# translation of kpdf.po to Chinese Traditional
# Traditional(Big-5) Chinese translation for kpdf
# Copyright (C) 2003, 2006, 2007 Free Software Foundation, Inc.
#
# Original translator: Edward G.J. Lee <edt1023@info.sayya.org>, 2003.
# Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv dot tw>, 2006, 2007.
msgid ""
msgstr ""
"Project-Id-Version: kpdf\n"
"POT-Creation-Date: 2021-03-08 20:17+0000\n"
"PO-Revision-Date: 2007-04-12 12:11+0800\n"
"Last-Translator: Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv "
"dot tw>\n"
"Language-Team: Chinese Traditional <zh-l10n@linux.org.tw>\n"
"Language: \n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 1.11.4\n"

#. Instead of a literal translation, add your name to the end of the list (separated by a comma).
msgid ""
"_: NAME OF TRANSLATORS\n"
"Your names"
msgstr "Edward G.J. Lee,Frank  Weng (a.k.a. Franklin)"

#. Instead of a literal translation, add your email to the end of the list (separated by a comma).
msgid ""
"_: EMAIL OF TRANSLATORS\n"
"Your emails"
msgstr "edt1023@info.sayya.org,franklin at goodhorse dot idv dot tw"

#: conf/dlgperformance.ui.h:25
msgid ""
"Keeps used memory as low as possible. Do not reuse anything. (For systems "
"with low memory.)"
msgstr ""
"盡量減少記憶體使用量。不要重複使用任何東西。（給記憶體較少的系統用的。）"

#: conf/dlgperformance.ui.h:31
msgid ""
"A good compromise between memory usage and speed gain. Preload next page and "
"boost searches. (For systems with 256MB of memory, typically.)"
msgstr ""
"這是記憶體使用量與速度增益的折衷方案。預先載入下一頁並加速搜尋。（給 256 MB "
"左右記憶體的系統用的。）"

#: conf/dlgperformance.ui.h:37
msgid ""
"Keeps everything in memory. Preload next pages. Boost searches. (For systems "
"with more than 512MB of memory.)"
msgstr ""
"盡量在記憶體中保留每個東西。預先載入下一頁並加速搜尋。（給超過 512MB 記憶體的"
"系統用的。）"

#: conf/preferencesdialog.cpp:29
msgid "General"
msgstr "一般"

#: conf/preferencesdialog.cpp:29
msgid "General Options"
msgstr "一般選項"

#: conf/preferencesdialog.cpp:30
msgid "Accessibility"
msgstr "無障礙"

#: conf/preferencesdialog.cpp:30
msgid "Reading Aids"
msgstr "讀取協助"

#: conf/preferencesdialog.cpp:31
msgid "Performance"
msgstr "效能"

#: conf/preferencesdialog.cpp:31
msgid "Performance Tuning"
msgstr "效能微調"

#: conf/preferencesdialog.cpp:32
msgid "Presentation"
msgstr "展示"

#: conf/preferencesdialog.cpp:33
msgid "Options for Presentation Mode"
msgstr "展示模式選項"

#: core/document.cpp:750
msgid ""
"End of document reached.\n"
"Continue from the beginning?"
msgstr ""
"已遇到文件結尾。\n"
"要從頭開始嗎？"

#: core/document.cpp:796
msgid "No matches found for '%1'."
msgstr "找不到 %1。"

#: core/document.cpp:998 core/document.cpp:1006
msgid ""
"The pdf file is trying to execute an external application and for your "
"safety kpdf does not allow that."
msgstr "此 PDF 檔正試著執行外部應用程式，但為了安全起見，kpdf 不允許此動作。"

#: core/document.cpp:1019
#, c-format
msgid "No application found for opening file of mimetype %1."
msgstr "找不到用於開啟 MIME 型態為 %1 的檔案的應用程式。"

#: core/generator_pdf/generator_pdf.cpp:144
msgid "Please insert the password to read the document:"
msgstr "請輸入密碼以讀取文件："

#: core/generator_pdf/generator_pdf.cpp:146
msgid "Incorrect password. Try again:"
msgstr "密碼錯誤。請再試一次："

#: core/generator_pdf/generator_pdf.cpp:200
msgid "Title"
msgstr "標題"

#: core/generator_pdf/generator_pdf.cpp:201
msgid "Subject"
msgstr "主旨"

#: core/generator_pdf/generator_pdf.cpp:202
msgid "Author"
msgstr "作者"

#: core/generator_pdf/generator_pdf.cpp:203
msgid "Keywords"
msgstr "關鍵字"

#: core/generator_pdf/generator_pdf.cpp:204
msgid "Creator"
msgstr "檔案建立者"

#: core/generator_pdf/generator_pdf.cpp:205
msgid "Producer"
msgstr "產生者"

#: core/generator_pdf/generator_pdf.cpp:206
msgid "Created"
msgstr "已建立"

#: core/generator_pdf/generator_pdf.cpp:207
msgid "Modified"
msgstr "已修改"

#: core/generator_pdf/generator_pdf.cpp:211
#, c-format
msgid ""
"_: PDF v. <version>\n"
"PDF v. %1"
msgstr "PDF 版本 %1"

#: core/generator_pdf/generator_pdf.cpp:212
#: core/generator_pdf/generator_pdf.cpp:221
msgid "Format"
msgstr "格式"

#: core/generator_pdf/generator_pdf.cpp:213
msgid "Encrypted"
msgstr "已加密"

#: core/generator_pdf/generator_pdf.cpp:213
msgid "Unencrypted"
msgstr "已解密"

#: core/generator_pdf/generator_pdf.cpp:214
#: core/generator_pdf/generator_pdf.cpp:222
msgid "Security"
msgstr "安全性"

#: core/generator_pdf/generator_pdf.cpp:216
#: core/generator_pdf/generator_pdf.cpp:223
msgid "Optimized"
msgstr "最佳化"

#: core/generator_pdf/generator_pdf.cpp:217
msgid "Pages"
msgstr "頁數"

#: core/generator_pdf/generator_pdf.cpp:222
msgid "Unknown Encryption"
msgstr "未知的加密"

#: core/generator_pdf/generator_pdf.cpp:223
msgid "Unknown Optimization"
msgstr "未知的最佳化"

#: core/generator_pdf/generator_pdf.cpp:375
msgid "Name"
msgstr "名稱"

#: core/generator_pdf/generator_pdf.cpp:376
msgid "Type"
msgstr "類型"

#: core/generator_pdf/generator_pdf.cpp:377
msgid "Embedded"
msgstr "嵌入式"

#: core/generator_pdf/generator_pdf.cpp:487
msgid ""
"The margins you specified change the page aspect ratio. Do you want to print "
"with the aspect ratio changed or do you want the margins to be adapted so "
"that the aspect ratio is preserved?"
msgstr ""
"您指定的邊界會改變頁面的比例。您要依指定的邊界來列印，還是保留頁面比例並修改"
"邊界？"

#: core/generator_pdf/generator_pdf.cpp:488
msgid "Aspect ratio change"
msgstr "改變頁面比例"

#: core/generator_pdf/generator_pdf.cpp:489
msgid "Print with specified margins"
msgstr "以指定的邊界列印"

#: core/generator_pdf/generator_pdf.cpp:490
msgid "Print adapting margins to keep aspect ratio"
msgstr "調整邊界以符合比例"

#: core/generator_pdf/generator_pdf.cpp:713
msgid "unknown"
msgstr "未知"

#: core/generator_pdf/generator_pdf.cpp:714
msgid "Type 1"
msgstr "類型 1"

#: core/generator_pdf/generator_pdf.cpp:715
msgid "Type 1C"
msgstr "類型 1C"

#: core/generator_pdf/generator_pdf.cpp:716
msgid ""
"_: OT means OpenType\n"
"Type 1C (OT)"
msgstr "類型 1C（開放型態）"

#: core/generator_pdf/generator_pdf.cpp:717
msgid "Type 3"
msgstr "類型 3"

#: core/generator_pdf/generator_pdf.cpp:718
msgid "TrueType"
msgstr "TrueType"

#: core/generator_pdf/generator_pdf.cpp:719
msgid ""
"_: OT means OpenType\n"
"TrueType (OT)"
msgstr "TrueType（開放型態）"

#: core/generator_pdf/generator_pdf.cpp:720
msgid "CID Type 0"
msgstr "CID 類型 0"

#: core/generator_pdf/generator_pdf.cpp:721
msgid "CID Type 0C"
msgstr "CID 類型 0C"

#: core/generator_pdf/generator_pdf.cpp:722
msgid ""
"_: OT means OpenType\n"
"CID Type 0C (OT)"
msgstr "CID 類型 0C（開放型態）"

#: core/generator_pdf/generator_pdf.cpp:723
msgid "CID TrueType"
msgstr "CID TrueType"

#: core/generator_pdf/generator_pdf.cpp:724
msgid ""
"_: OT means OpenType\n"
"CID TrueType (OT)"
msgstr "CID TrueType（開放型態）"

#: core/generator_pdf/generator_pdf.cpp:757
#: core/generator_pdf/generator_pdf.cpp:759
#: core/generator_pdf/generator_pdf.cpp:764
msgid "-"
msgstr "-"

#: core/generator_pdf/generator_pdf.cpp:763
msgid "[none]"
msgstr "無"

#: core/generator_pdf/generator_pdf.cpp:784
#: core/generator_pdf/generator_pdf.cpp:788
#: core/generator_pdf/generator_pdf.cpp:802
msgid "Unknown"
msgstr "未知"

#: core/generator_pdf/generator_pdf.cpp:810
#: core/generator_pdf/generator_pdf.cpp:815
#: core/generator_pdf/generator_pdf.cpp:824
#: core/generator_pdf/generator_pdf.cpp:845
msgid "Unknown Date"
msgstr "未知日期"

#: core/link.cpp:21
#, c-format
msgid "Go to page %1"
msgstr "跳到第 %1 頁"

#: core/link.cpp:21
msgid "Open external file"
msgstr "開啟外部檔案"

#: core/link.cpp:26
msgid "Execute '%1'..."
msgstr "執行 %1..."

#: core/link.cpp:39
msgid "First Page"
msgstr "第一頁"

#: core/link.cpp:41
msgid "Previous Page"
msgstr "前一頁"

#: core/link.cpp:43
msgid "Next Page"
msgstr "下一頁"

#: core/link.cpp:45
msgid "Last Page"
msgstr "最後一頁"

#: core/link.cpp:49
msgid "Forward"
msgstr "往前"

#: core/link.cpp:53
msgid "Start Presentation"
msgstr "開始簡報"

#: core/link.cpp:55
msgid "End Presentation"
msgstr "結束簡報"

#: core/link.cpp:57
msgid "Find..."
msgstr "尋找..."

#: core/link.cpp:59
msgid "Go To Page..."
msgstr "跳到頁面..."

#: part.cpp:82
msgid "PDF Options"
msgstr "PDF 選項"

#: part.cpp:84
msgid "Force rasterization"
msgstr "強制光柵"

#: part.cpp:85
msgid "Rasterize into an image before printing"
msgstr "列印前在圖片上強制光柵"

#: part.cpp:86
msgid ""
"Forces the rasterization of each page into an image before printing it. This "
"usually gives somewhat worse results, but is useful when printing documents "
"that appear to print incorrectly."
msgstr ""
"在每一頁的圖片列印前強制光柵。通常結果會變差，但是若某些文件列印結果不正確"
"時，此選項可能有用。"

#: part.cpp:172
msgid "Show &Navigation Panel"
msgstr "顯示導覽面板(&N)"

#: part.cpp:173
msgid "Hide &Navigation Panel"
msgstr "隱藏導覽面板(&N)"

#: part.cpp:210 part.cpp:211
msgid "Thumbnails"
msgstr "縮圖"

#: part.cpp:257
msgid "Moves to the previous page of the document"
msgstr "移至文件前頁"

#: part.cpp:263
msgid "Moves to the next page of the document"
msgstr "移至文件次頁"

#: part.cpp:269
msgid "Moves to the first page of the document"
msgstr "移至文件首頁"

#: part.cpp:272
msgid "Moves to the last page of the document"
msgstr "移至文件尾頁"

#: part.cpp:275
msgid "Go to the place you were before"
msgstr "Go to the place you were before"

#: part.cpp:278
msgid "Go to the place you were after"
msgstr "Go to the place you were after"

#: part.cpp:290
msgid "Configure KPDF..."
msgstr "設定 KPDF..."

#: part.cpp:294
msgid "&Properties"
msgstr "內容(&P)"

#: part.cpp:297
msgid "P&resentation"
msgstr "展示(&R)"

#: part.cpp:391
msgid "KPDF::Part"
msgstr "KPDF::Part"

#: part.cpp:434
msgid "Converting from ps to pdf..."
msgstr "從 ps 轉換為 pdf..."

#: part.cpp:445
msgid "You do not have ps2pdf installed, so kpdf cannot open postscript files."
msgstr "您沒有安裝 ps2pdf，kpdf 無法開啟 postscript 檔。"

#: part.cpp:485
msgid ""
"The document is going to be launched on presentation mode because the file "
"requested it."
msgstr "文件將以展示模式開啟，因為檔案如此要求。"

#: part.cpp:513
#, c-format
msgid "Could not open %1"
msgstr "無法開啟 %1"

#: part.cpp:612
msgid "Reloading the document..."
msgstr "重新載入文件中..."

#: part.cpp:641
msgid ""
"This link points to a close document action that does not work when using "
"the embedded viewer."
msgstr "這個連結指到一個已關閉的文件動作，該動作在嵌入式檢視器中無法進行。"

#: part.cpp:689
msgid ""
"This link points to a quit application action that does not work when using "
"the embedded viewer."
msgstr "這個連結指到一個離開應用程式的動作，該動作在嵌入式檢視器中無法進行。"

#: part.cpp:702
msgid "Go to Page"
msgstr "跳頁"

#: part.cpp:711
msgid "&Page:"
msgstr "頁數(&P)："

#: part.cpp:809
msgid ""
"You are trying to overwrite \"%1\" with itself. This is not allowed. Please "
"save it in another location."
msgstr "您試著讓 %1 覆寫自己。這個動作不被允許。請儲存在其他位置。"

#: part.cpp:814
msgid ""
"A file named \"%1\" already exists. Are you sure you want to overwrite it?"
msgstr "檔案 %1 已存在，您是否要覆寫它？"

#: part.cpp:814
msgid "Overwrite"
msgstr "覆寫"

#: part.cpp:819
msgid "File could not be saved in '%1'. Try to save it to another location."
msgstr "無法儲存檔案到 %1。請儲存在其他位置。"

#: part.cpp:942
#, c-format
msgid "Page %1"
msgstr "頁 %1"

#: part.cpp:944
msgid "Remove Bookmark"
msgstr "移除書籤"

#: part.cpp:946
msgid "Add Bookmark"
msgstr "加入書籤"

#: part.cpp:948 ui/pageview.cpp:1587
msgid "Fit Width"
msgstr "符合寬度"

#: part.cpp:963
msgid "Tools"
msgstr "工具"

#: part.cpp:1058
msgid "Printing this document is not allowed."
msgstr "不允許列印此文件。"

#: part.cpp:1064
msgid "Could not print the document. Please report to bugs.trinitydesktop.org"
msgstr "無法列印此文件。請回報到 bugs.trinitydesktop.org"

#: shell/main.cpp:22
msgid "KPDF, a TDE PDF viewer based on XPDF"
msgstr "Kpdf，源自於 Xpdf 的 TDE pdf 瀏覽器"

#: shell/main.cpp:28
msgid "Document to open"
msgstr "要開啟的文件"

#: shell/main.cpp:36
msgid "KPDF"
msgstr "KPDF"

#: shell/main.cpp:45
msgid "Current mantainer"
msgstr "目前維護者"

#: shell/main.cpp:48
msgid "Xpdf author"
msgstr "Xpdf 作者"

#: shell/main.cpp:49
msgid "Icon"
msgstr "圖示"

#: shell/shell.cpp:86
msgid "Unable to find kpdf part."
msgstr "無法找到 kpdf 部份。"

#: shell/shell.cpp:132
msgid ""
"Click to open a file\n"
"Click and hold to open a recent file"
msgstr "點選以開啟檔案。 點選並按住以開啟最近的檔案。"

#: shell/shell.cpp:152
msgid ""
"<b>Click</b> to open a file or <b>Click and hold</b> to select a recent file"
msgstr "<b>點選</b>以開啟檔案，或是<b>點選並按住</b>以選擇最近開啟的檔案。"

#: ui/pageview.cpp:260
msgid "Fit to Page &Width"
msgstr "調整成適合頁面寬度(&W)"

#: ui/pageview.cpp:263
msgid "Fit to &Page"
msgstr "調整成適合頁面(&P)"

#: ui/pageview.cpp:266
msgid "Fit to &Text"
msgstr "調整成適合文字(&T)"

#: ui/pageview.cpp:271
#, fuzzy
msgid "Rotate Right"
msgstr "閃爍向右"

#: ui/pageview.cpp:274
#, fuzzy
msgid "Rotate Left"
msgstr "往左掃描"

#: ui/pageview.cpp:278
msgid "&Two Pages"
msgstr "兩頁(&T)"

#: ui/pageview.cpp:282
msgid "&Continuous"
msgstr "繼續(&C)"

#: ui/pageview.cpp:286
#, fuzzy
msgid "Co&ver Page"
msgstr "下一頁"

#: ui/pageview.cpp:292
msgid "&Browse Tool"
msgstr "瀏覽工具(&B)"

#: ui/pageview.cpp:296
msgid "&Zoom Tool"
msgstr "縮放工具(&Z)"

#: ui/pageview.cpp:299
msgid "&Select Tool"
msgstr "選擇工具(&S)"

#: ui/pageview.cpp:307
msgid "Scroll Up"
msgstr "捲軸向上"

#: ui/pageview.cpp:310
msgid "Scroll Down"
msgstr "捲軸向下"

#: ui/pageview.cpp:370
#, c-format
msgid ""
"_n:  Loaded a one-page document.\n"
" Loaded a %n-page document."
msgstr "已載入一份 %n 頁的文件。"

#: ui/pageview.cpp:670 ui/pageview.cpp:691 ui/pageview.cpp:1651
msgid "Text found: \"%1\"."
msgstr "找到文字：%1。"

#: ui/pageview.cpp:670 ui/pageview.cpp:1651
msgid "Text not found: \"%1\"."
msgstr "找不到文字：%1。"

#: ui/pageview.cpp:722
msgid "Starting -- find text as you type"
msgstr "正在開啟 -- 即時文字搜尋"

#: ui/pageview.cpp:1133
#, c-format
msgid ""
"_n: Text (1 character)\n"
"Text (%n characters)"
msgstr "文字（%n 個字元）"

#: ui/pageview.cpp:1134 ui/pageview.cpp:1141
msgid "Copy to Clipboard"
msgstr "複製到剪貼簿"

#: ui/pageview.cpp:1138
msgid "Speak Text"
msgstr "唸出文字"

#: ui/pageview.cpp:1140
msgid "Image (%1 by %2 pixels)"
msgstr "影像（%1 x %2 像素）"

#: ui/pageview.cpp:1142
msgid "Save to File..."
msgstr "儲存到檔案..."

#: ui/pageview.cpp:1160
msgid "Image [%1x%2] copied to clipboard."
msgstr "影像【%1 x %2】已複製到剪貼簿。"

#: ui/pageview.cpp:1167
msgid "File not saved."
msgstr "檔案未儲存。"

#: ui/pageview.cpp:1174
msgid "Image [%1x%2] saved to %3 file."
msgstr "影像【%1 x %2】已儲存到檔案 %3。"

#: ui/pageview.cpp:1203
#, c-format
msgid "Starting KTTSD Failed: %1"
msgstr "啟動 KTTSD 失敗：%1"

#: ui/pageview.cpp:1587
msgid "Fit Page"
msgstr "符合頁面"

#: ui/pageview.cpp:2036
msgid "Find stopped."
msgstr "已停止搜尋。"

#: ui/pageview.cpp:2046
msgid "Welcome"
msgstr "歡迎"

#: ui/pageview.cpp:2171
msgid "Select zooming area. Right-click to zoom out."
msgstr "選擇縮放區域。點右鍵以縮小。"

#: ui/pageview.cpp:2177
msgid "Draw a rectangle around the text/graphics to copy."
msgstr "在文字/圖形周圍畫一個矩形以複製。"

#: ui/presentationwidget.cpp:148
#, c-format
msgid "Title: %1"
msgstr "標題：%1"

#: ui/presentationwidget.cpp:150
#, c-format
msgid "Author: %1"
msgstr "作者：%1"

#: ui/presentationwidget.cpp:152
#, c-format
msgid "Pages: %1"
msgstr "頁面：%1"

#: ui/presentationwidget.cpp:153
msgid "Click to begin"
msgstr "點選以開始"

#: ui/presentationwidget.cpp:329
msgid ""
"There are two ways of exiting presentation mode, you can press either ESC "
"key or click with the quit button that appears when placing the mouse in the "
"top-right corner. Of course you can cycle windows (Alt+TAB by default)"
msgstr ""
"有兩個方法離開展示模式。您可以按下 ESC 鍵，或是將滑鼠移到右下角然後點選「離"
"開」。當然您也可以用 ALT+TAB 切換視窗。"

#: ui/propertiesdialog.cpp:23
msgid "Unknown File"
msgstr "未知的檔案"

#: ui/propertiesdialog.cpp:32
msgid "No document opened."
msgstr "沒有開啟文件。"

#: ui/propertiesdialog.cpp:38
msgid "%1 Properties"
msgstr "%1 內容"

#: ui/propertiesdialog.cpp:53
msgid "%1:"
msgstr "%1："

#: ui/propertiesdialog.cpp:66
msgid "Pages:"
msgstr "頁面："

#: ui/searchwidget.cpp:49
msgid "Enter at least 3 letters to filter pages"
msgstr "請至少輸入三個字母來過濾頁面"

#: ui/searchwidget.cpp:55
msgid "Clear filter"
msgstr "清除過濾器"

#: ui/searchwidget.cpp:59
msgid "Case Sensitive"
msgstr "區分大小寫"

#: ui/searchwidget.cpp:61
msgid "Match Phrase"
msgstr "符合片語"

#: ui/searchwidget.cpp:62
msgid "Match All Words"
msgstr "符合所有單字"

#: ui/searchwidget.cpp:63
msgid "Match Any Word"
msgstr "符合任何單字"

#: ui/searchwidget.cpp:68
msgid "Filter Options"
msgstr "過濾器選項"

#: ui/thumbnaillist.cpp:568
msgid "Show bookmarked pages only"
msgstr "只顯示書籤頁"

#: ui/toc.cpp:59
msgid "Topic"
msgstr "主題"

#: conf/dlgaccessibility.ui:27
#, no-c-format
msgid "Draw border around &Images"
msgstr "在影像周圍畫出框線(&I)"

#: conf/dlgaccessibility.ui:35
#, no-c-format
msgid "Draw border around &Links"
msgstr "在連結周圍畫出框線(&L)"

#: conf/dlgaccessibility.ui:51
#, no-c-format
msgid "Change &Colors"
msgstr "改變顏色(&C)"

#: conf/dlgaccessibility.ui:83
#, no-c-format
msgid "Warning: these options can badly affect drawing speed."
msgstr "警告：這些選項可能會嚴重影響速度。"

#: conf/dlgaccessibility.ui:125
#, no-c-format
msgid "&Invert colors"
msgstr "反轉顏色(&I)"

#: conf/dlgaccessibility.ui:136
#, no-c-format
msgid "Change &paper color"
msgstr "改變紙張顏色(&P)"

#: conf/dlgaccessibility.ui:172
#, no-c-format
msgid "Paper color:"
msgstr "紙張顏色："

#: conf/dlgaccessibility.ui:213
#, no-c-format
msgid "&Change dark and light colors"
msgstr "改變暗與亮的顏色(&C)"

#: conf/dlgaccessibility.ui:308
#, no-c-format
msgid "Light color:"
msgstr "亮的顏色："

#: conf/dlgaccessibility.ui:336
#, no-c-format
msgid "Dark color:"
msgstr "暗的顏色："

#: conf/dlgaccessibility.ui:346
#, no-c-format
msgid "Convert to &black and white"
msgstr "轉換成黑白(&B)"

#: conf/dlgaccessibility.ui:365
#, no-c-format
msgid "Contrast:"
msgstr "對比："

#: conf/dlgaccessibility.ui:488
#, no-c-format
msgid "Threshold:"
msgstr "下限："

#: conf/dlggeneral.ui:27
#, no-c-format
msgid "Program Look"
msgstr "程式外觀"

#: conf/dlggeneral.ui:49
#, no-c-format
msgid "Show &search bar in thumbnails list"
msgstr "在縮圖列表中顯示搜尋列(&S)"

#: conf/dlggeneral.ui:60
#, no-c-format
msgid "Link the &thumbnails with the page"
msgstr "將縮圖與頁面連結(&T)"

#: conf/dlggeneral.ui:68
#, no-c-format
msgid "Show scroll&bars"
msgstr "顯示捲軸列(&B)"

#: conf/dlggeneral.ui:76
#, no-c-format
msgid "Show &hints and info messages"
msgstr "顯示提示與資訊訊息(&H)"

#: conf/dlggeneral.ui:84
#, no-c-format
msgid "&Obey DRM limitations"
msgstr "遵循 DRM 限制(&O)"

#: conf/dlggeneral.ui:92
#, no-c-format
msgid "&Watch file"
msgstr "監看檔案(&W)"

#: conf/dlggeneral.ui:100
#, no-c-format
msgid "&Retain document viewing data"
msgstr ""

#: conf/dlgperformance.ui:35
#, no-c-format
msgid "CPU Usage"
msgstr "CPU 使用量"

#: conf/dlgperformance.ui:54
#, no-c-format
msgid "Enable &transparency effects"
msgstr "開啟透明效果(&T)"

#: conf/dlgperformance.ui:62
#, no-c-format
msgid "Enable &background generation"
msgstr "開啟背景產生(&B)"

#: conf/dlgperformance.ui:125
#, no-c-format
msgid "Memory Usage"
msgstr "記憶體使用量"

#: conf/dlgperformance.ui:158
#, no-c-format
msgid "&Low"
msgstr "低(&L)"

#: conf/dlgperformance.ui:166
#, no-c-format
msgid "&Normal (default)"
msgstr "正常（預設）(&N)"

#: conf/dlgperformance.ui:174
#, no-c-format
msgid "&Aggressive"
msgstr "高(&A)"

#: conf/dlgpresentation.ui:27
#, no-c-format
msgid "Navigation"
msgstr "導覽"

#: conf/dlgpresentation.ui:49
#, no-c-format
msgid " sec."
msgstr " 秒。"

#: conf/dlgpresentation.ui:60
#, no-c-format
msgid "Advance every:"
msgstr "自動跳張間隔："

#: conf/dlgpresentation.ui:68
#, no-c-format
msgid "Loop after last page"
msgstr "循環播放"

#: conf/dlgpresentation.ui:89
#, fuzzy, no-c-format
msgid "Blinds Vertical"
msgstr "垂直百頁簾"

#: conf/dlgpresentation.ui:94
#, fuzzy, no-c-format
msgid "Blinds Horizontal"
msgstr "水平百頁簾"

#: conf/dlgpresentation.ui:99
#, no-c-format
msgid "Box In"
msgstr "矩形內收"

#: conf/dlgpresentation.ui:104
#, no-c-format
msgid "Box Out"
msgstr "矩形外擴"

#: conf/dlgpresentation.ui:109
#, no-c-format
msgid "Dissolve"
msgstr "溶解"

#: conf/dlgpresentation.ui:114
#, no-c-format
msgid "Glitter Down"
msgstr "閃爍向下"

#: conf/dlgpresentation.ui:119
#, no-c-format
msgid "Glitter Right"
msgstr "閃爍向右"

#: conf/dlgpresentation.ui:124
#, no-c-format
msgid "Glitter Right-Down"
msgstr "閃爍向右下"

#: conf/dlgpresentation.ui:129
#, no-c-format
msgid "Random Transition"
msgstr "隨機變換"

#: conf/dlgpresentation.ui:139
#, fuzzy, no-c-format
msgid "Split Horizontal In"
msgstr "左右合擊"

#: conf/dlgpresentation.ui:144
#, fuzzy, no-c-format
msgid "Split Horizontal Out"
msgstr "左右分離"

#: conf/dlgpresentation.ui:149
#, fuzzy, no-c-format
msgid "Split Vertical In"
msgstr "上下合擊"

#: conf/dlgpresentation.ui:154
#, fuzzy, no-c-format
msgid "Split Vertical Out"
msgstr "上下分離"

#: conf/dlgpresentation.ui:159
#, no-c-format
msgid "Wipe Down"
msgstr "往下掃描"

#: conf/dlgpresentation.ui:164
#, no-c-format
msgid "Wipe Right"
msgstr "往右掃描"

#: conf/dlgpresentation.ui:169
#, no-c-format
msgid "Wipe Left"
msgstr "往左掃描"

#: conf/dlgpresentation.ui:174
#, no-c-format
msgid "Wipe Up"
msgstr "往上掃描"

#: conf/dlgpresentation.ui:186
#, no-c-format
msgid "Default transition:"
msgstr "預設換頁特效："

#: conf/dlgpresentation.ui:194
#, no-c-format
msgid "Mouse cursor:"
msgstr "滑鼠游標："

#: conf/dlgpresentation.ui:200
#, no-c-format
msgid "Hidden After Delay"
msgstr "延遲後隱藏"

#: conf/dlgpresentation.ui:205
#, no-c-format
msgid "Always Visible"
msgstr "永遠可見"

#: conf/dlgpresentation.ui:210
#, no-c-format
msgid "Always Hidden"
msgstr "永遠隱藏"

#: conf/dlgpresentation.ui:222
#, no-c-format
msgid "Background color:"
msgstr "背景顏色："

#: conf/dlgpresentation.ui:238
#, no-c-format
msgid "Show s&ummary page"
msgstr "顯示摘要頁(&U)"

#: conf/dlgpresentation.ui:246
#, no-c-format
msgid "Show &progress indicator"
msgstr "顯示進度指示器(&P)"

#: part.rc:29
#, no-c-format
msgid "&Go"
msgstr "跳至(&G)"

#, fuzzy
#~ msgid "Contents"
#~ msgstr "繼續(&C)"

#, fuzzy
#~ msgid "Properties"
#~ msgstr "內容(&P)"

#, fuzzy
#~ msgid "Page"
#~ msgstr "頁數"

#, fuzzy
#~ msgid "&Tools"
#~ msgstr "工具"