# translation of tdeio.po to Chinese Traditional # Copyright (C) 2001, 2002, 2006 Free Software Foundation, Inc. # # with reference from zh_CN translation (as of 2002-11-08): # Chih-Wei Huang , 2001. # Kenduest Lee , 2001, 2002. # Jouston Huang (Huang, Jiun-Jeng) , 2002. # Wang Jian , 2002. # Anthony Fok , 2002. # Yuan-Chen Cheng , 2002. # Frank Weng (a.k.a. Franklin) , 2006. msgid "" msgstr "" "Project-Id-Version: tdeio\n" "POT-Creation-Date: 2020-12-06 19:22+0100\n" "PO-Revision-Date: 2006-09-05 10:10+0800\n" "Last-Translator: Frank Weng (a.k.a. Franklin) \n" "Language-Team: Chinese Traditional \n" "Language: \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 1.11.4\n" #. Instead of a literal translation, add your name to the end of the list (separated by a comma). msgid "" "_: NAME OF TRANSLATORS\n" "Your names" msgstr "" "Eric Cheng,Chih-Wei Huang,Kenduest Lee,Jouston Huang (Huang, Jiun-Jeng),Wang " "Jian,Anthony Fok ,Yuan-Chen Cheng" #. Instead of a literal translation, add your email to the end of the list (separated by a comma). msgid "" "_: EMAIL OF TRANSLATORS\n" "Your emails" msgstr "" ",,," ",,," "" #: bookmarks/kbookmark.cpp:115 msgid "Create New Bookmark Folder" msgstr "建立新書籤資料夾" #: bookmarks/kbookmark.cpp:116 #, c-format msgid "Create New Bookmark Folder in %1" msgstr "建立新書籤資料夾於 %1" #: bookmarks/kbookmark.cpp:118 msgid "New folder:" msgstr "新資料夾:" #: bookmarks/kbookmark.cpp:284 msgid "--- separator ---" msgstr "--- 分隔符號 ---" #: bookmarks/kbookmarkimporter_ns.cpp:108 #: bookmarks/kbookmarkimporter_ns.cpp:111 msgid "*.html|HTML Files (*.html)" msgstr "*.html|HTML 檔案 (*.html)" #: bookmarks/kbookmarkimporter_ns.cpp:195 msgid "" msgstr "" #: bookmarks/kbookmarkimporter_opera.cpp:108 #: bookmarks/kbookmarkimporter_opera.cpp:111 msgid "*.adr|Opera Bookmark Files (*.adr)" msgstr "*.adr|Opera 書籤檔案 (*.adr)" #: bookmarks/kbookmarkmanager.cpp:369 msgid "" "Unable to save bookmarks in %1. Reported error was: %2. This error message " "will only be shown once. The cause of the error needs to be fixed as quickly " "as possible, which is most likely a full hard drive." msgstr "" "無法儲存書籤於 %1。回報的錯誤為： %2。這個錯誤訊息將只會顯示一次。造成錯誤的" "原因需要盡速修正，大多數的情況可能是硬碟已經滿了。" #: bookmarks/kbookmarkmanager.cpp:510 bookmarks/kbookmarkmenu.cpp:341 msgid "Cannot add bookmark with empty URL." msgstr "無法新增一個空的 URL 書籤。" #: bookmarks/kbookmarkmenu.cpp:257 msgid "Add Bookmark Here" msgstr "加入書籤於此" #: bookmarks/kbookmarkmenu.cpp:274 msgid "Open Folder in Bookmark Editor" msgstr "在書籤編輯器中開啟資料夾" #: bookmarks/kbookmarkmenu.cpp:277 msgid "Delete Folder" msgstr "刪除資料夾" #: bookmarks/kbookmarkmenu.cpp:285 msgid "Copy Link Address" msgstr "複製連結位址" #: bookmarks/kbookmarkmenu.cpp:288 msgid "Delete Bookmark" msgstr "刪除書籤" #: bookmarks/kbookmarkmenu.cpp:316 msgid "Bookmark Properties" msgstr "書籤屬性" #: bookmarks/kbookmarkmenu.cpp:379 msgid "" "Are you sure you wish to remove the bookmark folder\n" "\"%1\"?" msgstr "" "您確定希望移除書籤資料夾\n" "「%1」？" #: bookmarks/kbookmarkmenu.cpp:380 msgid "" "Are you sure you wish to remove the bookmark\n" "\"%1\"?" msgstr "" "您確定希望移除書籤\n" "「%1」？" #: bookmarks/kbookmarkmenu.cpp:381 msgid "Bookmark Folder Deletion" msgstr "書籤資料夾刪除" #: bookmarks/kbookmarkmenu.cpp:382 msgid "Bookmark Deletion" msgstr "書籤刪除" #: bookmarks/kbookmarkmenu.cpp:484 msgid "Bookmark Tabs as Folder..." msgstr "書籤分頁成為資料夾..." #: bookmarks/kbookmarkmenu.cpp:493 msgid "Add a folder of bookmarks for all open tabs." msgstr "把所有開啟的分頁加入成為書籤的資料夾。" #: bookmarks/kbookmarkmenu.cpp:504 bookmarks/kbookmarkmenu_p.h:144 msgid "Add Bookmark" msgstr "加入書籤" #: bookmarks/kbookmarkmenu.cpp:513 msgid "Add a bookmark for the current document" msgstr "將目前文件加入書籤內" #: bookmarks/kbookmarkmenu.cpp:527 msgid "Edit your bookmark collection in a separate window" msgstr "在另外的視窗編輯書籤內容" #: bookmarks/kbookmarkmenu.cpp:536 msgid "&New Bookmark Folder..." msgstr "新書籤資料夾(&N)..." #: bookmarks/kbookmarkmenu.cpp:548 msgid "Create a new bookmark folder in this menu" msgstr "在該選單內建立新書籤資料夾" #: bookmarks/kbookmarkmenu.cpp:682 msgid "Quick Actions" msgstr "快速動作" #: ../tdeioslave/http/kcookiejar/kcookiewin.cpp:270 #: bookmarks/kbookmarkmenu.cpp:789 tdefile/kpropertiesdialog.cpp:4011 #: tdeio/tdefileitem.cpp:948 msgid "Name:" msgstr "名稱：" #: bookmarks/kbookmarkmenu.cpp:795 tdefile/kpropertiesdialog.cpp:992 #: tdefile/kurlrequesterdlg.cpp:47 msgid "Location:" msgstr "位置：" #: bookmarks/kbookmarkmenu.cpp:827 tdefile/kpropertiesdialog.cpp:3297 msgid "&Add" msgstr "新增(&A)" #: bookmarks/kbookmarkmenu.cpp:829 msgid "&New Folder..." msgstr "新增資料夾(&N)..." #: bookmarks/kbookmarkmenu.cpp:946 msgid "Bookmark" msgstr "書籤" #: bookmarks/kbookmarkmenu.cpp:1113 msgid "Netscape Bookmarks" msgstr "Netscape 書籤" #: httpfilter/httpfilter.cpp:278 msgid "Unexpected end of data, some information may be lost." msgstr "未預期的資料結尾，某些資訊可能遺失。" #: httpfilter/httpfilter.cpp:335 msgid "Receiving corrupt data." msgstr "接收到損毀的資料。" #: ../tdeioslave/http/http.cpp:5191 kpasswdserver/kpasswdserver.cpp:346 msgid " Do you want to retry?" msgstr " 您要重試嗎？" #: ../tdeioslave/http/http.cpp:5192 kpasswdserver/kpasswdserver.cpp:348 msgid "Authentication" msgstr "認證" #: kpasswdserver/kpasswdserver.cpp:348 msgid "Retry" msgstr "重試" #: kpasswdserver/kpasswdserver.cpp:371 tdeio/passdlg.cpp:345 msgid "Authorization Dialog" msgstr "授權對話方塊" #: kssl/ksslcertdlg.cpp:61 msgid "Certificate" msgstr "憑證" #: kssl/ksslcertdlg.cpp:67 msgid "Save selection for this host." msgstr "儲存對這個主機的選擇。" #: kssl/ksslcertdlg.cpp:75 msgid "Send certificate" msgstr "送出憑證" #: kssl/ksslcertdlg.cpp:79 msgid "Do not send a certificate" msgstr "不送出憑證" #: kssl/ksslcertdlg.cpp:84 msgid "TDE SSL Certificate Dialog" msgstr "TDE SSL 憑證認證對話方塊" #: kssl/ksslcertdlg.cpp:139 msgid "" "The server %1 requests a certificate.

Select a certificate to use " "from the list below:" msgstr "伺服器 %1 要求憑證。

請從底下的清單中選擇要使用的憑證：" #: kssl/ksslcertificate.cpp:232 msgid "Signature Algorithm: " msgstr "簽名演算法:" #: kssl/ksslcertificate.cpp:233 msgid "Unknown" msgstr "未知" #: kssl/ksslcertificate.cpp:236 msgid "Signature Contents:" msgstr "簽名內容:" #: kssl/ksslcertificate.cpp:368 msgid "" "_: Unknown\n" "Unknown key algorithm" msgstr "未知的密碼匙演算法" #: kssl/ksslcertificate.cpp:371 msgid "Key type: RSA (%1 bit)" msgstr "密碼匙類型: RSA (%1 bit)" #: kssl/ksslcertificate.cpp:378 msgid "Modulus: " msgstr "模組: " #: kssl/ksslcertificate.cpp:391 msgid "Exponent: 0x" msgstr "指數: 0x" #: kssl/ksslcertificate.cpp:397 msgid "Key type: DSA (%1 bit)" msgstr "密碼匙類型: DSA (%1 bit)" #: kssl/ksslcertificate.cpp:408 msgid "Prime: " msgstr "質數: " #: kssl/ksslcertificate.cpp:422 msgid "160 bit prime factor: " msgstr "160 bit 質因數: " #: kssl/ksslcertificate.cpp:446 msgid "Public key: " msgstr "公開金鑰:" #: kssl/ksslcertificate.cpp:990 msgid "The certificate is valid." msgstr "憑證是合法的。" #: kssl/ksslcertificate.cpp:994 msgid "" "Certificate signing authority root files could not be found so the " "certificate is not verified." msgstr "憑證簽名授權 root 檔無法找到，所以無法驗證憑證。" #: kssl/ksslcertificate.cpp:997 msgid "Certificate signing authority is unknown or invalid." msgstr "憑證簽名授權是未知的或非法的。" #: kssl/ksslcertificate.cpp:999 msgid "Certificate is self-signed and thus may not be trustworthy." msgstr "憑證是自我簽名的，因此也許不可信賴。" #: kssl/ksslcertificate.cpp:1001 msgid "Certificate has expired." msgstr "認證已經過期。" #: kssl/ksslcertificate.cpp:1003 msgid "Certificate has been revoked." msgstr "認證已經被撤回。" #: kssl/ksslcertificate.cpp:1005 msgid "SSL support was not found." msgstr "無法找到 SSL 支援。" #: kssl/ksslcertificate.cpp:1007 msgid "Signature is untrusted." msgstr "簽名不被信任。" #: kssl/ksslcertificate.cpp:1009 msgid "Signature test failed." msgstr "簽名測試失敗。" #: kssl/ksslcertificate.cpp:1012 msgid "Rejected, possibly due to an invalid purpose." msgstr "拒絕，可能由於是不合法的意圖" #: kssl/ksslcertificate.cpp:1014 msgid "Private key test failed." msgstr "私人密碼匙測試失敗。" #: kssl/ksslcertificate.cpp:1016 msgid "The certificate has not been issued for this host." msgstr "此認證並非由這個主機所發佈的。" #: kssl/ksslcertificate.cpp:1018 msgid "This certificate is not relevant." msgstr "這個憑證是不相關的。" #: kssl/ksslcertificate.cpp:1023 msgid "The certificate is invalid." msgstr "憑證是非法的。" #: kssl/ksslinfodlg.cpp:92 kssl/ksslinfodlg.cpp:149 msgid "Current connection is secured with SSL." msgstr "目前連線使用 SSL 安全機制。" #: kssl/ksslinfodlg.cpp:95 kssl/ksslinfodlg.cpp:152 msgid "Current connection is not secured with SSL." msgstr "目前連線沒有使用 SSL 安全機制。" #: kssl/ksslinfodlg.cpp:99 msgid "SSL support is not available in this build of TDE." msgstr "SSL 支援在這個版本的 TDE 不可獲得。" #: kssl/ksslinfodlg.cpp:109 msgid "C&ryptography Configuration..." msgstr "加密設定..." #: kssl/ksslinfodlg.cpp:120 kssl/ksslkeygen.cpp:93 msgid "TDE SSL Information" msgstr "TDE SSL 資訊" #: kssl/ksslinfodlg.cpp:142 msgid "" "The main part of this document is secured with SSL, but some parts are not." msgstr "該文件內的主要部份是使用 SSL 連線，但是有些部份則不是。" #: kssl/ksslinfodlg.cpp:144 msgid "Some of this document is secured with SSL, but the main part is not." msgstr "該文件內的一部份有是使用 SSL 連線，但是絕大部份都不是。" #: kssl/ksslinfodlg.cpp:184 msgid "Chain:" msgstr "信任鏈:" #: kssl/ksslinfodlg.cpp:193 msgid "0 - Site Certificate" msgstr "0 - 站台認證憑證" #: kssl/ksslinfodlg.cpp:210 msgid "Peer certificate:" msgstr "對等憑證:" #: kssl/ksslinfodlg.cpp:212 msgid "Issuer:" msgstr "配發者:" #: kssl/ksslinfodlg.cpp:218 msgid "IP address:" msgstr "IP 位址:" #: kssl/ksslinfodlg.cpp:227 tdefile/kpropertiesdialog.cpp:2613 msgid "URL:" msgstr "URL：" #: kssl/ksslinfodlg.cpp:230 msgid "Certificate state:" msgstr "憑證狀態:" #: kssl/ksslinfodlg.cpp:236 msgid "Valid from:" msgstr "有效期自:" #: kssl/ksslinfodlg.cpp:238 msgid "Valid until:" msgstr "有效期到:" #: kssl/ksslinfodlg.cpp:241 msgid "Serial number:" msgstr "序號:" #: kssl/ksslinfodlg.cpp:243 msgid "MD5 digest:" msgstr "MD5 摘要:" #: kssl/ksslinfodlg.cpp:246 msgid "Cipher in use:" msgstr "使用的加密編碼:" #: kssl/ksslinfodlg.cpp:248 msgid "Details:" msgstr "詳細資料：" #: kssl/ksslinfodlg.cpp:250 msgid "SSL version:" msgstr "SSL 版本:" #: kssl/ksslinfodlg.cpp:252 msgid "Cipher strength:" msgstr "加密編碼強度:" #: kssl/ksslinfodlg.cpp:253 msgid "%1 bits used of a %2 bit cipher" msgstr "使用了 %2 位元加密算法的 %1 位元" #: kssl/ksslinfodlg.cpp:409 msgid "Organization:" msgstr "組織:" #: kssl/ksslinfodlg.cpp:414 msgid "Organizational unit:" msgstr "組織單位:" #: kssl/ksslinfodlg.cpp:419 msgid "Locality:" msgstr "位置:" #: kssl/ksslinfodlg.cpp:424 msgid "" "_: Federal State\n" "State:" msgstr "狀態:" #: kssl/ksslinfodlg.cpp:429 msgid "Country:" msgstr "國家:" #: kssl/ksslinfodlg.cpp:434 msgid "Common name:" msgstr "一般名稱:" #: kssl/ksslinfodlg.cpp:439 msgid "Email:" msgstr "電子郵件:" #: kssl/ksslkeygen.cpp:48 msgid "TDE Certificate Request" msgstr "TDE 認證請求" #: kssl/ksslkeygen.cpp:50 msgid "TDE Certificate Request - Password" msgstr "TDE 認證請求 - 密碼" #: kssl/ksslkeygen.cpp:93 msgid "Unsupported key size." msgstr "不支援的金鑰大小。" #: kssl/ksslkeygen.cpp:97 misc/uiserver.cpp:1382 msgid "TDE" msgstr "TDE" #: kssl/ksslkeygen.cpp:97 msgid "Please wait while the encryption keys are generated..." msgstr "請稍候， 正在產生加密金鑰..." #: kssl/ksslkeygen.cpp:107 msgid "Do you wish to store the passphrase in your wallet file?" msgstr "您希望將密語儲存在您的錢包檔案中嗎？" #: kssl/ksslkeygen.cpp:107 msgid "Store" msgstr "儲存" #: kssl/ksslkeygen.cpp:107 msgid "Do Not Store" msgstr "不要儲存" #: kssl/ksslkeygen.cpp:210 msgid "2048 (High Grade)" msgstr "2048 (高階)" #: kssl/ksslkeygen.cpp:211 msgid "1024 (Medium Grade)" msgstr "1024 (中階)" #: kssl/ksslkeygen.cpp:212 msgid "768 (Low Grade)" msgstr "768 (低階)" #: kssl/ksslkeygen.cpp:213 msgid "512 (Low Grade)" msgstr "512 (低階)" #: kssl/ksslkeygen.cpp:215 msgid "No SSL support." msgstr "不支援 SSL。" #: kssl/ksslpemcallback.cpp:36 msgid "Certificate password" msgstr "憑證密碼" #: kssl/ksslutils.cpp:88 msgid "GMT" msgstr "GMT" #: misc/kpac/discovery.cpp:116 msgid "Could not find a usable proxy configuration script" msgstr "無法找到可用的代理伺服器組態命令稿" #: misc/kpac/downloader.cpp:81 #, c-format msgid "" "Could not download the proxy configuration script:\n" "%1" msgstr "" "無法下載代理伺服器組態命令稿：\n" "%1" #: misc/kpac/downloader.cpp:83 msgid "Could not download the proxy configuration script" msgstr "無法下載代理伺服器組態命令稿" #: misc/kpac/proxyscout.cpp:124 #, c-format msgid "" "The proxy configuration script is invalid:\n" "%1" msgstr "" "代理伺服器組態命令稿無效：\n" "%1" #: misc/kpac/proxyscout.cpp:184 #, c-format msgid "" "The proxy configuration script returned an error:\n" "%1" msgstr "" "代理伺服器組態命令稿傳回一個錯誤：\n" "%1" #: misc/tdefile/fileprops.cpp:200 msgid "Do not print the mimetype of the given file(s)" msgstr "不要顯示指定檔案的 MIME 類型" #: misc/tdefile/fileprops.cpp:204 msgid "" "List all supported metadata keys of the given file(s). If mimetype is not " "specified, the mimetype of the given files is used." msgstr "" "列出指定檔案所有支援的中繼資料鍵值。如果沒有指定 mime 類型，會使用指定檔案的 " "mime 類型。" #: misc/tdefile/fileprops.cpp:210 msgid "" "List all preferred metadata keys of the given file(s). If mimetype is not " "specified, the mimetype of the given files is used." msgstr "" "列出指定檔案所有偏好的中繼資料鍵值。如果沒有指定 mime 類型，會使用指定檔案的 " "mime 類型。" #: misc/tdefile/fileprops.cpp:216 msgid "List all metadata keys which have a value in the given file(s)." msgstr "列出指定檔案所有具有數值的中繼資料鍵值。" #: misc/tdefile/fileprops.cpp:221 msgid "Prints all mimetypes for which metadata support is available." msgstr "列出所有可支援中繼資料的 mime 類型。" #: misc/tdefile/fileprops.cpp:226 msgid "" "Do not print a warning when more than one file was given and they do not all " "have the same mimetype." msgstr "當指定超過一個以上的檔案而他們並沒有相同的 mime 類型時不要顯示警示。" #: misc/tdefile/fileprops.cpp:231 msgid "Prints all metadata values, available in the given file(s)." msgstr "列出指定檔案中可用的所有中繼資料數值。" #: misc/tdefile/fileprops.cpp:236 msgid "Prints the preferred metadata values, available in the given file(s)." msgstr "列出指定檔案中可用的偏好中繼資料數值。" #: misc/tdefile/fileprops.cpp:240 msgid "" "Opens a TDE properties dialog to allow viewing and modifying of metadata of " "the given file(s)" msgstr "開啟 TDE 屬性對話盒以便檢視並修改指定檔案的中繼資料" #: misc/tdefile/fileprops.cpp:244 msgid "" "Prints the value for 'key' of the given file(s). 'key' may also be a comma-" "separated list of keys" msgstr "列出指定檔案的「鍵」值。「鍵」值也可能是以逗號分隔的鍵值清單" #: misc/tdefile/fileprops.cpp:248 msgid "" "Attempts to set the value 'value' for the metadata key 'key' for the given " "file(s)" msgstr "嘗試設定指定檔案的中繼鍵值「key」的數值「value」" #: misc/tdefile/fileprops.cpp:251 msgid "The group to get values from or set values to" msgstr "要取得或設定數值的群組" #: misc/tdefile/fileprops.cpp:255 msgid "The file (or a number of files) to operate on." msgstr "要操作的檔案（或是檔案的數字）。" #: misc/tdefile/fileprops.cpp:270 msgid "No support for metadata extraction found." msgstr "找不到提取中繼資料的支援。" #: misc/tdefile/fileprops.cpp:275 msgid "Supported MimeTypes:" msgstr "支援的 MIME 類型:" #: misc/tdefile/fileprops.cpp:410 msgid "tdefile" msgstr "tdefile" #: misc/tdefile/fileprops.cpp:411 msgid "A commandline tool to read and modify metadata of files." msgstr "用來讀取和修改檔案中繼資料的命令列工具。" #: misc/tdefile/fileprops.cpp:438 msgid "No files specified" msgstr "沒有指定檔案" #: misc/tdefile/fileprops.cpp:467 msgid "Cannot determine metadata" msgstr "無法辨識中繼資料" #: misc/tdemailservice.cpp:32 msgid "KMailService" msgstr "KMail服務" #: misc/tdemailservice.cpp:32 msgid "Mail service" msgstr "郵件服務" #: misc/tdesendbugmail/main.cpp:22 msgid "Subject line" msgstr "主題行" #: misc/tdesendbugmail/main.cpp:23 msgid "Recipient" msgstr "收件者" #: misc/tdesendbugmail/main.cpp:33 msgid "Error connecting to server." msgstr "連線到伺服器發生錯誤。" #: misc/tdesendbugmail/main.cpp:36 msgid "Not connected." msgstr "尚未連接。" #: misc/tdesendbugmail/main.cpp:39 msgid "Connection timed out." msgstr "連線逾時。" #: misc/tdesendbugmail/main.cpp:42 msgid "Time out waiting for server interaction." msgstr "等候伺服器回應逾時。" #: misc/tdesendbugmail/main.cpp:46 msgid "Server said: \"%1\"" msgstr "伺服器回應: \"%1\"" #: misc/tdesendbugmail/main.cpp:62 msgid "KSendBugMail" msgstr "KSendBugMail" #: misc/tdesendbugmail/main.cpp:63 msgid "Sends a short bug report to submit@bugs.trinitydesktop.org" msgstr "寄一封簡短的錯誤報告到 submit@bugs.trinitydesktop.org" #: misc/tdesendbugmail/main.cpp:65 msgid "Author" msgstr "作者" #: misc/tdetelnetservice.cpp:41 msgid "telnet service" msgstr "遠端登入服務" #: misc/tdetelnetservice.cpp:42 msgid "telnet protocol handler" msgstr "遠端登入協定處理器" #: misc/tdetelnetservice.cpp:76 msgid "You do not have permission to access the %1 protocol." msgstr "您可能沒有權限存取 %1 通訊協定。" #: misc/tdewalletd/tdewalletd.cpp:438 msgid "" "TDE has requested to open the wallet '%1'. Please enter the " "password for this wallet below." msgstr "TDE 被要求開啟錢包「%1」。請在下面輸入這個錢包的密碼。" #: misc/tdewalletd/tdewalletd.cpp:440 msgid "" "The application '%1' has requested to open the wallet '%2'. Please enter the password for this wallet below." msgstr "" "應用程式「%1」要求開啟錢包「%2」。請在下面輸入這個錢包的密" "碼。" #: misc/tdewalletd/tdewalletd.cpp:443 misc/tdewalletd/tdewalletd.cpp:457 #: tdefile/tdefiledialog.cpp:1840 msgid "&Open" msgstr "開啟(&O)" #: misc/tdewalletd/tdewalletd.cpp:452 msgid "" "TDE has requested to open the wallet. This is used to store sensitive data " "in a secure fashion. Please enter a password to use with this wallet or " "click cancel to deny the application's request." msgstr "" "TDE 被要求開啟錢包。這是一種很安全的儲存敏感資料的方式。請輸入密碼來使用這個" "錢包或者按取消來拒絕應用程式的要求。" #: misc/tdewalletd/tdewalletd.cpp:454 msgid "" "The application '%1' has requested to open the TDE wallet. This " "is used to store sensitive data in a secure fashion. Please enter a password " "to use with this wallet or click cancel to deny the application's request." msgstr "" "應用程式「%1」要求開啟 TDE 錢包。這是一種很安全的儲存敏感資料的方" "式。請輸入密碼來使用這個錢包或者按取消來拒絕應用程式的要求。" #: misc/tdewalletd/tdewalletd.cpp:461 msgid "" "TDE has requested to create a new wallet named '%1'. Please " "choose a password for this wallet, or cancel to deny the application's " "request." msgstr "" "TDE 被要求建立一個新的名為「%1」的錢包。請選擇給這個錢包使用的密" "碼，或者按取消來拒絕應用程式的要求。" #: misc/tdewalletd/tdewalletd.cpp:463 msgid "" "The application '%1' has requested to create a new wallet named " "'%2'. Please choose a password for this wallet, or cancel to deny the " "application's request." msgstr "" "應用程式「%1」要求建立一個新的名為「%2」的錢包。請選擇給這" "個錢包使用的密碼，或者按取消來拒絕應用程式的要求。" #: misc/tdewalletd/tdewalletd.cpp:466 msgid "C&reate" msgstr "建立(&R)" #: misc/tdewalletd/tdewalletd.cpp:470 misc/tdewalletd/tdewalletd.cpp:651 #: misc/tdewalletd/tdewalletd.cpp:667 misc/tdewalletd/tdewalletd.cpp:678 #: misc/tdewalletd/tdewalletd.cpp:683 misc/tdewalletd/tdewalletd.cpp:1243 msgid "TDE Wallet Service" msgstr "TDE 錢包服務" #: misc/tdewalletd/tdewalletd.cpp:487 msgid "" "Error opening the wallet '%1'. Please try again.
(Error code " "%2: %3)" msgstr "" "在開啟錢包「%1」時發生錯誤。請再試一次。
(錯誤代碼 %2: %3)" #: misc/tdewalletd/tdewalletd.cpp:562 msgid "TDE has requested access to the open wallet '%1'." msgstr "TDE 被要求存取開啟的錢包「%1」。" #: misc/tdewalletd/tdewalletd.cpp:564 msgid "" "The application '%1' has requested access to the open wallet '" "%2'." msgstr "應用程式「%1」要求存取開啟的錢包「%2」。" #: misc/tdewalletd/tdewalletd.cpp:651 msgid "" "Unable to open wallet. The wallet must be opened in order to change the " "password." msgstr "無法開啟錢包。必須開啟這個錢包才能夠改變密碼。" #: misc/tdewalletd/tdewalletd.cpp:666 msgid "Please choose a new password for the wallet '%1'." msgstr "請選擇一個新的密碼給錢包「%1」。" #: misc/tdewalletd/tdewalletd.cpp:678 msgid "Error re-encrypting the wallet. Password was not changed." msgstr "重新加密錢包時發生錯誤。密碼尚未變更。" #: misc/tdewalletd/tdewalletd.cpp:683 msgid "Error reopening the wallet. Data may be lost." msgstr "重開錢包發生錯誤。資料可能流失。" #: misc/tdewalletd/tdewalletd.cpp:1243 msgid "" "There have been repeated failed attempts to gain access to a wallet. An " "application may be misbehaving." msgstr "嘗試取得錢包的存取權發生重複的錯誤。此應用程式可能有問題。" #: misc/tdewalletd/tdewalletwizard.ui.h:23 msgid "Password is empty. (WARNING: Insecure)" msgstr "密碼是空的。 (警告：不安全)" #: misc/tdewalletd/tdewalletwizard.ui.h:25 msgid "Passwords match." msgstr "密碼相符。" #: misc/tdewalletd/tdewalletwizard.ui.h:28 msgid "Passwords do not match." msgstr "密碼不符。" #: misc/uiserver.cpp:97 misc/uiserver.cpp:602 misc/uiserver.cpp:681 msgid "Settings..." msgstr "設定..." #: misc/uiserver.cpp:125 msgid "Configure Network Operation Window" msgstr "設定網路操作視窗" #: misc/uiserver.cpp:129 msgid "Show system tray icon" msgstr "系統匣圖示" #: misc/uiserver.cpp:130 msgid "Keep network operation window always open" msgstr "保持網路操作視窗永遠開啟" #: misc/uiserver.cpp:131 msgid "Show column headers" msgstr "顯示欄位標題" #: misc/uiserver.cpp:132 msgid "Show toolbar" msgstr "顯示工具列" #: misc/uiserver.cpp:133 msgid "Show statusbar" msgstr "顯示狀態列" #: misc/uiserver.cpp:134 msgid "Column widths are user adjustable" msgstr "欄位寬度是使用者可以調整的" #: misc/uiserver.cpp:135 msgid "Show information:" msgstr "顯示資訊:" #: misc/uiserver.cpp:142 misc/uiserver.cpp:473 msgid "URL" msgstr "URL" #: misc/uiserver.cpp:143 misc/uiserver.cpp:472 msgid "" "_: Remaining Time\n" "Rem. Time" msgstr "剩餘時間" #: misc/uiserver.cpp:144 misc/uiserver.cpp:471 msgid "Speed" msgstr "速度" #: misc/uiserver.cpp:145 misc/uiserver.cpp:470 tdefile/tdefiledetailview.cpp:66 msgid "Size" msgstr "大小" #: misc/uiserver.cpp:146 misc/uiserver.cpp:469 #, c-format msgid "%" msgstr "%" #: misc/uiserver.cpp:147 misc/uiserver.cpp:468 msgid "Count" msgstr "記數" #: misc/uiserver.cpp:148 misc/uiserver.cpp:467 msgid "" "_: Resume\n" "Res." msgstr "恢復" #: misc/uiserver.cpp:149 misc/uiserver.cpp:466 msgid "Local Filename" msgstr "本地檔名" #: misc/uiserver.cpp:150 misc/uiserver.cpp:465 msgid "Operation" msgstr "作業" #: misc/uiserver.cpp:253 msgid "%1 / %2" msgstr "%1 / %2" #: misc/uiserver.cpp:287 tdeio/defaultprogress.cpp:325 msgid "Stalled" msgstr "暫停" #: misc/uiserver.cpp:290 msgid "%1/s" msgstr "%1/秒" #: misc/uiserver.cpp:301 msgid "Copying" msgstr "複製中" #: misc/uiserver.cpp:310 msgid "Moving" msgstr "移動中" #: misc/uiserver.cpp:319 msgid "Creating" msgstr "建立中" #: misc/uiserver.cpp:328 msgid "Deleting" msgstr "刪除中" #: misc/uiserver.cpp:336 msgid "Loading" msgstr "載入中" #: misc/uiserver.cpp:361 msgid "Examining" msgstr "檢查中" #: misc/uiserver.cpp:369 msgid "Mounting" msgstr "裝載中" #: misc/uiserver.cpp:377 tdeio/defaultprogress.cpp:410 msgid "Unmounting" msgstr "卸載中" #: misc/uiserver.cpp:607 misc/uiserver.cpp:1096 msgid " Files: %1 " msgstr " 檔案: %1 " #: misc/uiserver.cpp:608 msgid "" "_: Remaining Size\n" " Rem. Size: %1 kB " msgstr " 剩餘大小: %1 kB " #: misc/uiserver.cpp:609 msgid "" "_: Remaining Time\n" " Rem. Time: 00:00:00 " msgstr " 剩餘時間: 00:00:00 " #: misc/uiserver.cpp:610 msgid " %1 kB/s " msgstr " %1 kB/秒 " #: misc/uiserver.cpp:631 tdeio/defaultprogress.cpp:179 msgid "Progress Dialog" msgstr "進度對話方塊" #: misc/uiserver.cpp:678 msgid "Cancel Job" msgstr "取消工作" #: misc/uiserver.cpp:1097 msgid "" "_: Remaining Size\n" " Rem. Size: %1 " msgstr " 剩餘大小: %1" #: misc/uiserver.cpp:1099 msgid "" "_: Remaining Time\n" " Rem. Time: %1 " msgstr " 剩餘時間: %1" #: misc/uiserver.cpp:1101 tdeio/statusbarprogress.cpp:134 msgid " %1/s " msgstr " %1/秒 " #: misc/uiserver.cpp:1217 tdeio/observer.cpp:332 msgid "The peer SSL certificate appears to be corrupt." msgstr "對等的 SSL 憑證可能損壞了。" #: misc/uiserver.cpp:1217 tdeio/observer.cpp:332 tdeio/tcpslavebase.cpp:706 msgid "SSL" msgstr "SSL" #: misc/uiserver.cpp:1383 msgid "TDE Progress Information UI Server" msgstr "TDE 進度資訊使用者介面伺服器" #: misc/uiserver.cpp:1386 misc/uiserver.cpp:1387 msgid "Developer" msgstr "開發人員" #: tdefile/kacleditwidget.cpp:63 tdefile/kacleditwidget.cpp:421 #: tdefile/tdefiledetailview.cpp:69 msgid "Owner" msgstr "擁有者" #: tdefile/kacleditwidget.cpp:64 tdefile/kacleditwidget.cpp:423 msgid "Owning Group" msgstr "擁有群組" #: tdefile/kacleditwidget.cpp:65 tdefile/kacleditwidget.cpp:425 #: tdefile/kpropertiesdialog.cpp:2020 msgid "Others" msgstr "其他" #: tdefile/kacleditwidget.cpp:66 tdefile/kacleditwidget.cpp:427 msgid "Mask" msgstr "遮罩" #: tdefile/kacleditwidget.cpp:67 tdefile/kacleditwidget.cpp:429 msgid "Named User" msgstr "已命名使用者" #: tdefile/kacleditwidget.cpp:68 tdefile/kacleditwidget.cpp:431 msgid "Named Group" msgstr "已命名群組" #: tdefile/kacleditwidget.cpp:81 msgid "Add Entry..." msgstr "新增項目..." #: tdefile/kacleditwidget.cpp:83 msgid "Edit Entry..." msgstr "編輯項目..." #: tdefile/kacleditwidget.cpp:85 msgid "Delete Entry" msgstr "刪除項目" #: tdefile/kacleditwidget.cpp:280 msgid " (Default)" msgstr " (預設)" #: tdefile/kacleditwidget.cpp:397 msgid "Edit ACL Entry" msgstr "編輯存取控制清單項目" #: tdefile/kacleditwidget.cpp:407 msgid "Entry Type" msgstr "項目型態" #: tdefile/kacleditwidget.cpp:410 msgid "Default for new files in this folder" msgstr "此資料夾新檔案的預設值" #: tdefile/kacleditwidget.cpp:446 msgid "User: " msgstr "使用者：" #: tdefile/kacleditwidget.cpp:450 msgid "Group: " msgstr "群組：" #: tdefile/kacleditwidget.cpp:563 msgid "Type" msgstr "類型" #: tdefile/kacleditwidget.cpp:564 tdefile/tdefiledetailview.cpp:65 msgid "Name" msgstr "名稱" #: tdefile/kacleditwidget.cpp:565 msgid "" "_: read permission\n" "r" msgstr "r" #: tdefile/kacleditwidget.cpp:566 msgid "" "_: write permission\n" "w" msgstr "w" #: tdefile/kacleditwidget.cpp:567 msgid "" "_: execute permission\n" "x" msgstr "x" #: tdefile/kacleditwidget.cpp:568 msgid "Effective" msgstr "有效" #: tdefile/kcustommenueditor.cpp:88 msgid "Menu Editor" msgstr "選單編輯器" #: tdefile/kcustommenueditor.cpp:94 tdefile/tdediroperator.cpp:1258 msgid "Menu" msgstr "選單" #: tdefile/kcustommenueditor.cpp:98 msgid "New..." msgstr "新增..." #: tdefile/kcustommenueditor.cpp:100 msgid "Move Up" msgstr "向上移動" #: tdefile/kcustommenueditor.cpp:101 msgid "Move Down" msgstr "向下移動" #: tdefile/kdirselectdialog.cpp:90 msgid "Select Folder" msgstr "選擇資料夾" #: tdefile/kdirselectdialog.cpp:92 tdefile/kdirselectdialog.cpp:125 #: tdefile/tdediroperator.cpp:1269 msgid "New Folder..." msgstr "新增資料夾..." #: tdefile/kdirselectdialog.cpp:109 msgid "Folders" msgstr "資料夾" #: tdefile/kdirselectdialog.cpp:128 msgid "Show Hidden Folders" msgstr "顯示隱藏的資料夾" #: tdefile/kdirselectdialog.cpp:407 tdefile/kdirselectdialog.cpp:411 #: tdefile/tdediroperator.cpp:389 tdefile/tdediroperator.cpp:393 msgid "New Folder" msgstr "新資料夾" #: tdefile/kdirselectdialog.cpp:412 tdefile/tdediroperator.cpp:394 #, c-format msgid "" "Create new folder in:\n" "%1" msgstr "" "建立新資料夾於：\n" "%1" #: tdefile/kdirselectdialog.cpp:435 tdefile/tdediroperator.cpp:422 msgid "A file or folder named %1 already exists." msgstr "名為 %1 的檔案或資料夾已經存在。" #: tdefile/kdirselectdialog.cpp:439 tdefile/tdediroperator.cpp:426 msgid "You do not have permission to create that folder." msgstr "您沒有權限建立該資料夾。" #: tdefile/kicondialog.cpp:241 tdefile/kicondialog.cpp:250 msgid "Select Icon" msgstr "選擇圖示" #: tdefile/kicondialog.cpp:270 msgid "Icon Source" msgstr "圖示來源" #: tdefile/kicondialog.cpp:276 msgid "S&ystem icons:" msgstr "系統圖示(&Y):" #: tdefile/kicondialog.cpp:281 msgid "O&ther icons:" msgstr "其他圖示(&T)：" #: tdefile/kicondialog.cpp:283 tdefile/kpropertiesdesktopbase.ui:213 #: tdefile/kpropertiesdialog.cpp:3696 #, no-c-format msgid "&Browse..." msgstr "瀏覽(&B)..." #: tdefile/kicondialog.cpp:293 msgid "Clear Search" msgstr "清除搜尋" #: tdefile/kicondialog.cpp:297 msgid "&Search:" msgstr "搜尋(&S):" #: tdefile/kicondialog.cpp:308 msgid "Search interactively for icon names (e.g. folder)." msgstr "互動式搜尋圖示名稱（例如資料夾）。" #: tdefile/kicondialog.cpp:330 tdefile/knotifywidgetbase.ui:204 #, no-c-format msgid "Actions" msgstr "動作" #: tdefile/kicondialog.cpp:331 msgid "Animations" msgstr "動畫" #: tdefile/kicondialog.cpp:332 tdefile/kopenwith.cpp:298 msgid "Applications" msgstr "應用程式" #: tdefile/kicondialog.cpp:333 msgid "Categories" msgstr "類別" #: tdefile/kicondialog.cpp:334 msgid "Devices" msgstr "裝置" #: tdefile/kicondialog.cpp:335 msgid "Emblems" msgstr "符號" #: tdefile/kicondialog.cpp:336 msgid "Emotes" msgstr "表情" #: tdefile/kicondialog.cpp:337 msgid "Filesystems" msgstr "檔案系統" #: tdefile/kicondialog.cpp:338 msgid "International" msgstr "國際" #: tdefile/kicondialog.cpp:339 msgid "Mimetypes" msgstr "MIME 類型" #: tdefile/kicondialog.cpp:340 msgid "Places" msgstr "地方" #: tdefile/kicondialog.cpp:341 msgid "Status" msgstr "狀態" #: tdefile/kicondialog.cpp:589 msgid "*.png *.xpm *.svg *.svgz|Icon Files (*.png *.xpm *.svg *.svgz)" msgstr "*.png *.xpm *.svg *.svgz|圖示檔案 (*.png *.xpm *.svg *.svgz)" #: tdefile/kimagefilepreview.cpp:53 msgid "&Automatic preview" msgstr "自動預覽(&A)" #: tdefile/kimagefilepreview.cpp:58 msgid "&Preview" msgstr "預覽(&P)" #: tdefile/kmetaprops.cpp:130 msgid "&Meta Info" msgstr "中繼資訊(&M)" #: tdefile/knotifydialog.cpp:81 msgid "Sounds" msgstr "聲音" #: tdefile/knotifydialog.cpp:82 msgid "Logging" msgstr "記錄" #: tdefile/knotifydialog.cpp:83 msgid "Program Execution" msgstr "程式執行" #: tdefile/knotifydialog.cpp:84 msgid "Message Windows" msgstr "訊息視窗" #: tdefile/knotifydialog.cpp:85 msgid "Passive Windows" msgstr "被動視窗" #: tdefile/knotifydialog.cpp:86 msgid "Standard Error Output" msgstr "標準錯誤輸出" #: tdefile/knotifydialog.cpp:87 msgid "Taskbar" msgstr "工作列" #: tdefile/knotifydialog.cpp:121 msgid "Execute a program" msgstr "執行程式" #: tdefile/knotifydialog.cpp:122 msgid "Print to Standard error output" msgstr "列印訊息到標準錯誤輸出" #: tdefile/knotifydialog.cpp:123 msgid "Display a messagebox" msgstr "顯示訊息方塊" #: tdefile/knotifydialog.cpp:124 msgid "Log to a file" msgstr "記錄到檔案" #: tdefile/knotifydialog.cpp:125 msgid "Play a sound" msgstr "播放音效" #: tdefile/knotifydialog.cpp:126 msgid "Flash the taskbar entry" msgstr "更新工作列項目" #: tdefile/knotifydialog.cpp:163 msgid "Notification Settings" msgstr "通知設定" #: tdefile/knotifydialog.cpp:309 msgid "" "You may use the following macros
in the commandline:
%e: " "for the event name,
%a: for the name of the application that sent " "the event,
%s: for the notification message,
%w: for the " "numeric window ID where the event originated,
%i: for the numeric " "event ID." msgstr "" "您可以將下列巨集
用在命令列中：
%e：為事件名稱，
%a：為送出該事件的應用程式名稱，
%s：為通知訊息，
%w：為" "事件出現的視窗數字 ID ，
%i：為數字式的事件 ID。" #: tdefile/knotifydialog.cpp:339 msgid "Advanced <<" msgstr "進階 <<" #: tdefile/knotifydialog.cpp:340 msgid "Hide advanced options" msgstr "隱藏進階選項" #: tdefile/knotifydialog.cpp:356 msgid "Advanced >>" msgstr "進階 >>" #: tdefile/knotifydialog.cpp:357 msgid "Show advanced options" msgstr "顯示進階選項" #: tdefile/knotifydialog.cpp:782 msgid "This will cause the notifications to be reset to their defaults." msgstr "這樣將導致通知被重設為預設值。" #: tdefile/knotifydialog.cpp:784 msgid "Are You Sure?" msgstr "您確定嗎？" #: tdefile/knotifydialog.cpp:785 msgid "&Reset" msgstr "重設(&R)" #: tdefile/knotifydialog.cpp:858 msgid "Select Sound File" msgstr "選擇聲音檔" #: tdefile/knotifydialog.cpp:894 msgid "Select Log File" msgstr "選擇記錄檔" #: tdefile/knotifydialog.cpp:908 msgid "Select File to Execute" msgstr "選擇要執行的檔案" #: tdefile/knotifydialog.cpp:942 msgid "The specified file does not exist." msgstr "指定的檔案可能不存在。" #: tdefile/knotifydialog.cpp:1012 msgid "No description available" msgstr "沒有描述" #: tdefile/kopenwith.cpp:154 msgid "Known Applications" msgstr "已知的應用程式" #: tdefile/kopenwith.cpp:324 msgid "Open With" msgstr "開啟用" #: tdefile/kopenwith.cpp:328 msgid "" "Select the program that should be used to open %1. If the program " "is not listed, enter the name or click the browse button." msgstr "" "選取用來開啟 %1 的程式。如果程式不在清單中，請輸入程式名稱或按一下" "瀏覽按鈕。" #: tdefile/kopenwith.cpp:334 msgid "Choose the name of the program with which to open the selected files." msgstr "選擇用來開啟選定檔案的程式名稱。" #: tdefile/kopenwith.cpp:355 #, c-format msgid "Choose Application for %1" msgstr "為 %1 選擇應用程式" #: tdefile/kopenwith.cpp:356 msgid "" "Select the program for the file type: %1. If the program is not " "listed, enter the name or click the browse button." msgstr "" "選取開啟檔案類型 %1 使用的程式。如果要使用的程式不在清單中，請輸入" "程式名稱或按一下瀏覽按鈕。" #: tdefile/kopenwith.cpp:368 msgid "Choose Application" msgstr "選擇應用程式" #: tdefile/kopenwith.cpp:369 msgid "" "Select a program. If the program is not listed, enter the name or click " "the browse button." msgstr "" "請選擇程式。如果所需程式不在清單中，請輸入程式名稱或按一下[瀏覽]按鈕。" #: tdefile/kopenwith.cpp:408 msgid "Clear input field" msgstr "清除輸入區域" #: tdefile/kopenwith.cpp:438 msgid "" "Following the command, you can have several place holders which will be " "replaced with the actual values when the actual program is run:\n" "%f - a single file name\n" "%F - a list of files; use for applications that can open several local files " "at once\n" "%u - a single URL\n" "%U - a list of URLs\n" "%d - the directory of the file to open\n" "%D - a list of directories\n" "%i - the icon\n" "%m - the mini-icon\n" "%c - the comment" msgstr "" "下列指令，你需要在實際程式執行時換上真實的數值：\n" "%f - 單一的檔案名稱\n" "%F - 檔案的清單；用在可以一次開啟多個本地檔案的應用程式\n" "%u - 單一的網址\n" "%U - 網址的清單\n" "%d - 要開啟的檔案的目錄\n" "%D - 目錄的清單\n" "%i - 圖示\n" "%m - 小型圖示\n" "%c - 註解" #: tdefile/kopenwith.cpp:471 msgid "Run in &terminal" msgstr "於終端機執行(&T)" #: tdefile/kopenwith.cpp:482 msgid "&Do not close when command exits" msgstr "當指令存在時不要關閉(&D)" #: tdefile/kopenwith.cpp:499 msgid "&Remember application association for this type of file" msgstr "記住此類檔案的應用程式關聯(&R)" #: tdefile/kopenwith.cpp:844 tdeio/krun.cpp:221 msgid "Open with:" msgstr "開啟用：" #: tdefile/kpreviewprops.cpp:49 msgid "P&review" msgstr "預覽(&R)" #: tdefile/kpropertiesdialog.cpp:177 tdefile/kpropertiesdialog.cpp:193 #: tdefile/kpropertiesdialog.cpp:209 tdefile/kpropertiesdialog.cpp:232 #: tdefile/kpropertiesdialog.cpp:252 tdefile/kpropertiesdialog.cpp:272 #, c-format msgid "Properties for %1" msgstr "%1 的內容" #: tdefile/kpropertiesdialog.cpp:208 #, c-format msgid "" "_n: \n" "Properties for %n Selected Items" msgstr "%n 個選取項目的屬性" #: tdefile/kpropertiesdialog.cpp:748 msgid "&General" msgstr "一般(&G)" #: tdefile/kpropertiesdialog.cpp:951 tdeio/tdefileitem.cpp:949 msgid "Type:" msgstr "類型：" #: tdefile/kpropertiesdialog.cpp:968 msgid "Create new file type" msgstr "建立新檔案型態" #: tdefile/kpropertiesdialog.cpp:970 msgid "Edit file type" msgstr "編輯檔案類型" #: tdefile/kpropertiesdialog.cpp:983 msgid "Contents:" msgstr "內容：" #: tdefile/kpropertiesdialog.cpp:1001 tdeio/tdefileitem.cpp:961 msgid "Size:" msgstr "大小：" #: tdefile/kpropertiesdialog.cpp:1025 msgid "Calculate" msgstr "計算" #: tdefile/kpropertiesdialog.cpp:1036 tdefile/kpropertiesdialog.cpp:1263 msgid "Refresh" msgstr "更新" #: tdefile/kpropertiesdialog.cpp:1044 msgid "Points to:" msgstr "指向：" #: tdefile/kpropertiesdialog.cpp:1058 msgid "Created:" msgstr "建立時間：" #: tdefile/kpropertiesdialog.cpp:1069 tdeio/tdefileitem.cpp:966 msgid "Modified:" msgstr "修改時間：" #: tdefile/kpropertiesdialog.cpp:1080 msgid "Accessed:" msgstr "存取時間：" #: tdefile/kpropertiesdialog.cpp:1099 msgid "Mounted on:" msgstr "掛載點:" #: tdefile/kpropertiesdialog.cpp:1106 tdefile/kpropertiesdialog.cpp:2949 msgid "Free disk space:" msgstr "可用的磁碟空間：" #: tdefile/kpropertiesdialog.cpp:1213 tdefile/kpropertiesdialog.cpp:1228 #: tdefile/kpropertiesdialog.cpp:3109 #, no-c-format msgid "" "_: Available space out of total partition size (percent used)\n" "%1 out of %2 (%3% used)" msgstr "%1/%2 (%3% 已使用)" #: tdefile/kpropertiesdialog.cpp:1239 msgid "" "Calculating... %1 (%2)\n" "%3, %4" msgstr "" "計算中... %1 (%2)\n" "%3, %4" #: tdefile/kpropertiesdialog.cpp:1242 tdefile/kpropertiesdialog.cpp:1258 #, c-format msgid "" "_n: 1 file\n" "%n files" msgstr "%n 個檔案" #: tdefile/kpropertiesdialog.cpp:1243 tdefile/kpropertiesdialog.cpp:1259 #, c-format msgid "" "_n: 1 sub-folder\n" "%n sub-folders" msgstr "%n 個子資料夾" #: tdefile/kpropertiesdialog.cpp:1272 msgid "Calculating..." msgstr "計算中..." #: tdefile/kpropertiesdialog.cpp:1306 msgid "Stopped" msgstr "已停止" #: tdefile/kpropertiesdialog.cpp:1347 msgid "The new file name is empty." msgstr "新的檔案名稱是空的。" #: tdefile/kpropertiesdialog.cpp:1489 tdefile/kpropertiesdialog.cpp:2682 #: tdefile/kpropertiesdialog.cpp:2839 tdefile/kpropertiesdialog.cpp:3137 #: tdefile/kpropertiesdialog.cpp:3421 tdefile/kpropertiesdialog.cpp:3917 #: tdefile/kpropertiesdialog.cpp:4160 msgid "" "Could not save properties. You do not have sufficient access to write to " "%1." msgstr "無法儲存內容。您沒有足夠的存取權來寫入 %1。" #: tdefile/kpropertiesdialog.cpp:1563 tdefile/kpropertiesdialog.cpp:1567 #: tdefile/kpropertiesdialog.cpp:1572 msgid "Forbidden" msgstr "被禁止" #: tdefile/kpropertiesdialog.cpp:1564 msgid "Can Read" msgstr "可讀取" #: tdefile/kpropertiesdialog.cpp:1565 msgid "Can Read & Write" msgstr "可讀取 & 寫入" #: tdefile/kpropertiesdialog.cpp:1568 msgid "Can View Content" msgstr "可檢視內容" #: tdefile/kpropertiesdialog.cpp:1569 msgid "Can View & Modify Content" msgstr "可以檢視 & 修改內容" #: tdefile/kpropertiesdialog.cpp:1573 msgid "Can View Content & Read" msgstr "可以檢視內容 & 讀取" #: tdefile/kpropertiesdialog.cpp:1574 msgid "Can View/Read & Modify/Write" msgstr "可以檢視/讀取 & 修改/寫入" #: tdefile/kpropertiesdialog.cpp:1668 msgid "&Permissions" msgstr "權限(&P)" #: tdefile/kpropertiesdialog.cpp:1679 tdefile/kpropertiesdialog.cpp:1944 msgid "Access Permissions" msgstr "存取權限" #: tdefile/kpropertiesdialog.cpp:1690 msgid "" "_n: This file is a link and does not have permissions.\n" "All files are links and do not have permissions." msgstr "所有的檔案都是連結而沒有權限。" #: tdefile/kpropertiesdialog.cpp:1693 msgid "Only the owner can change permissions." msgstr "只有擁有者可以變更權限。" #: tdefile/kpropertiesdialog.cpp:1696 msgid "O&wner:" msgstr "擁有者(&W):" #: tdefile/kpropertiesdialog.cpp:1702 msgid "Specifies the actions that the owner is allowed to do." msgstr "指定擁有者被允許進行的動作。" #: tdefile/kpropertiesdialog.cpp:1704 msgid "Gro&up:" msgstr "群組(&U):" #: tdefile/kpropertiesdialog.cpp:1710 msgid "Specifies the actions that the members of the group are allowed to do." msgstr "指定群組的成員被允許進行的動作。" #: tdefile/kpropertiesdialog.cpp:1712 msgid "O&thers:" msgstr "其他(&T):" #: tdefile/kpropertiesdialog.cpp:1718 msgid "" "Specifies the actions that all users, who are neither owner nor in the " "group, are allowed to do." msgstr "指定所有既非擁有者也不在群組中的使用者被允許進行的動作。" #: tdefile/kpropertiesdialog.cpp:1723 msgid "Only own&er can rename and delete folder content" msgstr "只有擁有者可以重新命名與刪除資料夾內容(&E)" #: tdefile/kpropertiesdialog.cpp:1724 msgid "Is &executable" msgstr "是可執行檔(&E)" #: tdefile/kpropertiesdialog.cpp:1728 msgid "" "Enable this option to allow only the folder's owner to delete or rename the " "contained files and folders. Other users can only add new files, which " "requires the 'Modify Content' permission." msgstr "" "啟用此選項將指允許資料夾的擁有者可以刪除或重新命名包含的檔案與資料夾。其他的" "使用者只能加入新的檔案，但必須具有「編輯內容」的權限。" #: tdefile/kpropertiesdialog.cpp:1732 msgid "" "Enable this option to mark the file as executable. This only makes sense for " "programs and scripts. It is required when you want to execute them." msgstr "" "啟用此選項會將檔案標示為可執行。這只對程式與命令稿有意義。當您要執行它們的時" "候，這是必須的。" #: tdefile/kpropertiesdialog.cpp:1739 msgid "A&dvanced Permissions" msgstr "進階的權限(&D)" #: tdefile/kpropertiesdialog.cpp:1748 msgid "Ownership" msgstr "擁有權" #: tdefile/kpropertiesdialog.cpp:1757 msgid "User:" msgstr "使用者：" #: tdefile/kpropertiesdialog.cpp:1847 msgid "Group:" msgstr "群組：" #: tdefile/kpropertiesdialog.cpp:1889 msgid "Apply changes to all subfolders and their contents" msgstr "套用改變到所有的子資料夾和它們的內容" #: tdefile/kpropertiesdialog.cpp:1934 msgid "Advanced Permissions" msgstr "進階的權限" #: tdefile/kpropertiesdialog.cpp:1953 msgid "Class" msgstr "類別" #: tdefile/kpropertiesdialog.cpp:1958 msgid "" "Show\n" "Entries" msgstr "" "顯示\n" "項目" #: tdefile/kpropertiesdialog.cpp:1960 msgid "Read" msgstr "讀取" #: tdefile/kpropertiesdialog.cpp:1965 msgid "This flag allows viewing the content of the folder." msgstr "這個旗標允許檢視此資料夾的內容。" #: tdefile/kpropertiesdialog.cpp:1967 msgid "The Read flag allows viewing the content of the file." msgstr "讀取旗標允許檢視這個檔案的內容。" #: tdefile/kpropertiesdialog.cpp:1971 msgid "" "Write\n" "Entries" msgstr "" "寫入\n" "項目" #: tdefile/kpropertiesdialog.cpp:1973 msgid "Write" msgstr "寫入" #: tdefile/kpropertiesdialog.cpp:1978 msgid "" "This flag allows adding, renaming and deleting of files. Note that deleting " "and renaming can be limited using the Sticky flag." msgstr "" "這個旗標允許加入、重新命名與刪除檔案。注意刪除與重新命名可以使用相黏旗標來限" "制。" #: tdefile/kpropertiesdialog.cpp:1981 msgid "The Write flag allows modifying the content of the file." msgstr "寫入旗標允許修改這個檔案的內容。" #: tdefile/kpropertiesdialog.cpp:1986 msgid "" "_: Enter folder\n" "Enter" msgstr "進入" #: tdefile/kpropertiesdialog.cpp:1987 msgid "Enable this flag to allow entering the folder." msgstr "啟用這個旗標已允許進入此資料夾。" #: tdefile/kpropertiesdialog.cpp:1990 msgid "Exec" msgstr "執行" #: tdefile/kpropertiesdialog.cpp:1991 msgid "Enable this flag to allow executing the file as a program." msgstr "啟用這個旗標將允許這檔案像程式一樣執行。" #: tdefile/kpropertiesdialog.cpp:2001 msgid "Special" msgstr "特殊屬性" #: tdefile/kpropertiesdialog.cpp:2005 msgid "" "Special flag. Valid for the whole folder, the exact meaning of the flag can " "be seen in the right hand column." msgstr "" "特殊的旗標。對整個資料夾都有效，這個旗標精確的意思可以在右手邊的欄位看到。" #: tdefile/kpropertiesdialog.cpp:2008 msgid "" "Special flag. The exact meaning of the flag can be seen in the right hand " "column." msgstr "特殊的旗標。這個旗標精確的意思可以在右手邊的欄位看到。" #: tdefile/kpropertiesdesktopadvbase.ui:95 tdefile/kpropertiesdialog.cpp:2012 #, no-c-format msgid "User" msgstr "使用者" #: tdefile/kpropertiesdialog.cpp:2016 tdefile/tdefiledetailview.cpp:70 msgid "Group" msgstr "群組" #: tdefile/kpropertiesdialog.cpp:2024 msgid "Set UID" msgstr "SUID" #: tdefile/kpropertiesdialog.cpp:2028 msgid "" "If this flag is set, the owner of this folder will be the owner of all new " "files." msgstr "如果設定這個旗標，此資料夾的擁有者將會成為所有新檔案的擁有者。" #: tdefile/kpropertiesdialog.cpp:2031 msgid "" "If this file is an executable and the flag is set, it will be executed with " "the permissions of the owner." msgstr "如果這個檔案是可執行檔並且設定這個旗標，它將會以擁有者的權限執行。" #: tdefile/kpropertiesdialog.cpp:2035 msgid "Set GID" msgstr "SGID" #: tdefile/kpropertiesdialog.cpp:2039 msgid "" "If this flag is set, the group of this folder will be set for all new files." msgstr "如果設定這個旗標，此資料夾的群組將會設定到所有新檔案。" #: tdefile/kpropertiesdialog.cpp:2042 msgid "" "If this file is an executable and the flag is set, it will be executed with " "the permissions of the group." msgstr "如果這個檔案是可執行檔並且設定這個旗標，它將會以群組的權限執行。" #: tdefile/kpropertiesdialog.cpp:2046 msgid "" "_: File permission\n" "Sticky" msgstr "相黏" #: tdefile/kpropertiesdialog.cpp:2050 msgid "" "If the Sticky flag is set on a folder, only the owner and root can delete or " "rename files. Otherwise everybody with write permissions can do this." msgstr "" "如果在資料夾上設定相黏旗標，只有擁有者和 root 可以刪除或重新命名檔案。否則任" "何具有寫入權限的人都可以進行此項動作。" #: tdefile/kpropertiesdialog.cpp:2054 msgid "" "The Sticky flag on a file is ignored on Linux, but may be used on some " "systems" msgstr "在檔案上的相黏旗標會被 Linux 忽略，但是可能會被某些系統使用" #: tdefile/kpropertiesdialog.cpp:2241 msgid "Link" msgstr "連結" #: tdefile/kpropertiesdialog.cpp:2257 msgid "Varying (No Change)" msgstr "變化（沒有改變）" #: tdefile/kpropertiesdialog.cpp:2356 msgid "" "_n: This file uses advanced permissions\n" "These files use advanced permissions." msgstr "這些檔案使用進階的權限。" #: tdefile/kpropertiesdialog.cpp:2377 msgid "" "_n: This folder uses advanced permissions.\n" "These folders use advanced permissions." msgstr "這些資料夾使用進階的權限。" #: tdefile/kpropertiesdialog.cpp:2392 msgid "These files use advanced permissions." msgstr "這些檔案使用進階的權限。" #: tdefile/kpropertiesdialog.cpp:2608 msgid "U&RL" msgstr "URL(&R)" #: tdefile/kpropertiesdialog.cpp:2726 msgid "A&ssociation" msgstr "關聯(&S)" #: tdefile/kpropertiesdialog.cpp:2735 msgid "Pattern ( example: *.html;*.htm )" msgstr "型樣 ( 範例: *.html;*.htm )" #: tdefile/kpropertiesdialog.cpp:2747 tdeio/kmimetypechooser.cpp:75 msgid "Mime Type" msgstr "MIME 類型" #: tdefile/kpropertiesdialog.cpp:2758 tdeio/kmimetypechooser.cpp:80 msgid "Comment" msgstr "備註" #: tdefile/kpropertiesdialog.cpp:2768 msgid "Left click previews" msgstr "按左鍵預覽" #: tdefile/kpropertiesdialog.cpp:2887 msgid "De&vice" msgstr "裝置(&V)" #: tdefile/kpropertiesdialog.cpp:2917 msgid "Device (/dev/fd0):" msgstr "裝置 (/dev/fd0)：" #: tdefile/kpropertiesdialog.cpp:2918 msgid "Device:" msgstr "裝置：" #: tdefile/kpropertiesdialog.cpp:2928 msgid "Read only" msgstr "唯讀" #: tdefile/kpropertiesdialog.cpp:2932 msgid "File system:" msgstr "檔案系統:" #: tdefile/kpropertiesdialog.cpp:2940 msgid "Mount point (/mnt/floppy):" msgstr "裝載點 (/mnt/floppy)：" #: tdefile/kpropertiesdialog.cpp:2941 msgid "Mount point:" msgstr "裝載點：" #: tdefile/kpropertiesdialog.cpp:2972 msgid "Unmounted Icon" msgstr "已卸載裝置圖示" #: tdefile/kpropertiesdialog.cpp:3169 tdefile/kpropertiesdialog.cpp:3977 msgid "&Application" msgstr "應用程式(&A)" #: tdefile/kpropertiesdialog.cpp:3294 #, c-format msgid "Add File Type for %1" msgstr "加入 %1 的檔案類型" #: tdefile/kpropertiesdialog.cpp:3298 tdefile/kpropertiesdialog.cpp:3299 msgid "" "Add the selected file types to\n" "the list of supported file types." msgstr "" "將選擇的檔案類型加入到\n" "支援的檔案類型列表。" #: tdefile/kpropertiesdialog.cpp:3493 tdefile/kpropertiesdialog.cpp:3949 msgid "Only executables on local file systems are supported." msgstr "只支援本地檔案系統的執行檔。" #: tdefile/kpropertiesdialog.cpp:3505 #, c-format msgid "Advanced Options for %1" msgstr "%1 的進階選項" #: tdefile/kpropertiesdialog.cpp:3664 msgid "E&xecute" msgstr "執行(&X)" #: tdefile/kpropertiesdialog.cpp:3671 msgid "Comman&d:" msgstr "命令(&D)：" #: tdefile/kpropertiesdialog.cpp:3680 msgid "" "Following the command, you can have several place holders which will be " "replaced with the actual values when the actual program is run:\n" "%f - a single file name\n" "%F - a list of files; use for applications that can open several local files " "at once\n" "%u - a single URL\n" "%U - a list of URLs\n" "%d - the folder of the file to open\n" "%D - a list of folders\n" "%i - the icon\n" "%m - the mini-icon\n" "%c - the caption" msgstr "" "下列指令，你需要在實際程式執行時換上真實的數值：\n" "%f - 單一的檔案名稱\n" "%F - 檔案的清單；用在可以一次開啟多個本地檔案的應用程式\n" "%u - 單一的網址\n" "%U - 網址的清單\n" "%d - 要開啟的檔案的目錄\n" "%D - 目錄的清單\n" "%i - 圖示\n" "%m - 小型圖示\n" "%c - 說明" #: tdefile/kpropertiesdialog.cpp:3701 msgid "Panel Embedding" msgstr "嵌入面板" #: tdefile/kpropertiesdialog.cpp:3710 msgid "&Execute on click:" msgstr "按下後執行(&E)：" #: tdefile/kpropertiesdialog.cpp:3718 msgid "&Window title:" msgstr "視窗標題(&W)：" #: tdefile/kpropertiesdesktopadvbase.ui:55 tdefile/kpropertiesdialog.cpp:3738 #, no-c-format msgid "&Run in terminal" msgstr "在終端機執行(&R)" #: tdefile/kpropertiesdesktopadvbase.ui:77 tdefile/kpropertiesdialog.cpp:3753 #, no-c-format msgid "Do not &close when command exits" msgstr "當指令結束時不要關閉(&C)" #: tdefile/kpropertiesdesktopadvbase.ui:66 tdefile/kpropertiesdialog.cpp:3757 #, no-c-format msgid "&Terminal options:" msgstr "終端機選項(&T)：" #: tdefile/kpropertiesdesktopadvbase.ui:106 tdefile/kpropertiesdialog.cpp:3777 #, no-c-format msgid "Ru&n as a different user" msgstr "以不同使用者身份執行(&N)" #: tdefile/kpropertiesdesktopadvbase.ui:134 tdefile/kpropertiesdialog.cpp:3780 #: tdeio/passdlg.cpp:108 #, no-c-format msgid "&Username:" msgstr "使用者名稱(&U):" #: tdefile/kpropertiesdialog.cpp:4018 msgid "Description:" msgstr "描述：" #: tdefile/kpropertiesdialog.cpp:4024 msgid "Comment:" msgstr "備註：" #: tdefile/kpropertiesdialog.cpp:4030 msgid "File types:" msgstr "檔案類型：" #: tdefile/kurlbar.cpp:352 msgid "" "The Quick Access panel provides easy access to commonly used file " "locations.

Clicking on one of the shortcut entries will take you to that " "location.

By right clicking on an entry you can add, edit and remove " "shortcuts." msgstr "" "快速存取面板提供對常使用檔案位置的簡易存取方式。

按下捷徑項目之" "一會把您帶到該位置。

在項目上按右鍵則可以加入、編輯和移除捷徑。" #: tdefile/kurlbar.cpp:736 msgid "&Large Icons" msgstr "大圖示(&L)" #: tdefile/kurlbar.cpp:736 msgid "&Small Icons" msgstr "小圖示(&S)" #: tdefile/kurlbar.cpp:742 msgid "&Edit Entry..." msgstr "編輯項目(&E)..." #: tdefile/kurlbar.cpp:746 msgid "&Add Entry..." msgstr "新增項目(&A)..." #: tdefile/kurlbar.cpp:750 msgid "&Remove Entry" msgstr "移除項目(&R)" #: tdefile/kurlbar.cpp:782 msgid "Enter a description" msgstr "輸入描述" #: tdefile/kurlbar.cpp:928 msgid "Edit Quick Access Entry" msgstr "編輯快速存取項目" #: tdefile/kurlbar.cpp:931 msgid "" "Please provide a description, URL and icon for this Quick Access " "entry.
" msgstr "請為此快速存取項目提供描述、URL 和圖示。" #: tdefile/kurlbar.cpp:938 msgid "" "This is the text that will appear in the Quick Access panel.

The " "description should consist of one or two words that will help you remember " "what this entry refers to." msgstr "" "這是會顯示在快速存取面板中的文字。

此描述應該是一或兩個字的組合以協助您" "記得這個項目參考到何處。" #: tdefile/kpropertiesdesktopbase.ui:125 tdefile/kurlbar.cpp:941 #, no-c-format msgid "&Description:" msgstr "描述(&D)：" #: tdefile/kurlbar.cpp:948 #, fuzzy msgid "" "This is the location associated with the entry. Any valid URL may be " "used. For example:

%1
http://www.trinitydesktop.org

By clicking on " "the button next to the text edit box you can browse to an appropriate URL." msgstr "" "這是此項目所關聯的位置。可以使用任何有效的網址。例如：

%1
http://" "www.kde.org
ftp://ftp.kde.org/pub/kde/stable

按下文字編輯方塊旁邊的按鈕" "可以讓您瀏覽合適的網址。" #: tdefile/kurlbar.cpp:952 msgid "&URL:" msgstr "URL(&U):" #: tdefile/kurlbar.cpp:959 msgid "" "This is the icon that will appear in the Quick Access panel.

Click on " "the button to select a different icon." msgstr "" "這是會顯示在快速存取面板中的圖示。

按下按鈕以選擇不同的圖示。" #: tdefile/kurlbar.cpp:961 msgid "Choose an &icon:" msgstr "選擇圖示(&I)：" #: tdefile/kurlbar.cpp:977 msgid "&Only show when using this application (%1)" msgstr "只在使用這個應用程式 (%1) 時顯示(&O)" #: tdefile/kurlbar.cpp:980 msgid "" "Select this setting if you want this entry to show only when using the " "current application (%1).

If this setting is not selected, the entry will " "be available in all applications." msgstr "" "如果您希望這個項目只在使用目前的應用程式 (%1) 時顯示，請選擇此設定。\n" "

如果沒有選取這項設定，該項目將在所有應用程式中顯示。" #: tdefile/kurlrequester.cpp:213 msgid "Open file dialog" msgstr "開啟檔案對話方塊" #: tdefile/tdediroperator.cpp:448 msgid "You did not select a file to delete." msgstr "您尚未選擇要刪除的檔案。" #: tdefile/tdediroperator.cpp:449 msgid "Nothing to Delete" msgstr "沒有任何要刪除的東西" #: tdefile/tdediroperator.cpp:471 msgid "" "Do you really want to delete\n" " '%1'?" msgstr "" "您真的要刪除\n" "「%1」？" #: tdefile/tdediroperator.cpp:473 msgid "Delete File" msgstr "刪除檔案" #: tdefile/tdediroperator.cpp:478 #, c-format msgid "" "_n: Do you really want to delete this item?\n" "Do you really want to delete these %n items?" msgstr "您真的要刪除這 %n 個項目嗎？" #: tdefile/tdediroperator.cpp:480 msgid "Delete Files" msgstr "刪除檔案" #: tdefile/tdediroperator.cpp:511 msgid "You did not select a file to trash." msgstr "您尚未選擇要丟到資源回收桶的檔案。" #: tdefile/tdediroperator.cpp:512 msgid "Nothing to Trash" msgstr "沒有要丟到資源回收桶的東西" #: tdefile/tdediroperator.cpp:534 msgid "" "Do you really want to trash\n" " '%1'?" msgstr "" "您真的要把\n" "「%1」丟到資源回收桶？" #: tdefile/tdediroperator.cpp:536 msgid "Trash File" msgstr "資源回收桶檔案" #: tdefile/tdediroperator.cpp:537 tdefile/tdediroperator.cpp:544 msgid "" "_: to trash\n" "&Trash" msgstr "資源回收桶(&T)" #: tdefile/tdediroperator.cpp:541 #, c-format msgid "" "_n: translators: not called for n == 1\n" "Do you really want to trash these %n items?" msgstr "您真的要把這 %n 個項目丟到資源回收桶嗎？" #: tdefile/tdediroperator.cpp:543 msgid "Trash Files" msgstr "資源回收桶檔案" #: tdefile/tdediroperator.cpp:658 tdefile/tdediroperator.cpp:726 msgid "The specified folder does not exist or was not readable." msgstr "指定的資料夾不存在或無法讀取。" #: tdefile/tdediroperator.cpp:920 tdefile/tdediroperator.cpp:1321 #: tdefile/tdefiledetailview.cpp:63 msgid "Detailed View" msgstr "詳細檢視" #: tdefile/tdediroperator.cpp:925 tdefile/tdediroperator.cpp:1319 msgid "Short View" msgstr "簡短檢視" #: tdefile/tdediroperator.cpp:1260 msgid "Parent Folder" msgstr "上層資料夾" #: tdefile/tdediroperator.cpp:1264 tdefile/tdefilespeedbar.cpp:47 msgid "Home Folder" msgstr "家資料夾" #: tdefile/tdediroperator.cpp:1271 msgid "Move to Trash" msgstr "移至資源回收桶" #: tdefile/tdediroperator.cpp:1282 msgid "Sorting" msgstr "排序中" #: tdefile/tdediroperator.cpp:1283 msgid "By Name" msgstr "依名稱" #: tdefile/tdediroperator.cpp:1286 msgid "By Date" msgstr "依日期" #: tdefile/tdediroperator.cpp:1289 msgid "By Size" msgstr "依大小" #: tdefile/tdediroperator.cpp:1292 msgid "Reverse" msgstr "反轉" #: tdefile/tdediroperator.cpp:1302 msgid "Folders First" msgstr "資料夾在前" #: tdefile/tdediroperator.cpp:1304 msgid "Case Insensitive" msgstr "不區分大小寫" #: tdefile/tdediroperator.cpp:1324 msgid "Show Hidden Files" msgstr "顯示隱藏檔案" #: tdefile/tdediroperator.cpp:1327 msgid "Separate Folders" msgstr "分開資料夾" #: tdefile/tdediroperator.cpp:1331 msgid "Show Preview" msgstr "顯示預覽" #: tdefile/tdediroperator.cpp:1335 msgid "Hide Preview" msgstr "隱藏預覽" #: tdefile/tdefiledetailview.cpp:67 msgid "Date" msgstr "日期" #: tdefile/tdefiledetailview.cpp:68 msgid "Permissions" msgstr "權限" #: tdefile/tdefiledialog.cpp:350 msgid "Please specify the filename to save to." msgstr "請指定要儲存的檔案名稱。" #: tdefile/tdefiledialog.cpp:352 msgid "Please select the file to open." msgstr "請選擇要開啟的檔案。" #: tdefile/tdefiledialog.cpp:413 tdefile/tdefiledialog.cpp:456 #: tdefile/tdefiledialog.cpp:1557 msgid "You can only select local files." msgstr "您只能選取本地檔案。" #: tdefile/tdefiledialog.cpp:414 tdefile/tdefiledialog.cpp:457 #: tdefile/tdefiledialog.cpp:1558 msgid "Remote Files Not Accepted" msgstr "不接受遠端檔案" #: tdefile/tdefiledialog.cpp:448 msgid "" "%1\n" "does not appear to be a valid URL.\n" msgstr "" "%1\n" "似乎不是有效的 URL。\n" #: tdefile/tdefiledialog.cpp:448 msgid "Invalid URL" msgstr "無效的 URL" #: tdefile/tdefiledialog.cpp:785 msgid "" "

While typing in the text area, you may be presented with possible " "matches. This feature can be controlled by clicking with the right mouse " "button and selecting a preferred mode from the Text Completion menu." msgstr "" "

在文字區輸入時，您會看到可能的相符項目。這項功能可以按滑鼠右鍵從文字補" "齊選單選擇您所偏好的模式來控制。" #: tdefile/tdefiledialog.cpp:794 msgid "This is the name to save the file as." msgstr "這是儲存檔案時所用的名稱。" #: tdefile/tdefiledialog.cpp:799 msgid "" "This is the list of files to open. More than one file can be specified by " "listing several files, separated by spaces." msgstr "這是要開啟的檔案清單。如果想要指定多個檔案，可以用空格分隔。" #: tdefile/tdefiledialog.cpp:806 msgid "This is the name of the file to open." msgstr "這是要開啟的檔案的名稱。" #: tdefile/tdefiledialog.cpp:844 msgid "Current location" msgstr "目前位置" #: tdefile/tdefiledialog.cpp:845 msgid "" "This is the currently listed location. The drop-down list also lists " "commonly used locations. This includes standard locations, such as your home " "folder, as well as locations that have been visited recently." msgstr "" "這裡是目前清單的位置。常常使用的位置會列在這裡。這包含了標準位置，像是您的家" "目錄，還有最近參訪過的位置。" #: tdefile/tdefiledialog.cpp:852 #, c-format msgid "Root Folder: %1" msgstr "Root 資料夾： %1" #: tdefile/tdefiledialog.cpp:858 #, c-format msgid "Home Folder: %1" msgstr "Home 資料夾： %1" #: tdefile/tdefiledialog.cpp:867 #, c-format msgid "Documents: %1" msgstr "文件：%1" #: tdefile/tdefiledialog.cpp:874 #, c-format msgid "Desktop: %1" msgstr "桌面：%1" #: tdefile/tdefiledialog.cpp:915 msgid "" "Click this button to enter the parent folder.

For instance, if the " "current location is file:/home/%1 clicking this button will take you to " "file:/home." msgstr "" "按這個按鈕來進入上一層目錄。

例如，如果目前位置是 file:/home/%1，按這個" "按鈕將把您帶到 file:/home。" #: tdefile/tdefiledialog.cpp:919 msgid "Click this button to move backwards one step in the browsing history." msgstr "按這個按鈕在瀏覽歷史中向後移動一步。" #: tdefile/tdefiledialog.cpp:921 msgid "Click this button to move forward one step in the browsing history." msgstr "按這個按鈕在瀏覽歷史中向前移動一步。" #: tdefile/tdefiledialog.cpp:923 msgid "Click this button to reload the contents of the current location." msgstr "按這個按鈕來重新載入目前位置的內容。" #: tdefile/tdefiledialog.cpp:926 msgid "Click this button to create a new folder." msgstr "按這個按鈕來建立新資料夾。" #: tdefile/tdefiledialog.cpp:929 msgid "Show Quick Access Navigation Panel" msgstr "顯示快速存取導覽面板" #: tdefile/tdefiledialog.cpp:930 msgid "Hide Quick Access Navigation Panel" msgstr "隱藏快速存取導覽面板" #: tdefile/tdefiledialog.cpp:935 msgid "Show Bookmarks" msgstr "顯示書籤" #: tdefile/tdefiledialog.cpp:936 msgid "Hide Bookmarks" msgstr "隱藏書籤" #: tdefile/tdefiledialog.cpp:941 msgid "" "This is the configuration menu for the file dialog. Various options can " "be accessed from this menu including:

  • how files are sorted in the " "list
  • types of view, including icon and list
  • showing of " "hidden files
  • the Quick Access navigation panel
  • file " "previews
  • separating folders from files
" msgstr "" "這是檔案對話方塊的組態設定選單。此選單中可存取的各種選項包括：
  • 清" "單中的檔案如何排序
  • 檢視類型，包括圖示和列表
  • 隱藏檔案的顯示
  • 快速存取導覽面板
  • 檔案預覽
  • 區分檔案和目錄
" #: tdefile/tdefiledialog.cpp:997 msgid "&Location:" msgstr "位置(&L)：" #: tdefile/tdefiledialog.cpp:1023 msgid "" "This is the filter to apply to the file list. File names that do not " "match the filter will not be shown.

You may select from one of the preset " "filters in the drop down menu, or you may enter a custom filter directly " "into the text area.

Wildcards such as * and ? are allowed." msgstr "" "這是應用到檔案清單的篩選器。不符合該篩選器的檔案名稱將不會被顯示。

您可" "以從下拉選單中選擇預設的篩選器，或者直接在文字區域中輸入自訂的篩選器。

允許" "使用 * 和 ? 萬用字元。" #: tdefile/tdefiledialog.cpp:1029 msgid "&Filter:" msgstr "篩選器(&F)：" #: tdefile/tdefiledialog.cpp:1487 msgid "" "The chosen filenames do not\n" "appear to be valid." msgstr "" "所選取的檔案名稱\n" "大豆豆豆得豆得豆豆都似乎無效。" #: tdefile/tdefiledialog.cpp:1489 msgid "Invalid Filenames" msgstr "無效的檔名" #: tdefile/tdefiledialog.cpp:1519 msgid "" "The requested filenames\n" "%1\n" "do not appear to be valid;\n" "make sure every filename is enclosed in double quotes." msgstr "" "要求的檔案名稱\n" "%1\n" "似乎無效；\n" "請確定每個檔案名稱已用雙引號括起來。" #: tdefile/tdefiledialog.cpp:1523 msgid "Filename Error" msgstr "檔案名稱錯誤" #: tdefile/tdefiledialog.cpp:1680 msgid "*|All Folders" msgstr "*|所有資料夾" #: tdefile/tdefiledialog.cpp:1683 tdefile/tdefilefiltercombo.cpp:32 msgid "*|All Files" msgstr "*|所有檔案" #: tdefile/tdefiledialog.cpp:1980 msgid "Automatically select filename e&xtension (%1)" msgstr "自動選擇檔案名稱延伸檔名(&X)[%1]" #: tdefile/tdefiledialog.cpp:1981 msgid "the extension %1" msgstr "延伸檔名 %1" #: tdefile/tdefiledialog.cpp:1989 msgid "Automatically select filename e&xtension" msgstr "自動選擇報導延伸檔名(&X)" #: tdefile/tdefiledialog.cpp:1990 msgid "a suitable extension" msgstr "合適的延伸檔名" #: tdefile/tdefiledialog.cpp:2001 msgid "" "This option enables some convenient features for saving files with " "extensions:

  1. Any extension specified in the %1 text area " "will be updated if you change the file type to save in.

  2. If " "no extension is specified in the %2 text area when you click Save, %3 will be added to the end of the filename (if the filename does not " "already exist). This extension is based on the file type that you have " "chosen to save in.

    If you do not want TDE to supply an extension for " "the filename, you can either turn this option off or you can suppress it by " "adding a period (.) to the end of the filename (the period will be " "automatically removed).
If unsure, keep this option enabled as it " "makes your files more manageable." msgstr "" "這個選項啟用了一些儲存檔案名稱與延伸檔名的便利功能：
  1. 如果您改變了" "要儲存的檔案類型，任何在 %1 文字區域指定的延伸檔名都會被更新。" "

  2. 當您按下儲存時，如果在 %2 文字區域中沒有指定延" "伸檔名，%3 會被加到檔案名稱的結尾（如果檔案名稱尚未存在）。這個延伸檔名是根據" "您選擇儲存的檔案類型而定。

    如果你不想要 TDE 提供任何延伸檔名，您可以將" "此選項關閉或者您可以在檔案名稱的結尾加上句點(.)來限制它（這個句點會自動被移" "除）。
如果不確定，保持啟用此選項，因為它會讓您的檔案更容易管理。" #: tdefile/tdefiledialog.cpp:2275 msgid "" "This button allows you to bookmark specific locations. Click on this " "button to open the bookmark menu where you may add, edit or select a " "bookmark.

These bookmarks are specific to the file dialog, but otherwise " "operate like bookmarks elsewhere in TDE." msgstr "" "這個按鈕可以讓您將指定位置加入書籤。按這個按鈕將打開書籤選單，其中您可以" "添加、編輯或選擇書籤。

這些書籤專用於檔案對話方塊，但是可以像 TDE 其他地方" "的書籤一樣操作。" #: tdefile/tdefilefiltercombo.cpp:164 msgid "All Supported Files" msgstr "所有支援的檔案" #: tdefile/tdefileiconview.cpp:62 msgid "Small Icons" msgstr "小圖示" #: tdefile/tdefileiconview.cpp:67 msgid "Large Icons" msgstr "大圖示" #: tdefile/tdefileiconview.cpp:75 msgid "Thumbnail Previews" msgstr "圖示預覽" #: tdefile/tdefileiconview.cpp:119 msgid "Icon View" msgstr "圖示檢視" #: tdefile/tdefilemetainfowidget.cpp:111 msgid "" msgstr "<錯誤>" #: tdefile/tdefilepreview.cpp:63 msgid "Preview" msgstr "預覽" #: tdefile/tdefilepreview.cpp:69 msgid "No preview available." msgstr "無法預覽。" #: tdefile/tdefilesharedlg.cpp:58 msgid "&Share" msgstr "共用(&S)" #: tdefile/tdefilesharedlg.cpp:143 msgid "Only folders in your home folder can be shared." msgstr "只可共用您家目錄中的資料夾。" #: tdefile/tdefilesharedlg.cpp:154 msgid "Not shared" msgstr "不共用" #: tdefile/tdefilesharedlg.cpp:159 msgid "Shared - read only for others" msgstr "" #: tdefile/tdefilesharedlg.cpp:164 msgid "Shared - writeable for others" msgstr "" #: tdefile/tdefilesharedlg.cpp:186 msgid "" "Sharing this folder makes it available under Linux/UNIX (NFS) and Windows " "(Samba)." msgstr "" "共用這個目錄，將使它可以在 Linux/UNIX (NFS) 和 Windows (Samba) 中存取。" #: tdefile/tdefilesharedlg.cpp:192 msgid "You can also reconfigure file sharing authorization." msgstr "您還可以重新設定檔案共用的授權。" #: tdefile/tdefilesharedlg.cpp:195 tdefile/tdefilesharedlg.cpp:222 msgid "Configure File Sharing..." msgstr "設定檔案共用..." #: tdefile/tdefilesharedlg.cpp:207 msgid "" "Error running 'filesharelist'. Check if installed and in $PATH or /usr/sbin." msgstr "" "執行「filesharelist」出錯。請檢查該程式是否已經安裝在 $PATH 或 /usr/sbin 中。" #: tdefile/tdefilesharedlg.cpp:214 msgid "You need to be authorized to share folders." msgstr "您需要獲得授權才可以共用資料夾。" #: tdefile/tdefilesharedlg.cpp:217 msgid "File sharing is disabled." msgstr "檔案分享已停用。" #: tdefile/tdefilesharedlg.cpp:282 msgid "Sharing folder '%1' failed." msgstr "分享資料夾「%1」失敗。" #: tdefile/tdefilesharedlg.cpp:283 msgid "" "An error occurred while trying to share folder '%1'. Make sure that the Perl " "script 'fileshareset' is set suid root." msgstr "" "當嘗試分享資料夾「%1」時發生錯誤。請確定 Perl 命令稿「fileshareset」是設定 " "suid 為 root。" #: tdefile/tdefilesharedlg.cpp:288 msgid "Unsharing folder '%1' failed." msgstr "取消分享資料夾「%1」失敗。" #: tdefile/tdefilesharedlg.cpp:289 msgid "" "An error occurred while trying to unshare folder '%1'. Make sure that the " "Perl script 'fileshareset' is set suid root." msgstr "" "當嘗試取消分享資料夾「%1」時發生錯誤。請確定 Perl 命令稿「fileshareset」是設" "定 suid 為 root。" #: tdefile/tdefilespeedbar.cpp:48 msgid "Desktop" msgstr "桌面" #: tdefile/tdefilespeedbar.cpp:49 msgid "Documents" msgstr "文件" #: tdefile/tdefilespeedbar.cpp:50 msgid "Downloads" msgstr "" #: tdefile/tdefilespeedbar.cpp:51 msgid "Music" msgstr "" #: tdefile/tdefilespeedbar.cpp:52 #, fuzzy msgid "Pictures" msgstr "所有圖片" #: tdefile/tdefilespeedbar.cpp:53 #, fuzzy msgid "Public" msgstr "公開金鑰:" #: tdefile/tdefilespeedbar.cpp:54 msgid "Templates" msgstr "" #: tdefile/tdefilespeedbar.cpp:55 msgid "Videos" msgstr "" #: tdefile/tdefilespeedbar.cpp:60 msgid "Storage Media" msgstr "儲存媒體" #: tdefile/tdefilespeedbar.cpp:66 msgid "Network Folders" msgstr "網路資料夾" #: tdefile/tdefileview.cpp:77 msgid "Unknown View" msgstr "無法識別的檢視" #: tdeio/chmodjob.cpp:173 msgid "" "Could not modify the ownership of file %1. You have insufficient " "access to the file to perform the change." msgstr "" "無法更改檔案 %1 的擁有權。您沒有足夠的檔案存取權來做這個改變。" #: tdeio/chmodjob.cpp:173 msgid "&Skip File" msgstr "略過檔案(&S)" #: tdeio/defaultprogress.cpp:104 msgid "Source:" msgstr "來源：" #: tdeio/defaultprogress.cpp:111 tdeio/defaultprogress.cpp:433 msgid "Destination:" msgstr "目的地：" #: tdeio/defaultprogress.cpp:149 msgid "&Keep this window open after transfer is complete" msgstr "下載完畢後保持開啟這個視窗(&K)" #: tdeio/defaultprogress.cpp:157 msgid "Open &File" msgstr "開啟檔案(&F)" #: tdeio/defaultprogress.cpp:163 msgid "Open &Destination" msgstr "開啟目的地(&D)：" #: tdeio/defaultprogress.cpp:226 #, no-c-format msgid "" "_n: %n folder\n" "%n folders" msgstr "%n 個資料夾" #: tdeio/defaultprogress.cpp:228 #, no-c-format msgid "" "_n: %n file\n" "%n files" msgstr "%n 個檔案" #: tdeio/defaultprogress.cpp:239 msgid "%1 % of %2 " msgstr "%2 之 %1 % " #: tdeio/defaultprogress.cpp:241 msgid "" "_n: %1 % of 1 file\n" "%1 % of %n files" msgstr "%1 % / %n 個檔案" #: tdeio/defaultprogress.cpp:243 msgid "%1 %" msgstr "%1 %" #: tdeio/defaultprogress.cpp:252 msgid " (Copying)" msgstr " (複製中)" #: tdeio/defaultprogress.cpp:255 msgid " (Moving)" msgstr " (移動中)" #: tdeio/defaultprogress.cpp:258 msgid " (Deleting)" msgstr " (刪除中)" #: tdeio/defaultprogress.cpp:261 msgid " (Creating)" msgstr " (建立中)" #: tdeio/defaultprogress.cpp:264 msgid " (Done)" msgstr " (完成)" #: tdeio/defaultprogress.cpp:285 msgid "%1 of %2 complete" msgstr "%2 之 %1 完成" #: tdeio/defaultprogress.cpp:299 tdeio/defaultprogress.cpp:314 msgid "" "_n: %1 / %n folder\n" "%1 / %n folders" msgstr "%1 / %n 個資料夾" #: tdeio/defaultprogress.cpp:301 tdeio/defaultprogress.cpp:317 msgid "" "_n: %1 / %n file\n" "%1 / %n files" msgstr "%1 / %n 個檔案" #: tdeio/defaultprogress.cpp:327 msgid "%1/s ( %2 remaining )" msgstr "%1/s ( 剩下 %2 )" #: tdeio/defaultprogress.cpp:336 msgid "Copy File(s) Progress" msgstr "複製檔案進度" #: tdeio/defaultprogress.cpp:350 msgid "Move File(s) Progress" msgstr "移動檔案進度" #: tdeio/defaultprogress.cpp:364 msgid "Creating Folder" msgstr "建立資料夾" #: tdeio/defaultprogress.cpp:376 msgid "Delete File(s) Progress" msgstr "刪除檔案進度" #: tdeio/defaultprogress.cpp:387 msgid "Loading Progress" msgstr "載入進度中" #: tdeio/defaultprogress.cpp:396 msgid "Examining File Progress" msgstr "測試檔案進度" #: tdeio/defaultprogress.cpp:403 #, c-format msgid "Mounting %1" msgstr "裝載 %1 中" #: tdeio/defaultprogress.cpp:418 #, c-format msgid "Resuming from %1" msgstr "從 %1 恢復" #: tdeio/defaultprogress.cpp:420 msgid "Not resumable" msgstr "不可恢復" #: tdeio/defaultprogress.cpp:456 msgid "%1/s (done)" msgstr "%1/s (完成)" #: tdeio/global.cpp:48 tdeio/global.cpp:81 msgid "%1 B" msgstr "%1 B" #: tdeio/global.cpp:62 msgid "%1 TB" msgstr "%1 TB" #: tdeio/global.cpp:64 msgid "%1 GB" msgstr "%1 GB" #: tdeio/global.cpp:70 msgid "%1 MB" msgstr "%1 MB" #: tdeio/global.cpp:76 msgid "%1 KB" msgstr "%1 KB" #: tdeio/global.cpp:86 msgid "0 B" msgstr "0 B" #: tdeio/global.cpp:122 msgid "" "_n: 1 day %1\n" "%n days %1" msgstr "%n 天 %1" #: tdeio/global.cpp:152 msgid "No Items" msgstr "沒有項目" #: tdeio/global.cpp:152 #, c-format msgid "" "_n: One Item\n" "%n Items" msgstr "%n 個項目" #: tdeio/global.cpp:154 msgid "No Files" msgstr "沒有檔案" #: tdeio/global.cpp:154 #, c-format msgid "" "_n: One File\n" "%n Files" msgstr "%n 個檔案" #: tdeio/global.cpp:158 msgid "(%1 Total)" msgstr "(共 %1 個)" #: tdeio/global.cpp:161 msgid "No Folders" msgstr "沒有資料夾" #: tdeio/global.cpp:161 #, c-format msgid "" "_n: One Folder\n" "%n Folders" msgstr "%n 個資料夾" #: tdeio/global.cpp:237 #, c-format msgid "Could not read %1." msgstr "無法讀取 %1。" #: tdeio/global.cpp:240 #, c-format msgid "Could not write to %1." msgstr "無法寫入至 %1。" #: tdeio/global.cpp:243 #, c-format msgid "Could not start process %1." msgstr "無法啟動程序 %1。" #: tdeio/global.cpp:246 #, c-format msgid "" "Internal Error\n" "Please send a full bug report at http://bugs.trinitydesktop.org\n" "%1" msgstr "" "內部錯誤\n" "請將完整的問題報告傳送到 http://bugs.trinitydesktop.org\n" "%1" #: tdeio/global.cpp:249 #, c-format msgid "Malformed URL %1." msgstr "不正確的 URL %1。" #: tdeio/global.cpp:252 msgid "The protocol %1 is not supported." msgstr "不支援 %1 通訊協定。" #: tdeio/global.cpp:255 msgid "The protocol %1 is only a filter protocol." msgstr "%1 只是一個過濾協定。" #: tdeio/global.cpp:262 msgid "%1 is a folder, but a file was expected." msgstr "%1 是一個資料夾，但現在需要的是檔案。" #: tdeio/global.cpp:265 msgid "%1 is a file, but a folder was expected." msgstr "%1 是一個檔案，但現在需要的是資料夾。" #: tdeio/global.cpp:268 msgid "The file or folder %1 does not exist." msgstr "檔案或資料夾 %1 不存在。" #: tdeio/global.cpp:271 msgid "A file named %1 already exists." msgstr "名為 %1 的檔案已經存在。" #: tdeio/global.cpp:274 msgid "A folder named %1 already exists." msgstr "名為 %1 的資料夾已經存在。" #: tdeio/global.cpp:277 msgid "No hostname specified." msgstr "沒有指定主機名稱。" #: tdeio/global.cpp:277 #, c-format msgid "Unknown host %1" msgstr "不明的主機 %1" #: tdeio/global.cpp:280 #, c-format msgid "Access denied to %1." msgstr "拒絕存取 %1。" #: tdeio/global.cpp:283 #, c-format msgid "" "Access denied.\n" "Could not write to %1." msgstr "" "拒絕存取。\n" "無法寫入至 %1。" #: tdeio/global.cpp:286 #, c-format msgid "Could not enter folder %1." msgstr "無法進入資料夾 %1。" #: tdeio/global.cpp:289 msgid "The protocol %1 does not implement a folder service." msgstr "協定 %1 並未實作資料夾服務。" #: tdeio/global.cpp:292 #, c-format msgid "Found a cyclic link in %1." msgstr "在 %1 中發現一個循環連結。" #: tdeio/global.cpp:298 #, c-format msgid "Found a cyclic link while copying %1." msgstr "在複製 %1 時發現一個循環連結。" #: tdeio/global.cpp:301 #, c-format msgid "Could not create socket for accessing %1." msgstr "無法建立 socket 以存取 %1。" #: tdeio/global.cpp:304 #, c-format msgid "Could not connect to host %1." msgstr "無法連線到主機 %1。" #: tdeio/global.cpp:307 msgid "Connection to host %1 is broken." msgstr "連線到主機 %1 失敗。" #: tdeio/global.cpp:310 msgid "The protocol %1 is not a filter protocol." msgstr "協定 %1 不是一個過濾協定。" #: tdeio/global.cpp:313 #, c-format msgid "" "Could not mount device.\n" "The reported error was:\n" "%1" msgstr "" "無法裝載裝置。\n" "回應的錯誤為：\n" "%1" #: tdeio/global.cpp:316 #, c-format msgid "" "Could not unmount device.\n" "The reported error was:\n" "%1" msgstr "" "無法卸載裝置。\n" "回應的錯誤為：\n" "%1" #: tdeio/global.cpp:319 #, c-format msgid "Could not read file %1." msgstr "無法讀取檔案 %1。" #: tdeio/global.cpp:322 #, c-format msgid "Could not write to file %1." msgstr "無法寫入檔案 %1。" #: tdeio/global.cpp:325 #, c-format msgid "Could not bind %1." msgstr "無法 bind %1。" #: tdeio/global.cpp:328 #, c-format msgid "Could not listen %1." msgstr "無法聽候 (listen) %1。" #: tdeio/global.cpp:331 #, c-format msgid "Could not accept %1." msgstr "無法接受 (accept) %1。" #: tdeio/global.cpp:337 #, c-format msgid "Could not access %1." msgstr "無法存取 %1。" #: tdeio/global.cpp:340 #, c-format msgid "Could not terminate listing %1." msgstr "無法終結 %1 主機的 listen 呼叫。" #: tdeio/global.cpp:343 #, c-format msgid "Could not make folder %1." msgstr "無法建立資料夾 %1。" #: tdeio/global.cpp:346 #, c-format msgid "Could not remove folder %1." msgstr "無法移除資料夾 %1。" #: tdeio/global.cpp:349 #, c-format msgid "Could not resume file %1." msgstr "無法恢復檔案 %1。" #: tdeio/global.cpp:352 #, c-format msgid "Could not rename file %1." msgstr "無法重新命名檔案 %1。" #: tdeio/global.cpp:355 #, c-format msgid "Could not change permissions for %1." msgstr "無法變更 %1 的權限。" #: tdeio/global.cpp:358 #, c-format msgid "Could not delete file %1." msgstr "無法刪除檔案 %1。" #: tdeio/global.cpp:361 msgid "The process for the %1 protocol died unexpectedly." msgstr "%1 協定程式不預期的結束。" #: tdeio/global.cpp:364 #, c-format msgid "" "Error. Out of memory.\n" "%1" msgstr "" "錯誤。記憶體不足。\n" "%1" #: tdeio/global.cpp:367 #, c-format msgid "" "Unknown proxy host\n" "%1" msgstr "" "不明的代理伺服器主機\n" "%1" #: tdeio/global.cpp:370 msgid "Authorization failed, %1 authentication not supported" msgstr "授權失敗，%1 認證不支援" #: tdeio/global.cpp:373 #, c-format msgid "" "User canceled action\n" "%1" msgstr "" "使用者取消的動作\n" "%1" #: tdeio/global.cpp:376 #, c-format msgid "" "Internal error in server\n" "%1" msgstr "伺服器 %1 發生內部錯誤" #: tdeio/global.cpp:379 #, c-format msgid "" "Timeout on server\n" "%1" msgstr "伺服器 %1 發生逾時" #: tdeio/global.cpp:382 #, c-format msgid "" "Unknown error\n" "%1" msgstr "" "不明的錯誤\n" "%1" #: tdeio/global.cpp:385 #, c-format msgid "" "Unknown interrupt\n" "%1" msgstr "" "不明的中斷\n" "%1" #: tdeio/global.cpp:396 msgid "" "Could not delete original file %1.\n" "Please check permissions." msgstr "" "無法刪除原始檔 %1。\n" "請確定權限。" #: tdeio/global.cpp:399 msgid "" "Could not delete partial file %1.\n" "Please check permissions." msgstr "" "無法刪除部分檔案 %1。\n" "請確定權限。" #: tdeio/global.cpp:402 msgid "" "Could not rename original file %1.\n" "Please check permissions." msgstr "" "無法重新命名原始檔 %1。\n" "請確定權限。" #: tdeio/global.cpp:405 msgid "" "Could not rename partial file %1.\n" "Please check permissions." msgstr "" "無法重新命名部分檔案 %1。\n" "請確定權限。" #: tdeio/global.cpp:408 msgid "" "Could not create symlink %1.\n" "Please check permissions." msgstr "" "無法建立符號連結 %1。\n" "請確定權限。" #: tdeio/global.cpp:414 msgid "" "Could not write file %1.\n" "Disk full." msgstr "" "無法寫入檔案 %1。\n" "磁碟已滿。" #: tdeio/global.cpp:417 #, c-format msgid "" "The source and destination are the same file.\n" "%1" msgstr "" "來源跟目標都是同一個檔案。\n" "%1" #: tdeio/global.cpp:423 msgid "%1 is required by the server, but is not available." msgstr "此伺服器要求 %1，但卻無法使用。" #: tdeio/global.cpp:426 msgid "Access to restricted port in POST denied." msgstr "對 POST 中限制的通訊埠存取被拒。" #: tdeio/global.cpp:429 #, fuzzy msgid "" "Could not access %1.\n" "Offline mode active." msgstr "無法存取 %1。" #: tdeio/global.cpp:432 msgid "" "Unknown error code %1\n" "%2\n" "Please send a full bug report at http://bugs.trinitydesktop.org." msgstr "" "不明的錯誤代碼 %1\n" "%2\n" "請將完整的問題報告傳送到 http://bugs.trinitydesktop.org。" #: tdeio/global.cpp:442 #, c-format msgid "Opening connections is not supported with the protocol %1." msgstr "%1 通訊協定不支援開啟連線。" #: tdeio/global.cpp:444 #, c-format msgid "Closing connections is not supported with the protocol %1." msgstr "%1 通訊協定不支援關閉連線。" #: tdeio/global.cpp:446 #, c-format msgid "Accessing files is not supported with the protocol %1." msgstr "%1 通訊協定不支援存取檔案。" #: tdeio/global.cpp:448 msgid "Writing to %1 is not supported." msgstr "不支援寫入 %1。" #: tdeio/global.cpp:450 #, c-format msgid "There are no special actions available for protocol %1." msgstr "%1 通訊協定沒有可用的特殊的動作。" #: tdeio/global.cpp:452 #, c-format msgid "Listing folders is not supported for protocol %1." msgstr "%1 通訊協定不支援列出資料夾內容。" #: tdeio/global.cpp:454 msgid "Retrieving data from %1 is not supported." msgstr "不支援從 %1 取回資料。" #: tdeio/global.cpp:456 msgid "Retrieving mime type information from %1 is not supported." msgstr "不支援從 %1 取回 mime 類型資訊。" #: tdeio/global.cpp:458 msgid "Renaming or moving files within %1 is not supported." msgstr "不支援在 %1 裡重新命名或移動檔案。" #: tdeio/global.cpp:460 #, c-format msgid "Creating symlinks is not supported with protocol %1." msgstr "%1 通訊協定不支援建立符號連結。" #: tdeio/global.cpp:462 msgid "Copying files within %1 is not supported." msgstr "不支援在 %1 裡複製檔案。" #: tdeio/global.cpp:464 msgid "Deleting files from %1 is not supported." msgstr "不支援由 %1 刪除檔案。" #: tdeio/global.cpp:466 #, c-format msgid "Creating folders is not supported with protocol %1." msgstr "%1 通訊協定不支援建立資料夾。" #: tdeio/global.cpp:468 #, c-format msgid "Changing the attributes of files is not supported with protocol %1." msgstr "%1 通訊協定不支援變更檔案屬性。" #: tdeio/global.cpp:470 msgid "Using sub-URLs with %1 is not supported." msgstr "%1 通訊協定不支援子 URL 的使用。" #: tdeio/global.cpp:472 #, c-format msgid "Multiple get is not supported with protocol %1." msgstr "%1 通訊協定不支援多重擷取。" #: tdeio/global.cpp:474 msgid "Protocol %1 does not support action %2." msgstr "通訊協定 %1 不支援動作 %2。" #: tdeio/global.cpp:494 tdeio/global.cpp:576 msgid "(unknown)" msgstr "(不明)" #: tdeio/global.cpp:506 msgid "Technical reason: " msgstr "技術原因：" #: tdeio/global.cpp:507 msgid "

Details of the request:" msgstr "

要求的細節：" #: tdeio/global.cpp:508 msgid "

  • URL: %1
    • " msgstr "

    • URL：%1
      • " #: tdeio/global.cpp:510 msgid "
    • Protocol: %1
      • " msgstr "
    • 協定：%1
      • " #: tdeio/global.cpp:512 msgid "
    • Date and time: %1
      • " msgstr "
    • 日期和時刻：%1
      • " #: tdeio/global.cpp:513 msgid "
    • Additional information: %1
    " msgstr "
  • 額外資訊：%1
" #: tdeio/global.cpp:515 msgid "

Possible causes:

  • " msgstr "

    可能原因：

    • " #: tdeio/global.cpp:520 msgid "

      Possible solutions:

      • " msgstr "

        可能的解決方法：

        • " #: tdeio/global.cpp:586 msgid "" "Contact your appropriate computer support system, whether the system " "administrator, or technical support group for further assistance." msgstr "" "請聯繫合適的電腦支援組織，例如系統管理員或技術支援小組，以取得進一步的協助。" #: tdeio/global.cpp:589 msgid "Contact the administrator of the server for further assistance." msgstr "請聯繫伺服器的管理員，以取得進一步的協助。" #: tdeio/global.cpp:592 msgid "Check your access permissions on this resource." msgstr "請檢查您對該資源的存取權限。" #: tdeio/global.cpp:593 msgid "" "Your access permissions may be inadequate to perform the requested operation " "on this resource." msgstr "您可能沒有足夠權限來執行所要求的對該資源的作業。" #: tdeio/global.cpp:595 msgid "" "The file may be in use (and thus locked) by another user or application." msgstr "該檔案可能正在被其他使用者或應用程式使用 (所以被鎖定)。" #: tdeio/global.cpp:597 msgid "" "Check to make sure that no other application or user is using the file or " "has locked the file." msgstr "請檢查並確定沒有其他應用程式或使用者正在使用或鎖定該檔案。" #: tdeio/global.cpp:599 msgid "Although unlikely, a hardware error may have occurred." msgstr "雖然不太可能，但似乎出現了硬體錯誤。" #: tdeio/global.cpp:601 msgid "You may have encountered a bug in the program." msgstr "您可能遇到了程式中的錯誤。" #: tdeio/global.cpp:602 msgid "" "This is most likely to be caused by a bug in the program. Please consider " "submitting a full bug report as detailed below." msgstr "" "這最有可能是程式中的錯誤所導致。請考慮提效一份詳細的問題報告，詳情如下。" #: tdeio/global.cpp:604 msgid "" "Update your software to the latest version. Your distribution should provide " "tools to update your software." msgstr "請將您的軟體更新至最新版本。您使用的發行版本應該提供更新軟體的工具。" #: tdeio/global.cpp:606 #, fuzzy msgid "" "When all else fails, please consider helping the TDE team or the third party " "maintainer of this software by submitting a high quality bug report. If the " "software is provided by a third party, please contact them directly. " "Otherwise, first look to see if the same bug has been submitted by someone " "else by searching at the TDE bug " "reporting website. If not, take note of the details given above, and " "include them in your bug report, along with as many other details as you " "think might help." msgstr "" "如果您多番嘗試後仍然無法解決問題，請考慮幫助 TDE 團隊或該軟體的第三方維護者，" "並提交一份高品質的錯誤報告。如果該軟體是由第三方提供的，請直接與他們聯繫。如" "果該軟體是 TDE 團隊提供的，請先在 TDE 錯誤報告網站 搜尋，看看是否已經有人報告了相同的錯誤。如果沒有，請" "把上面的詳細資訊，以及任何您認為有幫助的細節，附入您的錯誤報告中。" #: tdeio/global.cpp:614 msgid "There may have been a problem with your network connection." msgstr "您的網路連線可能有問題。" #: tdeio/global.cpp:617 msgid "" "There may have been a problem with your network configuration. If you have " "been accessing the Internet with no problems recently, this is unlikely." msgstr "" "您的網路設定可能有問題。如果您最近存取網際網路沒有問題，這就不太可能了。" #: tdeio/global.cpp:620 msgid "" "There may have been a problem at some point along the network path between " "the server and this computer." msgstr "在網路中這部電腦和對方伺服器之間的路徑可能有問題。" #: tdeio/global.cpp:622 msgid "Try again, either now or at a later time." msgstr "請現在或稍後重試。" #: tdeio/global.cpp:623 msgid "A protocol error or incompatibility may have occurred." msgstr "可能出現了通訊協定錯誤或不相容。" #: tdeio/global.cpp:624 msgid "Ensure that the resource exists, and try again." msgstr "請確實該資源存在，然後再重試。" #: tdeio/global.cpp:625 msgid "The specified resource may not exist." msgstr "指定的資源並不存在。" #: tdeio/global.cpp:626 msgid "You may have incorrectly typed the location." msgstr "您輸入該位置時可能打錯字了。" #: tdeio/global.cpp:627 msgid "Double-check that you have entered the correct location and try again." msgstr "請再三檢查您輸入的位置正確，然後再重試。" #: tdeio/global.cpp:629 msgid "Check your network connection status." msgstr "請檢查您的網路連線狀態。" #: tdeio/global.cpp:633 msgid "Cannot Open Resource For Reading" msgstr "無法開啟資源進行讀取" #: tdeio/global.cpp:634 msgid "" "This means that the contents of the requested file or folder %1 could not be retrieved, as read access could not be obtained." msgstr "" "這就是說，請求的檔案或資料夾 %1 的內容無法接收，因為無法取得" "讀入權限。" #: tdeio/global.cpp:637 msgid "You may not have permissions to read the file or open the folder." msgstr "您也許沒有讀取檔案或者是開啟資料夾。" #: tdeio/global.cpp:643 msgid "Cannot Open Resource For Writing" msgstr "無法開啟資源進行寫入" #: tdeio/global.cpp:644 msgid "" "This means that the file, %1, could not be written to as " "requested, because access with permission to write could not be obtained." msgstr "" "這就是說，該檔案 %1 無法按請求寫入，因為無法取得寫入權限。" #: tdeio/global.cpp:652 msgid "Cannot Initiate the %1 Protocol" msgstr "無法開動 %1 通訊協定" #: tdeio/global.cpp:653 msgid "Unable to Launch Process" msgstr "無法啟動行程" #: tdeio/global.cpp:654 msgid "" "The program on your computer which provides access to the %1 protocol could not be started. This is usually due to technical " "reasons." msgstr "" "在您的電腦上提供 %1 協定存取的程式無法啟動。這通常是由某些技" "術原因所致。" #: tdeio/global.cpp:657 msgid "" "The program which provides compatibility with this protocol may not have " "been updated with your last update of TDE. This can cause the program to be " "incompatible with the current version and thus not start." msgstr "" "提供此通訊協定的相容性的程式，可能並未與您的最新版 TDE 更新。這會造成該程式與" "目前版本不相容而無法啟動。" #: tdeio/global.cpp:665 msgid "Internal Error" msgstr "內部錯誤" #: tdeio/global.cpp:666 msgid "" "The program on your computer which provides access to the %1 protocol has reported an internal error." msgstr "" "在您的電腦上提供 %1 協定存取的程式報告了一個內部錯誤。" #: tdeio/global.cpp:674 msgid "Improperly Formatted URL" msgstr "未正確格式化的 URL" #: tdeio/global.cpp:675 msgid "" "The Uniform Resource Locator (URL) that you entered was not properly formatted. The format " "of a URL is generally as follows:
          protocol://user:" "password@www.example.org:port/folder/filename.extension?query=value
          " msgstr "" "您所輸入的 URL (Uniform Resource " "Locator, 統一資源定位符) 格式有誤。一般 URL 的正確格式應該" "是：
          protocol://使用者:密碼@www.example.org:埠號/資料夾/檔" "名.副檔名?查詢=值
          " #: tdeio/global.cpp:684 #, c-format msgid "Unsupported Protocol %1" msgstr "不支援的協定 %1" #: tdeio/global.cpp:685 msgid "" "The protocol %1 is not supported by the TDE programs " "currently installed on this computer." msgstr "目前安裝在此電腦上的 TDE 程式不支援 %1 通訊協定。" #: tdeio/global.cpp:688 msgid "The requested protocol may not be supported." msgstr "不支援要求的通訊協定。" #: tdeio/global.cpp:689 msgid "" "The versions of the %1 protocol supported by this computer and the server " "may be incompatible." msgstr "此電腦支援的 %1 通訊協定的版本可能和伺服器的版本不相容。" #: tdeio/global.cpp:691 #, fuzzy msgid "" "You may perform a search on the Trinity website for a TDE program (called a " "tdeioslave, ioslave or tdeio) which supports this protocol. Places to search " "include https://" "mirror.git.trinitydesktop.org/cgit/ or the repos for your distribution." msgstr "" "您可以在網際網路上搜尋一個支援此通訊協定的 TDE 程式 (叫做 tdeioslave 或 " "ioslave)。建議從 http://kde-apps.org/ " "和 http://freshmeat.net/ 這兩個地方搜" "尋。" #: tdeio/global.cpp:699 msgid "URL Does Not Refer to a Resource." msgstr "URL 不是一個資源。" #: tdeio/global.cpp:700 msgid "Protocol is a Filter Protocol" msgstr "該協定是一個過濾協定" #: tdeio/global.cpp:701 msgid "" "The Uniform Resource Locator (URL) that you entered did not refer to a specific resource." msgstr "" "您輸入的 URL (Uniform Resource Locator, 統一資源定位符) 並不指向特定的資源。" #: tdeio/global.cpp:704 msgid "" "TDE is able to communicate through a protocol within a protocol; the " "protocol specified is only for use in such situations, however this is not " "one of these situations. This is a rare event, and is likely to indicate a " "programming error." msgstr "" "TDE 能夠在一個協定裡透過另一個協定進行通訊；指定的協定只適用於那種場合，現在" "卻不是那種場合。這個錯誤比較罕見，大概是編程出錯了。" #: tdeio/global.cpp:712 #, c-format msgid "Unsupported Action: %1" msgstr "不支援的動作: %1" #: tdeio/global.cpp:713 msgid "" "The requested action is not supported by the TDE program which is " "implementing the %1 protocol." msgstr "實作 %1 協定的 TDE 程式不支援要求的動作。" #: tdeio/global.cpp:716 msgid "" "This error is very much dependent on the TDE program. The additional " "information should give you more information than is available to the TDE " "input/output architecture." msgstr "" "這個錯誤非常關乎於個別的 TDE 程式。[額外資訊] 應該可以比 TDE 的輸入/輸出架構" "給您更多的資訊。" #: tdeio/global.cpp:719 msgid "Attempt to find another way to accomplish the same outcome." msgstr "請嘗試以其他的方法來達成相同的結果。" #: tdeio/global.cpp:724 msgid "File Expected" msgstr "需要檔案。" #: tdeio/global.cpp:725 msgid "" "The request expected a file, however the folder %1 was " "found instead." msgstr "該要求需要一個檔案，然而找到的 %1 是一個資料夾。" #: tdeio/global.cpp:727 msgid "This may be an error on the server side." msgstr "這個可能是伺服器端的錯誤。" #: tdeio/global.cpp:732 msgid "Folder Expected" msgstr "需要資料夾" #: tdeio/global.cpp:733 msgid "" "The request expected a folder, however the file %1 was " "found instead." msgstr "該要求需要一個資料夾，然而找到的 %1 是一個檔案。" #: tdeio/global.cpp:740 msgid "File or Folder Does Not Exist" msgstr "檔案或資料夾不存在" #: tdeio/global.cpp:741 msgid "The specified file or folder %1 does not exist." msgstr "指定的檔案或資料夾 %1 不存在。" #: tdeio/global.cpp:748 tdeio/job.cpp:1796 tdeio/job.cpp:3263 #: tdeio/job.cpp:3780 tdeio/paste.cpp:65 msgid "File Already Exists" msgstr "檔案已存在" #: tdeio/global.cpp:749 msgid "" "The requested file could not be created because a file with the same name " "already exists." msgstr "無法建立要求的檔案，因為已經有另一個同名的檔案存在了。" #: tdeio/global.cpp:751 msgid "Try moving the current file out of the way first, and then try again." msgstr "請先把現有的檔案移開，再重試。" #: tdeio/global.cpp:753 msgid "Delete the current file and try again." msgstr "請先刪除現有的檔案，再重試。" #: tdeio/global.cpp:754 msgid "Choose an alternate filename for the new file." msgstr "請為新檔案選擇另一個檔名。" #: tdeio/global.cpp:758 tdeio/job.cpp:2973 msgid "Folder Already Exists" msgstr "資料夾已存在" #: tdeio/global.cpp:759 msgid "" "The requested folder could not be created because a folder with the same " "name already exists." msgstr "無法建立要求的資料夾，因為已經有另一個同名的資料夾存在了。" #: tdeio/global.cpp:761 msgid "Try moving the current folder out of the way first, and then try again." msgstr "請先把現有的資料夾移開，再重試。" #: tdeio/global.cpp:763 msgid "Delete the current folder and try again." msgstr "請先刪除現有的資料夾，再重試。" #: tdeio/global.cpp:764 msgid "Choose an alternate name for the new folder." msgstr "請為新資料夾選擇另一個名稱。" #: tdeio/global.cpp:768 msgid "Unknown Host" msgstr "不明的主機" #: tdeio/global.cpp:769 msgid "" "An unknown host error indicates that the server with the requested name, " "%1, could not be located on the Internet." msgstr "" "「不明的主機」這個錯誤，表示在網際網路上找不到所要求的、名為 %1 的伺服器。" #: tdeio/global.cpp:772 msgid "" "The name that you typed, %1, may not exist: it may be incorrectly typed." msgstr "您鍵入的名稱「%1」可能不存在：可能打錯字了。" #: tdeio/global.cpp:779 msgid "Access Denied" msgstr "拒絕存取" #: tdeio/global.cpp:780 msgid "Access was denied to the specified resource, %1." msgstr "指定的資源 %1 拒絕存取。" #: tdeio/global.cpp:782 tdeio/global.cpp:998 msgid "You may have supplied incorrect authentication details or none at all." msgstr "您可能提供了不正確的，或完全沒有提供認證細節。" #: tdeio/global.cpp:784 tdeio/global.cpp:1000 msgid "Your account may not have permission to access the specified resource." msgstr "您的帳號可能沒有權限存取指定的資源。" #: tdeio/global.cpp:786 tdeio/global.cpp:1002 tdeio/global.cpp:1014 msgid "" "Retry the request and ensure your authentication details are entered " "correctly." msgstr "請確定輸入正確的認證細節，再重試要求。" #: tdeio/global.cpp:792 msgid "Write Access Denied" msgstr "拒絕寫入存取" #: tdeio/global.cpp:793 msgid "" "This means that an attempt to write to the file %1 was " "rejected." msgstr "這就是說，試圖寫入檔案 %1 時被拒絕了。" #: tdeio/global.cpp:800 msgid "Unable to Enter Folder" msgstr "無法進入資料夾" #: tdeio/global.cpp:801 msgid "" "This means that an attempt to enter (in other words, to open) the requested " "folder %1 was rejected." msgstr "" "這就是說，試圖進入 (即開啟) 要求的資料夾 %1 時被拒絕了。" #: tdeio/global.cpp:809 msgid "Folder Listing Unavailable" msgstr "無法取得資料夾列表" #: tdeio/global.cpp:810 msgid "Protocol %1 is not a Filesystem" msgstr "該協定 %1 不是一個檔案系統" #: tdeio/global.cpp:811 msgid "" "This means that a request was made which requires determining the contents " "of the folder, and the TDE program supporting this protocol is unable to do " "so." msgstr "" "這就是說，有個要求需要辨識該資料夾的內容，而支援這個協定的 TDE 程式卻無法這樣" "做。" #: tdeio/global.cpp:819 msgid "Cyclic Link Detected" msgstr "偵測到循環連結" #: tdeio/global.cpp:820 msgid "" "UNIX environments are commonly able to link a file or folder to a separate " "name and/or location. TDE detected a link or series of links that results in " "an infinite loop - i.e. the file was (perhaps in a roundabout way) linked to " "itself." msgstr "" "在 UNIX 環境下，通常可以把檔案或資料夾連結至其他的名稱或位置。 TDE 偵測到一個" "或一系列的連結，形成無限循環──也就是說， 該檔案直接或間接地連結回自己。" #: tdeio/global.cpp:824 tdeio/global.cpp:846 msgid "" "Delete one part of the loop in order that it does not cause an infinite " "loop, and try again." msgstr "請刪除該循環的一部份，以斷開這個無限循環，再重試。" #: tdeio/global.cpp:833 msgid "Request Aborted By User" msgstr "要求已被使用者中止了" #: tdeio/global.cpp:834 tdeio/global.cpp:1127 msgid "The request was not completed because it was aborted." msgstr "該要求尚未完成，因為已被中止了。" #: tdeio/global.cpp:836 tdeio/global.cpp:1030 tdeio/global.cpp:1129 msgid "Retry the request." msgstr "重試要求。" #: tdeio/global.cpp:840 msgid "Cyclic Link Detected During Copy" msgstr "複製時偵測到循環連結" #: tdeio/global.cpp:841 msgid "" "UNIX environments are commonly able to link a file or folder to a separate " "name and/or location. During the requested copy operation, TDE detected a " "link or series of links that results in an infinite loop - i.e. the file was " "(perhaps in a roundabout way) linked to itself." msgstr "" "在 UNIX 環境下，通常可以把檔案或資料夾連結至其他的名稱或位置。 正當進行要求的" "複製動作時，TDE 偵測到一個或一系列的連結， 形成無限循環──也就是說，該檔案直接" "或間接地連結回自己。" #: tdeio/global.cpp:851 msgid "Could Not Create Network Connection" msgstr "無法建立網路連線" #: tdeio/global.cpp:852 msgid "Could Not Create Socket" msgstr "無法建立 Socket" #: tdeio/global.cpp:853 msgid "" "This is a fairly technical error in which a required device for network " "communications (a socket) could not be created." msgstr "" "這是一個相當技術性的錯誤，無法建立所需的網路通訊裝置 (socket, 承接口)。" #: tdeio/global.cpp:855 tdeio/global.cpp:968 tdeio/global.cpp:979 #: tdeio/global.cpp:988 msgid "" "The network connection may be incorrectly configured, or the network " "interface may not be enabled." msgstr "可能是網路連線設定不正確，或是網路介面未啟動。" #: tdeio/global.cpp:861 msgid "Connection to Server Refused" msgstr "連線到伺服器被拒絕" #: tdeio/global.cpp:862 msgid "" "The server %1 refused to allow this computer to make a " "connection." msgstr "伺服器 %1 拒絕了這部電腦的連線請求。" #: tdeio/global.cpp:864 msgid "" "The server, while currently connected to the Internet, may not be configured " "to allow requests." msgstr "該伺服器雖然在網際網路上，但可能設定為不允許外來的連線請求。" #: tdeio/global.cpp:866 msgid "" "The server, while currently connected to the Internet, may not be running " "the requested service (%1)." msgstr "該伺服器雖然在網際網路上，但是可能沒有執行所需的服務 (%1)。" #: tdeio/global.cpp:868 msgid "" "A network firewall (a device which restricts Internet requests), either " "protecting your network or the network of the server, may have intervened, " "preventing this request." msgstr "" "可能有個保護您的網路或伺服器的網路的防火牆 (限制網際網路請求的裝置) 干預，妨" "礙了這個要求。" #: tdeio/global.cpp:875 msgid "Connection to Server Closed Unexpectedly" msgstr "往伺服器的連線意外地關閉了" #: tdeio/global.cpp:876 msgid "" "Although a connection was established to %1, the connection " "was closed at an unexpected point in the communication." msgstr "" "雖然往 %1 的連線已經設立了，但通訊其間這個連線意外地中斷了。" #: tdeio/global.cpp:879 msgid "" "A protocol error may have occurred, causing the server to close the " "connection as a response to the error." msgstr "可能發生了一個協定錯誤，導致伺服器回應錯誤而關閉連線。" #: tdeio/global.cpp:885 msgid "URL Resource Invalid" msgstr "無效的 URL 資源" #: tdeio/global.cpp:886 msgid "Protocol %1 is not a Filter Protocol" msgstr "該協定 %1 不是一個過濾協定" #: tdeio/global.cpp:887 msgid "" "The Uniform Resource Locator (URL) that you entered did not refer to a valid mechanism of " "accessing the specific resource, %1%2." msgstr "" "您輸入的 Uniform Resource Locator (URL) 並不指向有效的機制，無法存取特定的資源 %1%2。" #: tdeio/global.cpp:892 msgid "" "TDE is able to communicate through a protocol within a protocol. This " "request specified a protocol be used as such, however this protocol is not " "capable of such an action. This is a rare event, and is likely to indicate a " "programming error." msgstr "" "TDE 能夠在一個協定裡透過另一個協定進行通訊。現在要求指定該協定用作這種過濾用" "途，但該協定不能用作過濾用途。這個錯誤比較罕見，大概是編程出錯了。" #: tdeio/global.cpp:900 msgid "Unable to Initialize Input/Output Device" msgstr "無法初始化輸入/輸出裝置" #: tdeio/global.cpp:901 msgid "Could Not Mount Device" msgstr "無法裝載裝置" #: tdeio/global.cpp:902 msgid "" "The requested device could not be initialized (\"mounted\"). The reported " "error was: %1" msgstr "" "無法初始化 (裝載, mount) 您所要求的裝置。報告的錯誤是：%1" #: tdeio/global.cpp:905 msgid "" "The device may not be ready, for example there may be no media in a " "removable media device (i.e. no CD-ROM in a CD drive), or in the case of a " "peripheral/portable device, the device may not be correctly connected." msgstr "" "該裝置可能未就緒，例如某抽取式媒體裝置裡可能沒有媒體 (光碟機裡沒有光碟)，或" "者，對週邊/可攜式裝置而言，可能該裝置的連線不正確。" #: tdeio/global.cpp:909 msgid "" "You may not have permissions to initialize (\"mount\") the device. On UNIX " "systems, often system administrator privileges are required to initialize a " "device." msgstr "" "您可能沒有權限初始化 (裝載, mount) 該裝置。在 UNIX 系統上，通常需要系統管理員" "的權限，才能初始化裝置。" #: tdeio/global.cpp:913 msgid "" "Check that the device is ready; removable drives must contain media, and " "portable devices must be connected and powered on.; and try again." msgstr "" "請檢查該裝置是否就緒：抽取式磁碟機或光碟機裡必須有媒體，而可攜式裝置必須已連" "接和打開電源；再重試。" #: tdeio/global.cpp:919 msgid "Unable to Uninitialize Input/Output Device" msgstr "無法反初始化輸入/輸出裝置" #: tdeio/global.cpp:920 msgid "Could Not Unmount Device" msgstr "無法卸載裝置" #: tdeio/global.cpp:921 msgid "" "The requested device could not be uninitialized (\"unmounted\"). The " "reported error was: %1" msgstr "" "無法反初始化 (卸載, ummount) 您所要求的裝置。報告的錯誤是：%1" #: tdeio/global.cpp:924 msgid "" "The device may be busy, that is, still in use by another application or " "user. Even such things as having an open browser window on a location on " "this device may cause the device to remain in use." msgstr "" "該裝置可能正在忙碌中，也就是說，可能有使用者或應用程式仍然在使用它。儘管只是" "有個開啟了的瀏覽器視窗在該裝置的某個位置上，也足以使該裝置停留在使用中狀態。" #: tdeio/global.cpp:928 msgid "" "You may not have permissions to uninitialize (\"unmount\") the device. On " "UNIX systems, system administrator privileges are often required to " "uninitialize a device." msgstr "" "您可能沒有權限反初始化 (卸載, ummount) 該裝置。在 UNIX 系統上，通常需要系統管" "理員的權限，才能初始化裝置。" #: tdeio/global.cpp:932 msgid "Check that no applications are accessing the device, and try again." msgstr "檢查沒有應用程式正在存取該裝置，再重試。" #: tdeio/global.cpp:937 msgid "Cannot Read From Resource" msgstr "無法讀入資源" #: tdeio/global.cpp:938 msgid "" "This means that although the resource, %1, was able to be " "opened, an error occurred while reading the contents of the resource." msgstr "" "這就是說，雖然 %1 這個資源可以開啟，但讀入這個資源的內容時發" "生錯誤。" #: tdeio/global.cpp:941 msgid "You may not have permissions to read from the resource." msgstr "您可能沒有權限讀入該資源。" #: tdeio/global.cpp:950 msgid "Cannot Write to Resource" msgstr "無法寫入資源" #: tdeio/global.cpp:951 msgid "" "This means that although the resource, %1, was able to be " "opened, an error occurred while writing to the resource." msgstr "" "這就是說，雖然 %1 這個資源可以開啟，但寫入這個資源時發生錯" "誤。" #: tdeio/global.cpp:954 msgid "You may not have permissions to write to the resource." msgstr "您可能沒有權限寫入該資源。" #: tdeio/global.cpp:963 tdeio/global.cpp:974 msgid "Could Not Listen for Network Connections" msgstr "無法聽候網路連線" #: tdeio/global.cpp:964 msgid "Could Not Bind" msgstr "無法 Bind" #: tdeio/global.cpp:965 tdeio/global.cpp:976 msgid "" "This is a fairly technical error in which a required device for network " "communications (a socket) could not be established to listen for incoming " "network connections." msgstr "" "這是一個相當技術性的錯誤，無法設立所需的網路通訊裝置 (socket, 承接口) 以聽候 " "(listen) 內進的網路連線。" #: tdeio/global.cpp:975 msgid "Could Not Listen" msgstr "無法聽候" #: tdeio/global.cpp:985 msgid "Could Not Accept Network Connection" msgstr "無法接受網路連線" #: tdeio/global.cpp:986 msgid "" "This is a fairly technical error in which an error occurred while attempting " "to accept an incoming network connection." msgstr "這是一個相當技術性的錯誤，試圖接受 (accept) 內進的網路連線時發生錯誤。" #: tdeio/global.cpp:990 msgid "You may not have permissions to accept the connection." msgstr "您可能沒有權限接受該連線。" #: tdeio/global.cpp:995 #, c-format msgid "Could Not Login: %1" msgstr "無法登入：%1" #: tdeio/global.cpp:996 msgid "" "An attempt to login to perform the requested operation was unsuccessful." msgstr "剛試圖登入以執行要求的作業，但不成功。" #: tdeio/global.cpp:1007 msgid "Could Not Determine Resource Status" msgstr "無法查詢資源狀態" #: tdeio/global.cpp:1008 msgid "Could Not Stat Resource" msgstr "無法查詢資源狀態" #: tdeio/global.cpp:1009 msgid "" "An attempt to determine information about the status of the resource " "%1, such as the resource name, type, size, etc., was unsuccessful." msgstr "" "剛試圖查詢關於資源 %1 狀態的資訊，例如資源名稱、類型、大小等" "等，但不成功。" #: tdeio/global.cpp:1012 msgid "The specified resource may not have existed or may not be accessible." msgstr "指定的資源可能不存在或無法存取。" #: tdeio/global.cpp:1020 msgid "Could Not Cancel Listing" msgstr "無法取消內容列表" #: tdeio/global.cpp:1021 msgid "FIXME: Document this" msgstr "FIXME: Document this, 尚未為此項目寫說明文件" #: tdeio/global.cpp:1025 msgid "Could Not Create Folder" msgstr "無法建立資料夾" #: tdeio/global.cpp:1026 msgid "An attempt to create the requested folder failed." msgstr "剛試圖建立要求的資料夾，但失敢了。" #: tdeio/global.cpp:1027 msgid "The location where the folder was to be created may not exist." msgstr "要建立資料夾的位置可能不存在。" #: tdeio/global.cpp:1034 msgid "Could Not Remove Folder" msgstr "無法移除資料夾" #: tdeio/global.cpp:1035 msgid "An attempt to remove the specified folder, %1, failed." msgstr "剛試圖移除指定的資料夾， %1，但失敢了。" #: tdeio/global.cpp:1037 msgid "The specified folder may not exist." msgstr "指定的資料夾可能不存在。" #: tdeio/global.cpp:1038 msgid "The specified folder may not be empty." msgstr "指定的資料夾可能不是空的。" #: tdeio/global.cpp:1041 msgid "Ensure that the folder exists and is empty, and try again." msgstr "請確定該資料夾存在，而且是空的，再重試。" #: tdeio/global.cpp:1046 msgid "Could Not Resume File Transfer" msgstr "無法恢復檔案傳送" #: tdeio/global.cpp:1047 msgid "" "The specified request asked that the transfer of file %1 be " "resumed at a certain point of the transfer. This was not possible." msgstr "" "在傳送檔案 %1 中途時，指定要求重新繼續傳送的請求。這是不可能" "的。" #: tdeio/global.cpp:1050 msgid "The protocol, or the server, may not support file resuming." msgstr "此通訊協定或伺服器可能不支援檔案續傳。" #: tdeio/global.cpp:1052 msgid "Retry the request without attempting to resume transfer." msgstr "重新連線而不重複使用之前的連線。" #: tdeio/global.cpp:1057 msgid "Could Not Rename Resource" msgstr "無法重新命名資源" #: tdeio/global.cpp:1058 msgid "An attempt to rename the specified resource %1 failed." msgstr "剛試圖重新命名指定的資源 %1，但失敗了。" #: tdeio/global.cpp:1066 msgid "Could Not Alter Permissions of Resource" msgstr "無法變更資源的權限" #: tdeio/global.cpp:1067 msgid "" "An attempt to alter the permissions on the specified resource %1 failed." msgstr "剛試圖變更指定的資源 %1 的權限，但失敗了。" #: tdeio/global.cpp:1074 msgid "Could Not Delete Resource" msgstr "無法刪除資源" #: tdeio/global.cpp:1075 msgid "An attempt to delete the specified resource %1 failed." msgstr "剛試圖刪除指定的資源 %1，但失敗了。" #: tdeio/global.cpp:1082 msgid "Unexpected Program Termination" msgstr "非預期的程式終止。" #: tdeio/global.cpp:1083 msgid "" "The program on your computer which provides access to the %1 protocol has unexpectedly terminated." msgstr "在您的電腦上提供 %1 協定存取的程式意外地突然終止了。" #: tdeio/global.cpp:1091 msgid "Out of Memory" msgstr "記憶體不足" #: tdeio/global.cpp:1092 msgid "" "The program on your computer which provides access to the %1 protocol could not obtain the memory required to continue." msgstr "" "在您的電腦上提供 %1 協定存取的程式未能取得所需的記憶體，無法" "繼續。" #: tdeio/global.cpp:1100 msgid "Unknown Proxy Host" msgstr "不明的代理伺服器主機" #: tdeio/global.cpp:1101 msgid "" "While retrieving information about the specified proxy host, %1, an Unknown Host error was encountered. An unknown host error " "indicates that the requested name could not be located on the Internet." msgstr "" "當抓取特定的 proxy 主機 %1 時，發生找不到主機的錯誤。該錯誤" "通常代表該主機名稱在網際網路上找不到。" #: tdeio/global.cpp:1105 msgid "" "There may have been a problem with your network configuration, specifically " "your proxy's hostname. If you have been accessing the Internet with no " "problems recently, this is unlikely." msgstr "" "您的網路設定可能有問題，特別是您的 proxy 主機名稱。如果您最近曾經很正常的使用" "網路，那一定有問題。" #: tdeio/global.cpp:1109 msgid "Double-check your proxy settings and try again." msgstr "請再三檢查您的代理伺服器設定，然後再重試。" #: tdeio/global.cpp:1114 msgid "Authentication Failed: Method %1 Not Supported" msgstr "授權失敗：不支援 %1 認證方式" #: tdeio/global.cpp:1116 #, c-format msgid "" "Although you may have supplied the correct authentication details, the " "authentication failed because the method that the server is using is not " "supported by the TDE program implementing the protocol %1." msgstr "" "隨然您或許還沒有提供正確的授權方式，這次授權動作已經失敗了。這樣因為伺服器所" "提供的授權方式，TDE 程式所實做的 %1 協定中並不支援。" #: tdeio/global.cpp:1120 #, fuzzy msgid "" "Please file a bug at http://bugs." "trinitydesktop.org/ to inform the TDE team of the unsupported " "authentication method." msgstr "" "請在 http://bugs.trinitydesktop." "org/ 做一個錯誤登記，以便告知 TDE 團隊這個不被支援的驗證方式。" #: tdeio/global.cpp:1126 msgid "Request Aborted" msgstr "要求中止" #: tdeio/global.cpp:1133 msgid "Internal Error in Server" msgstr "伺服器內部錯誤" #: tdeio/global.cpp:1134 msgid "" "The program on the server which provides access to the %1 " "protocol has reported an internal error: %0." msgstr "伺服器上提供 %1 協定的存取的程式報告內部錯誤：%0。" #: tdeio/global.cpp:1137 msgid "" "This is most likely to be caused by a bug in the server program. Please " "consider submitting a full bug report as detailed below." msgstr "" "這大概是因為該伺服器程式內部有錯誤。請考慮依照下列指示提交完整的錯誤報告。" #: tdeio/global.cpp:1140 msgid "Contact the administrator of the server to advise them of the problem." msgstr "請聯繫伺服器的管理員，報告這個問題。" #: tdeio/global.cpp:1142 msgid "" "If you know who the authors of the server software are, submit the bug " "report directly to them." msgstr "如果您知道誰是該伺服器軟體的作者，請直接把錯誤報告提交給他們。" #: tdeio/global.cpp:1147 msgid "Timeout Error" msgstr "逾時錯誤" #: tdeio/global.cpp:1148 msgid "" "Although contact was made with the server, a response was not received " "within the amount of time allocated for the request as follows:" "
          • Timeout for establishing a connection: %1 seconds
          • Timeout " "for receiving a response: %2 seconds
          • Timeout for accessing proxy " "servers: %3 seconds
          Please note that you can alter these timeout " "settings in the TDE Control Center, by selecting Network -> Preferences." msgstr "" "雖然已經與伺服器聯繫，但在配置給該要求的限定時間內，未收到伺服器的回應，細節" "如下：
          • 設立連線逾時時限：%1 秒
          • 接收回應逾時時限：%2 秒
          • 存取代理伺服器逾時時限：%3 秒
          註：您可以在 TDE 控制中心，選" "擇 [網路] -> [偏好設定]，以變更這些逾時時限設定。" #: tdeio/global.cpp:1159 msgid "The server was too busy responding to other requests to respond." msgstr "伺服器太忙碌回應其他請求，所以暫時未能回應您的請求。" #: tdeio/global.cpp:1165 msgid "Unknown Error" msgstr "不明的錯誤" #: tdeio/global.cpp:1166 msgid "" "The program on your computer which provides access to the %1 protocol has reported an unknown error: %2." msgstr "" "您的電腦上，提供 %1 協定的存取的程式，報告了一個不明的錯誤：" "%2。" #: tdeio/global.cpp:1174 msgid "Unknown Interruption" msgstr "不明的中斷" #: tdeio/global.cpp:1175 msgid "" "The program on your computer which provides access to the %1 protocol has reported an interruption of an unknown type: %2." msgstr "" "您的電腦上，提供 %1 協定的存取的程式，報告了一種類型不明的中" "斷：%2。" #: tdeio/global.cpp:1183 msgid "Could Not Delete Original File" msgstr "無法刪除原本的檔案" #: tdeio/global.cpp:1184 msgid "" "The requested operation required the deleting of the original file, most " "likely at the end of a file move operation. The original file %1 could not be deleted." msgstr "" "要求的作業需要刪除原本的檔案，多數是移動檔案時最後一個動作。可是，現在無法刪" "除原本的檔案 %1。" #: tdeio/global.cpp:1193 msgid "Could Not Delete Temporary File" msgstr "無法刪除暫存檔案" #: tdeio/global.cpp:1194 msgid "" "The requested operation required the creation of a temporary file in which " "to save the new file while being downloaded. This temporary file %1 could not be deleted." msgstr "" "要求的作業需要建立一個暫存檔案，以儲存下載中的新檔案。可是，現在無法刪除該暫" "存檔案 %1。" #: tdeio/global.cpp:1203 msgid "Could Not Rename Original File" msgstr "無法重新命名原本檔案" #: tdeio/global.cpp:1204 msgid "" "The requested operation required the renaming of the original file " "%1, however it could not be renamed." msgstr "" "要求的作業需要重新命名原本的檔案 %1，然而現在卻無法為它重新" "命名。" #: tdeio/global.cpp:1212 msgid "Could Not Rename Temporary File" msgstr "無法重新命名暫存檔案" #: tdeio/global.cpp:1213 msgid "" "The requested operation required the creation of a temporary file " "%1, however it could not be created." msgstr "" "要求的作業需要建立一個暫存檔案 %1，然而現在無法建立該暫存檔" "案。" #: tdeio/global.cpp:1221 msgid "Could Not Create Link" msgstr "無法建立連結" #: tdeio/global.cpp:1222 msgid "Could Not Create Symbolic Link" msgstr "無法建立符號連結" #: tdeio/global.cpp:1223 msgid "The requested symbolic link %1 could not be created." msgstr "要求的符號連結 %1 無法建立。" #: tdeio/global.cpp:1230 msgid "No Content" msgstr "無內容" #: tdeio/global.cpp:1235 msgid "Disk Full" msgstr "磁碟已滿" #: tdeio/global.cpp:1236 msgid "" "The requested file %1 could not be written to as there is " "inadequate disk space." msgstr "要求的檔案 %1 無法寫入，因為磁碟空間不足。" #: tdeio/global.cpp:1238 msgid "" "Free up enough disk space by 1) deleting unwanted and temporary files; 2) " "archiving files to removable media storage such as CD-Recordable discs; or " "3) obtain more storage capacity." msgstr "" "請以下列方法釋放足夠的磁碟空間： 1) 刪除不需的或暫存的檔案； 2) 把檔案歸檔至" "抽取式媒體存儲，例如 CD-R 可燒錄光碟； 3) 取得更多存儲容量。" #: tdeio/global.cpp:1245 msgid "Source and Destination Files Identical" msgstr "來源跟目的都是同一個檔案" #: tdeio/global.cpp:1246 msgid "" "The operation could not be completed because the source and destination " "files are the same file." msgstr "無法完成作業，因為來源跟目的都是同一個檔案。" #: tdeio/global.cpp:1248 msgid "Choose a different filename for the destination file." msgstr "請為目的檔案選擇另一個檔名。" #: tdeio/global.cpp:1259 msgid "Undocumented Error" msgstr "未有說明的錯誤" #: tdeio/job.cpp:3263 tdeio/job.cpp:3780 msgid "Already Exists as Folder" msgstr "已存在以此為名的資料夾" #: tdeio/kdcopservicestarter.cpp:64 #, c-format msgid "No service implementing %1" msgstr "沒有服務實作 %1" #: tdeio/kdirlister.cpp:296 tdeio/kdirlister.cpp:307 tdeio/krun.cpp:977 #: tdeio/paste.cpp:213 tdeio/renamedlg.cpp:433 #, c-format msgid "" "Malformed URL\n" "%1" msgstr "" "不正確的 URL\n" "%1" #: tdeio/kimageio.cpp:231 msgid "All Pictures" msgstr "所有圖片" #: tdeio/kmimetype.cpp:110 msgid "No mime types installed." msgstr "沒有安裝 MIME 類型。" #: tdeio/kmimetype.cpp:136 #, c-format msgid "" "Could not find mime type\n" "%1" msgstr "" "找不到 MIME 類型\n" "%1" #: tdeio/kmimetype.cpp:798 msgid "The desktop entry file %1 has no Type=... entry." msgstr "桌面項目檔案 %1 中沒有 Type=... 項目。" #: tdeio/kmimetype.cpp:819 msgid "" "The desktop entry of type\n" "%1\n" "is unknown." msgstr "" "類型 %1 中的桌面\n" "項目\n" "無法辨識。" #: tdeio/kmimetype.cpp:833 tdeio/kmimetype.cpp:935 tdeio/kmimetype.cpp:1117 msgid "" "The desktop entry file\n" "%1\n" "is of type FSDevice but has no Dev=... entry." msgstr "" "桌面項目檔案\n" "%1\n" "為 FSDevice 類型，但沒有 Dev=... 項目。" #: tdeio/kmimetype.cpp:879 msgid "" "The desktop entry file\n" "%1\n" "is of type Link but has no URL=... entry." msgstr "" "桌面項目檔案\n" "%1\n" "為 Link 類型，但沒有 URL=... 項目。" #: tdeio/kmimetype.cpp:945 msgid "Mount" msgstr "裝載" #: tdeio/kmimetype.cpp:956 msgid "Eject" msgstr "退出" #: tdeio/kmimetype.cpp:958 msgid "Unmount" msgstr "卸載" #: tdeio/kmimetype.cpp:1075 msgid "" "The desktop entry file\n" "%1\n" " has an invalid menu entry\n" "%2." msgstr "" "桌面項目檔案\n" "%1\n" " 有一無效選單項目\n" "%2。" #: tdeio/kmimetypechooser.cpp:84 msgid "Patterns" msgstr "樣式" #: tdeio/kmimetypechooser.cpp:94 msgid "&Edit..." msgstr "編輯(&E)..." #: tdeio/kmimetypechooser.cpp:104 msgid "Click this button to display the familiar TDE mime type editor." msgstr "按這個按鈕來顯示熟悉的 TDE mime 類型編輯器。" #: tdeio/krun.cpp:128 msgid "" "Unable to enter %1.\n" "You do not have access rights to this location." msgstr "" "無法進入 %1。\n" "您沒有這個位置的存取權限。" #: tdeio/krun.cpp:173 msgid "" "The file %1 is an executable program. For safety it will not be " "started." msgstr "檔案 %1 是一個可執行的程式。為了安全將不會執行它。" #: tdeio/krun.cpp:180 msgid "You do not have permission to run %1." msgstr "您沒有執行 %1 的權限。" #: tdeio/krun.cpp:217 msgid "You are not authorized to open this file." msgstr "您未獲授權去開啟此檔案。" #: tdeio/krun.cpp:559 msgid "You are not authorized to execute this file." msgstr "您未獲授權去執行此檔案。" #: tdeio/krun.cpp:579 #, c-format msgid "Launching %1" msgstr "裝載 %1 中" #: tdeio/krun.cpp:774 msgid "You are not authorized to execute this service." msgstr "您未獲授權去執行此服務。" #: tdeio/krun.cpp:1014 msgid "" "Unable to run the command specified. The file or folder %1 does " "not exist." msgstr "無法執行指定的命令。這個檔案或資料夾 %1 不存在。" #: tdeio/krun.cpp:1536 msgid "Could not find the program '%1'" msgstr "找不到程式「%1」" #: tdeio/kscan.cpp:52 msgid "Acquire Image" msgstr "擷取影像" #: tdeio/kscan.cpp:95 msgid "OCR Image" msgstr "OCR 影像" #: tdeio/kservice.cpp:923 msgid "Updating System Configuration" msgstr "更新系統組態" #: tdeio/kservice.cpp:924 msgid "Updating system configuration." msgstr "更新系統組態。" #: tdeio/kshred.cpp:214 msgid "Shredding: pass %1 of 35" msgstr "強力刪除：正在進行 35 次中的第 %1 次刪除" #: tdeio/netaccess.cpp:67 msgid "File '%1' is not readable" msgstr "檔案「%1」無法讀取" #: tdeio/netaccess.cpp:461 msgid "ERROR: Unknown protocol '%1'" msgstr "錯誤：不明的協定「%1」。" #: tdeio/passdlg.cpp:57 msgid "Password" msgstr "密碼" #: tdeio/passdlg.cpp:98 msgid "You need to supply a username and a password" msgstr "您需要提供一組使用者名稱和密碼" #: tdeio/passdlg.cpp:125 msgid "&Password:" msgstr "密碼(&P)：" #: tdeio/passdlg.cpp:147 msgid "&Keep password" msgstr "保存密碼(&K)" #: tdeio/paste.cpp:49 tdeio/paste.cpp:115 msgid "Filename for clipboard content:" msgstr "剪貼簿內容的檔名：" #: tdeio/paste.cpp:108 msgid "%1 (%2)" msgstr "%1 (%2)" #: tdeio/paste.cpp:123 msgid "" "The clipboard has changed since you used 'paste': the chosen data format is " "no longer applicable. Please copy again what you wanted to paste." msgstr "" "當您使用「貼上」時剪貼簿已經改變了：所選擇的資料格式已經不適用了。請再次複製" "您所想要貼上的項目。" #: tdeio/paste.cpp:201 tdeio/paste.cpp:224 tdeio/paste.cpp:251 msgid "The clipboard is empty" msgstr "剪貼簿是空的" #: tdeio/paste.cpp:299 #, c-format msgid "" "_n: &Paste File\n" "&Paste %n Files" msgstr "貼上 %n 個檔案(&P)" #: tdeio/paste.cpp:301 #, c-format msgid "" "_n: &Paste URL\n" "&Paste %n URLs" msgstr "貼上 %n 個網址(&P)" #: tdeio/paste.cpp:303 msgid "&Paste Clipboard Contents" msgstr "貼上剪貼簿內容(&P)" #: tdeio/pastedialog.cpp:49 msgid "Data format:" msgstr "資料格式:" #: tdeio/renamedlg.cpp:119 msgid "&Rename" msgstr "重新命名(&R)" #: tdeio/renamedlg.cpp:121 msgid "Suggest New &Name" msgstr "建議的新名稱(&N)" #: tdeio/renamedlg.cpp:127 msgid "&Skip" msgstr "略過(&S)" #: tdeio/renamedlg.cpp:130 msgid "&Auto Skip" msgstr "自動略過(&A)" #: tdeio/renamedlg.cpp:135 msgid "&Overwrite" msgstr "覆寫(&O)" #: tdeio/renamedlg.cpp:139 msgid "O&verwrite All" msgstr "全部覆寫(&V)" #: tdeio/renamedlg.cpp:145 msgid "&Resume" msgstr "恢復(&R)" #: tdeio/renamedlg.cpp:150 msgid "R&esume All" msgstr "全部恢復(&E)" #: tdeio/renamedlg.cpp:161 msgid "" "This action would overwrite '%1' with itself.\n" "Please enter a new file name:" msgstr "" "此動作將覆寫「%1」它自己。\n" "請輸入新的檔案名稱：" #: tdeio/renamedlg.cpp:163 msgid "C&ontinue" msgstr "繼續(&O)" #: tdeio/renamedlg.cpp:232 tdeio/renamedlg.cpp:311 msgid "An older item named '%1' already exists." msgstr "舊項目中已經有一個叫做「%1」存在了。" #: tdeio/renamedlg.cpp:234 tdeio/renamedlg.cpp:313 msgid "A similar file named '%1' already exists." msgstr "另一個名為 %1 的同類檔案已經存在。" #: tdeio/renamedlg.cpp:236 tdeio/renamedlg.cpp:315 msgid "A newer item named '%1' already exists." msgstr "新項目中已經有一個叫做「%1」的存在了。" #: tdeio/renamedlg.cpp:248 tdeio/renamedlg.cpp:284 #, c-format msgid "size %1" msgstr "大小 %1" #: tdeio/renamedlg.cpp:256 tdeio/renamedlg.cpp:291 #, c-format msgid "created on %1" msgstr "建立於 %1" #: tdeio/renamedlg.cpp:263 tdeio/renamedlg.cpp:298 #, c-format msgid "modified on %1" msgstr "修改於 %1" #: tdeio/renamedlg.cpp:273 msgid "The source file is '%1'" msgstr "來源檔案是「%1」" #: tdeio/skipdlg.cpp:63 msgid "Skip" msgstr "略過" #: tdeio/skipdlg.cpp:66 msgid "Auto Skip" msgstr "自動略過" #: tdeio/slave.cpp:370 #, c-format msgid "Unable to create io-slave: %1" msgstr "無法建立 io-slave: %1" #: tdeio/slave.cpp:401 msgid "Unknown protocol '%1'." msgstr "不明的協定「%1」。" #: tdeio/slave.cpp:409 msgid "Can not find io-slave for protocol '%1'." msgstr "找不到「%1」協定的 io-slave 程式。" #: tdeio/slave.cpp:437 msgid "Cannot talk to tdelauncher" msgstr "無法與 tdelauncher 交談" #: tdeio/slave.cpp:448 #, c-format msgid "" "Unable to create io-slave:\n" "tdelauncher said: %1" msgstr "" "無法建立 io-slave:\n" "tdelauncher 回應: %1" #: tdeio/statusbarprogress.cpp:132 msgid " Stalled " msgstr " 停止 " #: tdeio/tcpslavebase.cpp:319 msgid "" "You are about to leave secure mode. Transmissions will no longer be " "encrypted.\n" "This means that a third party could observe your data in transit." msgstr "" "您即將離開安全模式，資料傳輸將不再被加密。\n" "這意味著第三方有可能查看到您傳輸的資料。" #: tdeio/tcpslavebase.cpp:325 tdeio/tcpslavebase.cpp:1089 msgid "Security Information" msgstr "安全性資訊" #: tdeio/tcpslavebase.cpp:326 msgid "C&ontinue Loading" msgstr "繼續載入(&O)" #: tdeio/tcpslavebase.cpp:677 msgid "Enter the certificate password:" msgstr "請輸入憑證密碼：" #: tdeio/tcpslavebase.cpp:678 msgid "SSL Certificate Password" msgstr "SSL 憑證密碼" #: tdeio/tcpslavebase.cpp:691 msgid "Unable to open the certificate. Try a new password?" msgstr "無法開啟憑證。要試用新的密碼嗎？" #: tdeio/tcpslavebase.cpp:704 msgid "The procedure to set the client certificate for the session failed." msgstr "為本次協議所設定的客戶端憑證失敗。" #: tdeio/tcpslavebase.cpp:877 msgid "" "The IP address of the host %1 does not match the one the certificate was " "issued to." msgstr "主機 %1 的 IP 位址與憑證原先發行給的位址不相符。" #: tdeio/tcpslavebase.cpp:882 tdeio/tcpslavebase.cpp:890 #: tdeio/tcpslavebase.cpp:925 tdeio/tcpslavebase.cpp:999 #: tdeio/tcpslavebase.cpp:1011 tdeio/tcpslavebase.cpp:1020 #: tdeio/tcpslavebase.cpp:1051 msgid "Server Authentication" msgstr "伺服端認證" #: tdeio/tcpslavebase.cpp:883 tdeio/tcpslavebase.cpp:891 #: tdeio/tcpslavebase.cpp:1021 msgid "&Details" msgstr "詳細資料(&D)" #: tdeio/tcpslavebase.cpp:884 tdeio/tcpslavebase.cpp:892 msgid "Co&ntinue" msgstr "繼續(&N)" #: tdeio/tcpslavebase.cpp:886 tdeio/tcpslavebase.cpp:1016 msgid "The server certificate failed the authenticity test (%1)." msgstr "此伺服器憑證未能通過認證測試 (%1)。" #: tdeio/tcpslavebase.cpp:922 tdeio/tcpslavebase.cpp:1048 msgid "" "Would you like to accept this certificate forever without being prompted?" msgstr "您希望以後不提示就接受該憑證嗎？" #: tdeio/tcpslavebase.cpp:926 tdeio/tcpslavebase.cpp:1052 msgid "&Forever" msgstr "永遠(&F)" #: tdeio/tcpslavebase.cpp:927 tdeio/tcpslavebase.cpp:1053 msgid "&Current Sessions Only" msgstr "只用於目前的工作階段(&C)" #: tdeio/tcpslavebase.cpp:998 msgid "" "You have indicated that you wish to accept this certificate, but it is not " "issued to the server who is presenting it. Do you wish to continue loading?" msgstr "" "您表示您想接受此憑證，但它並不是頒發給現在出示此憑證的伺服器。您真的要繼續載" "入嗎？" #: tdeio/tcpslavebase.cpp:1010 #, fuzzy msgid "" "SSL certificate is being rejected as requested. You can disable this in the " "Trinity Control Center." msgstr "如您所要求的，SSL 憑證正被拒絕。您可以在 TDE 控制中心停用這項設定。" #: tdeio/tcpslavebase.cpp:1022 msgid "Co&nnect" msgstr "連線(&N)" #: tdeio/tcpslavebase.cpp:1078 msgid "" "You are about to enter secure mode. All transmissions will be encrypted " "unless otherwise noted.\n" "This means that no third party will be able to easily observe your data in " "transit." msgstr "" "您即將進入安全模式。所有的傳輸將被加密除非有其他通知。\n" "這代表沒有其他軟體可以輕易得到您傳輸的資料。" #: tdeio/tcpslavebase.cpp:1090 msgid "Display SSL &Information" msgstr "顯示 SSL 資訊(&I)" #: tdeio/tcpslavebase.cpp:1092 msgid "C&onnect" msgstr "連線(&O)" #: tdeio/tdefileitem.cpp:904 msgid "Symbolic Link" msgstr "符號連結" #: tdeio/tdefileitem.cpp:906 msgid "%1 (Link)" msgstr "%1 (連結)" #: tdeio/tdefileitem.cpp:953 msgid "Link to %1 (%2)" msgstr "連結至 %1 (%2)" #: tdeio/tdefileitem.cpp:972 msgid "Owner:" msgstr "擁有者:" #: tdeio/tdefileitem.cpp:973 msgid "Permissions:" msgstr "權限：" #: tdeio/tdefilemetainfo.cpp:844 msgid "s" msgstr "秒" #: tdeio/tdefilemetainfo.cpp:847 msgid "ms" msgstr "毫秒" #: tdeio/tdefilemetainfo.cpp:850 msgid "bps" msgstr "bps" #: tdeio/tdefilemetainfo.cpp:853 msgid "pixels" msgstr "像素" #: tdeio/tdefilemetainfo.cpp:856 msgid "in" msgstr "英吋" #: tdeio/tdefilemetainfo.cpp:859 msgid "cm" msgstr "公分" #: tdeio/tdefilemetainfo.cpp:862 msgid "B" msgstr "B" #: tdeio/tdefilemetainfo.cpp:865 msgid "KB" msgstr "KB" #: tdeio/tdefilemetainfo.cpp:868 msgid "fps" msgstr "fps" #: tdeio/tdefilemetainfo.cpp:871 msgid "dpi" msgstr "dpi" #: tdeio/tdefilemetainfo.cpp:874 msgid "bpp" msgstr "bpp" #: tdeio/tdefilemetainfo.cpp:877 msgid "Hz" msgstr "Hz" #: tdeio/tdefilemetainfo.cpp:880 msgid "mm" msgstr "mm" #: tdeioexec/main.cpp:50 msgid "TDEIO Exec - Opens remote files, watches modifications, asks for upload" msgstr "TDEIO Exec - 開啟遠端檔案，監控修改動作，要求上傳" #: tdeioexec/main.cpp:54 msgid "Treat URLs as local files and delete them afterwards" msgstr "將網址視為本地檔案並隨後將之刪除" #: tdeioexec/main.cpp:55 msgid "Suggested file name for the downloaded file" msgstr "下載檔案的建議檔名" #: tdeioexec/main.cpp:56 msgid "Command to execute" msgstr "要執行的指令" #: tdeioexec/main.cpp:57 msgid "URL(s) or local file(s) used for 'command'" msgstr "給「command」使用的網址或本地檔案" #: tdeioexec/main.cpp:73 msgid "'command' expected.\n" msgstr "預期的「command」。\n" #: tdeioexec/main.cpp:102 msgid "" "The URL %1\n" "is malformed" msgstr "" "網址「%1」\n" "的格式不正確。" #: tdeioexec/main.cpp:104 msgid "" "Remote URL %1\n" "not allowed with --tempfiles switch" msgstr "" "遠端網址 %1\n" "無法使用 --tempfiles 開關" #: tdeioexec/main.cpp:237 msgid "" "The supposedly temporary file\n" "%1\n" "has been modified.\n" "Do you still want to delete it?" msgstr "" "假定的暫存檔案\n" "%1\n" "已經被修改過了。\n" "您要仍然要刪除它嗎？" #: tdeioexec/main.cpp:238 tdeioexec/main.cpp:245 msgid "File Changed" msgstr "檔案已變更" #: tdeioexec/main.cpp:238 msgid "Do Not Delete" msgstr "不要刪除" #: tdeioexec/main.cpp:244 msgid "" "The file\n" "%1\n" "has been modified.\n" "Do you want to upload the changes?" msgstr "" "檔案\n" "%1\n" "已經被修改了。\n" "你想要上傳這些變更嗎？" #: tdeioexec/main.cpp:245 msgid "Upload" msgstr "上傳" #: tdeioexec/main.cpp:245 msgid "Do Not Upload" msgstr "不要上傳" #: tdeioexec/main.cpp:274 msgid "KIOExec" msgstr "KIOExec" #: tests/kurifiltertest.cpp:144 msgid "kurifiltertest" msgstr "kurifiltertest" #: tests/kurifiltertest.cpp:145 msgid "Unit test for the URI filter plugin framework." msgstr "URI 過濾外掛程式架構的單位測試。" #: tests/kurifiltertest.cpp:150 msgid "Use space as keyword delimeter for web shortcuts" msgstr "使用空白作為網頁捷徑的關鍵字分隔" #: ../tdeioslave/file/file.cpp:565 ../tdeioslave/file/file.cpp:799 #, c-format msgid "" "Could not change permissions for\n" "%1" msgstr "" "無法變更該權限\n" "%1" #: ../tdeioslave/file/file.cpp:731 msgid "Cannot copy file from %1 to %2. (Errno: %3)" msgstr "無法複製檔案從 %1 到 %2（錯誤代碼：%3）" #: ../tdeioslave/file/file.cpp:1210 #, c-format msgid "No media in device for %1" msgstr "沒有 %1 的媒體於裝置中" #: ../tdeioslave/file/file.cpp:1385 msgid "No Media inserted or Media not recognized." msgstr "沒有插入媒體，或無法辨認媒體。" #: ../tdeioslave/file/file.cpp:1395 ../tdeioslave/file/file.cpp:1604 msgid "\"vold\" is not running." msgstr "\"vold\"未執行。" #: ../tdeioslave/file/file.cpp:1429 msgid "Could not find program \"mount\"" msgstr "找不到 mount 程式" #: ../tdeioslave/file/file.cpp:1617 msgid "Could not find program \"umount\"" msgstr "找不到 umount 程式" #: ../tdeioslave/file/file.cpp:1801 #, c-format msgid "Could not read %1" msgstr "無法讀取 %1" #: ../tdeioslave/ftp/ftp.cpp:450 #, c-format msgid "Opening connection to host %1" msgstr "開啟連線到主機 %1" #: ../tdeioslave/ftp/ftp.cpp:468 #, c-format msgid "Connected to host %1" msgstr "連線到主機 %1" #: ../tdeioslave/ftp/ftp.cpp:517 msgid "" "%1.\n" "\n" "Reason: %2" msgstr "" "%1.\n" "\n" "原因： %2" #: ../tdeioslave/ftp/ftp.cpp:540 msgid "Sending login information" msgstr "送出登入資訊" #: ../tdeioslave/ftp/ftp.cpp:587 msgid "" "Message sent:\n" "Login using username=%1 and password=[hidden]\n" "\n" "Server replied:\n" "%2\n" "\n" msgstr "" "送出的訊息：\n" "以使用者名稱=%1 和密碼=[hidden] 登入\n" "\n" "伺服器回應：\n" "%2\n" "\n" #: ../tdeioslave/ftp/ftp.cpp:595 ../tdeioslave/http/http.cpp:5203 msgid "You need to supply a username and a password to access this site." msgstr "您必須提供一組使用者名稱和密碼來存取這個網站。" #: ../tdeioslave/ftp/ftp.cpp:597 ../tdeioslave/http/http.cpp:5211 msgid "Site:" msgstr "網站:" #: ../tdeioslave/ftp/ftp.cpp:598 msgid "%1" msgstr "%1" #: ../tdeioslave/ftp/ftp.cpp:661 msgid "Login OK" msgstr "登入成功" #: ../tdeioslave/ftp/ftp.cpp:690 #, c-format msgid "Could not login to %1." msgstr "無法登入 %1。" #: ../tdeioslave/http/http.cpp:489 msgid "No host specified." msgstr "沒有指定主機。" #: ../tdeioslave/http/http.cpp:1582 msgid "Otherwise, the request would have succeeded." msgstr "否則，該請求就已經成功了。" #: ../tdeioslave/http/http.cpp:1586 msgid "retrieve property values" msgstr "接收屬性數值" #: ../tdeioslave/http/http.cpp:1589 msgid "set property values" msgstr "設定屬性數值" #: ../tdeioslave/http/http.cpp:1592 msgid "create the requested folder" msgstr "建立所請求的資料夾" #: ../tdeioslave/http/http.cpp:1595 msgid "copy the specified file or folder" msgstr "複製指定的檔案或資料夾" #: ../tdeioslave/http/http.cpp:1598 msgid "move the specified file or folder" msgstr "搬移指定的檔案或資料夾" #: ../tdeioslave/http/http.cpp:1601 msgid "search in the specified folder" msgstr "在指定的資料夾搜尋" #: ../tdeioslave/http/http.cpp:1604 msgid "lock the specified file or folder" msgstr "鎖住指定的檔案或資料夾" #: ../tdeioslave/http/http.cpp:1607 msgid "unlock the specified file or folder" msgstr "解除鎖定指定的檔案或資料夾" #: ../tdeioslave/http/http.cpp:1610 msgid "delete the specified file or folder" msgstr "刪除指定的檔案或資料夾" #: ../tdeioslave/http/http.cpp:1613 msgid "query the server's capabilities" msgstr "查詢伺服器的性能" #: ../tdeioslave/http/http.cpp:1616 msgid "retrieve the contents of the specified file or folder" msgstr "接收所指定的檔案或資料夾的內容" #: ../tdeioslave/http/http.cpp:1628 ../tdeioslave/http/http.cpp:1781 msgid "An unexpected error (%1) occurred while attempting to %2." msgstr "在連線到 %2 發生了無預期的錯誤 (%1)。" #: ../tdeioslave/http/http.cpp:1636 msgid "The server does not support the WebDAV protocol." msgstr "對方伺服器並不支援 WebDAV 通訊協定。" #: ../tdeioslave/http/http.cpp:1677 msgid "" "An error occurred while attempting to %1, %2. A summary of the reasons is " "below.
            " msgstr "在連線到 %1，%2 時發生錯誤。錯誤原因如下。
              " #: ../tdeioslave/http/http.cpp:1689 ../tdeioslave/http/http.cpp:1792 #, c-format msgid "Access was denied while attempting to %1." msgstr "連線到 %1 被拒絕，存取失敗。" #: ../tdeioslave/http/http.cpp:1696 msgid "The specified folder already exists." msgstr "所指定的資料夾已經存在。" #: ../tdeioslave/http/http.cpp:1702 ../tdeioslave/http/http.cpp:1797 msgid "" "A resource cannot be created at the destination until one or more " "intermediate collections (folders) have been created." msgstr "資源無法在目標被建立，直到一個或多個中間集合(資料夾)已經被建立之後。" #: ../tdeioslave/http/http.cpp:1711 #, c-format msgid "" "The server was unable to maintain the liveness of the properties listed in " "the propertybehavior XML element or you attempted to overwrite a file while " "requesting that files are not overwritten. %1" msgstr "" "伺服器無法維護列表在在屬性行為的 XML 元素中的屬性的生存或是您試圖在不被覆寫的" "檔案裡覆寫一個檔案。 %1" #: ../tdeioslave/http/http.cpp:1721 #, c-format msgid "The requested lock could not be granted. %1" msgstr "發出的鎖定請求無法被許可。%1" #: ../tdeioslave/http/http.cpp:1727 msgid "The server does not support the request type of the body." msgstr "伺服器並不支援請求內容的類型。" #: ../tdeioslave/http/http.cpp:1732 ../tdeioslave/http/http.cpp:1804 msgid "Unable to %1 because the resource is locked." msgstr "無法連線到 %1，因為資源被鎖定，所以無法進行。" #: ../tdeioslave/http/http.cpp:1736 msgid "This action was prevented by another error." msgstr "該動作被另外一個錯誤所阻止。" #: ../tdeioslave/http/http.cpp:1743 ../tdeioslave/http/http.cpp:1809 msgid "" "Unable to %1 because the destination server refuses to accept the file or " "folder." msgstr "無法連線到 %1，因為對方伺服器拒絕接收該檔案或資料夾。" #: ../tdeioslave/http/http.cpp:1750 ../tdeioslave/http/http.cpp:1815 msgid "" "The destination resource does not have sufficient space to record the state " "of the resource after the execution of this method." msgstr "目標資源需的空間並不足以紀錄在執行這個方式之後的資源狀態" #: ../tdeioslave/http/http.cpp:1772 #, c-format msgid "upload %1" msgstr "上傳 %1" #: ../tdeioslave/http/http.cpp:2093 msgid "Connecting to %1..." msgstr "連線到 %1..." #: ../tdeioslave/http/http.cpp:2111 ../tdeioslave/http/http.cpp:2115 msgid "Proxy %1 at port %2" msgstr "代理伺服器 %1 埠號 %2" #: ../tdeioslave/http/http.cpp:2141 msgid "Connection was to %1 at port %2" msgstr "到主機 %1 埠號 %2 的連線" #: ../tdeioslave/http/http.cpp:2147 msgid "%1 (port %2)" msgstr "%1 (埠號 %2)" #: ../tdeioslave/http/http.cpp:2676 msgid "%1 contacted. Waiting for reply..." msgstr "%1 已聯繫上。等待回應中..." #: ../tdeioslave/http/http.cpp:3044 msgid "Server processing request, please wait..." msgstr "伺服器產生請求中，請稍後..." #: ../tdeioslave/http/http.cpp:3920 msgid "Requesting data to send" msgstr "要送出的請求資料" #: ../tdeioslave/http/http.cpp:3961 #, c-format msgid "Sending data to %1" msgstr "送出資料至 %1" #: ../tdeioslave/http/http.cpp:4380 msgid "Retrieving %1 from %2..." msgstr "從 %2 接收 %1 資料..." #: ../tdeioslave/http/http.cpp:4389 msgid "Retrieving from %1..." msgstr "正在從 %1 接收資料..." #: ../tdeioslave/http/http.cpp:5183 ../tdeioslave/http/http.cpp:5331 msgid "Authentication Failed." msgstr "認證失敗。" #: ../tdeioslave/http/http.cpp:5186 ../tdeioslave/http/http.cpp:5334 msgid "Proxy Authentication Failed." msgstr "代理伺服器認證失敗。" #: ../tdeioslave/http/http.cpp:5212 ../tdeioslave/http/http.cpp:5229 msgid "%1 at %2" msgstr "%1 在 %2" #: ../tdeioslave/http/http.cpp:5219 msgid "" "You need to supply a username and a password for the proxy server listed " "below before you are allowed to access any sites." msgstr "" "您必須為下列的代理伺服器提供一組使用者名稱和密碼，才能夠取得存取網站的權限。" #: ../tdeioslave/http/http.cpp:5228 msgid "Proxy:" msgstr "代理伺服器:" #: ../tdeioslave/http/http.cpp:5250 msgid "Authentication needed for %1 but authentication is disabled." msgstr "%1 需要驗證但是驗證已停用。" #: ../tdeioslave/http/http.cpp:5872 msgid "" "Unsupported method: authentication will fail. Please submit a bug report." msgstr "不支援的方法：驗證將會失敗。請傳送一個錯誤回報。" #: ../tdeioslave/http/http_cache_cleaner.cpp:53 #: ../tdeioslave/http/http_cache_cleaner.cpp:194 msgid "TDE HTTP cache maintenance tool" msgstr "TDE HTTP 快取維修工具" #: ../tdeioslave/http/http_cache_cleaner.cpp:59 msgid "Empty the cache" msgstr "清空快取" #: ../tdeioslave/http/kcookiejar/kcookiewin.cpp:80 msgid "Cookie Alert" msgstr "Cookie 警告" #: ../tdeioslave/http/kcookiejar/kcookiewin.cpp:112 #, c-format msgid "" "_n: You received a cookie from\n" "You received %n cookies from" msgstr "您接收到 %n 個 cookies，來自於" #: ../tdeioslave/http/kcookiejar/kcookiewin.cpp:129 msgid " [Cross Domain!]" msgstr " [交互網域！]" #: ../tdeioslave/http/kcookiejar/kcookiewin.cpp:132 msgid "Do you want to accept or reject?" msgstr "您要接受或拒絕？" #: ../tdeioslave/http/kcookiejar/kcookiewin.cpp:143 msgid "Apply Choice To" msgstr "套用選擇到" #: ../tdeioslave/http/kcookiejar/kcookiewin.cpp:146 msgid "&Only this cookie" msgstr "只接受這個 cookie(&O)" #: ../tdeioslave/http/kcookiejar/kcookiewin.cpp:146 msgid "&Only these cookies" msgstr "只接受這些 cookies(&O)" #: ../tdeioslave/http/kcookiejar/kcookiewin.cpp:149 msgid "" "Select this option to accept/reject only this cookie. You will be prompted " "if another cookie is received. (see WebBrowsing/Cookies in the Control " "Center)." msgstr "" "選擇這個選項來接受或拒絕這個 cookie。在收到另外一個 cookie，您會被再次提示。 " "(參照「控制中心」裡的「網頁瀏覽/Cookies」)。" #: ../tdeioslave/http/kcookiejar/kcookiewin.cpp:154 msgid "All cookies from this do&main" msgstr "所有從這個網域傳來的 cookie(&M)" #: ../tdeioslave/http/kcookiejar/kcookiewin.cpp:156 msgid "" "Select this option to accept/reject all cookies from this site. Choosing " "this option will add a new policy for the site this cookie originated from. " "This policy will be permanent until you manually change it from the Control " "Center (see WebBrowsing/Cookies in the Control Center)." msgstr "" "選擇這個選項來接受或拒絕所有從這個站來的 cookies。選擇這個選項將會新增原則到" "這個 cookie 的來源站台。這個原則將會固定直到您自己手動從控制中心改變它。" "(參照「控制中心」裡的「網頁瀏覽/Cookies」)。" #: ../tdeioslave/http/kcookiejar/kcookiewin.cpp:163 msgid "All &cookies" msgstr "所有的 cookie(&C)" #: ../tdeioslave/http/kcookiejar/kcookiewin.cpp:165 msgid "" "Select this option to accept/reject all cookies from anywhere. Choosing this " "option will change the global cookie policy set in the Control Center for " "all cookies (see WebBrowsing/Cookies in the Control Center)." msgstr "" "選擇這個選項來接受/拒絕所有的 cookies 不論從那來。 選擇這個選項將會改變在控制" "中心給所有 cookies 的通用 cookie 原則。(參照「控制中心」裡的「網頁瀏覽/" "Cookies」)。" #: ../tdeioslave/http/kcookiejar/kcookiewin.cpp:182 msgid "&Accept" msgstr "接受(&A)" #: ../tdeioslave/http/kcookiejar/kcookiewin.cpp:187 msgid "&Reject" msgstr "拒絕(&R)" #: ../tdeioslave/http/kcookiejar/kcookiewin.cpp:197 #: ../tdeioslave/http/kcookiejar/kcookiewin.cpp:228 msgid "&Details <<" msgstr "詳細資料(&D) <<" #: ../tdeioslave/http/kcookiejar/kcookiewin.cpp:197 #: ../tdeioslave/http/kcookiejar/kcookiewin.cpp:220 msgid "&Details >>" msgstr "詳細資料(&D) >>" #: ../tdeioslave/http/kcookiejar/kcookiewin.cpp:201 msgid "See or modify the cookie information" msgstr "顯示或修改 cookie 資訊" #: ../tdeioslave/http/kcookiejar/kcookiewin.cpp:263 msgid "Cookie Details" msgstr "Cookie 詳細資料" #: ../tdeioslave/http/kcookiejar/kcookiewin.cpp:278 msgid "Value:" msgstr "值:" #: ../tdeioslave/http/kcookiejar/kcookiewin.cpp:285 msgid "Expires:" msgstr "到期時間:" #: ../tdeioslave/http/kcookiejar/kcookiewin.cpp:292 msgid "Path:" msgstr "路徑:" #: ../tdeioslave/http/kcookiejar/kcookiewin.cpp:299 msgid "Domain:" msgstr "網域:" #: ../tdeioslave/http/kcookiejar/kcookiewin.cpp:306 msgid "Exposure:" msgstr "曝露:" #: ../tdeioslave/http/kcookiejar/kcookiewin.cpp:315 msgid "" "_: Next cookie\n" "&Next >>" msgstr "下一個(&N) >>" #: ../tdeioslave/http/kcookiejar/kcookiewin.cpp:320 msgid "Show details of the next cookie" msgstr "顯示下一個 cookie 的詳細資料" #: ../tdeioslave/http/kcookiejar/kcookiewin.cpp:353 msgid "Not specified" msgstr "沒有指定" #: ../tdeioslave/http/kcookiejar/kcookiewin.cpp:362 msgid "End of Session" msgstr "工作階段結束" #: ../tdeioslave/http/kcookiejar/kcookiewin.cpp:367 msgid "Secure servers only" msgstr "只使用安全性伺服器" #: ../tdeioslave/http/kcookiejar/kcookiewin.cpp:369 msgid "Secure servers, page scripts" msgstr "安全性伺服器，頁面命令稿" #: ../tdeioslave/http/kcookiejar/kcookiewin.cpp:374 msgid "Servers" msgstr "伺服器" #: ../tdeioslave/http/kcookiejar/kcookiewin.cpp:376 msgid "Servers, page scripts" msgstr "伺服器，頁面命令稿" #: ../tdeioslave/http/kcookiejar/main.cpp:30 msgid "HTTP Cookie Daemon" msgstr "HTTP Cookie 常駐程式" #: ../tdeioslave/http/kcookiejar/main.cpp:36 msgid "Shut down cookie jar" msgstr "關閉 cookie jar" #: ../tdeioslave/http/kcookiejar/main.cpp:37 msgid "Remove cookies for domain" msgstr "移除該網域的所有 cookies" #: ../tdeioslave/http/kcookiejar/main.cpp:38 msgid "Remove all cookies" msgstr "移除所有的 cookies" #: ../tdeioslave/http/kcookiejar/main.cpp:39 msgid "Reload configuration file" msgstr "重新載入組態檔案" #: ../tdeioslave/http/kcookiejar/main.cpp:46 msgid "HTTP cookie daemon" msgstr "HTTP Cookie 常駐程式" #: ../tdeioslave/iso/tdeiso_info.cpp:37 msgid "TDE utility for getting ISO information" msgstr "" #: ../tdeioslave/iso/tdeiso_info.cpp:43 msgid "Returns 0 if the file exists, -1 if it does not" msgstr "" #: ../tdeioslave/iso/tdeiso_info.cpp:44 msgid "" "The device on which to execute the specified command. Example: /dev/sr0" msgstr "" #: ../tdeioslave/iso/tdeiso_info.cpp:50 #, fuzzy msgid "TDE ISO information utility" msgstr "TDE SSL 資訊" #: ../tdeioslave/iso/tdeiso_info.cpp:93 #, fuzzy msgid "No device was specified" msgstr "沒有指定檔案" #: ../tdeioslave/metainfo/metainfo.cpp:99 #, c-format msgid "No metainfo for %1" msgstr "沒有 %1 的 meta 資訊" #: kssl/keygenwizard.ui:25 #, no-c-format msgid "" "You have indicated that you wish to obtain or purchase a secure certificate. " "This wizard is intended to guide you through the procedure. You may cancel " "at any time, and this will abort the transaction." msgstr "" "您已指明您想要取得或者購買安全性憑證。此精靈將會引導您完成這個過程。您可在任" "何時候取消，從而中止此項事務。" #: kssl/keygenwizard2.ui:25 #, no-c-format msgid "" "You must now provide a password for the certificate request. Please choose a " "very secure password as this will be used to encrypt your private key." msgstr "" "您現在必須就為憑證請求提供一個密碼。請選擇非常安全的密碼，因為該密碼會用來加" "密您的私人密鑰。" #: kssl/keygenwizard2.ui:38 #, no-c-format msgid "&Repeat password:" msgstr "再次輸入密碼(&R)：" #: kssl/keygenwizard2.ui:49 #, no-c-format msgid "&Choose password:" msgstr "選擇密碼(&C)：" #: misc/tdewalletd/kbetterthankdialogbase.ui:60 #, no-c-format msgid "Allow &Once" msgstr "允許一次(&O)" #: misc/tdewalletd/kbetterthankdialogbase.ui:71 #, no-c-format msgid "Allow &Always" msgstr "允許永遠使用(&A)" #: misc/tdewalletd/kbetterthankdialogbase.ui:79 #, no-c-format msgid "&Deny" msgstr "拒絕(&D)" #: misc/tdewalletd/kbetterthankdialogbase.ui:87 #, no-c-format msgid "Deny &Forever" msgstr "永遠拒絕(&F)" #: misc/tdewalletd/tdewalletwizard.ui:16 #, no-c-format msgid "TDE Wallet Wizard" msgstr "TDE 錢包服務" #: misc/tdewalletd/tdewalletwizard.ui:23 #, no-c-format msgid "Introduction" msgstr "介紹" #: misc/tdewalletd/tdewalletwizard.ui:56 #, no-c-format msgid "TDEWallet - The TDE Wallet System" msgstr "TDEWallet - TDE 錢包系統" #: misc/tdewalletd/tdewalletwizard.ui:81 #, no-c-format msgid "" "Welcome to TDEWallet, the TDE Wallet System. TDEWallet allows you to store " "your passwords and other personal information on disk in an encrypted file, " "preventing others from viewing the information. This wizard will tell you " "about TDEWallet and help you configure it for the first time." msgstr "" "歡迎使用 TDEWallet，TDE 的錢包系統。TDEWallet 讓您可以將您的密碼和其他個人資" "訊以加密檔案的形式儲存在磁碟上，防止別人檢視這些資訊。這個精靈會告訴您關於 " "TDEWallet 並且協助您做初次的設定。" #: misc/tdewalletd/tdewalletwizard.ui:112 #, no-c-format msgid "&Basic setup (recommended)" msgstr "基本設定[建議的](&B)" #: misc/tdewalletd/tdewalletwizard.ui:123 #, no-c-format msgid "&Advanced setup" msgstr "進階設定(&A)" #: misc/tdewalletd/tdewalletwizard.ui:180 #, no-c-format msgid "" "The TDE Wallet system stores your data in a wallet file on your local " "hard disk. The data is only written in encrypted form, presently using the " "blowfish algorithm with your password as the key. When a wallet is opened, " "the wallet manager application will launch and display an icon in the system " "tray. You can use this application to manage your wallets. It even permits " "you to drag wallets and wallet contents, allowing you to easily copy a " "wallet to a remote system." msgstr "" "TDE 錢包系統將您的資料儲存在本地磁碟上的 wallet 檔案。該資料只會以加密" "的形式寫入，目前是使用 blowfish 演算法（以您的密碼作為鑰匙）。當錢包開啟時，" "會執行錢包管理程式並在系統匣中顯示圖示。您可以使用這個應用程式來管理您的錢" "包。它甚至允許您拖放錢包和錢包的內容，讓您可以輕鬆的複製錢包到遠端系統。" #: misc/tdewalletd/tdewalletwizard.ui:193 #, no-c-format msgid "Password Selection" msgstr "密碼選擇" #: misc/tdewalletd/tdewalletwizard.ui:204 #, no-c-format msgid "" "Various applications may attempt to use the TDE wallet to store passwords or " "other information such as web form data and cookies. If you would like " "these applications to use the wallet, you must enable it now and choose a " "password. The password you choose cannot be recovered if it is lost, " "and will allow anyone who knows it to obtain all the information contained " "in the wallet." msgstr "" "許多應用程式可能嘗試使用 TDE 錢包來儲存密碼或者其他資訊，像是網頁表單資料和 " "cookies。如果您想要讓這些應用程式使用錢包，你必須現在啟用它並且選擇一個密碼。" "如果您所選擇的密碼遺失了是不能復原的，並且將會讓任何知道它的人得以獲得" "錢包中所包含的所有資訊。" #: misc/tdewalletd/tdewalletwizard.ui:234 #, no-c-format msgid "Enter a new password:" msgstr "請輸入新的密碼：" #: misc/tdewalletd/tdewalletwizard.ui:251 #, no-c-format msgid "Verify password:" msgstr "驗證密碼：" #: misc/tdewalletd/tdewalletwizard.ui:301 #, no-c-format msgid "Yes, I wish to use the TDE wallet to store my personal information." msgstr "是的，我希望使用 TDE 錢包來儲存我的個人資訊。" #: misc/tdewalletd/tdewalletwizard.ui:390 #, no-c-format msgid "Security Level" msgstr "安全等級" #: misc/tdewalletd/tdewalletwizard.ui:401 #, no-c-format msgid "" "The TDE Wallet system allows you to control the level of security of your " "personal data. Some of these settings do impact usability. While the " "default settings are generally acceptable for most users, you may wish to " "change some of them. You may further tune these settings from the TDEWallet " "control module." msgstr "" "TDE 錢包系統讓您可以控制您個人資料的安全等級。這些設定時有些非常有用。預設的" "設定值是適合大多數的使用者，但是您可能希望改變其中某些部分。您往後仍然可以從 " "TDEWallet 控制模組中來改變這些設定值。" #: misc/tdewalletd/tdewalletwizard.ui:432 #, no-c-format msgid "Store network passwords and local passwords in separate wallet files" msgstr "將網路密碼與本地端密碼儲存在不同的 wallet 檔案" #: misc/tdewalletd/tdewalletwizard.ui:440 #, no-c-format msgid "Automatically close idle wallets" msgstr "自動關閉閒置的錢包" #: tdefile/knotifywidgetbase.ui:91 #, no-c-format msgid "Events" msgstr "事件" #: tdefile/knotifywidgetbase.ui:117 #, no-c-format msgid "Quick Controls" msgstr "快速控制" #: tdefile/knotifywidgetbase.ui:128 #, no-c-format msgid "Apply to &all applications" msgstr "套用到所有應用程式(&A)" #: tdefile/knotifywidgetbase.ui:170 #, no-c-format msgid "Turn O&ff All" msgstr "全部關閉(&F)" #: tdefile/knotifywidgetbase.ui:173 tdefile/knotifywidgetbase.ui:184 #, no-c-format msgid "Allows you to change the behavior for all events at once" msgstr "允許您一次變更所有事件的行為" #: tdefile/knotifywidgetbase.ui:181 #, no-c-format msgid "Turn O&n All" msgstr "全部開啟(&N)" #: tdefile/knotifywidgetbase.ui:215 #, no-c-format msgid "Print a message to standard &error output" msgstr "列印訊息到標準錯誤輸出(&E)" #: tdefile/knotifywidgetbase.ui:223 #, no-c-format msgid "Show a &message in a pop-up window" msgstr "在快顯視窗中顯示訊息(&M)" #: tdefile/knotifywidgetbase.ui:231 #, no-c-format msgid "E&xecute a program:" msgstr "執行程式(&X):" #: tdefile/knotifywidgetbase.ui:247 #, no-c-format msgid "Play a &sound:" msgstr "播放音效(&S)：" #: tdefile/knotifywidgetbase.ui:258 #, no-c-format msgid "Test the Sound" msgstr "測試音效" #: tdefile/knotifywidgetbase.ui:268 #, no-c-format msgid "Mark &taskbar entry" msgstr "標記工作列項目(&T)" #: tdefile/knotifywidgetbase.ui:276 #, no-c-format msgid "&Log to a file:" msgstr "記錄到檔案(&L):" #: tdefile/knotifywidgetbase.ui:352 #, no-c-format msgid "&Use a passive window that does not interrupt other work" msgstr "使用一個不中斷其他作業的被動式視窗(&U)" #: tdefile/knotifywidgetbase.ui:378 #, no-c-format msgid "Less Options" msgstr "較少選項" #: tdefile/knotifywidgetbase.ui:406 #, no-c-format msgid "Player Settings" msgstr "播放器設定" #: tdefile/kpropertiesdesktopadvbase.ui:27 #, no-c-format msgid "Terminal" msgstr "終端" #: tdefile/kpropertiesdesktopadvbase.ui:58 #, no-c-format msgid "" "Check this option if the application you want to run is a text mode " "application or if you want the information that is provided by the terminal " "emulator window." msgstr "" "如果你想要執行的應用程式是文字模式應用程式或者您所要的資訊是由終端機模擬視窗" "提供的，請核取這個選項。" #: tdefile/kpropertiesdesktopadvbase.ui:80 #, no-c-format msgid "" "Check this option if the text mode application offers relevant information " "on exit. Keeping the terminal emulator open allows you to retrieve this " "information." msgstr "" "如果文字模式應用程式在結束時提供相關資訊，請核取這個選項。保持終端機模擬視窗" "開啟以便您取得這個資訊。" #: tdefile/kpropertiesdesktopadvbase.ui:109 #, no-c-format msgid "" "Check this option if you want to run this application with a different user " "id. Every process has a different user id associated with it. This id code " "determines file access and other permissions. The password of the user is " "required to use this option." msgstr "" "如果你想要以不同的使用者 id 來執行這個應用程式，請核取這個選項。每個程序都跟" "不同的使用者 id 相關聯。這個 id 代碼決定了檔案存取與其他的權限。使用這個選項" "需要該使用者的密碼。" #: tdefile/kpropertiesdesktopadvbase.ui:140 #, no-c-format msgid "Enter the user name you want to run the application as." msgstr "輸入你想要在這個應用程式使用的使用者名稱。" #: tdefile/kpropertiesdesktopadvbase.ui:148 #, no-c-format msgid "Enter the user name you want to run the application as here." msgstr "在這裡輸入你想要在這個應用程式使用的使用者名稱。" #: tdefile/kpropertiesdesktopadvbase.ui:158 #, no-c-format msgid "Startup" msgstr "啟動" #: tdefile/kpropertiesdesktopadvbase.ui:169 #, no-c-format msgid "Enable &launch feedback" msgstr "啟用執行回饋(&L)" #: tdefile/kpropertiesdesktopadvbase.ui:172 #, no-c-format msgid "" "Check this option if you want to make clear that your application has " "started. This visual feedback may appear as a busy cursor or in the taskbar." msgstr "" "如果你想要清楚您的應用程式是否已啟動，請核取這個選項。這個虛擬回饋可能顯示為" "忙碌的游標或者顯示在工作列中。" #: tdefile/kpropertiesdesktopadvbase.ui:180 #, no-c-format msgid "&Place in system tray" msgstr "置於系統匣(&P)" #: tdefile/kpropertiesdesktopadvbase.ui:183 #, no-c-format msgid "" "Check this option if you want to have a system tray handle for your " "application." msgstr "如果您想要系統匣處理您的應用程式，請核取這個選項。" #: tdefile/kpropertiesdesktopadvbase.ui:191 #, no-c-format msgid "&DCOP registration:" msgstr "&DCOP 註冊:" #: tdefile/kpropertiesdesktopadvbase.ui:200 #, no-c-format msgid "None" msgstr "無" #: tdefile/kpropertiesdesktopadvbase.ui:205 #, no-c-format msgid "Multiple Instances" msgstr "多重實體" #: tdefile/kpropertiesdesktopadvbase.ui:210 #, no-c-format msgid "Single Instance" msgstr "單一實體" #: tdefile/kpropertiesdesktopadvbase.ui:215 #, no-c-format msgid "Run Until Finished" msgstr "執行單元結束" #: tdefile/kpropertiesdesktopbase.ui:44 #, no-c-format msgid "&Supported file types:" msgstr "支援的檔案類型(&S):" #: tdefile/kpropertiesdesktopbase.ui:50 tdefile/kpropertiesdesktopbase.ui:93 #, no-c-format msgid "" "

              This list should show the types of file that your application can " "handle. This list is organized by mimetypes.

              \n" "

              MIME, Multipurpose Internet (e)Mail Extension, is a standard protocol for " "identifying the type of data based on filename extensions and correspondent " "mimetypes. Example: the \"bmp\" part that comes after the dot in " "flower.bmp indicates that it is a specific kind of image, image/x-bmp. To know which application should open each type of file, the system " "should be informed about the abilities of each application to handle these " "extensions and mimetypes.

              \n" "

              If you want to associate this application with one or more mimetypes that " "are not in this list, click on the button Add below. If there are one " "or more filetypes that this application cannot handle, you may want to " "remove them from the list clicking on the button Remove below.

              " msgstr "" "

              這個清單應該顯示您的應用程式可以處理的檔案類型。這個列表是依照 " "mime 類型 排列的。

              \n" "

              MIME，多用途網路郵件延伸功能，是一個以延伸檔名來辨識資料類型與對應的 " "mime 類型 的標準協定。 例如：在 flower.bmp 句點後面的「bmp」部份表示他" "是一種特定種類的圖片， image/x-bmp。要了解哪一個應用程式用來開啟哪種類" "型的檔案，系統需要了解每個應用程式可以處理這些延伸檔名以及 mime 類型的能力。" "

              \n" "

              如果你想要把這個應用程式關聯到一或多個列表中沒有的 mime 類型，請按下面的按" "鈕 加入。如果有一或多個此應用程式無法處理的檔案類型，您可能會想要按下" "面的 移除 按鈕來把它們從列表中移除。

              " #: tdefile/kpropertiesdesktopbase.ui:58 tdefile/kpropertiesmimetypebase.ui:36 #, no-c-format msgid "Mimetype" msgstr "Mime 類型" #: tdefile/kpropertiesdesktopbase.ui:69 tdefile/kpropertiesmimetypebase.ui:47 #, no-c-format msgid "Description" msgstr "描述" #: tdefile/kpropertiesdesktopbase.ui:103 #, no-c-format msgid "&Name:" msgstr "名稱(&N):" #: tdefile/kpropertiesdesktopbase.ui:109 tdefile/kpropertiesdesktopbase.ui:117 #, no-c-format msgid "" "Type the name you want to give to this application here. This application " "will appear under this name in the applications menu and in the panel." msgstr "" "在這裡輸入您想要給這個應用程式的名稱。這個應用程式在應用程式選單以及面板中會" "以此名稱出現。" #: tdefile/kpropertiesdesktopbase.ui:131 tdefile/kpropertiesdesktopbase.ui:139 #, no-c-format msgid "" "Type the description of this application, based on its use, here. Examples: " "a dial up application (KPPP) would be \"Dial up tool\"." msgstr "" "在這裡輸入這個應用程式的描述，可根據它的用途。例如：一個撥號應用程式 (KPPP) " "應該是「撥號工具」。" #: tdefile/kpropertiesdesktopbase.ui:147 #, no-c-format msgid "Comm&ent:" msgstr "備註(&E):" #: tdefile/kpropertiesdesktopbase.ui:153 tdefile/kpropertiesdesktopbase.ui:161 #, no-c-format msgid "Type any comment you think is useful here." msgstr "在這裡輸入任何您認為有幫助的註解。" #: tdefile/kpropertiesdesktopbase.ui:169 #, no-c-format msgid "Co&mmand:" msgstr "命令(&M):" #: tdefile/kpropertiesdesktopbase.ui:175 tdefile/kpropertiesdesktopbase.ui:194 #, no-c-format msgid "" "Type the command to start this application here.\n" "\n" "Following the command, you can have several place holders which will be " "replaced with the actual values when the actual program is run:\n" "%f - a single file name\n" "%F - a list of files; use for applications that can open several local files " "at once\n" "%u - a single URL\n" "%U - a list of URLs\n" "%d - the directory of the file to open\n" "%D - a list of directories\n" "%i - the icon\n" "%m - the mini-icon\n" "%c - the caption" msgstr "" "在這裡輸入啟動這個應用程式的指令。\n" "\n" "下列指令，你需要在實際程式執行時換上真實的數值：\n" "%f - 單一的檔案名稱\n" "%F - 檔案的清單；用在可以一次開啟多個本地檔案的應用程式\n" "%u - 單一的網址\n" "%U - 網址的清單\n" "%d - 要開啟的檔案的目錄\n" "%D - 目錄的清單\n" "%i - 圖示\n" "%m - 小型圖示\n" "%c - 說明" #: tdefile/kpropertiesdesktopbase.ui:216 #, no-c-format msgid "" "Click here to browse your file system in order to find the desired " "executable." msgstr "按這裡瀏覽您的檔案系統以找出想要的可執行檔。" #: tdefile/kpropertiesdesktopbase.ui:224 #, no-c-format msgid "&Work path:" msgstr "工作路徑(&W):" #: tdefile/kpropertiesdesktopbase.ui:230 tdefile/kpropertiesdesktopbase.ui:238 #, no-c-format msgid "Sets the working directory for your application." msgstr "設定您的應用程式的工作目錄。" #: tdefile/kpropertiesdesktopbase.ui:246 #, no-c-format msgid "Add..." msgstr "加入..." #: tdefile/kpropertiesdesktopbase.ui:249 #, no-c-format msgid "" "Click on this button if you want to add a type of file (mimetype) that your " "application can handle." msgstr "" "如果你想要加入您的應用程式可以處理的檔案類型（mime 類型），請按這個按鈕。" #: tdefile/kpropertiesdesktopbase.ui:277 #, no-c-format msgid "" "If you want to remove a type of file (mimetype) that your application cannot " "handle, select the mimetype in the list above and click on this button." msgstr "" "如果你想要移除您的應用程式不能處理的檔案類型（mime 類型），請在上面列表中選" "擇 mime 類型並且按這個按鈕。" #: tdefile/kpropertiesdesktopbase.ui:302 #, no-c-format msgid "Ad&vanced Options" msgstr "進階的選項(&V)" #: tdefile/kpropertiesdesktopbase.ui:305 #, no-c-format msgid "" "Click here to modify the way this application will run, launch feedback, " "DCOP options or to run it as a different user." msgstr "" "按這裡修改執行這個應用程式的方式，啟動回饋、 DCOP 選項或者以不同的使用者執行" "它。" #: tdefile/kpropertiesmimetypebase.ui:27 #, no-c-format msgid "Select one or more file types to add:" msgstr "選擇一個或多個要加入的檔案類型：" #: tdefile/kpropertiesmimetypebase.ui:60 #, no-c-format msgid "" "

              Select one or more types of file that your application can handle " "here. This list is organized by mimetypes.

              \n" "

              MIME, Multipurpose Internet (e)Mail Extension, is a standard protocol for " "identifying the type of data based on filename extensions and correspondent " "mimetypes. Example: the \"bmp\" part that comes after the dot in " "flower.bmp indicates that it is a specific kind of image, image/x-bmp. To know which application should open each type of file, the system " "should be informed about the abilities of each application to handle these " "extensions and mimetypes.

              " msgstr "" "

              從這裡選擇一或多個您的應用程式可以處理的檔案類型。這個列表是依照 " "mime 類型 排列的。

              \n" "

              MIME，多用途網路郵件延伸功能，是一個以延伸檔名來辨識資料類型與對應的 " "mime 類型 的標準協定。 例如：在 flower.bmp 句點後面的「bmp」部份表示他" "是一種特定種類的圖片， image/x-bmp。要了解哪一個應用程式用來開啟哪種類" "型的檔案，系統需要了解每個應用程式可以處理這些延伸檔名以及 mime 類型的能力。" #, fuzzy #~| msgid "Unknown Error" #~ msgid "Unknown unmount error." #~ msgstr "不明的錯誤" #, fuzzy #~ msgid "Desktop Search" #~ msgstr "桌面" #, fuzzy #~ msgid "Bookmarks" #~ msgstr "書籤" #, fuzzy #~ msgid "Properties" #~ msgstr "%1 的內容" #, fuzzy #~ msgid "Remove" #~ msgstr "移除項目(&R)" #, fuzzy #~ msgid "Cancel" #~ msgstr "取消工作" #, fuzzy #~ msgid "Open" #~ msgstr "開啟(&O)" #, fuzzy #~ msgid "Stop" #~ msgstr "已停止" #, fuzzy #~ msgid "Delete" #~ msgstr "刪除中" #, fuzzy #~ msgid "Reload" #~ msgstr "上傳" #, fuzzy #~ msgid "Information" #~ msgstr "TDE SSL 資訊" #, fuzzy #~ msgid "Default" #~ msgstr " (預設)" #, fuzzy #~ msgid "No" #~ msgstr "無" #~ msgid "Shared" #~ msgstr "共用" #~ msgid "" #~ "You may perform a search on the Internet for a TDE program (called a " #~ "tdeioslave or ioslave) which supports this protocol. Places to search " #~ "include http://kde-apps.org/ and http://freshmeat.net/." #~ msgstr "" #~ "您可以在網際網路上搜尋一個支援此通訊協定的 TDE 程式 (叫做 tdeioslave 或 " #~ "ioslave)。建議從 http://kde-apps.org/ 和 http://freshmeat.net/ 這兩個地" #~ "方搜尋。"