the preamble." msgstr "DVI 檔沒有以 preamble 為開頭。" #: dviFile.cpp:117 msgid "" -"The DVI file contains the wrong version of DVI output for this program. Hint: " -"If you use the typesetting system Omega, you have to use a special program, " -"such as oxdvi." -msgstr "DVI 輸出檔的版本錯誤。指引：如果是使用 Omega 來排版的話，請改用專用的程式，例如 oxdvi。" +"The DVI file contains the wrong version of DVI output for this program. " +"Hint: If you use the typesetting system Omega, you have to use a special " +"program, such as oxdvi." +msgstr "" +"DVI 輸出檔的版本錯誤。指引：如果是使用 Omega 來排版的話，請改用專用的程式，例" +"如 oxdvi。" #: dviFile.cpp:155 msgid "" @@ -161,7 +164,9 @@ msgstr "無法載入 DVI 檔。" msgid "" "File corruption! KDVI had trouble interpreting your DVI " "file. Most likely this means that the DVI file is broken." -msgstr "檔案有誤！ KDVI 無法解譯您的 DVI 檔。很可能您的 DVI 檔已毀損。" +msgstr "" +"檔案有誤！ KDVI 無法解譯您的 DVI 檔。很可能您的 DVI 檔已" +"毀損。" #: dviRenderer.cpp:212 dviRenderer.cpp:483 msgid "DVI File Error" @@ -173,10 +178,16 @@ msgstr "KDVI: 資訊" #: dviRenderer.cpp:277 msgid "" -"This DVI file contains source file information. You may click into the text " -"with the middle mouse button, and an editor will open the TeX-source file " -"immediately." -msgstr "這個 DVI 檔含有原始文稿資訊。您可以按一下滑鼠中鍵來開啟 TeX 文稿的編輯器。" +"This DVI file contains source file information. You may click into the " +"text with the middle mouse button, and an editor will open the TeX-source " +"file immediately." +msgstr "" +"這個 DVI 檔含有原始文稿資訊。您可以按一下滑鼠中鍵來開啟 TeX 文稿的編輯" +"器。" + +#: dviRenderer.cpp:284 +msgid "Do not show this message again" +msgstr "" #: dviRenderer.cpp:286 msgid "Explain in more detail..." @@ -198,9 +209,11 @@ msgstr "所有外部 PostScript 檔已嵌入你的文件中。你最好現在儲 #: dviRenderer.cpp:439 msgid "" -"File error. The specified file '%1' does not exist. KDVI " -"already tried to add the ending '.dvi'." -msgstr "檔案錯誤。所指定的檔案 '%1' 不存在。KDVI 已嘗試加入 '.dvi' 副檔名。" +"File error. The specified file '%1' does not exist. " +"KDVI already tried to add the ending '.dvi'." +msgstr "" +"檔案錯誤。所指定的檔案 '%1' 不存在。KDVI 已嘗試加入 '." +"dvi' 副檔名。" #: dviRenderer.cpp:441 msgid "File Error!" @@ -208,28 +221,29 @@ msgstr "檔案錯誤！" #: dviRenderer.cpp:452 msgid "" -"Could not open file %1 which has type " -"%2. KDVI can only load DVI (.dvi) files." +"Could not open file %1 which has type " +"%2. KDVI can only load DVI (.dvi) files." msgstr "" -"無法開啟 %1，檔案類型為 %2" -"。KDVI 只能載入 DVI (.dvi) 檔。" +"無法開啟 %1，檔案類型為 %2。KDVI 只能載入 DVI (.dvi) 檔。" #: dviRenderer.cpp:463 dviRenderer.cpp:481 msgid "" -"File corruption! KDVI had trouble interpreting your DVI file. Most likely " -"this means that the DVI file is broken." +"File corruption! KDVI had trouble interpreting your DVI file. Most " +"likely this means that the DVI file is broken." msgstr "檔案有誤！KDVI 無法解譯您的 DVI 檔。很可能您的 DVI 檔已毀損。" #: dviRenderer.cpp:640 msgid "" -"You have asked KDVI to locate the place in the DVI file which corresponds " -"to line %1 in the TeX-file %2. It seems, however, that the DVI " -"file does not contain the necessary source file information. We refer to the " -"manual of KDVI for a detailed explanation on how to include this information. " -"Press the F1 key to open the manual." +"You have asked KDVI to locate the place in the DVI file which " +"corresponds to line %1 in the TeX-file %2. It seems, " +"however, that the DVI file does not contain the necessary source file " +"information. We refer to the manual of KDVI for a detailed explanation on " +"how to include this information. Press the F1 key to open the manual." msgstr "" -"您要 KDVI 找到在 %2 TeX 文稿的 %1 行的相對應位置。但此 DVI 檔並沒有含必要的 TeX " -"文稿資訊。請按 F1 鍵，參考 KDVI 手冊的詳細說明。" +"您要 KDVI 找到在 %2 TeX 文稿的 %1 行的相對應位置。但此 " +"DVI 檔並沒有含必要的 TeX 文稿資訊。請按 F1 鍵，參考 KDVI 手冊的詳細說明。" #: dviRenderer.cpp:645 dviRenderer.cpp:685 msgid "Could Not Find Reference" @@ -237,14 +251,15 @@ msgstr "無法找到參考" #: dviRenderer.cpp:683 msgid "" -"KDVI was not able to locate the place in the DVI file which corresponds to " -"line %1 in the TeX-file %2." -msgstr "KDVI 無法找到在 %2 TeX 文稿的 %1 行的相對應位置。" +"KDVI was not able to locate the place in the DVI file which corresponds " +"to line %1 in the TeX-file %2." +msgstr "" +"KDVI 無法找到在 %2 TeX 文稿的 %1 行的相對應位置。" #: dviRenderer.cpp:737 msgid "" -"The DVI-file refers to the TeX-file %1 " -"which could not be found." +"The DVI-file refers to the TeX-file %1 which could not be " +"found." msgstr "TeX 文稿 %1 的相對應 DVI 檔找不到。" #: dviRenderer.cpp:740 @@ -254,10 +269,11 @@ msgstr "無法找到檔案" #: dviRenderer.cpp:747 msgid "" "You have not yet specified an editor for inverse search. Please choose your " -"favorite editor in the DVI options dialog " -"which you will find in the Settings-menu." +"favorite editor in the DVI options dialog which you will " +"find in the Settings-menu." msgstr "" -"您尚未指定編輯器。請由 設定-選單 中的 DVI 選項對話框 指定您順手的編輯器。" +"您尚未指定編輯器。請由 設定-選單 中的 DVI 選項對話框" +" 指定您順手的編輯器。" #: dviRenderer.cpp:752 msgid "Need to Specify Editor" @@ -269,22 +285,17 @@ msgstr "使用 TDE 的 Kate 編輯器" #: dviRenderer.cpp:785 msgid "" -"The external program" -"
" -"
%1" -"
" -"
which was used to call the editor for inverse search, reported an error. " -"You might wish to look at the document info dialog " -"which you will find in the File-Menu for a precise error report. The manual for " -"KDVI contains a detailed explanation how to set up your editor for use with " -"KDVI, and a list of common problems." +"The external program

%1

which " +"was used to call the editor for inverse search, reported an error. You might " +"wish to look at the document info dialog which you will " +"find in the File-Menu for a precise error report. The manual for KDVI " +"contains a detailed explanation how to set up your editor for use with KDVI, " +"and a list of common problems." msgstr "" -"用來呼叫編輯器的外部程式 " -"
" -"
%1" -"
" -"
傳回錯誤。您可能需要查看一下 文件資訊對話框 的 檔案-選單 來得知詳細的情形。KDVI " -"的使用手冊有詳細的說明如何設定編輯器及一些其他的問題說明。" +"用來呼叫編輯器的外部程式

%1

" +"傳回錯誤。您可能需要查看一下 文件資訊對話框 的 檔案-選單 來" +"得知詳細的情形。KDVI 的使用手冊有詳細的說明如何設定編輯器及一些其他的問題說" +"明。" #: dviRenderer.cpp:791 msgid "Starting the editor..." @@ -320,17 +331,18 @@ msgstr "出現未知的 op-code %1。" #: dviRenderer_export.cpp:84 msgid "" -"KDVI could not locate the program 'dvipdfm' on your computer. That program is " -"essential for the export function to work. You can, however, convert the " -"DVI-file to PDF using the print function of KDVI, but that will often produce " -"documents which print ok, but are of inferior quality if viewed in the Acrobat " -"Reader. It may be wise to upgrade to a more recent version of your TeX " -"distribution which includes the 'dvipdfm' program.\n" -"Hint to the perplexed system administrator: KDVI uses the shell's PATH variable " -"when looking for programs." +"KDVI could not locate the program 'dvipdfm' on your computer. That program " +"is essential for the export function to work. You can, however, convert the " +"DVI-file to PDF using the print function of KDVI, but that will often " +"produce documents which print ok, but are of inferior quality if viewed in " +"the Acrobat Reader. It may be wise to upgrade to a more recent version of " +"your TeX distribution which includes the 'dvipdfm' program.\n" +"Hint to the perplexed system administrator: KDVI uses the shell's PATH " +"variable when looking for programs." msgstr "" -"KDVI 找不到 'dvipdfm' 程式。這個程式是輸出功能所必需。當然也可以由 KDVI 的列印功能來轉換 DVI 為 " -"PDF，但通常這樣一來印表沒有問題，由 Acrobat Reader 閱覽時則品質較差。更新您的 TeX 系統至含 'dvipdfm' 程式的版本會較明智。\n" +"KDVI 找不到 'dvipdfm' 程式。這個程式是輸出功能所必需。當然也可以由 KDVI 的列" +"印功能來轉換 DVI 為 PDF，但通常這樣一來印表沒有問題，由 Acrobat Reader 閱覽時" +"則品質較差。更新您的 TeX 系統至含 'dvipdfm' 程式的版本會較明智。\n" "給還沒進入狀況的系統管理者：KDVI 使用 shell 的 PATH 環境變數來找程式。" #: dviRenderer_export.cpp:99 @@ -341,15 +353,13 @@ msgstr "*.pdf|可攜式文件格式 (*.pdf)" msgid "Export File As" msgstr "輸出檔案為" -#: dviRenderer_export.cpp:104 dviRenderer_export.cpp:203 -#: kdvi_multipage.cpp:164 +#: dviRenderer_export.cpp:104 dviRenderer_export.cpp:203 kdvi_multipage.cpp:164 msgid "" "The file %1\n" "exists. Do you want to overwrite that file?" msgstr "檔案 %1 已存在。要覆寫檔案嗎？" -#: dviRenderer_export.cpp:105 dviRenderer_export.cpp:204 -#: kdvi_multipage.cpp:165 +#: dviRenderer_export.cpp:105 dviRenderer_export.cpp:204 kdvi_multipage.cpp:165 msgid "Overwrite File" msgstr "覆寫檔案" @@ -363,11 +373,12 @@ msgstr "使用 dvipdfm 輸出為 PDF 檔" #: dviRenderer_export.cpp:114 msgid "" -"KDVI is currently using the external program 'dvipdfm' to convert your DVI-file " -"to PDF. Sometimes that can take a while because dvipdfm needs to generate its " -"own bitmap fonts Please be patient." +"KDVI is currently using the external program 'dvipdfm' to convert your DVI-" +"file to PDF. Sometimes that can take a while because dvipdfm needs to " +"generate its own bitmap fonts Please be patient." msgstr "" -"KDVI 目前使用 'dvipdfm' 外部程式來轉換 DVI 為 PDF 格式。可能會花些時間，因為 dvipdfm 要產生所需的點陣字型，請耐心等候。" +"KDVI 目前使用 'dvipdfm' 外部程式來轉換 DVI 為 PDF 格式。可能會花些時間，因為 " +"dvipdfm 要產生所需的點陣字型，請耐心等候。" #: dviRenderer_export.cpp:118 msgid "Waiting for dvipdfm to finish..." @@ -383,12 +394,13 @@ msgstr "請耐心等候" #: dviRenderer_export.cpp:137 msgid "" -"The external program 'dvipdf', which was used to export the file, reported " -"an error. You might wish to look at the document info dialog " -"which you will find in the File-Menu for a precise error report." +"The external program 'dvipdf', which was used to export the file, " +"reported an error. You might wish to look at the document info " +"dialog which you will find in the File-Menu for a precise error " +"report." msgstr "" -"'dvipdf' 外部程式是用來輸出 PDF 檔，並報告是否有錯誤。您可以查看 文件資訊對話框 " -"的檔案選單來得到更精確的錯誤訊息。" +"'dvipdf' 外部程式是用來輸出 PDF 檔，並報告是否有錯誤。您可以查看 " +"文件資訊對話框 的檔案選單來得到更精確的錯誤訊息。" #: dviRenderer_export.cpp:140 msgid "Export: %1 to PDF" @@ -400,17 +412,16 @@ msgid "" "PostScript format, and cannot be handled by the dvips " "program that KDVI uses interally to print or to export to PostScript. The " "functionality that you require is therefore unavailable in this version of " -"KDVI.

" -"

As a workaround, you can use the File/Export As" -"-Menu to save this file in PDF format, and then use a PDF viewer.

" -"

The author of KDVI apologizes for the inconvenience. If enough users " -"complain, the missing functionality might later be added.

" +"KDVI.

As a workaround, you can use the File/Export As-" +"Menu to save this file in PDF format, and then use a PDF viewer.

The " +"author of KDVI apologizes for the inconvenience. If enough users complain, " +"the missing functionality might later be added.

" msgstr "" -"" -"

與這個 DVI 檔關聯的是一個非 PostScript 格式的外部圖形檔，無法經由 dvips " -"處理。因此在這一版的 KDVI 中無法處理您的需求。

" -"

您可以用選單中的「檔案」→「輸出為」功能將檔案存成 PDF 格式，再使用 PDF 檢視器讀取。

" -"

KDVI 的作者為您的不方便道歉。如果有夠多的使用者都需要此功能，我們會試著加入。

" +"

與這個 DVI 檔關聯的是一個非 PostScript 格式的外部圖形檔，無法經由 " +"dvips 處理。因此在這一版的 KDVI 中無法處理您的需求。

" +"您可以用選單中的「檔案」→「輸出為」功能將檔案存成 PDF 格式，再使用 PDF 檢視器" +"讀取。

KDVI 的作者為您的不方便道歉。如果有夠多的使用者都需要此功能，我" +"們會試著加入。

" #: dviRenderer_export.cpp:188 msgid "Functionality Unavailable" @@ -426,12 +437,12 @@ msgstr "使用 dvips 來輸出 PostScript 檔" #: dviRenderer_export.cpp:217 msgid "" -"KDVI is currently using the external program 'dvips' to convert your DVI-file " -"to PostScript. Sometimes that can take a while because dvips needs to generate " -"its own bitmap fonts Please be patient." +"KDVI is currently using the external program 'dvips' to convert your DVI-" +"file to PostScript. Sometimes that can take a while because dvips needs to " +"generate its own bitmap fonts Please be patient." msgstr "" -"KDVI 目前使用 'dvips' 外部程式來轉換 DVI 為 PostScript 格式。可能會花些時間，因為 dvips " -"要產生所需的點陣字型，請耐心等候。" +"KDVI 目前使用 'dvips' 外部程式來轉換 DVI 為 PostScript 格式。可能會花些時間，" +"因為 dvips 要產生所需的點陣字型，請耐心等候。" #: dviRenderer_export.cpp:221 msgid "Waiting for dvips to finish..." @@ -443,12 +454,13 @@ msgstr "dvips 進度對話框" #: dviRenderer_export.cpp:300 msgid "" -"The external program 'dvips', which was used to export the file, reported " -"an error. You might wish to look at the document info dialog " -"which you will find in the File-Menu for a precise error report." +"The external program 'dvips', which was used to export the file, " +"reported an error. You might wish to look at the document info " +"dialog which you will find in the File-Menu for a precise error " +"report." msgstr "" -"'dvips' 外部程式是用來輸出 PostScript 檔，並報告是否有錯誤。您可以查看 文件資訊對話框 " -"的檔案選單來得到更精確的錯誤訊息。" +"'dvips' 外部程式是用來輸出 PostScript 檔，並報告是否有錯誤。您可以查看 " +"文件資訊對話框 的檔案選單來得到更精確的錯誤訊息。" #: dviRenderer_export.cpp:303 msgid "Export: %1 to PostScript" @@ -461,8 +473,7 @@ msgstr "嵌入 %1" #: dviRenderer_prescan.cpp:105 msgid "" -"Page %1: The PostScript file %2 could not be found." -"
" +"Page %1: The PostScript file %2 could not be found.
" msgstr "頁 %1：PostScript 檔案 %2 找不到。
" #: dviRenderer_prescan.cpp:255 @@ -484,9 +495,12 @@ msgstr "中止字型產生。不要啦。" #: fontpool.cpp:48 msgid "" "KDVI is currently generating bitmap fonts which are needed to display your " -"document. For this, KDVI uses a number of external programs, such as MetaFont. " -"You can find the output of these programs later in the document info dialog." -msgstr "KDVI 正在產生點陣字來做為顯示文件用。KDVI 會使用一些外部程式來達到這個目的。您可以由文件資訊對話框得知這些外部程式名稱。" +"document. For this, KDVI uses a number of external programs, such as " +"MetaFont. You can find the output of these programs later in the document " +"info dialog." +msgstr "" +"KDVI 正在產生點陣字來做為顯示文件用。KDVI 會使用一些外部程式來達到這個目的。" +"您可以由文件資訊對話框得知這些外部程式名稱。" #: fontpool.cpp:51 msgid "KDVI is generating fonts. Please wait." @@ -508,6 +522,10 @@ msgstr "TeX 名稱" msgid "Family" msgstr "字族" +#: fontpool.cpp:192 +msgid "Zoom" +msgstr "" + #: fontpool.cpp:193 msgid "Type" msgstr "種類" @@ -526,10 +544,11 @@ msgstr "找不到檔案" #: fontpool.cpp:284 msgid "" -"" -"

KDVI was not able to locate all the font files which are necessary to " +"

KDVI was not able to locate all the font files which are necessary to " "display the current DVI file. Your document might be unreadable.

" -msgstr "

KDVI 無法找到完整的字型來顯示這個 DVI 檔。您的文件有可能沒辦法閱讀。

" +msgstr "" +"

KDVI 無法找到完整的字型來顯示這個 DVI 檔。您的文件有可能沒辦法閱讀。" +"

" #: fontpool.cpp:288 msgid "Not All Font Files Found" @@ -543,17 +562,19 @@ msgstr "找尋字型......" msgid "" "

KDVI relies on the kpsewhich program to locate font files on your " "hard disc and to generate PK fonts, if necessary.

" -msgstr "

KDVI 使用 kpsewhich 程式來尋找您硬碟中的字型檔，需要時並產生 PK 字型。

" +msgstr "" +"

KDVI 使用 kpsewhich 程式來尋找您硬碟中的字型檔，需要時並產生 PK 字" +"型。

" #: fontpool.cpp:361 msgid "" "

The shell process for the kpsewhich program could not be started. " "Consequently, some font files could not be found, and your document might by " -"unreadable. If this error is reproducable please report the issue to the KDVI " -"developers using the 'Help' menu." -"

" +"unreadable. If this error is reproducable please report the issue to the " +"KDVI developers using the 'Help' menu.

" msgstr "" -"

kpsewhich 程式無法啟動。因此，有些字型檔找不到，您的文件可能無法閱讀。如果可以重現此錯誤，請到「說明」選單中向 KDVI 開發團隊回報。

" +"

kpsewhich 程式無法啟動。因此，有些字型檔找不到，您的文件可能無法閱讀。如果" +"可以重現此錯誤，請到「說明」選單中向 KDVI 開發團隊回報。

" #: fontpool.cpp:367 fontpool.cpp:405 msgid "Problem locating fonts - KDVI" @@ -566,19 +587,20 @@ msgstr "產生字型時被中斷 - KDVI" #: fontpool.cpp:394 msgid "" "

There were problems running kpsewhich. As a result, some font files could " -"not be located, and your document might be unreadable.

" -"

Possible reason: The kpsewhich program is perhaps not installed on " -"your system, or it cannot be found in the current search path.

" -"

What you can do: The kpsewhich program is normally contained in " -"distributions of the TeX typesetting system. If TeX is not installed on your " -"system, you could install the TeTeX distribution (www.tetex.org). If you are " -"sure that TeX is installed, please try to use the kpsewhich program from the " -"command line to check if it really works.

" +"not be located, and your document might be unreadable.

Possible " +"reason: The kpsewhich program is perhaps not installed on your system, " +"or it cannot be found in the current search path.

What you can do: The kpsewhich program is normally contained in distributions of the TeX " +"typesetting system. If TeX is not installed on your system, you could " +"install the TeTeX distribution (www.tetex.org). If you are sure that TeX is " +"installed, please try to use the kpsewhich program from the command line to " +"check if it really works.

" msgstr "" -"

執行 kpsewhich 時發生問題。因此，有些字型檔找不到，您的文件可能無法閱讀。

" -"

可能的原因有：kpsewhich 程式沒有安裝，或不在您的執行路徑上。

" -"

建議處理方式：kpsewhich 程式通常會跟著 Tex 系統套件一起散佈。如果您沒有安裝 Tex，您可以安裝 TeTex " -"套件（www.tetex.org）。如果您確定 Tex 已安裝，請試著從命令列執行 kpsewhich，看看是否有問題。

" +"

執行 kpsewhich 時發生問題。因此，有些字型檔找不到，您的文件可能無法閱讀。" +"

可能的原因有：kpsewhich 程式沒有安裝，或不在您的執行路徑上。

建議處理方式：kpsewhich 程式通常會跟著 Tex 系統套件一起散佈。如" +"果您沒有安裝 Tex，您可以安裝 TeTex 套件（www.tetex.org）。如果您確定 Tex 已安" +"裝，請試著從命令列執行 kpsewhich，看看是否有問題。

" #: fontpool.cpp:590 msgid "Currently generating %1 at %2 dpi" @@ -608,6 +630,11 @@ msgstr "DVI 檔案" msgid "Information on the currently loaded DVI-file." msgstr "目前載入的 DVI 檔資訊。" +#: infodialog.cpp:33 +#, fuzzy +msgid "Fonts" +msgstr "TeX 字型" + #: infodialog.cpp:38 msgid "Information on currently loaded fonts." msgstr "目前載入的字型資訊。" @@ -615,9 +642,11 @@ msgstr "目前載入的字型資訊。" #: infodialog.cpp:39 msgid "" "This text field shows detailed information about the currently loaded fonts. " -"This is useful for experts who want to locate problems in the setup of TeX or " -"KDVI." -msgstr "這個文字欄位會顯示所載入字型的詳細資訊。這對想解決 TeX 或 KDVI 問題的老手會很有幫助。" +"This is useful for experts who want to locate problems in the setup of TeX " +"or KDVI." +msgstr "" +"這個文字欄位會顯示所載入字型的詳細資訊。這對想解決 TeX 或 KDVI 問題的老手會很" +"有幫助。" #: infodialog.cpp:43 msgid "External Programs" @@ -634,11 +663,11 @@ msgstr "外部程式的輸出。" #: infodialog.cpp:48 msgid "" "KDVI uses external programs, such as MetaFont, dvipdfm or dvips. This text " -"field shows the output of these programs. That is useful for experts who want " -"to find problems in the setup of TeX or KDVI." +"field shows the output of these programs. That is useful for experts who " +"want to find problems in the setup of TeX or KDVI." msgstr "" -"KDVI 使用一些外部程式，例如 MetaFont, dvipdfm 或 dvips。這個文字欄位會顯示這些程式的輸出。這對想解決 TeX 或 KDVI " -"問題的老手會很有幫助。" +"KDVI 使用一些外部程式，例如 MetaFont, dvipdfm 或 dvips。這個文字欄位會顯示這" +"些程式的輸出。這對想解決 TeX 或 KDVI 問題的老手會很有幫助。" #: infodialog.cpp:64 msgid "There is no DVI file loaded at the moment." @@ -696,8 +725,8 @@ msgstr "DVI 檔預覽器，由 Tex 系統套件產生。" #: kdvi_multipage.cpp:105 msgid "" -"This program displays Device Independent (DVI) files which are produced by the " -"TeX typesetting system.\n" +"This program displays Device Independent (DVI) files which are produced by " +"the TeX typesetting system.\n" "KDVI 1.3 is based on original code from KDVI version 0.43 and xdvik." msgstr "" "這個程式會顯示 DVI 檔，由 Tex 系統套件產生。\n" @@ -751,8 +780,8 @@ msgstr "印出 %1" #: kdvi_multipage.cpp:251 msgid "" "The list of pages you selected was empty.\n" -"Maybe you made an error in selecting the pages, e.g. by giving an invalid range " -"like '7-2'." +"Maybe you made an error in selecting the pages, e.g. by giving an invalid " +"range like '7-2'." msgstr "" "您所選的頁數是空的。\n" "或許您選頁的操作有誤，例如給了個無效的範圍，如 '7-2'。" @@ -766,11 +795,12 @@ msgid "" "This function searches the DVI file for plain text. Unfortunately, this " "version of KDVI treats only plain ASCII characters properly. Symbols, " "ligatures, mathematical formulae, accented characters, and non-English text, " -"such as Russian or Korean, will most likely be messed up completely. Continue " -"anyway?" +"such as Russian or Korean, will most likely be messed up completely. " +"Continue anyway?" msgstr "" -"此功能搜尋 DVI 檔中的純文字內容。很可惜，本版的 KDVI 只能正確處理純 ASCII " -"字元。符號、連體字、數理式子、重音符號及非英文語系文字，例如俄文或韓文，將會完全變成一團亂。要繼續嗎？" +"此功能搜尋 DVI 檔中的純文字內容。很可惜，本版的 KDVI 只能正確處理純 " +"ASCII 字元。符號、連體字、數理式子、重音符號及非英文語系文字，例如俄文或韓" +"文，將會完全變成一團亂。要繼續嗎？" #: kdvi_multipage.cpp:469 kdvi_multipage_texthandling.cpp:64 msgid "Function May Not Work as Expected" @@ -784,7 +814,8 @@ msgid "" "such as Russian or Korean, will most likely be messed up completely." msgstr "" "此功能會將 DVI 檔轉為純文字檔。很可惜，本版的 KDVI 只能正確處理純 ASCII " -"字元。符號、連體字、數理式子、重音符號及非英文語系文字，例如俄文或韓文，將會完全變成一團亂。" +"字元。符號、連體字、數理式子、重音符號及非英文語系文字，例如俄文或韓文，將會" +"完全變成一團亂。" #: kdvi_multipage_texthandling.cpp:65 msgid "Continue Anyway" @@ -794,7 +825,9 @@ msgstr "請繼續" msgid "" "Check if the file is loaded in another KDVI.\n" "If it is, bring up the other KDVI. Otherwise, load the file." -msgstr "請檢查是否此檔已被其他 KDVI 實體載入。如果是的話，請叫出該實體，否則請載入檔案。" +msgstr "" +"請檢查是否此檔已被其他 KDVI 實體載入。如果是的話，請叫出該實體，否則請載入檔" +"案。" #: main.cpp:23 msgid "Navigate to this page" @@ -806,8 +839,8 @@ msgstr "要載入的檔案" #: main.cpp:37 msgid "" -"This program displays Device Independent (DVI) files which are produced by the " -"TeX typesetting system.\n" +"This program displays Device Independent (DVI) files which are produced by " +"the TeX typesetting system.\n" "This KDVI version is based on original code from KDVI version 0.43 and xdvik." msgstr "" "這個程式會顯示 DVI 檔，由 Tex 系統套件產生。\n" @@ -819,8 +852,8 @@ msgstr "網址 %1 格式不太正確。" #: main.cpp:86 msgid "" -"The URL %1 does not point to a local file. You can only specify local files if " -"you are using the '--unique' option." +"The URL %1 does not point to a local file. You can only specify local files " +"if you are using the '--unique' option." msgstr "網址 %1 不是本地端檔案。您使用 --unique 選項時只能指定本地端檔案。" #: optionDialogFontsWidget.cpp:34 @@ -834,8 +867,8 @@ msgid "" "either install the FreeType library and recompile KDVI yourself, or find a " "precompiled software package for your operating system." msgstr "" -"KDVI 需要 FreeType 來存取 type 1 字型。KDVI 編譯時並沒有編入 FreeType。如果您要使用 type 1 字型，您需重編譯 " -"KDVI，或找尋已編譯好的可執行檔。" +"KDVI 需要 FreeType 來存取 type 1 字型。KDVI 編譯時並沒有編入 FreeType。如果您" +"要使用 type 1 字型，您需重編譯 KDVI，或找尋已編譯好的可執行檔。" #: optionDialogSpecialWidget.cpp:32 msgid "User-Defined Editor" @@ -876,232 +909,40 @@ msgstr "產生 PostScript 圖檔......" #: psgs.cpp:250 msgid "" "The version of Ghostview that is installed on this computer does not " -"contain any of the Ghostview device drivers that are known to KDVI. PostScript " -"support has therefore been turned off in KDVI." +"contain any of the Ghostview device drivers that are known to KDVI. " +"PostScript support has therefore been turned off in KDVI." msgstr "" -"安裝在此電腦上的 Ghostview 的版本不含任何 KDVI 能辨識的 Ghostview 裝置驅動程式。PostScript " -"支援將被關閉。" +"安裝在此電腦上的 Ghostview 的版本不含任何 KDVI 能辨識的 Ghostview 裝置驅" +"動程式。PostScript 支援將被關閉。" #: psgs.cpp:253 msgid "" -"" -"

The Ghostview program, which KDVI uses internally to display the PostScript " -"graphics that is included in this DVI file, is generally able to write its " -"output in a variety of formats. The sub-programs that Ghostview uses for these " -"tasks are called 'device drivers'; there is one device driver for each format " -"that Ghostview is able to write. Different versions of Ghostview often have " -"different sets of device drivers available. It seems that the version of " -"Ghostview that is installed on this computer does not contain " -"any of the device drivers that are known to KDVI.

" -"

It seems unlikely that a regular installation of Ghostview would not contain " -"these drivers. This error may therefore point to a serious misconfiguration of " -"the Ghostview installation on your computer.

" -"

If you want to fix the problems with Ghostview, you can use the command " -"gs --help to display the list of device drivers contained in " -"Ghostview. Among others, KDVI can use the 'png256', 'jpeg' and 'pnm' drivers. " -"Note that KDVI needs to be restarted to re-enable PostScript support.

" -msgstr "" -" " -"

KDVI 內部用以顯示此 DVI 檔中的 PostScript 圖形的 GhostView 程式，可以將它的輸出寫程不同的格式。Ghostview " -"使用的子程式稱為「裝置驅動程式」，每一種輸出格式都有自己的裝置驅動程式，不同版本的 Ghostview 也會提供不同的裝置驅動程式。看起來安裝在此電腦上的 " -"Ghostview 版本並沒有支援 任何 KDVI 能辨識的裝置驅動程式。

" -"

看起來您安裝的 Ghostview 可能不是很正常。也有可能是 Ghostview 在安裝時設定不正確。

" -"

如果您要修正此問題，您可以在命令列下使用 gs --help 顯示裝置驅動程式清單。此外 KDVI 還可以使用 " -"png256、jpeg 與 pnm 驅動程式。注意，KDVI 需要重新啟動才能重新開啟 PostScript 支援。

" - -#. i18n: file kdvi_part.rc line 6 -#: rc.cpp:6 -#, no-c-format -msgid "Export As" -msgstr "輸出為" - -#. i18n: file optionDialogFontsWidget_base.ui line 28 -#: rc.cpp:18 -#, no-c-format -msgid "Use font hinting for Type 1 fonts, if available" -msgstr "如果存在的話，使用 Type 1 字型提示(hinting)" - -#. i18n: file optionDialogFontsWidget_base.ui line 31 -#: rc.cpp:21 -#, no-c-format -msgid "" -"You should enable this, if the use of font hinting improves readability on your " -"machine." -msgstr "如果字型提示可增進可讀性，那你可以試著開啟此選項。" - -#. i18n: file optionDialogFontsWidget_base.ui line 34 -#: rc.cpp:24 -#, no-c-format -msgid "" -"Many modern fonts contain \"font hinting\" information which can be used to " -"improve the appearance of a font on low-resolution displays, such as a computer " -"monitor, or a notebook screen. However, many people find the \"improved\" fonts " -"quite ugly and prefer to have this option disabled." -msgstr "" -"目前的許多字型都含有 \"字型提示\" （font hinting）資訊，這在低解析度的螢幕可增進可讀性。但有不少朋友發現這種 \"改進\" " -"很醜，這時可能需要把這個選項關掉。" - -#. i18n: file optionDialogSpecialWidget_base.ui line 27 -#: rc.cpp:27 -#, no-c-format -msgid "Show PostScript specials" -msgstr "顯示特殊 PostScript" - -#. i18n: file optionDialogSpecialWidget_base.ui line 30 -#: rc.cpp:30 -#, no-c-format -msgid "If in doubt, enable this option." -msgstr "如果不知道要不要打開，就打開此選項吧！" - -#. i18n: file optionDialogSpecialWidget_base.ui line 33 -#: rc.cpp:33 rc.cpp:83 -#, no-c-format -msgid "" -"Some DVI files contain PostScript graphics. If enabled, KDVI will use the " -"Ghostview PostScript interpreter to display these. You probably want to enable " -"this option, unless you have a DVI-file whose PostScript part is broken, or too " -"large for your machine." -msgstr "" -"有些 DVI 檔含有 PostScript 圖形。如果打開這個功能，KDVI 會使用 ghostview 的 PostScript " -"解譯器來顯示這些圖形。您可能得打開這個功能，除非您的 DVI 檔的 PostScript 圖形毀損，或圖形太大您的系統無法處理。" - -#. i18n: file optionDialogSpecialWidget_base.ui line 41 -#: rc.cpp:36 -#, no-c-format -msgid "Editor for Inverse Search" -msgstr "反向搜尋用編輯器" - -#. i18n: file optionDialogSpecialWidget_base.ui line 60 -#: rc.cpp:39 -#, no-c-format -msgid "Choose an editor which is used in inverse search." -msgstr "選擇一個反向搜尋時用的編輯器。" - -#. i18n: file optionDialogSpecialWidget_base.ui line 64 -#: rc.cpp:42 -#, no-c-format -msgid "" -"

Some DVI files contain 'inverse search' information. If such a DVI file is " -"loaded, you can right-click into KDVI and an editor will open, load the TeX " -"file and jump to the correct position. You can select your favorite editor " -"here. If in doubt, 'nedit' is usually a good choice.

\n" -"

Check the KDVI manual to see how to prepare DVI files which support the " -"inverse search.

" -msgstr "" -"

有些 DVI 檔含有反向搜尋的資訊。如果載入此種 DVI 檔，您可以按滑鼠右鍵來打開編輯器，載入 TeX " -"文稿，並跳至相對應的位置。在此您可以選擇自己喜愛的編輯器。如果有疑問，'nedit' 常是好的選擇。

\n" -"

查閱 KDVI 的使用手冊，如何讓有反向搜尋的 DVI 檔作用。

" - -#. i18n: file optionDialogSpecialWidget_base.ui line 80 -#: rc.cpp:46 -#, no-c-format -msgid "Description:" -msgstr "描述：" - -#. i18n: file optionDialogSpecialWidget_base.ui line 96 -#: rc.cpp:49 -#, no-c-format -msgid "Shell command:" -msgstr "命令列指令：" - -#. i18n: file optionDialogSpecialWidget_base.ui line 115 -#: rc.cpp:52 -#, no-c-format -msgid "" -"Explains about the editor's capabilities in conjunction with inverse search." -msgstr "說明編輯器對反向搜尋結合的能力。" - -#. i18n: file optionDialogSpecialWidget_base.ui line 119 -#: rc.cpp:55 -#, fuzzy, no-c-format -msgid "" -"

Not all editors are well suited for inverse search. For instance, many " -"editors have no command like 'If the file is not yet loaded, load it. " -"Otherwise, bring the window with the file to the front'. If you are using an " -"editor like this, clicking into the DVI file will always open a new editor, " -"even if the TeX file is already open. Likewise, many editors have no command " -"line argument that would allow KDVI to specify the exact line which you wish to " -"edit.

\n" -"

If you feel that KDVI's support for a certain editor is inadequate, please " -"contact the Trinity developers at www.trinitydesktop.org.

" -msgstr "" -"

並非所有編輯器都適合做反向搜尋。例如，許多編輯器並無「若檔案尚未載入則載入檔案，否則將檔案視窗移至前景」的功能。如果您的編輯器沒有此功能，在 DVI " -"檔按一下滑鼠，即使 TeX 已經打開，還是會開啟一個新的編輯器。此外，有許多編輯器並無命令列參數供 KDVI 去指定特定行。

\n" -"

如果您覺得 KDVI 對某些編輯器支援不完整，請寫信給 kebekus@kde.org。

" - -#. i18n: file optionDialogSpecialWidget_base.ui line 135 -#: rc.cpp:59 -#, no-c-format -msgid "Shell-command line used to start the editor." -msgstr "開啟編輯器的命令列指令。" - -#. i18n: file optionDialogSpecialWidget_base.ui line 138 -#: rc.cpp:62 -#, no-c-format -msgid "" -"If you are using inverse search, KDVI uses this command line to start the " -"editor. The field '%f' is replaced with the filename, and '%l' is replaced with " -"the line number." -msgstr "如果您使用反向搜尋，KDVI 使用這個命令列去啟動編輯器。'%f' 欄位會被檔名取代，而且 '%l' 會被行數取代。" - -#. i18n: file optionDialogSpecialWidget_base.ui line 154 -#: rc.cpp:65 -#, no-c-format -msgid "Editor:" -msgstr "編輯器：" - -#. i18n: file optionDialogSpecialWidget_base.ui line 170 -#: rc.cpp:68 -#, no-c-format -msgid "What is 'inverse search'? " -msgstr "什麼是 '反向搜尋'？" - -#. i18n: file optionDialogSpecialWidget_base.ui line 176 -#: rc.cpp:71 -#, no-c-format -msgid "inv-search" -msgstr "反向搜尋" - -#. i18n: file kdvi.kcfg line 10 -#: rc.cpp:74 -#, no-c-format -msgid "" -"Use MetaFont to generate missing fonts. If in doubt, enable this option." -msgstr "使用 MetaFont 來產生找不到的字型。如果不知道要不要打開，就打開吧。" - -#. i18n: file kdvi.kcfg line 11 -#: rc.cpp:77 -#, no-c-format -msgid "" -"Allows KDVI to use MetaFont to produce bitmap fonts. Unless you have a very " -"specific reason, you probably want to enable this option." -msgstr "允許 KDVI 使用 MetaFont 來產生點陣字。除非您有很特殊的理由，否則您最好是打開。" - -#. i18n: file kdvi.kcfg line 15 -#: rc.cpp:80 -#, no-c-format -msgid "Show PostScript specials. If in doubt, enable this option." -msgstr "顯示 PostScript 特性。如果您不知道要不要打開，就打開吧。" - -#. i18n: file kdvi.kcfg line 20 -#: rc.cpp:86 -#, no-c-format -msgid "" -"Use font hinting. You should enable this, if the use of font hinting improves " -"readability on your machine." -msgstr "使用字型提示（font hinting）。如果使用字型提示可增進可讀性，那你可以試試看。" - -#. i18n: file kdvi.kcfg line 21 -#: rc.cpp:89 -#, no-c-format -msgid "" -"Many modern fonts contain "font hinting" information which can be " -"used to improve the appearance of a font on low-resolution displays, such as a " -"computer monitor, or a notebook screen. However, many people find the " -""improved" fonts quite ugly and prefer to have this option disabled." +"

The Ghostview program, which KDVI uses internally to display the " +"PostScript graphics that is included in this DVI file, is generally able to " +"write its output in a variety of formats. The sub-programs that Ghostview " +"uses for these tasks are called 'device drivers'; there is one device driver " +"for each format that Ghostview is able to write. Different versions of " +"Ghostview often have different sets of device drivers available. It seems " +"that the version of Ghostview that is installed on this computer does not " +"contain any of the device drivers that are known to KDVI.

It seems unlikely that a regular installation of Ghostview would not " +"contain these drivers. This error may therefore point to a serious " +"misconfiguration of the Ghostview installation on your computer.

If " +"you want to fix the problems with Ghostview, you can use the command " +"gs --help to display the list of device drivers contained " +"in Ghostview. Among others, KDVI can use the 'png256', 'jpeg' and 'pnm' " +"drivers. Note that KDVI needs to be restarted to re-enable PostScript " +"support.

" msgstr "" -"目前的許多字型都含有「字型提示」（font " -"hinting）資訊，這在低解析度的螢幕可增進可讀性。但有不少朋友發現這種「改進」很醜，這時可能需要把這個選項關掉。" +"

KDVI 內部用以顯示此 DVI 檔中的 PostScript 圖形的 GhostView 程式，可以" +"將它的輸出寫程不同的格式。Ghostview 使用的子程式稱為「裝置驅動程式」，每一種" +"輸出格式都有自己的裝置驅動程式，不同版本的 Ghostview 也會提供不同的裝置驅動程" +"式。看起來安裝在此電腦上的 Ghostview 版本並沒有支援 任何 " +"KDVI 能辨識的裝置驅動程式。

看起來您安裝的 Ghostview 可能不是很正常。" +"也有可能是 Ghostview 在安裝時設定不正確。

如果您要修正此問題，您可以在" +"命令列下使用 gs --help 顯示裝置驅動程式清單。此外 KDVI 還可" +"以使用 png256、jpeg 與 pnm 驅動程式。注意，KDVI 需要重新啟動才能重新開啟 " +"PostScript 支援。

" #: special.cpp:39 msgid "That makes 25 errors. Further error messages will not be printed." @@ -1109,8 +950,8 @@ msgstr "已產生 25 個錯誤，進一步的錯誤訊息將不再顯示。" #: special.cpp:224 msgid "" -"Error in DVIfile '%1', page %2. Color pop command issued when the color stack " -"is empty." +"Error in DVIfile '%1', page %2. Color pop command issued when the color " +"stack is empty." msgstr "DVI 檔 '%1'，頁 %2 錯誤。顏色堆疊錯誤。" #: special.cpp:309 @@ -1201,13 +1042,211 @@ msgstr " 忽略" msgid "Wrong command byte found in VF macro list: %1" msgstr "在 VF 巨集列表中找到錯誤的命令位元組: %1" -#: tips.txt:3 +#: kdvi.kcfg:10 +#, no-c-format msgid "" -"

...that KDVI can also load compressed DVI-files? \n" +"Use MetaFont to generate missing fonts. If in doubt, enable this option." +msgstr "使用 MetaFont 來產生找不到的字型。如果不知道要不要打開，就打開吧。" + +#: kdvi.kcfg:11 +#, no-c-format +msgid "" +"Allows KDVI to use MetaFont to produce bitmap fonts. Unless you have a very " +"specific reason, you probably want to enable this option." msgstr "" -"

......KDVI 可以載入壓縮過的 DVI 檔嗎？\n" +"允許 KDVI 使用 MetaFont 來產生點陣字。除非您有很特殊的理由，否則您最好是打" +"開。" -#: tips.txt:8 +#: kdvi.kcfg:15 +#, no-c-format +msgid "Show PostScript specials. If in doubt, enable this option." +msgstr "顯示 PostScript 特性。如果您不知道要不要打開，就打開吧。" + +#: kdvi.kcfg:16 optionDialogSpecialWidget_base.ui:33 +#, no-c-format +msgid "" +"Some DVI files contain PostScript graphics. If enabled, KDVI will use the " +"Ghostview PostScript interpreter to display these. You probably want to " +"enable this option, unless you have a DVI-file whose PostScript part is " +"broken, or too large for your machine." +msgstr "" +"有些 DVI 檔含有 PostScript 圖形。如果打開這個功能，KDVI 會使用 ghostview 的 " +"PostScript 解譯器來顯示這些圖形。您可能得打開這個功能，除非您的 DVI 檔的 " +"PostScript 圖形毀損，或圖形太大您的系統無法處理。" + +#: kdvi.kcfg:20 +#, no-c-format +msgid "" +"Use font hinting. You should enable this, if the use of font hinting " +"improves readability on your machine." +msgstr "" +"使用字型提示（font hinting）。如果使用字型提示可增進可讀性，那你可以試試看。" + +#: kdvi.kcfg:21 +#, no-c-format +msgid "" +"Many modern fonts contain "font hinting" information which can be " +"used to improve the appearance of a font on low-resolution displays, such as " +"a computer monitor, or a notebook screen. However, many people find the " +""improved" fonts quite ugly and prefer to have this option " +"disabled." +msgstr "" +"目前的許多字型都含有「字型提示」（font hinting）資訊，這在低解析度的螢幕可增" +"進可讀性。但有不少朋友發現這種「改進」很醜，這時可能需要把這個選項關掉。" + +#: kdvi_part.rc:4 +#, fuzzy, no-c-format +msgid "&File" +msgstr "DVI 檔案" + +#: kdvi_part.rc:6 +#, no-c-format +msgid "Export As" +msgstr "輸出為" + +#: kdvi_part.rc:12 +#, fuzzy, no-c-format +msgid "&Edit" +msgstr "編輯器：" + +#: kdvi_part.rc:17 +#, no-c-format +msgid "&Settings" +msgstr "" + +#: kdvi_part.rc:21 +#, no-c-format +msgid "&Help" +msgstr "" + +#: optionDialogFontsWidget_base.ui:28 +#, no-c-format +msgid "Use font hinting for Type 1 fonts, if available" +msgstr "如果存在的話，使用 Type 1 字型提示(hinting)" + +#: optionDialogFontsWidget_base.ui:31 +#, no-c-format +msgid "" +"You should enable this, if the use of font hinting improves readability on " +"your machine." +msgstr "如果字型提示可增進可讀性，那你可以試著開啟此選項。" + +#: optionDialogFontsWidget_base.ui:34 +#, no-c-format +msgid "" +"Many modern fonts contain \"font hinting\" information which can be used to " +"improve the appearance of a font on low-resolution displays, such as a " +"computer monitor, or a notebook screen. However, many people find the " +"\"improved\" fonts quite ugly and prefer to have this option disabled." +msgstr "" +"目前的許多字型都含有 \"字型提示\" （font hinting）資訊，這在低解析度的螢幕可" +"增進可讀性。但有不少朋友發現這種 \"改進\" 很醜，這時可能需要把這個選項關掉。" + +#: optionDialogSpecialWidget_base.ui:27 +#, no-c-format +msgid "Show PostScript specials" +msgstr "顯示特殊 PostScript" + +#: optionDialogSpecialWidget_base.ui:30 +#, no-c-format +msgid "If in doubt, enable this option." +msgstr "如果不知道要不要打開，就打開此選項吧！" + +#: optionDialogSpecialWidget_base.ui:41 +#, no-c-format +msgid "Editor for Inverse Search" +msgstr "反向搜尋用編輯器" + +#: optionDialogSpecialWidget_base.ui:60 +#, no-c-format +msgid "Choose an editor which is used in inverse search." +msgstr "選擇一個反向搜尋時用的編輯器。" + +#: optionDialogSpecialWidget_base.ui:63 +#, no-c-format +msgid "" +"

Some DVI files contain 'inverse search' information. If such a DVI file " +"is loaded, you can right-click into KDVI and an editor will open, load the " +"TeX file and jump to the correct position. You can select your favorite " +"editor here. If in doubt, 'nedit' is usually a good choice.

\n" +"

Check the KDVI manual to see how to prepare DVI files which support the " +"inverse search.

" +msgstr "" +"

有些 DVI 檔含有反向搜尋的資訊。如果載入此種 DVI 檔，您可以按滑鼠右鍵來打開" +"編輯器，載入 TeX 文稿，並跳至相對應的位置。在此您可以選擇自己喜愛的編輯器。如" +"果有疑問，'nedit' 常是好的選擇。

\n" +"

查閱 KDVI 的使用手冊，如何讓有反向搜尋的 DVI 檔作用。

" + +#: optionDialogSpecialWidget_base.ui:80 +#, no-c-format +msgid "Description:" +msgstr "描述：" + +#: optionDialogSpecialWidget_base.ui:96 +#, no-c-format +msgid "Shell command:" +msgstr "命令列指令：" + +#: optionDialogSpecialWidget_base.ui:115 +#, no-c-format +msgid "" +"Explains about the editor's capabilities in conjunction with inverse search." +msgstr "說明編輯器對反向搜尋結合的能力。" + +#: optionDialogSpecialWidget_base.ui:118 +#, fuzzy, no-c-format +msgid "" +"

Not all editors are well suited for inverse search. For instance, many " +"editors have no command like 'If the file is not yet loaded, load it. " +"Otherwise, bring the window with the file to the front'. If you are using an " +"editor like this, clicking into the DVI file will always open a new editor, " +"even if the TeX file is already open. Likewise, many editors have no command " +"line argument that would allow KDVI to specify the exact line which you wish " +"to edit.

\n" +"

If you feel that KDVI's support for a certain editor is inadequate, " +"please contact the Trinity developers at www.trinitydesktop.org.

" +msgstr "" +"

並非所有編輯器都適合做反向搜尋。例如，許多編輯器並無「若檔案尚未載入則載入" +"檔案，否則將檔案視窗移至前景」的功能。如果您的編輯器沒有此功能，在 DVI 檔按一" +"下滑鼠，即使 TeX 已經打開，還是會開啟一個新的編輯器。此外，有許多編輯器並無命" +"令列參數供 KDVI 去指定特定行。

\n" +"

如果您覺得 KDVI 對某些編輯器支援不完整，請寫信給 kebekus@kde.org。

" + +#: optionDialogSpecialWidget_base.ui:135 +#, no-c-format +msgid "Shell-command line used to start the editor." +msgstr "開啟編輯器的命令列指令。" + +#: optionDialogSpecialWidget_base.ui:138 +#, no-c-format +msgid "" +"If you are using inverse search, KDVI uses this command line to start the " +"editor. The field '%f' is replaced with the filename, and '%l' is replaced " +"with the line number." +msgstr "" +"如果您使用反向搜尋，KDVI 使用這個命令列去啟動編輯器。'%f' 欄位會被檔名取代，" +"而且 '%l' 會被行數取代。" + +#: optionDialogSpecialWidget_base.ui:154 +#, no-c-format +msgid "Editor:" +msgstr "編輯器：" + +#: optionDialogSpecialWidget_base.ui:170 +#, no-c-format +msgid "What is 'inverse search'? " +msgstr "什麼是 '反向搜尋'？" + +#: optionDialogSpecialWidget_base.ui:176 +#, no-c-format +msgid "inv-search" +msgstr "反向搜尋" + +#: tips:3 +msgid "

...that KDVI can also load compressed DVI-files? \n" +msgstr "

......KDVI 可以載入壓縮過的 DVI 檔嗎？\n" + +#: tips:9 msgid "" "

...that you can mark text with the right mouse button and paste it\n" "into any application?\n" @@ -1215,9 +1254,10 @@ msgstr "" "

......您可以使用滑鼠右鍵使文字內容反白，並貼\n" "至其他的應用軟體中？\n" -#: tips.txt:14 +#: tips:16 msgid "" -"

...that KDVI now supports inverse search? You can click into your DVI file \n" +"

...that KDVI now supports inverse search? You can click into your DVI " +"file \n" "with the middle mouse button and your editor opens, loads the TeX file, and\n" "jumps to the proper line! The \n" "manual explains how to set up your editor for this. \n" @@ -1227,11 +1267,13 @@ msgstr "" "並跳至相對的編輯行！ \n" "使用手冊會說明如何設定編輯器達成此種功能。 \n" -#: tips.txt:22 +#: tips:25 msgid "" -"

...that KDVI supports forward search? If you use Emacs or XEmacs, you can \n" +"

...that KDVI supports forward search? If you use Emacs or XEmacs, you " +"can \n" "jump directly from the TeX file to the associated place in the DVI file. \n" -"The manual explains how to set up \n" +"The manual explains how to set " +"up \n" "your editor for this. \n" msgstr "" "

......KDVI 支援往前搜尋？如果您使用 Emacs 或 XEmacs，您可以\n" @@ -1239,15 +1281,12 @@ msgstr "" " 使用手冊會說明如何\n" "設定編輯器達成此種功能。 \n" -#: tips.txt:30 -msgid "" -"

...that KDVI now offers full text search? \n" -msgstr "" -"

......KDVI 可以全文搜尋？\n" +#: tips:34 +msgid "

...that KDVI now offers full text search? \n" +msgstr "

......KDVI 可以全文搜尋？\n" -#: tips.txt:35 +#: tips:40 msgid "" -"

...that KDVI can save your DVI file as PostScript, PDF, and even plain text? " -"\n" -msgstr "" -"

......KDVI 可以把 DVI 檔存成 PostScript，PDF 甚至純文字檔？\n" +"

...that KDVI can save your DVI file as PostScript, PDF, and even plain " +"text? \n" +msgstr "

......KDVI 可以把 DVI 檔存成 PostScript，PDF 甚至純文字檔？\n" -- cgit v1.2.1