# translation of kcminput.po to Norwegian Bokmål # translation of kcminput.po to # Norwegian translations for TDE Base, kcminput # Copyright (C) 1998-2000 Hans Petter Bieker. # # Hans Petter Bieker , 1998-2000. # Knut Yrvin , 2002, 2005. # Bjørn Steensrud , 2003. # Knut Erik Hollund , 2003. # Axel Bojer , 2005, 2006. # Nils Kristian Tomren , 2005. msgid "" msgstr "" "Project-Id-Version: kcminput\n" "POT-Creation-Date: 2024-09-07 20:11+0000\n" "PO-Revision-Date: 2006-09-08 08:27+0200\n" "Last-Translator: Bjørn Steensrud \n" "Language-Team: Norwegian Bokmål \n" "Language: \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "\n" "X-Generator: KBabel 1.11.2\n" #. Instead of a literal translation, add your name to the end of the list (separated by a comma). msgid "" "_: NAME OF TRANSLATORS\n" "Your names" msgstr "Axel Bojer" #. Instead of a literal translation, add your email to the end of the list (separated by a comma). msgid "" "_: EMAIL OF TRANSLATORS\n" "Your emails" msgstr "axelb@skolelinux.no" #: core/themepage.cpp:60 msgid "Select the cursor theme you want to use:" msgstr "Velg det pekertemaet du vil bruke:" #: core/themepage.cpp:66 xcursor/themepage.cpp:100 msgid "Name" msgstr "Navn" #: core/themepage.cpp:67 xcursor/themepage.cpp:101 msgid "Description" msgstr "Beskrivelse" #: core/themepage.cpp:105 xcursor/themepage.cpp:146 msgid "You have to restart TDE for these changes to take effect." msgstr "TDE må startes på nytt for at disse endringene skal tas i bruk." #: core/themepage.cpp:106 xcursor/themepage.cpp:147 msgid "Cursor Settings Changed" msgstr "Pekerinnstillingene er endret." #: core/themepage.cpp:148 msgid "Small black" msgstr "Liten og svart" #: core/themepage.cpp:149 msgid "Small black cursors" msgstr "Små, svarte pekere" #: core/themepage.cpp:153 msgid "Large black" msgstr "Stor og svart" #: core/themepage.cpp:154 msgid "Large black cursors" msgstr "Store, svarte pekere" #: core/themepage.cpp:158 msgid "Small white" msgstr "Liten og hvit" #: core/themepage.cpp:159 msgid "Small white cursors" msgstr "Små, hvite pekere" #: core/themepage.cpp:163 msgid "Large white" msgstr "Stor og hvit" #: core/themepage.cpp:164 msgid "Large white cursors" msgstr "Store, hvite pekere" #: logitechmouse.cpp:50 logitechmouse.cpp:92 #, c-format msgid "Mouse type: %1" msgstr "Musetype: %1" #: logitechmouse.cpp:229 msgid "" "RF channel 1 has been set. Please press Connect button on mouse to re-" "establish link" msgstr "" "RF-kanal 1 er valgt. Trykk «Koble til» for å gjenopprette forbindelsen." #: logitechmouse.cpp:229 logitechmouse.cpp:233 msgid "Press Connect Button" msgstr "Trykk «Koble til»" #: logitechmouse.cpp:233 msgid "" "RF channel 2 has been set. Please press Connect button on mouse to re-" "establish link" msgstr "RF-kanal 2 er valgt. Trykk «Koble til» for å gjenopprette sambandet" #: logitechmouse.cpp:370 msgid "none" msgstr "ingen" #: logitechmouse.cpp:373 logitechmouse.cpp:403 msgid "Cordless Mouse" msgstr "Trådløs mus" #: logitechmouse.cpp:376 logitechmouse.cpp:382 logitechmouse.cpp:385 msgid "Cordless Wheel Mouse" msgstr "Trådløs hjulmus" #: logitechmouse.cpp:379 msgid "Cordless MouseMan Wheel" msgstr "Trådløs «Mouseman»-mus med rullehjul" #: logitechmouse.cpp:388 msgid "Cordless TrackMan Wheel" msgstr "Trådløs «Trackman»-mus med rullehjul" #: logitechmouse.cpp:391 msgid "TrackMan Live" msgstr "«Trackman live»-mus" #: logitechmouse.cpp:394 msgid "Cordless TrackMan FX" msgstr "Trådløs «Trackman FX»-mus" #: logitechmouse.cpp:397 msgid "Cordless MouseMan Optical" msgstr "Optisk trådløs «Mouseman»-mus" #: logitechmouse.cpp:400 msgid "Cordless Optical Mouse" msgstr "Trådløs optisk mus" #: logitechmouse.cpp:406 msgid "Cordless MouseMan Optical (2ch)" msgstr "Trådløs optisk «Mouseman»-mus (2 kanaler)" #: logitechmouse.cpp:409 msgid "Cordless Optical Mouse (2ch)" msgstr "Trådløs optisk mus (2 kanaler)" #: logitechmouse.cpp:412 msgid "Cordless Mouse (2ch)" msgstr "Trådløs mus (2 kanaler)" #: logitechmouse.cpp:415 msgid "Cordless Optical TrackMan" msgstr "Trådløs optisk «Trackman»-mus" #: logitechmouse.cpp:418 msgid "MX700 Cordless Optical Mouse" msgstr "Trådløs optisk «MX700»-mus" #: logitechmouse.cpp:421 msgid "MX700 Cordless Optical Mouse (2ch)" msgstr "Trådløs optisk «MX700»-mus (2 kanaler)" #: logitechmouse.cpp:424 msgid "Unknown mouse" msgstr "Ukjent mus" #: mouse.cpp:84 msgid "" "

Mouse

This module allows you to choose various options for the way " "in which your pointing device works. Your pointing device may be a mouse, " "trackball, or some other hardware that performs a similar function." msgstr "" "

Mus

Med denne modulen kan du velge hvordan pekeredskapet skal virke. " "Istedenfor mus har du kanskje en styrekule " "eller annet utstyr som utfører en lignende funksjon." #: mouse.cpp:103 msgid "&General" msgstr "&Generelt" #: mouse.cpp:108 msgid "" "If you are left-handed, you may prefer to swap the functions of the left and " "right buttons on your pointing device by choosing the 'left-handed' option. " "If your pointing device has more than two buttons, only those that function " "as the left and right buttons are affected. For example, if you have a three-" "button mouse, the middle button is unaffected." msgstr "" "Hvis du er venstrehendt, så kanskje du foretrekker å bytte funksjonene til " "venstre og høyre knapp på pekeredskapet ditt ved å velge «venstrehendt». " "Hvis pekeredskapet ditt har mer enn to knapper vil bare funksjonene på " "venstre og høyre knapp bli påvirket. F.eks. vil den midterste knappen på en " "treknappers mus forbli uendret." #: mouse.cpp:118 msgid "" "The default behavior in TDE is to select and activate icons with a single " "click of the left button on your pointing device. This behavior is " "consistent with what you would expect when you click links in most web " "browsers. If you would prefer to select with a single click, and activate " "with a double click, check this option." msgstr "" "Standard i TDE er å velge og starte ikoner med et enkelt klikk med venstre " "museknapp. Slik er det også i de fleste nettleserne. Hvis du foretrekker å " "velge med et enkeltklikk og heller starte med et dobbeltklikk, så ikke kryss " "av for dette valget." #: mouse.cpp:126 msgid "Activates and opens a file or folder with a single click." msgstr "Starter og åpner en fil eller mappe med et enkelt trykk." #: mouse.cpp:132 msgid "" "If you check this option, pausing the mouse pointer over an icon on the " "screen will automatically select that icon. This may be useful when single " "clicks activate icons, and you want only to select the icon without " "activating it." msgstr "" "Hvis dette valget er avkrysset, vil ikonet automatisk bli valgt hvis du " "holder musepekeren over ikonet. Dette kan være nyttig hvis enkeltklikk " "starter ikoner og du ønsker å merke ikoner uten å starte programmet." #: mouse.cpp:144 msgid "" "If you have checked the option to automatically select icons, this slider " "allows you to select how long the mouse pointer must be paused over the icon " "before it is selected." msgstr "" "Hvis du har krysset av for automatisk å velge ikoner, vil dette feltet gi " "deg mulighet til å bestemme hvor lenge du må holde musa over et ikon før det " "blir valgt." #: mouse.cpp:149 msgid "Show feedback when clicking an icon" msgstr "Vis tilbakemelding når et ikon blir valgt" #: mouse.cpp:179 msgid "&Cursor Theme" msgstr "&Pekertema" #: mouse.cpp:183 msgid "Advanced" msgstr "Avansert" #: mouse.cpp:189 msgid "Pointer acceleration:" msgstr "Pekerakselerasjon:" #: mouse.cpp:194 msgid "" "This option allows you to change the relationship between the distance that " "the mouse pointer moves on the screen and the relative movement of the " "physical device itself (which may be a mouse, trackball, or some other " "pointing device.)

A high value for the acceleration will lead to large " "movements of the mouse pointer on the screen even when you only make a small " "movement with the physical device. Selecting very high values may result in " "the mouse pointer flying across the screen, making it hard to control." msgstr "" "Dette valget gir deg mulighet til å endre sammenhengen mellom avstanden " "musepekeren flyttes på skjermen og den fysiske enheten (som kan være en mus, " "styrekule eller et annet pekeredskap).

En høy akselerasjonsverdi vil føre " "til at musepekeren flytter seg langt selv om du bare gjør små bevegelser med " "musa. Hvis du velger veldig høye verdier kan det føre til at musepekeren " "flyr over skjermen og gjør det vanskelig å styre den." #: mouse.cpp:207 msgid "Pointer threshold:" msgstr "Pekerterskel:" #: mouse.cpp:215 msgid "" "The threshold is the smallest distance that the mouse pointer must move on " "the screen before acceleration has any effect. If the movement is smaller " "than the threshold, the mouse pointer moves as if the acceleration was set " "to 1X;

thus, when you make small movements with the physical device, " "there is no acceleration at all, giving you a greater degree of control over " "the mouse pointer. With larger movements of the physical device, you can " "move the mouse pointer rapidly to different areas on the screen." msgstr "" "Terskelen er den minste avstanden musepekeren må flyttes på skjermen før " "akselerasjon trer i kraft. Hvis den blir flyttet en kortere avstand enn " "terskelen, vil pekeren flytte seg som om akselerasjonen var satt til 1X." "

Det betyr at det ikke vil skje noe hvis du flytter musa veldig lite. " "Dette gir stor kontroll over musepekeren. Med større bevegelser kan du raskt " "flytte pekeren til andre deler av skjermen." #: mouse.cpp:227 msgid "Double click interval:" msgstr "Dobbeltklikkintervall:" #: mouse.cpp:229 mouse.cpp:278 mouse.cpp:332 mouse.cpp:340 mouse.cpp:349 msgid " msec" msgstr " ms" #: mouse.cpp:234 msgid "" "The double click interval is the maximal time (in milliseconds) between two " "mouse clicks which turns them into a double click. If the second click " "happens later than this time interval after the first click, they are " "recognized as two separate clicks." msgstr "" "Dobbeltklikkintervall er den lengste tiden (i millisekunder) mellom to " "museklikk som gjør dem til et dobbeltklikk. Hvis det andre klikket skjer " "etter dette tidspunktet, vil de bli oppfattet som to enkeltklikk." #: mouse.cpp:244 msgid "Double-click on the image below to test your double-click interval:" msgstr "" #: mouse.cpp:246 msgid "" "

The image will change when your double-click test time is less than or " "equal to the interval you configured. For example, if you configure a double-" "click interval of 700 milliseconds the image will not change when the time " "between two successive clicks on the image is 800 milliseconds, but the " "image will change when the time between clicks is 600 milliseconds. The goal " "is to select a comfortable interval that you find is not too fast or slow.

When changing the interval it is not necessary to push the Apply button before testing.

" msgstr "" #: mouse.cpp:276 msgid "Drag start time:" msgstr "Starttid for draoperasjoner:" #: mouse.cpp:283 msgid "" "If you click with the mouse (e.g. in a multi-line editor) and begin to move " "the mouse within the drag start time, a drag operation will be initiated." msgstr "" "Hvis du klikker med en museknapp (f.eks. i et skriveprogram med flere " "linjer) og begynner å flytte musa før starttiden er over, så vil en " "draoperasjon settes i gang." #: mouse.cpp:289 msgid "Drag start distance:" msgstr "Startavstand for draoperasjon:" #: mouse.cpp:297 msgid "" "If you click with the mouse and begin to move the mouse at least the drag " "start distance, a drag operation will be initiated." msgstr "" "Hvis du klikker med musepekeren og drar musa mer enn startavstanden, settes " "en draoperasjon i gang." #: mouse.cpp:303 msgid "Mouse wheel scrolls by:" msgstr "Musehjulet ruller med:" #: mouse.cpp:311 msgid "" "If you use the wheel of a mouse, this value determines the number of lines " "to scroll for each wheel movement. Note that if this number exceeds the " "number of visible lines, it will be ignored and the wheel movement will be " "handled as a page up/down movement." msgstr "" "Hvis du bruker en mus med rullehjul, kan du her velge hvor mange linjer " "teksten skal flytte seg når du ruller på hjulet. Legg merke til at dersom " "dette tallet er større enn antall synlige linjer, så blir teksten i stedet " "bare flyttet en side fram eller tilbake." #: mouse.cpp:317 msgid "Mouse Navigation" msgstr "Musenavigering" #: mouse.cpp:325 msgid "&Move pointer with keyboard (using the num pad)" msgstr "Flytt &musepekeren med det numeriske tastaturet" #: mouse.cpp:331 msgid "&Acceleration delay:" msgstr "&Akselerasjonsforsinkelse:" #: mouse.cpp:339 msgid "R&epeat interval:" msgstr "R&epetisjonsintervall:" #: mouse.cpp:347 msgid "Acceleration &time:" msgstr "Akselerasjons&tid:" #: mouse.cpp:355 msgid "Ma&ximum speed:" msgstr "&Høyeste fart:" #: mouse.cpp:357 msgid " pixel/sec" msgstr " piksler/sek" #: mouse.cpp:363 msgid "Acceleration &profile:" msgstr "Akselerasjons&profil:" #: mouse.cpp:436 msgid "Mouse" msgstr "Mus" #: mouse.cpp:437 msgid "(c) 1997 - 2005 Mouse developers" msgstr "© 1997–2005 Musutviklerne" #: mouse.cpp:769 mouse.cpp:774 msgid "" "_n: pixel\n" " pixels" msgstr "" " piksel\n" " piksler" #: mouse.cpp:779 msgid "" "_n: line\n" " lines" msgstr "" " linje\n" " linjer" #: syndaemon.cpp:186 syndaemon.cpp:187 msgid "Synaptics helper daemon" msgstr "" #: syndaemon.cpp:190 syndaemon.cpp:191 msgid "Author" msgstr "" #: touchpad.cpp:63 msgid "" "

Touchpad not found

Please check your system installation." msgstr "" #: touchpad.cpp:71 msgid "" "

Unsupported driver

This module only supports the following " "drivers:

Libinput, Synaptics" msgstr "" #: touchpad.cpp:77 msgid "

Unknown error

" msgstr "" #: touchpad.cpp:94 msgid "Touchpad" msgstr "" #: touchpad.cpp:97 msgid "(c) 2024 Mavridis Philippe" msgstr "" #: touchpad.cpp:122 msgid "Enable touchpad" msgstr "" #: touchpad.cpp:124 msgid "This option determines whether the touchpad is enabled or disabled" msgstr "" #: touchpad.cpp:143 msgid "Behaviour" msgstr "" #: touchpad.cpp:145 msgid "Disable touchpad while typing" msgstr "" #: touchpad.cpp:147 msgid "" "If this option is checked, the touchpad is disabled while you are typing, so " "as to prevent accidental cursor movement and clicks." msgstr "" #: touchpad.cpp:152 msgid "Middle button emulation" msgstr "" #: touchpad.cpp:154 msgid "" "If this option is enabled, a simultaneous left and right button click is " "automatically transformed into a middle button click." msgstr "" #: touchpad.cpp:167 msgid "Speed" msgstr "" #: touchpad.cpp:169 #, fuzzy msgid "Acceleration:" msgstr "Akselerasjons&tid:" #: touchpad.cpp:178 msgid "Slower" msgstr "" #: touchpad.cpp:180 msgid "Normal" msgstr "" #: touchpad.cpp:182 msgid "Faster" msgstr "" #: touchpad.cpp:186 msgid "Use adaptive profile" msgstr "" #: touchpad.cpp:206 msgid "Tapping" msgstr "" #: touchpad.cpp:208 msgid "Tap to click" msgstr "" #: touchpad.cpp:210 msgid "" "If this option is checked, a tap on the touchpad is interpreted as a button " "click." msgstr "" #: touchpad.cpp:215 msgid "Tap-and-drag" msgstr "" #: touchpad.cpp:217 msgid "" "Tap-and-drag is a tap which is immediately followed by a finger down and " "that finger being held down emulates a button press. Moving the finger " "around can thus drag the selected item on the screen." msgstr "" #: touchpad.cpp:224 msgid "Tap-and-drag lock" msgstr "" #: touchpad.cpp:226 msgid "" "When enabled, lifting a finger while dragging will not immediately stop " "dragging." msgstr "" #: touchpad.cpp:238 msgid "Two-finger tap:" msgstr "" #: touchpad.cpp:243 msgid "Right click (three-finger tap for middle click)" msgstr "" #: touchpad.cpp:247 msgid "Middle click (three-finger tap for right click)" msgstr "" #: touchpad.cpp:252 msgid "Scrolling options" msgstr "" #: touchpad.cpp:254 msgid "Vertical scrolling" msgstr "" #: touchpad.cpp:256 msgid "" "This option enables/disables the vertical scrolling gesture on the touchpad. " "(The actual gesture depends on the selected scroll method.) Unless the used " "driver is Synaptics, disabling vertical scrolling also disables horizontal " "scrolling." msgstr "" #: touchpad.cpp:264 msgid "Horizontal scrolling" msgstr "" #: touchpad.cpp:266 msgid "" "This option enables/disables the horizontal scrolling gesture on the " "touchpad. (The actual gesture depends on the selected scroll method.)" msgstr "" #: touchpad.cpp:272 #, fuzzy msgid "Reverse scroll direction" msgstr "Om&vendt rulleretning" #: touchpad.cpp:274 msgid "" "If this option is checked, the scrolling direction is reversed to resemble " "natural movement of content. This feature is also called natural scrolling." msgstr "" #: touchpad.cpp:281 msgid "" "This option allows you to select the scrolling directions to which reversed " "scrolling will be applied. It is only available if the Synaptics driver is " "used." msgstr "" #: touchpad.cpp:285 msgid "Apply to horizontal scrolling" msgstr "" #: touchpad.cpp:286 msgid "Apply to vertical scrolling" msgstr "" #: touchpad.cpp:309 msgid "Scrolling method" msgstr "" #: touchpad.cpp:311 msgid "" "Here you can select your preferred scrolling method. The two most common " "options are two-finger scrolling and edge scrolling. Two-finger scrolling " "entails a movement with two fingers vertically or horizontally upon the " "surface of the touchpad. Edge scrolling on the other hand tracks movements " "with one finger along the right or bottom edge of the touchpad." msgstr "" #: touchpad.cpp:320 msgid "Two-finger" msgstr "" #: touchpad.cpp:321 msgid "Edge" msgstr "" #: touchpad.cpp:325 #, fuzzy msgid "Button" msgstr "Knapperekkefølge" #: touchpad.cpp:349 msgid "Warning: The Synaptics driver has been deprecated." msgstr "" #: touchpad.cpp:352 msgid "" "

The Synaptics driver is no longer in active development.

While Libinput is the preferred choice for handling input devices, you " "might still have valid reasons to use the older Synaptics driver in its " "place. Please bear in mind that you will probably not receive updates and " "bug fixes from its upstream." msgstr "" #: xcursor/themepage.cpp:79 msgid "XFree theme %1 - incomplete for TDE" msgstr "" #: xcursor/themepage.cpp:80 msgid "No description available" msgstr "Ingen beskrivelse er tilgjengelig" #: xcursor/themepage.cpp:91 msgid "Select the cursor theme you want to use (hover preview to test cursor):" msgstr "" "Velg hvilket pekertema du vil bruke (hold musa over forhåndsvisningen for å " "se resultatet):" #: xcursor/themepage.cpp:111 msgid "Install New Theme..." msgstr "Installer nytt tema …" #: xcursor/themepage.cpp:112 msgid "Remove Theme" msgstr "Fjern tema" #: xcursor/themepage.cpp:219 msgid "Drag or Type Theme URL" msgstr "Dra eller tast inn tema-nettadresse" #: xcursor/themepage.cpp:228 #, c-format msgid "Unable to find the cursor theme archive %1." msgstr "Klarte ikke finne pekertema-arkivet %1." #: xcursor/themepage.cpp:230 msgid "" "Unable to download the cursor theme archive; please check that the address " "%1 is correct." msgstr "" "Klarte ikke å laste ned pekertema-arkivet, sjekk at adressen %1 stemmer." #: xcursor/themepage.cpp:238 msgid "The file %1 does not appear to be a valid cursor theme archive." msgstr "Fila %1 ser ikke ut til å være et gyldig arkiv for pekertemaer." #: xcursor/themepage.cpp:247 msgid "" "Are you sure you want to remove the %1 cursor theme?" "
This will delete all the files installed by this theme." msgstr "" " Er du sikker på at du vil fjerne pekertemaet %1?
" "Dette vil slette alle filer som dette temaet har installert." #: xcursor/themepage.cpp:253 msgid "Confirmation" msgstr "Bekreftelse" #: xcursor/themepage.cpp:307 msgid "" "A theme named %1 already exists in your icon theme folder. Do you want " "replace it with this one?" msgstr "" "Det finnes allerede et tema som heter %1 i ikontema-mappa. Vil du erstatte " "det med dette?" #: xcursor/themepage.cpp:309 msgid "Overwrite Theme?" msgstr "Vil du overskrive temaet?" #: xcursor/themepage.cpp:544 msgid "No theme" msgstr "Intet tema" #: xcursor/themepage.cpp:544 msgid "The old classic X cursors" msgstr "De klassiske X-pekerne" #: xcursor/themepage.cpp:546 msgid "System theme" msgstr "Systemtema" #: xcursor/themepage.cpp:546 msgid "Do not change cursor theme" msgstr "Ikke endre pekertemaet" #: kmousedlg.ui:16 #, fuzzy, no-c-format msgid "KMouseDlg" msgstr "Mus" #: kmousedlg.ui:41 #, no-c-format msgid "Button Order" msgstr "Knapperekkefølge" #: kmousedlg.ui:92 #, no-c-format msgid "Righ&t handed" msgstr "Høyrehend&t" #: kmousedlg.ui:103 #, no-c-format msgid "Le&ft handed" msgstr "&Venstrehendt" #: kmousedlg.ui:135 #, no-c-format msgid "Re&verse scroll direction" msgstr "Om&vendt rulleretning" #: kmousedlg.ui:138 #, fuzzy, no-c-format msgid "Change the direction of scrolling for the mouse wheel, if present." msgstr "Snu rulleretningen for musehjulet eller 4. og 5. museknapp." #: kmousedlg.ui:146 #, no-c-format msgid "Swap &history navigation buttons" msgstr "" #: kmousedlg.ui:149 #, fuzzy, no-c-format msgid "Swap the two history navigation buttons on the mouse, if present." msgstr "Snu rulleretningen for musehjulet eller 4. og 5. museknapp." #: kmousedlg.ui:157 #, no-c-format msgid "Icons" msgstr "Ikoner" #: kmousedlg.ui:168 #, no-c-format msgid "Dou&ble-click to open files and folders (select icons on first click)" msgstr "Do&bbeltklikk for å åpne filer og mapper (velg ikoner på første klikk)" #: kmousedlg.ui:193 #, no-c-format msgid "Visual f&eedback on activation" msgstr "Visu&ell tilbakemelding ved start" #: kmousedlg.ui:201 #, no-c-format msgid "Cha&nge pointer shape over icons" msgstr "Endre &pekerform over ikoner" #: kmousedlg.ui:212 #, no-c-format msgid "A&utomatically select icons" msgstr "Velg ikoner a&utomatisk" #: kmousedlg.ui:245 #, no-c-format msgid "Short" msgstr "Kort" #: kmousedlg.ui:287 #, no-c-format msgid "Dela&y:" msgstr "Forsinke&lse:" #: kmousedlg.ui:298 #, no-c-format msgid "Long" msgstr "Lang" #: kmousedlg.ui:330 #, no-c-format msgid "&Single-click to open files and folders" msgstr "La &Enkeltklikk åpne filer og kataloger" #: logitechmouse_base.ui:24 #, no-c-format msgid "Cordless Name" msgstr "Navn på trådløs mus" #: logitechmouse_base.ui:32 #, no-c-format msgid "" "You have a Logitech Mouse connected, and libusb was found at compile time, " "but it was not possible to access this mouse. This is probably caused by a " "permissions problem - you should consult the manual on how to fix this." msgstr "" "Du har tilkoblet en Logitech-mus og libusb ble funnet under kompileringen, " "men det var ikke mulig å få tilgang til denne musa. Sannsynligvis mangler du " "tilgansgrettigheter til enheten – se i dokumentasjonen for å finne ut " "hvordan dette kan rettes" #: logitechmouse_base.ui:46 #, no-c-format msgid "Sensor Resolution" msgstr "Sensor-oppløsning" #: logitechmouse_base.ui:60 #, no-c-format msgid "400 counts per inch" msgstr "400 ganger per tomme" #: logitechmouse_base.ui:71 #, no-c-format msgid "800 counts per inch" msgstr "800 ganger per tomme" #: logitechmouse_base.ui:87 #, no-c-format msgid "Battery Level" msgstr "Batterinivå" #: logitechmouse_base.ui:111 #, no-c-format msgid "RF Channel" msgstr "RF-kanal" #: logitechmouse_base.ui:125 #, no-c-format msgid "Channel 1" msgstr "Kanal 1" #: logitechmouse_base.ui:142 #, no-c-format msgid "Channel 2" msgstr "Kanal 2" #~ msgid "" #~ "Change the direction of scrolling for the mouse wheel or the 4th and 5th " #~ "mouse buttons." #~ msgstr "Snu rulleretningen for musehjulet eller 4. og 5. museknapp." #, fuzzy #~| msgid "" #~| "Change the direction of scrolling for the mouse wheel or the 4th and 5th " #~| "mouse buttons." #~ msgid "" #~ "Swap the two history navigation buttons on the mouse (8th and 9th mouse " #~ "button)." #~ msgstr "Snu rulleretningen for musehjulet eller 4. og 5. museknapp."