summaryrefslogtreecommitdiffstats
path: root/ubuntu/maverick/tdesdk/debian/man
diff options
context:
space:
mode:
Diffstat (limited to 'ubuntu/maverick/tdesdk/debian/man')
-rw-r--r--ubuntu/maverick/tdesdk/debian/man/adddebug.145
-rw-r--r--ubuntu/maverick/tdesdk/debian/man/build-progress.sh.156
-rw-r--r--ubuntu/maverick/tdesdk/debian/man/catalogmanager.166
-rw-r--r--ubuntu/maverick/tdesdk/debian/man/cheatmake.172
-rw-r--r--ubuntu/maverick/tdesdk/debian/man/create_cvsignore.142
-rw-r--r--ubuntu/maverick/tdesdk/debian/man/create_makefile.169
-rw-r--r--ubuntu/maverick/tdesdk/debian/man/create_makefiles.163
-rw-r--r--ubuntu/maverick/tdesdk/debian/man/cvs-clean.150
-rw-r--r--ubuntu/maverick/tdesdk/debian/man/cvs2dist.1201
-rw-r--r--ubuntu/maverick/tdesdk/debian/man/cvsaskpass.163
-rw-r--r--ubuntu/maverick/tdesdk/debian/man/cvsbackport.152
-rw-r--r--ubuntu/maverick/tdesdk/debian/man/cvscheck.1107
-rw-r--r--ubuntu/maverick/tdesdk/debian/man/cvsforwardport.152
-rw-r--r--ubuntu/maverick/tdesdk/debian/man/cvslastchange.159
-rw-r--r--ubuntu/maverick/tdesdk/debian/man/cvslastlog.139
-rw-r--r--ubuntu/maverick/tdesdk/debian/man/cvsrevertlast.138
-rw-r--r--ubuntu/maverick/tdesdk/debian/man/cvsservice.179
-rw-r--r--ubuntu/maverick/tdesdk/debian/man/cxxmetric.134
-rw-r--r--ubuntu/maverick/tdesdk/debian/man/demangle.157
-rw-r--r--ubuntu/maverick/tdesdk/debian/man/dprof2calltree.160
-rw-r--r--ubuntu/maverick/tdesdk/debian/man/extend_dmalloc.143
-rw-r--r--ubuntu/maverick/tdesdk/debian/man/extractattr.161
-rw-r--r--ubuntu/maverick/tdesdk/debian/man/extractrc.160
-rw-r--r--ubuntu/maverick/tdesdk/debian/man/findmissingcrystal.142
-rw-r--r--ubuntu/maverick/tdesdk/debian/man/fixkdeincludes.173
-rw-r--r--ubuntu/maverick/tdesdk/debian/man/fixuifiles.163
-rw-r--r--ubuntu/maverick/tdesdk/debian/man/hotshot2calltree.157
-rw-r--r--ubuntu/maverick/tdesdk/debian/man/kapptemplate.169
-rw-r--r--ubuntu/maverick/tdesdk/debian/man/kbabel.174
-rw-r--r--ubuntu/maverick/tdesdk/debian/man/kbabeldict.166
-rw-r--r--ubuntu/maverick/tdesdk/debian/man/kbugbuster.150
-rw-r--r--ubuntu/maverick/tdesdk/debian/man/kdedoc.142
-rw-r--r--ubuntu/maverick/tdesdk/debian/man/kdelnk2desktop.py.139
-rw-r--r--ubuntu/maverick/tdesdk/debian/man/kdemangen.pl.151
-rw-r--r--ubuntu/maverick/tdesdk/debian/man/kminspector.150
-rw-r--r--ubuntu/maverick/tdesdk/debian/man/kmmatch.152
-rw-r--r--ubuntu/maverick/tdesdk/debian/man/kmtrace.172
-rw-r--r--ubuntu/maverick/tdesdk/debian/man/kompare.179
-rw-r--r--ubuntu/maverick/tdesdk/debian/man/kuiviewer.165
-rw-r--r--ubuntu/maverick/tdesdk/debian/man/licensecheck.137
-rw-r--r--ubuntu/maverick/tdesdk/debian/man/makeobj.166
-rw-r--r--ubuntu/maverick/tdesdk/debian/man/memprof2calltree.136
-rw-r--r--ubuntu/maverick/tdesdk/debian/man/op2calltree.143
-rw-r--r--ubuntu/maverick/tdesdk/debian/man/package_crystalsvg.141
-rw-r--r--ubuntu/maverick/tdesdk/debian/man/png2mng.pl.149
-rw-r--r--ubuntu/maverick/tdesdk/debian/man/po2xml.140
-rw-r--r--ubuntu/maverick/tdesdk/debian/man/pprof2calltree.152
-rw-r--r--ubuntu/maverick/tdesdk/debian/man/pruneemptydirs.165
-rw-r--r--ubuntu/maverick/tdesdk/debian/man/qtdoc.150
-rw-r--r--ubuntu/maverick/tdesdk/debian/man/split2po.160
-rw-r--r--ubuntu/maverick/tdesdk/debian/man/swappo.144
-rw-r--r--ubuntu/maverick/tdesdk/debian/man/tdecachegrind.167
-rw-r--r--ubuntu/maverick/tdesdk/debian/man/tdekillall.136
-rw-r--r--ubuntu/maverick/tdesdk/debian/man/testkspy.146
-rw-r--r--ubuntu/maverick/tdesdk/debian/man/transxx.147
-rw-r--r--ubuntu/maverick/tdesdk/debian/man/umbrello.153
-rw-r--r--ubuntu/maverick/tdesdk/debian/man/xml2pot.145
-rw-r--r--ubuntu/maverick/tdesdk/debian/man/zonetab2pot.py.139
58 files changed, 0 insertions, 3328 deletions
diff --git a/ubuntu/maverick/tdesdk/debian/man/adddebug.1 b/ubuntu/maverick/tdesdk/debian/man/adddebug.1
deleted file mode 100644
index d78dad43c..000000000
--- a/ubuntu/maverick/tdesdk/debian/man/adddebug.1
+++ /dev/null
@@ -1,45 +0,0 @@
-.\" Hey, EMACS: -*- nroff -*-
-.\" First parameter, NAME, should be all caps
-.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
-.\" other parameters are allowed: see man(7), man(1)
-.TH ADDDEBUG 1 "January 31, 2004"
-.\" Please adjust this date whenever revising the manpage.
-.\"
-.\" Some roff macros, for reference:
-.\" .nh disable hyphenation
-.\" .hy enable hyphenation
-.\" .ad l left justify
-.\" .ad b justify to both left and right margins
-.\" .nf disable filling
-.\" .fi enable filling
-.\" .br insert line break
-.\" .sp <n> insert n+1 empty lines
-.\" for manpage-specific macros, see man(7)
-.SH NAME
-adddebug \- modifies Makefile(s) to add debug info
-.SH SYNOPSIS
-.B adddebug
-.RB "[ " \-k " ] [ " \-n " ] [ " \-r " ]"
-.SH DESCRIPTION
-\fBadddebug\fP modifies the \fIMakefile\fP in the current directory
-(and optionally in its subdirectories) to add debug info (\fI\-g3\fP).
-It will also remove optimisations (\fI\-O[1-9]?\fP), and can optionally
-remove \fI\-DNDEBUG\fP and \fI\-DNO_DEBUG\fP as well.
-.PP
-This utility is part of the TDE Software Development Kit.
-.SH OPTIONS
-.TP
-.B \-k
-Keep optimisations (do not remove \fI\-O[1-9]?\fP flags which are
-removed by default).
-.TP
-.B \-n
-Compile without \fINDEBUG\fP and \fINO_DEBUG\fP being defined (this
-makes kdDebug calls work).
-.TP
-.B \-r
-Recursively search through all subdirectories of the current directory
-and operate on every Makefile that is found.
-.SH AUTHOR
-This manual page was prepared by Ben Burton <bab@debian.org>
-for the Debian GNU/Linux system (but may be used by others).
diff --git a/ubuntu/maverick/tdesdk/debian/man/build-progress.sh.1 b/ubuntu/maverick/tdesdk/debian/man/build-progress.sh.1
deleted file mode 100644
index 28c9d9016..000000000
--- a/ubuntu/maverick/tdesdk/debian/man/build-progress.sh.1
+++ /dev/null
@@ -1,56 +0,0 @@
-.\" Hey, EMACS: -*- nroff -*-
-.\" First parameter, NAME, should be all caps
-.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
-.\" other parameters are allowed: see man(7), man(1)
-.TH BUILD-PROGRESS.SH 1 "June 16, 2004"
-.\" Please adjust this date whenever revising the manpage.
-.\"
-.\" Some roff macros, for reference:
-.\" .nh disable hyphenation
-.\" .hy enable hyphenation
-.\" .ad l left justify
-.\" .ad b justify to both left and right margins
-.\" .nf disable filling
-.\" .fi enable filling
-.\" .br insert line break
-.\" .sp <n> insert n+1 empty lines
-.\" for manpage-specific macros, see man(7)
-.SH NAME
-build-progress.sh \- show kde-build progress in your konsole/xterm title bar
-.SH SYNOPSIS
-.B build-progress.sh
-.SH DESCRIPTION
-\fBbuild-progress.sh\fP can be used to watch the progress of a large TDE
-build in the title bar of your konsole or xterm.
-.PP
-The TDE build must be running elsewhere as a separate process, and it
-must be done using
-.BR kde-build (1).
-.PP
-When you run build-progress.sh, it will sit in a permanent loop while
-kde-build runs. The title bar of the konsole/xterm in which you ran
-build-progress.sh will be continually updated with the directory in
-which the TDE build is currently working.
-.PP
-You must run build-progress.sh from the top-level directory of the TDE
-build tree. This directory must contain a file named
-\fIkde-buildrc\fP (which is also used by kde-build). This
-\fIkde-buildrc\fP must contain valid settings for
-\fITDELOGDIR\fP and \fITDESRCDIR\fP, or else build-progress.sh will
-fail to work.
-.PP
-This utility is part of the TDE Software Development Kit.
-.SH FILES
-.TP
-\fIkde-buildrc\fP
-This file must be contained in the current directory, which must be the
-root of the TDE build tree. See
-.BR kde-build (1)
-for further information.
-.SH SEE ALSO
-.BR kde-build (1).
-.SH AUTHOR
-build-progress.sh was written by Malte Starostik <malte@kde.org> and others.
-.br
-This manual page was prepared by Ben Burton <bab@debian.org>
-for the Debian GNU/Linux system (but may be used by others).
diff --git a/ubuntu/maverick/tdesdk/debian/man/catalogmanager.1 b/ubuntu/maverick/tdesdk/debian/man/catalogmanager.1
deleted file mode 100644
index db8b17613..000000000
--- a/ubuntu/maverick/tdesdk/debian/man/catalogmanager.1
+++ /dev/null
@@ -1,66 +0,0 @@
-.\" Hey, EMACS: -*- nroff -*-
-.\" First parameter, NAME, should be all caps
-.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
-.\" other parameters are allowed: see man(7), man(1)
-.TH CATALOGMANAGER 1 "March 19, 2005"
-.\" Please adjust this date whenever revising the manpage.
-.\"
-.\" Some roff macros, for reference:
-.\" .nh disable hyphenation
-.\" .hy enable hyphenation
-.\" .ad l left justify
-.\" .ad b justify to both left and right margins
-.\" .nf disable filling
-.\" .fi enable filling
-.\" .br insert line break
-.\" .sp <n> insert n+1 empty lines
-.\" for manpage-specific macros, see man(7)
-.SH NAME
-catalogmanager \- advanced catalog manager for KBabel
-.SH SYNOPSIS
-.B catalogmanager
-.RI "[ " generic-options " ]"
-[ \fB\-\-project\fP \fIconfig-file\fP ]
-.SH DESCRIPTION
-\fBCatalogManager\fP is part of a suite of programs for editing gettext
-message files (PO-files). This suite is designed to help you translate fast
-and consistently.
-.PP
-This suite includes KBabel, CatalogManager and KBabelDict. KBabel is an
-advanced and easy to use PO-file editor with full navigational and editing
-capabilities, syntax checking and statistics. CatalogManager (this program)
-is a multi functional catalog manager which allows you to keep track of many
-PO-files at once. KBabelDict is a dictionary to assist with searching
-for common translations.
-.PP
-This utility is part of the TDE Software Development Kit.
-.SH OPTIONS
-Below are the catalogmanager-specific options.
-For a full summary of options, run \fIcatalogmanager \-\-help\fP.
-.TP
-\fB\-\-project\fP \fIconfig-file\fP
-Load the configuration from the given file.
-.SH SEE ALSO
-.BR kbabel (1),
-.BR kbabeldict (1).
-.PP
-Full user documentation for KBabel is available through the TDE Help Centre.
-You can also enter the URL
-\fIhelp:/kbabel/\fP
-directly into konqueror or you can run
-`\fIkhelpcenter help:/kbabel/\fP'
-from the command-line.
-.PP
-If the TDE Help Centre is not installed then you can install the package
-\fItdesdk-doc-html\fP and read this documentation in HTML format from
-\fI/usr/share/doc/tde/HTML/en/kbabel/\fP.
-.SH AUTHOR
-KBabel was written by Matthias Kiefer <kiefer@kde.org>,
-Wolfram Diestel <wolfram@steloj.de>, Andrea Rizzi <rizzi@kde.org>,
-Stanislav Visnovsky <visnovsky@kde.org>, Marco Wegner <dubbleu@web.de>,
-Asgeir Frimannsson <asgeirf@redhat.com>,
-Dwayne Bailey <dwayne@translate.org.za>,
-Bram Schoenmakers <bramschoenmakers@kde.nl> and others.
-.br
-This manual page was prepared by Ben Burton <bab@debian.org>
-for the Debian GNU/Linux system (but may be used by others).
diff --git a/ubuntu/maverick/tdesdk/debian/man/cheatmake.1 b/ubuntu/maverick/tdesdk/debian/man/cheatmake.1
deleted file mode 100644
index 098449a0b..000000000
--- a/ubuntu/maverick/tdesdk/debian/man/cheatmake.1
+++ /dev/null
@@ -1,72 +0,0 @@
-.\" Hey, EMACS: -*- nroff -*-
-.\" First parameter, NAME, should be all caps
-.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
-.\" other parameters are allowed: see man(7), man(1)
-.TH CHEATMAKE 1 "September 27, 2002"
-.\" Please adjust this date whenever revising the manpage.
-.\"
-.\" Some roff macros, for reference:
-.\" .nh disable hyphenation
-.\" .hy enable hyphenation
-.\" .ad l left justify
-.\" .ad b justify to both left and right margins
-.\" .nf disable filling
-.\" .fi enable filling
-.\" .br insert line break
-.\" .sp <n> insert n+1 empty lines
-.\" for manpage-specific macros, see man(7)
-.SH NAME
-cheatmake \- fool make into not rebuilding certain files
-.SH SYNOPSIS
-.B cheatmake hidechange
-.I file
-.br
-.B cheatmake show
-.br
-.B cheatmake why
-.I file
-.SH DESCRIPTION
-\fBcheatmake\fP is used to save time when recompiling. It can fool \fBmake\fP
-into skipping files that haven't changed in a meaningful way. This can be
-used for instance when you change a comment in a file but none of the actual
-code.
-.PP
-This utility is part of the TDE Software Development Kit.
-.SH OPTIONS
-The different modes of operation are as follows.
-.TP
-\fBhidechange\fP \fIfile\fP
-Hides the fact that the given file has changed by moving its timestamp
-back into the past. Use this option with care!
-.TP
-\fBshow\fP
-Lists which files make currently needs to rebuild.
-.TP
-\fBwhy\fP \fIfile\fP
-Explains why make must rebuild the given file.
-.SH ENVIRONMENT VARIABLES
-One of the following variables (but not both) should be set if the
-source
-directory is different from the build directory.
-If the build directory is simply a subdirectory of the source directory,
-the simpler variable OBJ_SUBDIR should be used.
-.TP
-OBJ_SUBDIR
-Indicates that the build directory is in the given subdirectory of the
-source directory. For instance, if the source directory is \fItdesdk\fP
-and the build directory is \fItdesdk/obj-i386-linux\fP, then OBJ_SUBDIR
-should be set to \fIobj-i386-linux\fP.
-.TP
-OBJ_REPLACEMENT
-A \fBsed\fP expression that is used to transform the source directory
-into the build directory.
-For instance, if the source directory is \fI~/src/tdesdk\fP and the
-build directory is \fI~/src/tdesdk-obj\fP, then OBJ_REPLACEMENT could
-be set to \fIs#tdesdk#tdesdk-obj#\fP.
-.SH SEE ALSO
-.BR make (1).
-.SH AUTHOR
-cheatmake was written by David Faure <faure@kde.org>.
-.br
-This manual page was prepared by Ben Burton <bab@debian.org>
-for the Debian GNU/Linux system (but may be used by others).
diff --git a/ubuntu/maverick/tdesdk/debian/man/create_cvsignore.1 b/ubuntu/maverick/tdesdk/debian/man/create_cvsignore.1
deleted file mode 100644
index ce63f6f55..000000000
--- a/ubuntu/maverick/tdesdk/debian/man/create_cvsignore.1
+++ /dev/null
@@ -1,42 +0,0 @@
-.\" Hey, EMACS: -*- nroff -*-
-.\" First parameter, NAME, should be all caps
-.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
-.\" other parameters are allowed: see man(7), man(1)
-.TH CREATE_CVSIGNORE 1 "March 20, 2005"
-.\" Please adjust this date whenever revising the manpage.
-.\"
-.\" Some roff macros, for reference:
-.\" .nh disable hyphenation
-.\" .hy enable hyphenation
-.\" .ad l left justify
-.\" .ad b justify to both left and right margins
-.\" .nf disable filling
-.\" .fi enable filling
-.\" .br insert line break
-.\" .sp <n> insert n+1 empty lines
-.\" for manpage-specific macros, see man(7)
-.SH NAME
-create_cvsignore \- creates preliminary .cvsignore in current directory
-.SH SYNOPSIS
-.B create_cvsignore
-[ \fB\-r\fP ]
-.SH DESCRIPTION
-\fBcreate_cvsignore\fP is used to create a preliminary \fI.cvsignore\fP
-file in the current directory. It does this by adding some standard
-stuff according to what it finds in \fIMakefile.am\fP.
-.PP
-No lines will be removed from any existing \fI.cvsignore\fP.
-If there is not already a \fI.cvsignore\fP, it will be added to the CVS
-repository.
-.PP
-Note that you must have a \fIMakefile.am\fP in the current directory for
-this tool to work.
-.PP
-This utility is part of the TDE Software Development Kit.
-.SH OPTIONS
-.TP
-\fB-r\fP
-Recursively process this directory and all directories beneath it.
-.SH AUTHOR
-This manual page was prepared by Ben Burton <bab@debian.org>
-for the Debian GNU/Linux system (but may be used by others).
diff --git a/ubuntu/maverick/tdesdk/debian/man/create_makefile.1 b/ubuntu/maverick/tdesdk/debian/man/create_makefile.1
deleted file mode 100644
index e128f23e9..000000000
--- a/ubuntu/maverick/tdesdk/debian/man/create_makefile.1
+++ /dev/null
@@ -1,69 +0,0 @@
-.\" Hey, EMACS: -*- nroff -*-
-.\" First parameter, NAME, should be all caps
-.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
-.\" other parameters are allowed: see man(7), man(1)
-.TH CREATE_MAKEFILE 1 "September 26, 2002"
-.\" Please adjust this date whenever revising the manpage.
-.\"
-.\" Some roff macros, for reference:
-.\" .nh disable hyphenation
-.\" .hy enable hyphenation
-.\" .ad l left justify
-.\" .ad b justify to both left and right margins
-.\" .nf disable filling
-.\" .fi enable filling
-.\" .br insert line break
-.\" .sp <n> insert n+1 empty lines
-.\" for manpage-specific macros, see man(7)
-.SH NAME
-create_makefile \- creates Makefile.in and Makefile from a Makefile.am
-.SH SYNOPSIS
-.B create_makefile
-.I relativepath/Makefile
-.br
-.B create_makefile
-.I relativepath
-.SH DESCRIPTION
-\fBcreate_makefile\fP creates the \fIMakefile.in\fP and \fIMakefile\fP
-in a subdirectory containing a \fIMakefile.am\fP.
-This script saves time compared to re-running configure completely.
-.PP
-Note that you must supply the path to the desired \fIMakefile\fP, not the
-existing \fIMakefile.am\fP (though the final \fI/Makefile\fP may be omitted).
-.PP
-This script may be run from the toplevel directory (the
-one containing \fIconfigure\fP) or from one of its subdirectories.
-Note that \fIrelativepath\fP must be a relative path, not an absolute path.
-.PP
-If the source directory is different from the build directory (see the
-environment variables below), it will be assumed that the \fIMakefile.am\fP
-and \fIMakefile.in\fP belong beneath the source directory and that the
-\fIMakefile\fP belongs beneath the build directory.
-.PP
-This utility is part of the TDE Software Development Kit.
-.SH ENVIRONMENT VARIABLES
-One of the following variables (but not both) should be set if the
-source
-directory is different from the build directory.
-If the build directory is simply a subdirectory of the source directory,
-the simpler variable OBJ_SUBDIR should be used.
-.TP
-OBJ_SUBDIR
-Indicates that the build directory is in the given subdirectory of the
-source directory. For instance, if the source directory is \fItdesdk\fP
-and the build directory is \fItdesdk/obj-i386-linux\fP, then OBJ_SUBDIR
-should be set to \fIobj-i386-linux\fP.
-.TP
-OBJ_REPLACEMENT
-A \fBsed\fP expression that is used to transform the source directory
-into the build directory.
-For instance, if the source directory is \fI~/src/tdesdk\fP and the
-build directory is \fI~/src/tdesdk-obj\fP, then OBJ_REPLACEMENT could
-be set to \fIs#tdesdk#tdesdk-obj#\fP.
-.SH SEE ALSO
-.BR create_makefiles (1).
-.SH AUTHOR
-create_makefile was written by David Faure <faure@kde.org> and others.
-.br
-This manual page was prepared by Ben Burton <bab@debian.org>
-for the Debian GNU/Linux system (but may be used by others).
diff --git a/ubuntu/maverick/tdesdk/debian/man/create_makefiles.1 b/ubuntu/maverick/tdesdk/debian/man/create_makefiles.1
deleted file mode 100644
index 2efc03795..000000000
--- a/ubuntu/maverick/tdesdk/debian/man/create_makefiles.1
+++ /dev/null
@@ -1,63 +0,0 @@
-.\" Hey, EMACS: -*- nroff -*-
-.\" First parameter, NAME, should be all caps
-.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
-.\" other parameters are allowed: see man(7), man(1)
-.TH CREATE_MAKEFILES 1 "September 27, 2002"
-.\" Please adjust this date whenever revising the manpage.
-.\"
-.\" Some roff macros, for reference:
-.\" .nh disable hyphenation
-.\" .hy enable hyphenation
-.\" .ad l left justify
-.\" .ad b justify to both left and right margins
-.\" .nf disable filling
-.\" .fi enable filling
-.\" .br insert line break
-.\" .sp <n> insert n+1 empty lines
-.\" for manpage-specific macros, see man(7)
-.SH NAME
-create_makefiles \- recreates all Makefiles beneath a directory
-.SH SYNOPSIS
-.B create_makefiles
-.I dir
-.SH DESCRIPTION
-\fBcreate_makefiles\fP recreates all \fIMakefile\fPs in
-\fIdir\fP and its (recursed) subdirectories from the corresponding
-\fIMakefile.am\fP templates.
-.PP
-This script must be run from the toplevel directory (the
-one containing \fIconfigure\fP).
-This script saves time compared to re-running configure completely.
-.PP
-If the source directory is different from the build directory (see the
-environment variables below), it will be assumed that each \fIMakefile.am\fP
-and \fIMakefile.in\fP belongs beneath the source directory and that each
-\fIMakefile\fP belongs beneath the build directory.
-.PP
-This utility is part of the TDE Software Development Kit.
-.SH ENVIRONMENT VARIABLES
-One of the following variables (but not both) should be set if the
-source
-directory is different from the build directory.
-If the build directory is simply a subdirectory of the source directory,
-the simpler variable OBJ_SUBDIR should be used.
-.TP
-OBJ_SUBDIR
-Indicates that the build directory is in the given subdirectory of the
-source directory. For instance, if the source directory is \fItdesdk\fP
-and the build directory is \fItdesdk/obj-i386-linux\fP, then OBJ_SUBDIR
-should be set to \fIobj-i386-linux\fP.
-.TP
-OBJ_REPLACEMENT
-A \fBsed\fP expression that is used to transform the source directory
-into the build directory.
-For instance, if the source directory is \fI~/src/tdesdk\fP and the
-build directory is \fI~/src/tdesdk-obj\fP, then OBJ_REPLACEMENT could
-be set to \fIs#tdesdk#tdesdk-obj#\fP.
-.SH SEE ALSO
-.BR create_makefile (1).
-.SH AUTHOR
-create_makefiles was written by David Faure <faure@kde.org>.
-.br
-This manual page was prepared by Ben Burton <bab@debian.org>
-for the Debian GNU/Linux system (but may be used by others).
diff --git a/ubuntu/maverick/tdesdk/debian/man/cvs-clean.1 b/ubuntu/maverick/tdesdk/debian/man/cvs-clean.1
deleted file mode 100644
index 0706e485c..000000000
--- a/ubuntu/maverick/tdesdk/debian/man/cvs-clean.1
+++ /dev/null
@@ -1,50 +0,0 @@
-.\" Hey, EMACS: -*- nroff -*-
-.\" First parameter, NAME, should be all caps
-.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
-.\" other parameters are allowed: see man(7), man(1)
-.TH CVS-CLEAN 1 "March 20, 2005"
-.\" Please adjust this date whenever revising the manpage.
-.\"
-.\" Some roff macros, for reference:
-.\" .nh disable hyphenation
-.\" .hy enable hyphenation
-.\" .ad l left justify
-.\" .ad b justify to both left and right margins
-.\" .nf disable filling
-.\" .fi enable filling
-.\" .br insert line break
-.\" .sp <n> insert n+1 empty lines
-.\" for manpage-specific macros, see man(7)
-.SH NAME
-cvs\-clean \- delete all files and directories not registered with CVS
-.SH SYNOPSIS
-.B cvs\-clean
-[ \fB-n, \-\-dry-run\fP ]
-[ \fB-h, \-\-help\fP ]
-.SH DESCRIPTION
-\fBcvs\-clean\fP recursively deletes everything in or beneath the
-current directory that is not known to CVS (i.e., that has not been
-checked out of or checked into a CVS repository).
-.PP
-A list of all files and directories that are deleted will be written to
-the console.
-.PP
-This script behaves similarly to the \fIcvs-clean\fP target from the
-file \fIadmin/Makefile.common\fP found in most TDE application sources.
-.PP
-This utility is part of the TDE Software Development Kit.
-.SH OPTIONS
-.TP
-\fB-n, \-\-dry-run\fP
-Print the intended actions to the console, but do not change anything on
-the filesystem.
-.TP
-\fB-h, \-\-help\fP
-Display usage information.
-.SH SEE ALSO
-.BR cvs (1).
-.SH AUTHOR
-This utility was written by Oswald Buddenhagen <ossi@kde.org>.
-.br
-This manual page was prepared by Ben Burton <bab@debian.org>
-for the Debian GNU/Linux system (but may be used by others).
diff --git a/ubuntu/maverick/tdesdk/debian/man/cvs2dist.1 b/ubuntu/maverick/tdesdk/debian/man/cvs2dist.1
deleted file mode 100644
index f0bc71a3e..000000000
--- a/ubuntu/maverick/tdesdk/debian/man/cvs2dist.1
+++ /dev/null
@@ -1,201 +0,0 @@
-.\" Hey, EMACS: -*- nroff -*-
-.\" First parameter, NAME, should be all caps
-.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
-.\" other parameters are allowed: see man(7), man(1)
-.TH CVS2DIST 1 "March 19, 2005"
-.\" Please adjust this date whenever revising the manpage.
-.\"
-.\" Some roff macros, for reference:
-.\" .nh disable hyphenation
-.\" .hy enable hyphenation
-.\" .ad l left justify
-.\" .ad b justify to both left and right margins
-.\" .nf disable filling
-.\" .fi enable filling
-.\" .br insert line break
-.\" .sp <n> insert n+1 empty lines
-.\" for manpage-specific macros, see man(7)
-.SH NAME
-cvs2dist \- convert subdirectories within TDE CVS into standalone
-source packages
-.SH SYNOPSIS
-.B cvsdist
-.I path-to-module
-.I directory-in-module
-[ \fB\-n, \-\-name\fP \fIname\fP ]
-[ \fB\-v, \-\-version\fP \fIversion\fP ]
-[ \fB\-\-admin-dir\fP \fIdir\fP ]
-[ \fB\-\-cvs-root\fP \fIroot\fP ]
-[ \fB\-B, \-\-branch\fP \fIbranch\fP ]
-[ \fB\-\-no-i18n\fP ]
-[ \fB\-\-no-i18n-lang\fP \fIlanguages\fP ]
-[ \fB\-\-log=\fP\fIlogfile\fP | \fB\-l\fP ]
-[ \fB\-m, \-\-make-unpackaged\fP ]
-[ \fB\-g, \-\-no-gzip\fP ]
-[ \fB\-b, \-\-no-bz2, \-\-no-bzip2\fP ]
-[ \fB\-o, \-\-only-directory\fP ]
-[ \fB\-r, \-\-required-header\fP \fIheader\fP ]
-[ \fB\-e, \-\-required-header-error-message\fP \fImessage\fP ]
-[ \fB\-d, \-\-remove-hidden\fP ]
-[ \fB\-\-replace-files\fP \fIpairs\fP ]
-[[--] \fIaddfile\fP ... ]
-.PP
-.B cvsdist
-\fB\-h, \-\-help\fP
-.SH DESCRIPTION
-Each module in the TDE CVS tree contains a large number of applications
-all bundled together.
-\fBcvs2dist\fP is used to extract a single application or component from
-one of these large CVS modules and bundle it into a standalone package.
-The application or component will be bundled into a standard
-distribution tarball (with a configure script and so on) that users can
-download, build and install.
-.PP
-By default, cvs2dist automatically tries to check out all translations
-of strings and documentation from the corresponding parts of the
-\fItde-i18n\fP CVS module and include them in the final packages.
-This can be suppressed or modified using the options \-\-no-i18n or
-\-\-no-i18n-lang.
-.PP
-The initial argument \fIpath-to-module\fP should specify where the CVS
-module has been checked out on your system, and the second argument
-\fIdirectory-in-module\fP should specify which directory within this
-module is to be packaged (all subdirectories beneath it will be included
-and so on). See the EXAMPLE section below for details.
-.PP
-Both gzip and bzip2 compressed tarballs will be created by default and
-will be called \fIname[-version].tar.gz\fP and \fIname[-version].tar.bz2\fP.
-The \fIname\fP component will be the last directory component of
-\fIdirectory-in-module\fP unless otherwise specified by \-\-name, and
-the \fIversion\fP component will not be included unless it is specified by
-\-\-version.
-.PP
-Additional files from outside the CVS tree can be included in the final
-packages by passing them after all other options (these are the
-\fIaddfile\fP arguments displayed above). These additional files will
-be placed in the top level directory of the final packages.
-The \-\- that precedes them is optional.
-.PP
-Many options are available for customising these procedures, as seen below.
-Note that cvs2dist will remove any temporary files that it creates.
-.PP
-This utility is part of the TDE Software Development Kit.
-.SH OPTIONS
-.TP
-\fB\-n, \-\-name\fP \fIname\fP
-The name of the package (to be used in the names of the final tarballs
-and directories). Specifically, the compressed tarballs will be called
-\fIname-version.tar.gz\fP and \fIname-version.tar.bz2\fP (see the
-\-\-version option below for further information).
-This package name defaults to the last directory component of
-\fIdirectory-in-module\fP.
-.TP
-\fB\-v, \-\-version\fP \fIversion\fP
-The version of the package (to be used in the names of the final
-tarballs and directories). If this is not supplied, no version is used
-at all (i.e., the compressed tarballs will just be called \fIname.tar.gz\fP
-and \fIname.tar.bz2\fP).
-.TP
-\fB\-\-admin-dir\fP \fIdir\fP
-The location of \fIadmin/\fP on the filesystem. Symbolic links may
-be used. Defaults to \fIpath-to-module/admin\fP.
-.TP
-\fB\-\-cvs-root\fP \fIroot\fP
-The value to use as CVSROOT when checking out translations from CVS.
-Defaults to the CVSROOT environment variable.
-If \-\-no-i18n is passed then this option has no effect.
-.TP
-\fB\-B, \-\-branch\fP \fIbranch\fP
-Use the given CVS branch for checking out translations from CVS.
-If \-\-no-i18n is passed then this option has no effect.
-.TP
-\fB\-\-no-i18n\fP
-Do not check out any translations from CVS.
-.TP
-\fB\-\-no-i18n-lang\fP \fIlanguages\fP
-Exclude the given language(s) when checking out translations from CVS.
-The list of languages should be comma-separated,
-such as \fI\-\-no-i18n-lang uk,de,en_GB\fP .
-.TP
-\fB\-\-log=\fP\fIlogfile\fP
-Log all proceedings to the given logfile. Note that the = is essential,
-and may not be omitted.
-.TP
-\fB\-l\fP
-Log all proceedings to the default logfile in the current directory.
-.TP
-\fB\-m, \-\-make-unpackaged\fP
-In addition to the compressed tarballs, an unpacked distribution will be
-created in the current directory.
-.TP
-\fB\-g, \-\-no-gzip\fP
-Do not create a gzip package (\fIname-version.tar.gz\fP).
-.TP
-\fB\-b, \-\-no-bz2, \-\-no-bzip2\fP
-Do not create a bzip2 package (\fIname-version.tar.bz2\fP).
-.TP
-\fB\-o, \-\-only-directory\fP
-Alias for \-mgb. No packages will be created, only an unpacked directory.
-.TP
-\fB\-r, \-\-required-header\fP \fIheader\fP
-When the user runs configure, an error will be generated if
-\fIheader\fP is not found on the user's system.
-.TP
-\fB\-e, \-\-required-header-error-message\fP \fImessage\fP
-The error to display to a user when the header passed with
-\-\-required-header is not found on the user's system. Defaults to a
-sensible message.
-.TP
-\fB\-d, \-\-remove-hidden\fP
-Remove hidden files and directories (e.g., dotfiles) from the packages.
-.TP
-\fB\-h, \-\-help\fP
-Display instructions on how to use cvs2dist.
-.TP
-\fB\-\-replace-files\fP \fIpairs\fP
-Move one or more files around in the final distribution packages.
-The \fIpairs\fP argument should be a comma-separated list of
-replacements to make. Each replacement specifies a single file to move, and
-should be of the form \fIsource\fP@\fIdest\fP.
-.br
-For each replacement, the source file will be moved to the
-destination file (in particular, the source file will be deleted).
-All filenames are relative to the top-level directory
-of the package. Spaces in filenames are not allowed.
-.br
-Please be careful when using this option! Try to avoid the use of ..
-in the filenames, since it may cause unexpected problems.
-.br
-An example of this option might be
-\fI\-\-replace-files take_this_file@move_it_here,configure.in.bot.dist@configure.in.bot\fP .
-.SH EXAMPLE
-The following example creates packages of the kolf picture plugin from
-the CVS source tree currently checked out in \fI/sources\fP.
-.PP
-.RS
-\fIexample$\fP cvs2dist /sources/tdegames kolf/objects/picture
-\-n kolf-picture \-v 0.9 \-r "kolf/game.h" \-\-log ~/tmp/extra-file
-.RE
-.PP
-The packages will be named \fIkolf-picture-0.9\fP and
-the process will be logged. For configure to succeed when a user builds
-these packages, the header \fIkolf/game.h\fP must be installed or an
-error will occur. The additional file \fI~/tmp/extra-file\fP will be
-included in the packages even though it is not part of the CVS source tree.
-.SH FILES
-.TP
-\fI~/.cvs2distrc\fP
-Any options found in this file will be
-added to the beginning of the command-line arguments.
-.SH SEE ALSO
-.BR cvs (1).
-.PP
-For the latest updates to this script, see the cvs2dist website
-\fIhttp://www.katzbrown.com/shiritsu/programming/cvs2dist/\fP.
-.SH AUTHOR
-cvs2dist was written by Jason Katz-Brown <jason@katzbrown.com>,
-Sebastian Stein <seb.stein@hpfsc.de>, Dominique Devriese <devriese@kde.org>
-and Michael Buesch <mbuesch@freenet.de>.
-.br
-This manual page was prepared by Ben Burton <bab@debian.org>
-for the Debian GNU/Linux system (but may be used by others).
diff --git a/ubuntu/maverick/tdesdk/debian/man/cvsaskpass.1 b/ubuntu/maverick/tdesdk/debian/man/cvsaskpass.1
deleted file mode 100644
index d4b7e5dfd..000000000
--- a/ubuntu/maverick/tdesdk/debian/man/cvsaskpass.1
+++ /dev/null
@@ -1,63 +0,0 @@
-.\" Hey, EMACS: -*- nroff -*-
-.\" First parameter, NAME, should be all caps
-.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
-.\" other parameters are allowed: see man(7), man(1)
-.TH CVSASKPASS 1 "March 19, 2005"
-.\" Please adjust this date whenever revising the manpage.
-.\"
-.\" Some roff macros, for reference:
-.\" .nh disable hyphenation
-.\" .hy enable hyphenation
-.\" .ad l left justify
-.\" .ad b justify to both left and right margins
-.\" .nf disable filling
-.\" .fi enable filling
-.\" .br insert line break
-.\" .sp <n> insert n+1 empty lines
-.\" for manpage-specific macros, see man(7)
-.SH NAME
-cvsaskpass \- prompt for a password for the CVS DCOP service
-.SH SYNOPSIS
-.B cvsaskpass
-.RI "[ " generic-options " ]"
-.I prompt
-.SH DESCRIPTION
-This utility displays a dialog box prompting the user for the password to
-a CVS repository, then writes the password to standard output and exits.
-You should not need to run this program directly \- it is designed for
-the internal use of
-.BR cvsservice (1).
-.PP
-The prompt should be of the following form:
-.RS
-.PP
-\fIuser\fP@\fIhost\fP's password:
-.RE
-.PP
-This will allow the dialog box to display the details of the CVS
-repository to the user.
-.PP
-This utility is part of the CVS service provided with Cervisia, which in
-turn is part of the TDE Software Development Kit.
-.SH OPTIONS
-For a full summary of options, run \fIcvsaskpass \-\-help\fP.
-.SH RETURN VALUE
-If a password was succefully obtained, 0 is returned. If no prompt was
-supplied on the command-line or if the dialog was cancelled, 1 is returned.
-.SH SEE ALSO
-.BR cervisia (1),
-.BR cvsservice (1),
-.BR dcop (1).
-.PP
-Details of how to use the CVS service from within another script or C++
-program can be found in \fI/usr/share/doc/libcvsservice0/DESIGN\fP.
-.SH AUTHOR
-The CVS service was written by Christian Loose <christian.loose@kdemail.net>.
-.br
-Cervisia was written by Bernd Gehrmann <bernd@physik.hu-berlin.de>,
-Christian Loose <christian.loose@kdemail.net>,
-Andre Woebbeking <woebbeking@web.de>,
-Carlos Woelz <carloswoelz@imap-mail.com> and others.
-.br
-This manual page was prepared by Ben Burton <bab@debian.org>
-for the Debian GNU/Linux system (but may be used by others).
diff --git a/ubuntu/maverick/tdesdk/debian/man/cvsbackport.1 b/ubuntu/maverick/tdesdk/debian/man/cvsbackport.1
deleted file mode 100644
index 7181ac671..000000000
--- a/ubuntu/maverick/tdesdk/debian/man/cvsbackport.1
+++ /dev/null
@@ -1,52 +0,0 @@
-.\" Hey, EMACS: -*- nroff -*-
-.\" First parameter, NAME, should be all caps
-.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
-.\" other parameters are allowed: see man(7), man(1)
-.TH CVSBACKPORT 1 "March 20, 2005"
-.\" Please adjust this date whenever revising the manpage.
-.\"
-.\" Some roff macros, for reference:
-.\" .nh disable hyphenation
-.\" .hy enable hyphenation
-.\" .ad l left justify
-.\" .ad b justify to both left and right margins
-.\" .nf disable filling
-.\" .fi enable filling
-.\" .br insert line break
-.\" .sp <n> insert n+1 empty lines
-.\" for manpage-specific macros, see man(7)
-.SH NAME
-cvsbackport \- backport the last change in HEAD to a branch
-.SH SYNOPSIS
-.B cvsbackport
-\fIfile\fP ...
-.SH DESCRIPTION
-For each file given on the command line,
-\fBcvsbackport\fP will attempt to determine the last change made to
-the file in HEAD and then backport that change to a CVS branch (the
-branch name is hard-coded; see below).
-.PP
-The changes to be backported will be displayed on screen, and you will
-have the chance to confirm or abort before any commits are made.
-.PP
-The files must be checked out from HEAD when you run this utility.
-.PP
-This utility is part of the TDE Software Development Kit.
-.SH WARNINGS
-The branch tag is hard-coded into the script (currently it is set to
-KDE_3_4_BRANCH).
-.PP
-If you abort (i.e., you do not make the suggested commits), your files
-will be checked out from the branch (and not from HEAD as they were
-before).
-.SH SEE ALSO
-.BR cvsblame (1),
-.BR cvsforwardport (1),
-.BR cvslastchange (1),
-.BR cvslastlog (1),
-.BR cvsrevertlast (1).
-.SH AUTHOR
-This utility was written by Dirk Mueller and David Faure.
-.br
-This manual page was prepared by Ben Burton <bab@debian.org>
-for the Debian GNU/Linux system (but may be used by others).
diff --git a/ubuntu/maverick/tdesdk/debian/man/cvscheck.1 b/ubuntu/maverick/tdesdk/debian/man/cvscheck.1
deleted file mode 100644
index 3d79c255b..000000000
--- a/ubuntu/maverick/tdesdk/debian/man/cvscheck.1
+++ /dev/null
@@ -1,107 +0,0 @@
-.\" Hey, EMACS: -*- nroff -*-
-.\" First parameter, NAME, should be all caps
-.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
-.\" other parameters are allowed: see man(7), man(1)
-.TH CVSCHECK 1 "March 26, 2005"
-.\" Please adjust this date whenever revising the manpage.
-.\"
-.\" Some roff macros, for reference:
-.\" .nh disable hyphenation
-.\" .hy enable hyphenation
-.\" .ad l left justify
-.\" .ad b justify to both left and right margins
-.\" .nf disable filling
-.\" .fi enable filling
-.\" .br insert line break
-.\" .sp <n> insert n+1 empty lines
-.\" for manpage-specific macros, see man(7)
-.SH NAME
-cvscheck \- offline status report for files in a checked-out CVS module
-.SH SYNOPSIS
-.B cvscheck
-[ \fB\-u, \-\-unknown\fP ]
-[ \fB\-m, \-\-modified\fP ]
-[ \fB\-\-missing\fP ]
-[ \fB\-t, \-\-tagged\fP ]
-[ \fB\-a, \-\-added\fP ]
-[ \fB\-r, \-\-removed\fP ]
-[ \fB\-c, \-\-conflicts\fP ]
-[ \fB\-l, \-\-local\fP ]
-[ \fIdir\fP ... ]
-.SH DESCRIPTION
-\fBcvscheck\fP prints information about the status of your local CVS
-checkout without communicating with the server. This means it is
-extremely fast and does not require a network connection.
-.PP
-The given directories and all of their subdirectories will be processed
-recursively (though see the \-\-local option below).
-If no directory is given, the current directory and its
-recursed subdirectories will be used.
-.PP
-Each file with an interesting status will be printed with a status
-character in front of its name. The status characters are as follows.
-.TP
-? \fIfoobar.c\fP
-The file is not known to CVS. Maybe you should add it?
-.TP
-M \fIfoobar.c\fP
-The file is for sure locally modified.
-.TP
-m \fIfoobar.c\fP
-The file \fImight\fP have local changes. You should diff with the
-server to make sure.
-.TP
-C \fIfoobar.c\fP
-The file has a CVS conflict and therefore cannot be committed.
-.TP
-U \fIfoobar.c\fP
-The file is in CVS but is somehow missing in your local checkout.
-.TP
-T \fIfoobar.c\fP
-The file has an unusual sticky CVS tag.
-.TP
-A \fIfoobar.c\fP
-You have "cvs add"ed this file but you have not yet committed.
-.TP
-R \fIfoobar.c\fP
-You have "cvs remove"d this file but you have not yet committed.
-.PP
-This utility is part of the TDE Software Development Kit.
-.SH OPTIONS
-By default cvscheck will display the status for all files in and
-beneath the requested directories. The following options however can be
-used to display only files with a particular status and/or in a
-particular directory.
-.TP
-\fB\-u, \-\-unknown\fP
-Show only unknown (?) files.
-.TP
-\fB\-m, \-\-modified\fP
-Show only modified (m/M) files.
-.TP
-\fB\-\-missing\fP
-Show only missing (U) files.
-.TP
-\fB\-t, \-\-tagged\fP
-Show only tagged (T) files.
-.TP
-\fB\-a, \-\-added\fP
-Show only added (A) files.
-.TP
-\fB\-r, \-\-removed\fP
-Show only removed (R) files.
-.TP
-\fB\-c, \-\-conflicts\fP
-Show only conflict (C) files.
-.TP
-\fB\-l, \-\-local\fP
-Do not recurse. That is, process the given directory but none of its
-subdirectories.
-.SH SEE ALSO
-.BR cvs (1).
-.SH AUTHOR
-cvscheck was written by Dirk Mueller <mueller@kde.org> and
-Sirtaj Singh Kang <taj@kde.org>.
-.br
-This manual page was prepared by Ben Burton <bab@debian.org>
-for the Debian GNU/Linux system (but may be used by others).
diff --git a/ubuntu/maverick/tdesdk/debian/man/cvsforwardport.1 b/ubuntu/maverick/tdesdk/debian/man/cvsforwardport.1
deleted file mode 100644
index 0ca6d29f5..000000000
--- a/ubuntu/maverick/tdesdk/debian/man/cvsforwardport.1
+++ /dev/null
@@ -1,52 +0,0 @@
-.\" Hey, EMACS: -*- nroff -*-
-.\" First parameter, NAME, should be all caps
-.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
-.\" other parameters are allowed: see man(7), man(1)
-.TH CVSFORWARDPORT 1 "March 20, 2005"
-.\" Please adjust this date whenever revising the manpage.
-.\"
-.\" Some roff macros, for reference:
-.\" .nh disable hyphenation
-.\" .hy enable hyphenation
-.\" .ad l left justify
-.\" .ad b justify to both left and right margins
-.\" .nf disable filling
-.\" .fi enable filling
-.\" .br insert line break
-.\" .sp <n> insert n+1 empty lines
-.\" for manpage-specific macros, see man(7)
-.SH NAME
-cvsforwardport \- forwardport the last change in a branch to HEAD
-.SH SYNOPSIS
-.B cvsforwardport
-\fIfile\fP ...
-.SH DESCRIPTION
-For each file given on the command line,
-\fBcvsforwardport\fP will attempt to determine the last change made to
-the file in the primary CVS branch and then forwardport that change to HEAD.
-The branch name is hard-coded; see below.
-.PP
-The changes to be forwardported will be displayed on screen, and you will
-have the chance to confirm or abort before any commits are made.
-.PP
-The files must be checked out from the branch when you run this utility.
-.PP
-This utility is part of the TDE Software Development Kit.
-.SH WARNINGS
-The branch tag is hard-coded into the script (currently it is set to
-KDE_3_4_BRANCH).
-.PP
-If you abort (i.e., you do not make the suggested commits), your files
-will be checked out from HEAD (and not from the branch as they were
-before).
-.SH SEE ALSO
-.BR cvsbackport (1),
-.BR cvsblame (1),
-.BR cvslastchange (1),
-.BR cvslastlog (1),
-.BR cvsrevertlast (1).
-.SH AUTHOR
-This utility was written by Dirk Mueller and David Faure.
-.br
-This manual page was prepared by Ben Burton <bab@debian.org>
-for the Debian GNU/Linux system (but may be used by others).
diff --git a/ubuntu/maverick/tdesdk/debian/man/cvslastchange.1 b/ubuntu/maverick/tdesdk/debian/man/cvslastchange.1
deleted file mode 100644
index b651e4414..000000000
--- a/ubuntu/maverick/tdesdk/debian/man/cvslastchange.1
+++ /dev/null
@@ -1,59 +0,0 @@
-.\" Hey, EMACS: -*- nroff -*-
-.\" First parameter, NAME, should be all caps
-.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
-.\" other parameters are allowed: see man(7), man(1)
-.TH CVSLASTCHANGE 1 "March 20, 2005"
-.\" Please adjust this date whenever revising the manpage.
-.\"
-.\" Some roff macros, for reference:
-.\" .nh disable hyphenation
-.\" .hy enable hyphenation
-.\" .ad l left justify
-.\" .ad b justify to both left and right margins
-.\" .nf disable filling
-.\" .fi enable filling
-.\" .br insert line break
-.\" .sp <n> insert n+1 empty lines
-.\" for manpage-specific macros, see man(7)
-.SH NAME
-cvslastchange \- display the last committed changes for a file
-.SH SYNOPSIS
-.B cvslastchange
-\fIfile\fP [ \fIrevision\fP ]
-.br
-.B cvslastchange
-\fBM\fP +\fIdigits\fP -\fIdigits\fP
-.I file revision
-.SH DESCRIPTION
-\fBcvslastchange\fP displays the last changes committed to the CVS
-for the given file.
-It does this by launching '\fIcvs log\fP' and '\fIcvs diff\fP'.
-.PP
-If a revision is passed, the changes committed for that particular revision
-will be displayed. Otherwise the currently checked out revision will be used.
-.PP
-This tool works with other branches as well as with HEAD.
-.PP
-This utility is part of the TDE Software Development Kit.
-.SH OPTIONS
-.TP
-\fBM\fP +\fIdigits\fP -\fIdigits\fP
-These options are currently ignored.
-.SH ENVIRONMENT VARIABLES
-.TP
-CVSLASTCHANGE_KEEP_WHITESPACE
-Define this variable if you do not want the whitespace to be modified
-in any way when displaying changes. Usually the whitespace is tidied
-up a little before the changes are displayed on screen.
-.br
-This variable is useful if you are using cvslastchange to extract a
-patch that can be applied elsewhere.
-.SH SEE ALSO
-.BR cvsbackport (1),
-.BR cvsblame (1),
-.BR cvsforwardport (1),
-.BR cvslastlog (1),
-.BR cvsrevertlast (1).
-.SH AUTHOR
-This manual page was prepared by Ben Burton <bab@debian.org>
-for the Debian GNU/Linux system (but may be used by others).
diff --git a/ubuntu/maverick/tdesdk/debian/man/cvslastlog.1 b/ubuntu/maverick/tdesdk/debian/man/cvslastlog.1
deleted file mode 100644
index 445a1a74a..000000000
--- a/ubuntu/maverick/tdesdk/debian/man/cvslastlog.1
+++ /dev/null
@@ -1,39 +0,0 @@
-.\" Hey, EMACS: -*- nroff -*-
-.\" First parameter, NAME, should be all caps
-.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
-.\" other parameters are allowed: see man(7), man(1)
-.TH CVSLASTLOG 1 "March 20, 2005"
-.\" Please adjust this date whenever revising the manpage.
-.\"
-.\" Some roff macros, for reference:
-.\" .nh disable hyphenation
-.\" .hy enable hyphenation
-.\" .ad l left justify
-.\" .ad b justify to both left and right margins
-.\" .nf disable filling
-.\" .fi enable filling
-.\" .br insert line break
-.\" .sp <n> insert n+1 empty lines
-.\" for manpage-specific macros, see man(7)
-.SH NAME
-cvslastlog \- prints the log of the last commit for a file
-.SH SYNOPSIS
-.B cvslastlog
-.I file
-.SH DESCRIPTION
-\fBcvslastlog\fP shows the log associated with the last CVS commit for the
-given file.
-It depends on the version of the local file, not the one on the server.
-.PP
-This utility is part of the TDE Software Development Kit.
-.SH SEE ALSO
-.BR cvsbackport (1),
-.BR cvsblame (1),
-.BR cvsforwardport (1),
-.BR cvslastchange (1),
-.BR cvsrevertlast (1).
-.SH AUTHOR
-cvslastlog was written by David Faure <faure@kde.org>.
-.br
-This manual page was prepared by Ben Burton <bab@debian.org>
-for the Debian GNU/Linux system (but may be used by others).
diff --git a/ubuntu/maverick/tdesdk/debian/man/cvsrevertlast.1 b/ubuntu/maverick/tdesdk/debian/man/cvsrevertlast.1
deleted file mode 100644
index aedf45aa6..000000000
--- a/ubuntu/maverick/tdesdk/debian/man/cvsrevertlast.1
+++ /dev/null
@@ -1,38 +0,0 @@
-.\" Hey, EMACS: -*- nroff -*-
-.\" First parameter, NAME, should be all caps
-.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
-.\" other parameters are allowed: see man(7), man(1)
-.TH CVSREVERTLAST 1 "March 20, 2005"
-.\" Please adjust this date whenever revising the manpage.
-.\"
-.\" Some roff macros, for reference:
-.\" .nh disable hyphenation
-.\" .hy enable hyphenation
-.\" .ad l left justify
-.\" .ad b justify to both left and right margins
-.\" .nf disable filling
-.\" .fi enable filling
-.\" .br insert line break
-.\" .sp <n> insert n+1 empty lines
-.\" for manpage-specific macros, see man(7)
-.SH NAME
-cvsrevertlast \- revert files in CVS by one version
-.SH SYNOPSIS
-.B cvsrevertlast
-\fIfile\fP ...
-.SH DESCRIPTION
-\fBcvsrevertlast\fP is used to revert all the files on the command line
-by one version in CVS. The files will not be committed.
-.PP
-This utility is part of the TDE Software Development Kit.
-.SH SEE ALSO
-.BR cvsbackport (1),
-.BR cvsblame (1),
-.BR cvsforwardport (1),
-.BR cvslastchange (1),
-.BR cvslastlog (1).
-.SH AUTHOR
-This utility was written by Charles Samuels <charles@kde.org>.
-.br
-This manual page was prepared by Ben Burton <bab@debian.org>
-for the Debian GNU/Linux system (but may be used by others).
diff --git a/ubuntu/maverick/tdesdk/debian/man/cvsservice.1 b/ubuntu/maverick/tdesdk/debian/man/cvsservice.1
deleted file mode 100644
index 9d5c791d7..000000000
--- a/ubuntu/maverick/tdesdk/debian/man/cvsservice.1
+++ /dev/null
@@ -1,79 +0,0 @@
-.\" Hey, EMACS: -*- nroff -*-
-.\" First parameter, NAME, should be all caps
-.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
-.\" other parameters are allowed: see man(7), man(1)
-.TH CVSSERVICE 1 "March 19, 2005"
-.\" Please adjust this date whenever revising the manpage.
-.\"
-.\" Some roff macros, for reference:
-.\" .nh disable hyphenation
-.\" .hy enable hyphenation
-.\" .ad l left justify
-.\" .ad b justify to both left and right margins
-.\" .nf disable filling
-.\" .fi enable filling
-.\" .br insert line break
-.\" .sp <n> insert n+1 empty lines
-.\" for manpage-specific macros, see man(7)
-.SH NAME
-cvsservice \- a DCOP service for accessing CVS repositories
-.SH SYNOPSIS
-.B cvsservice
-.RI "[ " generic-options " ]"
-.SH DESCRIPTION
-The CVS service is a DCOP service for accessing and working with
-remote CVS repositories. Applications may link with this library to
-access the DCOP service directly from C++. Alternatively, scripts may
-access the service using the standard
-.BR dcop (1)
-command-line tool.
-.PP
-DCOP is the Desktop Communication Protocol used throughout TDE.
-.PP
-The CVS DCOP service consists of the following three parts:
-.TP
-\fBCvsService\fP
-The main interface to the functionality of the
-.BR cvs (1)
-command line client. There is one method for each CVS command, e.g., add,
-checkout, commit, etc. The methods assemble the command line
-arguments, create a CvsJob and return a DCOPRef object for it
-to the caller. There is one instance of this service for each
-application instance.
-.TP
-\fBRepository\fP
-This DCOPObject manages the configuration data of the current
-CVS repository. The data is automatically updated when other
-service instances change it.
-.TP
-\fBCvsJob\fP
-This class represents a CVS job. You can execute and cancel it,
-and you can retrieve the output of the cvs client by either
-connecting to the proper DCOP signals or by using the output()
-method. There are two types of jobs. First the non-concurrent
-job which has to run alone, like cvs update or import. Second
-the jobs which can run concurrently like cvs log or annotate.
-.PP
-The CVS service is provided with Cervisia, which is part of the TDE
-Software Development Kit.
-.SH OPTIONS
-For a full summary of options, run \fIcvsservice \-\-help\fP.
-.SH SEE ALSO
-.BR cervisia (1),
-.BR cvs (1),
-.BR cvsaskpass (1),
-.BR dcop (1).
-.PP
-Details of how to use the CVS service from within a shell script, a C++
-program or through the JavaScript bindings can be found in
-\fI/usr/share/doc/libcvsservice0/DESIGN\fP.
-.SH AUTHOR
-The CVS service was written by Christian Loose <christian.loose@kdemail.net>.
-.br
-Cervisia was written by Bernd Gehrmann <bernd@physik.hu-berlin.de>,
-Christian Loose <christian.loose@kdemail.net>,
-Andre Woebbeking <woebbeking@web.de>,
-Carlos Woelz <carloswoelz@imap-mail.com> and others.
-.br
-This manual page was prepared by Ben Burton <bab@debian.org>
-for the Debian GNU/Linux system (but may be used by others).
diff --git a/ubuntu/maverick/tdesdk/debian/man/cxxmetric.1 b/ubuntu/maverick/tdesdk/debian/man/cxxmetric.1
deleted file mode 100644
index a8a855cde..000000000
--- a/ubuntu/maverick/tdesdk/debian/man/cxxmetric.1
+++ /dev/null
@@ -1,34 +0,0 @@
-.\" Hey, EMACS: -*- nroff -*-
-.\" First parameter, NAME, should be all caps
-.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
-.\" other parameters are allowed: see man(7), man(1)
-.TH CXXMETRIC 1 "January 31, 2004"
-.\" Please adjust this date whenever revising the manpage.
-.\"
-.\" Some roff macros, for reference:
-.\" .nh disable hyphenation
-.\" .hy enable hyphenation
-.\" .ad l left justify
-.\" .ad b justify to both left and right margins
-.\" .nf disable filling
-.\" .fi enable filling
-.\" .br insert line break
-.\" .sp <n> insert n+1 empty lines
-.\" for manpage-specific macros, see man(7)
-.SH NAME
-cxxmetric \- simple source metrics for C and C++
-.SH SYNOPSIS
-.B cxxmetric
-.RI "[ " file " ... ]"
-.SH DESCRIPTION
-\fBcxxmetric\fP counts lines of code, comment and blank space and
-calculates various other statistics for each given source file.
-Source files must be in C or C++.
-.PP
-If no source files are specified then all C/C++ files in or beneath the
-current directory will be used.
-.PP
-This utility is part of the TDE Software Development Kit.
-.SH AUTHOR
-This manual page was prepared by Ben Burton <bab@debian.org>
-for the Debian GNU/Linux system (but may be used by others).
diff --git a/ubuntu/maverick/tdesdk/debian/man/demangle.1 b/ubuntu/maverick/tdesdk/debian/man/demangle.1
deleted file mode 100644
index 8f4f3922f..000000000
--- a/ubuntu/maverick/tdesdk/debian/man/demangle.1
+++ /dev/null
@@ -1,57 +0,0 @@
-.\" Hey, EMACS: -*- nroff -*-
-.\" First parameter, NAME, should be all caps
-.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
-.\" other parameters are allowed: see man(7), man(1)
-.TH DEMANGLE 1 "February 25, 2003"
-.\" Please adjust this date whenever revising the manpage.
-.\"
-.\" Some roff macros, for reference:
-.\" .nh disable hyphenation
-.\" .hy enable hyphenation
-.\" .ad l left justify
-.\" .ad b justify to both left and right margins
-.\" .nf disable filling
-.\" .fi enable filling
-.\" .br insert line break
-.\" .sp <n> insert n+1 empty lines
-.\" for manpage-specific macros, see man(7)
-.SH NAME
-demangle \- undo C++ name mangling for symbols
-.SH SYNOPSIS
-.B demangle
-.SH DESCRIPTION
-\fBDemangle\fP reads a list of C++ mangled symbol names from standard
-input and converts these names to human-readable form on standard
-output.
-.PP
-This utility is part of the TDE Software Development Kit.
-.SH EXAMPLE
-Create a file called \fInames\fP containing the following mangled symbol
-names:
-.PP
-.RS
-_ZNK6Object10metaObjectEv
-.br
-_ZN8QPtrListI5ArrowE5clearEv
-.br
-_ZTC4Kolf0_11TDEMainWindow
-.RE
-.PP
-These names can then be demangled as follows:
-.PP
-.RS
-\fIexample$\fP demangle < names
-.br
-Object::metaObject() const
-.br
-QPtrList<Arrow>::clear()
-.br
-construction vtable for TDEMainWindow-in-Kolf
-.RE
-.SH SEE ALSO
-.BR kminspector (1),
-.BR kmmatch (1),
-.BR kmtrace (1).
-.SH AUTHOR
-This manual page was prepared by Ben Burton <bab@debian.org>
-for the Debian GNU/Linux system (but may be used by others).
diff --git a/ubuntu/maverick/tdesdk/debian/man/dprof2calltree.1 b/ubuntu/maverick/tdesdk/debian/man/dprof2calltree.1
deleted file mode 100644
index 88bcd0b0d..000000000
--- a/ubuntu/maverick/tdesdk/debian/man/dprof2calltree.1
+++ /dev/null
@@ -1,60 +0,0 @@
-.\" Hey, EMACS: -*- nroff -*-
-.\" First parameter, NAME, should be all caps
-.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
-.\" other parameters are allowed: see man(7), man(1)
-.TH DPROF2CALLTREE 1 "October 15, 2004"
-.\" Please adjust this date whenever revising the manpage.
-.\"
-.\" Some roff macros, for reference:
-.\" .nh disable hyphenation
-.\" .hy enable hyphenation
-.\" .ad l left justify
-.\" .ad b justify to both left and right margins
-.\" .nf disable filling
-.\" .fi enable filling
-.\" .br insert line break
-.\" .sp <n> insert n+1 empty lines
-.\" for manpage-specific macros, see man(7)
-.SH NAME
-dprof2calltree \- convert perl's DProf profiling data to KCachegrind calltree format
-.SH SYNOPSIS
-.B dprof2calltree
-\fB\-f\fP \fIinput\fP
-[ \fB\-o\fP \fIoutput\fP ]
-.SH DESCRIPTION
-\fBdprof2calltree\fP reads the \fItmon.out\fP profiling data output by
-Perl's Devel::DProf profiling package, and converts it into calltree format
-for use by KCachegrind.
-.PP
-This utility is part of the TDE Software Development Kit.
-.SH OPTIONS
-.TP
-\fB\-f\fP \fIinput\fP
-Specifies the DProf \fItmon.out\fP file to convert.
-.TP
-\fB\-o\fP \fIoutput\fP
-Write the calltree output to the given file for use by KCachegrind.
-If omitted, the output will be written to file of the form
-\fIcachgrind.out.<input>\fP.
-.SH EXAMPLE
-If you run a perl script as:
-.PP
-.RS
-perl -d:DProf yourscript.pl
-.RE
-.PP
-then this will write profiling data to \fItmon.out\fP. You can then
-work with this data in KCachegrind as follows:
-.PP
-.RS
-dprof2calltree -f tmin.out -o cachegrind.out.foo
-.br
-tdecachegrind cachegrind.out.foo
-.RE
-.SH SEE ALSO
-.BR tdecachegrind (1).
-.SH AUTHOR
-This converter was written by George Schlossnagle <george@omniti.com>.
-.br
-This manual page was prepared by Ben Burton <bab@debian.org>
-for the Debian GNU/Linux system (but may be used by others).
diff --git a/ubuntu/maverick/tdesdk/debian/man/extend_dmalloc.1 b/ubuntu/maverick/tdesdk/debian/man/extend_dmalloc.1
deleted file mode 100644
index 0078442ef..000000000
--- a/ubuntu/maverick/tdesdk/debian/man/extend_dmalloc.1
+++ /dev/null
@@ -1,43 +0,0 @@
-.\" Hey, EMACS: -*- nroff -*-
-.\" First parameter, NAME, should be all caps
-.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
-.\" other parameters are allowed: see man(7), man(1)
-.TH EXTEND_DMALLOC 1 "April 29, 2001"
-.\" Please adjust this date whenever revising the manpage.
-.\"
-.\" Some roff macros, for reference:
-.\" .nh disable hyphenation
-.\" .hy enable hyphenation
-.\" .ad l left justify
-.\" .ad b justify to both left and right margins
-.\" .nf disable filling
-.\" .fi enable filling
-.\" .br insert line break
-.\" .sp <n> insert n+1 empty lines
-.\" for manpage-specific macros, see man(7)
-.SH NAME
-extend_dmalloc \- analyse return-addresses from dmalloc logfiles
-.SH SYNOPSIS
-.B extend_dmalloc
-.I dmalloc-log binary
-.SH DESCRIPTION
-\fBextend_dmalloc\fP will run
-.BR gdb (1)
-to get information on the return-addresses from a
-.BR dmalloc (1)
-logfile. Specifically it will examine any \fIra=\fP lines and try to
-get the corresponding line numbers.
-.PP
-The argument \fIbinary\fP must be the binary that generated the log
-\fIdmalloc-log\fP.
-.PP
-This utility is part of the TDE Software Development Kit.
-.SH NOTES
-You may wish to direct the output from extend_dmalloc to a file, since
-otherwise gdb seems to prompt for a return as if you are at the end of a
-page.
-.SH AUTHOR
-extend_dmalloc was written by Gray Watson <gray.watson@letters.com>.
-.br
-This manual page was prepared by Ben Burton <bab@debian.org>
-for the Debian GNU/Linux system (but may be used by others).
diff --git a/ubuntu/maverick/tdesdk/debian/man/extractattr.1 b/ubuntu/maverick/tdesdk/debian/man/extractattr.1
deleted file mode 100644
index 7e506e449..000000000
--- a/ubuntu/maverick/tdesdk/debian/man/extractattr.1
+++ /dev/null
@@ -1,61 +0,0 @@
-.\" Hey, EMACS: -*- nroff -*-
-.\" First parameter, NAME, should be all caps
-.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
-.\" other parameters are allowed: see man(7), man(1)
-.TH EXTRACTATTR 1 "March 20, 2005"
-.\" Please adjust this date whenever revising the manpage.
-.\"
-.\" Some roff macros, for reference:
-.\" .nh disable hyphenation
-.\" .hy enable hyphenation
-.\" .ad l left justify
-.\" .ad b justify to both left and right margins
-.\" .nf disable filling
-.\" .fi enable filling
-.\" .br insert line break
-.\" .sp <n> insert n+1 empty lines
-.\" for manpage-specific macros, see man(7)
-.SH NAME
-extractattr \- extract element attributes from UI and XML GUI files
-.SH SYNOPSIS
-.B extractattr
-\fB\-\-attr=\fP\fIname\fP
-[ \fB\-\-attr=\fP\fIname\fP ... ]
-[ \fB\-\-context=\fP\fIname\fP ]
-\fIfile\fP ...
-.PP
-.B extractattr \-\-help
-.SH DESCRIPTION
-\fBextractattr\fP finds all of the given element attributes within the
-given files. It then writes the corresponding \fIi18n()\fP calls to
-standard output (usually redirected to rc.cpp) so that xgettext can parse
-them. Only the attributes specified by \fB\-\-attr\fP will be extracted.
-.PP
-Both Qt designer (.ui) files and XML GUI (.rc) files are understood.
-.PP
-This utility is part of the TDE Software Development Kit.
-.SH OPTIONS
-.TP
-\fB\-\-attr=\fP\fIname\fP
-Specifies an attribute to be extracted. This option may be used
-multiple times.
-.br
-The \fIname\fP argument must be of the form
-\fIElement\fP,\fIattribute\fP or
-\fIElement\fP,\fIattribute\fP,\fIcontext\fP.
-.br
-The context is optional, and is used in constructing the i18n() calls.
-If specified it will override the default context set by \fB\-\-context\fP.
-.TP
-\fB\-\-context=\fP\fIname\fP
-Give all i18n() calls the given context: i18n("\fIname\fP", ...).
-.TP
-\fB\-\-help\fP
-Display a summary of options.
-.SH EXAMPLE
-extractattr \-\-attr=Title,data \-\-attr=Description,data,Stencils file.ui
-.SH AUTHOR
-This utility was written by Richard Evans <rich@ridas.com> and others.
-.br
-This manual page was prepared by Ben Burton <bab@debian.org>
-for the Debian GNU/Linux system (but may be used by others).
diff --git a/ubuntu/maverick/tdesdk/debian/man/extractrc.1 b/ubuntu/maverick/tdesdk/debian/man/extractrc.1
deleted file mode 100644
index 130fdb089..000000000
--- a/ubuntu/maverick/tdesdk/debian/man/extractrc.1
+++ /dev/null
@@ -1,60 +0,0 @@
-.\" Hey, EMACS: -*- nroff -*-
-.\" First parameter, NAME, should be all caps
-.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
-.\" other parameters are allowed: see man(7), man(1)
-.TH EXTRACTRC 1 "March 20, 2005"
-.\" Please adjust this date whenever revising the manpage.
-.\"
-.\" Some roff macros, for reference:
-.\" .nh disable hyphenation
-.\" .hy enable hyphenation
-.\" .ad l left justify
-.\" .ad b justify to both left and right margins
-.\" .nf disable filling
-.\" .fi enable filling
-.\" .br insert line break
-.\" .sp <n> insert n+1 empty lines
-.\" for manpage-specific macros, see man(7)
-.SH NAME
-extractrc \- extract message strings from UI and XML GUI files
-.SH SYNOPSIS
-.B extractrc
-[ \fB\-\-tag\-group=\fP\fIgroup\fP ]
-[ \fB\-\-tag=\fP\fIname\fP ... ]
-[ \fB\-\-context=\fP\fIname\fP ]
-\fIfile\fP ...
-.PP
-.B extractrc \-\-help
-.SH DESCRIPTION
-\fBextractrc\fP finds all text tags and other message strings within the
-given files. It then writes the corresponding \fIi18n()\fP calls to
-standard output (usually redirected to rc.cpp) so that xgettext can parse
-them.
-.PP
-It understands both Qt designer (.ui) files and XML GUI (.rc) files.
-.PP
-This utility is part of the TDE Software Development Kit.
-.SH OPTIONS
-Note that the old \fB\-\-lines\fP option is deprecated; source line
-numbers are now always included in comments.
-.TP
-\fB\-\-tag\-group=\fP\fIgroup\fP
-Use a predefined group of tags that we are interested in.
-Valid groups are default, koffice and none.
-The default group will be used if this option is omitted.
-.TP
-\fB\-\-tag=\fP\fIname\fP
-Extract also the contents of the tag \fIname\fP.
-This option may be used multiple times
-(e.g., \-\-tag=tag_one \-\-tag=tag_two).
-.TP
-\fB\-\-context=\fP\fIname\fP
-Give all i18n() calls the given context: i18n("\fIname\fP", ...).
-.TP
-\fB\-\-help\fP
-Display a summary of options.
-.SH AUTHOR
-This utility was written by Richard Evans <rich@ridas.com> and others.
-.br
-This manual page was prepared by Ben Burton <bab@debian.org>
-for the Debian GNU/Linux system (but may be used by others).
diff --git a/ubuntu/maverick/tdesdk/debian/man/findmissingcrystal.1 b/ubuntu/maverick/tdesdk/debian/man/findmissingcrystal.1
deleted file mode 100644
index 32b23294e..000000000
--- a/ubuntu/maverick/tdesdk/debian/man/findmissingcrystal.1
+++ /dev/null
@@ -1,42 +0,0 @@
-.\" Hey, EMACS: -*- nroff -*-
-.\" First parameter, NAME, should be all caps
-.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
-.\" other parameters are allowed: see man(7), man(1)
-.TH FINDMISSINGCRYSTAL 1 "February 6, 2004"
-.\" Please adjust this date whenever revising the manpage.
-.\"
-.\" Some roff macros, for reference:
-.\" .nh disable hyphenation
-.\" .hy enable hyphenation
-.\" .ad l left justify
-.\" .ad b justify to both left and right margins
-.\" .nf disable filling
-.\" .fi enable filling
-.\" .br insert line break
-.\" .sp <n> insert n+1 empty lines
-.\" for manpage-specific macros, see man(7)
-.SH NAME
-findmissingcrystal \- determine which TDE Crystal icons are the same as
-the TDE Classic hicolor icons
-.SH SYNOPSIS
-.B findmissingcrystal
-.I module
-.SH DESCRIPTION
-\fBfindmissingcrystal\fP is a small utility that runs through the icons
-in the given TDE module and determines which Crystal icons from that
-module are identical to the old TDE Classic hicolor icons.
-.PP
-This script \fBmust\fP be run from the top-level directory of a TDE source
-tree (i.e., the directory containing \fItdelibs\fP, \fItdebase\fP, etc.).
-It is assumed that \fImodule\fP is a top-level module in the source tree,
-and it is also assumed that the source tree contains the \fItdeartwork\fP
-module (which contains the old hicolor icons).
-.PP
-For each Crystal icon in the given module, a message will be output
-describing whether the icon is new (no matching hicolor icon was found),
-different from the hicolor icon or the same as the hicolor icon.
-.PP
-This utility is part of the TDE Software Development Kit.
-.SH AUTHOR
-This manual page was prepared by Ben Burton <bab@debian.org>
-for the Debian GNU/Linux system (but may be used by others).
diff --git a/ubuntu/maverick/tdesdk/debian/man/fixkdeincludes.1 b/ubuntu/maverick/tdesdk/debian/man/fixkdeincludes.1
deleted file mode 100644
index 43ae3dfff..000000000
--- a/ubuntu/maverick/tdesdk/debian/man/fixkdeincludes.1
+++ /dev/null
@@ -1,73 +0,0 @@
-.\" Hey, EMACS: -*- nroff -*-
-.\" First parameter, NAME, should be all caps
-.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
-.\" other parameters are allowed: see man(7), man(1)
-.TH FIXTDEINCLUDES 1 "January 31, 2004"
-.\" Please adjust this date whenever revising the manpage.
-.\"
-.\" Some roff macros, for reference:
-.\" .nh disable hyphenation
-.\" .hy enable hyphenation
-.\" .ad l left justify
-.\" .ad b justify to both left and right margins
-.\" .nf disable filling
-.\" .fi enable filling
-.\" .br insert line break
-.\" .sp <n> insert n+1 empty lines
-.\" for manpage-specific macros, see man(7)
-.SH NAME
-fixkdeincludes \- reduce the number of #includes in TDE source files
-.SH SYNOPSIS
-.B fixkdeincludes
-[ \fB\-v, \-\-verbose\fP ]
-[ \fB\-e, \-\-experimental\fP ]
-[ \fB\-m, \-\-modify\fP ]
-[ \fIfile\fP ... ]
-.br
-.B fixkdeincludes \-\-help
-.SH DESCRIPTION
-\fBfixkdeincludes\fP tries to reduce the number of #includes in C++ source
-files. Much of its processing is specific to TDE sources and so it
-might not work so well with sources for non-TDE applications.
-.PP
-The following problems are identified by fixkdeincludes:
-.PP
-.RS
-Including headers that are no longer supported but which exist for
-compatibility with older Qt/KDE versions;
-.PP
-Including the same file multiple times;
-.PP
-Using #include <...> instead of #include "...".
-.RE
-.PP
-There is also an experimental mode which tries removing each #include
-one at a time (with a few exceptions) to see whether the source still
-compiles. Note that this experimental mode will modify the original sources.
-.PP
-By default the sources will not be modified; the identified problems
-will simply be written to standard output.
-.PP
-The list of C++ sources to examine should be given on the command-line.
-If no files are given, all C++ sources in or beneath the current
-directory will be examined (with the exception of directories whose
-\fIMakefile.am\fP contains \-UQT_NO_COMPAT or \-UTDE_NO_COMPAT).
-.PP
-This utility is part of the TDE Software Development Kit.
-.SH OPTIONS
-.TP
-\fB\-v, \-\-verbose\fP
-Verbose mode. Additional debugging information is written to standard output.
-.TP
-\fB\-e, \-\-experimental\fP
-Experimental mode, as described above in detail. Note that this option
-implies \fB\-\-modify\fP.
-.TP
-\fB\-m, \-\-modify\fP
-As well as writing messages to standard output, actually modify the
-original sources to fix any problems that were found.
-.SH AUTHOR
-fixkdeincludes was written by Dirk Mueller <mueller@kde.org>.
-.br
-This manual page was prepared by Ben Burton <bab@debian.org>
-for the Debian GNU/Linux system (but may be used by others).
diff --git a/ubuntu/maverick/tdesdk/debian/man/fixuifiles.1 b/ubuntu/maverick/tdesdk/debian/man/fixuifiles.1
deleted file mode 100644
index 17ce46a61..000000000
--- a/ubuntu/maverick/tdesdk/debian/man/fixuifiles.1
+++ /dev/null
@@ -1,63 +0,0 @@
-.\" Hey, EMACS: -*- nroff -*-
-.\" First parameter, NAME, should be all caps
-.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
-.\" other parameters are allowed: see man(7), man(1)
-.TH FIXUIFILES 1 "March 20, 2005"
-.\" Please adjust this date whenever revising the manpage.
-.\"
-.\" Some roff macros, for reference:
-.\" .nh disable hyphenation
-.\" .hy enable hyphenation
-.\" .ad l left justify
-.\" .ad b justify to both left and right margins
-.\" .nf disable filling
-.\" .fi enable filling
-.\" .br insert line break
-.\" .sp <n> insert n+1 empty lines
-.\" for manpage-specific macros, see man(7)
-.SH NAME
-fixuifiles \- remove undesirable features from TQt/TDE .ui files
-.SH SYNOPSIS
-.B fixuifiles
-[ \fB\-v, \-\-verbose\fP ]
-[ \fB\-\-omitqtcheck\fP ]
-[ \fIfile\fP ... ]
-.br
-.B fixuifiles \-\-help
-.SH DESCRIPTION
-\fBfixuifiles\fP processes one or more TQt/TDE user interface definition
-files (.ui files) and tries to remove some of the insanities found
-therein. If no filenames are given, fixuifiles will process all .ui
-files in or beneath the current directory.
-.PP
-The following problems are fixed:
-.PP
-.RS
-Too high minimum Qt version;
-.PP
-Hardcoded untranslatable Alt+Letter accels (auto-added by Qt Designer);
-.PP
-Captions that are equal to class names (auto-added by Qt Designer).
-.RE
-.PP
-The threshold Qt version can be set
-using either a \fI.qt_minversion\fP file (containing simply the Qt version
-number) or a \fIconfigure.in.in\fP file (containing an appropriate
-MIN_CONFIG macro). These files may be in the directory containing the .ui
-file or any parent directory. If no threshold Qt version is found,
-a sensible default will be used.
-.PP
-This utility is part of the TDE Software Development Kit.
-.SH OPTIONS
-.TP
-\fB\-v, \-\-verbose\fP
-Verbose mode. Additional debugging information is written to standard output.
-.TP
-\fB\-\-omitqtcheck\fP
-Do not check the minimum Qt version.
-.SH AUTHOR
-fixuifiles was written by David Faure <faure@kde.org> and
-Dirk Mueller <mueller@kde.org>.
-.br
-This manual page was prepared by Ben Burton <bab@debian.org>
-for the Debian GNU/Linux system (but may be used by others).
diff --git a/ubuntu/maverick/tdesdk/debian/man/hotshot2calltree.1 b/ubuntu/maverick/tdesdk/debian/man/hotshot2calltree.1
deleted file mode 100644
index 8c4d4441c..000000000
--- a/ubuntu/maverick/tdesdk/debian/man/hotshot2calltree.1
+++ /dev/null
@@ -1,57 +0,0 @@
-.\" Hey, EMACS: -*- nroff -*-
-.\" First parameter, NAME, should be all caps
-.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
-.\" other parameters are allowed: see man(7), man(1)
-.TH HOTSHOT2CALLTREE 1 "October 15, 2004"
-.\" Please adjust this date whenever revising the manpage.
-.\"
-.\" Some roff macros, for reference:
-.\" .nh disable hyphenation
-.\" .hy enable hyphenation
-.\" .ad l left justify
-.\" .ad b justify to both left and right margins
-.\" .nf disable filling
-.\" .fi enable filling
-.\" .br insert line break
-.\" .sp <n> insert n+1 empty lines
-.\" for manpage-specific macros, see man(7)
-.SH NAME
-hotshot2calltree \- convert hotshot profiling data to KCachegrind calltree format
-.SH SYNOPSIS
-.B hotshot2calltree
-[ \fB\-\-file\-limit\fP \fIlimit\fP ]
-\fB\-o\fP \fIoutput\fP \fIinput\fP [ \fIinput\fP ... ]
-.SH DESCRIPTION
-\fBhotshot2calltree\fP reads one or more pstat profiling data files
-as output by the hotshot python profiler, and converts them into
-calltree format for use by KCachegrind.
-.PP
-This utility is part of the TDE Software Development Kit.
-.SH OPTIONS
-.TP
-\fB\-o\fP \fIoutput\fP
-Write the calltree output into the given file for use by KCachegrind.
-This may be \fB\-\fP if you wish to write to standard output.
-.TP
-\fIinput\fP ...
-Read the hotshot profiling data from the given file(s).
-.TP
-\fB\-\-file\-limit\fP \fIlimit\fP
-Stop after the given number of input files.
-.SH EXAMPLE
-Suppose that you have used hotshot to profile a python app, with results
-dumped to the file \fIpythongrind.prof\fP. You may then work with this
-data in KCachegrind as follows.
-.PP
-.RS
-hotshot2cachegrind \-o cachegrind.out.0 pythongrind.prof
-.br
-tdecachegrind cachegrind.out.0
-.RE
-.SH SEE ALSO
-.BR tdecachegrind (1).
-.SH AUTHOR
-This converter was written by Jorg Beyer <job@webde-ag.de>.
-.br
-This manual page was prepared by Ben Burton <bab@debian.org>
-for the Debian GNU/Linux system (but may be used by others).
diff --git a/ubuntu/maverick/tdesdk/debian/man/kapptemplate.1 b/ubuntu/maverick/tdesdk/debian/man/kapptemplate.1
deleted file mode 100644
index 1010ecd52..000000000
--- a/ubuntu/maverick/tdesdk/debian/man/kapptemplate.1
+++ /dev/null
@@ -1,69 +0,0 @@
-.\" Hey, EMACS: -*- nroff -*-
-.\" First parameter, NAME, should be all caps
-.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
-.\" other parameters are allowed: see man(7), man(1)
-.TH KAPPTEMPLATE 1 "January 31, 2004"
-.\" Please adjust this date whenever revising the manpage.
-.\"
-.\" Some roff macros, for reference:
-.\" .nh disable hyphenation
-.\" .hy enable hyphenation
-.\" .ad l left justify
-.\" .ad b justify to both left and right margins
-.\" .nf disable filling
-.\" .fi enable filling
-.\" .br insert line break
-.\" .sp <n> insert n+1 empty lines
-.\" for manpage-specific macros, see man(7)
-.SH NAME
-kapptemplate \- creates a framework to develop a TDE application
-.SH SYNOPSIS
-.B kapptemplate
-[ \fB\-\-noinit\fP ] [ \fB\-\-default\fP ]
-.RB "[ " \-\-full\-app " | " \-\-kpart\-app " | " \-\-kpart\-plugin
-.RB " | " \-\-existing " ]"
-.PP
-.B kapptemplate \-\-help
-.SH DESCRIPTION
-\fBKAppTemplate\fP is a shell script that will create the necessary
-framework to develop various TDE applications. It takes care of the
-autoconf/automake code as well as providing a skeleton and example of
-what the code typically looks like.
-.PP
-This utility is part of the TDE Software Development Kit.
-.SH OPTIONS
-.SS General Options
-.TP
-\-\-help
-Display a full summary of options.
-.TP
-\-\-noinit
-Don't run 'make \-f Makefile.cvs'.
-.TP
-\-\-default
-Use default values instead of prompting.
-.SS Framework Types
-.TP
-\-\-full\-app
-Create a full featured TDE application.
-.TP
-\-\-kpart\-app
-Create a full featured KPart application.
-.TP
-\-\-kpart\-plugin
-Create a KPart plugin framework.
-.TP
-\-\-existing
-Converting existing source to an automake/autoconf TDE framework.
-.SH FILES
-.TP
-.I ~/.kapptemplate
-Stores default values.
-.SH SEE ALSO
-The original documentation from the program author
-is available in \fI/usr/share/doc/kapptemplate/\fP.
-.SH AUTHOR
-KAppTemplate was written by Kurt Granroth <granroth@kde.org>.
-.br
-This manual page was prepared by Ben Burton <bab@debian.org>
-for the Debian GNU/Linux system (but may be used by others).
diff --git a/ubuntu/maverick/tdesdk/debian/man/kbabel.1 b/ubuntu/maverick/tdesdk/debian/man/kbabel.1
deleted file mode 100644
index 047e3626d..000000000
--- a/ubuntu/maverick/tdesdk/debian/man/kbabel.1
+++ /dev/null
@@ -1,74 +0,0 @@
-.\" Hey, EMACS: -*- nroff -*-
-.\" First parameter, NAME, should be all caps
-.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
-.\" other parameters are allowed: see man(7), man(1)
-.TH KBABEL 1 "March 19, 2005"
-.\" Please adjust this date whenever revising the manpage.
-.\"
-.\" Some roff macros, for reference:
-.\" .nh disable hyphenation
-.\" .hy enable hyphenation
-.\" .ad l left justify
-.\" .ad b justify to both left and right margins
-.\" .nf disable filling
-.\" .fi enable filling
-.\" .br insert line break
-.\" .sp <n> insert n+1 empty lines
-.\" for manpage-specific macros, see man(7)
-.SH NAME
-kbabel \- a PO-file editor for TDE
-.SH SYNOPSIS
-.B kbabel
-.RI "[ " generic-options " ]"
-[ \fB\-\-gotomsgid\fP \fImsgid\fP ] [ \fB\-\-nosplash\fP ]
-[ \fB\-\-project\fP \fIconfig-file\fP ]
-.RI "[ " file " ]"
-.SH DESCRIPTION
-\fBKBabel\fP is part of a suite of programs for editing gettext message
-files (PO-files). It is designed to help you translate fast and
-consistently.
-.PP
-This suite includes KBabel, CatalogManager and KBabelDict. KBabel (this
-program) is an advanced and easy to use PO-file editor with full navigational
-and editing capabilities, syntax checking and statistics. CatalogManager is
-a multi functional catalog manager which allows you to keep track of many
-PO-files at once. KBabelDict is a dictionary to assist with searching
-for common translations.
-.PP
-This utility is part of the TDE Software Development Kit.
-.SH OPTIONS
-Below are the kbabel-specific options.
-For a full summary of options, run \fIkbabel \-\-help\fP.
-.TP
-\fB\-\-gotomsgid\fP \fImsgid\fP
-Go to the entry with the given message ID.
-.TP
-.B \-\-nosplash
-Disable splashscreen at startup.
-.TP
-\fB\-\-project\fP \fIconfig-file\fP
-Load the configuration from the given file.
-.SH SEE ALSO
-.BR catalogmanager (1),
-.BR kbabeldict (1).
-.PP
-Full user documentation is available through the TDE Help Centre.
-You can also enter the URL
-\fIhelp:/kbabel/\fP
-directly into konqueror or you can run
-`\fIkhelpcenter help:/kbabel/\fP'
-from the command-line.
-.PP
-If the TDE Help Centre is not installed then you can install the package
-\fItdesdk-doc-html\fP and read this documentation in HTML format from
-\fI/usr/share/doc/tde/HTML/en/kbabel/\fP.
-.SH AUTHOR
-KBabel was written by Matthias Kiefer <kiefer@kde.org>,
-Wolfram Diestel <wolfram@steloj.de>, Andrea Rizzi <rizzi@kde.org>,
-Stanislav Visnovsky <visnovsky@kde.org>, Marco Wegner <dubbleu@web.de>,
-Asgeir Frimannsson <asgeirf@redhat.com>,
-Dwayne Bailey <dwayne@translate.org.za>,
-Bram Schoenmakers <bramschoenmakers@kde.nl> and others.
-.br
-This manual page was prepared by Ben Burton <bab@debian.org>
-for the Debian GNU/Linux system (but may be used by others).
diff --git a/ubuntu/maverick/tdesdk/debian/man/kbabeldict.1 b/ubuntu/maverick/tdesdk/debian/man/kbabeldict.1
deleted file mode 100644
index ffd9b4658..000000000
--- a/ubuntu/maverick/tdesdk/debian/man/kbabeldict.1
+++ /dev/null
@@ -1,66 +0,0 @@
-.\" Hey, EMACS: -*- nroff -*-
-.\" First parameter, NAME, should be all caps
-.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
-.\" other parameters are allowed: see man(7), man(1)
-.TH KBABELDICT 1 "March 19, 2005"
-.\" Please adjust this date whenever revising the manpage.
-.\"
-.\" Some roff macros, for reference:
-.\" .nh disable hyphenation
-.\" .hy enable hyphenation
-.\" .ad l left justify
-.\" .ad b justify to both left and right margins
-.\" .nf disable filling
-.\" .fi enable filling
-.\" .br insert line break
-.\" .sp <n> insert n+1 empty lines
-.\" for manpage-specific macros, see man(7)
-.SH NAME
-kbabeldict \- the KBabel dictionary for translators
-.SH SYNOPSIS
-.B kbabeldict
-.RI "[ " generic-options " ]"
-.RB "[ " \-\-nosplash " ]"
-.SH DESCRIPTION
-\fBKBabelDict\fP is part of a suite of programs for editing gettext message
-files (PO-files). This suite is designed to help you translate fast and
-consistently.
-.PP
-This suite includes KBabel, CatalogManager and KBabelDict. KBabel is an
-advanced and easy to use PO-file editor with full navigational and editing
-capabilities, syntax checking and statistics. CatalogManager is a multi
-functional catalog manager which allows you to keep track of many
-PO-files at once. KBabelDict (this program) is a dictionary to assist
-with searching for common translations.
-.PP
-This utility is part of the TDE Software Development Kit.
-.SH OPTIONS
-Below are the kbabeldict-specific options.
-For a full summary of options, run \fIkbabeldict \-\-help\fP.
-.TP
-.B \-\-nosplash
-Disable splashscreen at startup.
-.SH SEE ALSO
-.BR kbabel (1),
-.BR catalogmanager (1).
-.PP
-Full user documentation for KBabel is available through the TDE Help Centre.
-You can also enter the URL
-\fIhelp:/kbabel/\fP
-directly into konqueror or you can run
-`\fIkhelpcenter help:/kbabel/\fP'
-from the command-line.
-.PP
-If the TDE Help Centre is not installed then you can install the package
-\fItdesdk-doc-html\fP and read this documentation in HTML format from
-\fI/usr/share/doc/tde/HTML/en/kbabel/\fP.
-.SH AUTHOR
-KBabel was written by Matthias Kiefer <kiefer@kde.org>,
-Wolfram Diestel <wolfram@steloj.de>, Andrea Rizzi <rizzi@kde.org>,
-Stanislav Visnovsky <visnovsky@kde.org>, Marco Wegner <dubbleu@web.de>,
-Asgeir Frimannsson <asgeirf@redhat.com>,
-Dwayne Bailey <dwayne@translate.org.za>,
-Bram Schoenmakers <bramschoenmakers@kde.nl> and others.
-.br
-This manual page was prepared by Ben Burton <bab@debian.org>
-for the Debian GNU/Linux system (but may be used by others).
diff --git a/ubuntu/maverick/tdesdk/debian/man/kbugbuster.1 b/ubuntu/maverick/tdesdk/debian/man/kbugbuster.1
deleted file mode 100644
index 29b9c38d7..000000000
--- a/ubuntu/maverick/tdesdk/debian/man/kbugbuster.1
+++ /dev/null
@@ -1,50 +0,0 @@
-.\" Hey, EMACS: -*- nroff -*-
-.\" First parameter, NAME, should be all caps
-.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
-.\" other parameters are allowed: see man(7), man(1)
-.TH KBUGBUSTER 1 "January 31, 2004"
-.\" Please adjust this date whenever revising the manpage.
-.\"
-.\" Some roff macros, for reference:
-.\" .nh disable hyphenation
-.\" .hy enable hyphenation
-.\" .ad l left justify
-.\" .ad b justify to both left and right margins
-.\" .nf disable filling
-.\" .fi enable filling
-.\" .br insert line break
-.\" .sp <n> insert n+1 empty lines
-.\" for manpage-specific macros, see man(7)
-.SH NAME
-kbugbuster \- front end for the TDE bug tracking system
-.SH SYNOPSIS
-.B kbugbuster
-.RI "[ " generic-options " ]"
-[ \fB\-d, \-\-disconnected\fP ]
-[ \fB\-\-pkg, \-\-package\fP \fIpkg\fP ]
-[ \fB\-\-bug\fP \fInumber\fP ]
-.SH DESCRIPTION
-\fBKBugBuster\fP is a GUI front end for the TDE bug tracking system.
-It allows the user to view and manipulate bug reports and provides a
-variety of options for searching through reports.
-.PP
-This utility is part of the TDE Software Development Kit.
-.SH OPTIONS
-Below are the kbugbuster-specific options.
-For a full summary of options, run \fIkbugbuster \-\-help\fP.
-.TP
-[ \fB\-d, \-\-disconnected\fP ]
-Start in disconnected mode.
-.TP
-[ \fB\-\-pkg, \-\-package\fP \fIpkg\fP ]
-Start with the bug list for the given package.
-.TP
-[ \fB\-\-bug\fP \fInumber\fP ]
-Start with the given bug report.
-.SH AUTHOR
-KBugBuster was written by Martijn Klingens <klingens@kde.org>,
-Simon Hausmann <hausmann@kde.org>, Cornelius Schumacher <schumacher@kde.org>
-and David Faure <faure@kde.org>.
-.br
-This manual page was prepared by Ben Burton <bab@debian.org>
-for the Debian GNU/Linux system (but may be used by others).
diff --git a/ubuntu/maverick/tdesdk/debian/man/kdedoc.1 b/ubuntu/maverick/tdesdk/debian/man/kdedoc.1
deleted file mode 100644
index 1911442c2..000000000
--- a/ubuntu/maverick/tdesdk/debian/man/kdedoc.1
+++ /dev/null
@@ -1,42 +0,0 @@
-.\" Hey, EMACS: -*- nroff -*-
-.\" First parameter, NAME, should be all caps
-.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
-.\" other parameters are allowed: see man(7), man(1)
-.TH TDEDOC 1 "January 31, 2004"
-.\" Please adjust this date whenever revising the manpage.
-.\"
-.\" Some roff macros, for reference:
-.\" .nh disable hyphenation
-.\" .hy enable hyphenation
-.\" .ad l left justify
-.\" .ad b justify to both left and right margins
-.\" .nf disable filling
-.\" .fi enable filling
-.\" .br insert line break
-.\" .sp <n> insert n+1 empty lines
-.\" for manpage-specific macros, see man(7)
-.SH NAME
-kdedoc \- view documentation for a TDE class
-.SH SYNOPSIS
-.B kdedoc
-.I classname
-.SH DESCRIPTION
-\fBkdedoc\fP opens the documentation for the TDE class \fIclassname\fP
-in kfm/konqueror. Note that the class name is case sensitive. It is
-assumed that you have the tdelibs documentation installed.
-.PP
-This utility is part of the TDE Software Development Kit.
-.SH EXAMPLES
-To bring up help on the class TDEAboutDialog:
-.PP
-.RS
-kdedoc TDEAboutDialog
-.RE
-.SH DEBIAN USERS
-The tdelibs documentation is in the Debian package \fItdelibs4-doc\fP,
-which will need to be installed.
-.SH SEE ALSO
-.BR qtdoc (1).
-.SH AUTHOR
-This manual page was prepared by Ben Burton <bab@debian.org>
-for the Debian GNU/Linux system (but may be used by others).
diff --git a/ubuntu/maverick/tdesdk/debian/man/kdelnk2desktop.py.1 b/ubuntu/maverick/tdesdk/debian/man/kdelnk2desktop.py.1
deleted file mode 100644
index 41cce73a5..000000000
--- a/ubuntu/maverick/tdesdk/debian/man/kdelnk2desktop.py.1
+++ /dev/null
@@ -1,39 +0,0 @@
-.\" Hey, EMACS: -*- nroff -*-
-.\" First parameter, NAME, should be all caps
-.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
-.\" other parameters are allowed: see man(7), man(1)
-.TH KDELNK2DESKTOP.PY 1 "November 14, 2002"
-.\" Please adjust this date whenever revising the manpage.
-.\"
-.\" Some roff macros, for reference:
-.\" .nh disable hyphenation
-.\" .hy enable hyphenation
-.\" .ad l left justify
-.\" .ad b justify to both left and right margins
-.\" .nf disable filling
-.\" .fi enable filling
-.\" .br insert line break
-.\" .sp <n> insert n+1 empty lines
-.\" for manpage-specific macros, see man(7)
-.SH NAME
-kdelnk2desktop.py \- converts .kdelnk to .desktop
-.SH SYNOPSIS
-.B kdelnk2desktop.py
-.RI "[ " kdelnk-file " ] ..."
-.SH DESCRIPTION
-\fBkdelnk2desktop.py\fP is used to convert
-a \fI.kdelnk\fP file (used by KDE 1) into a \fI.desktop\fP
-file (used by KDE 2 and later).
-.PP
-File \fIkdelnk-file\fP must have a name ending in \fI.kdelnk\fP.
-After kdelnk2desktop.py is run, this will be replaced by a new file
-ending in \fI.desktop\fP. The original \fIkdelnk-file\fP will be
-removed.
-.PP
-This utility is part of the TDE Software Development Kit.
-.SH WARNING
-If \fIkdelnk-file\fP does not end in \fI.kdelnk\fP,
-the results of this script are unpredictable.
-.SH AUTHOR
-This manual page was prepared by Ben Burton <bab@debian.org>
-for the Debian GNU/Linux system (but may be used by others).
diff --git a/ubuntu/maverick/tdesdk/debian/man/kdemangen.pl.1 b/ubuntu/maverick/tdesdk/debian/man/kdemangen.pl.1
deleted file mode 100644
index 8acd79df1..000000000
--- a/ubuntu/maverick/tdesdk/debian/man/kdemangen.pl.1
+++ /dev/null
@@ -1,51 +0,0 @@
-.\" Hey, EMACS: -*- nroff -*-
-.\" First parameter, NAME, should be all caps
-.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
-.\" other parameters are allowed: see man(7), man(1)
-.TH KDEMANGEN.PL 1 "October 15, 2004"
-.\" Please adjust this date whenever revising the manpage.
-.\"
-.\" Some roff macros, for reference:
-.\" .nh disable hyphenation
-.\" .hy enable hyphenation
-.\" .ad l left justify
-.\" .ad b justify to both left and right margins
-.\" .nf disable filling
-.\" .fi enable filling
-.\" .br insert line break
-.\" .sp <n> insert n+1 empty lines
-.\" for manpage-specific macros, see man(7)
-.SH NAME
-kdemangen.pl \- automatically create a draft manpage for a TDE app
-.SH SYNOPSIS
-.B kdemangen.pl
-.I /path/to/application
-.SH DESCRIPTION
-\fBkdemangen.pl\fP will automatically create a draft manpage for a TDE
-application. Manpages are always better when hand-tailored, but this
-should give you a fairly good start.
-.PP
-To create the manpage, it will use the \-\-author and \-\-help\-all
-output for the application passed on the command line.
-It will also use the description in the
-Debian control file if one is available. To make use of this additional
-feature, you must run kdemangen.pl from within the \fIdebian/\fP
-subdirectory of the application sources.
-.PP
-The new manpage will be written to standard output.
-.PP
-This utility is part of the TDE Software Development Kit.
-.SH WARNING
-This utility will only work for a full TDE application that uses
-TDECmdLineArgs (which most full TDE applications do).
-.SH EXAMPLE
-.RS
-cd /path/to/tde/srcs/tdeedu/debian
-.br
-kdemangen /usr/bin/kstars > kstars.1
-.RE
-.SH AUTHOR
-kdemangen.pl was written by Dominique Devriese <devriese@kde.org>.
-.br
-This manual page was prepared by Ben Burton <bab@debian.org>
-for the Debian GNU/Linux system (but may be used by others).
diff --git a/ubuntu/maverick/tdesdk/debian/man/kminspector.1 b/ubuntu/maverick/tdesdk/debian/man/kminspector.1
deleted file mode 100644
index 29cb70e5b..000000000
--- a/ubuntu/maverick/tdesdk/debian/man/kminspector.1
+++ /dev/null
@@ -1,50 +0,0 @@
-.\" Hey, EMACS: -*- nroff -*-
-.\" First parameter, NAME, should be all caps
-.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
-.\" other parameters are allowed: see man(7), man(1)
-.TH KMINSPECTOR 1 "February 25, 2003"
-.\" Please adjust this date whenever revising the manpage.
-.\"
-.\" Some roff macros, for reference:
-.\" .nh disable hyphenation
-.\" .hy enable hyphenation
-.\" .ad l left justify
-.\" .ad b justify to both left and right margins
-.\" .nf disable filling
-.\" .fi enable filling
-.\" .br insert line break
-.\" .sp <n> insert n+1 empty lines
-.\" for manpage-specific macros, see man(7)
-.SH NAME
-kminspector \- run a program with the TDE memory leak tracer
-.SH SYNOPSIS
-.B kminspector
-\fIprogram\fP [ \fIprogram-args\fP ]
-.SH DESCRIPTION
-\fBKMinspector\fP runs the given program, examines its memory
-allocation behaviour using \fIlibktrace\fP and pipes the resulting
-allocation tree through \fIless\fP.
-.PP
-The given program does not need to be specially compiled.
-.PP
-This utility is provided with KMtrace,
-a TDE tool to assist with malloc debugging using
-glibc's "mtrace" functionality. Unfortunately the mtrace that is part of
-current (9/9/2000) glibc versions only logs the return-address of the
-malloc/free call. The library included with KMtrace
-logs a complete backtrace upon malloc/free.
-.PP
-This utility is part of the TDE Software Development Kit.
-.SH SEE ALSO
-.BR demangle (1),
-.BR kmmatch (1),
-.BR kmtrace (1).
-.PP
-Much more extensive documentation for KMtrace can be found in
-\fI/usr/share/doc/kmtrace/README\fP.
-.SH AUTHOR
-KMtrace was written by Waldo Bastian <bastian@kde.org>,
-Mike Haertel <mike@ai.mit.edu> and Andi Kleen <ak@suse.de>.
-.br
-This manual page was prepared by Ben Burton <bab@debian.org>
-for the Debian GNU/Linux system (but may be used by others).
diff --git a/ubuntu/maverick/tdesdk/debian/man/kmmatch.1 b/ubuntu/maverick/tdesdk/debian/man/kmmatch.1
deleted file mode 100644
index d80c15542..000000000
--- a/ubuntu/maverick/tdesdk/debian/man/kmmatch.1
+++ /dev/null
@@ -1,52 +0,0 @@
-.\" Hey, EMACS: -*- nroff -*-
-.\" First parameter, NAME, should be all caps
-.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
-.\" other parameters are allowed: see man(7), man(1)
-.TH KMMATCH 1 "February 26, 2003"
-.\" Please adjust this date whenever revising the manpage.
-.\"
-.\" Some roff macros, for reference:
-.\" .nh disable hyphenation
-.\" .hy enable hyphenation
-.\" .ad l left justify
-.\" .ad b justify to both left and right margins
-.\" .nf disable filling
-.\" .fi enable filling
-.\" .br insert line break
-.\" .sp <n> insert n+1 empty lines
-.\" for manpage-specific macros, see man(7)
-.SH NAME
-kmmatch \- search for symbols in a map file
-.SH SYNOPSIS
-.B kmmatch
-.I map-file call-file
-.SH DESCRIPTION
-\fBKMMatch\fP determines which symbols from a given set (\fIcall-file\fP) are
-present in a given map file.
-.PP
-The \fImap-file\fP should contain output from \fInm\fP (which extracts
-information from object files). It must \fBnot\fP contain any blank
-lines or header information (such as the name of the object file); this
-means you may need to strip the first few lines of \fInm\fP output from
-the \fImap-file\fP.
-.PP
-The \fIcall-file\fP should contain a list of symbols (such as function
-calls made by a program), one per line.
-.PP
-This utility will find which of the symbols in \fIcall-file\fP are
-present in \fImap-file\fP and write them to standard error, one per
-line, in the order in which they appear in \fIcall-file\fP.
-.PP
-Note that this utility is called \fBmatch\fP in the original TDE
-distribution; it has been renamed to \fBkmmatch\fP in Debian to
-avoid conflicts with unrelated packages.
-.PP
-This utility is part of the TDE Software Development Kit.
-.SH SEE ALSO
-.BR demangle (1),
-.BR kminspector (1),
-.BR kmtrace (1),
-.BR nm (1).
-.SH AUTHOR
-This manual page was prepared by Ben Burton <bab@debian.org>
-for the Debian GNU/Linux system (but may be used by others).
diff --git a/ubuntu/maverick/tdesdk/debian/man/kmtrace.1 b/ubuntu/maverick/tdesdk/debian/man/kmtrace.1
deleted file mode 100644
index 14f5f9fc8..000000000
--- a/ubuntu/maverick/tdesdk/debian/man/kmtrace.1
+++ /dev/null
@@ -1,72 +0,0 @@
-.\" Hey, EMACS: -*- nroff -*-
-.\" First parameter, NAME, should be all caps
-.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
-.\" other parameters are allowed: see man(7), man(1)
-.TH KMTRACE 1 "February 25, 2003"
-.\" Please adjust this date whenever revising the manpage.
-.\"
-.\" Some roff macros, for reference:
-.\" .nh disable hyphenation
-.\" .hy enable hyphenation
-.\" .ad l left justify
-.\" .ad b justify to both left and right margins
-.\" .nf disable filling
-.\" .fi enable filling
-.\" .br insert line break
-.\" .sp <n> insert n+1 empty lines
-.\" for manpage-specific macros, see man(7)
-.SH NAME
-kmtrace \- a TDE memory leak tracer
-.SH SYNOPSIS
-.B kmtrace
-[ \fIgeneric-options\fP ]
-[ \fB\-x, \-\-exclude\fP \fIfile\fP ]
-[ \fB\-e, \-\-exe\fP \fIfile\fP ]
-[ \fB\-t, \-\-tree\fP \fIfile\fP
-[ \fB\-\-th, \-\-treethreshold\fP \fIvalue\fP ]
-[ \fB\-\-td, \-\-treedepth\fP \fIvalue\fP ]]
-[ \fItrace-log\fP ]
-.SH DESCRIPTION
-\fBKMtrace\fP is a TDE tool to assist with malloc debugging using
-glibc's "mtrace" functionality. Unfortunately the mtrace that is part of
-current (9/9/2000) glibc versions only logs the return-address of the
-malloc/free call. The library included with KMtrace
-logs a complete backtrace upon malloc/free.
-.PP
-KMtrace will investigate the trace log specified on the command line,
-or \fIktrace.out\fP if no trace log is specified.
-.PP
-This utility is part of the TDE Software Development Kit.
-.SH OPTIONS
-Below are the kmtrace-specific options.
-For a full summary of options, run \fIkmtrace \-\-help\fP.
-.TP
-\fB\-x, \-\-exclude\fP \fIfile\fP
-File containing symbols to exclude from output.
-.TP
-\fB\-e, \-\-exe\fP \fIfile\fP
-Executable to use for looking up unknown symbols.
-.TP
-\fB\-t, \-\-tree\fP \fIfile\fP
-Write a tree of the allocations to the given file.
-.TP
-\fB\-\-th, \-\-treethreshold\fP \fIvalue\fP
-When writing the allocations tree, hide subtrees allocating less than the
-given memory amount.
-.TP
-\fB\-\-td, \-\-treedepth\fP \fIvalue\fP
-When writing the allocations tree, hide subtrees that are deeper than the
-specified depth.
-.SH SEE ALSO
-.BR demangle (1),
-.BR kminspector (1),
-.BR kmmatch (1).
-.PP
-Much more extensive documentation can be found in
-\fI/usr/share/doc/kmtrace/README\fP.
-.SH AUTHOR
-KMtrace was written by Waldo Bastian <bastian@kde.org>,
-Mike Haertel <mike@ai.mit.edu> and Andi Kleen <ak@suse.de>.
-.br
-This manual page was prepared by Ben Burton <bab@debian.org>
-for the Debian GNU/Linux system (but may be used by others).
diff --git a/ubuntu/maverick/tdesdk/debian/man/kompare.1 b/ubuntu/maverick/tdesdk/debian/man/kompare.1
deleted file mode 100644
index e777752e1..000000000
--- a/ubuntu/maverick/tdesdk/debian/man/kompare.1
+++ /dev/null
@@ -1,79 +0,0 @@
-.\" Hey, EMACS: -*- nroff -*-
-.\" First parameter, NAME, should be all caps
-.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
-.\" other parameters are allowed: see man(7), man(1)
-.TH KOMPARE 1 "March 25, 2005"
-.\" Please adjust this date whenever revising the manpage.
-.\"
-.\" Some roff macros, for reference:
-.\" .nh disable hyphenation
-.\" .hy enable hyphenation
-.\" .ad l left justify
-.\" .ad b justify to both left and right margins
-.\" .nf disable filling
-.\" .fi enable filling
-.\" .br insert line break
-.\" .sp <n> insert n+1 empty lines
-.\" for manpage-specific macros, see man(7)
-.SH NAME
-kompare \- a TDE GUI for viewing differences between files
-.SH SYNOPSIS
-.B kompare
-[ \fIgeneric-options\fP ]
-.br
-.B kompare
-[ \fIgeneric-options\fP ] [ \fB\-c\fP ] \fIURL1 URL2\fP
-.br
-.B kompare
-[ \fIgeneric-options\fP ] [ \fB\-o\fP [ \fB\-n\fP ]] \fIdiff\fP
-.br
-.B kompare
-[ \fIgeneric-options\fP ] \fB\-b\fP \fIURL diff\fP
-.SH DESCRIPTION
-\fBKompare\fP is a graphical user interface for viewing the differences
-between two files. It will also optionally create a diff file.
-.PP
-Depending upon what is passed on the command line, Kompare can compare
-documents, display diff files and blend diff files back into original
-documents.
-.PP
-If an url is given as - then Kompare will read the corresponding file
-from standard input. Thus (for instance) Kompare can be used as:
-.PP
-.RS
-cvs diff | kompare \-o \-
-.RE
-.PP
-This utility is part of the TDE Software Development Kit.
-.SH OPTIONS
-Below are the kompare-specific options.
-For a full summary of options, run \fIkompare \-\-help\fP.
-.TP
-\fB\-b\fP \fIURL diff\fP
-Blends \fIdiff\fP into URL. \fIdiff\fP is expected to be diff output and
-\fIURL\fP the file or folder that the diff output needs to be blended into.
-.TP
-\fB\-c\fP \fIURL1 URL2\fP
-Compares \fIURL1\fP with \fIURL2\fP. This is the default mode if two
-URLs are passed.
-.TP
-\fB\-n\fP
-Used with \fB\-o\fP to stop Kompare from checking for the original file.
-.TP
-\fB\-o\fP \fIdiff\fP
-Opens the given diff file. This is the default mode if only one URL is
-passed.
-.br
-Kompare will check to see if it can find
-the original file(s). If it can, it will blend the original file(s) into
-the diff output and show the result in the viewer. Passing \fB\-n\fP
-will disable this check.
-.SH SEE ALSO
-The original documentation from the program author
-is available in \fI/usr/share/doc/kompare/\fP.
-.SH AUTHOR
-Kompare was written by John Firebaugh <jfirebaugh@kde.org>,
-Otto Bruggeman <otto.bruggeman@home.nl> and others.
-.br
-This manual page was prepared by Ben Burton <bab@debian.org>
-for the Debian GNU/Linux system (but may be used by others).
diff --git a/ubuntu/maverick/tdesdk/debian/man/kuiviewer.1 b/ubuntu/maverick/tdesdk/debian/man/kuiviewer.1
deleted file mode 100644
index 5439127ae..000000000
--- a/ubuntu/maverick/tdesdk/debian/man/kuiviewer.1
+++ /dev/null
@@ -1,65 +0,0 @@
-.\" Hey, EMACS: -*- nroff -*-
-.\" First parameter, NAME, should be all caps
-.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
-.\" other parameters are allowed: see man(7), man(1)
-.TH KUIVIEWER 1 "March 25, 2005"
-.\" Please adjust this date whenever revising the manpage.
-.\"
-.\" Some roff macros, for reference:
-.\" .nh disable hyphenation
-.\" .hy enable hyphenation
-.\" .ad l left justify
-.\" .ad b justify to both left and right margins
-.\" .nf disable filling
-.\" .fi enable filling
-.\" .br insert line break
-.\" .sp <n> insert n+1 empty lines
-.\" for manpage-specific macros, see man(7)
-.SH NAME
-kuiviewer \- a viewer for Qt Designer user interface files
-.SH SYNOPSIS
-.B kuiviewer
-.RI "[ " generic-options " ]"
-.RI "[ " ui-file ... " ]"
-.PP
-.B kuiviewer
-.RI "[ " generic-options " ]"
-{ \fB\-s, \-\-takescreenshot\fP \fIfilename\fP }
-[ \fB\-w, \-\-screenshotwidth\fP \fIint\fP ]
-[ \fB\-h, \-\-screenshotheight\fP \fIint\fP ]
-.I ui-file
-.SH DESCRIPTION
-\fBKUIViewer\fP is a utility to display and test the user interface (.ui)
-files generated by \fBQt Designer\fP. The interfaces can be displayed in a
-variety of different widget styles.
-.PP
-Normally KUIViewer launches a full GUI, allowing the user to interact with
-the given interface.
-By passing the \fB\-\-takescreenshot\fP option, you can make KUIViewer dump a
-screenshot of the interface instead and exit immediately. Other options
-are available to control precisely how this screenshot is constructed.
-.PP
-This application is part of the TDE Software Development Kit.
-.SH OPTIONS
-Below are the kuiviewer-specific options.
-For a full summary of options, run \fIkuiviewer \-\-help\fP.
-.TP
-\fB\-s, \-\-takescreenshot\fP \fIfilename\fP
-Take a screenshot of the given interface and exit immediately.
-The \fIfilename\fP argument specifies where the screenshot will be saved.
-This screenshot will be saved in PNG format.
-.TP
-\fB\-w, \-\-screenshotwidth\fP \fIint\fP
-Before taking a screenshot, resize the interface to the given width.
-.TP
-\fB\-h, \-\-screenshotheight\fP \fIint\fP
-Before taking a screenshot, resize the interface to the given height.
-.SH SEE ALSO
-.BR designer (1).
-.SH AUTHOR
-KUIViewer was written by Richard Moore <rich@kde.org>,
-Ian Reinhart Geiser <geiseri@kde.org> and
-Benjamin C. Meyer <ben+kuiviewer@meyerhome.net>.
-.br
-This manual page was prepared by Ben Burton <bab@debian.org>
-for the Debian GNU/Linux system (but may be used by others).
diff --git a/ubuntu/maverick/tdesdk/debian/man/licensecheck.1 b/ubuntu/maverick/tdesdk/debian/man/licensecheck.1
deleted file mode 100644
index 48728f2c2..000000000
--- a/ubuntu/maverick/tdesdk/debian/man/licensecheck.1
+++ /dev/null
@@ -1,37 +0,0 @@
-.\" Hey, EMACS: -*- nroff -*-
-.\" First parameter, NAME, should be all caps
-.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
-.\" other parameters are allowed: see man(7), man(1)
-.TH LICENSECHECK 1 "January 31, 2004"
-.\" Please adjust this date whenever revising the manpage.
-.\"
-.\" Some roff macros, for reference:
-.\" .nh disable hyphenation
-.\" .hy enable hyphenation
-.\" .ad l left justify
-.\" .ad b justify to both left and right margins
-.\" .nf disable filling
-.\" .fi enable filling
-.\" .br insert line break
-.\" .sp <n> insert n+1 empty lines
-.\" for manpage-specific macros, see man(7)
-.SH NAME
-licensecheck \- simple license checker for source files
-.SH SYNOPSIS
-.B licensecheck
-.RB "[ " \-v " ]"
-\fIfile\fP ...
-.SH DESCRIPTION
-\fBlicensecheck\fP examines the comments at the beginning of each given
-source file and tries to determine which license the file is placed
-under. It does this by searching for blocks of text that it recognises
-as belonging to various licenses.
-.PP
-This utility is part of the TDE Software Development Kit.
-.SH OPTIONS
-.TP
-.B \-v
-Verbose mode.
-.SH AUTHOR
-This manual page was prepared by Ben Burton <bab@debian.org>
-for the Debian GNU/Linux system (but may be used by others).
diff --git a/ubuntu/maverick/tdesdk/debian/man/makeobj.1 b/ubuntu/maverick/tdesdk/debian/man/makeobj.1
deleted file mode 100644
index 50a9f864f..000000000
--- a/ubuntu/maverick/tdesdk/debian/man/makeobj.1
+++ /dev/null
@@ -1,66 +0,0 @@
-.\" Hey, EMACS: -*- nroff -*-
-.\" First parameter, NAME, should be all caps
-.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
-.\" other parameters are allowed: see man(7), man(1)
-.TH MAKEOBJ 1 "March 20, 2005"
-.\" Please adjust this date whenever revising the manpage.
-.\"
-.\" Some roff macros, for reference:
-.\" .nh disable hyphenation
-.\" .hy enable hyphenation
-.\" .ad l left justify
-.\" .ad b justify to both left and right margins
-.\" .nf disable filling
-.\" .fi enable filling
-.\" .br insert line break
-.\" .sp <n> insert n+1 empty lines
-.\" for manpage-specific macros, see man(7)
-.SH NAME
-makeobj \- run make from the correct directory
-.SH SYNOPSIS
-.B makeobj
-[ \fImake-argument\fP ... ]
-.SH DESCRIPTION
-\fBmakeobj\fP is a wrapper around \fBmake\fP which basically checks
-whether it's in the source directory or the build directory and changes
-to the correct directory before calling make.
-.PP
-The command-line arguments will (generally) be passed directly to make.
-.PP
-This script is useful if the source directory is different from the
-build directory and the Makefiles are kept in the build directory, as is
-common for instance when building the TDE sources. This script can however
-be used in more standard scenarios (such as non-TDE projects for which the
-source and build directories are the same), where it will behave just like
-make.
-.PP
-One of the environment variables OBJ_SUBDIR or OBJ_REPLACEMENT
-should be set to indicate where the build directory is in relation to
-the source directory.
-.PP
-This utility is part of the TDE Software Development Kit.
-.SH ENVIRONMENT VARIABLES
-Note that only one of OBJ_SUBDIR and OBJ_REPLACEMENT should be used.
-If the build directory is simply a subdirectory of the source directory,
-the simpler variable OBJ_SUBDIR should be used.
-.TP
-OBJ_SUBDIR
-Indicates that the build directory is in the given subdirectory of the
-source directory. For instance, if the source directory is \fItdesdk\fP
-and the build directory is \fItdesdk/obj-i386-linux\fP, then OBJ_SUBDIR
-should be set to \fIobj-i386-linux\fP.
-.TP
-OBJ_REPLACEMENT
-A \fBsed\fP expression that is used to transform the source directory
-into the build directory.
-For instance, if the source directory is \fI~/src/tdesdk\fP and the
-build directory is \fI~/src/tdesdk-obj\fP, then OBJ_REPLACEMENT could
-be set to \fIs#src/tdesdk#src/tdesdk-obj#\fP.
-.SH SEE ALSO
-.BR make (1),
-.BR sed (1).
-.SH AUTHOR
-makeobj was written by Stephan Kulow <coolo@kde.org>.
-.br
-This manual page was prepared by Ben Burton <bab@debian.org>
-for the Debian GNU/Linux system (but may be used by others).
diff --git a/ubuntu/maverick/tdesdk/debian/man/memprof2calltree.1 b/ubuntu/maverick/tdesdk/debian/man/memprof2calltree.1
deleted file mode 100644
index d4f52ead4..000000000
--- a/ubuntu/maverick/tdesdk/debian/man/memprof2calltree.1
+++ /dev/null
@@ -1,36 +0,0 @@
-.\" Hey, EMACS: -*- nroff -*-
-.\" First parameter, NAME, should be all caps
-.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
-.\" other parameters are allowed: see man(7), man(1)
-.TH MEMPROF2CALLTREE 1 "October 15, 2004"
-.\" Please adjust this date whenever revising the manpage.
-.\"
-.\" Some roff macros, for reference:
-.\" .nh disable hyphenation
-.\" .hy enable hyphenation
-.\" .ad l left justify
-.\" .ad b justify to both left and right margins
-.\" .nf disable filling
-.\" .fi enable filling
-.\" .br insert line break
-.\" .sp <n> insert n+1 empty lines
-.\" for manpage-specific macros, see man(7)
-.SH NAME
-memprof2calltree \- convert memprof profiling data to KCachegrind calltree format
-.SH SYNOPSIS
-.B memprof2calltree
-.SH DESCRIPTION
-\fBmemprof2calltree\fP reads the memory profiles of memprof and
-converts them into calltree format for use by KCachegrind.
-.PP
-The memprof data must be supplied on standard input, and the
-corresponding calltree data will be written to standard output.
-.PP
-This utility is part of the TDE Software Development Kit.
-.SH SEE ALSO
-.BR tdecachegrind (1).
-.SH AUTHOR
-This converter was written by Josef Weidendorfer <Josef.Weidendorfer@gmx.de>.
-.br
-This manual page was prepared by Ben Burton <bab@debian.org>
-for the Debian GNU/Linux system (but may be used by others).
diff --git a/ubuntu/maverick/tdesdk/debian/man/op2calltree.1 b/ubuntu/maverick/tdesdk/debian/man/op2calltree.1
deleted file mode 100644
index 0242e6cd6..000000000
--- a/ubuntu/maverick/tdesdk/debian/man/op2calltree.1
+++ /dev/null
@@ -1,43 +0,0 @@
-.\" Hey, EMACS: -*- nroff -*-
-.\" First parameter, NAME, should be all caps
-.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
-.\" other parameters are allowed: see man(7), man(1)
-.TH OP2CALLTREE 1 "October 15, 2004"
-.\" Please adjust this date whenever revising the manpage.
-.\"
-.\" Some roff macros, for reference:
-.\" .nh disable hyphenation
-.\" .hy enable hyphenation
-.\" .ad l left justify
-.\" .ad b justify to both left and right margins
-.\" .nf disable filling
-.\" .fi enable filling
-.\" .br insert line break
-.\" .sp <n> insert n+1 empty lines
-.\" for manpage-specific macros, see man(7)
-.SH NAME
-op2calltree \- convert OProfile profiling data to KCachegrind calltree format
-.SH SYNOPSIS
-.B op2calltree
-.SH DESCRIPTION
-\fBop2calltree\fP reads the profiling data output by OProfile v0.8 and
-converts it into calltree format for use by KCachegrind.
-.PP
-The OProfile data must be supplied on standard input, and should be
-obtained by running:
-.PP
-.RS
-opreport \-gdf
-.RE
-.PP
-This converter will then write a separate calltree data file for each
-application, to a file of the form \fIoprof.out.<app>\fP.
-.PP
-This utility is part of the TDE Software Development Kit.
-.SH SEE ALSO
-.BR tdecachegrind (1).
-.SH AUTHOR
-This converter was written by Josef Weidendorfer <Josef.Weidendorfer@gmx.de>.
-.br
-This manual page was prepared by Ben Burton <bab@debian.org>
-for the Debian GNU/Linux system (but may be used by others).
diff --git a/ubuntu/maverick/tdesdk/debian/man/package_crystalsvg.1 b/ubuntu/maverick/tdesdk/debian/man/package_crystalsvg.1
deleted file mode 100644
index 32d8644e9..000000000
--- a/ubuntu/maverick/tdesdk/debian/man/package_crystalsvg.1
+++ /dev/null
@@ -1,41 +0,0 @@
-.\" Hey, EMACS: -*- nroff -*-
-.\" First parameter, NAME, should be all caps
-.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
-.\" other parameters are allowed: see man(7), man(1)
-.TH PACKAGE_CRYSTALSVG 1 "October 15, 2004"
-.\" Please adjust this date whenever revising the manpage.
-.\"
-.\" Some roff macros, for reference:
-.\" .nh disable hyphenation
-.\" .hy enable hyphenation
-.\" .ad l left justify
-.\" .ad b justify to both left and right margins
-.\" .nf disable filling
-.\" .fi enable filling
-.\" .br insert line break
-.\" .sp <n> insert n+1 empty lines
-.\" for manpage-specific macros, see man(7)
-.SH NAME
-package_crystalsvg \- bundle up Crystal SVG sources from a TDE checkout
-.SH SYNOPSIS
-.B package_crystalsvg
-.SH DESCRIPTION
-\fBpackage_crystalsvg\fP assumes that the current directory contains one
-or more checked-out TDE modules. It searches these modules for Crystal
-SVG vector sources (.svgz or .svg.gz files)
-and packages them up into a tarball. The tarball will also
-contain \fIFILES\fP (describing the contents of the tarball and which
-TDE modules/paths they were copied from) as well as some other bits and
-pieces.
-.PP
-Note that you must at least have tdelibs checked out for this utility to
-run.
-.PP
-The final tarball will be created in the current working directory.
-.PP
-This utility is part of the TDE Software Development Kit.
-.SH AUTHOR
-package_crystalsvg was written by Frans Englich <frans.englich@telia.com>.
-.br
-This manual page was prepared by Ben Burton <bab@debian.org>
-for the Debian GNU/Linux system (but may be used by others).
diff --git a/ubuntu/maverick/tdesdk/debian/man/png2mng.pl.1 b/ubuntu/maverick/tdesdk/debian/man/png2mng.pl.1
deleted file mode 100644
index c86c17275..000000000
--- a/ubuntu/maverick/tdesdk/debian/man/png2mng.pl.1
+++ /dev/null
@@ -1,49 +0,0 @@
-.\" Hey, EMACS: -*- nroff -*-
-.\" First parameter, NAME, should be all caps
-.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
-.\" other parameters are allowed: see man(7), man(1)
-.TH PNG2MNG.PL 1 "October 15, 2004"
-.\" Please adjust this date whenever revising the manpage.
-.\"
-.\" Some roff macros, for reference:
-.\" .nh disable hyphenation
-.\" .hy enable hyphenation
-.\" .ad l left justify
-.\" .ad b justify to both left and right margins
-.\" .nf disable filling
-.\" .fi enable filling
-.\" .br insert line break
-.\" .sp <n> insert n+1 empty lines
-.\" for manpage-specific macros, see man(7)
-.SH NAME
-png2mng.pl \- combine a set of PNG images into an animated MNG image
-.SH SYNOPSIS
-.B png2mng.pl
-.I basename width height
-.SH DESCRIPTION
-\fBpng2mng.pl\fP reads a sequence of PNG images and combines them into
-a single animated MNG image.
-.PP
-The individual PNG images should be numbered consecutively from zero up,
-and should have names of the form
-.I basenameXXXX
-where
-.I XXXX
-is the four-digit sequence number (0000, 0001, 0002, etc).
-The width and height of the PNG images should
-also be included on the command line.
-.PP
-The final animated MNG image will be written to standard output.
-.PP
-This utility is part of the TDE Software Development Kit.
-.SH EXAMPLE
-The following example will combine the files hi32-action-kde-0000.png,
-hi32-action-kde-0001.png, hi32-action-kde-0002.png, etc., and write
-the resulting animated image to hi32-action-kde.mng:
-.PP
-.RS
-png2mng.pl hi32-action-kde- 32 32 > hi32-action-kde.mng
-.RE
-.SH AUTHOR
-This manual page was prepared by Ben Burton <bab@debian.org>
-for the Debian GNU/Linux system (but may be used by others).
diff --git a/ubuntu/maverick/tdesdk/debian/man/po2xml.1 b/ubuntu/maverick/tdesdk/debian/man/po2xml.1
deleted file mode 100644
index d2f7fe5df..000000000
--- a/ubuntu/maverick/tdesdk/debian/man/po2xml.1
+++ /dev/null
@@ -1,40 +0,0 @@
-.\" Hey, EMACS: -*- nroff -*-
-.\" First parameter, NAME, should be all caps
-.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
-.\" other parameters are allowed: see man(7), man(1)
-.TH PO2XML 1 "March 19, 2005"
-.\" Please adjust this date whenever revising the manpage.
-.\"
-.\" Some roff macros, for reference:
-.\" .nh disable hyphenation
-.\" .hy enable hyphenation
-.\" .ad l left justify
-.\" .ad b justify to both left and right margins
-.\" .nf disable filling
-.\" .fi enable filling
-.\" .br insert line break
-.\" .sp <n> insert n+1 empty lines
-.\" for manpage-specific macros, see man(7)
-.SH NAME
-po2xml \- translates a DocBook XML file using a PO-file
-.SH SYNOPSIS
-.B po2xml
-.I original-XML translated-PO
-.SH DESCRIPTION
-\fBpo2xml\fP is a command-line tool that translates the DocBook
-XML file \fIoriginal-XML\fP using the gettext message file
-\fItranslated-PO\fP. The resulting translated XML file is sent to standard
-output.
-.PP
-This utility is part of the TDE Software Development Kit.
-.SH SEE ALSO
-.BR split2po (1),
-.BR swappo (1),
-.BR transxx (1),
-.BR xml2pot (1).
-.SH AUTHOR
-The PO-XML tools were written by Stephan Kulow <coolo@kde.org> and
-Peter Wells <pete@yamuna.demon.co.uk>.
-.br
-This manual page was prepared by Ben Burton <bab@debian.org>
-for the Debian GNU/Linux system (but may be used by others).
diff --git a/ubuntu/maverick/tdesdk/debian/man/pprof2calltree.1 b/ubuntu/maverick/tdesdk/debian/man/pprof2calltree.1
deleted file mode 100644
index b5cf9082c..000000000
--- a/ubuntu/maverick/tdesdk/debian/man/pprof2calltree.1
+++ /dev/null
@@ -1,52 +0,0 @@
-.\" Hey, EMACS: -*- nroff -*-
-.\" First parameter, NAME, should be all caps
-.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
-.\" other parameters are allowed: see man(7), man(1)
-.TH PPROF2CALLTREE 1 "October 15, 2004"
-.\" Please adjust this date whenever revising the manpage.
-.\"
-.\" Some roff macros, for reference:
-.\" .nh disable hyphenation
-.\" .hy enable hyphenation
-.\" .ad l left justify
-.\" .ad b justify to both left and right margins
-.\" .nf disable filling
-.\" .fi enable filling
-.\" .br insert line break
-.\" .sp <n> insert n+1 empty lines
-.\" for manpage-specific macros, see man(7)
-.SH NAME
-pprof2calltree \- convert APD profiling data to KCachegrind calltree format
-.SH SYNOPSIS
-.B pprof2calltree
-\fB\-f\fP \fIinput\fP
-.SH DESCRIPTION
-\fBpprof2calltree\fP reads the pprof profiling data output by
-APD (http://pecl.php.net/apd/), and converts it into calltree format
-for use by KCachegrind.
-.PP
-This utility is part of the TDE Software Development Kit.
-.SH OPTIONS
-.TP
-\fB\-f\fP \fIinput\fP
-Specifies the APD pprof trace file to convert. This generally has a
-name of the form \fIpprof.XXXXX.Y\fP. The calltree output for
-KCachegrind will then be written to the file \fIcachegrind.out.XXXXX.Y\fP.
-.SH EXAMPLE
-Suppose you profile a script with APD and obtain the pprof trace file
-\fIpprof.12345.1\fP. You can then work with this data in KCachegrind as
-follows.
-.PP
-.RS
-pprof2calltree -f pprof.12345.1
-.br
-tdecachegrind cachegrind.out.12345.1
-.RE
-.PP
-.SH SEE ALSO
-.BR tdecachegrind (1).
-.SH AUTHOR
-This converter was written by George Schlossnagle <george@omniti.com>.
-.br
-This manual page was prepared by Ben Burton <bab@debian.org>
-for the Debian GNU/Linux system (but may be used by others).
diff --git a/ubuntu/maverick/tdesdk/debian/man/pruneemptydirs.1 b/ubuntu/maverick/tdesdk/debian/man/pruneemptydirs.1
deleted file mode 100644
index 108c7e4db..000000000
--- a/ubuntu/maverick/tdesdk/debian/man/pruneemptydirs.1
+++ /dev/null
@@ -1,65 +0,0 @@
-.\" Hey, EMACS: -*- nroff -*-
-.\" First parameter, NAME, should be all caps
-.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
-.\" other parameters are allowed: see man(7), man(1)
-.TH PRUNEEMPTYDIRS 1 "September 27, 2002"
-.\" Please adjust this date whenever revising the manpage.
-.\"
-.\" Some roff macros, for reference:
-.\" .nh disable hyphenation
-.\" .hy enable hyphenation
-.\" .ad l left justify
-.\" .ad b justify to both left and right margins
-.\" .nf disable filling
-.\" .fi enable filling
-.\" .br insert line break
-.\" .sp <n> insert n+1 empty lines
-.\" for manpage-specific macros, see man(7)
-.SH NAME
-pruneemptydirs \- detects stale source dirs in a CVS tree
-.SH SYNOPSIS
-.B pruneemptydirs
-[ \fB\-f\fP ]
-.SH DESCRIPTION
-\fBpruneemptydirs\fP is used to clean up a local CVS tree.
-It detects directories containing remnants of old stuff which has been
-removed from the CVS. Such stale directories often break compilation.
-The current directory and all directories beneath it will be examined.
-.PP
-Note that this tool does not remove anything; it simply prints what to
-do as a series of remove commands. You can copy and paste these commands,
-or use them with eval in a script.
-.PP
-This tool works better if the source directory is not the same as the
-build directory, since it will not print directories containing old
-executables.
-.PP
-This utility is part of the TDE Software Development Kit.
-.SH OPTIONS
-.TP
-\fB\-f\fP
-Actually perform the deletions instead of just printing them out.
-Use this option with care (no warranties, etc.)!
-.SH ENVIRONMENT VARIABLES
-One of the following variables (but not both) should be set if the source
-directory is different from the build directory.
-If the build directory is simply a subdirectory of the source directory,
-the simpler variable OBJ_SUBDIR should be used.
-.TP
-OBJ_SUBDIR
-Indicates that the build directory is in the given subdirectory of the
-source directory. For instance, if the source directory is \fItdesdk\fP
-and the build directory is \fItdesdk/obj-i386-linux\fP, then OBJ_SUBDIR
-should be set to \fIobj-i386-linux\fP.
-.TP
-OBJ_REPLACEMENT
-A \fBsed\fP expression that is used to transform the source directory
-into the build directory.
-For instance, if the source directory is \fI~/src/tdesdk\fP and the
-build directory is \fI~/src/tdesdk-obj\fP, then OBJ_REPLACEMENT could
-be set to \fIs#tdesdk#tdesdk-obj#\fP.
-.SH AUTHOR
-pruneemptydirs was written by David Faure <faure@kde.org>.
-.br
-This manual page was prepared by Ben Burton <bab@debian.org>
-for the Debian GNU/Linux system (but may be used by others).
diff --git a/ubuntu/maverick/tdesdk/debian/man/qtdoc.1 b/ubuntu/maverick/tdesdk/debian/man/qtdoc.1
deleted file mode 100644
index 3b7c09f60..000000000
--- a/ubuntu/maverick/tdesdk/debian/man/qtdoc.1
+++ /dev/null
@@ -1,50 +0,0 @@
-.\" Hey, EMACS: -*- nroff -*-
-.\" First parameter, NAME, should be all caps
-.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
-.\" other parameters are allowed: see man(7), man(1)
-.TH QTDOC 1 "January 31, 2004"
-.\" Please adjust this date whenever revising the manpage.
-.\"
-.\" Some roff macros, for reference:
-.\" .nh disable hyphenation
-.\" .hy enable hyphenation
-.\" .ad l left justify
-.\" .ad b justify to both left and right margins
-.\" .nf disable filling
-.\" .fi enable filling
-.\" .br insert line break
-.\" .sp <n> insert n+1 empty lines
-.\" for manpage-specific macros, see man(7)
-.SH NAME
-qtdoc \- view documentation for a Qt class
-.SH SYNOPSIS
-.B qtdoc
-.RI "[ " classname " ]"
-.SH DESCRIPTION
-\fBqtdoc\fP opens a Qt help page in kfm/konqueror.
-If \fIclassname\fP is given, it opens the help page for that class (note
-that the class name is case insensitive). Otherwise the main Qt help
-page is opened. It is assumed that you have the Qt documentation
-installed.
-.PP
-This utility is part of the TDE Software Development Kit.
-.SH ENVIRONMENT VARIABLES
-.TP
-QTDIR
-The directory beneath which the Qt documentation is installed.
-Thus the main Qt help page should be in \fI$QTDIR/doc/html/\fP.
-If $QTDIR is not set, \fI/usr/share/qt3\fP will be assumed.
-.SH EXAMPLES
-To bring up help on class QString:
-.PP
-.RS
-qtdoc QString
-.RE
-.SH DEBIAN USERS
-The Qt documentation is in the Debian package \fIqt3-doc\fP, which will
-need to be installed.
-.SH SEE ALSO
-.BR kdedoc (1).
-.SH AUTHOR
-This manual page was prepared by Ben Burton <bab@debian.org>
-for the Debian GNU/Linux system (but may be used by others).
diff --git a/ubuntu/maverick/tdesdk/debian/man/split2po.1 b/ubuntu/maverick/tdesdk/debian/man/split2po.1
deleted file mode 100644
index 539e2f6c8..000000000
--- a/ubuntu/maverick/tdesdk/debian/man/split2po.1
+++ /dev/null
@@ -1,60 +0,0 @@
-.\" Hey, EMACS: -*- nroff -*-
-.\" First parameter, NAME, should be all caps
-.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
-.\" other parameters are allowed: see man(7), man(1)
-.TH SPLIT2PO 1 "March 19, 2005"
-.\" Please adjust this date whenever revising the manpage.
-.\"
-.\" Some roff macros, for reference:
-.\" .nh disable hyphenation
-.\" .hy enable hyphenation
-.\" .ad l left justify
-.\" .ad b justify to both left and right margins
-.\" .nf disable filling
-.\" .fi enable filling
-.\" .br insert line break
-.\" .sp <n> insert n+1 empty lines
-.\" for manpage-specific macros, see man(7)
-.SH NAME
-split2po \- creates a PO-file from two DocBook XML files
-.SH SYNOPSIS
-.B split2po
-.I original-XML translated-XML
-.SH DESCRIPTION
-\fBsplit2po\fP is a command-line tool that takes the two given DocBook
-XML files and produces a gettext message file (PO-file) that represents
-the changes between them. The resulting PO-file is sent to standard
-output.
-.PP
-.I translated-XML
-must be the result of translating
-.I original-XML
-into another language. It is this translation that the resulting
-PO-file will represent.
-.PP
-This utility is part of the TDE Software Development Kit.
-.SH ENVIRONMENT VARIABLES
-.TP
-NO_CREDITS
-If set, the "ROLES_OF_TRANSLATORS" and "CREDIT_FOR_TRANSLATORS" messages
-will be omitted. By default these are always included at the end of
-the PO-file, with empty message strings.
-.br
-These messages are used with TDE documentation, so you may wish to set
-NO_CREDITS if you are working with some other type of non-TDE documentation.
-.TP
-REPORT_MISMATCHES
-Set this variable to "no" if you wish mismatch reporting to be
-suppressed. By default, any apparent mismatches between the two XML
-files will be noted on standard error.
-.SH SEE ALSO
-.BR po2xml (1),
-.BR swappo (1),
-.BR transxx (1),
-.BR xml2pot (1).
-.SH AUTHOR
-The PO-XML tools were written by Stephan Kulow <coolo@kde.org> and
-Peter Wells <pete@yamuna.demon.co.uk>.
-.br
-This manual page was prepared by Ben Burton <bab@debian.org>
-for the Debian GNU/Linux system (but may be used by others).
diff --git a/ubuntu/maverick/tdesdk/debian/man/swappo.1 b/ubuntu/maverick/tdesdk/debian/man/swappo.1
deleted file mode 100644
index bb1289d9b..000000000
--- a/ubuntu/maverick/tdesdk/debian/man/swappo.1
+++ /dev/null
@@ -1,44 +0,0 @@
-.\" Hey, EMACS: -*- nroff -*-
-.\" First parameter, NAME, should be all caps
-.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
-.\" other parameters are allowed: see man(7), man(1)
-.TH SWAPPO 1 "March 19, 2005"
-.\" Please adjust this date whenever revising the manpage.
-.\"
-.\" Some roff macros, for reference:
-.\" .nh disable hyphenation
-.\" .hy enable hyphenation
-.\" .ad l left justify
-.\" .ad b justify to both left and right margins
-.\" .nf disable filling
-.\" .fi enable filling
-.\" .br insert line break
-.\" .sp <n> insert n+1 empty lines
-.\" for manpage-specific macros, see man(7)
-.SH NAME
-swappo \- swap msgid and msgstr fields in a PO-file
-.SH SYNOPSIS
-.B swappo
-.I PO-file
-.SH DESCRIPTION
-\fBswappo\fP reads the given PO-file and swaps the \fImsgid\fP and
-\fImsgstr\fP fields for every message. The result is a new PO-file that
-translates in the opposite direction. For example, if \fIPO-file\fP
-translates from English to French, the new PO-file will translate from
-French to English.
-.PP
-The new PO-file will be written to standard output. The old PO-file
-will remain untouched.
-.PP
-This utility is part of the TDE Software Development Kit.
-.SH SEE ALSO
-.BR po2xml (1),
-.BR split2po (1),
-.BR transxx (1),
-.BR xml2pot (1).
-.SH AUTHOR
-The PO-XML tools were written by Stephan Kulow <coolo@kde.org> and
-Peter Wells <pete@yamuna.demon.co.uk>.
-.br
-This manual page was prepared by Ben Burton <bab@debian.org>
-for the Debian GNU/Linux system (but may be used by others).
diff --git a/ubuntu/maverick/tdesdk/debian/man/tdecachegrind.1 b/ubuntu/maverick/tdesdk/debian/man/tdecachegrind.1
deleted file mode 100644
index d5f3ea064..000000000
--- a/ubuntu/maverick/tdesdk/debian/man/tdecachegrind.1
+++ /dev/null
@@ -1,67 +0,0 @@
-.\" Hey, EMACS: -*- nroff -*-
-.\" First parameter, NAME, should be all caps
-.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
-.\" other parameters are allowed: see man(7), man(1)
-.TH TDECACHEGRIND 1 "March 25, 2005"
-.\" Please adjust this date whenever revising the manpage.
-.\"
-.\" Some roff macros, for reference:
-.\" .nh disable hyphenation
-.\" .hy enable hyphenation
-.\" .ad l left justify
-.\" .ad b justify to both left and right margins
-.\" .nf disable filling
-.\" .fi enable filling
-.\" .br insert line break
-.\" .sp <n> insert n+1 empty lines
-.\" for manpage-specific macros, see man(7)
-.SH NAME
-tdecachegrind \- a visualisation tool for valgrind profiling output
-.SH SYNOPSIS
-.B tdecachegrind
-.RI "[ " generic-options " ]"
-[ \fB\-r\fP \fIexec\fP ] [ \fItrace-file\fP ]
-.SH DESCRIPTION
-\fBKCachegrind\fP is a visualisation tool for the profiling data generated
-by \fBcalltree\fP, a profiling skin for \fBvalgrind\fP. Applications can be
-profiled using calltree without being recompiled, and shared libraries
-and plugin architectures are supported.
-.PP
-For visualising the output from other profiling tools, several converters
-are available. On Debian systems these can be found in the
-\fItdecachegrind-converters\fP package.
-.PP
-This application is part of the TDE Software Development Kit.
-.SH OPTIONS
-Below are the tdecachegrind-specific options.
-For a full summary of options, run \fItdecachegrind \-\-help\fP.
-.TP
-\fB\-r\fP \fIexec\fP
-Run the program \fIexec\fP under cachegrind.
-.TP
-\fItrace-file\fP
-Visualise data from the given trace.
-.SH SEE ALSO
-.BR calltree (1),
-.BR dprof2calltree (1),
-.BR hotshot2calltree (1),
-.BR memprof2calltree (1),
-.BR op2calltree (1),
-.BR pprof2calltree (1),
-.BR valgrind (1).
-.PP
-Full user documentation is available through the TDE Help Centre.
-You can also enter the URL
-\fIhelp:/tdecachegrind/\fP
-directly into konqueror or you can run
-`\fIkhelpcenter help:/tdecachegrind/\fP'
-from the command-line.
-.PP
-If the TDE Help Centre is not installed then you can install the package
-\fItdesdk-doc-html\fP and read this documentation in HTML format from
-\fI/usr/share/doc/tde/HTML/en/tdecachegrind/\fP.
-.SH AUTHOR
-KCachegrind was written by Josef Weidendorfer <Josef.Weidendorfer@gmx.de>.
-.br
-This manual page was prepared by Ben Burton <bab@debian.org>
-for the Debian GNU/Linux system (but may be used by others).
diff --git a/ubuntu/maverick/tdesdk/debian/man/tdekillall.1 b/ubuntu/maverick/tdesdk/debian/man/tdekillall.1
deleted file mode 100644
index 92bf4380c..000000000
--- a/ubuntu/maverick/tdesdk/debian/man/tdekillall.1
+++ /dev/null
@@ -1,36 +0,0 @@
-.\" Hey, EMACS: -*- nroff -*-
-.\" First parameter, NAME, should be all caps
-.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
-.\" other parameters are allowed: see man(7), man(1)
-.TH TDEKILLALL 1 "April 29, 2001"
-.\" Please adjust this date whenever revising the manpage.
-.\"
-.\" Some roff macros, for reference:
-.\" .nh disable hyphenation
-.\" .hy enable hyphenation
-.\" .ad l left justify
-.\" .ad b justify to both left and right margins
-.\" .nf disable filling
-.\" .fi enable filling
-.\" .br insert line break
-.\" .sp <n> insert n+1 empty lines
-.\" for manpage-specific macros, see man(7)
-.SH NAME
-tdekillall \- kills processes started with tdeinit
-.SH SYNOPSIS
-.B tdekillall
-[ \fB\-\fP\fIsignal\fP ] \fIprocess-name\fP
-.SH DESCRIPTION
-\fBtdekillall\fP kills all processes with a particular name
-that were started through tdeinit. Specifically, it kills all processes
-\fBtdeinit:\fP \fIprocess-name\fP.
-.PP
-This utility is part of the TDE Software Development Kit.
-.SH OPTIONS
-.TP
-\fB\-\fP\fIsignal\fP
-Kill the processes with signal \fIsignal\fP. This option defaults to
-SIGTERM. Run \fIkill \-l\fP for a list of possible signals.
-.SH AUTHOR
-This manual page was prepared by Ben Burton <bab@debian.org>
-for the Debian GNU/Linux system (but may be used by others).
diff --git a/ubuntu/maverick/tdesdk/debian/man/testkspy.1 b/ubuntu/maverick/tdesdk/debian/man/testkspy.1
deleted file mode 100644
index afdc702a4..000000000
--- a/ubuntu/maverick/tdesdk/debian/man/testkspy.1
+++ /dev/null
@@ -1,46 +0,0 @@
-.\" Hey, EMACS: -*- nroff -*-
-.\" First parameter, NAME, should be all caps
-.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
-.\" other parameters are allowed: see man(7), man(1)
-.TH TESTKSPY 1 "May 3, 2001"
-.\" Please adjust this date whenever revising the manpage.
-.\"
-.\" Some roff macros, for reference:
-.\" .nh disable hyphenation
-.\" .hy enable hyphenation
-.\" .ad l left justify
-.\" .ad b justify to both left and right margins
-.\" .nf disable filling
-.\" .fi enable filling
-.\" .br insert line break
-.\" .sp <n> insert n+1 empty lines
-.\" for manpage-specific macros, see man(7)
-.SH NAME
-testkspy \- show off KSpy's capabilities
-.SH SYNOPSIS
-.B testkspy
-.RI "[ " generic-options " ]"
-.SH DESCRIPTION
-\fBtestkspy\fP is a small application that shows off KSpy's capabilities.
-It simply uses KSpy to spy on itself.
-.PP
-\fBKSpy\fP is a tiny library which can be used to graphically display
-the TQObjects in use by a TQt/TDE app. In addition to the object tree,
-you can also view the properties, signals and slots of any QObject.
-.PP
-Basically it provides much the same info as QObject::dumpObjectTree() and
-QObject::dumpObjectInfo(), but in a much more convenient form. KSpy has
-minimal overhead for the application, because the kspy library is
-loaded dynamically using KLibLoader.
-.PP
-This utility is part of the TDE Software Development Kit.
-.SH OPTIONS
-For a full summary of options, run \fItestkspy \-\-help\fP.
-.SH SEE ALSO
-Instructions on using KSpy with your own applications can be found in
-\fI/usr/share/doc/kspy/README\fP.
-.SH AUTHOR
-KSpy was written by Richard Moore <rich@kde.org>.
-.br
-This manual page was prepared by Ben Burton <bab@debian.org>
-for the Debian GNU/Linux system (but may be used by others).
diff --git a/ubuntu/maverick/tdesdk/debian/man/transxx.1 b/ubuntu/maverick/tdesdk/debian/man/transxx.1
deleted file mode 100644
index 6dba22392..000000000
--- a/ubuntu/maverick/tdesdk/debian/man/transxx.1
+++ /dev/null
@@ -1,47 +0,0 @@
-.\" Hey, EMACS: -*- nroff -*-
-.\" First parameter, NAME, should be all caps
-.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
-.\" other parameters are allowed: see man(7), man(1)
-.TH TRANSXX 1 "March 19, 2005"
-.\" Please adjust this date whenever revising the manpage.
-.\"
-.\" Some roff macros, for reference:
-.\" .nh disable hyphenation
-.\" .hy enable hyphenation
-.\" .ad l left justify
-.\" .ad b justify to both left and right margins
-.\" .nf disable filling
-.\" .fi enable filling
-.\" .br insert line break
-.\" .sp <n> insert n+1 empty lines
-.\" for manpage-specific macros, see man(7)
-.SH NAME
-transxx \- create a basic fleshed-out PO-file from a PO-template file
-.SH SYNOPSIS
-.B transxx
-[ \fB\-\-text\fP \fItranslation\fP ]
-.I template
-.SH DESCRIPTION
-\fBtransxx\fP is a command-line tool that produces a basic fleshed-out
-PO-file from a PO-template file. Some of the formatting and
-structure of the \fImsgid\fP strings will be copied to the \fImsgstr\fP
-strings, but otherwise text will be translated to "xx".
-.PP
-The fleshed-out PO-file is sent to standard output.
-.PP
-This utility is part of the TDE Software Development Kit.
-.SH OPTIONS
-.TP
-\fB\-\-text\fP \fItranslation\fP
-Use the given translation everywhere instead of "xx".
-.SH SEE ALSO
-.BR po2xml (1),
-.BR split2po (1),
-.BR swappo (1),
-.BR xml2pot (1).
-.SH AUTHOR
-The PO-XML tools were written by Stephan Kulow <coolo@kde.org> and
-Peter Wells <pete@yamuna.demon.co.uk>.
-.br
-This manual page was prepared by Ben Burton <bab@debian.org>
-for the Debian GNU/Linux system (but may be used by others).
diff --git a/ubuntu/maverick/tdesdk/debian/man/umbrello.1 b/ubuntu/maverick/tdesdk/debian/man/umbrello.1
deleted file mode 100644
index 3c5d77d5e..000000000
--- a/ubuntu/maverick/tdesdk/debian/man/umbrello.1
+++ /dev/null
@@ -1,53 +0,0 @@
-.\" Hey, EMACS: -*- nroff -*-
-.\" First parameter, NAME, should be all caps
-.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
-.\" other parameters are allowed: see man(7), man(1)
-.TH UMBRELLO 1 "March 19, 2005"
-.\" Please adjust this date whenever revising the manpage.
-.\"
-.\" Some roff macros, for reference:
-.\" .nh disable hyphenation
-.\" .hy enable hyphenation
-.\" .ad l left justify
-.\" .ad b justify to both left and right margins
-.\" .nf disable filling
-.\" .fi enable filling
-.\" .br insert line break
-.\" .sp <n> insert n+1 empty lines
-.\" for manpage-specific macros, see man(7)
-.SH NAME
-umbrello \- a UML modelling tool and code generator
-.SH SYNOPSIS
-.B umbrello
-.RI "[ " generic-options " ]"
-[ \fIfile\fP ]
-.SH DESCRIPTION
-\fBUmbrello UML Modeller\fP is a Unified Modelling Language editor for TDE.
-With UML you can create diagrams of software and other systems in an
-industry standard format. Umbrello can also generate code from your
-UML diagrams in a number of programming languages.
-.PP
-The program supports class diagrams, sequence diagrams, collaboration
-diagrams, use case diagrams, state diagrams, activity diagrams, component
-diagrams and deployment diagrams.
-.PP
-This application is part of the TDE Software Development Kit.
-.SH OPTIONS
-For a full summary of options, run \fIumbrello \-\-help\fP.
-.SH SEE ALSO
-Full user documentation is available through the TDE Help Centre.
-You can also enter the URL
-\fIhelp:/umbrello/\fP
-directly into konqueror or you can run
-`\fIkhelpcenter help:/umbrello/\fP'
-from the command-line.
-.PP
-If the TDE Help Centre is not installed then you can install the package
-\fItdesdk-doc-html\fP and read this documentation in HTML format from
-\fI/usr/share/doc/tde/HTML/en/umbrello/\fP.
-.SH AUTHOR
-Umbrello was written by Paul Hensgen <phensgen@users.sourceforge.net> and
-many others.
-.br
-This manual page was prepared by Ben Burton <bab@debian.org>
-for the Debian GNU/Linux system (but may be used by others).
diff --git a/ubuntu/maverick/tdesdk/debian/man/xml2pot.1 b/ubuntu/maverick/tdesdk/debian/man/xml2pot.1
deleted file mode 100644
index 0b1a293d5..000000000
--- a/ubuntu/maverick/tdesdk/debian/man/xml2pot.1
+++ /dev/null
@@ -1,45 +0,0 @@
-.\" Hey, EMACS: -*- nroff -*-
-.\" First parameter, NAME, should be all caps
-.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
-.\" other parameters are allowed: see man(7), man(1)
-.TH XML2POT 1 "March 19, 2005"
-.\" Please adjust this date whenever revising the manpage.
-.\"
-.\" Some roff macros, for reference:
-.\" .nh disable hyphenation
-.\" .hy enable hyphenation
-.\" .ad l left justify
-.\" .ad b justify to both left and right margins
-.\" .nf disable filling
-.\" .fi enable filling
-.\" .br insert line break
-.\" .sp <n> insert n+1 empty lines
-.\" for manpage-specific macros, see man(7)
-.SH NAME
-xml2pot \- creates a PO-template file from a DocBook XML file
-.SH SYNOPSIS
-.B xml2pot
-.I original-XML
-.SH DESCRIPTION
-\fBxml2pot\fP is a command-line tool that produces a gettext message
-template file from the DocBook XML file \fIoriginal-XML\fP.
-The template file is sent to standard output.
-.PP
-The resulting template file can be used to create gettext message files
-(PO-files) for a variety of languages. These can then be used in conjunction
-with
-.BR po2xml (1)
-to translate the original XML file into these other languages.
-.PP
-This utility is part of the TDE Software Development Kit.
-.SH SEE ALSO
-.BR po2xml (1),
-.BR split2po (1),
-.BR swappo (1),
-.BR transxx (1).
-.SH AUTHOR
-The PO-XML tools were written by Stephan Kulow <coolo@kde.org> and
-Peter Wells <pete@yamuna.demon.co.uk>.
-.br
-This manual page was prepared by Ben Burton <bab@debian.org>
-for the Debian GNU/Linux system (but may be used by others).
diff --git a/ubuntu/maverick/tdesdk/debian/man/zonetab2pot.py.1 b/ubuntu/maverick/tdesdk/debian/man/zonetab2pot.py.1
deleted file mode 100644
index d6a4330ad..000000000
--- a/ubuntu/maverick/tdesdk/debian/man/zonetab2pot.py.1
+++ /dev/null
@@ -1,39 +0,0 @@
-.\" Hey, EMACS: -*- nroff -*-
-.\" First parameter, NAME, should be all caps
-.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
-.\" other parameters are allowed: see man(7), man(1)
-.TH ZONETAB2POT.PY 1 "November 14, 2002"
-.\" Please adjust this date whenever revising the manpage.
-.\"
-.\" Some roff macros, for reference:
-.\" .nh disable hyphenation
-.\" .hy enable hyphenation
-.\" .ad l left justify
-.\" .ad b justify to both left and right margins
-.\" .nf disable filling
-.\" .fi enable filling
-.\" .br insert line break
-.\" .sp <n> insert n+1 empty lines
-.\" for manpage-specific macros, see man(7)
-.SH NAME
-zonetab2pot.py \- converts a timezone list to a PO-file template
-.SH SYNOPSIS
-.B zonetab2pot.py
-[ \fItimezone-list\fP ]
-.SH DESCRIPTION
-\fBzonetab2pot.py\fP reads the timezone list given on the command-line
-and converts it to a gettext message file (PO-file) template containing
-the names of the individual timezones.
-.PP
-The given timezone list should be in the same format as the system
-\fIzone.tab\fP. If no timezone list is specified on the command-line,
-\fI/usr/share/zoneinfo/zone.tab\fP will be used.
-.PP
-The new PO-file template will be written to standard output.
-.PP
-This utility is part of the TDE Software Development Kit.
-.SH AUTHOR
-zonetab2pot.py was written by Lukas Tinkl <lukas@kde.org>.
-.br
-This manual page was prepared by Ben Burton <bab@debian.org>
-for the Debian GNU/Linux system (but may be used by others).