# translation of cupsdconf.po to Siswati # Copyright (C) 2002 Free Software Foundation, Inc. # Adam Mathebula , 2002 # msgid "" msgstr "" "Project-Id-Version: cupsdconf\n" "POT-Creation-Date: 2019-01-13 18:46+0100\n" "PO-Revision-Date: 2002-11-15 06:02+0200\n" "Last-Translator: Adam Mathebula \n" "Language-Team: Siswati \n" "Language: ss\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 1.0beta2\n" #: _translatorinfo:1 msgid "" "_: NAME OF TRANSLATORS\n" "Your names" msgstr "" #: _translatorinfo:2 msgid "" "_: EMAIL OF TRANSLATORS\n" "Your emails" msgstr "" #: addressdialog.cpp:30 #, fuzzy msgid "ACL Address" msgstr "Likheli:" #: addressdialog.cpp:36 browsedialog.cpp:42 #, fuzzy msgid "Allow" msgstr "Vumela ,yalela" #: addressdialog.cpp:37 browsedialog.cpp:43 msgid "Deny" msgstr "" #: addressdialog.cpp:39 browsedialog.cpp:47 msgid "Type:" msgstr "" #: addressdialog.cpp:40 portdialog.cpp:43 msgid "Address:" msgstr "Likheli:" #: browsedialog.cpp:41 msgid "Send" msgstr "" #: browsedialog.cpp:44 msgid "Relay" msgstr "" #: browsedialog.cpp:45 msgid "Poll" msgstr "" #: browsedialog.cpp:48 msgid "From:" msgstr "" #: browsedialog.cpp:49 msgid "To:" msgstr "" #: browsedialog.cpp:62 #, fuzzy msgid "Browse Address" msgstr "Likheli:" #: cupsdbrowsingpage.cpp:37 msgid "Browsing" msgstr "Kubrawuza" #: cupsdbrowsingpage.cpp:38 #, fuzzy msgid "Browsing Settings" msgstr "Kuhleleka kwekubrawuza" #: cupsdbrowsingpage.cpp:44 msgid "Use browsing" msgstr "Sebentisa kubrawuza" #: cupsdbrowsingpage.cpp:49 msgid "Implicit classes" msgstr "Emaklilasi langabonakali" #: cupsdbrowsingpage.cpp:50 msgid "Hide implicit members" msgstr "" #: cupsdbrowsingpage.cpp:51 msgid "Use short names" msgstr "Sebentisa emagama lamafushane" #: cupsdbrowsingpage.cpp:52 msgid "Use \"any\" classes" msgstr "Sebentisa \"any\" emaklilasi" #: cupsdbrowsingpage.cpp:54 locationdialog.cpp:66 msgid "Allow, Deny" msgstr "Vumela ,yalela" #: cupsdbrowsingpage.cpp:55 locationdialog.cpp:67 msgid "Deny, Allow" msgstr "Yalela,Vumela" #: cupsdbrowsingpage.cpp:61 cupsdbrowsingpage.cpp:64 cupsdnetworkpage.cpp:53 #: cupsdnetworkpage.cpp:61 msgid " sec" msgstr " sec" #: cupsdbrowsingpage.cpp:66 msgid "Browse port:" msgstr "Brawuza sikhungo:" #: cupsdbrowsingpage.cpp:67 #, fuzzy msgid "Browse interval:" msgstr "Brawuza sikhungo:" #: cupsdbrowsingpage.cpp:68 #, fuzzy msgid "Browse timeout:" msgstr "Brawuza sikhungo:" #: cupsdbrowsingpage.cpp:69 #, fuzzy msgid "Browse addresses:" msgstr "Brawuza sikhungo:" #: cupsdbrowsingpage.cpp:70 #, fuzzy msgid "Browse order:" msgstr "Brawuza sikhungo:" #: cupsdbrowsingpage.cpp:71 #, fuzzy msgid "Browse options:" msgstr "Brawuza sikhungo:" #: cupsdconf.cpp:847 cupsdconf.cpp:870 cupsdconf.cpp:886 msgid "" "_: Base\n" "Root" msgstr "Imphandze" #: cupsdconf.cpp:847 cupsdconf.cpp:867 cupsdconf.cpp:888 msgid "All printers" msgstr "Tonkhe tishiceleli" #: cupsdconf.cpp:847 cupsdconf.cpp:868 cupsdconf.cpp:889 msgid "All classes" msgstr "Wonkhe emaklilasi" #: cupsdconf.cpp:847 cupsdconf.cpp:869 cupsdconf.cpp:891 msgid "Print jobs" msgstr "Shicelela umsebenti" #: cupsdconf.cpp:848 cupsdconf.cpp:866 cupsdconf.cpp:887 msgid "Administration" msgstr "Sicondzisi" #: cupsdconf.cpp:849 cupsdconf.cpp:876 cupsdconf.cpp:879 cupsdconf.cpp:900 msgid "Class" msgstr "Liklilasi" #: cupsdconf.cpp:850 cupsdconf.cpp:871 cupsdconf.cpp:874 cupsdconf.cpp:894 msgid "Printer" msgstr "Sishiceleli" #: cupsdconf.cpp:890 msgid "Root" msgstr "Imphadzi" #: cupsddialog.cpp:128 msgid "Short Help" msgstr "Kusita lokumfushane" #: cupsddialog.cpp:141 msgid "CUPS Server Configuration" msgstr "Kuhleleka kwesigcini seCUPS" #: cupsddialog.cpp:188 msgid "Error while loading configuration file!" msgstr "Liphutsa kusalayishwa kuhleleka kwelifayela!" #: cupsddialog.cpp:188 cupsddialog.cpp:207 cupsddialog.cpp:268 #: cupsddialog.cpp:323 msgid "CUPS Configuration Error" msgstr "Liphutsa lekuhleleka kwe CUPS" #: cupsddialog.cpp:197 msgid "" "Some options were not recognized by this configuration tool. They will be " "left untouched and you won't be able to change them." msgstr "" "Lokunye kwenta akuzange kwatiwe lithulusi lekuhlela. Kutakuyekelwa " "kungakatsindvwa futsi ngeke ukhone kukutjintja." #: cupsddialog.cpp:199 msgid "Unrecognized Options" msgstr "Kwenta ngalenye indlela lokungatiwa" #: cupsddialog.cpp:219 msgid "Unable to find a running CUPS server" msgstr "" #: cupsddialog.cpp:228 msgid "Unable to restart CUPS server (pid = %1)" msgstr "" #: cupsddialog.cpp:249 msgid "" "Unable to retrieve configuration file from the CUPS server. You probably " "don't have the access permissions to perform this operation." msgstr "" #: cupsddialog.cpp:259 msgid "Internal error: file '%1' not readable/writable!" msgstr " Liphutsa langekhatsi: lifayela '%1' kalifundzeki/kalibhaleki!" #: cupsddialog.cpp:262 msgid "Internal error: empty file '%1'!" msgstr "Liphutsa langekhatsi: lifayela lelingenaluutfo '%1'!" #: cupsddialog.cpp:280 msgid "" "The config file has not been uploaded to the CUPS server. The daemon will " "not be restarted." msgstr "" #: cupsddialog.cpp:284 msgid "" "Unable to upload the configuration file to CUPS server. You probably don't " "have the access permissions to perform this operation." msgstr "" #: cupsddialog.cpp:287 msgid "CUPS configuration error" msgstr "Liphutsa lekuhlela i-CUPS" #: cupsddialog.cpp:318 #, c-format msgid "Unable to write configuration file %1" msgstr "Akukhonakali kubhala kuhleleka kwelifayela %1" #: cupsddirpage.cpp:34 #, fuzzy msgid "Folders" msgstr "Sisefo" #: cupsddirpage.cpp:35 #, fuzzy msgid "Folders Settings" msgstr "Kuhleleka kwesisefo" #: cupsddirpage.cpp:46 #, fuzzy msgid "Data folder:" msgstr "Idirectory yeminingwane lengakahlutwa:" #: cupsddirpage.cpp:47 #, fuzzy msgid "Document folder:" msgstr "Idirectory yelidokhumente:" #: cupsddirpage.cpp:48 msgid "Font path:" msgstr "" #: cupsddirpage.cpp:49 #, fuzzy msgid "Request folder:" msgstr "Idirectory yesicelo:" #: cupsddirpage.cpp:50 #, fuzzy msgid "Server binaries:" msgstr "Ligama lesigcini:" #: cupsddirpage.cpp:51 msgid "Server files:" msgstr "Emafayela yesigcini:" #: cupsddirpage.cpp:52 msgid "Temporary files:" msgstr "Emafayela yesikhashane:" #: cupsdfilterpage.cpp:36 msgid "Filter" msgstr "Sisefo" #: cupsdfilterpage.cpp:37 #, fuzzy msgid "Filter Settings" msgstr "Kuhleleka kwesisefo" #: cupsdfilterpage.cpp:46 cupsdjobspage.cpp:47 cupsdjobspage.cpp:49 #: cupsdjobspage.cpp:52 cupsdnetworkpage.cpp:52 cupsdnetworkpage.cpp:60 #: sizewidget.cpp:39 msgid "Unlimited" msgstr "Ngagcini" #: cupsdfilterpage.cpp:49 msgid "User:" msgstr "Umsebentisi:" #: cupsdfilterpage.cpp:50 msgid "Group:" msgstr "Licembu:" #: cupsdfilterpage.cpp:51 msgid "RIP cache:" msgstr "Silulu se RIP:" #: cupsdfilterpage.cpp:52 msgid "Filter limit:" msgstr "Sigcinose sisefo " #: cupsdjobspage.cpp:34 msgid "Jobs" msgstr "Imisebenti" #: cupsdjobspage.cpp:35 #, fuzzy msgid "Print Jobs Settings" msgstr "Shicelela kuhleleka kwemisebenti" #: cupsdjobspage.cpp:38 msgid "Preserve job history" msgstr "Gcina umlandvo wemsebenti" #: cupsdjobspage.cpp:39 msgid "Preserve job files" msgstr "Gcina emafayela yemsebenti" #: cupsdjobspage.cpp:40 msgid "Auto purge jobs" msgstr "" #: cupsdjobspage.cpp:55 msgid "Max jobs:" msgstr "Sigcini semisebenti :" #: cupsdjobspage.cpp:56 msgid "Max jobs per printer:" msgstr "Sigcino semisebenti ngasinye sishiceleli:" #: cupsdjobspage.cpp:57 msgid "Max jobs per user:" msgstr "Sigcino semisebentingamsebentisi ngamunyea:" #: cupsdlogpage.cpp:36 msgid "Log" msgstr "" #: cupsdlogpage.cpp:37 #, fuzzy msgid "Log Settings" msgstr "Kuhleleka kwekubrawuza" #: cupsdlogpage.cpp:46 msgid "Detailed Debugging" msgstr "" #: cupsdlogpage.cpp:47 #, fuzzy msgid "Debug Information" msgstr "umniningwane lovamile" #: cupsdlogpage.cpp:48 msgid "General Information" msgstr "umniningwane lovamile" #: cupsdlogpage.cpp:49 msgid "Warnings" msgstr "Tecwayiso" #: cupsdlogpage.cpp:50 msgid "Errors" msgstr "Emaphutsa" #: cupsdlogpage.cpp:51 msgid "No Logging" msgstr "" #: cupsdlogpage.cpp:58 msgid "Access log:" msgstr "" #: cupsdlogpage.cpp:59 #, fuzzy msgid "Error log:" msgstr "Emaphutsa" #: cupsdlogpage.cpp:60 msgid "Page log:" msgstr "" #: cupsdlogpage.cpp:61 #, fuzzy msgid "Max log size:" msgstr "Sigcini semisebenti :" #: cupsdlogpage.cpp:62 msgid "Log level:" msgstr "" #: cupsdnetworkpage.cpp:38 msgid "Network" msgstr "Luchungechunge" #: cupsdnetworkpage.cpp:39 #, fuzzy msgid "Network Settings" msgstr "Kuhleleka kweluchungechunge" #: cupsdnetworkpage.cpp:42 msgid "Keep alive" msgstr "Gcina kuphila" #: cupsdnetworkpage.cpp:65 msgid "Double" msgstr "" #: cupsdnetworkpage.cpp:67 msgid "Hostname lookups:" msgstr "" #: cupsdnetworkpage.cpp:68 #, fuzzy msgid "Keep-alive timeout:" msgstr "Gcina kuphila" #: cupsdnetworkpage.cpp:69 msgid "Max clients:" msgstr "" #: cupsdnetworkpage.cpp:70 msgid "Max request size:" msgstr "" #: cupsdnetworkpage.cpp:71 msgid "Client timeout:" msgstr "" #: cupsdnetworkpage.cpp:72 msgid "Listen to:" msgstr "Lalela ku:" #: cupsdsecuritypage.cpp:38 #, fuzzy msgid "Security" msgstr "Imfihlo" #: cupsdsecuritypage.cpp:39 #, fuzzy msgid "Security Settings" msgstr "Kuhleleka kwesigcini" #: cupsdsecuritypage.cpp:49 msgid "Remote root user:" msgstr "" #: cupsdsecuritypage.cpp:50 msgid "System group:" msgstr "" #: cupsdsecuritypage.cpp:51 msgid "Encryption certificate:" msgstr "" #: cupsdsecuritypage.cpp:52 msgid "Encryption key:" msgstr "" #: cupsdsecuritypage.cpp:53 msgid "Locations:" msgstr "" #: cupsdsecuritypage.cpp:128 msgid "" "This location is already defined. Do you want to replace the existing one?" msgstr "" #: cupsdserverpage.cpp:43 msgid "Server" msgstr "Sigcini" #: cupsdserverpage.cpp:44 #, fuzzy msgid "Server Settings" msgstr "Kuhleleka kwesigcini" #: cupsdserverpage.cpp:55 msgid "Allow overrides" msgstr "Vumela kwephulwa kwemtsetfo" #: cupsdserverpage.cpp:57 locationdialog.cpp:49 locationdialog.cpp:53 msgid "None" msgstr "Kute" #: cupsdserverpage.cpp:58 msgid "Classified" msgstr "Lokuhleliwe" #: cupsdserverpage.cpp:59 msgid "Confidential" msgstr "Yimfihlo" #: cupsdserverpage.cpp:60 msgid "Secret" msgstr "Imfihlo" #: cupsdserverpage.cpp:61 msgid "Top Secret" msgstr "Imfihlo lesetulu" #: cupsdserverpage.cpp:62 msgid "Unclassified" msgstr "Ngahlelwanga" #: cupsdserverpage.cpp:63 msgid "Other" msgstr "Lokunye" #: cupsdserverpage.cpp:83 msgid "Server name:" msgstr "Ligama lesigcini:" #: cupsdserverpage.cpp:84 msgid "Server administrator:" msgstr "Silawuli sesigcini:" #: cupsdserverpage.cpp:85 msgid "Classification:" msgstr "Kuhlelwa:" #: cupsdserverpage.cpp:86 msgid "Default character set:" msgstr "Kuhlelwa kwetinhlamvu telizinga:" #: cupsdserverpage.cpp:87 msgid "Default language:" msgstr "Lizinga lelulwimi: " #: cupsdserverpage.cpp:88 msgid "Printcap file:" msgstr "" #: cupsdserverpage.cpp:89 msgid "Printcap format:" msgstr "" #: cupsdsplash.cpp:31 #, fuzzy msgid "Welcome to the CUPS Server Configuration Tool" msgstr "Uyemukelwa ethulusini lekuhlela sigcini se CUPS" #: cupsdsplash.cpp:32 msgid "Welcome" msgstr "Uyemukelwa" #: cupsdsplash.cpp:49 msgid "" "

This tool will help you to configure graphically the server of the CUPS " "printing system. The available options are grouped into sets of related " "topics and can be accessed quickly through the icon view located on the " "left. Each option has a default value that is shown if it has not been " "previously set. This default value should be OK in most cases.


You " "can access a short help message for each option using either the '?' button " "in the the title bar, or the button at the bottom of this dialog.

" msgstr "" #: editlist.cpp:33 msgid "Add..." msgstr "Ngeta..." #: editlist.cpp:34 msgid "Edit..." msgstr "Hlela...S" #: editlist.cpp:36 msgid "Default List" msgstr "" #: locationdialog.cpp:50 msgid "Basic" msgstr "" #: locationdialog.cpp:51 msgid "Digest" msgstr "" #: locationdialog.cpp:54 #, fuzzy msgid "User" msgstr "Umsebentisi:" #: locationdialog.cpp:55 msgid "System" msgstr "" #: locationdialog.cpp:56 #, fuzzy msgid "Group" msgstr "Licembu:" #: locationdialog.cpp:58 msgid "Always" msgstr "" #: locationdialog.cpp:59 #, fuzzy msgid "Never" msgstr "Sigcini" #: locationdialog.cpp:60 msgid "Required" msgstr "" #: locationdialog.cpp:61 msgid "If Requested" msgstr "" #: locationdialog.cpp:63 msgid "All" msgstr "" #: locationdialog.cpp:64 msgid "Any" msgstr "" #: locationdialog.cpp:72 msgid "Resource:" msgstr "" #: locationdialog.cpp:73 msgid "Authentication:" msgstr "" #: locationdialog.cpp:74 #, fuzzy msgid "Class:" msgstr "Liklilasi" #: locationdialog.cpp:75 msgid "Names:" msgstr "" #: locationdialog.cpp:76 #, fuzzy msgid "Encryption:" msgstr "Sebentisa kubhalwa ngemakhodi kwe SSL" #: locationdialog.cpp:77 msgid "Satisfy:" msgstr "" #: locationdialog.cpp:78 msgid "ACL order:" msgstr "" #: locationdialog.cpp:79 #, fuzzy msgid "ACL addresses:" msgstr "Likheli:" #: locationdialog.cpp:100 msgid "Location" msgstr "" #: main.cpp:29 msgid "Configuration file to load" msgstr "" #: main.cpp:36 main.cpp:37 msgid "A CUPS configuration tool" msgstr "" #: portdialog.cpp:41 msgid "Use SSL encryption" msgstr "Sebentisa kubhalwa ngemakhodi kwe SSL" #: portdialog.cpp:44 msgid "Port:" msgstr "Sikhungo:" #: portdialog.cpp:55 msgid "Listen To" msgstr "Lalela ku" #: sizewidget.cpp:34 msgid "KB" msgstr "" #: sizewidget.cpp:35 msgid "MB" msgstr "" #: sizewidget.cpp:36 msgid "GB" msgstr "" #: sizewidget.cpp:37 msgid "Tiles" msgstr "" #: cupsd.conf.template:23 msgid "" "_: Do not translate the keyword between brackets (e.g. ServerName, " "ServerAdmin, etc.)\n" "Server name (ServerName)\n" "

\n" "The hostname of your server, as advertised to the world.\n" "By default CUPS will use the hostname of the system.

\n" "

\n" "To set the default server used by clients, see the client.conf file.

\n" "

\n" "ex: myhost.domain.com

\n" msgstr "" #: cupsd.conf.template:36 msgid "" "_: Do not translate the keyword between brackets (e.g. ServerName, " "ServerAdmin, etc.)\n" "Server administrator (ServerAdmin)\n" "

\n" "The email address to send all complaints or problems to.\n" "By default CUPS will use \"root@hostname\".

\n" "

\n" "ex: root@myhost.com

\n" msgstr "" #: cupsd.conf.template:47 msgid "" "_: Do not translate the keyword between brackets (e.g. ServerName, " "ServerAdmin, etc.)\n" "Access log (AccessLog)\n" "

\n" "The access log file; if this does not start with a leading /\n" "then it is assumed to be relative to ServerRoot. By default set to\n" "\"/var/log/cups/access_log\".

\n" "

\n" "You can also use the special name syslog to send the output to the\n" "syslog file or daemon.

\n" "

\n" "ex: /var/log/cups/access_log

\n" msgstr "" #: cupsd.conf.template:62 msgid "" "_: Do not translate the keyword between brackets (e.g. ServerName, " "ServerAdmin, etc.)\n" "Data directory (DataDir)\n" "

\n" "The root directory for the CUPS data files.\n" "By default /usr/share/cups.

\n" "

\n" "ex: /usr/share/cups

\n" msgstr "" #: cupsd.conf.template:73 msgid "" "_: Do not translate the keyword between brackets (e.g. ServerName, " "ServerAdmin, etc.)\n" "Default character set (DefaultCharset)\n" "

\n" "The default character set to use. If not specified,\n" "defaults to utf-8. Note that this can also be overridden in\n" "HTML documents...

\n" "

\n" "ex: utf-8

\n" msgstr "" #: cupsd.conf.template:85 msgid "" "_: Do not translate the keyword between brackets (e.g. ServerName, " "ServerAdmin, etc.)\n" "Default language (DefaultLanguage)\n" "

\n" "The default language if not specified by the browser.\n" "If not specified, the current locale is used.

\n" "

\n" "ex: en

\n" msgstr "" #: cupsd.conf.template:96 msgid "" "_: Do not translate the keyword between brackets (e.g. ServerName, " "ServerAdmin, etc.)\n" "Document directory (DocumentRoot)\n" "

\n" "The root directory for HTTP documents that are served.\n" "By default the compiled-in directory.

\n" "

\n" "ex: /usr/share/cups/doc-root

\n" msgstr "" #: cupsd.conf.template:107 msgid "" "_: Do not translate the keyword between brackets (e.g. ServerName, " "ServerAdmin, etc.)\n" "Error log (ErrorLog)\n" "

\n" "The error log file; if this does not start with a leading /\n" "then it is assumed to be relative to ServerRoot. By default set to\n" "\"/var/log/cups/error_log\".

\n" "

\n" "You can also use the special name syslog to send the output to the\n" "syslog file or daemon.

\n" "

\n" "ex: /var/log/cups/error_log

\n" msgstr "" #: cupsd.conf.template:122 msgid "" "_: Do not translate the keyword between brackets (e.g. ServerName, " "ServerAdmin, etc.)\n" "Font path (FontPath)\n" "

\n" "The path to locate all font files (currently only for pstoraster).\n" "By default /usr/share/cups/fonts.

\n" "

\n" "ex: /usr/share/cups/fonts

\n" msgstr "" #: cupsd.conf.template:133 msgid "" "_: Do not translate the keyword between brackets (e.g. ServerName, " "ServerAdmin, etc.)\n" "Log level (LogLevel)\n" "

\n" "Controls the number of messages logged to the ErrorLog\n" "file and can be one of the following:

\n" "
    \n" "
  • debug2: Log everything.
    • \n" "
  • debug: Log almost everything.
    • \n" "
  • info: Log all requests and state changes.
    • \n" "
  • warn: Log errors and warnings.
    • \n" "
  • error: Log only errors.
    • \n" "
  • none: Log nothing.
    • \n" "

\n" "ex: info

\n" msgstr "" #: cupsd.conf.template:151 msgid "" "_: Do not translate the keyword between brackets (e.g. ServerName, " "ServerAdmin, etc.)\n" "Max log size (MaxLogSize)\n" "

\n" "Controls the maximum size of each log file before they are\n" "rotated. Defaults to 1048576 (1MB). Set to 0 to disable log rotating.

\n" "

\n" "ex: 1048576

\n" msgstr "" #: cupsd.conf.template:162 msgid "" "_: Do not translate the keyword between brackets (e.g. ServerName, " "ServerAdmin, etc.)\n" "Page log (PageLog)\n" "

\n" "The page log file; if this does not start with a leading /\n" "then it is assumed to be relative to ServerRoot. By default set to\n" "\"/var/log/cups/page_log\".

\n" "

\n" "You can also use the special name syslog to send the output to the\n" "syslog file or daemon.

\n" "

\n" "ex: /var/log/cups/page_log

\n" msgstr "" #: cupsd.conf.template:177 msgid "" "_: Do not translate the keyword between brackets (e.g. ServerName, " "ServerAdmin, etc.)\n" "Preserve job history (PreserveJobHistory)\n" "

\n" "Whether or not to preserve the job history after a\n" "job is completed, canceled, or stopped. Default is Yes.

\n" "

\n" "ex: Yes

\n" msgstr "" #: cupsd.conf.template:188 msgid "" "_: Do not translate the keyword between brackets (e.g. ServerName, " "ServerAdmin, etc.)\n" "Preserve job files (PreserveJobFiles)\n" "

\n" "Whether or not to preserve the job files after a\n" "job is completed, canceled, or stopped. Default is No.

\n" "

\n" "ex: No

\n" msgstr "" #: cupsd.conf.template:199 msgid "" "_: Do not translate the keyword between brackets (e.g. ServerName, " "ServerAdmin, etc.)\n" "Printcap file (Printcap)\n" "

\n" "The name of the printcap file. Default is no filename.\n" "Leave blank to disable printcap file generation.

\n" "

\n" "ex: /etc/printcap

\n" msgstr "" #: cupsd.conf.template:210 msgid "" "_: Do not translate the keyword between brackets (e.g. ServerName, " "ServerAdmin, etc.)\n" "Request directory (RequestRoot)\n" "

\n" "The directory where request files are stored.\n" "By default /var/spool/cups.

\n" "

\n" "ex: /var/spool/cups

\n" msgstr "" #: cupsd.conf.template:221 msgid "" "_: Do not translate the keyword between brackets (e.g. ServerName, " "ServerAdmin, etc.)\n" "Remote root user (RemoteRoot)\n" "

\n" "The name of the user assigned to unauthenticated accesses\n" "from remote systems. By default \"remroot\".

\n" "

\n" "ex: remroot

\n" msgstr "" #: cupsd.conf.template:232 msgid "" "_: Do not translate the keyword between brackets (e.g. ServerName, " "ServerAdmin, etc.)\n" "Server binaries (ServerBin)\n" "

\n" "The root directory for the scheduler executables.\n" "By default /usr/lib/cups or /usr/lib32/cups (IRIX 6.5).

\n" "

\n" "ex: /usr/lib/cups

\n" msgstr "" #: cupsd.conf.template:243 msgid "" "_: Do not translate the keyword between brackets (e.g. ServerName, " "ServerAdmin, etc.)\n" "Server files (ServerRoot)\n" "

\n" "The root directory for the scheduler.\n" "By default /etc/cups.

\n" "

\n" "ex: /etc/cups

\n" msgstr "" #: cupsd.conf.template:254 msgid "" "_: Do not translate the keyword between brackets (e.g. ServerName, " "ServerAdmin, etc.)\n" "User (User)\n" "

\n" "The user the server runs under. Normally this\n" "must be lp, however you can configure things for another user\n" "as needed.

\n" "

\n" "Note: the server must be run initially as root to support the\n" "default IPP port of 631. It changes users whenever an external\n" "program is run...

\n" "

\n" "ex: lp

\n" msgstr "" #: cupsd.conf.template:270 msgid "" "_: Do not translate the keyword between brackets (e.g. ServerName, " "ServerAdmin, etc.)\n" "Group (Group)\n" "

\n" "The group the server runs under. Normally this\n" "must be lpadmin, however you can configure things for another\n" "group as needed.

\n" "

\n" "ex: lpadmin

\n" msgstr "" #: cupsd.conf.template:282 msgid "" "_: Do not translate the keyword between brackets (e.g. ServerName, " "ServerAdmin, etc.)\n" "RIP cache (RIPCache)\n" "

\n" "The amount of memory that each RIP should use to cache\n" "bitmaps. The value can be any real number followed by \"k\" for\n" "kilobytes, \"m\" for megabytes, \"g\" for gigabytes, or \"t\" for tiles\n" "(1 tile = 256x256 pixels). Defaults to \"8m\" (8 megabytes).

\n" "

\n" "ex: 8m

\n" msgstr "" #: cupsd.conf.template:295 msgid "" "_: Do not translate the keyword between brackets (e.g. ServerName, " "ServerAdmin, etc.)\n" "Temporary files (TempDir)\n" "

\n" "The directory to put temporary files in. This directory must be\n" "writable by the user defined above! Defaults to \"/var/spool/cups/tmp\" or\n" "the value of the TMPDIR environment variable.

\n" "

\n" "ex: /var/spool/cups/tmp

\n" msgstr "" #: cupsd.conf.template:307 msgid "" "_: Do not translate the keyword between brackets (e.g. ServerName, " "ServerAdmin, etc.)\n" "Filter limit (FilterLimit)\n" "

\n" "Sets the maximum cost of all job filters that can be run\n" "at the same time. A limit of 0 means no limit. A typical job may need\n" "a filter limit of at least 200; limits less than the minimum required\n" "by a job force a single job to be printed at any time.

\n" "

\n" "The default limit is 0 (unlimited).

\n" "

\n" "ex: 200

\n" msgstr "" #: cupsd.conf.template:322 msgid "" "_: Do not translate the keyword between brackets (e.g. ServerName, " "ServerAdmin, etc.)\n" "Listen to (Port/Listen)\n" "

\n" "Ports/addresses that are listened to. The default port 631 is reserved\n" "for the Internet Printing Protocol (IPP) and is what is used here.

\n" "

\n" "You can have multiple Port/Listen lines to listen to more than one\n" "port or address, or to restrict access.

\n" "

\n" "Note: Unfortunately, most web browsers don't support TLS or HTTP Upgrades\n" "for encryption. If you want to support web-based encryption you will\n" "probably need to listen on port 443 (the \"HTTPS\" port...).

\n" "

\n" "ex: 631, myhost:80, 1.2.3.4:631

\n" msgstr "" #: cupsd.conf.template:348 msgid "" "_: Do not translate the keyword between brackets (e.g. ServerName, " "ServerAdmin, etc.)\n" "Hostname lookups (HostNameLookups)\n" "

\n" "Whether or not to do lookups on IP addresses to get a\n" "fully-qualified hostname. This defaults to Off for performance reasons...\n" "

\n" "ex: On

\n" msgstr "" #: cupsd.conf.template:359 msgid "" "_: Do not translate the keyword between brackets (e.g. ServerName, " "ServerAdmin, etc.)\n" "Keep alive (KeepAlive)\n" "

\n" "Whether or not to support the Keep-Alive connection\n" "option. Default is on.

\n" "

\n" "ex: On

\n" msgstr "" #: cupsd.conf.template:370 msgid "" "_: Do not translate the keyword between brackets (e.g. ServerName, " "ServerAdmin, etc.)\n" "Keep-alive timeout (KeepAliveTimeout)\n" "

\n" "The timeout (in seconds) before Keep-Alive connections are\n" "automatically closed. Default is 60 seconds.

\n" "

\n" "ex: 60

\n" msgstr "" #: cupsd.conf.template:381 msgid "" "_: Do not translate the keyword between brackets (e.g. ServerName, " "ServerAdmin, etc.)\n" "Max clients (MaxClients)\n" "

\n" "Controls the maximum number of simultaneous clients that\n" "will be handled. Defaults to 100.

\n" "

\n" "ex: 100

\n" msgstr "" #: cupsd.conf.template:392 msgid "" "_: Do not translate the keyword between brackets (e.g. ServerName, " "ServerAdmin, etc.)\n" "Max request size (MaxRequestSize)\n" "

\n" "Controls the maximum size of HTTP requests and print files.\n" "Set to 0 to disable this feature (defaults to 0).

\n" "

\n" "ex: 0

\n" msgstr "" #: cupsd.conf.template:403 msgid "" "_: Do not translate the keyword between brackets (e.g. ServerName, " "ServerAdmin, etc.)\n" "Client timeout (Timeout)\n" "

\n" "The timeout (in seconds) before requests time out. Default is 300 seconds.\n" "

\n" "ex: 300

\n" msgstr "" #: cupsd.conf.template:413 msgid "" "_: Do not translate the keyword between brackets (e.g. ServerName, " "ServerAdmin, etc.)\n" "Use browsing (Browsing)\n" "

\n" "Whether or not to listen to printer \n" "information from other CUPS servers. \n" "

\n" "

\n" "Enabled by default.\n" "

\n" "

\n" "Note: to enable the sending of browsing\n" "information from this CUPS server to the LAN,\n" "specify a valid BrowseAddress.\n" "

\n" "

\n" "ex: On

\n" msgstr "" #: cupsd.conf.template:433 msgid "" "_: Do not translate the keyword between brackets (e.g. ServerName, " "ServerAdmin, etc.)\n" "Use short names (BrowseShortNames)\n" "

\n" "Whether or not to use \"short\" names for remote printers\n" "when possible (e.g. \"printer\" instead of \"printer@host\"). Enabled by\n" "default.

\n" "

\n" "ex: Yes

\n" msgstr "" #: cupsd.conf.template:445 msgid "" "_: Do not translate the keyword between brackets (e.g. ServerName, " "ServerAdmin, etc.)\n" "Browse addresses (BrowseAddress)\n" "

\n" "Specifies a broadcast address to be used. By\n" "default browsing information is broadcast to all active interfaces.

\n" "

\n" "Note: HP-UX 10.20 and earlier do not properly handle broadcast unless\n" "you have a Class A, B, C, or D netmask (i.e. no CIDR support).

\n" "

\n" "ex: x.y.z.255, x.y.255.255

\n" msgstr "" #: cupsd.conf.template:461 msgid "" "_: Do not translate the keyword between brackets (e.g. ServerName, " "ServerAdmin, etc.)\n" "Browse allow/deny (BrowseAllow/BrowseDeny)\n" "

\n" "BrowseAllow: specifies an address mask to allow for incoming browser\n" "packets. The default is to allow packets from all addresses.

\n" "

\n" "BrowseDeny: specifies an address mask to deny for incoming browser\n" "packets. The default is to deny packets from no addresses.

\n" "

\n" "Both \"BrowseAllow\" and \"BrowseDeny\" accept the following notations for\n" "addresses:

\n" "
\n"
"All\n"
"None\n"
"*.domain.com\n"
".domain.com\n"
"host.domain.com\n"
"nnn.*\n"
"nnn.nnn.*\n"
"nnn.nnn.nnn.*\n"
"nnn.nnn.nnn.nnn\n"
"nnn.nnn.nnn.nnn/mm\n"
"nnn.nnn.nnn.nnn/mmm.mmm.mmm.mmm\n"
"

\n" "The hostname/domainname restrictions only work if you have turned hostname\n" "lookups on!

\n" msgstr "" #: cupsd.conf.template:492 msgid "" "_: Do not translate the keyword between brackets (e.g. ServerName, " "ServerAdmin, etc.)\n" "Browse interval (BrowseInterval)\n" "

\n" "The time between browsing updates in seconds. Default\n" "is 30 seconds.

\n" "

\n" "Note that browsing information is sent whenever a printer's state changes\n" "as well, so this represents the maximum time between updates.

\n" "

\n" "Set this to 0 to disable outgoing broadcasts so your local printers are\n" "not advertised but you can still see printers on other hosts.

\n" "

\n" "ex: 30

\n" msgstr "" #: cupsd.conf.template:509 msgid "" "_: Do not translate the keyword between brackets (e.g. ServerName, " "ServerAdmin, etc.)\n" "Browse order (BrowseOrder)\n" "

\n" "Specifies the order of BrowseAllow/BrowseDeny comparisons.

\n" "

\n" "ex: allow,deny

\n" msgstr "" #: cupsd.conf.template:520 msgid "" "_: Do not translate the keyword between brackets (e.g. ServerName, " "ServerAdmin, etc.)\n" "Browse poll (BrowsePoll)\n" "

\n" "Poll the named server(s) for printers.

\n" "

\n" "ex: myhost:631

\n" msgstr "" #: cupsd.conf.template:530 msgid "" "_: Do not translate the keyword between brackets (e.g. ServerName, " "ServerAdmin, etc.)\n" "Browse port (BrowsePort)\n" "

\n" "The port used for UDP broadcasts. By default this is\n" "the IPP port; if you change this you need to do it on all servers.\n" "Only one BrowsePort is recognized.

\n" "

\n" "ex: 631

\n" msgstr "" #: cupsd.conf.template:542 msgid "" "_: Do not translate the keyword between brackets (e.g. ServerName, " "ServerAdmin, etc.)\n" "Browse relay (BrowseRelay)\n" "

\n" "Relay browser packets from one address/network to another.

\n" "

\n" "ex: src-address dest-address

\n" msgstr "" #: cupsd.conf.template:552 msgid "" "_: Do not translate the keyword between brackets (e.g. ServerName, " "ServerAdmin, etc.)\n" "Browse timeout (BrowseTimeout)\n" "

\n" "The timeout (in seconds) for network printers - if we don't\n" "get an update within this time the printer will be removed\n" "from the printer list. This number definitely should not be\n" "less the BrowseInterval value for obvious reasons. Defaults\n" "to 300 seconds.

\n" "

\n" "ex: 300

\n" msgstr "" #: cupsd.conf.template:566 msgid "" "_: Do not translate the keyword between brackets (e.g. ServerName, " "ServerAdmin, etc.)\n" "Implicit classes (ImplicitClasses)\n" "

\n" "Whether or not to use implicit classes.

\n" "

\n" "Printer classes can be specified explicitly in the classes.conf\n" "file, implicitly based upon the printers available on the LAN, or\n" "both.

\n" "

\n" "When ImplicitClasses is On, printers on the LAN with the same name\n" "(e.g. Acme-LaserPrint-1000) will be put into a class with the same\n" "name. This allows you to setup multiple redundant queues on a LAN\n" "without a lot of administrative difficulties. If a user sends a\n" "job to Acme-LaserPrint-1000, the job will go to the first available\n" "queue.

\n" "

\n" "Enabled by default.

\n" msgstr "" #: cupsd.conf.template:587 msgid "" "_: Do not translate the keyword between brackets (e.g. ServerName, " "ServerAdmin, etc.)\n" "System group (SystemGroup)\n" "

\n" "The group name for \"System\" (printer administration)\n" "access. The default varies depending on the operating system, but\n" "will be sys, system, or root (checked for in that " "order).

\n" "

\n" "ex: lpadmin

\n" msgstr "" #: cupsd.conf.template:599 msgid "" "_: Do not translate the keyword between brackets (e.g. ServerName, " "ServerAdmin, etc.)\n" "Encryption certificate (ServerCertificate)\n" "

\n" "The file to read containing the server's certificate.\n" "Defaults to \"/etc/cups/ssl/server.crt\".

\n" "

\n" "ex: /etc/cups/ssl/server.crt

\n" msgstr "" #: cupsd.conf.template:610 msgid "" "_: Do not translate the keyword between brackets (e.g. ServerName, " "ServerAdmin, etc.)\n" "Encryption key (ServerKey)\n" "

\n" "The file to read containing the server's key.\n" "Defaults to \"/etc/cups/ssl/server.key\".

\n" "

\n" "ex: /etc/cups/ssl/server.key

\n" msgstr "" #: cupsd.conf.template:621 msgid "" "_: Do not translate the keyword between brackets (e.g. ServerName, " "ServerAdmin, etc.)\n" "Access permissions\n" "Access permissions for each directory served by the scheduler.\n" "Locations are relative to DocumentRoot...\n" "AuthType: the authorization to use:\n" "None - Perform no authentication\n" "Basic - Perform authentication using the HTTP Basic method.\n" "Digest - Perform authentication using the HTTP Digest method.\n" "(Note: local certificate authentication can be substituted by\n" "the client for Basic or Digest when connecting to the\n" "localhost interface)\n" "AuthClass: the authorization class; currently only Anonymous, User,\n" "System (valid user belonging to group SystemGroup), and Group\n" "(valid user belonging to the specified group) are supported.\n" "AuthGroupName: the group name for \"Group\" authorization.\n" "Order: the order of Allow/Deny processing.\n" "Allow: allows access from the specified hostname, domain, IP address, or\n" "network.\n" "Deny: denies access from the specified hostname, domain, IP address, or\n" "network.\n" "Both \"Allow\" and \"Deny\" accept the following notations for addresses:\n" "All\n" "None\n" "*.domain.com\n" ".domain.com\n" "host.domain.com\n" "nnn.*\n" "nnn.nnn.*\n" "nnn.nnn.nnn.*\n" "nnn.nnn.nnn.nnn\n" "nnn.nnn.nnn.nnn/mm\n" "nnn.nnn.nnn.nnn/mmm.mmm.mmm.mmm\n" "The host and domain address require that you enable hostname lookups\n" "with \"HostNameLookups On\" above.\n" "Encryption: whether or not to use encryption; this depends on having\n" "the OpenSSL library linked into the CUPS library and scheduler.\n" "Possible values:\n" "Always - Always use encryption (SSL)\n" "Never - Never use encryption\n" "Required - Use TLS encryption upgrade\n" "IfRequested - Use encryption if the server requests it\n" "The default value is \"IfRequested\".\n" msgstr "" #: cupsd.conf.template:707 msgid "" "_: Do not translate the keyword between brackets (e.g. ServerName, " "ServerAdmin, etc.)\n" "Authentication (AuthType)\n" "

\n" "The authorization to use:

\n" "

    \n" "
  • None - Perform no authentication.
    • \n" "
  • Basic - Perform authentication using the HTTP Basic method.\n" "
  • Digest - Perform authentication using the HTTP Digest method.\n" "

\n" "Note: local certificate authentication can be substituted by\n" "the client for Basic or Digest when connecting to the\n" "localhost interface.

\n" msgstr "" #: cupsd.conf.template:721 msgid "" "_: Do not translate the keyword between brackets (e.g. ServerName, " "ServerAdmin, etc.)\n" "Class (AuthClass)\n" "

\n" "The authorization class; currently only Anonymous, User,\n" "System (valid user belonging to group SystemGroup), and Group\n" "(valid user belonging to the specified group) are supported.

\n" msgstr "" #: cupsd.conf.template:729 msgid "" "_: Do not translate the keyword between brackets (e.g. ServerName, " "ServerAdmin, etc.)\n" "

The user/group names allowed to access the resource. The format is a\n" "comma separated list.

\n" msgstr "" #: cupsd.conf.template:734 msgid "" "_: Do not translate the keyword between brackets (e.g. ServerName, " "ServerAdmin, etc.)\n" "Satisfy (Satisfy)\n" "

\n" "This directive controls whether all specified conditions must\n" "be satisfied to allow access to the resource. If set to \"all\",\n" "then all authentication and access control conditions must be\n" "satisfied to allow access.\n" "

\n" "

\n" "Setting Satisfy to \"any\" allows a user to gain access if the\n" "authentication or access control requirements are satisfied.\n" "For example, you might require authentication for remote access,\n" "but allow local access without authentication.\n" "

\n" "

\n" "The default is \"all\".\n" "

\n" msgstr "" #: cupsd.conf.template:753 msgid "" "_: Do not translate the keyword between brackets (e.g. ServerName, " "ServerAdmin, etc.)\n" "Authentication group name (AuthGroupName)\n" "

\n" "The group name for Group authorization.

\n" msgstr "" #: cupsd.conf.template:759 msgid "" "_: Do not translate the keyword between brackets (e.g. ServerName, " "ServerAdmin, etc.)\n" "ACL order (Order)\n" "

\n" "The order of Allow/Deny processing.

\n" msgstr "" #: cupsd.conf.template:765 msgid "" "_: Do not translate the keyword between brackets (e.g. ServerName, " "ServerAdmin, etc.)\n" "Allow\n" "

\n" "Allows access from the specified hostname, domain, IP address, or\n" "network. Possible values are:

\n" "
\n"
"All\n"
"None\n"
"*.domain.com\n"
".domain.com\n"
"host.domain.com\n"
"nnn.*\n"
"nnn.nnn.*\n"
"nnn.nnn.nnn.*\n"
"nnn.nnn.nnn.nnn\n"
"nnn.nnn.nnn.nnn/mm\n"
"nnn.nnn.nnn.nnn/mmm.mmm.mmm.mmm\n"
"

\n" "The host and domain address require that you enable hostname lookups\n" "with \"HostNameLookups On\" above.

\n" msgstr "" #: cupsd.conf.template:787 msgid "" "_: Do not translate the keyword between brackets (e.g. ServerName, " "ServerAdmin, etc.)\n" "ACL addresses (Allow/Deny)\n" "

\n" "Allows/Denies access from the specified hostname, domain, IP address, or\n" "network. Possible values are:

\n" "
\n"
"All\n"
"None\n"
"*.domain.com\n"
".domain.com\n"
"host.domain.com\n"
"nnn.*\n"
"nnn.nnn.*\n"
"nnn.nnn.nnn.*\n"
"nnn.nnn.nnn.nnn\n"
"nnn.nnn.nnn.nnn/mm\n"
"nnn.nnn.nnn.nnn/mmm.mmm.mmm.mmm\n"
"

\n" "The host and domain address require that you enable hostname lookups\n" "with \"HostNameLookups On\" above.

\n" msgstr "" #: cupsd.conf.template:809 msgid "" "_: Do not translate the keyword between brackets (e.g. ServerName, " "ServerAdmin, etc.)\n" "Encryption (Encryption)\n" "

\n" "Whether or not to use encryption; this depends on having\n" "the OpenSSL library linked into the CUPS library and scheduler.

\n" "

\n" "Possible values:

\n" "
    \n" "
  • Always - Always use encryption (SSL)
    • \n" "
  • Never - Never use encryption
    • \n" "
  • Required - Use TLS encryption upgrade
    • \n" "
  • IfRequested - Use encryption if the server requests it
    • \n" "

\n" "The default value is \"IfRequested\".

\n" msgstr "" #: cupsd.conf.template:825 msgid "" "_: Do not translate the keyword between brackets (e.g. ServerName, " "ServerAdmin, etc.)\n" "Access permissions\n" "

\n" "Access permissions for each directory served by the scheduler.\n" "Locations are relative to DocumentRoot...

\n" msgstr "" #: cupsd.conf.template:832 msgid "" "_: Do not translate the keyword between brackets (e.g. ServerName, " "ServerAdmin, etc.)\n" "Auto purge jobs (AutoPurgeJobs)\n" "

\n" "Automatically purge jobs when not needed for quotas.\n" "Default is No.

\n" msgstr "" #: cupsd.conf.template:841 msgid "" "_: Do not translate the keyword between brackets (e.g. ServerName, " "ServerAdmin, etc.)\n" "Browse protocols (BrowseProtocols)\n" "

\n" "Which protocols to use for browsing. Can be\n" "any of the following separated by whitespace and/or commas:

\n" "
    \n" "
  • all - Use all supported protocols.
    • \n" "
  • cups - Use the CUPS browse protocol.
    • \n" "
  • slp - Use the SLPv2 protocol.
    • \n" "

\n" "The default is cups.

\n" "

\n" "Note: If you choose to use SLPv2, it is strongly recommended that\n" "you have at least one SLP Directory Agent (DA) on your\n" "network. Otherwise, browse updates can take several seconds,\n" "during which the scheduler will not response to client\n" "requests.

\n" msgstr "" #: cupsd.conf.template:862 msgid "" "_: Do not translate the keyword between brackets (e.g. ServerName, " "ServerAdmin, etc.)\n" "Classification (Classification)\n" "

\n" "The classification level of the server. If set, this\n" "classification is displayed on all pages, and raw printing is disabled.\n" "The default is the empty string.

\n" "

\n" "ex: confidential\n" msgstr "" #: cupsd.conf.template:874 msgid "" "_: Do not translate the keyword between brackets (e.g. ServerName, " "ServerAdmin, etc.)\n" "Allow overrides (ClassifyOverride)\n" "

\n" "Whether to allow users to override the classification\n" "on printouts. If enabled, users can limit banner pages to before or\n" "after the job, and can change the classification of a job, but cannot\n" "completely eliminate the classification or banners.

\n" "

\n" "The default is off.

\n" msgstr "" #: cupsd.conf.template:887 msgid "" "_: Do not translate the keyword between brackets (e.g. ServerName, " "ServerAdmin, etc.)\n" "Hide implicit members (HideImplicitMembers)\n" "

\n" "Whether or not to show the members of an\n" "implicit class.

\n" "

\n" "When HideImplicitMembers is On, any remote printers that are\n" "part of an implicit class are hidden from the user, who will\n" "then only see a single queue even though many queues will be\n" "supporting the implicit class.

\n" "

\n" "Enabled by default.

\n" msgstr "" #: cupsd.conf.template:903 msgid "" "_: Do not translate the keyword between brackets (e.g. ServerName, " "ServerAdmin, etc.)\n" "Use "any" classes (ImplicitAnyClasses)\n" "

\n" "Whether or not to create AnyPrinter implicit\n" "classes.

\n" "

\n" "When ImplicitAnyClasses is On and a local queue of the same name\n" "exists, e.g. \"printer\", \"printer@server1\", \"printer@server1\", then\n" "an implicit class called \"Anyprinter\" is created instead.

\n" "

\n" "When ImplicitAnyClasses is Off, implicit classes are not created\n" "when there is a local queue of the same name.

\n" "

\n" "Disabled by default.

\n" msgstr "" #: cupsd.conf.template:921 msgid "" "_: Do not translate the keyword between brackets (e.g. ServerName, " "ServerAdmin, etc.)\n" "Max jobs (MaxJobs)\n" "

\n" "Maximum number of jobs to keep in memory (active and completed).\n" "Default is 0 (no limit).

\n" msgstr "" #: cupsd.conf.template:930 msgid "" "_: Do not translate the keyword between brackets (e.g. ServerName, " "ServerAdmin, etc.)\n" "Max jobs per user (MaxJobsPerUser)\n" "

\n" "The MaxJobsPerUser directive controls the maximum number of active\n" "jobs that are allowed for each user. Once a user reaches the limit, new\n" "jobs will be rejected until one of the active jobs is completed, stopped,\n" "aborted, or canceled.

\n" "

\n" "Setting the maximum to 0 disables this functionality.\n" "Default is 0 (no limit).\n" "

\n" msgstr "" #: cupsd.conf.template:945 msgid "" "_: Do not translate the keyword between brackets (e.g. ServerName, " "ServerAdmin, etc.)\n" "Max jobs per printer (MaxJobsPerPrinter)\n" "

\n" "The MaxJobsPerPrinter directive controls the maximum number of active\n" "jobs that are allowed for each printer or class. Once a printer or class\n" "reaches the limit, new jobs will be rejected until one of the active jobs\n" "is completed, stopped, aborted, or canceled.

\n" "

\n" "Setting the maximum to 0 disables this functionality.\n" "Default is 0 (no limit).\n" "

\n" msgstr "" #: cupsd.conf.template:960 msgid "" "_: Do not translate the keyword between brackets (e.g. ServerName, " "ServerAdmin, etc.)\n" "Port\n" "

\n" "The port value that the CUPS daemon is listening to. Default is 631.

\n" msgstr "" #: cupsd.conf.template:966 msgid "" "_: Do not translate the keyword between brackets (e.g. ServerName, " "ServerAdmin, etc.)\n" "Address\n" "

\n" "The address that the CUPS daemon is listening at. Leave it empty or use\n" "an asterisk (*) to specify a port value on the entire subnetwork.

\n" msgstr "" #: cupsd.conf.template:973 msgid "" "_: Do not translate the keyword between brackets (e.g. ServerName, " "ServerAdmin, etc.)\n" "

Check this box if you want to use SSL encryption with this address/port.\n" "

\n" msgstr "" #~ msgid "Directories" #~ msgstr "Ema-directories" #, fuzzy #~ msgid "Directories Settings" #~ msgstr "Kuhleleka kwedirectory"