# translation of kdesktop.po to Hindi
# Copyright (C) 2004 Free Software Foundation, Inc.
# G Karunakar <karunakar@freedomink.org>, 2004.
# Ravishankar Shrivastava <raviratlami@yahoo.com>, 2004.
# Ravishankar Shrivastava <raviratlami@gmail.com>, 2004.
#
msgid ""
msgstr ""
"Project-Id-Version: kdesktop\n"
"POT-Creation-Date: 2014-09-29 12:05-0500\n"
"PO-Revision-Date: 2005-01-01 15:35+0530\n"
"Last-Translator: Ravishankar Shrivastava <raviratlami@gmail.com>\n"
"Language-Team: Hindi <indlinux-hindi@lists.sourceforge.net>\n"
"Language: hi\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"

#: lock/autologout.cc:42
msgid "Automatic Logout Notification"
msgstr ""

#: lock/autologout.cc:54
msgid "<nobr><qt><b>Automatic Log Out</b></qt><nobr>"
msgstr "<nobr><qt><b>स्वचालित लॉग आउट</b></qt><nobr>"

#: lock/autologout.cc:55
msgid ""
"<qt>To prevent being logged out, resume using this session by moving the mouse "
"or pressing a key.</qt>"
msgstr ""
"<qt>लॉगआउट से बचने के लिए माउस को खिसका कर या किसी कुंजी को दबाकर रीज्यूम "
"करें.</qt>"

#: lock/autologout.cc:97
#, fuzzy, c-format
msgid ""
"_n: <nobr><qt>You will be automatically logged out in 1 second</qt></nobr>\n"
"<nobr><qt>You will be automatically logged out in %n seconds</qt></nobr>"
msgstr "<nobr><qt>आप %n सेकण्ड में स्वचालित लाग आउट हो जाएंगे </qt></nobr>"

#: lock/lockdlg.cc:110 lock/sakdlg.cc:76
#, fuzzy
msgid "Desktop Session Locked"
msgstr "के-डेस्कटॉप लॉकर"

#: lock/lockdlg.cc:129 lock/lockdlg.cc:130
msgid "This computer is in use and has been locked."
msgstr ""

#: lock/lockdlg.cc:130
msgid "Only '%1' may unlock this session."
msgstr ""

#: lock/lockdlg.cc:134
msgid "<nobr><b>The session is locked</b><br>"
msgstr "<nobr><b>सत्र तालाबंद है</b><br>"

#: lock/lockdlg.cc:135
msgid "<nobr><b>The session was locked by %1</b><br>"
msgstr "<nobr><b>सत्र %1 के द्वारा तालाबंद है</b><br>"

#: lock/lockdlg.cc:140
#, c-format
msgid "This session has been locked since %1"
msgstr ""

#: lock/lockdlg.cc:151
msgid "Sw&itch User..."
msgstr "उपयोक्ता बदलें (&i)..."

#: lock/lockdlg.cc:152 lock/querydlg.cc:94
msgid "Unl&ock"
msgstr "ताला खोलें (&o)"

#: lock/lockdlg.cc:309
msgid "<b>Unlocking failed</b>"
msgstr "<b>ताला खोलना असफल</b>"

#: lock/lockdlg.cc:316
msgid "<b>Warning: Caps Lock on</b>"
msgstr "<b>चेतावनी: केप्स लॉक चालू है</b>"

#: lock/lockdlg.cc:561
msgid ""
"Cannot unlock the session because the authentication system failed to work;\n"
"you must kill kdesktop_lock (pid %1) manually."
msgstr ""
"सत्र का ताला नहीं खोल सकता, चूंकि प्रामाणीकरण तंत्र कार्य करने में असफल रहा.\n"
"आपको kdesktop_lock (pid %1) हस्तचालित बन्द करना होगा."

#: lock/lockdlg.cc:616 lock/lockprocess.cc:2395
msgid "Authentication Subsystem Notice"
msgstr ""

#: lock/lockdlg.cc:673
#, fuzzy
msgid "New Session"
msgstr "नया सत्र प्रारंभ करें"

#: lock/lockdlg.cc:687
msgid ""
"You have chosen to open another desktop session instead of resuming the current "
"one."
"<br>The current session will be hidden and a new login screen will be "
"displayed."
"<br>An F-key is assigned to each session; F%1 is usually assigned to the first "
"session, F%2 to the second session and so on. You can switch between sessions "
"by pressing Ctrl, Alt and the appropriate F-key at the same time. Additionally, "
"the TDE Panel and Desktop menus have actions for switching between sessions."
msgstr ""
"आपने मौज़ूदा डेस्कटॉप को फिर से  आरंभ करने के बजाए एक नया डेस्कटॉप प्रारंभ करना "
"चुना है."
"<br>मौज़ूदा सत्र छुप जाएगा तथा एक नया लॉगइन स्क्रीन दिखेगा."
"<br>एक फंक्शन कुंजी (F-key) प्रत्येक सत्र के लिए आबंटित है; F%1 सामान्यतः प्रथम "
"सत्र के लिए आबंटित होता है, F%2 द्वितीय सत्र के लिए तथा इसी प्रकार अन्य. आप इन "
"सत्रों के बीच स्विच हो सकते हैं इन कुंजियों - कंट्रोल, ऑल्ट तथा उपयुक्त F-कुंजी "
"को एक साथ दबाकर. इसके अतिरिक्त केडीई फलक तथा  डेस्कटॉप मेन्यू में सत्रों के बीच "
"अदला बदली के लिए क्रियाएँ हैं."

#: krootwm.cc:899 lock/lockdlg.cc:700
msgid "&Start New Session"
msgstr "नया सत्र प्रारंभ करें (&S)"

#: lock/lockdlg.cc:712
msgid "&Do not ask again"
msgstr "दोबारा मत पूछें (&D)"

#: kdesktopbindings.cpp:26 krootwm.cc:466 lock/lockdlg.cc:799
#: lock/securedlg.cc:116
msgid "Switch User"
msgstr "उपयोक्ता बदलें"

#: lock/lockdlg.cc:824
msgid "Session"
msgstr "सत्र"

#: lock/lockdlg.cc:825
msgid "Location"
msgstr "स्थान"

#: lock/lockdlg.cc:851
msgid ""
"_: session\n"
"&Activate"
msgstr "सक्रिय करें (&A) "

#: lock/lockdlg.cc:860
msgid "Start &New Session"
msgstr "नया सत्र प्रारंभ करें (&N)"

#: lock/lockprocess.cc:538 lock/lockprocess.cc:693
msgid "Securing desktop session"
msgstr ""

#: lock/lockprocess.cc:1435
msgid ""
"Will not lock the session, as unlocking would be impossible:\n"
msgstr ""
"सत्र को ताला नहीं लगा सकता, चूंकि स्क्रीन का ताला खोलना संभव नहीं है:\n"

#: lock/lockprocess.cc:1439
msgid "Cannot start <i>kcheckpass</i>."
msgstr "चालू नहीं कर सकता <i>के-चेकपास</i>."

#: lock/lockprocess.cc:1440
msgid "<i>kcheckpass</i> is unable to operate. Possibly it is not SetUID root."
msgstr ""
"<i>के-चेकपास</i> कार्य करने में अक्षम है. संभवतः यह SetUID रूट नहीं है."

#: lock/lockprocess.cc:1483
msgid "No appropriate greeter plugin configured."
msgstr "कोई उपयुक्त ग्रीटर प्लगइन कॉन्फ़िगर्ड नहीं है."

#: lock/main.cc:212
msgid "Force session locking"
msgstr "सत्र में ताला लगाना बाध्य करें"

#: lock/main.cc:213
msgid "Only start screensaver"
msgstr "सिर्फ स्क्रीन सेवर प्रारंभ करें"

#: lock/main.cc:214
msgid "Launch the secure dialog"
msgstr ""

#: lock/main.cc:215
msgid "Only use the blank screensaver"
msgstr "सिर्फ खाली(ब्लैंक) स्क्रीन सेवर इस्तेमाल करें"

#: lock/main.cc:216
msgid "TDE internal command for background process loading"
msgstr ""

#: lock/main.cc:234
msgid "KDesktop Locker"
msgstr "के-डेस्कटॉप लॉकर"

#: lock/main.cc:234
msgid "Session Locker for KDesktop"
msgstr "केडेस्कटॉप हेतु सत्र लॉकर"

#: lock/querydlg.cc:74
msgid "Information Needed"
msgstr ""

#: lock/sakdlg.cc:102
msgid "Press Ctrl+Alt+Del to begin."
msgstr ""

#: lock/sakdlg.cc:102
msgid "This process helps keep your password secure."
msgstr ""

#: lock/sakdlg.cc:102
msgid "It prevents unauthorized users from emulating the login screen."
msgstr ""

#: lock/securedlg.cc:76
#, fuzzy
msgid "Secure Desktop Area"
msgstr "डेस्कटॉप ताज़ा करें"

#: lock/securedlg.cc:95
msgid "'%1' is currently logged on"
msgstr ""

#: lock/securedlg.cc:98
msgid "You are currently logged on"
msgstr ""

#: kdesktopbindings.cpp:31 krootwm.cc:191 lock/securedlg.cc:104
msgid "Lock Session"
msgstr "सत्र पर ताला लगाएँ"

#: lock/securedlg.cc:107
#, fuzzy
msgid "Task Manager"
msgstr "कार्यमैनेजर दिखाएँ"

#: lock/securedlg.cc:110
msgid "Logoff Menu"
msgstr ""

#: desktop.cc:935
msgid "Set as Primary Background Color"
msgstr "प्राथमिक पृष्ठभूमि रंग की तरह इस्तेमाल करें"

#: desktop.cc:936
msgid "Set as Secondary Background Color"
msgstr "माध्यमिक पृष्ठभूमि रंग की तरह इस्तेमाल करें"

#: desktop.cc:953
msgid "&Save to Desktop..."
msgstr "डेस्कटॉप पर सहेजें... (&S)"

#: desktop.cc:955
msgid "Set as &Wallpaper"
msgstr "वालपेपर की तरह नियत करें (&W)"

#: desktop.cc:963
msgid "Enter a name for the image below:"
msgstr "नीचे दी गई छवि के लिए नाम भरें:"

#: desktop.cc:972
msgid "image.png"
msgstr "छवि.png"

#: desktop.cc:1035
msgid ""
"Could not log out properly.\n"
"The session manager cannot be contacted. You can try to force a shutdown by "
"pressing Ctrl+Alt+Backspace; note, however, that your current session will not "
"be saved with a forced shutdown."
msgstr ""
"ठीक ढंग से लॉगआउट नहीं हो सका.\n"
"सत्र प्रबंधक से संपर्क नहीं हो सका. आप कंट्रोल+ऑल्ट+बैकस्पेस  दबा कर कम्प्यूटर "
"बन्द करना बाध्य कर सकते हैं. टीप लें कि, हालाकि कम्पयूटर को बाध्य करके बन्द "
"करने से आपका मौज़ूदा सत्र सहेजा नहीं जा सकेगा."

#: init.cc:68
msgid ""
"%1 is a file, but TDE needs it to be a directory; move it to %2.orig and create "
"directory?"
msgstr ""
"%1 एक फ़ाइल है, परंतु केडीई को एक डिरेक्ट्री की आवश्यकता है; इसे %2.orig पर "
"खिसकाएँ तथा डिरेक्ट्री बनाएँ?"

#: init.cc:68
msgid "Move It"
msgstr ""

#: init.cc:68
msgid "Do Not Move"
msgstr ""

#: init.cc:82
msgid ""
"Could not create directory %1; check for permissions or reconfigure the desktop "
"to use another path."
msgstr ""
"डिरेक्ट्री %1 बना नहीं पाया; अनुमतियों के लिए देखें या अन्य पथ का इस्तेमाल करने "
"के लिए डेस्कटॉप को री-कॉन्फ़िगर करें."

#: kdiconview.cc:444
msgid "&Rename"
msgstr "नाम बदलें (&R)"

#: kdiconview.cc:445
msgid "&Properties"
msgstr ""

#: kdiconview.cc:446
msgid "&Move to Trash"
msgstr "रद्दी में डालें (&M)"

#: kdiconview.cc:808
msgid "You have chosen to remove a system icon"
msgstr ""

#: kdiconview.cc:808
msgid "You can restore this icon in the future through the"
msgstr ""

#: kdiconview.cc:808
msgid "tab in the"
msgstr ""

#: kdiconview.cc:808
msgid "Behavior"
msgstr ""

#: kdiconview.cc:808
msgid "pane of the Desktop Settings control module."
msgstr ""

#: krootwm.cc:134
msgid "Run Command..."
msgstr "कमांड चलाएँ..."

#: krootwm.cc:135
msgid "Open Terminal Here..."
msgstr ""

#: krootwm.cc:141
msgid "Configure Desktop..."
msgstr "डेस्कटॉप कॉन्फ़िगर करें..."

#: krootwm.cc:143 krootwm.cc:374
msgid "Disable Desktop Menu"
msgstr "डेस्कटॉप मेन्यू अक्षम करें"

#: krootwm.cc:147
msgid "Unclutter Windows"
msgstr "विंडोज़ व्यवस्थित करें"

#: krootwm.cc:149
msgid "Cascade Windows"
msgstr "विंडोज़ एक के बाद एक रखें"

#: krootwm.cc:155
msgid "By Name (Case Sensitive)"
msgstr "नाम से (केस सेंसिटिव)"

#: krootwm.cc:157
msgid "By Name (Case Insensitive)"
msgstr "नाम से (केस इनसेंसिटिव)"

#: krootwm.cc:159
msgid "By Size"
msgstr "आकार से "

#: krootwm.cc:161
msgid "By Type"
msgstr "क़िस्म से "

#: krootwm.cc:163
msgid "By Date"
msgstr "तारीख़ से"

#: krootwm.cc:166
msgid "Directories First"
msgstr "फ़ोल्डर पहले"

#: krootwm.cc:169
msgid "Line Up Horizontally"
msgstr "आड़ा जमाएँ"

#: krootwm.cc:172
msgid "Line Up Vertically"
msgstr "खड़ा जमाएँ"

#: krootwm.cc:175
msgid "Align to Grid"
msgstr "चौखाने में जमाएँ"

#. i18n: file kdesktop.kcfg line 185
#: krootwm.cc:179 rc.cpp:242
#, no-c-format
msgid "Lock in Place"
msgstr ""

#: krootwm.cc:185
msgid "Refresh Desktop"
msgstr "डेस्कटॉप ताज़ा करें"

#: krootwm.cc:196
msgid "Log Out \"%1\"..."
msgstr "लॉग-आउट \"%1\"..."

#: krootwm.cc:202
msgid "Start New Session"
msgstr "नया सत्र प्रारंभ करें"

#: krootwm.cc:206
msgid "Lock Current && Start New Session"
msgstr "मौजूदा सत्र तालाबंद करें तथा नया सत्र प्रारंभ करें"

#: krootwm.cc:352 krootwm.cc:434
msgid "Sort Icons"
msgstr "प्रतीक क्रमबद्ध करें"

#: krootwm.cc:354
msgid "Line Up Icons"
msgstr "प्रतीक जमाएँ"

#: krootwm.cc:381
msgid "Enable Desktop Menu"
msgstr "डेस्कटॉप मेन्यू सक्षम करें"

#: krootwm.cc:444
msgid "Icons"
msgstr "प्रतीक"

#: krootwm.cc:450 krootwm.cc:506
msgid "Windows"
msgstr "विंडोज़"

#: krootwm.cc:495
msgid "Sessions"
msgstr "सत्र"

#: krootwm.cc:499
msgid "New"
msgstr "नया"

#: kdesktopbindings.cpp:14 krootwm.cc:505
msgid "Desktop"
msgstr "डेस्कटॉप"

#: krootwm.cc:887
msgid ""
"<p>You have chosen to open another desktop session."
"<br>The current session will be hidden and a new login screen will be "
"displayed."
"<br>An F-key is assigned to each session; F%1 is usually assigned to the first "
"session, F%2 to the second session and so on. You can switch between sessions "
"by pressing Ctrl, Alt and the appropriate F-key at the same time. Additionally, "
"the TDE Panel and Desktop menus have actions for switching between sessions.</p>"
msgstr ""
"आपने मौज़ूदा डेस्कटॉप को फिर से  आरंभ करने के बजाए एक नया डेस्कटॉप प्रारंभ करना "
"चुना है."
"<br>मौज़ूदा सत्र छुप जाएगा तथा एक नया लॉगइन स्क्रीन दिखेगा."
"<br>एक फंक्शन कुंजी (F-key) प्रत्येक सत्र के लिए आबंटित है; F%1 सामान्यतः प्रथम "
"सत्र के लिए आबंटित होता है, F%2 द्वितीय सत्र के लिए तथा इसी प्रकार अन्य. आप इन "
"सत्रों के बीच स्विच हो सकते हैं इन कुंजियों - कंट्रोल, ऑल्ट तथा उपयुक्त F-कुंजी "
"को एक साथ दबाकर. इसके अतिरिक्त केडीई फलक तथा  डेस्कटॉप मेन्यू में सत्रों के बीच "
"अदला बदली के लिए क्रियाएँ हैं."

#: krootwm.cc:898
msgid "Warning - New Session"
msgstr "चेतावनी- नया सत्र"

#: main.cc:58
msgid "The TDE desktop"
msgstr "केडीई डेस्कटॉप"

#: main.cc:64
msgid "Use this if the desktop window appears as a real window"
msgstr "इसका इस्तेमाल करें यदि डेस्कटॉप विंडो वास्तविक विंडो जैसा दिखे"

#: main.cc:65
msgid "Obsolete"
msgstr ""

#: main.cc:66
msgid "Wait for kded to finish building database"
msgstr "केडीईडी को डाटाबेस बनाने देने तक इंतजार करें"

#: main.cc:68
msgid "Enable background transparency"
msgstr ""

#: main.cc:171
msgid "KDesktop"
msgstr "केडेस्कटॉप"

#: _translatorinfo.cpp:1
msgid ""
"_: NAME OF TRANSLATORS\n"
"Your names"
msgstr "रविशंकर श्रीवास्तव"

#: _translatorinfo.cpp:3
msgid ""
"_: EMAIL OF TRANSLATORS\n"
"Your emails"
msgstr "raviratlami@yahoo.com , http://www.geocities.com/raviratlami/"

#: kdesktopbindings.cpp:20 minicli.cpp:82
msgid "Run Command"
msgstr "कमांड चलाएँ..."

#: kdesktopbindings.cpp:24
msgid "Show Taskmanager"
msgstr "कार्यमैनेजर दिखाएँ"

#: kdesktopbindings.cpp:25
msgid "Show Window List"
msgstr "विंडो सूची दिखाएँ"

#: kdesktopbindings.cpp:32
#, fuzzy
msgid "Lock Session (Hotkey)"
msgstr "सत्र पर ताला लगाएँ"

#: kdesktopbindings.cpp:38
#, fuzzy
msgid "Start Screen Saver"
msgstr "सिर्फ स्क्रीन सेवर प्रारंभ करें"

#: kdesktopbindings.cpp:44
msgid "Log Out"
msgstr "लॉग आउट"

#: kdesktopbindings.cpp:45
msgid "Log Out Without Confirmation"
msgstr "पुष्टि किए बगैर लॉग आउट करें"

#: kdesktopbindings.cpp:46
msgid "Halt without Confirmation"
msgstr "पुष्टि किए बगैर हाल्ट करें"

#: kdesktopbindings.cpp:47
msgid "Reboot without Confirmation"
msgstr "पुष्टि किए बगैर रिबूट करें"

#: kxdglauncher.cpp:91
msgid "XDG variable name to open"
msgstr ""

#: kxdglauncher.cpp:92
msgid "Do not launch Konqueror; instead print path to directory if it exists)"
msgstr ""

#: kxdglauncher.cpp:98
msgid "TDE XDG File Browser Launcher and Prompter"
msgstr ""

#: kxdglauncher.cpp:98
msgid "Prompts if directory does not exist, otherwise launches"
msgstr ""

#: kxdglauncher.cpp:123
msgid ""
"Please confirm your Documents directory location"
"<br>Upon confimation a new directory will be created"
msgstr ""

#: kxdglauncher.cpp:124
msgid "Create Documents directory"
msgstr ""

#: kxdglauncher.cpp:167
msgid "Unable to create directory "
msgstr ""

#: kxdglauncher.cpp:167
msgid "Please check folder permissions and try again"
msgstr ""

#: kxdglauncher.cpp:167 kxdglauncher.cpp:172
msgid "Unable to create directory"
msgstr ""

#: kxdglauncher.cpp:172
msgid "Unable to create the directory "
msgstr ""

#: kxdglauncher.cpp:172
msgid "Directory path cannot be longer than 4096 characters"
msgstr ""

#: minicli.cpp:96 minicli.cpp:795
msgid "&Options >>"
msgstr "विकल्प >> (&O)"

#: minicli.cpp:99
msgid "&Run"
msgstr "चलाएँ (&R)"

#: minicli.cpp:452
msgid "<qt>The user <b>%1</b> does not exist on this system.</qt>"
msgstr "<qt>उपयोक्ता <b>%1</b> का अस्तित्व इस तंत्र पर नहीं है.</qt>"

#: minicli.cpp:462
msgid ""
"You do not exist.\n"
msgstr ""
"मौजूद नहीं है.\n"

#: minicli.cpp:487
msgid "Incorrect password; please try again."
msgstr "गलत पासवर्ड; कृपया पुनः कोशिश करें."

#: minicli.cpp:598
msgid ""
"<center><b>%1</b></center>\n"
"You do not have permission to execute this command."
msgstr ""
"<center><b>%1</b></center>\n"
"आपके पास इस कमांड को चलाने की अनुमति नहीं है."

#: minicli.cpp:626
msgid ""
"<center><b>%1</b></center>\n"
"Could not run the specified command."
msgstr ""
"<center><b>%1</b></center>\n"
"उल्लेखित कमांड नहीं चला सकता."

#: minicli.cpp:638
msgid ""
"<center><b>%1</b></center>\n"
"The specified command does not exist."
msgstr ""
"<center><b>%1</b></center>\n"
"उल्लेखित कमांड अस्तित्व में नहीं है."

#: minicli.cpp:783
msgid "&Options <<"
msgstr "विकल्प << (&O)"

#: minicli.cpp:1000
msgid ""
"Running a realtime application can be very dangerous. If the application "
"misbehaves, the system might hang unrecoverably.\n"
"Are you sure you want to continue?"
msgstr ""
"रीयल-टाइम अनुप्रयोग चलाना अत्यंत खतरनाक है. यदि अनुप्रयोग अनुचित बर्ताव करता "
"है, तंत्र हैंग होकर दुबारा संभलने लायक नहीं रहेगा.\n"
"क्या आप वाक़ई जारी रखना चाहते हैं?"

#: minicli.cpp:1003
msgid "Warning - Run Command"
msgstr "चेतावनी- कमांड चलाएँ"

#: minicli.cpp:1003
msgid "&Run Realtime"
msgstr "रीयलटाइम चलाएँ (&R)"

#. i18n: file minicli_ui.ui line 172
#: rc.cpp:3
#, no-c-format
msgid "Run with realtime &scheduling"
msgstr "रीयलटाइम शेड्यूलिंग सहित चलाएँ (&s)"

#. i18n: file minicli_ui.ui line 180
#: rc.cpp:6
#, no-c-format
msgid ""
"<qt>Select whether realtime scheduling should be enabled for the application. "
"The scheduler governs which process will run and which will have to wait. Two "
"schedulers are available:\n"
"<ul>\n"
"<li><em>Normal:</em> This is the standard, timesharing scheduler. It will "
"divide fairly the available processing time between all processes.</li>\n"
"<li><em>Realtime:</em>This scheduler will run your application uninterrupted "
"until it gives up the processor. This can be dangerous. An application that "
"does not give up the processor might hang the system. You need root's password "
"to use the scheduler.</li>\n"
"</ul>\n"
"</qt>"
msgstr ""

#. i18n: file minicli_ui.ui line 188
#: rc.cpp:14
#, no-c-format
msgid "Autocomplete shows available &applications"
msgstr ""

#. i18n: file minicli_ui.ui line 192
#: rc.cpp:17
#, no-c-format
msgid ""
"<qt>When enabled, the system shows available applications in the autocompletion "
"area.\n"
"\t\t\t\t\t\t</qt>"
msgstr ""

#. i18n: file minicli_ui.ui line 200
#: rc.cpp:21
#, no-c-format
msgid "Autocomplete uses &filesystem instead of history"
msgstr ""

#. i18n: file minicli_ui.ui line 204
#: rc.cpp:24
#, no-c-format
msgid ""
"<qt>This selects whether the filesystem or the past command history will be "
"used for autocompletion.\n"
"\t\t\t\t\t\t</qt>"
msgstr ""

#. i18n: file minicli_ui.ui line 212
#: rc.cpp:28
#, no-c-format
msgid "Autocomplete uses &both history and filesystem"
msgstr ""

#. i18n: file minicli_ui.ui line 216
#: rc.cpp:31
#, no-c-format
msgid ""
"<qt>This selects whether the filesystem and the past command history will be "
"used for autocompletion.\n"
"\t\t\t\t\t\t</qt>"
msgstr ""

#. i18n: file minicli_ui.ui line 235
#: rc.cpp:35
#, no-c-format
msgid "User&name:"
msgstr "उपयोक्ता नामः (&n)"

#. i18n: file minicli_ui.ui line 241
#: rc.cpp:38 rc.cpp:68
#, no-c-format
msgid "Enter the user you want to run the application as here."
msgstr ""
"इस अनुप्रयोग को जिस नाम से चलाना चाहते हैं, उस उपयोक्ता का नाम यहाँ भरें. "

#. i18n: file minicli_ui.ui line 260
#: rc.cpp:41 rc.cpp:47
#, no-c-format
msgid "Enter the password here for the user you specified above."
msgstr "आपने जिस उपयोक्ता को ऊपर उल्लेखित किया है, उसका पासवर्ड यहाँ भरें"

#. i18n: file minicli_ui.ui line 279
#: rc.cpp:44
#, no-c-format
msgid "Pass&word:"
msgstr "पासवर्डः (&w)"

#. i18n: file minicli_ui.ui line 293
#: rc.cpp:50
#, no-c-format
msgid "Run in &terminal window"
msgstr "टर्मिनल विंडो में चलाएँ (&t)"

#. i18n: file minicli_ui.ui line 296
#: rc.cpp:53
#, no-c-format
msgid ""
"Check this option if the application you want to run is a text mode "
"application. The application will then be run in a terminal emulator window."
msgstr ""
"इस विकल्प को चेक करें यदि आप जो अनुप्रयोग चलाना चाहते हैं वह पाठ मोड अनुप्रयोग "
"है. फिर अनुप्रयोग टर्मिनल एमुलेटर विंडो में चलेगा."

#. i18n: file minicli_ui.ui line 315
#: rc.cpp:56
#, no-c-format
msgid "&Priority:"
msgstr "प्राथमिकताः (&P)"

#. i18n: file minicli_ui.ui line 321
#: rc.cpp:59 rc.cpp:74 rc.cpp:80 rc.cpp:83
#, no-c-format
msgid ""
"The priority that the command will be run with can be set here. From left to "
"right, it goes from low to high. The center position is the default value. For "
"priorities higher than the default, you will need to provide the root password."
msgstr ""
"कमांड जिस प्राथमिकता से चलेगा वह यहाँ नियत किया जा सकता है. बाएँ से दायाँ, यह "
"कम से ज्यादा जाता है. मध्य स्थिति डिफ़ॉल्ट मान है. डिफ़ॉल्ट से ज्यादा "
"प्राथमिकता के लिए आपको रूट पासवर्ड की आवश्यकता होगी."

#. i18n: file minicli_ui.ui line 348
#: rc.cpp:62
#, no-c-format
msgid "Run with a &different priority"
msgstr "भिन्न प्राथमिकता से चलाएँ (&d)"

#. i18n: file minicli_ui.ui line 351
#: rc.cpp:65
#, no-c-format
msgid ""
"Check this option if you want to run the application with a different priority. "
"A higher priority tells the operating system to give more processing time to "
"your application."
msgstr ""
"इस विकल्प को चेक करें यदि आप अनुप्रयोग को भिन्न प्राथमिकता से चलाना चाहते हैं. "
"एक उच्च प्राथमिकता, ऑपरेटिंग सिस्टम को, आपके उस अनुप्रयोग को अधिक प्रोसेसिंग "
"समय देने के लिए बताता है."

#. i18n: file minicli_ui.ui line 392
#: rc.cpp:71
#, no-c-format
msgid "Low"
msgstr "निम्न"

#. i18n: file minicli_ui.ui line 406
#: rc.cpp:77
#, no-c-format
msgid "High"
msgstr "उच्च"

#. i18n: file minicli_ui.ui line 447
#: rc.cpp:86
#, no-c-format
msgid "Run as a different &user"
msgstr "भिन्न उपयोक्ता जैसे चलाएँ (&u)"

#. i18n: file minicli_ui.ui line 450
#: rc.cpp:89
#, no-c-format
msgid ""
"Check this option if you want to run the application with a different user id. "
"Every process has a user id associated with it. This id code determines file "
"access and other permissions. The password of the user is required to do this."
msgstr ""
"इस विकल्प को चेक करें यदि आप अनुप्रयोग को भिन्न उपयोक्ता पहचान सहित चलाना "
"चाहेंगे. प्रतयेक प्रोसेस के पास उपयोक्ता पहचान संबद्ध रहता है. यह कोड आईडी "
"फ़ाइल पहुँच तथा अन्य अनुमतियों को निर्धारित करता है. उपयोक्ता का पासवर्ड इस के "
"लिए आवश्यक होगा."

#. i18n: file minicli_ui.ui line 506
#: rc.cpp:92
#, no-c-format
msgid "Com&mand:"
msgstr "कमांडः (&m)"

#. i18n: file minicli_ui.ui line 512
#: rc.cpp:95 rc.cpp:98
#, fuzzy, no-c-format
msgid ""
"Enter the command you wish to execute or the address of the resource you want "
"to open. This can be a remote URL like \"www.trinitydesktop.org\" or a local "
"one like \"~/.tderc\"."
msgstr ""
"कमांड जो आप चलाना चाहते हैं वह या रिसोर्स का पता जो आप खोलना चाहते हैं, भरें. "
"यह एक रिमोट यूआरएल भी हो सकता है जैसे- \"www.kde.org\" एक स्थानीय भी जैसे- "
"\"~/.tderc\"."

#. i18n: file minicli_ui.ui line 569
#: rc.cpp:101
#, no-c-format
msgid ""
"Enter the name of the application you want to run or the URL you want to view"
msgstr ""
"अनुप्रयोग का नाम जिसे आप चलाना चाहते हैं, या यूआरएल जिसे आप देखना चाहते हैं, "
"यहाँ भरें. "

#. i18n: file kdesktop.kcfg line 11
#: rc.cpp:104
#, no-c-format
msgid "Common settings for all desktops"
msgstr ""

#. i18n: file kdesktop.kcfg line 12
#: rc.cpp:107
#, no-c-format
msgid ""
"If you want the same background settings to be applied to all desktops enable "
"this option."
msgstr ""

#. i18n: file kdesktop.kcfg line 16
#: rc.cpp:110
#, no-c-format
msgid "Common settings for all screens"
msgstr ""

#. i18n: file kdesktop.kcfg line 17
#: rc.cpp:113
#, no-c-format
msgid ""
"If you want the same background settings to be applied to all screens enable "
"this option."
msgstr ""

#. i18n: file kdesktop.kcfg line 21
#: rc.cpp:116
#, no-c-format
msgid "Draw backgrounds per screen"
msgstr ""

#. i18n: file kdesktop.kcfg line 22
#: rc.cpp:119
#, no-c-format
msgid ""
"If you want to draw to each screen separately in xinerama mode enable this "
"option."
msgstr ""

#. i18n: file kdesktop.kcfg line 26
#: rc.cpp:122
#, no-c-format
msgid "Limit background cache"
msgstr ""

#. i18n: file kdesktop.kcfg line 27
#: rc.cpp:125
#, no-c-format
msgid ""
"Enable this option if you want to limit the cache size for the background."
msgstr ""

#. i18n: file kdesktop.kcfg line 31
#: rc.cpp:128
#, no-c-format
msgid "Background cache size"
msgstr ""

#. i18n: file kdesktop.kcfg line 32
#: rc.cpp:131
#, no-c-format
msgid ""
"Here you can enter how much memory TDE should use for caching the "
"background(s). If you have different backgrounds for the different desktops "
"caching can make switching desktops smoother at the expense of higher memory "
"use."
msgstr ""

#. i18n: file kdesktop.kcfg line 36
#: rc.cpp:134
#, no-c-format
msgid "Background Opacity"
msgstr ""

#. i18n: file kdesktop.kcfg line 37
#: rc.cpp:137
#, no-c-format
msgid ""
"Here you can the opacity of the background (0-100). A composite manager can "
"then render something behind it."
msgstr ""

#. i18n: file kdesktop.kcfg line 43
#: rc.cpp:140
#, no-c-format
msgid "Show icons on desktop"
msgstr ""

#. i18n: file kdesktop.kcfg line 44
#: rc.cpp:143
#, no-c-format
msgid ""
"Uncheck this option if you do not want to have icons on the desktop. Without "
"icons the desktop will be somewhat faster but you will no longer be able to "
"drag files to the desktop."
msgstr ""

#. i18n: file kdesktop.kcfg line 48
#: rc.cpp:146
#, no-c-format
msgid "Allow programs in desktop window"
msgstr ""

#. i18n: file kdesktop.kcfg line 49
#: rc.cpp:149
#, no-c-format
msgid ""
"Check this option if you want to run X11 programs that draw into the desktop "
"such as xsnow, xpenguin or xmountain. If you have problems with applications "
"like netscape that check the root window for running instances, disable this "
"option."
msgstr ""

#. i18n: file kdesktop.kcfg line 60
#: rc.cpp:152
#, no-c-format
msgid "Automatically line up icons"
msgstr ""

#. i18n: file kdesktop.kcfg line 61
#: rc.cpp:155
#, no-c-format
msgid ""
"Check this option if you want to see your icons automatically aligned to the "
"grid when you move them."
msgstr ""

#. i18n: file kdesktop.kcfg line 65
#: rc.cpp:158 rc.cpp:236
#, fuzzy, no-c-format
msgid "Sort directories first"
msgstr "फ़ोल्डर पहले"

#. i18n: file kdesktop.kcfg line 76
#: rc.cpp:161
#, no-c-format
msgid "Mouse wheel over desktop background switches desktop"
msgstr ""

#. i18n: file kdesktop.kcfg line 77
#: rc.cpp:164
#, no-c-format
msgid ""
"You can switch between the virtual desktops by using the mouse wheel over the "
"desktop background."
msgstr ""

#. i18n: file kdesktop.kcfg line 88
#: rc.cpp:167
#, no-c-format
msgid "Terminal application"
msgstr ""

#. i18n: file kdesktop.kcfg line 89
#: rc.cpp:170
#, no-c-format
msgid "Defines which terminal application is used."
msgstr ""

#. i18n: file kdesktop.kcfg line 93
#: rc.cpp:173
#, no-c-format
msgid "Left Mouse Button Action"
msgstr ""

#. i18n: file kdesktop.kcfg line 94
#: rc.cpp:176
#, no-c-format
msgid ""
"You can choose what happens when you click the left button of your pointing "
"device on the desktop."
msgstr ""

#. i18n: file kdesktop.kcfg line 98
#: rc.cpp:179
#, no-c-format
msgid "Middle Mouse Button Action"
msgstr ""

#. i18n: file kdesktop.kcfg line 99
#: rc.cpp:182
#, no-c-format
msgid ""
"You can choose what happens when you click the middle button of your pointing "
"device on the desktop."
msgstr ""

#. i18n: file kdesktop.kcfg line 103
#: rc.cpp:185
#, no-c-format
msgid "Right Mouse Button Action"
msgstr ""

#. i18n: file kdesktop.kcfg line 104
#: rc.cpp:188
#, no-c-format
msgid ""
"You can choose what happens when you click the right button of your pointing "
"device on the desktop."
msgstr ""

#. i18n: file kdesktop.kcfg line 110
#: rc.cpp:191
#, no-c-format
msgid "KDE major version number"
msgstr ""

#. i18n: file kdesktop.kcfg line 115
#: rc.cpp:194
#, no-c-format
msgid "KDE minor version number"
msgstr ""

#. i18n: file kdesktop.kcfg line 120
#: rc.cpp:197
#, no-c-format
msgid "KDE release version number"
msgstr ""

#. i18n: file kdesktop.kcfg line 127
#: rc.cpp:200
#, no-c-format
msgid "Normal text color used for icon labels"
msgstr ""

#. i18n: file kdesktop.kcfg line 131
#: rc.cpp:203
#, no-c-format
msgid "Background color used for icon labels"
msgstr ""

#. i18n: file kdesktop.kcfg line 136
#: rc.cpp:206
#, no-c-format
msgid "Enable text shadow"
msgstr ""

#. i18n: file kdesktop.kcfg line 137
#: rc.cpp:209
#, no-c-format
msgid ""
"Check here to enable a shadow outline around the desktop font. This also "
"improves the readability of the desktop text against backgrounds of a similar "
"color."
msgstr ""

#. i18n: file kdesktop.kcfg line 150
#: rc.cpp:212
#, fuzzy, no-c-format
msgid "Show hidden files"
msgstr "विंडो सूची दिखाएँ"

#. i18n: file kdesktop.kcfg line 151
#: rc.cpp:215
#, no-c-format
msgid ""
"<p>If you check this option, any files in your desktop directory that begin "
"with a period (.) will be shown. Usually, such files contain configuration "
"information, and remain hidden from view.</p>\\n"
"<p>For example, files which are named \\\".directory\\\" are plain text files "
"which contain information for Konqueror, such as the icon to use in displaying "
"a directory, the order in which files should be sorted, etc. You should not "
"change or delete these files unless you know what you are doing.</p>"
msgstr ""

#. i18n: file kdesktop.kcfg line 155
#: rc.cpp:218
#, no-c-format
msgid "Align direction"
msgstr ""

#. i18n: file kdesktop.kcfg line 156
#: rc.cpp:221
#, no-c-format
msgid ""
"If this is enabled, icons are aligned vertically, otherwise horizontally."
msgstr ""

#. i18n: file kdesktop.kcfg line 160
#: rc.cpp:224
#, no-c-format
msgid "Show Icon Previews For"
msgstr ""

#. i18n: file kdesktop.kcfg line 161
#: rc.cpp:227
#, no-c-format
msgid "Select for which types of files you want to enable preview images."
msgstr ""

#. i18n: file kdesktop.kcfg line 175
#: rc.cpp:230
#, fuzzy, no-c-format
msgid "Sort criterion"
msgstr "प्रतीक क्रमबद्ध करें"

#. i18n: file kdesktop.kcfg line 176
#: rc.cpp:233
#, no-c-format
msgid ""
"Sets the sort criterion. Possible choices are NameCaseSensitive = 0, "
"NameCaseInsensitive = 1, Size = 2, Type = 3, Date = 4."
msgstr ""

#. i18n: file kdesktop.kcfg line 181
#: rc.cpp:239
#, no-c-format
msgid ""
"Enable this to place directories in front of the sorted list, otherwise they "
"are amongst the files."
msgstr ""

#. i18n: file kdesktop.kcfg line 186
#: rc.cpp:245
#, no-c-format
msgid "Check this option if you want to keep your icons from moving."
msgstr ""

#. i18n: file kdesktop.kcfg line 207
#: rc.cpp:248
#, no-c-format
msgid "Device Types to exclude"
msgstr ""

#. i18n: file kdesktop.kcfg line 208
#: rc.cpp:251
#, no-c-format
msgid "The device types which you do not want to see on the desktop."
msgstr ""

#. i18n: file kdesktop.kcfg line 221
#: rc.cpp:254
#, no-c-format
msgid "Current application's menu bar (Mac OS-style)"
msgstr ""

#. i18n: file kdesktop.kcfg line 222
#: rc.cpp:257
#, no-c-format
msgid ""
"If this option is selected, applications will not have their menu bar attached "
"to their own window anymore. Instead, there is one menu bar at the top of the "
"screen which shows the menus of the currently active application. You might "
"recognize this behavior from Mac OS."
msgstr ""

#. i18n: file kdesktop.kcfg line 228
#: rc.cpp:260
#, fuzzy, no-c-format
msgid "Desktop menu bar"
msgstr "के-डेस्कटॉप लॉकर"

#. i18n: file kdesktop.kcfg line 229
#: rc.cpp:263
#, no-c-format
msgid ""
"If this option is selected, there is one menu bar at the top of the screen "
"which shows the desktop menus."
msgstr ""

#. i18n: file kdesktop.kcfg line 235
#: rc.cpp:266
#, fuzzy, no-c-format
msgid "Enable screen saver"
msgstr "सिर्फ स्क्रीन सेवर प्रारंभ करें"

#. i18n: file kdesktop.kcfg line 236
#: rc.cpp:269
#, fuzzy, no-c-format
msgid "Enables the screen saver."
msgstr "सिर्फ खाली(ब्लैंक) स्क्रीन सेवर इस्तेमाल करें"

#. i18n: file kdesktop.kcfg line 240
#: rc.cpp:272
#, no-c-format
msgid "Screen saver timeout"
msgstr ""

#. i18n: file kdesktop.kcfg line 241
#: rc.cpp:275
#, no-c-format
msgid "Sets the seconds after which the screen saver is started."
msgstr ""

#. i18n: file kdesktop.kcfg line 245
#: rc.cpp:278
#, no-c-format
msgid "Suspend screen saver when DPMS kicks in"
msgstr ""

#. i18n: file kdesktop.kcfg line 248
#: rc.cpp:281
#, no-c-format
msgid ""
"Usually the screen saver is suspended when display power saving kicks in,\n"
"       as nothing can be seen on the screen anyway, obviously. However, some "
"screen savers\n"
"       actually perform useful computations, so it is not desirable to suspend "
"them."
msgstr ""

#. i18n: file kdesktop.kcfg line 303
#: rc.cpp:286
#, no-c-format
msgid ""
"When enabled this restores the old style unmanaged window behavior of desktop "
"locking."
msgstr ""

#. i18n: file kdesktop.kcfg line 308
#: rc.cpp:289
#, no-c-format
msgid ""
"When enabled the date and time when the desktop was locked is displayed as an "
"additional intrusion detection measure."
msgstr ""

#. i18n: file kdesktop.kcfg line 313
#: rc.cpp:292
#, no-c-format
msgid ""
"When disabled the screensaver starts immediately when locking the desktop."
msgstr ""

#. i18n: file kdesktop.kcfg line 318
#: rc.cpp:295
#, no-c-format
msgid ""
"When enabled all active windows are hidden from the screensaver, showing only "
"the desktop background as a result."
msgstr ""

#. i18n: file kdesktop.kcfg line 323
#: rc.cpp:298
#, no-c-format
msgid "Hide Cancel button from the \"Desktop Session Locked\" dialog."
msgstr ""

#. i18n: file kdesktop.kcfg line 328
#: rc.cpp:301
#, no-c-format
msgid ""
"When enabled, the Trinity Secure Attention Key (TSAK) system will be used to "
"secure the screen locker.  This requires system wide TSAK support to be enabled "
"prior to use."
msgstr ""

#~ msgid "Use this to disable the Autostart folder"
#~ msgstr "आटोस्टार्ट फ़ोल्डर को अक्षम करने के लिए इसका इस्तेमाल करें"

#~ msgid "Unused"
#~ msgstr "उपयोग में नहीं"

#~ msgid "Remote Login"
#~ msgstr "रिमोट लॉगइन"

#~ msgid ""
#~ "_: user: session type\n"
#~ "%1: %2"
#~ msgstr "%1: %2"

#~ msgid ""
#~ "_: display, virtual terminal\n"
#~ "%1, vt%2"
#~ msgstr "%1, vt%2"

#~ msgid ""
#~ "_: session (location)\n"
#~ "%1 (%2)"
#~ msgstr "%1 (%2)"