#!/bin/sh # # A script to perform R14.0.0 XDG compliance updates. # This script should be needed to run only once. SCRIPT_NAME="`basename \`readlink -f $0\``" # TODO: Do we need to trap whether the user is running this script while # in a Trinity session? Most files can be updated "live" but some can't, # such as kdeglobals. # Allow forced execution of this script regardless of the kdeglobals setting. if [ "$1" = "force" ]; then FORCE="true" fi # TODO: As the user should not be logged into a Trinity session when running # this script, or an administrator might run this script remotely, the # $TDEHOME variable probably is not set or knowable from within this script. # We presume $HOME/.trinity, but should provide a way to pass a command line # parameter to change that location. PROFILE_DIR="$HOME/.trinity" CACHE_DIR="$PROFILE_DIR/cache-`uname -n`" # TODO: How to handle environments where files/directories are locked # administratively and can't be updated. The nominal validation checks # in this script provide some notice but no direct remedy. # The binaries for TDE are located in the same place as this script. # To determine that location use the following method rather than presuming # the existence of $TDEDIR. That environment variable might not be # defined or defined to point to KDE4 binaries. BIN_DIR="`dirname \`readlink -f $0\``" if [ -x $BIN_DIR/tde-config ]; then TDEDIR=${BIN_DIR%/bin} else echo "[r14-xdg-update] Unable to determine TDE base directory." echo "[r14-xdg-update] This script should be installed in the same directory." echo "[r14-xdg-update] Exiting." exit 1 fi unset BIN_DIR unset KDEGLOBALS_KEY_VALUE Wait_For_Response () { unset response # -r Backslash does not act as an escape character. # -p Display "PROMPT" without a trailing newline, before attempting to read any input. while true; do read -r -p "$1 (y/n): " yn case $yn in [Yy]* ) response=y; break;; [Nn]* ) response=n; break;; * ) echo "Please answer yes (y/Y) or no (n/N).";; esac done } Proceed_From_Response () { if [ "$response" = "n" -o "$response" = "N" ]; then echo "Exiting." echo exit 0 else echo "Continuing." echo fi } Display_Message () { if [ "$DISPLAY" != "" ]; then echo -e "$MESSAGE" | xmessage -center -file - > /dev/null 2>/dev/null else echo -e "$MESSAGE" fi } Message_Prefix () { if [ "$DISPLAY" != "" ]; then echo -n "[r14-xdg-update] " fi } Validation_Failure () { Display_Message "$MESSAGE" if [ "$KDEGLOBALS_KEY_VALUE" = "" ]; then KDEGLOBALS_KEY_VALUE="$TEST_NUM" else KDEGLOBALS_KEY_VALUE="$KDEGLOBALS_KEY_VALUE;$TEST_NUM" fi } # Do not update when $TDEHOME is a sym link to another profile directory. Trinity should have # full reign within its own profile directory (limited to administrative locking), but the error # check is a conservative approach. TDEHOME_LINK="`readlink \"$PROFILE_DIR\"`" if [ "$TDEHOME_LINK" != "" ]; then # Force this entry to ensure the updates eventually are performed should the user copy the # original kdeglobals file into a new Trinity profile. $TDEDIR/bin/kwriteconfig --file kdeglobals --group "R14 XDG Updates" --key Updated --type bool 'false' # Are we in X? Display an X dialog explaining breakage. if [ "$DISPLAY" != "" ]; then echo "[r14-xdg-update] Warning! The profile directory $PROFILE_DIR is a" 1>&2 echo " sym link to $TDEHOME_LINK!" 1>&2 echo " R14 updates will not be performed because Trinity needs its own separate profile directory." 1>&2 echo " Without R14 updates some Trinity apps will fail to function correctly." 1>&2 fi MESSAGE="Oops! The profile directory $PROFILE_DIR is a sym link to $TDEHOME_LINK.\n\nTrinity R14 XDG compliance updates will not be performed because\nTrinity needs its own separate profile directory.\n\nWithout R14 XDG compliance updates, some Trinity apps will fail to\nfunction properly.\n\nFailures include the following:\n\n* Many left-side icon lists will not populate,\n such as the Panel and Konqueror configuration dialogs.\n\n* User-defined keyboard shortcuts fail (khotkeysrc).\n System defined shortcuts remain functional.\n\n* User-defined app preferences fail (profilerc).\n\n* Konqueror navigation/sidebar panel won't open.\n\n* User-defined konqueror service menus, kicker customization,\n konqueror sidebar, Recent Documents list fail.\n\nPossible remedies:\n\n* If necessary contact your system administrator.\n\n* Break the sym link to allow Trinity to create a fresh Trinity profile.\n\n* Use the migratekde3 script to migrate a KDE3 profile to Trinity." # Are we in X? Display an X dialog explaining breakage. if [ "$DISPLAY" != "" ]; then echo -e "$MESSAGE" | xmessage -center -file - -buttons Continue,Quit > /dev/null 2>/dev/null if [ "$?" = "102" ]; then # User select the Quit button: quit this script. unset PROFILE_DIR unset TDEHOME_LINK exit 1 fi else echo echo -e "$MESSAGE" echo Wait_For_Response "Break the sym link now and migrate the $TDEHOME_LINK profile to a new Trinity profile?" Proceed_From_Response unlink "$HOME/.trinity" 2>/dev/null if [ "`readlink \"$HOME/.trinity\"`" != "" ]; then echo "Unable to break the sym link. Check your file and directory privileges. Quitting." unset PROFILE_DIR unset TDEHOME_LINK exit 1 else sh $TDEDIR/bin/migratekde3 echo fi fi fi R14_UPDATED="`$TDEDIR/bin/kreadconfig --file kdeglobals --group "R14 XDG Updates" --key Updated`" if [ "$R14_UPDATED" != "true" ] || [ "$FORCE" = "true" ]; then if [ "$R14_UPDATED" != "true" ] && [ "$R14_UPDATED" != "false" ] && [ "$R14_UPDATED" != "" ]; then Message_Prefix echo "The r14-xdg-update script has been run at least once." Message_Prefix echo "The error code is $R14_UPDATED." MESSAGE="The r14-xdg-update script has been run at least once.\n\nThe script is not successfully updating.\n\nThe script will run with each login until corrected.\n\nPlease contact an administrator or take appropriate\nadmininstrative action to correct the problem.\n\nThe error code is $R14_UPDATED." # Are we in X? Display an X dialog explaining breakage. if [ "$DISPLAY" != "" ]; then echo -e "$MESSAGE" | xmessage -center -file - -buttons Continue,Quit > /dev/null 2>/dev/null if [ "$?" = "102" ]; then # User select the Quit button: quit this script. unset PROFILE_DIR unset R14_UPDATED unset TDEHOME_LINK exit 1 fi fi fi Message_Prefix echo "Performing a profile update for Trinity release R14 XDG compliance." Message_Prefix echo "Updating *.desktop files." find "$PROFILE_DIR" -name "*.desktop" -exec sed -i 's|X-KDE-|X-TDE-|g' {} \; 2>/dev/null find "$PROFILE_DIR" -name "*.desktop" -exec sed -i 's|KDE\;|TDE\;|g' {} \; 2>/dev/null find "$HOME/.local" -name "*.desktop" -exec sed -i 's|X-KDE-|X-TDE-|g' {} \; 2>/dev/null find "$HOME/.local" -name "*.desktop" -exec sed -i 's|KDE\;|TDE\;|g' {} \; 2>/dev/null Message_Prefix echo "Updating references of $TDEDIR/share/applications/kde to share/applications/tde." # Exclude KMail mail files --- we don't want to touch those files. find "$PROFILE_DIR" -path "$PROFILE_DIR/share/apps/kmail/mail" -prune -o -type f -exec sed -i "s|$TDEDIR/share/applications/kde|$TDEDIR/share/applications/tde|g" {} \; 2>/dev/null # Preserve keyboard shortcuts and input actions. Message_Prefix echo "Updating user-defined keyboard shortcuts in khotkeysrc." sed -i 's|CommandURL=kde-|CommandURL=tde-|g' "$PROFILE_DIR/share/config/khotkeysrc" 2>/dev/null sed -i 's|K Menu - kde-|TDE Menu - tde-|g' "$PROFILE_DIR/share/config/khotkeysrc" 2>/dev/null sed -i 's|Name=K Menu|Name=TDE Menu|g' "$PROFILE_DIR/share/config/khotkeysrc" 2>/dev/null sed -i 's|in KDE stands|in TDE stands|g' "$PROFILE_DIR/share/config/khotkeysrc" 2>/dev/null sed -i 's| use KDE| use TDE|g' "$PROFILE_DIR/share/config/khotkeysrc" 2>/dev/null Message_Prefix echo "Updating some text strings in khotkeysrc." sed -i 's|Go to KDE Website|Go to TDE Website|g' "$PROFILE_DIR/share/config/khotkeysrc" 2>/dev/null sed -i 's|www\.kde\.org|www\.trinitydesktop\.org|g' "$PROFILE_DIR/share/config/khotkeysrc" 2>/dev/null sed -i 's|KDE3\.1|TDE|g' "$PROFILE_DIR/share/config/khotkeysrc" 2>/dev/null sed -i 's|kde32b1|trinity2b1|g' "$PROFILE_DIR/share/config/khotkeysrc" 2>/dev/null sed -i 's|kde321|trinity21|g' "$PROFILE_DIR/share/config/khotkeysrc" 2>/dev/null # Fix the some of the same text strings in kglobalshortcutsrc. Message_Prefix echo "Updating some text strings in kglobalshortcutsrc." sed -i 's|Go to KDE Website|Go to TDE Website|g' "$PROFILE_DIR/share/config/kglobalshortcutsrc" 2>/dev/null sed -i 's|www\.kde\.org|www\.trinitydesktop\.org|g' "$PROFILE_DIR/share/config/kglobalshortcutsrc" 2>/dev/null sed -i 's|KDE3\.1|TDE|g' "$PROFILE_DIR/share/config/kglobalshortcutsrc" 2>/dev/null # Preserve app preferences. Message_Prefix echo "Updating user-defined app preferences in profilerc." sed -i 's|Application=kde-|Application=tde-|g' "$PROFILE_DIR/share/config/profilerc" 2>/dev/null # Preserve kicker/panel icons. Message_Prefix echo "Updating kicker/panel customizations in kickerrc." sed -i 's|StorageId\[\$e\]=kde-|StorageId\[\$e\]=tde-|g' "$PROFILE_DIR/share/config/kickerrc" 2>/dev/null # Preserve Quick Launch icons. # There should only be one configuration file, but old KDE3 remnant files might exist ofr users who # migrated from KDE3. We don't care about those files, but we still need to update the correct configuration file. QUICK_LAUNCH_CONFIG="`grep launcher_panelapplet $PROFILE_DIR/share/config/kickerrc | awk -F = '{print $2}'`" if [ "$QUICK_LAUNCH_CONFIG" != "" ]; then Message_Prefix echo "Updating Quick Launch applet." sed -i 's|,kde-|,tde-|g' "$PROFILE_DIR/share/config/$QUICK_LAUNCH_CONFIG" 2>/dev/null fi # Update sym link files in $HOME/.trinity/Autostart. ( cd "$PROFILE_DIR/Autostart" Message_Prefix echo "Updating Autostart files." for i in `find . -type l`; do LINK="`readlink $i`" LINK_PATH="`dirname $LINK`" LINK_NAME="`basename $LINK`" if [ -n "`echo $LINK_PATH | grep \"$TDEDIR/share/applications/kde\"`" ]; then NEW_LINK_PATH="`echo \"$LINK_PATH\" | sed 's|/share/applications/kde|/share/applications/tde|'`" fi unlink $i ln -sf "$NEW_LINK_PATH/$LINK_NAME" "$LINK_NAME" if [ "$?" != "0" ]; then Message_Prefix echo "There was an error with creating a new sym link for $LINK." 1>&2 KDEGLOBALS_KEY_VALUE="autostart" fi done ) # Update the user's customized menu. if [ -r $HOME/.config/menus/applications-kmenuedit.menu ]; then sed -i 's|kde-|tde-|g' $HOME/.config/menus/applications-kmenuedit.menu fi # Perform some nominal update validations. # First clean house from any previous failures. rm -f ${CACHE_DIR}/${SCRIPT_NAME}-test*.txt # This first test includes *.desktop files in the profile Autostart directory. TEST_NUM="1" R14_UPDATE_TEST1="`find \"$PROFILE_DIR\" -name \"*.desktop\" -exec grep \"X-KDE\" {} \; &>${CACHE_DIR}/${SCRIPT_NAME}-test${TEST_NUM}.txt`" if [ "$R14_UPDATE_TEST1" != "" ]; then MESSAGE="Some Trinity profile R14 XDG compliance updates failed.\n\n(Check *.desktop files for 'X-KDE' in\n${CACHE_DIR}/${SCRIPT_NAME}-test${TEST_NUM}.txt.)" Validation_Failure else rm -f ${CACHE_DIR}/${SCRIPT_NAME}-test${TEST_NUM}.txt fi TEST_NUM="2" R14_UPDATE_TEST2="`find \"$PROFILE_DIR\" -name \"*.desktop\" -exec grep -q \"KDE;\" {} \; &>${CACHE_DIR}/${SCRIPT_NAME}-test${TEST_NUM}.txt`" if [ "$R14_UPDATE_TEST2" != "" ]; then MESSAGE="Some Trinity profile R14 XDG compliance updates failed.\n\n(Check *.desktop files for 'KDE;' in\n${CACHE_DIR}/${SCRIPT_NAME}-test${TEST_NUM}.txt.)" Validation_Failure else rm -f ${CACHE_DIR}/${SCRIPT_NAME}-test${TEST_NUM}.txt fi TEST_NUM="3" R14_UPDATE_TEST3="`find \"$PROFILE_DIR\" \"$PROFILE_DIR/share/apps/kmail/mail\" -prune -o -type f -exec grep -q \"$TDEDIR/share/applications/kde\" {} \; &>${CACHE_DIR}/${SCRIPT_NAME}-test${TEST_NUM}.txt`" if [ "$R14_UPDATE_TEST3" != "" ]; then MESSAGE="Some Trinity profile R14 XDG compliance updates failed.\n\n(Check files for '$TDEDIR/share/applications/kde' in\n${CACHE_DIR}/${SCRIPT_NAME}-test${TEST_NUM}.txt.)" Validation_Failure else rm -f ${CACHE_DIR}/${SCRIPT_NAME}-test${TEST_NUM}.txt fi TEST_NUM="4" R14_UPDATE_TEST4="`grep -q \"CommandURL=kde-\" \"$PROFILE_DIR/share/config/khotkeysrc\" &>${CACHE_DIR}/${SCRIPT_NAME}-test${TEST_NUM}.txt`" if [ "$R14_UPDATE_TEST4" != "" ]; then MESSAGE="Some Trinity profile R14 XDG compliance updates failed.\n\n(Check khotkeysrc for 'CommandURL=kde-' in\n${CACHE_DIR}/${SCRIPT_NAME}-test${TEST_NUM}.txt.)" else rm -f ${CACHE_DIR}/${SCRIPT_NAME}-test${TEST_NUM}.txt fi TEST_NUM="5" R14_UPDATE_TEST5="`grep -q \"K Menu - kde-\" \"$PROFILE_DIR/share/config/khotkeysrc\" &>${CACHE_DIR}/${SCRIPT_NAME}-test${TEST_NUM}.txt`" if [ "$R14_UPDATE_TEST5" != "" ]; then MESSAGE="Some Trinity profile R14 XDG compliance updates failed.\n\n(Check khotkeysrc for 'K Menu - kde-' in\n${CACHE_DIR}/${SCRIPT_NAME}-test${TEST_NUM}.txt.)" Validation_Failure else rm -f ${CACHE_DIR}/${SCRIPT_NAME}-test${TEST_NUM}.txt fi TEST_NUM="6" R14_UPDATE_TEST6="`grep -q \"Application=kde-\" \"$PROFILE_DIR/share/config/profilerc\" &>${CACHE_DIR}/${SCRIPT_NAME}-test${TEST_NUM}.txt`" if [ "$R14_UPDATE_TEST6" != "" ]; then MESSAGE="Some Trinity profile R14 XDG compliance updates failed.\n\n(Check profilerc for 'Application=kde-' in\n${CACHE_DIR}/${SCRIPT_NAME}-test${TEST_NUM}.txt.)" Validation_Failure else rm -f ${CACHE_DIR}/${SCRIPT_NAME}-test${TEST_NUM}.txt fi TEST_NUM="7" R14_UPDATE_TEST7="`grep -q \"StorageId\[\$e\]=kde-\" \"$PROFILE_DIR/share/config/kickerrc\" &>${CACHE_DIR}/${SCRIPT_NAME}-test${TEST_NUM}.txt`" if [ "$R14_UPDATE_TEST7" != "" ]; then MESSAGE="Some Trinity profile R14 XDG compliance updates failed.\n\n(Check kickerrc for 'StorageId[$e]=kde-' in\n${CACHE_DIR}/${SCRIPT_NAME}-test${TEST_NUM}.txt.)" Validation_Failure else rm -f ${CACHE_DIR}/${SCRIPT_NAME}-test${TEST_NUM}.txt fi if [ "$QUICK_LAUNCH_CONFIG" != "" ]; then TEST_NUM="8" R14_UPDATE_TEST8="`grep -q \"kde-\" \"$PROFILE_DIR/share/config/$QUICK_LAUNCH_CONFIG\" &>${CACHE_DIR}/${SCRIPT_NAME}-test${TEST_NUM}.txt`" if [ "$R14_UPDATE_TEST8" != "" ]; then MESSAGE="Some Trinity profile R14 XDG compliance updates failed.\n\n(Check $QUICK_LAUNCH_CONFIG for 'kde-' in\n${CACHE_DIR}/${SCRIPT_NAME}-test${TEST_NUM}.txt.)" Validation_Failure else rm -f ${CACHE_DIR}/${SCRIPT_NAME}-test${TEST_NUM}.txt fi fi if [ -r $HOME/.config/menus/applications-kmenuedit.menu ]; then TEST_NUM="9" R14_UPDATE_TEST9="`grep -q \"kde-\" \"$HOME/.config/menus/applications-kmenuedit.menu\" &>${CACHE_DIR}/${SCRIPT_NAME}-test${TEST_NUM}.txt`" if [ "$R14_UPDATE_TEST9" != "" ]; then MESSAGE="Some Trinity profile R14 XDG compliance updates failed.\n\n(Check applications-kmenuedit.menu for 'kde-' in\n${CACHE_DIR}/${SCRIPT_NAME}-test${TEST_NUM}.txt.)" Validation_Failure else rm -f ${CACHE_DIR}/${SCRIPT_NAME}-test${TEST_NUM}.txt fi fi if [ "$R14_UPDATE_TEST1" = "" ] && [ "$R14_UPDATE_TEST2" = "" ] && [ "$R14_UPDATE_TEST3" = "" ] \ && [ "$R14_UPDATE_TEST4" = "" ] && [ "$R14_UPDATE_TEST5" = "" ] && [ "$R14_UPDATE_TEST6" = "" ] \ && [ "$R14_UPDATE_TEST7" = "" ] && [ "$R14_UPDATE_TEST8" = "" ] && [ "$R14_UPDATE_TEST9" = "" ]; then $TDEDIR/bin/kwriteconfig --file kdeglobals --group "R14 XDG Updates" --key Updated --type bool "true" else # Don't use the --type parameter here because the value no longer is boolean. $TDEDIR/bin/kwriteconfig --file kdeglobals --group "R14 XDG Updates" --key Updated "$KDEGLOBALS_KEY_VALUE" fi else echo "This script has been run at least once previously. To run manually pass the 'force' parameter." fi unset PROFILE_DIR unset R14_UPDATED unset TDEHOME_LINK unset R14_UPDATE_TEST1 unset R14_UPDATE_TEST2 unset R14_UPDATE_TEST3 unset R14_UPDATE_TEST4 unset R14_UPDATE_TEST5 unset R14_UPDATE_TEST6 unset KDEGLOBALS_KEY_VALUE unset TEST_NUM exit 0