# translation of kpovmodeler.po to zh_CN # Copyright (C) 2002,2003 Free Software Foundation, Inc. # Xiong Jiang , 2002,2003 # msgid "" msgstr "" "Project-Id-Version: kpovmodeler\n" "POT-Creation-Date: 2019-01-23 23:20+0100\n" "PO-Revision-Date: 2004-07-13 09:07+0800\n" "Last-Translator: Xiong Jiang \n" "Language-Team: zh_CN \n" "Language: \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 1.0\n" #: _translatorinfo:1 msgid "" "_: NAME OF TRANSLATORS\n" "Your names" msgstr "TDE 简体中文翻译组" #: _translatorinfo:2 msgid "" "_: EMAIL OF TRANSLATORS\n" "Your emails" msgstr "i18n-translation@lists.linux.net.cn" #: main.cpp:32 msgid "File to open" msgstr "要打开的文件" #: main.cpp:33 msgid "Disables OpenGL rendering" msgstr "禁用 OpenGL 渲染" #: main.cpp:34 msgid "Disables direct rendering" msgstr "禁用直接渲染" #: pmaddcommand.cpp:30 #, c-format msgid "Add New %1" msgstr "添加新的%1" #: pmaddcommand.cpp:43 msgid "Add Objects" msgstr "添加对象" #: pmbicubicpatch.cpp:166 msgid "bicubic patch" msgstr "双三次曲线补丁" #: pmbicubicpatch.cpp:530 msgid "Point (%1, %2)" msgstr "控制点 (%1, %2)" #: pmbicubicpatchedit.cpp:45 msgid "Normal (type 0)" msgstr "正常 (类型 0)" #: pmbicubicpatchedit.cpp:46 msgid "Preprocessed (type 1)" msgstr "预处理的 (类型 1)" #: pmbicubicpatchedit.cpp:48 pmcsgedit.cpp:45 pmheightfieldedit.cpp:45 #: pmlayoutsettings.cpp:110 pmlightedit.cpp:113 pmlistpatternedit.cpp:48 #: pmmediaedit.cpp:126 pmpatternedit.cpp:58 msgid "Type:" msgstr "类型：" #: pmbicubicpatchedit.cpp:55 msgid "Steps:" msgstr "步骤：" #: pmbicubicpatchedit.cpp:65 msgid "Flatness:" msgstr "平滑度：" #: pmbicubicpatchedit.cpp:69 msgid "Points:" msgstr "控制点：" #: pmbicubicpatchedit.cpp:75 pmtriangleedit.cpp:48 msgid "UV vectors" msgstr "UV 向量" #: pmblendmapmodifiers.cpp:111 msgid "blend map modifiers" msgstr "混合映射图修饰" #: pmblendmapmodifiersedit.cpp:53 msgid "Frequency:" msgstr "频率：" #: pmblendmapmodifiersedit.cpp:60 msgid "Phase:" msgstr "相位：" #: pmblendmapmodifiersedit.cpp:67 msgid "Wave form:" msgstr "波形：" #: pmblendmapmodifiersedit.cpp:69 msgid "Ramp" msgstr "锯齿波" #: pmblendmapmodifiersedit.cpp:70 pmpart.cpp:409 msgid "Triangle" msgstr "三角波" #: pmblendmapmodifiersedit.cpp:71 msgid "Sine" msgstr "正弦" #: pmblendmapmodifiersedit.cpp:72 msgid "Scallop" msgstr "扇形" #: pmblendmapmodifiersedit.cpp:73 msgid "Cubic" msgstr "三次曲线" #: pmblendmapmodifiersedit.cpp:74 msgid "Poly" msgstr "多边形" #: pmblendmapmodifiersedit.cpp:80 pmfinishedit.cpp:143 #: pmjuliafractaledit.cpp:80 pmpatternedit.cpp:163 msgid "Exponent:" msgstr "指数：" #: pmblob.cpp:61 msgid "blob" msgstr "团点" #: pmblobcylinder.cpp:75 msgid "blob cylinder" msgstr "团点球柱" #: pmblobcylinder.cpp:352 pmcone.cpp:330 pmcylinder.cpp:307 msgid "End 1" msgstr "端点 1" #: pmblobcylinder.cpp:354 pmcone.cpp:332 pmcylinder.cpp:309 msgid "End 2" msgstr "端点 2" #: pmblobcylinder.cpp:355 pmcylinder.cpp:310 pmdisc.cpp:319 msgid "Radius (1)" msgstr "半径 (1)" #: pmblobcylinder.cpp:356 pmcylinder.cpp:311 pmdisc.cpp:321 msgid "Radius (2)" msgstr "半径 (2)" #: pmblobcylinderedit.cpp:48 pmconeedit.cpp:49 pmcylinderedit.cpp:48 msgid "End 1:" msgstr "端点 1：" #: pmblobcylinderedit.cpp:50 pmconeedit.cpp:51 pmcylinderedit.cpp:50 msgid "End 2:" msgstr "端点 2：" #: pmblobcylinderedit.cpp:55 pmblobsphereedit.cpp:49 pmcylinderedit.cpp:54 #: pmdiscedit.cpp:58 pmglobalphotonsedit.cpp:137 pmglobalphotonsedit.cpp:150 #: pmisosurfaceedit.cpp:57 pmlightedit.cpp:52 pmsphereedit.cpp:49 #: pmwarpedit.cpp:85 msgid "Radius:" msgstr "半径：" #: pmblobcylinderedit.cpp:57 pmblobsphereedit.cpp:51 pmwarpedit.cpp:87 msgid "Strength:" msgstr "力度：" #: pmblobedit.cpp:39 pmisosurfaceedit.cpp:85 pmmediaedit.cpp:94 #: pmpreviewsettings.cpp:107 pmrendermodesdialog.cpp:332 msgid "Threshold:" msgstr "阈值：" #: pmblobedit.cpp:47 pmlatheedit.cpp:87 pmpolynomedit.cpp:54 pmprismedit.cpp:93 #: pmsoredit.cpp:71 pmtorusedit.cpp:44 msgid "Sturm" msgstr "" #: pmblobedit.cpp:49 pmheightfieldedit.cpp:72 pmmeshedit.cpp:39 msgid "Hierarchy" msgstr "层次" #: pmblobsphere.cpp:72 msgid "blob sphere" msgstr "团点球体" #: pmblobsphere.cpp:153 pmsphere.cpp:143 msgid "Radius (x)" msgstr "半径 (x)" #: pmblobsphere.cpp:156 pmsphere.cpp:146 msgid "Radius (y)" msgstr "半径 (y)" #: pmblobsphere.cpp:159 pmsphere.cpp:149 msgid "Radius (z)" msgstr "半径 (z)" #: pmblobsphereedit.cpp:44 pmdiscedit.cpp:51 pmisosurfaceedit.cpp:56 #: pmsphereedit.cpp:45 msgid "Center:" msgstr "中心：" #: pmboundedby.cpp:67 msgid "bounded by" msgstr "外包围" #: pmboundedbyedit.cpp:36 pmclippedbyedit.cpp:36 msgid "No child objects" msgstr "无子对象" #: pmboundedbyedit.cpp:38 msgid "(= clipped by)" msgstr "(= 剪切)" #: pmbox.cpp:62 msgid "box" msgstr "方框" #: pmbox.cpp:236 msgid "Corner 1" msgstr "角 1" #: pmbox.cpp:238 msgid "Corner 2" msgstr "角 2" #: pmboxedit.cpp:41 msgid "Corner 1:" msgstr "角 1：" #: pmboxedit.cpp:43 msgid "Corner 2:" msgstr "角 2：" #: pmbumpmap.cpp:266 msgid "bump map" msgstr "凸形映射图" #: pmbumpmapedit.cpp:55 pmimagemapedit.cpp:55 pmmaterialmapedit.cpp:55 msgid "File type:" msgstr "文件类型：" #: pmbumpmapedit.cpp:70 pmheightfieldedit.cpp:58 pmimagemapedit.cpp:70 #: pmmaterialmapedit.cpp:70 msgid "File name:" msgstr "文件名：" #: pmbumpmapedit.cpp:79 pmimagemapedit.cpp:92 pmmaterialmapedit.cpp:79 msgid "Once" msgstr "" #: pmbumpmapedit.cpp:83 pmimagemapedit.cpp:96 pmmaterialmapedit.cpp:83 msgid "Interpolate:" msgstr "内插：" #: pmbumpmapedit.cpp:85 pmimagemapedit.cpp:98 pmmaterialmapedit.cpp:85 #: pmpatternedit.cpp:131 msgid "None" msgstr "无" #: pmbumpmapedit.cpp:86 pmimagemapedit.cpp:99 pmmaterialmapedit.cpp:86 msgid "Bilinear" msgstr "双线性" #: pmbumpmapedit.cpp:87 pmimagemapedit.cpp:100 pmmaterialmapedit.cpp:87 msgid "Normalized" msgstr "归一化" #: pmbumpmapedit.cpp:93 pmimagemapedit.cpp:105 pmmaterialmapedit.cpp:93 msgid "Map type:" msgstr "映射类型：" #: pmbumpmapedit.cpp:95 pmimagemapedit.cpp:107 pmmaterialmapedit.cpp:95 #: pmpatternedit.cpp:77 pmwarpedit.cpp:54 msgid "Planar" msgstr "平面" #: pmbumpmapedit.cpp:96 pmimagemapedit.cpp:108 pmmaterialmapedit.cpp:96 #: pmpatternedit.cpp:82 pmwarpedit.cpp:52 msgid "Spherical" msgstr "球面" #: pmbumpmapedit.cpp:97 pmimagemapedit.cpp:109 pmmaterialmapedit.cpp:97 #: pmpatternedit.cpp:67 pmwarpedit.cpp:51 msgid "Cylindrical" msgstr "柱面" #: pmbumpmapedit.cpp:98 pmimagemapedit.cpp:110 pmmaterialmapedit.cpp:98 #: pmwarpedit.cpp:53 msgid "Toroidal" msgstr "环面" #: pmbumpmapedit.cpp:103 msgid "Use index" msgstr "使用索引" #: pmbumpmapedit.cpp:107 msgid "Bump size:" msgstr "凸起大小：" #: pmcamera.cpp:119 pmrendermanager.cpp:1545 pmrendermanager.cpp:1549 msgid "camera" msgstr "镜头" #: pmcamera.cpp:589 pmlight.cpp:1018 msgid "Location" msgstr "位置" #: pmcamera.cpp:591 msgid "Look at" msgstr "目标点" #: pmcameraedit.cpp:47 msgid "Perspective" msgstr "透视效果" #: pmcameraedit.cpp:48 msgid "Orthographic" msgstr "正交" #: pmcameraedit.cpp:49 msgid "Fish Eye" msgstr "鱼眼" #: pmcameraedit.cpp:50 msgid "Ultra Wide Angle" msgstr "超广角" #: pmcameraedit.cpp:51 msgid "Omnimax" msgstr "" #: pmcameraedit.cpp:52 msgid "Panoramic" msgstr "全景" #: pmcameraedit.cpp:53 pmpart.cpp:316 pmpreviewsettings.cpp:61 msgid "Cylinder" msgstr "圆柱" #: pmcameraedit.cpp:56 msgid "1: Vertical, Fixed Viewpoint" msgstr "1：竖直、固定取景" #: pmcameraedit.cpp:57 msgid "2: Horizontal, Fixed Viewpoint" msgstr "2：水平、固定取景" #: pmcameraedit.cpp:58 msgid "3: Vertical, Variable Viewpoint" msgstr "3：竖直、可变取景" #: pmcameraedit.cpp:59 msgid "4: Horizontal, Variable Viewpoint" msgstr "4：水平、可变取景" #: pmcameraedit.cpp:71 msgid "Camera type:" msgstr "镜头类型：" #: pmcameraedit.cpp:74 msgid "Cylinder type:" msgstr "圆柱类型：" #: pmcameraedit.cpp:79 pmlightedit.cpp:109 pmwarpedit.cpp:80 msgid "Location:" msgstr "位置：" #: pmcameraedit.cpp:82 msgid "Sky:" msgstr "天空：" #: pmcameraedit.cpp:85 pmpatternedit.cpp:213 pmrainbowedit.cpp:47 #: pmwarpedit.cpp:64 msgid "Direction:" msgstr "方向：" #: pmcameraedit.cpp:88 msgid "Right:" msgstr "右：" #: pmcameraedit.cpp:91 pmrainbowedit.cpp:76 msgid "Up:" msgstr "上：" #: pmcameraedit.cpp:94 msgid "Look at:" msgstr "目标点：" #: pmcameraedit.cpp:97 pmrainbowedit.cpp:54 msgid "Angle:" msgstr "角度：" #: pmcameraedit.cpp:101 msgid "Focal blur" msgstr "焦点模糊" #: pmcameraedit.cpp:120 msgid "Aperture:" msgstr "孔径：" #: pmcameraedit.cpp:124 msgid "Blur samples:" msgstr "模糊样本数：" #: pmcameraedit.cpp:128 msgid "Focal point:" msgstr "聚焦点：" #: pmcameraedit.cpp:132 pmmediaedit.cpp:75 msgid "Confidence:" msgstr "置信度：" #: pmcameraedit.cpp:136 pmmediaedit.cpp:79 msgid "Variance:" msgstr "方差：" #: pmcameraedit.cpp:141 pmgraphicalobjectedit.cpp:48 msgid "Export to renderer" msgstr "导出到渲染器" #: pmcameraedit.cpp:265 msgid "The sky vector may not be a null vector." msgstr "天空向量不能是空向量。" #: pmcameraedit.cpp:274 #, fuzzy msgid "The direction vector may not be a null vector." msgstr "方向向量不能是空向量" #: pmcameraedit.cpp:283 #, fuzzy msgid "The right vector may not be a null vector." msgstr "右向量不能是空向量" #: pmcameraedit.cpp:292 #, fuzzy msgid "The up vector may not be a null vector." msgstr "上向量不能是空向量" #: pmcameraedit.cpp:307 #, fuzzy msgid "Angle has to be smaller than 180 degrees for that camera type." msgstr "该镜头类型的角度必须小于 180 度。" #: pmclippedby.cpp:67 msgid "clipped by" msgstr "剪切" #: pmclippedbyedit.cpp:38 msgid "(= bounded by)" msgstr "(= 外包围)" #: pmcoloredit.cpp:51 msgid "red:" msgstr "红：" #: pmcoloredit.cpp:53 msgid "green:" msgstr "绿：" #: pmcoloredit.cpp:55 msgid "blue:" msgstr "兰：" #: pmcoloredit.cpp:60 msgid "filter" msgstr "滤镜" #: pmcoloredit.cpp:62 msgid "transmit" msgstr "传播" #: pmcolorsettings.cpp:38 msgid "Background:" msgstr "背景：" #: pmcolorsettings.cpp:45 msgid "Wire frame:" msgstr "线条框架：" #: pmcolorsettings.cpp:50 pmcolorsettings.cpp:60 msgid "Selected:" msgstr "选中的：" #: pmcolorsettings.cpp:55 msgid "Control points:" msgstr "控制点：" #: pmcolorsettings.cpp:65 msgid "Axes:" msgstr "轴：" #: pmcolorsettings.cpp:79 msgid "Field of view:" msgstr "可视区域：" #: pmcomment.cpp:95 msgid "comment" msgstr "注释" #: pmcone.cpp:80 msgid "cone" msgstr "锥体" #: pmcone.cpp:335 msgid "Radius 1 (1)" msgstr "半径 1 (1)" #: pmcone.cpp:336 msgid "Radius 1 (2)" msgstr "半径 1 (2)" #: pmcone.cpp:337 msgid "Radius 2 (1)" msgstr "半径 2 (1)" #: pmcone.cpp:338 msgid "Radius 2 (2)" msgstr "半径 2 (2)" #: pmconeedit.cpp:46 pmcylinderedit.cpp:45 pmisosurfaceedit.cpp:70 #: pmprismedit.cpp:91 pmsoredit.cpp:68 msgid "" "_: type of the object\n" "Open" msgstr "" #: pmconeedit.cpp:56 msgid "Radius 1:" msgstr "半径 1：" #: pmconeedit.cpp:58 msgid "Radius 2:" msgstr "半径 2：" #: pmcsg.cpp:62 msgid "union" msgstr "联合" #: pmcsg.cpp:65 msgid "intersection" msgstr "相交" #: pmcsg.cpp:68 msgid "difference" msgstr "差异" #: pmcsg.cpp:71 msgid "merge" msgstr "合并" #: pmcsgedit.cpp:39 pmpart.cpp:373 msgid "Union" msgstr "联合" #: pmcsgedit.cpp:40 pmpart.cpp:376 msgid "Intersection" msgstr "相交" #: pmcsgedit.cpp:41 pmpart.cpp:379 msgid "Difference" msgstr "差异" #: pmcsgedit.cpp:42 pmpart.cpp:382 msgid "Merge" msgstr "合并" #: pmcylinder.cpp:79 msgid "cylinder" msgstr "圆柱" #: pmdatachangecommand.cpp:31 #, c-format msgid "Change %1" msgstr "修改 %1" #: pmdeclare.cpp:79 msgid "declaration" msgstr "声明" #: pmdeclareedit.cpp:50 msgid "Identifier:" msgstr "标识符：" #: pmdeclareedit.cpp:61 msgid "Linked objects:" msgstr "链接的对象：" #: pmdeclareedit.cpp:71 pmlinkedit.cpp:69 #, fuzzy msgid "Select..." msgstr "选择" #: pmdeclareedit.cpp:123 msgid "Please enter an identifier!" msgstr "请输入一个标识符！" #: pmdeclareedit.cpp:154 msgid "" "An identifier may consist of letters, digits and the underscore character " "('_').\n" "The first character must be a letter or the underscore character!" msgstr "" "标识符可以包含字母、数字和下划线(‘_’)。\n" "第一个字符必须是字母或者下划线！" #: pmdeclareedit.cpp:167 msgid "You can't use a povray reserved word as an identifier!" msgstr "您不能用 povray 保留字作为标识符！" #: pmdeclareedit.cpp:174 msgid "You can't use a povray directive as an identifier!" msgstr "您不能用 povray 指令作为标识符！" #: pmdeclareedit.cpp:183 msgid "Please enter a unique identifier!" msgstr "请输入一个唯一的标识符！" #: pmdeletecommand.cpp:30 #, c-format msgid "Delete %1" msgstr "删除 %1" #: pmdeletecommand.cpp:49 msgid "Delete Objects" msgstr "删除对象" #: pmdeletecommand.cpp:257 msgid "The declare \"%1\" can't be removed because of some remaining links." msgstr "因为有剩余的链接，声明“%1”不能被删除。" #: pmdensity.cpp:68 msgid "density" msgstr "密度" #: pmdetailobjectedit.cpp:37 #, fuzzy msgid "Global detail" msgstr "全局设置" #: pmdetailobjectedit.cpp:38 #, fuzzy msgid "Detail level:" msgstr "水平面：" #: pmdetailobjectedit.cpp:40 pmpart.cpp:275 #, fuzzy msgid "Very Low" msgstr "下方" #: pmdetailobjectedit.cpp:41 pmpart.cpp:276 msgid "Low" msgstr "" #: pmdetailobjectedit.cpp:42 pmpart.cpp:277 #, fuzzy msgid "Medium" msgstr "介质" #: pmdetailobjectedit.cpp:43 pmpart.cpp:278 #, fuzzy msgid "High" msgstr "高度：" #: pmdetailobjectedit.cpp:44 pmpart.cpp:279 #, fuzzy msgid "Very High" msgstr "视图高度：" #: pmdialogeditbase.cpp:173 msgid "Texture preview:" msgstr "纹理预览：" #: pmdialogeditbase.cpp:183 msgid "local" msgstr "本地" #: pmdialogeditbase.cpp:190 msgid "&Preview" msgstr "预览(&P)" #: pmdialogeditbase.cpp:194 pmpovrayoutputwidget.cpp:51 pmpovraywidget.cpp:77 msgid "Povray Output" msgstr "Povray 输出" #: pmdialogeditbase.cpp:540 msgid "" "Povray exited abnormally with exit code %1.\n" "See the povray output for details." msgstr "" "Povray 异常退出，错误代码为 %1。\n" "详情请见 povray 输出。" #: pmdialogeditbase.cpp:547 pmpovraywidget.cpp:342 #, fuzzy msgid "" "There were errors while rendering.\n" "See the povray output for details." msgstr "" "Povray 异常退出，错误代码为 %1。\n" "详情请见 povray 输出。" #: pmdialogview.cpp:235 msgid "" "This object was modified.\n" "\n" "Save changes?" msgstr "" "此对象已被修改。\n" "\n" "要保存改变吗？" #: pmdialogview.cpp:236 msgid "Unsaved Changes" msgstr "未保存的改变" #: pmdialogview.cpp:433 pmdialogview.cpp:438 msgid "Object Properties" msgstr "对象属性" #: pmdisc.cpp:78 msgid "disc" msgstr "圆盘" #: pmdisc.cpp:323 msgid "Hole Radius (1)" msgstr "孔半径 (1)" #: pmdisc.cpp:325 msgid "Hole Radius (2)" msgstr "孔半径 (2)" #: pmdisc.cpp:328 pmpart.cpp:425 pmplane.cpp:219 pmradiosityedit.cpp:108 msgid "Normal" msgstr "法向量" #: pmdiscedit.cpp:53 pmplaneedit.cpp:47 msgid "Normal:" msgstr "法向量：" #: pmdiscedit.cpp:60 msgid "Hole radius:" msgstr "孔半径：" #: pmdiscedit.cpp:64 pmplaneedit.cpp:55 msgid "Normalize" msgstr "归一化" #: pmdiscedit.cpp:126 pmplaneedit.cpp:112 msgid "The normal vector may not be a null vector." msgstr "法向量不能是空向量。" #: pmdiscedit.cpp:138 msgid "The radius may not be smaller than the hole radius." msgstr "半径不能小于孔半径。" #: pmerrordialog.cpp:33 msgid "Messages" msgstr "消息" #: pmerrordialog.cpp:79 msgid "There were warnings and errors:" msgstr "警告和错误：" #: pmerrordialog.cpp:81 msgid "There were warnings:" msgstr "警告：" #: pmerrordialog.cpp:84 msgid "There were errors:" msgstr "错误：" #: pmerrordialog.cpp:87 msgid "Proceed" msgstr "继续" #: pmerrordialog.cpp:88 msgid "" "When clicking Proceed, the program\n" "will try to proceed with the current action." msgstr "" "如果单击 继续，\n" "程序将试图继续进行当前的动作。" #: pmerrordialog.cpp:92 msgid "" "When clicking Cancel, the program\n" "will cancel the current action." msgstr "" "如果单击取消，程序\n" "将取消当前的动作。" #: pmerrordialog.cpp:98 msgid "Still try to proceed?" msgstr "" #: pmfactory.cpp:36 msgid "Modeler for POV-Ray Scenes" msgstr "POV-Ray 场景建模工具" #: pmfactory.cpp:86 msgid "KPovModeler" msgstr "KPovModeler" #: kpovmodelerui.rc:87 kpovmodelerui.rc:251 pmfactory.cpp:91 #, no-c-format msgid "Textures" msgstr "纹理" #: pmfactory.cpp:93 #, fuzzy msgid "POV-Ray 3.5 objects" msgstr "POV-Ray 文件(*.pov)" #: pmfactory.cpp:95 pmfactory.cpp:97 msgid "Some graphical objects" msgstr "一些图形对象" #: pmfinish.cpp:219 msgid "finish" msgstr "抛光" #: pmfinishedit.cpp:46 msgid "Ambient color" msgstr "使用环境色" #: pmfinishedit.cpp:47 pmfogedit.cpp:64 pmgridsettings.cpp:47 #: pmlightedit.cpp:111 pmmediaedit.cpp:106 pmmediaedit.cpp:116 #: pmmediaedit.cpp:136 pmquickcoloredit.cpp:41 pmsolidcoloredit.cpp:40 msgid "Color:" msgstr "颜色：" #: pmfinishedit.cpp:56 msgid "Diffuse:" msgstr "漫反射：" #: pmfinishedit.cpp:60 msgid "Brilliance:" msgstr "辉度：" #: pmfinishedit.cpp:64 msgid "Crand:" msgstr "" #: pmfinishedit.cpp:69 msgid "Conserve energy for reflection" msgstr "" #: pmfinishedit.cpp:75 msgid "Phong:" msgstr "" #: pmfinishedit.cpp:77 msgid "Phong size:" msgstr "" #: pmfinishedit.cpp:87 msgid "Specular:" msgstr "镜面：" #: pmfinishedit.cpp:91 msgid "Roughness:" msgstr "粗糙度：" #: pmfinishedit.cpp:95 pmfinishedit.cpp:148 msgid "Metallic:" msgstr "金属感：" #: pmfinishedit.cpp:103 msgid "Iridiscence" msgstr "彩虹色" #: pmfinishedit.cpp:105 pmrendermodesdialog.cpp:344 msgid "Amount:" msgstr "数量：" #: pmfinishedit.cpp:109 pmtextedit.cpp:56 msgid "Thickness:" msgstr "厚度：" #: pmfinishedit.cpp:114 pmpatternedit.cpp:93 pmwarpedit.cpp:106 msgid "Turbulence:" msgstr "扰动：" #: pmfinishedit.cpp:117 pmphotonsedit.cpp:51 msgid "Reflection" msgstr "反射" #: pmfinishedit.cpp:124 pmglobalphotonsedit.cpp:129 msgid "Minimum:" msgstr "最小：" #: pmfinishedit.cpp:129 msgid "Maximum:" msgstr "最大：" #: pmfinishedit.cpp:135 msgid "Fresnel reflectivity" msgstr "" #: pmfinishedit.cpp:138 pmlightedit.cpp:56 pmwarpedit.cpp:89 msgid "Falloff:" msgstr "张开：" #: pmfog.cpp:130 msgid "fog" msgstr "雾" #: pmfogedit.cpp:48 msgid "Fog type:" msgstr "雾类型：" #: pmfogedit.cpp:50 msgid "Constant" msgstr "恒定" #: pmfogedit.cpp:51 msgid "Ground" msgstr "地面" #: pmfogedit.cpp:57 pmgridsettings.cpp:53 pmplaneedit.cpp:51 #: pmrainbowedit.cpp:64 msgid "Distance:" msgstr "距离：" #: pmfogedit.cpp:71 pmpatternedit.cpp:264 pmwarpedit.cpp:50 msgid "Turbulence" msgstr "扰动" #: pmfogedit.cpp:77 msgid "Value: " msgstr "值：" #: pmfogedit.cpp:84 pmpatternedit.cpp:274 pmwarpedit.cpp:125 msgid "Octaves:" msgstr "" #: pmfogedit.cpp:88 pmpatternedit.cpp:277 pmwarpedit.cpp:129 msgid "Omega:" msgstr "" #: pmfogedit.cpp:92 pmpatternedit.cpp:280 pmwarpedit.cpp:133 msgid "Lambda:" msgstr "" #: pmfogedit.cpp:96 pmlistpatternedit.cpp:59 pmpatternedit.cpp:250 #: pmpreviewsettings.cpp:103 pmrendermodesdialog.cpp:336 msgid "Depth:" msgstr "深度：" #: pmfogedit.cpp:105 msgid "Offset: " msgstr "偏移：" #: pmfogedit.cpp:107 msgid "Altitude: " msgstr "高度：" #: pmfogedit.cpp:116 msgid "Up: " msgstr "上：" #: pmglobalphotons.cpp:169 #, fuzzy msgid "global photons" msgstr "全局设置" #: pmglobalphotonsedit.cpp:47 msgid "Photon numbers" msgstr "" #: pmglobalphotonsedit.cpp:50 #, fuzzy msgid "Count" msgstr "计数：" #: pmglobalphotonsedit.cpp:62 pmglobalphotonsedit.cpp:135 #, fuzzy msgid "Gather" msgstr "旋转体" #: pmglobalphotonsedit.cpp:64 pmmediaedit.cpp:63 #, fuzzy msgid "Min:" msgstr "最小：" #: pmglobalphotonsedit.cpp:69 pmmediaedit.cpp:67 #, fuzzy msgid "Max:" msgstr "最大：" #: pmglobalphotonsedit.cpp:75 pmglobalphotonsedit.cpp:148 pmpart.cpp:301 #: pmradiosityedit.cpp:93 msgid "Media" msgstr "介质" #: pmglobalphotonsedit.cpp:77 #, fuzzy msgid "Max stop:" msgstr "映射类型：" #: pmglobalphotonsedit.cpp:82 pmpatternedit.cpp:181 pmpatternedit.cpp:194 #, fuzzy msgid "Factor:" msgstr "函数类型：" #: pmglobalphotonsedit.cpp:89 pmrainbowedit.cpp:69 msgid "Jitter:" msgstr "抖动：" #: pmglobalphotonsedit.cpp:97 #, fuzzy msgid "Max trace level:" msgstr "最大跟踪级别：" #: pmglobalphotonsedit.cpp:100 pmglobalphotonsedit.cpp:108 #, fuzzy msgid "Use global" msgstr "全局设置" #: pmglobalphotonsedit.cpp:105 pmglobalsettingsedit.cpp:46 #: pmradiosityedit.cpp:48 msgid "Adc bailout:" msgstr "" #: pmglobalphotonsedit.cpp:114 msgid "Autostop:" msgstr "" #: pmglobalphotonsedit.cpp:122 msgid "Expand" msgstr "" #: pmglobalphotonsedit.cpp:124 #, fuzzy msgid "Increase:" msgstr "间隔：" #: pmglobalphotonsedit.cpp:142 pmglobalphotonsedit.cpp:155 msgid "Multiplier:" msgstr "" #: pmglobalsettings.cpp:173 msgid "global settings" msgstr "全局设置" #: pmglobalsettingsedit.cpp:53 msgid "Ambient light:" msgstr "环境光" #: pmglobalsettingsedit.cpp:60 msgid "Assumed gamma:" msgstr "" #: pmglobalsettingsedit.cpp:66 msgid "Hf gray 16" msgstr "" #: pmglobalsettingsedit.cpp:70 msgid "Iridiscence wave length:" msgstr "彩虹色波长：" #: pmglobalsettingsedit.cpp:78 msgid "Maximum intersections:" msgstr "最大相交次数" #: pmglobalsettingsedit.cpp:82 msgid "Maximum trace level:" msgstr "最大跟踪级别：" #: pmglobalsettingsedit.cpp:86 msgid "Number of waves:" msgstr "波数" #: pmglobalsettingsedit.cpp:90 pmpatternedit.cpp:255 msgid "Noise generator:" msgstr "" #: pmglobalsettingsedit.cpp:92 pmpatternedit.cpp:258 msgid "Original" msgstr "" #: pmglobalsettingsedit.cpp:93 pmpatternedit.cpp:259 msgid "Range Corrected" msgstr "" #: pmglobalsettingsedit.cpp:94 pmpatternedit.cpp:260 #, fuzzy msgid "Perlin" msgstr "图案" #: pmglobalsettingsedit.cpp:99 msgid "Radiosity (Povray 3.1)" msgstr "" #: pmglobalsettingsedit.cpp:105 pmradiosityedit.cpp:57 msgid "Brightness:" msgstr "亮度：" #: pmglobalsettingsedit.cpp:109 pmradiosityedit.cpp:63 msgid "Count:" msgstr "计数：" #: pmglobalsettingsedit.cpp:113 msgid "Maximum distance:" msgstr "最大距离：" #: pmglobalsettingsedit.cpp:117 pmradiosityedit.cpp:69 msgid "Error boundary:" msgstr "错误边界：" #: pmglobalsettingsedit.cpp:121 pmradiosityedit.cpp:75 msgid "Gray threshold:" msgstr "灰度阈值：" #: pmglobalsettingsedit.cpp:125 pmradiosityedit.cpp:81 msgid "Low error factor:" msgstr "低错误因子：" #: pmglobalsettingsedit.cpp:129 pmradiosityedit.cpp:96 msgid "Minimum reuse:" msgstr "" #: pmglobalsettingsedit.cpp:133 pmradiosityedit.cpp:102 #, fuzzy msgid "Nearest count:" msgstr "最接近的计数" #: pmglobalsettingsedit.cpp:137 pmradiosityedit.cpp:123 msgid "Recursion limit:" msgstr "递归限度：" #: pmglobalsettingsedit.cpp:268 msgid "Maximum intersections must be a positive value." msgstr "最大相交次数必须是正数。" #: pmglobalsettingsedit.cpp:275 msgid "Maximum trace level must be a positive value." msgstr "最大跟踪级别必须是正数。" #: pmglobalsettingsedit.cpp:282 msgid "Number of waves must be a positive value." msgstr "波数必须是正数值。" #: pmglobalsettingsedit.cpp:289 msgid "Nearest count must be between 1 and 10." msgstr "最接近的计数必须在 1 和 10 之间。" #: pmglobalsettingsedit.cpp:297 msgid "Recursion limit must be 1 or 2." msgstr "递归限度必须是 1 或 2。" #: pmglview.cpp:369 msgid "No OpenGL support" msgstr "没有 OpenGL 支持" #: pmglview.cpp:1517 pmglview.cpp:1790 msgid "Front" msgstr "前面" #: pmglview.cpp:1523 pmglview.cpp:1565 pmglview.cpp:1792 pmpart.cpp:414 msgid "Camera" msgstr "镜头" #: pmglview.cpp:1540 msgid "Left View" msgstr "左视图" #: pmglview.cpp:1541 msgid "Right View" msgstr "右视图" #: pmglview.cpp:1542 msgid "Top View" msgstr "顶视图" #: pmglview.cpp:1543 msgid "Bottom View" msgstr "底视图" #: pmglview.cpp:1544 msgid "Front View" msgstr "前视图" #: pmglview.cpp:1545 msgid "Back View" msgstr "后视图" #: pmglview.cpp:1551 msgid "No Cameras" msgstr "无镜头" #: pmglview.cpp:1559 pmmovecommand.cpp:448 pmobjectselect.cpp:75 #: pmrendermanager.cpp:1543 msgid "(unnamed)" msgstr "(未命名)" #: pmglview.cpp:1569 pmglview.cpp:1675 msgid "Snap to Grid" msgstr "对齐网格" #: pmglview.cpp:1594 msgid "No Control Points" msgstr "无控制点" #: pmglview.cpp:1603 msgid "Control Points" msgstr "控制点数" #: pmglview.cpp:1741 msgid "Unknown GL view type." msgstr "未知的 GL 视图类型。" #: pmglview.cpp:1749 msgid "3D View" msgstr "3D 视图" #: pmglview.cpp:1757 #, fuzzy msgid "3D View (%1)" msgstr "3D 视图" #: pmglview.cpp:1782 msgid "3D view type:" msgstr "3D 视图类型" #: pmgraphicalobjectedit.cpp:40 msgid "No shadow" msgstr "无阴影" #: pmgraphicalobjectedit.cpp:42 #, fuzzy msgid "No image" msgstr "图像映射图" #: pmgraphicalobjectedit.cpp:44 #, fuzzy msgid "No reflection" msgstr "反射" #: pmgraphicalobjectedit.cpp:46 msgid "Double illuminate" msgstr "" #: pmgraphicalobjectedit.cpp:52 msgid "Visibility level: " msgstr "可见层次：" #: pmgraphicalobjectedit.cpp:58 msgid "Relative" msgstr "相对的" #: pmgridsettings.cpp:41 msgid "Displayed Grid" msgstr "显示区域网格" #: pmgridsettings.cpp:59 msgid "Control Point Grid" msgstr "控制点网格" #: pmgridsettings.cpp:66 msgid "2D/3D movement:" msgstr "2D/3D 运动：" #: pmgridsettings.cpp:71 msgid "Scale:" msgstr "缩放：" #: pmgridsettings.cpp:76 msgid "Rotation:" msgstr "旋转：" #: pmheightfield.cpp:87 msgid "height field" msgstr "高度场" #: pmheightfieldedit.cpp:66 msgid "Water level:" msgstr "水平面：" #: pmheightfieldedit.cpp:75 pmtriangleedit.cpp:43 msgid "Smooth" msgstr "平滑" #: pmimagemap.cpp:349 msgid "imagemap" msgstr "图像映射图" #: pmimagemapedit.cpp:79 msgid "Filter all" msgstr "全部过滤" #: pmimagemapedit.cpp:86 msgid "Transmit all" msgstr "全部变换" #: pmimagemapedit.cpp:128 msgid "Indexed filters" msgstr "索引过滤器" #: pmimagemapedit.cpp:131 msgid "Indexed transmits" msgstr "索引变换" #: pmimagemapedit.cpp:272 pmimagemapedit.cpp:292 msgid "Add new filter" msgstr "添加新过滤器" #: pmimagemapedit.cpp:301 msgid "Remove filter" msgstr "删除过滤器" #: pmimagemapedit.cpp:328 pmimagemapedit.cpp:348 msgid "Add new transmit" msgstr "添加新转换器" #: pmimagemapedit.cpp:357 msgid "Remove transmit" msgstr "删除转换器" #: pminserterrordialog.cpp:29 msgid "Insert Errors" msgstr "插入错误" #: pminserterrordialog.cpp:30 msgid "Details" msgstr "详细" #: pminserterrordialog.cpp:33 msgid "%1 of %2 objects couldn't be inserted." msgstr "%2 对象的 %1 目标不能被插入。" #: pminserterrordialog.cpp:36 msgid "Objects not inserted:" msgstr "未插入的对象：" #: pminsertpopup.cpp:33 msgid "Insert Objects As" msgstr "对象插入为" #: pminsertpopup.cpp:36 msgid "First Children" msgstr "第一子对象" #: pminsertpopup.cpp:38 pminsertpopup.cpp:46 pminsertpopup.cpp:54 msgid "some" msgstr "某些" #: pminsertpopup.cpp:44 msgid "Last Children" msgstr "最后子对象" #: pminsertpopup.cpp:52 msgid "Siblings" msgstr "兄弟对象" #: pminsertpopup.cpp:61 #, fuzzy msgid "Insert Object As" msgstr "对象插入为" #: pminsertpopup.cpp:64 msgid "First Child" msgstr "第一子对象" #: pminsertpopup.cpp:67 msgid "Last Child" msgstr "最后子对象" #: pminsertpopup.cpp:70 msgid "Sibling" msgstr "兄弟对象" #: pminterior.cpp:125 msgid "interior" msgstr "内部" #: pminterioredit.cpp:42 msgid "Refraction:" msgstr "折射：" #: pminterioredit.cpp:46 msgid "Caustics:" msgstr "散焦：" #: pminterioredit.cpp:50 #, fuzzy msgid "Dispersion:" msgstr "版本：" #: pminterioredit.cpp:55 #, fuzzy msgid "Dispersion samples:" msgstr "版本：" #: pminterioredit.cpp:60 pmlightedit.cpp:96 msgid "Fade distance:" msgstr "消逝距离：" #: pminterioredit.cpp:64 pmlightedit.cpp:100 msgid "Fade power:" msgstr "消逝能力：" #: pminteriortexture.cpp:68 #, fuzzy msgid "interior texture" msgstr "内部" #: pmisosurface.cpp:101 msgid "isosurface" msgstr "" #: pmisosurfaceedit.cpp:47 pmpart.cpp:310 pmpreviewsettings.cpp:63 msgid "Box" msgstr "方块" #: pmisosurfaceedit.cpp:48 pmpart.cpp:313 pmpreviewsettings.cpp:59 msgid "Sphere" msgstr "球体" #: pmisosurfaceedit.cpp:54 #, fuzzy msgid "Corner1:" msgstr "角 1：" #: pmisosurfaceedit.cpp:55 #, fuzzy msgid "Corner2:" msgstr "角 2：" #: pmisosurfaceedit.cpp:64 msgid "Adapt maximum gradient" msgstr "" #: pmisosurfaceedit.cpp:69 #, fuzzy msgid "All intersections" msgstr "相交" #: pmisosurfaceedit.cpp:73 #, fuzzy msgid "Function:" msgstr "函数类型：" #: pmisosurfaceedit.cpp:75 #, fuzzy msgid "Container:" msgstr "中心：" #: pmisosurfaceedit.cpp:87 msgid "Accuracy:" msgstr "" #: pmisosurfaceedit.cpp:91 #, fuzzy msgid "Maximum gradient:" msgstr "最大迭代：" #: pmisosurfaceedit.cpp:96 #, fuzzy msgid "Values:" msgstr "值：" #: pmisosurfaceedit.cpp:104 #, fuzzy msgid "Maximum traces:" msgstr "最大距离：" #: pmjuliafractal.cpp:86 msgid "julia fractal" msgstr "Julia 分形" #: pmjuliafractaledit.cpp:43 msgid "Julia parameter:" msgstr "Julia 参数：" #: pmjuliafractaledit.cpp:48 msgid "Algebra type:" msgstr "代数类型：" #: pmjuliafractaledit.cpp:50 msgid "Quaternion" msgstr "四元数" #: pmjuliafractaledit.cpp:51 msgid "Hypercomplex" msgstr "超复数" #: pmjuliafractaledit.cpp:56 msgid "Function type:" msgstr "函数类型：" #: pmjuliafractaledit.cpp:88 pmpatternedit.cpp:159 msgid "Maximum iterations:" msgstr "最大迭代：" #: pmjuliafractaledit.cpp:92 msgid "Precision:" msgstr "精度：" #: pmjuliafractaledit.cpp:98 msgid "Slice normal:" msgstr "切片法向：" #: pmjuliafractaledit.cpp:103 msgid "Slice distance:" msgstr "切片距离：" #: pmjuliafractaledit.cpp:331 #, fuzzy msgid "The slice normal vector may not be a null vector." msgstr "切片法向向量不能为空向量" #: pmjuliafractaledit.cpp:337 #, fuzzy msgid "The 'k' component of the slice normal vector may not be zero." msgstr "切片法向向量‘k’分量不能为零。" #: pmjuliafractaledit.cpp:349 #, fuzzy msgid "" "Only the functions 'sqr' and 'cube' are defined in the quaternion algebra." msgstr "在四元代数里只有‘sqr’和‘cube’函数有定义" #: pmlathe.cpp:144 msgid "lathe" msgstr "旋转体" #: pmlathe.cpp:552 pmlathe.cpp:555 pmlathe.cpp:576 pmlathe.cpp:579 #: pmsor.cpp:424 msgid "Point %1 (xy)" msgstr "点 %1 (xy)" #: pmlathe.cpp:670 pmprism.cpp:773 pmsor.cpp:533 #, fuzzy msgid "Add Point" msgstr "控制点：" #: pmlathe.cpp:674 pmprism.cpp:777 pmsor.cpp:537 #, fuzzy msgid "Remove Point" msgstr "删除过滤器" #: pmlatheedit.cpp:47 pmprismedit.cpp:53 pmspheresweepedit.cpp:48 msgid "Spline type:" msgstr "样条类型：" #: pmlatheedit.cpp:49 pmprismedit.cpp:55 pmspheresweepedit.cpp:50 msgid "Linear Spline" msgstr "线性样条" #: pmlatheedit.cpp:50 pmprismedit.cpp:56 msgid "Quadratic Spline" msgstr "二次曲线" #: pmlatheedit.cpp:51 pmprismedit.cpp:57 pmspheresweepedit.cpp:52 msgid "Cubic Spline" msgstr "三次曲线" #: pmlatheedit.cpp:52 pmprismedit.cpp:58 msgid "Bezier Spline" msgstr "贝塞尔曲线" #: pmlatheedit.cpp:62 pmsoredit.cpp:43 msgid "Spline points:" msgstr "样条控制点：" #: pmlatheedit.cpp:193 pmspheresweepedit.cpp:213 msgid "Linear splines need at least 2 points." msgstr "线性样条至少需要 2 个点。" #: pmlatheedit.cpp:201 msgid "Quadratic splines need at least 3 points." msgstr "二次曲线样条至少需要 3 个点。" #: pmlatheedit.cpp:209 pmspheresweepedit.cpp:229 msgid "Cubic splines need at least 4 points." msgstr "三次曲线样条至少需要 4 个点。" #: pmlatheedit.cpp:217 pmspheresweepedit.cpp:237 msgid "Bezier splines need 4 points for each segment." msgstr "贝塞尔曲线样条每段需要 4 个点。" #: pmlayoutsettings.cpp:49 msgid "Default view layout:" msgstr "默认视图布局：" #: pmlayoutsettings.cpp:54 msgid "Available View Layouts" msgstr "可用视图布局" #: pmlayoutsettings.cpp:72 pmsettingsdialog.cpp:112 msgid "View Layout" msgstr "视图布局" #: pmlayoutsettings.cpp:77 pmnamedobjectedit.cpp:39 msgid "Name:" msgstr "名称：" #: pmlayoutsettings.cpp:86 msgid "Type" msgstr "类型" #: pmlayoutsettings.cpp:87 msgid "Position" msgstr "位置" #: pmlayoutsettings.cpp:111 msgid "Dock position:" msgstr "停靠位置：" #: pmlayoutsettings.cpp:112 msgid "Column width:" msgstr "列宽：" #: pmlayoutsettings.cpp:114 msgid "View height:" msgstr "视图高度：" #: pmlayoutsettings.cpp:129 pmviewlayoutmanager.cpp:217 msgid "New Column" msgstr "新列" #: pmlayoutsettings.cpp:130 pmviewlayoutmanager.cpp:219 msgid "Below" msgstr "下方" #: pmlayoutsettings.cpp:131 pmviewlayoutmanager.cpp:221 msgid "Tabbed" msgstr "新标签" #: pmlayoutsettings.cpp:132 pmviewlayoutmanager.cpp:223 msgid "Floating" msgstr "浮动" #: pmlayoutsettings.cpp:147 pmrainbowedit.cpp:59 pmrendermodesdialog.cpp:274 msgid "Width:" msgstr "宽度：" #: pmlayoutsettings.cpp:148 pmrendermodesdialog.cpp:278 pmslopeedit.cpp:45 msgid "Height:" msgstr "高度：" #: pmlayoutsettings.cpp:149 msgid "Position x:" msgstr "位置 x：" #: pmlayoutsettings.cpp:213 msgid "View layouts may not have empty names." msgstr "视图布局名称不能为空。" #: pmlayoutsettings.cpp:223 #, fuzzy msgid "" "The docking position of the first view layout entry has to be 'New Column'." msgstr "第一个视图布局条目的停靠位置必须为‘新列’" #: pmlayoutsettings.cpp:263 pmlayoutsettings.cpp:267 msgid "Unnamed" msgstr "未命名" #: pmlibrarybrowser.cpp:61 pmlibrarybrowser.cpp:301 #, fuzzy msgid "Library View" msgstr "对象库" #: pmlibrarybrowser.cpp:67 msgid "Library Objects" msgstr "库对象" #: pmlibrarybrowser.cpp:81 msgid "Library: " msgstr "对象库：" #: pmlibrarybrowser.cpp:235 pmlibrarybrowser.cpp:256 pmlibrarybrowser.cpp:284 msgid "This library is read only." msgstr "" #: pmlibrarybrowser.cpp:238 #, fuzzy msgid "The current library does not contain that item." msgstr "库路径列表中已经包括此路径。" #: pmlibrarybrowser.cpp:241 #, fuzzy msgid "Could not remove item." msgstr "不能保存文件。" #: pmlibrarybrowser.cpp:259 #, fuzzy msgid "Could not create a new object." msgstr "不能保存文件。" #: pmlibrarybrowser.cpp:268 #, fuzzy msgid "Create Sub-Library" msgstr "对象库(&L)" #: pmlibrarybrowser.cpp:269 #, fuzzy msgid "Enter the sub-library name: " msgstr "输入视图布局名称：" #: pmlibrarybrowser.cpp:270 pmlibraryhandle.cpp:39 pmlibraryhandle.cpp:40 #: pmlibraryhandle.cpp:49 pmlibraryhandle.cpp:50 pmlibraryhandle.cpp:110 #: pmlibraryhandle.cpp:111 pmlibraryhandle.cpp:138 pmlibraryhandle.cpp:143 #: pmshell.cpp:212 pmunknownview.cpp:36 pmviewlayoutmanager.cpp:209 #, fuzzy msgid "Unknown" msgstr "未知" #: pmlibrarybrowser.cpp:281 #, fuzzy msgid "That library already exists." msgstr "库路径列表中已经包括此路径。" #: pmlibrarybrowser.cpp:287 #, fuzzy msgid "Could not create a new sub library." msgstr "不能保存文件。" #: pmlibraryentrypreview.cpp:60 pmlibraryhandleedit.cpp:51 msgid "Name: " msgstr "名称：" #: pmlibraryentrypreview.cpp:67 pmrendermodesdialog.cpp:255 msgid "Description:" msgstr "描述：" #: pmlibraryentrypreview.cpp:76 #, fuzzy msgid "Keywords:" msgstr "关键字" #: pmlibraryentrypreview.cpp:85 #, fuzzy msgid "Contents:" msgstr "指数：" #: pmlibraryentrypreview.cpp:93 msgid "Change Preview Image" msgstr "" #: pmlibraryentrypreview.cpp:183 #, fuzzy msgid "Object Load" msgstr "对象链" #: pmlibraryentrypreview.cpp:274 msgid "" "The object has been modified and not saved.\n" "Do you wish to save?" msgstr "" #: pmlibraryhandleedit.cpp:40 #, fuzzy msgid "Create Library" msgstr "对象库(&L)" #: pmlibraryhandleedit.cpp:56 msgid "Author: " msgstr "" #: pmlibraryhandleedit.cpp:61 msgid "Description: " msgstr "描述：" #: pmlibraryhandleedit.cpp:68 msgid "Allow changes to the library?" msgstr "" #: pmlibraryiconview.cpp:280 msgid "Error moving \"%1\" to \"%2\"" msgstr "" #: pmlibraryobjectsearch.cpp:48 msgid "Search for:" msgstr "查找：" #: pmlibraryobjectsearch.cpp:54 #, fuzzy msgid "&Search" msgstr "查找" #: pmlibraryobjectsearch.cpp:65 pmobjectlibrarysettings.cpp:65 msgid "Path" msgstr "路径" #: pmlight.cpp:127 msgid "light" msgstr "光源" #: pmlight.cpp:1020 msgid "Point at" msgstr "指向" #: pmlightedit.cpp:45 msgid "Point Light" msgstr "点光源" #: pmlightedit.cpp:46 msgid "Spot Light" msgstr "会聚光源" #: pmlightedit.cpp:47 msgid "Cylindrical Light" msgstr "柱形光源" #: pmlightedit.cpp:48 msgid "Shadowless Light" msgstr "无影光源" #: pmlightedit.cpp:60 msgid "Tightness:" msgstr "" #: pmlightedit.cpp:63 msgid "Point at:" msgstr "指向：" #: pmlightedit.cpp:65 msgid "Parallel" msgstr "" #: pmlightedit.cpp:67 pmphotonsedit.cpp:54 msgid "Area light" msgstr "区域光源" #: pmlightedit.cpp:69 #, fuzzy msgid "Area type:" msgstr "代数类型：" #: pmlightedit.cpp:71 #, fuzzy msgid "Rectangular" msgstr "镜面：" #: pmlightedit.cpp:72 msgid "Circular" msgstr "" #: pmlightedit.cpp:75 msgid "Axis 1:" msgstr "轴 1：" #: pmlightedit.cpp:77 msgid "Axis 2:" msgstr "轴 2：" #: pmlightedit.cpp:81 msgid "Size 1:" msgstr "尺寸 1：" #: pmlightedit.cpp:84 msgid "Size 2:" msgstr "尺寸 2：" #: pmlightedit.cpp:88 msgid "Adaptive:" msgstr "适应：" #: pmlightedit.cpp:89 #, fuzzy msgid "Orient" msgstr "渐变" #: pmlightedit.cpp:90 pmrendermodesdialog.cpp:341 msgid "Jitter" msgstr "抖动" #: pmlightedit.cpp:92 msgid "Fading" msgstr "渐弱" #: pmlightedit.cpp:102 msgid "Media interaction" msgstr "介质交互作用" #: pmlightedit.cpp:103 msgid "Media attenuation" msgstr "介质衰减" #: pmlightgroup.cpp:52 #, fuzzy msgid "light group" msgstr "光源" #: pmlightgroupedit.cpp:38 #, fuzzy msgid "Global lights" msgstr "全局设置" #: pmlineedits.cpp:68 msgid "Please enter a float value between %1 and %2" msgstr "请输入一个在 %1 和 %2 之间的浮点数" #: pmlineedits.cpp:75 #, c-format msgid "Please enter a float value >= %1" msgstr "请输入一个 >= %1 的浮点数值" #: pmlineedits.cpp:79 #, c-format msgid "Please enter a float value > %1" msgstr "请输入一个 > %1 的浮点数值" #: pmlineedits.cpp:86 #, c-format msgid "Please enter a float value <= %1" msgstr "请输入一个 <= %1 的浮点数值" #: pmlineedits.cpp:90 #, c-format msgid "Please enter a float value < %1" msgstr "请输入一个 < %1 的浮点数值" #: pmlineedits.cpp:98 pmvectoredit.cpp:206 pmvectorlistedit.cpp:309 msgid "Please enter a valid float value!" msgstr "请输入一个有效的浮点数值！" #: pmlineedits.cpp:184 msgid "Please enter an integer value between %1 and %2" msgstr "请输入一个在 %1 和 %2 之间的整数值" #: pmlineedits.cpp:189 #, c-format msgid "Please enter an integer value >= %1" msgstr "请输入一个 >= %1 的整数值" #: pmlineedits.cpp:193 #, c-format msgid "Please enter an integer value <= %1" msgstr "请输入一个 <= %1 的整数值" #: pmlineedits.cpp:200 msgid "Please enter a valid integer value!" msgstr "请输入一个有效的整数值！" #: pmlinkedit.cpp:60 msgid "Prototype:" msgstr "原型：" #: pmlistpattern.cpp:253 msgid "texture list" msgstr "纹理列表" #: pmlistpattern.cpp:292 msgid "pigment list" msgstr "颜料列表" #: pmlistpattern.cpp:331 msgid "color list" msgstr "颜色列表" #: pmlistpattern.cpp:370 msgid "density list" msgstr "密度列表" #: pmlistpattern.cpp:416 msgid "normal list" msgstr "普通图列表" #: pmlistpatternedit.cpp:50 msgid "Checkers" msgstr "方格" #: pmlistpatternedit.cpp:51 msgid "Brick" msgstr "砖格" #: pmlistpatternedit.cpp:52 msgid "Hexagon" msgstr "六边形" #: pmlistpatternedit.cpp:67 msgid "Brick size:" msgstr "砖格尺寸：" #: pmlistpatternedit.cpp:72 msgid "Mortar:" msgstr "" #: pmlistpatternedit.cpp:183 msgid "You can have at most two child items for that list type!" msgstr "该列表类型您最多只能指定两个子项！" #: pmlookslike.cpp:49 msgid "looks like" msgstr "别名" #: pmmaterial.cpp:68 msgid "material" msgstr "材质" #: pmmaterialmap.cpp:246 msgid "material map" msgstr "材质映射图" #: pmmedia.cpp:159 msgid "media" msgstr "介质" #: pmmediaedit.cpp:46 pmrendermodesdialog.cpp:326 msgid "Method:" msgstr "方法：" #: pmmediaedit.cpp:48 msgid "1 (Monte Carlo)" msgstr "" #: pmmediaedit.cpp:49 #, fuzzy msgid "2 (Smooth)" msgstr "平滑" #: pmmediaedit.cpp:50 msgid "3 (Adaptive sampling)" msgstr "" #: pmmediaedit.cpp:55 msgid "Intervals:" msgstr "间隔：" #: pmmediaedit.cpp:62 msgid "Samples" msgstr "样本数" #: pmmediaedit.cpp:82 msgid "Ratio:" msgstr "比例：" #: pmmediaedit.cpp:89 #, fuzzy msgid "Anti-aliasing" msgstr "边缘平滑" #: pmmediaedit.cpp:90 msgid "Level:" msgstr "" #: pmmediaedit.cpp:103 msgid "Absorption" msgstr "吸收" #: pmmediaedit.cpp:113 msgid "Emission" msgstr "发出" #: pmmediaedit.cpp:121 msgid "Scattering" msgstr "散射" #: pmmediaedit.cpp:128 msgid "Isotropic" msgstr "各向同性" #: pmmediaedit.cpp:129 msgid "Mie Haze" msgstr "" #: pmmediaedit.cpp:130 msgid "Mie Murky" msgstr "" #: pmmediaedit.cpp:131 msgid "Rayleigh" msgstr "瑞利" #: pmmediaedit.cpp:132 msgid "Henyey-Greenstein" msgstr "" #: pmmediaedit.cpp:141 msgid "Eccentricity:" msgstr "离心率：" #: pmmediaedit.cpp:145 msgid "Extinction:" msgstr "退化：" #: pmmediaedit.cpp:270 #, fuzzy msgid "Maximum number of samples lower than minimum number." msgstr "最大样本数必须比最小样本数要大。" #: pmmesh.cpp:117 msgid "mesh" msgstr "" #: pmmeshedit.cpp:40 msgid "Inside vector:" msgstr "" #: pmmovecommand.cpp:33 #, fuzzy, c-format msgid "Move %1" msgstr "移动 %1" #: pmmovecommand.cpp:57 msgid "Move Objects" msgstr "移动对象" #: pmmovecommand.cpp:358 msgid "Can't insert the declare \"%1\" at that point." msgstr "该场合不能插入声明“%1”。" #: pmmovecommand.cpp:361 msgid "The declare \"%1\" can't be moved behind linked objects." msgstr "声明“%1”不能移动到链接目标的后面。" #: pmmovecommand.cpp:449 msgid "" "The %1 \"%2\" can't be moved because it contains a link to the declare " "\"%3\" and the insert point is not after the declare." msgstr "" "%1 “%2”不能被移动，因为它含有到声明“%3”的链接并且插入点不在该声明后面。" #: pmnormal.cpp:91 msgid "normal" msgstr "普通图" #: pmnormaledit.cpp:43 msgid "Bump size" msgstr "凸起大小" #: pmnormaledit.cpp:50 msgid "Accuracy" msgstr "" #: pmnormaledit.cpp:56 pmpigmentedit.cpp:37 pmtextureedit.cpp:37 msgid "UV mapping" msgstr "" #: pmobjectlibrarysettings.cpp:41 #, fuzzy msgid "Libraries" msgstr "对象库" #: pmobjectlibrarysettings.cpp:49 #, fuzzy msgid "Create..." msgstr "旋转" #: pmobjectlibrarysettings.cpp:63 #, fuzzy msgid "Library Details" msgstr "库对象" #: pmobjectlibrarysettings.cpp:67 msgid "Author" msgstr "" #: pmobjectlibrarysettings.cpp:69 pmpluginsettings.cpp:69 msgid "Description" msgstr "描述" #: pmobjectlibrarysettings.cpp:156 msgid "The folder already exists." msgstr "" #: pmobjectlibrarysettings.cpp:159 #, fuzzy msgid "Could not create the folder." msgstr "不能保存文件。" #: pmobjectlibrarysettings.cpp:176 msgid "This library is not modifiable." msgstr "" #: pmobjectlibrarysettings.cpp:178 msgid "This library is modifiable." msgstr "" #: pmobjectlink.cpp:58 msgid "object link" msgstr "目标链接" #: pmobjectlink.cpp:163 pmtexturebase.cpp:152 msgid "Declare \"%1\" has wrong type." msgstr "声明“%1”的类型错误。" #: pmobjectselect.cpp:88 msgid "Choose Object" msgstr "选择目标" #: pmobjectsettings.cpp:58 msgid "Subdivisions" msgstr "各对象设置" #: pmobjectsettings.cpp:64 msgid "Sphere:" msgstr "球体：" #: pmobjectsettings.cpp:77 msgid "Cylinder:" msgstr "圆柱：" #: pmobjectsettings.cpp:85 msgid "Cone:" msgstr "锥体：" #: pmobjectsettings.cpp:93 msgid "Torus:" msgstr "环形体：" #: pmobjectsettings.cpp:106 msgid "Disc:" msgstr "圆盘：" #: pmobjectsettings.cpp:114 msgid "Blob sphere:" msgstr "团点球体：" #: pmobjectsettings.cpp:127 msgid "Blob cylinder:" msgstr "团点球柱：" #: pmobjectsettings.cpp:140 msgid "Lathe:" msgstr "旋转体：" #: pmobjectsettings.cpp:153 msgid "Surface of revolution:" msgstr "旋转柱面：" #: pmobjectsettings.cpp:166 msgid "Prism:" msgstr "棱柱：" #: pmobjectsettings.cpp:174 msgid "Superquadric ellipsoid:" msgstr "超二次椭球：" #: pmobjectsettings.cpp:187 #, fuzzy msgid "Sphere sweep:" msgstr "线性延伸" #: pmobjectsettings.cpp:200 #, fuzzy msgid "Heightfield:" msgstr "高度场" #: pmobjectsettings.cpp:208 msgid "Sizes" msgstr "大小" #: pmobjectsettings.cpp:215 msgid "Plane:" msgstr "平面：" #: pmobjectsettings.cpp:223 msgid "Camera Views" msgstr "镜头视图" #: pmobjectsettings.cpp:228 msgid "High detail for enhanced projections" msgstr "高清晰、增强的投影" #: pmopenglsettings.cpp:33 #, fuzzy msgid "Direct rendering" msgstr "禁用 OpenGL 渲染" #: pmopenglsettings.cpp:34 msgid "Changes take only effect after a restart!" msgstr "" #: pmoutputdevice.cpp:60 msgid "The object \"%1\" doesn't support %2." msgstr "" #: pmoutputdevice.cpp:65 msgid "The class \"%1\" doesn't support %2." msgstr "" #: pmpalettevalueedit.cpp:48 msgid "Index" msgstr "索引" #: pmpalettevalueedit.cpp:53 msgid "Value" msgstr "值" #: pmparser.cpp:91 msgid "Using the default value of 0.0 for clock" msgstr "时钟使用默认值 0.0" #: pmparser.cpp:94 msgid "Using the default value of 1.0 for clock_delta" msgstr "clock_delta 使用默认值 1.0" #: pmparser.cpp:97 msgid "" "Note: The full povray syntax is not supported yet. If you want to add " "unsupported povray code to the scene, you can put this code between the two " "special comments \"//*PMRawBegin\" and \"//*PMRawEnd\"." msgstr "" "注意：完整的 povray 语法还没有都实现。如果您要在场景里添加尚未支持的 povray " "代码，您可以把该代码放在两个特别的注释“//*PMRawBegin”和“//*PMRawEnd”之间。" #: pmparser.cpp:110 msgid "Line %1: " msgstr "行 %1：" #: pmparser.cpp:124 pmserializer.cpp:74 msgid "Maximum of %1 errors reached." msgstr "已发现最大 %1 个错误。" #: pmparser.cpp:139 pmserializer.cpp:89 msgid "Maximum of %1 warnings reached." msgstr "已发现最大 %1 个警告。" #: pmparser.cpp:147 pmparser.cpp:153 msgid "'%1' expected, found token '%2' instead." msgstr "需要‘%1’，却发现标记‘%2’。" #: pmparser.cpp:159 msgid "Unexpected token '%1'." msgstr "意外的标记“%1”。" #: pmparser.cpp:164 msgid "Info" msgstr "信息" #: pmparser.cpp:256 pmparser.cpp:272 msgid "Can't insert %1 into %2." msgstr "不能把 %1 插入 %2。" #: pmparser.cpp:382 pmparser.cpp:384 msgid "Undefined object \"%1\"." msgstr "未定义的对象“%1”。" #: pmparser.cpp:411 msgid "Object \"%1\" is undefined at that point." msgstr "该场合对象“%1”是未定义的。" #: pmpart.cpp:244 #, fuzzy msgid "Import..." msgstr "导入 Povray..." #: pmpart.cpp:247 #, fuzzy msgid "&Export..." msgstr "导出 Povray(&E)..." #: pmpart.cpp:254 pmrendermodesdialog.cpp:41 pmrendermodesdialog.cpp:243 msgid "Render Modes" msgstr "渲染方式" #: pmpart.cpp:259 msgid "Render" msgstr "渲染" #: pmpart.cpp:261 msgid "Render Modes..." msgstr "渲染方式..." #: pmpart.cpp:263 pmpovraywidget.cpp:108 msgid "Render Window" msgstr "渲染窗口" #: pmpart.cpp:265 #, fuzzy msgid "Visibility level:" msgstr "可见层次：" #: pmpart.cpp:266 #, fuzzy msgid "Visibility Level" msgstr "可见层次" #: pmpart.cpp:272 #, fuzzy msgid "Global detail:" msgstr "全局设置" #: pmpart.cpp:273 #, fuzzy msgid "Global Detail Level" msgstr "全局设置" #: pmpart.cpp:286 msgid "Global Settings" msgstr "全局设置" #: pmpart.cpp:289 msgid "Sky Sphere" msgstr "天空球体" #: pmpart.cpp:292 msgid "Rainbow" msgstr "彩虹" #: pmpart.cpp:295 msgid "Fog" msgstr "雾" #: kpovmodelerui.rc:80 pmpart.cpp:298 #, no-c-format msgid "Interior" msgstr "内部" #: pmpart.cpp:304 msgid "Density" msgstr "密度" #: kpovmodelerui.rc:77 pmpart.cpp:307 #, no-c-format msgid "Material" msgstr "材质" #: pmpart.cpp:319 msgid "Cone" msgstr "锥体" #: pmpart.cpp:322 msgid "Torus" msgstr "环形体" #: pmpart.cpp:326 msgid "Lathe" msgstr "旋转体" #: pmpart.cpp:329 msgid "Prism" msgstr "棱柱" #: pmpart.cpp:332 msgid "Surface of Revolution" msgstr "旋转柱面" #: pmpart.cpp:335 msgid "Superquadric Ellipsoid" msgstr "超二次椭球" #: pmpart.cpp:339 msgid "Julia Fractal" msgstr "Julia 分形" #: pmpart.cpp:342 msgid "Height Field" msgstr "高度场" #: pmpart.cpp:345 msgid "Text" msgstr "文字" #: pmpart.cpp:349 msgid "Blob" msgstr "团点" #: pmpart.cpp:352 msgid "Blob Sphere" msgstr "团点球体" #: pmpart.cpp:355 msgid "Blob Cylinder" msgstr "团点球柱" #: pmpart.cpp:359 msgid "Plane" msgstr "平面" #: pmpart.cpp:362 msgid "Polynom" msgstr "多项式曲面" #: pmpart.cpp:366 msgid "Declaration" msgstr "声明" #: pmpart.cpp:369 msgid "Object Link" msgstr "对象链" #: pmpart.cpp:386 msgid "Bounded By" msgstr "外包围" #: pmpart.cpp:389 msgid "Clipped By" msgstr "剪切" #: pmpart.cpp:393 msgid "Light" msgstr "光源" #: pmpart.cpp:396 msgid "Looks Like" msgstr "别名" #: pmpart.cpp:399 msgid "Projected Through" msgstr "" #: pmpart.cpp:403 msgid "Bicubic Patch" msgstr "双三次补丁" #: pmpart.cpp:406 msgid "Disc" msgstr "圆盘" #: pmpart.cpp:418 msgid "Texture" msgstr "纹理" #: pmpart.cpp:422 msgid "Pigment" msgstr "颜料" #: pmpart.cpp:428 msgid "Solid Color" msgstr "纯色" #: pmpart.cpp:432 msgid "Texture List" msgstr "纹理列表" #: pmpart.cpp:435 msgid "Color List" msgstr "颜色列表" #: pmpart.cpp:438 msgid "Pigment List" msgstr "颜料列表" #: pmpart.cpp:441 msgid "Normal List" msgstr "普通图列表" #: pmpart.cpp:444 msgid "Density List" msgstr "密度列表" #: pmpart.cpp:448 msgid "Finish" msgstr "抛光" #: pmpart.cpp:452 msgid "Pattern" msgstr "图案" #: pmpart.cpp:455 msgid "Blend Map Modifiers" msgstr "混合映射图修饰" #: pmpart.cpp:458 msgid "Texture Map" msgstr "纹理映射图" #: pmpart.cpp:461 msgid "Material Map" msgstr "材质映射图" #: pmpart.cpp:464 msgid "Pigment Map" msgstr "颜料映射图" #: pmpart.cpp:467 msgid "Color Map" msgstr "色彩映射图" #: pmpart.cpp:470 msgid "Normal Map" msgstr "普通图映射图" #: pmpart.cpp:473 msgid "Bump Map" msgstr "凸起映射图" #: pmpart.cpp:476 msgid "Slope Map" msgstr "梯度映射图" #: pmpart.cpp:479 msgid "Density Map" msgstr "密度映射图" #: pmpart.cpp:482 pmpatternedit.cpp:81 msgid "Slope" msgstr "梯度" #: pmpart.cpp:486 msgid "Warp" msgstr "扭曲" #: pmpart.cpp:489 msgid "Image Map" msgstr "图像映射图" #: pmpart.cpp:492 msgid "QuickColor" msgstr "" #: pmpart.cpp:496 msgid "Translate" msgstr "位移" #: pmpart.cpp:499 pmscalecontrolpoint.cpp:28 msgid "Scale" msgstr "缩放" #: pmpart.cpp:502 msgid "Rotate" msgstr "旋转" #: pmpart.cpp:505 msgid "Matrix" msgstr "矩阵" #: pmpart.cpp:509 msgid "Comment" msgstr "注解" #: pmpart.cpp:512 msgid "Raw Povray" msgstr "Povray 源码" #: pmpart.cpp:517 msgid "Iso Surface" msgstr "" #: pmpart.cpp:520 pmrendermodesdialog.cpp:350 msgid "Radiosity" msgstr "辐射" #: pmpart.cpp:523 #, fuzzy msgid "Global Photons" msgstr "全局设置" #: kpovmodelerui.rc:114 pmpart.cpp:526 #, fuzzy, no-c-format msgid "Photons" msgstr "全局设置" #: pmpart.cpp:529 #, fuzzy msgid "Light Group" msgstr "光源" #: pmpart.cpp:532 #, fuzzy msgid "Interior Texture" msgstr "内部" #: pmpart.cpp:535 #, fuzzy msgid "Sphere Sweep" msgstr "线性延伸" #: pmpart.cpp:538 msgid "Mesh" msgstr "" #: pmpart.cpp:543 msgid "Search Object" msgstr "查找对象" #: pmpart.cpp:1376 pmpart.cpp:1379 #, fuzzy, c-format msgid "Import %1" msgstr "导入 Povray..." #: pmpart.cpp:1447 msgid "Cutting selection..." msgstr "正在剪切选择区..." #: pmpart.cpp:1462 msgid "Deleting selection..." msgstr "正在删除选择区..." #: pmpart.cpp:1471 msgid "Copying selection to clipboard..." msgstr "正在将选择区复制到剪贴板..." #: pmpart.cpp:1484 pmpart.cpp:1522 msgid "Drag" msgstr "拖动" #: pmpart.cpp:1545 msgid "Drop" msgstr "放" #: pmpart.cpp:1550 msgid "Inserting clipboard contents..." msgstr "正在插入剪贴板内容..." #: pmpart.cpp:1679 msgid "Undo last change..." msgstr "取消最后的改变..." #: pmpart.cpp:1697 msgid "Redo last change..." msgstr "重做最后的改变..." #: pmpart.cpp:2230 msgid "Declare" msgstr "声明" #: pmpattern.cpp:554 msgid "pattern" msgstr "模板图案" #: pmpatternedit.cpp:60 msgid "Agate" msgstr "" #: pmpatternedit.cpp:61 msgid "Average" msgstr "普通" #: pmpatternedit.cpp:62 msgid "Boxed" msgstr "盒子" #: pmpatternedit.cpp:63 msgid "Bozo" msgstr "" #: pmpatternedit.cpp:64 msgid "Bumps" msgstr "凸起" #: pmpatternedit.cpp:65 msgid "Cells" msgstr "" #: pmpatternedit.cpp:66 msgid "Crackle" msgstr "裂纹" #: pmpatternedit.cpp:68 msgid "Density File" msgstr "密度文件" #: pmpatternedit.cpp:69 msgid "Dents" msgstr "凹坑" #: pmpatternedit.cpp:70 msgid "Gradient" msgstr "渐变" #: pmpatternedit.cpp:71 msgid "Granite" msgstr "花岗岩" #: pmpatternedit.cpp:72 msgid "Julia" msgstr "" #: pmpatternedit.cpp:73 msgid "Leopard" msgstr "豹斑" #: pmpatternedit.cpp:74 msgid "Mandel" msgstr "" #: pmpatternedit.cpp:75 msgid "Marble" msgstr "大理石" #: pmpatternedit.cpp:76 msgid "Onion" msgstr "洋葱" #: pmpatternedit.cpp:78 msgid "Quilt" msgstr "方格" #: pmpatternedit.cpp:79 msgid "Radial" msgstr "放射的" #: pmpatternedit.cpp:80 msgid "Ripples" msgstr "波纹" #: pmpatternedit.cpp:83 msgid "Spiral1" msgstr "螺旋1" #: pmpatternedit.cpp:84 msgid "Spiral2" msgstr "螺旋1" #: pmpatternedit.cpp:85 msgid "Spotted" msgstr "斑点" #: pmpatternedit.cpp:86 msgid "Waves" msgstr "波浪" #: pmpatternedit.cpp:87 msgid "Wood" msgstr "木头" #: pmpatternedit.cpp:88 msgid "Wrinkles" msgstr "皱纹" #: pmpatternedit.cpp:101 #, fuzzy msgid "Form:" msgstr "公式：" #: pmpatternedit.cpp:107 #, fuzzy msgid "Metric:" msgstr "金属感：" #: pmpatternedit.cpp:111 pmtextedit.cpp:62 pmwarpedit.cpp:68 msgid "Offset:" msgstr "偏移：" #: pmpatternedit.cpp:114 msgid "Solid:" msgstr "" #: pmpatternedit.cpp:122 msgid "File:" msgstr "文件：" #: pmpatternedit.cpp:129 msgid "Interpolation:" msgstr "插值：" #: pmpatternedit.cpp:132 msgid "Trilinear" msgstr "三线" #: pmpatternedit.cpp:137 msgid "Gradient:" msgstr "渐变：" #: pmpatternedit.cpp:142 #, fuzzy msgid "Complex number:" msgstr "螺旋数：" #: pmpatternedit.cpp:150 #, fuzzy msgid "Magnet" msgstr "文字" #: pmpatternedit.cpp:153 #, fuzzy msgid "Type 1" msgstr "类型：" #: pmpatternedit.cpp:154 #, fuzzy msgid "Type 2" msgstr "类型：" #: pmpatternedit.cpp:171 #, fuzzy msgid "Exterior type:" msgstr "函数类型：" #: pmpatternedit.cpp:173 pmpatternedit.cpp:186 msgid "0: Returns Just 1" msgstr "" #: pmpatternedit.cpp:174 msgid "1: Iterations Until Bailout" msgstr "" #: pmpatternedit.cpp:175 pmpatternedit.cpp:188 msgid "2: Real Part" msgstr "" #: pmpatternedit.cpp:176 pmpatternedit.cpp:189 msgid "3: Imaginary Part" msgstr "" #: pmpatternedit.cpp:177 pmpatternedit.cpp:190 msgid "4: Squared Real Part" msgstr "" #: pmpatternedit.cpp:178 pmpatternedit.cpp:191 msgid "5: Squared Imaginary Part" msgstr "" #: pmpatternedit.cpp:179 msgid "6: Absolute Value" msgstr "" #: pmpatternedit.cpp:184 #, fuzzy msgid "Interior type:" msgstr "内部" #: pmpatternedit.cpp:187 msgid "1: Absolute Value Smallest" msgstr "" #: pmpatternedit.cpp:192 msgid "6: Absolute Value Last" msgstr "" #: pmpatternedit.cpp:200 msgid "Quilt controls:" msgstr "格子控制：" #: pmpatternedit.cpp:218 #, fuzzy msgid "Low slope:" msgstr "梯度" #: pmpatternedit.cpp:222 #, fuzzy msgid "High slope:" msgstr "梯度" #: pmpatternedit.cpp:228 #, fuzzy msgid "Altitiude" msgstr "高度：" #: pmpatternedit.cpp:234 #, fuzzy msgid "Low altitude:" msgstr "高度：" #: pmpatternedit.cpp:238 #, fuzzy msgid "High altitude:" msgstr "高度：" #: pmpatternedit.cpp:245 msgid "Spiral number:" msgstr "螺旋数：" #: pmpatternedit.cpp:257 #, fuzzy msgid "Use Global Setting" msgstr "全局设置" #: pmpatternedit.cpp:269 pmwarpedit.cpp:117 msgid "Value:" msgstr "值：" #: pmphotons.cpp:100 #, fuzzy msgid "photons" msgstr "全局设置" #: pmphotonsedit.cpp:45 #, fuzzy msgid "Target" msgstr "文字" #: pmphotonsedit.cpp:46 msgid "Spacing multiplier:" msgstr "" #: pmphotonsedit.cpp:50 #, fuzzy msgid "Refraction" msgstr "折射：" #: pmphotonsedit.cpp:52 #, fuzzy msgid "Collect" msgstr "选择" #: pmphotonsedit.cpp:53 msgid "Pass through" msgstr "" #: pmpigment.cpp:72 msgid "pigment" msgstr "颜料" #: pmplane.cpp:68 msgid "plane" msgstr "平面" #: pmplane.cpp:217 msgid "Distance" msgstr "距离" #: pmpluginsettings.cpp:46 msgid "loaded" msgstr "已载入" #: pmpluginsettings.cpp:48 msgid "deactivated" msgstr "未激活" #: pmpluginsettings.cpp:59 msgid "Installed Plugins" msgstr "已安装的插件" #: pmpluginsettings.cpp:68 msgid "Name" msgstr "名称" #: pmpluginsettings.cpp:70 msgid "Status" msgstr "状态" #: pmpluginsettings.cpp:74 pmpluginsettings.cpp:130 pmpluginsettings.cpp:144 msgid "Load" msgstr "载入" #: pmpluginsettings.cpp:128 pmpluginsettings.cpp:142 msgid "Deactivate" msgstr "取消激活" #: pmpolynom.cpp:109 msgid "quadric" msgstr "二次" #: pmpolynom.cpp:111 msgid "cubic" msgstr "三次" #: pmpolynom.cpp:113 msgid "quartic" msgstr "四次" #: pmpolynom.cpp:114 msgid "polynom" msgstr "多项式曲面" #: pmpolynomedit.cpp:45 msgid "Order" msgstr "阶次" #: pmpolynomedit.cpp:51 msgid "Formula:" msgstr "公式：" #: pmpovray31format.cpp:142 #, fuzzy msgid "POV-Ray 3.1 Files (*.pov, *.inc)" msgstr "Povray 文件 (*.pov, *.inc)" #: pmpovray31format.cpp:149 #, fuzzy msgid "POV-Ray 3.1 Files (*.pov)" msgstr "POV-Ray 文件(*.pov)" #: pmpovray31format.cpp:150 #, fuzzy msgid "POV-Ray 3.1 Include Files (*.ini)" msgstr "POV-Ray 包含文件(*.ini)" #: pmpovray35format.cpp:89 #, fuzzy msgid "POV-Ray 3.5 Files (*.pov, *.inc)" msgstr "Povray 文件 (*.pov, *.inc)" #: pmpovray35format.cpp:96 #, fuzzy msgid "POV-Ray 3.5 Files (*.pov)" msgstr "POV-Ray 文件(*.pov)" #: pmpovray35format.cpp:97 #, fuzzy msgid "POV-Ray 3.5 Include Files (*.ini)" msgstr "POV-Ray 包含文件(*.ini)" #: pmpovraymatrix.cpp:56 msgid "matrix" msgstr "矩阵" #: pmpovrayparser.cpp:186 msgid "Boolean expression expected" msgstr "需要布尔表达式" #: pmpovrayparser.cpp:399 msgid "Found turbulence without a pattern." msgstr "发现没有模板图案的扰动。" #: pmpovrayparser.cpp:548 msgid "Invalid list member." msgstr "无效的列表成员。" #: pmpovrayparser.cpp:791 msgid "identifier" msgstr "标识符" #: pmpovrayparser.cpp:968 msgid "Float, color or vector identifier expected." msgstr "需要浮点、色彩或者向量标识符。" #: pmpovrayparser.cpp:974 msgid "Undefined identifier \"%1\"." msgstr "未定义的标识符“%1”。" #: pmpovrayparser.cpp:1043 msgid "Bad operands for period operator." msgstr "点运算符的操作数错误。" #: pmpovrayparser.cpp:1072 pmpovrayparser.cpp:1097 pmpovrayparser.cpp:1122 #: pmpovrayparser.cpp:1141 pmpovrayparser.cpp:1555 msgid "Float or vector expression expected" msgstr "需要浮点或向量表达式" #: pmpovrayparser.cpp:1150 pmpovrayparser.cpp:1160 pmpovrayparser.cpp:1170 #: pmpovrayparser.cpp:1181 pmpovrayparser.cpp:1191 pmpovrayparser.cpp:1234 #: pmpovrayparser.cpp:1252 pmpovrayparser.cpp:1577 msgid "Float expression expected" msgstr "需要浮点表达式" #: pmpovrayparser.cpp:1330 pmpovrayparser.cpp:1344 msgid "You can't multiply a vector with a color" msgstr "您不能把一个向量和颜色相乘" #: pmpovrayparser.cpp:1390 msgid "You can't divide a vector by a color" msgstr "您不能用向量除以一个颜色" #: pmpovrayparser.cpp:1404 msgid "You can't divide a color by a vector" msgstr "您不能用颜色除以一个向量" #: pmpovrayparser.cpp:1446 msgid "You can't add a vector and a color" msgstr "您不能把一个向量和颜色相加" #: pmpovrayparser.cpp:1460 msgid "You can't add a vector with a color" msgstr "您不能把一个颜色加到向量上" #: pmpovrayparser.cpp:1502 pmpovrayparser.cpp:1516 msgid "You can't subtract a vector and a color" msgstr "您不能把一个向量和颜色相减" #: pmpovrayparser.cpp:1609 pmpovrayparser.cpp:1620 msgid "Color expression expected" msgstr "需要颜色表达式" #: pmpovrayparser.cpp:1995 msgid "The threshold value has to be positive" msgstr "阈值必须是正数" #: pmpovrayparser.cpp:2187 msgid "height field type" msgstr "高度场类型" #: pmpovrayparser.cpp:2192 msgid "height field file" msgstr "高度场文件" #: pmpovrayparser.cpp:2234 msgid "The water level has to be between 0 and 1" msgstr "水平面必须在 0 和 1 之间" #: pmpovrayparser.cpp:2269 msgid "font file name" msgstr "字体文件名" #: pmpovrayparser.cpp:2279 msgid "string of text" msgstr "文字字符串" #: pmpovrayparser.cpp:2430 msgid "Maximum iterations are less than 1, fixed" msgstr "最大迭代次数小于 1，已修正" #: pmpovrayparser.cpp:2441 msgid "Precision is less than 1.0, fixed" msgstr "精度小于 1.0，已修正" #: pmpovrayparser.cpp:2576 msgid "The polynom order has to be between 2 and 7 inclusive" msgstr "多项式的阶次必须在 2 和 7 (包含 2 和 7)之间" #: pmpovrayparser.cpp:2589 msgid "%1 coefficients are needed for a polynom with order %2" msgstr "阶次为 %2 的多项式中需要 %1 系数" #: pmpovrayparser.cpp:2645 msgid "Patch type has to be 0 or 1" msgstr "补丁类型必须是 0 或 1" #: pmpovrayparser.cpp:2885 msgid "At least %1 points are needed for that spline type" msgstr "该样条类型需要至少 %1 个点" #: pmpovrayparser.cpp:2889 msgid "Bezier splines need 4 points for each segment" msgstr "贝塞尔曲线样条每段需要 4 个点。" #: pmpovrayparser.cpp:3013 pmpovrayparser.cpp:3032 msgid "Linear splines need at least 4 points." msgstr "线性样条至少需要 4 个点。" #: pmpovrayparser.cpp:3029 msgid "Linear spline not closed" msgstr "线性样条没有闭合" #: pmpovrayparser.cpp:3058 msgid "Quadratic splines need at least 5 points." msgstr "二次曲线样条至少需要 5 个点。" #: pmpovrayparser.cpp:3074 msgid "Quadratic spline not closed" msgstr "二次曲线样条没有闭合" #: pmpovrayparser.cpp:3092 msgid "Cubic splines need at least 6 points." msgstr "三次曲线样条至少需要 6 个点。" #: pmpovrayparser.cpp:3114 msgid "Cubic spline not closed" msgstr "三次曲线样条没有闭合" #: pmpovrayparser.cpp:3132 pmpovrayparser.cpp:3155 msgid "Bezier spline not closed" msgstr "贝塞尔曲线样条没有闭合" #: pmpovrayparser.cpp:3219 msgid "At least 4 points are needed for the surface of revolution" msgstr "旋转柱面需要至少 4 个点" #: pmpovrayparser.cpp:3233 msgid "The v coordinate of point %1 and %2 must be different; fixed" msgstr "点 %1 和 %2 的 v 坐标必须不同：已修正" #: pmpovrayparser.cpp:3246 msgid "The v coordinates must be strictly increasing; fixed" msgstr "v 坐标必须是严格递增的：已修正" #: pmpovrayparser.cpp:3300 msgid "The east-west exponent must be greater than 0.001" msgstr "东-西指数必须比 0.001 大" #: pmpovrayparser.cpp:3305 msgid "The north-south exponent must be greater than 0.001" msgstr "南-北指数必须比 0.001 大" #: pmpovrayparser.cpp:3376 msgid "Wrong number of matrix values." msgstr "矩阵数值个数不正确。" #: pmpovrayparser.cpp:3748 pmpovrayparser.cpp:4413 pmpovrayparser.cpp:4485 #: pmpovrayparser.cpp:4543 pmpovrayparser.cpp:4599 pmpovrayparser.cpp:4652 #: pmpovrayparser.cpp:4952 pmpovrayparser.cpp:5008 pmpovrayparser.cpp:5373 #: pmpovrayparser.cpp:5490 pmpovrayparser.cpp:5526 pmpovrayparser.cpp:5634 #: pmpovrayparser.cpp:5760 pmpovrayparser.cpp:5888 pmpovrayparser.cpp:5924 #: pmpovrayparser.cpp:6012 pmpovrayparser.cpp:6158 pmpovrayparser.cpp:6648 msgid "Wrong declare type" msgstr "声明类型错误" #: pmpovrayparser.cpp:3846 pmpovrayparser.cpp:4742 pmpovrayparser.cpp:4868 #: pmpovrayparser.cpp:5102 msgid "Expecting a file name." msgstr "需要一个文件名。" #: pmpovrayparser.cpp:4222 msgid "Expecting a warp type" msgstr "需要一个扭曲类型" #: pmpovrayparser.cpp:4734 pmpovrayparser.cpp:4860 pmpovrayparser.cpp:5094 msgid "Unknown bitmap type" msgstr "未知的位图类型" #: pmpovrayparser.cpp:6247 msgid "Using Old Reflection Syntax" msgstr "" #: pmpovrayparser.cpp:6618 msgid "One graphical object expected" msgstr "需要一个图形对象" #: pmpovrayrenderwidget.cpp:72 msgid "Can't render an empty scene.\n" msgstr "无法渲染空的场景。\n" #: pmpovrayrenderwidget.cpp:82 msgid "Couldn't write the scene to a temp file.\n" msgstr "无法将场景写入临时文件。\n" #: pmpovrayrenderwidget.cpp:141 msgid "" "Couldn't call povray.\n" "Please check your installation or set another povray command." msgstr "" "无法调用 povray。\n" "请检查您的安装或者设置正确的 povray 命令。" #: pmpovraysettings.cpp:50 msgid "Povray Command" msgstr "Povray 命令" #: pmpovraysettings.cpp:54 msgid "Command:" msgstr "命令：" #: pmpovraysettings.cpp:64 msgid "Povray User Documentation" msgstr "Povray 用户文档" #: pmpovraysettings.cpp:68 msgid "Path:" msgstr "路径：" #: pmpovraysettings.cpp:78 msgid "Version:" msgstr "版本：" #: pmpovraysettings.cpp:87 msgid "Library Paths" msgstr "库路径" #: pmpovraysettings.cpp:97 msgid "Add..." msgstr "添加..." #: pmpovraysettings.cpp:104 pmrendermodesdialog.cpp:61 msgid "Edit..." msgstr "编辑..." #: pmpovraysettings.cpp:108 pmrendermodesdialog.cpp:63 msgid "Up" msgstr "上" #: pmpovraysettings.cpp:111 pmrendermodesdialog.cpp:65 msgid "Down" msgstr "下" #: pmpovraysettings.cpp:190 msgid "Povray only supports up to 20 library paths." msgstr "Povray 只支持最多 20 个库路径。" #: pmpovraysettings.cpp:203 pmpovraysettings.cpp:257 msgid "The list of library paths already contains this path." msgstr "库路径列表中已经包括此路径。" #: pmpovraywidget.cpp:70 msgid "Suspend" msgstr "挂起" #: pmpovraywidget.cpp:73 msgid "Resume" msgstr "继续" #: pmpovraywidget.cpp:175 msgid "running" msgstr "正在运行" #: pmpovraywidget.cpp:211 msgid "suspended" msgstr "已挂起" #: pmpovraywidget.cpp:257 msgid "" "Unknown image format.\n" "Please enter a valid suffix." msgstr "" "未知的图像格式。\n" "请输入有效的后缀。" #: pmpovraywidget.cpp:264 msgid "Format is not supported for writing." msgstr "该格式不支持写入。" #: pmpovraywidget.cpp:305 msgid "" "Couldn't correctly write the image.\n" "Wrong image format?" msgstr "" "不能正确地写入图像。\n" "错误的图像格式？" #: pmpovraywidget.cpp:309 msgid "" "Couldn't write the image.\n" "Permission denied." msgstr "" "不能写入图像。\n" "权限不够。" #: pmpovraywidget.cpp:331 msgid "finished" msgstr "完成" #: pmpovraywidget.cpp:336 #, fuzzy msgid "" "Povray exited abnormally.\n" "See the povray output for details." msgstr "" "Povray 异常退出，错误代码为 %1。\n" "详情请见 povray 输出。" #: pmpovraywidget.cpp:408 msgid "running, %1 pixels/second" msgstr "正在运行，%1 象素/秒" #: pmpreviewsettings.cpp:45 msgid "Size:" msgstr "大小：" #: pmpreviewsettings.cpp:50 msgid "Gamma:" msgstr "对比度：" #: pmpreviewsettings.cpp:55 msgid "Rendered Objects" msgstr "渲染的对象" #: pmpreviewsettings.cpp:66 msgid "Wall" msgstr "墙壁" #: pmpreviewsettings.cpp:70 msgid "Enable wall" msgstr "启用墙壁" #: pmpreviewsettings.cpp:73 pmpreviewsettings.cpp:88 msgid "Color 1:" msgstr "颜色 1：" #: pmpreviewsettings.cpp:76 pmpreviewsettings.cpp:91 msgid "Color 2:" msgstr "颜色 2：" #: pmpreviewsettings.cpp:81 msgid "Floor" msgstr "地板" #: pmpreviewsettings.cpp:85 msgid "Enable floor" msgstr "启用地板" #: pmpreviewsettings.cpp:96 pmrendermodesdialog.cpp:321 msgid "Antialiasing" msgstr "边缘平滑" #: pmpreviewsettings.cpp:100 msgid "Enable antialiasing" msgstr "启用边缘平滑" #: pmpreviewsettings.cpp:181 msgid "At least one object has to be selected." msgstr "必须至少选择一个对象。" #: pmprism.cpp:189 msgid "prism" msgstr "棱柱" #: pmprism.cpp:626 msgid "Height 1" msgstr "高度 1" #: pmprism.cpp:630 msgid "Height 2" msgstr "高度 2" #: pmprism.cpp:648 pmprism.cpp:681 msgid "Point %1.%2" msgstr "点 %1.%2" #: pmprismedit.cpp:62 msgid "Sweep type:" msgstr "延伸类型：" #: pmprismedit.cpp:64 msgid "Linear Sweep" msgstr "线性延伸" #: pmprismedit.cpp:65 msgid "Conic Sweep" msgstr "锥形延伸" #: pmprismedit.cpp:75 msgid "Height 1:" msgstr "高度 1：" #: pmprismedit.cpp:80 msgid "Height 2:" msgstr "高度 2：" #: pmprismedit.cpp:209 msgid "Sub prism %1:" msgstr "子棱柱 %1：" #: pmprismedit.cpp:222 #, fuzzy msgid "Add sub prism" msgstr "添加子棱柱" #: pmprismedit.cpp:232 #, fuzzy msgid "Remove sub prism" msgstr "删除子棱柱" #: pmprismedit.cpp:271 msgid "New sub prism" msgstr "新建子棱柱" #: pmprismedit.cpp:283 #, fuzzy msgid "Append sub prism" msgstr "附加子棱柱" #: pmprismedit.cpp:403 msgid "Linear splines need at least 3 points." msgstr "线性样条至少需要 3 个点。" #: pmprismedit.cpp:411 msgid "Quadratic splines need at least 4 points." msgstr "二次曲线样条至少需要 4 个点。" #: pmprismedit.cpp:419 msgid "Cubic splines need at least 5 points." msgstr "三次曲线样条至少需要 5 个点。" #: pmprismedit.cpp:427 msgid "Bezier splines need 3 points for each segment." msgstr "贝塞尔曲线样条每段需要 3 个点。" #: pmprismedit.cpp:555 #, fuzzy msgid "Sub prisms do not work with bezier splines in POV-Ray 3.1." msgstr "POV-Ray 3.1 中子棱柱不能使用贝塞尔曲线样条" #: pmprojectedthrough.cpp:49 msgid "projected through" msgstr "" #: pmprototypemanager.cpp:114 pmprototypemanager.cpp:115 msgid "object declaration" msgstr "对象声明" #: pmprototypemanager.cpp:116 pmprototypemanager.cpp:133 msgid "texture declaration" msgstr "纹理声明" #: pmprototypemanager.cpp:117 msgid "pigment declaration" msgstr "颜料声明" #: pmprototypemanager.cpp:118 msgid "normal declaration" msgstr "普通图声明" #: pmprototypemanager.cpp:119 msgid "finish declaration" msgstr "抛光声明" #: pmprototypemanager.cpp:120 msgid "texture map declaration" msgstr "纹理映射图声明" #: pmprototypemanager.cpp:121 msgid "pigment map declaration" msgstr "颜料映射图声明" #: pmprototypemanager.cpp:122 msgid "color map declaration" msgstr "色彩映射图声明" #: pmprototypemanager.cpp:123 msgid "normal map declaration" msgstr "普通图映射图声明" #: pmprototypemanager.cpp:124 msgid "slope map declaration" msgstr "梯度映射图声明" #: pmprototypemanager.cpp:125 msgid "density map declaration" msgstr "密度映射图声明" #: pmprototypemanager.cpp:126 #, fuzzy msgid "interior declaration" msgstr "内表面声明" #: pmprototypemanager.cpp:127 msgid "media declaration" msgstr "介质声明" #: pmprototypemanager.cpp:128 msgid "sky sphere declaration" msgstr "天空球体声明" #: pmprototypemanager.cpp:129 msgid "rainbow declaration" msgstr "彩虹声明" #: pmprototypemanager.cpp:130 msgid "fog declaration" msgstr "雾声明" #: pmprototypemanager.cpp:131 msgid "material declaration" msgstr "材质声明" #: pmprototypemanager.cpp:132 msgid "density declaration" msgstr "密度声明" #: pmquickcolor.cpp:57 msgid "quick color" msgstr "" #: pmradiosity.cpp:141 #, fuzzy msgid "radiosity" msgstr "辐射" #: pmradiosityedit.cpp:54 #, fuzzy msgid "Always sample" msgstr "模糊样本数：" #: pmradiosityedit.cpp:87 #, fuzzy msgid "Maximum sample:" msgstr "最大距离：" #: pmradiosityedit.cpp:111 msgid "Pretrace start:" msgstr "" #: pmradiosityedit.cpp:117 #, fuzzy msgid "Pretrace end:" msgstr "继续" #: pmrainbow.cpp:144 msgid "rainbow" msgstr "彩虹" #: pmrainbowedit.cpp:83 msgid "Arc angle:" msgstr "圆弧角度：" #: pmrainbowedit.cpp:88 msgid "Falloff angle:" msgstr "张开角度：" #: pmrainbowedit.cpp:204 msgid "Arc angle is smaller than falloff angle in rainbow." msgstr "彩虹的圆弧角度比张开角度小。" #: pmrainbowedit.cpp:210 msgid "Direction vector is zero." msgstr "方向向量是 0。" #: pmrainbowedit.cpp:216 msgid "Up vector is zero." msgstr "上向量是 0。" #: pmrainbowedit.cpp:223 msgid "Direction and up vectors are co-linear." msgstr "方向向量和上向量是线性相关的。" #: pmraw.cpp:59 msgid "raw povray" msgstr "povray 源码" #: pmrawedit.cpp:38 msgid "Povray code:" msgstr "Povray 源码：" #: pmrendermanager.cpp:1317 msgid "not supported" msgstr "不支持" #: pmrendermanager.cpp:1320 msgid "approximated" msgstr "近似支持" #: pmrendermanager.cpp:1517 msgid "left" msgstr "左" #: pmrendermanager.cpp:1520 msgid "right" msgstr "右" #: pmrendermanager.cpp:1523 msgid "bottom" msgstr "底" #: pmrendermanager.cpp:1526 msgid "top" msgstr "顶" #: pmrendermanager.cpp:1529 msgid "front" msgstr "前" #: pmrendermanager.cpp:1532 msgid "back" msgstr "后" #: pmrendermode.cpp:51 msgid "New mode" msgstr "新方式" #: pmrendermodesdialog.cpp:228 msgid "0, 1: Quick colors, full ambient lighting only" msgstr "0，1：快速色彩，只完全使用环境光" #: pmrendermodesdialog.cpp:229 msgid "2, 3: Show specified diffuse and ambient light" msgstr "2，3：显示指定的漫反射和环境光" #: pmrendermodesdialog.cpp:230 msgid "4: Render shadows, but no extended lights" msgstr "4：渲染阴影，但是不包括扩展的光线" #: pmrendermodesdialog.cpp:231 msgid "5: Render shadows, including extended lights" msgstr "5：渲染阴影，包括扩展的光线" #: pmrendermodesdialog.cpp:232 msgid "6, 7: Compute texture patterns" msgstr "6，7：计算纹理图案" #: pmrendermodesdialog.cpp:233 msgid "8: Compute reflected, refracted, and transmitted rays" msgstr "8：计算反射、折射和透射的光线" #: pmrendermodesdialog.cpp:234 msgid "9: Compute media" msgstr "9：计算介质" #: pmrendermodesdialog.cpp:235 msgid "10: Compute radiosity but no media" msgstr "10：计算辐射性但是没有介质" #: pmrendermodesdialog.cpp:236 msgid "11: Compute radiosity and media" msgstr "11：计算辐射性和介质" #: pmrendermodesdialog.cpp:269 msgid "Size" msgstr "大小" #: pmrendermodesdialog.cpp:284 msgid "Subsection" msgstr "子章节" #: pmrendermodesdialog.cpp:289 msgid "Start column:" msgstr "开始列：" #: pmrendermodesdialog.cpp:293 msgid "End column:" msgstr "结束列：" #: pmrendermodesdialog.cpp:297 msgid "Start row:" msgstr "开始行：" #: pmrendermodesdialog.cpp:301 msgid "End row:" msgstr "结束行：" #: pmrendermodesdialog.cpp:311 msgid "Quality" msgstr "质量" #: pmrendermodesdialog.cpp:315 msgid "Quality:" msgstr "质量：" #: pmrendermodesdialog.cpp:329 msgid "Non Recursive" msgstr "非递归的" #: pmrendermodesdialog.cpp:330 msgid "Recursive" msgstr "递归" #: pmrendermodesdialog.cpp:357 msgid "Output" msgstr "输出" #: pmrendermodesdialog.cpp:360 msgid "Alpha" msgstr "Alpha" #: pmrendermodesdialog.cpp:449 msgid "Please enter a description for the render mode." msgstr "请输入渲染模式的描述。" #: pmrotate.cpp:56 msgid "rotate" msgstr "旋转" #: pmrotatecontrolpoint.cpp:28 msgid "Rotation" msgstr "旋转" #: pmscale.cpp:56 msgid "scale" msgstr "缩放" #: pmscanner.cpp:579 msgid "Unexpected character '%1' after \"%2\"" msgstr "在“%2”后面的意外字符“%1”" #: pmscanner.cpp:582 msgid "Unexpected character %1 after \"%2\"" msgstr "在“%2”后面的意外字符 %1" #: pmscanner.cpp:626 msgid "Function statement not terminated" msgstr "未终止的函数注释" #: pmscanner.cpp:931 msgid "Unknown directive" msgstr "未知的指令" #: pmscanner.cpp:953 pmscanner.cpp:982 msgid "String not terminated" msgstr "未终止的字符串" #: pmscanner.cpp:1069 pmscanner.cpp:1091 pmscanner.cpp:1123 pmscanner.cpp:1174 msgid "Comment not terminated" msgstr "未终止的注释" #: pmscanner.cpp:1226 pmscanner.cpp:1269 pmscanner.cpp:1295 msgid "Raw povray not terminated" msgstr "未终止的 povray 源码" #: pmscene.cpp:52 msgid "scene" msgstr "场景" #: pmsettingsdialog.cpp:63 msgid "Povray" msgstr "Povray" #: pmsettingsdialog.cpp:64 msgid "Povray Options" msgstr "Povray 选项" #: kpovmodelerui.rc:295 pmsettingsdialog.cpp:70 pmsettingsdialog.cpp:78 #: pmsettingsdialog.cpp:87 pmsettingsdialog.cpp:95 #, no-c-format msgid "Graphical View" msgstr "图形视图" #: pmsettingsdialog.cpp:71 msgid "OpenGL" msgstr "OpenGL" #: pmsettingsdialog.cpp:72 msgid "OpenGL Display Settings" msgstr "OpenGL 显示设置" #: pmsettingsdialog.cpp:80 msgid "Colors" msgstr "颜色" #: pmsettingsdialog.cpp:81 msgid "Color Settings" msgstr "颜色设置" #: pmsettingsdialog.cpp:88 msgid "Grid" msgstr "网格" #: pmsettingsdialog.cpp:89 msgid "Grid Settings" msgstr "网格设置" #: pmsettingsdialog.cpp:96 pmtreeview.cpp:59 msgid "Objects" msgstr "对象" #: pmsettingsdialog.cpp:97 msgid "Display Settings for Objects" msgstr "对象显示选项" #: pmsettingsdialog.cpp:103 msgid "Properties View" msgstr "属性视图" #: pmsettingsdialog.cpp:105 msgid "Texture Preview" msgstr "纹理预览" #: pmsettingsdialog.cpp:106 msgid "Display Settings for Texture Previews" msgstr "纹理预览的显示设置" #: pmsettingsdialog.cpp:113 msgid "Display Settings for View Layouts" msgstr "视图布局的显示设置" #: pmsettingsdialog.cpp:120 msgid "Object Libraries" msgstr "对象库" #: pmsettingsdialog.cpp:121 msgid "Display Settings for Object Libraries" msgstr "对象库的显示设置" #: pmsettingsdialog.cpp:129 msgid "Plugins" msgstr "插件" #: pmsettingsdialog.cpp:130 msgid "Plugin Settings" msgstr "插件设置" #: pmshell.cpp:111 msgid "Show &Path" msgstr "显示路径(&P)" #: pmshell.cpp:114 msgid "Hide &Path" msgstr "隐藏路径(&P)" #: pmshell.cpp:127 msgid "New Top View" msgstr "新建顶视图" #: pmshell.cpp:130 msgid "New Bottom View" msgstr "新建底视图" #: pmshell.cpp:133 msgid "New Left View" msgstr "新建左视图" #: pmshell.cpp:136 msgid "New Right View" msgstr "新建右视图" #: pmshell.cpp:139 msgid "New Front View" msgstr "新建前视图" #: pmshell.cpp:142 msgid "New Back View" msgstr "新建后视图" #: pmshell.cpp:145 msgid "New Camera View" msgstr "新建镜头视图" #: pmshell.cpp:149 msgid "New Object Tree" msgstr "新建对象树" #: pmshell.cpp:152 msgid "New Properties View" msgstr "新建属性视图" #: pmshell.cpp:157 msgid "New Library Browser" msgstr "新建库浏览器" #: pmshell.cpp:163 msgid "View Layouts" msgstr "视图布局" #: pmshell.cpp:170 msgid "Save View Layout..." msgstr "保存视图布局..." #: pmshell.cpp:405 pmshell.cpp:438 msgid "Povray Modeler Files (*.kpm)" msgstr "Povray 建模文件(*.kpm)" #: pmshell.cpp:406 pmshell.cpp:439 msgid "All Files" msgstr "所有文件" #: pmshell.cpp:426 msgid "No changes need to be saved" msgstr "没有改变需要保存" #: pmshell.cpp:459 msgid "Couldn't save the file." msgstr "不能保存文件。" #: pmshell.cpp:601 pmviewlayoutmanager.cpp:227 msgid "unknown" msgstr "未知" #: pmshell.cpp:652 msgid "" "A file with this name already exists.\n" "Do you want to overwrite it?" msgstr "" "已经存在这个名字的文件。\n" "您要覆盖它吗？" #: pmshell.cpp:652 msgid "Overwrite" msgstr "" #: pmskysphere.cpp:69 msgid "skysphere" msgstr "天空球体" #: pmslope.cpp:57 msgid "slope" msgstr "梯度" #: pmslopeedit.cpp:51 msgid "Slope:" msgstr "梯度：" #: pmsolidcolor.cpp:55 msgid "solid color" msgstr "纯色" #: pmsolidobjectedit.cpp:34 pmwarpedit.cpp:111 msgid "Inverse" msgstr "反转" #: pmsolidobjectedit.cpp:35 msgid "Hollow" msgstr "空心" #: pmsor.cpp:140 msgid "surface of revolution" msgstr "旋转柱面" #: pmsor.cpp:435 msgid "Point %1 (yz)" msgstr "点 %1 (yz)" #: pmsoredit.cpp:144 msgid "The surface of revolution object needs at least 4 points." msgstr "旋转柱面对象需要至少 4 个点。" #: pmsoredit.cpp:162 msgid "The v coordinate of point %1 and %2 must be different." msgstr "点 %1 和 %2 的 v 坐标必须是不同的。" #: pmsoredit.cpp:174 msgid "The v coordinates must be strictly increasing." msgstr "v 坐标必须是严格递增的。" #: pmsphere.cpp:71 msgid "sphere" msgstr "球体" #: pmspheresweep.cpp:156 #, fuzzy msgid "sphere sweep" msgstr "球体" #: pmspheresweep.cpp:437 #, c-format msgid "Center %1" msgstr "中心 %1" #: pmspheresweep.cpp:441 msgid "Radius %1 (x)" msgstr "半径 %1 (x)" #: pmspheresweep.cpp:445 msgid "Radius %1 (y)" msgstr "半径 %1 (y)" #: pmspheresweep.cpp:449 msgid "Radius %1 (z)" msgstr "半径 %1 (z)" #: pmspheresweep.cpp:521 #, fuzzy msgid "Add Sphere" msgstr "球体" #: pmspheresweep.cpp:525 #, fuzzy msgid "Remove Sphere" msgstr "删除过滤器" #: pmspheresweepedit.cpp:51 #, fuzzy msgid "B-Spline" msgstr "贝塞尔曲线" #: pmspheresweepedit.cpp:62 #, fuzzy msgid "Spheres:" msgstr "球体：" #: pmspheresweepedit.cpp:88 #, fuzzy msgid "Tolerance" msgstr "扰动" #: pmspheresweepedit.cpp:221 #, fuzzy msgid "B-splines need at least 4 points." msgstr "三次曲线样条至少需要 4 个点。" #: pmsqe.cpp:66 msgid "superquadric ellipsoid" msgstr "超二次椭球" #: pmsqeedit.cpp:42 msgid "Exponents:" msgstr "指数：" #: pmsqeedit.cpp:46 msgid "East-west:" msgstr "东-西：" #: pmsqeedit.cpp:48 msgid "North-south:" msgstr "南-北：" #: pmtext.cpp:71 msgid "text" msgstr "文字" #: pmtextedit.cpp:43 msgid "Font:" msgstr "字体：" #: pmtextedit.cpp:51 msgid "Text:" msgstr "文字：" #: pmtexture.cpp:72 msgid "texture" msgstr "纹理" #: pmtexturemap.cpp:367 msgid "texture map" msgstr "纹理映射图" #: pmtexturemap.cpp:413 msgid "pigment map" msgstr "颜料映射图" #: pmtexturemap.cpp:459 msgid "color map" msgstr "色彩映射图" #: pmtexturemap.cpp:505 msgid "normal map" msgstr "普通图映射图" #: pmtexturemap.cpp:551 msgid "slope map" msgstr "梯度映射图" #: pmtexturemap.cpp:597 msgid "density map" msgstr "密度映射图" #: pmtexturemapedit.cpp:39 msgid "Map values:" msgstr "映射值：" #: pmtexturemapedit.cpp:40 msgid "(No Child Objects)" msgstr "(无子对象)" #: pmtexturemapedit.cpp:41 msgid "(Pure Link)" msgstr "(纯链接)" #: pmtexturemapedit.cpp:142 msgid "The map values have to be increasing." msgstr "映射值必须是递增的。" #: pmtorus.cpp:74 msgid "torus" msgstr "环形体" #: pmtorus.cpp:155 msgid "Major radius (x)" msgstr "主半径 (x)" #: pmtorus.cpp:159 msgid "Major radius (z)" msgstr "主半径 (z)" #: pmtorus.cpp:165 msgid "Minor radius (y)" msgstr "次半径 (y)" #: pmtorus.cpp:168 msgid "Minor radius (z)" msgstr "次半径 (z)" #: pmtorusedit.cpp:48 msgid "Minor radius:" msgstr "次半径：" #: pmtorusedit.cpp:50 pmwarpedit.cpp:153 msgid "Major radius:" msgstr "主半径：" #: pmtranslate.cpp:55 msgid "translate" msgstr "平移" #: pmtranslatecontrolpoint.cpp:25 msgid "Translation" msgstr "平移" #: pmtreeview.cpp:52 pmtreeview.cpp:817 msgid "Object Tree" msgstr "对象树" #: pmtriangle.cpp:195 msgid "smooth triangle" msgstr "平滑三角形" #: pmtriangle.cpp:196 msgid "triangle" msgstr "三角形" #: pmtriangle.cpp:456 msgid "Point 1" msgstr "点 1" #: pmtriangle.cpp:460 msgid "Normal 1" msgstr "法向 1" #: pmtriangle.cpp:463 msgid "Point 2" msgstr "点 2" #: pmtriangle.cpp:467 msgid "Normal 2" msgstr "法向 2" #: pmtriangle.cpp:470 msgid "Point 3" msgstr "点 3" #: pmtriangle.cpp:474 msgid "Normal 3" msgstr "法向 3" #: pmtriangleedit.cpp:58 msgid "Point %1:" msgstr "点 %1：" #: pmtriangleedit.cpp:65 msgid "Normal %1:" msgstr "法向 %1：" #: pmtriangleedit.cpp:72 msgid "UV vector %1:" msgstr "UV 向量 %1：" #: pmtriangleedit.cpp:79 msgid "Invert Normal Vectors" msgstr "反转法向量" #: pmtriangleedit.cpp:236 msgid "Please enter a valid triangle." msgstr "请输入一个有效的三角形。" #: pmtriangleedit.cpp:256 msgid "All normal vectors have to point to the same side of the triangle." msgstr "所有的法向量都必须指向三角形的同一侧。" #: pmunknownview.cpp:28 msgid "Unknown view type \"%1\"" msgstr "未知的视图类型“%1”" #: pmviewlayoutmanager.cpp:151 pmviewlayoutmanager.cpp:225 msgid "Unknown dock position." msgstr "未知的停靠位置。" #: pmviewlayoutmanager.cpp:208 msgid "Unknown view type." msgstr "未知的视图类型。" #: pmviewlayoutmanager.cpp:713 pmviewlayoutmanager.cpp:752 msgid "Could not open the view layouts file." msgstr "无法打开视图布局文件。" #: pmviewlayoutmanager.cpp:746 msgid "View layouts not found." msgstr "未找到视图布局。" #: pmviewlayoutmanager.cpp:871 msgid "Save View Layout" msgstr "保存视图布局" #: pmviewlayoutmanager.cpp:882 msgid "Enter view layout name:" msgstr "输入视图布局名称：" #: pmwarp.cpp:106 msgid "warp" msgstr "扭曲" #: pmwarpedit.cpp:46 msgid "Warp type:" msgstr "扭曲类型：" #: pmwarpedit.cpp:48 msgid "Repeat" msgstr "重复" #: pmwarpedit.cpp:49 msgid "Black Hole" msgstr "黑洞" #: pmwarpedit.cpp:72 msgid "Flip:" msgstr "翻转：" #: pmwarpedit.cpp:101 msgid "Repeat:" msgstr "重复：" #: pmwarpedit.cpp:142 msgid "Orientation:" msgstr "方向：" #: pmwarpedit.cpp:149 msgid "Distance exponent:" msgstr "距离指数：" #: pmxmlparser.cpp:64 msgid "Could not load the documents data!" msgstr "无法装载文档数据！" #: pmxmlparser.cpp:96 msgid "" "This document was created with a newer version of KPovModeler. The whole " "document may not be loaded correctly." msgstr "" "这个文档是用更新版本的 KPovModeler 创建的，整个文档也许不能完全正确装载。" #: pmxmlparser.cpp:114 pmxmlparser.cpp:175 msgid "Wrong top level tag" msgstr "错误的顶层标记" #: pmxmlparser.cpp:146 #, c-format msgid "Unknown object %1" msgstr "未知的对象 %1" #: kpovmodelershell.rc:50 #, no-c-format msgid "Library Toolbar" msgstr "库工具栏" #: kpovmodelerui.rc:18 #, no-c-format msgid "" "_: Insert menu\n" "&Insert" msgstr "" #: kpovmodelerui.rc:37 kpovmodelerui.rc:176 #, no-c-format msgid "Finite Solid Primitives" msgstr "有限实心图元" #: kpovmodelerui.rc:60 #, no-c-format msgid "Finite Patch Primitives" msgstr "有限补丁图元" #: kpovmodelerui.rc:66 #, no-c-format msgid "Infinite Solid Primitives" msgstr "无限实心图元" #: kpovmodelerui.rc:70 kpovmodelerui.rc:200 #, no-c-format msgid "Constructive Solid Geometry" msgstr "构造实心几何体" #: kpovmodelerui.rc:117 kpovmodelerui.rc:217 #, no-c-format msgid "Atmospheric Effects" msgstr "大气效果" #: kpovmodelerui.rc:123 kpovmodelerui.rc:244 #, no-c-format msgid "Transformations" msgstr "变换" #: kpovmodelerui.rc:207 #, no-c-format msgid "Infinite and Patch Primitives" msgstr "无限和补丁图元" #: kpovmodelerui.rc:223 #, no-c-format msgid "Misc Objects" msgstr "其它对象" #: kpovmodelerui.rc:289 #, no-c-format msgid "Povray Rendering" msgstr "Povray 渲染" #, fuzzy #~ msgid "Center" #~ msgstr "中心：" #, fuzzy #~ msgid "Import" #~ msgstr "导入 Povray..." #, fuzzy #~ msgid "Export" #~ msgstr "导出 Povray(&E)..." #, fuzzy #~ msgid "Left" #~ msgstr "左视图" #, fuzzy #~ msgid "Right" #~ msgstr "右：" #, fuzzy #~ msgid "Bottom" #~ msgstr "底" #, fuzzy #~ msgid "Top" #~ msgstr "顶" #, fuzzy #~ msgid "Back" #~ msgstr "后视图" #, fuzzy #~ msgid "Add" #~ msgstr "添加..." #, fuzzy #~ msgid "Remove" #~ msgstr "删除过滤器" #, fuzzy #~ msgid "Warning" #~ msgstr "正在运行" #, fuzzy #~ msgid "File" #~ msgstr "文件：" #, fuzzy #~ msgid "Properties" #~ msgstr "属性视图" #, fuzzy #~ msgid "Delete" #~ msgstr "删除 %1" #, fuzzy #~ msgid "Cut" #~ msgstr "计数：" #, fuzzy #~ msgid "Configure" #~ msgstr "置信度：" #, fuzzy #~ msgid "&Edit" #~ msgstr "编辑..." #, fuzzy #~ msgid "&File" #~ msgstr "文件：" #, fuzzy #~ msgid "&Insert" #~ msgstr "插入错误" #, fuzzy #~ msgid "&View" #~ msgstr "3D 视图" #, fuzzy #~ msgid "&Settings" #~ msgstr "网格设置" #, fuzzy #~ msgid "Main Toolbar" #~ msgstr "库工具栏" #, fuzzy #~ msgid "Visibility Level:" #~ msgstr "可见层次：" #, fuzzy #~ msgid "Global Detail:" #~ msgstr "库对象" #, fuzzy #~ msgid "Very low" #~ msgstr "下方" #, fuzzy #~ msgid "Very high" #~ msgstr "视图高度：" #~ msgid "Display only" #~ msgstr "只显示" #, fuzzy #~ msgid "Segment sub divisions" #~ msgstr "各对象设置" #, fuzzy #~ msgid "Radial divisions" #~ msgstr "各对象设置"