From bfcee369b06e37bfe52dcddf91a212e79f000595 Mon Sep 17 00:00:00 2001
From: TDE Weblate <weblate@mirror.git.trinitydesktop.org>
Date: Wed, 26 Dec 2018 11:43:31 +0000
Subject: Update translation files

Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.

Translation: tdeutils/khexedit
Translate-URL: https://mirror.git.trinitydesktop.org/weblate/projects/tdeutils/khexedit/
---
 tde-i18n-zh_TW/messages/tdeutils/khexedit.po | 2718 +++++++++++++-------------
 1 file changed, 1399 insertions(+), 1319 deletions(-)

(limited to 'tde-i18n-zh_TW')

diff --git a/tde-i18n-zh_TW/messages/tdeutils/khexedit.po b/tde-i18n-zh_TW/messages/tdeutils/khexedit.po
index c0f6326a2e2..661be598723 100644
--- a/tde-i18n-zh_TW/messages/tdeutils/khexedit.po
+++ b/tde-i18n-zh_TW/messages/tdeutils/khexedit.po
@@ -8,7 +8,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: khexedit\n"
-"POT-Creation-Date: 2014-09-29 12:06-0500\n"
+"POT-Creation-Date: 2018-12-25 18:10+0100\n"
 "PO-Revision-Date: 2006-02-10 11:52+0800\n"
 "Last-Translator: Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv "
 "dot tw>\n"
@@ -19,1308 +19,1247 @@ msgstr ""
 "Content-Transfer-Encoding: 8bit\n"
 "X-Generator: KBabel 1.10.2\n"
 
-#. i18n: file khexeditui.rc line 10
-#: rc.cpp:3
-#, no-c-format
-msgid "Permissions"
-msgstr "權限"
-
-#. i18n: file khexeditui.rc line 19
-#: rc.cpp:6
-#, no-c-format
-msgid "Spec&ial"
-msgstr "特殊(&I)"
-
-#. i18n: file khexeditui.rc line 42
-#: rc.cpp:9
-#, no-c-format
-msgid "Document &Encoding"
-msgstr "文件編碼方式(&E)"
-
-#. i18n: file khexeditui.rc line 67
-#: rc.cpp:12
-#, no-c-format
-msgid "&Documents"
-msgstr "文件(&D)"
-
-#. i18n: file khexeditui.rc line 73
-#: rc.cpp:15
-#, no-c-format
-msgid "&Document Tabs"
-msgstr "文件定位(&D)"
+#: _translatorinfo:1
+msgid ""
+"_: NAME OF TRANSLATORS\n"
+"Your names"
+msgstr "Jing-Jong Shyue, Yaun-Chen Cheng"
 
-#. i18n: file khexeditui.rc line 78
-#: rc.cpp:18
-#, no-c-format
-msgid "Conversion &Field"
-msgstr "轉換區域(&F)"
+#: _translatorinfo:2
+msgid ""
+"_: EMAIL OF TRANSLATORS\n"
+"Your emails"
+msgstr "shyue@sonoma.com.tw, ycheng@sinica.edu.tw"
 
-#. i18n: file khexeditui.rc line 83
-#: rc.cpp:21
-#, no-c-format
-msgid "Searc&hbar"
-msgstr "搜尋列(&H)"
+#: chartabledialog.cc:37
+msgid "Character Table"
+msgstr "字元表"
 
-#: statusbarprogress.cc:268
-msgid "%1... %2 of %3"
-msgstr "%1... %2 之 %3"
+#: chartabledialog.cc:49 dialog.cc:1402 fileinfodialog.cc:106
+msgid "Decimal"
+msgstr "十進位"
 
-#: statusbarprogress.cc:272
-msgid "%1... %2%"
-msgstr "%1... %2%"
+#: chartabledialog.cc:50 dialog.cc:1401 fileinfodialog.cc:105
+msgid "Hexadecimal"
+msgstr "十六進位"
 
-#: main.cc:34
-msgid "TDE hex editor"
-msgstr "TDE 十六進位編輯器"
+#: chartabledialog.cc:51 dialog.cc:1403 fileinfodialog.cc:107
+msgid "Octal"
+msgstr "八進位"
 
-#: main.cc:40
-msgid "Jump to 'offset'"
-msgstr "跳到 '位移'"
+#: chartabledialog.cc:52 dialog.cc:1404 fileinfodialog.cc:108
+msgid "Binary"
+msgstr "二進位"
 
-#: main.cc:41
-msgid "File(s) to open"
-msgstr "要開啟的檔案"
+#: chartabledialog.cc:53 fileinfodialog.cc:109
+msgid "Text"
+msgstr "純文字"
 
-#: main.cc:49
-msgid "KHexEdit"
-msgstr "KHexEdit"
+#: chartabledialog.cc:70
+msgid "Insert this number of characters:"
+msgstr "插入這個邊號的字元:"
 
-#: main.cc:54
+#: conversion.cc:48
 msgid ""
-"\n"
-"This program uses modified code and techniques from other TDE programs,\n"
-"specifically kwrite, tdeiconedit and ksysv. Credit goes to authors\n"
-"and maintainers.\n"
-"\n"
-"Leon Lessing, leon@lrlabs.com, has made parts of the bit swapping\n"
-"functionality.\n"
-"\n"
-"Craig Graham, c_graham@hinge.mistral.co.uk, has made parts of\n"
-"the bit stream functionality of the conversion field.\n"
-"\n"
-"Dima Rogozin, dima@mercury.co.il, has extended the string dialog\n"
-"list capabilities.\n"
-"\n"
-"Edward Livingston-Blade, sbcs@bigfoot.com, has given me very good\n"
-"reports which removed some nasty bugs.\n"
-msgstr ""
-"\n"
-"這個程式使用了存其他 TDE 程式改來的程式碼,\n"
-"尤其是 kwrite, tdeiconedit 與 ksysv. \n"
-"著作屬於作者與維護者.\n"
-"\n"
-"Leon Lessing, leon@lrlabs.com, has made parts of the bit swapping\n"
-"functionality.\n"
-"\n"
-"Craig Graham, c_graham@hinge.mistral.co.uk, has made parts of\n"
-"the bit stream functionality of the conversion field.\n"
-"\n"
-"Dima Rogozin, dima@mercury.co.il, has extended the string dialog\n"
-"list capabilities.\n"
-"\n"
-"Edward Livingston-Blade, sbcs@bigfoot.com, has given me very good\n"
-"reports which removed some nasty bugs.\n"
-
-#: hexeditorwidget.cc:583
-#, c-format
-msgid "Untitled %1"
-msgstr "未命名 %1"
-
-#: hexeditorwidget.cc:607
-msgid "Unable to create new document."
-msgstr "無法建立新文件."
+"_: Default encoding\n"
+"Default"
+msgstr "預設值"
 
-#: hexeditorwidget.cc:608
-msgid "Operation Failed"
-msgstr "操作失敗"
+#: conversion.cc:49
+msgid "EBCDIC"
+msgstr "EBCDIC"
 
-#: hexeditorwidget.cc:770
-msgid "Insert File"
-msgstr "插入檔案"
+#: conversion.cc:50
+msgid "US-ASCII (7 bit)"
+msgstr "US-ASCII (7 位元)"
 
-#: hexeditorwidget.cc:780
-msgid "Only local files are currently supported."
-msgstr "目前僅支援本地端檔案."
+#: conversion.cc:51
+msgid "Unknown"
+msgstr "未知"
 
-#: hexeditorwidget.cc:868
-msgid ""
-"The current document has been modified.\n"
-"Do you want to save it?"
-msgstr ""
-"目前的檔案已經被修改.\n"
-"要儲存嗎?"
+#: converterdialog.cc:71
+msgid "Converter"
+msgstr "轉換器"
 
-#: hexeditorwidget.cc:933
-msgid ""
-"Current document has been changed on disk.\n"
-"If you save now, those changes will be lost.\n"
-"Proceed?"
-msgstr ""
-"磁碟上的檔案已經變更.\n"
-"如果您儲存, 那些變更將會失去.\n"
-"是否執行?"
+#: converterdialog.cc:72
+msgid "&On Cursor"
+msgstr "在游標(&O)"
 
-#: hexeditorwidget.cc:986
-msgid ""
-"A document with this name already exists.\n"
-"Do you want to overwrite it?"
-msgstr ""
-"相同檔名的檔案已經存在.\n"
-"要蓋寫嗎?"
+#: converterdialog.cc:81 hextoolwidget.cc:56
+msgid "Hexadecimal:"
+msgstr "十六進位:"
 
-#: dialog.cc:1328 hexeditorwidget.cc:990
-msgid "Overwrite"
-msgstr "覆寫"
+#: converterdialog.cc:83
+msgid "Decimal:"
+msgstr "十進位"
 
-#: hexeditorwidget.cc:1023
-msgid "The current document does not exist on the disk."
-msgstr "目前的檔案不存在磁碟上."
+#: converterdialog.cc:85 hextoolwidget.cc:56
+msgid "Octal:"
+msgstr "八進位:"
 
-#: hexeditorwidget.cc:1033
-msgid ""
-"The current document has changed on the disk and also contains unsaved "
-"modifications.\n"
-"If you reload now, the modifications will be lost."
-msgstr ""
-"磁碟上的檔案已經變更, 且含了未儲存的變更.\n"
-"如果您現在重新載入，變更會遺失掉。"
+#: converterdialog.cc:87 hextoolwidget.cc:57
+msgid "Binary:"
+msgstr "二進位:"
 
-#: hexeditorwidget.cc:1039
-msgid ""
-"The current document contains unsaved modifications.\n"
-"If you reload now, the modifications will be lost."
-msgstr "視窗內有未儲存但變更過的文件。如果您重新載入，所有的變更將會消失。"
+#: converterdialog.cc:89 hextoolwidget.cc:57
+msgid "Text:"
+msgstr "純文字:"
 
-#: hexeditorwidget.cc:1073
-msgid "Print Hex-Document"
-msgstr "列印十六進位文件"
+#: dialog.cc:44
+msgid "Goto Offset"
+msgstr "跳到位移"
 
-#: hexeditorwidget.cc:1123
-msgid ""
-"Could not print data.\n"
-msgstr ""
-"不能列印資料.\n"
+#: dialog.cc:60
+msgid "O&ffset:"
+msgstr "位移(&F):"
 
-#: hexeditorwidget.cc:1147
-#, c-format
-msgid ""
-"_n: <qt>Print threshold exceeded."
-"<br>You are about to print one page."
-"<br>Proceed?</qt>\n"
-"<qt>Print threshold exceeded."
-"<br>You are about to print %n pages."
-"<br>Proceed?</qt>"
-msgstr "<qt>超過印表機處理能力。<br>您將印出約 %n 頁。<br>是否執行?</qt>"
+#: dialog.cc:66 dialog.cc:215 dialog.cc:557 dialog.cc:803 dialog.cc:1133
+#: exportdialog.cc:41
+#, fuzzy
+msgid "Options"
+msgstr "操作(&P):"
 
-#: hexeditorwidget.cc:1192 hexeditorwidget.cc:1209 hexeditorwidget.cc:1226
-msgid ""
-"Unable to export data.\n"
-msgstr ""
-"無法匯出資料.\n"
+#: dialog.cc:73 dialog.cc:223 dialog.cc:564 dialog.cc:810
+msgid "&From cursor"
+msgstr "從游標(&F)"
 
-#: hexeditorwidget.cc:1237
-msgid ""
-"The encoding you have selected is not reversible.\n"
-"If you revert to the original encoding later, there is no guarantee that the "
-"data can be restored to the original state."
-msgstr ""
-"您所選擇的編碼方式是不可逆的.\n"
-"如果你稍後選擇原來的編碼，我們無法保證您日後還能回復原先的狀態。"
+#: dialog.cc:75 dialog.cc:225 dialog.cc:566 dialog.cc:812
+msgid "&Backwards"
+msgstr "往回(&B)"
 
-#: hexeditorwidget.cc:1242 hexeditorwidget.cc:1261 hexeditorwidget.cc:2396
-msgid "Encode"
-msgstr "編碼"
+#: dialog.cc:77 dialog.cc:816
+msgid "&Stay visible"
+msgstr "保持可見(&S)"
 
-#: hexeditorwidget.cc:1242
-msgid "&Encode"
-msgstr "編碼(&E)"
+#: dialog.cc:178 hexeditorwidget.cc:1515 hexeditorwidget.cc:1529
+#: hexeditorwidget.cc:1597 searchbar.cc:73
+msgid "Find"
+msgstr "找尋"
 
-#: hexeditorwidget.cc:1259
-msgid ""
-"Could not encode data.\n"
-msgstr ""
-"無法便碼資料.\n"
+#: dialog.cc:194
+msgid "Fo&rmat:"
+msgstr "格式(&R):"
 
-#: hexeditorwidget.cc:1412
-msgid ""
-"Deleted bookmarks can not be restored.\n"
-"Proceed?"
-msgstr ""
-"刪除書籤將無法回復.\n"
-"是否執行?"
+#: dialog.cc:209 dialog.cc:520
+msgid "F&ind:"
+msgstr "找尋(&I):"
 
-#: dialog.cc:178 hexeditorwidget.cc:1515 hexeditorwidget.cc:1529
-#: hexeditorwidget.cc:1597 searchbar.cc:73
-msgid "Find"
-msgstr "找尋"
+#: dialog.cc:227 dialog.cc:568 dialog.cc:814
+msgid "&In selection"
+msgstr "在區域中(&I)"
 
-#: hexeditorwidget.cc:1528 hexeditorwidget.cc:1766
-msgid "Search key not found in document."
-msgstr "文件中找不到指定的值."
+#: dialog.cc:229
+msgid "&Use navigator"
+msgstr "使用領航員(&U)"
 
-#: hexeditorwidget.cc:1572
-msgid ""
-"End of document reached.\n"
-"Continue from the beginning?"
-msgstr ""
-"到達文件底端.\n"
-"是否從開頭繼續找尋?"
+#: dialog.cc:231 dialog.cc:572
+msgid "Ignore c&ase"
+msgstr "忽略大小寫(&A)"
 
-#: hexeditorwidget.cc:1578
-msgid ""
-"Beginning of document reached.\n"
-"Continue from the end?"
-msgstr ""
-"到達文件頂端.\n"
-"是否從結尾繼續找尋?"
+#: dialog.cc:348
+msgid "Find (Navigator)"
+msgstr "找尋 (領航員)"
 
-#: hexeditorwidget.cc:1594
-msgid ""
-"Your request can not be processed.\n"
-"No search pattern defined."
-msgstr ""
-"您的要求無法被處理.\n"
-"未定義找尋樣式."
+#: dialog.cc:349
+msgid "New &Key"
+msgstr "新值(&K)"
 
-#: hexeditorwidget.cc:1700
-msgid "Find and Replace"
-msgstr "找尋與取代"
+#: dialog.cc:350
+msgid "&Next"
+msgstr "下一個(&N)"
 
-#: hexeditorwidget.cc:1762
-msgid "Search key not found in selected area."
-msgstr "在選取的區域中找不到指定的值"
+#: dialog.cc:350
+#, fuzzy
+msgid "&Previous"
+msgstr "前一個"
+
+#: dialog.cc:362
+msgid "Searching for:"
+msgstr "找尋目標:"
 
 #: dialog.cc:485 dialog.cc:681 hexeditorwidget.cc:1768 hexeditorwidget.cc:1775
 msgid "Find & Replace"
 msgstr "找尋與取代"
 
-#: hexeditorwidget.cc:1774
-#, c-format
-msgid ""
-"_n: <qt>Operation complete."
-"<br>"
-"<br>One replacement was made.</qt>\n"
-"<qt>Operation complete."
-"<br>"
-"<br>%n replacements were made.</qt>"
-msgstr "<qt>動作已完成。<br> <br>取代了 %n 筆資料。</qt>"
-
-#: hexeditorwidget.cc:1795
-msgid ""
-"Not available yet!\n"
-"Define your own encoding"
-msgstr ""
-"目前不存在!\n"
-"定義您的編碼方式"
-
-#: hexeditorwidget.cc:1798 hexeditorwidget.cc:2313
-msgid "Encoding"
-msgstr "編碼方式"
-
-#: hexeditorwidget.cc:1831
-msgid ""
-"Could not collect strings.\n"
-msgstr ""
-"無法收集字串.\n"
-
-#: hexeditorwidget.cc:1833
-msgid "Collect Strings"
-msgstr "收集字串"
+#: dialog.cc:504
+msgid "Fo&rmat (find):"
+msgstr "格式(找尋)(&R):"
 
-#: hexeditorwidget.cc:1842
-msgid ""
-"Not available yet!\n"
-"Define a record (structure) and fill it with data from the document."
-msgstr ""
-"目前不存在!\n"
-"定義紀錄(結構)並用來自文件的資料填滿。"
+#: dialog.cc:533
+msgid "For&mat (replace):"
+msgstr "格式(取代)(&M):"
 
-#: hexeditorwidget.cc:1845
-msgid "Record Viewer"
-msgstr "紀錄檢視器"
+#: dialog.cc:550
+msgid "Rep&lace:"
+msgstr "取代(&L):"
 
-#: hexeditorwidget.cc:1917
-msgid ""
-"Could not collect document statistics.\n"
-msgstr ""
-"無法收集文件統計資訊.\n"
+#: dialog.cc:570
+msgid "&Prompt"
+msgstr "提示(&P)"
 
-#: hexeditorwidget.cc:1920
-msgid "Collect Document Statistics"
-msgstr "收集文件統計資訊"
+#: dialog.cc:657
+msgid "Source and target values can not be equal."
+msgstr "來源與目標質不能相同."
 
-#: hexeditorwidget.cc:1959
-msgid ""
-"Not available yet!\n"
-"Save or retrive your favorite layout"
-msgstr ""
-"目前不存在!\n"
-"儲存或接收您偏好的格式"
+#: dialog.cc:682
+msgid "Replace &All"
+msgstr "全部取代(&A)"
 
-#: hexeditorwidget.cc:1962
-msgid "Profiles"
-msgstr "設定檔案"
+#: dialog.cc:683
+msgid "Do Not Replace"
+msgstr "不要取代"
 
-#: hexeditorwidget.cc:1981
-#, c-format
-msgid ""
-"Malformed URL\n"
-"%1"
-msgstr ""
-"錯誤的 URL\n"
-"%1"
+#: dialog.cc:683
+#, fuzzy
+msgid "Replace"
+msgstr "取代(&L):"
 
-#: hexeditorwidget.cc:1982
-msgid "Read URL"
-msgstr "讀取 URL"
+#: dialog.cc:691
+msgid "Replace marked data at cursor position?"
+msgstr "取代在游標位置的標記資料嗎?"
 
-#: hexeditorwidget.cc:2015
-msgid "Could not save remote file."
-msgstr "不能儲存遠端檔案."
+#: dialog.cc:761
+msgid "Binary Filter"
+msgstr "二進位過濾器"
 
-#: hexeditorwidget.cc:2016 hexeditorwidget.cc:2123 hexeditorwidget.cc:2130
-#: hexeditorwidget.cc:2139 hexeditorwidget.cc:2152
-msgid "Write Failure"
-msgstr "寫入失敗"
+#: dialog.cc:780
+msgid "O&peration:"
+msgstr "操作(&P):"
 
-#: hexeditorwidget.cc:2052
-#, c-format
-msgid ""
-"The specified file does not exist.\n"
-"%1"
-msgstr ""
-"指定的檔案不存在.\n"
-"%1"
+#: dialog.cc:855
+msgid "Fo&rmat (operand):"
+msgstr "格式(運算子)(&R):"
 
-#: hexeditorwidget.cc:2053 hexeditorwidget.cc:2060 hexeditorwidget.cc:2067
-#: hexeditorwidget.cc:2075 hexeditorwidget.cc:2102 hexeditorwidget.cc:2375
-msgid "Read"
-msgstr "讀取"
+#: dialog.cc:871
+msgid "O&perand:"
+msgstr "運算子(&P):"
 
-#: hexeditorwidget.cc:2059
-#, c-format
-msgid ""
-"You have specified a folder.\n"
-"%1"
-msgstr ""
-"您指定了一個目錄.\n"
-"%1"
+#: dialog.cc:891
+msgid "Swap rule"
+msgstr "交換規則"
 
-#: hexeditorwidget.cc:2066
-#, c-format
-msgid ""
-"You do not have read permission to this file.\n"
-"%1"
-msgstr ""
-"沒有讀取這個檔案的權限. \n"
-"%1"
+#: dialog.cc:903
+msgid "&Reset"
+msgstr "重)(&R)"
 
-#: hexeditorwidget.cc:2074
-#, c-format
-msgid ""
-"An error occurred while trying to open the file.\n"
-"%1"
-msgstr ""
-"嘗試開啟檔案時發生錯誤.\n"
-"%1"
+#: dialog.cc:929
+msgid "&Group size [bytes]"
+msgstr "群組大小(位元組)(&G)"
 
-#: hexeditorwidget.cc:2103
-msgid ""
-"Could not read file.\n"
-msgstr ""
-"不能讀取檔案.\n"
+#: dialog.cc:941
+msgid "S&hift size [bits]"
+msgstr "位移大小(位元)(&H)"
 
-#: hexeditorwidget.cc:2122
-msgid "You have specified a folder."
-msgstr "您指定了一個目錄"
+#: dialog.cc:985
+msgid "Shift size is zero."
+msgstr "位移大小為 0."
 
-#: hexeditorwidget.cc:2129
-msgid "You do not have write permission."
-msgstr "您沒有寫入的權限"
+#: dialog.cc:994
+msgid "Swap rule does not define any swapping."
+msgstr "交換規則未定義任何交換."
 
-#: hexeditorwidget.cc:2138
-msgid "An error occurred while trying to open the file."
-msgstr "嘗試開啟檔案時發生錯誤"
+#: dialog.cc:1070
+msgid "Insert Pattern"
+msgstr "插入樣式"
 
-#: hexeditorwidget.cc:2150
-msgid ""
-"Could not write data to disk.\n"
-msgstr ""
-"不能將資料寫入磁碟.\n"
+#: dialog.cc:1073
+#, fuzzy
+msgid "&Insert"
+msgstr "插入(&I)..."
 
-#: hexeditorwidget.cc:2232
-msgid ""
-"Can not create text buffer.\n"
-msgstr ""
-"無法建立文字緩衝區.\n"
+#: dialog.cc:1089
+msgid "&Size:"
+msgstr "大小(&S):"
 
-#: hexeditorwidget.cc:2234
-msgid "Loading Failed"
-msgstr "讀取失敗"
+#: dialog.cc:1102
+msgid "Fo&rmat (pattern):"
+msgstr "格式(樣式)(&R):"
 
-#: hexeditorwidget.cc:2309
-msgid "Reading"
-msgstr "讀取中"
+#: dialog.cc:1118
+msgid "&Pattern:"
+msgstr "樣式(&P):"
 
-#: hexeditorwidget.cc:2310
-msgid "Writing"
-msgstr "寫入中"
+#: dialog.cc:1127
+msgid "&Offset:"
+msgstr "位移(&O):"
 
-#: hexeditorwidget.cc:2311
-msgid "Inserting"
-msgstr "插入中"
+#: dialog.cc:1142
+msgid "R&epeat pattern"
+msgstr "重複樣式(&E)"
 
-#: hexeditorwidget.cc:2312
-msgid "Printing"
-msgstr "列印中"
+#: dialog.cc:1144
+msgid "&Insert on cursor position"
+msgstr "在游標位置插入(&I)"
 
-#: hexeditorwidget.cc:2314 hexeditorwidget.cc:2401
-msgid "Collect strings"
-msgstr "收集字串"
+#: dialog.cc:1284
+msgid "Your request can not be processed."
+msgstr "您的要求無法被執行."
 
-#: hexeditorwidget.cc:2315
-msgid "Exporting"
-msgstr "匯出中"
+#: dialog.cc:1288
+msgid "Examine argument(s) and try again."
+msgstr "檢查參數並再試一次."
 
-#: hexeditorwidget.cc:2316
-msgid "Scanning"
-msgstr "掃描中"
+#: dialog.cc:1294
+msgid "Invalid argument(s)"
+msgstr "錯誤的參數"
 
-#: hexeditorwidget.cc:2376
-msgid "Do you really want to cancel reading?"
-msgstr "您確定要取消讀取嗎?"
+#: dialog.cc:1303
+msgid "You must specify a destination file."
+msgstr "您必須指定一個目標檔案."
 
-#: hexeditorwidget.cc:2380
-msgid "Write"
-msgstr "寫入"
+#: dialog.cc:1313
+msgid "You have specified an existing folder."
+msgstr "您指定了已存在的資料夾。"
 
-#: hexeditorwidget.cc:2381
+#: dialog.cc:1320
+msgid "You do not have write permission to this file."
+msgstr "您沒有這個檔案的寫入權限."
+
+#: dialog.cc:1325
 msgid ""
-"Do you really want to cancel writing?\n"
-"WARNING: Canceling can corrupt your data on disk"
-msgstr "您確定要取消寫入嗎？警告: 取消可能會破壞您磁碟中的資料"
+"You have specified an existing file.\n"
+"Overwrite current file?"
+msgstr ""
+"您指定了一個已經存在的檔案.\n"
+"是否蓋寫?"
 
-#: hexeditorwidget.cc:2387
-msgid "Do you really want to cancel inserting?"
-msgstr "您確定要取消插入嗎?"
+#: dialog.cc:1328 hexeditorwidget.cc:990
+msgid "Overwrite"
+msgstr "覆寫"
 
-#: hexeditorwidget.cc:2392
-msgid "Do you really want to cancel printing?"
-msgstr "您確定要取消列印嗎?"
+#: dialog.cc:1405
+msgid "Regular Text"
+msgstr "一般文字:"
 
-#: hexeditorwidget.cc:2397
-msgid "Do you really want to cancel encoding?"
-msgstr "您確定要取消編碼嗎?"
+#: dialog.cc:1416
+msgid "operand AND data"
+msgstr "操作子 AND 資料"
 
-#: hexeditorwidget.cc:2402
-msgid "Do you really want to cancel string scanning?"
-msgstr "您確定要取消字串掃描嗎?"
+#: dialog.cc:1417
+msgid "operand OR data"
+msgstr "操作子 OR 資料"
 
-#: hexeditorwidget.cc:2407
-msgid "Do you really want to cancel exporting?"
-msgstr "您確定要取消匯出嗎?"
+#: dialog.cc:1418
+msgid "operand XOR data"
+msgstr "操作子 XOR 資料"
 
-#: hexeditorwidget.cc:2411
-msgid "Collect document statistics"
-msgstr "收集文件資訊"
+#: dialog.cc:1419
+msgid "INVERT data"
+msgstr "反轉資料"
 
-#: hexeditorwidget.cc:2412
-msgid "Do you really want to cancel document scanning?"
-msgstr "您確定要取消文件掃描嗎?"
+#: dialog.cc:1420
+msgid "REVERSE data"
+msgstr "逆轉資料"
 
-#: hexeditorwidget.cc:2432
-msgid ""
-"Could not finish operation.\n"
-msgstr ""
-"無法完成操作.\n"
+#: dialog.cc:1421
+msgid "ROTATE data"
+msgstr "旋轉資料"
 
-#: hexmanagerwidget.cc:136
-msgid "Conversion"
-msgstr "轉換"
+#: dialog.cc:1422
+msgid "SHIFT data"
+msgstr "移動資料"
 
-#: stringdialog.cc:38 stringdialog.cc:201
-msgid "Extract Strings"
-msgstr "取得字串"
+#: dialog.cc:1423
+msgid "Swap Individual Bits"
+msgstr "交換獨立位元"
 
-#: stringdialog.cc:57
-msgid "&Minimum length:"
-msgstr "最小長度(&M):"
+#: exportdialog.cc:35 exportdialog.cc:493 exportdialog.cc:537
+#: exportdialog.cc:566 exportdialog.cc:634
+msgid "Export Document"
+msgstr "匯出文件"
 
-#: stringdialog.cc:66
-msgid "&Filter:"
-msgstr "過濾器(&F):"
+#: exportdialog.cc:40
+msgid "Destination"
+msgstr "目標"
 
-#: stringdialog.cc:71
-msgid "&Use"
-msgstr "使用(&U)"
+#: exportdialog.cc:158
+msgid "Plain Text"
+msgstr "純文字"
 
-#: stringdialog.cc:80
-msgid "&Ignore case"
-msgstr "忽略大小寫(&I)"
+#: exportdialog.cc:159
+msgid "HTML Tables"
+msgstr "HTML 表格"
 
-#: stringdialog.cc:84
-msgid "Show offset as &decimal"
-msgstr "十進位顯示位移(&D)"
+#: exportdialog.cc:160
+msgid "Rich Text (RTF)"
+msgstr "Rich Text(RTF)"
 
-#: hexviewwidget.cc:1102 stringdialog.cc:95
-msgid "Offset"
-msgstr "位移"
+#: exportdialog.cc:161
+msgid "C Array"
+msgstr "C 陣列"
 
-#: stringdialog.cc:96
-msgid "String"
-msgstr "字串"
+#: exportdialog.cc:169
+msgid "&Format:"
+msgstr "格式(&F):"
 
-#: stringdialog.cc:106
-msgid "Number of strings:"
-msgstr "字串數目:"
+#: exportdialog.cc:177
+msgid "&Destination:"
+msgstr "目標(&D):"
 
-#: stringdialog.cc:114
-msgid "Displayed:"
-msgstr "顯示:"
+#: exportdialog.cc:181
+msgid "(Package folder)"
+msgstr "(套件目錄)"
 
-#: stringdialog.cc:197
-msgid ""
-"The filter expression you have specified is illegal. You must specify a valid "
-"regular expression.\n"
-"Continue without filter?"
-msgstr ""
-"您指定的過濾敘述是不合法的. 您必須指定一個有效的正規表示語句.\n"
-"不過濾而繼續執行?"
+#: exportdialog.cc:191
+msgid "Choose..."
+msgstr "選擇..."
 
-#: fileinfodialog.cc:160 stringdialog.cc:254
-msgid "Warning: Document has been modified since last update"
-msgstr "警告: 文件在上次更新候已經被修改"
+#: exportdialog.cc:202
+msgid "Export Range"
+msgstr "匯出範圍"
 
-#: fileinfodialog.cc:73
-msgid "Statistics"
-msgstr "統計資料"
+#: exportdialog.cc:210
+msgid "&Everything"
+msgstr "全部(&E)"
 
-#: fileinfodialog.cc:89
-msgid "File name: "
-msgstr "檔案名稱: "
+#: exportdialog.cc:215
+msgid "&Selection"
+msgstr "選擇的區域(&S)"
 
-#: fileinfodialog.cc:93
-msgid "Size [bytes]: "
-msgstr "大小 (位元組): "
+#: exportdialog.cc:220
+msgid "&Range"
+msgstr "範圍(&R)"
 
-#: chartabledialog.cc:50 dialog.cc:1401 fileinfodialog.cc:105
-msgid "Hexadecimal"
-msgstr "十六進位"
+#: exportdialog.cc:229
+msgid "&From offset:"
+msgstr "從位移(&F):"
 
-#: chartabledialog.cc:49 dialog.cc:1402 fileinfodialog.cc:106
-msgid "Decimal"
-msgstr "十進位"
+#: exportdialog.cc:235
+msgid "&To offset:"
+msgstr "到位移(&T):"
 
-#: chartabledialog.cc:51 dialog.cc:1403 fileinfodialog.cc:107
-msgid "Octal"
-msgstr "八進位"
+#: exportdialog.cc:280 exportdialog.cc:374
+msgid "No options for this format."
+msgstr "這個格式沒有選項"
 
-#: chartabledialog.cc:52 dialog.cc:1404 fileinfodialog.cc:108
-msgid "Binary"
-msgstr "二進位"
+#: exportdialog.cc:296
+msgid "HTML Options (one table per page)"
+msgstr "HTML 選項. (每頁一個表格)"
 
-#: chartabledialog.cc:53 fileinfodialog.cc:109
-msgid "Text"
-msgstr "純文字"
+#: exportdialog.cc:317
+msgid "&Lines per table:"
+msgstr "表格行數(&L):"
 
-#: fileinfodialog.cc:110
-msgid "Occurrence"
-msgstr "出現"
+#: exportdialog.cc:325
+msgid "Filename &prefix (in package):"
+msgstr "檔名前置(套件中)(&P):"
 
-#: fileinfodialog.cc:111
-msgid "Percent"
-msgstr "百分比"
+#: exportdialog.cc:330 optiondialog.cc:175 optiondialog.cc:438
+#: printdialogpage.cc:124 printdialogpage.cc:130
+msgid "None"
+msgstr "無"
+
+#: exportdialog.cc:331
+msgid "Filename with Path"
+msgstr "含路徑的檔名"
 
-#: toplevel.cc:133
-msgid "&Insert..."
-msgstr "插入(&I)..."
+#: exportdialog.cc:332 printdialogpage.cc:127
+msgid "Filename"
+msgstr "檔名"
 
-#: toplevel.cc:143
-msgid "E&xport..."
-msgstr "匯出(&X)..."
+#: exportdialog.cc:333 printdialogpage.cc:126
+msgid "Page Number"
+msgstr "頁碼"
 
-#: toplevel.cc:145
-msgid "&Cancel Operation"
-msgstr "取消操作(&C)"
+#: exportdialog.cc:339
+msgid "Header &above text:"
+msgstr "標頭文字(&A):"
 
-#: toplevel.cc:147
-msgid "&Read Only"
-msgstr "唯讀(&R)"
+#: exportdialog.cc:347
+msgid "&Footer below text:"
+msgstr "註腳文字(&F):"
 
-#: toplevel.cc:149
-msgid "&Allow Resize"
-msgstr "允許改變大小(&A)"
+#: exportdialog.cc:351
+msgid "Link \"index.html\" to &table of contents file"
+msgstr "將 \"index.html\" 連結到內容表檔案(&T)"
 
-#: toplevel.cc:151
-msgid "N&ew Window"
-msgstr "新視窗(&E)"
+#: exportdialog.cc:355
+msgid "&Include navigator bar"
+msgstr ")含領航列(&I)"
 
-#: toplevel.cc:153
-msgid "Close &Window"
-msgstr "關閉視窗(&W)"
+#: exportdialog.cc:359
+msgid "&Use black and white only"
+msgstr "僅使用黑白(&U)"
 
-#: toplevel.cc:168
-msgid "&Goto Offset..."
-msgstr "跳到位移(&G)..."
+#: exportdialog.cc:388
+msgid "C Array Options"
+msgstr "C 陣列選項"
 
-#: toplevel.cc:170
-msgid "&Insert Pattern..."
-msgstr "插入樣式(&I)..."
+#: exportdialog.cc:402
+msgid "Array name:"
+msgstr "陣列名稱:"
 
-#: toplevel.cc:173
-msgid "Copy as &Text"
-msgstr "以文字拷貝(&T)"
+#: exportdialog.cc:407
+msgid "char"
+msgstr "字元"
 
-#: toplevel.cc:175
-msgid "Paste into New &File"
-msgstr "貼到新檔案(&F)"
+#: exportdialog.cc:408
+msgid "unsigned char"
+msgstr "無符號字元"
 
-#: toplevel.cc:177
-msgid "Paste into New &Window"
-msgstr "些到新視窗(&W)"
+#: exportdialog.cc:409
+msgid "short"
+msgstr "短數"
 
-#: parts/kpart/khepart.cpp:94 toplevel.cc:180
-msgid "&Hexadecimal"
-msgstr "十六進位制(&H)"
+#: exportdialog.cc:410
+msgid "unsigned short"
+msgstr "無符號短數"
 
-#: parts/kpart/khepart.cpp:95 toplevel.cc:182
-msgid "&Decimal"
-msgstr "十進位制(&D)"
+#: exportdialog.cc:411
+msgid "int"
+msgstr "整數"
 
-#: parts/kpart/khepart.cpp:96 toplevel.cc:184
-msgid "&Octal"
-msgstr "八進位制(&O)"
+#: exportdialog.cc:412
+msgid "unsigned int"
+msgstr "無符號整數"
 
-#: parts/kpart/khepart.cpp:97 toplevel.cc:186
-msgid "&Binary"
-msgstr "二進位制(&B)"
+#: exportdialog.cc:413
+msgid "float"
+msgstr "浮點數"
 
-#: toplevel.cc:188
-msgid "&Text"
-msgstr "文字(&T)"
+#: exportdialog.cc:414
+msgid "double"
+msgstr "倍精度數"
 
-#: toplevel.cc:196
-msgid "Show O&ffset Column"
-msgstr "顯示位移欄位(&F)"
+#: exportdialog.cc:419
+msgid "Element type:"
+msgstr "元素類別:"
 
-#: toplevel.cc:198
-msgid "Show Te&xt Field"
-msgstr "顯示文字區域(&X)"
+#: exportdialog.cc:427
+msgid "Elements per line:"
+msgstr "每行元素數:"
 
-#: toplevel.cc:200
-msgid "Off&set as Decimal"
-msgstr "十進位顯示位移(&s)"
+#: exportdialog.cc:431
+msgid "Print unsigned values as hexadecimal"
+msgstr "以十六進位印出無符號數值"
 
-#: toplevel.cc:202
-msgid "&Upper Case (Data)"
-msgstr "大寫 (資料)(&U)"
+#: exportdialog.cc:535
+msgid "The filename prefix can not contain empty letters or punctuation marks."
+msgstr "檔名前置不能有空白或標點符號。"
 
-#: toplevel.cc:204
-msgid "Upper &Case (Offset)"
-msgstr "大寫 (位移)(&C)"
+#: exportdialog.cc:561
+msgid "This format is not yet supported."
+msgstr "抱歉, 這個格式目前尚不支援。"
 
-#: toplevel.cc:207
-msgid ""
-"_: &Default encoding\n"
-"&Default"
-msgstr "預設值(&D)"
+#: exportdialog.cc:638
+msgid "You must specify a destination."
+msgstr "您必須指定一個目標."
 
-#: toplevel.cc:209
-msgid "US-&ASCII (7 bit)"
-msgstr "US-ASCII (7 位元)(&A)"
+#: exportdialog.cc:650
+msgid "Unable to create a new folder"
+msgstr "無法建立新目錄"
 
-#: toplevel.cc:211
-msgid "&EBCDIC"
-msgstr "EBCDIC(&E)"
+#: exportdialog.cc:661
+msgid "You have specified an existing file"
+msgstr "您指令了已經存在的檔案"
 
-#: toplevel.cc:219
-msgid "&Extract Strings..."
-msgstr "取得字串(&E)..."
+#: exportdialog.cc:669
+msgid "You do not have write permission to this folder."
+msgstr "您沒有這個資料夾的寫入權限."
 
-#: toplevel.cc:223
-msgid "&Binary Filter..."
-msgstr "二進位過濾器(&B)..."
+#: exportdialog.cc:679
+msgid ""
+"You have specified an existing folder.\n"
+"If you continue, any existing file in the range \"%1\" to \"%2\" can be "
+"lost.\n"
+"Continue?"
+msgstr ""
+"您指定了已經存在的目錄。\n"
+"如果您繼續, 所有在下列範圍中的檔案\"%1\" 到 \"%2\"將會遺失.\n"
+"是否繼續?"
 
-#: toplevel.cc:225
-msgid "&Character Table"
-msgstr "字元表 (&C)"
+#: fileinfodialog.cc:73
+msgid "Statistics"
+msgstr "統計資料"
 
-#: toplevel.cc:227
-msgid "C&onverter"
-msgstr "轉換器 (&O)"
+#: fileinfodialog.cc:74 stringdialog.cc:39
+msgid "&Update"
+msgstr ""
 
-#: toplevel.cc:229
-msgid "&Statistics"
-msgstr "統計資料 (&S)"
+#: fileinfodialog.cc:89
+msgid "File name: "
+msgstr "檔案名稱: "
 
-#: toplevel.cc:234
-msgid "&Replace Bookmark"
-msgstr "取代書籤(&R)"
+#: fileinfodialog.cc:93
+msgid "Size [bytes]: "
+msgstr "大小 (位元組): "
 
-#: toplevel.cc:236
-msgid "R&emove Bookmark"
-msgstr "移除書籤(&E)"
+#: fileinfodialog.cc:110
+msgid "Occurrence"
+msgstr "出現"
 
-#: toplevel.cc:238
-msgid "Re&move All"
-msgstr "全部移除(&M)"
+#: fileinfodialog.cc:111
+msgid "Percent"
+msgstr "百分比"
 
-#: toplevel.cc:240
-msgid "Goto &Next Bookmark"
-msgstr "移到下一個書籤(&N)"
+#: fileinfodialog.cc:160 stringdialog.cc:254
+msgid "Warning: Document has been modified since last update"
+msgstr "警告: 文件在上次更新候已經被修改"
 
-#: toplevel.cc:243
-msgid "Goto &Previous Bookmark"
-msgstr "移到前一個書籤(&P)"
+#: hexbuffer.cc:571 toplevel.cc:482 toplevel.cc:501 toplevel.cc:514
+#, fuzzy
+msgid "Untitled"
+msgstr "未命名 %1"
 
-#: toplevel.cc:249
-msgid "Show F&ull Path"
-msgstr "顯示完整路徑(&U)"
+#: hexbuffer.cc:1925 hexbuffer.cc:4832
+msgid "Page %1 of %2"
+msgstr "第 %1 頁, 共 %2 頁"
 
-#: toplevel.cc:252 toplevel.cc:262 toplevel.cc:272
-msgid "&Hide"
-msgstr "隱藏(&H)"
+#: hexbuffer.cc:2852
+msgid "to"
+msgstr "到"
 
-#: toplevel.cc:254 toplevel.cc:274
-msgid "&Above Editor"
-msgstr "上面編輯器(&A)"
+#: hexbuffer.cc:4790
+msgid "Page"
+msgstr ""
 
-#: toplevel.cc:256 toplevel.cc:276
-msgid "&Below Editor"
-msgstr "下面編輯器(&B)"
+#: hexbuffer.cc:4853 hexbuffer.cc:4858
+msgid "Next"
+msgstr "下一個"
 
-#: toplevel.cc:264
-msgid "&Floating"
-msgstr "浮動(&F)"
+#: hexbuffer.cc:4863 hexbuffer.cc:4868
+msgid "Previous"
+msgstr "前一個"
 
-#: toplevel.cc:266
-msgid "&Embed in Main Window"
-msgstr "嵌入主視窗(&E)"
+#: hexbuffer.cc:4873 hexbuffer.cc:4878
+msgid "Contents"
+msgstr ""
 
-#: toplevel.cc:293
-msgid "Drag document"
-msgstr "拖曳文件"
+#: hexbuffer.cc:4886
+msgid "Generated by khexedit"
+msgstr "由 KHexEdit 產生"
 
-#: toplevel.cc:294
-msgid "Drag Document"
-msgstr "拖曳文件"
+#: hexeditorwidget.cc:583
+#, c-format
+msgid "Untitled %1"
+msgstr "未命名 %1"
 
-#: toplevel.cc:304
-msgid "Toggle write protection"
-msgstr "切換寫入保護"
+#: hexeditorwidget.cc:607
+msgid "Unable to create new document."
+msgstr "無法建立新文件."
 
-#: toplevel.cc:329
-msgid "Selection: 0000:0000 0000:0000"
-msgstr "選取: 0000:0000 0000:0000"
+#: hexeditorwidget.cc:608
+msgid "Operation Failed"
+msgstr "操作失敗"
 
-#: toplevel.cc:331
-msgid "M"
-msgstr "M"
+#: hexeditorwidget.cc:770
+msgid "Insert File"
+msgstr "插入檔案"
 
-#: toplevel.cc:332 toplevel.cc:993
-msgid "OVR"
-msgstr "取代"
+#: hexeditorwidget.cc:780
+msgid "Only local files are currently supported."
+msgstr "目前僅支援本地端檔案."
 
-#: toplevel.cc:333
-msgid "Size: FFFFFFFFFF"
-msgstr "大小: FFFFFFFFFF"
+#: hexeditorwidget.cc:868
+msgid ""
+"The current document has been modified.\n"
+"Do you want to save it?"
+msgstr ""
+"目前的檔案已經被修改.\n"
+"要儲存嗎?"
 
-#: toplevel.cc:334
-msgid "Offset: FFFFFFFFFF-F"
-msgstr "位移: FFFFFFFFFF-F"
+#: hexeditorwidget.cc:933
+msgid ""
+"Current document has been changed on disk.\n"
+"If you save now, those changes will be lost.\n"
+"Proceed?"
+msgstr ""
+"磁碟上的檔案已經變更.\n"
+"如果您儲存, 那些變更將會失去.\n"
+"是否執行?"
 
-#: toplevel.cc:335
-msgid "FFF"
-msgstr "FFF"
+#: hexeditorwidget.cc:938
+msgid "Save"
+msgstr ""
 
-#: toplevel.cc:336 toplevel.cc:893
-msgid "RW"
-msgstr "RW"
+#: hexeditorwidget.cc:986
+msgid ""
+"A document with this name already exists.\n"
+"Do you want to overwrite it?"
+msgstr ""
+"相同檔名的檔案已經存在.\n"
+"要蓋寫嗎?"
 
-#: toplevel.cc:346 toplevel.cc:750
-msgid "Offset:"
-msgstr "位移:"
+#: hexeditorwidget.cc:990
+msgid "Save As"
+msgstr ""
 
-#: toplevel.cc:347
-msgid "Size:"
-msgstr "大小:"
+#: hexeditorwidget.cc:1023
+msgid "The current document does not exist on the disk."
+msgstr "目前的檔案不存在磁碟上."
 
-#: toplevel.cc:536
-#, c-format
-msgid "Non local recent file: %1"
-msgstr "最近編輯的非本地端檔案: %1"
+#: hexeditorwidget.cc:1024 hexeditorwidget.cc:1043
+msgid "Reload"
+msgstr ""
 
-#: toplevel.cc:546
+#: hexeditorwidget.cc:1033
 msgid ""
-"Can not create new window.\n"
+"The current document has changed on the disk and also contains unsaved "
+"modifications.\n"
+"If you reload now, the modifications will be lost."
 msgstr ""
-"無法建立新視窗.\n"
+"磁碟上的檔案已經變更, 且含了未儲存的變更.\n"
+"如果您現在重新載入，變更會遺失掉。"
 
-#: toplevel.cc:582
+#: hexeditorwidget.cc:1039
 msgid ""
-"There are windows with unsaved modified documents. If you quit now, these "
-"modifications will be lost."
-msgstr "視窗內有未儲存但變更過的文件。如果您現在離開，所有的變更將會消失。"
+"The current document contains unsaved modifications.\n"
+"If you reload now, the modifications will be lost."
+msgstr "視窗內有未儲存但變更過的文件。如果您重新載入，所有的變更將會消失。"
 
-#: toplevel.cc:791
-#, c-format
-msgid "Size: %1"
-msgstr "大小: %1"
+#: hexeditorwidget.cc:1043
+msgid "&Reload"
+msgstr ""
 
-#: searchbar.cc:63 toplevel.cc:862
-msgid "Hex"
-msgstr "Hex"
+#: hexeditorwidget.cc:1073
+msgid "Print Hex-Document"
+msgstr "列印十六進位文件"
 
-#: searchbar.cc:63 toplevel.cc:866
-msgid "Dec"
-msgstr "Dec"
+#: hexeditorwidget.cc:1123
+msgid "Could not print data.\n"
+msgstr "不能列印資料.\n"
 
-#: searchbar.cc:63 toplevel.cc:870
-msgid "Oct"
-msgstr "Oct"
+#: hexeditorwidget.cc:1128 hexeditorwidget.cc:1152 hexeditorwidget.cc:2391
+#, fuzzy
+msgid "Print"
+msgstr "列印中"
 
-#: searchbar.cc:63 toplevel.cc:874
-msgid "Bin"
-msgstr "Bin"
+#: hexeditorwidget.cc:1147
+#, c-format
+msgid ""
+"_n: <qt>Print threshold exceeded.<br>You are about to print one page."
+"<br>Proceed?</qt>\n"
+"<qt>Print threshold exceeded.<br>You are about to print %n pages.<br>Proceed?"
+"</qt>"
+msgstr "<qt>超過印表機處理能力。<br>您將印出約 %n 頁。<br>是否執行?</qt>"
 
-#: searchbar.cc:64 toplevel.cc:878
-msgid "Txt"
-msgstr "文字"
+#: hexeditorwidget.cc:1192 hexeditorwidget.cc:1209 hexeditorwidget.cc:1226
+msgid "Unable to export data.\n"
+msgstr "無法匯出資料.\n"
 
-#: toplevel.cc:893
-msgid "R"
-msgstr "R"
+#: hexeditorwidget.cc:1194 hexeditorwidget.cc:1211 hexeditorwidget.cc:1228
+#: hexeditorwidget.cc:2406
+#, fuzzy
+msgid "Export"
+msgstr "匯出中"
 
-#: toplevel.cc:925
-#, c-format
-msgid "Offset: %1"
-msgstr "位移: %1"
+#: hexeditorwidget.cc:1237
+msgid ""
+"The encoding you have selected is not reversible.\n"
+"If you revert to the original encoding later, there is no guarantee that the "
+"data can be restored to the original state."
+msgstr ""
+"您所選擇的編碼方式是不可逆的.\n"
+"如果你稍後選擇原來的編碼，我們無法保證您日後還能回復原先的狀態。"
 
-#: toplevel.cc:993
-msgid "INS"
-msgstr "插入"
+#: hexeditorwidget.cc:1242 hexeditorwidget.cc:1261 hexeditorwidget.cc:2396
+msgid "Encode"
+msgstr "編碼"
 
-#: toplevel.cc:1024 toplevel.cc:1189
-#, c-format
-msgid "Encoding: %1"
-msgstr "編碼方式: %1"
+#: hexeditorwidget.cc:1242
+msgid "&Encode"
+msgstr "編碼(&E)"
 
-#: toplevel.cc:1172
-msgid "Selection:"
-msgstr "選取:"
+#: hexeditorwidget.cc:1259
+msgid "Could not encode data.\n"
+msgstr "無法便碼資料.\n"
 
-#: converterdialog.cc:71
-msgid "Converter"
-msgstr "轉換器"
+#: hexeditorwidget.cc:1412
+msgid ""
+"Deleted bookmarks can not be restored.\n"
+"Proceed?"
+msgstr ""
+"刪除書籤將無法回復.\n"
+"是否執行?"
 
-#: converterdialog.cc:72
-msgid "&On Cursor"
-msgstr "在游標(&O)"
+#: hexeditorwidget.cc:1528 hexeditorwidget.cc:1766
+msgid "Search key not found in document."
+msgstr "文件中找不到指定的值."
 
-#: converterdialog.cc:81 hextoolwidget.cc:56
-msgid "Hexadecimal:"
-msgstr "十六進位:"
+#: hexeditorwidget.cc:1572
+msgid ""
+"End of document reached.\n"
+"Continue from the beginning?"
+msgstr ""
+"到達文件底端.\n"
+"是否從開頭繼續找尋?"
 
-#: converterdialog.cc:83
-msgid "Decimal:"
-msgstr "十進位"
+#: hexeditorwidget.cc:1578
+msgid ""
+"Beginning of document reached.\n"
+"Continue from the end?"
+msgstr ""
+"到達文件頂端.\n"
+"是否從結尾繼續找尋?"
 
-#: converterdialog.cc:85 hextoolwidget.cc:56
-msgid "Octal:"
-msgstr "八進位:"
+#: hexeditorwidget.cc:1594
+msgid ""
+"Your request can not be processed.\n"
+"No search pattern defined."
+msgstr ""
+"您的要求無法被處理.\n"
+"未定義找尋樣式."
 
-#: converterdialog.cc:87 hextoolwidget.cc:57
-msgid "Binary:"
-msgstr "二進位:"
+#: hexeditorwidget.cc:1700
+msgid "Find and Replace"
+msgstr "找尋與取代"
 
-#: converterdialog.cc:89 hextoolwidget.cc:57
-msgid "Text:"
-msgstr "純文字:"
+#: hexeditorwidget.cc:1762
+msgid "Search key not found in selected area."
+msgstr "在選取的區域中找不到指定的值"
 
-#: printdialogpage.cc:38
-msgid "Page Layout"
-msgstr "頁面編排"
+#: hexeditorwidget.cc:1774
+#, c-format
+msgid ""
+"_n: <qt>Operation complete.<br><br>One replacement was made.</qt>\n"
+"<qt>Operation complete.<br><br>%n replacements were made.</qt>"
+msgstr "<qt>動作已完成。<br> <br>取代了 %n 筆資料。</qt>"
 
-#: printdialogpage.cc:59
-msgid "Margins [millimeter]"
-msgstr "邊界 [公厘]"
+#: hexeditorwidget.cc:1795
+msgid ""
+"Not available yet!\n"
+"Define your own encoding"
+msgstr ""
+"目前不存在!\n"
+"定義您的編碼方式"
 
-#: printdialogpage.cc:72
-msgid "&Top:"
-msgstr "頂端(&T):"
+#: hexeditorwidget.cc:1798 hexeditorwidget.cc:2313
+msgid "Encoding"
+msgstr "編碼方式"
 
-#: printdialogpage.cc:73
-msgid "&Bottom:"
-msgstr "底部(&B):"
+#: hexeditorwidget.cc:1831
+msgid "Could not collect strings.\n"
+msgstr "無法收集字串.\n"
 
-#: printdialogpage.cc:74
-msgid "&Left:"
-msgstr "左邊(&L):"
+#: hexeditorwidget.cc:1833
+msgid "Collect Strings"
+msgstr "收集字串"
 
-#: printdialogpage.cc:75
-msgid "&Right:"
-msgstr "右邊(&R):"
+#: hexeditorwidget.cc:1842
+msgid ""
+"Not available yet!\n"
+"Define a record (structure) and fill it with data from the document."
+msgstr ""
+"目前不存在!\n"
+"定義紀錄(結構)並用來自文件的資料填滿。"
 
-#: printdialogpage.cc:102
-msgid "Draw h&eader above text"
-msgstr "在文字上繪製標頭"
+#: hexeditorwidget.cc:1845
+msgid "Record Viewer"
+msgstr "紀錄檢視器"
 
-#: printdialogpage.cc:118
-msgid "Left:"
-msgstr "左邊(&L):"
+#: hexeditorwidget.cc:1917
+msgid "Could not collect document statistics.\n"
+msgstr "無法收集文件統計資訊.\n"
 
-#: printdialogpage.cc:119
-msgid "Center:"
-msgstr "中央:"
+#: hexeditorwidget.cc:1920
+msgid "Collect Document Statistics"
+msgstr "收集文件統計資訊"
 
-#: printdialogpage.cc:120
-msgid "Right:"
-msgstr "右邊:"
+#: hexeditorwidget.cc:1959
+msgid ""
+"Not available yet!\n"
+"Save or retrive your favorite layout"
+msgstr ""
+"目前不存在!\n"
+"儲存或接收您偏好的格式"
 
-#: printdialogpage.cc:121
-msgid "Border:"
-msgstr "邊框："
+#: hexeditorwidget.cc:1962
+msgid "Profiles"
+msgstr "設定檔案"
 
-#: exportdialog.cc:330 optiondialog.cc:175 optiondialog.cc:438
-#: printdialogpage.cc:124 printdialogpage.cc:130
-msgid "None"
-msgstr "無"
+#: hexeditorwidget.cc:1981
+#, c-format
+msgid ""
+"Malformed URL\n"
+"%1"
+msgstr ""
+"錯誤的 URL\n"
+"%1"
 
-#: printdialogpage.cc:125
-msgid "Date & Time"
-msgstr "日期與時間"
+#: hexeditorwidget.cc:1982
+msgid "Read URL"
+msgstr "讀取 URL"
 
-#: exportdialog.cc:333 printdialogpage.cc:126
-msgid "Page Number"
-msgstr "頁碼"
+#: hexeditorwidget.cc:2015
+msgid "Could not save remote file."
+msgstr "不能儲存遠端檔案."
 
-#: exportdialog.cc:332 printdialogpage.cc:127
-msgid "Filename"
-msgstr "檔名"
+#: hexeditorwidget.cc:2016 hexeditorwidget.cc:2123 hexeditorwidget.cc:2130
+#: hexeditorwidget.cc:2139 hexeditorwidget.cc:2152
+msgid "Write Failure"
+msgstr "寫入失敗"
 
-#: printdialogpage.cc:131
-msgid "Single Line"
-msgstr "單行"
+#: hexeditorwidget.cc:2052
+#, c-format
+msgid ""
+"The specified file does not exist.\n"
+"%1"
+msgstr ""
+"指定的檔案不存在.\n"
+"%1"
 
-#: printdialogpage.cc:132
-msgid "Rectangle"
-msgstr "長方形"
+#: hexeditorwidget.cc:2053 hexeditorwidget.cc:2060 hexeditorwidget.cc:2067
+#: hexeditorwidget.cc:2075 hexeditorwidget.cc:2102 hexeditorwidget.cc:2375
+msgid "Read"
+msgstr "讀取"
 
-#: printdialogpage.cc:164
-msgid "Draw &footer below text"
-msgstr "在文字下繪製註腳"
+#: hexeditorwidget.cc:2059
+#, c-format
+msgid ""
+"You have specified a folder.\n"
+"%1"
+msgstr ""
+"您指定了一個目錄.\n"
+"%1"
 
-#: _translatorinfo.cpp:1
+#: hexeditorwidget.cc:2066
+#, c-format
 msgid ""
-"_: NAME OF TRANSLATORS\n"
-"Your names"
-msgstr "Jing-Jong Shyue, Yaun-Chen Cheng"
+"You do not have read permission to this file.\n"
+"%1"
+msgstr ""
+"沒有讀取這個檔案的權限. \n"
+"%1"
 
-#: _translatorinfo.cpp:3
+#: hexeditorwidget.cc:2074
+#, c-format
 msgid ""
-"_: EMAIL OF TRANSLATORS\n"
-"Your emails"
-msgstr "shyue@sonoma.com.tw, ycheng@sinica.edu.tw"
+"An error occurred while trying to open the file.\n"
+"%1"
+msgstr ""
+"嘗試開啟檔案時發生錯誤.\n"
+"%1"
 
-#: parts/kpart/khepartfactory.cpp:30
-msgid "KHexEdit2Part"
-msgstr "KHexEdit2Part"
+#: hexeditorwidget.cc:2102 hexeditorwidget.cc:2386
+#, fuzzy
+msgid "Insert"
+msgstr "插入中"
 
-#: parts/kpart/khepartfactory.cpp:31
-msgid "Embedded hex editor"
-msgstr "嵌入式十六進位編輯器"
+#: hexeditorwidget.cc:2103
+msgid "Could not read file.\n"
+msgstr "不能讀取檔案.\n"
 
-#: parts/kpart/khepartfactory.cpp:36
-msgid "Author"
-msgstr "作者"
+#: hexeditorwidget.cc:2122
+msgid "You have specified a folder."
+msgstr "您指定了一個目錄"
 
-#: parts/kpart/khepart.cpp:92
-msgid "&Value Coding"
-msgstr "數值表示(&V)"
+#: hexeditorwidget.cc:2129
+msgid "You do not have write permission."
+msgstr "您沒有寫入的權限"
 
-#: parts/kpart/khepart.cpp:102
-msgid "&Char Encoding"
-msgstr "字元編碼(&C)"
+#: hexeditorwidget.cc:2138
+msgid "An error occurred while trying to open the file."
+msgstr "嘗試開啟檔案時發生錯誤"
 
-#: parts/kpart/khepart.cpp:106
-msgid "Show &Unprintable Chars (<32)"
-msgstr "顯示控制字元(ASCII<32)(&U)"
+#: hexeditorwidget.cc:2150
+msgid "Could not write data to disk.\n"
+msgstr "不能將資料寫入磁碟.\n"
 
-#: parts/kpart/khepart.cpp:112
-msgid "&Resize Style"
-msgstr "調整大小型態(&R)"
+#: hexeditorwidget.cc:2232
+msgid "Can not create text buffer.\n"
+msgstr "無法建立文字緩衝區.\n"
 
-#: parts/kpart/khepart.cpp:114
-msgid "&No Resize"
-msgstr "不調整(&N)"
+#: hexeditorwidget.cc:2234
+msgid "Loading Failed"
+msgstr "讀取失敗"
 
-#: parts/kpart/khepart.cpp:115
-msgid "&Lock Groups"
-msgstr "鎖定群組(&L)"
+#: hexeditorwidget.cc:2309
+msgid "Reading"
+msgstr "讀取中"
 
-#: parts/kpart/khepart.cpp:116
-msgid "&Full Size Usage"
-msgstr "使用完整大小(&F)"
+#: hexeditorwidget.cc:2310
+msgid "Writing"
+msgstr "寫入中"
 
-#: parts/kpart/khepart.cpp:120
-msgid "&Line Offset"
-msgstr "行位移(&L)"
+#: hexeditorwidget.cc:2311
+msgid "Inserting"
+msgstr "插入中"
 
-#: parts/kpart/khepart.cpp:123
-msgid "&Columns"
-msgstr "欄位(&C)"
+#: hexeditorwidget.cc:2312
+msgid "Printing"
+msgstr "列印中"
 
-#: parts/kpart/khepart.cpp:125
-msgid "&Values Column"
-msgstr "數值欄位(&V)"
+#: hexeditorwidget.cc:2314 hexeditorwidget.cc:2401
+msgid "Collect strings"
+msgstr "收集字串"
 
-#: parts/kpart/khepart.cpp:126
-msgid "&Chars Column"
-msgstr "字元欄位(&C)"
+#: hexeditorwidget.cc:2315
+msgid "Exporting"
+msgstr "匯出中"
 
-#: parts/kpart/khepart.cpp:127
-msgid "&Both Columns"
-msgstr "兩個欄位(&B)"
+#: hexeditorwidget.cc:2316
+msgid "Scanning"
+msgstr "掃描中"
 
-#: dialog.cc:44
-msgid "Goto Offset"
-msgstr "跳到位移"
+#: hexeditorwidget.cc:2376
+msgid "Do you really want to cancel reading?"
+msgstr "您確定要取消讀取嗎?"
 
-#: dialog.cc:60
-msgid "O&ffset:"
-msgstr "位移(&F):"
+#: hexeditorwidget.cc:2380
+msgid "Write"
+msgstr "寫入"
 
-#: dialog.cc:73 dialog.cc:223 dialog.cc:564 dialog.cc:810
-msgid "&From cursor"
-msgstr "從游標(&F)"
+#: hexeditorwidget.cc:2381
+msgid ""
+"Do you really want to cancel writing?\n"
+"WARNING: Canceling can corrupt your data on disk"
+msgstr "您確定要取消寫入嗎？警告: 取消可能會破壞您磁碟中的資料"
 
-#: dialog.cc:75 dialog.cc:225 dialog.cc:566 dialog.cc:812
-msgid "&Backwards"
-msgstr "往回(&B)"
+#: hexeditorwidget.cc:2387
+msgid "Do you really want to cancel inserting?"
+msgstr "您確定要取消插入嗎?"
 
-#: dialog.cc:77 dialog.cc:816
-msgid "&Stay visible"
-msgstr "保持可見(&S)"
+#: hexeditorwidget.cc:2392
+msgid "Do you really want to cancel printing?"
+msgstr "您確定要取消列印嗎?"
 
-#: dialog.cc:194
-msgid "Fo&rmat:"
-msgstr "格式(&R):"
+#: hexeditorwidget.cc:2397
+msgid "Do you really want to cancel encoding?"
+msgstr "您確定要取消編碼嗎?"
 
-#: dialog.cc:209 dialog.cc:520
-msgid "F&ind:"
-msgstr "找尋(&I):"
+#: hexeditorwidget.cc:2402
+msgid "Do you really want to cancel string scanning?"
+msgstr "您確定要取消字串掃描嗎?"
 
-#: dialog.cc:227 dialog.cc:568 dialog.cc:814
-msgid "&In selection"
-msgstr "在區域中(&I)"
+#: hexeditorwidget.cc:2407
+msgid "Do you really want to cancel exporting?"
+msgstr "您確定要取消匯出嗎?"
 
-#: dialog.cc:229
-msgid "&Use navigator"
-msgstr "使用領航員(&U)"
+#: hexeditorwidget.cc:2411
+msgid "Collect document statistics"
+msgstr "收集文件資訊"
 
-#: dialog.cc:231 dialog.cc:572
-msgid "Ignore c&ase"
-msgstr "忽略大小寫(&A)"
+#: hexeditorwidget.cc:2412
+msgid "Do you really want to cancel document scanning?"
+msgstr "您確定要取消文件掃描嗎?"
 
-#: dialog.cc:348
-msgid "Find (Navigator)"
-msgstr "找尋 (領航員)"
+#: hexeditorwidget.cc:2432
+msgid "Could not finish operation.\n"
+msgstr "無法完成操作.\n"
 
-#: dialog.cc:349
-msgid "New &Key"
-msgstr "新值(&K)"
+#: hexerror.cc:32
+msgid "No data"
+msgstr "無資料"
 
-#: dialog.cc:350
-msgid "&Next"
-msgstr "下一個(&N)"
+#: hexerror.cc:33
+msgid "Insufficient memory"
+msgstr "記憶體不足"
 
-#: dialog.cc:362
-msgid "Searching for:"
-msgstr "找尋目標:"
+#: hexerror.cc:34
+msgid "List is full"
+msgstr "列表已滿"
 
-#: dialog.cc:504
-msgid "Fo&rmat (find):"
-msgstr "格式(找尋)(&R):"
+#: hexerror.cc:35
+msgid "Read operation failed"
+msgstr "讀取操作失敗"
 
-#: dialog.cc:533
-msgid "For&mat (replace):"
-msgstr "格式(取代)(&M):"
+#: hexerror.cc:36
+msgid "Write operation failed"
+msgstr "寫入操作失敗"
 
-#: dialog.cc:550
-msgid "Rep&lace:"
-msgstr "取代(&L):"
+#: hexerror.cc:37
+msgid "Empty argument"
+msgstr "空白的參數"
 
-#: dialog.cc:570
-msgid "&Prompt"
-msgstr "提示(&P)"
+#: hexerror.cc:38
+msgid "Illegal argument"
+msgstr "不合法的參數"
 
-#: dialog.cc:657
-msgid "Source and target values can not be equal."
-msgstr "來源與目標質不能相同."
+#: hexerror.cc:39
+msgid "Null pointer argument"
+msgstr "空白的指標參數"
 
-#: dialog.cc:682
-msgid "Replace &All"
-msgstr "全部取代(&A)"
+#: hexerror.cc:40
+msgid "Wrap buffer"
+msgstr "跳躍緩衝區"
 
-#: dialog.cc:683
-msgid "Do Not Replace"
-msgstr "不要取代"
+#: hexerror.cc:41
+msgid "No match"
+msgstr "不符合"
 
-#: dialog.cc:691
-msgid "Replace marked data at cursor position?"
-msgstr "取代在游標位置的標記資料嗎?"
+#: hexerror.cc:42
+msgid "No data is selected"
+msgstr "沒有資料被選取"
 
-#: dialog.cc:761
-msgid "Binary Filter"
-msgstr "二進位過濾器"
+#: hexerror.cc:43
+msgid "Empty document"
+msgstr "空白的文件"
 
-#: dialog.cc:780
-msgid "O&peration:"
-msgstr "操作(&P):"
+#: hexerror.cc:44
+msgid "No active document"
+msgstr "沒有作用中的文件"
 
-#: dialog.cc:855
-msgid "Fo&rmat (operand):"
-msgstr "格式(運算子)(&R):"
+#: hexerror.cc:45
+msgid "No data is marked"
+msgstr "沒有資料被標記"
 
-#: dialog.cc:871
-msgid "O&perand:"
-msgstr "運算子(&P):"
+#: hexerror.cc:46
+msgid "Document is write protected"
+msgstr "文件是防寫保護的"
 
-#: dialog.cc:891
-msgid "Swap rule"
-msgstr "交換規則"
+#: hexerror.cc:47
+msgid "Document is resize protected"
+msgstr "文件是改變大小保護的"
 
-#: dialog.cc:903
-msgid "&Reset"
-msgstr "重)(&R)"
+#: hexerror.cc:48
+msgid "Operation was stopped"
+msgstr "操作被停止"
 
-#: dialog.cc:929
-msgid "&Group size [bytes]"
-msgstr "群組大小(位元組)(&G)"
+#: hexerror.cc:49
+msgid "Illegal mode"
+msgstr "不合法的模式"
 
-#: dialog.cc:941
-msgid "S&hift size [bits]"
-msgstr "位移大小(位元)(&H)"
+#: hexerror.cc:50
+msgid "Program is busy, try again later"
+msgstr "程式忙碌中, 請稍候再試"
 
-#: dialog.cc:985
-msgid "Shift size is zero."
-msgstr "位移大小為 0."
+#: hexerror.cc:51
+msgid "Value is not within valid range"
+msgstr "數值不在合法範圍內"
 
-#: dialog.cc:994
-msgid "Swap rule does not define any swapping."
-msgstr "交換規則未定義任何交換."
+#: hexerror.cc:52
+msgid "Operation was aborted"
+msgstr "操作被放棄"
 
-#: dialog.cc:1070
-msgid "Insert Pattern"
-msgstr "插入樣式"
+#: hexerror.cc:53
+msgid "File could not be opened for writing"
+msgstr "檔案無法被開啟以供寫入"
 
-#: dialog.cc:1089
-msgid "&Size:"
-msgstr "大小(&S):"
+#: hexerror.cc:54
+msgid "File could not be opened for reading"
+msgstr "檔案無法被開啟以供讀取"
 
-#: dialog.cc:1102
-msgid "Fo&rmat (pattern):"
-msgstr "格式(樣式)(&R):"
+#: hexerror.cc:60
+msgid "Unknown error"
+msgstr "未知的錯誤"
 
-#: dialog.cc:1118
-msgid "&Pattern:"
-msgstr "樣式(&P):"
+#: hexmanagerwidget.cc:136
+msgid "Conversion"
+msgstr "轉換"
 
-#: dialog.cc:1127
-msgid "&Offset:"
-msgstr "位移(&O):"
+#: hextoolwidget.cc:44
+msgid "Signed 8 bit:"
+msgstr "有符號 8 位元:"
 
-#: dialog.cc:1142
-msgid "R&epeat pattern"
-msgstr "重複樣式(&E)"
+#: hextoolwidget.cc:44
+msgid "Unsigned 8 bit:"
+msgstr "無符號 8 位元:"
 
-#: dialog.cc:1144
-msgid "&Insert on cursor position"
-msgstr "在游標位置插入(&I)"
+#: hextoolwidget.cc:45
+msgid "Signed 16 bit:"
+msgstr "有符號 16 位元:"
 
-#: dialog.cc:1284
-msgid "Your request can not be processed."
-msgstr "您的要求無法被執行."
+#: hextoolwidget.cc:45
+msgid "Unsigned 16 bit:"
+msgstr "無符號 16 位元:"
 
-#: dialog.cc:1288
-msgid "Examine argument(s) and try again."
-msgstr "檢查參數並再試一次."
+#: hextoolwidget.cc:50
+msgid "Signed 32 bit:"
+msgstr "有符號 32 位元:"
 
-#: dialog.cc:1294
-msgid "Invalid argument(s)"
-msgstr "錯誤的參數"
+#: hextoolwidget.cc:50
+msgid "Unsigned 32 bit:"
+msgstr "無符號 32 位元:"
 
-#: dialog.cc:1303
-msgid "You must specify a destination file."
-msgstr "您必須指定一個目標檔案."
+#: hextoolwidget.cc:51
+msgid "32 bit float:"
+msgstr "32 位元浮點數:"
 
-#: dialog.cc:1313
-msgid "You have specified an existing folder."
-msgstr "您指定了已存在的資料夾。"
+#: hextoolwidget.cc:51
+msgid "64 bit float:"
+msgstr "64 位元浮點數:"
 
-#: dialog.cc:1320
-msgid "You do not have write permission to this file."
-msgstr "您沒有這個檔案的寫入權限."
+#: hextoolwidget.cc:96
+msgid "Show little endian decoding"
+msgstr "顯示小型結尾解碼"
 
-#: dialog.cc:1325
-msgid ""
-"You have specified an existing file.\n"
-"Overwrite current file?"
-msgstr ""
-"您指定了一個已經存在的檔案.\n"
-"是否蓋寫?"
+#: hextoolwidget.cc:110
+msgid "Show unsigned as hexadecimal"
+msgstr "顯示無符號數為十六進位"
 
-#: dialog.cc:1405
-msgid "Regular Text"
-msgstr "一般文字:"
+#: hextoolwidget.cc:122
+msgid "Stream length:"
+msgstr "串列長度:"
 
-#: dialog.cc:1416
-msgid "operand AND data"
-msgstr "操作子 AND 資料"
+#: hextoolwidget.cc:127
+msgid "Fixed 8 Bit"
+msgstr "固定 8 位元:"
 
-#: dialog.cc:1417
-msgid "operand OR data"
-msgstr "操作子 OR 資料"
+#: hextoolwidget.cc:132
+msgid "Bit Window"
+msgstr "位元視窗:"
 
-#: dialog.cc:1418
-msgid "operand XOR data"
-msgstr "操作子 XOR 資料"
+#: hextoolwidget.cc:132
+msgid "Bits Window"
+msgstr "位元視窗:"
 
-#: dialog.cc:1419
-msgid "INVERT data"
-msgstr "反轉資料"
+#: hexviewwidget.cc:1102 stringdialog.cc:95
+msgid "Offset"
+msgstr "位移"
 
-#: dialog.cc:1420
-msgid "REVERSE data"
-msgstr "逆轉資料"
+#: hexviewwidget.cc:1128
+msgid "Remove Bookmark"
+msgstr "移除書籤"
 
-#: dialog.cc:1421
-msgid "ROTATE data"
-msgstr "旋轉資料"
+#: hexviewwidget.cc:1158
+msgid "Replace Bookmark"
+msgstr "取代書籤"
 
-#: dialog.cc:1422
-msgid "SHIFT data"
-msgstr "移動資料"
+#: main.cc:34
+msgid "TDE hex editor"
+msgstr "TDE 十六進位編輯器"
 
-#: dialog.cc:1423
-msgid "Swap Individual Bits"
-msgstr "交換獨立位元"
+#: main.cc:40
+msgid "Jump to 'offset'"
+msgstr "跳到 '位移'"
 
-#: searchbar.cc:79
-msgid "Backwards"
-msgstr "往回"
+#: main.cc:41
+msgid "File(s) to open"
+msgstr "要開啟的檔案"
 
-#: searchbar.cc:80
-msgid "Ignore case"
-msgstr "忽略大小寫"
+#: main.cc:49
+msgid "KHexEdit"
+msgstr "KHexEdit"
 
-#: chartabledialog.cc:37
-msgid "Character Table"
-msgstr "字元表"
+#: main.cc:54
+msgid ""
+"\n"
+"This program uses modified code and techniques from other TDE programs,\n"
+"specifically kwrite, tdeiconedit and ksysv. Credit goes to authors\n"
+"and maintainers.\n"
+"\n"
+"Leon Lessing, leon@lrlabs.com, has made parts of the bit swapping\n"
+"functionality.\n"
+"\n"
+"Craig Graham, c_graham@hinge.mistral.co.uk, has made parts of\n"
+"the bit stream functionality of the conversion field.\n"
+"\n"
+"Dima Rogozin, dima@mercury.co.il, has extended the string dialog\n"
+"list capabilities.\n"
+"\n"
+"Edward Livingston-Blade, sbcs@bigfoot.com, has given me very good\n"
+"reports which removed some nasty bugs.\n"
+msgstr ""
+"\n"
+"這個程式使用了存其他 TDE 程式改來的程式碼,\n"
+"尤其是 kwrite, tdeiconedit 與 ksysv. \n"
+"著作屬於作者與維護者.\n"
+"\n"
+"Leon Lessing, leon@lrlabs.com, has made parts of the bit swapping\n"
+"functionality.\n"
+"\n"
+"Craig Graham, c_graham@hinge.mistral.co.uk, has made parts of\n"
+"the bit stream functionality of the conversion field.\n"
+"\n"
+"Dima Rogozin, dima@mercury.co.il, has extended the string dialog\n"
+"list capabilities.\n"
+"\n"
+"Edward Livingston-Blade, sbcs@bigfoot.com, has given me very good\n"
+"reports which removed some nasty bugs.\n"
 
-#: chartabledialog.cc:70
-msgid "Insert this number of characters:"
-msgstr "插入這個邊號的字元:"
+#: optiondialog.cc:68
+msgid "Configure"
+msgstr ""
 
 #: optiondialog.cc:105
 msgid "Layout"
@@ -1534,6 +1473,10 @@ msgstr "分隔器"
 msgid "Grid Lines"
 msgstr "格線"
 
+#: optiondialog.cc:375
+msgid "Font"
+msgstr ""
+
 #: optiondialog.cc:376
 msgid "Font Selection (editor can only use a fixed font)"
 msgstr "文字選擇 (編輯器僅能使用固定字型)"
@@ -1550,6 +1493,11 @@ msgstr "KHexEdit 編輯器字型"
 msgid "&Map non printable characters to:"
 msgstr "對應不可列印字元為(&M):"
 
+#: optiondialog.cc:428
+#, fuzzy
+msgid "Files"
+msgstr "設定檔案"
+
 #: optiondialog.cc:428
 msgid "File Management"
 msgstr "檔案管理"
@@ -1588,8 +1536,8 @@ msgstr "離開時不要儲存\"最近使用的文件列表\"(&S)"
 
 #: optiondialog.cc:492
 msgid ""
-"Clicking this check box makes KHexEdit forget his recent document list when the "
-"program is closed.\n"
+"Clicking this check box makes KHexEdit forget his recent document list when "
+"the program is closed.\n"
 "Note: it will not erase any document of the recent document list created by "
 "TDE."
 msgstr ""
@@ -1609,6 +1557,10 @@ msgstr ""
 "選取這個選項會讓 KHexEdit 丟棄它最近編輯文件的紀錄。\n"
 "注意: 它不會刪除 TDE 所產生的最近文件紀錄。"
 
+#: optiondialog.cc:520
+msgid "Miscellaneous"
+msgstr ""
+
 #: optiondialog.cc:520
 msgid "Various Properties"
 msgstr "其他的屬性"
@@ -1665,391 +1617,519 @@ msgstr "頁數限制(&T):"
 msgid "&Undo limit:"
 msgstr "復原限制(&U)"
 
-#: hexviewwidget.cc:1128
-msgid "Remove Bookmark"
-msgstr "移除書籤"
+#: parts/kpart/khepart.cpp:92
+msgid "&Value Coding"
+msgstr "數值表示(&V)"
 
-#: hexviewwidget.cc:1158
-msgid "Replace Bookmark"
-msgstr "取代書籤"
+#: parts/kpart/khepart.cpp:94 toplevel.cc:180
+msgid "&Hexadecimal"
+msgstr "十六進位制(&H)"
 
-#: hextoolwidget.cc:44
-msgid "Signed 8 bit:"
-msgstr "有符號 8 位元:"
+#: parts/kpart/khepart.cpp:95 toplevel.cc:182
+msgid "&Decimal"
+msgstr "十進位制(&D)"
 
-#: hextoolwidget.cc:44
-msgid "Unsigned 8 bit:"
-msgstr "無符號 8 位元:"
+#: parts/kpart/khepart.cpp:96 toplevel.cc:184
+msgid "&Octal"
+msgstr "八進位制(&O)"
 
-#: hextoolwidget.cc:45
-msgid "Signed 16 bit:"
-msgstr "有符號 16 位元:"
+#: parts/kpart/khepart.cpp:97 toplevel.cc:186
+msgid "&Binary"
+msgstr "二進位制(&B)"
 
-#: hextoolwidget.cc:45
-msgid "Unsigned 16 bit:"
-msgstr "無符號 16 位元:"
+#: parts/kpart/khepart.cpp:102
+msgid "&Char Encoding"
+msgstr "字元編碼(&C)"
 
-#: hextoolwidget.cc:50
-msgid "Signed 32 bit:"
-msgstr "有符號 32 位元:"
+#: parts/kpart/khepart.cpp:106
+msgid "Show &Unprintable Chars (<32)"
+msgstr "顯示控制字元(ASCII<32)(&U)"
 
-#: hextoolwidget.cc:50
-msgid "Unsigned 32 bit:"
-msgstr "無符號 32 位元:"
+#: parts/kpart/khepart.cpp:112
+msgid "&Resize Style"
+msgstr "調整大小型態(&R)"
 
-#: hextoolwidget.cc:51
-msgid "32 bit float:"
-msgstr "32 位元浮點數:"
+#: parts/kpart/khepart.cpp:114
+msgid "&No Resize"
+msgstr "不調整(&N)"
 
-#: hextoolwidget.cc:51
-msgid "64 bit float:"
-msgstr "64 位元浮點數:"
+#: parts/kpart/khepart.cpp:115
+msgid "&Lock Groups"
+msgstr "鎖定群組(&L)"
 
-#: hextoolwidget.cc:96
-msgid "Show little endian decoding"
-msgstr "顯示小型結尾解碼"
+#: parts/kpart/khepart.cpp:116
+msgid "&Full Size Usage"
+msgstr "使用完整大小(&F)"
 
-#: hextoolwidget.cc:110
-msgid "Show unsigned as hexadecimal"
-msgstr "顯示無符號數為十六進位"
+#: parts/kpart/khepart.cpp:120
+msgid "&Line Offset"
+msgstr "行位移(&L)"
+
+#: parts/kpart/khepart.cpp:123
+msgid "&Columns"
+msgstr "欄位(&C)"
+
+#: parts/kpart/khepart.cpp:125
+msgid "&Values Column"
+msgstr "數值欄位(&V)"
+
+#: parts/kpart/khepart.cpp:126
+msgid "&Chars Column"
+msgstr "字元欄位(&C)"
+
+#: parts/kpart/khepart.cpp:127
+msgid "&Both Columns"
+msgstr "兩個欄位(&B)"
+
+#: parts/kpart/khepartfactory.cpp:30
+msgid "KHexEdit2Part"
+msgstr "KHexEdit2Part"
+
+#: parts/kpart/khepartfactory.cpp:31
+msgid "Embedded hex editor"
+msgstr "嵌入式十六進位編輯器"
+
+#: parts/kpart/khepartfactory.cpp:36
+msgid "Author"
+msgstr "作者"
+
+#: printdialogpage.cc:38
+msgid "Page Layout"
+msgstr "頁面編排"
+
+#: printdialogpage.cc:59
+msgid "Margins [millimeter]"
+msgstr "邊界 [公厘]"
+
+#: printdialogpage.cc:72
+msgid "&Top:"
+msgstr "頂端(&T):"
+
+#: printdialogpage.cc:73
+msgid "&Bottom:"
+msgstr "底部(&B):"
+
+#: printdialogpage.cc:74
+msgid "&Left:"
+msgstr "左邊(&L):"
+
+#: printdialogpage.cc:75
+msgid "&Right:"
+msgstr "右邊(&R):"
+
+#: printdialogpage.cc:102
+msgid "Draw h&eader above text"
+msgstr "在文字上繪製標頭"
+
+#: printdialogpage.cc:118
+msgid "Left:"
+msgstr "左邊(&L):"
+
+#: printdialogpage.cc:119
+msgid "Center:"
+msgstr "中央:"
+
+#: printdialogpage.cc:120
+msgid "Right:"
+msgstr "右邊:"
+
+#: printdialogpage.cc:121
+msgid "Border:"
+msgstr "邊框："
+
+#: printdialogpage.cc:125
+msgid "Date & Time"
+msgstr "日期與時間"
+
+#: printdialogpage.cc:131
+msgid "Single Line"
+msgstr "單行"
+
+#: printdialogpage.cc:132
+msgid "Rectangle"
+msgstr "長方形"
+
+#: printdialogpage.cc:164
+msgid "Draw &footer below text"
+msgstr "在文字下繪製註腳"
+
+#: searchbar.cc:63 toplevel.cc:862
+msgid "Hex"
+msgstr "Hex"
+
+#: searchbar.cc:63 toplevel.cc:866
+msgid "Dec"
+msgstr "Dec"
+
+#: searchbar.cc:63 toplevel.cc:870
+msgid "Oct"
+msgstr "Oct"
+
+#: searchbar.cc:63 toplevel.cc:874
+msgid "Bin"
+msgstr "Bin"
 
-#: hextoolwidget.cc:122
-msgid "Stream length:"
-msgstr "串列長度:"
+#: searchbar.cc:64 toplevel.cc:878
+msgid "Txt"
+msgstr "文字"
 
-#: hextoolwidget.cc:127
-msgid "Fixed 8 Bit"
-msgstr "固定 8 位元:"
+#: searchbar.cc:79
+msgid "Backwards"
+msgstr "往回"
 
-#: hextoolwidget.cc:132
-msgid "Bit Window"
-msgstr "位元視窗:"
+#: searchbar.cc:80
+msgid "Ignore case"
+msgstr "忽略大小寫"
 
-#: hextoolwidget.cc:132
-msgid "Bits Window"
-msgstr "位元視窗:"
+#: statusbarprogress.cc:268
+msgid "%1... %2 of %3"
+msgstr "%1... %2 之 %3"
 
-#: hexbuffer.cc:1925 hexbuffer.cc:4832
-msgid "Page %1 of %2"
-msgstr "第 %1 頁, 共 %2 頁"
+#: statusbarprogress.cc:272
+msgid "%1... %2%"
+msgstr "%1... %2%"
 
-#: hexbuffer.cc:2852
-msgid "to"
-msgstr "到"
+#: stringdialog.cc:38 stringdialog.cc:201
+msgid "Extract Strings"
+msgstr "取得字串"
 
-#: hexbuffer.cc:4853 hexbuffer.cc:4858
-msgid "Next"
-msgstr "下一個"
+#: stringdialog.cc:57
+msgid "&Minimum length:"
+msgstr "最小長度(&M):"
 
-#: hexbuffer.cc:4863 hexbuffer.cc:4868
-msgid "Previous"
-msgstr "前一個"
+#: stringdialog.cc:66
+msgid "&Filter:"
+msgstr "過濾器(&F):"
 
-#: hexbuffer.cc:4886
-msgid "Generated by khexedit"
-msgstr "由 KHexEdit 產生"
+#: stringdialog.cc:71
+msgid "&Use"
+msgstr "使用(&U)"
 
-#: hexerror.cc:32
-msgid "No data"
-msgstr "無資料"
+#: stringdialog.cc:80
+msgid "&Ignore case"
+msgstr "忽略大小寫(&I)"
 
-#: hexerror.cc:33
-msgid "Insufficient memory"
-msgstr "記憶體不足"
+#: stringdialog.cc:84
+msgid "Show offset as &decimal"
+msgstr "十進位顯示位移(&D)"
 
-#: hexerror.cc:34
-msgid "List is full"
-msgstr "列表已滿"
+#: stringdialog.cc:96
+msgid "String"
+msgstr "字串"
 
-#: hexerror.cc:35
-msgid "Read operation failed"
-msgstr "讀取操作失敗"
+#: stringdialog.cc:106
+msgid "Number of strings:"
+msgstr "字串數目:"
 
-#: hexerror.cc:36
-msgid "Write operation failed"
-msgstr "寫入操作失敗"
+#: stringdialog.cc:114
+msgid "Displayed:"
+msgstr "顯示:"
 
-#: hexerror.cc:37
-msgid "Empty argument"
-msgstr "空白的參數"
+#: stringdialog.cc:197
+msgid ""
+"The filter expression you have specified is illegal. You must specify a "
+"valid regular expression.\n"
+"Continue without filter?"
+msgstr ""
+"您指定的過濾敘述是不合法的. 您必須指定一個有效的正規表示語句.\n"
+"不過濾而繼續執行?"
 
-#: hexerror.cc:38
-msgid "Illegal argument"
-msgstr "不合法的參數"
+#: toplevel.cc:133
+msgid "&Insert..."
+msgstr "插入(&I)..."
 
-#: hexerror.cc:39
-msgid "Null pointer argument"
-msgstr "空白的指標參數"
+#: toplevel.cc:143
+msgid "E&xport..."
+msgstr "匯出(&X)..."
 
-#: hexerror.cc:40
-msgid "Wrap buffer"
-msgstr "跳躍緩衝區"
+#: toplevel.cc:145
+msgid "&Cancel Operation"
+msgstr "取消操作(&C)"
 
-#: hexerror.cc:41
-msgid "No match"
-msgstr "不符合"
+#: toplevel.cc:147
+msgid "&Read Only"
+msgstr "唯讀(&R)"
 
-#: hexerror.cc:42
-msgid "No data is selected"
-msgstr "沒有資料被選取"
+#: toplevel.cc:149
+msgid "&Allow Resize"
+msgstr "允許改變大小(&A)"
 
-#: hexerror.cc:43
-msgid "Empty document"
-msgstr "空白的文件"
+#: toplevel.cc:151
+msgid "N&ew Window"
+msgstr "新視窗(&E)"
 
-#: hexerror.cc:44
-msgid "No active document"
-msgstr "沒有作用中的文件"
+#: toplevel.cc:153
+msgid "Close &Window"
+msgstr "關閉視窗(&W)"
 
-#: hexerror.cc:45
-msgid "No data is marked"
-msgstr "沒有資料被標記"
+#: toplevel.cc:168
+msgid "&Goto Offset..."
+msgstr "跳到位移(&G)..."
 
-#: hexerror.cc:46
-msgid "Document is write protected"
-msgstr "文件是防寫保護的"
+#: toplevel.cc:170
+msgid "&Insert Pattern..."
+msgstr "插入樣式(&I)..."
 
-#: hexerror.cc:47
-msgid "Document is resize protected"
-msgstr "文件是改變大小保護的"
+#: toplevel.cc:173
+msgid "Copy as &Text"
+msgstr "以文字拷貝(&T)"
 
-#: hexerror.cc:48
-msgid "Operation was stopped"
-msgstr "操作被停止"
+#: toplevel.cc:175
+msgid "Paste into New &File"
+msgstr "貼到新檔案(&F)"
 
-#: hexerror.cc:49
-msgid "Illegal mode"
-msgstr "不合法的模式"
+#: toplevel.cc:177
+msgid "Paste into New &Window"
+msgstr "些到新視窗(&W)"
 
-#: hexerror.cc:50
-msgid "Program is busy, try again later"
-msgstr "程式忙碌中, 請稍候再試"
+#: toplevel.cc:188
+msgid "&Text"
+msgstr "文字(&T)"
 
-#: hexerror.cc:51
-msgid "Value is not within valid range"
-msgstr "數值不在合法範圍內"
+#: toplevel.cc:196
+msgid "Show O&ffset Column"
+msgstr "顯示位移欄位(&F)"
 
-#: hexerror.cc:52
-msgid "Operation was aborted"
-msgstr "操作被放棄"
+#: toplevel.cc:198
+msgid "Show Te&xt Field"
+msgstr "顯示文字區域(&X)"
 
-#: hexerror.cc:53
-msgid "File could not be opened for writing"
-msgstr "檔案無法被開啟以供寫入"
+#: toplevel.cc:200
+msgid "Off&set as Decimal"
+msgstr "十進位顯示位移(&s)"
 
-#: hexerror.cc:54
-msgid "File could not be opened for reading"
-msgstr "檔案無法被開啟以供讀取"
+#: toplevel.cc:202
+msgid "&Upper Case (Data)"
+msgstr "大寫 (資料)(&U)"
 
-#: hexerror.cc:60
-msgid "Unknown error"
-msgstr "未知的錯誤"
+#: toplevel.cc:204
+msgid "Upper &Case (Offset)"
+msgstr "大寫 (位移)(&C)"
 
-#: conversion.cc:48
+#: toplevel.cc:207
 msgid ""
-"_: Default encoding\n"
-"Default"
-msgstr "預設值"
+"_: &Default encoding\n"
+"&Default"
+msgstr "預設值(&D)"
 
-#: conversion.cc:49
-msgid "EBCDIC"
-msgstr "EBCDIC"
+#: toplevel.cc:209
+msgid "US-&ASCII (7 bit)"
+msgstr "US-ASCII (7 位元)(&A)"
 
-#: conversion.cc:50
-msgid "US-ASCII (7 bit)"
-msgstr "US-ASCII (7 位元)"
+#: toplevel.cc:211
+msgid "&EBCDIC"
+msgstr "EBCDIC(&E)"
 
-#: conversion.cc:51
-msgid "Unknown"
-msgstr "未知"
+#: toplevel.cc:219
+msgid "&Extract Strings..."
+msgstr "取得字串(&E)..."
 
-#: exportdialog.cc:35 exportdialog.cc:493 exportdialog.cc:537
-#: exportdialog.cc:566 exportdialog.cc:634
-msgid "Export Document"
-msgstr "匯出文件"
+#: toplevel.cc:223
+msgid "&Binary Filter..."
+msgstr "二進位過濾器(&B)..."
 
-#: exportdialog.cc:40
-msgid "Destination"
-msgstr "目標"
+#: toplevel.cc:225
+msgid "&Character Table"
+msgstr "字元表 (&C)"
 
-#: exportdialog.cc:158
-msgid "Plain Text"
-msgstr "純文字"
+#: toplevel.cc:227
+msgid "C&onverter"
+msgstr "轉換器 (&O)"
 
-#: exportdialog.cc:159
-msgid "HTML Tables"
-msgstr "HTML 表格"
+#: toplevel.cc:229
+msgid "&Statistics"
+msgstr "統計資料 (&S)"
+
+#: toplevel.cc:234
+msgid "&Replace Bookmark"
+msgstr "取代書籤(&R)"
 
-#: exportdialog.cc:160
-msgid "Rich Text (RTF)"
-msgstr "Rich Text(RTF)"
+#: toplevel.cc:236
+msgid "R&emove Bookmark"
+msgstr "移除書籤(&E)"
 
-#: exportdialog.cc:161
-msgid "C Array"
-msgstr "C 陣列"
+#: toplevel.cc:238
+msgid "Re&move All"
+msgstr "全部移除(&M)"
 
-#: exportdialog.cc:169
-msgid "&Format:"
-msgstr "格式(&F):"
+#: toplevel.cc:240
+msgid "Goto &Next Bookmark"
+msgstr "移到下一個書籤(&N)"
 
-#: exportdialog.cc:177
-msgid "&Destination:"
-msgstr "目標(&D):"
+#: toplevel.cc:243
+msgid "Goto &Previous Bookmark"
+msgstr "移到前一個書籤(&P)"
 
-#: exportdialog.cc:181
-msgid "(Package folder)"
-msgstr "(套件目錄)"
+#: toplevel.cc:249
+msgid "Show F&ull Path"
+msgstr "顯示完整路徑(&U)"
 
-#: exportdialog.cc:191
-msgid "Choose..."
-msgstr "選擇..."
+#: toplevel.cc:252 toplevel.cc:262 toplevel.cc:272
+msgid "&Hide"
+msgstr "隱藏(&H)"
 
-#: exportdialog.cc:202
-msgid "Export Range"
-msgstr "匯出範圍"
+#: toplevel.cc:254 toplevel.cc:274
+msgid "&Above Editor"
+msgstr "上面編輯器(&A)"
 
-#: exportdialog.cc:210
-msgid "&Everything"
-msgstr "全部(&E)"
+#: toplevel.cc:256 toplevel.cc:276
+msgid "&Below Editor"
+msgstr "下面編輯器(&B)"
 
-#: exportdialog.cc:215
-msgid "&Selection"
-msgstr "選擇的區域(&S)"
+#: toplevel.cc:264
+msgid "&Floating"
+msgstr "浮動(&F)"
 
-#: exportdialog.cc:220
-msgid "&Range"
-msgstr "範圍(&R)"
+#: toplevel.cc:266
+msgid "&Embed in Main Window"
+msgstr "嵌入主視窗(&E)"
 
-#: exportdialog.cc:229
-msgid "&From offset:"
-msgstr "從位移(&F):"
+#: toplevel.cc:293
+msgid "Drag document"
+msgstr "拖曳文件"
 
-#: exportdialog.cc:235
-msgid "&To offset:"
-msgstr "到位移(&T):"
+#: toplevel.cc:294
+msgid "Drag Document"
+msgstr "拖曳文件"
 
-#: exportdialog.cc:280 exportdialog.cc:374
-msgid "No options for this format."
-msgstr "這個格式沒有選項"
+#: toplevel.cc:304
+msgid "Toggle write protection"
+msgstr "切換寫入保護"
 
-#: exportdialog.cc:296
-msgid "HTML Options (one table per page)"
-msgstr "HTML 選項. (每頁一個表格)"
+#: toplevel.cc:329
+msgid "Selection: 0000:0000 0000:0000"
+msgstr "選取: 0000:0000 0000:0000"
 
-#: exportdialog.cc:317
-msgid "&Lines per table:"
-msgstr "表格行數(&L):"
+#: toplevel.cc:331
+msgid "M"
+msgstr "M"
 
-#: exportdialog.cc:325
-msgid "Filename &prefix (in package):"
-msgstr "檔名前置(套件中)(&P):"
+#: toplevel.cc:332 toplevel.cc:993
+msgid "OVR"
+msgstr "取代"
 
-#: exportdialog.cc:331
-msgid "Filename with Path"
-msgstr "含路徑的檔名"
+#: toplevel.cc:333
+msgid "Size: FFFFFFFFFF"
+msgstr "大小: FFFFFFFFFF"
 
-#: exportdialog.cc:339
-msgid "Header &above text:"
-msgstr "標頭文字(&A):"
+#: toplevel.cc:334
+msgid "Offset: FFFFFFFFFF-F"
+msgstr "位移: FFFFFFFFFF-F"
 
-#: exportdialog.cc:347
-msgid "&Footer below text:"
-msgstr "註腳文字(&F):"
+#: toplevel.cc:335
+msgid "FFF"
+msgstr "FFF"
 
-#: exportdialog.cc:351
-msgid "Link \"index.html\" to &table of contents file"
-msgstr "將 \"index.html\" 連結到內容表檔案(&T)"
+#: toplevel.cc:336 toplevel.cc:893
+msgid "RW"
+msgstr "RW"
 
-#: exportdialog.cc:355
-msgid "&Include navigator bar"
-msgstr ")含領航列(&I)"
+#: toplevel.cc:346 toplevel.cc:750
+msgid "Offset:"
+msgstr "位移:"
 
-#: exportdialog.cc:359
-msgid "&Use black and white only"
-msgstr "僅使用黑白(&U)"
+#: toplevel.cc:347
+msgid "Size:"
+msgstr "大小:"
 
-#: exportdialog.cc:388
-msgid "C Array Options"
-msgstr "C 陣列選項"
+#: toplevel.cc:536
+#, c-format
+msgid "Non local recent file: %1"
+msgstr "最近編輯的非本地端檔案: %1"
 
-#: exportdialog.cc:402
-msgid "Array name:"
-msgstr "陣列名稱:"
+#: toplevel.cc:546
+msgid "Can not create new window.\n"
+msgstr "無法建立新視窗.\n"
 
-#: exportdialog.cc:407
-msgid "char"
-msgstr "字元"
+#: toplevel.cc:582
+msgid ""
+"There are windows with unsaved modified documents. If you quit now, these "
+"modifications will be lost."
+msgstr "視窗內有未儲存但變更過的文件。如果您現在離開，所有的變更將會消失。"
 
-#: exportdialog.cc:408
-msgid "unsigned char"
-msgstr "無符號字元"
+#: toplevel.cc:791
+#, c-format
+msgid "Size: %1"
+msgstr "大小: %1"
 
-#: exportdialog.cc:409
-msgid "short"
-msgstr "短數"
+#: toplevel.cc:893
+msgid "R"
+msgstr "R"
 
-#: exportdialog.cc:410
-msgid "unsigned short"
-msgstr "無符號短數"
+#: toplevel.cc:925
+#, c-format
+msgid "Offset: %1"
+msgstr "位移: %1"
 
-#: exportdialog.cc:411
-msgid "int"
-msgstr "整數"
+#: toplevel.cc:993
+msgid "INS"
+msgstr "插入"
 
-#: exportdialog.cc:412
-msgid "unsigned int"
-msgstr "無符號整數"
+#: toplevel.cc:1024 toplevel.cc:1189
+#, c-format
+msgid "Encoding: %1"
+msgstr "編碼方式: %1"
 
-#: exportdialog.cc:413
-msgid "float"
-msgstr "浮點數"
+#: toplevel.cc:1172
+msgid "Selection:"
+msgstr "選取:"
 
-#: exportdialog.cc:414
-msgid "double"
-msgstr "倍精度數"
+#: khexeditui.rc:10
+#, no-c-format
+msgid "Permissions"
+msgstr "權限"
 
-#: exportdialog.cc:419
-msgid "Element type:"
-msgstr "元素類別:"
+#: khexeditui.rc:19
+#, no-c-format
+msgid "Spec&ial"
+msgstr "特殊(&I)"
 
-#: exportdialog.cc:427
-msgid "Elements per line:"
-msgstr "每行元素數:"
+#: khexeditui.rc:42
+#, no-c-format
+msgid "Document &Encoding"
+msgstr "文件編碼方式(&E)"
 
-#: exportdialog.cc:431
-msgid "Print unsigned values as hexadecimal"
-msgstr "以十六進位印出無符號數值"
+#: khexeditui.rc:67
+#, no-c-format
+msgid "&Documents"
+msgstr "文件(&D)"
 
-#: exportdialog.cc:535
-msgid "The filename prefix can not contain empty letters or punctuation marks."
-msgstr "檔名前置不能有空白或標點符號。"
+#: khexeditui.rc:73
+#, no-c-format
+msgid "&Document Tabs"
+msgstr "文件定位(&D)"
 
-#: exportdialog.cc:561
-msgid "This format is not yet supported."
-msgstr "抱歉, 這個格式目前尚不支援。"
+#: khexeditui.rc:78
+#, no-c-format
+msgid "Conversion &Field"
+msgstr "轉換區域(&F)"
 
-#: exportdialog.cc:638
-msgid "You must specify a destination."
-msgstr "您必須指定一個目標."
+#: khexeditui.rc:83
+#, no-c-format
+msgid "Searc&hbar"
+msgstr "搜尋列(&H)"
 
-#: exportdialog.cc:650
-msgid "Unable to create a new folder"
-msgstr "無法建立新目錄"
+#: khexeditui.rc:93 parts/kpart/khexedit2partui.rc:27
+#, no-c-format
+msgid "Main Toolbar"
+msgstr ""
 
-#: exportdialog.cc:661
-msgid "You have specified an existing file"
-msgstr "您指令了已經存在的檔案"
+#: khexeditui.rc:123
+#, fuzzy, no-c-format
+msgid "&Bookmarks"
+msgstr "書籤的文字"
 
-#: exportdialog.cc:669
-msgid "You do not have write permission to this folder."
-msgstr "您沒有這個資料夾的寫入權限."
+#: parts/kpart/khexedit2partui.rc:4
+#, fuzzy, no-c-format
+msgid "&Edit"
+msgstr "KHexEdit"
 
-#: exportdialog.cc:679
-msgid ""
-"You have specified an existing folder.\n"
-"If you continue, any existing file in the range \"%1\" to \"%2\" can be lost.\n"
-"Continue?"
+#: parts/kpart/khexedit2partui.rc:9
+#, no-c-format
+msgid "&View"
+msgstr ""
+
+#: parts/kpart/khexedit2partui.rc:20
+#, no-c-format
+msgid "&Settings"
 msgstr ""
-"您指定了已經存在的目錄。\n"
-"如果您繼續, 所有在下列範圍中的檔案\"%1\" 到 \"%2\"將會遺失.\n"
-"是否繼續?"
-- 
cgit v1.2.1