Trinity Qt initial conversion

git-svn-id: svn://anonsvn.kde.org/home/kde/branches/trinity/kdepim@1157655 283d02a7-25f6-0310-bc7c-ecb5cbfe19da

1 files changed, 37 insertions, 37 deletions

diff --git a/kandy/src/kandy.cpp b/kandy/src/kandy.cpp
index 860aff5bb..d7da32e86 100644
--- a/kandy/src/kandy.cpp
+++ b/kandy/src/kandy.cpp
@@ -22,11 +22,11 @@
     without including the source code for Qt in the source distribution.
 */
 
-#include <qlineedit.h>
-#include <qprinter.h>
-#include <qprintdialog.h>
-#include <qpainter.h>
-#include <qpaintdevicemetrics.h>
+#include <tqlineedit.h>
+#include <tqprinter.h>
+#include <tqprintdialog.h>
+#include <tqpainter.h>
+#include <tqpaintdevicemetrics.h>
 
 #include <kglobal.h>
 #include <klocale.h>
@@ -81,16 +81,16 @@ Kandy::Kandy(CommandScheduler *scheduler)
   setAutoSaveSettings();
 
   // allow the view to change the statusbar and caption
-  connect(mView, SIGNAL(signalChangeStatusbar(const QString&)),
-          this,   SLOT(changeStatusbar(const QString&)));
-  connect(mView, SIGNAL(signalChangeCaption(const QString&)),
-          this,   SLOT(changeCaption(const QString&)));
+  connect(mView, TQT_SIGNAL(signalChangeStatusbar(const TQString&)),
+          this,   TQT_SLOT(changeStatusbar(const TQString&)));
+  connect(mView, TQT_SIGNAL(signalChangeCaption(const TQString&)),
+          this,   TQT_SLOT(changeCaption(const TQString&)));
 
-  connect(mView,SIGNAL(modifiedChanged(bool)),SLOT(setTitle()));
+  connect(mView,TQT_SIGNAL(modifiedChanged(bool)),TQT_SLOT(setTitle()));
 
   KConfig *config = KGlobal::config();
   config->setGroup("General");
-  QString currentProfile = config->readEntry("CurrentProfile",
+  TQString currentProfile = config->readEntry("CurrentProfile",
                                              locate("appdata","default.kandy"));
   if (!currentProfile.isEmpty()) load(currentProfile);
 }
@@ -99,7 +99,7 @@ Kandy::~Kandy()
 {
 }
 
-void Kandy::load(const QString& filename)
+void Kandy::load(const TQString& filename)
 {
   if (!mView->loadFile(filename)) {
     KMessageBox::error(this,i18n("Could not load file %1").arg(filename));
@@ -109,7 +109,7 @@ void Kandy::load(const QString& filename)
   setTitle();
 }
 
-void Kandy::save(const QString & filename)
+void Kandy::save(const TQString & filename)
 {
   if (!filename.isEmpty()) {
     if (!mView->saveFile(filename)) {
@@ -123,26 +123,26 @@ void Kandy::save(const QString & filename)
 
 void Kandy::setupActions()
 {
-  KStdAction::open(this, SLOT(fileOpen()), actionCollection());
-  KStdAction::save(this, SLOT(fileSave()), actionCollection());
-  KStdAction::saveAs(this, SLOT(fileSaveAs()), actionCollection());
-//  KStdAction::print(this, SLOT(filePrint()), actionCollection());
-  KStdAction::quit(this, SLOT(close()), actionCollection());
+  KStdAction::open(this, TQT_SLOT(fileOpen()), actionCollection());
+  KStdAction::save(this, TQT_SLOT(fileSave()), actionCollection());
+  KStdAction::saveAs(this, TQT_SLOT(fileSaveAs()), actionCollection());
+//  KStdAction::print(this, TQT_SLOT(filePrint()), actionCollection());
+  KStdAction::quit(this, TQT_SLOT(close()), actionCollection());
 
   createStandardStatusBarAction();
   setStandardToolBarMenuEnabled(true);
     
-  KStdAction::keyBindings(this, SLOT(optionsConfigureKeys()), actionCollection());
-  KStdAction::configureToolbars(this, SLOT(optionsConfigureToolbars()), actionCollection());
-  KStdAction::preferences(this, SLOT(optionsPreferences()), actionCollection());
+  KStdAction::keyBindings(this, TQT_SLOT(optionsConfigureKeys()), actionCollection());
+  KStdAction::configureToolbars(this, TQT_SLOT(optionsConfigureToolbars()), actionCollection());
+  KStdAction::preferences(this, TQT_SLOT(optionsPreferences()), actionCollection());
 
-  new KAction(i18n("Mobile GUI"),0,this,SLOT(showMobileGui()),
+  new KAction(i18n("Mobile GUI"),0,this,TQT_SLOT(showMobileGui()),
               actionCollection(),"show_mobilegui");
 
-  mConnectAction = new KAction(i18n("Connect"),0,this,SLOT(modemConnect()),
+  mConnectAction = new KAction(i18n("Connect"),0,this,TQT_SLOT(modemConnect()),
                                actionCollection(),"modem_connect");
   mDisconnectAction = new KAction(i18n("Disconnect"),0,this,
-                                  SLOT(modemDisconnect()),actionCollection(),
+                                  TQT_SLOT(modemDisconnect()),actionCollection(),
                                   "modem_disconnect");
 
   createGUI();
@@ -163,7 +163,7 @@ void Kandy::readProperties(KConfig */*config*/)
     // in 'saveProperties'
 }
 
-void Kandy::dragEnterEvent(QDragEnterEvent *event)
+void Kandy::dragEnterEvent(TQDragEnterEvent *event)
 {
     // do nothing
     KMainWindow::dragEnterEvent(event);
@@ -172,7 +172,7 @@ void Kandy::dragEnterEvent(QDragEnterEvent *event)
 //    event->accept(KURLDrag::canDecode(event));
 }
 
-void Kandy::dropEvent(QDropEvent *event)
+void Kandy::dropEvent(TQDropEvent *event)
 {
     // this is a very simplistic implementation of a drop event.  we
     // will only accept a dropped URL.  the Qt dnd code can do *much*
@@ -203,7 +203,7 @@ void Kandy::fileOpen()
     // this slot is called whenever the File->Open menu is selected,
     // the Open shortcut is pressed (usually CTRL+O) or the Open toolbar
     // button is clicked
-    QString filename = KFileDialog::getOpenFileName();
+    TQString filename = KFileDialog::getOpenFileName();
     if (!filename.isEmpty()) load(filename);
 }
 
@@ -215,7 +215,7 @@ void Kandy::fileSave()
 
 void Kandy::fileSaveAs()
 {
-  QString filename = KFileDialog::getSaveFileName();
+  TQString filename = KFileDialog::getSaveFileName();
   save(filename);
 }
 
@@ -225,16 +225,16 @@ void Kandy::filePrint()
     // the Print shortcut is pressed (usually CTRL+P) or the Print toolbar
     // button is clicked
     if (!mPrinter) mPrinter = new QPrinter;
-    if (QPrintDialog::getPrinterSetup(mPrinter))
+    if (TQPrintDialog::getPrinterSetup(mPrinter))
     {
         // setup the printer.  with Qt, you always "print" to a
-        // QPainter.. whether the output medium is a pixmap, a screen,
+        // TQPainter.. whether the output medium is a pixmap, a screen,
         // or paper
-        QPainter p;
+        TQPainter p;
         p.begin(mPrinter);
 
         // we let our view do the actual printing
-        QPaintDeviceMetrics metrics(mPrinter);
+        TQPaintDeviceMetrics metrics(mPrinter);
         mView->print(&p, metrics.height(), metrics.width());
 
         // and send the result to the printer
@@ -252,7 +252,7 @@ void Kandy::optionsConfigureToolbars()
     // use the standard toolbar editor
     saveMainWindowSettings( KGlobal::config(), autoSaveGroup() );
     KEditToolbar dlg(actionCollection());
-    connect(&dlg, SIGNAL(newToolbarConfig()), this, SLOT(newToolbarConfig()));
+    connect(&dlg, TQT_SIGNAL(newToolbarConfig()), this, TQT_SLOT(newToolbarConfig()));
     dlg.exec();
 }
 
@@ -275,13 +275,13 @@ void Kandy::optionsPreferences()
   mPreferencesDialog->raise();
 }
 
-void Kandy::changeStatusbar(const QString& text)
+void Kandy::changeStatusbar(const TQString& text)
 {
     // display the text on the statusbar
     statusBar()->message(text);
 }
 
-void Kandy::changeCaption(const QString& text)
+void Kandy::changeCaption(const TQString& text)
 {
     // display the text on the caption
     setCaption(text);
@@ -300,7 +300,7 @@ bool Kandy::queryClose()
 {
   if (mView->isModified()) {
     switch (KMessageBox::warningYesNoCancel(this,
-        i18n("Save changes to profile %1?").arg(mFilename), QString::null, KStdGuiItem::save(), KStdGuiItem::discard())) {
+        i18n("Save changes to profile %1?").arg(mFilename), TQString::null, KStdGuiItem::save(), KStdGuiItem::discard())) {
       case KMessageBox::Yes :
         fileSave();
         return true;
@@ -342,7 +342,7 @@ void Kandy::showMobileGui()
   emit showMobileWin();
 }
 
-void Kandy::showErrorMessage( const QString &text )
+void Kandy::showErrorMessage( const TQString &text )
 {
   KMessageBox::error( 0, text );
 }