Rename KDEHOME and KDEDIR

24 files changed, 112 insertions, 112 deletions

diff --git a/doc/faq/configkde.docbook b/doc/faq/configkde.docbook
index f0cb4d2be..f1393d829 100644
--- a/doc/faq/configkde.docbook
+++ b/doc/faq/configkde.docbook
@@ -191,12 +191,12 @@ url="http://www.koffice.org/kword/euro.php">http://www.koffice.org/kword/euro.ph
 <answer><para>There are many ways to do that. If what you want to do
 is to run some scripts that would set some environment variables (for
 example, to start <command>gpg-agent</command>, <command>ssh-agent</command> and others), you can put
-these scripts into <filename class="directory">$<envar>KDEHOME</envar>/env/</filename> and make sure their names end in
-<literal role="extension">.sh</literal>. $<envar>KDEHOME</envar> is
+these scripts into <filename class="directory">$<envar>TDEHOME</envar>/env/</filename> and make sure their names end in
+<literal role="extension">.sh</literal>. $<envar>TDEHOME</envar> is
 usually a folder named <filename class="directory">.kde</filename>
 (note the period at the beginning) in your home
 folder. If you want scripts to be executed for all &kde; users, you can
-put them under <filename class="directory">$<envar>KDEDIR</envar>/env/</filename>, where $<envar>KDEDIR</envar> is the prefix &kde; was
+put them under <filename class="directory">$<envar>TDEDIR</envar>/env/</filename>, where $<envar>TDEDIR</envar> is the prefix &kde; was
 installed to (you can find this out using the command
 <userinput><command>kde-config</command> --prefix</userinput>).</para>
 <para>If you wish to start a program after &kde; has started, you may want to use the 
diff --git a/doc/faq/desktop.docbook b/doc/faq/desktop.docbook
index da3de1608..e31f7a8ce 100644
--- a/doc/faq/desktop.docbook
+++ b/doc/faq/desktop.docbook
@@ -45,7 +45,7 @@ use the &RMB; on the desktop and choose <menuchoice><guimenuitem>Create New</gui
 </question>
 <answer>
 <para>The icons can be found only in <filename
-class="directory">$<envar>KDEDIRS</envar>/share/icons</filename> or <filename
+class="directory">$<envar>TDEDIRS</envar>/share/icons</filename> or <filename
 class="directory">$<envar>HOME</envar>/.kde/share/icons</filename> or
 <filename class="directory">$<envar>HOME</envar>/.kde2/share/icons</filename>.  To use icons
 stored in other locations, you must either copy them into one of the
diff --git a/doc/faq/install.docbook b/doc/faq/install.docbook
index 8dc1227ea..5548d2f24 100644
--- a/doc/faq/install.docbook
+++ b/doc/faq/install.docbook
@@ -360,7 +360,7 @@ necessary on systems that do not support rpath; on &Linux; &ELF;, it
 should work without).  This environment variable may be called
 differently on some systems, &eg; it is called
 <envar>SHLIB_PATH</envar> on &IRIX;.  Then set the environment variable
-<envar>KDEDIR</envar> to the base of your &kde; tree, &eg; <filename
+<envar>TDEDIR</envar> to the base of your &kde; tree, &eg; <filename
 class="directory">/usr/local/kde</filename>.
 <caution>
 <para>Please bear in mind that it is unwise to set
@@ -378,7 +378,7 @@ features if you use the &kde; window manager and its helper
 programs.</para>
 <para>In order to make it easy for you, we have provided a simple
 script called <filename>starttde</filename> which gets installed in <filename
-class="directory">$<envar>KDEDIR</envar>/bin</filename> and is therefore in your
+class="directory">$<envar>TDEDIR</envar>/bin</filename> and is therefore in your
 path.</para>
 <para>Edit the file <filename>.xinitrc</filename> in your home folder (make a backup
 copy first!), remove everything that looks like calling a window
@@ -451,9 +451,9 @@ machine until the password is entered.</para></caution></para>
 <title>Setting the suid bit on the screensavers</title>
 <step performance="required"><para>become root</para></step>
 <step performance="required"><para><command>chown root
-$<envar>KDEDIR</envar>/bin/*.kss</command></para></step>
+$<envar>TDEDIR</envar>/bin/*.kss</command></para></step>
 <step performance="required"><para><command>chmod u+s
-$<envar>KDEDIR</envar>/bin/*.kss</command></para></step>
+$<envar>TDEDIR</envar>/bin/*.kss</command></para></step>
 </procedure>
 <para>Alternatively, if you compile &kde; from source, you can use
 <command>./configure <option>with-shadow</option></command> to
@@ -480,12 +480,12 @@ is better to leave it out.</para>
 
 <para>For csh or tcsh:</para>
 <programlisting>
-setenv KDEDIR /home/me
+setenv TDEDIR /home/me
 
 if ( $?LD_LIBRARY_PATH ) then
-   setenv LD_LIBRARY_PATH $KDEDIR/lib:$LD_LIBRARY_PATH
+   setenv LD_LIBRARY_PATH $TDEDIR/lib:$LD_LIBRARY_PATH
 else
-   setenv LD_LIBRARY_PATH $KDEDIR/lib
+   setenv LD_LIBRARY_PATH $TDEDIR/lib
 endif
 
 if ( ! $?LIBRARY_PATH ) then
@@ -494,11 +494,11 @@ endif
 </programlisting>
 <para>For <application>bash</application>:</para>
 <programlisting>
-KDEDIR=/home/me
-PATH=$KDEDIR/bin:$PATH
-LD_LIBRARY_PATH=$KDEDIR/lib:$LD_LIBRARY_PATH
+TDEDIR=/home/me
+PATH=$TDEDIR/bin:$PATH
+LD_LIBRARY_PATH=$TDEDIR/lib:$LD_LIBRARY_PATH
 LIBRARY_PATH=$LD_LIBRARY_PATH
-export KDEDIR PATH LD_LIBRARY_PATH LIBRARY_PATH
+export TDEDIR PATH LD_LIBRARY_PATH LIBRARY_PATH
 </programlisting></step>
 </procedure>
 <procedure><title><acronym>RPM</acronym> packages</title>
@@ -641,7 +641,7 @@ removing the old <filename class="directory">.kde</filename> folder,
  without a hitch.</para>
 <para>You can override the use of <filename
 class="directory">$<envar>HOME</envar>/.kde</filename> by setting the
-$<envar>KDEHOME</envar> variable.</para> 
+$<envar>TDEHOME</envar> variable.</para> 
 </answer>
 </qandaentry>
 
@@ -703,7 +703,7 @@ source?</para>
 uninstall</command> in the folder where you did <command>make
 install</command>.  If you have already deleted that folder,
 then there is only one way, and it is not good: go to <filename
-class="directory">$<envar>KDEDIR</envar>/bin</filename> and start deleting files
+class="directory">$<envar>TDEDIR</envar>/bin</filename> and start deleting files
 one by one.</para>
 <para>If you expect to find yourself in this situation, you might want to
 consider a program such as &GNU; <application>stow</application>, found at
diff --git a/doc/faq/kdeapps.docbook b/doc/faq/kdeapps.docbook
index ff11d80c2..68b1fd2cc 100644
--- a/doc/faq/kdeapps.docbook
+++ b/doc/faq/kdeapps.docbook
@@ -120,7 +120,7 @@ paste by clicking with the &MMB; (or both buttons if you are using a
 
 <para><application>FontConfig</application> must find the three fonts
 installed in: <filename
-class="directory">$<envar>KDEDIR</envar>/share/fonts</filename>. 
+class="directory">$<envar>TDEDIR</envar>/share/fonts</filename>. 
  If
 the &kde; install does not install these fonts in a directory that
 already exists (&eg; <filename
diff --git a/doc/faq/panel.docbook b/doc/faq/panel.docbook
index 5814dc613..6c9a1d3a2 100644
--- a/doc/faq/panel.docbook
+++ b/doc/faq/panel.docbook
@@ -40,7 +40,7 @@ you prefer from
 install it using the &kcontrolcenter;.</para>
 <para>In order to change only the &kmenu; icon you can overwrite the
 <filename>kmenu.png</filename> image for every size in an icon theme set.
-So, for &kde; default icons this would be <filename>$<envar>KDEDIR</envar>/share/icons/default.kde/<replaceable>size</replaceable>/apps/kmenu.png</filename>,
+So, for &kde; default icons this would be <filename>$<envar>TDEDIR</envar>/share/icons/default.kde/<replaceable>size</replaceable>/apps/kmenu.png</filename>,
 where <replaceable>size</replaceable> is one of the sizes included in the
 &kde; icon theme. 
 </para>
@@ -85,9 +85,9 @@ action="simul">&Alt;<keycap>F2</keycap> </keycombo> and entering
 
 <para>If the panel continues to disappear, you may wish to either
 remove or edit by hand your
-<filename>$<envar>KDEHOME</envar>/share/config/kickerrc</filename>
+<filename>$<envar>TDEHOME</envar>/share/config/kickerrc</filename>
 file, where <filename
-class="directory">$<envar>KDEHOME</envar></filename> is usually
+class="directory">$<envar>TDEHOME</envar></filename> is usually
 <filename class="directory">~/.kde</filename>. If you choose to edit
 it by hand, start by removing the applet entry groups.</para>
 
diff --git a/doc/faq/sound.docbook b/doc/faq/sound.docbook
index d7db604bc..af41375ab 100644
--- a/doc/faq/sound.docbook
+++ b/doc/faq/sound.docbook
@@ -44,7 +44,7 @@ conjunction with using <command>artsplay</command> in a second terminal can give
 <question><para>
 I've upgraded to the latest version of &kde; keeping my old configuration, and my system sounds don't work anymore!</para></question>
 <answer><para>
-Assuming you've installed &arts; correctly and you still have the codecs installed your previous &kde; installation needed, chances are this is a small problem with your <filename>knotifyrc</filename>. To confirm this, try creating an entirely new user and seeing if system notifications work under the new account. If they do, try moving your <filename>$<envar>KDEHOME</envar>/share/config/knotifyrc</filename> out of the way for your original user to see if this solves the problem.
+Assuming you've installed &arts; correctly and you still have the codecs installed your previous &kde; installation needed, chances are this is a small problem with your <filename>knotifyrc</filename>. To confirm this, try creating an entirely new user and seeing if system notifications work under the new account. If they do, try moving your <filename>$<envar>TDEHOME</envar>/share/config/knotifyrc</filename> out of the way for your original user to see if this solves the problem.
 </para></answer>
 </qandaentry>
 
diff --git a/doc/kate/highlighting.docbook b/doc/kate/highlighting.docbook
index 76952d26a..3a64d9d2c 100644
--- a/doc/kate/highlighting.docbook
+++ b/doc/kate/highlighting.docbook
@@ -212,7 +212,7 @@ the highlight detection rules.</para>
 <para>The formal definition, aka the <acronym>DTD</acronym> is stored
 in the file <filename>language.dtd</filename> which should be
 installed on your system in the folder
-<filename>$<envar>KDEDIR</envar>/share/apps/katepart/syntax</filename>.
+<filename>$<envar>TDEDIR</envar>/share/apps/katepart/syntax</filename>.
 </para>
 
 <variablelist>
diff --git a/doc/kcontrol/background/index.docbook b/doc/kcontrol/background/index.docbook
index 5241462c0..809350754 100644
--- a/doc/kcontrol/background/index.docbook
+++ b/doc/kcontrol/background/index.docbook
@@ -354,7 +354,7 @@ url="http://www.kde-look.org">KDE-Look</ulink> website.  You can of course
 select any image you have available to use as wallpaper, and it may be
 stored in any location on your hard drive.  To have a wallpaper show up in
 the list automatically for all users, you should save it to the <filename
-class="directory">$<envar>KDEDIR</envar>/share/wallpapers</filename>
+class="directory">$<envar>TDEDIR</envar>/share/wallpapers</filename>
 folder.</para>
 
 <para>A pattern is a picture file which &kde; uses as a template to
@@ -364,7 +364,7 @@ can add new patterns.</para>
 
 <para>To add a new pattern that is available to every user on your
 computer, simply place the file in <filename
-class="directory">$<envar>KDEDIR</envar>/share/apps/kdesktop/patterns/</filename>.</para>
+class="directory">$<envar>TDEDIR</envar>/share/apps/kdesktop/patterns/</filename>.</para>
 
 <para>Copy a <literal role="extension">.desktop</literal> file from
 this folder, and name it the same as your new pattern image file.
@@ -372,7 +372,7 @@ Modify the contents to suit your new pattern.</para>
 
 <para>To add a new pattern for a single user, add the files to
 <filename
-class="directory">$<envar>KDEHOME</envar>/share/apps/kdesktop/patterns/</filename>.</para>
+class="directory">$<envar>TDEHOME</envar>/share/apps/kdesktop/patterns/</filename>.</para>
 
 <para>For best results, the pattern should be a grayscale PNG file.</para>
 
diff --git a/doc/kcontrol/kdm/index.docbook b/doc/kcontrol/kdm/index.docbook
index 8f00db2f3..090b78225 100644
--- a/doc/kcontrol/kdm/index.docbook
+++ b/doc/kcontrol/kdm/index.docbook
@@ -87,7 +87,7 @@ dialog.</para>
 </itemizedlist>
 
 <para>If you do not specify a logo the default
-<filename>$<envar>KDEDIR</envar>/share/apps/kdm/pics/kdelogo.png</filename>
+<filename>$<envar>TDEDIR</envar>/share/apps/kdm/pics/kdelogo.png</filename>
 will be displayed.</para>
 
 <para>While &kde;'s style depends on the settings of the user logged in,
@@ -422,9 +422,9 @@ effect.</para></note>
 
 <para>Every user on the system can be represented by a image. The image
 for the user is kept in a file called
-<filename>$<envar>KDEDIR</envar>/share/apps/kdm/pics/users/$<envar>USER</envar>.xpm.</filename>
+<filename>$<envar>TDEDIR</envar>/share/apps/kdm/pics/users/$<envar>USER</envar>.xpm.</filename>
 If the user doesn't have such a file the file
-<filename>$<envar>KDEDIR</envar>/share/apps/kdm/pics/users/default.xpm</filename>
+<filename>$<envar>TDEDIR</envar>/share/apps/kdm/pics/users/default.xpm</filename>
 will be used instead.</para>
 
 <para>To assign a new image to a user just select the user in one of the
diff --git a/doc/kcontrol/proxy/index.docbook b/doc/kcontrol/proxy/index.docbook
index 0a47cec36..ca427e926 100644
--- a/doc/kcontrol/proxy/index.docbook
+++ b/doc/kcontrol/proxy/index.docbook
@@ -172,7 +172,7 @@ ask for a username or password if it needs to.</para>
 <para>The other option is <guilabel>Use automatic login</guilabel>.
 Select this option if you have already set up a login entry for your
 proxy server in the
-<filename>$<envar>KDEDIR</envar>/share/config/kionetrc</filename>
+<filename>$<envar>TDEDIR</envar>/share/config/kionetrc</filename>
 file.</para>
 
 </sect2>
diff --git a/doc/kcontrol/screensaver/index.docbook b/doc/kcontrol/screensaver/index.docbook
index 67cb99411..73ad996de 100644
--- a/doc/kcontrol/screensaver/index.docbook
+++ b/doc/kcontrol/screensaver/index.docbook
@@ -121,7 +121,7 @@ directions</para></caution>
 
 <screen>
 <prompt>bash$</prompt> <command>cd 
-$KDEDIR/share/applnk/System/ScreenSavers</command>
+$TDEDIR/share/applnk/System/ScreenSavers</command>
 <prompt>bash$</prompt> <command>ls</command>
 </screen> 
 
@@ -134,7 +134,7 @@ file to a name which does not end in
 <para>Example:</para>
 <screen>
 <prompt>bash$</prompt> <command>cd 
-$KDEDIR/share/applnk/System/ScreenSavers</command>
+$TDEDIR/share/applnk/System/ScreenSavers</command>
 <prompt>bash$</prompt> <command>mv KSpace.desktop KSpace.backup</command>
 </screen> 
 
@@ -148,7 +148,7 @@ original name:</para>
 
 <screen>
 <prompt>bash$</prompt> <command>cd 
-$KDEDIR/share/applnk/System/ScreenSavers</command>
+$TDEDIR/share/applnk/System/ScreenSavers</command>
 <prompt>bash$</prompt> <command>mv KSpace.backup KSpace.desktop</command>
 </screen> 
 
diff --git a/doc/kdm/index.docbook b/doc/kdm/index.docbook
index ee73b16a6..43cec1bde 100644
--- a/doc/kdm/index.docbook
+++ b/doc/kdm/index.docbook
@@ -297,7 +297,7 @@ main &kdm; dialog box. </para>
 system, and that you simply want to change its behavior in some way.</para>
 
 <para>When &kdm; starts up, it reads its configuration from the folder
-<filename class="directory">$KDEDIR/share/config/kdm/</filename> (this may
+<filename class="directory">$TDEDIR/share/config/kdm/</filename> (this may
 be <filename class="directory">/etc/trinity/kdm/</filename> or something else
 on your system).</para>
 
@@ -314,7 +314,7 @@ associated with any particular user. Therefore, it is not possible to have
 user-specific configuration files; all users share the common &kdmrc;.  It
 follows from this that the configuration of &kdm; can only be altered by
 those users that have write access to
-<filename>$<envar>KDEDIR</envar>/share/config/kdm/kdmrc</filename> (normally
+<filename>$<envar>TDEDIR</envar>/share/config/kdm/kdmrc</filename> (normally
 restricted to system administrators logged in as <systemitem
 class="username">root</systemitem>).</para>
 
@@ -414,7 +414,7 @@ dialog.</para>
 </itemizedlist>
 
 <para>If you do not specify a logo the default
-<filename>$<envar>KDEDIR</envar>/share/apps/kdm/pics/kdelogo.xpm</filename>
+<filename>$<envar>TDEDIR</envar>/share/apps/kdm/pics/kdelogo.xpm</filename>
 will be displayed.</para>
 
 <para>Normally the login box is centered on the screen.  Use the
@@ -870,13 +870,13 @@ libraries.</para>
 <para>For example:</para>
 
 <screen><command>export 
-<option>KDEDIR=<replaceable>/opt/kde</replaceable></option></command>
+<option>TDEDIR=<replaceable>/opt/kde</replaceable></option></command>
 <command>export 
 <option>QTDIR=<replaceable>/usr/lib/qt2</replaceable></option></command>
 <command>export 
-<option>PATH=<replaceable>$KDEDIR/bin:$QTDIR/bin:$PATH</replaceable></option></command>
+<option>PATH=<replaceable>$TDEDIR/bin:$QTDIR/bin:$PATH</replaceable></option></command>
 <command>export 
-<option>LD_LIBRARY_PATH=<replaceable>$KDEDIR/lib:$QTDIR/lib</replaceable></option></command>
+<option>LD_LIBRARY_PATH=<replaceable>$TDEDIR/lib:$QTDIR/lib</replaceable></option></command>
 </screen>
 
 <para>If you are still unsuccessful, try starting &xdm; instead, to
@@ -981,7 +981,7 @@ by &kdm;, you can quite simply add a new session.</para>
 
 <para>The sessions are defined in <firstterm>.desktop</firstterm> files in
 <filename
-class="directory">$<envar>KDEDIR</envar>/share/apps/kdm/sessions</filename>.
+class="directory">$<envar>TDEDIR</envar>/share/apps/kdm/sessions</filename>.
 You can simply add an appropriately named <literal
 role="extension">.desktop</literal> file in this directory. The fields
 are:</para>
diff --git a/doc/kicker/man-kicker.1.docbook b/doc/kicker/man-kicker.1.docbook
index 99f984670..448fe4202 100644
--- a/doc/kicker/man-kicker.1.docbook
+++ b/doc/kicker/man-kicker.1.docbook
@@ -42,7 +42,7 @@ starters, applets, and a clock.</para>
 
 <variablelist>
 <varlistentry>
-<term><filename>$<envar>KDEHOME</envar>/share/apps/kickerrc</filename></term>
+<term><filename>$<envar>TDEHOME</envar>/share/apps/kickerrc</filename></term>
 <listitem>
 <para>User specific configuration file.  This file is not normally intended
 to be edited directly; Most configuration items can be controlled from
diff --git a/doc/kioslave/thumbnail.docbook b/doc/kioslave/thumbnail.docbook
index 1dec888ed..62d5c3c4e 100644
--- a/doc/kioslave/thumbnail.docbook
+++ b/doc/kioslave/thumbnail.docbook
@@ -21,7 +21,7 @@ create file previews.</para>
 
 <para>See the documentation in the sources for more information.  You
 will find these at
-<filename>$<envar>KDEDIR</envar>/include/kio/thumbcreator.h</filename> or
+<filename>$<envar>TDEDIR</envar>/include/kio/thumbcreator.h</filename> or
 in the source folder <filename
 class="directory">tdebase/kioslave/thumbnail</filename></para>
 
diff --git a/doc/klipper/index.docbook b/doc/klipper/index.docbook
index 577b7f29e..b33ee6f15 100644
--- a/doc/klipper/index.docbook
+++ b/doc/klipper/index.docbook
@@ -472,7 +472,7 @@ small handle to the left of the &klipper; icon).</para>
 -->
 <!--
 <para>To disable this, simply remove the file 
-<filename>$<envar>KDEDIR</envar>/share/autostart/klipper.desktop</filename>
+<filename>$<envar>TDEDIR</envar>/share/autostart/klipper.desktop</filename>
 or create a file <filename>$<envar>HOME</envar>/share/autostart/klipper.desktop</filename>
 with the following contents:
 
diff --git a/doc/konqueror/browser.docbook b/doc/konqueror/browser.docbook
index 01ef1057b..b1cc0a0b2 100644
--- a/doc/konqueror/browser.docbook
+++ b/doc/konqueror/browser.docbook
@@ -446,7 +446,7 @@ just add a key line
 <screen><userinput>
 OverridenPorts=CommaSeparatedListOfAllowedPorts
 </userinput></screen>
-to <filename>$KDEDIR/share/config/kio_httprc
+to <filename>$TDEDIR/share/config/kio_httprc
 </filename> or 
 <filename>~/.kde/share/config/kio_httprc</filename>.</para>
 <para>For example
diff --git a/doc/konsole/index.docbook b/doc/konsole/index.docbook
index 22bb2fb0d..32a48af2b 100644
--- a/doc/konsole/index.docbook
+++ b/doc/konsole/index.docbook
@@ -941,11 +941,11 @@ combination of font, size and style.</para>
 <guimenuitem>Keyboard</guimenuitem></menuchoice></term>
 <listitem><para><action>Choose desired keymapping</action>.</para>
 <para>The list of these keymappings is taken from
-<filename>$KDEDIR/share/apps/konsole/*.keytab</filename>. The file
-<filename>$KDEDIR/share/apps/konsole/README.KeyTab</filename>
+<filename>$TDEDIR/share/apps/konsole/*.keytab</filename>. The file
+<filename>$TDEDIR/share/apps/konsole/README.KeyTab</filename>
 describes the <literal role="extension">*.keytab</literal> format in more detail. 
 Add to or modify these files to match your needs. The default keytab is taken from 
-<filename>$KDEDIR/share/apps/konsole/README.default.Keytab</filename>.</para>
+<filename>$TDEDIR/share/apps/konsole/README.default.Keytab</filename>.</para>
 </listitem>
 </varlistentry>
 
@@ -954,8 +954,8 @@ Add to or modify these files to match your needs. The default keytab is taken fr
 <guimenuitem>Schema</guimenuitem></menuchoice></term>
 <listitem><para><action>Set colors of text and background</action>.</para>
 <para>The list is taken from
-<filename>$KDEDIR/share/apps/konsole/*.schema</filename>. The file
-<filename>$KDEDIR/share/apps/konsole/README.Schema</filename>
+<filename>$TDEDIR/share/apps/konsole/*.schema</filename>. The file
+<filename>$TDEDIR/share/apps/konsole/README.Schema</filename>
 describes the <literal role="extension">*.schema</literal> format in more detail. 
 Add to or modify these files to match your needs.  You can also create custom 
 schemas through the preferences dialog at <menuchoice><guisubmenu>Settings</guisubmenu>
diff --git a/doc/kpager/index.docbook b/doc/kpager/index.docbook
index d2a2617dd..692c0558a 100644
--- a/doc/kpager/index.docbook
+++ b/doc/kpager/index.docbook
@@ -299,7 +299,7 @@ dialog</link></para>
 <para>Currently, you cannot turn that option off within the config dialog, but
 you can do it manually like this:</para>
 
-<para>Open the file <filename>$KDEHOME/share/config/kpagerrc</filename> with any
+<para>Open the file <filename>$TDEHOME/share/config/kpagerrc</filename> with any
 text editor like &kedit; or <application>vi</application>. If you have no
 rights to write that file, you may need to do it as root or contact your system
 administrator. In this file you will have to add a new key with the name
diff --git a/doc/ksplashml/index.docbook b/doc/ksplashml/index.docbook
index 57b39c2a9..247b7fd87 100644
--- a/doc/ksplashml/index.docbook
+++ b/doc/ksplashml/index.docbook
@@ -88,7 +88,7 @@ your tastes, you can learn how to customize the appearance of
 url="http://www.kde-look.org">KDE-Look</ulink>, extract them to
 <filename>~/.kde/share/apps/ksplash/Themes/</filename> for a single user, or
 to
-<filename>$<envar>KDEDIR</envar>/share/apps/ksplash/Themes/</filename>
+<filename>$<envar>TDEDIR</envar>/share/apps/ksplash/Themes/</filename>
 to make them available to all users of your system.</para>
 
 <para>You can also use the <guilabel>Splash Screen</guilabel> module under
diff --git a/doc/userguide/customizing-desktop.docbook b/doc/userguide/customizing-desktop.docbook
index 4d095cbdc..8089725d1 100644
--- a/doc/userguide/customizing-desktop.docbook
+++ b/doc/userguide/customizing-desktop.docbook
@@ -153,7 +153,7 @@ while this may be unnoticeable on very fast systems.</para>
 <para>To add an IceWM theme, select IceWM as the window decoration and click on
 the <guilabel>Open &kde;'s IceWM theme folder</guilabel> link in the window
 decoration description area. This will open a &konqueror; window
-to <filename>$<envar>KDEHOME</envar>/share/apps/twin/icewm-themes</filename>.
+to <filename>$<envar>TDEHOME</envar>/share/apps/twin/icewm-themes</filename>.
 Extract your IceWM theme to this folder. The theme will then be added to
 the list of IceWM themes. Select the theme you want to use and click on
 <guibutton>Apply</guibutton>.</para>
diff --git a/doc/userguide/index.docbook b/doc/userguide/index.docbook
index 66e312069..e9fb63f47 100644
--- a/doc/userguide/index.docbook
+++ b/doc/userguide/index.docbook
@@ -218,14 +218,14 @@ we're referring to:
 <term>&kde; prefix</term>
 <listitem><para>&kde; installs into its own folder tree, which you can find by
 running the command <userinput><command>kde-config</command> <option>--prefix</option></userinput>. This folder is referred to
-by the environment variables  $<envar>KDEDIRS</envar> and possibly
-$<envar>KDEDIR</envar>.</para>
+by the environment variables  $<envar>TDEDIRS</envar> and possibly
+$<envar>TDEDIR</envar>.</para>
 </listitem>
 </varlistentry>
 
 <varlistentry>
 <term>&kde; user-specific settings</term>
-<listitem><para>The environment variable $<envar>KDEHOME</envar>
+<listitem><para>The environment variable $<envar>TDEHOME</envar>
 points to the folder where &kde; should find user-specific settings.  If it is not
 set, the default value of <filename
 class="directory">~/.kde</filename> is used.</para>
diff --git a/doc/userguide/kde-for-admins.docbook b/doc/userguide/kde-for-admins.docbook
index 47195f284..12bdd50c5 100644
--- a/doc/userguide/kde-for-admins.docbook
+++ b/doc/userguide/kde-for-admins.docbook
@@ -142,7 +142,7 @@ Position=10,10
 <segtitle>Comment</segtitle>
 
 <seglistitem>
-<seg><envar>KDEHOME</envar></seg>
+<seg><envar>TDEHOME</envar></seg>
 <seg><filename class="directory">~/.kde</filename></seg>
 <seg></seg>
 </seglistitem>
@@ -151,12 +151,12 @@ Position=10,10
 <seg><envar>KDEROOTHOME</envar></seg>
 <seg><filename class="directory">/root/.kde</filename></seg>
 <seg>Different variable to prevent
-root writing to $KDEHOME of the user after running
+root writing to $TDEHOME of the user after running
 <command>su</command>.</seg>
 </seglistitem>
 
 <seglistitem>
-<seg><envar>KDEDIR</envar></seg>
+<seg><envar>TDEDIR</envar></seg>
 <seg><filename class="directory">/opt/trinity</filename>, <filename
 class="directory">/usr</filename>, <filename
 class="directory">/usr/trinity</filename></seg>
@@ -165,27 +165,27 @@ compiled-in default.</seg>
 </seglistitem>
 
 <seglistitem>
-<seg><envar>KDEDIRS</envar></seg>
+<seg><envar>TDEDIRS</envar></seg>
 <seg><filename class="directory">/opt/trinity</filename>, <filename
 class="directory">/usr</filename>, <filename
 class="directory">/usr/trinity</filename></seg>
 <seg>New in &kde;3. Can list multiple locations separated by a
-colon. If not set, falls back to $<envar>KDEDIR</envar></seg>
+colon. If not set, falls back to $<envar>TDEDIR</envar></seg>
 </seglistitem>
 
 </segmentedlist>
 </para>
 <para>Don't <emphasis>need</emphasis> to be set, defaults work just fine.</para>
-<para>Running &kde;2 next to &kde;3? Point $<envar>KDEDIR</envar> to
-&kde; 2 and $<envar>KDEDIRS</envar> to &kde; 3.</para>
+<para>Running &kde;2 next to &kde;3? Point $<envar>TDEDIR</envar> to
+&kde; 2 and $<envar>TDEDIRS</envar> to &kde; 3.</para>
 
 <informalexample>
 <para>A staff member at a university could have the following
 settings:</para>
 <programlisting>
-KDEHOME='~/.trinity'
+TDEHOME='~/.trinity'
 KDEROOTHOME='/root/.trinity'
-KDEDIRS='/opt/kde_staff:/opt/trinity'
+TDEDIRS='/opt/kde_staff:/opt/trinity'
 </programlisting>
 
 </informalexample>
@@ -251,7 +251,7 @@ bastian=staff
 Directories that are not relevant for a certain tree, or simply not used can
 be left out though. For example, directories used for temporary files are
 usually only found under <filename
-class="directory">$<envar>KDEHOME</envar></filename> but not in any other
+class="directory">$<envar>TDEHOME</envar></filename> but not in any other
 directory tree.</para>
 
 </sect1>
@@ -323,7 +323,7 @@ This file is read by all &kde; applications.</para></listitem>
 class="directory">share/config/session</filename></term>
 <listitem><para>This directory is used by session management and is
 normally only available under <filename
-class="directory">$<envar>KDEHOME</envar></filename>. At the end of a
+class="directory">$<envar>TDEHOME</envar></filename>. At the end of a
 session &kde; applications store their state here. The file names
 consist of the name of the application followed by a number. The
 session manager <command>ksmserver</command> stores references to
@@ -418,7 +418,7 @@ the following symlinks and directories will be created using the
 <variablelist>
 
 <varlistentry>
-<term><filename>$<envar>KDEHOME</envar>/socket-$<envar>HOSTNAME</envar></filename></term>
+<term><filename>$<envar>TDEHOME</envar>/socket-$<envar>HOSTNAME</envar></filename></term>
 <listitem><para>Usually <filename
 class="directory">/tmp/ksocket-$<envar>USER</envar>/</filename>, this
 is used for various &UNIX; sockets.</para>
@@ -426,14 +426,14 @@ is used for various &UNIX; sockets.</para>
 </varlistentry>
 
 <varlistentry>
-<term><filename>$<envar>KDEHOME</envar>/tmp-$<envar>HOSTNAME</envar></filename></term>
+<term><filename>$<envar>TDEHOME</envar>/tmp-$<envar>HOSTNAME</envar></filename></term>
 <listitem><para>Usually	<filename
 class="directory">/tmp/kde-$<envar>USER</envar>/</filename>, this is used for temporary files.</para>
 </listitem>
 </varlistentry>
 
 <varlistentry>
-<term><filename>$<envar>KDEHOME</envar>/cache-$<envar>HOSTNAME</envar></filename></term>
+<term><filename>$<envar>TDEHOME</envar>/cache-$<envar>HOSTNAME</envar></filename></term>
 <listitem><para>Usually <filename
 class="directory">/var/tmp/kdecache-$<envar>USER</envar>/</filename>,
 this is used for cached files.</para>
@@ -538,7 +538,7 @@ configuration files is combined on a key-by-key basis.  If the same key
 within a certain group is defined in more than one place, the key value read
 from the directory tree with the highest precedence will be used.
 Configuration files under <filename
-class="directory">$<envar>KDEHOME</envar></filename> always have the highest
+class="directory">$<envar>TDEHOME</envar></filename> always have the highest
 precedence.  If a key in a certain group is defined multiple times in a
 single file, the value of the last entry is used.</para>
 
@@ -741,7 +741,7 @@ Caption[fr]=Ma L&eacute;gende
 <para>In general the entries that can appear in a configuration file are not
 documented.  With &kde; 3.2 a start has been made to change this. In
 <filename
-class="directory">$<envar>KDEDIR</envar>/share/config.kcfg</filename>, files
+class="directory">$<envar>TDEDIR</envar>/share/config.kcfg</filename>, files
 can be found that provide a formal description of the possible entries in a
 configuration file. These are used by the new &kde; Configuration Editor
 when available.</para>
@@ -785,7 +785,7 @@ Auto Save Interval=25
 <title>&kdm;</title>
 
 <para>Always runs as <systemitem class="username">root</systemitem>! Uses
-<filename>$<envar>KDEDIR</envar>/share/config/kdmrc</filename> and
+<filename>$<envar>TDEDIR</envar>/share/config/kdmrc</filename> and
 <filename>/etc/X11/xdm/Xservers</filename>. The latter contains entries
 like:</para>
 
@@ -918,7 +918,7 @@ as well as <command>tdeinit</command> loadable modules
 (<acronym>KLM</acronym>s).  <acronym>KLM</acronym>s work just like binary
 program files but can be started more efficiently.  <acronym>KLM</acronym>s
 live in <filename
-class="directory">$<envar>KDEDIR</envar>/lib/trinity</filename></para>
+class="directory">$<envar>TDEDIR</envar>/lib/trinity</filename></para>
 
 <para>The drawback is that programs started this way appear as
 <computeroutput><command>tdeinit</command></computeroutput> in the output of
@@ -1031,7 +1031,7 @@ that <command>klauncher</command> crashed.</para>
 <para><command>klauncher</command> can be restarted by restarting
 <command>tdeinit</command> from a console window. Make sure that
 $<envar>HOME</envar>, $<envar>DISPLAY</envar> and the various
-$<envar>KDEDIR(S)</envar> are set correctly when doing so!</para>
+$<envar>TDEDIR(S)</envar> are set correctly when doing so!</para>
 
 </sect2>
 
@@ -1055,7 +1055,7 @@ the session manager launches auto-start applications and restores
 applications from the previous session.  The applications to auto-start are
 indicated by <literal role="extension">.desktop</literal> files in the
 <filename
-class="directory">$<envar>KDEDIR</envar>/share/autostart</filename>
+class="directory">$<envar>TDEDIR</envar>/share/autostart</filename>
 directory.  Whether or not to auto-start an application can be made
 conditional upon some configuration entry determined by the
 <varname>X-KDE-autostart-condition</varname> entry in the <literal
@@ -1122,7 +1122,7 @@ are:</para>
 
 <para><command>kdesktop</command> in its turn automatically starts
 applications stored in <filename
-class="directory">$<envar>KDEHOME</envar>/Autostart</filename>. <command>kdesktop</command>
+class="directory">$<envar>TDEHOME</envar>/Autostart</filename>. <command>kdesktop</command>
 will automatically open any files stored in this directory including
 documents, binary files or applications in the form of <literal
 role="extension">.desktop</literal> files.</para>
@@ -1134,7 +1134,7 @@ at the time the session was saved.  Sessions are stored in the
 <filename>ksmserverrc</filename> configuration file which contains
 references to application-specific state information. The
 application-specific state information is saved in <filename
-class="directory">$<envar>KDEHOME</envar>/share/config/session</filename>.
+class="directory">$<envar>TDEHOME</envar>/share/config/session</filename>.
 The state information of &twin; contains the location of the application
 windows of all the other applications in the session.
 </para>
@@ -1149,23 +1149,23 @@ windows of all the other applications in the session.
 <variablelist>
 
 <varlistentry>
-<term>$<envar>KDEDIR</envar></term>
+<term>$<envar>TDEDIR</envar></term>
 <listitem><para>Has to be set if
-<envar>KDEDIRS</envar> is not set and has to point to the root of the
+<envar>TDEDIRS</envar> is not set and has to point to the root of the
 &kde; installation tree. Allows &kde; to find its data like icons,
 menus and libraries.</para>
 </listitem>
 </varlistentry>
 
-<varlistentry><term>$<envar>KDEDIRS</envar></term>
-<listitem><para>Overrides <envar>KDEDIR</envar> and allows you to specify
+<varlistentry><term>$<envar>TDEDIRS</envar></term>
+<listitem><para>Overrides <envar>TDEDIR</envar> and allows you to specify
 multiple directories where &kde; searches for its data. Useful if you want
 or have to install some programs to a different prefix than the rest of
 &kde;.</para> 
 </listitem>
 </varlistentry>
 
-<varlistentry><term><envar>$KDEHOME</envar></term><listitem><para>If
+<varlistentry><term><envar>$TDEHOME</envar></term><listitem><para>If
 not set, &kde; uses <filename class="directory">~/.kde</filename> as
 the directory where personal data is stored.</para>
 </listitem>
@@ -1282,7 +1282,7 @@ class="directory">$<envar>XDG_DATA_HOME</envar></filename> base
 directory. Default is
 <literal>/usr/local/share/:/usr/share/</literal></para>
 
-<para>&kde; adds locations from $<envar>KDEDIRS</envar> and profiles
+<para>&kde; adds locations from $<envar>TDEDIRS</envar> and profiles
 as well.  Used for <literal role="extension">.desktop</literal> and
 <literal role="extension">.directory</literal> menu files. <literal
 role="extension">.desktop</literal> files under <filename
@@ -1305,7 +1305,7 @@ specific configuration files should be stored. Default is
 (&kde; 3.2) - Defines the preference-ordered set of base directories
 to search for configuration files in addition to the $<envar>XDG_CONFIG_HOME</envar>
 base directory. The default is <filename class="directory">/etc/xdg</filename> &kde; adds locations from
-$<envar>KDEDIRS</envar> and profiles as well. Used by <literal role="extension">.menu</literal> descriptions in
+$<envar>TDEDIRS</envar> and profiles as well. Used by <literal role="extension">.menu</literal> descriptions in
 <filename class="directory">$<envar>XDG_CONFIG_DIRS</envar>/menus</filename>.
 </para>
 </listitem>
@@ -1325,7 +1325,7 @@ as well as <command>tdeinit</command> loadable modules
 (<acronym>KLM</acronym>s).  <acronym>KLM</acronym>s work just like binary
 program files but can be started more efficiently.  <acronym>KLM</acronym>s
 live in <filename
-class="directory">$<envar>KDEDIR</envar>/lib/trinity</filename></para>
+class="directory">$<envar>TDEDIR</envar>/lib/trinity</filename></para>
 
 <para>The drawback is that programs started this way appear as
 <computeroutput><command>tdeinit</command></computeroutput> in the
@@ -1615,11 +1615,11 @@ copied from <filename
 class="directory">/etc/skel/Desktop</filename></para></listitem>
 
 <listitem><para><filename
-class="directory">$<envar>KDEDIR</envar>/apps/kdesktop/Desktop</filename>
+class="directory">$<envar>TDEDIR</envar>/apps/kdesktop/Desktop</filename>
 (merged)</para></listitem>
 
 <listitem><para><filename
-class="directory">$<envar>KDEDIR</envar>/apps/kdesktop/DesktopLinks</filename>
+class="directory">$<envar>TDEDIR</envar>/apps/kdesktop/DesktopLinks</filename>
 (copied)</para></listitem>
 
 <listitem><para>Device Icons (dynamically
@@ -1704,7 +1704,7 @@ Reader.desktop</filename></para></listitem>
 
 <para><literal role="extension">.menu</literal> files describing the
 menu structure. The files are stored in <filename
-class="directory">$<envar>KDEDIR</envar>/etc/xdg/menus</filename> and
+class="directory">$<envar>TDEDIR</envar>/etc/xdg/menus</filename> and
 <filename class="directory">/etc/xdg/menus</filename>. These store the
 system-wide menu structure and are controlled by
 $<envar>XDG_CONFIG_DIRS</envar>. <filename
@@ -1715,7 +1715,7 @@ url="http://www.freedesktop.org/Standards/basedir-spec">http://www.freedesktop.o
 
 <para><literal role="extension">.desktop</literal> files describe the
 applications and are stored in: <filename
-class="directory">$<envar>KDEDIR</envar>/share/applications</filename>,
+class="directory">$<envar>TDEDIR</envar>/share/applications</filename>,
 <filename class="directory">/usr/share/applications</filename>,
 <filename
 class="directory">/usr/local/share/applications</filename>. These are
@@ -1733,7 +1733,7 @@ url="http://www.freedesktop.org/Standards/basedir-spec">http://www.freedesktop.o
 
 <para><literal role="extension">.directory</literal> files describing
 the sub-menus are stored in: <filename
-class="directory">$<envar>KDEDIR</envar>/share/desktop-directories</filename>,
+class="directory">$<envar>TDEDIR</envar>/share/desktop-directories</filename>,
 <filename class="directory">/usr/share/desktop-directories</filename>, <filename
 class="directory">/usr/local/share/desktop-directories</filename>.
 These are the system-wide menu <literal
@@ -1795,7 +1795,7 @@ role="extension">.directory</literal> file</para>
 <title>Essential Menus</title>
 
 <para><filename
-class="directory">$<envar>KDEDIR</envar>/etc/xdg/menus/applications-merged/</filename>
+class="directory">$<envar>TDEDIR</envar>/etc/xdg/menus/applications-merged/</filename>
 contains <filename>kde-essential.menu</filename> which includes some
 essential menus that are normally not shown in the &kde; menu itself:
 <itemizedlist>
@@ -1813,7 +1813,7 @@ whose contents are defined by
 <filename>kde-screensavers.menu</filename> and whose icon and  name
 are defined by
 <filename>kde-system-screensavers.directory</filename>.
-<filename>$<envar>KDEDIR</envar>/share/desktop-directories/kde-system-screensavers.directory</filename>
+<filename>$<envar>TDEDIR</envar>/share/desktop-directories/kde-system-screensavers.directory</filename>
 contains:
 <programlisting>
 NoDisplay=true
@@ -1828,7 +1828,7 @@ NoDisplay=true
 
 <para>&kde; continues to support old-style menus that are defined by
 the directory structures in <filename
-class="directory">$<envar>KDEDIR</envar>/share/applnk</filename>
+class="directory">$<envar>TDEDIR</envar>/share/applnk</filename>
 (system wide) and <filename
 class="directory">$<envar>HOME</envar>/.kde/share/applnk</filename>
 (user specific). This is observed unless the <literal role="extension">.desktop</literal> file has a  <varname>Categories</varname>= line. In that case the categories determine the location in the menu.</para>
@@ -1854,7 +1854,7 @@ CheckSycoca=false
 </programlisting>
 </para>
 
-<para>To force regeneration, run <userinput><command>touch $<envar>KDEDIR</envar>/share/services/update_ksycoca</command></userinput>.</para>
+<para>To force regeneration, run <userinput><command>touch $<envar>TDEDIR</envar>/share/services/update_ksycoca</command></userinput>.</para>
 
 </sect2>
 
@@ -1918,7 +1918,7 @@ and the following special buttons:
 <para>File associations associate a file type with an application or
 applications. The type of a file is established by determining its
 &MIME; type. &MIME; types known by &kde; are stored in <filename
-class="directory">$<envar>KDEDIR</envar>/share/mimelnk</filename> and
+class="directory">$<envar>TDEDIR</envar>/share/mimelnk</filename> and
 each application's <literal role="extension">.desktop</literal> file
 contains a list of &MIME; types supported by that application.</para>
 
@@ -2046,7 +2046,7 @@ shell_access=false</screen>
 <para>Since this affects the &kde; menu and the available applications, we
 must force an update of the sycoca database:</para>
 
-<screen><userinput><command>touch</command> <filename>$<envar>KDEDIR</envar>/share/services/update_ksycoca</filename></userinput></screen>
+<screen><userinput><command>touch</command> <filename>$<envar>TDEDIR</envar>/share/services/update_ksycoca</filename></userinput></screen>
 
 <para>Now re-login to &kde; and check the following points:</para>
 
@@ -2263,12 +2263,12 @@ ftp</para></listitem>
 <para>Information about protocols is stored in <literal
 role="extension">*.protocol</literal> files stored in
 <filename
-class="directory">$<envar>KDEDIR</envar>/share/services</filename>.</para>
+class="directory">$<envar>TDEDIR</envar>/share/services</filename>.</para>
 
 <para>The <option>Class</option>= entry defines the group a protocol is part
 of:
 <userinput><command>grep</command> <option>Class=</option>
-<filename>$<envar>KDEDIR</envar>/share/services/*.protocol</filename></userinput></para>
+<filename>$<envar>TDEDIR</envar>/share/services/*.protocol</filename></userinput></para>
 
 <para>General rules:</para>
 
@@ -2317,7 +2317,7 @@ menu.</para>
 <listitem>
 <para>The modules that are visible in the Control Center normally
 have a <literal role="extension">.desktop</literal> file in <filename
-class="directory">$<envar>KDEDIR</envar>/share/applications/kde</filename>
+class="directory">$<envar>TDEDIR</envar>/share/applications/kde</filename>
 and are sorted under the hidden <guimenu>Settings-Modules</guimenu> menu by
 the <filename>kde-settings.menu</filename>, included from 
 <filename>kde-essential.menu</filename></para>
@@ -2325,7 +2325,7 @@ the <filename>kde-settings.menu</filename>, included from
 </listitem>
 <listitem>
 <para>Application specific modules normally have a <literal role="extension">.desktop</literal> file under
-<filename>$<envar>KDEDIR</envar>/share/applnk/.hidden</filename> which
+<filename>$<envar>TDEDIR</envar>/share/applnk/.hidden</filename> which
 corresponds to the hidden .hidden menu, included as a result of
 <markup>&lt;KDELegacyDirs/&gt;</markup></para>
 <screen><userinput><command>kbuildsycoca</command> <option>--menutest</option> 2&gt; /dev/null | <command>grep</command> .hidden</userinput></screen>
@@ -2356,7 +2356,7 @@ there.</para>
 <title>Making it Work</title>
 
 Making It Work
-KDE 3.2: Set $KDEDIRS from starttde script
+KDE 3.2: Set $TDEDIRS from starttde script
 Distribute profiles to all clients
 
 </para>
@@ -2604,7 +2604,7 @@ of &UNIX; shell scripting with the ease of use of &kde;.</para>
 <screen><userinput><command>kdialog</command> <option>--title 'New Mail'</option> <option>--msgbox 'You have new mail!'</option> <option>--dontagain myfile:mykey</option></userinput></screen>
 
 <para>Saves whether to show again in
-<filename>$<envar>KDEHOME</envar>/share/config/myfile</filename> (by writing
+<filename>$<envar>TDEHOME</envar>/share/config/myfile</filename> (by writing
 into this file the following lines:</para>
 
 <screen>[Notification Messages]
diff --git a/doc/userguide/under-the-hood.docbook b/doc/userguide/under-the-hood.docbook
index 13cd52877..9b08bf449 100644
--- a/doc/userguide/under-the-hood.docbook
+++ b/doc/userguide/under-the-hood.docbook
@@ -42,7 +42,7 @@ LastFile=/var/tmp/test.txt</programlisting>
 
 <para>The user-specific configuration files are stored in <filename
 class="directory">.kde/share/config</filename> (replace 
-<filename>.kde</filename> with your $<envar>KDEHOME</envar> setting) and
+<filename>.kde</filename> with your $<envar>TDEHOME</envar> setting) and
 the global ones are in the <filename
 class="directory">share/config</filename> sub-directory of &kde;'s
 installation path. (You can find this path by running the command
@@ -64,7 +64,7 @@ crash.</para></warning>
 <para>So the first rule is to make a backup of your file before modifying
 it. The backup is better stored outside any
 <filename class="directory">.kde</filename> subdirectory 
-(or the corresponding $<envar>KDEHOME</envar> directory). Backups are anyway
+(or the corresponding $<envar>TDEHOME</envar> directory). Backups are anyway
 a good idea in case of a major failure of &kde; that would
 destroy important configuration files (for example your &kmail;  settings,
 which are in in the file <filename>kmailrc</filename>).
diff --git a/doc/userguide/your-kde-account.docbook b/doc/userguide/your-kde-account.docbook
index aa37dddac..2864eb4ba 100644
--- a/doc/userguide/your-kde-account.docbook
+++ b/doc/userguide/your-kde-account.docbook
@@ -29,21 +29,21 @@ applications which should start each time you start &kde;; and
 <filename>.kde/share/apps/kabc</filename>, where your address book is
 stored.</para>
 </listitem>
-<!-- FIXME: Apparently KDEDIR and KDEDIRS are deprecated. I need to -->
+<!-- FIXME: Apparently TDEDIR and TDEDIRS are deprecated. I need to -->
 <!-- get the truth on this -->
-<listitem><para>The environment variables <envar>KDEDIR</envar> and
-<envar>KDEDIRS</envar> tell &kde; where its files are stored. You will
-usually only need to set <envar>KDEDIR</envar> to the directory in which
+<listitem><para>The environment variables <envar>TDEDIR</envar> and
+<envar>TDEDIRS</envar> tell &kde; where its files are stored. You will
+usually only need to set <envar>TDEDIR</envar> to the directory in which
 &kde; is installed, but sometimes you might have other &kde;
 programs installed elsewhere: in this case, you can use the
-<envar>KDEDIRS</envar> environment variable. Set
-<envar>KDEDIRS</envar> to a list of all the directories containing
+<envar>TDEDIRS</envar> environment variable. Set
+<envar>TDEDIRS</envar> to a list of all the directories containing
 &kde; programs, separated by commas. For example, if you have &kde;
 programs in both <filename>/usr/local/kde</filename> and
 <filename>/home/phil/kde</filename>, you can use <userinput>export
-KDEDIR=/usr/local/kde,/home/phil/kde</userinput> if you use
+TDEDIR=/usr/local/kde,/home/phil/kde</userinput> if you use
 <application>bash</application> or <userinput>setenv
-KDEDIR=/usr/local/kde,/home/phil/kde</userinput> if you use sh.
+TDEDIR=/usr/local/kde,/home/phil/kde</userinput> if you use sh.
 </para>
 </listitem>
 </itemizedlist>