Fixed extraneous error message on suspend

git-svn-id: svn://anonsvn.kde.org/home/kde/branches/trinity/applications/kpowersave@1113226 283d02a7-25f6-0310-bc7c-ecb5cbfe19da

1 files changed, 234 insertions, 233 deletions

diff --git a/src/kpowersave.cpp b/src/kpowersave.cpp
index ab6c088..c746399 100644
--- a/src/kpowersave.cpp
+++ b/src/kpowersave.cpp
@@ -44,17 +44,17 @@
 #include "kpowersave.h"
 #include "infodialog.h"
 
-/*! 
+/*!
 *  \file 	kpowersave.cpp
 *  \brief 	This file contains the main functionality of the kpowersave-applet.*/
 
-/*! 
- * This is the default constructor of the class kpowersave. 
+/*!
+ * This is the default constructor of the class kpowersave.
  */
 kpowersave::kpowersave( bool force_acpi_check, bool trace_func ) : KSystemTray(0, "kpowersave"),
 								   DCOPObject("KPowersaveIface") {
 	trace = trace_func;
-	kdDebugFuncIn(trace); 
+	kdDebugFuncIn(trace);
 
 	display = new screen();
 	settings = new Settings();
@@ -62,7 +62,7 @@ kpowersave::kpowersave( bool force_acpi_check, bool trace_func ) : KSystemTray(0
 	autoDimm = new autodimm();
 	hwinfo = new HardwareInfo();
 	suspend = hwinfo->getSuspendSupport();
-	
+
 	yast2 = NULL;
 
 	resume_result = 0;
@@ -73,7 +73,7 @@ kpowersave::kpowersave( bool force_acpi_check, bool trace_func ) : KSystemTray(0
 		config->writeEntry("AlreadyStarted", true);
 		// check whether APM, ACPI, PMU, CPUFreq or Suspend2Disk/ram supported, otherwise end up
 		// and don't start kpowersave ever again until force_acpi_check == true.
-		if (!hwinfo->hasACPI() && !hwinfo->hasAPM() && !hwinfo->hasPMU() && 
+		if (!hwinfo->hasACPI() && !hwinfo->hasAPM() && !hwinfo->hasPMU() &&
 		    !hwinfo->supportCPUFreq() && !suspend.suspend2disk && !suspend.suspend2ram){
 			config->writeEntry("Autostart", false);
 			config->sync();
@@ -90,7 +90,7 @@ kpowersave::kpowersave( bool force_acpi_check, bool trace_func ) : KSystemTray(0
 		settings->load_scheme_settings( settings->battery_scheme);
 	}
 	// set the battery warning levels
-	hwinfo->setPrimaryBatteriesWarningLevel(settings->batteryWarningLevel, 
+	hwinfo->setPrimaryBatteriesWarningLevel(settings->batteryWarningLevel,
 						settings->batteryLowLevel,
 						settings->batteryCriticalLevel);
 
@@ -101,7 +101,7 @@ kpowersave::kpowersave( bool force_acpi_check, bool trace_func ) : KSystemTray(0
 	connect(hwinfo, SIGNAL(resumed(int)), this, SLOT(forwardResumeSignal(int)));
 
 	// connect to error mesages
-	connect(autoSuspend, SIGNAL(displayErrorMsg(QString)), this, SLOT(showErrorMessage(QString)));	
+	connect(autoSuspend, SIGNAL(displayErrorMsg(QString)), this, SLOT(showErrorMessage(QString)));
 	connect(hwinfo, SIGNAL(halRunning(bool)), this, SLOT(showHalErrorMsg()));
 	connect(hwinfo, SIGNAL(dbusRunning(int)), this, SLOT(showDBusErrorMsg(int)));
 
@@ -115,16 +115,16 @@ kpowersave::kpowersave( bool force_acpi_check, bool trace_func ) : KSystemTray(0
 	connect(autoSuspend, SIGNAL(inactivityTimeExpired()), this, SLOT(do_autosuspendWarn()));
 	connect(autoDimm, SIGNAL(inactivityTimeExpired()), this, SLOT(do_downDimm()));
 	connect(autoDimm, SIGNAL(UserIsActiveAgain()), this, SLOT(do_upDimm()));
-	
+
 	config->sync();
-	
+
 	config_dialog_shown = false;
 	suspend_dialog_shown = false;
 	detailedIsShown = false;
 	hal_error_shown = false;
 	icon_set_colored = false;
 	icon_BG_is_colored = false;
-	
+
  	calledSuspend = -1;
 	countWhiteIconPixel = 0;
 
@@ -133,7 +133,7 @@ kpowersave::kpowersave( bool force_acpi_check, bool trace_func ) : KSystemTray(0
 
 	BAT_WARN_ICON_Timer = new QTimer(this);
 	connect(BAT_WARN_ICON_Timer, SIGNAL(timeout()), this, SLOT(do_setIconBG()));
-	
+
 	DISPLAY_HAL_ERROR_Timer = new QTimer(this);
 	connect(DISPLAY_HAL_ERROR_Timer, SIGNAL(timeout()), this, SLOT(showHalErrorMsg()));
 
@@ -146,7 +146,7 @@ kpowersave::kpowersave( bool force_acpi_check, bool trace_func ) : KSystemTray(0
 
 	kdDebugFuncOut(trace);
 }
-	
+
 
 /*! This is the default destructor of class kpowersave. */
 kpowersave::~kpowersave(){
@@ -168,51 +168,51 @@ void kpowersave::initMenu() {
 	kdDebugFuncIn(trace);
 
 	CONFIGURE_ID = this->contextMenu()->insertItem(SmallIcon("configure", QIconSet::Automatic),
-								  i18n("Configure KPowersave..."), 
+								  i18n("Configure KPowersave..."),
 								  this, SLOT(showConfigureDialog()));
 	CONFIGURE_EVENTS_ID = this->contextMenu()->insertItem(SmallIcon("knotify", QIconSet::Automatic),
-							      i18n("Configure Notifications..."), 
+							      i18n("Configure Notifications..."),
 							      this, SLOT(showConfigureNotificationsDialog()));
 #ifdef ENABLE_YAST_ENTRY
 	YAST_MODULE_MENU_ID = this->contextMenu()->insertItem(SmallIcon("yast", QIconSet::Automatic),
-							      i18n("Start YaST2 Power Management Module..."), 
+							      i18n("Start YaST2 Power Management Module..."),
 							      this, SLOT(do_config()));
 #endif
-	
+
 	SLEEP_SEPARATOR_MENU_ID = this->contextMenu()->insertSeparator();
-	SUSPEND2DISK_MENU_ID = this->contextMenu()->insertItem( SmallIconSet("suspend_to_disk", 
+	SUSPEND2DISK_MENU_ID = this->contextMenu()->insertItem( SmallIconSet("suspend_to_disk",
 								QIconSet::Automatic),
 								i18n("Suspend to Disk"), this,
 								SLOT(do_suspend2disk()));
-	SUSPEND2RAM_MENU_ID = this->contextMenu()->insertItem( SmallIconSet("suspend_to_ram", 
+	SUSPEND2RAM_MENU_ID = this->contextMenu()->insertItem( SmallIconSet("suspend_to_ram",
 							       QIconSet::Automatic),
 							       i18n("Suspend to RAM"), this,
 							       SLOT(do_suspend2ram()));
 	STANDBY_MENU_ID = this->contextMenu()->insertItem( SmallIconSet("stand_by", QIconSet::Automatic),
 							   i18n("Standby"), this, SLOT(do_standby()));
-	
+
 	speed_menu = new QPopupMenu(this, i18n("Set CPU Frequency Policy"));
 	speed_menu->insertItem(i18n("Performance"), PERFORMANCE);
 	speed_menu->insertItem(i18n("Dynamic"), DYNAMIC);
 	speed_menu->insertItem(i18n("Powersave"), POWERSAVE);
-	
+
 	CPUFREQ_SEPARATOR_MENU_ID = contextMenu()->insertSeparator();
-	
+
 	CPUFREQ_MENU_ID = contextMenu()->insertItem(i18n("Set CPU Frequency Policy"), speed_menu);
 	connect(speed_menu, SIGNAL(activated(int)), this, SLOT(do_setSpeedPolicy(int)));
 	connect(hwinfo, SIGNAL(currentCPUFreqPolicyChanged()), this, SLOT(updateCPUFreqMenu()));
 
 
 	SCHEME_SEPARATOR_MENU_ID = contextMenu()->insertSeparator();
-	
+
 	scheme_menu = new QPopupMenu(this, i18n("Set Active Scheme"));
 	SCHEME_MENU_ID = contextMenu()->insertItem(i18n("Set Active Scheme"), scheme_menu);
 	connect(scheme_menu, SIGNAL(activated(int)), this, SLOT(do_setActiveScheme(int)));
-	
-	// menu entry for the autosuspend disable checkbox, disabled by default, only 
+
+	// menu entry for the autosuspend disable checkbox, disabled by default, only
 	// displayed if autosuspend for the current scheme is activated
 	AUTOSUSPEND_SEPARATOR_MENU_ID = contextMenu()->insertSeparator();
-	AUTOSUSPEND_MENU_ID = this->contextMenu()->insertItem( i18n("Disable Actions on Inactivity"), 
+	AUTOSUSPEND_MENU_ID = this->contextMenu()->insertItem( i18n("Disable Actions on Inactivity"),
 							       this,SLOT(do_setAutosuspend()));
 	this->contextMenu()->setItemVisible(AUTOSUSPEND_SEPARATOR_MENU_ID, false);
 	this->contextMenu()->setItemVisible(AUTOSUSPEND_MENU_ID, false);
@@ -220,24 +220,24 @@ void kpowersave::initMenu() {
 	HELP_SEPARATOR_MENU_ID = contextMenu()->insertSeparator();
 
 	help_menu = new QPopupMenu(this, i18n("&Help"));
-	
-	help_menu->insertItem( SmallIcon("help", QIconSet::Automatic), i18n("&KPowersave Handbook"), 
+
+	help_menu->insertItem( SmallIcon("help", QIconSet::Automatic), i18n("&KPowersave Handbook"),
 			       this, SLOT(slotHelp()));
 	help_menu->insertSeparator();
 	help_menu->insertItem( i18n("&Report a bug ..."), this, SLOT(slotReportBug()));
-	help_menu->insertItem( SmallIcon("kpowersave", QIconSet::Automatic), 
+	help_menu->insertItem( SmallIcon("kpowersave", QIconSet::Automatic),
 			       i18n("&About KPowersave"), this, SLOT(slotAbout()));
 
 	HELP_MENU = contextMenu()->insertItem(SmallIcon("help", QIconSet::Automatic),
 							i18n("&Help"), help_menu);
-	
+
 	connect(this, SIGNAL(quitSelected()), this, SLOT(_quit()));
-	
+
 	kdDebugFuncOut(trace);
 }
 
 /*!
- * This funtion load and manipulate the icons for the kickerapplet-section. 
+ * This funtion load and manipulate the icons for the kickerapplet-section.
  * The redraw interval depends on \ref icon_set_colored and \ref BAT_icon_BG_intervall.
  */
 void kpowersave::redrawPixmap(){
@@ -266,7 +266,7 @@ void kpowersave::showConfigureDialog() {
 	kdDebugFuncIn(trace);
 
 	if(!config_dialog_shown) {
-		if (settings->schemes.count() > 0){	
+		if (settings->schemes.count() > 0){
 			configDlg = new ConfigureDialog(config, hwinfo, settings);
  			configDlg->show();
 			config_dialog_shown = true;
@@ -276,14 +276,14 @@ void kpowersave::showConfigureDialog() {
 		}
 		else {
 			KPassivePopup::message(i18n("WARNING"), i18n("Cannot find any schemes."),
-					       SmallIcon("messagebox_warning", 20), this, 
+					       SmallIcon("messagebox_warning", 20), this,
 					       i18n("Warning"), 15000);
 		}
 	} else {
 		configDlg->setWindowState(configDlg->windowState() & ~WindowMinimized | WindowActive);
 		configDlg->setActiveWindow();
 	}
-	
+
 	kdDebugFuncOut(trace);
 }
 
@@ -315,7 +315,7 @@ void kpowersave::loadIcon(){
 	}
 	else if (hwinfo->getAcAdapter() || primary->getBatteryState() == BAT_NONE) {
 		icon_set_colored = false;
-		
+
 		if (primary->getBatteryState() == BAT_NONE || (primary->getRemainingPercent() < 0 ||
 		    primary->getRemainingPercent() >= 99))
 			pixmap_name_tmp = QString("laptoppower");
@@ -343,7 +343,7 @@ void kpowersave::loadIcon(){
 				icon_set_colored = false;
 				icon_BG_is_colored = false;
 		}
-		
+
 		if (icon_set_colored){
 			icon_state_changed = false;
 			BAT_WARN_ICON_Timer->start(BAT_icon_BG_intervall, true);
@@ -356,10 +356,10 @@ void kpowersave::loadIcon(){
 		if (pixmap_name.startsWith("ERROR")) {
 			pixmap = SmallIcon("laptoppower", 22, KIcon::DisabledState);
 		}
-		else 
+		else
 			pixmap = SmallIcon(pixmap_name, 22);
 	}
-	
+
 	kdDebugFuncOut(trace);
 }
 
@@ -379,20 +379,20 @@ void kpowersave::drawIcon(){
 	int w = image.width();
 	int h = image.height();
 	int x, y;
-	
-	if((pixmap_name.contains("laptopbattery") || pixmap_name.contains("charge")) && 
+
+	if((pixmap_name.contains("laptopbattery") || pixmap_name.contains("charge")) &&
 	    countWhiteIconPixel == 0) {
 		for (x = 0; x < w; x++)
 			for (y = 0; y < h; y++)
 				if(QColor(image.pixel(x, y)) == Qt::white) countWhiteIconPixel++;
 	}
-	
+
 	int c = (countWhiteIconPixel * primary->getRemainingPercent()) / 100;
-	
+
 	if (c > 0) {
 		uint ui;
 		QRgb Rgb_set;
-		
+
 		if (hwinfo->getAcAdapter()) {
 			Rgb_set = qRgb(0x00, 0xff, 0x00); //green
 		}
@@ -415,7 +415,7 @@ void kpowersave::drawIcon(){
 			image.setColor(ui, Rgb_set);
 		}
 		ui = 0xff000000 | Rgb_set;
-		
+
 		for (y = h - 1; y >= 0; y--) {
 			for (x = 0; x < w ; x++) {
 				if(QColor(image.pixel(x, y)) == Qt::white) {
@@ -436,8 +436,8 @@ quit:
 /*!
 * By this function we fill and update the Tooltip for the icon in the kicker applet.
 * The content of the tooltip alway updated, if something change.
-* \todo Check if the tooltip also updated if mouse \b is over the icon, if not we maybe 
-*	should implement this.\n If it is possible we should update the tooltip permanently 
+* \todo Check if the tooltip also updated if mouse \b is over the icon, if not we maybe
+*	should implement this.\n If it is possible we should update the tooltip permanently
 *	while the mouse cursor is over the widget
 */
 void kpowersave::updateTooltip(){
@@ -454,14 +454,14 @@ void kpowersave::updateTooltip(){
 
 	if (hwinfo->hal_terminated){
 		tmp = i18n("No information about battery and AC status available");
-	} 
+	}
 	else if (hwinfo->getAcAdapter()) {
 		if (percent == 100) tmp = i18n("Plugged in -- fully charged");
 		// assume that no battery is there
 		else {
 			if ((percent < 0 && minutes < 0) || primary->getBatteryState() == BAT_NONE) {
 				tmp = i18n("Plugged in");
-			} 
+			}
 			else if (minutes > 0){
 				if (charging_state == CHARGING)
 					tmp = i18n("Plugged in -- %1% charged (%2:%3 h until full "
@@ -488,9 +488,9 @@ void kpowersave::updateTooltip(){
 		}
 	}
 	// add string whether battery is charging, but only if < 100% to avoid
-	// stupid tooltip message on machines which always with 100% and on AC 
+	// stupid tooltip message on machines which always with 100% and on AC
 	// are charging, as e.g. Sony Vaio FS vgn-fs115b
-	if (charging_state == CHARGING && percent < 100) 
+	if (charging_state == CHARGING && percent < 100)
 		tmp += i18n(" -- battery is charging");
 
 	QToolTip::add(this, tmp);
@@ -499,16 +499,16 @@ void kpowersave::updateTooltip(){
 }
 
 /*!
- * \b SLOT to starts the Yast2-power-management module. This called by the menuentry 
+ * \b SLOT to starts the Yast2-power-management module. This called by the menuentry
  * with ID \ref YAST_MODULE_MENU_ID, named "Start YaST2 Power Management Module".
  * It create a new KProcess and execute "/sbin/yast2 power-management" with kdesu.
  */
 void kpowersave::do_config(){
 	kdDebugFuncIn(trace);
-	
+
 	#ifdef ENABLE_YAST_ENTRY
 	delete yast2;
-	
+
 	yast2 = new KProcess;
 	*yast2 << "kdesu" << "--nonewdcop" << "/sbin/yast2" << "power-management";
 
@@ -555,7 +555,7 @@ void kpowersave::slotReportBug()
  #else
 	kapp->invokeBrowser("http://en.opensuse.org/Submitting_Bug_Reports");
  #endif
-#else 
+#else
  #ifdef DISTRO_IS_ALTLINUX
 	kapp->invokeBrowser("http://bugzilla.altlinux.org/");
  #else
@@ -573,15 +573,15 @@ void kpowersave::slotReportBug()
 }
 
 /*!
- * \b SLOT to set the icon background on/off if battery is in critical, low or warning-state. Within 
- * this function we set \ref icon_state_changed to true and call \ref redrawPixmap() to redraw the 
+ * \b SLOT to set the icon background on/off if battery is in critical, low or warning-state. Within
+ * this function we set \ref icon_state_changed to true and call \ref redrawPixmap() to redraw the
  * kickerapplet icon and create a icon with blinking background. \n \n
- * The slot called by the QTimer \ref BAT_WARN_ICON_Timer . The interval of the timer is defined 
- * trough \ref BAT_icon_BG_intervall and starts here: \ref loadIcon() .  
+ * The slot called by the QTimer \ref BAT_WARN_ICON_Timer . The interval of the timer is defined
+ * trough \ref BAT_icon_BG_intervall and starts here: \ref loadIcon() .
  */
 void kpowersave::do_setIconBG(){
 	kdDebugFuncIn(trace);
-	
+
 	if (icon_set_colored) icon_state_changed = true;
 	redrawPixmap();
 
@@ -595,7 +595,7 @@ void kpowersave::do_setAutosuspend(){
 
 	if(!contextMenu()->isItemChecked(AUTOSUSPEND_MENU_ID)) {
 		autoSuspend->stop();
-		contextMenu()->setItemChecked(AUTOSUSPEND_MENU_ID, true);	
+		contextMenu()->setItemChecked(AUTOSUSPEND_MENU_ID, true);
 	}
         else {
 		if(settings->autoSuspend) {
@@ -608,30 +608,30 @@ void kpowersave::do_setAutosuspend(){
 			contextMenu()->setItemVisible(AUTOSUSPEND_SEPARATOR_MENU_ID, false);
 		}
         }
-	
+
 	kdDebugFuncOut(trace);
 }
 
 /*!
- * \b SLOT which called if the \ref configDlg is destroyed. We set within this SLOT 
+ * \b SLOT which called if the \ref configDlg is destroyed. We set within this SLOT
  * \ref config_dialog_shown to false.
  * TODO: check if we maybe should force here the current default scheme depending on the AC/battery state
  */
 void kpowersave::observeConfigDlg(){
 	kdDebugFuncIn(trace);
-	
+
 	// reload general settings
 	settings->load_general_settings();
-	// set the battery warning levels - all other general settings don't need to 
+	// set the battery warning levels - all other general settings don't need to
 	// get set, since we check the settings only on events.
-	hwinfo->setPrimaryBatteriesWarningLevel(settings->batteryWarningLevel, 
+	hwinfo->setPrimaryBatteriesWarningLevel(settings->batteryWarningLevel,
 						settings->batteryLowLevel,
 						settings->batteryCriticalLevel);
 
 	// reload the maybe changed scheme settings
 	settings->load_scheme_settings( settings->currentScheme );
 	// set the scheme
-	setSchemeSettings();	
+	setSchemeSettings();
 
 	config_dialog_shown=false;
 
@@ -651,7 +651,7 @@ void kpowersave::slotConfigProcessExited(KProcess *proc){
 			KPassivePopup::message( i18n("WARNING"),
 						i18n("Could not start YaST Power Management Module. "
 						     "Check if it is installed."),
-						SmallIcon("messagebox_warning", 20), this, 
+						SmallIcon("messagebox_warning", 20), this,
 						i18n("Warning"), 15000);
 		}
 	}
@@ -674,7 +674,7 @@ void kpowersave::slotConfigProcessExited(KProcess *proc){
  * If there is a error while "suspend to disk" the user get e messagebox.
  * This function need a running HAL daemon for "suspend to disk".
  * \return boolean with the result of the operation
- * \retval true if successful 
+ * \retval true if successful
  * \retval false if command not supported or if powersaved not running
  */
 bool kpowersave::do_suspend2disk(){
@@ -712,7 +712,7 @@ bool kpowersave::do_suspend2disk(){
 		} else {
 			KPassivePopup::message( i18n("WARNING"),
 						i18n("Suspend to disk disabled by administrator."),
-						SmallIcon("messagebox_warning", 20), 
+						SmallIcon("messagebox_warning", 20),
 						this, i18n("Warning"), 15000);
 			this->contextMenu()->setItemEnabled(SUSPEND2DISK_MENU_ID, false);
 			kdDebugFuncOut(trace);
@@ -730,7 +730,7 @@ bool kpowersave::do_suspend2disk(){
  * If there is a error while "suspend to RAM" the user get e messagebox.
  * This function need a running HAL daemon for "suspend to RAM".
  * \return boolean with the result of the operation
- * \retval true if successful 
+ * \retval true if successful
  * \retval false if command not supported or if powersaved not running
  */
 bool kpowersave::do_suspend2ram(){
@@ -768,7 +768,7 @@ bool kpowersave::do_suspend2ram(){
 		} else {
 			KPassivePopup::message( i18n("WARNING"),
 						i18n("Suspend to RAM disabled by administrator."),
-						SmallIcon("messagebox_warning", 20), this, 
+						SmallIcon("messagebox_warning", 20), this,
 						i18n("Warning"), 15000);
 			this->contextMenu()->setItemEnabled(SUSPEND2RAM_MENU_ID, false);
 			kdDebugFuncOut(trace);
@@ -786,7 +786,7 @@ bool kpowersave::do_suspend2ram(){
  * If there is a error while "stand-by" the user get e messagebox.
  * This function need a running HAL daemon for "stand-by".
  * \return boolean with the result of the operation
- * \retval true if successful 
+ * \retval true if successful
  * \retval false if command not supported or if powersaved not running
  */
 bool kpowersave::do_standby(){
@@ -823,7 +823,7 @@ bool kpowersave::do_standby(){
 			}
 		} else {
 			KPassivePopup::message( i18n("WARNING"),i18n("Standby disabled by administrator."),
-						SmallIcon("messagebox_warning", 20), this, 
+						SmallIcon("messagebox_warning", 20), this,
 						i18n("Warning"), 15000);
 			this->contextMenu()->setItemEnabled(STANDBY_MENU_ID, false);
 			kdDebugFuncOut(trace);
@@ -839,7 +839,7 @@ bool kpowersave::do_standby(){
 /*!
  * \b SLOT to send check if we should display the warning dialog and display
  * the dialog if needed or call directly autosuspend after the signal
- * \ref autosuspend::inactivityTimeExpired was recieved. 
+ * \ref autosuspend::inactivityTimeExpired was recieved.
  */
 void kpowersave::do_autosuspendWarn() {
 	kdDebugFuncIn(trace);
@@ -850,7 +850,7 @@ void kpowersave::do_autosuspendWarn() {
 			QString message;
 
 			countdown = new countDownDialog(settings->autoSuspendCountdownTimeout);
-			
+
 			if(settings->autoInactiveAction == "Suspend to Disk") {
 				countdown->setPixmap("suspend2disk");
 			} else if (settings->autoInactiveAction == "Suspend to RAM") {
@@ -860,7 +860,7 @@ void kpowersave::do_autosuspendWarn() {
 			} else {
 				countdown->setPixmap("kpowersave");
 			}
-			
+
 			// TODO: rework this after translation round for openSUSE 10.3 !
 			message = i18n("Inactivity detected.") + " " +
 				  i18n("To stop the %1 press the 'Cancel' button before the countdown "
@@ -871,7 +871,7 @@ void kpowersave::do_autosuspendWarn() {
 
 			connect(countdown, SIGNAL(dialogClosed(bool)), this, SLOT(do_autosuspend(bool)));
 			countdown->showDialog();
-		}	
+		}
 	} else {
 		// call directly autosuspend
 		do_autosuspend(false);
@@ -883,23 +883,23 @@ void kpowersave::do_autosuspendWarn() {
  * \b SLOT to send the related suspend command for autosuspend
  * \param  chancel boolean with info if the autosuspend should get chanceld
  * \return boolean with the result of the operation
- * \retval true if successful 
+ * \retval true if successful
  * \retval false if command not supported or on any other error
- * \todo	add check if the requested command is supported befor send and 
+ * \todo	add check if the requested command is supported befor send and
  *		add message for this case to tell that maybe changed config!
  */
 bool kpowersave::do_autosuspend(bool chancel) {
 	kdDebugFuncIn(trace);
-	
+
 	// TODO: check if this is really needed, it get called also on the suspend methodes
 	autoSuspend->stop();
 
-	if (!chancel) { 
+	if (!chancel) {
 		if(!settings->disableNotifications) {
-			KNotifyClient::event( this->winId(), "autosuspend_event", 
+			KNotifyClient::event( this->winId(), "autosuspend_event",
 					i18n("System is going into suspend mode now"));
 		}
-	
+
 		if(settings->autoSuspend && !contextMenu()->isItemChecked(AUTOSUSPEND_MENU_ID)) {
 			if(settings->autoInactiveAction == "Suspend to Disk") {
 				return do_suspend2disk();
@@ -922,10 +922,10 @@ bool kpowersave::do_autosuspend(bool chancel) {
 
 /*!
  * \b SLOT to dimm the display down to the configured level if the signal
- * \ref autodimm::inactivityTimeExpired was recieved. 
- * \param 
+ * \ref autodimm::inactivityTimeExpired was recieved.
+ * \param
  * \return boolean with the result of the operation
- * \retval true 	if successful 
+ * \retval true 	if successful
  * \retval false 	else
  */
 void kpowersave::do_downDimm() {
@@ -934,14 +934,14 @@ void kpowersave::do_downDimm() {
 	if (hwinfo->supportBrightness()) {
 		if (!AUTODIMM_Timer->isActive()) {
 			int dimmToLevel = (int)((float)hwinfo->getMaxBrightnessLevel()*((float)settings->autoDimmTo/100.0));
-			
-			// check if we really need to dimm down 
+
+			// check if we really need to dimm down
 			if (dimmToLevel < hwinfo->getCurrentBrightnessLevel()) {
 				int steps = hwinfo->getCurrentBrightnessLevel() - dimmToLevel;
 				int timePerStep = (1500 / steps);
 
 				autoDimmDown = true;
-	
+
 				AUTODIMM_Timer = new QTimer(this);
 				connect(AUTODIMM_Timer, SIGNAL(timeout()), this, SLOT(do_dimm()));
 				AUTODIMM_Timer->start(timePerStep, false);
@@ -959,28 +959,28 @@ void kpowersave::do_downDimm() {
 
 /*!
  * \b SLOT to dimm the display up to the configured level if the signal
- * \ref autodimm::UserIsActiveAgain was recieved. 
- * \param 
+ * \ref autodimm::UserIsActiveAgain was recieved.
+ * \param
  * \return boolean with the result of the operation
- * \retval true 	if successful 
+ * \retval true 	if successful
  * \retval false 	else
  */
 void kpowersave::do_upDimm() {
 	kdDebugFuncIn(trace);
-	
+
 	//NOTE we go back to the value of the scheme and not the last on, to reduce trouble with the scheme
 
-	if (hwinfo->supportBrightness()) {	
+	if (hwinfo->supportBrightness()) {
 		if (!AUTODIMM_Timer->isActive()) {
 			int dimmToLevel = (int)((float)hwinfo->getMaxBrightnessLevel()*((float)settings->brightnessValue/100.0));
-			
+
 			// check if we really need to dimm up
 			if (dimmToLevel > hwinfo->getCurrentBrightnessLevel()) {
 				int steps = dimmToLevel - hwinfo->getCurrentBrightnessLevel();
 				int timePerStep = (750 / steps);
 
 				autoDimmDown = false;
-	
+
 				AUTODIMM_Timer = new QTimer(this);
 				connect(AUTODIMM_Timer, SIGNAL(timeout()), this, SLOT(do_dimm()));
 				AUTODIMM_Timer->start(timePerStep, false);
@@ -1003,7 +1003,7 @@ void kpowersave::do_upDimm() {
 /*!
  * \b SLOT to dimm the display down
  * \return boolean with the result of the operation
- * \retval true 	if successful 
+ * \retval true 	if successful
  * \retval false 	else
  */
 void kpowersave::do_dimm() {
@@ -1037,7 +1037,7 @@ void kpowersave::do_dimm() {
 }
 
 /*!
- * Function handle umount/remount external storage media before/after 
+ * Function handle umount/remount external storage media before/after
  * suspend.
  * \param suspend 	boolean with info if the machine go into suspend or not
  * \return 		result of the operation
@@ -1053,7 +1053,7 @@ bool kpowersave::handleMounts( bool suspend ) {
 	if (settings->unmountExternalOnSuspend) {
 		QString _method;
 		DCOPRef dcop_ref = DCOPRef( "kded", "mediamanager" );
-		
+
 		if (suspend) {
 			_method = "unmountAllSuspend()";
 		} else {
@@ -1076,8 +1076,8 @@ bool kpowersave::handleMounts( bool suspend ) {
 		kdDebugFuncOut(trace);
 		return true;
 	}
-	
-	// this is only needed for suspend case and an error ... 
+
+	// this is only needed for suspend case and an error ...
 	// on resume a simple error msg should be enough
 	if (!_ret && suspend) {
 		// handle error case
@@ -1092,7 +1092,7 @@ bool kpowersave::handleMounts( bool suspend ) {
 		}
 
 		// ugly: need qt-tags because mediamanager can return html formated strings !!!
-		_msg = 	"<qt>" + 
+		_msg = 	"<qt>" +
 			i18n("Could not umount external media before suspend/standby. \n "
 			    "(Reason: %1)\n \n Would you like to continue suspend/standby "
 			    "anyway? \n(Warning: Continue suspend can cause data loss!)").arg(_e_msg) +
@@ -1100,9 +1100,9 @@ bool kpowersave::handleMounts( bool suspend ) {
 
 		_suspend = getSuspendString(calledSuspend);
 
-		int answer = KMessageBox::questionYesNo( 0, _msg, 
+		int answer = KMessageBox::questionYesNo( 0, _msg,
 							 i18n("Error while prepare %1").arg(_suspend),
-							 i18n("Suspend anyway"), i18n("Cancel suspend"), 
+							 i18n("Suspend anyway"), i18n("Cancel suspend"),
 							 "ignoreMountOnSuspend");
 
 		if (answer == KMessageBox::Yes) {
@@ -1126,7 +1126,7 @@ void kpowersave::handlePowerButtonEvent( ) {
 	if (calledSuspend == -1) {
 		handleActionCall(settings->powerButtonAction, settings->powerButtonActionValue);
 	}
-	
+
 	kdDebugFuncOut(trace);
 }
 
@@ -1165,23 +1165,23 @@ void kpowersave::handleS2DiskButtonEvent(){
  */
 void kpowersave::handleLidEvent( bool closed ){
 	if (trace) kdDebug() << funcinfo << "IN: " << "Lid closed? " << closed << endl;
-	
+
 	if (closed) {
-		// get new general settings! This could maybe removed if we 
+		// get new general settings! This could maybe removed if we
 		// could be shure, that the settings are actuall
 		settings->load_general_settings();
-		
+
 		// handle screen lock
 		if (settings->lidcloseAction < 0) {
 			if(settings->lockOnLidClose) {
 				if(!display->lockScreen( settings->lockmethod )) {
 					KPassivePopup::message( i18n("WARNING"),
 								i18n("Could not lock the screen. There may "
-								     "be a problem with the selected \nlock " 
+								     "be a problem with the selected \nlock "
 								     "method or something else."),
 								SmallIcon("messagebox_warning", 20), this,
 								i18n("Warning"), 10000);
-				
+
 				}
 			}
 			if(settings->forceDpmsOffOnLidClose) {
@@ -1203,12 +1203,12 @@ void kpowersave::handleLidEvent( bool closed ){
 		if(settings->forceDpmsOffOnLidClose) {
 			// reset the scheme settings to avoid problems related to call xset on lidclose
 			setSchemeSettings();
-		} 
+		}
 
 		if (settings->lockOnLidClose) {
 			activateLoginScreen();
 		}
-	
+
 		if(!settings->disableNotifications)
 			KNotifyClient::event( this->winId(), "lid_opened_event", i18n("The Lid was opened."));
 	}
@@ -1222,14 +1222,14 @@ void kpowersave::handleLidEvent( bool closed ){
 void kpowersave::activateLoginScreen(){
 	kdDebugFuncIn(trace);
 
-        // get new general settings! This could maybe removed if we 
+        // get new general settings! This could maybe removed if we
 	// could be shure, that the settings are actuall
 	settings->load_general_settings();
-	
+
 	if(settings->timeToFakeKeyAfterLock >= 0) {
 		QTimer::singleShot(settings->timeToFakeKeyAfterLock, display, SLOT(fakeShiftKeyEvent()));
 	}
-	
+
 	kdDebugFuncOut(trace);
 }
 
@@ -1246,12 +1246,12 @@ void kpowersave::setSuspendType( QString suspendtype){
 
 /*!
  * \b SLOT which called if kpowersave is exited by the user. In this case the user
- * is asked through a yes/no box if "KPowersave start automatically on log in" and the 
+ * is asked through a yes/no box if "KPowersave start automatically on log in" and the
  * result is written to the KDE configfile.
  */
 void kpowersave::_quit (){
 	kdDebugFuncIn(trace);
-	
+
 	// set the KDE-Settings back to user default
 	if(getenv("KDE_FULL_SESSION")) {
 		// first try to call the KDE method via DCOP to reset, if not fall back
@@ -1261,36 +1261,36 @@ void kpowersave::_quit (){
 			display->blankOnlyScreen(false);
 			if(!settings->kde->enabled) display->setScreenSaver(false);
 			else display->setScreenSaver(true);
-			
+
 			if(!settings->kde->displayEnergySaving) display->setDPMS(false);
 			else display->setDPMS(true);
-			
+
 			display->has_DPMS = display->setDPMSTimeouts( settings->kde->displayStandby,
 								      settings->kde->displaySuspend,
 								      settings->kde->displayPowerOff);
 		}
 	}
-	
+
 	// set, if this is a GNOME session, XScreensaver settings back to user default
 	QString session = getenv("DESKTOP_SESSION");
 	if(session.startsWith("gnome")) {
 		display->resetXScreensaver();
 	}
-	
-	if(!settings->autostartNeverAsk) { 
+
+	if(!settings->autostartNeverAsk) {
 		QString tmp1 = i18n ("Start KPowersave automatically when you log in?");
-		int tmp2 = KMessageBox::questionYesNo ( 0, tmp1, i18n("Question"), 
+		int tmp2 = KMessageBox::questionYesNo ( 0, tmp1, i18n("Question"),
 							i18n("Start Automatically"), i18n("Do Not Start"));
 		config->setGroup("General");
 		config->writeEntry ("Autostart", tmp2 == KMessageBox::Yes);
 		config->sync ();
 	}
-	
+
 	kdDebugFuncOut(trace);
 }
 
 /*!
- * \b SLOT called if the user select a 'CPU Frequency Policy' from the menu ( \ref CPUFREQ_MENU_ID ). 
+ * \b SLOT called if the user select a 'CPU Frequency Policy' from the menu ( \ref CPUFREQ_MENU_ID ).
  */
 void kpowersave::do_setSpeedPolicy(int menu_id){
 	if (trace) kdDebug() << funcinfo << "IN: " << "menu_id/set policy to: " << menu_id << endl;
@@ -1328,22 +1328,22 @@ void kpowersave::do_setActiveScheme( int i ){
 		KPassivePopup::message( i18n("WARNING"),
 					i18n("Scheme %1 could not be activated.").arg(scheme_menu->text(i)),
 					SmallIcon("messagebox_warning", 20), this, i18n("Warning"), 5000);
-	} 
+	}
 
 	kdDebugFuncOut(trace);
 }
 
 /*!
  * This function is invoked if something has to be updated. This including also menu entries.
- * If the battery is in warning state (and powersave set pdaemon->send_battery_state_change_message) 
+ * If the battery is in warning state (and powersave set pdaemon->send_battery_state_change_message)
  * the function pop-up a messagebox.
  */
 void kpowersave::update(){
 	kdDebugFuncIn(trace);
-	
+
 	int redraw_pixmap = 0;
 	QString justMins;
-	
+
 	/* need to redraw pixmap in toolbar */
 	if (hwinfo->update_info_ac_changed){
 		redraw_pixmap = 1;
@@ -1380,8 +1380,8 @@ void kpowersave::update(){
 		this->contextMenu()->setItemVisible(HELP_SEPARATOR_MENU_ID, true);
 		this->contextMenu()->setItemVisible(CONFIGURE_ID, true);
 		this->contextMenu()->setItemVisible(CONFIGURE_EVENTS_ID, true);
-		
-		if (suspend.suspend2disk && (suspend.suspend2disk_allowed || 
+
+		if (suspend.suspend2disk && (suspend.suspend2disk_allowed ||
 		    suspend.suspend2disk_allowed == -1)) {
 			this->contextMenu()->setItemEnabled(SUSPEND2DISK_MENU_ID, true);
 		} else {
@@ -1391,7 +1391,7 @@ void kpowersave::update(){
 				this->contextMenu()->setItemEnabled(SUSPEND2DISK_MENU_ID, false);
 		}
 
-		if (suspend.suspend2ram && (suspend.suspend2ram_allowed || 
+		if (suspend.suspend2ram && (suspend.suspend2ram_allowed ||
 		    suspend.suspend2ram_allowed == -1)) {
 			this->contextMenu()->setItemEnabled(SUSPEND2RAM_MENU_ID, true);
 		} else {
@@ -1404,7 +1404,7 @@ void kpowersave::update(){
 		if (suspend.standby && (suspend.standby_allowed || suspend.standby_allowed == -1)) {
 			this->contextMenu()->setItemEnabled(STANDBY_MENU_ID, true);
 		} else {
-			if (!suspend.standby)	
+			if (!suspend.standby)
 				this->contextMenu()->setItemVisible(STANDBY_MENU_ID, false);
 			else
 				this->contextMenu()->setItemEnabled(STANDBY_MENU_ID, false);
@@ -1420,11 +1420,11 @@ void kpowersave::update(){
 	if (hwinfo->update_info_primBattery_changed == true){
 		justMins.setNum(primary->getRemainingMinutes() % 60);
 		justMins = justMins.rightJustify(2, '0');
-		
+
 		redraw_pixmap = 1;
 		hwinfo->update_info_primBattery_changed = false;
 	}
-	
+
 	updateSchemeMenu();
 
 	if (redraw_pixmap){
@@ -1446,7 +1446,7 @@ void kpowersave::updateCPUFreqMenu(){
 		contextMenu()->setItemVisible(CPUFREQ_MENU_ID, true);
 		contextMenu()->setItemEnabled(CPUFREQ_MENU_ID, true);
 		contextMenu()->setItemVisible(CPUFREQ_SEPARATOR_MENU_ID, true);
-	
+
 		switch (hwinfo->getCurrentCPUFreqPolicy()){
 			case PERFORMANCE:
 				speed_menu->setItemChecked(PERFORMANCE, true);
@@ -1478,16 +1478,16 @@ void kpowersave::updateCPUFreqMenu(){
                         contextMenu()->setItemVisible(CPUFREQ_SEPARATOR_MENU_ID, false);
 		}
 	}
-	
+
 	hwinfo->update_info_cpufreq_policy_changed = false;
 
 	kdDebugFuncOut(trace);
 }
 
 /*!
- * The function used to update the scheme menu. A update is needed if 
+ * The function used to update the scheme menu. A update is needed if
  * if there is maybe new schemes or if the current scheme changed or switched
- * By this way also set the settings for screensaver and other parameter 
+ * By this way also set the settings for screensaver and other parameter
  * related to the selected scheme.
  */
 void kpowersave::updateSchemeMenu(){
@@ -1516,7 +1516,7 @@ void kpowersave::updateSchemeMenu(){
 
 	int x = 0;
 	for ( QStringList::iterator it = org_schemenames.begin(); it != org_schemenames.end(); ++it ) {
-		
+
 		QString _t = *it;
 
 		if ( *it == settings->ac_scheme ){
@@ -1529,16 +1529,16 @@ void kpowersave::updateSchemeMenu(){
 							i18n( *it ), x, x);
 			}
 			else{
-				if ((QString)*it == "Acoustic"){ 
+				if ((QString)*it == "Acoustic"){
 					scheme_menu->insertItem(SmallIcon("scheme_acoustic",
-								QIconSet::Automatic), 
+								QIconSet::Automatic),
 								i18n("Acoustic"), x, x);
 				}
 				else if ((QString)*it == "Presentation"){
 					scheme_menu->insertItem(SmallIcon("scheme_presentation",
-								QIconSet::Automatic), 
+								QIconSet::Automatic),
 								i18n("Presentation"), x, x);
-					
+
 				}
 				else if((QString)*it == "AdvancedPowersave") {
 					scheme_menu->insertItem(SmallIcon("scheme_advanced_powersave",
@@ -1556,7 +1556,7 @@ void kpowersave::updateSchemeMenu(){
 		}
 		++x;
 	}
-	
+
 	if (x == 0 && scheme_menu){
 		// this should not happen, scheme_list should have been NULL before
 		// now we'd have an empty menu ...
@@ -1571,7 +1571,7 @@ void kpowersave::updateSchemeMenu(){
 
 
 /*!
- * Reimplemented eventhandler for mouse enterEvent. This is called if the mouse cursor 
+ * Reimplemented eventhandler for mouse enterEvent. This is called if the mouse cursor
  * enters the widget. In this case if the user move the mouse cursor over the kpowersave
  * trayicon. \n \n
  * We use this event to update the Tooltip with all needed information. The time beetween
@@ -1587,7 +1587,7 @@ void kpowersave::enterEvent( QEvent */*qee*/ ){
 /*!
  * Event handler for mouse wheel events.  If the system supports changing display
  * brightness and changing brightness is enabled in the current scheme settings,
- * this will raise the brightness by one level for wheel up events and lower the 
+ * this will raise the brightness by one level for wheel up events and lower the
  * brightness by one level for wheel down events.
  */
 void kpowersave::wheelEvent (QWheelEvent *qwe)
@@ -1609,10 +1609,10 @@ void kpowersave::wheelEvent (QWheelEvent *qwe)
 }
 
 /*!
- * Reimplemented eventhandler for mousePressEvents which is involved if the user click 
- * on the icon on the kickerapplet. This was written to guarantee that a click with the 
- * right and the left mousebutton activate the menu. In the future this can also used 
- * to popup maybe a other menu. 
+ * Reimplemented eventhandler for mousePressEvents which is involved if the user click
+ * on the icon on the kickerapplet. This was written to guarantee that a click with the
+ * right and the left mousebutton activate the menu. In the future this can also used
+ * to popup maybe a other menu.
  */
 void kpowersave::mousePressEvent(QMouseEvent *qme){
 	kdDebugFuncIn(trace);
@@ -1620,7 +1620,7 @@ void kpowersave::mousePressEvent(QMouseEvent *qme){
 	KSystemTray::mousePressEvent(qme);
 	if (hwinfo->isOnline()) {
 		if (qme->button() == RightButton){
-			// TODO check if  maybe some rechecks needed 
+			// TODO check if  maybe some rechecks needed
 			this->contextMenu()->exec(QCursor::pos());
 		} else if (qme->button() == LeftButton) {
 			showDetailedDialog();
@@ -1631,7 +1631,7 @@ void kpowersave::mousePressEvent(QMouseEvent *qme){
 }
 
 /*!
- * \b SLOT called if the detaileddialog is closed. With this we prevent open 
+ * \b SLOT called if the detaileddialog is closed. With this we prevent open
  * the dialog twice, use this function to reset the used variables.
  */
 void kpowersave::closedetaileddialog() {
@@ -1639,7 +1639,7 @@ void kpowersave::closedetaileddialog() {
 }
 
 /*!
- * \b SLOT used to display error messages related to D-Bus in kpowersave. This function 
+ * \b SLOT used to display error messages related to D-Bus in kpowersave. This function
  * block all messeges which we have in kpowersave!
  * TODO: do something usefull
  */
@@ -1649,7 +1649,7 @@ void kpowersave::showDBusErrorMsg( int type ){
 	static bool displayed = false;
 
 	QString msg;
-	QString dlg_name; 
+	QString dlg_name;
 
 	switch (type) {
 		case DBUS_RUNNING:
@@ -1663,10 +1663,10 @@ void kpowersave::showDBusErrorMsg( int type ){
 		default:
 			kdDebugFuncOut(trace);
 			return;
-	} 
+	}
 
 	if (!displayed && !dlg_name.isEmpty()) {
-		infoDialog *dlg = new infoDialog( config, i18n("Warning"), msg, 
+		infoDialog *dlg = new infoDialog( config, i18n("Warning"), msg,
 					 i18n("Don't show this message again."), dlg_name);
 
 		if (!dlg->dialogIsDisabled()) {
@@ -1679,8 +1679,8 @@ void kpowersave::showDBusErrorMsg( int type ){
 	kdDebugFuncOut(trace);
 }
 
-/*! 
- * \b SLOT to display the HAL error message. We use this 
+/*!
+ * \b SLOT to display the HAL error message. We use this
  * function to delay the message, and prevent display them is HAL or
  * powersaved restarted.
  */
@@ -1696,7 +1696,7 @@ void kpowersave::showHalErrorMsg() {
 			KPassivePopup::message( i18n("ERROR"),
 						i18n("Could not get information from HAL. The haldaemon is "
 						     "maybe not running."),
-						SmallIcon("messagebox_warning", 20), this, 
+						SmallIcon("messagebox_warning", 20), this,
 						i18n("Error"), 5000);
 		}
 		else if (hwinfo->hal_terminated && !hal_error_shown && !DISPLAY_HAL_ERROR_Timer->isActive()) {
@@ -1738,7 +1738,7 @@ void kpowersave::showErrorMessage( QString msg ){
 
 
 /*!
- * Use this function to set the SchemeSettings. This function currently set the 
+ * Use this function to set the SchemeSettings. This function currently set the
  * e.g. the screensaver and dpms settings. Don't forget to call this function if
  * a scheme is changed or if the settings changed.
  */
@@ -1761,7 +1761,7 @@ void kpowersave::setSchemeSettings(){
 		else
 			hwinfo->setPowerSave(true);
 	}
-	
+
 	// --> set autosuspend settings
 	if(settings->autoSuspend) {
 		setAutoSuspend(false);
@@ -1789,7 +1789,7 @@ void kpowersave::setSchemeSettings(){
 				display->blankOnlyScreen(false);
 			}
 		}
-		
+
 	} // TODO: check if this really work !!!
 	else if(getenv("KDE_FULL_SESSION")) {
 		// try to reset the complete screensaver settings. Ff this fail, use own methodes
@@ -1806,14 +1806,14 @@ void kpowersave::setSchemeSettings(){
 				display->setScreenSaver(true);
 				// What should we do with settings->kde->lock ?
 				// Maybe nothing ?!
-			}	
+			}
 		}
 	} else if ((getenv("DESKTOP_SESSION") != NULL) && !strcmp(getenv("DESKTOP_SESSION"), "gnome")) {
 		// use this to set XScreensaver back to default settings this should
 		// also cover the DPMS settings for GNOME/XScreensaver
 		display->resetXScreensaver();
 	}
-	
+
 	// --> set DPMS settings
 	if(settings->specPMSettings){
 		// set the new DPMS settings
@@ -1828,7 +1828,7 @@ void kpowersave::setSchemeSettings(){
 		}
 	}
 	else  if(getenv("KDE_FULL_SESSION")){
-		// try to reset the KDE screensaver/DPMS settings (if there are also 
+		// try to reset the KDE screensaver/DPMS settings (if there are also
 		// no special screensaver settings) otherwise fall back and set values from files
 		if (!settings->specSsSettings && !display->resetKDEScreensaver()) {
 			settings->load_kde();
@@ -1844,7 +1844,7 @@ void kpowersave::setSchemeSettings(){
 			}
 		}
 	}
-	
+
 	// --> set brightness settings
 	if(settings->brightness && hwinfo->supportBrightness()) {
 		// set to given values
@@ -1861,7 +1861,7 @@ void kpowersave::setSchemeSettings(){
 
 /*!
  * \b SLOT which called to set and start the autosuspend monitoring.
- * \param resumed boolean value which represent information if machine 
+ * \param resumed boolean value which represent information if machine
  *		  currently back from suspend/standby
  */
 void kpowersave::setAutoSuspend( bool resumed ){
@@ -1878,10 +1878,10 @@ void kpowersave::setAutoSuspend( bool resumed ){
 			autoSuspend->stop();
 			delete autoSuspend;
 			autoSuspend = new autosuspend();
-			connect(autoSuspend, SIGNAL(inactivityTimeExpired()), this, 
+			connect(autoSuspend, SIGNAL(inactivityTimeExpired()), this,
 				SLOT(do_autosuspendWarn()));
 		}
-		
+
 		if (settings->autoSuspendCountdown && (settings->autoSuspendCountdownTimeout > 0)) {
 			autoInactiveActionAfter = ((settings->autoInactiveActionAfter * 60) -
 						    settings->autoSuspendCountdownTimeout);
@@ -1913,13 +1913,13 @@ void kpowersave::setAutoSuspend( bool resumed ){
 
 /*!
  * \b SLOT which called to set and start the autodimm monitoring.
- * \param resumed boolean value which represent information if machine 
+ * \param resumed boolean value which represent information if machine
  *		  currently back from suspend/standby
  */
 void kpowersave::setAutoDimm( bool resumed ){
 	if (trace) kdDebug() << funcinfo << "IN: " << "resumed? " << resumed << endl;
 
-	if(settings->autoDimmAfter > 0 && settings->autoDimm) { 
+	if(settings->autoDimmAfter > 0 && settings->autoDimm) {
 		if(settings->autoDimmTo < 0) {
 			autoDimm->stop();
 			kdWarning() << "Not allowed or set level for dimm" << endl;
@@ -1942,7 +1942,7 @@ void kpowersave::setAutoDimm( bool resumed ){
 	} else {
 		if (autoDimm)
 			autoDimm->stop();
-	}	
+	}
 
 	kdDebugFuncOut(trace);
 }
@@ -1950,7 +1950,7 @@ void kpowersave::setAutoDimm( bool resumed ){
 // -------- start KNotify functions ------------- //
 
 /*!
- * \b SLOT called if a battery warning state reached and related signal recieved. 
+ * \b SLOT called if a battery warning state reached and related signal recieved.
  * Here we emit the related KNotify event, if not disabled.
  * \param type  integer with  the type of the battery
  * \param state integer represent the reached battery state
@@ -2006,7 +2006,7 @@ void kpowersave::notifyBatteryStatusChange ( int type, int state ) {
 								  "cable immediately. Otherwise the machine\n"
 								  "will go shutdown in 30 seconds")
 								.arg(min/ 60).arg(min%60));
-				
+
 				QTimer::singleShot(30000, this, SLOT(handleCriticalBatteryActionCall()));
 			} else {
 				if (!settings->disableNotifications)
@@ -2023,7 +2023,7 @@ void kpowersave::notifyBatteryStatusChange ( int type, int state ) {
 			break;
 		default:
 			break;
-		} 
+		}
 	} else {
 		// TODO: add some code later for the other batteries
 	}
@@ -2034,7 +2034,7 @@ void kpowersave::notifyBatteryStatusChange ( int type, int state ) {
 
 /*!
  * Function to call the action for battery critical event. This is ugly, but
- * because of QTimer::singleShot() can't take param ... 
+ * because of QTimer::singleShot() can't take param ...
  * NOTE: Use this only for SHUTDOWN atm
  */
 void kpowersave::handleCriticalBatteryActionCall () {
@@ -2052,7 +2052,7 @@ void kpowersave::handleCriticalBatteryActionCall () {
  * \param checkAC	bool if there should be a check for AC state befor call the action
  */
 void kpowersave::handleActionCall ( action action, int value , bool checkAC, bool batWarnCall ) {
-	if (trace) kdDebug() << funcinfo << "IN: " << "action: " << action << "value: " << value 
+	if (trace) kdDebug() << funcinfo << "IN: " << "action: " << action << "value: " << value
 						   << "checkAC: " << checkAC << endl;
 
 	if (hwinfo->currentSessionIsActive()) {
@@ -2136,17 +2136,17 @@ void kpowersave::handleACStatusChange ( bool acstate , bool notifyEvent ) {
 				KNotifyClient::event(this->winId(), "unplug_event", i18n("AC adapter unplugged"));
 			}
 		}
-	
+
 		// handle switch to AC/battery default scheme
 		if (acstate) {
 			index = settings->schemes.findIndex(settings->ac_scheme);
 		} else {
 			index = settings->schemes.findIndex(settings->battery_scheme);
 		}
-	
+
 		if (index != -1)
 			do_setActiveScheme(index);
-	
+
 		// update applet
 		update();
 	}
@@ -2171,7 +2171,7 @@ void kpowersave::notifySchemeSwitch() {
 		else
 			eventType = "scheme_" + _scheme;
 
-		KNotifyClient::event( this->winId(), eventType, 
+		KNotifyClient::event( this->winId(), eventType,
 				      i18n("Switched to scheme: %1").arg(i18n(_scheme)));
 	}
 
@@ -2188,17 +2188,17 @@ void kpowersave::notifySuspend( int suspendType ) {
 	if(!settings->disableNotifications) {
 		switch (suspendType) {
 			case SUSPEND2DISK:
-				KNotifyClient::event( this->winId(), "suspend2disk_event", 
+				KNotifyClient::event( this->winId(), "suspend2disk_event",
 						      i18n("System is going into %1 now.").
 						      arg(i18n("Suspend to Disk")));
 				break;
 			case SUSPEND2RAM:
-				KNotifyClient::event( this->winId(), "suspend2ram_event", 
+				KNotifyClient::event( this->winId(), "suspend2ram_event",
 						      i18n("System is going into %1 now.").
 						      arg(i18n("Suspend to RAM")));
 				break;
 			case STANDBY:
-				KNotifyClient::event( this->winId(), "standby_event", 
+				KNotifyClient::event( this->winId(), "standby_event",
 						      i18n("System is going into %1 now.").
 						      arg(i18n("Standby")));
 				break;
@@ -2216,7 +2216,7 @@ void kpowersave::notifySuspend( int suspendType ) {
  */
 void kpowersave::forwardResumeSignal( int result ) {
 	if (trace) kdDebug() << funcinfo << "IN: " << "result: " << result << endl;
-	
+
 	resume_result = result;
 
 	QTimer::singleShot(100, this, SLOT(handleResumeSignal()));
@@ -2235,7 +2235,7 @@ void kpowersave::handleResumeSignal() {
 	if(settings->lockOnSuspend) {
 		activateLoginScreen();
 	}
-	
+
 	// reset autosuspend and autodimm
 	setAutoSuspend(true);
 	setAutoDimm(true);
@@ -2248,38 +2248,39 @@ void kpowersave::handleResumeSignal() {
 	if(!settings->disableNotifications) {
 		switch (calledSuspend) {
 			case SUSPEND2DISK:
-				KNotifyClient::event( this->winId(), "resume_from_suspend2disk_event", 
+				KNotifyClient::event( this->winId(), "resume_from_suspend2disk_event",
 						      i18n("System is resumed from %1.").arg(
 						      i18n("Suspend to Disk")));
 				break;
 			case SUSPEND2RAM:
-				KNotifyClient::event( this->winId(), "resume_from_suspend2ram_event", 
+				KNotifyClient::event( this->winId(), "resume_from_suspend2ram_event",
 					      	      i18n("System is resumed from %1.").arg(
 						      i18n("Suspend to RAM")));
 				break;
 			case STANDBY:
-				KNotifyClient::event( this->winId(), "resume_from_standby_event", 
+				KNotifyClient::event( this->winId(), "resume_from_standby_event",
 						      i18n("System is resumed from %1.").arg(
 						      i18n("Standby")));
 				break;
 			default:
 				kdError() << "called suspend type unknown" << endl;
 				break;
-		
+
 		}
 	}
 
 	// handle result of the resume/suspend
-	if (resume_result == 0 || resume_result == INT_MAX) {
+	// 1 is a valid return code; don't error out when it is received!
+	if ((resume_result == 0) || (resume_result == 1) || (resume_result == INT_MAX)) {
 		if ( resume_result == INT_MAX )
 			kdWarning() << "Unknown if we successful resumed, look like a D-Bus timeout since "
 				    << "elapsed time between suspend and resume is higher than 6 hours" << endl;
 
 		// successful resumed ... remount only in this case
 		if (!handleMounts(false)) {
-			KPassivePopup::message( i18n("WARNING"), 
+			KPassivePopup::message( i18n("WARNING"),
 						i18n("Could not remount (all) external storage"
-						" media."), SmallIcon("messagebox_warning", 20), 
+						" media."), SmallIcon("messagebox_warning", 20),
 						this, i18n("Warning"), 15000);
 		}
 	} else {
@@ -2311,7 +2312,7 @@ void kpowersave::handleResumeSignal() {
 					break;
 				default:
 					break;
-			} 
+			}
  #else
 			logview = new LogViewer ("/var/log/pm-suspend.log");
 			logview->show();
@@ -2331,7 +2332,7 @@ void kpowersave::handleResumeSignal() {
 /*!
  * \b SLOT called if the state of the current session change
  * \param state boolean represent the state of the session
- * TODO: fix scheme handling 
+ * TODO: fix scheme handling
  * TODO: fix critical battery situations (see the todo file in the source)
  */
 void kpowersave::handleSessionState (bool state) {
@@ -2341,15 +2342,15 @@ void kpowersave::handleSessionState (bool state) {
 		// session is active again
 		if (settings->autoSuspend) disableAutosuspend(false);
 		if (settings->autoDimm) setAutoDimm(false);
-		/* handle may missed/not set AC status changes while the 
+		/* handle may missed/not set AC status changes while the
 		   session was inactive and set them to the default schemes ?! */
 		handleACStatusChange(hwinfo->getAcAdapter(), false);
-		
+
 	} else {
 		// session is now inactive
 		if (settings->autoSuspend) disableAutosuspend(true);
 		if (settings->autoDimm) autoDimm->stop();
-	}	
+	}
 
 	kdDebugFuncOut(trace);
 }
@@ -2393,9 +2394,9 @@ QString kpowersave::getSuspendString (int type) {
  */
 bool kpowersave::lockScreen(){
 	kdDebugFuncIn(trace);
-	
+
 	settings->load_general_settings();
-	
+
 	return display->lockScreen( settings->lockmethod );
 
 	kdDebugFuncOut(trace);
@@ -2407,7 +2408,7 @@ bool kpowersave::lockScreen(){
  */
 QString kpowersave::currentScheme (){
 	kdDebugFuncIn(trace);
-	
+
 	if(hwinfo->isOnline()) {
 		return settings->currentScheme;
 	} else {
@@ -2444,12 +2445,12 @@ QString kpowersave::currentCPUFreqPolicy() {
 	} else {
 		return "ERROR: HAL or/and DBus not running";
 	}
-	
+
 	kdDebugFuncOut(trace);
 }
 
 /*!
- * DCOP Interface funtion to send a list with the allowed  
+ * DCOP Interface funtion to send a list with the allowed
  * CPU Frequency states.
  * \return QStringList with the supported CPUFreq states
  */
@@ -2475,13 +2476,13 @@ QStringList kpowersave::listCPUFreqPolicies() {
  * \param policy QString with the policy to set, only values from
  * 		 list_CPUFreqPolicies are allowed (except "NOT SUPPORTED")
  * \return boolean with the result of set the requested CPUFreq policy
- * \retval true if successful set 
+ * \retval true if successful set
  * \retval false if not supported or any other failure
  */
 bool kpowersave::do_setCPUFreqPolicy( QString policy ) {
 	if (trace) kdDebug() << funcinfo << "IN: " << "policy: " << policy << endl;
 
-	
+
 	bool ret = true;
 	/*
 	if (hwinfo->isCpuFreqAllowed() && hwinfo->isOnline()) {
@@ -2504,26 +2505,26 @@ bool kpowersave::do_setCPUFreqPolicy( QString policy ) {
 }
 
 /*!
- * DCOP Interface funtion to send a list with the supported and enabled 
+ * DCOP Interface funtion to send a list with the supported and enabled
  * sleeping states.
  * \return QStringList with the supported spleeping states
  */
 QStringList kpowersave::allowed_sleepingStates(){
 	kdDebugFuncIn(trace);
-	
-	QStringList sleepList;	
+
+	QStringList sleepList;
 	if(hwinfo->isOnline()) {
-		if (suspend.suspend2disk && (suspend.suspend2disk_allowed || 
-		    suspend.suspend2disk_allowed == -1)){ 
+		if (suspend.suspend2disk && (suspend.suspend2disk_allowed ||
+		    suspend.suspend2disk_allowed == -1)){
 			sleepList.append("suspendToDisk");
 		}
-		if (suspend.suspend2ram && (suspend.suspend2ram_allowed || 
-		    suspend.suspend2ram_allowed == -1)){ 
+		if (suspend.suspend2ram && (suspend.suspend2ram_allowed ||
+		    suspend.suspend2ram_allowed == -1)){
 			sleepList.append("suspendToRAM");
 		}
-		if (suspend.standby && (suspend.standby_allowed || suspend.standby_allowed == -1)){ 
+		if (suspend.standby && (suspend.standby_allowed || suspend.standby_allowed == -1)){
 			sleepList.append("standBy");
-		}	
+		}
 		if(sleepList.isEmpty()){
 			sleepList.append("NO_SLEEPING_STATES_SUPPORTED");
 		}
@@ -2531,7 +2532,7 @@ QStringList kpowersave::allowed_sleepingStates(){
 	else {
 		sleepList.append("ERROR: D-Bus and/or HAL not running");
 	}
-	
+
 	kdDebugFuncOut(trace);
 	return sleepList;
 }
@@ -2543,7 +2544,7 @@ QStringList kpowersave::allowed_sleepingStates(){
 QStringList kpowersave::listSchemes(){
 	kdDebugFuncIn(trace);
 
-	QStringList _schemeList;	
+	QStringList _schemeList;
 	if(hwinfo->isOnline()) {
 		if (settings->schemes.count() > 0){
 			_schemeList = settings->schemes;
@@ -2563,7 +2564,7 @@ QStringList kpowersave::listSchemes(){
  * \return boolean with the result of set the requested scheme
  * \retval false if failed (e.g. scheme is not in the list)
  * \retval true if scheme found and set
- * \param _scheme QString with the scheme to set, scheme should be 
+ * \param _scheme QString with the scheme to set, scheme should be
  *		  named as list from list_schemes()
  */
 bool kpowersave::do_setScheme( QString /*_scheme*/ ) {
@@ -2625,13 +2626,13 @@ bool kpowersave::do_standBy(){
 //! dcop function to set the brightness up
 bool kpowersave::do_brightnessUp(int percentageStep) {
 	kdDebugFuncIn(trace);
-	
+
 	bool retval = false;
-	
+
 	if(hwinfo->isOnline()) {
 		retval = hwinfo->setBrightnessUp(percentageStep);
-	} 
-	
+	}
+
 	kdDebugFuncOut(trace);
 	return retval;
 }
@@ -2639,20 +2640,20 @@ bool kpowersave::do_brightnessUp(int percentageStep) {
 //! dcop function to set the brightness down
 bool kpowersave::do_brightnessDown(int percentageStep) {
 	kdDebugFuncIn(trace);
-	
+
 	bool retval = false;
-	
+
 	if(hwinfo->isOnline()) {
 		retval = hwinfo->setBrightnessDown(percentageStep);
-	} 
-	
+	}
+
 	kdDebugFuncOut(trace);
 	return retval;
 }
 
 
 /*!
- * DCOP Interface funtion to stop/start the Autosuspend 
+ * DCOP Interface funtion to stop/start the Autosuspend
  * \param disable boolean which tell if the autosuspend should be stopped (true)
  *		   or started (false).
  */
@@ -2694,7 +2695,7 @@ void kpowersave::showDetailedDialog( ){
 		detailedDlg->show();
 		detailedIsShown = true;
 	}
-	
+
 	connect(detailedDlg, SIGNAL(destroyed()), this, SLOT(closedetaileddialog()));
 
 	kdDebugFuncOut(trace);
@@ -2704,11 +2705,11 @@ void kpowersave::showDetailedDialog( ){
  * DCOP Interface funtion to open the configure dialog.
  * \return boolean with the result of open the dialog
  * \retval false if failed (e.g. D-Bus or HAL is not running)
- * \retval true if correct opend 
+ * \retval true if correct opend
  */
 bool kpowersave::openConfigureDialog (){
 	kdDebugFuncIn(trace);
-	
+
 	if(hwinfo->isOnline()) {
 		showConfigureDialog();
 		kdDebugFuncOut(trace);
@@ -2730,7 +2731,7 @@ bool kpowersave::currentSchemeManagesDPMS () {
 	kdDebugFuncIn(trace);
 
 	return settings->specPMSettings;
-	
+
 	kdDebugFuncOut(trace);
 }
 
@@ -2746,7 +2747,7 @@ int kpowersave::brightnessGet() {
 	}
 
 	kdDebugFuncOut(trace);
-	
+
 	return retval;
 }