summaryrefslogtreecommitdiffstats
path: root/klaptopdaemon/apm.cpp
diff options
context:
space:
mode:
Diffstat (limited to 'klaptopdaemon/apm.cpp')
-rw-r--r--klaptopdaemon/apm.cpp80
1 files changed, 40 insertions, 40 deletions
diff --git a/klaptopdaemon/apm.cpp b/klaptopdaemon/apm.cpp
index ab25010..397bbb6 100644
--- a/klaptopdaemon/apm.cpp
+++ b/klaptopdaemon/apm.cpp
@@ -41,32 +41,32 @@
#include <kprocess.h>
// other Qt headers:
-#include <qlayout.h>
-#include <qlabel.h>
-#include <qcheckbox.h>
-#include <qhbox.h>
-#include <qvgroupbox.h>
-#include <qgrid.h>
-#include <qpushbutton.h>
-#include <qtooltip.h>
+#include <tqlayout.h>
+#include <tqlabel.h>
+#include <tqcheckbox.h>
+#include <tqhbox.h>
+#include <tqvgroupbox.h>
+#include <tqgrid.h>
+#include <tqpushbutton.h>
+#include <tqtooltip.h>
extern void wake_laptop_daemon();
-ApmConfig::ApmConfig (QWidget * parent, const char *name)
+ApmConfig::ApmConfig (TQWidget * parent, const char *name)
: KCModule(parent, name)
{
KGlobal::locale()->insertCatalogue("klaptopdaemon"); // For translation of klaptopdaemon messages
config = new KConfig("kcmlaptoprc");
- QVBoxLayout *top_layout = new QVBoxLayout( this, KDialog::marginHint(),
+ TQVBoxLayout *top_layout = new TQVBoxLayout( this, KDialog::marginHint(),
KDialog::spacingHint() );
- QLabel *tmp_label = new QLabel( i18n("This panel lets you configure your APM system and lets "
+ TQLabel *tmp_label = new TQLabel( i18n("This panel lets you configure your APM system and lets "
"you have access to some of the extra features provided by it"), this );
tmp_label->setAlignment( Qt::WordBreak );
top_layout->addWidget( tmp_label );
- tmp_label = new QLabel( i18n("NOTE: some APM implementations have buggy suspend/standby "
+ tmp_label = new TQLabel( i18n("NOTE: some APM implementations have buggy suspend/standby "
"implementations. You should test these features very gingerly - save "
"all your work, check them on and try a suspend/standby from "
"the popup menu on the battery icon in the panel if it fails to come "
@@ -74,28 +74,28 @@ ApmConfig::ApmConfig (QWidget * parent, const char *name)
tmp_label->setAlignment( Qt::WordBreak );
top_layout->addWidget( tmp_label );
- tmp_label = new QLabel( i18n("Some changes made on this page may require you to quit the laptop panel "
+ tmp_label = new TQLabel( i18n("Some changes made on this page may require you to quit the laptop panel "
"and start it again to take effect"), this );
tmp_label->setAlignment( Qt::WordBreak );
top_layout->addWidget( tmp_label );
bool can_enable = laptop_portable::has_apm(1); // is helper ready
- enableStandby = new QCheckBox( i18n("Enable standby"), this );
+ enableStandby = new TQCheckBox( i18n("Enable standby"), this );
top_layout->addWidget( enableStandby );
- QToolTip::add( enableStandby, i18n( "If checked this box enables transitions to the 'standby' state - a temporary powered down state" ) );
+ TQToolTip::add( enableStandby, i18n( "If checked this box enables transitions to the 'standby' state - a temporary powered down state" ) );
enableStandby->setEnabled(can_enable);
- connect( enableStandby, SIGNAL(clicked()), this, SLOT(configChanged()) );
+ connect( enableStandby, TQT_SIGNAL(clicked()), this, TQT_SLOT(configChanged()) );
- enableSuspend = new QCheckBox( i18n("Enable &suspend"), this );
+ enableSuspend = new TQCheckBox( i18n("Enable &suspend"), this );
top_layout->addWidget( enableSuspend );
- QToolTip::add( enableSuspend, i18n( "If checked this box enables transitions to the 'suspend' state - a semi-powered down state, sometimes called 'suspend-to-ram'" ) );
+ TQToolTip::add( enableSuspend, i18n( "If checked this box enables transitions to the 'suspend' state - a semi-powered down state, sometimes called 'suspend-to-ram'" ) );
enableSuspend->setEnabled(can_enable);
- connect( enableSuspend, SIGNAL(clicked()), this, SLOT(configChanged()) );
+ connect( enableSuspend, TQT_SIGNAL(clicked()), this, TQT_SLOT(configChanged()) );
apm_name = "/usr/bin/apm";
if (::access(apm_name, F_OK) != 0 && ::access("/usr/sbin/apm", F_OK) == 0)
apm_name = "/usr/sbin/apm";
- tmp_label = new QLabel(i18n("If the above boxes are disabled then there is no 'helper' "
+ tmp_label = new TQLabel(i18n("If the above boxes are disabled then there is no 'helper' "
"application set up to help change APM states, there are two "
"ways you can enable this application, either make the file "
"/proc/apm writeable by anyone every time your system boots "
@@ -103,35 +103,35 @@ ApmConfig::ApmConfig (QWidget * parent, const char *name)
"set-uid root").arg(apm_name), this );
tmp_label->setAlignment( Qt::WordBreak );
top_layout->addWidget( tmp_label );
- QHBoxLayout *ll = new QHBoxLayout(top_layout);
- QPushButton *setupButton = new QPushButton(i18n("Setup Helper Application"), this);
- connect( setupButton, SIGNAL(clicked()), this, SLOT(setupHelper()) );
- QToolTip::add( setupButton, i18n( "This button can be used to enable the APM helper application" ) );
+ TQHBoxLayout *ll = new TQHBoxLayout(top_layout);
+ TQPushButton *setupButton = new TQPushButton(i18n("Setup Helper Application"), this);
+ connect( setupButton, TQT_SIGNAL(clicked()), this, TQT_SLOT(setupHelper()) );
+ TQToolTip::add( setupButton, i18n( "This button can be used to enable the APM helper application" ) );
ll->addStretch(2);
ll->addWidget(setupButton);
ll->addStretch(8);
if (laptop_portable::has_software_suspend()) {
- tmp_label = new QLabel( i18n("Your system seems to have 'Software Suspend' installed, this can "
+ tmp_label = new TQLabel( i18n("Your system seems to have 'Software Suspend' installed, this can "
"be used to hibernate or 'suspend to disk' your system if you want "
"to use this for hibernation check the box below"), this );
tmp_label->setAlignment( Qt::WordBreak );
top_layout->addWidget( tmp_label );
- enableSoftwareSuspendHibernate = new QCheckBox( i18n("Enable software suspend for hibernate"), this );
+ enableSoftwareSuspendHibernate = new TQCheckBox( i18n("Enable software suspend for hibernate"), this );
top_layout->addWidget( enableSoftwareSuspendHibernate );
- QToolTip::add( enableSoftwareSuspendHibernate, i18n( "If checked this box enables transitions to the 'hibernate' state using the 'Software Suspend' mechanism" ) );
+ TQToolTip::add( enableSoftwareSuspendHibernate, i18n( "If checked this box enables transitions to the 'hibernate' state using the 'Software Suspend' mechanism" ) );
enableSoftwareSuspendHibernate->setEnabled(laptop_portable::has_software_suspend(2));
- connect( enableSoftwareSuspendHibernate, SIGNAL(clicked()), this, SLOT(configChanged()) );
- tmp_label = new QLabel( i18n("If the above box is disabled then you need to be logged in "
+ connect( enableSoftwareSuspendHibernate, TQT_SIGNAL(clicked()), this, TQT_SLOT(configChanged()) );
+ tmp_label = new TQLabel( i18n("If the above box is disabled then you need to be logged in "
"as root or need a helper application to invoke the Software "
"Suspend utility - KDE provides a utility to do this, if you "
"wish to use it you must make it set-uid root, the button "
"below will do this for you"), this );
tmp_label->setAlignment( Qt::WordBreak );
top_layout->addWidget( tmp_label );
- ll = new QHBoxLayout(this);
- QPushButton *setupSSButton = new QPushButton(i18n("Setup SS Helper Application"), this);
- connect( setupSSButton, SIGNAL(clicked()), this, SLOT(setupHelper2()) );
- QToolTip::add( setupSSButton, i18n( "This button can be used to enable the Software Suspend helper application" ) );
+ ll = new TQHBoxLayout(this);
+ TQPushButton *setupSSButton = new TQPushButton(i18n("Setup SS Helper Application"), this);
+ connect( setupSSButton, TQT_SIGNAL(clicked()), this, TQT_SLOT(setupHelper2()) );
+ TQToolTip::add( setupSSButton, i18n( "This button can be used to enable the Software Suspend helper application" ) );
ll->addStretch(2);
ll->addWidget(setupSSButton);
ll->addStretch(8);
@@ -141,7 +141,7 @@ ApmConfig::ApmConfig (QWidget * parent, const char *name)
top_layout->addStretch(1);
- top_layout->addWidget( new QLabel( i18n("Version: %1").arg(LAPTOP_VERSION), this), 0, Qt::AlignRight );
+ top_layout->addWidget( new TQLabel( i18n("Version: %1").arg(LAPTOP_VERSION), this), 0, Qt::AlignRight );
load();
@@ -154,7 +154,7 @@ ApmConfig::~ApmConfig()
void ApmConfig::setupHelper()
{
- QString kdesu = KStandardDirs::findExe("kdesu");
+ TQString kdesu = KStandardDirs::findExe("kdesu");
if (!kdesu.isEmpty()) {
int rc = KMessageBox::warningContinueCancel(0,
i18n("You will need to supply a root password "
@@ -166,11 +166,11 @@ void ApmConfig::setupHelper()
proc << kdesu;
proc << "-u";
proc << "root";
- proc << QString("dpkg-statoverride --update --add root root 6755 ")+apm_name;
+ proc << TQString("dpkg-statoverride --update --add root root 6755 ")+apm_name;
proc.start(KProcess::Block); // run it sync so has_apm below sees the results
}
} else {
- KMessageBox::sorry(0, i18n("%1 cannot be enabled because kdesu cannot be found. Please make sure that it is installed correctly.").arg(QString(apm_name)),
+ KMessageBox::sorry(0, i18n("%1 cannot be enabled because kdesu cannot be found. Please make sure that it is installed correctly.").arg(TQString(apm_name)),
i18n("KLaptopDaemon"));
}
laptop_portable::apm_set_mask(enablestandby, enablesuspend);
@@ -185,10 +185,10 @@ void ApmConfig::setupHelper()
void ApmConfig::setupHelper2() // we use the acpi helper to do software suspend
{
unsigned long len, crc;
- QString helper = KStandardDirs::findExe("klaptop_acpi_helper");
+ TQString helper = KStandardDirs::findExe("klaptop_acpi_helper");
checkcrc(helper.latin1(), len, crc);
- QString kdesu = KStandardDirs::findExe("kdesu");
+ TQString kdesu = KStandardDirs::findExe("kdesu");
if (!kdesu.isEmpty()) {
int rc = KMessageBox::warningContinueCancel(0,
i18n("You will need to supply a root password "
@@ -266,7 +266,7 @@ void ApmConfig::configChanged()
}
-QString ApmConfig::quickHelp() const
+TQString ApmConfig::quickHelp() const
{
return i18n("<h1>APM Setup</h1>This module allows you to configure APM for your system");
}
generated by cgit v1.2.1 (git 2.18.0) at 2024-12-12 05:53:44 +0000