#!/bin/sh # # DEFAULT TRINITY STARTUP SCRIPT # # This block might not be appropriate for all systems. # It should work for command line logins but graphical # login managers might already source these files. # Multiple sourcing is not a problem when the files are only # containers for environment variables and such. if [ -r /etc/xprofile ]; then source /etc/xprofile fi if [ -r $HOME/.xprofile ]; then source $HOME/.xprofile fi # Some functions to parse and check path correctly ... # Usage: is_in_path PATH /usr/bin is_in_path() { var="$1"; search="$2"; if eval test -z \$$1; then return 1; fi ifs="$IFS"; IFS=":"; eval set \$$var; IFS="$ifs" for i in $*; do [ "${i}" = "${search}" ] && return 0 done return 1 } # Usage: is_before_in_path ENV_VAR var before_var # Return 0 if 'var' is before 'before_var' in 'ENV_VAR', 1 otherwise is_before_in_path() { [ $# -ge 3 ] || return 1 var="$1"; search="$2"; before="$3" ifs="$IFS"; IFS=":"; eval set \$$var; IFS="$ifs" for i in $*; do [ "${i}" = "${search}" ] && return 0 [ "${i}" = "${before}" ] && return 1 done return 1 } # Usage: place_before_in_path PATH /opt/trinity/games /usr/games place_before_in_path() { var="$1"; insert="$2"; if eval test -z \$$1; then eval export $var=${insert} else before="$3"; ifs="$IFS"; IFS=":"; eval set \$$var; IFS="$ifs" NPATH="" for i in $*; do [ "${i}" = "${before}" ] && NPATH="${NPATH}:${insert}" NPATH="${NPATH}:${i}" done eval export $var=${NPATH#:} fi } # Usage: remove_from_path PATH /opt/trinity/games remove_from_path() { var="$1"; remove="$2"; if eval test -z \$$1; then return 1; fi ifs="$IFS"; IFS=":"; eval set \$$var; IFS="$ifs" NPATH="" for i in $*; do [ "${i}" != "${remove}" ] && NPATH="${NPATH}:${i}" done eval export $var=${NPATH#:} } echo "[starttde] Starting starttde." 1>&2 echo "[starttde] This script is $0" 1>&2 # Avoid any possible conflict with KDE4. Therefore within this script # use full path names to all binaries used. # The binaries for TDE are located in the same place as this script. # To determine that location use the following method rather than presuming # the existence of $TDEDIR. That environment variable might not be # defined or defined to point to KDE4 binaries. BIN_DIR="`dirname \`readlink -f $0\``" if [ -x $BIN_DIR/tde-config ]; then TDE_VERSION=$($BIN_DIR/tde-config --version | while IFS=: read a b; do [ "${a#TDE}" != "$a" ] && echo $b; done) echo "[starttde] TDE version is $TDE_VERSION" 1>&2 export TDEDIR=${BIN_DIR%/bin} echo "[starttde] TDE base directory is $TDEDIR" 1>&2 else echo "[starttde] Unable to determine the TDE bin directory, where this script should be installed." echo "[starttde] This script should be installed in the same directory." echo "[starttde] Exiting." exit 1 fi unset BIN_DIR # When the X server dies we get a HUP signal from xinit. We must ignore it # because we still need to do some cleanup. trap 'echo "[starttde] GOT SIGHUP"' HUP # Check if a TDE session is already running. if kcheckrunning >/dev/null 2>&1; then echo "[starttde] TDE seems to be already running on this display." xmessage -center -geometry 500x100 "TDE seems to be already running on this display." > /dev/null 2>/dev/null exit 1 fi # Set the background color. # The standard X background is nasty, causing moire effects and exploding # people's heads. We use colours from the standard TDE palette for those with # palettised displays. if test -z "$XDM_MANAGED" || echo "$XDM_MANAGED" | grep ",auto" > /dev/null; then xsetroot -solid "#618DCC" # sky blue fi # Unset this for Darwin since it will screw up TDE's dynamic-loading. unset DYLD_FORCE_FLAT_NAMESPACE # Check whether prelinking is enabled. If yes, then exporting TDE_IS_PRELINKED improves # loading TDE. The $TDE_IS_PRELINKED variable might already be set on some systems # through /etc/profile.d. Therefore first check whether the variable exists. if [ "$TDE_IS_PRELINKED" = "" ]; then if [ -r /etc/default/prelink ]; then . /etc/default/prelink elif [ -r /etc/sysconfig/prelink ]; then . /etc/sysconfig/prelink fi if [ "$PRELINKING" = "yes" ]; then export TDE_IS_PRELINKED=1 fi fi # Boot sequence: # # tdeinit is used to fork off processes which improves memory usage # and startup time. # # * tdeinit starts the dcopserver and tdelauncher first. # * Then kded is started. kded is responsible for keeping the sycoca # database up to date. When an up to date database is present it goes # into the background and the startup continues. # * Then tdeinit starts kcminit. kcminit performs initialisation of # certain devices according to the user's settings # # * Then ksmserver is started which takes control of the rest of the startup sequence. # The user's personal TDE directory usually is $HOME/.trinity. # This setting may be overridden by setting $TDEHOME. When migrating profiles # must be careful here because $HOME/.kde was used commonly in the pre-KDE4 # days for the user's TDE profile, but now with KDE4 common on systems, # $HOME/.kde might point to KDE4 profile settings. The existence of KDE4 # does not mean all people are using KDE4. if [ "$TDEHOME" != "" ]; then echo "[starttde] TDEHOME is preset to $TDEHOME." 1>&2 export TDEHOME=$TDEHOME else # $TDEHOME is NOT already preset in the environment. Try to help. # This might be overkill but does provide flexibility. # This script and kstandardirs.h and kstandardirs.cpp must match. # The latter two must be edited/patched before compiling. echo "[starttde] TDEHOME is not set." 1>&2 # Default value: $HOME/.trinity. Most users will use this. export TDEHOME=$HOME/.trinity if [ ! -d $HOME/.trinity ] && [ ! -f /usr/bin/kde4-config ] && [ "$TDEDIR"="/usr" ] && [ -d $HOME/.kde ]; then # Looks like Trinity is installed and not playing second fiddle to KDE4. export TDEHOME=$HOME/.kde fi echo "[starttde] Set TDEHOME to $TDEHOME." 1>&2 fi # tdesu needs something to find root's TDE profile. Set the TDEROOTHOME variable # here as last resort. /root/.trinity is a safe presumption. If an admin wants # a different location then set the TDEROOTHOME variable elsewhere. if [ "$TDEROOTHOME" = "" ]; then export TDEROOTHOME=/root/.trinity echo "[starttde] Setting TDEROOTHOME to $TDEROOTHOME." fi # Modify the following environment variables only as necessary. if [ -d $TDEDIR/games ]; then if ! is_in_path PATH "$TDEDIR/games" ; then # Respect the traditional path order. Don't blindly place $TDEDIR/games # first in the path. Only place $TDEDIR/games before /usr/games. If packagers # are adding $TDEDIR/games elsewhere, then they need to ensure the traditional # search patch is respected. # Is there a way we can check that $TDEDIR/games is always placed only just before # /usr/games in the search path? if is_in_path PATH "/usr/games"; then place_before_in_path PATH "$TDEDIR/games" "/usr/games" else export PATH=$TDEDIR/games:$PATH fi fi fi if [ -d $TDEDIR/bin ]; then if ! is_in_path PATH "$TDEDIR/bin" ]; then # Respect the traditional path order. Don't blindly place $TDEDIR/bin # first in the path. Only place $TDEDIR/bin before /usr/bin. This order is # consistent with tdelibs/tdesu/stub.cpp. If packagers are adding $TDEDIR/bin # elsewhere, then they need to ensure the traditional search patch is respected. # Is there a way we can check that $TDEDIR/bin is always placed only just before # /usr/bin in the search path? if is_in_path PATH "/usr/bin"; then place_before_in_path PATH "$TDEDIR/bin" "/usr/bin" else export PATH=$TDEDIR/bin:$PATH fi fi fi if [ -d $TDEDIR/share/man ]; then if [ -x /usr/bin/manpath ]; then if [ "`manpath 2>/dev/null | grep \"$TDEDIR/share/man\"`" = "" ]; then export MANPATH=$TDEDIR/share/man:$MANPATH fi else if [ "`echo $MANPATH | grep \"$TDEDIR/share/man\"`" = "" ]; then export MANPATH=$TDEDIR/share/man:$MANPATH fi fi fi if [ "$XDG_CONFIG_DIRS" = "" ]; then if [ -d /etc/xdg ]; then XDG_CONFIG_DIRS=/etc/xdg fi fi if [ -d /etc/trinity/xdg ]; then TDE_XDG_DIR="/etc/trinity/xdg" elif [ -d /etc/tde/xdg ]; then TDE_XDG_DIR="/etc/tde/xdg" elif [ -d $TDEDIR/xdg ]; then TDE_XDG_DIR="$TDEDIR/xdg" elif [ -d $TDEDIR/etc/xdg ]; then TDE_XDG_DIR="$TDEDIR/etc/xdg" elif [ -d $TDEDIR/etc/trinity/xdg ]; then TDE_XDG_DIR="$TDEDIR/etc/trinity/xdg" elif [ -d $TDEDIR/etc/tde/xdg ]; then TDE_XDG_DIR="$TDEDIR/etc/tde/xdg" elif [ -d $TDEDIR/trinity/xdg ]; then TDE_XDG_DIR="$TDEDIR/trinity/xdg" elif [ -d $TDEDIR/tde/xdg ]; then TDE_XDG_DIR="$TDEDIR/tde/xdg" fi if [ -d $TDE_XDG_DIR ]; then if [ "`echo $XDG_CONFIG_DIRS | grep \"$TDE_XDG_DIR\"`" = "" ]; then if [ "$XDG_CONFIG_DIRS" = "" ]; then XDG_CONFIG_DIRS=$TDE_XDG_DIR else XDG_CONFIG_DIRS=$TDE_XDG_DIR:$XDG_CONFIG_DIRS fi fi fi if [ "$XDG_CONFIG_DIRS" != "" ]; then export XDG_CONFIG_DIRS fi # Explicitly set $XDG_DATA_DIRS only when Trinity is not installed in /usr. # Explicitly declaring $XDG_DATA_DIRS will override the default search path of /usr/share. # Explicitly declaring $XDG_DATA_DIRS will override $TDEDIRS, which must then be # explicitly identified in the $XDG_DATA_DIRS string to remain useful. # The $TDEDIR variable is intended to be singular and $TDEDIRS plural. When $TDEDIRS # exists in the environment then parse that variable into separate directories. # $TDEDIRS should contain whatever is set in $TDEDIR. Therefore any additional directories # set in $TDEDIRS are intended to override data files found in $TDEDIR. Those additional # directories should be placed before $TDEDIR and before /usr/share. if [ "$TDEDIR" != "/usr" ] && [ -d $TDEDIR/share ]; then # If '/usr/share' is not already there, we include it at the last position. if ! is_in_path XDG_DATA_DIRS "/usr/share"; then if [ "$XDG_DATA_DIRS" = "" ]; then XDG_DATA_DIRS=/usr/share # In case XDG_DATA_DIRS is empty, to avoid a leading : else XDG_DATA_DIRS=$XDG_DATA_DIRS:/usr/share fi fi # If '/usr/local/share' is not already there, we include it before '/usr/share' if ! is_in_path XDG_DATA_DIRS "/usr/local/share"; then place_before_in_path XDG_DATA_DIRS "/usr/local/share" "/usr/share" fi # Ensure that $TDEDIR/share is always before '/usr/local/share' and '/usr/share'. if ! is_in_path XDG_DATA_DIRS "$TDEDIR/share" || is_before_in_path XDG_DATA_DIRS "/usr/local/share" "$TDEDIR/share" || is_before_in_path XDG_DATA_DIRS "/usr/share" "$TDEDIR/share"; then remove_from_path XDG_DATA_DIRS "$TDEDIR/share" if is_before_in_path XDG_DATA_DIRS "/usr/local/share" "/usr/share"; then place_before_in_path XDG_DATA_DIRS "$TDEDIR/share" "/usr/local/share" else place_before_in_path XDG_DATA_DIRS "$TDEDIR/share" "/usr/share" fi fi # Adds supplementary directories from TDEDIRS, if any, before TDEDIR. if [ "$TDEDIRS" != "" ]; then ifs="$IFS"; IFS=":"; set $TDEDIRS; IFS="$ifs" for dir in $*; do if ! is_in_path XDG_DATA_DIRS "$dir/share" && [ -d "$dir/share" ]; then XDG_DATA_DIRS=$dir/share:$XDG_DATA_DIRS fi done fi export XDG_DATA_DIRS fi echo "[starttde] XDG_DATA_DIRS: $XDG_DATA_DIRS" 1>&2 test -n "$TDEHOME" && tdehome=`echo "$TDEHOME" | sed "s,^~/,$HOME/,"` # Allow interested applications, such as the Plasma control wrapper, # to know that this is a Trinity desktop and not a KDE one. export DESKTOP_SESSION=trinity # Create profile directory. if [ ! -d "$tdehome" ]; then echo "[starttde] Creating $tdehome" 1>&2 mkdir -m 700 -p "$tdehome" fi if [ -d "$tdehome" ]; then # Run some R14 updates. R14_UPDATED="`$TDEDIR/bin/kreadconfig --file kdeglobals --group "R14 XDG Updates" --key Updated --default false`" R14_VERSION="`$TDEDIR/bin/kreadconfig --file kdeglobals --group "R14 XDG Updates" --key Version --default 0`" if [ -e $TDEDIR/bin/r14-xdg-update ]; then # Script version index is used to allow automatic rerun R14_SCRIPT="`sed -n "s/SCRIPT_VERSION=\([0-9]*\)/\1/p" $TDEDIR/bin/r14-xdg-update`" else R14_SCRIPT=0 fi if [ "$R14_UPDATED" != "true" ] || [ "$R14_VERSION" -lt "$R14_SCRIPT" ]; then if [ -e $TDEDIR/bin/r14-xdg-update ]; then sh $TDEDIR/bin/r14-xdg-update EXIT_CODE="$?" else echo "[starttde] $TDEDIR/bin/r14-xdg-update does not exist." 1>&2 echo " Unable to perform a profile update for Trinity release R14." fi if [ "$EXIT_CODE" != "0" ]; then exit 1 fi fi fi # Please see tdestartupconfig source for usage. mkdir -m 700 -p "$tdehome/share" mkdir -m 700 -p "$tdehome/share/config" cat >"$tdehome/share/config/startupconfigkeys" <<EOF kcminputrc Mouse cursorTheme '' kcminputrc Mouse cursorSize '' kpersonalizerrc General FirstLogin true ksplashrc KSplash Theme Default kcmrandrrc Display ApplyOnStartup false kcmrandrrc [Screen0] kcmrandrrc [Screen1] kcmrandrrc [Screen2] kcmrandrrc [Screen3] kcmfonts General forceFontDPI 0 EOF $TDEDIR/bin/tdestartupconfig if test $? -ne 0; then xmessage -center -geometry 500x100 "Could not start tdestartupconfig. Check your installation." fi # $tdehome/share/config/startupconfig should exist but avoid script failure if not. if [ -r "$tdehome/share/config/startupconfig" ]; then . "$tdehome/share/config/startupconfig" fi # Make sure a default wallpaper is set. if [ ! -e "$tdehome/share/config/kdesktoprc" ]; then # With Trinity this file should exist, but test first. if [ -r $TDEDIR/share/wallpapers/Trinity-lineart.svg.desktop ]; then cat >"$tdehome/share/config/kdesktoprc" <<EOF [Desktop0] Wallpaper=Trinity-lineart.svg WallpaperMode=Scaled EOF fi fi # XCursor mouse theme needs to be applied here to work even for kded or ksmserver. if test -n "$kcminputrc_mouse_cursortheme" -o -n "$kcminputrc_mouse_cursorsize" ; then kapplymousetheme "$kcminputrc_mouse_cursortheme" "$kcminputrc_mouse_cursorsize" if test $? -eq 10; then export XCURSOR_THEME=default elif test -n "$kcminputrc_mouse_cursortheme"; then export XCURSOR_THEME="$kcminputrc_mouse_cursortheme" fi if test -n "$kcminputrc_mouse_cursorsize"; then export XCURSOR_SIZE="$kcminputrc_mouse_cursorsize" fi fi if test "$kcmrandrrc_display_applyonstartup" = "true"; then # 4 screens is hopefully enough. for scrn in 0 1 2 3; do args= width="\$kcmrandrrc_screen${scrn}_width" ; eval "width=$width" height="\$kcmrandrrc_screen${scrn}_height" ; eval "height=$height" if test -n "${width}" -a -n "${height}"; then args="$args -s ${width}x${height}" fi refresh="\$kcmrandrrc_screen${scrn}_refresh" ; eval "refresh=$refresh" if test -n "${refresh}"; then args="$args -r ${refresh}" fi rotation="\$kcmrandrrc_screen${scrn}_rotation" ; eval "rotation=$rotation" if test -n "${rotation}"; then case "${rotation}" in 0) args="$args -o 0" ;; 90) args="$args -o 1" ;; 180) args="$args -o 2" ;; 270) args="$args -o 3" ;; esac fi reflectx="\$kcmrandrrc_screen${scrn}_reflectx" ; eval "reflectx=$reflectx" if test "${refrectx}" = "true"; then args="$args -x" fi reflecty="\$kcmrandrrc_screen${scrn}_reflecty" ; eval "reflecty=$reflecty" if test "${refrecty}" = "true"; then args="$args -y" fi if test -n "$args"; then xrandr $args fi done fi dl=$DESKTOP_LOCKED unset DESKTOP_LOCKED # Don't want it in the environment # Launch splash that doesn't need any TDE libraries here, before # TDE libraries are loaded into memory (which may take some time # with cold caches). Makes the splash appear sooner. # If kpersonalizer needs to be run splash will be started only later. if test -z "$dl" && test "$kpersonalizerrc_general_firstlogin" != "true"; then case "$ksplashrc_ksplash_theme" in Simple) ksplashsimple ;; *) ;; esac fi if test "$kcmfonts_general_forcefontdpi" -eq 120; then xrdb -quiet -merge -nocpp <<EOF Xft.dpi: 120 EOF elif test "$kcmfonts_general_forcefontdpi" -eq 96; then xrdb -quiet -merge -nocpp <<EOF Xft.dpi: 96 EOF fi # Configuration of the gtk_qt_engine if not already set. if test -n "$TDEDIRS"; then tdedirs_first=${TDEDIRS%%:*} TGTK_RC_ENGINE=$tdedirs_first/share/kgtk/gtk-qt-engine.rc.sh TGTK_RC_TDE1=$tdedirs_first/share/kgtk/.gtkrc-2.0-kde4 TGTK_RC_TDE2=$tdedirs_first/share/kgtk/.gtkrc-2.0-kde-kde4 else TGTK_RC_ENGINE=$TDEDIR/share/kgtk/gtk-qt-engine.rc.sh TGTK_RC_TDE1=$TDEDIR/share/kgtk/.gtkrc-2.0-kde4 TGTK_RC_TDE2=$TDEDIR/share/kgtk/.gtkrc-2.0-kde-kde4 fi if [ ! -e "$tdehome/env/gtk-qt-engine.rc.sh" ] && [ -e $TGTK_RC_ENGINE ]; then mkdir -p "$tdehome/env" cp -f $TGTK_RC_ENGINE "$tdehome/env" chmod 755 "$tdehome/env/gtk-qt-engine.rc.sh" fi if [ ! -e $HOME/.gtkrc-2.0-kde4 ] && [ -e $TGTK_RC_TDE1 ] then cp -f $TGTK_RC_TDE1 $HOME fi if [ ! -e $HOME/.gtkrc-2.0-kde-kde4 ] && [ -e $TGTK_RC_TDE2 ] then cp -f $TGTK_RC_TDE2 $HOME fi # Source scripts found in <localprefix>/env/*.sh and <prefixes>/env/*.sh # (where <localprefix> is $TDEHOME or ~/.trinity, and <prefixes> is where TDE is installed) # # This is where you can define environment variables that will be available to # all TDE programs. That is where to run agents using for example, eval `ssh-agent` # or eval `gpg-agent --daemon`. # Note: if you do that, you should also put "ssh-agent -k" as a shutdown script. # (Read the end of this script for running shutdown scripts). # For anything else (that doesn't set env vars, or that needs a window manager), # better use the Autostart folder. exepath=`tde-config --path exe | tr : '\n'` for prefix in `echo "$exepath" | sed -n -e 's,/bin[^/]*/,/env/,p'`; do for file in "$prefix"*.sh; do test -r "$file" && . "$file" done done # Activate the TDE font directories. # # There are 4 directories that may be used for supplying fonts for TDE. # # There are two system directories. These belong to the administrator. # There are two user directories, where the user may add her own fonts. # # The 'override' versions are for fonts that should come first in the list, # i.e. if you have a font in your 'override' directory, it will be used in # preference to any other. # # The preference order looks like this: # user override, system override, X, user, system. # # Where X is the original font database that was set up before this # script runs. usr_odir=$HOME/.fonts/kde-override usr_fdir=$HOME/.fonts # Add any user-installed font directories to the X font path. tde_fontpaths=$usr_fdir/fontpaths do_usr_fdir=1 do_usr_odir=1 if test -r "$tde_fontpaths" ; then savifs=$IFS IFS=" " for fpath in `grep -v '^[ ]*#' < "$tde_fontpaths"` ; do rfpath=`echo $fpath | sed "s:^~:$HOME:g"` if test -s "$rfpath"/fonts.dir; then xset fp+ "$rfpath" if test "$rfpath" = "$usr_fdir"; then do_usr_fdir=0 fi if test "$rfpath" = "$usr_odir"; then do_usr_odir=0 fi fi done IFS=$savifs fi echo "[starttde] TDEDIR: $TDEDIR" 1>&2 echo "[starttde] TDEDIRS: $TDEDIRS" 1>&2 if test -n "$TDEDIRS"; then tdedirs_first=${TDEDIRS%%:*} sys_odir=$tdedirs_first/share/fonts/override sys_fdir=$tdedirs_first/share/fonts else sys_odir=$TDEDIR/share/fonts/override sys_fdir=$TDEDIR/share/fonts fi if test -n "$TDEDIRS"; then tdedirs_first=${TDEDIRS%%:*} echo "[starttde] tdedirs_first: $tdedirs_first" if [ -r $tdedirs_first/share/kgtk/preload ]; then echo "[starttde] Reading from $tdedirs_first/share/kgtk/preload" read -r TGTK_PRELOAD < $tdedirs_first/share/kgtk/preload fi else if [ -r $TDEDIR/share/kgtk/preload ]; then read -r TGTK_PRELOAD < $TDEDIR/share/kgtk/preload fi fi if [ "$TGTK_PRELOAD" != "" ]; then if [ -e /usr/lib64/libnspr4.so ]; then TGTK_NSPR_PRELOAD="/usr/lib64/libnspr4.so:" elif [ -e /usr/lib/libnspr4.so ]; then TGTK_NSPR_PRELOAD="/usr/lib/libnspr4.so:" fi export LD_PRELOAD=$TGTK_PRELOAD:$KGTK_NSPR_PRELOAD$LD_PRELOAD fi # We run mkfontdir on the user's font dirs (if we have permission) to pick # up any new fonts they may have installed. If mkfontdir fails, we still # add the user's dirs to the font path, as they might simply have been made # read-only by the administrator, for whatever reason. # Only do usr_fdir and usr_odir if they are *not* listed in fontpaths. if [ -e $sys_odir/fonts.dir ] then xset +fp "$sys_odir" fi test $do_usr_odir -eq 1 && test -d "$usr_odir" && (mkfontdir "$usr_odir" ; xset +fp "$usr_odir") test $do_usr_fdir -eq 1 && test -d "$usr_fdir" && (mkfontdir "$usr_fdir" ; xset fp+ "$usr_fdir") test -d "$sys_fdir" && xset fp+ "$sys_fdir" # Ask X11 to rebuild its font list. xset fp rehash # Set a left cursor instead of the standard X11 "X" cursor, since I've heard # from some users that they're confused and don't know what to do. This is # especially necessary on slow machines, where starting TDE takes one or two # minutes until anything appears on the screen. # # If the user has overwritten fonts, the cursor font may be different now # so don't move this up. # xsetroot -cursor_name left_ptr # Get Ghostscript to look into user's TDE fonts dir for additional Fontmap. if test -n "$GS_LIB" ; then GS_LIB=$usr_fdir:$GS_LIB export GS_LIB else GS_LIB=$usr_fdir export GS_LIB fi # Link "tmp" "socket" and "cache" resources to directory in $TMP. # Creates: # - a directory $TMP/tde-$USER and is linked from $TDEHOME/tmp-$HOSTNAME to it. # - a directory $TMP/tdesocket-$USER and is linked from $TDEHOME/socket-$HOSTNAME to it. # - a directory /var/tmp/tdecache-$USER and is linked from $TDEHOME/cache-$HOSTNAME to it. # Note: temporary locations can be overridden through the TDETMP and TDEVARTMP # environment variables. for resource in tmp cache socket; do if ! lnusertemp $resource >/dev/null; then echo "[starttde] Call to lnusertemp failed (temporary directories full?). Check your installation." 1>&2 xmessage -center -geometry 600x100 "Call to lnusertemp failed (temporary directories full?). Check your installation." exit 1 fi done # In case of dcop sockets left by a previous session, cleanup. $TDEDIR/bin/dcopserver_shutdown echo "[starttde] Starting Trinity..." 1>&2 # Detect any running Xorg composition managers. $TDEDIR/bin/kdetcompmgr # Run KPersonalizer before the session if this is the first login. if test "$kpersonalizerrc_general_firstlogin" = "true"; then if [ ! -x $TDEDIR/bin/kpersonalizer ]; then echo "[starttde] kpersonalizer not found! Please install in order to properly configure your user profile." 1>&2 else # Start only dcopserver, don't start whole tdeinit (takes too long). echo "[starttde] Running kpersonalizer..." 1>&2 $TDEDIR/bin/dcopserver $TDEDIR/bin/twin --lock & $TDEDIR/bin/kpersonalizer --before-session # Handle kpersonalizer restarts (language change). while test $? -eq 1; do $TDEDIR/bin/kpersonalizer --r --before-session done $TDEDIR/bin/dcopquit twin $TDEDIR/bin/dcopserver_shutdown --wait fi fi # Apply any user-specific display configuration settings $TDEDIR/bin/tdeinit_displayconfig EXIT_CODE="$?" # Remove moodin cache if we have a new wallpaper installed, jriddell. Distro-specific. if [ -d "$tdehome/share/apps/ksplash/cache/Moodin/kubuntu" ]; then if [ /usr/share/wallpapers/kubuntu-wallpaper.png -nt "$tdehome/share/apps/ksplash/cache/Moodin/kubuntu/" ]; then rm -rf "$tdehome/share/apps/ksplash/cache/Moodin/kubuntu/" fi fi if test -z "$dl"; then # The splashscreen and progress indicator. case "$ksplashrc_ksplash_theme" in None) ;; # Nothing. Simple) if test "$kpersonalizerrc_general_firstlogin" = "true"; then $TDEDIR/bin/ksplashsimple fi # Otherwise started earlier. ;; *) $TDEDIR/bin/ksplash --nodcop ;; esac fi # Mark that full TDE session is running (for example, Konqueror preloading works only # with full TDE running). The TDE_FULL_SESSION property can be detected by # any X client connected to the same X session, even if not launched # directly from the TDE session but for example, using "ssh -X", tdesu. $TDE_FULL_SESSION # however guarantees that the application is launched in the same environment # like the TDE session and that for example, TDE utilities/libraries are available. # The matching tests are: # For $TDE_FULL_SESSION: # if test -n "$TDE_FULL_SESSION"; then ... whatever # For TDE_FULL_SESSION property: # xprop -root | grep "^TDE_FULL_SESSION" >/dev/null 2>/dev/null # if test $? -eq 0; then ... whatever # # Additionally there is $TDE_SESSION_UID with the uid of the user # running the TDE session. It should be rarely needed (for example, # after sudo to prevent desktop-wide functionality in the new user's kded). # TDE_FULL_SESSION=true export TDE_FULL_SESSION xprop -root -f TDE_FULL_SESSION 8t -set TDE_FULL_SESSION true echo "[starttde] TDE_FULL_SESSION: $TDE_FULL_SESSION" 1>&2 TDE_SESSION_UID=`id -u` export TDE_SESSION_UID echo "[starttde] TDE_SESSION_UID: $TDE_SESSION_UID" 1>&2 # We set LD_BIND_NOW to increase the efficiency of tdeinit. # tdeinit unsets this variable before loading applications. LD_BIND_NOW=true $TDEDIR/bin/start_tdeinit_wrapper --new-startup +kcminit_startup if test $? -ne 0; then # Startup error echo "[starttde] Could not start tdeinit. Check your installation." 1>&2 xmessage -center -geometry 500x100 "Could not start tdeinit. Check your installation." fi echo "[starttde] tdeinit started successfully." 1>&2 # If the session should be locked from the start (locked autologin), # lock now and do the rest of the TDE startup underneath the locker. # FIXME # kdesktop needs to be notified of this locker process somehow so that # it does not attempt to launch its own locker process on startup! if test -n "$dl"; then $TDEDIR/bin/kwrapper kdesktop_lock --forcelock & # Give it some time for starting up. This is somewhat unclean; some # notification would be better. sleep 1 fi # Finally, give the session control to the session manager. # See tdebase/ksmserver for the description of the rest of the startup sequence. # When set, the TDEWM environment variable will be used as Trinity's # window manager instead of twin. # When TDEWM is not set, ksmserver will ensure twin is started. # kwrapper is used to reduce startup time and memory usage. # kwrapper does not return useful error codes such as the exit code of ksmserver. # We only check for 255, which means the ksmserver process could not be # started. Any problems thereafter, for example, ksmserver failing to initialize, # will remain undetected. # tdeinit_phase1 is still experimental. $TDEDIR/bin/tdeinit_phase1 EXIT_CODE="$?" # If tdeinit_phase1 should cause problems, here is the old way: # test -n "$TDEWM" && TDEWM="--windowmanager $TDEWM" # $TDEDIR/bin/kwrapper $TDEDIR/bin/ksmserver $TDEWM # EXIT_CODE="$?" if test $EXIT_CODE -eq 255; then # Startup error echo "[starttde] An error was detected while attempting to load the session manager. Please check your installation for problems." 1>&2 xmessage -center -geometry 500x100 "An error was detected while attempting to load the session manager. Please check your installation for problems." fi # Wait if there's any crashhandler shown. while $TDEDIR/bin/dcop | grep -q ^drkonqi- ; do sleep 5 done echo "[starttde] Shutting down Trinity..." 1>&2 # Clean up. $TDEDIR/bin/tdeinit_shutdown $TDEDIR/bin/dcopserver_shutdown --wait $TDEDIR/bin/artsshell -q terminate # KDE4 support. if [ -f /usr/bin/kdeinit4_shutdown ]; then /usr/bin/kde4 kdeinit4_shutdown 2>/dev/null fi echo "[starttde] Running Trinity shutdown scripts..." 1>&2 # Run scripts found in shutdown directories. Those locations are: # * $TDEHOME/shutdown # * $PREFIX/shutdown # * $TDEDIRS/shutdown ($TDEDIRS, not $TDEDIR) # Presumed is $TDEDIRS/bin exists. Create $TDEDIRS/bin even when # only using the shutdown directory or this snippet will fail to find # that shutdown directory. for prefix in `echo "$exepath" | sed -n -e 's,/bin[^/]*/,/shutdown/,p'`; do for file in `ls "$prefix" 2> /dev/null | egrep -v '(~|\.bak)$'`; do if [ -x "${prefix}${file}" ]; then echo "[starttde] Running ${prefix}${file}." 1>&2 sh ${prefix}${file} fi done done unset TDE_FULL_SESSION xprop -root -remove TDE_FULL_SESSION unset TDE_SESSION_UID echo "[starttde] Trinity shutdown complete." 1>&2