# translation of kcminput.po to Norwegian Bokmål
# translation of kcminput.po to
# Norwegian translations for TDE Base, kcminput
# Copyright (C) 1998-2000 Hans Petter Bieker.
#
# Hans Petter Bieker <bieker@kde.org>, 1998-2000.
# Knut Yrvin <knuty@skolelinux.no>, 2002, 2005.
# Bjørn Steensrud <bjornst@powertech.no>, 2003.
# Knut Erik Hollund <khollund@responze.net>, 2003.
# Axel Bojer <axelb@skolelinux.no>, 2005, 2006.
# Nils Kristian Tomren <project@nilsk.net>, 2005.
msgid ""
msgstr ""
"Project-Id-Version: kcminput\n"
"POT-Creation-Date: 2014-09-29 00:47-0500\n"
"PO-Revision-Date: 2006-09-08 08:27+0200\n"
"Last-Translator: Bjørn Steensrud <bjornst@powertech.no>\n"
"Language-Team: Norwegian Bokmål <i18n-no@lister.ping.uio.no>\n"
"Language: \n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"<number1@realityx.net>\n"
"X-Generator: KBabel 1.11.2\n"

#: _translatorinfo.cpp:1
msgid ""
"_: NAME OF TRANSLATORS\n"
"Your names"
msgstr "Axel Bojer"

#: _translatorinfo.cpp:3
msgid ""
"_: EMAIL OF TRANSLATORS\n"
"Your emails"
msgstr "axelb@skolelinux.no"

#: logitechmouse.cpp:50 logitechmouse.cpp:92
#, c-format
msgid "Mouse type: %1"
msgstr "Musetype: %1"

#: logitechmouse.cpp:229
msgid ""
"RF channel 1 has been set. Please press Connect button on mouse to re-establish "
"link"
msgstr ""
"RF-kanal 1 er valgt. Trykk «Koble til» for å gjenopprette forbindelsen."

#: logitechmouse.cpp:229 logitechmouse.cpp:233
msgid "Press Connect Button"
msgstr "Trykk «Koble til»"

#: logitechmouse.cpp:233
msgid ""
"RF channel 2 has been set. Please press Connect button on mouse to re-establish "
"link"
msgstr "RF-kanal 2 er valgt. Trykk «Koble til» for å gjenopprette sambandet"

#: logitechmouse.cpp:370
msgid "none"
msgstr "ingen"

#: logitechmouse.cpp:373 logitechmouse.cpp:403
msgid "Cordless Mouse"
msgstr "Trådløs mus"

#: logitechmouse.cpp:376 logitechmouse.cpp:382 logitechmouse.cpp:385
msgid "Cordless Wheel Mouse"
msgstr "Trådløs hjulmus"

#: logitechmouse.cpp:379
msgid "Cordless MouseMan Wheel"
msgstr "Trådløs «Mouseman»-mus med rullehjul"

#: logitechmouse.cpp:388
msgid "Cordless TrackMan Wheel"
msgstr "Trådløs «Trackman»-mus med rullehjul"

#: logitechmouse.cpp:391
msgid "TrackMan Live"
msgstr "«Trackman live»-mus"

#: logitechmouse.cpp:394
msgid "Cordless TrackMan FX"
msgstr "Trådløs «Trackman FX»-mus"

#: logitechmouse.cpp:397
msgid "Cordless MouseMan Optical"
msgstr "Optisk trådløs «Mouseman»-mus"

#: logitechmouse.cpp:400
msgid "Cordless Optical Mouse"
msgstr "Trådløs optisk mus"

#: logitechmouse.cpp:406
msgid "Cordless MouseMan Optical (2ch)"
msgstr "Trådløs optisk «Mouseman»-mus (2 kanaler)"

#: logitechmouse.cpp:409
msgid "Cordless Optical Mouse (2ch)"
msgstr "Trådløs optisk mus (2 kanaler)"

#: logitechmouse.cpp:412
msgid "Cordless Mouse (2ch)"
msgstr "Trådløs mus (2 kanaler)"

#: logitechmouse.cpp:415
msgid "Cordless Optical TrackMan"
msgstr "Trådløs optisk «Trackman»-mus"

#: logitechmouse.cpp:418
msgid "MX700 Cordless Optical Mouse"
msgstr "Trådløs optisk «MX700»-mus"

#: logitechmouse.cpp:421
msgid "MX700 Cordless Optical Mouse (2ch)"
msgstr "Trådløs optisk «MX700»-mus (2 kanaler)"

#: logitechmouse.cpp:424
msgid "Unknown mouse"
msgstr "Ukjent mus"

#: mouse.cpp:84
msgid ""
"<h1>Mouse</h1> This module allows you to choose various options for the way in "
"which your pointing device works. Your pointing device may be a mouse, "
"trackball, or some other hardware that performs a similar function."
msgstr ""
"<h1>Mus</h1>Med denne modulen kan du velge hvordan pekeredskapet skal virke. "
"Istedenfor mus har du kanskje en styrekule "
"eller annet utstyr som utfører en lignende funksjon."

#: mouse.cpp:103
msgid "&General"
msgstr "&Generelt"

#: mouse.cpp:108
msgid ""
"If you are left-handed, you may prefer to swap the functions of the left and "
"right buttons on your pointing device by choosing the 'left-handed' option. If "
"your pointing device has more than two buttons, only those that function as the "
"left and right buttons are affected. For example, if you have a three-button "
"mouse, the middle button is unaffected."
msgstr ""
"Hvis du er venstrehendt, så kanskje du foretrekker å bytte funksjonene til "
"venstre og høyre knapp på pekeredskapet ditt ved å velge «venstrehendt». Hvis "
"pekeredskapet ditt har mer enn to knapper vil bare funksjonene på venstre og "
"høyre knapp bli påvirket. F.eks. vil den midterste knappen på en treknappers "
"mus forbli uendret."

#: mouse.cpp:118
msgid ""
"The default behavior in TDE is to select and activate icons with a single click "
"of the left button on your pointing device. This behavior is consistent with "
"what you would expect when you click links in most web browsers. If you would "
"prefer to select with a single click, and activate with a double click, check "
"this option."
msgstr ""
"Standard i TDE er å velge og starte ikoner med et enkelt klikk med venstre "
"museknapp. Slik er det også i de fleste nettleserne. Hvis du foretrekker å "
"velge med et enkeltklikk og heller starte med et dobbeltklikk, så ikke kryss av "
"for dette valget."

#: mouse.cpp:126
msgid "Activates and opens a file or folder with a single click."
msgstr "Starter og åpner en fil eller mappe med et enkelt trykk."

#: mouse.cpp:132
msgid ""
"If you check this option, pausing the mouse pointer over an icon on the screen "
"will automatically select that icon. This may be useful when single clicks "
"activate icons, and you want only to select the icon without activating it."
msgstr ""
"Hvis dette valget er avkrysset, vil ikonet automatisk bli valgt hvis du holder "
"musepekeren over ikonet. Dette kan være nyttig hvis enkeltklikk starter ikoner "
"og du ønsker å merke ikoner uten å starte programmet."

#: mouse.cpp:144
msgid ""
"If you have checked the option to automatically select icons, this slider "
"allows you to select how long the mouse pointer must be paused over the icon "
"before it is selected."
msgstr ""
"Hvis du har krysset av for automatisk å velge ikoner, vil dette feltet gi deg "
"mulighet til å bestemme hvor lenge du må holde musa over et ikon før det blir "
"valgt."

#: mouse.cpp:149
msgid "Show feedback when clicking an icon"
msgstr "Vis tilbakemelding når et ikon blir valgt"

#: mouse.cpp:181
msgid "&Cursor Theme"
msgstr "&Pekertema"

#: mouse.cpp:185
msgid "Advanced"
msgstr "Avansert"

#: mouse.cpp:191
msgid "Pointer acceleration:"
msgstr "Pekerakselerasjon:"

#: mouse.cpp:196
msgid ""
"This option allows you to change the relationship between the distance that the "
"mouse pointer moves on the screen and the relative movement of the physical "
"device itself (which may be a mouse, trackball, or some other pointing device.)"
"<p> A high value for the acceleration will lead to large movements of the mouse "
"pointer on the screen even when you only make a small movement with the "
"physical device. Selecting very high values may result in the mouse pointer "
"flying across the screen, making it hard to control."
msgstr ""
"Dette valget gir deg mulighet til å endre sammenhengen mellom avstanden "
"musepekeren flyttes på skjermen og den fysiske enheten (som kan være en mus, "
"styrekule eller et annet pekeredskap)."
"<p>En høy akselerasjonsverdi vil føre til at musepekeren flytter seg langt selv "
"om du bare gjør små bevegelser med musa. Hvis du velger veldig høye verdier kan "
"det føre til at musepekeren flyr over skjermen og gjør det vanskelig å styre "
"den."

#: mouse.cpp:209
msgid "Pointer threshold:"
msgstr "Pekerterskel:"

#: mouse.cpp:217
msgid ""
"The threshold is the smallest distance that the mouse pointer must move on the "
"screen before acceleration has any effect. If the movement is smaller than the "
"threshold, the mouse pointer moves as if the acceleration was set to 1X;"
"<p> thus, when you make small movements with the physical device, there is no "
"acceleration at all, giving you a greater degree of control over the mouse "
"pointer. With larger movements of the physical device, you can move the mouse "
"pointer rapidly to different areas on the screen."
msgstr ""
"Terskelen er den minste avstanden musepekeren må flyttes på skjermen før "
"akselerasjon trer i kraft. Hvis den blir flyttet en kortere avstand enn "
"terskelen, vil pekeren flytte seg som om akselerasjonen var satt til 1X."
"<p>Det betyr at det ikke vil skje noe hvis du flytter musa veldig lite. Dette "
"gir stor kontroll over musepekeren. Med større bevegelser kan du raskt flytte "
"pekeren til andre deler av skjermen."

#: mouse.cpp:229
msgid "Double click interval:"
msgstr "Dobbeltklikkintervall:"

#: mouse.cpp:231 mouse.cpp:279 mouse.cpp:333 mouse.cpp:341 mouse.cpp:350
msgid " msec"
msgstr " ms"

#: mouse.cpp:236
msgid ""
"The double click interval is the maximal time (in milliseconds) between two "
"mouse clicks which turns them into a double click. If the second click happens "
"later than this time interval after the first click, they are recognized as two "
"separate clicks."
msgstr ""
"Dobbeltklikkintervall er den lengste tiden (i millisekunder) mellom to "
"museklikk som gjør dem til et dobbeltklikk. Hvis det andre klikket skjer etter "
"dette tidspunktet, vil de bli oppfattet som to enkeltklikk."

#: mouse.cpp:246
msgid "Double-click on the image below to test your double-click interval:"
msgstr ""

#: mouse.cpp:248
msgid ""
"The image will change when your double-click test time is less than or equal to "
"the interval you configured. When changing the interval, be sure to select the "
"Apply button before testing. For example, the image will not change when you "
"configure a double-click interval of 700 milliseconds and the time between two "
"successive clicks on the image is 800 milliseconds, but the image will change "
"when the time between clicks is 600 milliseconds. The goal is to select a "
"comfortable interval that you find is not too fast or slow."
msgstr ""

#: mouse.cpp:277
msgid "Drag start time:"
msgstr "Starttid for draoperasjoner:"

#: mouse.cpp:284
msgid ""
"If you click with the mouse (e.g. in a multi-line editor) and begin to move the "
"mouse within the drag start time, a drag operation will be initiated."
msgstr ""
"Hvis du klikker med en museknapp (f.eks. i et skriveprogram med flere linjer) "
"og begynner å flytte musa før starttiden er over, så vil en draoperasjon settes "
"i gang."

#: mouse.cpp:290
msgid "Drag start distance:"
msgstr "Startavstand for draoperasjon:"

#: mouse.cpp:298
msgid ""
"If you click with the mouse and begin to move the mouse at least the drag start "
"distance, a drag operation will be initiated."
msgstr ""
"Hvis du klikker med musepekeren og drar musa mer enn startavstanden, settes en "
"draoperasjon i gang."

#: mouse.cpp:304
msgid "Mouse wheel scrolls by:"
msgstr "Musehjulet ruller med:"

#: mouse.cpp:312
msgid ""
"If you use the wheel of a mouse, this value determines the number of lines to "
"scroll for each wheel movement. Note that if this number exceeds the number of "
"visible lines, it will be ignored and the wheel movement will be handled as a "
"page up/down movement."
msgstr ""
"Hvis du bruker en mus med rullehjul, kan du her velge hvor mange linjer teksten "
"skal flytte seg når du ruller på hjulet. Legg merke til at dersom dette tallet "
"er større enn antall synlige linjer, så blir teksten i stedet bare flyttet en "
"side fram eller tilbake."

#: mouse.cpp:318
msgid "Mouse Navigation"
msgstr "Musenavigering"

#: mouse.cpp:326
msgid "&Move pointer with keyboard (using the num pad)"
msgstr "Flytt &musepekeren med det numeriske tastaturet"

#: mouse.cpp:332
msgid "&Acceleration delay:"
msgstr "&Akselerasjonsforsinkelse:"

#: mouse.cpp:340
msgid "R&epeat interval:"
msgstr "R&epetisjonsintervall:"

#: mouse.cpp:348
msgid "Acceleration &time:"
msgstr "Akselerasjons&tid:"

#: mouse.cpp:356
msgid "Ma&ximum speed:"
msgstr "&Høyeste fart:"

#: mouse.cpp:358
msgid " pixel/sec"
msgstr " piksler/sek"

#: mouse.cpp:364
msgid "Acceleration &profile:"
msgstr "Akselerasjons&profil:"

#: mouse.cpp:437
msgid "Mouse"
msgstr "Mus"

#: mouse.cpp:438
msgid "(c) 1997 - 2005 Mouse developers"
msgstr "© 1997–2005 Musutviklerne"

#: mouse.cpp:765 mouse.cpp:770
msgid ""
"_n:  pixel\n"
" pixels"
msgstr ""
"  piksel\n"
" piksler"

#: mouse.cpp:775
msgid ""
"_n:  line\n"
" lines"
msgstr ""
"  linje\n"
" linjer"

#. i18n: file kmousedlg.ui line 38
#: rc.cpp:3
#, no-c-format
msgid "Button Order"
msgstr "Knapperekkefølge"

#. i18n: file kmousedlg.ui line 89
#: rc.cpp:6
#, no-c-format
msgid "Righ&t handed"
msgstr "Høyrehend&t"

#. i18n: file kmousedlg.ui line 100
#: rc.cpp:9
#, no-c-format
msgid "Le&ft handed"
msgstr "&Venstrehendt"

#. i18n: file kmousedlg.ui line 132
#: rc.cpp:12
#, no-c-format
msgid "Re&verse scroll direction"
msgstr "Om&vendt rulleretning"

#. i18n: file kmousedlg.ui line 135
#: rc.cpp:15
#, no-c-format
msgid ""
"Change the direction of scrolling for the mouse wheel or the 4th and 5th mouse "
"buttons."
msgstr "Snu rulleretningen for musehjulet eller 4. og 5. museknapp."

#. i18n: file kmousedlg.ui line 143
#: rc.cpp:18
#, no-c-format
msgid "Icons"
msgstr "Ikoner"

#. i18n: file kmousedlg.ui line 154
#: rc.cpp:21
#, no-c-format
msgid "Dou&ble-click to open files and folders (select icons on first click)"
msgstr "Do&bbeltklikk for å åpne filer og mapper (velg ikoner på første klikk)"

#. i18n: file kmousedlg.ui line 179
#: rc.cpp:24
#, no-c-format
msgid "Visual f&eedback on activation"
msgstr "Visu&ell tilbakemelding ved start"

#. i18n: file kmousedlg.ui line 187
#: rc.cpp:27
#, no-c-format
msgid "Cha&nge pointer shape over icons"
msgstr "Endre &pekerform over ikoner"

#. i18n: file kmousedlg.ui line 198
#: rc.cpp:30
#, no-c-format
msgid "A&utomatically select icons"
msgstr "Velg ikoner a&utomatisk"

#. i18n: file kmousedlg.ui line 231
#: rc.cpp:33
#, no-c-format
msgid "Short"
msgstr "Kort"

#. i18n: file kmousedlg.ui line 273
#: rc.cpp:36
#, no-c-format
msgid "Dela&y:"
msgstr "Forsinke&lse:"

#. i18n: file kmousedlg.ui line 284
#: rc.cpp:39
#, no-c-format
msgid "Long"
msgstr "Lang"

#. i18n: file kmousedlg.ui line 316
#: rc.cpp:42
#, no-c-format
msgid "&Single-click to open files and folders"
msgstr "La &Enkeltklikk åpne filer og kataloger"

#. i18n: file logitechmouse_base.ui line 24
#: rc.cpp:45
#, no-c-format
msgid "Cordless Name"
msgstr "Navn på trådløs mus"

#. i18n: file logitechmouse_base.ui line 32
#: rc.cpp:48
#, no-c-format
msgid ""
"You have a Logitech Mouse connected, and libusb was found at compile time, but "
"it was not possible to access this mouse. This is probably caused by a "
"permissions problem - you should consult the manual on how to fix this."
msgstr ""
"Du har tilkoblet en Logitech-mus og libusb ble funnet under kompileringen, men "
"det var ikke mulig å få tilgang til denne musa. Sannsynligvis mangler du "
"tilgansgrettigheter til enheten – se i dokumentasjonen for å finne ut hvordan "
"dette kan rettes"

#. i18n: file logitechmouse_base.ui line 46
#: rc.cpp:51
#, no-c-format
msgid "Sensor Resolution"
msgstr "Sensor-oppløsning"

#. i18n: file logitechmouse_base.ui line 60
#: rc.cpp:54
#, no-c-format
msgid "400 counts per inch"
msgstr "400 ganger per tomme"

#. i18n: file logitechmouse_base.ui line 71
#: rc.cpp:57
#, no-c-format
msgid "800 counts per inch"
msgstr "800 ganger per tomme"

#. i18n: file logitechmouse_base.ui line 87
#: rc.cpp:60
#, no-c-format
msgid "Battery Level"
msgstr "Batterinivå"

#. i18n: file logitechmouse_base.ui line 111
#: rc.cpp:63
#, no-c-format
msgid "RF Channel"
msgstr "RF-kanal"

#. i18n: file logitechmouse_base.ui line 125
#: rc.cpp:66
#, no-c-format
msgid "Channel 1"
msgstr "Kanal 1"

#. i18n: file logitechmouse_base.ui line 142
#: rc.cpp:69
#, no-c-format
msgid "Channel 2"
msgstr "Kanal 2"

#: core/themepage.cpp:60
msgid "Select the cursor theme you want to use:"
msgstr "Velg det pekertemaet du vil bruke:"

#: core/themepage.cpp:66 xcursor/themepage.cpp:100
msgid "Name"
msgstr "Navn"

#: core/themepage.cpp:67 xcursor/themepage.cpp:101
msgid "Description"
msgstr "Beskrivelse"

#: core/themepage.cpp:105 xcursor/themepage.cpp:146
msgid "You have to restart TDE for these changes to take effect."
msgstr "TDE må startes på nytt for at disse endringene skal tas i bruk."

#: core/themepage.cpp:106 xcursor/themepage.cpp:147
msgid "Cursor Settings Changed"
msgstr "Pekerinnstillingene er endret."

#: core/themepage.cpp:148
msgid "Small black"
msgstr "Liten og svart"

#: core/themepage.cpp:149
msgid "Small black cursors"
msgstr "Små, svarte pekere"

#: core/themepage.cpp:153
msgid "Large black"
msgstr "Stor og svart"

#: core/themepage.cpp:154
msgid "Large black cursors"
msgstr "Store, svarte pekere"

#: core/themepage.cpp:158
msgid "Small white"
msgstr "Liten og hvit"

#: core/themepage.cpp:159
msgid "Small white cursors"
msgstr "Små, hvite pekere"

#: core/themepage.cpp:163
msgid "Large white"
msgstr "Stor og hvit"

#: core/themepage.cpp:164
msgid "Large white cursors"
msgstr "Store, hvite pekere"

#: xcursor/themepage.cpp:79
msgid "XFree theme %1 - incomplete for TDE"
msgstr ""

#: xcursor/themepage.cpp:80
msgid "No description available"
msgstr "Ingen beskrivelse er tilgjengelig"

#: xcursor/themepage.cpp:91
msgid "Select the cursor theme you want to use (hover preview to test cursor):"
msgstr ""
"Velg hvilket pekertema du vil bruke (hold musa over forhåndsvisningen for å se "
"resultatet):"

#: xcursor/themepage.cpp:111
msgid "Install New Theme..."
msgstr "Installer nytt tema …"

#: xcursor/themepage.cpp:112
msgid "Remove Theme"
msgstr "Fjern tema"

#: xcursor/themepage.cpp:219
msgid "Drag or Type Theme URL"
msgstr "Dra eller tast inn tema-nettadresse"

#: xcursor/themepage.cpp:228
#, c-format
msgid "Unable to find the cursor theme archive %1."
msgstr "Klarte ikke finne pekertema-arkivet %1."

#: xcursor/themepage.cpp:230
msgid ""
"Unable to download the cursor theme archive; please check that the address %1 "
"is correct."
msgstr ""
"Klarte ikke å laste ned pekertema-arkivet, sjekk at adressen %1 stemmer."

#: xcursor/themepage.cpp:238
msgid "The file %1 does not appear to be a valid cursor theme archive."
msgstr "Fila %1 ser ikke ut til å være et gyldig arkiv for pekertemaer."

#: xcursor/themepage.cpp:247
msgid ""
"<qt>Are you sure you want to remove the <strong>%1</strong> cursor theme?"
"<br>This will delete all the files installed by this theme.</qt>"
msgstr ""
"<qt> Er du sikker på at du vil fjerne pekertemaet <strong>%1</strong>? "
"<br> Dette vil slette alle filer som dette temaet har installert.</qt>"

#: xcursor/themepage.cpp:253
msgid "Confirmation"
msgstr "Bekreftelse"

#: xcursor/themepage.cpp:307
msgid ""
"A theme named %1 already exists in your icon theme folder. Do you want replace "
"it with this one?"
msgstr ""
"Det finnes allerede et tema som heter %1 i ikontema-mappa. Vil du erstatte det "
"med dette?"

#: xcursor/themepage.cpp:309
msgid "Overwrite Theme?"
msgstr "Vil du overskrive temaet?"

#: xcursor/themepage.cpp:544
msgid "No theme"
msgstr "Intet tema"

#: xcursor/themepage.cpp:544
msgid "The old classic X cursors"
msgstr "De klassiske X-pekerne"

#: xcursor/themepage.cpp:546
msgid "System theme"
msgstr "Systemtema"

#: xcursor/themepage.cpp:546
msgid "Do not change cursor theme"
msgstr "Ikke endre pekertemaet"