# translation of tdeprint.po to Tajik # translation of tdeprint.po to Тоҷикӣ # Copyright (C) 2004, 2005 Free Software Foundation, Inc. # 2004, infoDev, a World Bank organization # 2004, Khujand Computer Technologies, Inc. # 2004, Youth Opportunities, NGO # Marina Kolucheva , 2004. # Victor Ibragimov , 2004, 2003. # Malika Dushanbieva , 2004. # Akmal Salomov , 2004. # Akmal Vatanshoev , 2004. # Victor Ibragimov , 2005. # msgid "" msgstr "" "Project-Id-Version: tdeprint\n" "POT-Creation-Date: 2014-09-29 00:46-0500\n" "PO-Revision-Date: 2005-09-17 13:11+0500\n" "Last-Translator: Victor Ibragimov \n" "Language-Team: Tajik\n" "Language: \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 1.10\n" #: ppdloader.cpp:173 msgid "(line %1): " msgstr "(линияи %1): " #: marginpreview.cpp:135 msgid "No preview available" msgstr "Пешнамоишот дастрас намебошад" #: kmfactory.cpp:221 msgid "There was an error loading %1. The diagnostic is:

%2

" msgstr "Хатои мавриди пурборкунии %1. Диагностика:

%2

" #: kprintdialog.cpp:97 #, fuzzy msgid "" " Printer Location: The Location may describe where the " "selected printer is located. The Location description is created by the " "administrator of the print system (or may be left empty). " msgstr "" " Маҳал метавонад дар куҷо будани принтери интихобшударо нишон " "диҳад. Нақшаи Маҳалро мудири системаи нусхабардорӣ ташкил медиҳад (ё ин ки чапи " "холӣ мебошад)." #: kprintdialog.cpp:102 #, fuzzy msgid "" " Printer Type: The Type indicates your printer type. " msgstr " Намуд Намуди чопгари шуморо намоиш хоҳад дод. " #: kprintdialog.cpp:104 #, fuzzy msgid "" " Printer State: The State indicates the state of the print " "queue on the print server (which could be your localhost). The state may be " "'Idle', 'Processing', 'Stopped', 'Paused' or similar. " msgstr "" "Ҳолат ҳолати чопкуниро дар сафи сервери чопӣ (ки маҳали асосӣ ту " "мебошад).Ин ҳолат мумкин 'Мунтазирӣ', 'Пардозиш', 'Истод', 'Таваққуф', ва " "монанди инҳо. " #: kprintdialog.cpp:108 #, fuzzy msgid "" " Printer Comment: The Comment may describe the selected " "printer. This comment is created by the administrator of the print system (or " "may be left empty). " msgstr "" " Тавзеҳ чопгари интихобшударо нишон медиҳад.Ин тавзеҳро мудири " "системаи чопкунӣ ташкил додааст (ё ин ки чап холӣ мебошад). " #: kprintdialog.cpp:112 #, fuzzy msgid "" " Printer Selection Menu: " "

Use this combo box to select the printer to which you want to print. " "Initially (if you run TDEPrint for the first time), you may only find the " "TDE special printers (which save jobs to disk [as PostScript- or " "PDF-files], or deliver jobs via email (as a PDF attachment). If you are missing " "a real printer, you need to... " "

    " "
  • ...either create a local printer with the help of the " "TDE Add Printer Wizard. The Wizard is available for the CUPS and RLPR " "printing systems (click button to the left of the 'Properties' " "button),
    • " "
  • ...or try to connect to an existing remote CUPS print server. You can " "connect by clicking the 'System Options' button below. A new dialog " "opens: click on the 'CUPS server' icon: Fill in the information " "required to use the remote server.
" "

Note: It may happen that you successfully connected to a remote CUPS " "server and still do not get a printer list. If this happens: force TDEPrint to " "re-load its configuration files. To reload the configuration files, either " "start kprinter again, or use the switch the print system away from CUPS and " "back again once. The print system switch can be made through a selection in " "the drop-down menu at bottom of this dialog when fully expanded).

" msgstr "" " Ин қуттиро барои интихоб кардани чопгар, ки чизе ки мехоҳи чоп кунӣ. Агар " "шумо фақат TDE чопгардҳои махсусӣ -- ки корро дар диск ( мисли " "Поскрипт- ё файлҳои-PDA), расондани корҳо бо воситаи почтаи электронӣ (мисли " "устувори PDA) -- вале сар додани чопгари ҳаққонӣ, ту бояд... " "
    " "
  • ...ё ин,ки сохтани чопгари маҳалӣ бо ёрии TDE Даровардани Устои " "Чопгари/em> , ки барои CUPS ё системаи чопгари RLPR дастрас аст (пахш кардани " "тугмаи ба тарафи чапи тугмаи 'Моликият'),
    • " "
  • ...ё кушиш кунед пайваст кардан ба дурдасти сервери чопгари CUPS бо пахш " "кардани Системаи интихобҳо... тугмаи поёнӣ.Диалоги нав кушода мешавад: " "пахш кардани пиктограммаи CUPS сервер ва хабароти дар бораи сервери " "дурдастро пур кунед.
" #: kprintdialog.cpp:137 #, fuzzy msgid "" " Print Job Properties: " "

This button opens a dialog where you can make decisions regarding all " "supported print job options. " msgstr "" " Ин тугма метавонад шуморо ба куҷое ки шумо такмили нигоҳ кардани ҳамаи " "пуштбонии чопи парметрҳои корӣ барад." #: kprintdialog.cpp:141 #, fuzzy msgid "" " Selective View on List of Printers: " "

This button reduces the list of visible printers to a shorter, more " "convenient, pre-defined list.

" "

This is particularly useful in enterprise environments with lots of " "printers. The default is to show all printers.

" "

To create a personal 'selective view list', click on the " "'System Options' button at the bottom of this dialog. Then, in the new " "dialog, select 'Filter' (left column in the " "TDE Print Configuration dialog) and setup your selection..

" "

Warning: Clicking this button without prior creation of a personal " "'selective view list' will make all printers dissappear from the " "view. (To re-enable all printers, just click this button again.)

" msgstr "" "" "

Ин тугма рӯйхати чопгарҳои намоёнро майда ва боз ҳам мувофиқ карда, " "рӯйхатро пешмуқаррар мекунад.

" "

Ин хусусан барои иқдоми муҳит бо чопгариҳои зиёд истифода бурда мешавад.Зикр " "карда нашуда ҳамаи чопгариҳоро нишон медиҳад.

" "

Сохтани филтри рӯйхати хусусӣ бо пахши \"Системаи Интихобҳо..." "\" тугма дар охири диалог ҷойгир аст. Баъд дар диалоги нав, \"Филтр\" " "(дар сутуни чапи Чопгари Муқаррарии KDA диалог) интихоб кунед.

" "" #: kprintdialog.cpp:154 msgid "" "TDE Add Printer Wizard " "

This button starts the TDE Add Printer Wizard.

" "

Use the Wizard (with \"CUPS\" or \"RLPR\"" ") to add locally defined printers to your system.

" "

Note: The TDE Add Printer Wizard does not " "work, and this button is disabled if you use \"Generic LPD\", " "\"LPRng\", or \"Print Through an External Program\".)

" msgstr "" #: kprintdialog.cpp:163 #, fuzzy msgid "" " External Print Command " "

Here you can enter any command that would also print for you in a " "konsole window.

Example: " "
a2ps -P <printername> --medium=A3
. " msgstr "" " Шумо метавонед ягон фармоне ворид кунед барои чопи шумо дар тирезаи " "konsole . " "
Мисол: " "
a2ps -P <printername> --medium=A3
. " #: kprintdialog.cpp:168 #, fuzzy msgid "" " Additional Print Job Options " "

This button shows or hides additional printing options." msgstr "" " Ин тугма метавонад шуморо ба куҷое ки шумо такмили нигоҳ кардани ҳамаи " "пуштбонии чопи парметрҳои корӣ барад." #: kprintdialog.cpp:170 #, fuzzy msgid "" " System Options: " "

This button starts a new dialog where you can adjust various settings of " "your printing system. Amongst them: " "

    " "
  • Should \tDE applications embed all fonts into the PostScript they generate " "for printing? " "
  • Should TDE use an external PostScript viewer like gv " "for print page previews? " "
  • Should TDEPrint use a local or a remote CUPS server?,
" "and many more.... " msgstr "" " Ин тугма диалоги нав, ки дар он ҷо шумо чизҳои ҳархелаи системаи " "чопкуниро танзим мекунед,сар мекунад. Дар байни онҳо: " "
    " "
  • Аризаҳои TDE бояд ҳамаи шрифтҳоро дар Поскриптиум дар гиронад, онҳо барои " "чопкунӣ тағир меёбанд? " "
  • KDA бояд нишондиҳандаи берунии Посткрптиумро дар gv " "барои сарлавҳаи саҳифаи чопкунӣ истифода барад? " "
  • TDEPrint бояд CUPS сервери маҳаллӣ ё дурро истифода барад?,
" "дигар ва ғайраҳоро.... " #: kprintdialog.cpp:182 #, fuzzy msgid "" " Help: This button takes you to the complete TDEPrint Manual" ". " msgstr "" "Ин тугма шуморо ба пуррагии TDEPrint Дасти. мебарад." #: kprintdialog.cpp:186 #, fuzzy msgid "" " Cancel: This button cancels your print job and quits the kprinter " "dialog. " msgstr "" " Ин кнопка корҳои чопгари шуморо ва диалоги kprinter-ро бекор мекунад. " "" #: kprintdialog.cpp:190 #, fuzzy msgid "" " Print: This button sends the job to the printing process. If you " "are sending non-PostScript files, you may be asked if you want TDE to convert " "the files into PostScript, or if you want your print subsystem (like CUPS) to " "do this. " msgstr "" " Ин тугма корри шуморо ба просесси чопкунӣ мефиристонад. Агар шумо файлҳои " "бе-поскриптиумро фиристонед, аз шумо мепурсанд агар шумо мехоҳед файлҳоро ба " "Поскриптиум тағир диҳед,ё ин ки чоп кардани дарсистемаи худро (мисли CUPS) " "мехоҳед ин кунад." #: kprintdialog.cpp:196 #, fuzzy msgid "" " Keep Printing Dialog Open" "

If you enable this checkbox, the printing dialog stays open after you hit " "the Print button.

" "

This is especially useful, if you need to test various print settings (like " "color matching for an inkjet printer) or if you want to send your job to " "multiple printers (one after the other) to have it finished more quickly.

" "" msgstr "" "" "

Агар шӯмо ин қутии муқобиларо тавоно кунед, чопи гуфтугу кушода мемонад " "агар шумо тугмаи Чоп пахш кунед.

" "

Ин ҳатман лозим аст, агар ба шумо тести ҳархелаи чопӣ(мисли ранги мутобиқи " "чопгари ҷавҳарфишон) агар шумо мехоҳед,ки коратонро чандчопи карда(як ба як)тез " "ба анҷом расони.

" #: kprintdialog.cpp:206 #, fuzzy msgid "" " Output File Name and Path: The \"Output file:\" shows you where " "your file will be saved if you decide to \"Print to File\" your job, using one " "of the TDE Special Printers named \"Print to File (PostScript)\" or " "\"Print to File (PDF)\". Choose a name and location that suits your need by " "using the button and/or editing the line on the right. " msgstr " TDE" #: kprintdialog.cpp:214 #, fuzzy msgid "" " Output File Name and Path: Edit this line to create a path and " "filename that suits your needs. (Button and Lineedit field are only available " "if you \"Print to File\") " msgstr "" " Ин хатро вироиш карда барои сохтани роҳ ва номи файл, ки туро қоил " "мекунад.(Фақат барои дастёри ту \"Чопи файл\") " #: kprintdialog.cpp:219 #, fuzzy msgid "" " Browse Directories button: This button calls the \"File Open / " "Browsed Directories\" dialog to let you choose a directory and file name where " "your \"Print-to-File\" job should be saved. " msgstr "" " Ин тугма ба \"Кушодани файл\" диалог муроҷият карда барои ёфтани " "маълумотнома ва номи файл, ки дар он ҷо \"Print-to-File\" кори шумо нигоҳ дошта " "мешавад." #: kprintdialog.cpp:225 #, fuzzy msgid "" " Add File to Job " "

This button calls the \"File Open / Browse Directories\" dialog to allow you " "to select a file for printing. Note, that " "

    " "
  • you can select ASCII or International Text, PDF, PostScript, JPEG, TIFF, " "PNG, GIF and many other graphical formats. " "
  • you can select various files from different paths and send them as one " "\"multi-file job\" to the printing system.
" msgstr " Ёддошт
  • Матн
" #: kprintdialog.cpp:237 #, fuzzy msgid "" " Print Preview Enable this checkbox if you want to see a preview of " "your printout. A preview lets you check if, for instance, your intended " "\"poster\" or \"pamphlet\" layout looks like you expected, without wasting " "paper first. It also lets you cancel the job if something looks wrong. " "

Note: The preview feature (and therefore this checkbox) is only " "visible for printjobs created from inside TDE applications. If you start " "kprinter from the commandline, or if you use kprinter as a print command for " "non-TDE applications (like Acrobat Reader, Firefox or OpenOffice), print " "preview is not available here. " msgstr "" " Дар гирондани ин қутии санҷиш агар шумо сарлавҳаи чопкардагиатонро нигоҳ " "кунед. Дар аввал биё санҷиш кунем агар, мисол, шумо ният доред\"эълон\" ё " "\"рисола\" ҷобаҷокунӣ чизҳое, ки шумо ният доштед, бе сарф кардани саҳифаи " "аввал. Вай инчунин корҳое,ки хато бошанд, кур мекунад. " #: kprintdialog.cpp:250 #, fuzzy msgid "" " Set as Default Printer This button sets the current printer as the " "user's default. " "

Note: (Button is only visible if the checkbox for " "System Options --> General --> Miscellaneous: " "\"Defaults to the last printer used in the application\" " "is disabled.) " msgstr "" " Ин тугма ҷараёни чопгардро мисли хатогии истифодабаранда барқарор " "мекунад. (Тугма фақат намоён аст агар Системаи Интихобҳо ... --> " "Умумӣ --> Ҳархела: \"Хатогиҳо дар чопгарди охириндар ариза " "истифода шудааст \" номуяссар аст.) " #: kprintdialog.cpp:265 management/kmmainview.cpp:289 management/kmwend.cpp:90 #: management/smbview.cpp:43 msgid "Printer" msgstr "Чопгар" #: kprintdialog.cpp:278 management/kmspecialprinterdlg.cpp:56 #: management/kxmlcommanddlg.cpp:114 msgid "&Name:" msgstr "&Ном:" #: kprintdialog.cpp:280 management/kminfopage.cpp:50 msgid "" "_: Status\n" "State:" msgstr "Ҳолат:" #: kprintdialog.cpp:282 management/kminfopage.cpp:48 msgid "Type:" msgstr "Намуд:" #: kprintdialog.cpp:284 management/kmwname.cpp:40 msgid "Location:" msgstr "Ҷойгиршавӣ:" #: kprintdialog.cpp:286 management/kxmlcommanddlg.cpp:176 msgid "Comment:" msgstr "Шарҳ:" #: kprintdialog.cpp:289 msgid "P&roperties" msgstr "Х&усусиятҳо..." #: kprintdialog.cpp:291 #, fuzzy msgid "System Op&tions" msgstr "Параметрҳои &система..." #: kprintdialog.cpp:293 msgid "Set as &Default" msgstr "Асосӣ &намудан" #: kprintdialog.cpp:300 #, fuzzy msgid "Toggle selective view on printer list" msgstr "Қодири қабул кардани рӯйхати чопгарҳо нестам." #: kprintdialog.cpp:305 msgid "Add printer..." msgstr "Иловаи чопгар..." #: cups/ippreportdlg.cpp:34 cups/ippreportdlg.cpp:41 kprintdialog.cpp:307 msgid "&Print" msgstr "&Чоп" #: kprintdialog.cpp:313 msgid "Previe&w" msgstr "Пеш&намоиш" #: kprintdialog.cpp:315 msgid "O&utput file:" msgstr "Чоп намудан ба &файл:" #: kprintdialog.cpp:321 msgid "Print co&mmand:" msgstr "Фармони &чоп:" #: kprintdialog.cpp:330 msgid "Show/hide advanced options" msgstr "Намоиш /пинҳон намудани параметрҳои иловагӣ" #: kprintdialog.cpp:332 msgid "&Keep this dialog open after printing" msgstr "Ин диалогро &баъди чоп кушода монед" #: kprintdialog.cpp:551 kprintdialog.cpp:939 msgid "An error occurred while retrieving the printer list:" msgstr "Мавриди қабул намудани рӯйхати чопгарҳо, хатогӣ рӯй дод:" #: kprintdialog.cpp:715 msgid "The output filename is empty." msgstr "Баромади номи файлҳо холӣ аст." #: kprintdialog.cpp:754 msgid "You don't have write permissions to this file." msgstr "Шумо барои навиштани ин файл ҳуқуқ надоред." #: kprintdialog.cpp:760 msgid "The output directory does not exist." msgstr "Каталоги хурӯҷӣ вуҷуд надорад." #: kprintdialog.cpp:762 msgid "You don't have write permissions in that directory." msgstr "Шумо барои навиштани ин каталог ҳуқуқ надоред." #: kprintdialog.cpp:874 msgid "&Options <<" msgstr "" #: kprintdialog.cpp:887 msgid "&Options >>" msgstr "" #: kprintdialog.cpp:929 msgid "Initializing printing system..." msgstr "Дар мавриди қарор гирифтани системаи чопгар..." #: kprintdialog.cpp:965 msgid "Print to File" msgstr "Ба файл чоп кунед" #: kmprinter.cpp:197 kprintdialog.cpp:983 msgid "All Files" msgstr "Тамоми файлҳо" #: kprintprocess.cpp:75 msgid "File transfer failed." msgstr "Хатои гузаронидани файл." #: kprintprocess.cpp:81 msgid "Abnormal process termination (%1)." msgstr "Авариявӣ ба итмомрасии амал(%1)." #: kprintprocess.cpp:83 msgid "%1: execution failed with message:

%2

" msgstr "Иҷрошавӣ %1 бо хатогӣ ба итмом расид:

%2

" #: lpr/kmlprjobmanager.cpp:83 msgid "Unsupported operation." msgstr "Амалиёти дастгир нашаванда." #: lpr/kmconfiglpr.cpp:33 lpr/kmconfiglpr.cpp:37 msgid "Spooler" msgstr "Ғалтак" #: lpr/kmconfiglpr.cpp:34 msgid "Spooler Settings" msgstr "Параметрҳои ғалтак " #: lpr/kmlprmanager.cpp:289 msgid "The printcap file is a remote file (NIS). It cannot be written." msgstr "" "Файли printcap - файли (NIS) ҳузфшуда низ мебошад. Ин файл навишта нахоҳад шуд." #: lpr/kmlprmanager.cpp:305 msgid "" "Unable to save printcap file. Check that you have write permissions for that " "file." msgstr "" "Наметавонам файли printcap-ро нигоҳ дорам. Мутмаъин бошед, ки дар ин файл " "навиштаҷот вуҷуд мебошад." #: lpr/kmlprmanager.cpp:330 msgid "Internal error: no handler defined." msgstr "Хатои дохилӣ: handler муайян нашудааст." #: lpr/kmlprmanager.cpp:344 msgid "Couldn't determine spool directory. See options dialog." msgstr "" "Наметавонам каталоги ғалтакро муайян намоям. наметавонад. Ба диалоги интихобот " "назар афканед." #: lpr/kmlprmanager.cpp:350 msgid "" "Unable to create the spool directory %1. Check that you have the required " "permissions for that operation." msgstr "" "Қодир ба сохтани каталоги ғалтаки %1 нестам. Мутмаъин бошед, ки худ ҳуқуқи " "дархост барои иҷрои ин амал, доред." #: lpr/kmlprmanager.cpp:382 #, c-format msgid "" "The printer has been created but the print daemon could not be restarted. %1" msgstr "" "Чопгарро сохта шуд, лекин daemon-и чопгар низ аз сари нав оғоз нахоҳад шуд. %1" #: lpr/kmlprmanager.cpp:410 msgid "" "Unable to remove spool directory %1. Check that you have write permissions for " "that directory." msgstr "" "Қодир ба ҳузфи каталоги ғалтаки %1 нестам. Мутмаъин бошед, ки дар ин каталог " "навиштаҷот вуҷуд мебошад." #: lpr/kmlprmanager.cpp:458 msgid "&Edit printcap Entry..." msgstr "&Тағйири қайди printcap..." #: lpr/kmlprmanager.cpp:473 msgid "" "Editing a printcap entry manually should only be done by confirmed system " "administrator. This may prevent your printer from working. Do you want to " "continue?" msgstr "" "Тасҳеҳи қайди printcap ба воситаи дастӣ метавонад танҳо бо мудирони системавии " "таҷрибанок низ иҷро шавад. Ин метавонад кори чопгарро вайрон кунад. Шумо " "мехоҳед давом диҳед?" #: lpr/kmlprmanager.cpp:489 #, c-format msgid "Spooler type: %1" msgstr "Намуди ғалтак: %1" #: lpr/matichandler.cpp:82 msgid "Network printer" msgstr "Чопгари шабақа" #: lpr/lprhandler.cpp:81 lpr/matichandler.cpp:86 #, c-format msgid "Local printer on %1" msgstr "Чопгари локалӣ дар %1" #: lpr/matichandler.cpp:245 msgid "Internal error." msgstr "Хатои дохилӣ." #: cups/kmcupsmanager.cpp:634 lpr/matichandler.cpp:254 #: lpr/matichandler.cpp:358 msgid "" "Unable to find the executable foomatic-datafile in your PATH. Check that " "Foomatic is correctly installed." msgstr "" "Наметавонам файли иҷрошавандаи foomatic-datafile-ро дар роҳе, ки бо PATH-и " "дабдилӣ насб шудааст, ёбам. Мутмаъин бошед, ки Foomatic дуруст насб шудааст." #: cups/kmcupsmanager.cpp:666 lpr/matichandler.cpp:286 #: lpr/matichandler.cpp:405 msgid "" "Unable to create the Foomatic driver [%1,%2]. Either that driver does not " "exist, or you don't have the required permissions to perform that operation." msgstr "" "Драйвери Foomatic [%1,%2]-ро сохта нашуда истодааст. Ёки драйвер вуҷуд надорад, " "ё ин ки шумо иҷозати кофӣ нодоред барои анҷом додани ин амал." #: lpr/matichandler.cpp:339 msgid "" "You probably don't have the required permissions to perform that operation." msgstr "Мумкин аст ки шумо иҷозати кофӣ надоред барои анҷом додани ин амал." #: lpr/apshandler.cpp:215 lpr/lprhandler.cpp:127 lpr/lprngtoolhandler.cpp:276 #: lpr/matichandler.cpp:421 #, c-format msgid "Unsupported backend: %1." msgstr "Backend-и ғайримадад: %1" #: lpr/matichandler.cpp:426 msgid "" "Unable to find executable lpdomatic. Check that Foomatic is correctly installed " "and that lpdomatic is installed in a standard location." msgstr "" "Қодир ба ёфтани барномаи lpdomatic нестам.Мутмаъин бошед, ки Foomatic дуруст " "сабт шудааст ва lpdomatic дар ҷои стандартӣ низ ҷойгир аст." #: lpr/matichandler.cpp:457 #, c-format msgid "Unable to remove driver file %1." msgstr "Қодир ба ҳузфи файли драйвери %1 нестам." #: lpr/editentrydialog.cpp:40 msgid "Aliases:" msgstr "Тахаллус:" #: lpr/editentrydialog.cpp:46 management/kxmlcommanddlg.cpp:107 msgid "String" msgstr "Сатр" #: lpr/editentrydialog.cpp:47 msgid "Number" msgstr "Рақам" #: lpr/editentrydialog.cpp:48 management/kxmlcommanddlg.cpp:111 msgid "Boolean" msgstr "Boolean" #: kpgeneralpage.cpp:417 lpd/lpdtools.cpp:39 lpr/editentrydialog.cpp:50 msgid "Enabled" msgstr "Фаъол аст" #: lpr/editentrydialog.cpp:72 #, c-format msgid "Printcap Entry: %1" msgstr "Қайди Printcap: %1" #: lpr/lprhandler.cpp:59 lpr/lprhandler.cpp:97 msgid "Unknown (unrecognized entry)" msgstr "Ношинос (қайди ношинохта)" #: lpr/lprhandler.cpp:67 lpr/lprhandler.cpp:91 msgid "Remote queue (%1) on %2" msgstr "Навбати ҳузфшуда (%1) дар %2" #: lpr/apshandler.cpp:112 lpr/lprhandler.cpp:74 lpr/lprngtoolhandler.cpp:72 msgid "Network printer (%1)" msgstr "Чопгари шабақа (%1)" #: lpr/lprhandler.cpp:104 lpr/lprhandler.cpp:110 lpr/lprhandler.cpp:116 msgid "Unrecognized entry." msgstr "Қайди ношинохта." #: lpr/lprngtoolhandler.cpp:99 msgid "IFHP Driver (%1)" msgstr "Драйвери IFHP (%1)" #: lpr/lprngtoolhandler.cpp:99 lpr/lprngtoolhandler.cpp:170 msgid "unknown" msgstr "ношинос" #: lpr/lprngtoolhandler.cpp:162 msgid "No driver defined for that printer. It might be a raw printer." msgstr "" "Барои ин чопгар, драйвер муайян нашудааст. Мумкин ин чопгари \"заҳ\" низ бошад." #: lpr/lprngtoolhandler.cpp:170 msgid "LPRngTool Common Driver (%1)" msgstr "Драйвери умумии LPRngTool (%1)" #: lpr/apshandler.cpp:258 lpr/apshandler.cpp:289 lpr/lprngtoolhandler.cpp:323 #, c-format msgid "Invalid printer backend specification: %1" msgstr "Хатои таснифоти backend-и чопгар: %1" #: lpr/lpchelper.cpp:235 lpr/lpchelper.cpp:273 lpr/lpchelper.cpp:291 #: lpr/lpchelper.cpp:314 msgid "The executable %1 couldn't be found in your PATH." msgstr "Барномаи %1 дар роҳе, ки PATH-и табдилӣ сабт шуда буд, ёфт нашуд." #: lpr/lpchelper.cpp:256 lpr/lpchelper.cpp:280 lpr/lpchelper.cpp:298 msgid "Permission denied." msgstr "Ҳуқуқи даромадан манъ аст." #: lpr/lpchelper.cpp:259 msgid "Printer %1 does not exist." msgstr "Чопгари %1 вуҷуд надорад." #: lpr/lpchelper.cpp:263 #, c-format msgid "Unknown error: %1" msgstr "Хатои номуайян: %1" #: lpr/lpchelper.cpp:282 #, c-format msgid "Execution of lprm failed: %1" msgstr "Хатои иҷро намудани lprm: %1" #: lpr/apshandler.cpp:68 msgid "APS Driver (%1)" msgstr "Драйвери APS (%1)" #: lpr/apshandler.cpp:221 #, c-format msgid "Unable to create directory %1." msgstr "Қодир ба сохтани каталоги %1 нестам." #: lpr/apshandler.cpp:241 #, c-format msgid "Missing element: %1." msgstr "Элемент роҳ дода шуд: %1." #: lpr/apshandler.cpp:264 lpr/apshandler.cpp:295 lpr/apshandler.cpp:367 #, c-format msgid "Unable to create the file %1." msgstr "Натавонистам файли %1-ро бисозам." #: lpr/apshandler.cpp:322 msgid "The APS driver is not defined." msgstr "Драйвери APS муайян нашудааст." #: lpr/apshandler.cpp:380 #, c-format msgid "Unable to remove directory %1." msgstr "Натавонистам каталоги %1-ро нест намоям." #: kpdriverpage.cpp:30 management/kmpropdriver.cpp:54 msgid "Driver Settings" msgstr "Танзимотгоҳи Драйвер" #: kpdriverpage.cpp:48 #, fuzzy msgid "" "Some options selected are in conflict. You must resolve these conflicts " "before continuing. See Driver Settings tab for detailed information." msgstr "" "Якеи аз интихоботгоҳҳои интихобшуда низ бо ҳамдигар низоъ мекунанд. Ин " "низоъҳоро пеш аз давом диҳӣ дур кунед," "
Барои ахборотҳои иловагӣ, замимаи Иловагӣ-ро бубинед." #: posterpreview.cpp:115 #, fuzzy msgid "" "Poster preview not available. Either the poster " "executable is not properly installed, or you don't have the required version" msgstr "" "Намоиши постер дастрас намебошад. Ёки барномаи poster " "сабт нашудааст, ёки сабт шудаасту лекин на он раванд." #: cups/kptextpage.cpp:195 kpmarginpage.cpp:42 kpmarginpage.cpp:45 msgid "Margins" msgstr "Лабаҳо" #: cups/kmpropusers.cpp:38 cups/kmwusers.cpp:39 msgid "Users" msgstr "Истифодакунандаҳо" #: cups/kmpropusers.cpp:39 cups/kmwusers.cpp:36 msgid "Users Access Settings" msgstr "Танзимоти истифодакунанда барои дастрасӣ" #: cups/kmpropusers.cpp:55 msgid "Denied users" msgstr "Истифодакунандагони рад карда шуда" #: cups/kmpropusers.cpp:62 msgid "Allowed users" msgstr "Истифодакунандагони иҷозат додашуда" #: cups/kmpropusers.cpp:76 msgid "All users allowed" msgstr "Тамоми истифодакунандагон низ иҷозат дода шудаанд." #: cups/kptextpage.cpp:41 msgid "" " " "

Characters Per Inch

" "

This setting controls the horizontal size of characters when printing a text " "file.

" "

The default value is 10, meaning that the font is scaled in a way that 10 " "characters per inch will be printed.

" "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

    -o cpi=...          # example: \"8\" or \"12\"

" msgstr "" #: cups/kptextpage.cpp:55 msgid "" " " "

Lines Per Inch

" "

This setting controls the vertical size of characters when printing a text " "file.

" "

The default value is 6, meaning that the font is scaled in a way that 6 " "lines per inch will be printed.

" "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

    -o lpi=...         # example \"5\" or \"7\"

" msgstr "" #: cups/kptextpage.cpp:69 msgid "" " " "

Columns

" "

This setting controls how many columns of text will be printed on each page " "when. printing text files.

" "

The default value is 1, meaning that only one column of text per page will " "be printed.

" "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

    -o columns=...     # example: \"2\" or \"4\"

" msgstr "" #: cups/kptextpage.cpp:84 msgid " Preview icon changes when you turn on or off prettyprint. " msgstr "" #: cups/kptextpage.cpp:87 msgid "" " " "

Text Formats

" "

These settings control the appearance of text on printouts. They are only " "valid for printing text files or input directly through kprinter.

" "

Note: These settings have no effect whatsoever for other input " "formats than text, or for printing from applications such as the KDE Advanced " "Text Editor. (Applications in general send PostScript to the print system, and " "'kate' in particular has its own knobs to control the print output.

. " "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

     -o cpi=...         # example: \"8\" or \"12\"  "
"
     -o lpi=...         # example: \"5\" or \"7\"  "
"
     -o columns=...     # example: \"2\" or \"4\"

" msgstr "" #: cups/kptextpage.cpp:108 msgid "" " " "

Margins

" "

These settings control the margins of printouts on the paper. They are not " "valid for jobs originating from applications which define their own page " "layout internally and send PostScript to TDEPrint (such as KOffice or " "OpenOffice.org).

" "

When printing from KDE applications, such as KMail and Konqueror, or " "printing an ASCII text file through kprinter, you can choose your preferred " "margin settings here.

" "

Margins may be set individually for each edge of the paper. The combo box at " "the bottom lets you change the units of measurement between Pixels, " "Millimeters, Centimeters, and Inches.

" "

You can even use the mouse to grab one margin and drag it to the intended " "position (see the preview picture on the right side).

" "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

     -o page-top=...      # example: \"72\"  "
"
     -o page-bottom=...   # example: \"24\"  "
"
     -o page-left=...     # example: \"36\"  "
"
     -o page-right=...    # example: \"12\"

" msgstr "" #: cups/kptextpage.cpp:134 msgid "" " " "

Turn Text Printing with Syntax Highlighting (Prettyprint) On!

" "

ASCII text file printouts can be 'prettyfied' by enabling this option. If " "you do so, a header is printed at the top of each page. The header contains " "the page number, job title (usually the filename), and the date. In addition, C " "and C++ keywords are highlighted, and comment lines are italicized.

" "

This prettyprint option is handled by CUPS.

" "

If you prefer another 'plaintext-to-prettyprint' converter, look for the " "enscript pre-filter on the Filters tab.

" "
" "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

     -o prettyprint=true.

" msgstr "" #: cups/kptextpage.cpp:153 msgid "" " " "

Turn Text Printing with Syntax Highlighting (Prettyprint) Off!

" "

ASCII text file printing with this option turned off are appearing without a " "page header and without syntax highlighting. (You can still set the page " "margins, though.)

" "
" "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

    -o prettyprint=false

" msgstr "" #: cups/kptextpage.cpp:167 msgid "" " " "

Print Text with Syntax Highlighting (Prettyprint)

" "

ASCII file printouts can be 'prettyfied' by enabling this option. If you do " "so, a header is printed at the top of each page. The header contains the page " "number, job title (usually the filename), and the date. In addition, C and C++ " "keywords are highlighted, and comment lines are italicized.

" "

This prettyprint option is handled by CUPS.

" "

If you prefer another 'plaintext-to-prettyprint' converter, look for the " "enscript pre-filter on the Filters tab.

" "
" "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

     -o prettyprint=true.  "
"
     -o prettyprint=false

" msgstr "" #: cups/kptextpage.cpp:188 msgid "Text" msgstr "Матн" #: cups/kptextpage.cpp:191 msgid "Text Format" msgstr "Андозаи матн" #: cups/kptextpage.cpp:193 msgid "Syntax Highlighting" msgstr "Аз таг равшан намудани синтаксис" #: cups/kptextpage.cpp:200 msgid "&Chars per inch:" msgstr "&Ишораҳо ба дюйм:" #: cups/kptextpage.cpp:204 msgid "&Lines per inch:" msgstr "&Сатр ба дюйм:" #: cups/kptextpage.cpp:208 msgid "C&olumns:" msgstr "С&утунҳо:" #: cups/kptextpage.cpp:216 msgid "&Disabled" msgstr "&Ғайри фаъол" #: cups/kptextpage.cpp:218 msgid "&Enabled" msgstr "&Фаъол" #: cups/kmconfigcups.cpp:32 msgid "CUPS Server" msgstr "Сервери CUPS" #: cups/kmconfigcups.cpp:33 msgid "CUPS Server Settings" msgstr "Параметрҳои сервери CUPS" #: cups/kphpgl2page.cpp:33 msgid "" " Print in Black Only (Blackplot) " "

The 'blackplot' option specifies that all pens should plot in black-only: " "The default is to use the colors defined in the plot file, or the standard pen " "colors defined in the HP-GL/2 reference manual from Hewlett Packard.

" "
" "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

    -o blackplot=true

" msgstr "" #: cups/kphpgl2page.cpp:48 msgid "" " Scale Print Image to Page Size " "

The 'fitplot' option specifies that the HP-GL image should be scaled to fill " " exactly the page with the (elsewhere selected) media size.

" "

The default is 'fitplot is disabled'. The default will therefore use the " "absolute distances specified in the plot file. (You should be aware that HP-GL " "files are very often CAD drawings intended for large format plotters. On " "standard office printers they will therefore lead to the drawing printout " "being spread across multiple pages.)

" "

Note:This feature depends upon an accurate plot size (PS) command in " "the HP-GL/2 file. If no plot size is given in the file the filter converting " "the HP-GL to PostScript assumes the plot is ANSI E size.

" "
" "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

     -o fitplot=true

" msgstr "" #: cups/kphpgl2page.cpp:68 msgid "" " Set Pen Width for HP-GL (if not defined in file). " "

The pen width value can be set here in case the original HP-GL file does not " "have it set. The pen width specifies the value in micrometers. The default " "value of 1000 produces lines that are 1000 micrometers == 1 millimeter in " "width. Specifying a pen width of 0 produces lines that are exactly 1 pixel " "wide.

" "

Note: The penwidth option set here is ignored if the pen widths are " "set inside the plot file itself..

" "
" "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

    -o penwidth=...   # example: \"2000\" or \"500\"

" msgstr "" #: cups/kphpgl2page.cpp:85 msgid "" " HP-GL Print Options " "

All options on this page are only applicable if you use TDEPrint to send " "HP-GL and HP-GL/2 files to one of your printers.

" "

HP-GL and HP-GL/2 are page description languages developed by " "Hewlett-Packard to drive Pen Plotting devices.

" "

TDEPrint can (with the help of CUPS) convert the HP-GL file format and print " "it on any installed printer.

" "

Note 1: To print HP-GL files, start 'kprinter' and simply load the " "file into the running kprinter.

" "

Note 2: The 'fitplot' parameter provided on this dialog does also " "work for printing PDF files (if your CUPS version is more recent than " "1.1.22).

" "
" "
" "

Additional hint for power users: These TDEPrint GUI elements " "match with CUPS commandline job option parameters: " "

     -o blackplot=...  # examples: \"true\" or \"false\"  "
"
     -o fitplot=...    # examples: \"true\" or \"false\"  "
"
     -o penwidth=...   # examples: \"true\" or \"false\"

" msgstr "" #: cups/kphpgl2page.cpp:113 msgid "HP-GL/2 Options" msgstr "Параметрҳои HP-GL/2" #: cups/kphpgl2page.cpp:115 msgid "&Use only black pen" msgstr "&Танҳо қалами сиёҳро истифода кунед" #: cups/kphpgl2page.cpp:118 msgid "&Fit plot to page" msgstr "&Саҳифаро ҷо кунед." #: cups/kphpgl2page.cpp:122 msgid "&Pen width:" msgstr "&Паҳмии қалам:" #: cups/kmwippselect.cpp:38 msgid "Remote IPP Printer Selection" msgstr "Интихоби чопгари шабакаи IPP" #: cups/kmwippselect.cpp:51 msgid "You must select a printer." msgstr "Ягон чопгарро ишора намудан лозим аст!" #: cups/kmcupsuimanager.cpp:87 msgid "" "" "

Print queue on remote CUPS server

" "

Use this for a print queue installed on a remote machine running a CUPS " "server. This allows to use remote printers when CUPS browsing is turned off.

" "" msgstr "" " " "

Чоп кардани саф дар сервери дури CUPS

" "

Инро барои чоп кардани, ки дар дури мошинкоркунии сервери CUPS барқарор " "шудааст, истифода баред. Ин истифода бурдани дури чопгариҳо вақте, ки баррасии " "CUPS кушта мешавад, иҷозат медиҳад.

" #: cups/kmcupsuimanager.cpp:94 msgid "" "" "

Network IPP printer

" "

Use this for a network-enabled printer using the IPP protocol. Modern " "high-end printers can use this mode. Use this mode instead of TCP if your " "printer can do both.

" msgstr "" " " "

Шабакаи чопгари IPP

Ин барои шабакаи-ҳалкунии истифодабарии " "протоколи IPP истифода бурда мешавад. Модерни баланд-паст барои ин метод " "истифода бурда мешаванд. Ин методро ба ивази TCP истифода бар агар чопгар " "ҳардӯяшро ҳал кунад.

" #: cups/kmcupsuimanager.cpp:101 msgid "" "" "

Fax/Modem printer

" "

Use this for a fax/modem printer. This requires the installation of the fax4CUPS " "backend. Documents sent on this printer will be faxed to the given target fax " "number.

" msgstr "" "" "

Факси/Модеми чопгар

" "

Инро барои факс/модеми чопгар. Ин гузориши факси4CUPS " "ба қафо овардани охирро талаб мекунад. Ҳуҷҷатҳое, ки ба ин чопгар фиристонида " "мешаванд, ба рақами адреси факс, факс карда мешаванд.

" #: cups/kmcupsuimanager.cpp:108 msgid "" "" "

Other printer

" "

Use this for any printer type. To use this option, you must know the URI of " "the printer you want to install. Refer to the CUPS documentation for more " "information about the printer URI. This option is mainly useful for printer " "types using 3rd party backends not covered by the other possibilities.

" msgstr "" "" "

Чопгари дигар

" "

Ин барои чопи чопгар истифода бурда мешавад. Истифода бурдани ин параметр " "шумо бояд донед, ки чопгари URI барқарор бояд кунед. Барои ахбороти зиёд дар " "бораи чопгпри URL ба санадсозии CUPS муроҷият кунед. Ин параметр бисёртар барои " "чопи чопгар,ки дар тарафи 3юми охири қафо аз як имкониятҳои дигар пӯшонида " "мешавад.

" #: cups/kmcupsuimanager.cpp:116 msgid "" "" "

Class of printers

" "

Use this to create a class of printers. When sending a document to a class, " "the document is actually sent to the first available (idle) printer in the " "class. Refer to the CUPS documentation for more information about class of " "printers.

" msgstr "" "" "

Синфи чопгарҳо

" "

Инро барои сохтани синфи чопгарҳо истифода баред. Вақте, ки санадро ба синф " "фиристондан, санад амалан ба чопгари аввали дастрас (беҳуда) дар синф, " "мефиристонад.Барои ахбороти зиёд дар бораи синфи чопгарҳо ба санадсозии CUPS " "муроҷият кунед.

" #: cups/kmcupsuimanager.cpp:129 msgid "Re&mote CUPS server (IPP/HTTP)" msgstr "Сер&вери ҳузф шудаи CUPS (IPP/HTTP)" #: cups/kmcupsuimanager.cpp:130 msgid "Network printer w/&IPP (IPP/HTTP)" msgstr "Чопгари шабақа бо &IPP (IPP/HTTP)" #: cups/kmcupsuimanager.cpp:131 msgid "S&erial Fax/Modem printer" msgstr "Намуди чопгари &Факс/Модем" #: cups/kmcupsuimanager.cpp:132 msgid "Other &printer type" msgstr "Намуди &дигари чопгар" #: cups/kmcupsuimanager.cpp:134 msgid "Cl&ass of printers" msgstr "Синфи &чопгарҳо" #: cups/kmcupsuimanager.cpp:190 #, fuzzy msgid "An error occurred while retrieving the list of available backends:" msgstr "Мавриди қабул намудани рӯйхати чопгарҳо, хатогӣ рӯй дод:" #: cups/kmcupsuimanager.cpp:236 msgid "Priority" msgstr "Пешгузорӣ" #: cups/kmcupsuimanager.cpp:238 msgid "Billing Information" msgstr "Маълумот дар бораи арзиш" #: cups/kmconfigcupsdir.cpp:34 msgid "Folder" msgstr "Папка" #: cups/kmconfigcupsdir.cpp:35 msgid "CUPS Folder Settings" msgstr "Танзими папкаи CUPS" #: cups/kmconfigcupsdir.cpp:38 msgid "Installation Folder" msgstr "Папкаи танзимот" #: cups/kmconfigcupsdir.cpp:41 msgid "Standard installation (/)" msgstr "Сабт намудани стандартии (/)" #: cups/kmwusers.cpp:41 msgid "Allowed Users" msgstr "Истифодакунандагони иҷозат дода шуда" #: cups/kmwusers.cpp:42 msgid "Denied Users" msgstr "Истифодакунандагони рад карда шуда" #: cups/kmwusers.cpp:44 msgid "Define here a group of allowed/denied users for this printer." msgstr "" "Гурӯҳи аз истифодакунандагони иҷозат/рад карда шударо барои ин чопгар, дар ин " "ҷо муайян кунед." #: cups/kmwusers.cpp:45 management/kxmlcommanddlg.cpp:117 msgid "&Type:" msgstr "&Намуд:" #: cups/cupsaddsmb2.cpp:55 cups/cupsaddsmb2.cpp:363 msgid "&Export" msgstr "&Содирот" #: cups/cupsaddsmb2.cpp:61 #, fuzzy msgid "Export Printer Driver to Windows Clients" msgstr "Содироти драйвери чопгар барои клиентҳои Windows" #: cups/cupsaddsmb2.cpp:72 msgid "&Username:" msgstr "&Номи истифодакунанда:" #: cups/cupsaddsmb2.cpp:73 msgid "&Samba server:" msgstr "&Сервери Samba:" #: cups/cupsaddsmb2.cpp:74 management/kmwpassword.cpp:50 msgid "&Password:" msgstr "&Гузарвожа:" #: cups/cupsaddsmb2.cpp:79 msgid "" "

Samba server

Adobe Windows PostScript driver files plus the CUPS " "printer PPD will be exported to the [print$] " "special share of the Samba server (to change the source CUPS server, use the " "Configure Manager -> CUPS server first). The " "[print$] share must exist on the Samba side prior to clicking the " "Export button below." msgstr "" "

Коргузори Samba

Файлҳои роҳандози Adobe Windows PostScript-ро ба " "иловаи PPD-и чопгари CUPS ва боиштироки махсуси [чоп$]" ", ба коргузори Samba содир мешаванд (барои тағйири коргузори манбаъи CUPS, " "аввал аз Мудири танзими -> коргузори CUPS " "низ истифода кунед). Иштироки [чоп$] бояд қабл аз пахши рӯи кнопкаи " "Содир дар поён низ вуҷуд дошта бошад." #: cups/cupsaddsmb2.cpp:88 msgid "" "

Samba username

User needs to have write access to the " "[print$] share on the Samba server. [print$] " "holds printer drivers prepared for download to Windows clients. This dialog " "does not work for Samba servers configured with security = share " "(but works fine with security = user)." msgstr "" "

Номи корбари Samba

Корбар бояд дастрасии навиштан ба иштироки " "[чоп$]-и коргузори Samba дошта бошад.[чоп$] " "роҳандозҳои чопгарро омода барои боргирӣ аз тарафи коргирҳои Windows низ нигоҳ " "медорад. Ин муҳовара барои коргузорони Samba-и танзим шуда бо " "амният = иштирок кор нахоҳад кард (вале бо амният = корбар " "кор мекунад)." #: cups/cupsaddsmb2.cpp:96 msgid "" "

Samba password

The Samba setting encrypt passwords = yes " "(default) requires prior use of smbpasswd -a [username] " "command, to create an encrypted Samba password and have Samba recognize it." msgstr "" "

Вожаи рамзи Samba

Танзими Samba-и рамзинасозии вожаҳои рамз = " "бале (пешфарз) бо истифода аз фармони smbpasswd -a [username] " "барои эҷоди вожаи рамзи рамзинашуда ва шиносонидани он ба Samba низдорад." #: cups/cupsaddsmb2.cpp:267 #, c-format msgid "Creating folder %1" msgstr "Сохтани папкаи %1" #: cups/cupsaddsmb2.cpp:275 #, c-format msgid "Uploading %1" msgstr "Пурбор кардани %1" #: cups/cupsaddsmb2.cpp:283 #, c-format msgid "Installing driver for %1" msgstr "Драйвер барои %1 танзим шуда истодааст" #: cups/cupsaddsmb2.cpp:291 #, c-format msgid "Installing printer %1" msgstr "Чопгари %1 танзим шуда истодааст" #: cups/cupsaddsmb2.cpp:333 msgid "Driver successfully exported." msgstr "Драйвер бо муваффақият содир шуд." #: cups/cupsaddsmb2.cpp:343 msgid "" "Operation failed. Possible reasons are: permission denied or invalid Samba " "configuration (see cupsaddsmb " "manual page for detailed information, you need " "CUPS version 1.1.11 or higher). You may want to try again with another " "login/password." msgstr "" "Нуқсони амалиёт низ рӯй дод. Сабабҳои эҳтимолӣ: иҷозат рад шуд бо танзимоти " "Samba-и нодуруст (барои иттилооти аниқ бештар муроҷиат кунед ба сафҳоти " "роҳнамои cupsaddsmb шумо ниёз ба CUPS ва ба нусхаи 1.1.11 ё болотар низ доред). " "Мумкин аст бихоҳед бо вориди/вожаи рамзи дигаре имтиҳон кунед." #: cups/cupsaddsmb2.cpp:352 msgid "Operation aborted (process killed)." msgstr "Амалиёт канда шуд (пардозиш кушта шуд)." #: cups/cupsaddsmb2.cpp:358 msgid "

Operation failed.

%1

" msgstr "

Амалиётро ба кор бурда нашуд!

%1

" #: cups/cupsaddsmb2.cpp:373 msgid "" "You are about to prepare the %1 driver to be shared out to Windows " "clients through Samba. This operation requires the " "Adobe PostScript Driver, a recent version of Samba 2.2.x and a running SMB " "service on the target server. Click Export to start the operation. Read " "the cupsaddsmb manual page in Konqueror or type " "man cupsaddsmb in a console window to learn more about this " "functionality." msgstr "" "Шумо дар остонаи он ҳастед ки роҳандози %1-ро барои клиентҳои Windows аз " "тариқи Samba ба иштирокӣ бигузоред. Ин амал ба роҳандозии " "Adobe PostScript, 2.2.x нусхаи наве аз Samba ва сервиси омодаи SMB рӯи " "мақсуд дорад. Барои Konqueror бихонед ё дар тирезаи поёнаи" "man cupsaddsmb -ро таҳрир кунед то дар мавриди амалкардаҳои ин бештар " "биёмӯзед." #: cups/cupsaddsmb2.cpp:393 msgid "" "Some driver files are missing. You can get them on Adobe web site. See cupsaddsmb manual page for more details (you need " "CUPS version 1.1.11 or higher)." msgstr "" "Якчанд драйвер мавҷуд намебошад. Шумо метавонед ин драйверҳоро аз адресҳои Adobe. " "cupsaddsmb CUPS " "ривояти 1.1.11 дастрас кунед." #: cups/cupsaddsmb2.cpp:404 #, c-format msgid "Preparing to upload driver to host %1" msgstr "Дар ҳоли омода шудан барои пурборкунии драйвер ба сервери %1" #: cups/cupsaddsmb2.cpp:409 management/networkscanner.cpp:149 msgid "&Abort" msgstr "&Буриш" #: cups/cupsaddsmb2.cpp:415 msgid "The driver for printer %1 could not be found." msgstr "Драйвер барои чопгари %1 ёфт нахоҳад шуд." #: cups/cupsaddsmb2.cpp:455 #, c-format msgid "Preparing to install driver on host %1" msgstr "Тайёрӣ ба сабт намудани драйвер ба сервери %1" #: cups/kmwquota.cpp:46 msgid "second(s)" msgstr "сония(ҳо)" #: cups/kmwquota.cpp:47 msgid "minute(s)" msgstr "дақиқа(ҳо)" #: cups/kmwquota.cpp:48 msgid "hour(s)" msgstr "соат(ҳо)" #: cups/kmwquota.cpp:49 msgid "day(s)" msgstr "рӯз(ҳо)" #: cups/kmwquota.cpp:50 msgid "week(s)" msgstr "ҳафта(ҳо)" #: cups/kmwquota.cpp:51 msgid "month(s)" msgstr "моҳ(ҳо)" #: cups/kmwquota.cpp:79 msgid "Printer Quota Settings" msgstr "Танзимоти саҳми чопгар " #: cups/kmpropquota.cpp:78 cups/kmwquota.cpp:84 msgid "No quota" msgstr "Бе саҳм" #: cups/kmpropquota.cpp:79 cups/kmpropquota.cpp:80 cups/kmwquota.cpp:87 #: cups/kmwquota.cpp:90 msgid "None" msgstr "Не" #: cups/kmpropquota.cpp:39 cups/kmwquota.cpp:96 msgid "&Period:" msgstr "&Марҳила:" #: cups/kmpropquota.cpp:40 cups/kmwquota.cpp:97 msgid "&Size limit (KB):" msgstr "&Маҳдудияти андоза (Kб):" #: cups/kmpropquota.cpp:41 cups/kmwquota.cpp:98 msgid "&Page limit:" msgstr "&Маҳдудияти саҳифа:" #: cups/kmwquota.cpp:104 msgid "" "

Set here the quota for this printer. Using limits of 0 " "means that no quota will be used. This is equivalent to set quota period to " "No quota (-1). Quota limits are defined on a per-user base and " "applied to all users.

" msgstr "" "

Дар инҷо саҳмияе барои ин чопгар. Истифодаи маҳдудияти 0" ", маънои онро дорад, ки саҳмиятҳо истифода нахоҳанд шуд. Марҳилаи саҳмият дар " "асоси истифодабарӣ низ муайян мешаванд ва ба тамомиистифодакунандагон ба кор " "бурда мешавад.

" #: cups/kmwquota.cpp:130 msgid "You must specify at least one quota limit." msgstr "Шумо бояд ягон саҳмияте ишора намоед!" #: cups/kmcupsconfigwidget.cpp:65 msgid "Server Information" msgstr "Ахборот дар бораи Сервер" #: cups/kmcupsconfigwidget.cpp:66 msgid "Account Information" msgstr "Ахбороти ин шумора" #: cups/kmcupsconfigwidget.cpp:67 rlpr/kmproxywidget.cpp:34 msgid "&Host:" msgstr "&Сервер:" #: cups/kmcupsconfigwidget.cpp:68 management/kmwsocketutil.cpp:53 #: management/networkscanner.cpp:339 rlpr/kmproxywidget.cpp:35 msgid "&Port:" msgstr "&Порт:" #: cups/kmcupsconfigwidget.cpp:75 msgid "&User:" msgstr "&Истифодакунанда:" #: cups/kmcupsconfigwidget.cpp:76 msgid "Pass&word:" msgstr "Гузар&вожа:" #: cups/kmcupsconfigwidget.cpp:79 msgid "&Store password in configuration file" msgstr "&Дар файли танзимии гузарвожа нигоҳ доред" #: cups/kmcupsconfigwidget.cpp:81 msgid "Use &anonymous access" msgstr "Бо истифода &аз дастраси анонимӣ" #: cups/kpschedulepage.cpp:40 #, fuzzy msgid "" " " "

Print Job Billing and Accounting

" "

Insert a meaningful string here to associate the current print job with a " "certain account. This string will appear in the CUPS \"page_log\" to help with " "the print accounting in your organization. (Leave it empty if you do not need " "it.) " "

It is useful for people who print on behalf of different \"customers\", " "like print service bureaux, letter shops, press and prepress companies, or " "secretaries who serve different bosses, etc.

" "
" "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

    -o job-billing=...         # example: \"Marketing_Department\" or "
"\"Joe_Doe\"

" msgstr "" " " "

Барқарор кардани банди пурмаъни дар ин ҷо пайваст кардани ҷараёни кори " "чопкунӣ бо ҳисоботи муайян. Ин банд дар CUPS \"қайди_саҳифа\" ёри кардан бо чоп " "кардани ҳисобот дар ташкили шумо. (Инро холӣ мон агар ба ту даркор набод.) " "

Ин барои одамоне,ки ҳархел чоп мекунанд \"мизоҷон\", мисли бюрои сервери " "чопкунӣ, мағозаҳои хат, пресса ва ташкилотҳои пешпресса, ё котибаҳое, ки ба " "боссҳои ҳархела хизмат мекунад, ва ғайраҳоро. " #: cups/kpschedulepage.cpp:60 #, fuzzy msgid "" " " "

Scheduled Printing

" "

Scheduled printing lets you control the time of the actual printout, while " "you can still send away your job now and have it out of your way. " "

Especially useful is the \"Never (hold indefinitely)\" option. It allows " "you to park your job until a time when you (or a printer administrator) decides " "to manually release it. " "

This is often required in enterprise environments, where you normally are " "not allowed to directly and immediately access the huge production printers in " "your Central Repro Department. However it is okay to send jobs to the " "queue which is under the control of the operators (who, after all, need to make " "sure that the 10,000 sheets of pink paper which is required by the Marketing " "Department for a particular job are available and loaded into the paper " "trays).

" "
" "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

    -o job-hold-until=...      # example: \"indefinite\" or \"no-hold\"  "
"

" msgstr "" " " "

Нақшабандии чопкунӣ ба шумо идора кардани вақти воқеъӣ натиҷаи чопиро иҷозат " "медиҳад, ҳангоме,ки шумо ҳоло корҳои худатонро мефиристонедҳозир " "ва ҳамашро дар роҳат нигоҳ дор. " "

Ҳақиқатан муффид аст \"Ҳеҷвақт (нигоҳ доштани номуяйян)\" интихоб. Вай ба " "шумо нигоҳ доштани коратонро то вақте, ки (ё мудири чопгар) шумо, иҷро карда " "дастӣ ӯро озод кунад. " "

Ин борҳо барои соҳаи фанни атроф талаб карда мешавад, ки шумо ба онҷо ба " "осонӣ рост фавран дастёбӣ ба маҳсулоти калони чопгардҳо дар " "Маркази Тавлиди Дубора.Ҳарчанд ин хуб аст фиристонидани корҳо ба саф, ки " "аз тарафи операторҳо идора карда мешавад (вай, пеш аз ҳама, хотирҷамъ бошад,ки " "10,000 варақи саҳифаҳои ранги гулдор ки аз тарафи Департаменти Маркетинг талаб " "карда мешавад барои кори махсус фароҳам мебошанд ва ба табақи саҳифаҳо пур " "карда мешавад) ." #: cups/kpschedulepage.cpp:87 #, fuzzy msgid "" " " "

Page Labels

" "

Page Labels are printed by CUPS at the top and bottom of each page. They " "appear on the pages surrounded by a little frame box. " "

They contain any string you type into the line edit field.

" "
" "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

    -o page-label=\"...\"      # example: \"Company Confidential\"
" "

" msgstr "" " " "

Нишонаҳои Саҳифа аз тарафи CUPS дар аввал ва охири ҳар як саҳифа чоп карда " "мешавад. Онҳо дар ҳар саҳифа бо қутии чорчӯбаи хурд гирд карда шуда пайдо " "мешаванд. " "

Онҳо ҳар банде, ки шумо дар хати ҳафзи вироиш чоп кардед, дарбар дорад." #: cups/kpschedulepage.cpp:102 #, fuzzy msgid "" " " "

Job Priority

" "

Usually CUPS prints all jobs per queue according to the \"FIFO\" principle: " "First In, First Out. " "

The job priority option allows you to re-order the queue according to your " "needs. " "

It works in both directions: you can increase as well as decrease " "priorities. (Usually you can only control your own jobs). " "

Since the default job priority is \"50\", any job sent with, for example, " "\"49\" will be printed only after all those others have finished. Conversely, a " "\"51\" or higher priority job will go right to the top of a populated queue (if " "no other, higher prioritized one is present).

" "
" "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

    -o job-priority=...   # example: \"10\" or \"66\" or \"99\"
" "

" msgstr "" " " "

Баъзе вақт CUPS ҳамаи корҳои ҳар дафъ вобаста ба принсипи \"FIFO\" : " "Аввал Берун, Аввал Дарун. " "

Кори аввалияти параметр ба шумо бори дигар навбатро иҷозат дода вобаста " "чизе,ки ба ту даркор мешавад. " "

Вай бо ду тараф кор мекунад:шумо метавонед зиёд кунед аввалиятҳои " "камшударо.(Баъзевақт шумо фақат корҳои худро соҳибӣ кунед). " "

Аз вақте,ки кори имтиёзи зикр нагашта \"50\"мебошад, ягон кор фиристонида " "мешавад, мисол, \"49\" чоп карда мешавад фақат вақте,ки ҳамаи корҳои дигар ба " "анҷом мерасанд. Тағири \"51\" ё корҳои баланди имтиёзи рост ба сафи пуркардагон " "меравад (агар ягон кас нест, имтиёзи баланд намоиш дода мешавад)." #: cups/kpschedulepage.cpp:126 msgid "Advanced Options" msgstr "Параметрҳои иловагӣ" #: cups/kpschedulepage.cpp:137 msgid "Immediately" msgstr "Зуд" #: cups/kpschedulepage.cpp:138 msgid "Never (hold indefinitely)" msgstr "Ҳеҷ гоҳ (доим нигоҳ доред)" #: cups/kpschedulepage.cpp:139 msgid "Daytime (6 am - 6 pm)" msgstr "Вақти рӯзона (6 саҳар - 6 бегоҳӣ)" #: cups/kpschedulepage.cpp:140 msgid "Evening (6 pm - 6 am)" msgstr "Вақти бегоҳӣ (6 бегоҳӣ - 6 саҳар)" #: cups/kpschedulepage.cpp:141 msgid "Night (6 pm - 6 am)" msgstr "Шабона (6 бегоҳӣ - 6 саҳар)" #: cups/kpschedulepage.cpp:142 msgid "Weekend" msgstr "Рӯзи истироҳат" #: cups/kpschedulepage.cpp:143 msgid "Second Shift (4 pm - 12 am)" msgstr "Марҳилаи дуввум (16- 24 соат)" #: cups/kpschedulepage.cpp:144 msgid "Third Shift (12 am - 8 am)" msgstr "Марҳилаи саввум (0- 8 соат)" #: cups/kpschedulepage.cpp:145 msgid "Specified Time" msgstr "Вақти муайян" #: cups/kpschedulepage.cpp:160 #, fuzzy msgid "&Scheduled printing:" msgstr "&Чопро ба фардо мононед:" #: cups/kpschedulepage.cpp:163 msgid "&Billing information:" msgstr "&Маълумот дар бораи арзиш:" #: cups/kpschedulepage.cpp:166 msgid "T&op/Bottom page label:" msgstr "&Болоӣ/поёнии ярликҳои саҳифа:" #: cups/kpschedulepage.cpp:169 msgid "&Job priority:" msgstr "&Аввалияти масъала:" #: cups/kpschedulepage.cpp:200 msgid "The time specified is not valid." msgstr "Вақти нодурустеро нишон додааст." #: cups/kmpropquota.cpp:57 msgid "Quotas" msgstr "Саҳм" #: cups/kmpropquota.cpp:58 msgid "Quota Settings" msgstr "Танзимоти саҳм" #: cups/ippreportdlg.cpp:34 msgid "IPP Report" msgstr "Хабари IPP" #: cups/ippreportdlg.cpp:93 msgid "Internal error: unable to generate HTML report." msgstr "Хатои дохилӣ: наметавонам хабари HTML-ро эҷод намоям." #: cups/kmcupsmanager.cpp:819 msgid "Library cupsdconf not found. Check your installation." msgstr "Китобхонаи cupsdconf ёфт нашуд. Дастгоҳи худро бисанҷед." #: cups/kmcupsmanager.cpp:825 msgid "Symbol %1 not found in cupsdconf library." msgstr "Аломати %1, дар китобхонаи cupsdconf ёфт нашуд." #: cups/kmcupsmanager.cpp:920 msgid "&Export Driver..." msgstr "&Содироти драйвер..." #: cups/kmcupsmanager.cpp:922 #, fuzzy msgid "&Printer IPP Report" msgstr "&Хабар дар бораи чопгари IPP..." #: cups/kmcupsmanager.cpp:968 cups/kmwippprinter.cpp:218 #, c-format msgid "IPP Report for %1" msgstr "Хабари IPP барои %1" #: cups/kmcupsmanager.cpp:972 msgid "Unable to retrieve printer information. Error received:" msgstr "Хатогӣ мавриди гирифтани ахборот дар бораи чопгар. Хатогӣ қабул шуд:" #: cups/kmcupsmanager.cpp:985 #, fuzzy msgid "Server" msgstr "Сервер:" #: cups/kmcupsmanager.cpp:1025 #, c-format msgid "" "Connection to CUPS server failed. Check that the CUPS server is correctly " "installed and running. Error: %1." msgstr "" "Натавонистам бо сервери CUPS робита пайдо кунам. мутмаъин бошед, ки сервери " "CUPS дуруст танзим ва оғоз шудааст. Хатои: %1." #: cups/kmcupsmanager.cpp:1026 msgid "the IPP request failed for an unknown reason" msgstr "Дархости IPP бо хатогӣ ва бо сабаби номуайян ба итмом расид" #: cups/kmcupsmanager.cpp:1060 msgid "connection refused" msgstr "алоқа рад карда шуд." #: cups/kmcupsmanager.cpp:1063 msgid "host not found" msgstr "узел ёфт нашуд" #: cups/kmcupsmanager.cpp:1067 msgid "read failed (%1)" msgstr "" #: cups/kmcupsmanager.cpp:1071 #, fuzzy msgid "" "Connection to CUPS server failed. Check that the CUPS server is correctly " "installed and running. Error: %2: %1." msgstr "" "Натавонистам бо сервери CUPS робита пайдо кунам. мутмаъин бошед, ки сервери " "CUPS дуруст танзим ва оғоз шудааст. Хатои: %1." #: cups/ipprequest.cpp:164 msgid "You don't have access to the requested resource." msgstr "Шумо ба манбаъи дархост дастрас нестед." #: cups/ipprequest.cpp:167 msgid "You are not authorized to access the requested resource." msgstr "Шумо иҷозати дастрасӣ ба манбаъи дархостиро надоред." #: cups/ipprequest.cpp:170 msgid "The requested operation cannot be completed." msgstr "Амалиёти дархост итмом шуда наметавонад." #: cups/ipprequest.cpp:173 msgid "The requested service is currently unavailable." msgstr "Сервиси дархостӣ дар ин замон дастрас намебошад." #: cups/ipprequest.cpp:176 msgid "The target printer is not accepting print jobs." msgstr "Чопгари роҳнамо кори чопро дастгирӣ накарда истодааст." #: cups/ipprequest.cpp:313 msgid "" "Connection to CUPS server failed. Check that the CUPS server is correctly " "installed and running." msgstr "" "Пайвастагиро бо сервери CUPS насб карда нашуд. Мутмаъин бошед, ки сервери CUPS " "дуруст насб ва ба кор даромадааст." #: cups/ipprequest.cpp:316 msgid "The IPP request failed for an unknown reason." msgstr "Осиди IPP бо хатогӣ ва бо сабаби номуайян ба итмом расид." #: cups/ipprequest.cpp:461 msgid "Attribute" msgstr "Хусусият" #: cups/ipprequest.cpp:462 msgid "Values" msgstr "Аҳамиятҳо" #: cups/ipprequest.cpp:500 cups/ipprequest.cpp:567 msgid "True" msgstr "Саҳеҳ" #: cups/ipprequest.cpp:500 cups/ipprequest.cpp:567 msgid "False" msgstr "Дурӯғ" #: cups/kmwippprinter.cpp:45 msgid "IPP Printer Information" msgstr "Ахборот дар бораи чопгари IPP" #: cups/kmwippprinter.cpp:55 msgid "&Printer URI:" msgstr "&URI-и чопгар:" #: cups/kmwippprinter.cpp:64 msgid "" "

Either enter the printer URI directly, or use the network scanning " "facility.

" msgstr "" "

Ёки адреси чопгарро гузоред, ё инкисохтмони ҷустуҷӯии дар шабақа бударо " "истифода баред.

" #: cups/kmwippprinter.cpp:65 #, fuzzy msgid "&IPP Report" msgstr "Хабари IPP" #: cups/kmwippprinter.cpp:112 msgid "You must enter a printer URI." msgstr "Адреси чопгарро ишора намудан лозим аст!" #: cups/kmwippprinter.cpp:119 management/kmwsocket.cpp:117 msgid "No printer found at this address/port." msgstr "Ягон чопгар дар ин адрес/узел ёфт нашуд!" #: cups/kmwippprinter.cpp:139 management/kmwsocket.cpp:136 msgid "" "_: Unknown host - 1 is the IP\n" " (%1)" msgstr "Намуайян (%1)" #: cups/kmwippprinter.cpp:173 msgid "Name: %1
" msgstr "Ном: %1
" #: cups/kmwippprinter.cpp:174 msgid "Location: %1
" msgstr "Ҷойгиршавӣ: %1
" #: cups/kmwippprinter.cpp:175 msgid "Description: %1
" msgstr "Тасвирот: %1
" #: cups/kmwippprinter.cpp:182 msgid "Model: %1
" msgstr "Шакл: %1
" #: cups/kmwippprinter.cpp:187 kmprinter.cpp:139 msgid "Idle" msgstr "Интизорӣ" #: cups/kmwippprinter.cpp:188 kmprinter.cpp:141 msgid "Stopped" msgstr "Ҳисобот барҳам дода шуд" #: cups/kmwippprinter.cpp:189 kmjob.cpp:111 kmprinter.cpp:140 msgid "Processing..." msgstr "Коркард..." #: cups/kmwippprinter.cpp:190 kmjob.cpp:132 kmprinter.cpp:142 msgid "" "_: Unknown State\n" "Unknown" msgstr "Номуайян" #: cups/kmwippprinter.cpp:192 msgid "State: %1
" msgstr "Ҳолат: %1
" #: cups/kmwippprinter.cpp:199 #, c-format msgid "Unable to retrieve printer info. Printer answered:

%1" msgstr "Ягон ахбороте дар бораи чопгар гирифта нашуд. Ҷавоби чопгар:

%1" #: cups/kmwippprinter.cpp:222 msgid "Unable to generate report. IPP request failed with message: %1 (0x%2)." msgstr "" "Наметавонам гузоришро анҷом диҳам. Дархости IPP номуваффақ буд: %1 (0x%2)." #: cups/kmwother.cpp:41 msgid "URI Selection" msgstr "Интихоби URI" #: cups/kmwother.cpp:46 msgid "" "

Enter the URI corresponding to the printer to be installed. Examples:

" "
    " "
  • smb://[login[:passwd]@]server/printer
    • " "
  • lpd://server/queue
    • " "
  • parallel:/dev/lp0
" msgstr "" "

URI марбут ба чопгари насбӣ бударо ворид кунед. Мисол:

" "
    " "
  • smb://[login[:passwd]@]server/printer
    • " "
  • lpd://server/queue
    • " "
  • parallel:/dev/lp0
" #: cups/kmwother.cpp:51 management/kminfopage.cpp:52 #: management/kmpropbackend.cpp:35 management/kmwlocal.cpp:54 msgid "URI:" msgstr "URI:" #: cups/kmwother.cpp:78 msgid "CUPS Server %1:%2" msgstr "Сервери CUPS %1:%2" #: cups/kmpropbanners.cpp:35 cups/kmwbanners.cpp:92 msgid "&Starting banner:" msgstr "Лавҳи сурати &аввала:" #: cups/kmpropbanners.cpp:36 cups/kmwbanners.cpp:93 msgid "&Ending banner:" msgstr "&Ба итмом расидани лавҳи сурат:" #: cups/kmpropbanners.cpp:49 kpgeneralpage.cpp:298 msgid "Banners" msgstr "Лавҳаи суратҳо" #: cups/kmpropbanners.cpp:50 msgid "Banner Settings" msgstr "Танзимоти лавҳаи сурат" #: cups/kpimagepage.cpp:44 msgid "" " " "

Brightness: Slider to control the brightness value of all colors " "used.

" "

The brightness value can range from 0 to 200. Values greater than 100 will " "lighten the print. Values less than 100 will darken the print.

" "
" "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

    -o brightness=...      # use range from \"0\" to \"200\"

" "" msgstr "" #: cups/kpimagepage.cpp:58 msgid "" " " "

Hue (Tint): Slider to control the hue value for color rotation.

" "

The hue value is a number from -360 to 360 and represents the color hue " "rotation. The following table summarizes the change you will see for the base " "colors: " "

" "" " " " " " " "" " " " " " " "" " " " " " " "" " " " " " " "" " " " " " " "" " " " " " " "" " " " " "
Originalhue=-45hue=45
RedPurpleYellow-orange
GreenYellow-greenBlue-green
YellowOrangeGreen-yellow
BlueSky-bluePurple
MagentaIndigoCrimson
CyanBlue-greenLight-navy-blue
" "
" "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

    -o hue=...     # use range from \"-360\" to \"360\"

" msgstr "" #: cups/kpimagepage.cpp:83 msgid "" " " "

Saturation: Slider to control the saturation value for all colors " "used.

" "

The saturation value adjusts the saturation of the colors in an image, " "similar to the color knob on your television. The color saturation value.can " "range from 0 to 200. On inkjet printers, a higher saturation value uses more " "ink. On laserjet printers, a higher saturation uses more toner. A color " "saturation of 0 produces a black-and-white print, while a value of 200 will " "make the colors extremely intense.

" "
" "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

    -o saturation=...      # use range from \"0\" to \"200\"

" "" msgstr "" #: cups/kpimagepage.cpp:101 msgid "" " " "

Gamma: Slider to control the gamma value for color correction.

" "

The gamma value can range from 1 to 3000. A gamma values greater than 1000 " "lightens the print. A gamma value less than 1000 darken the print. The default " "gamma is 1000.

" "

Note:

the gamma value adjustment is not visible in the thumbnail " "preview.

" "
" "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

    -o gamma=...      # use range from \"1\" to \"3000\"

" "" msgstr "" #: cups/kpimagepage.cpp:118 msgid "" " " "

Image Printing Options

" "

All options controlled on this page only apply to printing images. Most " "image file formats are supported. To name a few: JPEG, TIFF, PNG, GIF, PNM " "(PBM/PGM/PNM/PPM), Sun Raster, SGI RGB, Windows BMP. Options to influence color " "output of image printouts are: " "

    " "
  • Brightness
    • " "
  • Hue
    • " "
  • Saturation
    • " "
  • Gamma
" "

For a more detailed explanation about Brightness, Hue, Saturation and Gamma " "settings, please look at the 'WhatsThis' items provided for these controls. " "

" msgstr "" #: cups/kpimagepage.cpp:136 msgid "" " " "

Coloration Preview Thumbnail

" "

The coloration preview thumbnail indicates change of image coloration by " "different settings. Options to influence output are: " "

    " "
  • Brightness
    • " "
  • Hue (Tint)
    • " "
  • Saturation
    • " "
  • Gamma

" "

For a more detailed explanation about Brightness, Hue, Saturation and Gamma " "settings, please look at the 'WhatsThis' items provided for these controls. " "

" msgstr "" #: cups/kpimagepage.cpp:152 msgid "" " " "

Image Size: Dropdown menu to control the image size on the printed " "paper. Dropdown works in conjunction with slider below. Dropdown options " "are:.

" "
    " "
  • Natural Image Size: Image prints in its natural image size. If it " "does not fit onto one sheet, the printout will be spread across multiple " "sheets. Note, that the slider is disabled when selecting 'natural image size' " "in the dropdown menu.
    • " "
  • Resolution (ppi): The resolution value slider covers a number range " "from 1 to 1200. It specifies the resolution of the image in Pixels Per Inch " "(PPI). An image that is 3000x2400 pixels will print 10x8 inches at 300 pixels " "per inch, for example, but 5x4 inches at 600 pixels per inch. If the specified " "resolution makes the image larger than the page, multiple pages will be " "printed. Resolution defaults to 72 ppi.
    • " "
  • % of Page Size: The percent value slider covers numbers from 1 to " "800. It specifies the size in relation to the page (not the image). A scaling " "of 100 percent will fill the page as completely as the image aspect ratio " "allows (doing auto-rotation of the image as needed). A scaling of more than " "100 will print the image across multiple sheets. A scaling of 200 percent will " "print on up to 4 pages.
    • Scaling in % of page size defaults to 100 %. " "
  • % of Natural Image Size: The percent value slider moves from 1 to " "800. It specifies the printout size in relation to the natural image size. A " "scaling of 100 percent will print the image at its natural size, while a " "scaling of 50 percent will print the image at half its natural size. If the " "specified scaling makes the image larger than the page, multiple pages will be " "printed. Scaling in % of natural image size defaults to 100 %.
" "
" "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

     -o natural-scaling=...     # range in  %  is 1....800  "
"
     -o scaling=...             # range in  %  is 1....800  "
"
     -o ppi=...                 # range in ppi is 1...1200

" "" msgstr "" #: cups/kpimagepage.cpp:192 msgid "" " " "

Position Preview Thumbnail

" "

This position preview thumbnail indicates the position of the image on the " "paper sheet. " "

Click on horizontal and vertical radio buttons to move image alignment on " "paper around. Options are: " "

    " "
  • center
    • " "
  • top
    • " "
  • top-left
    • " "
  • left
    • " "
  • bottom-left
    • " "
  • bottom
    • " "
  • bottom-right
    • " "
  • right
    • " "
  • top-right

" msgstr "" #: cups/kpimagepage.cpp:210 msgid "" " " "

Reset to Default Values

" "

Reset all coloration settings to default values. Default values are: " "

    " "
  • Brightness: 100
    • " "
  • Hue (Tint). 0
    • " "
  • Saturation: 100
    • " "
  • Gamma: 1000

" msgstr "" #: cups/kpimagepage.cpp:222 msgid "" " " "

Image Positioning:

" "

Select a pair of radiobuttons to move image to the position you want on the " "paper printout. Default is 'center'.

" "
" "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

    -o position=...       # examples: \"top-left\" or \"bottom\"
" "

" msgstr "" #: cups/kpimagepage.cpp:237 msgid "Image" msgstr "Тасвирот" #: cups/kpimagepage.cpp:239 msgid "Color Settings" msgstr "Танзимоти ранг" #: cups/kpimagepage.cpp:241 msgid "Image Size" msgstr "Андозаи тасвирот" #: cups/kpimagepage.cpp:243 msgid "Image Position" msgstr "Ҳолати тасвирот" #: cups/kpimagepage.cpp:247 msgid "&Brightness:" msgstr "&Равшанӣ:" #: cups/kpimagepage.cpp:252 msgid "&Hue (Color rotation):" msgstr "&Навъи ранг (Тартиботи ранг):" #: cups/kpimagepage.cpp:257 msgid "&Saturation:" msgstr "&Ғализӣ:" #: cups/kpimagepage.cpp:262 msgid "&Gamma (Color correction):" msgstr "&Гамма (коррексияи ранг):" #: cups/kpimagepage.cpp:283 msgid "&Default Settings" msgstr "&Параметрҳои пешфарз" #: cups/kpimagepage.cpp:289 msgid "Natural Image Size" msgstr "Андозаи тасвироти натуралӣ" #: cups/kpimagepage.cpp:290 msgid "Resolution (ppi)" msgstr "Иҷозат (нуқта дар дюйм)" #: cups/kpimagepage.cpp:292 #, no-c-format msgid "% of Page" msgstr "% саҳифа" #: cups/kpimagepage.cpp:294 #, no-c-format msgid "% of Natural Image Size" msgstr "% андозаи натуралӣ" #: cups/kpimagepage.cpp:304 msgid "&Image size type:" msgstr "&Намуди андозаи тасвирот:" #: cups/kmcupsjobmanager.cpp:349 msgid "Job Report" msgstr "Шарҳи масъала" #: cups/kmcupsjobmanager.cpp:351 cups/kmcupsjobmanager.cpp:456 msgid "Unable to retrieve job information: " msgstr "Хатогӣ мавриди гирифтани ахборот дар бораи масъала:" #: cups/kmcupsjobmanager.cpp:360 #, fuzzy msgid "&Job IPP Report" msgstr "&Шарҳи масъалаи IPP..." #: cups/kmcupsjobmanager.cpp:362 msgid "&Increase Priority" msgstr "&Вусъати приоритет" #: cups/kmcupsjobmanager.cpp:364 msgid "&Decrease Priority" msgstr "&Коҳиши приоритет" #: cups/kmcupsjobmanager.cpp:366 msgid "&Edit Attributes..." msgstr "&Тағйири хусусиятҳои..." #: cups/kmcupsjobmanager.cpp:419 msgid "Unable to change job priority: " msgstr "Наметавонам приоритети масъаларо тағйир диҳам:" #: cups/kmcupsjobmanager.cpp:477 #, c-format msgid "Unable to find printer %1." msgstr "Қодир ба ҷустуҷӯи чопгари %1 нестам." #: cups/kmcupsjobmanager.cpp:494 msgid "Attributes of Job %1@%2 (%3)" msgstr "Хусусиятҳои масъалаи %1@%2 (%3)" #: cups/kmcupsjobmanager.cpp:516 msgid "Unable to set job attributes: " msgstr "Қодир ба танзими хусусиятҳои масъала нестам:" #: cups/kmwipp.cpp:35 msgid "Remote IPP server" msgstr "Сервери шабақавии IPP" #: cups/kmwipp.cpp:39 msgid "" "

Enter the information concerning the remote IPP server owning the targeted " "printer. This wizard will poll the server before continuing.

" msgstr "" "

Ахбороте дар бораи сервери IPP ворид кунед, ки дар он чопгар кор карда " "истода бошад. Корбар пеш аз давом додани кор серверро хоҳад пурсид.

" #: cups/kmwipp.cpp:42 management/kmwlpd.cpp:46 rlpr/kmproprlpr.cpp:34 #: rlpr/kmwrlpr.cpp:62 msgid "Host:" msgstr "Сервер:" #: cups/kmwipp.cpp:43 msgid "Port:" msgstr "Порт:" #: cups/kmwipp.cpp:52 management/kmwsmb.cpp:79 msgid "Empty server name." msgstr "Номи сервер ишора нашудааст." #: cups/kmwipp.cpp:59 msgid "Incorrect port number." msgstr "Рақами порт нодуруст аст!" #: cups/kmwipp.cpp:72 msgid "Unable to connect to %1 on port %2 ." msgstr "" "Натавонистам бо %1 дар порти %2 пайваст шавам!" #: cups/kptagspage.cpp:36 msgid "" " " "

Additional Tags

You may send additional commands to the CUPS " "server via this editable list. There are 3 purposes for this: " "
    " "
  • Use any current or future standard CUPS job option not supported by the " "TDEPrint GUI.
    • " "
  • Control any custom job option you may want to support in custom CUPS " "filters and backends plugged into the CUPS filtering chain.
    • " "
  • Send short messages to the operators of your production printers in your " "Central Repro Department.
" "

Standard CUPS job options: A complete list of standard CUPS job " "options is in the CUPS User Manual" ". Mappings of the kprinter user interface widgets to respective CUPS job " "option names are named in the various WhatsThis help items..

" "

Custom CUPS job options: CUPS print servers may be customized with " "additional print filters and backends which understand custom job options. You " "can specify such custom job options here. If in doubt, ask your system " "administrator..

" "

" "

Operator Messages: You may send additional messages to the " "operator(s) of your production printers (e.g. in your " "Central Repro Department

) Messages can be read by the operator(s) (or " "yourself) by viewing the \"Job IPP Report\" for the job.

" "Examples:" "
" "
 A standard CUPS job option:"
"
    (Name) number-up                -- (Value) 9                     "
"
 "
"
 A job option for custom CUPS filters or backends:"
"
    (Name) DANKA_watermark          -- "
"(Value) Company_Confidential   "
"
 "
"
 A message to the operator(s):"
"
    (Name) Deliver_after_completion -- "
"(Value) to_Marketing_Departm."
"
" "

Note: the fields must not include spaces, tabs or quotes. You may " "need to double-click on a field to edit it. " "

Warning: Do not use such standard CUPS option names which also can be " "used through the TDEPrint GUI. Results may be unpredictable if they conflict, " " or if they are sent multiple times. For all options supported by the GUI, " "please do use the GUI. (Each GUI element's 'WhatsThis' names the related CUPS " "option name.)

" msgstr "" #: cups/kptagspage.cpp:77 msgid "Additional Tags" msgstr "Аломатҳои иловагӣ" #: cups/kptagspage.cpp:82 kpfilterpage.cpp:406 management/kmjobviewer.cpp:237 #: management/kmwend.cpp:51 management/kxmlcommanddlg.cpp:141 #: management/kxmlcommanddlg.cpp:545 tdefilelist.cpp:101 msgid "Name" msgstr "Ном" #: cups/kptagspage.cpp:83 msgid "Value" msgstr "Аҳамият" #: cups/kptagspage.cpp:92 msgid "Read-Only" msgstr "Танҳо-хондан" #: cups/kptagspage.cpp:115 #, fuzzy msgid "The tag name must not contain any spaces, tabs or quotes: %1." msgstr "Номи tag бояд бе фосила бошад: %1." #: cups/kmwbanners.cpp:57 msgid "No Banner" msgstr "Бидуни лавҳи сурат" #: cups/kmwbanners.cpp:58 msgid "Classified" msgstr "Ба гурӯҳҳо тақсим шудан" #: cups/kmwbanners.cpp:59 msgid "Confidential" msgstr "Пинҳонӣ" #: cups/kmwbanners.cpp:60 msgid "Secret" msgstr "Сир" #: cups/kmwbanners.cpp:61 msgid "Standard" msgstr "Стандартӣ" #: cups/kmwbanners.cpp:62 msgid "Top Secret" msgstr "Сири махсус" #: cups/kmwbanners.cpp:63 msgid "Unclassified" msgstr "Ба гурӯҳҳо тақсим нашудан" #: cups/kmwbanners.cpp:86 msgid "Banner Selection" msgstr "Интихоби лавҳи сурат" #: cups/kmwbanners.cpp:99 msgid "" "

Select the default banners associated with this printer. These banners will " "be inserted before and/or after each print job sent to the printer. If you " "don't want to use banners, select No Banner.

" msgstr "" "

Лавҳаи сурати пешфарзро барои ин чопгар низ интихоб кунед. Онҳо қабл ва " "баъди ҳар як масъалаи ба чопгар фиристодаро хоҳад гузошт. Агар шумо қатъан " "нахоҳед онҳоро истифода кунед, бидуни лавҳаи сурат-ро интихоб кунед.

" #: cups/kmwfax.cpp:39 msgid "Fax Serial Device" msgstr "Раванди дастгоҳи факс" #: cups/kmwfax.cpp:43 msgid "

Select the device which your serial Fax/Modem is connected to.

" msgstr "

Дастгоҳе интихоб кунед, ки бо он Факс/Модем ҳамроҳ бошад.

" #: cups/kmwfax.cpp:81 msgid "You must select a device." msgstr "Дастгоҳеро ишора намудан лозим аст." #: foomatic/kfoomaticprinterimpl.cpp:51 lpdunix/klpdunixprinterimpl.cpp:72 msgid "" "No valid print executable was found in your path. Check your installation." msgstr "Қодир ба ҷустуҷӯи барномаи чоп нестам. Дастгоҳро биозмоед." #: foomatic/kmfoomaticmanager.cpp:70 msgid "This is not a Foomatic printer" msgstr "Ин чопгар, чопгари Foomatic намебошад" #: foomatic/kmfoomaticmanager.cpp:75 msgid "Some printer information are missing" msgstr "Якхел ахборотҳо дар бораи чопгар роҳ дода шудааст" #: kmmanager.cpp:70 msgid "This operation is not implemented." msgstr "Амалиёт дастгирӣ нашуда истодааст." #: kmmanager.cpp:169 msgid "Unable to locate test page." msgstr "Қодир ба боз кардани саҳифаи тафтишот нестам." #: kmmanager.cpp:449 msgid "Can't overwrite regular printer with special printer settings." msgstr "" "Наметавонам танзимотҳои махсуси чопгарро аз болои чопгари стандартӣ бознависӣ " "кунам." #: kmmanager.cpp:478 #, c-format msgid "Parallel Port #%1" msgstr "Порти параллелии #%1" #: kmmanager.cpp:486 kmmanager.cpp:502 kxmlcommand.cpp:661 #, c-format msgid "Unable to load TDE print management library: %1" msgstr "Натавонистам китобхонаи коркарди чопи TDE-ро пурбор кунам: %1TDE" #: kmmanager.cpp:491 kxmlcommand.cpp:669 msgid "Unable to find wizard object in management library." msgstr "Натавонистам устодро дар китобхонаи коркарди чоп ёбам." #: kmmanager.cpp:507 msgid "Unable to find options dialog in management library." msgstr "Натавонистам диалоги параметрҳоро дар китобхонаи идоракунӣ ёбам." #: kmmanager.cpp:534 msgid "No plugin information available" msgstr "Иттилооте дар бораи plugin нест" #: kprintpreview.cpp:140 msgid "Do you want to continue printing anyway?" msgstr "Шумо ҳақиқатан мехоҳед чопро давом диҳед?" #: kprintpreview.cpp:148 kprintpreview.cpp:227 msgid "Print Preview" msgstr "Пешнамоиш" #: kprintpreview.cpp:278 msgid "" "The preview program %1 cannot be found. Check that the program is correctly " "installed and located in a directory included in your PATH environment " "variable." msgstr "" "Барномаи пешнамоиши %1-ро ёфта натавонистам. Мутмаъин бошед, ки барнома дуруст " "танзим шудааст ва дар каталоге, ки дар гуногуноти атрофи PATH дохил шудааст, " "воқеъ мебошад." #: kprintpreview.cpp:303 msgid "" "Preview failed: neither the internal TDE PostScript viewer (KGhostView) nor any " "other external PostScript viewer could be found." msgstr "" "Нуқсони намоиш: натавонистам на барномаи дохилиро (KGhostView) на ягон барномаи " "намоишоти берунии PostScript ёбам." #: kprintpreview.cpp:307 #, c-format msgid "" "Preview failed: TDE could not find any application to preview files of type %1." msgstr "" "Хатои пешнамоиш: TDE ягон барнома борои пешнамоишоти файлҳои намуди %1-ро ёфта " "натавонист." #: kprintpreview.cpp:317 #, c-format msgid "Preview failed: unable to start program %1." msgstr "Хатои пешнамоиш: натавонистам барномаи %1-ро оғоз диҳам." #: kprintpreview.cpp:322 msgid "Do you want to continue printing?" msgstr "Чопро давом диҳам?" #: marginwidget.cpp:37 msgid "" " " "

Top Margin

. " "

This spinbox/text edit field lets you control the top margin of your " "printout if the printing application does not define its margins internally. " "

" "

The setting works for instance for ASCII text file printing, or for printing " "from KMail and and Konqueror..

" "

Note:

This margin setting is not intended for KOffice or " "OpenOffice.org printing, because these applications (or rather their users) " "are expected to do it by themselves. It also does not work for PostScript or " "PDF file, which in most cases have their margins hardcoded internally.

" "
" "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

    -o page-top=...      # use values from \"0\" or higher. \"72\" is "
"equal to 1 inch.

" msgstr "" #: marginwidget.cpp:57 msgid "" " " "

Bottom Margin

. " "

This spinbox/text edit field lets you control the bottom margin of your " "printout if the printing application does not define its margins internally. " "

" "

The setting works for instance for ASCII text file printing, or for printing " "from KMail and and Konqueror.

" "

Note:

This margin setting is not intended for KOffice or " "OpenOffice.org printing, because these applications (or rather their users) " "are expected to do it by themselves. It also does not work for PostScript or " "PDF file, which in most cases have their margins hardcoded internally.

" "
" "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

    -o page-bottom=...      # use values from \"0\" or higher. \"72\" is "
"equal to 1 inch.
" msgstr "" #: marginwidget.cpp:76 msgid "" " " "

Left Margin

. " "

This spinbox/text edit field lets you control the left margin of your " "printout if the printing application does not define its margins internally. " "

" "

The setting works for instance for ASCII text file printing, or for printing " "from KMail and and Konqueror.

" "

Note:

This margin setting is not intended for KOffice or " "OpenOffice.org printing, because these applications (or rather their users) " "are expected to do it by themselves. It also does not work for PostScript or " "PDF file, which in most cases have their margins hardcoded internally.

" "
" "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

    -o page-left=...      # use values from \"0\" or higher. \"72\" is "
"equal to 1 inch.
" msgstr "" #: marginwidget.cpp:95 msgid "" " " "

Right Margin

. " "

This spinbox/text edit field lets you control the right margin of your " "printout if the printing application does not define its margins internally. " "

" "

The setting works for instance for ASCII text file printing, or for printing " "from KMail and and Konqueror.

" "

Note:

This margin setting is not intended for KOffice or " "OpenOffice.org printing, because these applications (or rather their users) " "are expected to do it by themselves. It also does not work for PostScript or " "PDF file, which in most cases have their margins hardcoded internally.

" "
" "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

    -o page-right=...      # use values from \"0\" or higher. \"72\" is "
"equal to 1 inch.
" msgstr "" #: marginwidget.cpp:114 msgid "" " " "

Change Measurement Unit

. " "

You can change the units of measurement for the page margins here. Select " "from Millimeter, Centimeter, Inch or Pixels (1 pixel == 1/72 inch).

" msgstr "" #: marginwidget.cpp:121 msgid "" " " "

Custom Margins Checkbox

. " "

Enable this checkbox if you want to modify the margins of your printouts " "

You can change margin settings in 4 ways: " "

    " "
  • Edit the text fields.
    • " "
  • Click spinbox arrows.
    • " "
  • Scroll wheel of wheelmouses.
    • " "
  • Drag margins in preview frame with mouse.
Note: " "The margin setting does not work if you load such files directly into " "kprinter, which have their print margins hardcoded internally, like as most " "PDF or PostScript files. It works for all ASCII text files however. It also may " "not work with non-TDE applications which fail to fully utilize the TDEPrint " "framework, such as OpenOffice.org.

" msgstr "" #: marginwidget.cpp:138 msgid "" " " "

\"Drag-your-Margins\"

. " "

Use your mouse to drag and set each margin on this little preview window. " "

" msgstr "" #: marginwidget.cpp:148 msgid "&Use custom margins" msgstr "&Лабаҳои ғайристандартӣ" #: marginwidget.cpp:158 msgid "&Top:" msgstr "&Аз боло:" #: marginwidget.cpp:159 msgid "&Bottom:" msgstr "&Аз поён:" #: marginwidget.cpp:160 msgid "Le&ft:" msgstr "&Аз чап:" #: marginwidget.cpp:161 msgid "&Right:" msgstr "&Аз рост:" #: marginwidget.cpp:164 msgid "Pixels (1/72nd in)" msgstr "Пикселҳо (1/72 дюйм)" #: marginwidget.cpp:167 msgid "Inches (in)" msgstr "Дюймҳо (in)" #: marginwidget.cpp:168 msgid "Centimeters (cm)" msgstr "Сантиметрҳо (см)" #: marginwidget.cpp:169 msgid "Millimeters (mm)" msgstr "Миллиметрҳо (мм)" #: kprinterimpl.cpp:156 msgid "Cannot copy multiple files into one file." msgstr "Наметавонам файли зиёдеро дар як файл, нусха бибардорам." #: kprinterimpl.cpp:165 msgid "Cannot save print file to %1. Check that you have write access to it." msgstr "" "Таметавонам файли чопкуниро дар %1 нигоҳ дорам. Мутмаъин бошед, ки он қайдро ба " "даст оварда бошад." #: kprinterimpl.cpp:233 #, c-format msgid "Printing document: %1" msgstr "Чопи санад: %1" #: kprinterimpl.cpp:251 #, c-format msgid "Sending print data to printer: %1" msgstr "Фиристодани маълумоте ба чопгари: %1" #: kprinterimpl.cpp:279 msgid "Unable to start child print process. " msgstr "Қодир ба оғози масъалаи чопи шаръие нестам." #: kprinterimpl.cpp:281 msgid "" "The TDE print server (tdeprintd) could not be contacted. Check that this " "server is running." msgstr "" "Натавонистам бо сервери чопии TDE (tdeprintd) пайваст шавам. Биозмоед, " "ки ин сервер ба кор даромадааст ё не." #: kprinterimpl.cpp:283 msgid "" "_: 1 is the command that is given to\n" "Check the command syntax:\n" "%1 " msgstr "" "Дурустии фармонро биозмоед:\n" "%1 <файлҳо>" #: kprinterimpl.cpp:290 msgid "No valid file was found for printing. Operation aborted." msgstr "Ягон файле барои чоп кардан нест. Барҳами амал." #: kprinterimpl.cpp:325 msgid "" "

Unable to perform the requested page selection. The filter psselect " "cannot be inserted in the current filter chain. See Filter " "tab in the printer properties dialog for further information.

" msgstr "" "

Қодир ба иҷрои интихоби саҳифаи дархост намебошам. Филтри psselect " "дар раванди қатори филтрҳо, монда нахоҳад шуд.Барои ахбороти иловагӣ, шумо " "метавонед дар поягузори Филтр,диалоги хусусиятҳои чопгарро бубинед.

" #: kprinterimpl.cpp:355 msgid "

Could not load filter description for %1.

" msgstr "" "

Хатогӣ мавриди хондани тасовироти филтр барои %1" ". Сатри фармонии холӣ қабул шуд." "

" #: kprinterimpl.cpp:371 msgid "" "

Error while reading filter description for %1" ". Empty command line received.

" msgstr "" "

Хатогӣ мавриди хондани тасовироти филтр барои %1" ". Сатри фармонии холӣ қабул шуд." "

" #: kprinterimpl.cpp:385 msgid "" "The MIME type %1 is not supported as input of the filter chain (this may happen " "with non-CUPS spoolers when performing page selection on a non-PostScript " "file). Do you want TDE to convert the file to a supported format?

" msgstr "" "Намуди MIME %1 ҳамчун формати ибтидоӣ барои қатори филтрҳо, дастрасӣ нахоҳад " "шуд. Ин мумкин бо фарқияти аз CUPS spooler-ҳо мавриди иҷрои интихоботгоҳи " "саҳифа дар файл, ки файли PostScript намебошанд, қарор хоҳад гирифт. TDE " "метавонад файлро дар формати дастгирӣ шуда истода табдил диҳад. Табдил " "диҳам?

" #: kprinterimpl.cpp:389 kprinterimpl.cpp:509 msgid "Convert" msgstr "Табдилдиҳӣ" #: kprinterimpl.cpp:399 msgid "Select MIME Type" msgstr "Интихоби Намуди MIME" #: kprinterimpl.cpp:400 msgid "Select the target format for the conversion:" msgstr "Барои диалог андозаи додашудае интихоб кунед:" #: kprinterimpl.cpp:404 kprinterimpl.cpp:430 msgid "Operation aborted." msgstr "Кори ин амал канда шуд." #: kprinterimpl.cpp:410 msgid "No appropriate filter found. Select another target format." msgstr "Филтри мувофиқе ёфт нашуд. Ягон дигар формати фазифаеро интихоб кунед." #: kprinterimpl.cpp:423 msgid "" "Operation failed with message:" "
%1" "
Select another target format." msgstr "" "Амалиёт бо хатогӣ ва бо иттилооти поёнбуда низ ба итмом расид:" "
%1" "
Ягон дигар формати фазифаеро интихоб кунед." #: kprinterimpl.cpp:441 msgid "Filtering print data" msgstr "Филтри додаҳои чоп" #: kprinterimpl.cpp:445 msgid "Error while filtering. Command was: %1." msgstr "Хатогӣ мавриди истифодаи филтр. Фармони:%1." #: kprinterimpl.cpp:487 msgid "The print file is empty and will be ignored:

%1

" msgstr "" "Файли чопкунӣ холӣ мебошад ва эътибор дода намешавад:" "

%1

" #: kprinterimpl.cpp:497 #, fuzzy msgid "" "The file format %1 is not directly supported by the current " "print system. You now have 3 options: " "
    " "
  • TDE can attempt to convert this file automatically to a supported format. " "(Select Convert)
    • " "
  • You can try to send the file to the printer without any conversion. " "(Select Keep)
    • " "
  • You can cancel the printjob. (Select Cancel)
" "Do you want TDE to attempt and convert this file to %2?" msgstr "" "Формати файли %1, дақиқ бо системаи чопи равон низ дастгирӣ нашуда истодааст. " "TDE метавонад кӯшиш кунад, ки худкорона файлро ба формати дастгиршаванда табдил " "диҳад. Лекин шумо то ҳол метавонед файлро ба чоп бидуни табдилдиҳӣ " "низбифиристед. Шумо ба TDE роҳ медиҳед, ки он ин файлро ба %2 табдил диҳад?" #: kprinterimpl.cpp:510 management/kmwname.cpp:62 msgid "Keep" msgstr "Нигоҳ доштан" #: kprinterimpl.cpp:518 msgid "" "No appropriate filter was found to convert the file format %1 into %2." "
" "
    " "
  • Go to System Options -> Commands to look through the list of " "possible filters. Each filter executes an external program.
    • " "
  • See if the required external program is available.on your system.
" "" msgstr "" #: tools/escputil/escpwidget.cpp:45 msgid "EPSON InkJet Printer Utilities" msgstr "Утилитҳои чопгари EPSON InkJet" #: tools/escputil/escpwidget.cpp:91 msgid "&Use direct connection (might need root permissions)" msgstr "&Бо истифода аз пайвастагии мустақим (мумкин ҳуқуқи root лозим шавад)" #: management/kmwsmb.cpp:46 tools/escputil/escpwidget.cpp:99 msgid "Printer:" msgstr "Чопгар:" #: management/kminfopage.cpp:54 management/kminfopage.cpp:93 #: tools/escputil/escpwidget.cpp:101 msgid "Device:" msgstr "Дастгоҳ:" #: tools/escputil/escpwidget.cpp:103 msgid "Clea&n print head" msgstr "&Ҷои хониши чопгарро тоза кунед" #: tools/escputil/escpwidget.cpp:104 msgid "&Print a nozzle test pattern" msgstr "&Чопи як алгӯи тестдиҳандаи чоп" #: tools/escputil/escpwidget.cpp:105 msgid "&Align print head" msgstr "&Рост намудани ҷои хониши чопгар" #: tools/escputil/escpwidget.cpp:106 msgid "&Ink level" msgstr "&Сатҳи ҷавҳар" #: tools/escputil/escpwidget.cpp:107 msgid "P&rinter identification" msgstr "Идентифи&катсияи чопгар" #: tools/escputil/escpwidget.cpp:153 msgid "Internal error: no device set." msgstr "Хатои дохилӣ: Дастгоҳ танзим нашудааст." #: tools/escputil/escpwidget.cpp:164 #, c-format msgid "Unsupported connection type: %1" msgstr "Навъи робитаи дастгирнашаванда: %1" #: tools/escputil/escpwidget.cpp:171 msgid "" "An escputil process is still running. You must wait until its completion before " "continuing." msgstr "" "Амали escputil то ҳол дар ҳоли иҷроист. Шумо бояд қабл аз идома мунтазари " "итмоми он шавед." #: tools/escputil/escpwidget.cpp:179 msgid "" "The executable escputil cannot be found in your PATH environment variable. Make " "sure gimp-print is installed and that escputil is in your PATH." msgstr "" "Наметавонам барномаи escputil-ро дар роҳи ҷустуҷӯӣ, ки бо PATH-и тағйирёбанда " "муайян шудааст, ёбам. Мутмаъин бошед, ки gimp-print танзим шудааст ва escputil " "дар роҳи ҷустуҷӯии PATH мебошад." #: tools/escputil/escpwidget.cpp:204 msgid "Internal error: unable to start escputil process." msgstr "Хатои дохилӣ: Наметавонам пардозиши escputil-ро шурӯъ намоям." #: tools/escputil/escpwidget.cpp:214 msgid "Operation terminated with errors." msgstr "Амалиёт бо хато ба итмом расид." #: kpfilterpage.cpp:409 tools/escputil/escpwidget.cpp:217 msgid "Output" msgstr "Хурӯҷ" #: kprintaction.cpp:117 kprintaction.cpp:122 kprintaction.cpp:127 msgid "&Export..." msgstr "&Содирот..." #: driver.cpp:385 foomatic2loader.cpp:268 msgid "Adjustments" msgstr "Баробаркунӣ" #: kmprinter.cpp:144 msgid "(rejecting jobs)" msgstr "(масъалаҳои барҳам дода шуда)" #: kmprinter.cpp:144 msgid "(accepting jobs)" msgstr "(кабули масъалаҳо)" #: management/kmmainview.cpp:72 msgid "" "The printer %1 already exists. Continuing will overwrite existing printer. Do " "you want to continue?" msgstr "" "Чопгари %1 аллакай вуҷуд дорад. Мавриди идома, танзимоти он аз нав нависта " "хоҳад шуд. Оё мехоҳед идома диҳед?" #: management/kmmainview.cpp:133 management/kmmainview.cpp:783 #: management/kmmainview.cpp:859 management/kmmainview.cpp:883 msgid "Initializing manager..." msgstr "Дар ҳоли роҳандозии мудир..." #: management/kmmainview.cpp:180 msgid "&Icons,&List,&Tree" msgstr "&Нишонаҳо,&рӯйхат,&дарахт" #: management/kmmainview.cpp:184 msgid "Start/Stop Printer" msgstr "Роҳандозӣ/таваққуфи чопгар" #: management/kmmainview.cpp:186 msgid "&Start Printer" msgstr "&Роҳандозии чопгар" #: management/kmmainview.cpp:187 msgid "Sto&p Printer" msgstr "&Боздоштани чопгар" #: management/kmmainview.cpp:189 msgid "Enable/Disable Job Spooling" msgstr "Фаъол/ғайрифаъол сохтани сафҳабанди масъалаҳо" #: management/kmmainview.cpp:191 msgid "&Enable Job Spooling" msgstr "&Иҷозат додани сафҳабандии корҳо" #: management/kmmainview.cpp:192 msgid "&Disable Job Spooling" msgstr "&Ғайрифаъол сохтани сафҳабандии корҳо" #: management/kmmainview.cpp:195 msgid "&Configure..." msgstr "&Танзимот..." #: management/kmmainview.cpp:196 msgid "Add &Printer/Class..." msgstr "&Иловаи чопгар/синф..." #: management/kmmainview.cpp:197 msgid "Add &Special (pseudo) Printer..." msgstr "Иловаи &(псевдо) чопгари махсус..." #: management/kmmainview.cpp:198 msgid "Set as &Local Default" msgstr "Танзимот ба унвони &пешфарзи локалӣ" #: management/kmmainview.cpp:199 msgid "Set as &User Default" msgstr "Танзимот ба унвони &пешфарзи корбар" #: management/kmmainview.cpp:200 msgid "&Test Printer..." msgstr "&Санҷиши чопгар..." #: management/kmmainview.cpp:201 msgid "Configure &Manager..." msgstr "Танзимоти &роҳбар..." #: management/kmmainview.cpp:202 msgid "Initialize Manager/&View" msgstr "Роҳандозии мудир/&намоиш" #: management/kmmainview.cpp:204 msgid "&Orientation" msgstr "&Ҷиҳат" #: management/kmmainview.cpp:207 msgid "&Vertical,&Horizontal" msgstr "&Амудӣ,&Уфуқӣ" #: management/kmmainview.cpp:211 msgid "R&estart Server" msgstr "&Серверро аз сари нав пурбор кунед" #: management/kmmainview.cpp:212 msgid "Configure &Server..." msgstr "Танзимоти &сервер..." #: management/kmmainview.cpp:213 #, fuzzy msgid "Configure Server Access..." msgstr "Танзимоти &сервер..." #: management/kmmainview.cpp:216 msgid "Hide &Toolbar" msgstr "Намоиши &панели асбобҳо" #: management/kmmainview.cpp:218 msgid "Show Me&nu Toolbar" msgstr "Намоиши &панели меню" #: management/kmmainview.cpp:219 msgid "Hide Me&nu Toolbar" msgstr "Намоиши &панели меню" #: management/kmmainview.cpp:221 msgid "Show Pr&inter Details" msgstr "Намоиш/махфӣ кунонидани ҷузъиёти чоп&гар" #: management/kmmainview.cpp:222 msgid "Hide Pr&inter Details" msgstr "Намоиш/махфӣ кунонидани ҷузъиёти чоп&гар" #: management/kmmainview.cpp:226 msgid "Toggle Printer &Filtering" msgstr "Фаъол/ғайрифаъол намудани &софии чоп" #: management/kmmainview.cpp:230 msgid "Pri&nter Tools" msgstr "Хизматҳои &Чопгар" #: management/kmmainview.cpp:295 msgid "Print Server" msgstr "Сервери чоп" #: management/kmmainview.cpp:301 msgid "Print Manager" msgstr "Роҳбари чоп" #: management/kmmainview.cpp:334 msgid "An error occurred while retrieving the printer list." msgstr "Ҳангоми бозёфти саҳифаи чопгарҳо хатои рӯй дод." #: management/kmmainview.cpp:511 #, c-format msgid "Unable to modify the state of printer %1." msgstr "Наметавонам вазъияти чопгари %1-ро тағйир диҳам." #: management/kmmainview.cpp:522 msgid "Do you really want to remove %1?" msgstr "Оё воқеъан мехоҳед %1-ро нобуд кунед?" #: management/kmmainview.cpp:526 #, c-format msgid "Unable to remove special printer %1." msgstr "Чопгари махсусро нобуд карда нашуд %1." #: management/kmmainview.cpp:529 #, c-format msgid "Unable to remove printer %1." msgstr "Чопгарро нобуд карда нашуд %1." #: management/kmmainview.cpp:559 #, c-format msgid "Configure %1" msgstr "Танзими %1" #: management/kmmainview.cpp:566 #, c-format msgid "Unable to modify settings of printer %1." msgstr "Наметавонам танзимоти чопгари %1-ро таъғир диҳам." #: management/kmmainview.cpp:570 #, c-format msgid "Unable to load a valid driver for printer %1." msgstr "Наметавонам драйвери мӯътабарро барои чопгари %1 пурбор кунам." #: management/kmmainview.cpp:582 msgid "Unable to create printer." msgstr "Наметавонам чопгаре эҷод кунам." #: management/kmmainview.cpp:594 msgid "Unable to define printer %1 as default." msgstr "Наметавонам чопгари %1-ро ҳамчун пешфарз таъриф кунам." #: management/kminstancepage.cpp:265 management/kmmainview.cpp:629 msgid "You are about to print a test page on %1. Do you want to continue?" msgstr "" "Шумо омодаи чопи саҳифаи таҷрибавиро рӯи %1 мебошед. Оё мехоҳед давом диҳед?" #: management/kminstancepage.cpp:265 management/kmmainview.cpp:629 msgid "Print Test Page" msgstr "Чопи саҳифаи таҷрибавӣ" #: management/kminstancepage.cpp:270 management/kmmainview.cpp:632 #, c-format msgid "Test page successfully sent to printer %1." msgstr "Саҳифаи таҷрибавӣ бо муваффақият бароичопгари %1 ирсол шуд." #: management/kmmainview.cpp:634 #, c-format msgid "Unable to test printer %1." msgstr "Натавонистам чопгари %1-ро биозмоям." #: management/kmmainview.cpp:647 msgid "Error message received from manager:

%1

" msgstr "Пайёми хатои дарёфтии мудир:

%1

" #: management/kmmainview.cpp:649 msgid "Internal error (no error message)." msgstr "Хатои дохилӣ (бидуни пайёми хато)." #: management/kmmainview.cpp:667 msgid "Unable to restart print server." msgstr "Наметавонам коргузори чопро маҷдудан роҳандозӣ кунам." #: management/kmmainview.cpp:672 msgid "Restarting server..." msgstr "Дар ҳоли роҳандозии маҷдуди коргузор..." #: management/kmmainview.cpp:682 msgid "Unable to configure print server." msgstr "Наметавонам коргузори чопро танзим кунам." #: management/kmmainview.cpp:687 msgid "Configuring server..." msgstr "Танзими сервер..." #: management/kmmainview.cpp:842 msgid "" "Unable to start printer tool. Possible reasons are: no printer selected, the " "selected printer doesn't have any local device defined (printer port), or the " "tool library could not be found." msgstr "" "Натавонистам дастгоҳи чопгарро оғоз кунам. Мумкин сабаби ин: Ягон чопгаре ишора " "нашудааст, барои чопгари ишора шуда дастгоҳи локалӣ низ (даргоҳи чопгар) таъин " "нашудааст, ё китобхонаи лозимӣ низ ёфт нахоҳад шуд." #: management/kmmainview.cpp:866 msgid "Unable to retrieve the printer list." msgstr "Қодири қабул кардани рӯйхати чопгарҳо нестам." #: management/kminfopage.cpp:44 management/kmpropgeneral.cpp:38 msgid "" "_: Physical Location\n" "Location:" msgstr "Ҷойгиршавӣ" #: management/kminfopage.cpp:46 management/kmpropgeneral.cpp:39 #: management/kmwname.cpp:41 msgid "Description:" msgstr "Тасвирот:" #: management/kminfopage.cpp:56 msgid "Model:" msgstr "Модел:" #: management/kminfopage.cpp:92 msgid "Members:" msgstr "Узвҳо:" #: management/kminfopage.cpp:112 msgid "Implicit class" msgstr "Синфи ба таври ноошкор" #: management/kminfopage.cpp:114 msgid "Remote class" msgstr "Синфи шабақавӣ" #: management/kminfopage.cpp:115 msgid "Local class" msgstr "Синфи локалӣ" #: management/kminfopage.cpp:117 msgid "Remote printer" msgstr "Чопгари шабақавӣ" #: lpdunix/kmlpdunixmanager.cpp:222 lpdunix/kmlpdunixmanager.cpp:274 #: lpdunix/kmlpdunixmanager.cpp:320 lpdunix/kmlpdunixmanager.cpp:342 #: lpdunix/kmlpdunixmanager.cpp:382 management/kminfopage.cpp:118 msgid "Local printer" msgstr "Чопгари локалӣ" #: management/kminfopage.cpp:120 msgid "Special (pseudo) printer" msgstr "(псевдо) чопгари махсус" #: management/kminfopage.cpp:121 msgid "" "_: Unknown class of printer\n" "Unknown" msgstr "Ношинос" #: management/kmpropcontainer.cpp:35 msgid "Change..." msgstr "Дигаргун кунед..." #: management/kmwdrivertest.cpp:41 msgid "Printer Test" msgstr "Санҷиши чопгар" #: management/kmwdrivertest.cpp:51 msgid "Manufacturer:" msgstr "Тавлидкунанда:" #: management/kmwdrivertest.cpp:52 msgid "Model:" msgstr "Шакл:" #: management/kmwdrivertest.cpp:53 msgid "Description:" msgstr "Тасвир:" #: management/kmwdrivertest.cpp:55 msgid "&Test" msgstr "&Санҷидан" #: management/kmwdrivertest.cpp:59 msgid "" "

Now you can test the printer before finishing installation. Use the " "Settings button to configure the printer driver and the Test " "button to test your configuration. Use the Back " "button to change the driver (your current configuration will be discarded).

" msgstr "" "ш аз итмоми танзимот шумо метавонед чопгарро биозмоед. Кнопкаи Танзимотро " "истифода кунед барои танзими драйвери принтер ва кнопкаи Санҷиш " "барои санҷиши дурустии пайкарабанд.Кнопкаи Бозгашт" "-ро пахш кунед, барои тағйири драйвер (Пайкарбанди раванд гум хоҳад шуд).

" #: management/kmwdrivertest.cpp:117 msgid "Unable to load the requested driver:

%1

" msgstr "Қобили пурбор кардани драйвери лозимӣ нестам:

%1

" #: management/kmwdrivertest.cpp:146 msgid "" "Test page successfully sent to printer. Wait until printing is complete, then " "click the OK button." msgstr "" "Саҳифаи озмоида бомуваффақият ба чоп фиристода шуд. Итмоми чопро мунтазир шавед " "ва ба рӯи кнопкаи OK пахш кунед." #: management/kmwdrivertest.cpp:148 msgid "Unable to test printer: " msgstr "Хатои маврди озмоиши чопгар: " #: management/kmwdrivertest.cpp:150 msgid "Unable to remove temporary printer." msgstr "Қодир ба ҳузфи чопгари муваққатӣ нестам." #: management/kmwdrivertest.cpp:153 msgid "Unable to create temporary printer." msgstr "Қодир ба сохтани чопгари муваққатӣ нестам." #: management/kmjobviewer.cpp:101 management/kmjobviewer.cpp:158 msgid "No Printer" msgstr "Бидуни чопгар" #: management/kmjobviewer.cpp:138 management/kmjobviewer.cpp:177 #: management/kmjobviewer.cpp:194 management/kmjobviewer.cpp:210 #: management/kmjobviewer.cpp:356 management/kmjobviewer.cpp:543 msgid "All Printers" msgstr "Тамоми чопгарҳо" #: management/kmjobviewer.cpp:151 #, c-format msgid "Print Jobs for %1" msgstr "Масъалаи чопгар барои %1" #: management/kmjobviewer.cpp:170 management/kmjobviewer.cpp:172 #: management/kmjobviewer.cpp:336 #, c-format msgid "Max.: %1" msgstr "Maкс.: %1" #: management/kmconfigjobs.cpp:41 management/kmjobviewer.cpp:170 #: management/kmjobviewer.cpp:336 msgid "Unlimited" msgstr "Номаҳдуд" #: management/kmjobviewer.cpp:235 msgid "Job ID" msgstr "ID масъалаҳо" #: management/kmjobviewer.cpp:236 msgid "Owner" msgstr "Соҳиб" #: management/kmjobviewer.cpp:238 msgid "" "_: Status\n" "State" msgstr "Ҳолат" #: management/kmjobviewer.cpp:239 msgid "Size (KB)" msgstr "Андоза (Кб)" #: management/kmjobviewer.cpp:240 msgid "Page(s)" msgstr "Варақ(ҳо)" #: management/kmjobviewer.cpp:262 msgid "&Hold" msgstr "&Боздоштан" #: management/kmjobviewer.cpp:263 msgid "&Resume" msgstr "&Идома" #: management/kmjobviewer.cpp:264 #, fuzzy msgid "Remo&ve" msgstr "&Ҳузф намудан" #: management/kmjobviewer.cpp:265 msgid "Res&tart" msgstr "Аз &сари нав оғоз намудан" #: management/kmjobviewer.cpp:266 #, fuzzy msgid "&Move to Printer" msgstr "&Ба чопгар ҷойгир кардан..." #: management/kmjobviewer.cpp:272 msgid "&Toggle Completed Jobs" msgstr "Гузаронида&ни масъалаҳои иҷрошуда" #: management/kmjobviewer.cpp:275 msgid "Show Only User Jobs" msgstr "Танҳо масъалаҳои истифодакунандаро нишод диҳед" #: management/kmjobviewer.cpp:276 msgid "Hide Only User Jobs" msgstr "Танҳо масъалаҳои истифодакунандаро нишод диҳед" #: management/kmjobviewer.cpp:284 msgid "User Name" msgstr "Номи истифодакунанда" #: management/kmjobviewer.cpp:301 msgid "&Select Printer" msgstr "&Интихоби чопгар" #: management/kmjobviewer.cpp:330 msgid "Refresh" msgstr "Бозсозӣ кунед" #: management/kmjobviewer.cpp:334 msgid "Keep window permanent" msgstr "Доимо тирезаро нигоҳ дошта истед" #: management/kmjobviewer.cpp:479 msgid "" "Unable to perform action \"%1\" on selected jobs. Error received from manager:" msgstr "" "Қодир ба иҷро кардани амали \"%1\", мавриди масъалаҳои интихобшуда, нестам. Аз " "мудири корбар хатогӣ қабул шуд:" #: management/kmjobviewer.cpp:491 msgid "Hold" msgstr "Боздоштан" #: management/kmjobviewer.cpp:496 msgid "Resume" msgstr "Давом додан" #: management/kmjobviewer.cpp:506 msgid "Restart" msgstr "Аз сари нав оғоз кардан" #: management/kmjobviewer.cpp:514 #, c-format msgid "Move to %1" msgstr "Ба %1 ҷойгир кунед" #: management/kmjobviewer.cpp:674 msgid "Operation failed." msgstr "Нуқсони амалиёт." #: management/kmconfigjobs.cpp:34 management/kmjobviewer.cpp:699 msgid "Print Job Settings" msgstr "Танзимоти корҳои чоп" #: management/kmconfigcommand.cpp:33 msgid "Commands" msgstr "Фармонотҳо" #: management/kmconfigcommand.cpp:34 msgid "Command Settings" msgstr "Параметрҳои фармонот" #: management/kmconfigcommand.cpp:37 msgid "Edit/Create Commands" msgstr "Сохтани/тағйири фармонот" #: management/kmconfigcommand.cpp:39 msgid "" "

Command objects perform a conversion from input to output." "
They are used as the basis to build both print filters and special " "printers. They are described by a command string, a set of options, a set of " "requirements and associated mime types. Here you can create new command objects " "and edit existing ones. All changes will only be effective for you." msgstr "" "

Шайъи фармонҳо, тағйири дода шудаҳоро ба тарзи амал хоҳад кард." "
Онҳо ҳамчун асосе барои сохтани чопи филтрҳо ва чопгарҳои махсус низ " "истифода мешаванд. Онҳо ҳамчун сатри фармонӣ, набори параметрҳо, набори тақозо " "ва пайвастшавии намуди MIME низ тасовир мешаванд. Дар инҷо метавонед, шайъи " "фармони нав ва тағйиротивуҷуд бударо сабт кунед. Ҳамаи тағйиротҳо танҳо барои " "шумо муассир хоҳанд шуд." #: management/tdeprint_management_module.cpp:48 msgid "Select Command" msgstr "Интихоби фармонот" #: management/kmwbackend.cpp:54 msgid "Backend Selection" msgstr "Интихоби протоколи дараҷаи паст" #: management/kmwbackend.cpp:68 msgid "You must select a backend." msgstr "Шумо бояд протоколи дараҷаи пастро ишора кунед." #: management/kmwbackend.cpp:115 msgid "&Local printer (parallel, serial, USB)" msgstr "&Чопгари локалӣ (параллелӣ, пасраванда, USB)" #: management/kmwbackend.cpp:116 msgid "" "" "

Locally-connected printer

" "

Use this for a printer connected to the computer via a parallel, serial or " "USB port.

" msgstr "" "" "

Маҳалӣ-алоқакардашудаи чопгар

" "

Инро барои чопгарӣ ба компютер пайваст шуда бо паралел истофода баред, " "сериягӣ ё USB порт.

" #: management/kmwbackend.cpp:122 msgid "&SMB shared printer (Windows)" msgstr "&Чопгари SMB (Windows)" #: management/kmwbackend.cpp:123 msgid "" "" "

Shared Windows printer

" "

Use this for a printer installed on a Windows server and shared on the " "network using the SMB protocol (samba).

" msgstr "" "" "

Чопгари тақсимшудаи Панҷара

" "

Инро барои чопгарри, ки ба сервери Панҷара танзим шудааст ва ба шабака " "тақсим шудааст бо истифодабарии протоколи (самба) SMB истифода бурда " "мешавад.

" #: management/kmwbackend.cpp:130 msgid "&Remote LPD queue" msgstr "&Навбати ҳузфшудаи LPD" #: management/kmwbackend.cpp:131 msgid "" "" "

Print queue on a remote LPD server

" "

Use this for a print queue existing on a remote machine running a LPD print " "server.

" msgstr "" "" "

Чоп кардан дар вақти сервери дурии LPD

" "

Инро барои чоп кардан дар вақти дурии кор кардани мошинаи сервери чопкунии " "LPD.

" #: management/kmwbackend.cpp:137 msgid "Ne&twork printer (TCP)" msgstr "Чоп&гари шабақа (TCP)" #: management/kmwbackend.cpp:138 msgid "" "" "

Network TCP printer

" "

Use this for a network-enabled printer using TCP (usually on port 9100) as " "communication protocol. Most network printers can use this mode.

" msgstr "" "" "

Шабакаи чопгари TCP

" "

Инро барои тавоно кардани шабакаи чопгар бо истифодабарии TCP(баъзевақт дар " "порт 9100) мисли протоколи коммуникатсия. Қариб ҳамаи шабакаҳои чопгарҳо ин " "тазро истифода мебаранд.

" #: management/kmwfile.cpp:35 msgid "File Selection" msgstr "Интихоби Файл" #: management/kmwfile.cpp:41 msgid "" "

The printing will be redirected to a file. Enter here the path of the file " "you want to use for redirection. Use an absolute path or the browse button for " "graphical selection.

" msgstr "" "

Чоп ба сӯи файл пешравӣ хоҳад шуд. Роҳе ба файл нишон диҳед, ки дар он шумо " "мехоҳед хулосаро равона кунед. Роҳи пурраро ворид кунед ё кнопкаи \"Обзор\"-ро " "барои роҳи масъала, интихоб кунед.

" #: management/kmwfile.cpp:44 msgid "Print to file:" msgstr "Чоп намудан ба файл:" #: management/kmconfiggeneral.cpp:137 management/kmwfile.cpp:60 msgid "Empty file name." msgstr "Номи файл ишора нашудааст." #: management/kmwfile.cpp:66 msgid "Directory does not exist." msgstr "Каталог вуҷуд надорад!" #: management/kmdriverdbwidget.cpp:51 msgid "&PostScript printer" msgstr "&Чопгари PostScript" #: management/kmdriverdbwidget.cpp:52 msgid "&Raw printer (no driver needed)" msgstr "&Чопгари нокоркард (Драйвере лозим нест)." #: management/kmdriverdbwidget.cpp:55 msgid "&Other..." msgstr "&Ғайра..." #: management/kmdriverdbwidget.cpp:56 msgid "&Manufacturer:" msgstr "&Истеҳсолоти:" #: management/kmdriverdbwidget.cpp:57 msgid "Mo&del:" msgstr "&Шакл:" #: management/kmdriverdbwidget.cpp:157 management/kmdriverdbwidget.cpp:166 msgid "Loading..." msgstr "Пурборкунӣ..." #: management/kmdriverdbwidget.cpp:217 msgid "Unable to find the PostScript driver." msgstr "Драйвери PostScript ёфт нашуд." #: management/kmdriverdbwidget.cpp:230 msgid "Select Driver" msgstr "Интихоби Драйвер" #: management/kmdriverdbwidget.cpp:247 management/kmdriverdbwidget.cpp:249 msgid "" msgstr "<Номуайян>" #: management/kmdriverdbwidget.cpp:252 msgid "Database" msgstr "Базаҳои додашуда" #: management/kmdriverdbwidget.cpp:259 msgid "Wrong driver format." msgstr "Андозаи драйвер нодуруст аст." #: management/kmdriverdbwidget.cpp:268 msgid "Other" msgstr "Ғайра" #: management/networkscanner.cpp:104 management/networkscanner.cpp:184 msgid "Sc&an" msgstr "Мушо&ҳида" #: management/networkscanner.cpp:111 msgid "Network scan:" msgstr "Ҷустуҷӯ дар шабақа:" #: management/networkscanner.cpp:112 management/networkscanner.cpp:299 #: management/networkscanner.cpp:310 #, c-format msgid "Subnet: %1" msgstr "Шабақаи иловагӣ: %1" #: management/networkscanner.cpp:161 msgid "" "You are about to scan a subnet (%1.*) that does not correspond to the current " "subnet of this computer (%2.*). Do you want to scan the specified subnet " "anyway?" msgstr "" "Шумо ба таркибкушоии зершабақаи (%1.*) мебошед, ки ин ба зершабақаикомпютери " "(%2.*) мутобиқат намекунад. Шумо ҳақиқатан мехоҳед, ки зершабақаи нишондодро " "таркибкушоӣ кунед?" #: management/networkscanner.cpp:164 msgid "&Scan" msgstr "&Мушоҳида" #: management/kmwsocketutil.cpp:52 management/networkscanner.cpp:338 msgid "&Subnetwork:" msgstr "&Зершабақа:" #: management/kmwsocketutil.cpp:54 management/networkscanner.cpp:340 msgid "&Timeout (ms):" msgstr "&Итмоми вақт (мс):" #: management/kmwsocketutil.cpp:92 management/networkscanner.cpp:378 msgid "Scan Configuration" msgstr "Танзими мушоҳидот" #: management/kmwsocketutil.cpp:104 management/kmwsocketutil.cpp:110 #: management/networkscanner.cpp:390 management/networkscanner.cpp:396 msgid "Wrong subnetwork specification." msgstr "Рӯи зершабақаро нодуруст ишора кардаед." #: management/kmwsocketutil.cpp:118 management/networkscanner.cpp:404 msgid "Wrong timeout specification." msgstr "Муайянкунандаи итмоми вақт нодуруст аст." #: management/kmwsocketutil.cpp:121 management/networkscanner.cpp:407 msgid "Wrong port specification." msgstr "Портро нодуруст ишора кардаед." #: management/kxmlcommandselector.cpp:54 msgid "New command" msgstr "Иловаи фармонот" #: management/kxmlcommandselector.cpp:55 msgid "Edit command" msgstr "Таҳрири фармонот" #: management/kxmlcommandselector.cpp:72 msgid "&Browse..." msgstr "&Тафсирот..." #: management/kxmlcommandselector.cpp:73 msgid "Use co&mmand:" msgstr "Фармонотро &истифода кунед:" #: management/kxmlcommandselector.cpp:174 msgid "Command Name" msgstr "Номи фармонот" #: management/kxmlcommandselector.cpp:174 msgid "Enter an identification name for the new command:" msgstr "Номи муайяне барои фармоноти нав, ворид кунед:" #: management/kxmlcommandselector.cpp:183 msgid "" "A command named %1 already exists. Do you want to continue and edit the " "existing one?" msgstr "" "Фармоноти %1 аллакай мавҷуд аст. Шумо мехоҳед давом диҳед ва мавҷуд бударо " "тағйир диҳед?" #: management/kxmlcommandselector.cpp:220 msgid "Internal error. The XML driver for the command %1 could not be found." msgstr "Хатои дохилӣ. Драйвери XML барои фармони %1 ёфт нашуд." #: management/kxmlcommandselector.cpp:238 msgid "output" msgstr "хурӯҷ" #: management/kxmlcommandselector.cpp:242 msgid "undefined" msgstr "номуайян" #: management/kxmlcommandselector.cpp:247 msgid "not allowed" msgstr "иҷозате нест" #: management/kxmlcommandselector.cpp:253 msgid "(Unavailable: requirements not satisfied)" msgstr "(Имконнопазирӣ: талабот ба сифат ҷавобгӯй нест)" #: management/kmconfigpreview.cpp:35 msgid "Preview" msgstr "Пешнамоиш" #: management/kmconfigpreview.cpp:36 msgid "Preview Settings" msgstr "Параметрҳои пешнамоиш" #: management/kmconfigpreview.cpp:39 msgid "Preview Program" msgstr "Барномаи Пешнамоиш" #: management/kmconfigpreview.cpp:41 msgid "&Use external preview program" msgstr "&Бо истифода аз тасовироти барномаи берунӣ" #: management/kmconfigpreview.cpp:44 msgid "" "You can use an external preview program (PS viewer) instead of the TDE built-in " "preview system. Note that if the TDE default PS viewer (KGhostView) cannot be " "found, TDE tries automatically to find another external PostScript viewer" msgstr "" "Шумо метавонед барномаи тасовироти берунии PostScript-ро ба ҷои тасовироти " "системаи сохташудаи TDE, истифода кунед. Аниқ кардан лозим аст, ки агар TDE " "барномаи тасовироти PS-и пешфарзи (KGhostView) бошад, ин ҳолат барномаи " "тасовироти берунии дигари PostScript, худкорона ба ҷустуҷӯи онхоҳад шуд." #: management/kmwclass.cpp:37 msgid "Class Composition" msgstr "Сохти синф" #: management/kmwclass.cpp:52 msgid "Available printers:" msgstr "Чопгарҳои дастрас:" #: management/kmwclass.cpp:53 msgid "Class printers:" msgstr "Синфҳои чопгар:" #: management/kmwclass.cpp:79 msgid "You must select at least one printer." msgstr "Шумо бояд ягон чопгареро ишора намоед!" #: management/kmpropmembers.cpp:39 management/kmwend.cpp:59 msgid "Members" msgstr "Узвҳо" #: management/kmpropmembers.cpp:40 msgid "Class Members" msgstr "Синфи узвҳо" #: management/kaddprinterwizard.cpp:10 msgid "Configure TDE Print" msgstr "Танзими чопгари TDE" #: management/kaddprinterwizard.cpp:11 msgid "Configure print server" msgstr "Танзими чопгари сервер" #: management/kaddprinterwizard.cpp:18 msgid "Start the add printer wizard" msgstr "Оғоз намудани устоди танзимоти чопгар" #: management/kmpropwidget.cpp:50 msgid "" "Unable to change printer properties. Error received from manager:" "

%1

" msgstr "" "Қодир ба тағйир додани хусусияти чопгар нестам.Аз мудир хатогӣ қабул карда " "шуд:" "

%1

" #: management/kmdbcreator.cpp:92 msgid "" "No executable defined for the creation of the driver database. This operation " "is not implemented." msgstr "" "Барнома барои сохтани додашудаҳои драйвер, муайян нашудааст. Ин амалиёт " "муваққатӣ нашудааст." #: management/kmdbcreator.cpp:95 msgid "" "The executable %1 could not be found in your PATH. Check that this program " "exists and is accessible in your PATH variable." msgstr "" "Барномаи иҷрошавандаи %1 дар роҳчаи шумо ёфт нашуд. Мутмаъин бошед, ки барнома " "вуҷуд мебошад ва роҳе ба он дар тағйирёбандаи PATHнишон додааст." #: management/kmdbcreator.cpp:99 msgid "" "Unable to start the creation of the driver database. The execution of %1 " "failed." msgstr "" "Наметавонам сохтани базаҳои додашудаи драйверҳоро сар диҳам. Хатои иҷрошавии " "%1." #: management/kmdbcreator.cpp:113 msgid "Please wait while TDE rebuilds a driver database." msgstr "" "Интизор шавед, ҳоло TDE базаҳои додашудаи драйверҳоро бозсозӣ карда истодааст." #: management/kmdbcreator.cpp:114 msgid "Driver Database" msgstr "Манбаъҳои маълумоти драйвер" #: management/kmdbcreator.cpp:171 msgid "" "Error while creating driver database: abnormal child-process termination." msgstr "" "Хатогӣ мавриди сабт кардани базаи додашудаҳои чопгар: итмоми номуқаррарӣ ҳолати " "амали фаръӣ!" #: management/kmwname.cpp:34 msgid "General Information" msgstr "Ахбороти умумӣ" #: management/kmwname.cpp:37 msgid "" "

Enter the information concerning your printer or class. Name " "is mandatory, Location and Description " "are not (they may even not be used on some systems).

" msgstr "" "

Ахбороте дар бораи чопгари худ ёки синф ворид кунед. Заминаи Ном " "ҳатмист барои пур кардан, Ҷойгиршавӣ ваТасовирот " "- ғайр (ва дар якхел системаҳо истифода намешаванд).

" #: management/kmwname.cpp:39 msgid "Name:" msgstr "Ном:" #: management/kmwname.cpp:48 msgid "You must supply at least a name." msgstr "Шумо бояд ягон номе ворид кунед." #: management/kmwname.cpp:56 msgid "" "It is usually not a good idea to include spaces in printer name: it may prevent " "your printer from working correctly. The wizard can strip all spaces from the " "string you entered, resulting in %1; what do you want to do?" msgstr "" "Ин маслиҳати хуб нест, ки фосиларо дар номи чопгар истифода кунед, чунки ин " "кори чопгарро паст мекунад. Устод метавонад ҳамаи фосилаҳороаз сатрҳои ворид " "кардаи шуморо нест кунад, натиҷаи он дар %1 мешавад. Шумо чӣ мехоҳед кард?" #: management/kmwname.cpp:62 msgid "Strip" msgstr "Буриш" #: management/kmwdriver.cpp:80 management/kmwend.cpp:106 #: management/kmwname.cpp:83 msgid "Raw printer" msgstr "Чопгари сабтнашуда" #: management/kmwpassword.cpp:37 msgid "User Identification" msgstr "Идентификатсияи истифодакунанда" #: management/kmwpassword.cpp:43 msgid "" "

This backend may require a login/password to work properly. Select the type " "of access to use and fill in the login and password entries if needed.

" msgstr "" "

Дар ин тартиботи оиди кор, ном ва гузарвожаро нишон додан лозим аст. " "Заминаҳои лозимиро пур кунед ёки Вурудоти анонимӣ" "-ро барои иҷозат додани ҳуқуқи анонимӣ, фаъол созед.

" #: management/kmwpassword.cpp:49 msgid "&Login:" msgstr "&Ном:" #: management/kmwpassword.cpp:53 msgid "&Anonymous (no login/password)" msgstr "&Аноним (номе/гузарвожае нест)" #: management/kmwpassword.cpp:54 msgid "&Guest account (login=\"guest\")" msgstr "&Ҳуқуқи анонимӣ (login=\"guest\")" #: management/kmwpassword.cpp:55 msgid "Nor&mal account" msgstr "Рақа&ми муқаррар" #: management/kmwpassword.cpp:88 msgid "Select one option" msgstr "Ягон интихоботгоҳеро интихоб кунед!" #: management/kmwpassword.cpp:90 msgid "User name is empty." msgstr "Номи истифодакунандаро ишора кардагӣ нест!" #: management/kmwdriverselect.cpp:37 msgid "Driver Selection" msgstr "Интихоби драйвер" #: management/kmwdriverselect.cpp:43 msgid "" "

Several drivers have been detected for this model. Select the driver you " "want to use. You will have the opportunity to test it as well as to change it " "if necessary.

" msgstr "" "

Барои ин услуб якчанд драйвер ёфт шуд. Драйвере интихоб кунед, ки шумо " "мехоҳед истифода кунед. Онро тафтиш хоҳед кард ва дар мавриди лозимӣ тағйир " "хоҳед кард.

" #: management/kmwdriverselect.cpp:46 msgid "Driver Information" msgstr "Ахборот дар бораи драйвер" #: management/kmwdriverselect.cpp:62 msgid "You must select a driver." msgstr "Шумо бояд драйвере интихоб кунед." #: management/kmwdriverselect.cpp:82 msgid " [recommended]" msgstr " [тавсия карда мешавад]" #: management/kmwdriverselect.cpp:113 msgid "No information about the selected driver." msgstr "Ахборот дар бораи драйвери интихобшуда мавҷуд намебошад." #: management/kmpropbackend.cpp:34 msgid "Printer type:" msgstr "Намуди чопгар:" #: management/kmpropbackend.cpp:48 msgid "Interface" msgstr "Интерфейс" #: management/kmpropbackend.cpp:49 msgid "Interface Settings" msgstr "Параметрҳои интерфейс" #: management/kmpropbackend.cpp:62 msgid "IPP Printer" msgstr "Чопгари IPP" #: management/kmpropbackend.cpp:63 msgid "Local USB Printer" msgstr "Чопгари USB-и локалӣ" #: management/kmpropbackend.cpp:64 msgid "Local Parallel Printer" msgstr "Чопгари параллелии локалӣ" #: management/kmpropbackend.cpp:65 msgid "Local Serial Printer" msgstr "Чопгари қабили локалӣ" #: management/kmpropbackend.cpp:66 msgid "Network Printer (socket)" msgstr "Чопгари шабақа (socket)" #: management/kmpropbackend.cpp:67 msgid "SMB printers (Windows)" msgstr "Чопгарҳои Windows" #: lpd/kmlpduimanager.cpp:45 management/kmpropbackend.cpp:68 #: rlpr/kmwrlpr.cpp:116 msgid "Remote LPD queue" msgstr "Навбати шабақавии LPD " #: management/kmpropbackend.cpp:69 msgid "File printer" msgstr "Ба файл чоп намудан" #: management/kmpropbackend.cpp:70 msgid "Serial Fax/Modem printer" msgstr "Чопгар - равиши факс/модем" #: management/kmpropbackend.cpp:71 msgid "" "_: Unknown Protocol\n" "Unknown" msgstr "Протоколи номуайян" #: management/kmconfigdialog.cpp:38 msgid "TDE Print Configuration" msgstr "Танзими чопи TDE" #: management/kmpropdriver.cpp:36 msgid "Manufacturer:" msgstr "Истеҳсолоти:" #: management/kmpropdriver.cpp:37 msgid "Printer model:" msgstr "Шакли чопгар:" #: management/kmpropdriver.cpp:38 msgid "Driver info:" msgstr "Ахборот дар бораи драйвер:" #: lpd/lpdtools.cpp:239 management/kmpropdriver.cpp:53 #: management/kmwend.cpp:104 msgid "Driver" msgstr "Драйвер" #: management/kmwsocket.cpp:38 msgid "Network Printer Information" msgstr "Ахборот дар бораи чопгари шабақа" #: management/kmwsocket.cpp:48 msgid "&Printer address:" msgstr "&Адреси чопгар:" #: management/kmwsocket.cpp:49 msgid "P&ort:" msgstr "По&рт:" #: management/kmwsocket.cpp:99 msgid "You must enter a printer address." msgstr "Шумо бояд адреси чопгарро гузоред!" #: management/kmwsocket.cpp:110 msgid "Wrong port number." msgstr "Рақами порт нодуруст аст!" #: management/kmwizard.cpp:64 management/kmwizard.cpp:209 msgid "&Next >" msgstr "&Баъдӣ >" #: management/kmwizard.cpp:66 msgid "< &Back" msgstr "< &Қаблӣ" #: management/kmwizard.cpp:131 management/kmwizard.cpp:166 #: management/kmwizard.cpp:191 msgid "Add Printer Wizard" msgstr "Устоди танзимоти чопгар" #: management/kmwizard.cpp:166 msgid "Modify Printer" msgstr "Тағйири чопгар" #: management/kmwizard.cpp:191 msgid "Unable to find the requested page." msgstr "Қобили ёфтани саҳифаи нишондод нестам." #: management/kmwizard.cpp:207 management/kmwizard.cpp:234 msgid "&Finish" msgstr "&Тайёр" #: management/kmwinfopage.cpp:32 msgid "Introduction" msgstr "Пешниҳод" #: management/kmwinfopage.cpp:37 #, fuzzy msgid "" "

Welcome,

" "
" "

This wizard will help to install a new printer on your computer. It will " "guide you through the various steps of the process of installing and " "configuring a printer for your printing system. At each step, you can always go " "back using the Back button.

" "
" "

We hope you enjoy this tool!

" "
" msgstr "" "

Хуш омадед!

" "
" "

Устод ба танзими чопгари нави шумо ёрӣ хоҳад дод. Он шуморо ба тамоми " "марҳалаи сабт ва танзимоти чопгар барои системаи чопии шумо мегузаронад. Дар " "ягон замони хостаатон метавонед бо пахши кнопкаи Ақиб " "аз нав баргардед.

" "
" "

Умед дорем, ки ин утилит ба шумо хеле писанд омад.

" "

Тайёр кардагони системаи чопи TDE.

" #: management/kmconfigjobs.cpp:33 management/kmpages.cpp:59 msgid "Jobs" msgstr "Масъала" #: management/kmconfigjobs.cpp:37 msgid "Jobs Shown" msgstr "Масъалаҳои тасовиршаванда" #: management/kmconfigjobs.cpp:42 msgid "Maximum number of jobs shown:" msgstr "Миқдори зиёди масъалаҳои тасвиршаванда:" #: management/kxmlcommanddlg.cpp:108 msgid "Integer" msgstr "Integer" #: management/kxmlcommanddlg.cpp:109 msgid "Float" msgstr "Float" #: management/kxmlcommanddlg.cpp:110 msgid "List" msgstr "List" #: management/kmspecialprinterdlg.cpp:57 management/kxmlcommanddlg.cpp:115 #: management/kxmlcommanddlg.cpp:866 msgid "&Description:" msgstr "&Тасвирот:" #: management/kmspecialprinterdlg.cpp:83 management/kxmlcommanddlg.cpp:116 msgid "&Format:" msgstr "&Андоза:" #: management/kxmlcommanddlg.cpp:118 msgid "Default &value:" msgstr "Аҳамияти &пешфарз:" #: management/kxmlcommanddlg.cpp:119 msgid "Co&mmand:" msgstr "&Фармон:" #: management/kxmlcommanddlg.cpp:126 msgid "&Persistent option" msgstr "&Параметри доимӣ" #: management/kxmlcommanddlg.cpp:128 msgid "Va&lues" msgstr "А&ҳамиятҳо" #: management/kxmlcommanddlg.cpp:136 msgid "Minimum v&alue:" msgstr "Аҳамияти &минималӣ:" #: management/kxmlcommanddlg.cpp:137 msgid "Ma&ximum value:" msgstr "Аҳамияти &максималӣ:" #: management/kmwend.cpp:53 management/kmwend.cpp:112 #: management/kxmlcommanddlg.cpp:142 management/kxmlcommanddlg.cpp:545 msgid "Description" msgstr "Тасвирот" #: management/kxmlcommanddlg.cpp:150 msgid "Add value" msgstr "Иловаи аҳамият" #: management/kxmlcommanddlg.cpp:151 msgid "Delete value" msgstr "Нобуд кардани аҳамият" #: management/kxmlcommanddlg.cpp:153 msgid "Apply changes" msgstr "Кабул кардани танзимот" #: management/kxmlcommanddlg.cpp:154 msgid "Add group" msgstr "Иловаи гурӯҳ" #: management/kxmlcommanddlg.cpp:155 msgid "Add option" msgstr "Иловаи интихоб" #: management/kxmlcommanddlg.cpp:156 msgid "Delete item" msgstr "Нобуд кардани ҷузъиёт" #: management/kxmlcommanddlg.cpp:157 tdefilelist.cpp:135 msgid "Move up" msgstr "Ба боло ҷойгир кардан" #: management/kxmlcommanddlg.cpp:158 tdefilelist.cpp:142 msgid "Move down" msgstr "Ба поён ҷойгир кардан" #: management/kxmlcommanddlg.cpp:162 msgid "&Input From" msgstr "&Дохил кардан аз" #: management/kxmlcommanddlg.cpp:163 msgid "O&utput To" msgstr "&Хориҷ намудан ба" #: management/kxmlcommanddlg.cpp:164 management/kxmlcommanddlg.cpp:166 msgid "File:" msgstr "Файл:" #: management/kxmlcommanddlg.cpp:165 management/kxmlcommanddlg.cpp:167 msgid "Pipe:" msgstr "Роҳ:" #: management/kxmlcommanddlg.cpp:285 msgid "" "An identification string. Use only alphanumeric characters except spaces. The " "string __root__ is reserved for internal use." msgstr "" "Шиносоии банд. Фақат аломатҳои матнӣ бағайр аз фосилаҳо, истифода баред. Банди " "__реша__ барои истифодабарии дохилӣ захира шудааст." #: management/kxmlcommanddlg.cpp:289 msgid "" "A description string. This string is shown in the interface, and should be " "explicit enough about the role of the corresponding option." msgstr "" "Шарҳи банд. Ин банд дар сарлавҳа нишон дода мешавад ва бояд дар бораи роли " "иртиботи параметр кифоя дақиқ бошад." #: management/kxmlcommanddlg.cpp:293 msgid "" "The type of the option. This determines how the option is presented graphically " "to the user." msgstr "" "Намуди параметр. Ин чи хел параметр ба истифодабаранда графикӣ нишон медиҳад, " "мушаххас мекунад." #: management/kxmlcommanddlg.cpp:297 #, fuzzy msgid "" "The format of the option. This determines how the option is formatted for " "inclusion in the global command line. The tag %value " "can be used to represent the user selection. This tag will be replaced at " "run-time by a string representation of the option value." msgstr "" "Формати параметр. Ин мушаххас мекунад, ки чи хел параметр барои шомил дар " "фармони линияи глобалӣ формат дода шудааст. Барчаспи %арзиш" ",ки барои нишон додани ба интихоби истифодабаранда, истифода бурда мешавад. Ин " "барчасп дар замони иҷро аз тарафи банди намоишгарони арзиши параметр,барқарор " "карда мешавад." #: management/kxmlcommanddlg.cpp:303 msgid "" "The default value of the option. For non persistent options, nothing is added " "to the command line if the option has that default value. If this value does " "not correspond to the actual default value of the underlying utility, make the " "option persistent to avoid unwanted effects." msgstr "" "Пешфарзи арзиши параметр. Барои параметри суботнокпазир, ҳеч чиз ба линияи " "фармон дохил карда мешавад агар параметр арзиши пешфарз дорад. Агар ин арзиш ба " "арзиши пешфарзи воқеъии ахбороти умумӣ иртибот накунад, параметри " "суботнокпазиро аз натиҷаҳои бефорам ҷудо кунед." #: management/kxmlcommanddlg.cpp:309 msgid "" "Make the option persistent. A persistent option is always written to the " "command line, whatever its value. This is useful when the chosen default value " "does not match with the actual default value of the underlying utility." msgstr "" "Параметрро суботкорӣ кунед. Параметри суботкорӣ фақат дар хати фармон навишта " "мешавад, арзишаш чӣ қадар бошад. Ин хуб аст, агар пешфази арзиши интихобшудаи " "нобаён бо арзиши воқеъшудаи нобаён мутобиқат карда намешаванд." #: management/kxmlcommanddlg.cpp:313 #, c-format msgid "" "The full command line to execute the associated underlying utility. This " "command line is based on a mechanism of tags that are replaced at run-time. The " "supported tags are:" "
    " "
  • %filterargs: command options
    • " "
  • %filterinput: input specification
    • " "
  • %filteroutput: output specification
    • " "
  • %psu: the page size in upper case
    • " "
  • %psl: the page size in lower case
" msgstr "" "Фармони линияи пурра барои иҷро кардани ахбороти асосии пайвастшуда. Ин линияи " "фармон дар асоси механизми тегҳо,ки дар динамикӣ ҷойгир аст. Тегҳои " "дастёркунанда: " "
    " "
  • %filterargs: command options
    • " "
  • %filterinput: input specification
    • " "
  • %filteroutput: output specification
    • " "
  • %psu: the page size in upper case
    • " "
  • %psl: the page size in lower case
" #: management/kxmlcommanddlg.cpp:323 #, c-format msgid "" "Input specification when the underlying utility reads input data from a file. " "Use the tag %in to represent the input filename." msgstr "" "Даромади маҳсулоти вақте,ки ахбороти асосӣ рӯзи даровардаро аз файл мехонад. " "Теги %in барои нишон додани номи файли даромад, истифода баред." #: management/kxmlcommanddlg.cpp:327 #, c-format msgid "" "Output specification when the underlying utility writes output data to a file. " "Use the tag %out to represent the output filename." msgstr "" "Баромади маҳсулот вақте, ки ахбороти асосӣ рӯзи баромадро ба файл менависад. " "Теги %out барои нишон додани номи файли баромад, истифода баред." #: management/kxmlcommanddlg.cpp:331 msgid "" "Input specification when the underlying utility reads input data from its " "standard input." msgstr "" "Даромади маҳсулоти вақте,ки ахбороти асосӣ рӯзи даровардаро аз стандарти " "даромад мехонад." #: management/kxmlcommanddlg.cpp:335 msgid "" "Output specification when the underlying utility writes output data to its " "standard output." msgstr "" "Баромади маҳсулот вақте, ки ахбороти асосӣ номгӯйи рӯзро ба стандарти баромад " "менависад." #: management/kxmlcommanddlg.cpp:339 msgid "" "A comment about the underlying utility, which can be viewed by the user from " "the interface. This comment string supports basic HTML tags like <a>, " "<b> or <i>." msgstr "" "Баромад дар бораи ахбороти асосӣ, ки аз тарафи истифодабаранда аз сарлавҳа " "нишон дода мешавад. Ин хабари хат асоси HTML тегҳои мисли<a>, <b> " "or <i> дастёрӣ мекунад." #: management/kxmlcommanddlg.cpp:568 msgid "" "Invalid identification name. Empty strings and \"__root__\" are not allowed." msgstr "" "Номи идентификатсионии нодуруст. Сатрҳои холӣ ва \"__root__\" қобили ҷоизӣ " "намебошад." #: management/kxmlcommanddlg.cpp:649 management/kxmlcommanddlg.cpp:652 msgid "New Group" msgstr "Гурӯҳи нав" #: management/kxmlcommanddlg.cpp:668 management/kxmlcommanddlg.cpp:671 msgid "New Option" msgstr "Интихоботгоҳи нав" #: management/kxmlcommanddlg.cpp:795 management/kxmlcommanddlg.cpp:939 #, c-format msgid "Command Edit for %1" msgstr "Таҳриргари фармонот барои %1" #: management/kxmlcommanddlg.cpp:833 msgid "&Mime Type Settings" msgstr "&Танзимоти Намуди Mime" #: management/kxmlcommanddlg.cpp:839 msgid "Supported &Input Formats" msgstr "Шаклҳои &дастрасии вурудот" #: kpfilterpage.cpp:407 management/kxmlcommanddlg.cpp:840 msgid "Requirements" msgstr "Талабот" #: management/kxmlcommanddlg.cpp:851 msgid "&Edit Command..." msgstr "&Таҳрири фармонот..." #: management/kxmlcommanddlg.cpp:868 msgid "Output &format:" msgstr "Андозаи &хуруҷот:" #: management/kxmlcommanddlg.cpp:870 msgid "ID name:" msgstr "Номи ID:" #: management/kxmlcommanddlg.cpp:1033 msgid "exec:/" msgstr "exec:/" #: driver.cpp:377 kpgeneralpage.cpp:261 lpd/lpdtools.cpp:307 #: management/kmconfiggeneral.cpp:44 management/kmpropgeneral.cpp:54 #: management/kmwend.cpp:49 msgid "General" msgstr "Умумӣ" #: management/kmconfiggeneral.cpp:45 management/kmpropgeneral.cpp:55 msgid "General Settings" msgstr "Параметрҳои умумӣ" #: management/kmconfiggeneral.cpp:48 msgid "Refresh Interval" msgstr "Фосилаи бозсозӣ" #: management/kmconfiggeneral.cpp:51 msgid " sec" msgstr " сон" #: kpgeneralpage.cpp:416 lpd/lpdtools.cpp:40 management/kmconfiggeneral.cpp:52 msgid "Disabled" msgstr "Ғайри фаъол аст" #: management/kmconfiggeneral.cpp:53 msgid "" "This time setting controls the refresh rate of various TDE Print " "components like the print manager and the job viewer." msgstr "" "Ин танзимотгоҳи вақт бо дақиқияти бозсозии компонентҳои гуногуни" "Системаи чопгоҳи TDE, монанди мудири чопгар ва намоишгари масъала, идора " "хоҳад кард." #: management/kmconfiggeneral.cpp:57 msgid "Test Page" msgstr "Санҷишоти саҳифа" #: management/kmconfiggeneral.cpp:58 msgid "&Specify personal test page" msgstr "Бо &истифода аз саҳифаи санҷишии ғайристандартӣ" #: management/kmconfiggeneral.cpp:60 msgid "Preview..." msgstr "Пешнамоишот..." #: management/kmconfiggeneral.cpp:70 msgid "Sho&w printing status message box" msgstr "Намои&ши тирезаи ҳолати чоп" #: management/kmconfiggeneral.cpp:71 msgid "De&faults to the last printer used in the application" msgstr "&Пешфарзот барои чопгари охирине, ки дар барнома истифода шудааст" #: management/kmconfiggeneral.cpp:127 msgid "" "The selected test page is not a PostScript file. You may not be able to test " "your printer anymore." msgstr "" "Саҳифаи озмоишоти интихобшуда, файли PostScript намебошад. Шумо дигар чопгари " "худро озмоида наметавонед." #: management/kminstancepage.cpp:61 msgid "" "Define/Edit here instances for the current selected printer. An instance is a " "combination of a real (physical) printer and a set of predefined options. For a " "single InkJet printer, you could define different print formats like " "DraftQuality, PhotoQuality or TwoSided" ". Those instances appear as normal printers in the print dialog and allow you " "to quickly select the print format you want." msgstr "" "Дар инҷо нусхаи раванди чопгарро муайян/таҳрир кардан мумкин аст. Нусха - ин " "комбинатсияи ҳақиқии (физикии) чопгар ва набори пешмуайяншудаи параметр " "мебошанд. Мисол, барои як чопгари физикии InkJet мумкин аст якчанд шаклҳои, " "монанди Сиёҳнавис, Фото ёки Дутарафӣ" "-ро муайян карда мешавад. Ин нусхаҳо монанди чопгарҳои ҷудо дар диалоги чоп " "намоён мешаванд, ки что позволит быстро выбрать необходимый формат." #: management/kminstancepage.cpp:87 msgid "New..." msgstr "Нав..." #: management/kminstancepage.cpp:88 msgid "Copy..." msgstr "Нусха..." #: kmvirtualmanager.cpp:166 management/kminstancepage.cpp:91 msgid "Set as Default" msgstr "Асосӣ кардан" #: management/kminstancepage.cpp:92 #, fuzzy msgid "Settings" msgstr "Танзимотҳо..." #: management/kminstancepage.cpp:94 msgid "Test..." msgstr "Санҷиш..." #: management/kminstancepage.cpp:113 management/kminstancepage.cpp:126 #: management/kminstancepage.cpp:138 management/kminstancepage.cpp:145 #: management/kminstancepage.cpp:161 management/kminstancepage.cpp:164 #: management/kminstancepage.cpp:183 management/kminstancepage.cpp:190 #: management/kminstancepage.cpp:192 management/kminstancepage.cpp:210 #: management/kminstancepage.cpp:244 management/kminstancepage.cpp:260 msgid "(Default)" msgstr "(Пешфарз)" #: management/kminstancepage.cpp:137 management/kminstancepage.cpp:182 msgid "Instance Name" msgstr "Номи нусха" #: management/kminstancepage.cpp:137 management/kminstancepage.cpp:182 msgid "Enter name for new instance (leave untouched for default):" msgstr "Номи нусхоти навро ворид кунед (ёки онро ҳамчун пешфарз бимонед):" #: management/kminstancepage.cpp:142 management/kminstancepage.cpp:187 msgid "Instance name must not contain any spaces or slashes." msgstr "Дар номи нусхот ягон фосилае набояд бошад." #: management/kminstancepage.cpp:161 msgid "Do you really want to remove instance %1?" msgstr "Шумо ҳақиқатан мехоҳед нусхаи %1-ро нобуд созед?" #: management/kminstancepage.cpp:161 msgid "" "You can't remove the default instance. However all settings of %1 will be " "discarded. Continue?" msgstr "" "Қодири нест кардани нухаи асосӣ намебошам. Лекин тамоми танзимотҳои %1 ҳузф " "хоҳанд шуд. Давом медиҳед?" #: management/kminstancepage.cpp:213 #, c-format msgid "Unable to find instance %1." msgstr "Қодир ба ҷустуҷӯи нусхаи %1 нестам." #: management/kminstancepage.cpp:215 #, c-format msgid "" "Unable to retrieve printer information. Message from printing system: %1." msgstr "" "Хатогӣ мавриди қабули ахборот дар бораи чопгар. Иттилооти системаи чопгар: %1." #: management/kminstancepage.cpp:232 msgid "The instance name is empty. Please select an instance." msgstr "" "Манбаъи стандартӣ интихоб нашудааст. Манбаъи стандартиро интихоб кунед." #: management/kminstancepage.cpp:264 msgid "Internal error: printer not found." msgstr "Хатои дохилӣ: чопгар ёфт нашуд." #: management/kminstancepage.cpp:268 #, c-format msgid "Unable to send test page to %1." msgstr "Қодир ба фиристодани саҳифаи санҷишии %1 нестам." #: management/kmdriverdialog.cpp:48 msgid "" "Some options are in conflict. You must resolve those conflicts before " "continuing." msgstr "" "Якеи аз интихоботгоҳҳои интихобшуда бо ҳамдигар низоъ мекунанд. Барои давом " "диҳӣ, низоъҳоро ҳузф кардан лозим аст." #: management/kmlistview.cpp:125 msgid "Print System" msgstr "Системаи чопӣ" #: management/kmlistview.cpp:128 msgid "Classes" msgstr "Синфҳо" #: management/kmlistview.cpp:131 msgid "Printers" msgstr "Чопгарҳо" #: management/kmlistview.cpp:134 msgid "Specials" msgstr "Хусусиятҳо" #: management/kmwlocal.cpp:38 msgid "Local Port Selection" msgstr "Интихоби порти локалӣ" #: management/kmwlocal.cpp:50 msgid "Local System" msgstr "Системаи локалӣ" #: management/kmwlocal.cpp:57 msgid "Parallel" msgstr "Параллелӣ" #: management/kmwlocal.cpp:58 msgid "Serial" msgstr "Раванд" #: management/kmwlocal.cpp:59 msgid "USB" msgstr "USB" #: driver.cpp:389 management/kmwlocal.cpp:60 msgid "Others" msgstr "Ғайраҳо" #: management/kmwlocal.cpp:63 msgid "" "

Select a valid detected port, or enter directly the corresponding URI in the " "bottom edit field.

" msgstr "" "

Порти дурусти ёфта шударо интихоб кунед ёки адреси мустақимеро, ки дар " "майдон ҳозир мебошад, интихоб кунед.

" #: management/kmwlocal.cpp:78 msgid "" "_: The URI is empty\n" "Empty URI." msgstr "" #: management/kmwlocal.cpp:83 msgid "The local URI doesn't correspond to a detected port. Continue?" msgstr "Адреси локалӣ ба порти ёфт шуда низ мувофиқ нест. Давом медиҳед?" #: management/kmwlocal.cpp:85 msgid "Select a valid port." msgstr "Порти дурусте интихоб кунед." #: management/kmwlocal.cpp:166 msgid "Unable to detect local ports." msgstr "Қобили ёфтани портҳои локалӣ нестам." #: management/kmwlpd.cpp:41 msgid "LPD Queue Information" msgstr "Ахборот дар бораи LPD навбатӣ" #: management/kmwlpd.cpp:44 msgid "" "

Enter the information concerning the remote LPD queue; this wizard will " "check it before continuing.

" msgstr "" "

Ахбороте дар бораи қатори нобудшудаи LPD-ро ворид кунед. Корбар онро пеш аз " "давом додани кор хоҳад санҷид.

" #: management/kmwlpd.cpp:47 rlpr/kmproprlpr.cpp:35 rlpr/kmwrlpr.cpp:63 msgid "Queue:" msgstr "Навбат:" #: management/kmwlpd.cpp:54 msgid "Some information is missing." msgstr "Нарасоии каме ахборот." #: management/kmwlpd.cpp:61 #, fuzzy msgid "Cannot find queue %1 on server %2; do you want to continue anyway?" msgstr "" "Қобили ҷустуҷӯи қатори %1 дар сервери %2 муяссар намешавад; То ҳол мехоҳед " "давом мехоҳед?" #: management/kmconfigfilter.cpp:40 msgid "Filter" msgstr "Филтер" #: management/kmconfigfilter.cpp:41 msgid "Printer Filtering Settings" msgstr "Танзимотгоҳи филтри чопгар" #: management/kmconfigfilter.cpp:44 msgid "Printer Filter" msgstr "Филтери чопгар" #: management/kmconfigfilter.cpp:56 msgid "" "The printer filtering allows you to view only a specific set of printers " "instead of all of them. This may be useful when there are a lot of printers " "available but you only use a few ones. Select the printers you want to see from " "the list on the left or enter a Location filter (ex: Group_1*). Both are " "cumulative and ignored if empty." msgstr "" "Филтронидани чопгар ба шумо иҷозат медиҳад ба ҷои онки тамоми чопгарҳоро " "бубинед, шумо танҳо набори чопгарҳои нишондодро хоҳед дид. Ин мавриди чопгари " "зиёд танзим кардан, хеле фоиданокмебошад. Ягон чопгари хостаатонро, ки мехоҳед " "бубинед, аз рӯйхати чап интихоб кунед ёки филтери Ҷойгиршавӣ" "-ро ворид кунед(мисоли Group_1*). Филтерҳо якдигарро пур мекунанд ва агар холӣ " "бошанд аҳамият нахоҳад дод." #: management/kmconfigfilter.cpp:62 msgid "Location filter:" msgstr "Ҷойгиршавии филтр:" #: management/kmconfigfonts.cpp:43 msgid "Font Settings" msgstr "Танзими ҳарф" #: management/kmconfigfonts.cpp:46 msgid "Fonts Embedding" msgstr "Сабти ҳуруфҳо" #: management/kmconfigfonts.cpp:47 msgid "Fonts Path" msgstr "Роҳи ҷустуҷӯи ҳарфҳо" #: management/kmconfigfonts.cpp:49 msgid "&Embed fonts in PostScript data when printing" msgstr "&Сабти ҳуруфҳо дар додаҳои PostScript мавриди чоп" #: management/kmconfigfonts.cpp:57 msgid "&Up" msgstr "&Боло" #: management/kmconfigfonts.cpp:58 msgid "&Down" msgstr "&Поён" #: management/kmconfigfonts.cpp:59 msgid "&Add" msgstr "&Илова" #: management/kmconfigfonts.cpp:61 msgid "Additional director&y:" msgstr "Каталоги &иловагӣ" #: management/kmconfigfonts.cpp:85 msgid "" "These options will automatically put fonts in the PostScript file which are not " "present on the printer. Font embedding usually produces better print results " "(closer to what you see on the screen), but larger print data as well." msgstr "" "Ин параметр иҷозати худкорона сабт кардани ба файл ҳуруфҳои PostScript-ро " "медиҳад, ки дар чопгар ҳозир намебошанд. Сабт кардани ҳуруфҳо одатан ба " "натиҷаҳои хуб меорад (бештари онки дар экран дида мешавад), лекин дар ин маврид " "миқдори додашудаҳо вусъат дода мешавад." #: management/kmconfigfonts.cpp:89 msgid "" "When using font embedding you can select additional directories where TDE " "should search for embeddable font files. By default, the X server font path is " "used, so adding those directories is not needed. The default search path should " "be sufficient in most cases." msgstr "" "Барои ҷустуҷӯи сабтоти файлҳои ҳуруф, шумо метавонед каталогҳои иловагиро " "мавриди истифодаи сабти ҳуруфҳо, нишон диҳед.Пешфарзона роҳи ҷустуҷӯи Х-сервер " "истифода шуда истодааст, барои ҳамин иловаи каталогҳое, ки бо Х-сервер истифода " "шуда истодааст, зарурияте надорад. Дар бисёри мавридҳо, истифодаи роҳи ҷустуҷӯи " "пешфарз кофист." #: management/kmspecialprinterdlg.cpp:46 msgid "Add Special Printer" msgstr "Иловаи чопгари махсус" #: management/kmspecialprinterdlg.cpp:58 msgid "&Location:" msgstr "&Ҷойгиршавӣ:" #: management/kmspecialprinterdlg.cpp:66 msgid "Command &Settings" msgstr "Танзими &Фармонот" #: management/kmspecialprinterdlg.cpp:69 msgid "Outp&ut File" msgstr "Файл&и хурӯҷӣ" #: management/kmspecialprinterdlg.cpp:71 msgid "&Enable output file" msgstr "&Хурӯҷоти файлро ғайри фаъол созед" #: management/kmspecialprinterdlg.cpp:88 msgid "Filename e&xtension:" msgstr "&Вусъати файл:" #: management/kmspecialprinterdlg.cpp:105 msgid "" "

The command will use an output file. If checked, make sure the command " "contains an output tag.

" msgstr "" "

Фармонот файли хурӯҷиро истифода хоҳад кард. Агар танзим шуда бошад, " "мутмаъин бошед, ки фармонот дорои tag-и хурӯҷот мебошад.

" #: management/kmspecialprinterdlg.cpp:108 #, c-format msgid "" "

The command to execute when printing on this special printer. Either enter " "the command to execute directly, or associate/create a command object with/for " "this special printer. The command object is the preferred method as it provides " "support for advanced settings like mime type checking, configurable options and " "requirement list (the plain command is only provided for backward " "compatibility). When using a plain command, the following tags are " "recognized:

" "
    " "
  • %in: the input file (required).
    • " "
  • %out: the output file (required if using an output file).
    • " "
  • %psl: the paper size in lower case.
    • " "
  • %psu: the paper size with the first letter in upper case.
" msgstr "" "

Фармонот, мавриди чопкунӣ дар ин чопгари махсус иҷро хоҳад шуд. Ёки " "фармонотро бевосита барои иҷрокунӣ ворид кунед, ёки объекти фармонотро " "бипайвастед/созед бо/барои ин чопгари махсус. Сохтани объекти фармонот тарзи " "хостае мебошад, чанде мавриди ин имкони дастрасии танзимотгоҳҳои иловагӣ " "монанди тафтишоти намуди MIME, параметрҳои танзим мешуда ва рӯйхати дархост низ " "(фармонотҳои оддӣ танҳо барои мувофиқати баргашт дастгирӣ мешаванд) карда " "мешавад. Мавриди истифодаи фармоноти оддӣ, тегҳои дигар низ шинохта мешавад:

" "
    " "
  • %in: файли воридот(лозим аст).
    • " "
  • %out: файли хурӯҷот (дар мавриди истифодаи файли хурӯҷӣ низ лозим " "аст).
    • " "
  • %psl: андозаи қоғаз дар қайдгоҳи поёна мебошад.
    • " "
  • %psu: андозаи қоғаз бо ҳарфи аввал дар қайдгоҳи болоӣ низ ҷойгир " "аст.
" #: management/kmspecialprinterdlg.cpp:118 msgid "" "

The default mimetype for the output file (e.g. application/postscript).

" msgstr "" "

Вусъатоти пешфарз барои файли хурӯҷӣ (мисол: ps, pdf, ps.gz).

" #: management/kmspecialprinterdlg.cpp:121 msgid "

The default extension for the output file (e.g. ps, pdf, ps.gz).

" msgstr "" "

Вусъатоти пешфарз барои файли хурӯҷӣ (мисол: ps, pdf, ps.gz).

" #: management/kmspecialprinterdlg.cpp:170 msgid "You must provide a non-empty name." msgstr "Шумо бояд номи нохолиро пешкаш намоед." #: management/kmspecialprinterdlg.cpp:178 #, c-format msgid "Invalid settings. %1." msgstr "Танзимотҳои нодуруст. %1." #: management/kmspecialprinterdlg.cpp:197 #, c-format msgid "Configuring %1" msgstr "Танзими %1" #: management/smbview.cpp:44 msgid "Comment" msgstr "Шарҳ" #: management/kmwend.cpp:33 msgid "Confirmation" msgstr "Тасдиқот" #: management/kmwend.cpp:50 management/kmwend.cpp:106 #: management/kmwend.cpp:109 tdefilelist.cpp:102 msgid "Type" msgstr "Намуд" #: management/kmwend.cpp:52 msgid "Location" msgstr "Ҷойгиршавӣ" #: management/kmwend.cpp:69 msgid "Backend" msgstr "Протоколи сифати паст" #: management/kmwend.cpp:74 msgid "Device" msgstr "Дастгоҳ" #: management/kmwend.cpp:77 msgid "Printer IP" msgstr "Адреси шабақаи чопгар" #: management/kmwend.cpp:78 management/kmwend.cpp:89 msgid "Port" msgstr "Порт" #: management/kmwend.cpp:81 management/kmwend.cpp:88 msgid "Host" msgstr "Узел" #: management/kmwend.cpp:82 rlpr/kmproprlpr.cpp:48 msgid "Queue" msgstr "Навбатӣ" #: management/kmwend.cpp:91 msgid "Account" msgstr "Шумора" #: management/kmwend.cpp:96 msgid "URI" msgstr "URI" #: management/kmwend.cpp:109 msgid "DB driver" msgstr "Сохтмони DB" #: management/kmwend.cpp:109 msgid "External driver" msgstr "Драйвери берунӣ" #: management/kmwend.cpp:110 msgid "Manufacturer" msgstr "Тавлидкунанда" #: management/kmwend.cpp:111 msgid "Model" msgstr "Шақл" #: management/kmwdriver.cpp:33 msgid "Printer Model Selection" msgstr "Интихоби Шакли Чопгар" #: management/kmwdriver.cpp:113 msgid "Internal error: unable to locate the driver." msgstr "Хатои дохилӣ: драйверро ёфта натавонистам!" #: management/kmpropgeneral.cpp:37 msgid "Printer name:" msgstr "Номи чопгар:" #: management/kmwsmb.cpp:35 msgid "SMB Printer Settings" msgstr "Танзими Чопгари SMB" #: management/kmwsmb.cpp:41 msgid "Scan" msgstr "Мушоҳида" #: management/kmwsmb.cpp:42 msgid "Abort" msgstr "Буриш" #: management/kmwsmb.cpp:44 msgid "Workgroup:" msgstr "Гурӯҳи корӣ:" #: management/kmwsmb.cpp:45 msgid "Server:" msgstr "Сервер:" #: management/kmwsmb.cpp:81 rlpr/kmrlprmanager.cpp:45 msgid "Empty printer name." msgstr "Номи чопгар дода нашудааст." #: management/kmwsmb.cpp:99 #, c-format msgid "Login: %1" msgstr "Номи: %1" #: management/kmwsmb.cpp:99 msgid "" msgstr "<анонимӣ>" #: management/kmpages.cpp:69 msgid "Instances" msgstr "Нусхаҳо" #: kpgeneralpage.cpp:86 msgid "ISO A4" msgstr "ISO A4" #: kpgeneralpage.cpp:87 lpd/lpdtools.cpp:30 msgid "US Letter" msgstr "US Letter" #: kpgeneralpage.cpp:88 lpd/lpdtools.cpp:29 msgid "US Legal" msgstr "US Legal" #: kpgeneralpage.cpp:89 lpd/lpdtools.cpp:28 msgid "Ledger" msgstr "Ledger" #: kpgeneralpage.cpp:90 msgid "Folio" msgstr "Folio" #: kpgeneralpage.cpp:91 msgid "US #10 Envelope" msgstr "Конверт Амрикоии #10 " #: kpgeneralpage.cpp:92 msgid "ISO DL Envelope" msgstr "Конверти ISO DL" #: kpgeneralpage.cpp:93 msgid "Tabloid" msgstr "Tabloid" #: kpgeneralpage.cpp:94 msgid "ISO A3" msgstr "ISO A3" #: kpgeneralpage.cpp:95 msgid "ISO A2" msgstr "ISO A2" #: kpgeneralpage.cpp:96 msgid "ISO A1" msgstr "ISO A1" #: kpgeneralpage.cpp:97 msgid "ISO A0" msgstr "ISO A0" #: kpgeneralpage.cpp:107 msgid "Upper Tray" msgstr "Новаи болоӣ" #: kpgeneralpage.cpp:108 msgid "Lower Tray" msgstr "Новаи поёна" #: kpgeneralpage.cpp:109 msgid "Multi-Purpose Tray" msgstr "Новаи универсалӣ" #: kpgeneralpage.cpp:110 msgid "Large Capacity Tray" msgstr "Новаи дараҷаи баланд" #: kpgeneralpage.cpp:114 msgid "Normal" msgstr "Муқаррарӣ" #: kpgeneralpage.cpp:115 msgid "Transparency" msgstr "Шаффофӣ" #: kpgeneralpage.cpp:124 msgid "" " " "

\"General\"

" "

This dialog page contains general print job settings. General " "settings are applicable to most printers, most jobs and most job file types. " "

To get more specific help, enable the \"WhatsThis\" cursor and click on any " "of the text labels or GUI elements of this dialog. " msgstr "" #: kpgeneralpage.cpp:132 msgid "" " " "

Page size: Select paper size to be printed on from the drop-down " "menu.

" "

The exact list of choices depends on the printer driver (\"PPD\") you have " "installed.

" "
" "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

    -o PageSize=...         # examples: \"A4\" or \"Letter\"

" "" msgstr "" #: kpgeneralpage.cpp:145 msgid "" " " "

Paper type: Select paper type to be printed on from the drop-down " "menu.

" "

The exact list of choices depends on the printer driver (\"PPD\") you have " "installed.

" "
" "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

    -o MediaType=...        # example: \"Transparency\"

" msgstr "" #: kpgeneralpage.cpp:158 msgid "" " " "

Paper source: Select paper source tray for the paper to be printed on " "from the drop-down menu. " "

The exact list of choices depends on the printer driver (\"PPD\") you have " "installed.

" "
" "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

    -o InputSlot=...        # examples: \"Lower\" or \"LargeCapacity\"  "
"

" msgstr "" #: kpgeneralpage.cpp:171 msgid "" " " "

Image Orientation: Orientation of the printed page image on your " "paper is controlled by the radio buttons. By default, the orientation is " "Portrait " "

You can select 4 alternatives: " "

    " "
  • Portrait..Portrait is the default setting.
    • " "
  • Landscape.
    • " "
  • Reverse Landscape. Reverse Landscape prints the images upside down. " "
    • " "
  • Reverse Portrait. Reverse Portrait prints the image upside " "down.
The icon changes according to your selection.

" "
" "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

    -o orientation-requested=...       # examples: \"landscape\" or "
"\"reverse-portrait\"

" msgstr "" #: kpgeneralpage.cpp:192 msgid "" " " "

Duplex Printing: These controls may be grayed out if your printer " "does not support duplex printing (i.e. printing on both sides of the " "sheet). These controls are active if your printer supports duplex printing. " "

You can choose from 3 alternatives:

" "
    " "
  • None. This prints each page of the job on one side of the sheets " "only.
    • " "
  • Long Side. This prints the job on both sides of the paper sheets. " "It prints the job in a way so that the backside has the same orientation as the " "front side if you turn the paper over the long edge. (Some printer drivers " "name this mode duplex-non-tumbled).
    • " "
  • Short Side. This prints the job on both sides of the paper sheets. " "It prints the job so that the backside has the reverse orientation from the " "front side if you turn the paper over the long edge, but the same orientation, " "if you turn it over the short edge. (Some printer drivers name this mode " "duplex-tumbled).
" "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

    -o duplex=...       # examples: \"tumble\" or \"two-sided-short-edge\" "
"

" msgstr "" #: kpgeneralpage.cpp:218 msgid "" " " "

Banner Page(s): Select banner(s) to print one or two special sheets " "of paper just before or after your main job.

" "

Banners may contain some pieces of job information, such as user name, time " "of printing, job title and more.

" "

Banner pages are useful to separate different jobs more easily, especially " "in a multi-user environment.

" "

Hint: You can design your own banner pages. To make use of " "them, just put the banner file into the standard CUPS banners " "directory (This is usually \"/usr/share/cups/banner/\" " "Your custom banner(s) must have one of the supported printable formats. " "Supported formats are ASCII text, PostScript, PDF and nearly any image format " "such as PNG, JPEG or GIF. Your added banner pages will appear in the drop down " "menu after a restart of CUPS.

" "

CUPS comes with a selection of banner pages.

" "
" "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

    -o job-sheets=...       # examples: \"standard\" or \"topsecret\"  "
"

" msgstr "" #: kpgeneralpage.cpp:240 msgid "" " " "

Pages per Sheet: You can choose to print more than one page onto " "each sheet of paper. This is sometimes useful to save paper.

" "

Note 1: the page images get scaled down accordingly to print 2 or 4 " "pages per sheet. The page image does not get scaled if you print 1 page per " "sheet (the default setting.). " "

Note 2: If you select multiple pages per sheet here, the scaling and " "re-arranging is done by your printing system. Be aware, that some printers can " "by themselves print multiple pages per sheet. In this case you find the option " "in the printer driver settings. Be careful: if you enable multiple pages per " "sheet in both places, your printout will not look as you intended.

" "
" "
" "

Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

    -o number-up=...        # examples: \"2\" or \"4\"

" msgstr "" #: kpgeneralpage.cpp:264 kpqtpage.cpp:118 msgid "Page s&ize:" msgstr "Андозаи саҳи&фа:" #: kpgeneralpage.cpp:268 msgid "Paper t&ype:" msgstr "Намуди &варақ:" #: kpgeneralpage.cpp:272 msgid "Paper so&urce:" msgstr "Манба&ъи қоғаз:" #: kpgeneralpage.cpp:292 msgid "Duplex Printing" msgstr "Чопи дубора" #: kpgeneralpage.cpp:295 kpqtpage.cpp:143 msgid "Pages per Sheet" msgstr "Саҳифаи ҳар як варақ" #: kpgeneralpage.cpp:301 kpqtpage.cpp:125 msgid "&Portrait" msgstr "&Китобҷой" #: kpgeneralpage.cpp:302 kpqtpage.cpp:128 msgid "&Landscape" msgstr "&Албомӣ" #: kpgeneralpage.cpp:303 msgid "&Reverse landscape" msgstr "Ақиби &албомӣ" #: kpgeneralpage.cpp:304 msgid "R&everse portrait" msgstr "С&урати бозгашт" #: kpgeneralpage.cpp:309 msgid "" "_: duplex orientation\n" "&None" msgstr "&Не" #: kpgeneralpage.cpp:310 msgid "" "_: duplex orientation\n" "Lon&g side" msgstr "Паҳлӯи &дароз" #: kpgeneralpage.cpp:311 msgid "" "_: duplex orientation\n" "S&hort side" msgstr "Паҳлӯи &кӯтоҳ" #: kpgeneralpage.cpp:323 msgid "S&tart:" msgstr "&Оғоз:" #: kpgeneralpage.cpp:324 msgid "En&d:" msgstr "Ох&ир:" #: kpfileselectpage.cpp:33 msgid "&Files" msgstr "&Файлҳо" #: kpqtpage.cpp:70 msgid "" " Selection of color mode: You can choose between 2 options: " "
    " "
  • Color and
    • " "
  • Grayscale
Note: This selection field may be grayed " "out and made inactive. This happens if TDEPrint can not retrieve enough " "information about your print file. In this case the embedded color- or " "grayscale information of your printfile, and the default handling of the " "printer take precedence. " msgstr "" #: kpqtpage.cpp:79 msgid "" " Selection of page size: Select paper size to be printed on from " "the drop-down menu. " "

The exact list of choices depends on the printer driver (\"PPD\") you have " "installed. " msgstr "" #: kpqtpage.cpp:84 msgid "" " Selection of pages per sheet: You can choose to print more than " "one page onto each sheet of paper. This is sometimes useful to save paper. " "

Note 1: the page images get scaled down accordingly to print 2 or 4 " "pages per sheet. The page image does not get scaled if you print 1 page per " "sheet (the default setting.). " "

Note 2: If you select multiple pages per sheet here, the scaling and " "re-arranging is done by your printing system. " "

Note 3, regarding \"Other\": You cannot really select Other " "as the number of pages to print on one sheet.\"Other\" is checkmarked here for " "information purposes only. " "

To select 8, 9, 16 or other numbers of pages per sheet: " "

    " "
  • go to the tab headlined \"Filter\"
    • " "
  • enable the Multiple Pages per Sheet filter
    • " "
  • and configure it (bottom-most button on the right of the \"Filters\" tab). " "
" msgstr "" #: kpqtpage.cpp:102 msgid "" " Selection of image orientation: Orientation of the printed " "pageimage on your paper is controlled by the radio buttons. By default, the " "orientation is Portrait " "

You can select 2 alternatives: " "

    " "
  • Portrait..Portrait is the default setting.
    • " "
  • Landscape.
The icon changes according to your " "selection. " msgstr "" #: kpqtpage.cpp:113 msgid "Print Format" msgstr "Анзозаи чоп" #: kpqtpage.cpp:123 msgid "Color Mode" msgstr "Ҳолати ранг" #: kpqtpage.cpp:135 msgid "Colo&r" msgstr "Ра&нг" #: kpqtpage.cpp:138 msgid "&Grayscale" msgstr "&Сиёҳ ва сафед" #: kpqtpage.cpp:151 msgid "Ot&her" msgstr "Ди&гар" #: lpdunix/kmlpdunixmanager.cpp:210 msgid "Description unavailable" msgstr "Тасвирот дастрас намебошад" #: lpdunix/kmlpdunixmanager.cpp:220 lpdunix/kmlpdunixmanager.cpp:271 #: lpdunix/kmlpdunixmanager.cpp:318 lpdunix/kmlpdunixmanager.cpp:380 #, c-format msgid "Remote printer queue on %1" msgstr "Робитаи навбатии чоп дар %1" #: kprinterpropertydialog.cpp:78 kprinterpropertydialog.cpp:138 msgid "Printer Configuration" msgstr "Танзими чопгар" #: kprinterpropertydialog.cpp:138 msgid "No configurable options for that printer." msgstr "Чопгари додашуда танзим нахоҳад шуд!" #: kmvirtualmanager.cpp:161 msgid "" "You are about to set a pseudo-printer as your personal default. This " "setting is specific to TDE and will not be available outside TDE applications. " "Note that this will only make your personal default printer as undefined for " "non-TDE applications and should not prevent you from printing normally. Do you " "really want to set %1 as your personal default?" msgstr "" "Шумо псевдо-чопгарро мисли шахсии зикршуда қариб муқаррар кунед. Ин " "муқарраркунӣ ба KDA аниқ мебошад ва берун аз аризаҳои KDA дастур нест. Қайд " "кунед, ки ин чопгари шахсии зикршударо мисли номуқарраршуда барои аризаҳои " "на-KDA ва бояд аз чопкунии оддӣ шуморо халал нарасонад. Шумо дар ҳақиқатан " "мехоҳед %1 мисли шахсии зикршуда барқарор кунед?" #: rlpr/kmrlprmanager.cpp:47 rlpr/kmwrlpr.cpp:85 msgid "Empty host name." msgstr "Номи узел дода нашудааст." #: rlpr/kmrlprmanager.cpp:49 rlpr/kmwrlpr.cpp:87 msgid "Empty queue name." msgstr "Номи навбатӣ дода нашудааст." #: rlpr/kmrlprmanager.cpp:63 msgid "Printer not found." msgstr "Чопгар ёфт нашуд." #: rlpr/kmrlprmanager.cpp:75 msgid "Not implemented yet." msgstr "Ҳоло сабт нашудааст." #: rlpr/kmconfigproxy.cpp:29 msgid "Proxy" msgstr "Прокси:" #: rlpr/kmconfigproxy.cpp:30 msgid "RLPR Proxy Server Settings" msgstr "Танзими прокси-сервери RLPR" #: rlpr/kmproprlpr.cpp:49 rlpr/kmwrlpr.cpp:50 msgid "Remote LPD Queue Settings" msgstr "Танзимоти навбати робитавии LPD" #: rlpr/kmproxywidget.cpp:32 msgid "Proxy Settings" msgstr "Танзимоти прокси" #: rlpr/kmproxywidget.cpp:36 msgid "&Use proxy server" msgstr "&Бо истифода аз прокси-сервер" #: rlpr/kmwrlpr.cpp:124 msgid "Remote queue %1 on %2" msgstr "Робитаи навбатии %1 дар %2" #: rlpr/kmwrlpr.cpp:199 msgid "No Predefined Printers" msgstr "Чопгари таърифшудаи пештара низ мавҷуд намебошад" #: lpd/klpdprinterimpl.cpp:46 rlpr/krlprprinterimpl.cpp:53 msgid "" "The %1 executable could not be found in your path. Check your " "installation." msgstr "Барномаи %1 дар роҳи иҷроӣ ёфт нашуд. Танимоти худро биозмоед." #: rlpr/krlprprinterimpl.cpp:73 msgid "The printer is incompletely defined. Try to reinstall it." msgstr "Чопгар нодуруст таъриф шудааст. Кӯшиш кунед онро аз нав сабт намоед." #: kmspecialmanager.cpp:53 #, fuzzy msgid "" "A file share/tdeprint/specials.desktop was found in your local KDE directory. " "This file probably comes from a previous KDE release and should be removed in " "order to manage global pseudo printers." msgstr "" "Дар каталоги локалии TDE-и шумо файли share/tdeprint/specials.desktop ёфт шуд, " "ки пеш аз ҳама он аз раванди пештараи TDE монда буд ва бояд бо мақсади " "идоракунии pseudo-чопгарҳои глобалӣ, нобуд сохта шавад." #: kmjob.cpp:114 msgid "Queued" msgstr "Дар навбат" #: kmjob.cpp:117 msgid "Held" msgstr "Мононда шуд" #: kmjob.cpp:123 msgid "Canceled" msgstr "Барҳам дода шуд" #: kmjob.cpp:126 msgid "Aborted" msgstr "Канда шуд" #: kmjob.cpp:129 msgid "Completed" msgstr "Хотима дода шуд" #. i18n: file kprintpreviewui.rc line 13 #: rc.cpp:9 rc.cpp:21 #, no-c-format msgid "&PageMarks" msgstr "&Ишораҳои саҳифа" #: kmuimanager.cpp:158 #, c-format msgid "Configuration of %1" msgstr "Танзимоти %1" #: ext/kextprinterimpl.cpp:47 msgid "Empty print command." msgstr "Номи фармоноти чоп дода нашудааст." #: ext/kmextmanager.cpp:41 msgid "PS_printer" msgstr "PS_чопгар" #: ext/kmextmanager.cpp:43 msgid "PostScript file generator" msgstr "Генератори PostScript-и файл" #: kpposterpage.cpp:42 msgid " 5. " msgstr "" #: kpposterpage.cpp:46 msgid "" " Print Poster (enabled or disabled). " "

If you enable this option, you can print posters of different sizes The " "printout will happen in the form 'tiles' printed on smaller paper " "sizes, which you can stitch together later. If you enable this option " "here, the 'Poster Printing' filter will be auto-loaded in the " "'Filters' tab of this dialog.

" "

This tab is only visible if the external 'poster' " "utility is discovered by TDEPrint on your system. ['poster' " "is a commandline utility that enables you to convert PostScript files into " "tiled printouts which allow for oversized appearance of the stitched-together " "tiles.]

" "

Note: The standard version of 'poster' will not work. Your system " "must use a patched version of 'poster'. Ask your operating system vendor to " "provide a patched version of 'poster' if he does not already.

" msgstr "" #: kpposterpage.cpp:62 msgid "" " Tile Selection widget " "

This GUI element is not only for viewing " "your selections: it also lets you interactively select the tile(s) you want to " "print.

" "

Hints " "

    " "
  • Click any tile to select it for printing.
    • " "
  • To select multiple tiles to be printed at once, 'shift-click' " "on the tiles ('shift-click' means: hold down the [SHIFT]-key on your keyboard " "and click with the mouse while [SHIFT]-key is held.) Be aware " "that the order of your clicking is also significant to the order of printing " "the different tiles.
Note 1: The order of your selection " "(and the order for printout of the tiles) is indicated by the contents of the " "text field below, labelled as 'Tile pages (to be printed):'" "

Note 2: By default no tile is selected. Before you can print (a part " " of) your poster, you must select at least one tile.

" msgstr "" #: kpposterpage.cpp:83 msgid "" " Poster Size " "

Select the poster size you want from the dropdown list.

" "Available sizes are all standard paper sizes up to 'A0'. [A0 is the same size " "as 16 sheets of A4, or '84cm x 118.2cm'.]

" "

Notice, how the little preview window below changes with your change " "of poster size. It indicates to you how many tiles need to be printed to make " "the poster, given the selected paper size.

" "

Hint: The little preview window below is not just a passive icon. You " "can click on its individual tiles to select them for printing. To select " "multiple tiles to be printed at once, you need to 'shift-click' " "on the tiles ('shift-click' means: hold down the [SHIFT]-key on your keyboard " "and click with the mouse while [SHIFT]-key is held.) The order of your " "clicking is significant to the order of printing the different tiles. The order " "of your selection (and for the printed tiles) is indicated by the contents of " "the text field labelled as 'Tile pages (to be printed):'" "

Note: By default no tile is selected. Before you can print (a part " "of) your poster, you must select at least one tile.

" msgstr "" #: kpposterpage.cpp:102 msgid "" " Paper Size " "

This field indicates the paper size the poster tiles will be printed on. To " "select a different paper size for your poster tiles, go to the 'General' tab " "of this dialog and select one from the dropdown list.

" "Available sizes are most standard paper sizes supported by your printer. Your " "printer's supported paper sizes are read from the printer driver info (as laid " "down in the 'PPD', the printer description file). " "Be aware that the 'Paper Size' selected may not be supported by 'poster' " "(example: 'HalfLetter') while it may well be supported by your printer. " "If you hit that obstacle, simply use another, supported Paper Size, like 'A4' " "or 'Letter'. " "

Notice, how the little preview window below changes with your change " "of paper size. It indicates how many tiles need to be printed to make up the " "poster, given the selected paper and poster size.

" "

Hint: The little preview window below is not just a passive icon. You " "can click on its individual tiles to select them for printing. To select " "multiple tiles to be printed at once, you need to 'shift-click' " "on the tiles ('shift-click' means: hold down the [SHIFT]-key on your keyboard " "and click with the mouse while [SHIFT]-key is held.) The order of your " "clicking is significant to the order of printing the different tiles. The order " "of your selection (and for the printed tiles) is indicated by the contents of " "the text field labelled as 'Tile pages (to be printed):'" "

Note: By default no tile is selected. Before you can print (a part " "of) your poster, you must select at least one tile.

" msgstr "" #: kpposterpage.cpp:126 msgid "" " Cut Margin selection " "

Slider and spinbox let you determine a 'cut margin' " "which will be printed onto each tile of your poster to help you cut the pieces " "as needed.

" "

Notice, how the little preview window above changes with your change " "of cut margins. It indicates to you how much space the cut margins will take " "away from each tile. " "

Be aware, that your cut margins need to be equal to or greater than " "the margins your printer uses. The printer's capabilities are described in the " "'ImageableArea' keywords of its driver PPD file.

" msgstr "" #: kpposterpage.cpp:137 msgid "" " Order and number of tile pages to be printed " "

This field displays and sets the individual tiles to be printed, as well as " "the order for their printout.

You can file the field with 2 different " "methods: " "
    " "
  • Either use the interactive thumbnail preview above and '[SHIFT]-click' on " "the tiles.
    • " "
  • Or edit this text field accordingly.
" "

When editing the field, you can use a '3-7' syntax instead of a '3,4,5,6,7' " "one.

" "

Examples:

" "
    \"2,3,7,9,3\"  "
"
    \"1-3,6,8-11\"  "
msgstr ""

#: kpposterpage.cpp:154
msgid "Poster"
msgstr "Плакат"

#: kpposterpage.cpp:156
msgid "&Print poster"
msgstr "&Чопи плакат"

#: kpposterpage.cpp:170
msgid "Poste&r size:"
msgstr "&Андозаи плакат:"

#: kpposterpage.cpp:172
msgid "Media size:"
msgstr "Андозаи муқаррар:"

#: kpposterpage.cpp:174
msgid "Pri&nt size:"
msgstr "Андозаи чо&п:"

#: kpposterpage.cpp:181
#, no-c-format
msgid "C&ut margin (% of media):"
msgstr "&Лабаҳои ақиб гардӣ (% формат)"

#: kpposterpage.cpp:185
msgid "&Tile pages (to be printed):"
msgstr "&Тақсим кардани саҳифаҳо (барои чопкунӣ):"

#: kpposterpage.cpp:192
msgid "Link/unlink poster and print size"
msgstr "Пайваст/бидуни пайваст кардани постер ва андозаи чоп"

#: kpposterpage.cpp:257
msgid "Unknown"
msgstr "Номуайян"

#: kprinter.cpp:690 tdeprintd.cpp:158
#, c-format
msgid ""
"
A print error occurred. Error message received from system:
"
"
%1"
msgstr "
хАтои чоп. Иттилооти системаи чоп:

%1"

#: tdeprintd.cpp:176
msgid ""
"Some of the files to print are not readable by the TDE print daemon. This may "
"happen if you are trying to print as a different user to the one currently "
"logged in. To continue printing, you need to provide root's password."
msgstr ""
"Якеи файлҳо барои чоп бо daemon-и чопи TDE низ хонда нахоҳад шуд.Сабаби "
"эҳтимолӣ - кӯшиши чоп на аз номи истифодакунанда мебошад, ки ба система вуруд "
"шуда буд. Барои давом додани чоп, гузарвожаи root-ро гузоштан лозим аст."

#: tdeprintd.cpp:181
msgid "Provide root's Password"
msgstr "Гузарвожаи root-ро гузоред"

#: tdeprintd.cpp:200 tdeprintd.cpp:202
#, c-format
msgid "Printing Status - %1"
msgstr "Ҳоли чоп - %1"

#: tdeprintd.cpp:263
msgid "Printing system"
msgstr "Системаи чоп"

#: tdeprintd.cpp:266
msgid "Authentication failed (user name=%1)"
msgstr "Хатои муайян кардани истифодакунанда (номи истифодакунанда=%1)"

#: kprinter.cpp:280
msgid "Initialization..."
msgstr "Ташаббускорӣ..."

#: kprinter.cpp:283 kprinter.cpp:909
#, c-format
msgid "Generating print data: page %1"
msgstr "Генератсияи додашудаи чоп: саҳифаи %1"

#: kprinter.cpp:429
msgid "Previewing..."
msgstr "Пешнамоиш..."

#: driverview.cpp:47
msgid ""
"   List of Driver Options (from PPD).  "
"
The upper pane of this dialog page contains all printjob options as laid  "
"down in the printer's description file (PostScript Printer Description == "
"'PPD') 
 "
"
Click on any item in the list and watch the lower pane of this dialog page  "
"display the available values. 
  "
"
Set the values as needed. Then use one of the pushbuttons below to "
"proceed:
  "
"
      "
"
  • 'Save' your settings if you want to re-use  them in your next "
"job(s) too. 'Save' will store your settings permanently until  you "
"change them again. 
    • . "
"
  • Click 'OK' (without a prior click on 'Save'"
", if you want to use  your selected settings just once, for the next print job. "
"'OK'  will forget your current settings when kprinter is closed again, "
"and will start next time  with the previously saved defaults. 
    •  "
"
  • 'Cancel' will not change anything. If you proceed to print after "
"clicking  'Cancel', the job will print with the default settings of "
"this queue.  
 "
"
Note. The number of available job options depends strongly on the "
"actual  driver used for your print queue. 'Raw' "
"queues do not have a driver or a   PPD. For raw queues this tab page is not "
"loaded by TDEPrint, and thus is not present  in the kprinter dialog.
  "
msgstr ""

#: driverview.cpp:71
msgid ""
"   List of Possible Values for given Option (from PPD).  "
"
The lower pane of this dialog page contains all possible values of the "
"printoption  highlighted above, as laid  down in the printer's description file "
"(PostScript Printer Description == 'PPD') 
 "
"
Select the value you want and proceed. 
  "
"
Then use one of the pushbuttons below to leave this dialog:
  "
"
      "
"
  • 'Save' your settings if you want to re-use  them in your next "
"job(s) too. 'Save' will store your settings permanently until  you "
"change them again. 
    • . "
"
  • Click 'OK' if you want to use your selected settings just once, "
"for the  next print job. 'OK'  will forget your current settings when "
"kprinter is closed again, and will start next time  with your previous "
"defaults. 
    •  "
"
  • 'Cancel' will not change anything. If you proceed to print after "
"clicking  'Cancel', the job will print with the default settings of "
"this queue.  
 "
"
Note. The number of available job options depends strongly on the "
"actual  driver used for your print queue. 'Raw' "
"queues do not have a driver or a   PPD. For raw queues this tab page is not "
"loaded by TDEPrint, and thus is not present  in the kprinter dialog.
  "
msgstr ""

#: kpcopiespage.cpp:46
#, fuzzy
msgid ""
" "
"
Page Selection
  "
"
Here you can control if you print a certain selection only out of all the "
"pages from the complete document. 
 "
msgstr ""
" Дар ин ҷо шумо чоп кардани интихоби муяйян барои ҳамаи саҳифаҳоро "
"баровардан аз cанади пурра, муқаррар кунед."

#: kpcopiespage.cpp:51
#, fuzzy
msgid ""
" All Pages: Select \"All\" to print the complete document. Since "
"this is the default, it is pre-selected. 
 "
msgstr ""
" \"Ҳама\" интихоб кунед барои чоп кардани ин ҳуҷҷат. Ин амалиёт пешфарз "
"аст."

#: kpcopiespage.cpp:55
#, fuzzy
msgid ""
" Current Page: Select \"Current\" "
"if you want  to print the page currently visible in your KDE application.
 "
"
Note: this field is disabled if you print from non-TDE applications "
"like Mozilla or OpenOffice.org, since here TDEPrint has no means to determine "
"which document page you are currently viewing.
"
msgstr ""
" "
"
Интихоб \"Ҷараён\"кунед, агар шумо мехоҳед, cаҳифаи ҷараёнро дар "
"аризаи TDE дидашаванда, чоп кунед.
 "
"
Қайд: ин фосила кор намекунад агао шумо аз аз но-KDA аризаҳо мисли "
"Mozilla ё OpenOffice.org чоп кунед ,дар инҷо TDEЧоп наметавонад кадом санадро "
"шумо ҷараён карда нишон медиҳед, муқаррар карда наметавонад.
"

#: kpcopiespage.cpp:60
#, fuzzy
msgid ""
" Page Range: Choose a \"Page Range\" to select a subset of the "
"complete document pages to be printed. The format is "
"\"n,m,o-p,q,r,s-t, u\".
 "
"
Example: \"4,6,10-13,17,20,23-25\" "
"will print the pages 4, 6, 10, 11, 12, 13, 17, 20, 23, 24, 25 of your "
"document.
 "
"
  "
"
  "
"
Additional hint for power users: This TDEPrint GUI element "
"matches  with the CUPS commandline job option parameter:  "
"
    -o page-ranges=...     # example: \"4,6,10-13,17,20,23-25\"  
 "
"
 "
msgstr ""
""
"
\"Диапазони Саҳифа\"-ро барои бисёри пурраи саҳифаҳои санадро чоп кардан, "
"интихоб кунед. Формат ин \"n,m,o-p,q,r,s-t, u\".
 "
"
Мисол\"n,m,o-p,q,r,s-t, u\".
 дар саҳифаҳои 4, 6, 10, 11, 12, "
"13, 17, 20, 23, 24, 25 санади шумо, чоп карда мешаванд.
"

#: kpcopiespage.cpp:74
#, fuzzy
msgid ""
" Page Set: "
"
Choose \"All Pages\", \"Even Pages\" or "
"\"Odd Pages\" if you want to print a page selection matching one of these "
"terms. The default is \"All Pages\".
 "
"
Note: If you combine a selection of a \"Page Range\" "
"with a \"Page Set\" of \"Odd\" or \"Even\""
", you will only get the odd or even pages from the originally selected page "
"range. This is useful if you odd or even pages from the originally selected "
"page range. This is useful if you want to print a page range in duplex on a "
"simplex-only printer. In this case you can feed the paper to the printer twice; "
"in the first pass, select \"Odd\" or \"Even\" (depending on your printer "
"model), in second pass select the other option. You may need to "
"\"Reverse\" the output in one of the passes (depending on your printer "
"model).
  "
"
  "
"
  "
"
Additional hint for power users: This TDEPrint GUI element "
"matches  with the CUPS commandline job option parameter:  "
"
    -o page-set=...        # example: \"odd\" or \"even\"  
 
  "
""
msgstr ""
" Агар шумо мехоҳед саҳифаи интихобшуда яке аз ин терминҳоро мутобиқ кунед, "
"чоп кунед инҳоро \"Ҳамаи Саҳифаҳо\",\"Саҳифаҳои Мураттаб\" "
"ё \"Саҳифаҳои Ҷуфт\" интихоб кунед. Зикршуда "
"\"Ҳамаи Саҳифаҳо\".
 "
"
Қайд: Агар шумо ҷамъ кардани интихоби \"Диапазони Саҳифа\" "
"бо \"Ҳарфчини кардани Саҳифа\" аз \"Ҷуфт\" ё "
"\"Мураттаб\", шумо фақат ҷуфтро ё саҳифаҳои мураттабро аз намуди диапазони "
"саҳифа. Ин барои агар шумо мехоҳед дипазони саҳифа бо дуплекс дар методи "
"чопгар. Дар ин кор шумо дубор қоғаз ба чопгар дароред, бори аввал \"Ҷуфт\" ё "
"\"Мураттаб\"(вобаста ба намуди чопгаратон) интихоб кунед, бори дуввум параметри "
"дигарро интихоб кунед. Ба шумо \"Бозгашт\" баровардани яке аз борҳо "
"(вобаста ба намуди чопгар).
  "

#: kpcopiespage.cpp:97
msgid ""
" Output Settings: Here you can determine the number of copies, the "
"output order and the collate mode for the pages of your printjob. (Note, that "
"the maximum number of copies  allowed to print may be restricted by your print "
"subsystem.)
 "
"
The 'Copies' setting defaults to 1. 
  "
"
  "
"
  "
"
Additional hint for power users: This TDEPrint GUI element "
"matches  with the CUPS commandline job option parameter:  "
"
     -o copies=...            # examples: \"5\" or \"42\"  "
"
     -o outputorder=...       # example:  \"reverse\" "
"
     -o Collate=...           # example:  \"true\" or \"false\"  
 
 "
"."
msgstr ""

#: kpcopiespage.cpp:115
#, fuzzy
msgid ""
" Number of Copies: Determine the number of requested copies here. "
"You can increase or decrease the number of printed copies by clicking on the up "
"and down arrows. You can also type the figure directly into the box. 
 "
"
  "
"
  "
"
Additional hint for power users: This TDEPrint GUI element "
"matches  with the CUPS commandline job option parameter:  "
"
     -o copies=...            # examples: \"5\" or \"42\"  
 
  "
""
msgstr ""
" Рақамҳои нусхаҳои дархостро дар инҷо муқаррар кунед. Бо пахши тирчаҳои "
"боло ва поён шумо метавонед кам ва зиёд кунед. Шумо инчунин метавонед, ҳарфи "
"рост ба қуттӣ чоп кунед."

#: kpcopiespage.cpp:128
#, fuzzy
msgid ""
" Collate Copies "
"
If the \"Collate\" checkbox is enabled (default), the output order "
"for multiple copies of a multi-page document will be \"1-2-3-..., 1-2-3-..., "
"1-2-3-...\".
 "
"
If the \"Collate\" checkbox is disabled, the output order for "
"multiple copies of a multi-page document will be \"1-1-1-..., 2-2-2-..., "
"3-3-3-...\".
 "
"
  "
"
  "
"
Additional hint for power users: This TDEPrint GUI element "
"matches  with the CUPS commandline job option parameter:  "
"
    -o Collate=...           # example:  \"true\" or \"false\"  
 
  "
""
msgstr ""
" "
"
Агар \"Ҷамъ кардан\" қуттии санҷишҳо ҳал карда(зикр кардашуда), "
"баромади қоидаи чанд-саҳифаи санад ин хел мешавад\"1-2-3-..., 1-2-3-..., "
"1-2-3-...\".
 "
"
Агар \"Ҷамъ кардан\" қуттии санҷишҳо кушта мешавад, баромади  "
"қоидаи чанд-саҳифаи санад ин хел мешавад  \"1-1-1-..., 2-2-2-..., "
"3-3-3-...\".
"

#: kpcopiespage.cpp:142
#, fuzzy
msgid ""
" Reverse Order "
"
 If the \"Reverse\" checkbox is enabled, the output order for "
"multiple copies of a multi-page document will be \"...-3-2-1, ...-3-2-1, "
"...-3-2-1\", if you also have enabled the \"Collate\" "
"checkbox at the same time (the usual usecase).
 "
"
If the \"Reverse\" checkbox is enabled, the output order for "
"multiple copies of a multi-page document will be \"...-3-3-3, ...-2-2-2, "
"...-1-1-1\", if you have disabled the \"Collate\" "
"checkbox at the same time. 
 "
"
  "
"
  "
"
Additional hint for power users: This TDEPrint GUI element "
"matches  with the CUPS commandline job option parameter:  "
"
    -o outputorder=...       # example:  \"reverse\"  
 
  "
msgstr ""
" "
"
Агар \"Reverse\" қутии санҷишҳоро ҳал карда бошад, қоидаи баромади "
"чанд-саҳифаи санад ин хел мешавад \"...-3-2-1, ...-3-2-1, ...-3-2-1\"ва агар "
"шумо инчунин \"Ҷамъ кардан\"ва қутии санҷиширо дар ҳамон вақт "
"ҳал карда бошед( истифодаи кори оддӣ).
 "
"
Агар \"Reverse\" қутии санҷишҳоро ҳал карда бошад, қоидаи баромади "
"чанд-саҳифаи санад ин хел мешавад \"...-3-3-3, ...-2-2-2, ...-1-1-1\"ва агар "
"шумо инчунин \"Ҷамъ кардан\"ва қутии санҷиширо дар ҳамон вақт 
 "
"кушед"

#: kpcopiespage.cpp:163
msgid "C&opies"
msgstr "&Нусхаҳо"

#: kpcopiespage.cpp:167
msgid "Page Selection"
msgstr "Интихоби саҳифа"

#: kpcopiespage.cpp:169
msgid "&All"
msgstr "&Ҳама"

#: kpcopiespage.cpp:171
msgid "Cu&rrent"
msgstr "Ра&вон"

#: kpcopiespage.cpp:173
msgid "Ran&ge"
msgstr "&Қатор"

#: kpcopiespage.cpp:178
msgid ""
"
Enter pages or group of pages to print separated by commas (1,2-5,8).
"
msgstr "
Рақам ёки диапозони саҳифаро дохил кунед (мисол: 1,2-5,8).
"

#: kpcopiespage.cpp:182
#, fuzzy
msgid "Output Settings"
msgstr "Танзимоти саҳм"

#: kpcopiespage.cpp:184
msgid "Co&llate"
msgstr "Тафтиши &варақаҳо"

#: kpcopiespage.cpp:186
msgid "Re&verse"
msgstr "Ба тартиби &баръакс"

#: kpcopiespage.cpp:191
msgid "Cop&ies:"
msgstr "&Нусхаҳо:"

#: kpcopiespage.cpp:198
msgid "All Pages"
msgstr "Тамоми саҳифаҳо"

#: kpcopiespage.cpp:199
msgid "Odd Pages"
msgstr "Саҳифаҳои тоқ"

#: kpcopiespage.cpp:200
msgid "Even Pages"
msgstr "Саҳифаҳои ҷуфт"

#: kpcopiespage.cpp:202
msgid "Page &set:"
msgstr "Набори &саҳифаҳо:"

#: kpcopiespage.cpp:257
msgid "Pages"
msgstr "Саҳифаҳо"

#: plugincombobox.cpp:33
#, fuzzy
msgid ""
" Print Subsystem Selection "
"
This combo box shows (and lets you select) a print subsystem to be used by "
"TDEPrint. (This print subsystem must, of course, be installed inside your "
"Operating System.) TDEPrint usually auto-detects the correct print subsystem by "
"itself upon first startup. Most Linux distributions have \"CUPS\", the "
"Common UNIX Printing System. "
msgstr ""
" Ин қутии ташкилот (иҷозат барои интихоб кардан)  субсистемаи чоп кардан аз "
"тарафи TDEЧоп истифода бурда мешавад.(Ин чопи субсистема бояд, дар даруни "
"Системаи Оператсионии худатон, барқарор карда бошад.) TDEЧоп баъзевақт худаш "
"кафш мекунад. Аксарияти тақсимкунандагони Linux \"CUPS\" доранд, "
"Чоп кардани Системаи Умумии Unix. "

#: plugincombobox.cpp:45
msgid "Print s&ystem currently used:"
msgstr "С&истемаи чопи истифодашаванда:"

#: plugincombobox.cpp:91
#, fuzzy
msgid ""
" Current Connection "
"
This line shows which CUPS server your PC is currently connected to for "
"printing and retrieving printer info. To switch to a different CUPS server, "
"click \"System Options\", then select \"Cups server\" and fill in the required "
"info. "
msgstr ""
"  Ин хат ба кадом будани сервери CUPS Компютери шумо ҷараён пайваст шуда "
"барои чоп кардан ва гирифтани ахбороти чопгар, нишон медиҳад. Гирён кардан ба "
"сервери ҳархелаи CUPS, \"Системаи Интихоб\" пахш кунед, баъд \"Сервери CUPS\" "
"-ро интихоб кунед ва ахбороти даркорири пур кунед."

#: tdefilelist.cpp:42
#, fuzzy
msgid ""
"  Add File button "
"
This button calls the 'File Open' dialog to let you select a file "
"for printing. Note, that  "
"
    "
"
  • you can select ASCII or International Text, PDF, PostScript, JPEG, TIFF, "
"PNG, GIF and many other graphic formats. "
"
  • you can select various files from different paths and send them as one "
"\"multi-file job\" to the printing system. 
 "
msgstr ""
"  Ин тугма диалоги \"Кушодани Файл\" дархост карда барои иҷозат додан ба ту "
"интихоб кардани файл барои чоп кардан. Қайд, ки  "
"
    "
"
  •  шумо метавонед ASCII ё Матни Интернатсионалӣ, PDF, PostScript, JPEG, TIFF, "
"PNG, GIF  ва ғайра графики форматҳоро интихоб кунед. "
"
  • шумо метавонед файлҳои ҳархеларо аз роҳҳои гуногун интихоб карда ва онҳоро "
"яктогӣ \"кори чанд-файла\" ба системаи чопкунӣ фиристонед.
 "

#: tdefilelist.cpp:54
#, fuzzy
msgid ""
"  Remove File button "
"
This button removes the highlighted file from the list of to-be-printed "
"files. "
msgstr ""
"  Ин тугма файли рӯшансозро аз рӯхати файли чопшаванда ҷудо мекунад."

#: tdefilelist.cpp:59
#, fuzzy
msgid ""
"  Move File Up button "
"
This button moves the highlighted file up in the list of files to be "
"printed.
 "
"
In effect, this changes the order of the files' printout.
 "
msgstr ""
"  "
"
Ин тугма файли рӯшансозро ба болои рӯйхати файлҳое, ки чоп карда мешаванд, "
"мегузаронад.
 "
"
Дар натиҷа, ин рӯйхати файлҳои чопкардашударо дигар мекунад.
 "

#: tdefilelist.cpp:66
#, fuzzy
msgid ""
"  Move File Down button "
"
This button moves the highlighted file down in the list of files to be "
"printed.
 "
"
In effect, this changes the order of the files' printout.
 "
msgstr ""
" "
"
Ин тугма файли рӯшансозро ба поёни рӯйхати файлҳое, ки чоп карда мешаванд, "
"мегузаронад.
 "
"
Дар натиҷа, ин рӯйхати файлҳои чопкардашударо дигар мекунад.
 "

#: tdefilelist.cpp:73
#, fuzzy
msgid ""
"  File Open button "
"
This button tries to open the highlighted file, so you can view or edit it "
"before you send it to the printing system.
 "
"
If you open files, TDEPrint will use the application matching the MIME type "
"of the file.
 "
msgstr ""
"  "
"
Ин тугма кушиш мекунад, ки файли рӯшансозро кушояд, ва шумо метавонед инро "
"нигоҳ ва вироиш кунед пеш аз фиристондан ба системаи чопкунӣ.
 
 "
"Агар шумо файлҳоро кушоед, TDEЧоп корбурдро истифода бурда, татбиқи MIME намуди "
"файл.
 "

#: tdefilelist.cpp:82
#, fuzzy
msgid ""
"  File List view "
"
This list displays all the files you selected for printing. You can see the "
"file name(s), file path(s) and the file (MIME) type(s) as determined by "
"TDEPrint. You may re-arrange the  initial order of the list  with the help of "
"the arrow buttons on the right.
 "
"
The files will be printed as a single job, in the same order as displayed in "
"the list.
 "
"
Note: You can select multiple files. The files may be in multiple "
"locations. The files may be of multiple MIME types. The buttons on the right "
"side let you add more files, remove already selected files from the list,  "
"re-order the list (by moving files up or down), and open files. If you open "
"files, TDEPrint will use the application matching the MIME type of the file.
 "
""
msgstr ""
" "
"
Ин рӯйхат ҳамаи файлҳои, ки ту интихоб кардӣ, нишон медиҳад. Шумо метавонед "
"ҳамаи ном(ҳо)и файл, роҳ(ҳо)и файл ва файли чоп(ҳо)и файли (MIME) ки бо TDEЧоп "
"муқаррар карда мешавад. Оғози дастури рӯйхат дар интихоби аввала.
 "
"
Лист дар ҳамон дастур, ки дар охир нишон дода буд, чоп карда мешавад.
 "
"
Қайд:Шумо файлҳои бисёрмаротибаро интихоб кардед. Файл дар ҷойҳо "
"тақсим карда мешавад. Файлҳо мумкин дар чопҳои MIME тақсим карда мешаванд. "
"Тугмаҳои дар тарафи рост ба шумо иҷозат медиҳанд боз файлҳои дохил кунед, "
"гирифтани файлҳои аллакай интихобшуда аз лист, бори дигар листро ба қоида "
"меоварад (бо ҷунбондани файл ба боло ва поён), ва файлҳоро кушоед. Агар шумо "
"файлҳоро кушоед, TDEЧоп корбурдро истифода бурда чопи файли MIME татбиқ карда "
"мешаванд.
 "

#: tdefilelist.cpp:103
msgid "Path"
msgstr "Роҳ"

#: tdefilelist.cpp:115
msgid "Add file"
msgstr "Иловаи файл"

#: tdefilelist.cpp:121
msgid "Remove file"
msgstr "Нобуд кардани файл"

#: tdefilelist.cpp:128
msgid "Open file"
msgstr "Кушодани файл"

#: tdefilelist.cpp:149
msgid ""
"Drag file(s) here or use the button to open a file dialog. Leave empty for "
"<STDIN>."
msgstr ""
"Файлҳоро ба инҷо кашида биёред ёки кнопкаро барои боз кардани диалоги интихоби "
"файл, истифода кунед. Холӣ монед, барои <STDIN>."

#: droptionview.cpp:61
msgid "Value:"
msgstr "Аҳамият:"

#: droptionview.cpp:167
msgid "String value:"
msgstr "Сатр:"

#: droptionview.cpp:306 droptionview.cpp:341
msgid "No Option Selected"
msgstr "Ягон параметри интихобшудае нест"

#: lpd/kmlpduimanager.cpp:44
msgid "Local printer (parallel, serial, USB)"
msgstr "Чопгари локалӣ (параллелӣ, пасравӣ, USB)"

#: lpd/kmlpduimanager.cpp:46
msgid "SMB shared printer (Windows)"
msgstr "Чопгари SMB (Windows)"

#: lpd/kmlpduimanager.cpp:47
msgid "Network printer (TCP)"
msgstr "Чопгари шабақа (TCP)"

#: lpd/kmlpduimanager.cpp:48
msgid "File printer (print to file)"
msgstr "Чопгари файл (ба файл чоп кунед)"

#: lpd/lpdtools.cpp:31
msgid "A4"
msgstr "A4"

#: lpd/lpdtools.cpp:32
msgid "A3"
msgstr "A3"

#: lpd/lpdtools.cpp:33
msgid "B4"
msgstr "B4"

#: lpd/lpdtools.cpp:34
msgid "B5"
msgstr "B5"

#: lpd/lpdtools.cpp:233
msgid "GhostScript settings"
msgstr "Танзимоти GhostScript"

#: lpd/lpdtools.cpp:254
msgid "Resolution"
msgstr "Иҷозат"

#: lpd/lpdtools.cpp:277
msgid "Color depth"
msgstr "Қаъри ранг"

#: lpd/lpdtools.cpp:301
msgid "Additional GS options"
msgstr "Параметрҳои иловагии GS"

#: lpd/lpdtools.cpp:313
msgid "Page size"
msgstr "Андозаи саҳифа"

#: lpd/lpdtools.cpp:329
msgid "Pages per sheet"
msgstr "Саҳифа ба ҳар як варақ"

#: lpd/lpdtools.cpp:345
msgid "Left/right margin (1/72 in)"
msgstr "Заминаи чап/рост (1/72 дюйм)"

#: lpd/lpdtools.cpp:350
msgid "Top/bottom margin (1/72 in)"
msgstr "Заминаи болоӣ/поёна (1/72 дюйм)"

#: lpd/lpdtools.cpp:356
msgid "Text options"
msgstr "Хусусияти матн"

#: lpd/lpdtools.cpp:362
msgid "Send EOF after job to eject page"
msgstr "Фиристодани EOF баъди анҷомдиҳии масъалабарои баровардани саҳифа"

#: lpd/lpdtools.cpp:370
msgid "Fix stair-stepping text"
msgstr "Таъсири зинапоявии матнро соз кунед"

#: lpd/lpdtools.cpp:382
msgid "Fast text printing (non-PS printers only)"
msgstr "Матнро тезтар чоп намоед (танҳо бидуни чопгарҳои-PS)"

#: lpd/kmlpdmanager.cpp:87
msgid "Local printer queue (%1)"
msgstr "Навбати чопгари локалӣ (%1)"

#: lpd/kmlpdmanager.cpp:87
msgid ""
"_: Unknown type of local printer queue\n"
"Unknown"
msgstr "Ношинос"

#: lpd/kmlpdmanager.cpp:88
msgid ""
msgstr "<бидуни>"

#: lpd/kmlpdmanager.cpp:89
msgid ""
"_: Unknown Driver\n"
"Unknown"
msgstr "Ношинос"

#: lpd/kmlpdmanager.cpp:95
msgid "Remote LPD queue %1@%2"
msgstr "Навбати чопгари шабақа (%1@%2)"

#: lpd/kmlpdmanager.cpp:158
msgid "Unable to create spool directory %1 for printer %2."
msgstr "Қодир ба сохтани каталоги ғалтаки %1 барои чопгари %2 нестам."

#: lpd/kmlpdmanager.cpp:165
msgid "Unable to save information for printer %1."
msgstr "Қодир ба нигоҳ доштани иттилоот дар бораи чопгари %1 нестам."

#: lpd/kmlpdmanager.cpp:193
msgid ""
"Unable to set correct permissions on spool directory %1 for printer %2."
msgstr ""
"Натавонистам ҳуқуқи дастрасӣ барои ғалтаки %1 чопгари %2 бисозам."

#: lpd/kmlpdmanager.cpp:237
msgid "Permission denied: you must be root."
msgstr "Ҳуқуқи даромадан маън аст: ба Шумо ҳуқуқи root лозим аст."

#: lpd/kmlpdmanager.cpp:244
msgid "Unable to execute command \"%1\"."
msgstr "Натавонистам барномаи \"%1\"-ро ба кор дарорам."

#: lpd/kmlpdmanager.cpp:317
msgid "Unable to write printcap file."
msgstr "Файли printcap-ро навишта натавониста истодаам."

#: lpd/kmlpdmanager.cpp:372
msgid "Couldn't find driver %1 in printtool database."
msgstr "Наметавонам драйвери %1-ро дар базаи дода шудаи printtool ёбам."

#: lpd/kmlpdmanager.cpp:411
msgid "Couldn't find printer %1 in printcap file."
msgstr "Чопгари %1 дар файли printcap ҳозир намебошад."

#: lpd/kmlpdmanager.cpp:440
msgid "No driver found (raw printer)"
msgstr "Драйвер ёфт нашуд (raw-чопгар)"

#: lpd/kmlpdmanager.cpp:442
msgid "Printer type not recognized."
msgstr "Чопгари намуди номуайян."

#: lpd/kmlpdmanager.cpp:452
msgid ""
"The driver device %1 is not compiled in your GhostScript distribution. "
"Check your installation or use another driver."
msgstr ""
"Драйвери дастгоҳи %1 дар дистрибутиви GhostScript-и шумо дохил "
"нашудааст. Дастгоҳро бисанҷед ё дигар драйверро ба истифода баред."

#: lpd/kmlpdmanager.cpp:560
msgid "Unable to write driver associated files in spool directory."
msgstr "Қодир ба навиштани файлҳои драйверро ба каталоги ғалтак нестам."

#: driver.cpp:387
msgid "JCL"
msgstr "JCL"

#: kxmlcommand.cpp:789
msgid "One of the command object's requirements is not met."
msgstr "Якеи аз шартҳои объекти фармон иҷро нашудааст."

#: kxmlcommand.cpp:797 kxmlcommand.cpp:802
#, c-format
msgid "The command does not contain the required tag %1."
msgstr "Дар фармони tag %1-и талабкунанда мавҷуд нест."

#: kpfilterpage.cpp:42
msgid ""
"  Add Filter button "
"
This button calls a little dialog to let you select a filter here. 
 "
"
Note 1: You can chain different filters as long as you make  sure "
"that the output of one fits as input of the next. (TDEPrint  checks your "
"filtering chain and will warn you if you fail to do so.
  "
"
Note 2: The filters you define here are applied to your jobfile  "
"before it is handed downstream to your spooler and print  subsystem "
"(e.g. CUPS, LPRng, LPD).
  "
msgstr ""

#: kpfilterpage.cpp:54
#, fuzzy
msgid ""
"  Remove Filter button "
"
This button removes the highlighted filter from the list of filters. "
msgstr ""
"  Ин тугма файли рӯшансозро аз рӯхати файли чопшаванда ҷудо мекунад."

#: kpfilterpage.cpp:59
#, fuzzy
msgid ""
"  Move Filter Up button "
"
This button moves the highlighted filter up in the list of filters, towards "
"the front of the filtering chain. 
 "
msgstr ""
"  "
"
Ин тугма файли рӯшансозро ба болои рӯйхати файлҳое, ки чоп карда мешаванд, "
"мегузаронад.
 "
"
Дар натиҷа, ин рӯйхати файлҳои чопкардашударо дигар мекунад.
 "

#: kpfilterpage.cpp:64
#, fuzzy
msgid ""
"  Move Filter Down button "
"
This button moves the highlighted filter down in the list of filters, "
"towards the end of the filtering chain..
 "
msgstr ""
" "
"
Ин тугма файли рӯшансозро ба поёни рӯйхати файлҳое, ки чоп карда мешаванд, "
"мегузаронад.
 "
"
Дар натиҷа, ин рӯйхати файлҳои чопкардашударо дигар мекунад.
 "

#: kpfilterpage.cpp:69
#, fuzzy
msgid ""
"  Configure Filter button "
"
This button lets you configure the currently highlighted filter. It opens a "
"separate dialog.  
 "
msgstr ""
"  Ин тугма файли рӯшансозро аз рӯхати файли чопшаванда ҷудо мекунад."

#: kpfilterpage.cpp:75
msgid ""
"  Filter Info Pane "
"
This field shows some general info about the selected filter.  Amongst them "
"are:  "
"
      "
"
  • the filter name (as displayed in the TDEPrint user interface); "
"
    •   "
"
  • the filter requirements (that is the external program that needs  "
"to present and executable on this system); 
    •   "
"
  • the filter input format (in the form of one or several "
"MIME types accepted by the filter); 
    •   "
"
  • the filter output format (in the form of a MIME type  "
"generated by the filter); 
    •   "
"
  • a more or less verbose text describing the filter's operation.
    •   
  "
"
 "
msgstr ""

#: kpfilterpage.cpp:91
msgid ""
"  Filtering Chain (if enabled, is run before "
"actual  job submission to print system) "
"
This field shows which filters are currently selected to act as "
"'pre-filters'  for TDEPrint. Pre-filters are processing the print files "
"before they are  send downstream to your real print subsystem. 
  "
"
The list shown in this field may be empty (default). 
  "
"
The pre-filters act on the printjob in the order they are listed (from top "
"to bottom).  This is done by acting as a filtering chain "
"where the output of one filter  acts as input to the next. By putting the "
"filters into the wrong order, you can make  the filtering chain fail. For "
"example: if your file is ASCII text, and you want the  output being processed "
"by the 'Multipage per Sheet' filter, the first filter must be  one that "
"processes ASCII into PostScript. 
  "
"
TDEPrint can utilize any external filtering program which you may "
"find useful  through this interface. 
  "
"
TDEPrint ships preconfigured with support for a selection of common filters. "
"These  filters however need to be  installed independently from TDEPrint. These "
"pre-filters work for all print subsystems supported by TDEPrint (such "
"as CUPS, LPRng and LPD), because they are not depending on these.
 ."
"
 Amongst the pre-configured filters shipping with TDEPrint are: 
  "
"
      "
"
  • the Enscript text filter  
    •   "
"
  • a Multiple Pages per Sheet filter  "
"
  • a PostScript to PDF converter.
    •   "
"
  • a Page Selection/Ordering filter.
    •   "
"
  • a Poster Printing filter.
    •   "
"
  • and some more..
    •   
  To insert a filter into this list, simply "
"click on the funnel icon (topmost on  the right icon column group) and "
"proceed. 
 "
"
Please click on the other elements of this dialog to learn more about the "
"TDEPrint  pre-filters.  
 "
msgstr ""

#: kpfilterpage.cpp:125
msgid "Filters"
msgstr "Филтрҳо"

#: kpfilterpage.cpp:141
msgid "Add filter"
msgstr "Иловаи филтр"

#: kpfilterpage.cpp:146
msgid "Remove filter"
msgstr "Нобуд кардани филтр"

#: kpfilterpage.cpp:151
msgid "Move filter up"
msgstr "Филтерро ба боло ҳаракат кунед"

#: kpfilterpage.cpp:156
msgid "Move filter down"
msgstr "Филтерро ба поён ҳаракат кунед"

#: kpfilterpage.cpp:161
msgid "Configure filter"
msgstr "Танзимоти филтр"

#: kpfilterpage.cpp:279
msgid "Internal error: unable to load filter."
msgstr "Хатои дарунӣ: филтерро пурбор карда натавонист."

#: kpfilterpage.cpp:394
msgid ""
"
The filter chain is wrong. The output format of at least one filter is not "
"supported by its follower. See Filters tab for more information.
"
msgstr ""
"
Занҷирҳои  филтрҳо нодурустанд. Андозаи барориши аққалан як файл аз тарафи "
"филтри оянда дастгирӣ карда намешавад. Муфассалтар дар гузориши Фильтрҳо"
". 
"

#: kpfilterpage.cpp:408
msgid "Input"
msgstr "Дохил кардан"

#~ msgid "%1 &Handbook"
#~ msgstr "%1 &Дастнома"

#~ msgid "%1 &Web Site"
#~ msgstr "%1 &Саҳифаи Вэб"

#~ msgid "Documentation"
#~ msgstr "Санадҳо"