Use new TQ_METHOD, TQ_SIGNAL, TQ_SLOT defines

Signed-off-by: Michele Calgaro <michele.calgaro@yahoo.it>

15 files changed, 226 insertions, 226 deletions

diff --git a/src/autodimm.cpp b/src/autodimm.cpp
index 6ecea42..5eb6f24 100644
--- a/src/autodimm.cpp
+++ b/src/autodimm.cpp
@@ -37,7 +37,7 @@ autodimm::autodimm(screen *disp) : inactivity(disp) {
 	lastIdleTime = 0;
 	
 	checkActivity = new TQTimer( this );
-	connect( checkActivity, TQT_SIGNAL(timeout()), this, TQT_SLOT(pollActivity()));
+	connect( checkActivity, TQ_SIGNAL(timeout()), this, TQ_SLOT(pollActivity()));
 
 	kdDebugFuncOut(trace);
 }
@@ -65,7 +65,7 @@ void autodimm::startCheckForActivity() {
 }
 
 /*!
- * \b TQT_SLOT to call check if the user is active again.
+ * \b Slot to call check if the user is active again.
  */
 void autodimm::pollActivity() {
 	kdDebugFuncIn(trace);
diff --git a/src/blacklisteditdialog.cpp b/src/blacklisteditdialog.cpp
index 475670a..9b50929 100644
--- a/src/blacklisteditdialog.cpp
+++ b/src/blacklisteditdialog.cpp
@@ -80,7 +80,7 @@ blacklistEditDialog::~blacklistEditDialog()
 }
 
 /*!
- * SLOT: called if the 'ok' button clicked. This TQT_SLOT emit
+ * Slot called if the 'ok' button clicked. This slot emit
  * \ref config_finished() and close the dialog.
  */
 void blacklistEditDialog::buttonOk_released() {
@@ -94,7 +94,7 @@ void blacklistEditDialog::buttonOk_released() {
 
 
 /*!
- * SLOT: called if the 'cancel' button clicked. This TQT_SLOT close
+ * Slot called if the 'cancel' button clicked. This slot close
  * the dialog.
  */
 void blacklistEditDialog::buttonCancel_released(){
@@ -104,7 +104,7 @@ void blacklistEditDialog::buttonCancel_released(){
 
 
 /*!
- * SLOT: called if the 'remove' button clicked. The TQT_SLOT try to remove
+ * Slot called if the 'remove' button clicked. The slot try to remove
  * the selected item from the TQListBox and the TQStringList \ref blacklist .
  */
 void blacklistEditDialog::pB_remove_released(){
@@ -124,8 +124,8 @@ void blacklistEditDialog::pB_remove_released(){
 
 
 /*!
- * SLOT: called if the 'add' button clicked. The TQT_SLOT try to add the string from 
- * the TQLineEdit lE_blacklist to the TQListBox and the TQStringList \ref blacklist .
+ * Slot called if the 'add' button clicked. The slot try to add the string from
+ * the TQLineEdit lE_blacklist to the TQListBox and the TQStringList \ref blacklist.
  */
 void blacklistEditDialog::pB_add_released(){
 	
@@ -155,7 +155,7 @@ void blacklistEditDialog::pB_add_released(){
 
 
 /*!
- * SLOT: called if a item in the TQListBox lB_blacklist is selected.
+ * Slot called if a item in the TQListBox lB_blacklist is selected.
  * Here we enable the remove button  pB_remove .
  */
 void blacklistEditDialog::lB_blacklist_currentChanged(){
@@ -165,7 +165,7 @@ void blacklistEditDialog::lB_blacklist_currentChanged(){
 
 
 /*!
- * SLOT: called if the input-line in the dialog is modified. Here we enable
+ * Slot called if the input-line in the dialog is modified. Here we enable
  * the add button pB_add .
  */
 void blacklistEditDialog::lE_blacklist_textChanged(){
diff --git a/src/configuredialog.cpp b/src/configuredialog.cpp
index d453ce6..73392be 100644
--- a/src/configuredialog.cpp
+++ b/src/configuredialog.cpp
@@ -905,7 +905,7 @@ void ConfigureDialog::saveGeneralSettings() {
 /* ---- START monitor changes SECTION ---- */
 
 /*!
- * SLOT: Called if a value within the Tab 'General Settings' is changed.
+ * Slot called if a value within the Tab 'General Settings' is changed.
  */
 void ConfigureDialog::general_valueChanged(){
 	kdDebugFuncIn(trace);
@@ -928,7 +928,7 @@ void ConfigureDialog::general_valueChanged(){
 }
 
 /*!
- * SLOT: Called if a value within the Tab 'Scheme Settings' is changed.
+ * Slot called if a value within the Tab 'Scheme Settings' is changed.
  */
 void ConfigureDialog::scheme_valueChanged(){
 	kdDebugFuncIn(trace);
@@ -942,7 +942,7 @@ void ConfigureDialog::scheme_valueChanged(){
 }
 
 /*!
- * SLOT: called if the current scheme in the TQListBox listBox_schemes is
+ * Slot called if the current scheme in the TQListBox listBox_schemes is
  * changed/ a other scheme was selected.
  */
 void ConfigureDialog::listBox_schemes_currentChanged(){
@@ -977,7 +977,7 @@ void ConfigureDialog::listBox_schemes_currentChanged(){
 /* ---- START BUTTON SECTION ---- */
 
 /*!
- * SLOT: called if the 'Apply' button is clicked.
+ * Slot called if the 'Apply' button is clicked.
  */
 void ConfigureDialog::buttonApply_clicked(){
 	kdDebugFuncIn(trace);
@@ -995,7 +995,7 @@ void ConfigureDialog::buttonApply_clicked(){
 }
 
 /*!
- * SLOT: called if the 'Cancel' button is clicked.
+ * Slot called if the 'Cancel' button is clicked.
  */
 void ConfigureDialog::buttonCancel_clicked(){
 	kdDebugFuncOut(trace);
@@ -1017,7 +1017,7 @@ void ConfigureDialog::buttonCancel_clicked(){
 }
 
 /*!
- * SLOT: called if the 'OK' button is clicked.
+ * Slot called if the 'OK' button is clicked.
  */
 void ConfigureDialog::buttonOk_clicked(){
 	kdDebugFuncIn(trace);
@@ -1030,7 +1030,7 @@ void ConfigureDialog::buttonOk_clicked(){
 }
 
 /*!
- * SLOT: called if the 'Help' button is clicked.
+ * Slot called if the 'Help' button is clicked.
  */
 void ConfigureDialog::buttonHelp_clicked(){
 	kdDebugFuncIn(trace);
@@ -1045,7 +1045,7 @@ void ConfigureDialog::buttonHelp_clicked(){
 /* ---- START SCHEME ADD/DELETE SECTION ---- */
 
 /*!
- * SLOT: called if the 'New' scheme button is clicked.
+ * Slot called if the 'New' scheme button is clicked.
  */
 void ConfigureDialog::pB_newScheme_clicked(){
 	kdDebugFuncIn(trace);
@@ -1091,7 +1091,7 @@ void ConfigureDialog::pB_newScheme_clicked(){
 }
 
 /*!
- * SLOT: called if the 'Delete' scheme button is clicked.
+ * Slot called if the 'Delete' scheme button is clicked.
  */
 void ConfigureDialog::pB_deleteScheme_clicked(){
 	kdDebugFuncIn(trace);
@@ -1129,7 +1129,7 @@ void ConfigureDialog::pB_deleteScheme_clicked(){
 /* ---- START SCREENSAVER SECTION ---- */
 
 /*!
- * SLOT: called if TQCheckBox cB_specificSettings is toggled.
+ * Slot called if TQCheckBox cB_specificSettings is toggled.
  * \param state boolean, true if toggled on
  *		   	 false if toggled off
  */
@@ -1157,7 +1157,7 @@ void ConfigureDialog::cB_specificSettings_toggled(bool state){
 }
 
 /*!
- * SLOT: called if TQCheckBox cB_disable_Ss is toggled.
+ * Slot called if TQCheckBox cB_disable_Ss is toggled.
  * \param state boolean, true if toggled on
  *		   	 false if toggled off
  */
@@ -1177,7 +1177,7 @@ void ConfigureDialog::cB_disable_Ss_toggled(bool state){
 /* ---- START DPMS SECTION ---- */
 
 /*!
- * SLOT: called if TQCheckBox cB_SpecificPM is toggled.
+ * Slot called if TQCheckBox cB_SpecificPM is toggled.
  * \param state boolean, true if toggled on
  *		   	 false if toggled offtrue
  */
@@ -1202,7 +1202,7 @@ void ConfigureDialog::cB_SpecificPM_toggled(bool state){
 }
 
 /*!
- * SLOT: called if TQCheckBox cB_disablePM is toggled.
+ * Slot called if TQCheckBox cB_disablePM is toggled.
  * \param state boolean, true if toggled on
  *			 false if toggled off
  */
@@ -1223,7 +1223,7 @@ void ConfigureDialog::cB_disablePM_toggled(bool state){
 }
 
 /*!
- * SLOT: called if the standby TQSpinBoxes for DPMS timout is changed.
+ * Slot called if the standby TQSpinBoxes for DPMS timout is changed.
  */
 void ConfigureDialog::sB_standby_valueChanged() {
 	kdDebugFuncIn(trace);
@@ -1240,7 +1240,7 @@ void ConfigureDialog::sB_standby_valueChanged() {
 }
 
 /*!
- * SLOT: called if the suspend TQSpinBoxes for DPMS timout is changed.
+ * Slot called if the suspend TQSpinBoxes for DPMS timout is changed.
  */
 void ConfigureDialog::sB_suspend_valueChanged() {
 	kdDebugFuncIn(trace);
@@ -1261,7 +1261,7 @@ void ConfigureDialog::sB_suspend_valueChanged() {
 }
 
 /*!
- * SLOT: called if the powerOff TQSpinBoxes for DPMS timout is changed.
+ * Slot called if the powerOff TQSpinBoxes for DPMS timout is changed.
  */
 void ConfigureDialog::sB_powerOff_valueChanged() {
 	kdDebugFuncIn(trace);
@@ -1337,7 +1337,7 @@ void ConfigureDialog::cB_autoSuspend_toggled( bool toggled ) {
 }
 
 /*!
- * SLOT: called if a new item in cB_autoInactivity is selected.
+ * Slot called if a new item in cB_autoInactivity is selected.
  * \param selectedItem Integer, contains the ID of the new item in the
  *				comboBox.
  */
@@ -1388,7 +1388,7 @@ void ConfigureDialog::cB_autoInactivity_activated( int selectedItem ) {
 }
 
 /*!
- * SLOT: Called if the 'Enable scheme specific blacklist' is toggled.
+ * Slot called if the 'Enable scheme specific blacklist' is toggled.
  * \param toggled boolean, true if toggled on
  *			   false if toggled off
  */
@@ -1408,7 +1408,7 @@ void ConfigureDialog::cB_Blacklist_toggled( bool toggled ){
 }
 
 /*!
- * SLOT: Called if the 'edit blacklist' button is toggled.
+ * Slot called if the 'edit blacklist' button is toggled.
  */
 void ConfigureDialog::pB_editBlacklistSuspend_clicked(){
 	kdDebugFuncIn(trace);
@@ -1445,15 +1445,15 @@ void ConfigureDialog::pB_editBlacklistSuspend_clicked(){
 	}
 	blacklistEDlgAS = new blacklistEditDialog(blacklist, _top_text, initialiseImport, this);
 
-	connect( blacklistEDlgAS, TQT_SIGNAL(config_finished(TQStringList)), this,
-		 TQT_SLOT(saveSchemeSuspendBlacklist(TQStringList)));
+	connect( blacklistEDlgAS, TQ_SIGNAL(config_finished(TQStringList)), this,
+		 TQ_SLOT(saveSchemeSuspendBlacklist(TQStringList)));
 	blacklistEDlgAS->exec();
 
 	kdDebugFuncOut(trace);
 }
 
 /*!
- * SLOT: Called if the signal config_finished(TQStringList) recieved
+ * Slot called if the signal config_finished(TQStringList) recieved
  * and the autosuspend blacklist is edited.
  * \param new_blacklist TQStringlist with the edited blacklisted processes
  */
@@ -1518,7 +1518,7 @@ void ConfigureDialog::cB_autoDimm_toggled( bool toggled ) {
 }
 
 /*!
- * SLOT: Called if the 'Enable scheme specific blacklist' is toggled.
+ * Slot called if the 'Enable scheme specific blacklist' is toggled.
  * \param toggled boolean, true if toggled on
  *			   false if toggled off
  */
@@ -1538,7 +1538,7 @@ void ConfigureDialog::cB_BlacklistDimm_toggled( bool toggled ){
 }
 
 /*!
- * SLOT: Called if the 'edit blacklist' button for autodimm is toggled.
+ * Slot called if the 'edit blacklist' button for autodimm is toggled.
  */
 void ConfigureDialog::pB_editBlacklistDimm_clicked(){
 	kdDebugFuncIn(trace);
@@ -1575,15 +1575,15 @@ void ConfigureDialog::pB_editBlacklistDimm_clicked(){
 	}
 	blacklistEDlgAD = new blacklistEditDialog(blacklist, _top_text, initialiseImport, this);
 
-	connect( blacklistEDlgAD, TQT_SIGNAL(config_finished(TQStringList)), this,
-		 TQT_SLOT(saveSchemeDimmBlacklist(TQStringList)));
+	connect( blacklistEDlgAD, TQ_SIGNAL(config_finished(TQStringList)), this,
+		 TQ_SLOT(saveSchemeDimmBlacklist(TQStringList)));
 	blacklistEDlgAD->exec();
 
 	kdDebugFuncOut(trace);
 }
 
 /*!
- * SLOT: Called if the signal config_finished(TQStringList) recieved
+ * Slot called if the signal config_finished(TQStringList) recieved
  * and the autdimm blacklist is edited.
  * \param new_blacklist TQStringlist with the edited blacklisted processes
  */
@@ -1605,7 +1605,7 @@ void ConfigureDialog::saveSchemeDimmBlacklist( TQStringList new_blacklist){
 }
 
 /*!
- * SLOT: Called if there \ref sB_autoDimmTime get changed
+ * Slot called if there \ref sB_autoDimmTime get changed
  * \param value Integer with the new value
  */
 void ConfigureDialog::sB_autoDimmTime_valueChanged( int value ) {
@@ -1634,18 +1634,18 @@ void ConfigureDialog::sB_autoDimmTime_valueChanged( int value ) {
 /* ---- END Autodimm SECTION ---- */
 
 /* ---- START Brightness SECTION ---- */
-/*! \b SLOT: to enable the brigthness related widgets */
+/*! \b Slot: to enable the brigthness related widgets */
 void ConfigureDialog::cB_Brightness_toggled( bool toggled ) {
 	kdDebugFuncIn(trace);
 
 	gB_Brightness->setEnabled(toggled);
 	cB_Brightness->setChecked(toggled);
-	connect(brightnessSlider, TQT_SIGNAL(valueChanged (int)), this, TQT_SLOT(brightnessSlider_sliderMoved(int)));
+	connect(brightnessSlider, TQ_SIGNAL(valueChanged (int)), this, TQ_SLOT(brightnessSlider_sliderMoved(int)));
 
 	kdDebugFuncOut(trace);
 }
 
-/*! \b SLOT: to change the brightness if the slider is changed */
+/*! \b Slot: to change the brightness if the slider is changed */
 void ConfigureDialog::brightnessSlider_sliderMoved( int new_value ) {
 	kdDebugFuncIn(trace);
 
@@ -1660,7 +1660,7 @@ void ConfigureDialog::brightnessSlider_sliderMoved( int new_value ) {
 	kdDebugFuncOut(trace);
 }
 
-/*! \b SLOT: to reset the brightness if the reset button clicked */
+/*! \b Slot: to reset the brightness if the reset button clicked */
 void ConfigureDialog::pB_resetBrightness_clicked( ) {
 	kdDebugFuncIn(trace);
 
@@ -1676,7 +1676,7 @@ void ConfigureDialog::pB_resetBrightness_clicked( ) {
 
 /* ---- START battery level SECTION ---- */
 /*!
- * SLOT: called if the warning TQSpinBoxes for battery level is changed.
+ * Slot called if the warning TQSpinBoxes for battery level is changed.
  */
 void ConfigureDialog::sB_batWarning_valueChanged() {
 	kdDebugFuncIn(trace);
@@ -1693,7 +1693,7 @@ void ConfigureDialog::sB_batWarning_valueChanged() {
 }
 
 /*!
- * SLOT: called if the low TQSpinBoxes for battery level is changed.
+ * Slot called if the low TQSpinBoxes for battery level is changed.
  */
 void ConfigureDialog::sB_batLow_valueChanged() {
 	kdDebugFuncIn(trace);
@@ -1714,7 +1714,7 @@ void ConfigureDialog::sB_batLow_valueChanged() {
 }
 
 /*!
- * SLOT: called if the critical TQSpinBoxes for battery level is changed.
+ * Slot called if the critical TQSpinBoxes for battery level is changed.
  */
 void ConfigureDialog::sB_batCritical_valueChanged() {
 	kdDebugFuncIn(trace);
@@ -1731,7 +1731,7 @@ void ConfigureDialog::sB_batCritical_valueChanged() {
 }
 
 /*!
- * SLOT: called if the TQComboBox for the battery warning level action changed,
+ * Slot called if the TQComboBox for the battery warning level action changed,
  *       used to hide/show the related TQSpinboxes if needed.
  */
 void ConfigureDialog::cB_batWarning_activated() {
@@ -1763,7 +1763,7 @@ void ConfigureDialog::cB_batLow_activated() {
 }
 
 /*!
- * SLOT: called if the TQComboBox for the battery critical level action changed,
+ * Slot called if the TQComboBox for the battery critical level action changed,
  *       used to hide/show the related TQSpinboxes if needed.
  */
 void ConfigureDialog::cB_batCritical_activated() {
@@ -1780,7 +1780,7 @@ void ConfigureDialog::cB_batCritical_activated() {
 
 /* ---- END battery level SECTION ---- */
 
-/*! \b SLOT: to open the KNotify config dialog */
+/*! \b Slot: to open the KNotify config dialog */
 void ConfigureDialog::pB_configNotify_released( ) {
 	kdDebugFuncIn(trace);
 
diff --git a/src/countdowndialog.cpp b/src/countdowndialog.cpp
index 7cb86ef..70087f3 100644
--- a/src/countdowndialog.cpp
+++ b/src/countdowndialog.cpp
@@ -53,7 +53,7 @@ countDownDialog::countDownDialog( int timeout, TQWidget *parent, const char *nam
 	timeOut = timeout;
 
 	PROGRESS = new TQTimer(this);
-	connect(PROGRESS, TQT_SIGNAL(timeout()), this, TQT_SLOT(updateProgress()));
+	connect(PROGRESS, TQ_SIGNAL(timeout()), this, TQ_SLOT(updateProgress()));
 
 	this->setCaption(i18n("TDEPowersave"));
 
@@ -137,7 +137,7 @@ bool countDownDialog::showDialog() {
 }
 
 /*!
- * \b TQT_SLOT to get the event if the 'Cancel' button was pressed.
+ * \b Slot to get the event if the 'Cancel' button was pressed.
  */
 void countDownDialog::pB_cancel_pressed() {
 	kdDebugFuncIn(trace);
@@ -162,7 +162,7 @@ void countDownDialog::reject() {
 }
 
 /*!
- * \b TQT_SLOT to handle the change of the progressbar.
+ * \b Slot to handle the change of the progressbar.
  */
 void countDownDialog::updateProgress() {
 	kdDebugFuncIn(trace);
diff --git a/src/dbusInterface.cpp b/src/dbusInterface.cpp
index fccafbc..b388a47 100644
--- a/src/dbusInterface.cpp
+++ b/src/dbusInterface.cpp
@@ -144,19 +144,19 @@ bool dbusInterface::initDBUS(){
 
 	if( !dBusConn.isConnected() ) {
 		kdError() << "Failed to open connection to system message bus: " << dBusConn.lastError().message() << endl;
-		TQTimer::singleShot(4000, this, TQT_SLOT(reconnect()));
+		TQTimer::singleShot(4000, this, TQ_SLOT(reconnect()));
 		return false;
 	}
 
 	// watcher for NameOwnerChanged signals
 	dBusWatch = new TQT_DBusProxy(DBUS_SERVICE_DBUS, DBUS_PATH_DBUS, DBUS_INTERFACE_DBUS, dBusConn);
-	TQObject::connect(dBusWatch, TQT_SIGNAL(dbusSignal(const TQT_DBusMessage&)),
-			  this, TQT_SLOT(handleDBusSignal(const TQT_DBusMessage&)));
+	TQObject::connect(dBusWatch, TQ_SIGNAL(dbusSignal(const TQT_DBusMessage&)),
+			  this, TQ_SLOT(handleDBusSignal(const TQT_DBusMessage&)));
 
 	// watcher for Disconnect signal
 	dBusLocal = new TQT_DBusProxy(DBUS_SERVICE_DBUS, DBUS_PATH_LOCAL, DBUS_INTERFACE_LOCAL, dBusConn);
-	TQObject::connect(dBusLocal, TQT_SIGNAL(dbusSignal(const TQT_DBusMessage&)),
-			  this, TQT_SLOT(handleDBusSignal(const TQT_DBusMessage&)));
+	TQObject::connect(dBusLocal, TQ_SIGNAL(dbusSignal(const TQT_DBusMessage&)),
+			  this, TQ_SLOT(handleDBusSignal(const TQT_DBusMessage&)));
 
 	// find already running SystemD
 	TQT_DBusProxy checkSystemD(DBUS_SERVICE_DBUS, DBUS_PATH_DBUS, DBUS_INTERFACE_DBUS, dBusConn);
@@ -193,7 +193,7 @@ void dbusInterface::handleDBusSignal(const TQT_DBusMessage& msg) {
 	 && msg.interface() == DBUS_INTERFACE_LOCAL
 	 && msg.member() == "Disconnected" ) {
 		close();
-		TQTimer::singleShot(1000, this, TQT_SLOT(reconnect()));
+		TQTimer::singleShot(1000, this, TQ_SLOT(reconnect()));
 		return;
 	}
 
@@ -290,8 +290,8 @@ void dbusInterface::onServiceRegistered(const TQString& service) {
 
 		// watch session changes
 		systemdSeat = new TQT_DBusProxy(SYSTEMD_LOGIN1_SERVICE, seat, DBUS_INTERFACE_PROPERTIES, dBusConn);
-		TQObject::connect(systemdSeat, TQT_SIGNAL(dbusSignal(const TQT_DBusMessage&)),
-				  this, TQT_SLOT(handleDBusSignal(const TQT_DBusMessage&)));
+		TQObject::connect(systemdSeat, TQ_SIGNAL(dbusSignal(const TQT_DBusMessage&)),
+				  this, TQ_SLOT(handleDBusSignal(const TQT_DBusMessage&)));
 
 		// inhibit systemd handling of power/sleep/hibernate/lid buttons
 		// http://www.freedesktop.org/wiki/Software/systemd/inhibit
@@ -342,8 +342,8 @@ void dbusInterface::onServiceRegistered(const TQString& service) {
 
 		// watch session changes
 		consolekitSeat = new TQT_DBusProxy(CK_SERVICE, seat, CK_SEAT_IFACE, dBusConn);
-		TQObject::connect(consolekitSeat, TQT_SIGNAL(dbusSignal(const TQT_DBusMessage&)),
-				  this, TQT_SLOT(handleDBusSignal(const TQT_DBusMessage&)));
+		TQObject::connect(consolekitSeat, TQ_SIGNAL(dbusSignal(const TQT_DBusMessage&)),
+				  this, TQ_SLOT(handleDBusSignal(const TQT_DBusMessage&)));
 		return;
 	}
 }
diff --git a/src/detaileddialog.cpp b/src/detaileddialog.cpp
index 69dc5f0..85de8bc 100644
--- a/src/detaileddialog.cpp
+++ b/src/detaileddialog.cpp
@@ -97,12 +97,12 @@ detaileddialog::detaileddialog( HardwareInfo *_hwinfo, TQPixmap *_pixmap, Settin
 		BatteryFrame->adjustSize();
 		tl_powerConsDesc->hide();
 		tl_powerConsValue->hide();
-		connect(hwinfo, TQT_SIGNAL(generalDataChanged()), this, TQT_SLOT(setBattery()));
-		connect(primaryBatteries, TQT_SIGNAL(batteryChanged()), this, TQT_SLOT(setBattery()));
-		connect(primaryBatteries, TQT_SIGNAL(batteryChargingStateChanged(int)), this,
-			TQT_SLOT(setPowerConsumption()));
-		connect(primaryBatteries, TQT_SIGNAL(batteryRateChanged()), this, 
-			TQT_SLOT(setPowerConsumption()));
+		connect(hwinfo, TQ_SIGNAL(generalDataChanged()), this, TQ_SLOT(setBattery()));
+		connect(primaryBatteries, TQ_SIGNAL(batteryChanged()), this, TQ_SLOT(setBattery()));
+		connect(primaryBatteries, TQ_SIGNAL(batteryChargingStateChanged(int)), this,
+			TQ_SLOT(setPowerConsumption()));
+		connect(primaryBatteries, TQ_SIGNAL(batteryRateChanged()), this, 
+			TQ_SLOT(setPowerConsumption()));
 		setBattery();
 		setPowerConsumption();
 	} else {
@@ -126,21 +126,21 @@ detaileddialog::detaileddialog( HardwareInfo *_hwinfo, TQPixmap *_pixmap, Settin
 	}
 	ProcessorFrame->adjustSize();
 	
-	connect(OkButton, TQT_SIGNAL(clicked()), this, TQT_SLOT(closeDetailedDlg()));
-	connect(hwinfo, TQT_SIGNAL(ACStatus(bool)), this, TQT_SLOT(setAC()));
+	connect(OkButton, TQ_SIGNAL(clicked()), this, TQ_SLOT(closeDetailedDlg()));
+	connect(hwinfo, TQ_SIGNAL(ACStatus(bool)), this, TQ_SLOT(setAC()));
 	// TODO: replace event
-	//connect(pd, TQT_SIGNAL(schemeDataChanged()), this, TQT_SLOT(setInfos()));
-	connect(hwinfo, TQT_SIGNAL(generalDataChanged()), this, TQT_SLOT(setInfos()));
+	//connect(pd, TQ_SIGNAL(schemeDataChanged()), this, TQ_SLOT(setInfos()));
+	connect(hwinfo, TQ_SIGNAL(generalDataChanged()), this, TQ_SLOT(setInfos()));
 
 	if (hwinfo->supportCPUFreq() || cpuInfo->cpuFreqHW) {
 		// Check if cpufreq is available
 		cpuInfo->getCPUMaxSpeed();
 		setProcessor();
-		connect(hwinfo, TQT_SIGNAL(currentCPUFreqPolicyChanged()), this, TQT_SLOT(setInfos()));
+		connect(hwinfo, TQ_SIGNAL(currentCPUFreqPolicyChanged()), this, TQ_SLOT(setInfos()));
 	} else {
 		// .. if not, use cpu throttling
 		if (!cpuInfo->getCPUThrottlingState() || numOfCPUs <= 1) {
-			connect(hwinfo, TQT_SIGNAL(generalDataChanged()), this, TQT_SLOT(setProcessorThrottling()));
+			connect(hwinfo, TQ_SIGNAL(generalDataChanged()), this, TQ_SLOT(setProcessorThrottling()));
 		}
 		setProcessorThrottling();
 	}
@@ -158,7 +158,7 @@ detaileddialog::~detaileddialog() {
 }
 
 /*!
- * \b TQT_SLOT called if the dialog is closed by the user.
+ * \b Slot called if the dialog is closed by the user.
  * We do some cleanups here.
  */
 void detaileddialog::closeDetailedDlg() {
@@ -169,7 +169,7 @@ void detaileddialog::closeDetailedDlg() {
 }
 
 /*!
- * \b TQT_SLOT to set up the battery progress widgets.
+ * \b Slot to set up the battery progress widgets.
  */
 void detaileddialog::setBattery() {
 	kdDebugFuncIn(trace);
@@ -270,7 +270,7 @@ void detaileddialog::setBattery() {
 }
 
 /*!
- * \b TQT_SLOT to set up the Processor/CPU progress bar widgets.
+ * \b Slot to set up the Processor/CPU progress bar widgets.
  */
 void detaileddialog::setPowerConsumption() {
 	kdDebugFuncIn(trace);
@@ -307,7 +307,7 @@ void detaileddialog::setPowerConsumption() {
 }
 
 /*!
- * \b TQT_SLOT to set up the Processor/CPU progress bar widgets.
+ * \b Slot to set up the Processor/CPU progress bar widgets.
  */
 void detaileddialog::setProcessor() {
 	kdDebugFuncIn(trace);
@@ -341,12 +341,12 @@ void detaileddialog::setProcessor() {
 			ProcessorPBar[i]->setEnabled(false);
 		}
 	}
-	TQTimer::singleShot(333, this, TQT_SLOT(setProcessor()));	
+	TQTimer::singleShot(333, this, TQ_SLOT(setProcessor()));	
 	kdDebugFuncOut(trace);
 }
 
 /*!
- * \b TQT_SLOT to set up the Processor/CPU bar widgets for cpu throttling machines.
+ * \b Slot to set up the Processor/CPU bar widgets for cpu throttling machines.
  */
 void detaileddialog::setProcessorThrottling() {
 	kdDebugFuncOut(trace);
@@ -384,14 +384,14 @@ void detaileddialog::setProcessorThrottling() {
 		// currently there are no events we can use to get actual data
 		// so we recheck data ever 2 secs to register changes in the 
 		// throttling state and if a CPU/core online state change
-		TQTimer::singleShot(2000, this, TQT_SLOT(setProcessorThrottling()));
+		TQTimer::singleShot(2000, this, TQ_SLOT(setProcessorThrottling()));
 	}
 
 	kdDebugFuncOut(trace);
 }
 
 /*!
- * \b TQT_SLOT to set up the AC status within the Led widget.
+ * \b Slot to set up the AC status within the Led widget.
  */
 void detaileddialog::setAC() {
 	kdDebugFuncIn(trace);
@@ -409,7 +409,7 @@ void detaileddialog::setAC() {
 }
 
 /*!
- * \b TQT_SLOT to set all additional informtation as e.g. CPUFrequency policy
+ * \b Slot to set all additional informtation as e.g. CPUFrequency policy
  * or current scheme
  */
 void detaileddialog::setInfos() {
diff --git a/src/hardware.cpp b/src/hardware.cpp
index ef1ba23..b098d9a 100644
--- a/src/hardware.cpp
+++ b/src/hardware.cpp
@@ -59,10 +59,10 @@ HardwareInfo::HardwareInfo() {
 
 	// initialize connection to the TDE hardware library
 	m_hwdevices = TDEGlobal::hardwareDevices();
-	connect(m_hwdevices, TQT_SIGNAL(hardwareUpdated(TDEGenericDevice*)), this, TQT_SLOT(processHardwareChangedEvent(TDEGenericDevice*)));
+	connect(m_hwdevices, TQ_SIGNAL(hardwareUpdated(TDEGenericDevice*)), this, TQ_SLOT(processHardwareChangedEvent(TDEGenericDevice*)));
 
 #ifdef USE_EVENT_DEVICES_DIRECTLY
-	connect(m_hwdevices, TQT_SIGNAL(eventDeviceKeyPressed(unsigned int, TDEEventDevice*)), this, TQT_SLOT(processKeyPressEvent(unsigned int, TDEEventDevice*)));
+	connect(m_hwdevices, TQ_SIGNAL(eventDeviceKeyPressed(unsigned int, TDEEventDevice*)), this, TQ_SLOT(processKeyPressEvent(unsigned int, TDEEventDevice*)));
 #endif
 
 	// update everything the first time
@@ -85,7 +85,7 @@ HardwareInfo::HardwareInfo() {
 	// connect to D-Bus
 	dbus_iface = new dbusInterface();
 	sessionIsActive = dbus_iface->checkActiveSession();
-	connect(dbus_iface, TQT_SIGNAL(activeSessionChanged(bool)), this, TQT_SLOT(handleSessionState(bool)));
+	connect(dbus_iface, TQ_SIGNAL(activeSessionChanged(bool)), this, TQ_SLOT(handleSessionState(bool)));
 
 	checkPowermanagement();
 	checkIsLaptop();
@@ -147,13 +147,13 @@ bool HardwareInfo::reinitHardwareInfos () {
 
 
 /*!
- * \b TQT_SLOT called if the state of the current session change
+ * \b Slot called if the state of the current session change
  * \param state boolean represent the state of the session
  */
 void HardwareInfo::handleSessionState( bool state ) {
     if( state != sessionIsActive ) {
 	sessionIsActive = state;
-	TQTimer::singleShot(50, this, TQT_SLOT(emitSessionActiveState()));
+	TQTimer::singleShot(50, this, TQ_SLOT(emitSessionActiveState()));
     }
 }
 
@@ -166,7 +166,7 @@ void HardwareInfo::processHardwareChangedEvent (TDEGenericDevice* device) {
 
 	if (allUDIs.contains( device->uniqueID() )) {
 		if (device->type() == TDEGenericDeviceType::PowerSupply) {
-			TQTimer::singleShot(50, this, TQT_SLOT(checkACAdapterState()));
+			TQTimer::singleShot(50, this, TQ_SLOT(checkACAdapterState()));
 		} else if (device->type() == TDEGenericDeviceType::Battery) {
 			// this is a battery event
 			updateBatteryValues(device);
@@ -174,11 +174,11 @@ void HardwareInfo::processHardwareChangedEvent (TDEGenericDevice* device) {
 			TDEEventDevice* edevice = dynamic_cast<TDEEventDevice*>(device);
 			if (edevice) {
 				if (edevice->eventType() == TDEEventDeviceType::ACPILidSwitch) {
-					TQTimer::singleShot(50, this, TQT_SLOT(checkLidcloseState()));
+					TQTimer::singleShot(50, this, TQ_SLOT(checkLidcloseState()));
 				}
 			}
 		} else if (device->type() == TDEGenericDeviceType::Backlight) {
-			TQTimer::singleShot(50, this, TQT_SLOT(checkBrightness()));
+			TQTimer::singleShot(50, this, TQ_SLOT(checkBrightness()));
 		}
 		// TODO: add needed code
 	} else {
@@ -201,20 +201,20 @@ void HardwareInfo::processKeyPressEvent(unsigned int keycode, TDEEventDevice* ed
 		kdDebug() << "ButtonPressed event from TDE HW library " << endl;
 		if (((edevice->eventType() == TDEEventDeviceType::ACPIPowerButton) || (edevice->eventType() == TDEEventDeviceType::ACPIOtherInput))
 			&& (keycode == KEY_POWER)) {
-			TQTimer::singleShot(50, this, TQT_SLOT(emitPowerButtonPressed()));
+			TQTimer::singleShot(50, this, TQ_SLOT(emitPowerButtonPressed()));
 		} else if (((edevice->eventType() == TDEEventDeviceType::ACPISuspendButton) || (edevice->eventType() == TDEEventDeviceType::ACPIOtherInput))
 			&& (keycode == KEY_SLEEP)) {
-			TQTimer::singleShot(50, this, TQT_SLOT(emitSuspendButtonPressed()));
+			TQTimer::singleShot(50, this, TQ_SLOT(emitSuspendButtonPressed()));
 		} else if (((edevice->eventType() == TDEEventDeviceType::ACPISuspendButton) || (edevice->eventType() == TDEEventDeviceType::ACPIOtherInput))
 			&& (keycode == KEY_SUSPEND)) {
-			TQTimer::singleShot(50, this, TQT_SLOT(emitS2diskButtonPressed()));
+			TQTimer::singleShot(50, this, TQ_SLOT(emitS2diskButtonPressed()));
 		}
 
 	kdDebugFuncOut(trace);
 }
 
 /*!
- * This TQT_SLOT is used to fetch the resume signal and multiplex. If needed some
+ * This slot is used to fetch the resume signal and multiplex. If needed some
  * actions after resume, do this here.
  * \param result 	integer with the result of the resume/suspend
  */
@@ -605,7 +605,7 @@ bool HardwareInfo::intialiseHWInfo() {
 			if (!allUDIs.contains( hwdevice->uniqueID() )) {
 				allUDIs.append( hwdevice->uniqueID() );
 			}
-			connect(edevice, TQT_SIGNAL(switchChanged()), this, TQT_SLOT(checkLidcloseState()));
+			connect(edevice, TQ_SIGNAL(switchChanged()), this, TQ_SLOT(checkLidcloseState()));
 			checkLidcloseState();
 		}
 	}
@@ -622,7 +622,7 @@ bool HardwareInfo::intialiseHWInfo() {
 	Battery *bat;
 	for (bat = BatteryList.first(); bat; bat = BatteryList.next() ) {
 		if (bat->getType() == BAT_PRIMARY) {
-			connect(bat, TQT_SIGNAL(changedBattery()),this, TQT_SLOT(updatePrimaryBatteries()));
+			connect(bat, TQ_SIGNAL(changedBattery()),this, TQ_SLOT(updatePrimaryBatteries()));
 		}
 	}
 
@@ -631,7 +631,7 @@ bool HardwareInfo::intialiseHWInfo() {
 }
 
 /*!
- * The function/TQT_SLOT checks the state of the AC adapter.
+ * The function/slot checks the state of the AC adapter.
  */
 void HardwareInfo::checkACAdapterState() {
 	kdDebugFuncIn(trace);
@@ -722,10 +722,10 @@ void HardwareInfo::updatePrimaryBatteries () {
 		if (primaryBatteries->getNumBatteries() < 1) {
 			setPrimaryBatteriesWarningLevel();
 			primaryBatteries->refreshInfo( BatteryList );
-			connect(primaryBatteries, TQT_SIGNAL(batteryChanged()), this,
-				TQT_SLOT(setPrimaryBatteriesChanges()));
-			connect(primaryBatteries, TQT_SIGNAL(batteryWarnState(int,int)), this,
-				TQT_SLOT(emitBatteryWARNState(int,int)));
+			connect(primaryBatteries, TQ_SIGNAL(batteryChanged()), this,
+				TQ_SLOT(setPrimaryBatteriesChanges()));
+			connect(primaryBatteries, TQ_SIGNAL(batteryWarnState(int,int)), this,
+				TQ_SLOT(emitBatteryWARNState(int,int)));
 		} else {
 			setPrimaryBatteriesWarningLevel();
 			primaryBatteries->refreshInfo( BatteryList );
diff --git a/src/hardware.h b/src/hardware.h
index c7bc3eb..18207b9 100644
--- a/src/hardware.h
+++ b/src/hardware.h
@@ -333,10 +333,10 @@ private slots:
 	//! check if brightness change is possible
 	void checkBrightness();
 
-	//! TQT_SLOT to forward signal about changed battery warning state
+	//! TQ_SLOT to forward signal about changed battery warning state
 	void emitBatteryWARNState (int type, int state);
 
-	//! TQT_SLOT to handle resume and forward a signal for resume
+	//! TQ_SLOT to handle resume and forward a signal for resume
 	void handleResumeSignal (int result);
 
 	//! to emit signal for power button
diff --git a/src/hardware_battery.cpp b/src/hardware_battery.cpp
index 9d5c1a0..d68dfd4 100644
--- a/src/hardware_battery.cpp
+++ b/src/hardware_battery.cpp
@@ -73,7 +73,7 @@ Battery::Battery( TQString _udi ) {
 
 	udi = _udi;
 
-	connect(m_hwdevices, TQT_SIGNAL(hardwareUpdated(TDEGenericDevice*)), this, TQT_SLOT(updateProperty(TDEGenericDevice*)));
+	connect(m_hwdevices, TQ_SIGNAL(hardwareUpdated(TDEGenericDevice*)), this, TQ_SLOT(updateProperty(TDEGenericDevice*)));
 
 	initialized = false;
 
diff --git a/src/inactivity.cpp b/src/inactivity.cpp
index d22d7f8..ed35869 100644
--- a/src/inactivity.cpp
+++ b/src/inactivity.cpp
@@ -59,7 +59,7 @@ inactivity::inactivity(screen *disp) : display(disp),
 	has_XSC_Extension = XScreenSaverQueryExtension( tqt_xdisplay(), &dummy, &dummy );
 	
 	checkInactivity =  new TQTimer( this );
-	connect( checkInactivity, TQT_SIGNAL(timeout()), this, TQT_SLOT(check()));
+	connect( checkInactivity, TQ_SIGNAL(timeout()), this, TQ_SLOT(check()));
 
 	kdDebugFuncOut(trace);
 }
@@ -101,7 +101,7 @@ void inactivity::start( int timeToExpire, TQStringList blacked ) {
 }
 
 /*!
- * \b TQT_SLOT to call check as recheck inactivity if before a running PID
+ * \b Slot to call check as recheck inactivity if before a running PID
  * request was detected.
  */
 void inactivity::recheck() {
@@ -113,14 +113,14 @@ void inactivity::recheck() {
 }
 
 /*!
- * \b TQT_SLOT to call check without a recheck.
+ * \b Slot to call check without a recheck.
  */
 void inactivity::check() {
 	check(false);
 }
 
 /*!
- * \b TQT_SLOT to check the current idle-time of the X-Server and if there
+ * \b Slot to check the current idle-time of the X-Server and if there
  * are blacklisted programs are running. If the through \ref timeToInactivity 
  * defined time is expired, this function emit signal \ref inactivityTimeExpired() .
  * \param recheck   boolean which define if this is a recheck or not. 
@@ -151,7 +151,7 @@ void inactivity::check( bool recheck ) {
 			}
 			else {
 				//called if there is a getPIDs() is running
-				TQTimer::singleShot(500, this, TQT_SLOT(recheck()));
+				TQTimer::singleShot(500, this, TQ_SLOT(recheck()));
 			}
 		}
 		else checkInactivity->start(CHECK_for_INACTIVITY, true);
@@ -322,10 +322,10 @@ void inactivity::checkBlacklisted(){
 	proc = new TDEProcess;
 	*proc << "pidof" << blacklist;
 
-	connect( proc, TQT_SIGNAL(receivedStdout(TDEProcess *, char *, int)),this,
-		 TQT_SLOT(getPIDs(TDEProcess *, char *, int)));
-	connect( proc, TQT_SIGNAL(processExited(TDEProcess *)),
-		 TQT_SLOT(getPIDsExited(TDEProcess *)));
+	connect( proc, TQ_SIGNAL(receivedStdout(TDEProcess *, char *, int)),this,
+		 TQ_SLOT(getPIDs(TDEProcess *, char *, int)));
+	connect( proc, TQ_SIGNAL(processExited(TDEProcess *)),
+		 TQ_SLOT(getPIDsExited(TDEProcess *)));
 	
 	if (!proc->start(TDEProcess::NotifyOnExit, TDEProcess::AllOutput))
 	{
@@ -343,7 +343,7 @@ void inactivity::checkBlacklisted(){
 
 
 /*!
- * \b TQT_SLOT to get the return of the command pidof and parse this to set
+ * \b Slot to get the return of the command pidof and parse this to set
  * \ref blacklisted_running .
  * \param *proc     pointer to the sending TDEProcess
  * \param *buffer   the char pointer to the output of the process to stdout
@@ -376,8 +376,8 @@ void inactivity::getPIDs(TDEProcess */*proc*/, char *buffer, int /*length*/) {
 
 
 /*!
- * \b TQT_SLOT which called if the call of pidof is exited
- * \param proc the KPocess which called this SLOT
+ * \b Slot which called if the call of pidof is exited
+ * \param proc the KProcess which called this slot
  */
 void inactivity::getPIDsExited(TDEProcess *proc){
 	kdDebugFuncIn(trace);
diff --git a/src/infodialog.cpp b/src/infodialog.cpp
index 00a5790..2486855 100644
--- a/src/infodialog.cpp
+++ b/src/infodialog.cpp
@@ -108,7 +108,7 @@ bool infoDialog::dialogIsDisabled() {
 }
 
 /*!
- * SLOT: called if the 'ok' button clicked. This TQT_SLOT sync the settings
+ * Slot called if the 'ok' button clicked. This slot sync the settings
  * and close the dialog.
  */
 void infoDialog::ButtonOK_clicked() {
diff --git a/src/logviewer.cpp b/src/logviewer.cpp
index 2761e40..ce652b5 100644
--- a/src/logviewer.cpp
+++ b/src/logviewer.cpp
@@ -67,7 +67,7 @@ LogViewer::~LogViewer(){
 }
 
 /*!
- * SLOT: Called if the user click on 'Close' Button
+ * Slot called if the user click on 'Close' Button
  */
 void LogViewer::pB_close_clicked() {
 
@@ -75,7 +75,7 @@ void LogViewer::pB_close_clicked() {
 }
 
 /*!
- * SLOT: Called if the user click on 'Save As ...' Button
+ * Slot called if the user click on 'Save As ...' Button
  */
 void LogViewer::pB_save_clicked() {
 
diff --git a/src/screen.cpp b/src/screen.cpp
index ff298f1..da6f8dc 100644
--- a/src/screen.cpp
+++ b/src/screen.cpp
@@ -63,7 +63,7 @@ screen::screen() {
 	screen_save_dcop_ref = DCOPRef( "kdesktop", "KScreensaverIface" );
 	
 	check_xscreensaver_timer =  new TQTimer( this );
-	connect( check_xscreensaver_timer, TQT_SIGNAL(timeout()), this, TQT_SLOT(xscreensaver_ping() ));
+	connect( check_xscreensaver_timer, TQ_SIGNAL(timeout()), this, TQ_SLOT(xscreensaver_ping() ));
 
 	SCREENSAVER_STATUS = checkScreenSaverStatus();
 	kdDebugFuncOut(trace);
@@ -288,7 +288,7 @@ int screen::checkScreenSaverStatus() {
 		gnomeScreensaverCheck = new TDEProcess;
 		*gnomeScreensaverCheck << "gnome-screensaver-command" << "--query";
 
-		connect( gnomeScreensaverCheck , TQT_SIGNAL(processExited(TDEProcess *)),TQT_SLOT(getGSExited(TDEProcess *)));
+		connect( gnomeScreensaverCheck , TQ_SIGNAL(processExited(TDEProcess *)),TQ_SLOT(getGSExited(TDEProcess *)));
 		
 		if(!gnomeScreensaverCheck->start(TDEProcess::NotifyOnExit)) 
 		{
@@ -333,8 +333,8 @@ bool screen::checkScreenSaverActive()
 }
 
 /*!
- * \b TQT_SLOT which called if the call of gnomescreensaver-command exited
- * \param gnomecheckcommand the KPocess which called this SLOT
+ * \b Slot which called if the call of gnomescreensaver-command exited
+ * \param gnomecheckcommand the KProcess which called this slot
  */
 void screen::getGSExited (TDEProcess *gnomecheckcommand) {
 	kdDebugFuncIn(trace);
@@ -485,8 +485,8 @@ xscreensaver:
 
 		xscreensaver_lock = new TDEProcess;
 		*xscreensaver_lock << "xscreensaver-command" << "-lock";
-	        connect(xscreensaver_lock, TQT_SIGNAL(processExited(TDEProcess*)),
-	                this, TQT_SLOT(cleanProcess(TDEProcess*)));
+	        connect(xscreensaver_lock, TQ_SIGNAL(processExited(TDEProcess*)),
+	                this, TQ_SLOT(cleanProcess(TDEProcess*)));
 
 		bool status = xscreensaver_lock->start(TDEProcess::DontCare);
 		if(!status)
@@ -503,8 +503,8 @@ xscreensaver:
 		gnomescreensaver_lock = new TDEProcess;
 		*gnomescreensaver_lock << "gnome-screensaver-command" << "--lock";
 	
-	        connect(gnomescreensaver_lock, TQT_SIGNAL(processExited(TDEProcess*)),
-	                this, TQT_SLOT(cleanProcess(TDEProcess*)));	
+	        connect(gnomescreensaver_lock, TQ_SIGNAL(processExited(TDEProcess*)),
+	                this, TQ_SLOT(cleanProcess(TDEProcess*)));	
 		bool status = gnomescreensaver_lock->start(TDEProcess::DontCare);
 		if(!status)
 		{
@@ -521,8 +521,8 @@ xscreensaver:
 		
 		xlock = new TDEProcess;
 		*xlock << "xlock"; //<< "-mode" << "blank";
-                connect(xlock, TQT_SIGNAL(processExited(TDEProcess*)),
-                           this, TQT_SLOT(cleanProcess(TDEProcess*)));
+                connect(xlock, TQ_SIGNAL(processExited(TDEProcess*)),
+                           this, TQ_SLOT(cleanProcess(TDEProcess*)));
 		bool status = xlock->start(TDEProcess::DontCare);
 		if(!status)
 		{
@@ -555,8 +555,8 @@ bool screen::lockScreen( TQString lock_withMethod ) {
 		
 		xlock = new TDEProcess;
 		*xlock << "xlock";
-                connect(xlock, TQT_SIGNAL(processExited(TDEProcess*)),
-                           this, TQT_SLOT(cleanProcess(TDEProcess*)));
+                connect(xlock, TQ_SIGNAL(processExited(TDEProcess*)),
+                           this, TQ_SLOT(cleanProcess(TDEProcess*)));
 
                 bool status = xlock->start(TDEProcess::DontCare);
 		if(!status)
@@ -570,8 +570,8 @@ bool screen::lockScreen( TQString lock_withMethod ) {
 	else if (lock_withMethod == "gnomescreensaver") {
 		gnomescreensaver_lock = new TDEProcess;
 		*gnomescreensaver_lock << "gnome-screensaver-command" << "--lock";
-                connect(gnomescreensaver_lock, TQT_SIGNAL(processExited(TDEProcess*)),
-                                                this, TQT_SLOT(cleanProcess(TDEProcess*)));
+                connect(gnomescreensaver_lock, TQ_SIGNAL(processExited(TDEProcess*)),
+                                                this, TQ_SLOT(cleanProcess(TDEProcess*)));
 
 		bool status = gnomescreensaver_lock->start(TDEProcess::DontCare);
 		if(!status)
@@ -605,8 +605,8 @@ xscreensaver:
 				
 				xscreensaver_lock = new TDEProcess;
 				*xscreensaver_lock << "xscreensaver-command" << "-lock";
-		                connect(xscreensaver_lock, TQT_SIGNAL(processExited(TDEProcess*)),
-                                                this, TQT_SLOT(cleanProcess(TDEProcess*)));
+		                connect(xscreensaver_lock, TQ_SIGNAL(processExited(TDEProcess*)),
+                                                this, TQ_SLOT(cleanProcess(TDEProcess*)));
 
 				bool status = xscreensaver_lock->start(TDEProcess::DontCare);
 				if(!status)
@@ -688,8 +688,8 @@ bool screen::resetXScreensaver(){
 
 		xscreensaver_reset = new TDEProcess;
 		*xscreensaver_reset << "xscreensaver-command" << "-restart";
-	        connect(xscreensaver_reset, TQT_SIGNAL(processExited(TDEProcess*)),
-	                this, TQT_SLOT(cleanProcess(TDEProcess*)));
+	        connect(xscreensaver_reset, TQ_SIGNAL(processExited(TDEProcess*)),
+	                this, TQ_SLOT(cleanProcess(TDEProcess*)));
 
 		bool status = xscreensaver_reset->start(TDEProcess::DontCare);
 		if(!status)
@@ -713,8 +713,8 @@ void screen::forceDPMSOff() {
 	
 	TDEProcess *xset = new TDEProcess;
 	*xset << "xset" << "dpms" << "force" << "off";
-        connect(xset, TQT_SIGNAL(processExited(TDEProcess*)),
-                this, TQT_SLOT(cleanProcess(TDEProcess*)));
+        connect(xset, TQ_SIGNAL(processExited(TDEProcess*)),
+                this, TQ_SLOT(cleanProcess(TDEProcess*)));
 	if(!xset->start())
 	{
 		delete xset;
diff --git a/src/tdepowersave.cpp b/src/tdepowersave.cpp
index 28ba46a..3519d45 100644
--- a/src/tdepowersave.cpp
+++ b/src/tdepowersave.cpp
@@ -103,33 +103,33 @@ tdepowersave::tdepowersave( bool force_acpi_check, bool trace_func ) : KSystemTr
 						settings->batteryCriticalLevel);
 
 	// connect to signals for changes
-	connect(hwinfo, TQT_SIGNAL(generalDataChanged()), this, TQT_SLOT(update()));
-	connect(hwinfo, TQT_SIGNAL(primaryBatteryChanged()), this, TQT_SLOT(update()));
-	connect(hwinfo, TQT_SIGNAL(ACStatus(bool)), this, TQT_SLOT(handleACStatusChange (bool)));
-	connect(hwinfo, TQT_SIGNAL(resumed(int)), this, TQT_SLOT(forwardResumeSignal(int)));
+	connect(hwinfo, TQ_SIGNAL(generalDataChanged()), this, TQ_SLOT(update()));
+	connect(hwinfo, TQ_SIGNAL(primaryBatteryChanged()), this, TQ_SLOT(update()));
+	connect(hwinfo, TQ_SIGNAL(ACStatus(bool)), this, TQ_SLOT(handleACStatusChange (bool)));
+	connect(hwinfo, TQ_SIGNAL(resumed(int)), this, TQ_SLOT(forwardResumeSignal(int)));
 
 	// connect to error messages
-	connect(autoSuspend, TQT_SIGNAL(displayErrorMsg(TQString)), this, TQT_SLOT(showErrorMessage(TQString)));
+	connect(autoSuspend, TQ_SIGNAL(displayErrorMsg(TQString)), this, TQ_SLOT(showErrorMessage(TQString)));
 
 	// connect to events
-	connect(hwinfo, TQT_SIGNAL(lidclosetStatus(bool)), this, TQT_SLOT(handleLidEvent(bool)));
-	connect(hwinfo, TQT_SIGNAL(powerButtonPressed()), this, TQT_SLOT (handlePowerButtonEvent()));
-	connect(hwinfo, TQT_SIGNAL(sleepButtonPressed()), this, TQT_SLOT (handleSuspendButtonEvent()));
-	connect(hwinfo, TQT_SIGNAL(s2diskButtonPressed()), this, TQT_SLOT (handleS2DiskButtonEvent()));
-	connect(hwinfo, TQT_SIGNAL(batteryWARNState(int,int)), this, TQT_SLOT(notifyBatteryStatusChange (int,int)));
-	connect(hwinfo, TQT_SIGNAL(desktopSessionIsActive(bool)), this, TQT_SLOT (handleSessionState(bool)));
-	connect(autoSuspend, TQT_SIGNAL(inactivityTimeExpired()), this, TQT_SLOT(do_autosuspendWarn()));
-	connect(autoDimm, TQT_SIGNAL(inactivityTimeExpired()), this, TQT_SLOT(do_downDimm()));
-	connect(autoDimm, TQT_SIGNAL(UserIsActiveAgain()), this, TQT_SLOT(do_upDimm()));
+	connect(hwinfo, TQ_SIGNAL(lidclosetStatus(bool)), this, TQ_SLOT(handleLidEvent(bool)));
+	connect(hwinfo, TQ_SIGNAL(powerButtonPressed()), this, TQ_SLOT (handlePowerButtonEvent()));
+	connect(hwinfo, TQ_SIGNAL(sleepButtonPressed()), this, TQ_SLOT (handleSuspendButtonEvent()));
+	connect(hwinfo, TQ_SIGNAL(s2diskButtonPressed()), this, TQ_SLOT (handleS2DiskButtonEvent()));
+	connect(hwinfo, TQ_SIGNAL(batteryWARNState(int,int)), this, TQ_SLOT(notifyBatteryStatusChange (int,int)));
+	connect(hwinfo, TQ_SIGNAL(desktopSessionIsActive(bool)), this, TQ_SLOT (handleSessionState(bool)));
+	connect(autoSuspend, TQ_SIGNAL(inactivityTimeExpired()), this, TQ_SLOT(do_autosuspendWarn()));
+	connect(autoDimm, TQ_SIGNAL(inactivityTimeExpired()), this, TQ_SLOT(do_downDimm()));
+	connect(autoDimm, TQ_SIGNAL(UserIsActiveAgain()), this, TQ_SLOT(do_upDimm()));
 
 	// connect to hotkeys
 	m_globalAccel = new TDEGlobalAccel( this );
 	m_globalAccel->insert( "Power button", i18n( "Execute configured power button action"), TQString(),
-			TDEShortcut(TQString("XF86PowerOff")), TDEShortcut(TQString("XF86PowerOff")), this, TQT_SLOT( handlePowerButtonEvent() ) );
+			TDEShortcut(TQString("XF86PowerOff")), TDEShortcut(TQString("XF86PowerOff")), this, TQ_SLOT( handlePowerButtonEvent() ) );
 	m_globalAccel->insert( "Suspend button", i18n( "Suspend configured power button action"), TQString(),
-			TDEShortcut(TQString("XF86Suspend")), TDEShortcut(TQString("XF86Suspend")), this, TQT_SLOT( handleSuspendButtonEvent() ) );
+			TDEShortcut(TQString("XF86Suspend")), TDEShortcut(TQString("XF86Suspend")), this, TQ_SLOT( handleSuspendButtonEvent() ) );
 	m_globalAccel->insert( "Hibernate button", i18n( "Hibernate configured power button action"), TQString(),
-			TDEShortcut(TQString("XF86Suspend")), TDEShortcut(TQString("XF86Suspend")), this, TQT_SLOT( handleS2DiskButtonEvent() ) );
+			TDEShortcut(TQString("XF86Suspend")), TDEShortcut(TQString("XF86Suspend")), this, TQ_SLOT( handleS2DiskButtonEvent() ) );
 	m_globalAccel->readSettings();
 	m_globalAccel->updateConnections();
 
@@ -148,10 +148,10 @@ tdepowersave::tdepowersave( bool force_acpi_check, bool trace_func ) : KSystemTr
         suspendType = "NULL";
 
 	BAT_WARN_ICON_Timer = new TQTimer(this);
-	connect(BAT_WARN_ICON_Timer, TQT_SIGNAL(timeout()), this, TQT_SLOT(do_setIconBG()));
+	connect(BAT_WARN_ICON_Timer, TQ_SIGNAL(timeout()), this, TQ_SLOT(do_setIconBG()));
 
 	m_autoDimmTimer = new TQTimer(this);
-	connect(m_autoDimmTimer, TQT_SIGNAL(timeout()), this, TQT_SLOT(do_dimm()));
+	connect(m_autoDimmTimer, TQ_SIGNAL(timeout()), this, TQ_SLOT(do_dimm()));
 
 	initMenu();
 	update();
@@ -184,27 +184,27 @@ void tdepowersave::initMenu() {
 
 	CONFIGURE_ID = this->contextMenu()->insertItem(SmallIcon("configure", TQIconSet::Automatic),
 								  i18n("Configure TDEPowersave..."),
-								  this, TQT_SLOT(showConfigureDialog()));
+								  this, TQ_SLOT(showConfigureDialog()));
 	CONFIGURE_EVENTS_ID = this->contextMenu()->insertItem(SmallIcon("knotify", TQIconSet::Automatic),
 							      i18n("Configure Notifications..."),
-							      this, TQT_SLOT(showConfigureNotificationsDialog()));
+							      this, TQ_SLOT(showConfigureNotificationsDialog()));
 #ifdef ENABLE_YAST_ENTRY
 	YAST_MODULE_MENU_ID = this->contextMenu()->insertItem(SmallIcon("yast", TQIconSet::Automatic),
 							      i18n("Start YaST2 Power Management Module..."),
-							      this, TQT_SLOT(do_config()));
+							      this, TQ_SLOT(do_config()));
 #endif
 
 	SLEEP_SEPARATOR_MENU_ID = this->contextMenu()->insertSeparator();
 	FREEZE_MENU_ID = this->contextMenu()->insertItem( SmallIconSet("suspend_to_ram", TQIconSet::Automatic),
-							   i18n("Freeze"), this, TQT_SLOT(do_freeze()));
+							   i18n("Freeze"), this, TQ_SLOT(do_freeze()));
 	STANDBY_MENU_ID = this->contextMenu()->insertItem( SmallIconSet("stand_by", TQIconSet::Automatic),
-							   i18n("Standby"), this, TQT_SLOT(do_standby()));
+							   i18n("Standby"), this, TQ_SLOT(do_standby()));
 	SUSPEND2RAM_MENU_ID = this->contextMenu()->insertItem( SmallIconSet("suspend_to_ram",
-							       TQIconSet::Automatic), i18n("Suspend"), this, TQT_SLOT(do_suspend2ram()));
+							       TQIconSet::Automatic), i18n("Suspend"), this, TQ_SLOT(do_suspend2ram()));
 	SUSPEND2DISK_MENU_ID = this->contextMenu()->insertItem( SmallIconSet("suspend_to_disk",
-								TQIconSet::Automatic), i18n("Hibernate"), this, TQT_SLOT(do_suspend2disk()));
+								TQIconSet::Automatic), i18n("Hibernate"), this, TQ_SLOT(do_suspend2disk()));
 	SUSPEND_HYBRID_MENU_ID = this->contextMenu()->insertItem( SmallIconSet("suspend_to_disk",
-								TQIconSet::Automatic), i18n("Hybrid Suspend"), this, TQT_SLOT(do_suspend_hybrid()));
+								TQIconSet::Automatic), i18n("Hybrid Suspend"), this, TQ_SLOT(do_suspend_hybrid()));
 
 	speed_menu = new TQPopupMenu(this, i18n("Set CPU Frequency Policy").utf8());
 	speed_menu->insertItem(i18n("Performance"), PERFORMANCE);
@@ -214,21 +214,21 @@ void tdepowersave::initMenu() {
 	CPUFREQ_SEPARATOR_MENU_ID = contextMenu()->insertSeparator();
 
 	CPUFREQ_MENU_ID = contextMenu()->insertItem(i18n("Set CPU Frequency Policy"), speed_menu);
-	connect(speed_menu, TQT_SIGNAL(activated(int)), this, TQT_SLOT(do_setSpeedPolicy(int)));
-	connect(hwinfo, TQT_SIGNAL(currentCPUFreqPolicyChanged()), this, TQT_SLOT(updateCPUFreqMenu()));
+	connect(speed_menu, TQ_SIGNAL(activated(int)), this, TQ_SLOT(do_setSpeedPolicy(int)));
+	connect(hwinfo, TQ_SIGNAL(currentCPUFreqPolicyChanged()), this, TQ_SLOT(updateCPUFreqMenu()));
 
 
 	SCHEME_SEPARATOR_MENU_ID = contextMenu()->insertSeparator();
 
 	scheme_menu = new TQPopupMenu(this, i18n("Set Active Scheme").utf8());
 	SCHEME_MENU_ID = contextMenu()->insertItem(i18n("Set Active Scheme"), scheme_menu);
-	connect(scheme_menu, TQT_SIGNAL(activated(int)), this, TQT_SLOT(do_setActiveScheme(int)));
+	connect(scheme_menu, TQ_SIGNAL(activated(int)), this, TQ_SLOT(do_setActiveScheme(int)));
 
 	// menu entry for the autosuspend disable checkbox, disabled by default, only
 	// displayed if autosuspend for the current scheme is activated
 	AUTOSUSPEND_SEPARATOR_MENU_ID = contextMenu()->insertSeparator();
 	AUTOSUSPEND_MENU_ID = this->contextMenu()->insertItem( i18n("Disable Actions on Inactivity"),
-							       this,TQT_SLOT(do_setAutosuspend()));
+							       this,TQ_SLOT(do_setAutosuspend()));
 	this->contextMenu()->setItemVisible(AUTOSUSPEND_SEPARATOR_MENU_ID, false);
 	this->contextMenu()->setItemVisible(AUTOSUSPEND_MENU_ID, false);
 
@@ -237,10 +237,10 @@ void tdepowersave::initMenu() {
 	// Create help submenu
 	KHelpMenu *m_help = new KHelpMenu(this, TDEGlobal::instance()->aboutData(), false, actionCollection());
 	TDEPopupMenu *help = m_help->menu();
-	help->connectItem(KHelpMenu::menuHelpContents, this, TQT_SLOT(slotHelpContents()));
+	help->connectItem(KHelpMenu::menuHelpContents, this, TQ_SLOT(slotHelpContents()));
 	this->contextMenu()->insertItem(SmallIcon("help"), KStdGuiItem::help().text(), help);
 
-	connect(this, TQT_SIGNAL(quitSelected()), this, TQT_SLOT(_quit()));
+	connect(this, TQ_SIGNAL(quitSelected()), this, TQ_SLOT(_quit()));
 
 	kdDebugFuncOut(trace);
 }
@@ -286,9 +286,9 @@ void tdepowersave::showConfigureDialog() {
 			configDlg = new ConfigureDialog(config, hwinfo, settings);
  			configDlg->show();
 			config_dialog_shown = true;
-			connect(configDlg, TQT_SIGNAL(destroyed()), this, TQT_SLOT(observeConfigDlg()));
-			connect(configDlg, TQT_SIGNAL(openHelp()), this, TQT_SLOT(slotHelp()));
-			connect(configDlg, TQT_SIGNAL(openKNotify()), this, TQT_SLOT(showConfigureNotificationsDialog()));
+			connect(configDlg, TQ_SIGNAL(destroyed()), this, TQ_SLOT(observeConfigDlg()));
+			connect(configDlg, TQ_SIGNAL(openHelp()), this, TQ_SLOT(slotHelp()));
+			connect(configDlg, TQ_SIGNAL(openKNotify()), this, TQ_SLOT(showConfigureNotificationsDialog()));
 		}
 		else {
 			KPassivePopup::message(i18n("WARNING"), i18n("Cannot find any schemes."),
@@ -520,7 +520,7 @@ void tdepowersave::updateTooltip(){
 }
 
 /*!
- * \b TQT_SLOT to starts the Yast2-power-management module. This called by the menuentry
+ * \b Slot to starts the Yast2-power-management module. This called by the menuentry
  * with ID \ref YAST_MODULE_MENU_ID, named "Start YaST2 Power Management Module".
  * It create a new TDEProcess and execute "/sbin/yast2 power-management" with tdesu.
  */
@@ -533,8 +533,8 @@ void tdepowersave::do_config(){
 	yast2 = new TDEProcess;
 	*yast2 << "tdesu" << "--nonewdcop" << "/sbin/yast2" << "power-management";
 
-	connect(yast2, TQT_SIGNAL(processExited(TDEProcess *)),
-	         TQT_SLOT(slotConfigProcessExited(TDEProcess *)));
+	connect(yast2, TQ_SIGNAL(processExited(TDEProcess *)),
+	         TQ_SLOT(slotConfigProcessExited(TDEProcess *)));
 	if(!yast2->start(TDEProcess::NotifyOnExit))
 	{
 		delete yast2;
@@ -549,7 +549,7 @@ void tdepowersave::do_config(){
 }
 
 /*!
- * \b TQT_SLOT to open the tdepowersave help
+ * \b Slot to open the tdepowersave help
  */
 void tdepowersave::slotHelp()
 {
@@ -557,7 +557,7 @@ void tdepowersave::slotHelp()
 }
 
 /*!
- * \b TQT_SLOT to open the tdepowersave About dialog
+ * \b Slot to open the tdepowersave About dialog
  */
 void tdepowersave::slotAbout()
 {
@@ -566,7 +566,7 @@ void tdepowersave::slotAbout()
 }
 
 /*!
- * \b TQT_SLOT to set the icon background on/off if battery is in critical, low or warning-state. Within
+ * \b Slot to set the icon background on/off if battery is in critical, low or warning-state. Within
  * this function we set \ref icon_state_changed to true and call \ref redrawPixmap() to redraw the
  * kickerapplet icon and create a icon with blinking background. \n \n
  * The slot called by the TQTimer \ref BAT_WARN_ICON_Timer . The interval of the timer is defined
@@ -582,7 +582,7 @@ void tdepowersave::do_setIconBG(){
 }
 
 /*!
- * \b TQT_SLOT to enable/disable the autosuspend.
+ * \b Slot to enable/disable the autosuspend.
  */
 void tdepowersave::do_setAutosuspend(){
 	kdDebugFuncIn(trace);
@@ -607,7 +607,7 @@ void tdepowersave::do_setAutosuspend(){
 }
 
 /*!
- * \b TQT_SLOT which called if the \ref configDlg is destroyed. We set within this SLOT
+ * \b Slot which called if the \ref configDlg is destroyed. We set within this slot
  * \ref config_dialog_shown to false.
  * TODO: check if we maybe should force here the current default scheme depending on the AC/battery state
  */
@@ -633,7 +633,7 @@ void tdepowersave::observeConfigDlg(){
 }
 
 /*!
- * \b TQT_SLOT which called from \ref do_config() if the 'tdesu yast2' TDEProcess exited.
+ * \b Slot which called from \ref do_config() if the 'tdesu yast2' TDEProcess exited.
  * This function control the return value and display if needed a errormessage on failure.
  */
 void tdepowersave::slotConfigProcessExited(TDEProcess *proc){
@@ -664,7 +664,7 @@ void tdepowersave::slotConfigProcessExited(TDEProcess *proc){
 }
 
 /*!
- * \b TQT_SLOT to send the command for "suspend to disk" to TDE hardware library.
+ * \b Slot to send the command for "suspend to disk" to TDE hardware library.
  * If there is a error while "suspend to disk" the user get a messagebox.
  * This function need a power management backend in TDE hardware library for "suspend to disk".
  * \return boolean with the result of the operation
@@ -720,7 +720,7 @@ bool tdepowersave::do_suspend2disk(){
 }
 
 /*!
- * \b TQT_SLOT to send the command for "hybrid suspend" to TDE hardware library.
+ * \b Slot to send the command for "hybrid suspend" to TDE hardware library.
  * If there is a error while "hybrid suspend" the user get a messagebox.
  * This function need a power management backend in TDE hardware library for "hybrid suspend".
  * \return boolean with the result of the operation
@@ -776,7 +776,7 @@ bool tdepowersave::do_suspend_hybrid(){
 }
 
 /*!
- * \b TQT_SLOT to send the command for "suspend to RAM" to the TDE hardware library.
+ * \b Slot to send the command for "suspend to RAM" to the TDE hardware library.
  * If there is a error while "suspend to RAM" the user get a messagebox.
  * This function need a power management backend in TDE hardware library for "suspend to RAM".
  * \return boolean with the result of the operation
@@ -832,7 +832,7 @@ bool tdepowersave::do_suspend2ram(){
 }
 
 /*!
- * \b TQT_SLOT to send the command for "freeze" to the TDE hardware library.
+ * \b Slot to send the command for "freeze" to the TDE hardware library.
  * If there is a error while "freeze" the user get e messagebox.
  * This function need a power management backend in TDE hardware library for "freeze".
  * \return boolean with the result of the operation
@@ -887,7 +887,7 @@ bool tdepowersave::do_freeze(){
 }
 
 /*!
- * \b TQT_SLOT to send the command for "stand-by" to the TDE hardware library.
+ * \b Slot to send the command for "stand-by" to the TDE hardware library.
  * If there is a error while "stand-by" the user get e messagebox.
  * This function need a power management backend in TDE hardware library for "stand-by".
  * \return boolean with the result of the operation
@@ -942,7 +942,7 @@ bool tdepowersave::do_standby(){
 }
 
 /*!
- * \b TQT_SLOT to send check if we should display the warning dialog and display
+ * \b Slot to send check if we should display the warning dialog and display
  * the dialog if needed or call directly autosuspend after the signal
  * \ref autosuspend::inactivityTimeExpired was recieved.
  */
@@ -1008,7 +1008,7 @@ void tdepowersave::do_autosuspendWarn() {
 
 				countdown->setMessageText(message);
 
-				connect(countdown, TQT_SIGNAL(dialogClosed(bool)), this, TQT_SLOT(do_autosuspend(bool)));
+				connect(countdown, TQ_SIGNAL(dialogClosed(bool)), this, TQ_SLOT(do_autosuspend(bool)));
 				countdown->showDialog();
 			}
 		}
@@ -1022,7 +1022,7 @@ void tdepowersave::do_autosuspendWarn() {
 }
 
 /*!
- * \b TQT_SLOT to send the related suspend command for autosuspend
+ * \b Slot to send the related suspend command for autosuspend
  * \param  cancel boolean with info if the autosuspend should get canceled
  * \return boolean with the result of the operation
  * \retval true if successful
@@ -1065,7 +1065,7 @@ bool tdepowersave::do_autosuspend(bool cancel) {
 }
 
 /*!
- * \b TQT_SLOT to dimm the display down to the configured level if the signal
+ * \b Slot to dimm the display down to the configured level if the signal
  * \ref autodimm::inactivityTimeExpired was recieved.
  * \param
  * \return boolean with the result of the operation
@@ -1091,7 +1091,7 @@ void tdepowersave::do_downDimm() {
 			}
 		} else {
 			// wait until the timer is stopped, try later!
-			TQTimer::singleShot(2000, this, TQT_SLOT(do_downDimm()));
+			TQTimer::singleShot(2000, this, TQ_SLOT(do_downDimm()));
 		}
 	}
 
@@ -1099,7 +1099,7 @@ void tdepowersave::do_downDimm() {
 }
 
 /*!
- * \b TQT_SLOT to dimm the display up to the configured level if the signal
+ * \b Slot to dimm the display up to the configured level if the signal
  * \ref autodimm::UserIsActiveAgain was recieved.
  * \param
  * \return boolean with the result of the operation
@@ -1129,7 +1129,7 @@ void tdepowersave::do_upDimm() {
 			setAutoDimm(false);
 		} else {
 			// wait until the timer is stopped, try later!
-			TQTimer::singleShot(2000, this, TQT_SLOT(do_downDimm()));
+			TQTimer::singleShot(2000, this, TQ_SLOT(do_downDimm()));
 		}
 	}
 
@@ -1138,7 +1138,7 @@ void tdepowersave::do_upDimm() {
 
 
 /*!
- * \b TQT_SLOT to dimm the display down
+ * \b Slot to dimm the display down
  * \return boolean with the result of the operation
  * \retval true 	if successful
  * \retval false 	else
@@ -1304,7 +1304,7 @@ void tdepowersave::handleS2DiskButtonEvent() {
 }
 
 /*!
- * \b TQT_SLOT to handle the lidclose event. If the screen get locked
+ * \b Slot to handle the lidclose event. If the screen get locked
  * depends on the user specific settings.
  * \param closed 	boolean with info if the lid is closed or not
  */
@@ -1362,7 +1362,7 @@ void tdepowersave::handleLidEvent( bool closed ){
 }
 
 /*!
- * \b TQT_SLOT to show the login dialog if the desktop was locked before the suspend.
+ * \b Slot to show the login dialog if the desktop was locked before the suspend.
  */
 void tdepowersave::activateLoginScreen(){
 	kdDebugFuncIn(trace);
@@ -1372,14 +1372,14 @@ void tdepowersave::activateLoginScreen(){
 	settings->load_general_settings();
 
 	if(settings->timeToFakeKeyAfterLock >= 0) {
-		TQTimer::singleShot(settings->timeToFakeKeyAfterLock, display, TQT_SLOT(fakeShiftKeyEvent()));
+		TQTimer::singleShot(settings->timeToFakeKeyAfterLock, display, TQ_SLOT(fakeShiftKeyEvent()));
 	}
 
 	kdDebugFuncOut(trace);
 }
 
 /*!
- * \b TQT_SLOT to set the current suspend type for later use.
+ * \b Slot to set the current suspend type for later use.
  */
 void tdepowersave::setSuspendType( TQString suspendtype){
 	kdDebugFuncIn(trace);
@@ -1390,7 +1390,7 @@ void tdepowersave::setSuspendType( TQString suspendtype){
 }
 
 /*!
- * \b TQT_SLOT which called if tdepowersave is exited by the user. In this case the user
+ * \b Slot which called if tdepowersave is exited by the user. In this case the user
  * is asked through a yes/no box if "tdepowersave start automatically on log in" and the
  * result is written to the KDE configfile.
  */
@@ -1435,7 +1435,7 @@ void tdepowersave::_quit (){
 }
 
 /*!
- * \b TQT_SLOT called if the user select a 'CPU Frequency Policy' from the menu ( \ref CPUFREQ_MENU_ID ).
+ * \b Slot called if the user select a 'CPU Frequency Policy' from the menu ( \ref CPUFREQ_MENU_ID ).
  */
 void tdepowersave::do_setSpeedPolicy(int menu_id){
 	if (trace) kdDebug() << funcinfo << "IN: " << "menu_id/set policy to: " << menu_id << endl;
@@ -1453,7 +1453,7 @@ void tdepowersave::do_setSpeedPolicy(int menu_id){
 }
 
 /*!
- * \b TQT_SLOT called if the user select a scheme from the menu. If there is any errormessage
+ * \b Slot called if the user select a scheme from the menu. If there is any errormessage
  * while try to set the selected scheme, the user get a messagebox with info.
  */
 void tdepowersave::do_setActiveScheme( int i ){
@@ -1799,7 +1799,7 @@ void tdepowersave::mousePressEvent(TQMouseEvent *qme){
 }
 
 /*!
- * \b TQT_SLOT called if the detaileddialog is closed. With this we prevent open
+ * \b Slot called if the detaileddialog is closed. With this we prevent open
  * the dialog twice, use this function to reset the used variables.
  */
 void tdepowersave::closedetaileddialog() {
@@ -1807,7 +1807,7 @@ void tdepowersave::closedetaileddialog() {
 }
 
 /*!
- * \b TQT_SLOT used to display messeges in tdepowersave. This function
+ * \b Slot used to display messeges in tdepowersave. This function
  * block all messeges which we have in tdepowersave!
  */
 void tdepowersave::showErrorMessage( TQString msg ){
@@ -1942,7 +1942,7 @@ void tdepowersave::setSchemeSettings(){
 }
 
 /*!
- * \b TQT_SLOT which called to set and start the autosuspend monitoring.
+ * \b Slot which called to set and start the autosuspend monitoring.
  * \param resumed boolean value which represent information if machine
  *		  currently back from suspend/standby
  */
@@ -1992,7 +1992,7 @@ void tdepowersave::setAutoSuspend( bool resumed ){
 			autoSuspend->stop();
 			delete autoSuspend;
 			autoSuspend = new autosuspend(display);
-			connect(autoSuspend, TQT_SIGNAL(inactivityTimeExpired()), this, TQT_SLOT(do_autosuspendWarn()));
+			connect(autoSuspend, TQ_SIGNAL(inactivityTimeExpired()), this, TQ_SLOT(do_autosuspendWarn()));
 		}
 
 		if (settings->autoSuspendCountdown && (settings->autoSuspendCountdownTimeout > 0)) {
@@ -2025,7 +2025,7 @@ void tdepowersave::setAutoSuspend( bool resumed ){
 }
 
 /*!
- * \b TQT_SLOT which called to set and start the autodimm monitoring.
+ * \b Slot which called to set and start the autodimm monitoring.
  * \param resumed boolean value which represent information if machine
  *		  currently back from suspend/standby
  */
@@ -2042,8 +2042,8 @@ void tdepowersave::setAutoDimm( bool resumed ){
 				autoDimm->stop();
 				delete autoDimm;
 				autoDimm = new autodimm(display);
-				connect(autoDimm, TQT_SIGNAL(inactivityTimeExpired()), this, TQT_SLOT(do_downDimm()));
-				connect(autoDimm, TQT_SIGNAL(UserIsActiveAgain()), this, TQT_SLOT(do_upDimm()));
+				connect(autoDimm, TQ_SIGNAL(inactivityTimeExpired()), this, TQ_SLOT(do_downDimm()));
+				connect(autoDimm, TQ_SIGNAL(UserIsActiveAgain()), this, TQ_SLOT(do_upDimm()));
 			}
 
 			if (settings->autoDimmSBlistEnabled) {
@@ -2063,7 +2063,7 @@ void tdepowersave::setAutoDimm( bool resumed ){
 // -------- start KNotify functions ------------- //
 
 /*!
- * \b TQT_SLOT called if a battery warning state reached and related signal recieved.
+ * \b Slot called if a battery warning state reached and related signal recieved.
  * Here we emit the related KNotify event, if not disabled.
  * \param type  integer with  the type of the battery
  * \param state integer represent the reached battery state
@@ -2120,7 +2120,7 @@ void tdepowersave::notifyBatteryStatusChange ( int type, int state ) {
 								  "will go shutdown in 30 seconds")
 								.arg(min/ 60).arg(min%60));
 
-				TQTimer::singleShot(30000, this, TQT_SLOT(handleCriticalBatteryActionCall()));
+				TQTimer::singleShot(30000, this, TQ_SLOT(handleCriticalBatteryActionCall()));
 			} else {
 				if (!settings->disableNotifications)
 					KNotifyClient::event(this->winId(), "battery_critical_event",
@@ -2198,16 +2198,16 @@ void tdepowersave::handleActionCall ( action action, int value , bool checkAC, b
 				}
 				break;
 			case GO_SUSPEND2RAM:
-				TQTimer::singleShot(100, this, TQT_SLOT(do_suspend2ram()));
+				TQTimer::singleShot(100, this, TQ_SLOT(do_suspend2ram()));
 				break;
 			case GO_SUSPEND2DISK:
-				TQTimer::singleShot(100, this, TQT_SLOT(do_suspend2disk()));
+				TQTimer::singleShot(100, this, TQ_SLOT(do_suspend2disk()));
 				break;
 			case GO_SUSPEND_HYBRID:
-				TQTimer::singleShot(100, this, TQT_SLOT(do_suspend_hybrid()));
+				TQTimer::singleShot(100, this, TQ_SLOT(do_suspend_hybrid()));
 				break;
 			case GO_FREEZE:
-				TQTimer::singleShot(100, this, TQT_SLOT(do_freeze()));
+				TQTimer::singleShot(100, this, TQ_SLOT(do_freeze()));
 				break;
 			case BRIGHTNESS:
 				hwinfo->setBrightnessPercentage(value);
@@ -2252,7 +2252,7 @@ void tdepowersave::handleActionCall ( action action, int value , bool checkAC, b
 }
 
 /*!
- * \b TQT_SLOT called if ac stated changed. Here we emit the related KNotify event.
+ * \b Slot called if ac stated changed. Here we emit the related KNotify event.
  * and switch to the AC/battery scheme depending on the state of AC
  * \param acstate boolean represent the state of AC (true == AC plugged in ...)
  */
@@ -2290,7 +2290,7 @@ void tdepowersave::handleACStatusChange ( bool acstate , bool notifyEvent ) {
 }
 
 /*!
- * \b TQT_SLOT called if scheme switched. Here we emit the related KNotify events
+ * \b Slot called if scheme switched. Here we emit the related KNotify events
  * if they are not disabled.
  */
 void tdepowersave::notifySchemeSwitch() {
@@ -2314,7 +2314,7 @@ void tdepowersave::notifySchemeSwitch() {
 }
 
 /*!
- * \b TQT_SLOT called if the machine suspend. Here we emit the related KNotify events
+ * \b Slot called if the machine suspend. Here we emit the related KNotify events
  * if they are not disabled.
  */
 void tdepowersave::notifySuspend( int suspendType ) {
@@ -2356,7 +2356,7 @@ void tdepowersave::notifySuspend( int suspendType ) {
 }
 
 /*!
- * \b TQT_SLOT called to independent handleResumeSignal() from event loop and
+ * \b Slot called to independent handleResumeSignal() from event loop and
  * to avoid problems with the QT3 D-Bus bindings
  */
 void tdepowersave::forwardResumeSignal( int result ) {
@@ -2364,13 +2364,13 @@ void tdepowersave::forwardResumeSignal( int result ) {
 
 	resume_result = result;
 
-	TQTimer::singleShot(100, this, TQT_SLOT(handleResumeSignal()));
+	TQTimer::singleShot(100, this, TQ_SLOT(handleResumeSignal()));
 
 	kdDebugFuncOut(trace);
 }
 
 /*!
- * \b TQT_SLOT called if the machine suspend. Here we emit the related KNotify events
+ * \b Slot called if the machine suspend. Here we emit the related KNotify events
  * if they are not disabled.
  */
 void tdepowersave::handleResumeSignal() {
@@ -2493,7 +2493,7 @@ void tdepowersave::handleResumeSignal() {
 }
 
 /*!
- * \b TQT_SLOT called if the state of the current session change
+ * \b Slot called if the state of the current session change
  * \param state boolean represent the state of the session
  * TODO: fix scheme handling
  * TODO: fix critical battery situations (see the todo file in the source)
@@ -2896,7 +2896,7 @@ void tdepowersave::showDetailedDialog( ){
 		detailedIsShown = true;
 	}
 
-	connect(detailedDlg, TQT_SIGNAL(destroyed()), this, TQT_SLOT(closedetaileddialog()));
+	connect(detailedDlg, TQ_SIGNAL(destroyed()), this, TQ_SLOT(closedetaileddialog()));
 
 	kdDebugFuncOut(trace);
 }
diff --git a/src/tdepowersave.h b/src/tdepowersave.h
index 675850a..cb09e56 100644
--- a/src/tdepowersave.h
+++ b/src/tdepowersave.h
@@ -346,9 +346,9 @@ private slots:
 	void do_downDimm();
 	//! called if the user get active again and the display should get dimmed up
 	void do_upDimm();
-	//! TQT_SLOT do do the dimmining for autodimm feature
+	//! TQ_SLOT do do the dimmining for autodimm feature
 	void do_dimm();
-	//! TQT_SLOT to set autodimm related stuff and start autodimm monitoring
+	//! TQ_SLOT to set autodimm related stuff and start autodimm monitoring
 	void setAutoDimm( bool resumed );
 
 	//! to update the main menu of the kickerapplet