Revert "Rename a number of old tq methods that are no longer tq specific"

This reverts commit 3ca10fd9a2dc631429d3b5d5c5e42a7d211d5a12.

9 files changed, 59 insertions, 59 deletions

diff --git a/kmobile/devices/digicam/libkmobile_digicam.desktop b/kmobile/devices/digicam/libkmobile_digicam.desktop
index adb3c9ab9..6e39cce6b 100644
--- a/kmobile/devices/digicam/libkmobile_digicam.desktop
+++ b/kmobile/devices/digicam/libkmobile_digicam.desktop
@@ -107,6 +107,6 @@ Comment[uk]=Цей драйвер підтримує багато цифрови
 Comment[zh_CN]=此驱动程序支持许多数码相机
 Comment[zh_TW]=此驅動程式支援許多數位相機
 Type=Service
-ServiceTypes=kdedevice/mobiledevice
+ServiceTypes=kdetqdevice/mobiletqdevice
 X-KDE-Library=libkmobile_digicam
 Icon=mobile_camera
diff --git a/kmobile/devices/gammu/libkmobile_gammu.desktop b/kmobile/devices/gammu/libkmobile_gammu.desktop
index f706b6806..daaa2372f 100644
--- a/kmobile/devices/gammu/libkmobile_gammu.desktop
+++ b/kmobile/devices/gammu/libkmobile_gammu.desktop
@@ -101,6 +101,6 @@ Comment[uk]=Цей драйвер підтримує багато мобільн
 Comment[zh_CN]=此驱动程序通过 gammu 库支持许多诺基亚和其它移动电话
 Comment[zh_TW]=此驅動程式支援許多 NOKIA 及其他手機，使用 gammu 函式庫
 Type=Service
-ServiceTypes=kdedevice/mobiledevice
+ServiceTypes=kdetqdevice/mobiletqdevice
 X-KDE-Library=libkmobile_gammu
 Icon=mobile_phone
diff --git a/kmobile/devices/gnokii/gnokii_mobile.cpp b/kmobile/devices/gnokii/gnokii_mobile.cpp
index 48c3b8ae2..bd35ddf8b 100644
--- a/kmobile/devices/gnokii/gnokii_mobile.cpp
+++ b/kmobile/devices/gnokii/gnokii_mobile.cpp
@@ -48,7 +48,7 @@
 #define GNOKII_CHECK_ERROR(error) \
 	do { \
 		if (error) \
-			PRINT_DEBUG << TQString("ERROR %1: %2\n").arg(error).arg(gn_error_print(error));\
+			PRINT_DEBUG << TQString("ERROR %1: %2\n").tqarg(error).tqarg(gn_error_print(error));\
 	} while (0)
 
 
@@ -74,16 +74,16 @@ static gn_calnote_list calnote_list;
 
 
 /**
- *  The KDE gnokii mobile device driver.
+ *  The KDE gnokii mobile tqdevice driver.
  */
 
 KMobileGnokii::KMobileGnokii(TQObject *obj, const char *name, const TQStringList &args )
 	: KMobileDevice(obj, name, args)
 {
-  // set initial device info
+  // set initial tqdevice info
   setClassType( Phone );
-  m_deviceName = i18n("Mobile Phone accessed via GNOKII");
-  m_deviceRevision = "";
+  m_tqdeviceName = i18n("Mobile Phone accessed via GNOKII");
+  m_tqdeviceRevision = "";
   m_connectionName = "/dev/ircomm0";
   setCapabilities( hasAddressBook | hasNotes );
 
@@ -103,8 +103,8 @@ KMobileGnokii::KMobileGnokii(TQObject *obj, const char *name, const TQStringList
 	m_baud = "9600";
   }
 
-  PRINT_DEBUG << TQString("Using GNOKII configuration: %1 %2 %3 %4\n").arg(m_modelnr)
-		.arg(m_connection).arg(m_port).arg(m_baud);
+  PRINT_DEBUG << TQString("Using GNOKII configuration: %1 %2 %3 %4\n").tqarg(m_modelnr)
+		.tqarg(m_connection).tqarg(m_port).tqarg(m_baud);
 
   saveDeviceConfiguration();
   saveGnokiiConfiguration();
@@ -148,7 +148,7 @@ bool KMobileGnokii::setGnokiiStateMachine()
 {
   // set the state machine to our configuration
   qstrncpy( state.config.model, m_modelnr.utf8(), sizeof(state.config.model)-1 );
-  qstrncpy( state.config.port_device, m_port.utf8(), sizeof(state.config.port_device)-1 );
+  qstrncpy( state.config.port_tqdevice, m_port.utf8(), sizeof(state.config.port_tqdevice)-1 );
   state.config.connection_type = connectionToValue(m_connection);
   state.config.serial_baudrate = m_baud.toUInt();
   return true;
@@ -206,7 +206,7 @@ bool KMobileGnokii::loadDeviceConfiguration()
 static void busterminate(void)
 {
 	gn_sm_functions(GN_OP_Terminate, NULL, &state);
-	if (lockfile) gn_device_unlock(lockfile);
+	if (lockfile) gn_tqdevice_unlock(lockfile);
 }
 
 static TQString businit(void)
@@ -222,7 +222,7 @@ static TQString businit(void)
 	aux = gn_cfg_get(gn_cfg_info, "global", "use_locking");
 	// Defaults to 'no'
 	if (aux && !strcmp(aux, "yes")) {
-		lockfile = gn_device_lock(state.config.port_device);
+		lockfile = gn_tqdevice_lock(state.config.port_tqdevice);
 		if (lockfile == NULL) {
 			return i18n("Lock file error.\n "
 			"Please exit all other running instances of gnokii and try again.");
@@ -237,7 +237,7 @@ static TQString businit(void)
 	state.config.require_dcd = old_dcd;
 	if (error != GN_ERR_NONE) {
 		busterminate();
-		return i18n("Mobile phone interface initialization failed:\n%1").arg(gn_error_print(error));
+		return i18n("Mobile phone interface initialization failed:\n%1").tqarg(gn_error_print(error));
 	}
 
 	// model
@@ -265,9 +265,9 @@ static TQString businit(void)
 	data.imei = NULL;
 
 	GNOKII_DEBUG( TQString("Found mobile phone: Model: %1, Revision: %2, IMEI: %3\n")
-				.arg(model).arg(revision).arg(imei) ); 
+				.tqarg(model).tqarg(revision).tqarg(imei) ); 
 
-	PhoneProductId = TQString("%1-%2-%3-%4").arg(APP).arg(model).arg(revision).arg(imei);
+	PhoneProductId = TQString("%1-%2-%3-%4").tqarg(APP).tqarg(model).tqarg(revision).tqarg(imei);
 
 	return TQString();
 }
@@ -282,7 +282,7 @@ static gn_error read_phone_memstat( gn_memory_type memtype, gn_memory_status *me
 	memset(memstat, 0, sizeof(*memstat));
 	memstat->memory_type = memtype;
 	data.memory_status = memstat;
-	error = gn_sm_functions(GN_OP_GetMemoryStatus, &data, &state);
+	error = gn_sm_functions(GN_OP_GetMemorytqStatus, &data, &state);
 	GNOKII_CHECK_ERROR(error);
 	if (error != GN_ERR_NONE) {
 		switch (memtype) {
@@ -299,7 +299,7 @@ static gn_error read_phone_memstat( gn_memory_type memtype, gn_memory_status *me
 		}
 	}
 	GNOKII_DEBUG( TQString("\n\nMobile phone memory status: Type: %1, used=%2, free=%3, total=%4\n\n")
-					.arg(memtype).arg(memstat->used).arg(memstat->free).arg(memstat->used+memstat->free) );
+					.tqarg(memtype).tqarg(memstat->used).tqarg(memstat->free).tqarg(memstat->used+memstat->free) );
 	return error;
 }
 
@@ -372,8 +372,8 @@ static gn_error read_phone_entry_highlevel( int index, const gn_memory_type memt
   if (error != GN_ERR_NONE)
       return error;
 
-  GNOKII_DEBUG(TQString("%1: %2, num=%3, location=%4, group=%5, count=%6\n").arg(index).arg(entry.name)
-	.arg(entry.number).arg(entry.location).arg(entry.caller_group).arg(entry.subentries_count));
+  GNOKII_DEBUG(TQString("%1: %2, num=%3, location=%4, group=%5, count=%6\n").tqarg(index).tqarg(entry.name)
+	.tqarg(entry.number).tqarg(entry.location).tqarg(entry.caller_group).tqarg(entry.subentries_count));
 
   // try to split Name into FamilyName and GivenName
   s = TQString(entry.name).simplifyWhiteSpace();
@@ -395,7 +395,7 @@ static gn_error read_phone_entry_highlevel( int index, const gn_memory_type memt
   }
 
   a->insertCustom(APP, "X_GSM_CALLERGROUP", s.setNum(entry.caller_group));
-  a->insertCustom(APP, "X_GSM_STORE_AT", TQString("%1_%2").arg(GN_MT_ME).arg(entry.location));
+  a->insertCustom(APP, "X_GSM_STORE_AT", TQString("%1_%2").tqarg(GN_MT_ME).tqarg(entry.location));
 
   // set ProductId
   a->setProductId(PhoneProductId);
@@ -403,11 +403,11 @@ static gn_error read_phone_entry_highlevel( int index, const gn_memory_type memt
   // evaluate timestamp (ignore timezone)
   TQDateTime datetime;
   if (entry.date.year<1998)
-	datetime = TQDateTime::currentDateTime();
+	datetime = TQDateTime::tqcurrentDateTime();
   else
 	datetime = TQDateTime( TQDate(entry.date.year, entry.date.month, entry.date.day), 
 			  TQTime(entry.date.hour, entry.date.minute, entry.date.second) );
-  GNOKII_DEBUG(TQString(" date=%1\n").arg(datetime.toString()));
+  GNOKII_DEBUG(TQString(" date=%1\n").tqarg(datetime.toString()));
   a->setRevision(datetime);
 
   if (!entry.subentries_count)
@@ -418,8 +418,8 @@ static gn_error read_phone_entry_highlevel( int index, const gn_memory_type memt
 	 for (int n=0; n<entry.subentries_count; n++) {
 		TQString s = TQString(entry.subentries[n].data.number).simplifyWhiteSpace();
 		GNOKII_DEBUG(TQString(" Subentry#%1, entry_type=%2, number_type=%3, number=%4\n")
-			.arg(n).arg(entry.subentries[n].entry_type)
-			.arg(entry.subentries[n].number_type).arg(s));
+			.tqarg(n).tqarg(entry.subentries[n].entry_type)
+			.tqarg(entry.subentries[n].number_type).tqarg(s));
 		if (s.isEmpty())
 			continue;
 		switch(entry.subentries[n].entry_type) {
@@ -478,7 +478,7 @@ static gn_error read_phone_entry_highlevel( int index, const gn_memory_type memt
 				break;
 		   default:
 				GNOKII_DEBUG(TQString(" Not handled id=%1, entry=%2\n")
-					.arg(entry.subentries[n].entry_type).arg(s));
+					.tqarg(entry.subentries[n].entry_type).tqarg(s));
 				break;
 		  } // switch()
 	} // for(subentry)
@@ -493,7 +493,7 @@ static gn_error read_phone_entry_highlevel( int index, const gn_memory_type memt
 
 
 
-// connect the device and ask user to turn device on (if necessary)
+// connect the tqdevice and ask user to turn tqdevice on (if necessary)
 bool KMobileGnokii::connectDevice(TQWidget * /*parent*/)
 {
   if (connected())
@@ -501,18 +501,18 @@ bool KMobileGnokii::connectDevice(TQWidget * /*parent*/)
 
   TQString err = businit();
   m_connected = err.isEmpty();
-  PRINT_DEBUG << TQString("connectDevice() : %1\n").arg(m_connected ? "Ok" : err);
+  PRINT_DEBUG << TQString("connectDevice() : %1\n").tqarg(m_connected ? "Ok" : err);
   return m_connected;
 }
 
-// disconnect the device and return true, if sucessful
+// disconnect the tqdevice and return true, if sucessful
 bool KMobileGnokii::disconnectDevice(TQWidget * /*parent*/)
 {
   if (!connected())
 	return true;
   busterminate();
   m_connected = false;
-  PRINT_DEBUG << TQString("disconnectDevice() : %1\n").arg("done");
+  PRINT_DEBUG << TQString("disconnectDevice() : %1\n").tqarg("done");
   return true;
 }
 
@@ -545,9 +545,9 @@ TQString KMobileGnokii::iconFileName() const
 
 // return a unique ID, e.g. the IMEI number of phones, or a serial number
 // this String is used to have a unique identification for syncronisation.
-TQString KMobileGnokii::deviceUniqueID()
+TQString KMobileGnokii::tqdeviceUniqueID()
 { 
-  return TQString("GNOKII-IMEI-%1").arg(TQString::fromLocal8Bit(imei));
+  return TQString("GNOKII-IMEI-%1").tqarg(TQString::fromLocal8Bit(imei));
 }
 
 
@@ -587,7 +587,7 @@ int KMobileGnokii::numAddresses()
 
 int KMobileGnokii::readAddress( int index, KABC::Addressee &addr )
 {
-  PRINT_DEBUG << TQString("############   GET ADDRESS #%1\n").arg(index);
+  PRINT_DEBUG << TQString("############   GET ADDRESS #%1\n").tqarg(index);
   // index is zero-based, but in gnokii the first address starts at 1
   if (index<0 || index>=numAddresses())
     return KIO::ERR_DOES_NOT_EXIST;
@@ -609,7 +609,7 @@ int KMobileGnokii::readAddress( int index, KABC::Addressee &addr )
 
 int KMobileGnokii::storeAddress( int, const KABC::Addressee &, bool )
 {
-  /* XXX: this is a read-only device */
+  /* XXX: this is a read-only tqdevice */
   return KIO::ERR_WRITE_ACCESS_DENIED;
 }
 
@@ -870,8 +870,8 @@ int KMobileGnokii::readNote( int index, TQString &note )
 	"DeviceClassName: %3\n"
 	"Device Driver  : %4\n"
 	"Device Revision: %5\n")
-	.arg(index).arg(index)
-	.arg(deviceClassName()).arg(deviceName()).arg(revision()); 
+	.tqarg(index).tqarg(index)
+	.tqarg(tqdeviceClassName()).tqarg(tqdeviceName()).tqarg(revision()); 
   return 0;
 }
 
diff --git a/kmobile/devices/gnokii/gnokii_mobile.h b/kmobile/devices/gnokii/gnokii_mobile.h
index e3fe7bdef..96f32a5c0 100644
--- a/kmobile/devices/gnokii/gnokii_mobile.h
+++ b/kmobile/devices/gnokii/gnokii_mobile.h
@@ -43,13 +43,13 @@ public:
     bool connectDevice(TQWidget *parent);
     bool disconnectDevice(TQWidget *parent);
 
-    // provide a device-specific configure dialog
+    // provide a tqdevice-specific configure dialog
     bool configDialog(TQWidget *parent);
 
     // filename and path to gnokii-icon
     TQString iconFileName() const;
 
-    TQString deviceUniqueID();
+    TQString tqdeviceUniqueID();
 
     /*
      * Addressbook / Phonebook support
diff --git a/kmobile/devices/gnokii/gnokiiconfigui.ui b/kmobile/devices/gnokii/gnokiiconfigui.ui
index e7f6bb31d..d550eb9a2 100644
--- a/kmobile/devices/gnokii/gnokiiconfigui.ui
+++ b/kmobile/devices/gnokii/gnokiiconfigui.ui
@@ -66,7 +66,7 @@
                     <property name="sizeType">
                         <enum>Expanding</enum>
                     </property>
-                    <property name="sizeHint">
+                    <property name="tqsizeHint">
                         <size>
                             <width>20</width>
                             <height>20</height>
@@ -127,7 +127,7 @@
                         <cstring>textLabel2</cstring>
                     </property>
                     <property name="text">
-                        <string>Please configure your Gnokii mobile device</string>
+                        <string>Please configure your Gnokii mobile tqdevice</string>
                     </property>
                 </widget>
                 <spacer row="2" column="0">
@@ -140,7 +140,7 @@
                     <property name="sizeType">
                         <enum>Expanding</enum>
                     </property>
-                    <property name="sizeHint">
+                    <property name="tqsizeHint">
                         <size>
                             <width>20</width>
                             <height>140</height>
@@ -199,7 +199,7 @@
                                     <verstretch>0</verstretch>
                                 </sizepolicy>
                             </property>
-                            <property name="minimumSize">
+                            <property name="tqminimumSize">
                                 <size>
                                     <width>41</width>
                                     <height>0</height>
diff --git a/kmobile/devices/gnokii/libkmobile_gnokii.desktop b/kmobile/devices/gnokii/libkmobile_gnokii.desktop
index 7e732ecd2..986eded04 100644
--- a/kmobile/devices/gnokii/libkmobile_gnokii.desktop
+++ b/kmobile/devices/gnokii/libkmobile_gnokii.desktop
@@ -101,6 +101,6 @@ Comment[uk]=Цей драйвер підтримує багато мобільн
 Comment[zh_CN]=此驱动程序通过 gnokii 库支持许多诺基亚和其它移动电话
 Comment[zh_TW]=此驅動程式支援許多 NOKIA 及其他手機，使用 gnokii 函式庫
 Type=Service
-ServiceTypes=kdedevice/mobiledevice
+ServiceTypes=kdetqdevice/mobiletqdevice
 X-KDE-Library=libkmobile_gnokii
 Icon=mobile_phone
diff --git a/kmobile/devices/skeleton/libkmobile_skeleton.desktop b/kmobile/devices/skeleton/libkmobile_skeleton.desktop
index 72943d15a..2b22ca6eb 100644
--- a/kmobile/devices/skeleton/libkmobile_skeleton.desktop
+++ b/kmobile/devices/skeleton/libkmobile_skeleton.desktop
@@ -102,6 +102,6 @@ Comment[uk]=Прототип мобільного пристрою
 Comment[zh_CN]=移动万能设备
 Comment[zh_TW]=行動通訊空殼裝置
 Type=Service
-ServiceTypes=kdedevice/mobiledevice
+ServiceTypes=kdetqdevice/mobiletqdevice
 X-KDE-Library=libkmobile_skeleton
 Icon=mobile_unknown
diff --git a/kmobile/devices/skeleton/skeleton.cpp b/kmobile/devices/skeleton/skeleton.cpp
index e6b1d9c59..b5073de87 100644
--- a/kmobile/devices/skeleton/skeleton.cpp
+++ b/kmobile/devices/skeleton/skeleton.cpp
@@ -43,16 +43,16 @@ TQObject *KMobileSkeleton::createObject( TQObject *parent, const char *name,
 
 
 /**
- *  The KDE skeleton mobile device driver.
+ *  The KDE skeleton mobile tqdevice driver.
  */
 
 KMobileSkeleton::KMobileSkeleton(TQObject *obj, const char *name, const TQStringList &args )
 	: KMobileDevice(obj, name, args)
 {
-  // set initial device info
+  // set initial tqdevice info
   setClassType( Phone );
-  m_deviceName = i18n("LX-50-Moohoo Addressbook (Skeleton)");
-  m_deviceRevision = "0.1";
+  m_tqdeviceName = i18n("LX-50-Moohoo Addressbook (Skeleton)");
+  m_tqdeviceRevision = "0.1";
   setCapabilities( hasAddressBook | hasNotes );
 }
 
@@ -60,26 +60,26 @@ KMobileSkeleton::~KMobileSkeleton()
 {
 }
 
-// connect the device and ask user to turn device on (if necessary)
+// connect the tqdevice and ask user to turn tqdevice on (if necessary)
 bool KMobileSkeleton::connectDevice(TQWidget *parent)
 {
   if (KMessageBox::Continue != KMessageBox::warningContinueCancel(parent,
-	i18n("Please turn on your %1 on now and press continue to proceed.").arg(m_deviceName),
-	m_deviceClassName ) )
+	i18n("Please turn on your %1 on now and press continue to proceed.").tqarg(m_tqdeviceName),
+	m_tqdeviceClassName ) )
 	return false;
   // connect it now...
   m_connected = true;
   return m_connected;
 }
 
-// disconnect the device and return true, if sucessful
+// disconnect the tqdevice and return true, if sucessful
 bool KMobileSkeleton::disconnectDevice(TQWidget *)
 {
   m_connected = true;
   return true;
 }
 
-// returns true, if this device is read-only (default: false)
+// returns true, if this tqdevice is read-only (default: false)
 bool KMobileSkeleton::isReadOnly() const
 {
   return true;
@@ -87,7 +87,7 @@ bool KMobileSkeleton::isReadOnly() const
 
 // return a unique ID, e.g. the IMEI number of phones, or a serial number
 // this String is used to have a unique identification for syncronisation.
-TQString KMobileSkeleton::deviceUniqueID()
+TQString KMobileSkeleton::tqdeviceUniqueID()
 { 
   return TQString::fromLocal8Bit("SkElEtOn-123456789");
 }
@@ -112,7 +112,7 @@ int KMobileSkeleton::readAddress( int index, KABC::Addressee &addr )
     return KIO::ERR_DOES_NOT_EXIST;
 
   // now build our own sample name
-  addr.setFamilyName(TQString("Meyer_%1").arg(index+1));  
+  addr.setFamilyName(TQString("Meyer_%1").tqarg(index+1));  
   addr.setGivenName("Peter");
   addr.setFormattedName("Peter "+addr.familyName());
   addr.setNickName("PeterM");
@@ -132,7 +132,7 @@ int KMobileSkeleton::readAddress( int index, KABC::Addressee &addr )
 
 int KMobileSkeleton::storeAddress( int, const KABC::Addressee &, bool )
 {
-  /* this is a read-only device */
+  /* this is a read-only tqdevice */
   return KIO::ERR_WRITE_ACCESS_DENIED;
 }
 
@@ -156,8 +156,8 @@ int KMobileSkeleton::readNote( int index, TQString &note )
 	"DeviceClassName: %3\n"
 	"Device Driver  : %4\n"
 	"Device Revision: %5\n")
-	.arg(index).arg(index)
-	.arg(deviceClassName()).arg(deviceName()).arg(revision()); 
+	.tqarg(index).tqarg(index)
+	.tqarg(tqdeviceClassName()).tqarg(tqdeviceName()).tqarg(revision()); 
   return 0;
 }
 
diff --git a/kmobile/devices/skeleton/skeleton.h b/kmobile/devices/skeleton/skeleton.h
index ab3ce7701..6ae0287b9 100644
--- a/kmobile/devices/skeleton/skeleton.h
+++ b/kmobile/devices/skeleton/skeleton.h
@@ -42,14 +42,14 @@ public:
     bool connectDevice(TQWidget *parent);
     bool disconnectDevice(TQWidget *parent);
 
-    // returns true, if this device is read-only (default: false)
+    // returns true, if this tqdevice is read-only (default: false)
     bool isReadOnly() const;
 
     // you may provide your own icon() implementation to display
     // an appropriate Pixmap (e.g. a Palm Pilot or a Zaurus image).
     TQString iconFileName() const;
 
-    TQString deviceUniqueID();
+    TQString tqdeviceUniqueID();
 
     /*
      * Addressbook / Phonebook support