From ce4a32fe52ef09d8f5ff1dd22c001110902b60a2 Mon Sep 17 00:00:00 2001
From: toma <toma@283d02a7-25f6-0310-bc7c-ecb5cbfe19da>
Date: Wed, 25 Nov 2009 17:56:58 +0000
Subject: Copy the KDE 3.5 branch to branches/trinity for new KDE 3.5 features.
 BUG:215923

git-svn-id: svn://anonsvn.kde.org/home/kde/branches/trinity/kdelibs@1054174 283d02a7-25f6-0310-bc7c-ecb5cbfe19da
---
 kate/tests/highlight.asm-avr | 75 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 75 insertions(+)
 create mode 100644 kate/tests/highlight.asm-avr

(limited to 'kate/tests/highlight.asm-avr')

diff --git a/kate/tests/highlight.asm-avr b/kate/tests/highlight.asm-avr
new file mode 100644
index 000000000..dcffc153d
--- /dev/null
+++ b/kate/tests/highlight.asm-avr
@@ -0,0 +1,75 @@
+;********************************************************************
+;* LED flasher: LED will flash with a X on/off ratio at PD6
+;*
+;* NOTE: delay depends in the value of X, 1 is fast, 255 is slow
+;*
+;* No copyright ©1998 RES® * FREEWARE *
+;*
+;* NOTE: Connect a low current LED with a 1k resistor in serie from 
+;*	 Vdd to pin 11 of the MCU. (Or a normal LED with a 330ohm)
+;*									   
+;* RES® can be reached by email: digitalaudio@mail.com		   
+;* or visit the website: http://home.wanadoo.nl/electro1/avr
+;*
+;* Version           :1.0 					   
+;* Date		     :12/26/98
+;* Author	     :Rob's ElectroSoft®
+;* Target MCU        :AT90S1200-12PI@4MHz					   
+;********************************************************************
+
+.include "1200def.inc"
+
+	rjmp	RESET		;reset handle
+
+
+;* Long delay 
+
+;* Register variables
+
+	.def  T1      = r1
+	.def  T2      = r2
+	.def  temp    = r19
+
+;* Code
+	    
+longDelay:      
+	clr   T1		;T1 used as delay 2nd count
+	clr   T2		;T2 used as delay 3d count
+delay_1:    
+	dec   T2
+	brne  delay_1            
+	dec   T1
+	brne  delay_1           
+	dec   temp		;temp must be preset as 
+	brne  delay_1		; delay master count
+	ret                     
+
+
+;* Resets the data direction register D
+
+;* Defines
+
+	.equ  led   = 6		;LED at PD6
+
+;* Code
+
+RESET:
+	sbi   DDRD, led		;connect LED to PORTD pin 6
+	    
+
+;* Main program
+
+;* This part will let the LED go on and off by X
+
+;* Register variables
+
+	.equ  X   =  10 	;enter delaytime X
+
+flash: 
+	sbi   PORTD, led	;LED on
+	ldi   temp, X		;X sec delay           
+	rcall longDelay             
+	cbi   PORTD, led	;LED off            
+	ldi   temp, X		;X sec delay
+	rcall longDelay
+	rjmp  flash		;another run
\ No newline at end of file
-- 
cgit v1.2.1