# Translation of tdeprint to Croatian # Copyright (C) Croatian team # Translators: Denis Lackovic ,Diana Ćorluka ,Hrvoje Spoljar ,Igor Jagec ,Ivan Knežević ,Ljubomir Božić ,Robert Pezer ,Vedran Rodic , msgid "" msgstr "" "Project-Id-Version: tdeprint 0\n" "POT-Creation-Date: 2019-07-21 20:16+0200\n" "PO-Revision-Date: 2007-01-23 02:10+0100\n" "Last-Translator: Renato Pavicic \n" "Language-Team: Croatian \n" "Language: hr\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=3; plural=n%10==1 && n%100!=11 ? 0 : n%10>=2 && n" "%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2;;\n" "X-Generator: TransDict server\n" "X-Poedit-Bookmarks: 70,-1,-1,-1,-1,-1,-1,-1,-1,-1\n" #: _translatorinfo:1 msgid "" "_: NAME OF TRANSLATORS\n" "Your names" msgstr "" #: _translatorinfo:2 msgid "" "_: EMAIL OF TRANSLATORS\n" "Your emails" msgstr "" #: cups/cupsaddsmb2.cpp:56 cups/cupsaddsmb2.cpp:364 msgid "&Export" msgstr "&Izvoz" #: cups/cupsaddsmb2.cpp:62 #, fuzzy msgid "Export Printer Driver to Windows Clients" msgstr "Izvoz upravljačkog programa pisača na Windows klijente" #: cups/cupsaddsmb2.cpp:73 msgid "&Username:" msgstr "&Korisničko ime:" #: cups/cupsaddsmb2.cpp:74 msgid "&Samba server:" msgstr "Samba poslužitelj" #: cups/cupsaddsmb2.cpp:75 management/kmwpassword.cpp:50 msgid "&Password:" msgstr "Š&ifra:" #: cups/cupsaddsmb2.cpp:80 msgid "" "

Samba server

Adobe Windows PostScript driver files plus the " "CUPS printer PPD will be exported to the [print$] special share of " "the Samba server (to change the source CUPS server, use the " "Configure Manager -> CUPS server first). The [print" "$] share must exist on the Samba side prior to clicking the Export button below." msgstr "" #: cups/cupsaddsmb2.cpp:89 msgid "" "

Samba username

User needs to have write access to the [print" "$] share on the Samba server. [print$] holds printer drivers " "prepared for download to Windows clients. This dialog does not work for " "Samba servers configured with security = share (but works fine with " "security = user)." msgstr "" #: cups/cupsaddsmb2.cpp:97 msgid "" "

Samba password

The Samba setting encrypt passwords = yes (default) requires prior use of smbpasswd -a [username] " "command, to create an encrypted Samba password and have Samba recognize it." msgstr "" #: cups/cupsaddsmb2.cpp:268 #, c-format msgid "Creating folder %1" msgstr "Stvaram direktorij %1" #: cups/cupsaddsmb2.cpp:276 #, c-format msgid "Uploading %1" msgstr "Učitavam %1" #: cups/cupsaddsmb2.cpp:284 #, c-format msgid "Installing driver for %1" msgstr "Postavljam upravljački program za %1" #: cups/cupsaddsmb2.cpp:292 #, c-format msgid "Installing printer %1" msgstr "Postavljam pisač %1" #: cups/cupsaddsmb2.cpp:334 msgid "Driver successfully exported." msgstr "Upravljački program uspješno izvezen." #: cups/cupsaddsmb2.cpp:344 msgid "" "Operation failed. Possible reasons are: permission denied or invalid Samba " "configuration (see cupsaddsmb manual page " "for detailed information, you need CUPS " "version 1.1.11 or higher). You may want to try again with another login/" "password." msgstr "" #: cups/cupsaddsmb2.cpp:353 msgid "Operation aborted (process killed)." msgstr "Postupak prekinut (proces ubijen)." #: cups/cupsaddsmb2.cpp:359 msgid "

Operation failed.

%1

" msgstr "

Postupak nije uspio!

%1

" #: cups/cupsaddsmb2.cpp:374 msgid "" "You are about to prepare the %1 driver to be shared out to Windows " "clients through Samba. This operation requires the Adobe PostScript Driver, a " "recent version of Samba 2.2.x and a running SMB service on the target " "server. Click Export to start the operation. Read the cupsaddsmb manual page in Konqueror or type man " "cupsaddsmb in a console window to learn more about this functionality." msgstr "" #: cups/cupsaddsmb2.cpp:394 msgid "" "Some driver files are missing. You can get them on Adobe web site. See cupsaddsmb manual page for more details (you need CUPS version 1.1.11 or higher)." msgstr "" #: cups/cupsaddsmb2.cpp:405 #, c-format msgid "Preparing to upload driver to host %1" msgstr "Priprema slanja upravljačkog programa na računalu %1" #: cups/cupsaddsmb2.cpp:410 management/networkscanner.cpp:149 msgid "&Abort" msgstr "&Prekini" #: cups/cupsaddsmb2.cpp:416 msgid "The driver for printer %1 could not be found." msgstr "Ne mogu naći upravljački program za pisač %1." #: cups/cupsaddsmb2.cpp:456 #, c-format msgid "Preparing to install driver on host %1" msgstr "Priprema instalacije upravljačkog programa na računalu %1" #: cups/ippreportdlg.cpp:34 msgid "IPP Report" msgstr "IPP izvješće" #: cups/ippreportdlg.cpp:34 cups/ippreportdlg.cpp:41 kprintdialog.cpp:307 msgid "&Print" msgstr "&Ispis" #: cups/ippreportdlg.cpp:93 msgid "Internal error: unable to generate HTML report." msgstr "Interna pogreška: Nije moguće generirati HTML izvještaj." #: cups/ipprequest.cpp:164 msgid "You don't have access to the requested resource." msgstr "Nemate pristup traženom resursu." #: cups/ipprequest.cpp:167 msgid "You are not authorized to access the requested resource." msgstr "Niste autorizirani da pristupite zatraženom resursu." #: cups/ipprequest.cpp:170 msgid "The requested operation cannot be completed." msgstr "Tražena operacija ne može biti završena." #: cups/ipprequest.cpp:173 msgid "The requested service is currently unavailable." msgstr "Traženi servis trenutno nije dostupan." #: cups/ipprequest.cpp:176 msgid "The target printer is not accepting print jobs." msgstr "Odredišni tiskač ne prihvaća poslove tiskanja." #: cups/ipprequest.cpp:313 msgid "" "Connection to CUPS server failed. Check that the CUPS server is correctly " "installed and running." msgstr "" "Spajanje na CUPS poslužitelja nije uspjelo. Provjerite je li CUPS " "poslužitelj ispravno instaliran i pokrenut." #: cups/ipprequest.cpp:316 msgid "The IPP request failed for an unknown reason." msgstr "IPP zahtjev nije uspio iz napoznatog razloga." #: cups/ipprequest.cpp:461 msgid "Attribute" msgstr "Atributi" #: cups/ipprequest.cpp:462 msgid "Values" msgstr "Vrijednosti" #: cups/ipprequest.cpp:500 cups/ipprequest.cpp:567 msgid "True" msgstr "Točno" #: cups/ipprequest.cpp:500 cups/ipprequest.cpp:567 msgid "False" msgstr "Netočno" #: cups/kmconfigcups.cpp:32 msgid "CUPS Server" msgstr "CUPS poslužitelj" #: cups/kmconfigcups.cpp:33 msgid "CUPS Server Settings" msgstr "Postavke CUPS poslužitelja" #: cups/kmconfigcupsdir.cpp:34 msgid "Folder" msgstr "Mapa" #: cups/kmconfigcupsdir.cpp:35 msgid "CUPS Folder Settings" msgstr "CUPS postavke poslužitelja" #: cups/kmconfigcupsdir.cpp:38 msgid "Installation Folder" msgstr "Instalacijski direktorij" #: cups/kmconfigcupsdir.cpp:41 msgid "Standard installation (/)" msgstr "Standardna instalacija (/)" #: cups/kmcupsconfigwidget.cpp:65 msgid "Server Information" msgstr "Informacije o poslužitelju" #: cups/kmcupsconfigwidget.cpp:66 msgid "Account Information" msgstr "Informacije o računu" #: cups/kmcupsconfigwidget.cpp:67 rlpr/kmproxywidget.cpp:34 msgid "&Host:" msgstr "&Računalo:" #: cups/kmcupsconfigwidget.cpp:68 management/kmwsocketutil.cpp:53 #: management/networkscanner.cpp:339 rlpr/kmproxywidget.cpp:35 msgid "&Port:" msgstr "&Port:" #: cups/kmcupsconfigwidget.cpp:75 msgid "&User:" msgstr "&Korisnik:" #: cups/kmcupsconfigwidget.cpp:76 msgid "Pass&word:" msgstr "&Šifra:" #: cups/kmcupsconfigwidget.cpp:79 msgid "&Store password in configuration file" msgstr "Spremi lozinku u datoteku postavki." #: cups/kmcupsconfigwidget.cpp:81 msgid "Use &anonymous access" msgstr "Koristi &anonimni pristup" #: cups/kmcupsjobmanager.cpp:349 msgid "Job Report" msgstr "Izvješće posla" #: cups/kmcupsjobmanager.cpp:351 cups/kmcupsjobmanager.cpp:456 msgid "Unable to retrieve job information: " msgstr "Nije moguće dohvatiti podatke o zadatku:" #: cups/kmcupsjobmanager.cpp:360 #, fuzzy msgid "&Job IPP Report" msgstr "IPP izv&ješće posla..." #: cups/kmcupsjobmanager.cpp:362 msgid "&Increase Priority" msgstr "&Povećaj važnost" #: cups/kmcupsjobmanager.cpp:364 msgid "&Decrease Priority" msgstr "&Smanji važnost" #: cups/kmcupsjobmanager.cpp:366 msgid "&Edit Attributes..." msgstr "&Uređivanje atributa..." #: cups/kmcupsjobmanager.cpp:419 msgid "Unable to change job priority: " msgstr "Nije moguće promijeniti prioritet zadatka:" #: cups/kmcupsjobmanager.cpp:477 #, c-format msgid "Unable to find printer %1." msgstr "Nije moguće pronaći pisač %1." #: cups/kmcupsjobmanager.cpp:494 msgid "Attributes of Job %1@%2 (%3)" msgstr "Atributi posla %1@%2 (%3)" #: cups/kmcupsjobmanager.cpp:516 msgid "Unable to set job attributes: " msgstr "Nije moguće podesiti atribute zadatka:" #: cups/kmcupsmanager.cpp:651 lpr/matichandler.cpp:254 lpr/matichandler.cpp:358 msgid "" "Unable to find the executable foomatic-datafile in your PATH. Check that " "Foomatic is correctly installed." msgstr "" "Nije moguće pronaći izvršnu Foomatic datoteku u vašoj putanji. Provjerite je " "li Foomatic ispravno instaliran." #: cups/kmcupsmanager.cpp:683 lpr/matichandler.cpp:286 lpr/matichandler.cpp:405 msgid "" "Unable to create the Foomatic driver [%1,%2]. Either that driver does not " "exist, or you don't have the required permissions to perform that operation." msgstr "" "Nije moguće izraditi Foomatic upravljački program [%1,%2]. Upravljački " "program ne postoji ili nemate dopuštenja za izvođenje tog postupka." #: cups/kmcupsmanager.cpp:840 msgid "Library cupsdconf not found. Check your installation." msgstr "Biblioteka cupsdconf nije pronađena. Provjerite vašu instalaciju." #: cups/kmcupsmanager.cpp:846 msgid "Symbol %1 not found in cupsdconf library." msgstr "Simbol %1 nije pronađen u cupsdconf biblioteci." #: cups/kmcupsmanager.cpp:941 msgid "&Export Driver..." msgstr "&Izvoz upravljačkog programa..." #: cups/kmcupsmanager.cpp:943 #, fuzzy msgid "&Printer IPP Report" msgstr "&IPP izvješće pisača..." #: cups/kmcupsmanager.cpp:994 cups/kmwippprinter.cpp:218 #, c-format msgid "IPP Report for %1" msgstr "IPP izvještaj za %1" #: cups/kmcupsmanager.cpp:998 msgid "Unable to retrieve printer information. Error received:" msgstr "Nije moguće dohvatiti podatke o pisaču. Primljena pogreška:" #: cups/kmcupsmanager.cpp:1011 #, fuzzy msgid "Server" msgstr "Poslužitelj:" #: cups/kmcupsmanager.cpp:1051 #, c-format msgid "" "Connection to CUPS server failed. Check that the CUPS server is correctly " "installed and running. Error: %1." msgstr "" "Povezivanje s CUPS poslužiteljem nije uspjelo. Provjerite da li je CUPS " "poslužitelj ispravno postavljen i pokrenut. Error: %1." #: cups/kmcupsmanager.cpp:1052 msgid "the IPP request failed for an unknown reason" msgstr "IPP zahtjev nije uspio iz nepoznatog razloga." #: cups/kmcupsmanager.cpp:1086 msgid "connection refused" msgstr "Odbijeno spajanje na poslužitelj." #: cups/kmcupsmanager.cpp:1089 msgid "host not found" msgstr "Pisač nije nađen." #: cups/kmcupsmanager.cpp:1093 msgid "read failed (%1)" msgstr "" #: cups/kmcupsmanager.cpp:1097 #, fuzzy msgid "" "Connection to CUPS server failed. Check that the CUPS server is correctly " "installed and running. Error: %2: %1." msgstr "" "Povezivanje s CUPS poslužiteljem nije uspjelo. Provjerite da li je CUPS " "poslužitelj ispravno postavljen i pokrenut. Error: %1." #: cups/kmcupsuimanager.cpp:87 msgid "" "

Print queue on remote CUPS server

Use this for a print queue " "installed on a remote machine running a CUPS server. This allows to use " "remote printers when CUPS browsing is turned off.

" msgstr "" #: cups/kmcupsuimanager.cpp:94 msgid "" "

Network IPP printer

Use this for a network-enabled printer " "using the IPP protocol. Modern high-end printers can use this mode. Use this " "mode instead of TCP if your printer can do both.

" msgstr "" #: cups/kmcupsuimanager.cpp:101 msgid "" "

Fax/Modem printer

Use this for a fax/modem printer. This " "requires the installation of the fax4CUPS backend. Documents sent on this printer will be " "faxed to the given target fax number.

" msgstr "" #: cups/kmcupsuimanager.cpp:108 msgid "" "

Other printer

Use this for any printer type. To use this " "option, you must know the URI of the printer you want to install. Refer to " "the CUPS documentation for more information about the printer URI. This " "option is mainly useful for printer types using 3rd party backends not " "covered by the other possibilities.

" msgstr "" #: cups/kmcupsuimanager.cpp:116 msgid "" "

Class of printers

Use this to create a class of printers. When " "sending a document to a class, the document is actually sent to the first " "available (idle) printer in the class. Refer to the CUPS documentation for " "more information about class of printers.

" msgstr "" #: cups/kmcupsuimanager.cpp:129 msgid "Re&mote CUPS server (IPP/HTTP)" msgstr "Udaljeni CUPS poslužitelj (IPP/HTTP)" #: cups/kmcupsuimanager.cpp:130 msgid "Network printer w/&IPP (IPP/HTTP)" msgstr "Mrežni pisač w/&IPP (IPP/HTTP)" #: cups/kmcupsuimanager.cpp:131 msgid "S&erial Fax/Modem printer" msgstr "S&erijski Fax/Modem pisač" #: cups/kmcupsuimanager.cpp:132 msgid "Other &printer type" msgstr "Druga vrsta pisača" #: cups/kmcupsuimanager.cpp:134 msgid "Cl&ass of printers" msgstr "K&lasa pisača" #: cups/kmcupsuimanager.cpp:190 #, fuzzy msgid "An error occurred while retrieving the list of available backends:" msgstr "Došlo je do greške kod čitanja popisa pisača:" #: cups/kmcupsuimanager.cpp:236 msgid "Priority" msgstr "Prioritet" #: cups/kmcupsuimanager.cpp:238 msgid "Billing Information" msgstr "Podaci o trošku" #: cups/kmpropbanners.cpp:35 cups/kmwbanners.cpp:92 msgid "&Starting banner:" msgstr "Početna na&slovnica:" #: cups/kmpropbanners.cpp:36 cups/kmwbanners.cpp:93 msgid "&Ending banner:" msgstr "Završna n&aslovnica:" #: cups/kmpropbanners.cpp:49 kpgeneralpage.cpp:298 msgid "Banners" msgstr "Transparenti" #: cups/kmpropbanners.cpp:50 msgid "Banner Settings" msgstr "Postavke naslova" #: cups/kmpropquota.cpp:39 cups/kmwquota.cpp:96 msgid "&Period:" msgstr "&Period:" #: cups/kmpropquota.cpp:40 cups/kmwquota.cpp:97 msgid "&Size limit (KB):" msgstr "&Granica veličine (KB):" #: cups/kmpropquota.cpp:41 cups/kmwquota.cpp:98 msgid "&Page limit:" msgstr "G&ranica stranica:" #: cups/kmpropquota.cpp:57 msgid "Quotas" msgstr "Ograničenje količine" #: cups/kmpropquota.cpp:58 msgid "Quota Settings" msgstr "Postavke ograničenja" #: cups/kmpropquota.cpp:78 cups/kmwquota.cpp:84 msgid "No quota" msgstr "Bez ograničenja" #: cups/kmpropquota.cpp:79 cups/kmpropquota.cpp:80 cups/kmwquota.cpp:87 #: cups/kmwquota.cpp:90 msgid "None" msgstr "Nijedna" #: cups/kmpropusers.cpp:38 cups/kmwusers.cpp:39 msgid "Users" msgstr "Korisnici" #: cups/kmpropusers.cpp:39 cups/kmwusers.cpp:36 msgid "Users Access Settings" msgstr "Postavke pristupa korisnika" #: cups/kmpropusers.cpp:55 msgid "Denied users" msgstr "Zabranjeni korisnici" #: cups/kmpropusers.cpp:62 msgid "Allowed users" msgstr "Dozvoljeni korisnici" #: cups/kmpropusers.cpp:76 msgid "All users allowed" msgstr "Dozvoljeno svim korisnicima" #: cups/kmwbanners.cpp:57 msgid "No Banner" msgstr "Bez naslova" #: cups/kmwbanners.cpp:58 msgid "Classified" msgstr "Klasificirano" #: cups/kmwbanners.cpp:59 msgid "Confidential" msgstr "Povjerljivo" #: cups/kmwbanners.cpp:60 msgid "Secret" msgstr "Tajno" #: cups/kmwbanners.cpp:61 msgid "Standard" msgstr "Standardno" #: cups/kmwbanners.cpp:62 msgid "Top Secret" msgstr "Stroga tajna" #: cups/kmwbanners.cpp:63 msgid "Unclassified" msgstr "Neklasificirano" #: cups/kmwbanners.cpp:86 msgid "Banner Selection" msgstr "Izbor naslova" #: cups/kmwbanners.cpp:99 msgid "" "

Select the default banners associated with this printer. These banners " "will be inserted before and/or after each print job sent to the printer. If " "you don't want to use banners, select No Banner.

" msgstr "" "

Odaberite uobičajene naslove vezane uz ovaj pisač. Ti naslovi bit će " "umetnuti prije i/ili nakon svakog ispisa poslanog na pisač. Ako ne želite " "koristiti naslove, odaberite nijedan.

" #: cups/kmwfax.cpp:39 msgid "Fax Serial Device" msgstr "Fax serijski uređaj" #: cups/kmwfax.cpp:43 msgid "

Select the device which your serial Fax/Modem is connected to.

" msgstr "

Odaberite gdje je spojen vaš serijski Fax/Modem.

" #: cups/kmwfax.cpp:81 msgid "You must select a device." msgstr "Morate navesti uređaj." #: cups/kmwipp.cpp:35 msgid "Remote IPP server" msgstr "Udaljeni IPP poslužitelj" #: cups/kmwipp.cpp:39 msgid "" "

Enter the information concerning the remote IPP server owning the " "targeted printer. This wizard will poll the server before continuing.

" msgstr "" "

Unesite podatke o udaljenom IPP poslužitelju koji posjeduje ciljni pisač. " "Ovaj čarobnjak će sakupiti poslužitelj prije nastavka.

" #: cups/kmwipp.cpp:42 management/kmwlpd.cpp:46 rlpr/kmproprlpr.cpp:34 #: rlpr/kmwrlpr.cpp:62 msgid "Host:" msgstr "Računalo:" #: cups/kmwipp.cpp:43 msgid "Port:" msgstr "Port:" #: cups/kmwipp.cpp:52 management/kmwsmb.cpp:79 msgid "Empty server name." msgstr "Prazno ime poslužitelja." #: cups/kmwipp.cpp:59 msgid "Incorrect port number." msgstr "Neispravni broj porta." #: cups/kmwipp.cpp:72 msgid "Unable to connect to %1 on port %2 ." msgstr "" "Povezivanje s pisačem %1 na portu %2 nije moguće!" #: cups/kmwippprinter.cpp:45 msgid "IPP Printer Information" msgstr "IPP informacije o pisaču" #: cups/kmwippprinter.cpp:55 msgid "&Printer URI:" msgstr "URI &pisača:" #: cups/kmwippprinter.cpp:64 msgid "" "

Either enter the printer URI directly, or use the network scanning " "facility.

" msgstr "

Unesite URL pisača ili koristite uslugu pregledavanja mreže.

" #: cups/kmwippprinter.cpp:65 #, fuzzy msgid "&IPP Report" msgstr "IPP izvješće" #: cups/kmwippprinter.cpp:112 msgid "You must enter a printer URI." msgstr "Morate upisati uri pisača!" #: cups/kmwippprinter.cpp:119 management/kmwsocket.cpp:117 msgid "No printer found at this address/port." msgstr "Nije pronađen pisač na toj adresi/portu" #: cups/kmwippprinter.cpp:139 management/kmwsocket.cpp:136 msgid "" "_: Unknown host - 1 is the IP\n" " (%1)" msgstr " (%1)" #: cups/kmwippprinter.cpp:173 msgid "Name: %1
" msgstr "Ime: %1
" #: cups/kmwippprinter.cpp:174 msgid "Location: %1
" msgstr "Lokacija: %1
" #: cups/kmwippprinter.cpp:175 msgid "Description: %1
" msgstr "Opis: %1
" #: cups/kmwippprinter.cpp:182 msgid "Model: %1
" msgstr "Model: %1
" #: cups/kmwippprinter.cpp:187 kmprinter.cpp:139 msgid "Idle" msgstr "Čeka" #: cups/kmwippprinter.cpp:188 kmprinter.cpp:141 msgid "Stopped" msgstr "Zaustavljeno" #: cups/kmwippprinter.cpp:189 kmjob.cpp:111 kmprinter.cpp:140 msgid "Processing..." msgstr "Obrađujem..." #: cups/kmwippprinter.cpp:190 kmjob.cpp:132 kmprinter.cpp:142 msgid "" "_: Unknown State\n" "Unknown" msgstr "Nepoznato" #: cups/kmwippprinter.cpp:192 msgid "State: %1
" msgstr "Stanje: %1
" #: cups/kmwippprinter.cpp:199 #, c-format msgid "Unable to retrieve printer info. Printer answered:

%1" msgstr "Nije moguće dohvatiti podatke o pisaču. Odgovor pisača:

%1" #: cups/kmwippprinter.cpp:222 msgid "Unable to generate report. IPP request failed with message: %1 (0x%2)." msgstr "" "Nije moguće generirati izvještaj. IPP zahtjev odbijen uz poruku: %1 (0x%2)." #: cups/kmwippselect.cpp:38 msgid "Remote IPP Printer Selection" msgstr "Izbor udaljenog IPP pisača" #: cups/kmwippselect.cpp:51 msgid "You must select a printer." msgstr "Morate izabrati pisač!" #: cups/kmwother.cpp:41 msgid "URI Selection" msgstr "Izbor adrese" #: cups/kmwother.cpp:46 msgid "" "

Enter the URI corresponding to the printer to be installed. Examples:

  • smb://[login[:passwd]@]server/printer
  • lpd://server/queue
  • parallel:/dev/lp0
" msgstr "" #: cups/kmwother.cpp:51 management/kminfopage.cpp:52 #: management/kmpropbackend.cpp:35 management/kmwlocal.cpp:54 msgid "URI:" msgstr "URL:" #: cups/kmwother.cpp:78 msgid "CUPS Server %1:%2" msgstr "CUPS poslužitelj %1:%2" #: cups/kmwquota.cpp:46 msgid "second(s)" msgstr "sekunda(i)" #: cups/kmwquota.cpp:47 msgid "minute(s)" msgstr "minuta(i)" #: cups/kmwquota.cpp:48 msgid "hour(s)" msgstr "sat(i)" #: cups/kmwquota.cpp:49 msgid "day(s)" msgstr "dan(a)" #: cups/kmwquota.cpp:50 msgid "week(s)" msgstr "tjedan(a)" #: cups/kmwquota.cpp:51 msgid "month(s)" msgstr "mjesec(i)" #: cups/kmwquota.cpp:79 msgid "Printer Quota Settings" msgstr "Postavke organičenja pisača" #: cups/kmwquota.cpp:104 msgid "" "

Set here the quota for this printer. Using limits of 0 means that " "no quota will be used. This is equivalent to set quota period to No " "quota (-1). Quota limits are defined on a per-user base and " "applied to all users.

" msgstr "" #: cups/kmwquota.cpp:130 msgid "You must specify at least one quota limit." msgstr "Morate navesti barem jedno ograničenje!" #: cups/kmwusers.cpp:41 msgid "Allowed Users" msgstr "Dozvoljeni korisnici" #: cups/kmwusers.cpp:42 msgid "Denied Users" msgstr "Zabranjeni korisnici" #: cups/kmwusers.cpp:44 msgid "Define here a group of allowed/denied users for this printer." msgstr "Ovdje podešavate grupe korisnika koje imaju/nemaju pristup pisaču." #: cups/kmwusers.cpp:45 management/kxmlcommanddlg.cpp:117 msgid "&Type:" msgstr "Vrs&ta:" #: cups/kphpgl2page.cpp:33 msgid "" " Print in Black Only (Blackplot)

The 'blackplot' option " "specifies that all pens should plot in black-only: The default is to use the " "colors defined in the plot file, or the standard pen colors defined in the " "HP-GL/2 reference manual from Hewlett Packard.


" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: 

    -o "
"blackplot=true

" msgstr "" #: cups/kphpgl2page.cpp:48 msgid "" " Scale Print Image to Page Size

The 'fitplot' option " "specifies that the HP-GL image should be scaled to fill exactly the page " "with the (elsewhere selected) media size.

The default is 'fitplot " "is disabled'. The default will therefore use the absolute distances " "specified in the plot file. (You should be aware that HP-GL files are very " "often CAD drawings intended for large format plotters. On standard office " "printers they will therefore lead to the drawing printout being spread " "across multiple pages.)

Note:This feature depends upon an " "accurate plot size (PS) command in the HP-GL/2 file. If no plot size is " "given in the file the filter converting the HP-GL to PostScript assumes the " "plot is ANSI E size.


Additional hint for power " "users: This TDEPrint GUI element matches with the CUPS commandline job " "option parameter: 

     -o fitplot=true

" msgstr "" #: cups/kphpgl2page.cpp:68 msgid "" " Set Pen Width for HP-GL (if not defined in file).

The pen " "width value can be set here in case the original HP-GL file does not have " "it set. The pen width specifies the value in micrometers. The default value " "of 1000 produces lines that are 1000 micrometers == 1 millimeter in width. " "Specifying a pen width of 0 produces lines that are exactly 1 pixel wide.

Note: The penwidth option set here is ignored if the pen " "widths are set inside the plot file itself..


" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: 

    -o "
"penwidth=...   # example: \"2000\" or \"500\"

" msgstr "" #: cups/kphpgl2page.cpp:85 msgid "" " HP-GL Print Options

All options on this page are only " "applicable if you use TDEPrint to send HP-GL and HP-GL/2 files to one of " "your printers.

HP-GL and HP-GL/2 are page description languages " "developed by Hewlett-Packard to drive Pen Plotting devices.

" "

TDEPrint can (with the help of CUPS) convert the HP-GL file format and " "print it on any installed printer.

Note 1: To print HP-GL " "files, start 'kprinter' and simply load the file into the running kprinter." "

Note 2: The 'fitplot' parameter provided on this dialog does " "also work for printing PDF files (if your CUPS version is more recent than " "1.1.22).


Additional hint for power users: " "These TDEPrint GUI elements match with CUPS commandline job option " "parameters: 

     -o blackplot=...  # examples: \"true\" or \"false"
"\"  
     -o fitplot=...    # examples: \"true\" or \"false\"  
     -"
"o penwidth=...   # examples: \"true\" or \"false\"

" msgstr "" #: cups/kphpgl2page.cpp:113 msgid "HP-GL/2 Options" msgstr "HP-GL/2 odrednice" #: cups/kphpgl2page.cpp:115 msgid "&Use only black pen" msgstr "&Koristi samo crnu boju" #: cups/kphpgl2page.cpp:118 msgid "&Fit plot to page" msgstr "Podesi prema &veličini stranice" #: cups/kphpgl2page.cpp:122 msgid "&Pen width:" msgstr "&Debljina pisala:" #: cups/kpimagepage.cpp:44 msgid "" "

Brightness: Slider to control the brightness value of all " "colors used.

The brightness value can range from 0 to 200. Values " "greater than 100 will lighten the print. Values less than 100 will darken " "the print.


Additional hint for power users: " "This TDEPrint GUI element matches with the CUPS commandline job option " "parameter: 

    -o brightness=...      # use range from \"0\" to "
"\"200\"

" msgstr "" #: cups/kpimagepage.cpp:58 msgid "" "

Hue (Tint): Slider to control the hue value for color " "rotation.

The hue value is a number from -360 to 360 and represents " "the color hue rotation. The following table summarizes the change you will " "see for the base colors:

" " " " " " " "
Original hue=-45 hue=45
Red Purple Yellow-" "orange
Green Yellow-greenBlue-green
Yellow Orange Green-yellow
BlueSky-blue Purple
Magenta Indigo Crimson
Cyan Blue-green Light-navy-blue

Additional hint for " "power users: This TDEPrint GUI element matches with the CUPS " "commandline job option parameter: 

    -o hue=...     # use range "
"from \"-360\" to \"360\"

" msgstr "" #: cups/kpimagepage.cpp:83 msgid "" "

Saturation: Slider to control the saturation value for all " "colors used.

The saturation value adjusts the saturation of the " "colors in an image, similar to the color knob on your television. The color " "saturation value.can range from 0 to 200. On inkjet printers, a higher " "saturation value uses more ink. On laserjet printers, a higher saturation " "uses more toner. A color saturation of 0 produces a black-and-white print, " "while a value of 200 will make the colors extremely intense.


" "

Additional hint for power users: This TDEPrint GUI " "element matches with the CUPS commandline job option parameter: " "

    -o saturation=...      # use range from \"0\" to \"200\"
" msgstr "" #: cups/kpimagepage.cpp:101 msgid "" "

Gamma: Slider to control the gamma value for color " "correction.

The gamma value can range from 1 to 3000. A gamma " "values greater than 1000 lightens the print. A gamma value less than 1000 " "darken the print. The default gamma is 1000.

Note:

the " "gamma value adjustment is not visible in the thumbnail preview.


" "

Additional hint for power users: This TDEPrint GUI " "element matches with the CUPS commandline job option parameter: " "

    -o gamma=...      # use range from \"1\" to \"3000\"

" "" msgstr "" #: cups/kpimagepage.cpp:118 msgid "" "

Image Printing Options

All options controlled on " "this page only apply to printing images. Most image file formats are " "supported. To name a few: JPEG, TIFF, PNG, GIF, PNM (PBM/PGM/PNM/PPM), Sun " "Raster, SGI RGB, Windows BMP. Options to influence color output of image " "printouts are:

  • Brightness
  • Hue
  • " "Saturation
  • Gamma

For a more detailed " "explanation about Brightness, Hue, Saturation and Gamma settings, please " "look at the 'WhatsThis' items provided for these controls.

" msgstr "" #: cups/kpimagepage.cpp:136 msgid "" "

Coloration Preview Thumbnail

The coloration preview " "thumbnail indicates change of image coloration by different settings. " "Options to influence output are:

  • Brightness
  • Hue " "(Tint)
  • Saturation
  • Gamma

" "

For a more detailed explanation about Brightness, Hue, Saturation and " "Gamma settings, please look at the 'WhatsThis' items provided for these " "controls.

" msgstr "" #: cups/kpimagepage.cpp:152 msgid "" "

Image Size: Dropdown menu to control the image size on the " "printed paper. Dropdown works in conjunction with slider below. Dropdown " "options are:.

  • Natural Image Size: Image prints in its " "natural image size. If it does not fit onto one sheet, the printout will be " "spread across multiple sheets. Note, that the slider is disabled when " "selecting 'natural image size' in the dropdown menu.
  • " "Resolution (ppi): The resolution value slider covers a number range " "from 1 to 1200. It specifies the resolution of the image in Pixels Per Inch " "(PPI). An image that is 3000x2400 pixels will print 10x8 inches at 300 " "pixels per inch, for example, but 5x4 inches at 600 pixels per inch. If the " "specified resolution makes the image larger than the page, multiple pages " "will be printed. Resolution defaults to 72 ppi.
  • % of Page " "Size: The percent value slider covers numbers from 1 to 800. It " "specifies the size in relation to the page (not the image). A scaling of " "100 percent will fill the page as completely as the image aspect ratio " "allows (doing auto-rotation of the image as needed). A scaling of more than " "100 will print the image across multiple sheets. A scaling of 200 percent " "will print on up to 4 pages.
    • Scaling in % of page size defaults to 100 " "%.
  • % of Natural Image Size: The percent value slider moves from " "1 to 800. It specifies the printout size in relation to the natural image " "size. A scaling of 100 percent will print the image at its natural size, " "while a scaling of 50 percent will print the image at half its natural " "size. If the specified scaling makes the image larger than the page, " "multiple pages will be printed. Scaling in % of natural image size defaults " "to 100 %.

Additional hint for power users: " "This TDEPrint GUI element matches with the CUPS commandline job option " "parameter: 

     -o natural-scaling=...     # range in  %  is "
"1....800  
     -o scaling=...             # range in  %  is 1....800  "
"
     -o ppi=...                 # range in ppi is 1...1200

" "" msgstr "" #: cups/kpimagepage.cpp:192 msgid "" "

Position Preview Thumbnail

This position preview " "thumbnail indicates the position of the image on the paper sheet.

Click " "on horizontal and vertical radio buttons to move image alignment on paper " "around. Options are:

  • center
  • top
    • " "
  • top-left
  • left
  • bottom-left
  • " "bottom
  • bottom-right
  • right
  • top-" "right

" msgstr "" #: cups/kpimagepage.cpp:210 msgid "" "

Reset to Default Values

Reset all coloration " "settings to default values. Default values are:

  • Brightness: 100 " "
  • Hue (Tint). 0
  • Saturation: 100
  • Gamma: " "1000

" msgstr "" #: cups/kpimagepage.cpp:222 msgid "" "

Image Positioning:

Select a pair of radiobuttons " "to move image to the position you want on the paper printout. Default is " "'center'.


Additional hint for power users: " "This TDEPrint GUI element matches with the CUPS commandline job option " "parameter: 

    -o position=...       # examples: \"top-left\" or "
"\"bottom\"

" msgstr "" #: cups/kpimagepage.cpp:237 msgid "Image" msgstr "Slika" #: cups/kpimagepage.cpp:239 msgid "Color Settings" msgstr "Postavke boja" #: cups/kpimagepage.cpp:241 msgid "Image Size" msgstr "Veličina slike" #: cups/kpimagepage.cpp:243 msgid "Image Position" msgstr "Položaj slike" #: cups/kpimagepage.cpp:247 msgid "&Brightness:" msgstr "&Svjetlina:" #: cups/kpimagepage.cpp:252 msgid "&Hue (Color rotation):" msgstr "Položaj boja" #: cups/kpimagepage.cpp:257 msgid "&Saturation:" msgstr "Zasićenje" #: cups/kpimagepage.cpp:262 msgid "&Gamma (Color correction):" msgstr "&Gama (korekcija boja)" #: cups/kpimagepage.cpp:283 msgid "&Default Settings" msgstr "Uo&bičajene postavke" #: cups/kpimagepage.cpp:289 msgid "Natural Image Size" msgstr "Prirodna veličina slike" #: cups/kpimagepage.cpp:290 msgid "Resolution (ppi)" msgstr "Razlučivost (ppi)" #: cups/kpimagepage.cpp:292 #, no-c-format msgid "% of Page" msgstr "% od stranice" #: cups/kpimagepage.cpp:294 #, no-c-format msgid "% of Natural Image Size" msgstr "% od prirodne veličine" #: cups/kpimagepage.cpp:304 msgid "&Image size type:" msgstr "Vrsta veličine slike" #: cups/kpschedulepage.cpp:40 msgid "" "

Print Job Billing and Accounting

Insert a meaningful " "string here to associate the current print job with a certain account. This " "string will appear in the CUPS \"page_log\" to help with the print " "accounting in your organization. (Leave it empty if you do not need it.)

" "It is useful for people who print on behalf of different \"customers\", like " "print service bureaux, letter shops, press and prepress companies, or " "secretaries who serve different bosses, etc.


" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: 

    -o "
"job-billing=...         # example: \"Marketing_Department\" or \"Joe_Doe\"  "
"

" msgstr "" #: cups/kpschedulepage.cpp:60 msgid "" "

Scheduled Printing

Scheduled printing lets you " "control the time of the actual printout, while you can still send away your " "job now and have it out of your way.

Especially useful is the " "\"Never (hold indefinitely)\" option. It allows you to park your job until a " "time when you (or a printer administrator) decides to manually release it. " "

This is often required in enterprise environments, where you normally " "are not allowed to directly and immediately access the huge production " "printers in your Central Repro Department. However it is okay to " "send jobs to the queue which is under the control of the operators (who, " "after all, need to make sure that the 10,000 sheets of pink paper which is " "required by the Marketing Department for a particular job are available and " "loaded into the paper trays).


Additional hint for " "power users: This TDEPrint GUI element matches with the CUPS " "commandline job option parameter: 

    -o job-hold-until=...      "
"# example: \"indefinite\" or \"no-hold\"

" msgstr "" #: cups/kpschedulepage.cpp:87 msgid "" "

Page Labels

Page Labels are printed by CUPS at the " "top and bottom of each page. They appear on the pages surrounded by a little " "frame box.

They contain any string you type into the line edit field.

" "

Additional hint for power users: This TDEPrint GUI " "element matches with the CUPS commandline job option parameter: " "

    -o page-label=\"...\"      # example: \"Company Confidential\"   
  "
msgstr ""

#: cups/kpschedulepage.cpp:102
msgid ""
"  
Job Priority
  
Usually CUPS prints all jobs per queue "
"according to the \"FIFO\" principle: First In, First Out. 
 The "
"job priority option allows you to re-order the queue according to your "
"needs. 
 It works in both directions: you can increase as well as decrease "
"priorities. (Usually you can only control your own jobs). 
 Since "
"the default job priority is \"50\", any job sent with, for example, \"49\" "
"will be printed only after all those others have finished. Conversely, a "
"\"51\" or higher priority job will go right to the top of a populated queue "
"(if no other, higher prioritized one is present).
 
  
  "
"
Additional hint for power users: This TDEPrint GUI element "
"matches  with the CUPS commandline job option parameter:  
    -o "
"job-priority=...   # example: \"10\" or \"66\" or \"99\"  
 
  "
msgstr ""

#: cups/kpschedulepage.cpp:126
msgid "Advanced Options"
msgstr "Napredne postavke"

#: cups/kpschedulepage.cpp:137
msgid "Immediately"
msgstr "Odmah"

#: cups/kpschedulepage.cpp:138
msgid "Never (hold indefinitely)"
msgstr "Nikad (drži zauvijek)"

#: cups/kpschedulepage.cpp:139
msgid "Daytime (6 am - 6 pm)"
msgstr "Daytime (6 am - 6 pm)"

#: cups/kpschedulepage.cpp:140
msgid "Evening (6 pm - 6 am)"
msgstr "Večer (6 pm - 6 am)"

#: cups/kpschedulepage.cpp:141
msgid "Night (6 pm - 6 am)"
msgstr "Noć (6 pm - 6 am)"

#: cups/kpschedulepage.cpp:142
msgid "Weekend"
msgstr "Vikend"

#: cups/kpschedulepage.cpp:143
msgid "Second Shift (4 pm - 12 am)"
msgstr "Druga smjena (4 pm - 12 am)"

#: cups/kpschedulepage.cpp:144
msgid "Third Shift (12 am - 8 am)"
msgstr "Treća smjena (0:00 - 8:00 sati)"

#: cups/kpschedulepage.cpp:145
msgid "Specified Time"
msgstr "Navedeno vrijeme"

#: cups/kpschedulepage.cpp:160
#, fuzzy
msgid "&Scheduled printing:"
msgstr "Ra&spored ispisa:"

#: cups/kpschedulepage.cpp:163
msgid "&Billing information:"
msgstr "&Podaci o trošku:"

#: cups/kpschedulepage.cpp:166
msgid "T&op/Bottom page label:"
msgstr "&Oznaka vrha/dna stranice:"

#: cups/kpschedulepage.cpp:169
msgid "&Job priority:"
msgstr "Važnost pos&la:"

#: cups/kpschedulepage.cpp:200
msgid "The time specified is not valid."
msgstr "Navedeno vrijeme nije ispravno."

#: cups/kptagspage.cpp:36
msgid ""
" 
Additional Tags
 You may send additional commands to the "
"CUPS server via this editable list.  There are 3 purposes for this: 
     "
"
  • Use any current or future standard CUPS job option not supported by the  "
"TDEPrint GUI. 
    •  
  • Control any custom job option you may want to "
"support in custom CUPS filters  and backends plugged into the CUPS filtering "
"chain.
    •   
  • Send short messages to the operators of your production "
"printers in your  Central Repro Department. 
  
Standard "
"CUPS job options: A complete list of standard CUPS job  options is in "
"the CUPS User Manual.  "
"Mappings of the kprinter user interface widgets to respective CUPS job "
"option  names are named in the various WhatsThis help items..
 "
"
Custom CUPS job options: CUPS print servers may be customized with "
"additional  print filters and backends which understand custom job options. "
"You can specify such  custom job options here. If in doubt, ask your system "
"administrator..
 
 
 
Operator Messages: You may "
"send additional messages to the operator(s) of your production printers (e."
"g. in your Central Repro Department
) Messages can be read by the "
"operator(s) (or yourself) by viewing the \"Job IPP Report\" for the "
"job.
 Examples:
 
 A standard CUPS job option:
    "
"(Name) number-up                -- (Value) 9                     
 
 A job option for custom CUPS filters or "
"backends:
    (Name) DANKA_watermark          -- (Value) "
"Company_Confidential   
 
 A message to the operator(s):
    "
"(Name) Deliver_after_completion -- (Value) to_Marketing_Departm."
"
 
 
Note: the fields must not include spaces, tabs or "
"quotes. You may need to  double-click on a field to edit it. 
Warning: Do not use such standard CUPS option names which also can be used  "
"through the TDEPrint GUI. Results may be  unpredictable if they conflict,  "
"or if they are sent multiple times. For all options supported by the GUI, "
"please do use  the GUI. (Each GUI element's  'WhatsThis' names the related "
"CUPS option name.) 
  "
msgstr ""

#: cups/kptagspage.cpp:77
msgid "Additional Tags"
msgstr "Dodatne odrednice"

#: cups/kptagspage.cpp:82 kpfilterpage.cpp:406 management/kmjobviewer.cpp:237
#: management/kmwend.cpp:51 management/kxmlcommanddlg.cpp:141
#: management/kxmlcommanddlg.cpp:545 tdefilelist.cpp:101
msgid "Name"
msgstr "Ime"

#: cups/kptagspage.cpp:83
msgid "Value"
msgstr "Vrijednost"

#: cups/kptagspage.cpp:92
msgid "Read-Only"
msgstr "Samo za čitanje"

#: cups/kptagspage.cpp:115
#, fuzzy
msgid "The tag name must not contain any spaces, tabs or quotes: %1."
msgstr "Naziv oznake ne može sadržati razmake: %1."

#: cups/kptextpage.cpp:41
msgid ""
"   
Characters Per Inch
  
This setting controls the "
"horizontal size of characters when printing a text file. 
 
The default "
"value is 10, meaning that the font is scaled in a way that 10 characters  "
"per inch will be printed. 
  
  
Additional hint for power "
"users: This TDEPrint GUI element matches  with the CUPS commandline job "
"option parameter:  
    -o cpi=...          # example: \"8\" or "
"\"12\"  
 
  "
msgstr ""

#: cups/kptextpage.cpp:55
msgid ""
"   
Lines Per Inch
  
This setting controls the vertical "
"size of characters when printing a text file. 
 
The default value is "
"6, meaning that the font is scaled in a way that 6 lines  per inch will be "
"printed. 
  
  
Additional hint for power users: This "
"TDEPrint GUI element matches  with the CUPS commandline job option parameter:"
"  
    -o lpi=...         # example \"5\" or \"7\"  
 
  "
msgstr ""

#: cups/kptextpage.cpp:69
msgid ""
"   
Columns
  
This setting controls how many columns of "
"text will be printed on each page when. printing text files. 
  
The "
"default value is 1, meaning that only one column of text per page  will be "
"printed. 
  
  
Additional hint for power users: This "
"TDEPrint GUI element matches  with the CUPS commandline job option parameter:"
"  
    -o columns=...     # example: \"2\" or \"4\"  
 
  "
msgstr ""

#: cups/kptextpage.cpp:84
msgid "   Preview icon changes when you turn on or off prettyprint.  "
msgstr ""

#: cups/kptextpage.cpp:87
msgid ""
"   
Text Formats
  
These settings control the appearance "
"of text on printouts. They are only valid for  printing text files or input "
"directly through kprinter. 
  
Note: These settings have no "
"effect whatsoever for other input formats than  text, or for printing from "
"applications such as the TDE Advanced Text Editor. (Applications  in general "
"send PostScript to the print system, and 'kate' in particular has its own  "
"knobs to control the print output. 
. 
  
Additional hint for "
"power users: This TDEPrint GUI element matches  with the CUPS "
"commandline job option parameter:  
     -o cpi=...         # "
"example: \"8\" or \"12\"  
     -o lpi=...         # example: \"5\" or "
"\"7\"  
     -o columns=...     # example: \"2\" or \"4\"  
 
  "
msgstr ""

#: cups/kptextpage.cpp:108
msgid ""
"   
Margins
  
These settings control the margins of "
"printouts on the paper. They are not valid for  jobs originating from "
"applications which define their own page layout internally and  send "
"PostScript to TDEPrint (such as KOffice, OpenOffice or LibreOffice). 
  "
"
When printing from TDE applications, such as KMail and Konqueror, or "
"printing an ASCII text  file through kprinter, you can choose your preferred "
"margin settings here. 
  
Margins may be set individually for each edge "
"of the paper. The combo box at the bottom lets you change  the units of "
"measurement between Pixels, Millimeters, Centimeters, and Inches. 
  "
"
You can even use the mouse to grab one margin and drag it to the intended "
"position (see the  preview picture on the right side). 
  
  "
"
Additional hint for power users: This TDEPrint GUI element "
"matches  with the CUPS commandline job option parameter:  
     -o "
"page-top=...      # example: \"72\"  
     -o page-bottom=...   # "
"example: \"24\"  
     -o page-left=...     # example: \"36\"  
     -"
"o page-right=...    # example: \"12\"  
 
  "
msgstr ""

#: cups/kptextpage.cpp:134
msgid ""
"   
Turn Text Printing with Syntax Highlighting (Prettyprint) On!
  
ASCII text file printouts can be 'prettyfied' by enabling this "
"option. If you do so,  a header is printed at the top of each page. The "
"header contains  the page number, job title (usually the filename), and the "
"date. In addition, C and  C++ keywords are highlighted, and comment lines "
"are italicized.
 
This prettyprint option is handled by CUPS.
  "
"
If you prefer another 'plaintext-to-prettyprint' converter, look for the "
"enscript  pre-filter on the Filters tab. 
 
  
  "
"
Additional hint for power users: This TDEPrint GUI element "
"matches  with the CUPS commandline job option parameter:  
     -o "
"prettyprint=true.  
 
  "
msgstr ""

#: cups/kptextpage.cpp:153
msgid ""
"   
Turn Text Printing with Syntax Highlighting (Prettyprint) Off! "
"
  
ASCII text file printing with this option turned off are "
"appearing without a page  header and without syntax highlighting. (You can "
"still set the page margins, though.) 
  
  
  
Additional "
"hint for power users: This TDEPrint GUI element matches  with the CUPS "
"commandline job option parameter:  
    -o prettyprint=false   
  "
msgstr ""

#: cups/kptextpage.cpp:167
msgid ""
"   
Print Text with Syntax Highlighting (Prettyprint)
  "
"
ASCII file printouts can be 'prettyfied' by enabling this option. If you "
"do so,  a header is printed at the top of each page. The header contains  "
"the page number, job title (usually the filename), and the date. In "
"addition, C and  C++ keywords are highlighted, and comment lines are "
"italicized.
 
This prettyprint option is handled by CUPS.
  
If "
"you prefer another 'plaintext-to-prettyprint' converter, look for the "
"enscript  pre-filter on the Filters tab. 
  
  
  "
"
Additional hint for power users: This TDEPrint GUI element "
"matches  with the CUPS commandline job option parameter:  
     -o "
"prettyprint=true.  
     -o prettyprint=false  
 
  "
msgstr ""

#: cups/kptextpage.cpp:188
msgid "Text"
msgstr "Tekst"

#: cups/kptextpage.cpp:191
msgid "Text Format"
msgstr "Format teksta"

#: cups/kptextpage.cpp:193
msgid "Syntax Highlighting"
msgstr "Osvjetljavanje sintakse"

#: cups/kptextpage.cpp:195 kpmarginpage.cpp:42 kpmarginpage.cpp:45
msgid "Margins"
msgstr "Margine"

#: cups/kptextpage.cpp:200
msgid "&Chars per inch:"
msgstr "&Znakova po inču:"

#: cups/kptextpage.cpp:204
msgid "&Lines per inch:"
msgstr "&Linija po inču:"

#: cups/kptextpage.cpp:208
msgid "C&olumns:"
msgstr "Stupaca:"

#: cups/kptextpage.cpp:216
msgid "&Disabled"
msgstr "O&nemogućeno"

#: cups/kptextpage.cpp:218
msgid "&Enabled"
msgstr "O&mogućeno"

#: driver.cpp:379 kpgeneralpage.cpp:261 lpd/lpdtools.cpp:307
#: management/kmconfiggeneral.cpp:44 management/kmpropgeneral.cpp:54
#: management/kmwend.cpp:49
msgid "General"
msgstr "Opće"

#: driver.cpp:387 foomatic2loader.cpp:268
msgid "Adjustments"
msgstr "Podešavanja"

#: driver.cpp:389
msgid "JCL"
msgstr "JCL"

#: driver.cpp:391 management/kmwlocal.cpp:60
msgid "Others"
msgstr "Ostalo"

#: driverview.cpp:47
msgid ""
"   List of Driver Options (from PPD).  
The upper pane of this "
"dialog page contains all printjob options as laid  down in the printer's "
"description file (PostScript Printer Description == 'PPD') 
 
Click on "
"any item in the list and watch the lower pane of this dialog page  display "
"the available values. 
  
Set the values as needed. Then use one of the "
"pushbuttons below to proceed:
  
      
  • 'Save' your settings "
"if you want to re-use  them in your next job(s) too. 'Save' will "
"store your settings permanently until  you change them again. 
    • . "
"
  • Click 'OK' (without a prior click on 'Save', if you "
"want to use  your selected settings just once, for the next print job. "
"'OK'  will forget your current settings when kprinter is closed "
"again, and will start next time  with the previously saved defaults. 
    •  "
"
  • 'Cancel' will not change anything. If you proceed to print "
"after clicking  'Cancel', the job will print with the default "
"settings of this queue.  
 
Note. The number of available job "
"options depends strongly on the actual  driver used for your print queue. "
"'Raw' queues do not have a driver or a   PPD. For raw queues this "
"tab page is not loaded by TDEPrint, and thus is not present  in the kprinter "
"dialog.
  "
msgstr ""

#: driverview.cpp:71
msgid ""
"   List of Possible Values for given Option (from PPD).  
The "
"lower pane of this dialog page contains all possible values of the "
"printoption  highlighted above, as laid  down in the printer's description "
"file (PostScript Printer Description == 'PPD') 
 
Select the value you "
"want and proceed. 
  
Then use one of the pushbuttons below to leave "
"this dialog:
  
      
  • 'Save' your settings if you want to re-"
"use  them in your next job(s) too. 'Save' will store your settings "
"permanently until  you change them again. 
    • . 
  • Click 'OK' if "
"you want to use your selected settings just once, for the  next print job. "
"'OK'  will forget your current settings when kprinter is closed "
"again, and will start next time  with your previous defaults. 
    •  "
"
  • 'Cancel' will not change anything. If you proceed to print "
"after clicking  'Cancel', the job will print with the default "
"settings of this queue.  
 
Note. The number of available job "
"options depends strongly on the actual  driver used for your print queue. "
"'Raw' queues do not have a driver or a   PPD. For raw queues this "
"tab page is not loaded by TDEPrint, and thus is not present  in the kprinter "
"dialog.
  "
msgstr ""

#: droptionview.cpp:61
msgid "Value:"
msgstr "Vrijednost:"

#: droptionview.cpp:167
msgid "String value:"
msgstr "String vrijednost:"

#: droptionview.cpp:306 droptionview.cpp:341
msgid "No Option Selected"
msgstr "Nema odabrane odrednice"

#: ext/kextprinterimpl.cpp:47
msgid "Empty print command."
msgstr "Prazna naredba pisača."

#: ext/kmextmanager.cpp:41
msgid "PS_printer"
msgstr "PS_pisač"

#: ext/kmextmanager.cpp:43
msgid "PostScript file generator"
msgstr "Generator PostScript datoteka"

#: foomatic/kfoomaticprinterimpl.cpp:51 lpdunix/klpdunixprinterimpl.cpp:72
msgid ""
"No valid print executable was found in your path. Check your installation."
msgstr ""
"U vašoj putanji nije nađena valjana izvršna datoteka. Provjerite instalaciju."

#: foomatic/kmfoomaticmanager.cpp:70
msgid "This is not a Foomatic printer"
msgstr "Ovo nije Superautomatik pisač"

#: foomatic/kmfoomaticmanager.cpp:75
msgid "Some printer information are missing"
msgstr "Neki podaci o pisaču nedostaju"

#: kmfactory.cpp:221
msgid "There was an error loading %1. The diagnostic is:
%2
"
msgstr "Greška kod učitavanja %1. Razlog je: 
%2
"

#: kmjob.cpp:114
msgid "Queued"
msgstr "Na čekanju (red)"

#: kmjob.cpp:117
msgid "Held"
msgstr "Zadržano"

#: kmjob.cpp:123
msgid "Canceled"
msgstr "Otkazano"

#: kmjob.cpp:126
msgid "Aborted"
msgstr "Prekinuto"

#: kmjob.cpp:129
msgid "Completed"
msgstr "Završeno"

#: kmmanager.cpp:70
msgid "This operation is not implemented."
msgstr "Ovaj postupak nije ugrađen."

#: kmmanager.cpp:169
msgid "Unable to locate test page."
msgstr "Nije moguće pronaći probnu stranicu."

#: kmmanager.cpp:449
msgid "Can't overwrite regular printer with special printer settings."
msgstr "Ne mogu prepisati obični pisač posebnim postavkama pisača."

#: kmmanager.cpp:478
#, c-format
msgid "Parallel Port #%1"
msgstr "Parelelni port br. %1"

#: kmmanager.cpp:486 kmmanager.cpp:502 kxmlcommand.cpp:661
#, c-format
msgid "Unable to load TDE print management library: %1"
msgstr "Nije moguće učitati TDE biblioteku za upravljanje pisačima: %1"

#: kmmanager.cpp:491 kxmlcommand.cpp:669
msgid "Unable to find wizard object in management library."
msgstr "Nije moguće pronaći objekt čarobnjaka u biblioteci upravljanja."

#: kmmanager.cpp:507
msgid "Unable to find options dialog in management library."
msgstr "Nije moguće pronaći dijalog opcija u biblioteci upravljanja."

#: kmmanager.cpp:534
msgid "No plugin information available"
msgstr "Nema dostupnih podataka u umetcima (plugin)"

#: kmprinter.cpp:144
msgid "(rejecting jobs)"
msgstr "(odbijanje poslova)"

#: kmprinter.cpp:144
msgid "(accepting jobs)"
msgstr "(prihvaćanje poslova)"

#: kmprinter.cpp:197 kprintdialog.cpp:983
msgid "All Files"
msgstr "Sve datoteke"

#: kmspecialmanager.cpp:53
msgid ""
"A file share/tdeprint/specials.desktop was found in your local TDE "
"directory. This file probably comes from a previous TDE release and should "
"be removed in order to manage global pseudo printers."
msgstr ""
"Datoteka share/tdeprint/specials.desktop je nađena u vašem lokalnom TDE "
"direktoriju. Vjerojatno potječe od prethodne inačice TDE-a i treba je "
"maknuti da biste mogli namjestiti globalne pseudo pisače."

#: kmuimanager.cpp:158
#, c-format
msgid "Configuration of %1"
msgstr "Podešenja %1"

#: kmvirtualmanager.cpp:161
msgid ""
"You are about to set a pseudo-printer as your personal default. This "
"setting is specific to TDE and will not be available outside TDE "
"applications. Note that this will only make your personal default printer as "
"undefined for non-TDE applications and should not prevent you from printing "
"normally. Do you really want to set %1 as your personal default?"
msgstr ""
"Postavit ćete pseudo-pisač kao vašu uobičajeni pisač. Ova postavka je "
"specifična za TDE i neće biti dostupna izvan TDE aplikacija. Primjetite da  "
"vaš pisač neće prepoznavati samo ne-TDE aplikacije i neće vam onemogućiti "
"normalno ispisivanje. Želite li zaista postaviti %1 kao vaš "
"uobičajeni pisač?"

#: kmvirtualmanager.cpp:166 management/kminstancepage.cpp:91
msgid "Set as Default"
msgstr "Postavi kao uobičajeno"

#: kpcopiespage.cpp:46
#, fuzzy
msgid ""
" 
Page Selection
  
Here you can control if you print a "
"certain selection only out of all the pages from the complete document. 
 "
""
msgstr ""
" Ovdje možete podesiti ispis samo odabranog dijela svih stranica "
"dokumenta."

#: kpcopiespage.cpp:51
#, fuzzy
msgid ""
" All Pages: Select \"All\" to print the complete document. Since "
"this is the default, it is pre-selected. 
 "
msgstr ""
" Odaberite \"Sve\" da ispišete cijeli dokument. Budući da je ovo "
"postavljena vrijednost, već je odabrana."

#: kpcopiespage.cpp:55
msgid ""
" Current Page: Select \"Current\" if you want  to print "
"the page currently visible in your TDE application.
 
Note: this "
"field is disabled if you print from non-TDE applications like Firefox, "
"PaleMoon, SeaMonkey or OpenOffice and LibreOffice, since here TDEPrint has "
"no means to determine which document page you are currently viewing.
"
msgstr ""

#: kpcopiespage.cpp:61
msgid ""
" Page Range: Choose a \"Page Range\" to select a subset of the "
"complete document pages to be printed. The format is \"n,m,o-p,q,r,s-t, u"
"\".
 
Example: \"4,6,10-13,17,20,23-25\" will "
"print the pages 4, 6, 10, 11, 12, 13, 17, 20, 23, 24, 25 of your document. 
  
  
Additional hint for power users: This TDEPrint "
"GUI element matches  with the CUPS commandline job option parameter:  "
"
    -o page-ranges=...     # example: \"4,6,10-13,17,20,23-25\"  
 "
"
 "
msgstr ""

#: kpcopiespage.cpp:75
msgid ""
" Page Set: 
Choose \"All Pages\", \"Even Pages\" or \"Odd Pages\" if you want to print a page selection matching "
"one of these terms. The default is \"All Pages\".
 
Note: If you combine a selection of a \"Page Range\" with a \"Page "
"Set\" of \"Odd\" or \"Even\", you will only get the "
"odd or even pages from the originally selected page range. This is useful if "
"you odd or even pages from the originally selected page range. This is "
"useful if you want to print a page range in duplex on a simplex-only "
"printer. In this case you can feed the paper to the printer twice; in the "
"first pass, select \"Odd\" or \"Even\" (depending on your printer model), in "
"second pass select the other option. You may need to \"Reverse\" "
"the output in one of the passes (depending on your printer model).
  "
"
  
  
Additional hint for power users: This TDEPrint GUI "
"element matches  with the CUPS commandline job option parameter:  "
"
    -o page-set=...        # example: \"odd\" or \"even\"  
 
  "
""
msgstr ""

#: kpcopiespage.cpp:98
msgid ""
" Output Settings: Here you can determine the number of copies, "
"the output order and the collate mode for the pages of your printjob. (Note, "
"that the maximum number of copies  allowed to print may be restricted by "
"your print subsystem.)
 
The 'Copies' setting defaults to 1. 
  "
"
  
  
Additional hint for power users: This TDEPrint GUI "
"element matches  with the CUPS commandline job option parameter:  "
"
     -o copies=...            # examples: \"5\" or \"42\"  
     -o "
"outputorder=...       # example:  \"reverse\" 
     -o "
"Collate=...           # example:  \"true\" or \"false\"  
 
 ."
msgstr ""

#: kpcopiespage.cpp:116
#, fuzzy
msgid ""
" Number of Copies: Determine the number of requested copies here. "
"You can increase or decrease the number of printed copies by clicking on the "
"up and down arrows. You can also type the figure directly into the box. 
 "
"
  
  
Additional hint for power users: This TDEPrint GUI "
"element matches  with the CUPS commandline job option parameter:  "
"
     -o copies=...            # examples: \"5\" or \"42\"  
 
  "
""
msgstr ""
" Odredite broj željenih primjeraka ovdje. Možete povećati ili smanjiti "
"broj klikajući na strelice za gore ili dolje. Također možete izravno unijeti "
"broj u kućicu."

#: kpcopiespage.cpp:129
msgid ""
" Collate Copies 
If the \"Collate\" checkbox is "
"enabled (default), the output order for multiple copies of a multi-page "
"document will be \"1-2-3-..., 1-2-3-..., 1-2-3-...\".
 
If the "
"\"Collate\" checkbox is disabled, the output order for multiple copies "
"of a multi-page document will be \"1-1-1-..., 2-2-2-..., 3-3-3-...\".
 "
"
  
  
Additional hint for power users: This TDEPrint GUI "
"element matches  with the CUPS commandline job option parameter:  "
"
    -o Collate=...           # example:  \"true\" or \"false\"  
 "
"
  "
msgstr ""

#: kpcopiespage.cpp:143
msgid ""
" Reverse Order 
 If the \"Reverse\" checkbox is "
"enabled, the output order for multiple copies of a multi-page document will "
"be \"...-3-2-1, ...-3-2-1, ...-3-2-1\", if you also have enabled "
"the \"Collate\" checkbox at the same time (the usual usecase).
 "
"
If the \"Reverse\" checkbox is enabled, the output order for "
"multiple copies of a multi-page document will be "
"\"...-3-3-3, ...-2-2-2, ...-1-1-1\", if you have disabled the "
"\"Collate\" checkbox at the same time. 
 
  
  "
"
Additional hint for power users: This TDEPrint GUI element "
"matches  with the CUPS commandline job option parameter:  
    -o "
"outputorder=...       # example:  \"reverse\"  
 
  "
msgstr ""

#: kpcopiespage.cpp:164
msgid "C&opies"
msgstr "Kopije"

#: kpcopiespage.cpp:168
msgid "Page Selection"
msgstr "Izbor stranica"

#: kpcopiespage.cpp:170
msgid "&All"
msgstr "&Sve"

#: kpcopiespage.cpp:172
msgid "Cu&rrent"
msgstr "T&renutno"

#: kpcopiespage.cpp:174
msgid "Ran&ge"
msgstr "&Granice"

#: kpcopiespage.cpp:179
msgid ""
"
Enter pages or group of pages to print separated by commas (1,2-5,8).
"
msgstr ""
"
Unesite stranice ili grupu stranica za ispis, odvojene zarezima (1,2-5,8)."
"
"

#: kpcopiespage.cpp:183
#, fuzzy
msgid "Output Settings"
msgstr "Postavke ograničenja"

#: kpcopiespage.cpp:185
msgid "Co&llate"
msgstr "&Kruži"

#: kpcopiespage.cpp:187
msgid "Re&verse"
msgstr "O&brnuti redoslijed"

#: kpcopiespage.cpp:192
msgid "Cop&ies:"
msgstr "Kop&ija:"

#: kpcopiespage.cpp:199
msgid "All Pages"
msgstr "Sve stranice"

#: kpcopiespage.cpp:200
msgid "Odd Pages"
msgstr "Neparne stranice"

#: kpcopiespage.cpp:201
msgid "Even Pages"
msgstr "Parne stranice"

#: kpcopiespage.cpp:203
msgid "Page &set:"
msgstr "&Skup stranica:"

#: kpcopiespage.cpp:258
msgid "Pages"
msgstr "Stranice"

#: kpdriverpage.cpp:30 management/kmpropdriver.cpp:54
msgid "Driver Settings"
msgstr "Postavke upravljača"

#: kpdriverpage.cpp:48
#, fuzzy
msgid ""
"Some options selected are in conflict. You must resolve these conflicts "
"before continuing. See Driver Settings tab for detailed information."
msgstr ""
"Neke od odabranih odrednica su proturječne. Morate riješiti te sukobe "
"prije nastavka. Pogledajte pod Napredno za detaljnije informacije."

#: kpfileselectpage.cpp:33
msgid "&Files"
msgstr "&Datoteke"

#: kpfilterpage.cpp:42
msgid ""
"  Add Filter button 
This button calls a little dialog to let "
"you select a filter here. 
 
Note 1: You can chain different "
"filters as long as you make  sure that the output of one fits as input of "
"the next. (TDEPrint  checks your filtering chain and will warn you if you "
"fail to do so.
  
Note 2: The filters you define here are "
"applied to your jobfile  before it is handed downstream to "
"your spooler and print  subsystem (e.g. CUPS, LPRng, LPD).
  "
msgstr ""

#: kpfilterpage.cpp:54
#, fuzzy
msgid ""
"  Remove Filter button 
This button removes the highlighted "
"filter from the list of filters. "
msgstr ""
"Ovaj gumb uklanja osvjetljenu datoteku iz popisa datoteka za tiskanje."

#: kpfilterpage.cpp:59
#, fuzzy
msgid ""
"  Move Filter Up button 
This button moves the highlighted "
"filter up in the list of filters, towards the front of the filtering chain. "
"
 "
msgstr ""
"Ovaj gumb pomiče osvjetljenu datoteku za jedno mjesto na gore u listi "
"datoteka za tiskanje. Pojednostavljeno, ovo mijenja poredak datoteka za "
"tiskanje)."

#: kpfilterpage.cpp:64
#, fuzzy
msgid ""
"  Move Filter Down button 
This button moves the highlighted "
"filter down in the list of filters, towards the end of the filtering chain.."
"
 "
msgstr ""
"Ovaj gumb pomiče osvjetljenu datoteku za jedno mjesto na gore u listi "
"datoteka za tiskanje. Pojednostavljeno, ovo mijenja poredak datoteka za "
"tiskanje)."

#: kpfilterpage.cpp:69
#, fuzzy
msgid ""
"  Configure Filter button 
This button lets you configure the "
"currently highlighted filter. It opens a separate dialog.  
 "
msgstr ""
"Ovaj gumb uklanja osvjetljenu datoteku iz popisa datoteka za tiskanje."

#: kpfilterpage.cpp:75
msgid ""
"  Filter Info Pane 
This field shows some general info about "
"the selected filter.  Amongst them are:  
      
  • the filter name "
"(as displayed in the TDEPrint user interface); 
    •   
  • the filter "
"requirements (that is the external program that needs  to present and "
"executable on this system); 
    •   
  • the filter input format (in "
"the form of one or several MIME types accepted by the filter);   
  • the filter output format (in the form of a MIME type  generated by the filter); 
    •   
  • a more or less verbose text "
"describing the filter's operation.
    •   
  
 "
msgstr ""

#: kpfilterpage.cpp:91
msgid ""
"  Filtering Chain (if enabled, is run before actual  job "
"submission to print system) 
This field shows which filters are currently "
"selected to act as 'pre-filters'  for TDEPrint. Pre-filters are processing "
"the print files before they are  send downstream to your real print "
"subsystem. 
  
The list shown in this field may be empty (default).   
The pre-filters act on the printjob in the order they are listed "
"(from top to bottom).  This is done by acting as a filtering chain "
"where the output of one filter  acts as input to the next. By putting the "
"filters into the wrong order, you can make  the filtering chain fail. For "
"example: if your file is ASCII text, and you want the  output being "
"processed by the 'Multipage per Sheet' filter, the first filter must be  one "
"that processes ASCII into PostScript. 
  
TDEPrint can utilize any external filtering program which you may find useful  through this "
"interface. 
  
TDEPrint ships preconfigured with support for a "
"selection of common filters. These  filters however need to be  installed "
"independently from TDEPrint. These pre-filters work for all print "
"subsystems supported by TDEPrint (such as CUPS, LPRng and LPD), because they "
"are not depending on these.
 .
 Amongst the pre-configured filters "
"shipping with TDEPrint are: 
  
      
  • the Enscript text filter  
    •   
  • a Multiple Pages per Sheet filter  
  • a "
"PostScript to PDF converter.
    •   
  • a Page Selection/"
"Ordering filter.
    •   
  • a Poster Printing filter.
    •   "
"
  • and some more..
    •   
  To insert a filter into this list, simply "
"click on the funnel icon (topmost on  the right icon column group) "
"and proceed. 
 
Please click on the other elements of this dialog to "
"learn more about the TDEPrint  pre-filters.  
 "
msgstr ""

#: kpfilterpage.cpp:125
msgid "Filters"
msgstr "Filteri"

#: kpfilterpage.cpp:141
msgid "Add filter"
msgstr "Dodaj filter"

#: kpfilterpage.cpp:146
msgid "Remove filter"
msgstr "Makni filter"

#: kpfilterpage.cpp:151
msgid "Move filter up"
msgstr "Pomakni filter gore"

#: kpfilterpage.cpp:156
msgid "Move filter down"
msgstr "Pomakni filter dolje"

#: kpfilterpage.cpp:161
msgid "Configure filter"
msgstr "Podesi filter"

#: kpfilterpage.cpp:279
msgid "Internal error: unable to load filter."
msgstr "Interna pogreška: Nije moguće učitati filtar."

#: kpfilterpage.cpp:394
msgid ""
"
The filter chain is wrong. The output format of at least one filter is "
"not supported by its follower. See Filters tab for more information."
msgstr ""

#: kpfilterpage.cpp:407 management/kxmlcommanddlg.cpp:840
msgid "Requirements"
msgstr "Zahtjevi"

#: kpfilterpage.cpp:408
msgid "Input"
msgstr "Ulaz"

#: kpfilterpage.cpp:409 tools/escputil/escpwidget.cpp:217
msgid "Output"
msgstr "Izlaz"

#: kpgeneralpage.cpp:86
msgid "ISO A4"
msgstr "ISO A4"

#: kpgeneralpage.cpp:87 lpd/lpdtools.cpp:30 util.h:72
msgid "US Letter"
msgstr "US pismo"

#: kpgeneralpage.cpp:88 lpd/lpdtools.cpp:29 util.h:71
msgid "US Legal"
msgstr "US pravno"

#: kpgeneralpage.cpp:89 lpd/lpdtools.cpp:28 util.h:69
msgid "Ledger"
msgstr "Knjiga salda"

#: kpgeneralpage.cpp:90 util.h:68
msgid "Folio"
msgstr "Folio"

#: kpgeneralpage.cpp:91
msgid "US #10 Envelope"
msgstr "US #10 omotnica"

#: kpgeneralpage.cpp:92
msgid "ISO DL Envelope"
msgstr "ISO DL omotnica"

#: kpgeneralpage.cpp:93 util.h:70
msgid "Tabloid"
msgstr "Tabloid"

#: kpgeneralpage.cpp:94
msgid "ISO A3"
msgstr "ISO A3"

#: kpgeneralpage.cpp:95
msgid "ISO A2"
msgstr "ISO A2"

#: kpgeneralpage.cpp:96
msgid "ISO A1"
msgstr "ISO A1"

#: kpgeneralpage.cpp:97
msgid "ISO A0"
msgstr "ISO A0"

#: kpgeneralpage.cpp:107
msgid "Upper Tray"
msgstr "Gornja ladica"

#: kpgeneralpage.cpp:108
msgid "Lower Tray"
msgstr "Donja ladica"

#: kpgeneralpage.cpp:109
msgid "Multi-Purpose Tray"
msgstr "Višenamjenska ladica"

#: kpgeneralpage.cpp:110
msgid "Large Capacity Tray"
msgstr "Ladica velikog kapaciteta"

#: kpgeneralpage.cpp:114
msgid "Normal"
msgstr "Normalno"

#: kpgeneralpage.cpp:115
msgid "Transparency"
msgstr "Prozirna folija"

#: kpgeneralpage.cpp:124
msgid ""
"   
\"General\" 
  
This dialog page contains general print job settings. General settings are applicable to most printers, "
"most jobs  and most job file types.  
To get more specific help, enable "
"the \"WhatsThis\" cursor and click on any of the  text labels or GUI "
"elements of this dialog.  "
msgstr ""

#: kpgeneralpage.cpp:132
msgid ""
"   
Page size: Select paper size to be printed on from  the "
"drop-down menu. 
 
The exact list of choices depends on the printer "
"driver (\"PPD\") you have installed.
  
  
  
Additional "
"hint for power users: This TDEPrint GUI element matches  with the CUPS "
"commandline job option parameter:  
    -o PageSize=...         # "
"examples: \"A4\" or \"Letter\"  
 
  "
msgstr ""

#: kpgeneralpage.cpp:145
msgid ""
"   
Paper type: Select paper type to be printed on from  the "
"drop-down menu. 
 
The exact list of choices depends on the printer "
"driver (\"PPD\") you have installed. 
 
  
  
Additional "
"hint for power users: This TDEPrint GUI element matches  with the CUPS "
"commandline job option parameter:  
    -o MediaType=...        # "
"example: \"Transparency\"  
 
  "
msgstr ""

#: kpgeneralpage.cpp:158
msgid ""
"   
Paper source: Select paper source tray for the paper to be "
"printed on from the drop-down menu.  
The exact list of choices depends on "
"the printer driver (\"PPD\") you have installed. 
 
  
  "
"
Additional hint for power users: This TDEPrint GUI element "
"matches  with the CUPS commandline job option parameter:  
    -o "
"InputSlot=...        # examples: \"Lower\" or \"LargeCapacity\"  
   "
msgstr ""

#: kpgeneralpage.cpp:171
msgid ""
"   
Image Orientation: Orientation of the printed  page image "
"on your paper is controlled by the radio buttons. By default,  the "
"orientation is Portrait  
You can select 4 alternatives:  
      "
"
  •  Portrait..Portrait is the default setting. 
    •   
  •  "
"Landscape. 
    •   
  •  Reverse Landscape. Reverse Landscape "
"prints the images upside down. 
    •   
  •  Reverse Portrait. Reverse "
"Portrait prints the image upside down.
    •   
  The icon changes "
"according to your selection.
 
  
  
Additional hint for "
"power users: This TDEPrint GUI element matches  with the CUPS "
"commandline job option parameter:  
    -o orientation-"
"requested=...       # examples: \"landscape\" or \"reverse-portrait\"   
  "
msgstr ""

#: kpgeneralpage.cpp:192
msgid ""
"   
Duplex Printing: These controls may be grayed out if your "
"printer  does not support duplex printing (i.e. printing on both "
"sides of the sheet).  These controls are active if your printer supports "
"duplex printing.  
  You can choose from 3 alternatives: 
 
      
  •  "
"None. This prints each page of the job on one side of the sheets "
"only. 
    •   
  •  Long Side. This prints the job on both sides of the "
"paper sheets.  It prints the job in a way so that the backside has the same "
"orientation as the front  side if you turn the paper over the long edge. "
"(Some printer drivers name this mode  duplex-non-tumbled).  
    •   "
"
  •  Short Side. This prints the job on both sides of the paper "
"sheets.  It prints the job so that the backside has the reverse orientation "
"from the front  side if you turn the paper over the long edge, but the same "
"orientation, if you turn it over  the short edge. (Some printer drivers name "
"this mode  duplex-tumbled).  
    •   
  
  "
"
Additional hint for power users: This TDEPrint GUI element "
"matches  with the CUPS commandline job option parameter:  
    -o "
"duplex=...       # examples: \"tumble\" or \"two-sided-short-edge\"  
 "
"
  "
msgstr ""

#: kpgeneralpage.cpp:218
msgid ""
"   
Banner Page(s): Select banner(s) to print one or two "
"special sheets  of paper just before or after your main job. 
 
Banners "
"may contain some pieces of job information, such as user name, time of "
"printing, job title and more. 
 
Banner pages are useful to separate "
"different jobs more easily, especially in a multi-user  environment. 
 "
"
Hint: You can design your own banner pages. To make use "
"of them, just put the banner  file into the standard CUPS banners "
"directory (This is usually \"/usr/share/cups/banner/\"  Your custom "
"banner(s) must have one of the supported printable formats.  Supported "
"formats are ASCII text, PostScript, PDF and nearly any image format such as "
"PNG, JPEG or  GIF. Your added banner pages will appear in the drop down menu "
"after a restart of CUPS. 
 
CUPS comes with a selection of banner "
"pages. 
 
  
  
Additional hint for power users: This "
"TDEPrint GUI element matches  with the CUPS commandline job option parameter:"
"  
    -o job-sheets=...       # examples: \"standard\" or "
"\"topsecret\"  
 
  "
msgstr ""

#: kpgeneralpage.cpp:240
msgid ""
"   
Pages per Sheet:  You can choose to print more than one "
"page onto each sheet of paper.  This is sometimes useful to save paper. 
 "
"
Note 1: the page images get scaled down accordingly to print 2 or "
"4 pages per sheet.  The page image does not get scaled if you print 1 page "
"per sheet (the default setting.).  
Note 2: If you select multiple "
"pages per sheet here, the scaling and re-arranging is done  by your printing "
"system. Be aware, that some printers can by themselves print multiple pages "
"per sheet.  In this case you find the option in the printer driver settings. "
"Be careful: if you enable multiple  pages per sheet in both places, your "
"printout will not look as you intended. 
 
  
  "
"
Additional hint for power users: This TDEPrint GUI element "
"matches  with the CUPS commandline job option parameter:  
    -o "
"number-up=...        # examples: \"2\" or \"4\"  
 
  "
msgstr ""

#: kpgeneralpage.cpp:264 kpqtpage.cpp:118
msgid "Page s&ize:"
msgstr "Vel&ičina papira:"

#: kpgeneralpage.cpp:268
msgid "Paper t&ype:"
msgstr "Vrst&a papira:"

#: kpgeneralpage.cpp:272
msgid "Paper so&urce:"
msgstr "I&zvor papira:"

#: kpgeneralpage.cpp:292
msgid "Duplex Printing"
msgstr "Dvostrano ispisivanje"

#: kpgeneralpage.cpp:295 kpqtpage.cpp:143
msgid "Pages per Sheet"
msgstr "Stranica po listu"

#: kpgeneralpage.cpp:301 kpqtpage.cpp:125
msgid "&Portrait"
msgstr "Us&pravno"

#: kpgeneralpage.cpp:302 kpqtpage.cpp:128
msgid "&Landscape"
msgstr "Po&loženo"

#: kpgeneralpage.cpp:303
msgid "&Reverse landscape"
msgstr "Ob&rnut položaj"

#: kpgeneralpage.cpp:304
msgid "R&everse portrait"
msgstr "Ob&rnuti redoslijed"

#: kpgeneralpage.cpp:309
msgid ""
"_: duplex orientation\n"
"&None"
msgstr "&Nijedna"

#: kpgeneralpage.cpp:310
msgid ""
"_: duplex orientation\n"
"Lon&g side"
msgstr "Du&gom stranicom"

#: kpgeneralpage.cpp:311
msgid ""
"_: duplex orientation\n"
"S&hort side"
msgstr "&Kraća strana"

#: kpgeneralpage.cpp:323
msgid "S&tart:"
msgstr "Poče&tak:"

#: kpgeneralpage.cpp:324
msgid "En&d:"
msgstr "Kra&j:"

#: kpgeneralpage.cpp:416 lpd/lpdtools.cpp:40 management/kmconfiggeneral.cpp:52
msgid "Disabled"
msgstr "Onemogućeno"

#: kpgeneralpage.cpp:417 lpd/lpdtools.cpp:39 lpr/editentrydialog.cpp:50
msgid "Enabled"
msgstr "Omogućeno"

#: kpposterpage.cpp:42
msgid "   5.  "
msgstr ""

#: kpposterpage.cpp:46
msgid ""
"   Print Poster (enabled or disabled).  
If you enable this "
"option, you can print posters of different sizes  The printout will happen "
"in the form 'tiles' printed on smaller  paper sizes, which you can "
"stitch together later. If you enable this  option here, the 'Poster "
"Printing' filter will be auto-loaded in  the 'Filters' tab of this "
"dialog. 
 
This tab is only visible if the external 'poster' "
"utility is  discovered by TDEPrint on your system. ['poster' is a "
"commandline  utility that enables you to convert PostScript files into tiled "
"printouts  which allow for oversized appearance of the stitched-together "
"tiles.] 
 
Note: The standard version of 'poster' will not work. "
"Your system  must use a patched version of 'poster'. Ask your operating "
"system vendor to  provide a patched version of 'poster' if he does not "
"already. 
 "
msgstr ""

#: kpposterpage.cpp:62
msgid ""
"   Tile Selection widget  
This GUI element is not only for "
"viewing your selections: it also  lets you interactively select the "
"tile(s) you want to print.  
 
Hints  
      
  • Click any tile "
"to select it for printing.
    •   
  • To select multiple tiles to be printed  "
"at once, 'shift-click' on the tiles ('shift-click' means: hold down "
"the  [SHIFT]-key on your keyboard and click with the mouse while [SHIFT]-key "
"is held.)   Be aware that the order  of your clicking is also "
"significant to the order of printing the different tiles. 
    •  
  "
"Note 1: The order of your selection (and the order for printout of "
"the tiles)  is indicated by the contents of the text field below,  labelled "
"as 'Tile pages (to be printed):'
 Note 2: By default no "
"tile is selected. Before you can print (a part  of) your poster, you must "
"select at least one tile. 
  "
msgstr ""

#: kpposterpage.cpp:83
msgid ""
"   Poster Size  
Select the poster size you want from the "
"dropdown list. 
  Available sizes are all standard paper sizes up to  "
"'A0'. [A0 is the same size as 16 sheets of A4, or '84cm x 118.2cm'.] 
  "
"
Notice, how the little preview window below changes with your "
"change of poster  size. It indicates to you how many tiles need to be "
"printed to make the poster,  given the selected paper size.
   
Hint:"
" The little preview window below is not just a passive icon. You can "
"click  on its individual tiles to select them for printing. To select "
"multiple tiles to be printed  at once, you need to 'shift-click' on "
"the tiles ('shift-click' means: hold down the  [SHIFT]-key on your keyboard "
"and click with the mouse while [SHIFT]-key is held.) The order  of your "
"clicking is significant to the order of printing the different tiles. The "
"order of  your selection (and for the printed tiles) is indicated by the "
"contents of the text field  labelled as 'Tile pages (to be printed):'
 Note: By default no tile is selected. Before you can print (a "
"part  of) your poster, you must select at least one tile. 
  "
msgstr ""

#: kpposterpage.cpp:102
msgid ""
"   Paper Size  
This field indicates the paper size the poster "
"tiles will be printed on.  To select a different paper size for your poster "
"tiles, go to the 'General' tab  of this dialog and select one from the "
"dropdown list. 
  Available sizes are most standard paper sizes supported "
"by your printer. Your printer's  supported paper sizes are read from the "
"printer driver info (as laid down in the 'PPD',  the printer "
"description file). Be aware that the 'Paper Size' selected may not be "
"supported  by 'poster' (example: 'HalfLetter') while it may well be "
"supported by your printer.  If  you hit that obstacle, simply use "
"another, supported Paper Size, like 'A4' or 'Letter'.  
Notice, how "
"the little preview window below changes with your change of paper  size. It "
"indicates how many tiles need to be printed to make up the poster,  given "
"the selected paper and poster size.
   
Hint: The little preview "
"window below is not just a passive icon. You can click  on its individual "
"tiles to select them for printing. To select multiple tiles to be printed  "
"at once, you need to 'shift-click' on the tiles ('shift-click' "
"means: hold down the  [SHIFT]-key on your keyboard and click with the mouse "
"while [SHIFT]-key is held.) The order  of your clicking is significant to "
"the order of printing the different tiles. The order of  your selection (and "
"for the printed tiles) is indicated by the contents of the text field  "
"labelled as 'Tile pages (to be printed):'
 Note: By "
"default no tile is selected. Before you can print (a part  of) your poster, "
"you must select at least one tile. 
  "
msgstr ""

#: kpposterpage.cpp:126
msgid ""
"   Cut Margin selection  
Slider and spinbox let you determine "
"a 'cut margin' which will be printed onto  each tile of your poster "
"to help you cut the pieces as needed. 
 
Notice, how the little "
"preview window above changes with your change of cut  margins. It indicates "
"to you how much space the cut margins will take away from each tile.  "
"
Be aware, that your cut margins need to be equal to or greater "
"than the margins your  printer uses. The printer's capabilities are "
"described in the 'ImageableArea'  keywords of its driver PPD file. "
"
  "
msgstr ""

#: kpposterpage.cpp:137
msgid ""
"   Order and number of tile pages to be printed  
This field "
"displays and sets the individual tiles to be printed, as well as the order  "
"for their printout. 
  You can file the field with 2 different methods:  "
"
      
  • Either use the interactive thumbnail preview above and '[SHIFT]-"
"click' on the tiles. 
    •   
  • Or edit this text field accordingly. 
    •   "
"
  
When editing the field, you can use a '3-7' syntax instead of a "
"'3,4,5,6,7' one. 
  
Examples:
  
    \"2,3,7,9,3\"  "
"
    \"1-3,6,8-11\"  "
msgstr ""

#: kpposterpage.cpp:154
msgid "Poster"
msgstr "Poster"

#: kpposterpage.cpp:156
msgid "&Print poster"
msgstr "Naslov ispisa"

#: kpposterpage.cpp:170
msgid "Poste&r size:"
msgstr "Vel&ičina postera:"

#: kpposterpage.cpp:172
msgid "Media size:"
msgstr "Veličina papira:"

#: kpposterpage.cpp:174
msgid "Pri&nt size:"
msgstr "Veličina ispisa:"

#: kpposterpage.cpp:181
#, no-c-format
msgid "C&ut margin (% of media):"
msgstr "&Odreži marginu (% medija):"

#: kpposterpage.cpp:185
msgid "&Tile pages (to be printed):"
msgstr "&Naslovne stranice (za ispis):"

#: kpposterpage.cpp:192
msgid "Link/unlink poster and print size"
msgstr "Poveži/razveži veličinu postera i veličinu ispisa"

#: kpposterpage.cpp:257
msgid "Unknown"
msgstr "Nepoznat"

#: kpqtpage.cpp:70
msgid ""
"   Selection of color mode: You can choose between 2 options:  "
"
  • Color and
    •   
  • Grayscale
  Note: "
"This selection field may be grayed out and made inactive.  This happens if "
"TDEPrint can not retrieve  enough information about your print file. In this "
"case the embedded color- or grayscale information  of your printfile, and "
"the default handling of the printer take precedence.  "
msgstr ""

#: kpqtpage.cpp:79
msgid ""
"   Selection of page size: Select paper size to be printed on "
"from  the drop-down menu.  
The exact list of choices depends on the "
"printer driver (\"PPD\") you have installed.  "
msgstr ""

#: kpqtpage.cpp:84
msgid ""
"   Selection of pages per sheet:  You can choose to print more "
"than one page onto each sheet of paper.  This is sometimes useful to save "
"paper.  
Note 1: the page images get scaled down accordingly to "
"print 2 or 4 pages per sheet.  The page image does not get scaled if you "
"print 1 page per sheet (the default setting.).  
Note 2: If you "
"select multiple pages per sheet here, the scaling and re-arranging is done  "
"by your printing system.  
Note 3, regarding \"Other\": You cannot "
"really select Other as the number of  pages to print on one sheet."
"\"Other\" is checkmarked here for information purposes only.  
To select "
"8, 9, 16 or other numbers of  pages per sheet:  
      
  •  go to the tab "
"headlined \"Filter\"
    •  
  •  enable the Multiple Pages per Sheet "
"filter 
    •  
  •  and configure it (bottom-most button on the right of the "
"\"Filters\" tab). 
    •  
 "
msgstr ""

#: kpqtpage.cpp:102
msgid ""
"   Selection of image orientation: Orientation of the printed  "
"pageimage on your paper is controlled by the radio buttons. By default,  the "
"orientation is Portrait  
You can select 2 alternatives:  
      "
"
  •  Portrait..Portrait is the default setting. 
    •   
  •  "
"Landscape. 
    •   
  The icon changes according to your "
"selection. "
msgstr ""

#: kpqtpage.cpp:113
msgid "Print Format"
msgstr "Format ispisa"

#: kpqtpage.cpp:123
msgid "Color Mode"
msgstr "Ispis boja"

#: kpqtpage.cpp:135
msgid "Colo&r"
msgstr "Boj&e"

#: kpqtpage.cpp:138
msgid "&Grayscale"
msgstr "&Sivi tonovi"

#: kpqtpage.cpp:151
msgid "Ot&her"
msgstr "Os&talo"

#: kprintaction.cpp:117 kprintaction.cpp:122 kprintaction.cpp:127
msgid "&Export..."
msgstr "&Izvoz..."

#: kprintdialog.cpp:97
msgid ""
" Printer Location: The Location may describe where the "
"selected printer is located. The Location description is created by the "
"administrator of the print system (or may be left empty). "
msgstr ""
" Lokacija pisača:Lokacija može opisivati mjesto fizičkog "
"smještaja pisača. Opis lokacije izrađuje administrator ispisnog sustava "
"(može se ostaviti praznom). "

#: kprintdialog.cpp:102
#, fuzzy
msgid ""
" Printer Type:  The Type indicates your printer type. "
msgstr "  Tip kazuje tip vašeg pisača. "

#: kprintdialog.cpp:104
msgid ""
" Printer State:  The State indicates the state of the "
"print queue on the print server (which could be your localhost). The state "
"may be 'Idle', 'Processing', 'Stopped', 'Paused' or similar. "
msgstr ""

#: kprintdialog.cpp:108
#, fuzzy
msgid ""
" Printer Comment:  The Comment may describe the selected "
"printer. This comment is created by the administrator of the print system "
"(or may be left empty). "
msgstr ""
"  Komentar može opisivati odabrani pisač. Ovaj komentar stvara "
"administrator pisačkog sustava(ili može ostati prazan). "

#: kprintdialog.cpp:112
msgid ""
" Printer Selection Menu:  
Use this combo box to select the "
"printer to which you want to print. Initially (if you run TDEPrint for the "
"first time), you may only find the   TDE special printers (which "
"save jobs to disk [as PostScript- or PDF-files], or deliver jobs via email "
"(as a PDF attachment). If you are missing a real printer, you need to... "
"
     
  • ...either create a local printer with the help of the TDE Add "
"Printer Wizard. The Wizard is available for the CUPS and RLPR printing "
"systems (click button to the left of the 'Properties' button),
    •  "
"
  • ...or try to connect to an existing remote CUPS print server. You can "
"connect by clicking the 'System Options' button below. A new dialog "
"opens: click on the 'CUPS server' icon: Fill in the information "
"required to use the remote server. 
    •   
 
Note: It may "
"happen that you successfully connected to a remote CUPS  server and still do "
"not get a printer list. If this happens: force TDEPrint to  re-load its "
"configuration files. To reload the configuration files, either start "
"kprinter again, or use the  switch the print system away from CUPS and back "
"again once. The print system switch  can be made through a selection in the "
"drop-down menu at bottom of this dialog when  fully expanded). 
  "
msgstr ""

#: kprintdialog.cpp:137
#, fuzzy
msgid ""
" Print Job Properties:  
This button opens a dialog where you "
"can make decisions regarding all supported print job options. "
msgstr ""
" Ovaj gumb vas odvodi na mjesto gdje možete donijeti odluke o svi "
"podržanim opcijama poslova tiskanja."

#: kprintdialog.cpp:141
msgid ""
" Selective View on List of Printers: 
 This button reduces the "
"list of visible printers to a shorter, more convenient, pre-defined list. 
This is particularly useful in enterprise environments with lots of "
"printers. The default is to show all printers.
 
To create a "
"personal 'selective view list', click on the 'System Options' button at the bottom of this dialog. Then, in the new dialog, select "
"'Filter' (left column in the TDE Print Configuration "
"dialog) and setup your selection..
 
Warning: Clicking this "
"button without prior creation of a personal  'selective view list' "
"will make all printers dissappear from the  view. (To re-enable all "
"printers, just click this button again.) 
  "
msgstr ""

#: kprintdialog.cpp:154
msgid ""
"TDE Add Printer Wizard 
This button starts the TDE Add "
"Printer Wizard.
 
Use the Wizard (with \"CUPS\" or "
"\"RLPR\") to add locally defined printers to your system. 
 "
"
Note: The TDE Add Printer Wizard does not work,  "
"and this button is disabled if you use  \"Generic LPD\", \"LPRng"
"\", or \"Print Through  an External Program\".) 
  "
msgstr ""

#: kprintdialog.cpp:163
msgid ""
" External Print Command 
Here you can enter any command that "
"would also print for you in  a konsole window. 
 Example: "
"
a2ps -P <printername> --medium=A3
. "
msgstr ""

#: kprintdialog.cpp:168
#, fuzzy
msgid ""
" Additional Print Job Options 
This button shows or hides "
"additional printing options."
msgstr ""
" Ovaj gumb vas odvodi na mjesto gdje možete donijeti odluke o svi "
"podržanim opcijama poslova tiskanja."

#: kprintdialog.cpp:170
msgid ""
" System Options:  
This button starts a new dialog where you "
"can adjust various settings of your printing system. Amongst them: 
  •  "
"Should \tDE applications embed all fonts into the PostScript they generate "
"for printing? 
  •  Should TDE use an external PostScript viewer like gv for print page previews? 
  •  Should TDEPrint use a local or a remote "
"CUPS server?, 
 and many more....  "
msgstr ""

#: kprintdialog.cpp:182
#, fuzzy
msgid ""
" Help: This button takes you to the complete TDEPrint Manual. "
msgstr ""
"Oajo gumb vas odvodi do cjelovitog TDEPrint uputstva."

#: kprintdialog.cpp:186
#, fuzzy
msgid ""
" Cancel: This button cancels your print job and quits the "
"kprinter dialog. "
msgstr ""
"Ovaj gumb otkazuje vaš posao tiskanja i zatvara kprinter dijalog."

#: kprintdialog.cpp:190
#, fuzzy
msgid ""
" Print: This button sends the job to the printing process. If you "
"are sending non-PostScript files, you may be asked if you want TDE to "
"convert the files into PostScript, or if you want your print subsystem (like "
"CUPS) to do this. "
msgstr ""
"Ovaj gumb šalje posao na proces tiskanja. Ako šaljete ne-PostScript "
"datoteke, možda ćete biti upitani želite li da TDE pretvori datoteke u "
"PostScript format, ili želite da to uradi vaš podsustav za tiskanje (kao što "
"je CUPS)."

#: kprintdialog.cpp:196
msgid ""
" Keep Printing Dialog Open
If you enable this checkbox, the "
"printing dialog stays open after you hit the Print button.
 
 "
"This is especially useful, if you need to test various print settings (like "
"color matching for an inkjet printer) or if you want to send your job to "
"multiple printers (one after the other) to have it finished more quickly. "
msgstr ""

#: kprintdialog.cpp:206
msgid ""
" Output File Name and Path: The \"Output file:\" shows  you where "
"your file will be saved if you decide to \"Print to File\" your job, using "
"one of the TDE Special Printers named \"Print to File "
"(PostScript)\" or \"Print to File (PDF)\". Choose a name and location that "
"suits your need by using the button and/or editing the line on the right. "
msgstr ""

#: kprintdialog.cpp:214
#, fuzzy
msgid ""
" Output File Name and Path: Edit this line to create a  path and "
"filename that suits your needs. (Button and Lineedit field are only "
"available if you \"Print to File\") "
msgstr ""
"  U ovu liniju unesite ime i put do datoteke koja vam odgovara. "
"(Dostupna samo ako koristite \"Piši u datoteku\") "

#: kprintdialog.cpp:219
msgid ""
" Browse Directories button: This button calls  the \"File Open / "
"Browsed Directories\" dialog to let you choose a directory and file name "
"where your \"Print-to-File\" job should be saved. "
msgstr ""

#: kprintdialog.cpp:225
msgid ""
" Add File to Job 
This button calls the \"File Open / Browse "
"Directories\" dialog to allow you to select a file for printing. Note, that  "
"
  • you can select ASCII or International Text, PDF, PostScript, JPEG, "
"TIFF, PNG, GIF and many other graphical formats. 
  • you can select various "
"files from different paths and send them as one \"multi-file job\" to the "
"printing system. 
 "
msgstr ""

#: kprintdialog.cpp:237
#, fuzzy
msgid ""
" Print Preview Enable this checkbox if you want to see a preview "
"of your printout. A preview lets you check if, for instance, your intended "
"\"poster\" or \"pamphlet\" layout looks like you expected, without wasting "
"paper first. It also lets you cancel the job if something looks wrong.  "
"
Note: The preview feature (and therefore this checkbox)  is only "
"visible for printjobs created from inside TDE applications.  If you start "
"kprinter from the commandline, or if you use kprinter  as a print command "
"for non-TDE applications (like Acrobat Reader,  Firefox or OpenOffice), "
"print preview is not available here.  "
msgstr ""
"  Kliknite u ovu kućicu ako želite vidjeti pregled ispisa. Pregled  vam "
"dopušta da, npr. provjerite da li vam \"poster\" ili \"pamflet\" izgleda "
"kako ste namjeravali, bez isprobavanja na papiru. Također vam omogućava da "
"sve otkažete ako nešto izgleda krivo. "

#: kprintdialog.cpp:250
msgid ""
" Set as Default Printer This button sets the current printer as "
"the user's default.  
Note: (Button is only visible if the checkbox "
"for  System Options --> General --> Miscellaneous: \"Defaults to the last printer used in the application\" is "
"disabled.) "
msgstr ""

#: kprintdialog.cpp:265 management/kmmainview.cpp:289 management/kmwend.cpp:90
#: management/smbview.cpp:43
msgid "Printer"
msgstr "Pisač"

#: kprintdialog.cpp:278 management/kmspecialprinterdlg.cpp:56
#: management/kxmlcommanddlg.cpp:114
msgid "&Name:"
msgstr "I&me:"

#: kprintdialog.cpp:280 management/kminfopage.cpp:50
msgid ""
"_: Status\n"
"State:"
msgstr "Stanje:"

#: kprintdialog.cpp:282 management/kminfopage.cpp:48
msgid "Type:"
msgstr "Vrsta:"

#: kprintdialog.cpp:284 management/kmwname.cpp:40
msgid "Location:"
msgstr "Lokacija:"

#: kprintdialog.cpp:286 management/kxmlcommanddlg.cpp:176
msgid "Comment:"
msgstr "Komentar:"

#: kprintdialog.cpp:289
msgid "P&roperties"
msgstr "&Svojstva"

#: kprintdialog.cpp:291
msgid "System Op&tions"
msgstr "&Opcije sustava"

#: kprintdialog.cpp:293
msgid "Set as &Default"
msgstr "Postavi kao uob&ičajeno"

#: kprintdialog.cpp:300
#, fuzzy
msgid "Toggle selective view on printer list"
msgstr "Ne mogu dobiti popis pisača."

#: kprintdialog.cpp:305
msgid "Add printer..."
msgstr "Dodaj pisač..."

#: kprintdialog.cpp:313
msgid "Previe&w"
msgstr "Pregle&d"

#: kprintdialog.cpp:315
msgid "O&utput file:"
msgstr "&Izlazna datoteka:"

#: kprintdialog.cpp:321
msgid "Print co&mmand:"
msgstr "&Naredba za ispis:"

#: kprintdialog.cpp:330
msgid "Show/hide advanced options"
msgstr "Prikaži/sakrij napredne opcije"

#: kprintdialog.cpp:332
msgid "&Keep this dialog open after printing"
msgstr "&Zadrži dijalog otovren nakon ispisa"

#: kprintdialog.cpp:551 kprintdialog.cpp:939
msgid "An error occurred while retrieving the printer list:"
msgstr "Došlo je do greške kod čitanja popisa pisača:"

#: kprintdialog.cpp:715
#, fuzzy
msgid "The output filename is empty."
msgstr "Ime izlazne datoteke je prazno."

#: kprintdialog.cpp:754
msgid "You don't have write permissions to this file."
msgstr "Nemate ovlasti za zapisivanje u ovu datoteku."

#: kprintdialog.cpp:760
msgid "The output directory does not exist."
msgstr "Izlazni direktorij ne postoji."

#: kprintdialog.cpp:762
msgid "You don't have write permissions in that directory."
msgstr "Nemate ovlasti za zapisivanje u taj direktorij."

#: kprintdialog.cpp:874
msgid "&Options <<"
msgstr "&Opcije <<"

#: kprintdialog.cpp:887
msgid "&Options >>"
msgstr "&Opcije >>"

#: kprintdialog.cpp:929
msgid "Initializing printing system..."
msgstr "Pokretanje ispisnog sustava..."

#: kprintdialog.cpp:965
msgid "Print to File"
msgstr "Ispis u datoteku"

#: kprinter.cpp:280
msgid "Initialization..."
msgstr "Pokretanje..."

#: kprinter.cpp:283 kprinter.cpp:909
#, c-format
msgid "Generating print data: page %1"
msgstr "Pravljenje podataka za ispis: stranica %1"

#: kprinter.cpp:429
msgid "Previewing..."
msgstr "Pregled..."

#: kprinter.cpp:690 tdeprintd.cpp:158
#, c-format
msgid ""
"
A print error occurred. Error message received from system:
%1"
msgstr ""

#: kprinterimpl.cpp:156
msgid "Cannot copy multiple files into one file."
msgstr "Ne mogu kopirati više datoteka u jednu."

#: kprinterimpl.cpp:165
msgid "Cannot save print file to %1. Check that you have write access to it."
msgstr ""
"Ne mogu snimiti ispis u datoteku %1. Provjerite imate li pravo pristupa."

#: kprinterimpl.cpp:233
#, c-format
msgid "Printing document: %1"
msgstr "Ispis dokumenta: %1"

#: kprinterimpl.cpp:251
#, c-format
msgid "Sending print data to printer: %1"
msgstr "Šaljem podatke za ispis na pisač: %1"

#: kprinterimpl.cpp:279
msgid "Unable to start child print process. "
msgstr "Nije moguće pokrenuti podređeni proces ispisa."

#: kprinterimpl.cpp:281
msgid ""
"The TDE print server (tdeprintd) could not be contacted. Check that "
"this server is running."
msgstr ""
"Ne mogu stupiti u vezu s TDE poslužiteljem ispisa (tdeprintd). "
"Provjerite je li pokrenut."

#: kprinterimpl.cpp:283
msgid ""
"_: 1 is the command that  is given to\n"
"Check the command syntax:\n"
"%1 "
msgstr ""
"Provjerite sintaksu naredbe:\n"
"%1 "

#: kprinterimpl.cpp:290
msgid "No valid file was found for printing. Operation aborted."
msgstr "Nije nađena ispravna datoteka za ispis. Postupak je prekinut."

#: kprinterimpl.cpp:325
msgid ""
"
Unable to perform the requested page selection. The filter psselect cannot be inserted in the current filter chain. See Filter tab in "
"the printer properties dialog for further information.
"
msgstr ""

#: kprinterimpl.cpp:355
msgid "
Could not load filter description for %1.
"
msgstr "
Nemoguće učitati opis filtera za %1.
"

#: kprinterimpl.cpp:371
msgid ""
"
Error while reading filter description for %1. Empty command line "
"received.
"
msgstr ""
"
Greška kod čitanja opisa filtera za %1. Primljen prazninaredbeni "
"redak.
"

#: kprinterimpl.cpp:385
msgid ""
"The MIME type %1 is not supported as input of the filter chain (this may "
"happen with non-CUPS spoolers when performing page selection on a non-"
"PostScript file). Do you want TDE to convert the file to a supported format?"
"
"
msgstr ""

#: kprinterimpl.cpp:389 kprinterimpl.cpp:509
msgid "Convert"
msgstr "Pretvori"

#: kprinterimpl.cpp:399
msgid "Select MIME Type"
msgstr "Odaberite MIME tip"

#: kprinterimpl.cpp:400
msgid "Select the target format for the conversion:"
msgstr "Odaberite ciljni oblik za pretvorbu:"

#: kprinterimpl.cpp:404 kprinterimpl.cpp:430
msgid "Operation aborted."
msgstr "Postupak je prekinut."

#: kprinterimpl.cpp:410
msgid "No appropriate filter found. Select another target format."
msgstr "Nije nađen prikladan filter. Odaberite drugi ciljni oblik."

#: kprinterimpl.cpp:423
msgid ""
"Operation failed with message:
%1
Select another target format."
msgstr ""

#: kprinterimpl.cpp:441
msgid "Filtering print data"
msgstr "Filtriranje podataka za ispis"

#: kprinterimpl.cpp:445
msgid "Error while filtering. Command was: %1."
msgstr "Greška kod filtriranja. Naredba je bila:%1."

#: kprinterimpl.cpp:487
msgid "The print file is empty and will be ignored:
%1
"
msgstr "Datoteka za ispis je prazna i zanemarit će se:
%1
"

#: kprinterimpl.cpp:497
#, fuzzy
msgid ""
"The file format  %1  is not directly supported by the current "
"print system. You now have 3 options: 
     
  •  TDE can attempt to convert "
"this file automatically to a supported format. (Select Convert) 
  •  You can try to send the file to the printer without any conversion. "
"(Select Keep) 
  •  You can cancel the printjob. (Select "
"Cancel) 
 Do you want TDE to attempt and convert this file "
"to %2?"
msgstr ""
"Oblik datoteke %1 nije direktno podržan od sadašnjeg sustava za ispis. TDE "
"može pokušati automatski pretvoriti ovu datoteku u podržani oblik. Ipak, "
"možete poslati datoteku na pisač bez prethodne pretvorbe. Želite li da TDE "
"proba pretvoriti ovu datoteku u %2?"

#: kprinterimpl.cpp:510 management/kmwname.cpp:62
msgid "Keep"
msgstr "Zadrži"

#: kprinterimpl.cpp:518
msgid ""
"No appropriate filter was found to convert the file format %1 into %2."
"
  • Go to System Options -> Commands to look through the list "
"of possible filters. Each filter executes an external program.
  •  See "
"if the required external program is available.on your system.
"
msgstr ""

#: kprinterpropertydialog.cpp:78 kprinterpropertydialog.cpp:138
msgid "Printer Configuration"
msgstr "Podešavanje pisača"

#: kprinterpropertydialog.cpp:138
msgid "No configurable options for that printer."
msgstr "Nema podesivih postavki za taj pisač."

#: kprintpreview.cpp:140
msgid "Do you want to continue printing anyway?"
msgstr "Želite li svejedno nastaviti ispis?"

#: kprintpreview.cpp:148 kprintpreview.cpp:227
msgid "Print Preview"
msgstr "Pogled prije ispisa"

#: kprintpreview.cpp:278
msgid ""
"The preview program %1 cannot be found. Check that the program is correctly "
"installed and located in a directory included in your PATH environment "
"variable."
msgstr ""
"Program za pogled prije ispisa %1 nije nađen. Provjerite da je ispravno "
"postavljen i smješten u direktorij i uključen u vašu PATH okolišnu varijablu."

#: kprintpreview.cpp:303
msgid ""
"Preview failed: neither the internal TDE PostScript viewer (KGhostView) nor "
"any other external PostScript viewer could be found."
msgstr ""
"Pogled nije uspio: nije nađen niti interni TDE PostScript preglednik "
"(KGhostView) niti neki drugi vanjski PostScript preglednik "

#: kprintpreview.cpp:307
#, c-format
msgid ""
"Preview failed: TDE could not find any application to preview files of type "
"%1."
msgstr ""

#: kprintpreview.cpp:317
#, c-format
msgid "Preview failed: unable to start program %1."
msgstr "Pregled nije uspio: Nije moguće pokrenuti program %1."

#: kprintpreview.cpp:322
msgid "Do you want to continue printing?"
msgstr "Želite li nastaviti ispis?"

#: kprintprocess.cpp:75
msgid "File transfer failed."
msgstr "Prijenos datoteka nije uspio."

#: kprintprocess.cpp:81
msgid "Abnormal process termination (%1)."
msgstr "Nepravilan svršetak procesa (%1)."

#: kprintprocess.cpp:83
msgid "%1: execution failed with message:
%2
"
msgstr "%1: izvršavanje prekinuto s porukom: 
%2
"

#: kxmlcommand.cpp:789
msgid "One of the command object's requirements is not met."
msgstr "Jedan od zahtjeva objekata naredbe nije ispunjen."

#: kxmlcommand.cpp:797 kxmlcommand.cpp:802
#, c-format
msgid "The command does not contain the required tag %1."
msgstr "Naredba ne sadrži potrebnu oznaku (tag) %1."

#: lpd/klpdprinterimpl.cpp:46 rlpr/krlprprinterimpl.cpp:53
msgid ""
"The %1 executable could not be found in your path. Check your "
"installation."
msgstr ""
"Izvršna datoteka %1 nije pronađena u vašoj putanji. Provjerite "
"instalaciju."

#: lpd/kmlpdmanager.cpp:87
msgid "Local printer queue (%1)"
msgstr "Red čekanja lokalnog pisača (%1)"

#: lpd/kmlpdmanager.cpp:87
msgid ""
"_: Unknown type of local printer queue\n"
"Unknown"
msgstr "Nepoznat"

#: lpd/kmlpdmanager.cpp:88
msgid ""
msgstr ""

#: lpd/kmlpdmanager.cpp:89
msgid ""
"_: Unknown Driver\n"
"Unknown"
msgstr "Nepoznat"

#: lpd/kmlpdmanager.cpp:95
msgid "Remote LPD queue %1@%2"
msgstr "Udaljeno LPD čekanje %1@%2"

#: lpd/kmlpdmanager.cpp:158
msgid "Unable to create spool directory %1 for printer %2."
msgstr "Nije moguće izraditi mapu prikupljanja %1 za pisač %2."

#: lpd/kmlpdmanager.cpp:165
msgid "Unable to save information for printer %1."
msgstr "Nije moguće spremiti podatke pisača %1."

#: lpd/kmlpdmanager.cpp:193
msgid ""
"Unable to set correct permissions on spool directory %1 for printer %2."
msgstr ""
"Nije moguće podesiti ispravna dopuštenja mape prikupljanja %1 za pisač "
"%2."

#: lpd/kmlpdmanager.cpp:237
msgid "Permission denied: you must be root."
msgstr "Dopuštenje je uskraćeno: morate biti korijenski korisnik."

#: lpd/kmlpdmanager.cpp:244
msgid "Unable to execute command \"%1\"."
msgstr "Nije moguće izvršiti naredbu \"%1\"."

#: lpd/kmlpdmanager.cpp:317
msgid "Unable to write printcap file."
msgstr "Nije moguće zapisati u datoteku printcap."

#: lpd/kmlpdmanager.cpp:372
msgid "Couldn't find driver %1 in printtool database."
msgstr ""
"Nije moguće pronaći upravljački program %1 u bazi podataka printtool."

#: lpd/kmlpdmanager.cpp:411
msgid "Couldn't find printer %1 in printcap file."
msgstr "Nije moguće pronaći pisač %1 u datoteci printcap."

#: lpd/kmlpdmanager.cpp:440
msgid "No driver found (raw printer)"
msgstr "Nije pronađen upravljački program (izravni pisač)"

#: lpd/kmlpdmanager.cpp:442
msgid "Printer type not recognized."
msgstr "Vrsta pisača nije prepoznata."

#: lpd/kmlpdmanager.cpp:452
msgid ""
"The driver device %1 is not compiled in your GhostScript "
"distribution. Check your installation or use another driver."
msgstr ""
"Upravljački program %1 nije ugrađen u vašu GhostScript distribuciju. "
"Provjerite vašu instalaciju ili upotrijebite drugi upravljački program."

#: lpd/kmlpdmanager.cpp:560
msgid "Unable to write driver associated files in spool directory."
msgstr ""
"Nije moguće zapisati datoteke upravljačkog programa u mapu prikupljanja."

#: lpd/kmlpduimanager.cpp:44
msgid "Local printer (parallel, serial, USB)"
msgstr "Lokalni pisač (paralelni, serijski, USB)"

#: lpd/kmlpduimanager.cpp:45 management/kmpropbackend.cpp:68
#: rlpr/kmwrlpr.cpp:116
msgid "Remote LPD queue"
msgstr "Udaljeno LPD čekanje"

#: lpd/kmlpduimanager.cpp:46
msgid "SMB shared printer (Windows)"
msgstr "SMB dijeljeni pisač (Windows)"

#: lpd/kmlpduimanager.cpp:47
msgid "Network printer (TCP)"
msgstr "Mrežni pisač (TCP)"

#: lpd/kmlpduimanager.cpp:48
msgid "File printer (print to file)"
msgstr "Datotečni pisač (ispis u datoteku)"

#: lpd/lpdtools.cpp:31
msgid "A4"
msgstr "A4"

#: lpd/lpdtools.cpp:32
msgid "A3"
msgstr "A3"

#: lpd/lpdtools.cpp:33
msgid "B4"
msgstr "B4"

#: lpd/lpdtools.cpp:34
msgid "B5"
msgstr "B5"

#: lpd/lpdtools.cpp:233
msgid "GhostScript settings"
msgstr "GhostScript postavke"

#: lpd/lpdtools.cpp:239 management/kmpropdriver.cpp:53
#: management/kmwend.cpp:104
msgid "Driver"
msgstr "Upravljački program"

#: lpd/lpdtools.cpp:254
msgid "Resolution"
msgstr "Rezolucija"

#: lpd/lpdtools.cpp:277
msgid "Color depth"
msgstr "Dubina boja"

#: lpd/lpdtools.cpp:301
msgid "Additional GS options"
msgstr "Dodatne GS opcije"

#: lpd/lpdtools.cpp:313
msgid "Page size"
msgstr "Veličina papira"

#: lpd/lpdtools.cpp:329
msgid "Pages per sheet"
msgstr "Stranica po listu"

#: lpd/lpdtools.cpp:345
msgid "Left/right margin (1/72 in)"
msgstr "Lijeva/desna margina (1/72 in)"

#: lpd/lpdtools.cpp:350
msgid "Top/bottom margin (1/72 in)"
msgstr "Gornja/donja margina (1/72 in)"

#: lpd/lpdtools.cpp:356
msgid "Text options"
msgstr "Opcije teksta"

#: lpd/lpdtools.cpp:362
msgid "Send EOF after job to eject page"
msgstr "Po završetku zadatka pošalji naredbu EOF radi izbacivanja stranice"

#: lpd/lpdtools.cpp:370
msgid "Fix stair-stepping text"
msgstr "Ispravi stepenasti tekst"

#: lpd/lpdtools.cpp:382
msgid "Fast text printing (non-PS printers only)"
msgstr "Brzi ispis teksta (samo za ne-PS pisače)"

#: lpdunix/kmlpdunixmanager.cpp:210
msgid "Description unavailable"
msgstr "Opis nije dostupan"

#: lpdunix/kmlpdunixmanager.cpp:220 lpdunix/kmlpdunixmanager.cpp:271
#: lpdunix/kmlpdunixmanager.cpp:318 lpdunix/kmlpdunixmanager.cpp:380
#, c-format
msgid "Remote printer queue on %1"
msgstr "Udaljeni red pisača na %1"

#: lpdunix/kmlpdunixmanager.cpp:222 lpdunix/kmlpdunixmanager.cpp:274
#: lpdunix/kmlpdunixmanager.cpp:320 lpdunix/kmlpdunixmanager.cpp:342
#: lpdunix/kmlpdunixmanager.cpp:382 management/kminfopage.cpp:118
msgid "Local printer"
msgstr "Lokalni pisač"

#: lpr/apshandler.cpp:68
msgid "APS Driver (%1)"
msgstr "APS upravljački program (%1)"

#: lpr/apshandler.cpp:112 lpr/lprhandler.cpp:74 lpr/lprngtoolhandler.cpp:72
msgid "Network printer (%1)"
msgstr "Mrežni pisač (%1)"

#: lpr/apshandler.cpp:215 lpr/lprhandler.cpp:127 lpr/lprngtoolhandler.cpp:276
#: lpr/matichandler.cpp:421
#, c-format
msgid "Unsupported backend: %1."
msgstr "Podloga nije podržana: %1"

#: lpr/apshandler.cpp:221
#, c-format
msgid "Unable to create directory %1."
msgstr "Nije moguće izraditi mapu %1."

#: lpr/apshandler.cpp:241
#, c-format
msgid "Missing element: %1."
msgstr "Nedostaje element: %1."

#: lpr/apshandler.cpp:258 lpr/apshandler.cpp:289 lpr/lprngtoolhandler.cpp:323
#, c-format
msgid "Invalid printer backend specification: %1"
msgstr "Neispravna specifikacija podloge pisača: %1"

#: lpr/apshandler.cpp:264 lpr/apshandler.cpp:295 lpr/apshandler.cpp:367
#, c-format
msgid "Unable to create the file %1."
msgstr "Nije moguće izraditi datoteku %1."

#: lpr/apshandler.cpp:322
msgid "The APS driver is not defined."
msgstr "APS upravljački program nije definiran."

#: lpr/apshandler.cpp:380
#, c-format
msgid "Unable to remove directory %1."
msgstr "Nije moguće ukloniti mapu %1."

#: lpr/editentrydialog.cpp:40
msgid "Aliases:"
msgstr "Aliasi:"

#: lpr/editentrydialog.cpp:46 management/kxmlcommanddlg.cpp:107
msgid "String"
msgstr "String"

#: lpr/editentrydialog.cpp:47
msgid "Number"
msgstr "Broj"

#: lpr/editentrydialog.cpp:48 management/kxmlcommanddlg.cpp:111
msgid "Boolean"
msgstr "Da/Ne"

#: lpr/editentrydialog.cpp:72
#, c-format
msgid "Printcap Entry: %1"
msgstr "Printcap unos: %1"

#: lpr/kmconfiglpr.cpp:33 lpr/kmconfiglpr.cpp:37
msgid "Spooler"
msgstr "Sakupljač"

#: lpr/kmconfiglpr.cpp:34
msgid "Spooler Settings"
msgstr "Postavke posrednika pisača"

#: lpr/kmlprjobmanager.cpp:83
msgid "Unsupported operation."
msgstr "Postupak nije podržan."

#: lpr/kmlprmanager.cpp:289
msgid "The printcap file is a remote file (NIS). It cannot be written."
msgstr ""
"Datoeka printcap je udaljena detoteka (NIS). U nju se ne može zapisivati."

#: lpr/kmlprmanager.cpp:305
msgid ""
"Unable to save printcap file. Check that you have write permissions for that "
"file."
msgstr ""
"Nije moguće spremiti datoteku printcap. Provjerite imate li pravo "
"zapisivanja za tu datoteku."

#: lpr/kmlprmanager.cpp:330
msgid "Internal error: no handler defined."
msgstr "Interna pogreška: Rukovanje nije deifnirano."

#: lpr/kmlprmanager.cpp:344
msgid "Couldn't determine spool directory. See options dialog."
msgstr ""
"Nije moguće utvrditi lokaciju mape prikupljanja. Pogledajte dijalog opcija."

#: lpr/kmlprmanager.cpp:350
msgid ""
"Unable to create the spool directory %1. Check that you have the required "
"permissions for that operation."
msgstr ""
"Nije moguće izraditi mapu prikupljanja %1. Provjerite imate li dopuštenja za "
"taj postupak."

#: lpr/kmlprmanager.cpp:382
#, c-format
msgid ""
"The printer has been created but the print daemon could not be restarted. %1"
msgstr ""
"Pisač je izrađen, ali demon ispisivanja nije moguće ponovo pokrenuti. %1"

#: lpr/kmlprmanager.cpp:410
msgid ""
"Unable to remove spool directory %1. Check that you have write permissions "
"for that directory."
msgstr ""
"Nije moguće ukloniti mapu prikupljanja %1. Provjerite imate li dopuštenja "
"zapisivanja u tu mapu."

#: lpr/kmlprmanager.cpp:458
msgid "&Edit printcap Entry..."
msgstr "&Uredi printcap zapis..."

#: lpr/kmlprmanager.cpp:473
msgid ""
"Editing a printcap entry manually should only be done by confirmed system "
"administrator. This may prevent your printer from working. Do you want to "
"continue?"
msgstr ""
"Ručno uređivanje printcap unosa treba raditi samo ako je potvrđeno od strane "
"administratora sustava. Izmjene mogu onemogućiti rad sa pisačem. Zaista "
"želite nastaviti?"

#: lpr/kmlprmanager.cpp:489
#, c-format
msgid "Spooler type: %1"
msgstr "Vrsta posrednika: %1"

#: lpr/lpchelper.cpp:235 lpr/lpchelper.cpp:273 lpr/lpchelper.cpp:291
#: lpr/lpchelper.cpp:314
msgid "The executable %1 couldn't be found in your PATH."
msgstr "Izvršna datoteka %1 nije nađena u vašoj putanji."

#: lpr/lpchelper.cpp:256 lpr/lpchelper.cpp:280 lpr/lpchelper.cpp:298
msgid "Permission denied."
msgstr "Zahtjev je odbijen."

#: lpr/lpchelper.cpp:259
msgid "Printer %1 does not exist."
msgstr "Pisač %1 ne postoji."

#: lpr/lpchelper.cpp:263
#, c-format
msgid "Unknown error: %1"
msgstr "Nepoznata greška: %1"

#: lpr/lpchelper.cpp:282
#, c-format
msgid "Execution of lprm failed: %1"
msgstr "Izvršenje lprm nije uspjelo: %1"

#: lpr/lprhandler.cpp:59 lpr/lprhandler.cpp:97
msgid "Unknown (unrecognized entry)"
msgstr "Nepoznato (unos nije prepoznat)"

#: lpr/lprhandler.cpp:67 lpr/lprhandler.cpp:91
msgid "Remote queue (%1) on %2"
msgstr "Udaljeno čekanje (%1) pri %2"

#: lpr/lprhandler.cpp:81 lpr/matichandler.cpp:86
#, c-format
msgid "Local printer on %1"
msgstr "Lokalni pisač na %1"

#: lpr/lprhandler.cpp:104 lpr/lprhandler.cpp:110 lpr/lprhandler.cpp:116
msgid "Unrecognized entry."
msgstr "Unos nije prepoznat."

#: lpr/lprngtoolhandler.cpp:99
msgid "IFHP Driver (%1)"
msgstr "IFHP upravljač (%1)"

#: lpr/lprngtoolhandler.cpp:99 lpr/lprngtoolhandler.cpp:170
msgid "unknown"
msgstr "nepoznato"

#: lpr/lprngtoolhandler.cpp:162
msgid "No driver defined for that printer. It might be a raw printer."
msgstr "Upravljač za pisača nije definiran. Možda je to raw pisač."

#: lpr/lprngtoolhandler.cpp:170
msgid "LPRngTool Common Driver (%1)"
msgstr "LPRngTool obični upravljač (%1)"

#: lpr/matichandler.cpp:82
msgid "Network printer"
msgstr "Mrežni pisač"

#: lpr/matichandler.cpp:245
msgid "Internal error."
msgstr "Interna greška."

#: lpr/matichandler.cpp:339
msgid ""
"You probably don't have the required permissions to perform that operation."
msgstr "Vjerojatno nemate ovlasti za taj postupak."

#: lpr/matichandler.cpp:426
msgid ""
"Unable to find executable lpdomatic. Check that Foomatic is correctly "
"installed and that lpdomatic is installed in a standard location."
msgstr ""
"Nije moguće pronaći izvršnu datoteku \"lpdomatik\". Provjerite je li "
"Foomatic ispravno instaliran i je li \"lpdomatik\" instaliran u standardnu "
"lokaciju."

#: lpr/matichandler.cpp:457
#, c-format
msgid "Unable to remove driver file %1."
msgstr "Nije moguće ukloniti datoteku upravljačkog programa %1."

#: management/kaddprinterwizard.cpp:10
msgid "Configure TDE Print"
msgstr "Podešavanje TDE ispisa"

#: management/kaddprinterwizard.cpp:11
msgid "Configure print server"
msgstr "Podešavanje poslužitelja ispisa"

#: management/kaddprinterwizard.cpp:18
msgid "Start the add printer wizard"
msgstr "Pokreni čarobnjak za dodavanje pisača"

#: management/kmconfigcommand.cpp:33
msgid "Commands"
msgstr "Naredbe"

#: management/kmconfigcommand.cpp:34
msgid "Command Settings"
msgstr "Postavke naredbi"

#: management/kmconfigcommand.cpp:37
msgid "Edit/Create Commands"
msgstr "Izmjena/izrada naredbi"

#: management/kmconfigcommand.cpp:39
msgid ""
"
Command objects perform a conversion from input to output.
They are "
"used as the basis to build both print filters and special printers. They are "
"described by a command string, a set of options, a set of requirements and "
"associated mime types. Here you can create new command objects and edit "
"existing ones. All changes will only be effective for you."
msgstr ""

#: management/kmconfigdialog.cpp:38
msgid "TDE Print Configuration"
msgstr "TDE postavke ispisa"

#: management/kmconfigfilter.cpp:40
msgid "Filter"
msgstr "Filter"

#: management/kmconfigfilter.cpp:41
msgid "Printer Filtering Settings"
msgstr "Postavke filtera za pisač"

#: management/kmconfigfilter.cpp:44
msgid "Printer Filter"
msgstr "Filter pisača"

#: management/kmconfigfilter.cpp:56
msgid ""
"The printer filtering allows you to view only a specific set of printers "
"instead of all of them. This may be useful when there are a lot of printers "
"available but you only use a few ones. Select the printers you want to see "
"from the list on the left or enter a Location filter (ex: Group_1*). "
"Both are cumulative and ignored if empty."
msgstr ""
"Filter pisača omogućava prikazivanje samo jedan dio pisača umjesto svih "
"odjednom. Ovo može biti vrlo korisno ako postoji mnogo pisača, a vi "
"koristite samo nekolicinu. Odaberite pisače koje želite vidjeti sa popisa "
"lijevo ili unesite Lokaciju filtera (npr:Grupa_1*). Obje su "
"kumulativne i zanemaruju se ako su prazne."

#: management/kmconfigfilter.cpp:62
msgid "Location filter:"
msgstr "Lokacija filtra:"

#: management/kmconfigfonts.cpp:43
msgid "Font Settings"
msgstr "Postavke pisma"

#: management/kmconfigfonts.cpp:46
msgid "Fonts Embedding"
msgstr "Ugrađivanje u pisama"

#: management/kmconfigfonts.cpp:47
msgid "Fonts Path"
msgstr "Putanja pisama"

#: management/kmconfigfonts.cpp:49
msgid "&Embed fonts in PostScript data when printing"
msgstr "&Ugradi pisma u PostScript podatke kod ispisa"

#: management/kmconfigfonts.cpp:57
msgid "&Up"
msgstr "&Gore"

#: management/kmconfigfonts.cpp:58
msgid "&Down"
msgstr "&Dolje"

#: management/kmconfigfonts.cpp:59
msgid "&Add"
msgstr "&Dodaj"

#: management/kmconfigfonts.cpp:61
msgid "Additional director&y:"
msgstr "&Dodatni direktorij:"

#: management/kmconfigfonts.cpp:85
msgid ""
"These options will automatically put fonts in the PostScript file which are "
"not present on the printer. Font embedding usually produces better print "
"results (closer to what you see on the screen), but larger print data as "
"well."
msgstr ""
"Ove postavke će automatski staviti pisma u PostScript datoteku koje nisu na "
"pisaču. Ugrađivanje pisama Obično daje bolji ispis (bliže onome što vidite "
"na zaslonu), ali također i povećava količinu podataka za ispis."

#: management/kmconfigfonts.cpp:89
msgid ""
"When using font embedding you can select additional directories where TDE "
"should search for embeddable font files. By default, the X server font path "
"is used, so adding those directories is not needed. The default search path "
"should be sufficient in most cases."
msgstr ""
"Kada koristite ugrađivanje pisama, odna možete odabrati dodatne direktorije "
"gdje će TDE tražiti datoteke pisma. Obično se koristi putanja X poslužitelja "
"pisama, pa dodavanje drugih nije nužno. Uobičajena putanja za traženje će "
"biti dovoljna u većini slučajeva."

#: management/kmconfiggeneral.cpp:45 management/kmpropgeneral.cpp:55
msgid "General Settings"
msgstr "Opće postavke"

#: management/kmconfiggeneral.cpp:48
msgid "Refresh Interval"
msgstr "Vrijeme osvježavanja"

#: management/kmconfiggeneral.cpp:51
msgid " sec"
msgstr " sek"

#: management/kmconfiggeneral.cpp:53
msgid ""
"This time setting controls the refresh rate of various TDE Print "
"components like the print manager and the job viewer."
msgstr ""
"Ovim vremenom kontrolirate obnavljanje raznih TDEispis komponenti kao "
"što su voditelj ispisa i pregled poslova."

#: management/kmconfiggeneral.cpp:57
msgid "Test Page"
msgstr "Probna stranica"

#: management/kmconfiggeneral.cpp:58
msgid "&Specify personal test page"
msgstr "&Navedite osobnu probnu stranicu:"

#: management/kmconfiggeneral.cpp:60
msgid "Preview..."
msgstr "Pregled..."

#: management/kmconfiggeneral.cpp:70
msgid "Sho&w printing status message box"
msgstr "Po&kaži kućicu sa stanjem pisača"

#: management/kmconfiggeneral.cpp:71
msgid "De&faults to the last printer used in the application"
msgstr "V&raća se na zadnjeg pisača koji je korišten u programu"

#: management/kmconfiggeneral.cpp:127
msgid ""
"The selected test page is not a PostScript file. You may not be able to test "
"your printer anymore."
msgstr "Odabrana probna stranica"

#: management/kmconfiggeneral.cpp:137 management/kmwfile.cpp:60
msgid "Empty file name."
msgstr "Prazno ime datoteke."

#: management/kmconfigjobs.cpp:33 management/kmpages.cpp:59
msgid "Jobs"
msgstr "Poslovi"

#: management/kmconfigjobs.cpp:34 management/kmjobviewer.cpp:699
msgid "Print Job Settings"
msgstr "Postavke poslova ispisa"

#: management/kmconfigjobs.cpp:37
msgid "Jobs Shown"
msgstr "Prikazani poslovi"

#: management/kmconfigjobs.cpp:41 management/kmjobviewer.cpp:170
#: management/kmjobviewer.cpp:336
msgid "Unlimited"
msgstr "Neograničeno"

#: management/kmconfigjobs.cpp:42
msgid "Maximum number of jobs shown:"
msgstr "Maksimalni broj prikazanih poslova:"

#: management/kmconfigpreview.cpp:35
msgid "Preview"
msgstr "Pregled"

#: management/kmconfigpreview.cpp:36
msgid "Preview Settings"
msgstr "Postavke pregleda"

#: management/kmconfigpreview.cpp:39
msgid "Preview Program"
msgstr "Program za pregled"

#: management/kmconfigpreview.cpp:41
msgid "&Use external preview program"
msgstr "&Koristi vanjski program za pregled:"

#: management/kmconfigpreview.cpp:44
msgid ""
"You can use an external preview program (PS viewer) instead of the TDE built-"
"in preview system. Note that if the TDE default PS viewer (KGhostView) "
"cannot be found, TDE tries automatically to find another external PostScript "
"viewer"
msgstr ""

#: management/kmdbcreator.cpp:92
msgid ""
"No executable defined for the creation of the driver database. This "
"operation is not implemented."
msgstr ""
"Nije određen izvršitelj stvaranja baze podataka upravljača. Ovaj postupak "
"nije podržan."

#: management/kmdbcreator.cpp:95
msgid ""
"The executable %1 could not be found in your PATH. Check that this program "
"exists and is accessible in your PATH variable."
msgstr ""
"Izvršitelja %1 nije moguće naći u vašoj putanji (PATH). Provjerite postoji "
"li taj program i jeli dostupa u vašoj putanji."

#: management/kmdbcreator.cpp:99
msgid ""
"Unable to start the creation of the driver database. The execution of %1 "
"failed."
msgstr ""
"Nije moguće pokrenuti izradu baze podataka upravljačkih programa. "
"Izvršavanje %1 nije uspjelo."

#: management/kmdbcreator.cpp:113
msgid "Please wait while TDE rebuilds a driver database."
msgstr "Molim pričekajte dok TDE izgradi bazu upravljačkih programa."

#: management/kmdbcreator.cpp:114
msgid "Driver Database"
msgstr "Baza podataka o upravljačkim programima"

#: management/kmdbcreator.cpp:171
msgid ""
"Error while creating driver database: abnormal child-process termination."
msgstr ""
"Greška pri stvaranju baze podataka upravljača: nevaljan prekid procesa "
"potomka!"

#: management/kmdriverdbwidget.cpp:51
msgid "&PostScript printer"
msgstr "&PostScript pisač"

#: management/kmdriverdbwidget.cpp:52
msgid "&Raw printer (no driver needed)"
msgstr "&Obični pisač (upravljački program nije potreban)"

#: management/kmdriverdbwidget.cpp:55
msgid "&Other..."
msgstr "&Ostalo..."

#: management/kmdriverdbwidget.cpp:56
msgid "&Manufacturer:"
msgstr "P&roizvođač:"

#: management/kmdriverdbwidget.cpp:57
msgid "Mo&del:"
msgstr "&Model:"

#: management/kmdriverdbwidget.cpp:157 management/kmdriverdbwidget.cpp:166
msgid "Loading..."
msgstr "Učitavam..."

#: management/kmdriverdbwidget.cpp:217
msgid "Unable to find the PostScript driver."
msgstr "Nije moguće pronaći PostScript upravljački program."

#: management/kmdriverdbwidget.cpp:230
msgid "Select Driver"
msgstr "Odaberi upravljački program"

#: management/kmdriverdbwidget.cpp:247 management/kmdriverdbwidget.cpp:249
msgid ""
msgstr ""

#: management/kmdriverdbwidget.cpp:252
msgid "Database"
msgstr "Baza podataka"

#: management/kmdriverdbwidget.cpp:259
msgid "Wrong driver format."
msgstr "Pogrešan format upravljačkog programa."

#: management/kmdriverdbwidget.cpp:268
msgid "Other"
msgstr "Ostalo"

#: management/kmdriverdialog.cpp:48
msgid ""
"Some options are in conflict. You must resolve those conflicts before "
"continuing."
msgstr ""
"Neke od postavki su proturječne. Morate riješiti te sukobe prije nastavka. "

#: management/kminfopage.cpp:44 management/kmpropgeneral.cpp:38
#, fuzzy
msgid ""
"_: Physical Location\n"
"Location:"
msgstr ""
"_: Physical Location\n"
"Lokacija:"

#: management/kminfopage.cpp:46 management/kmpropgeneral.cpp:39
#: management/kmwname.cpp:41
msgid "Description:"
msgstr "Opis:"

#: management/kminfopage.cpp:54 management/kminfopage.cpp:93
#: tools/escputil/escpwidget.cpp:101
msgid "Device:"
msgstr "Uređaj:"

#: management/kminfopage.cpp:56
msgid "Model:"
msgstr "Model:"

#: management/kminfopage.cpp:92
msgid "Members:"
msgstr "Članovi:"

#: management/kminfopage.cpp:112
msgid "Implicit class"
msgstr "Obvezna klasa"

#: management/kminfopage.cpp:114
msgid "Remote class"
msgstr "Udaljena klasa"

#: management/kminfopage.cpp:115
msgid "Local class"
msgstr "Lokalna klasa"

#: management/kminfopage.cpp:117
msgid "Remote printer"
msgstr "Udaljeni pisač"

#: management/kminfopage.cpp:120
msgid "Special (pseudo) printer"
msgstr "Posebni (pseudo) pisač"

#: management/kminfopage.cpp:121
msgid ""
"_: Unknown class of printer\n"
"Unknown"
msgstr "Nepoznat"

#: management/kminstancepage.cpp:61
msgid ""
"Define/Edit here instances for the current selected printer. An instance is "
"a combination of a real (physical) printer and a set of predefined options. "
"For a single InkJet printer, you could define different print formats like "
"DraftQuality, PhotoQuality or TwoSided. Those instances "
"appear as normal printers in the print dialog and allow you to quickly "
"select the print format you want."
msgstr ""

#: management/kminstancepage.cpp:87
msgid "New..."
msgstr "Novo..."

#: management/kminstancepage.cpp:88
msgid "Copy..."
msgstr "Kopiraj..."

#: management/kminstancepage.cpp:92
#, fuzzy
msgid "Settings"
msgstr "Postavke..."

#: management/kminstancepage.cpp:94
msgid "Test..."
msgstr "Proba..."

#: management/kminstancepage.cpp:113 management/kminstancepage.cpp:126
#: management/kminstancepage.cpp:138 management/kminstancepage.cpp:145
#: management/kminstancepage.cpp:161 management/kminstancepage.cpp:164
#: management/kminstancepage.cpp:183 management/kminstancepage.cpp:190
#: management/kminstancepage.cpp:192 management/kminstancepage.cpp:210
#: management/kminstancepage.cpp:244 management/kminstancepage.cpp:260
msgid "(Default)"
msgstr "(Uobičajeno)"

#: management/kminstancepage.cpp:137 management/kminstancepage.cpp:182
msgid "Instance Name"
msgstr "Naziv inastance"

#: management/kminstancepage.cpp:137 management/kminstancepage.cpp:182
msgid "Enter name for new instance (leave untouched for default):"
msgstr "Unesite ime instance (ne dirajte za uobičajene postavke):"

#: management/kminstancepage.cpp:142 management/kminstancepage.cpp:187
msgid "Instance name must not contain any spaces or slashes."
msgstr "Naziv instance ne može sadržati razmake ili kose crte."

#: management/kminstancepage.cpp:161
msgid "Do you really want to remove instance %1?"
msgstr "Želite li doista obrisati instancu %1 ?"

#: management/kminstancepage.cpp:161
msgid ""
"You can't remove the default instance. However all settings of %1 will be "
"discarded. Continue?"
msgstr ""
"Ne možete ukloniti uobičajenu instancu. Ipak, sva  podešavanja u vezi %1 će "
"biti ukolnjena. Nastaviti?"

#: management/kminstancepage.cpp:213
#, c-format
msgid "Unable to find instance %1."
msgstr "Nije moguće pronaći instancu %1."

#: management/kminstancepage.cpp:215
#, c-format
msgid ""
"Unable to retrieve printer information. Message from printing system: %1."
msgstr ""
"Nije moguće dohvatiti podatke o pisaču. Primljena poruka iz sustava ispisa: "
"%1."

#: management/kminstancepage.cpp:232
msgid "The instance name is empty. Please select an instance."
msgstr "Ime instance je prazno. Molimo odaberite instancu."

#: management/kminstancepage.cpp:264
msgid "Internal error: printer not found."
msgstr "Interna greška: pisač nije nađen."

#: management/kminstancepage.cpp:265 management/kmmainview.cpp:629
msgid "You are about to print a test page on %1. Do you want to continue?"
msgstr "Spremate se ispisati probnu stranicu na %1. Želite li nastaviti?"

#: management/kminstancepage.cpp:265 management/kmmainview.cpp:629
msgid "Print Test Page"
msgstr "Ispis probne stranice"

#: management/kminstancepage.cpp:268
#, c-format
msgid "Unable to send test page to %1."
msgstr "Nije moguće poslati probnu stranicu na %1."

#: management/kminstancepage.cpp:270 management/kmmainview.cpp:632
#, c-format
msgid "Test page successfully sent to printer %1."
msgstr "Pokusna stranica je uspješno poslana na pisač %1."

#: management/kmjobviewer.cpp:101 management/kmjobviewer.cpp:158
msgid "No Printer"
msgstr "Nema pisača"

#: management/kmjobviewer.cpp:138 management/kmjobviewer.cpp:177
#: management/kmjobviewer.cpp:194 management/kmjobviewer.cpp:210
#: management/kmjobviewer.cpp:356 management/kmjobviewer.cpp:543
msgid "All Printers"
msgstr "Svi pisači"

#: management/kmjobviewer.cpp:151
#, c-format
msgid "Print Jobs for %1"
msgstr "Poslovi ispisa za %1"

#: management/kmjobviewer.cpp:170 management/kmjobviewer.cpp:172
#: management/kmjobviewer.cpp:336
#, c-format
msgid "Max.: %1"
msgstr "Max.: %1"

#: management/kmjobviewer.cpp:235
msgid "Job ID"
msgstr "ID posla"

#: management/kmjobviewer.cpp:236
msgid "Owner"
msgstr "Vlasnik"

#: management/kmjobviewer.cpp:238
msgid ""
"_: Status\n"
"State"
msgstr "Stanje"

#: management/kmjobviewer.cpp:239
msgid "Size (KB)"
msgstr "Veličina (KB)"

#: management/kmjobviewer.cpp:240
msgid "Page(s)"
msgstr "Stranica(e)"

#: management/kmjobviewer.cpp:262
msgid "&Hold"
msgstr "&Drži"

#: management/kmjobviewer.cpp:263
msgid "&Resume"
msgstr "&Nastavi"

#: management/kmjobviewer.cpp:264
#, fuzzy
msgid "Remo&ve"
msgstr "&Ukloni"

#: management/kmjobviewer.cpp:265
msgid "Res&tart"
msgstr "&Ponovno"

#: management/kmjobviewer.cpp:266
#, fuzzy
msgid "&Move to Printer"
msgstr "Pre&mjesti na pisač..."

#: management/kmjobviewer.cpp:272
msgid "&Toggle Completed Jobs"
msgstr "&Prebaci završene poslove"

#: management/kmjobviewer.cpp:275
msgid "Show Only User Jobs"
msgstr "Pokaži samo poslove korisnika"

#: management/kmjobviewer.cpp:276
#, fuzzy
msgid "Hide Only User Jobs"
msgstr "Pokaži samo poslove korisnika"

#: management/kmjobviewer.cpp:284
msgid "User Name"
msgstr "Ime korisnika"

#: management/kmjobviewer.cpp:301
msgid "&Select Printer"
msgstr "&Odaberi pisač"

#: management/kmjobviewer.cpp:330
msgid "Refresh"
msgstr "Osvježi"

#: management/kmjobviewer.cpp:334
msgid "Keep window permanent"
msgstr "Zadrži prozor stalno"

#: management/kmjobviewer.cpp:479
msgid ""
"Unable to perform action \"%1\" on selected jobs. Error received from "
"manager:"
msgstr ""
"Nije moguće izvršiti zadatak \"%1\" na odabranim zadacima. Primljena "
"pogreška od upravitelja:"

#: management/kmjobviewer.cpp:491
msgid "Hold"
msgstr "Drži"

#: management/kmjobviewer.cpp:496
msgid "Resume"
msgstr "Nastavi"

#: management/kmjobviewer.cpp:506
msgid "Restart"
msgstr "Ponovno"

#: management/kmjobviewer.cpp:514
#, c-format
msgid "Move to %1"
msgstr "Premjesti na %1"

#: management/kmjobviewer.cpp:674
msgid "Operation failed."
msgstr "Postupak nije uspio."

#: management/kmlistview.cpp:125
msgid "Print System"
msgstr "Sustav ispisa"

#: management/kmlistview.cpp:128
msgid "Classes"
msgstr "Klase"

#: management/kmlistview.cpp:131
msgid "Printers"
msgstr "Pisači"

#: management/kmlistview.cpp:134
msgid "Specials"
msgstr "Posebno"

#: management/kmmainview.cpp:72
msgid ""
"The printer %1 already exists. Continuing will overwrite existing printer. "
"Do you want to continue?"
msgstr ""
"Pisač %1 već postoji. Nastavak će prepisati sadašnji pisač. Želite li "
"nastaviti?"

#: management/kmmainview.cpp:133 management/kmmainview.cpp:783
#: management/kmmainview.cpp:859 management/kmmainview.cpp:883
msgid "Initializing manager..."
msgstr "Pokretanje upravitelja..."

#: management/kmmainview.cpp:180
msgid "&Icons,&List,&Tree"
msgstr "&Ikone,&Popis,&Stablo"

#: management/kmmainview.cpp:184
msgid "Start/Stop Printer"
msgstr "Pokreni/zaustavi pisač"

#: management/kmmainview.cpp:186
msgid "&Start Printer"
msgstr "&Pokreni pisač"

#: management/kmmainview.cpp:187
msgid "Sto&p Printer"
msgstr "&Zaustavi pisač"

#: management/kmmainview.cpp:189
msgid "Enable/Disable Job Spooling"
msgstr "Omogući/onemogući spremanje poslova"

#: management/kmmainview.cpp:191
msgid "&Enable Job Spooling"
msgstr "&Omogući spremanje poslova"

#: management/kmmainview.cpp:192
msgid "&Disable Job Spooling"
msgstr "O&nemogući spremanje poslova"

#: management/kmmainview.cpp:195
msgid "&Configure..."
msgstr "&Postava..."

#: management/kmmainview.cpp:196
msgid "Add &Printer/Class..."
msgstr "Dodaj &pisač/klasu..."

#: management/kmmainview.cpp:197
msgid "Add &Special (pseudo) Printer..."
msgstr "Dodaj po&sebni (pseudo) pisač..."

#: management/kmmainview.cpp:198
msgid "Set as &Local Default"
msgstr "Podesi kao uobičajeno &lokalno"

#: management/kmmainview.cpp:199
msgid "Set as &User Default"
msgstr "Podesi kao &uobičajeno za korisnika"

#: management/kmmainview.cpp:200
msgid "&Test Printer..."
msgstr "&Proba pisača..."

#: management/kmmainview.cpp:201
msgid "Configure &Manager..."
msgstr "Po&dešavanje upravitelja..."

#: management/kmmainview.cpp:202
msgid "Initialize Manager/&View"
msgstr "Pokreni Upravitelj/&Pogled"

#: management/kmmainview.cpp:204
msgid "&Orientation"
msgstr "&Usmjerenje"

#: management/kmmainview.cpp:207
msgid "&Vertical,&Horizontal"
msgstr "Uspra&vno, V&odoravno"

#: management/kmmainview.cpp:211
msgid "R&estart Server"
msgstr "Ponovno pok&reni poslužitelj"

#: management/kmmainview.cpp:212
msgid "Configure &Server..."
msgstr "Podešavanje po&služitelja..."

#: management/kmmainview.cpp:213
#, fuzzy
msgid "Configure Server Access..."
msgstr "Podešavanje po&služitelja..."

#: management/kmmainview.cpp:216
#, fuzzy
msgid "Hide &Toolbar"
msgstr "Prikaz &trake s alatima"

#: management/kmmainview.cpp:218
#, fuzzy
msgid "Show Me&nu Toolbar"
msgstr "Prikaz &trake s alatima"

#: management/kmmainview.cpp:219
#, fuzzy
msgid "Hide Me&nu Toolbar"
msgstr "Prikaz &trake s alatima"

#: management/kmmainview.cpp:221
#, fuzzy
msgid "Show Pr&inter Details"
msgstr "Prikaži/sakrij detalje p&isača"

#: management/kmmainview.cpp:222
#, fuzzy
msgid "Hide Pr&inter Details"
msgstr "Prikaži/sakrij detalje p&isača"

#: management/kmmainview.cpp:226
msgid "Toggle Printer &Filtering"
msgstr "Prebaci &filtriranje pisača"

#: management/kmmainview.cpp:230
msgid "Pri&nter Tools"
msgstr "Ala&ti pisača"

#: management/kmmainview.cpp:295
msgid "Print Server"
msgstr "Poslužitelj pisača"

#: management/kmmainview.cpp:301
msgid "Print Manager"
msgstr "Voditelj ispisa"

#: management/kmmainview.cpp:334
msgid "An error occurred while retrieving the printer list."
msgstr "Dogodila se greška kod čitanja popisa pisača."

#: management/kmmainview.cpp:511
#, c-format
msgid "Unable to modify the state of printer %1."
msgstr "Nije moguće izmijeniti stanje pisača %1."

#: management/kmmainview.cpp:522
msgid "Do you really want to remove %1?"
msgstr "Zaista želite li ukloniti '%1' ?"

#: management/kmmainview.cpp:526
#, c-format
msgid "Unable to remove special printer %1."
msgstr "Nije moguće ukloniti poseban pisač %1."

#: management/kmmainview.cpp:529
#, c-format
msgid "Unable to remove printer %1."
msgstr "Nije moguće ukloniti pisač %1."

#: management/kmmainview.cpp:559
#, c-format
msgid "Configure %1"
msgstr "Podesi %1"

#: management/kmmainview.cpp:566
#, c-format
msgid "Unable to modify settings of printer %1."
msgstr "Nije moguće izmijeniti postavke pisača %1."

#: management/kmmainview.cpp:570
#, c-format
msgid "Unable to load a valid driver for printer %1."
msgstr "Nije moguće učitati valjani upravljački program za pisač %1."

#: management/kmmainview.cpp:582
msgid "Unable to create printer."
msgstr "Nije moguće izraditi pisač."

#: management/kmmainview.cpp:594
msgid "Unable to define printer %1 as default."
msgstr "Pisač %1 nije moguće postaviti kao zadani pisač."

#: management/kmmainview.cpp:634
#, c-format
msgid "Unable to test printer %1."
msgstr "Nije moguće provjerit pisač %1."

#: management/kmmainview.cpp:647
msgid "Error message received from manager:
%1
"
msgstr "Primljena greška od upravitelja: 
%1
"

#: management/kmmainview.cpp:649
msgid "Internal error (no error message)."
msgstr "Interna greška: (nema poruke o grešci)."

#: management/kmmainview.cpp:667
msgid "Unable to restart print server."
msgstr "Nije moguće ponovo pokrenuti poslužitelj pisača."

#: management/kmmainview.cpp:672
msgid "Restarting server..."
msgstr "Ponovno pokrenćem poslužitelj..."

#: management/kmmainview.cpp:682
msgid "Unable to configure print server."
msgstr "Nije moguće konfigurirati poslužitelj pisača."

#: management/kmmainview.cpp:687
msgid "Configuring server..."
msgstr "Podešavam poslužitelj..."

#: management/kmmainview.cpp:842
msgid ""
"Unable to start printer tool. Possible reasons are: no printer selected, the "
"selected printer doesn't have any local device defined (printer port), or "
"the tool library could not be found."
msgstr ""
"Nije moguće pokrenuti alat pisača. Mogući razlozi su: nije odabran pisač, "
"odabrani pisač nema definiran lokalni uređaj (port pisača) ili nije moguće "
"pronaći biblioteku s alatima."

#: management/kmmainview.cpp:866
msgid "Unable to retrieve the printer list."
msgstr "Nije moguće dohvatiti popis pisača."

#: management/kmpages.cpp:69
msgid "Instances"
msgstr "Instance"

#: management/kmpropbackend.cpp:34
msgid "Printer type:"
msgstr "Vrsta pisača:"

#: management/kmpropbackend.cpp:48
msgid "Interface"
msgstr "Sučelje"

#: management/kmpropbackend.cpp:49
msgid "Interface Settings"
msgstr "Postavke sučelja"

#: management/kmpropbackend.cpp:62
msgid "IPP Printer"
msgstr "IPP Pisač"

#: management/kmpropbackend.cpp:63
msgid "Local USB Printer"
msgstr "Lokalni USB pisač"

#: management/kmpropbackend.cpp:64
msgid "Local Parallel Printer"
msgstr "Lokalni paralelni pisač"

#: management/kmpropbackend.cpp:65
msgid "Local Serial Printer"
msgstr "Lokalni serijski pisač"

#: management/kmpropbackend.cpp:66
msgid "Network Printer (socket)"
msgstr "Mrežni pisač (socket)"

#: management/kmpropbackend.cpp:67
msgid "SMB printers (Windows)"
msgstr "SMB (windows) pisač"

#: management/kmpropbackend.cpp:69
msgid "File printer"
msgstr "Pisač u datoteku"

#: management/kmpropbackend.cpp:70
msgid "Serial Fax/Modem printer"
msgstr "Serijski Fax/Modem pisač"

#: management/kmpropbackend.cpp:71
msgid ""
"_: Unknown Protocol\n"
"Unknown"
msgstr "Nepoznat"

#: management/kmpropcontainer.cpp:35
msgid "Change..."
msgstr "Promijeni..."

#: management/kmpropdriver.cpp:36
msgid "Manufacturer:"
msgstr "Proizvođač:"

#: management/kmpropdriver.cpp:37
msgid "Printer model:"
msgstr "Model pisača:"

#: management/kmpropdriver.cpp:38
msgid "Driver info:"
msgstr "Podaci o goniču:"

#: management/kmpropgeneral.cpp:37
msgid "Printer name:"
msgstr "Ime pisača:"

#: management/kmpropmembers.cpp:39 management/kmwend.cpp:59
msgid "Members"
msgstr "Članovi"

#: management/kmpropmembers.cpp:40
msgid "Class Members"
msgstr "Članovi klase"

#: management/kmpropwidget.cpp:50
msgid ""
"Unable to change printer properties. Error received from manager:
%1"
msgstr ""

#: management/kmspecialprinterdlg.cpp:46
msgid "Add Special Printer"
msgstr "Dodaj posebni pisač"

#: management/kmspecialprinterdlg.cpp:57 management/kxmlcommanddlg.cpp:115
#: management/kxmlcommanddlg.cpp:866
msgid "&Description:"
msgstr "&Opis:"

#: management/kmspecialprinterdlg.cpp:58
msgid "&Location:"
msgstr "&Lokacija:"

#: management/kmspecialprinterdlg.cpp:66
msgid "Command &Settings"
msgstr "Po&stavke naredbi"

#: management/kmspecialprinterdlg.cpp:69
msgid "Outp&ut File"
msgstr "Izlazna datoteka"

#: management/kmspecialprinterdlg.cpp:71
msgid "&Enable output file"
msgstr "&Omogući izlaznu datoteku"

#: management/kmspecialprinterdlg.cpp:83 management/kxmlcommanddlg.cpp:116
msgid "&Format:"
msgstr "&Format:"

#: management/kmspecialprinterdlg.cpp:88
#, fuzzy
msgid "Filename e&xtension:"
msgstr "n&astavak imena datoteke:"

#: management/kmspecialprinterdlg.cpp:105
msgid ""
"
The command will use an output file. If checked, make sure the command "
"contains an output tag.
"
msgstr ""
"
Naredba će koristiti izlaznu datoteku. Ako tako odaberete, budite sigurni "
"da naredba sadrži tag za izlaz.
"

#: management/kmspecialprinterdlg.cpp:108
#, c-format
msgid ""
"
The command to execute when printing on this special printer. Either "
"enter the command to execute directly, or associate/create a command object "
"with/for this special printer. The command object is the preferred method as "
"it provides support for advanced settings like mime type checking, "
"configurable options and requirement list (the plain command is only "
"provided for backward compatibility). When using a plain command, the "
"following tags are recognized:
  • %in: the input file "
"(required).
  • %out: the output file (required if using an "
"output file).
  • %psl: the paper size in lower case.
  • "
"%psu: the paper size with the first letter in upper case.
"
msgstr ""

#: management/kmspecialprinterdlg.cpp:118
msgid ""
"
The default mimetype for the output file (e.g. application/postscript)."
msgstr ""

#: management/kmspecialprinterdlg.cpp:121
msgid "
The default extension for the output file (e.g. ps, pdf, ps.gz).
"
msgstr ""
"
Uobičajen nastavak imena izlazne datoteke (npr. ps, pdf, ps.gz).
"

#: management/kmspecialprinterdlg.cpp:170
msgid "You must provide a non-empty name."
msgstr "Morate navesti ulaznu datoteku."

#: management/kmspecialprinterdlg.cpp:178
#, c-format
msgid "Invalid settings. %1."
msgstr "Neispravne postavke, %1."

#: management/kmspecialprinterdlg.cpp:197
#, c-format
msgid "Configuring %1"
msgstr "Podešavanje %1"

#: management/kmwbackend.cpp:54
msgid "Backend Selection"
msgstr "Odabir pozadinskog programa"

#: management/kmwbackend.cpp:68
msgid "You must select a backend."
msgstr "Morate navesti pozadinu!"

#: management/kmwbackend.cpp:115
msgid "&Local printer (parallel, serial, USB)"
msgstr "&Lokalni pisač (paralelni, serijski, USB)"

#: management/kmwbackend.cpp:116
msgid ""
"
Locally-connected printer
Use this for a printer connected to "
"the computer via a parallel, serial or USB port.
"
msgstr ""

#: management/kmwbackend.cpp:122
msgid "&SMB shared printer (Windows)"
msgstr "&SMB (Windows) dijeljeni pisač "

#: management/kmwbackend.cpp:123
msgid ""
"
Shared Windows printer
Use this for a printer installed on a "
"Windows server and shared on the network using the SMB protocol (samba)."
msgstr ""

#: management/kmwbackend.cpp:130
msgid "&Remote LPD queue"
msgstr "&Udaljeni LPD red"

#: management/kmwbackend.cpp:131
msgid ""
"
Print queue on a remote LPD server
Use this for a print queue "
"existing on a remote machine running a LPD print server.
"
msgstr ""

#: management/kmwbackend.cpp:137
msgid "Ne&twork printer (TCP)"
msgstr "Mrežni pisač (TCP)"

#: management/kmwbackend.cpp:138
msgid ""
"
Network TCP printer
Use this for a network-enabled printer "
"using TCP (usually on port 9100) as communication protocol. Most network "
"printers can use this mode.
"
msgstr ""

#: management/kmwclass.cpp:37
msgid "Class Composition"
msgstr "Sastav klase"

#: management/kmwclass.cpp:52
msgid "Available printers:"
msgstr "Dostupni pisači:"

#: management/kmwclass.cpp:53
msgid "Class printers:"
msgstr "Pisači klase:"

#: management/kmwclass.cpp:79
msgid "You must select at least one printer."
msgstr "Morate navesti barem jedan pisač!"

#: management/kmwdriver.cpp:33
msgid "Printer Model Selection"
msgstr "Odabir modela pisača"

#: management/kmwdriver.cpp:80 management/kmwend.cpp:106
#: management/kmwname.cpp:83
msgid "Raw printer"
msgstr "Obični pisač"

#: management/kmwdriver.cpp:113
msgid "Internal error: unable to locate the driver."
msgstr "Interna pogreška: Nije moguće pronaći upravljački program."

#: management/kmwdriverselect.cpp:37
msgid "Driver Selection"
msgstr "Odabir upravljačkog programa"

#: management/kmwdriverselect.cpp:43
msgid ""
"
Several drivers have been detected for this model. Select the driver you "
"want to use. You will have the opportunity to test it as well as to change "
"it if necessary.
"
msgstr ""
"
Za ovaj model je nađeno nekoliko upravljačkih programa. Odaberite "
"upravljački program koji želite koristiti. Imat ćete priliku isprobati ga i "
"po potrebi izmijeniti.
"

#: management/kmwdriverselect.cpp:46
msgid "Driver Information"
msgstr "Informacije o upravljačkom programu"

#: management/kmwdriverselect.cpp:62
msgid "You must select a driver."
msgstr "Morate navesti upravljački program!"

#: management/kmwdriverselect.cpp:82
msgid " [recommended]"
msgstr " [preporučeno]"

#: management/kmwdriverselect.cpp:113
msgid "No information about the selected driver."
msgstr "Nemam podataka o odabarnom goniču."

#: management/kmwdrivertest.cpp:41
msgid "Printer Test"
msgstr "Proba pisača"

#: management/kmwdrivertest.cpp:51
msgid "Manufacturer:"
msgstr "Proizvođač:"

#: management/kmwdrivertest.cpp:52
msgid "Model:"
msgstr "Model:"

#: management/kmwdrivertest.cpp:53
msgid "Description:"
msgstr "Opis:"

#: management/kmwdrivertest.cpp:55
msgid "&Test"
msgstr "&Proba"

#: management/kmwdrivertest.cpp:59
msgid ""
"
Now you can test the printer before finishing installation. Use the "
"Settings button to configure the printer driver and the Test "
"button to test your configuration. Use the Back button to change the "
"driver (your current configuration will be discarded).
"
msgstr ""
"
 Sada možete probati pisač prije negoli završite postavljanje. Koristite "
"Postavke gumb za podešavanje pisača i Proba gumb za probanje "
"postavki. Koristite Natrag gumb za promjenu upravljačkog programa, "
"pri čemu će sve sadašnje postavke biti odbačene.
"

#: management/kmwdrivertest.cpp:117
msgid "Unable to load the requested driver:
%1
"
msgstr "Nije moguće učitati traženi upravljački program:
%1
"

#: management/kmwdrivertest.cpp:146
msgid ""
"Test page successfully sent to printer. Wait until printing is complete, "
"then click the OK button."
msgstr ""
"Probna stranica uspješno poslana na pisač. Po završetku ispisa, kliknite na "
"gumb Ok."

#: management/kmwdrivertest.cpp:148
msgid "Unable to test printer: "
msgstr "Nije moguće provjeriti pisač: "

#: management/kmwdrivertest.cpp:150
msgid "Unable to remove temporary printer."
msgstr "Nije moguće ukloniti privremeni pisač."

#: management/kmwdrivertest.cpp:153
msgid "Unable to create temporary printer."
msgstr "Nije moguće izraditi privremeni pisač."

#: management/kmwend.cpp:33
msgid "Confirmation"
msgstr "Potvrda"

#: management/kmwend.cpp:50 management/kmwend.cpp:106 management/kmwend.cpp:109
#: tdefilelist.cpp:102
msgid "Type"
msgstr "Vrsta"

#: management/kmwend.cpp:52
msgid "Location"
msgstr "Lokacija"

#: management/kmwend.cpp:53 management/kmwend.cpp:112
#: management/kxmlcommanddlg.cpp:142 management/kxmlcommanddlg.cpp:545
msgid "Description"
msgstr "Opis"

#: management/kmwend.cpp:69
msgid "Backend"
msgstr "Backend"

#: management/kmwend.cpp:74
msgid "Device"
msgstr "Uređaj"

#: management/kmwend.cpp:77
msgid "Printer IP"
msgstr "IP Pisača"

#: management/kmwend.cpp:78 management/kmwend.cpp:89
msgid "Port"
msgstr "Port"

#: management/kmwend.cpp:81 management/kmwend.cpp:88
msgid "Host"
msgstr "Računalo"

#: management/kmwend.cpp:82 rlpr/kmproprlpr.cpp:48
msgid "Queue"
msgstr "Red"

#: management/kmwend.cpp:91
msgid "Account"
msgstr "Račun"

#: management/kmwend.cpp:96
msgid "URI"
msgstr "URL"

#: management/kmwend.cpp:109
msgid "DB driver"
msgstr "DB upravljački program"

#: management/kmwend.cpp:109
msgid "External driver"
msgstr "Vanjski upravljački program"

#: management/kmwend.cpp:110
msgid "Manufacturer"
msgstr "Proizvođač"

#: management/kmwend.cpp:111
msgid "Model"
msgstr "Model"

#: management/kmwfile.cpp:35
msgid "File Selection"
msgstr "Odabir datoteka"

#: management/kmwfile.cpp:41
msgid ""
"
The printing will be redirected to a file. Enter here the path of the "
"file you want to use for redirection. Use an absolute path or the browse "
"button for graphical selection.
"
msgstr ""
"
 Ispis će biti preusmjeren u datoteku. Unesite putanju datoteke u koju "
"želite preusmjeriti ispis. Koristite apslolutnu putanju ili koristite gumb "
"za grafički odabir pomoću dijaloga.
"

#: management/kmwfile.cpp:44
msgid "Print to file:"
msgstr "Ispis u datoteku:"

#: management/kmwfile.cpp:66
msgid "Directory does not exist."
msgstr "Imenik ne postoji."

#: management/kmwinfopage.cpp:32
msgid "Introduction"
msgstr "Uvod"

#: management/kmwinfopage.cpp:37
msgid ""
"
Welcome,

This wizard will help to install a new printer on your "
"computer. It will guide you through the various steps of the process of "
"installing and configuring a printer for your printing system. At each step, "
"you can always go back using the Back button.

We hope you "
"enjoy this tool!

"
msgstr ""

#: management/kmwizard.cpp:64 management/kmwizard.cpp:209
msgid "&Next >"
msgstr "&Dalje >"

#: management/kmwizard.cpp:66
msgid "< &Back"
msgstr "< Natra&g"

#: management/kmwizard.cpp:131 management/kmwizard.cpp:166
#: management/kmwizard.cpp:191
msgid "Add Printer Wizard"
msgstr "Čarobnjak za dodavanje pisača"

#: management/kmwizard.cpp:166
msgid "Modify Printer"
msgstr "Izmjena postavki pisača"

#: management/kmwizard.cpp:191
msgid "Unable to find the requested page."
msgstr "Nije moguće pronaći traženu stranicu."

#: management/kmwizard.cpp:207 management/kmwizard.cpp:234
msgid "&Finish"
msgstr "&Završi"

#: management/kmwlocal.cpp:38
msgid "Local Port Selection"
msgstr "Izbor lokalnog porta"

#: management/kmwlocal.cpp:50
msgid "Local System"
msgstr "Lokalni sustav"

#: management/kmwlocal.cpp:57
msgid "Parallel"
msgstr "Paralelni"

#: management/kmwlocal.cpp:58
msgid "Serial"
msgstr "Serijski"

#: management/kmwlocal.cpp:59
msgid "USB"
msgstr "USB"

#: management/kmwlocal.cpp:63
msgid ""
"
Select a valid detected port, or enter directly the corresponding URI in "
"the bottom edit field.
"
msgstr ""
"
Odaberite ispravno prepoznat port ili unesite direktno odgovarajući URL u "
"donje polje.
"

#: management/kmwlocal.cpp:78
msgid ""
"_: The URI is empty\n"
"Empty URI."
msgstr ""

#: management/kmwlocal.cpp:83
msgid "The local URI doesn't correspond to a detected port. Continue?"
msgstr "Lokalni URL ne odgovara nađenom portu. Nastaviti?"

#: management/kmwlocal.cpp:85
msgid "Select a valid port."
msgstr "Izaberite valjani port."

#: management/kmwlocal.cpp:166
msgid "Unable to detect local ports."
msgstr "Nije moguće otrkivati lokalne portove."

#: management/kmwlpd.cpp:41
msgid "LPD Queue Information"
msgstr "Podaci o LPD redu"

#: management/kmwlpd.cpp:44
msgid ""
"
Enter the information concerning the remote LPD queue; this wizard will "
"check it before continuing.
"
msgstr ""
"
Unesite podatke o udaljenom LPD redu; ovaj čarobnjak će ih provjeriti "
"prije nastavka.
"

#: management/kmwlpd.cpp:47 rlpr/kmproprlpr.cpp:35 rlpr/kmwrlpr.cpp:63
msgid "Queue:"
msgstr "Red:"

#: management/kmwlpd.cpp:54
msgid "Some information is missing."
msgstr "Neki podaci nedostaju."

#: management/kmwlpd.cpp:61
#, fuzzy
msgid "Cannot find queue %1 on server %2; do you want to continue anyway?"
msgstr "Ne mogu naći red %1 na serveru %2! Želite li svejedno nastaviti?"

#: management/kmwname.cpp:34
msgid "General Information"
msgstr "Opće informacije"

#: management/kmwname.cpp:37
msgid ""
"
Enter the information concerning your printer or class. Name is "
"mandatory, Location and Description are not (they may even not "
"be used on some systems).
"
msgstr ""

#: management/kmwname.cpp:39
msgid "Name:"
msgstr "Ime:"

#: management/kmwname.cpp:48
msgid "You must supply at least a name."
msgstr "Morate upisati barem ime!"

#: management/kmwname.cpp:56
msgid ""
"It is usually not a good idea to include spaces in printer name: it may "
"prevent your printer from working correctly. The wizard can strip all spaces "
"from the string you entered, resulting in %1; what do you want to do?"
msgstr ""
"Obično nije dobro upisati ime pisača koje sadrži razmake. To može praviti "
"probleme u radu pisača. Čarobnjak može sam maknuti sve razmake iz imena koje "
"ste upisali, pa će ono izgledati ovako: %1. Što želite?"

#: management/kmwname.cpp:62
msgid "Strip"
msgstr "Makni"

#: management/kmwpassword.cpp:37
msgid "User Identification"
msgstr "Podaci o korisniku"

#: management/kmwpassword.cpp:43
msgid ""
"
This backend may require a login/password to work properly. Select the "
"type of access to use and fill in the login and password entries if needed."
msgstr ""

#: management/kmwpassword.cpp:49
msgid "&Login:"
msgstr "&Prijava:"

#: management/kmwpassword.cpp:53
msgid "&Anonymous (no login/password)"
msgstr "&Anonimni (nema korisničkog imena/lozinke)"

#: management/kmwpassword.cpp:54
msgid "&Guest account (login=\"guest\")"
msgstr "&Gost račun (login=\"guest\")"

#: management/kmwpassword.cpp:55
msgid "Nor&mal account"
msgstr "Uobičaje&ni korisnički račun"

#: management/kmwpassword.cpp:88
msgid "Select one option"
msgstr "Odaberi jednu opciju"

#: management/kmwpassword.cpp:90
msgid "User name is empty."
msgstr "Ime korisnika je prazno!"

#: management/kmwsmb.cpp:35
msgid "SMB Printer Settings"
msgstr "Postavke dijeljenog (SMB) pisača"

#: management/kmwsmb.cpp:41
msgid "Scan"
msgstr "Pretraži"

#: management/kmwsmb.cpp:42
msgid "Abort"
msgstr "Prekid"

#: management/kmwsmb.cpp:44
msgid "Workgroup:"
msgstr "Radna grupa:"

#: management/kmwsmb.cpp:45
msgid "Server:"
msgstr "Poslužitelj:"

#: management/kmwsmb.cpp:46 tools/escputil/escpwidget.cpp:99
msgid "Printer:"
msgstr "Pisač:"

#: management/kmwsmb.cpp:81 rlpr/kmrlprmanager.cpp:45
msgid "Empty printer name."
msgstr "Prazno ime pisača."

#: management/kmwsmb.cpp:99
#, c-format
msgid "Login: %1"
msgstr "Prijava: %1"

#: management/kmwsmb.cpp:99
msgid ""
msgstr ""

#: management/kmwsocket.cpp:38
msgid "Network Printer Information"
msgstr "Podaci o mrežnom pisaču"

#: management/kmwsocket.cpp:48
msgid "&Printer address:"
msgstr "Adresa &pisača:"

#: management/kmwsocket.cpp:49
msgid "P&ort:"
msgstr "P&ort:"

#: management/kmwsocket.cpp:99
msgid "You must enter a printer address."
msgstr "Morate upisati adresu pisača!"

#: management/kmwsocket.cpp:110
msgid "Wrong port number."
msgstr "Krivi broj porta."

#: management/kmwsocketutil.cpp:52 management/networkscanner.cpp:338
msgid "&Subnetwork:"
msgstr "&Podmreža:"

#: management/kmwsocketutil.cpp:54 management/networkscanner.cpp:340
msgid "&Timeout (ms):"
msgstr "&Vrijeme (timeout - ms):"

#: management/kmwsocketutil.cpp:92 management/networkscanner.cpp:378
msgid "Scan Configuration"
msgstr "Pretraži postavu"

#: management/kmwsocketutil.cpp:104 management/kmwsocketutil.cpp:110
#: management/networkscanner.cpp:390 management/networkscanner.cpp:396
msgid "Wrong subnetwork specification."
msgstr "Krivo postavljena podmreža."

#: management/kmwsocketutil.cpp:118 management/networkscanner.cpp:404
msgid "Wrong timeout specification."
msgstr "Krivo podešeno vrijeme."

#: management/kmwsocketutil.cpp:121 management/networkscanner.cpp:407
msgid "Wrong port specification."
msgstr "Krivo navedeni port."

#: management/kxmlcommanddlg.cpp:108
msgid "Integer"
msgstr "Cijeli broj"

#: management/kxmlcommanddlg.cpp:109
msgid "Float"
msgstr "Razlomak"

#: management/kxmlcommanddlg.cpp:110
msgid "List"
msgstr "Popis"

#: management/kxmlcommanddlg.cpp:118
msgid "Default &value:"
msgstr "Uobičajena &vrijednost:"

#: management/kxmlcommanddlg.cpp:119
msgid "Co&mmand:"
msgstr "&Naredba:"

#: management/kxmlcommanddlg.cpp:126
msgid "&Persistent option"
msgstr "Trajna opcija"

#: management/kxmlcommanddlg.cpp:128
msgid "Va&lues"
msgstr "&Vrijednosti"

#: management/kxmlcommanddlg.cpp:136
msgid "Minimum v&alue:"
msgstr "Minimaln&a vrijednost:"

#: management/kxmlcommanddlg.cpp:137
msgid "Ma&ximum value:"
msgstr "Ma&ksimalna vrijednost:"

#: management/kxmlcommanddlg.cpp:150
msgid "Add value"
msgstr "Dodaj vrijednost"

#: management/kxmlcommanddlg.cpp:151
msgid "Delete value"
msgstr "Obriši vrijednost"

#: management/kxmlcommanddlg.cpp:153
msgid "Apply changes"
msgstr "Primijeni izmjene"

#: management/kxmlcommanddlg.cpp:154
msgid "Add group"
msgstr "Dodaj grupu"

#: management/kxmlcommanddlg.cpp:155
msgid "Add option"
msgstr "Dodaj odrednicu"

#: management/kxmlcommanddlg.cpp:156
msgid "Delete item"
msgstr "Obriši stavku"

#: management/kxmlcommanddlg.cpp:157 tdefilelist.cpp:135
msgid "Move up"
msgstr "Pomakni gore"

#: management/kxmlcommanddlg.cpp:158 tdefilelist.cpp:142
msgid "Move down"
msgstr "Pomakni dolje"

#: management/kxmlcommanddlg.cpp:162
msgid "&Input From"
msgstr "Ulazn&i formular"

#: management/kxmlcommanddlg.cpp:163
msgid "O&utput To"
msgstr "&Izlaz u"

#: management/kxmlcommanddlg.cpp:164 management/kxmlcommanddlg.cpp:166
msgid "File:"
msgstr "Datoteka:"

#: management/kxmlcommanddlg.cpp:165 management/kxmlcommanddlg.cpp:167
msgid "Pipe:"
msgstr "Preusmjerenje:"

#: management/kxmlcommanddlg.cpp:285
msgid ""
"An identification string. Use only alphanumeric characters except spaces. "
"The string __root__ is reserved for internal use."
msgstr ""
"Identifikacijski niz znakova. Korisite samo alfanumeričke znakove bez "
"praznina. Niz znakova __root__ je rezerviran za interrnu upotrebu."

#: management/kxmlcommanddlg.cpp:289
msgid ""
"A description string. This string is shown in the interface, and should be "
"explicit enough about the role of the corresponding option."
msgstr ""
"Opis stringa. String je prikazan u sučelju, i morao bi biti dovoljno izričit "
"o funkciji odgovarajućih mogućnosti."

#: management/kxmlcommanddlg.cpp:293
msgid ""
"The type of the option. This determines how the option is presented "
"graphically to the user."
msgstr ""
"Tip opcije. Ovo određuje kako je opcija grafički prezentirana korisniku."

#: management/kxmlcommanddlg.cpp:297
msgid ""
"The format of the option. This determines how the option is formatted for "
"inclusion in the global command line. The tag %value can be used to "
"represent the user selection. This tag will be replaced at run-time by a "
"string representation of the option value."
msgstr ""
"Format opcije. Ovo određuje kako je opcija formatirana za uključivanje u "
"globalnu komandnu liniju. Tag %vrijednost može predstavljati "
"korisnički odabir. Ovaj tag će za vrijeme izvođenja biti zamijenjen sa "
"string vrijednošću opcije."

#: management/kxmlcommanddlg.cpp:303
msgid ""
"The default value of the option. For non persistent options, nothing is "
"added to the command line if the option has that default value. If this "
"value does not correspond to the actual default value of the underlying "
"utility, make the option persistent to avoid unwanted effects."
msgstr ""
"Uobičajena vrijednost opcije. Za netrajne opcije, ništa nije dodano "
"komandnoj liniji ako opcija ima tu uobičajenu vrijednost.Ako ova vrijednost "
"nije jednaka pravoj uobičajenoj vrijednosti podređenog alata, napravite "
"opciju trajno da izbjegnete neželjene efekte."

#: management/kxmlcommanddlg.cpp:309
msgid ""
"Make the option persistent. A persistent option is always written to the "
"command line, whatever its value. This is useful when the chosen default "
"value does not match with the actual default value of the underlying utility."
msgstr ""
"Učini opciju trajnom. Trajna opcija je uvijek zapisana u naredbenoj liniji, "
"bez obzira na vrijednost. Ovo je korisno kada odabrana uobičajenavrijednost "
"nije jednaka pravoj uobičajenoj vrijednosti u podređenom alatu."

#: management/kxmlcommanddlg.cpp:313
#, c-format
msgid ""
"The full command line to execute the associated underlying utility. This "
"command line is based on a mechanism of tags that are replaced at run-time. "
"The supported tags are:
  • %filterargs: command options
  • %filterinput: input specification
  • %filteroutput: output specification
  • %psu: the page size in upper case
  • %psl: the page size in lower case
"
msgstr ""

#: management/kxmlcommanddlg.cpp:323
#, fuzzy, c-format
msgid ""
"Input specification when the underlying utility reads input data from a "
"file. Use the tag %in to represent the input filename."
msgstr ""
"Specifikacija ulaza kada alat za podršku čita podatke iz datoteke. Koristi "
"tag %out za opis naziva ulazne datoteke."

#: management/kxmlcommanddlg.cpp:327
#, fuzzy, c-format
msgid ""
"Output specification when the underlying utility writes output data to a "
"file. Use the tag %out to represent the output filename."
msgstr ""
"Specifikacija izlaza kada alat za podršku ispisuje izlazne podatke u "
"datoteku. Koristi tag %out za opis naziva izlazne datoteke."

#: management/kxmlcommanddlg.cpp:331
msgid ""
"Input specification when the underlying utility reads input data from its "
"standard input."
msgstr ""
"Spacifikacija unosa kad alat za podršku čita ulazne podatke sa svojeg "
"standardnog ulaza."

#: management/kxmlcommanddlg.cpp:335
msgid ""
"Output specification when the underlying utility writes output data to its "
"standard output."
msgstr ""
"Specifikacija ispisa kada alat za podršku ispisuje podatke na svoj "
"standardni izlaz."

#: management/kxmlcommanddlg.cpp:339
msgid ""
"A comment about the underlying utility, which can be viewed by the user from "
"the interface. This comment string supports basic HTML tags like <a>, "
"<b> or <i>."
msgstr ""
"Objašnjenje o donjim alatima, koji korisnik može vidjeti u sučelju. Ovo "
"objašnjenje podržaba osnovne HTML tagove kao <a>, <b> ili <"
"i>."

#: management/kxmlcommanddlg.cpp:568
msgid ""
"Invalid identification name. Empty strings and \"__root__\" are not allowed."
msgstr "Nepravilno ime. Prazna imena i \"__root__\" nisu dozvoljeni."

#: management/kxmlcommanddlg.cpp:649 management/kxmlcommanddlg.cpp:652
msgid "New Group"
msgstr "Nova grupa"

#: management/kxmlcommanddlg.cpp:668 management/kxmlcommanddlg.cpp:671
msgid "New Option"
msgstr "Nova odrednica"

#: management/kxmlcommanddlg.cpp:795 management/kxmlcommanddlg.cpp:939
#, c-format
msgid "Command Edit for %1"
msgstr "Uređivanje naredbe za %1"

#: management/kxmlcommanddlg.cpp:833
msgid "&Mime Type Settings"
msgstr "Postavke &Mime tipova"

#: management/kxmlcommanddlg.cpp:839
msgid "Supported &Input Formats"
msgstr "Podržani ulazn&i formati"

#: management/kxmlcommanddlg.cpp:851
msgid "&Edit Command..."
msgstr "Uređivanj&e naredbe..."

#: management/kxmlcommanddlg.cpp:868
msgid "Output &format:"
msgstr "Izlazni &format:"

#: management/kxmlcommanddlg.cpp:870
msgid "ID name:"
msgstr "ID ime:"

#: management/kxmlcommanddlg.cpp:1033
msgid "exec:/"
msgstr "izvrši:/"

#: management/kxmlcommandselector.cpp:54
msgid "New command"
msgstr "Nova naredba"

#: management/kxmlcommandselector.cpp:55
msgid "Edit command"
msgstr "Izmjena naredbe"

#: management/kxmlcommandselector.cpp:72
msgid "&Browse..."
msgstr "Po&traži..."

#: management/kxmlcommandselector.cpp:73
msgid "Use co&mmand:"
msgstr "Koristi &naredbu:"

#: management/kxmlcommandselector.cpp:174
msgid "Command Name"
msgstr "Ime naredbe"

#: management/kxmlcommandselector.cpp:174
msgid "Enter an identification name for the new command:"
msgstr "Unesite ime nove naredbe:"

#: management/kxmlcommandselector.cpp:183
msgid ""
"A command named %1 already exists. Do you want to continue and edit the "
"existing one?"
msgstr ""
"Naredba pod imenom %1 već postoji. Želite li nastaviti i izmijeniti "
"postojeću?"

#: management/kxmlcommandselector.cpp:220
#, fuzzy
msgid "Internal error. The XML driver for the command %1 could not be found."
msgstr "Interna greška. XML upravljački program za naredbu %1 nije nađen."

#: management/kxmlcommandselector.cpp:238
msgid "output"
msgstr "izlaz"

#: management/kxmlcommandselector.cpp:242
msgid "undefined"
msgstr "nedefinirano"

#: management/kxmlcommandselector.cpp:247
msgid "not allowed"
msgstr "nije dozvoljeno"

#: management/kxmlcommandselector.cpp:253
msgid "(Unavailable: requirements not satisfied)"
msgstr "(Nedostupno: zahtjevi nisu zadovoljeni)"

#: management/networkscanner.cpp:104 management/networkscanner.cpp:184
msgid "Sc&an"
msgstr "Pretraži"

#: management/networkscanner.cpp:111
msgid "Network scan:"
msgstr "Pretraživanje mreže:"

#: management/networkscanner.cpp:112 management/networkscanner.cpp:299
#: management/networkscanner.cpp:310
#, c-format
msgid "Subnet: %1"
msgstr "Podmreža: %1"

#: management/networkscanner.cpp:161
msgid ""
"You are about to scan a subnet (%1.*) that does not correspond to the "
"current subnet of this computer (%2.*). Do you want to scan the specified "
"subnet anyway?"
msgstr ""
"Vi imate namjeru pretražiti pod-mrežu (%1.*) koja ne odgovara trenutnoj "
"postavci pod-mreže na ovom računalu (%2.*). Želite li ipak pretražiti "
"određenu pod-mrežu?"

#: management/networkscanner.cpp:164
msgid "&Scan"
msgstr "Pretraži"

#: management/smbview.cpp:44
msgid "Comment"
msgstr "Komentar"

#: management/tdeprint_management_module.cpp:48
msgid "Select Command"
msgstr "Odaberi naredbu"

#: marginpreview.cpp:135
msgid "No preview available"
msgstr "Pregled nije dostupan."

#: marginwidget.cpp:37
msgid ""
"   
Top Margin
.  
This spinbox/text edit field lets you "
"control the top margin of your printout if the printing  application does "
"not define its margins internally. 
  
The setting works for instance "
"for ASCII text file printing, or for printing from KMail and  and "
"Konqueror.. 
 
Note:
This margin setting is not intended for "
"KOffice or OpenOffice.org printing,  because these applications (or rather "
"their users) are expected to do it by themselves.  It also does not work for "
"PostScript or PDF file, which in most cases have their margins hardcoded  "
"internally.
  
  
  
Additional hint for power users: "
"This TDEPrint GUI element matches  with the CUPS commandline job option "
"parameter:  
    -o page-top=...      # use values from \"0\" or "
"higher. \"72\" is equal to 1 inch.  
 
  "
msgstr ""

#: marginwidget.cpp:57
msgid ""
"   
Bottom Margin
.  
This spinbox/text edit field lets "
"you control the bottom margin of your printout if the printing  application "
"does not define its margins internally. 
  
The setting works for "
"instance for ASCII text file printing, or for printing from KMail and  and "
"Konqueror. 
 
Note:
This margin setting is not intended for "
"KOffice or OpenOffice.org printing,  because these applications (or rather "
"their users) are expected to do it by themselves.  It also does not work for "
"PostScript or PDF file, which in most cases have their margins hardcoded  "
"internally.
  
  
  
Additional hint for power users: "
"This TDEPrint GUI element matches  with the CUPS commandline job option "
"parameter:  
    -o page-bottom=...      # use values from \"0\" or "
"higher. \"72\" is equal to 1 inch.  
 "
msgstr ""

#: marginwidget.cpp:76
msgid ""
"   
Left Margin
.  
This spinbox/text edit field lets you "
"control the left margin of your printout if the printing  application does "
"not define its margins internally. 
  
The setting works for instance "
"for ASCII text file printing, or for printing from KMail and  and Konqueror. "
"
 
Note:
This margin setting is not intended for KOffice or "
"OpenOffice.org printing,  because these applications (or rather their users) "
"are expected to do it by themselves.  It also does not work for PostScript "
"or PDF file, which in most cases have their margins hardcoded  internally.  
  
  
Additional hint for power users: This TDEPrint "
"GUI element matches  with the CUPS commandline job option parameter:  "
"
    -o page-left=...      # use values from \"0\" or higher. \"72\" is "
"equal to 1 inch.  
 "
msgstr ""

#: marginwidget.cpp:95
msgid ""
"   
Right Margin
.  
This spinbox/text edit field lets you "
"control the right margin of your printout if the printing  application does "
"not define its margins internally. 
  
The setting works for instance "
"for ASCII text file printing, or for printing from KMail and  and Konqueror. "
"
 
Note:
This margin setting is not intended for KOffice or "
"OpenOffice.org printing,  because these applications (or rather their users) "
"are expected to do it by themselves.  It also does not work for PostScript "
"or PDF file, which in most cases have their margins hardcoded  internally.  
  
  
Additional hint for power users: This TDEPrint "
"GUI element matches  with the CUPS commandline job option parameter:  "
"
    -o page-right=...      # use values from \"0\" or higher. \"72\" is "
"equal to 1 inch.  
 "
msgstr ""

#: marginwidget.cpp:114
msgid ""
"   
Change Measurement Unit
.  
You can change the units of "
"measurement for the page margins here. Select from Millimeter, Centimeter, "
"Inch or Pixels (1 pixel == 1/72 inch).  
  "
msgstr ""

#: marginwidget.cpp:121
msgid ""
"   
Custom Margins Checkbox
.  
Enable this checkbox if "
"you want to modify the margins of your printouts  
You can change margin "
"settings in 4 ways:  
      
  • Edit the text fields. 
    •   
  • Click "
"spinbox arrows. 
    •   
  • Scroll wheel of wheelmouses. 
    •   
  • Drag "
"margins in preview frame with mouse. 
    •   
  Note: The margin "
"setting does not work if you load such files directly into  kprinter, which "
"have their print margins hardcoded internally, like as most  PDF or "
"PostScript files. It works for all ASCII text files however. It also may "
"not  work with non-TDE applications which fail to  fully utilize the "
"TDEPrint framework, such as OpenOffice.org. 
  "
msgstr ""

#: marginwidget.cpp:138
msgid ""
"   
\"Drag-your-Margins\" 
.  
Use your mouse to drag and set "
"each margin on this little preview window. 
  "
msgstr ""

#: marginwidget.cpp:148
msgid "&Use custom margins"
msgstr "&Koristi prilagođene margine"

#: marginwidget.cpp:158
msgid "&Top:"
msgstr "&Vrh:"

#: marginwidget.cpp:159
msgid "&Bottom:"
msgstr "D&no:"

#: marginwidget.cpp:160
msgid "Le&ft:"
msgstr "&Lijevo:"

#: marginwidget.cpp:161
msgid "&Right:"
msgstr "&Desno:"

#: marginwidget.cpp:164
msgid "Pixels (1/72nd in)"
msgstr "Pikseli (1/72nd in)"

#: marginwidget.cpp:167
msgid "Inches (in)"
msgstr "Inča (in)"

#: marginwidget.cpp:168
msgid "Centimeters (cm)"
msgstr "Centimetara (cm)"

#: marginwidget.cpp:169
msgid "Millimeters (mm)"
msgstr "Milimetara (mm)"

#: plugincombobox.cpp:33
#, fuzzy
msgid ""
" Print Subsystem Selection 
This combo box shows (and lets you "
"select) a print subsystem to be used by TDEPrint. (This print subsystem "
"must, of course, be installed inside your Operating System.) TDEPrint "
"usually auto-detects the correct print subsystem by itself upon first "
"startup. Most Linux distributions have \"CUPS\", the Common UNIX "
"Printing System. "
msgstr ""
"Ova kombo kutija prikazuje (i omogućava vam odabir) podsustava za "
"tiskanje koji će koristiti TDEPrint. (Ovaj podsustav za tiskanje mora, "
"naravno, biti instaliran unutar vašeg operativnog sustava). TDEPrint "
"gaobično uspijeva sam otkriti. Većina distribucija linux-a ima „CUPS“, "
"Common Unix Printing System."

#: plugincombobox.cpp:45
msgid "Print s&ystem currently used:"
msgstr "Sada korišten s&istem ispisa:"

#: plugincombobox.cpp:91
#, fuzzy
msgid ""
" Current Connection 
This line shows which CUPS server your PC "
"is currently connected to for printing and retrieving printer info. To "
"switch to a different CUPS server, click \"System Options\", then select "
"\"Cups server\" and fill in the required info. "
msgstr ""
"Ova linija prikazuje na koji CUPS poslužitelj je trenutno povezano vaše "
"računalo za tiskanje i dobavljanje informacija o tiskaču. Da bi ste se "
"prebacili na drugi CUPS poslužitelj, pritisnite „Sustavske opcije“, zatim "
"odaberite „CUPS poslužitelj“ i popunite potrebne podatke."

#: posterpreview.cpp:115
#, fuzzy
msgid ""
"Poster preview not available. Either the poster executable is not "
"properly installed, or you don't have the required version"
msgstr ""
"Pregled postera nije moguće. Ili izvršni program postera nije dobro "
"instaliran, ili nemate potrebnu inačicu programa."

#: ppdloader.cpp:232
msgid "(line %1): "
msgstr "(linija %1): "

#: rlpr/kmconfigproxy.cpp:29
msgid "Proxy"
msgstr "Proxy"

#: rlpr/kmconfigproxy.cpp:30
msgid "RLPR Proxy Server Settings"
msgstr "Postavke RLPR proxy poslužitelja"

#: rlpr/kmproprlpr.cpp:49 rlpr/kmwrlpr.cpp:50
msgid "Remote LPD Queue Settings"
msgstr "Postavke udaljenog LPD reda"

#: rlpr/kmproxywidget.cpp:32
msgid "Proxy Settings"
msgstr "Proxy postavke"

#: rlpr/kmproxywidget.cpp:36
msgid "&Use proxy server"
msgstr "Koristi proxy posl&užitelj"

#: rlpr/kmrlprmanager.cpp:47 rlpr/kmwrlpr.cpp:85
msgid "Empty host name."
msgstr "Prazno ime računala."

#: rlpr/kmrlprmanager.cpp:49 rlpr/kmwrlpr.cpp:87
msgid "Empty queue name."
msgstr "Prazno ime reda."

#: rlpr/kmrlprmanager.cpp:63
msgid "Printer not found."
msgstr "Pisač nije nađen."

#: rlpr/kmrlprmanager.cpp:75
msgid "Not implemented yet."
msgstr "Nije ugrađeno."

#: rlpr/kmwrlpr.cpp:124
msgid "Remote queue %1 on %2"
msgstr "Udaljeni red %1 na %2"

#: rlpr/kmwrlpr.cpp:199
msgid "No Predefined Printers"
msgstr "Nema postavljenih pisača"

#: rlpr/krlprprinterimpl.cpp:73
msgid "The printer is incompletely defined. Try to reinstall it."
msgstr "Pisač nije u cijelosti podešen. Pokušajte ga ponovno instalirati."

#: tdefilelist.cpp:42
msgid ""
"  Add File button 
This button calls the 'File Open' "
"dialog to let you select a file for printing. Note, that  
  • you can "
"select ASCII or International Text, PDF, PostScript, JPEG, TIFF, PNG, GIF "
"and many other graphic formats. 
  • you can select various files from "
"different paths and send them as one \"multi-file job\" to the printing "
"system. 
 "
msgstr ""

#: tdefilelist.cpp:54
#, fuzzy
msgid ""
"  Remove File button 
This button removes the highlighted file "
"from the list of to-be-printed files. "
msgstr ""
"Ovaj gumb uklanja osvjetljenu datoteku iz popisa datoteka za tiskanje."

#: tdefilelist.cpp:59
#, fuzzy
msgid ""
"  Move File Up button 
This button moves the highlighted file "
"up in the list of files to be printed.
 
In effect, this changes the "
"order of the files' printout.
 "
msgstr ""
"Ovaj gumb pomiče osvjetljenu datoteku za jedno mjesto na gore u listi "
"datoteka za tiskanje. Pojednostavljeno, ovo mijenja poredak datoteka za "
"tiskanje)."

#: tdefilelist.cpp:66
#, fuzzy
msgid ""
"  Move File Down button 
This button moves the highlighted file "
"down in the list of files to be printed.
 
In effect, this changes the "
"order of the files' printout.
 "
msgstr ""
"Ovaj gumb pomiče osvjetljenu datoteku za jedno mjesto na gore u listi "
"datoteka za tiskanje. Pojednostavljeno, ovo mijenja poredak datoteka za "
"tiskanje)."

#: tdefilelist.cpp:73
#, fuzzy
msgid ""
"  File Open button 
This button tries to open the highlighted "
"file, so you can view or edit it before you send it to the printing system. 
If you open files, TDEPrint will use the application matching the MIME "
"type of the file.
 "
msgstr ""
"Ovaj gumb pokušava otvoriti osvjetljenu datoteku, tako da  ju možete "
"vidjeti ili urediti prije no što ga pošaljete na sustav za tiskanje."

#: tdefilelist.cpp:82
msgid ""
"  File List view 
This list displays all the files you selected "
"for printing. You can see the file name(s), file path(s) and the file (MIME) "
"type(s) as determined by TDEPrint. You may re-arrange the  initial order of "
"the list  with the help of the arrow buttons on the right.
 
The files "
"will be printed as a single job, in the same order as displayed in the list."
"
 
Note: You can select multiple files. The files may be in "
"multiple locations. The files may be of multiple MIME types. The buttons on "
"the right side let you add more files, remove already selected files from "
"the list,  re-order the list (by moving files up or down), and open files. "
"If you open files, TDEPrint will use the application matching the MIME type "
"of the file.
 "
msgstr ""

#: tdefilelist.cpp:103
msgid "Path"
msgstr "Putanja"

#: tdefilelist.cpp:115
msgid "Add file"
msgstr "Dodaj datoteku"

#: tdefilelist.cpp:121
msgid "Remove file"
msgstr "Ukloni datoteku"

#: tdefilelist.cpp:128
msgid "Open file"
msgstr "Otvori datoteku"

#: tdefilelist.cpp:149
msgid ""
"Drag file(s) here or use the button to open a file dialog. Leave empty for "
"<STDIN>."
msgstr ""
"Dovucite datoteku(e) ovdje ili koristite dijalog za otvaranje datoteki. "
"Ostavite prazno za <STDIN>."

#: tdeprintd.cpp:176
msgid ""
"Some of the files to print are not readable by the TDE print daemon. This "
"may happen if you are trying to print as a different user to the one "
"currently logged in. To continue printing, you need to provide root's "
"password."
msgstr ""
"Neke od datoteka za ispis nisu čitljive TDE izvršitelju. Ovo se može "
"dogoditi ako pokušavate ispisati datoteke drugih korisnika. Za nastavak "
"ispisa morate upisati root-ovu šifru (on im ovlasti pristupa)."

#: tdeprintd.cpp:181
#, fuzzy
msgid "Provide root's Password"
msgstr "Upišite root-ovu šifru"

#: tdeprintd.cpp:200 tdeprintd.cpp:202
#, c-format
msgid "Printing Status - %1"
msgstr "Stanje ispisa - %1"

#: tdeprintd.cpp:263
msgid "Printing system"
msgstr "Sustav ispisa"

#: tdeprintd.cpp:266
msgid "Authentication failed (user name=%1)"
msgstr "Autentikacija nije uspjela (korisničko ime=%1)"

#: tools/escputil/escpwidget.cpp:45
msgid "EPSON InkJet Printer Utilities"
msgstr "Alati za EPSON InkJet pisače"

#: tools/escputil/escpwidget.cpp:91
msgid "&Use direct connection (might need root permissions)"
msgstr "&Koristi direktnu vezu (možda treba ovlasti root-a)"

#: tools/escputil/escpwidget.cpp:103
msgid "Clea&n print head"
msgstr "&Očisti glavu pisača"

#: tools/escputil/escpwidget.cpp:104
msgid "&Print a nozzle test pattern"
msgstr "Is&piši uzorak za provjeru mlaznica"

#: tools/escputil/escpwidget.cpp:105
msgid "&Align print head"
msgstr "Por&avnaj glave pisača"

#: tools/escputil/escpwidget.cpp:106
msgid "&Ink level"
msgstr "Raz&ina tinte"

#: tools/escputil/escpwidget.cpp:107
msgid "P&rinter identification"
msgstr "Iden&tifikacija pisača"

#: tools/escputil/escpwidget.cpp:153
msgid "Internal error: no device set."
msgstr "Interna greška: nije podešen nikakav uređaj."

#: tools/escputil/escpwidget.cpp:164
#, c-format
msgid "Unsupported connection type: %1"
msgstr "Nije podržana vrsta veze: %1"

#: tools/escputil/escpwidget.cpp:171
msgid ""
"An escputil process is still running. You must wait until its completion "
"before continuing."
msgstr ""
"Proces escputil još uvijek radi. Morate čekati dok on završi da biste mogli "
"nastaviti."

#: tools/escputil/escpwidget.cpp:179
msgid ""
"The executable escputil cannot be found in your PATH environment variable. "
"Make sure gimp-print is installed and that escputil is in your PATH."
msgstr ""
"Izvršna datoteka escputil nije nađena u vašoj PATH okolišnoj varijabli. "
"Provjerite je li gimp-print postavljen i je li escputil u vašoj putanji."

#: tools/escputil/escpwidget.cpp:204
msgid "Internal error: unable to start escputil process."
msgstr "Interna pogreška: Nije moguće pokrenuti proces escputil."

#: tools/escputil/escpwidget.cpp:214
msgid "Operation terminated with errors."
msgstr "Operacija je završena sa greškama."

#: util.h:64
#, fuzzy
msgid "Envelope C5"
msgstr "US #10 omotnica"

#: util.h:65
#, fuzzy
msgid "Envelope DL"
msgstr "US #10 omotnica"

#: util.h:66
msgid "Envelope US #10"
msgstr ""

#: util.h:67
msgid "Executive"
msgstr ""

#: kprintpreviewui.rc:13
#, no-c-format
msgid "&PageMarks"
msgstr "&Oznake na stranici"

#, fuzzy
#~ msgid "Orientation"
#~ msgstr "&Usmjerenje"

#, fuzzy
#~ msgid "Print"
#~ msgstr "&Ispis"

#, fuzzy
#~ msgid "Cancel"
#~ msgstr "Otkazano"

#, fuzzy
#~ msgid "Fonts"
#~ msgstr "Putanja pisama"

#, fuzzy
#~ msgid "&Remove"
#~ msgstr "&Ukloni"

#, fuzzy
#~ msgid "Configure"
#~ msgstr "Podesi %1"

#, fuzzy
#~ msgid "Remove"
#~ msgstr "&Ukloni"

#, fuzzy
#~ msgid "Show &Toolbar"
#~ msgstr "Prikaz &trake s alatima"

#, fuzzy
#~ msgid "Add"
#~ msgstr "&Dodaj"

#, fuzzy
#~ msgid "Information"
#~ msgstr "Potvrda"

#, fuzzy
#~ msgid "Properties"
#~ msgstr "&Svojstva"

#, fuzzy
#~ msgid "&Settings"
#~ msgstr "Postavke..."

#, fuzzy
#~ msgid "File"
#~ msgstr "Datoteka:"

#, fuzzy
#~ msgid "&File"
#~ msgstr "&Datoteke"

#~ msgid "%1 &Handbook"
#~ msgstr "%1 &Priručnik"

#~ msgid "%1 &Web Site"
#~ msgstr "%1 &Web mjesto"

#~ msgid "Documentation"
#~ msgstr "Dokumentacija"

#~ msgid "&Settings..."
#~ msgstr "&Postavke..."

#, fuzzy
#~ msgid ""
#~ "TDE Add Printer Wizard 
This button starts the TDE Add "
#~ "Printer Wizard. (NOT if you use \"Generic LPD\" or "
#~ "\"LPRng\", or \"Print Through an External Program\".) "
#~ "Use the Wizard (with \"CUPS\" or \"RLPR\") to add "
#~ "locally defined printers to your system. "
#~ msgstr ""
#~ "Ovaj gumb pokreće TDE-ov čarobnjak za dodavanje tiskača. "
#~ "(Samo ukoliko NE koristite Generički LPD, LPRng, "
#~ "ili Tiskanje kroz vanjski program.) Koristite čarobnjaka (sa "
#~ "CUPS-om ili RLPR-om) za dodavanje lokalno definiranih "
#~ "tiskača na vaš sustav."

#, fuzzy
#~ msgid ""
#~ " Output Settings: Here you can determine the number of copies, "
#~ "the output order and the collate mode for the pages of your printjob."
#~ msgstr ""
#~ " Ovdje možete odrediti broj primjeraka, red ispisa i način "
#~ "razvrstavanja vašeg ispisa ."

#~ msgid "Toggle printer filtering"
#~ msgstr "Uključi/isključi filtriranje ispisa"

#~ msgid "Copies"
#~ msgstr "Kopija"

#~ msgid ""
#~ "No appropriate filter was found to convert the file format %1 into %2. Do "
#~ "you want to print the file using its original format?"
#~ msgstr ""
#~ "Nije nađen prikladni filter za pretvaranje oblika datoteke %1 u %2. "
#~ "Želite li ispisati datoteku u izvornom obliku?"

#~ msgid "Skip"
#~ msgstr "Preskoči"

#~ msgid "Empty URI."
#~ msgstr "Prazan URL."

#~ msgid ""
#~ " This button expands or reduces the TDE printing dialog. TDEPrint "
#~ "will remember what you do here; next time, it will start this dialog "
#~ "'expanded' or 'collapsed', depending on the mode you are using this "
#~ "time.... "
#~ msgstr ""
#~ "Ovaj gumb proširuje ili skraćuje TDE dijalog za ispis. TDEPrint će "
#~ "upamtiti štoste ovdje radili, i slijedeći put će prikazati dijalog "
#~ "„proširenim“ ili „skraćenim“, ovisno o načinu radaa kojegsada koristite..."
#~ ""

#~ msgid "Collaps&e"
#~ msgstr "Sm&anji"

#~ msgid "&Expand"
#~ msgstr "P&roširi"

#~ msgid "Connected to %1:%2"
#~ msgstr "Spojen sam na računalo %1:%2"

#~ msgid "IPP report for %1"
#~ msgstr "IPP izvješće za %1"

#~ msgid "&IPP Report..."
#~ msgstr "&IPP izvješće..."