From f7e71d47719ab6094cf4a9fafffa5ea351973522 Mon Sep 17 00:00:00 2001 From: tpearson Date: Thu, 13 Jan 2011 08:32:36 +0000 Subject: Initial conversion for TQt for Qt4 3.4.0 TP2 This will also compile with TQt for Qt3, and should not cause any problems with dependent modules such as kdebase. If it does then it needs to be fixed! git-svn-id: svn://anonsvn.kde.org/home/kde/branches/trinity/kdelibs@1214149 283d02a7-25f6-0310-bc7c-ecb5cbfe19da --- kdecore/malloc/malloc.c | 114 ++++++++++++++++++++++++------------------------ 1 file changed, 57 insertions(+), 57 deletions(-) (limited to 'kdecore/malloc/malloc.c') diff --git a/kdecore/malloc/malloc.c b/kdecore/malloc/malloc.c index dba0fdef0..56d0b7324 100644 --- a/kdecore/malloc/malloc.c +++ b/kdecore/malloc/malloc.c @@ -85,7 +85,7 @@ int kde_malloc_is_used = 0; calloc(size_t n_elements, size_t element_size); free(Void_t* p); realloc(Void_t* p, size_t n); - memalign(size_t alignment, size_t n); + memalign(size_t tqalignment, size_t n); valloc(size_t n); mallinfo() mallopt(int parameter_number, int parameter_value) @@ -107,7 +107,7 @@ int kde_malloc_is_used = 0; You can adjust this by defining INTERNAL_SIZE_T Alignment: 2 * sizeof(size_t) (default) - (i.e., 8 byte alignment with 4byte size_t). This suffices for + (i.e., 8 byte tqalignment with 4byte size_t). This suffices for nearly all current machines and C compilers. However, you can define MALLOC_ALIGNMENT to be wider than this if necessary. @@ -146,7 +146,7 @@ int kde_malloc_is_used = 0; default used to obtain memory from system) accepts signed arguments, and may not be able to handle size_t-wide arguments with negative sign bit. Generally, values that would - appear as negative after accounting for overhead and alignment + appear as negative after accounting for overhead and tqalignment are supported only via mmap(), which does not have this limitation. @@ -393,8 +393,8 @@ extern "C" { defining INTERNAL_SIZE_T to be a 32 bit `unsigned int' at the expense of not being able to handle more than 2^32 of malloced space. If this limitation is acceptable, you are encouraged to set - this unless you are on a platform requiring 16byte alignments. In - this case the alignment requirements turn out to negate any + this unless you are on a platform requiring 16byte tqalignments. In + this case the tqalignment requirements turn out to negate any potential advantages of decreasing size_t word size. Implementors: Beware of the possible combinations of: @@ -419,11 +419,11 @@ extern "C" { /* - MALLOC_ALIGNMENT is the minimum alignment for malloc'ed chunks. + MALLOC_ALIGNMENT is the minimum tqalignment for malloc'ed chunks. It must be a power of two at least 2 * SIZE_SZ, even on machines - for which smaller alignments would suffice. It may be defined as + for which smaller tqalignments would suffice. It may be defined as larger than this though. Note however that code and data structures - are optimized for the case of 8-byte alignment. + are optimized for the case of 8-byte tqalignment. */ @@ -957,13 +957,13 @@ Void_t* public_rEALLOc(); #endif /* - memalign(size_t alignment, size_t n); + memalign(size_t tqalignment, size_t n); Returns a pointer to a newly allocated chunk of n bytes, aligned - in accord with the alignment argument. + in accord with the tqalignment argument. - The alignment argument should be a power of two. If the argument is + The tqalignment argument should be a power of two. If the argument is not a power of two, the nearest greater power is used. - 8-byte alignment is guaranteed by normal malloc calls, so don't + 8-byte tqalignment is guaranteed by normal malloc calls, so don't bother calling memalign with an argument of 8 or less. Overreliance on memalign is a sure way to fragment space. @@ -1228,7 +1228,7 @@ int public_mTRIm(); Returns the number of bytes you can actually use in an allocated chunk, which may be more than you requested (although - often not) due to alignment and minimum size constraints. + often not) due to tqalignment and minimum size constraints. You can use this many bytes without worrying about overwriting other allocated objects. This is not a particularly great programming practice. malloc_usable_size can be more useful in @@ -1252,8 +1252,8 @@ size_t public_mUSABLe(); number of bytes allocated via malloc (or realloc, etc) but not yet freed. Note that this is the number of bytes allocated, not the number requested. It will be larger than the number requested - because of alignment and bookkeeping overhead. Because it includes - alignment wastage as being in use, this figure may be greater than + because of tqalignment and bookkeeping overhead. Because it includes + tqalignment wastage as being in use, this figure may be greater than zero even when no user-level chunks are allocated. The reported current and maximum system memory can be inaccurate if @@ -1290,7 +1290,7 @@ void public_mSTATs(); fragmentation without improving speed. M_MXFAST is set in REQUEST size units. It is internally used in - chunksize units, which adds padding and alignment. You can reduce + chunksize units, which adds padding and tqalignment. You can reduce M_MXFAST to 0 to disable all use of fastbins. This causes the malloc algorithm to be a closer approximation of fifo-best-fit in all cases, not just for larger requests, but will generally cause it to be @@ -1434,7 +1434,7 @@ void public_mSTATs(); 1. The space cannot be reclaimed, consolidated, and then used to service later requests, as happens with normal chunks. - 2. It can lead to more wastage because of mmap page alignment + 2. It can lead to more wastage because of mmap page tqalignment requirements 3. It causes malloc performance to be more dependent on host system memory management support routines which may vary in @@ -1614,12 +1614,12 @@ Void_t* public_rEALLOc(Void_t* m, size_t bytes) { return m; } -Void_t* public_mEMALIGn(size_t alignment, size_t bytes) { +Void_t* public_mEMALIGn(size_t tqalignment, size_t bytes) { Void_t* m; if (MALLOC_PREACTION != 0) { return 0; } - m = mEMALIGn(alignment, bytes); + m = mEMALIGn(tqalignment, bytes); if (MALLOC_POSTACTION != 0) { } return m; @@ -1938,7 +1938,7 @@ nextchunk-> +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ Note that the `foot' of the current chunk is actually represented as the prev_size of the NEXT chunk. This makes it easier to - deal with alignments etc but can be very confusing when trying + deal with tqalignments etc but can be very confusing when trying to extend or adapt this code. The two exceptions to all this are @@ -1956,7 +1956,7 @@ nextchunk-> +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ */ /* - ---------- Size and alignment checks and conversions ---------- + ---------- Size and tqalignment checks and conversions ---------- */ /* conversion from malloc headers to user pointers, and back */ @@ -1972,7 +1972,7 @@ nextchunk-> +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ #define MINSIZE \ (unsigned long)(((MIN_CHUNK_SIZE+MALLOC_ALIGN_MASK) & ~MALLOC_ALIGN_MASK)) -/* Check if m has acceptable alignment */ +/* Check if m has acceptable tqalignment */ #define aligned_OK(m) (((unsigned long)((m)) & (MALLOC_ALIGN_MASK)) == 0) @@ -2641,7 +2641,7 @@ static void do_check_remalloced_chunk(p, s) mchunkptr p; INTERNAL_SIZE_T s; /* Legal size ... */ assert((sz & MALLOC_ALIGN_MASK) == 0); assert((unsigned long)(sz) >= MINSIZE); - /* ... and alignment */ + /* ... and tqalignment */ assert(aligned_OK(chunk2mem(p))); /* chunk is less than MINSIZE more than request */ assert((long)(sz) - (long)(s) >= 0); @@ -2704,7 +2704,7 @@ static void do_check_malloc_state() /* internal size_t must be no wider than pointer type */ assert(sizeof(INTERNAL_SIZE_T) <= sizeof(char*)); - /* alignment is a power of 2 */ + /* tqalignment is a power of 2 */ assert((MALLOC_ALIGNMENT & (MALLOC_ALIGNMENT-1)) == 0); /* cannot run remaining checks until fully initialized */ @@ -3209,7 +3209,7 @@ static Void_t* sYSMALLOc(nb, av) INTERNAL_SIZE_T nb; mstate av; /* The offset to the start of the mmapped region is stored in the prev_size field of the chunk. This allows us to adjust - returned start address to meet alignment requirements here + returned start address to meet tqalignment requirements here and in memalign(), and still be able to compute proper address argument for later munmap in free() and realloc(). */ @@ -3288,7 +3288,7 @@ static Void_t* sYSMALLOc(nb, av) INTERNAL_SIZE_T nb; mstate av; Round to a multiple of page size. If MORECORE is not contiguous, this ensures that we only call it with whole-page arguments. And if MORECORE is contiguous and - this is not first time through, this preserves page-alignment of + this is not first time through, this preserves page-tqalignment of previous calls. Otherwise, we correct to page-align below. */ @@ -3384,7 +3384,7 @@ static Void_t* sYSMALLOc(nb, av) INTERNAL_SIZE_T nb; mstate av; /* handle contiguous cases */ if (contiguous(av)) { - /* Guarantee alignment of first new chunk made from this space */ + /* Guarantee tqalignment of first new chunk made from this space */ front_misalign = (INTERNAL_SIZE_T)chunk2mem(brk) & MALLOC_ALIGN_MASK; if (front_misalign > 0) { @@ -3454,7 +3454,7 @@ static Void_t* sYSMALLOc(nb, av) INTERNAL_SIZE_T nb; mstate av; double fencepost at old_top to prevent consolidation with space we don't own. These fenceposts are artificial chunks that are marked as inuse and are in any case too small to use. We need - two to make sizes and alignments work out. + two to make sizes and tqalignments work out. */ if (old_size != 0) { @@ -3554,7 +3554,7 @@ Void_t* mALLOc(size_t bytes) /* Convert request size to internal form by adding SIZE_SZ bytes - overhead plus possibly more to obtain necessary alignment and/or + overhead plus possibly more to obtain necessary tqalignment and/or to obtain a size of at least MINSIZE, the smallest allocatable size. Also, checked_request2size traps (returning 0) request sizes that are so large that they wrap around zero when padded and @@ -4127,54 +4127,54 @@ Void_t* rEALLOc(oldmem, bytes) Void_t* oldmem; size_t bytes; INLINE #if __STD_C -Void_t* mEMALIGn(size_t alignment, size_t bytes) +Void_t* mEMALIGn(size_t tqalignment, size_t bytes) #else -Void_t* mEMALIGn(alignment, bytes) size_t alignment; size_t bytes; +Void_t* mEMALIGn(tqalignment, bytes) size_t tqalignment; size_t bytes; #endif { INTERNAL_SIZE_T nb; /* padded request size */ char* m; /* memory returned by malloc call */ mchunkptr p; /* corresponding chunk */ - char* brk; /* alignment point within p */ + char* brk; /* tqalignment point within p */ mchunkptr newp; /* chunk to return */ INTERNAL_SIZE_T newsize; /* its size */ - INTERNAL_SIZE_T leadsize; /* leading space before alignment point */ + INTERNAL_SIZE_T leadsize; /* leading space before tqalignment point */ mchunkptr remainder; /* spare room at end to split off */ unsigned long remainder_size; /* its size */ INTERNAL_SIZE_T size; - /* If need less alignment than we give anyway, just relay to malloc */ + /* If need less tqalignment than we give anyway, just relay to malloc */ - if (alignment <= MALLOC_ALIGNMENT) return mALLOc(bytes); + if (tqalignment <= MALLOC_ALIGNMENT) return mALLOc(bytes); /* Otherwise, ensure that it is at least a minimum chunk size */ - if (alignment < MINSIZE) alignment = MINSIZE; + if (tqalignment < MINSIZE) tqalignment = MINSIZE; - /* Make sure alignment is power of 2 (in case MINSIZE is not). */ - if ((alignment & (alignment - 1)) != 0) { + /* Make sure tqalignment is power of 2 (in case MINSIZE is not). */ + if ((tqalignment & (tqalignment - 1)) != 0) { size_t a = MALLOC_ALIGNMENT * 2; - while ((unsigned long)a < (unsigned long)alignment) a <<= 1; - alignment = a; + while ((unsigned long)a < (unsigned long)tqalignment) a <<= 1; + tqalignment = a; } checked_request2size(bytes, nb); /* - Strategy: find a spot within that chunk that meets the alignment + Strategy: find a spot within that chunk that meets the tqalignment request, and then possibly free the leading and trailing space. */ - /* Call malloc with worst case padding to hit alignment. */ + /* Call malloc with worst case padding to hit tqalignment. */ - m = (char*)(mALLOc(nb + alignment + MINSIZE)); + m = (char*)(mALLOc(nb + tqalignment + MINSIZE)); if (m == 0) return 0; /* propagate failure */ p = mem2chunk(m); - if ((((unsigned long)(m)) % alignment) != 0) { /* misaligned */ + if ((((unsigned long)(m)) % tqalignment) != 0) { /* misaligned */ /* Find an aligned spot inside chunk. Since we need to give back @@ -4184,10 +4184,10 @@ Void_t* mEMALIGn(alignment, bytes) size_t alignment; size_t bytes; total room so that this is always possible. */ - brk = (char*)mem2chunk(((unsigned long)(m + alignment - 1)) & - -((signed long) alignment)); + brk = (char*)mem2chunk(((unsigned long)(m + tqalignment - 1)) & + -((signed long) tqalignment)); if ((unsigned long)(brk - (char*)(p)) < MINSIZE) - brk += alignment; + brk += tqalignment; newp = (mchunkptr)brk; leadsize = brk - (char*)(p); @@ -4208,7 +4208,7 @@ Void_t* mEMALIGn(alignment, bytes) size_t alignment; size_t bytes; p = newp; assert (newsize >= nb && - (((unsigned long)(chunk2mem(p))) % alignment) == 0); + (((unsigned long)(chunk2mem(p))) % tqalignment) == 0); } /* Also give back spare room at the end */ @@ -4375,7 +4375,7 @@ static Void_t** iALLOc(n_elements, sizes, opts, chunks) size_t n_elements; size_ contents_size += request2size(sizes[i]); } - /* subtract out alignment bytes from total to minimize overallocation */ + /* subtract out tqalignment bytes from total to minimize overallocation */ size = contents_size + array_size - MALLOC_ALIGN_MASK; /* @@ -5356,7 +5356,7 @@ History: and Anonymous. * Allow override of MALLOC_ALIGNMENT (Thanks to Ruud Waij for helping test this.) - * memalign: check alignment arg + * memalign: check tqalignment arg * realloc: don't try to shift chunks backwards, since this leads to more fragmentation in some programs and doesn't seem to help in any others. @@ -5409,7 +5409,7 @@ History: * Support another case of realloc via move into top * Fix error occurring when initial sbrk_base not word-aligned. * Rely on page size for units instead of SBRK_UNIT to - avoid surprises about sbrk alignment conventions. + avoid surprises about sbrk tqalignment conventions. * Add mallinfo, mallopt. Thanks to Raymond Nijssen (raymond@es.ele.tue.nl) for the suggestion. * Add `pad' argument to malloc_trim and top_pad mallopt parameter. @@ -5569,7 +5569,7 @@ Void_t* public_rEALLOc(Void_t* m, size_t bytes) { #endif } -Void_t* public_mEMALIGn(size_t alignment, size_t bytes) { +Void_t* public_mEMALIGn(size_t tqalignment, size_t bytes) { #ifndef KDE_MALLOC_FULL if( malloc_type == 1 ) { @@ -5578,16 +5578,16 @@ Void_t* public_mEMALIGn(size_t alignment, size_t bytes) { if (MALLOC_PREACTION != 0) { return 0; } - m = mEMALIGn(alignment, bytes); + m = mEMALIGn(tqalignment, bytes); if (MALLOC_POSTACTION != 0) { } return m; #ifndef KDE_MALLOC_FULL } if( malloc_type == 2 ) - return libc_memalign( alignment, bytes ); + return libc_memalign( tqalignment, bytes ); init_malloc_type(); - return public_mEMALIGn( alignment, bytes ); + return public_mEMALIGn( tqalignment, bytes ); #endif } @@ -5728,7 +5728,7 @@ int public_mALLOPt(int p, int v) { #endif int -posix_memalign (void **memptr, size_t alignment, size_t size) +posix_memalign (void **memptr, size_t tqalignment, size_t size) { void *mem; @@ -5737,7 +5737,7 @@ posix_memalign (void **memptr, size_t alignment, size_t size) if (size % sizeof (void *) != 0 || (size & (size - 1)) != 0) return EINVAL; - mem = memalign (alignment, size); + mem = memalign (tqalignment, size); if (mem != NULL) { *memptr = mem; -- cgit v1.2.1