diff options
Diffstat (limited to 'klaptopdaemon/buttons.cpp')
| -rw-r--r-- | klaptopdaemon/buttons.cpp | 178 |
1 files changed, 89 insertions, 89 deletions
diff --git a/klaptopdaemon/buttons.cpp b/klaptopdaemon/buttons.cpp index f9ccce4..3c05359 100644 --- a/klaptopdaemon/buttons.cpp +++ b/klaptopdaemon/buttons.cpp @@ -34,17 +34,17 @@ #include <kapplication.h> #include <kcombobox.h> -#include <qlayout.h> -#include <qvbuttongroup.h> -#include <qspinbox.h> -#include <qradiobutton.h> -#include <qcheckbox.h> -#include <qhbox.h> -#include <qslider.h> -#include <qtooltip.h> +#include <tqlayout.h> +#include <tqvbuttongroup.h> +#include <tqspinbox.h> +#include <tqradiobutton.h> +#include <tqcheckbox.h> +#include <tqhbox.h> +#include <tqslider.h> +#include <tqtooltip.h> extern void wake_laptop_daemon(); -ButtonsConfig::ButtonsConfig (QWidget * parent, const char *name) +ButtonsConfig::ButtonsConfig (TQWidget * parent, const char *name) : KCModule(parent, name), lidBox(0), lidStandby(0), @@ -82,16 +82,16 @@ ButtonsConfig::ButtonsConfig (QWidget * parent, const char *name) apm = laptop_portable::has_power_management(); config = new KConfig("kcmlaptoprc"); int can_brightness = laptop_portable::has_brightness(); - QStringList throttle_list; + TQStringList throttle_list; int current_throttle; bool *active_list; bool has_throttle = laptop_portable::get_system_throttling(0, current_throttle, throttle_list, active_list); - QStringList performance_list; + TQStringList performance_list; int current_performance; bool has_performance = laptop_portable::get_system_performance(0, current_performance, performance_list, active_list); if (!apm && !can_brightness && !has_throttle && !has_performance) { - QVBoxLayout *top_layout = new QVBoxLayout(this, KDialog::marginHint(), + TQVBoxLayout *top_layout = new TQVBoxLayout(this, KDialog::marginHint(), KDialog::spacingHint()); KActiveLabel* explain = laptop_portable::no_power_management_explanation(this); @@ -106,170 +106,170 @@ ButtonsConfig::ButtonsConfig (QWidget * parent, const char *name) if (!can_standby && !can_suspend && !can_hibernate && !can_brightness && !has_throttle && !has_performance) apm = 0; if (!apm) { - QVBoxLayout *top_layout = new QVBoxLayout(this, KDialog::marginHint(), + TQVBoxLayout *top_layout = new TQVBoxLayout(this, KDialog::marginHint(), KDialog::spacingHint()); - QLabel* explain = laptop_portable::how_to_do_suspend_resume(this); + TQLabel* explain = laptop_portable::how_to_do_suspend_resume(this); top_layout->addWidget(explain); top_layout->addStretch(1); } else { - QVBoxLayout *top_layout = new QVBoxLayout(this, KDialog::marginHint(), + TQVBoxLayout *top_layout = new TQVBoxLayout(this, KDialog::marginHint(), KDialog::spacingHint()); - QHBoxLayout *hlay = new QHBoxLayout( top_layout ); + TQHBoxLayout *hlay = new TQHBoxLayout( top_layout ); if (laptop_portable::has_button(laptop_portable::LidButton)) { - lidBox = new QVButtonGroup(i18n("Lid Switch Closed"), this); + lidBox = new TQVButtonGroup(i18n("Lid Switch Closed"), this); lidBox->layout()->setSpacing( KDialog::spacingHint() ); - QToolTip::add( lidBox, i18n( "Select which actions will occur when the laptop's lid is closed" ) ); + TQToolTip::add( lidBox, i18n( "Select which actions will occur when the laptop's lid is closed" ) ); hlay->addWidget( lidBox ); if (can_standby) { - lidStandby = new QRadioButton(i18n("Standb&y"), lidBox); - QToolTip::add( lidStandby, i18n( "Causes the laptop to move into the standby temporary low-power state" ) ); + lidStandby = new TQRadioButton(i18n("Standb&y"), lidBox); + TQToolTip::add( lidStandby, i18n( "Causes the laptop to move into the standby temporary low-power state" ) ); } if (can_suspend) { - lidSuspend = new QRadioButton(i18n("&Suspend"), lidBox); - QToolTip::add( lidSuspend, i18n( "Causes the laptop to move into the suspend 'save-to-ram' state" ) ); + lidSuspend = new TQRadioButton(i18n("&Suspend"), lidBox); + TQToolTip::add( lidSuspend, i18n( "Causes the laptop to move into the suspend 'save-to-ram' state" ) ); } if (can_hibernate) { - lidHibernate = new QRadioButton(i18n("H&ibernate"), lidBox); - QToolTip::add( lidHibernate, i18n( "Causes the laptop to move into the hibernate 'save-to-disk' state" ) ); + lidHibernate = new TQRadioButton(i18n("H&ibernate"), lidBox); + TQToolTip::add( lidHibernate, i18n( "Causes the laptop to move into the hibernate 'save-to-disk' state" ) ); } if (can_shutdown) { - lidShutdown = new QRadioButton(i18n("System power off"), lidBox); - QToolTip::add( lidShutdown, i18n( "Causes the laptop to power down" ) ); + lidShutdown = new TQRadioButton(i18n("System power off"), lidBox); + TQToolTip::add( lidShutdown, i18n( "Causes the laptop to power down" ) ); } if (can_logout) { - lidLogout = new QRadioButton(i18n("Logout"), lidBox); - QToolTip::add( lidShutdown, i18n( "Causes you to be logged out" ) ); + lidLogout = new TQRadioButton(i18n("Logout"), lidBox); + TQToolTip::add( lidShutdown, i18n( "Causes you to be logged out" ) ); } if (can_suspend||can_standby||can_hibernate||can_shutdown||can_logout) - lidOff = new QRadioButton(i18n("&Off"), lidBox); + lidOff = new TQRadioButton(i18n("&Off"), lidBox); if (can_brightness) { - lidBrightness = new QCheckBox(i18n("Brightness"), lidBox); - QToolTip::add( lidBrightness, i18n( "Causes the back panel brightness to be set" ) ); - QWidget *wp = new QWidget(lidBox); - QHBoxLayout *xl = new QHBoxLayout( wp); - xl->addWidget(new QLabel("-", wp)); - lidValBrightness = new QSlider(0, 255, 16, 255, Qt::Horizontal, wp); + lidBrightness = new TQCheckBox(i18n("Brightness"), lidBox); + TQToolTip::add( lidBrightness, i18n( "Causes the back panel brightness to be set" ) ); + TQWidget *wp = new TQWidget(lidBox); + TQHBoxLayout *xl = new TQHBoxLayout( wp); + xl->addWidget(new TQLabel("-", wp)); + lidValBrightness = new TQSlider(0, 255, 16, 255, Qt::Horizontal, wp); lidValBrightness->setEnabled(0); - QToolTip::add( lidValBrightness, i18n( "How bright the back panel will be set to" ) ); - connect (lidValBrightness, SIGNAL(valueChanged(int)), this, SLOT(configChanged())); + TQToolTip::add( lidValBrightness, i18n( "How bright the back panel will be set to" ) ); + connect (lidValBrightness, TQT_SIGNAL(valueChanged(int)), this, TQT_SLOT(configChanged())); xl->addWidget(lidValBrightness); - xl->addWidget(new QLabel("+", wp)); + xl->addWidget(new TQLabel("+", wp)); xl->addStretch(1); } if (has_performance) { - lidPerformance = new QCheckBox(i18n("System performance"), lidBox); - QToolTip::add( lidPerformance, i18n( "Causes the performance profile to be changed" ) ); + lidPerformance = new TQCheckBox(i18n("System performance"), lidBox); + TQToolTip::add( lidPerformance, i18n( "Causes the performance profile to be changed" ) ); - QWidget *wp = new QWidget(lidBox); - QHBoxLayout *xl = new QHBoxLayout( wp); + TQWidget *wp = new TQWidget(lidBox); + TQHBoxLayout *xl = new TQHBoxLayout( wp); lidValPerformance = new KComboBox(0, wp); - QToolTip::add( lidValPerformance, i18n( "The performance profile to switch to" ) ); + TQToolTip::add( lidValPerformance, i18n( "The performance profile to switch to" ) ); lidValPerformance->insertStringList(performance_list); lidValPerformance->setEnabled(0); - connect (lidValPerformance, SIGNAL(activated(int)), this, SLOT(configChanged())); + connect (lidValPerformance, TQT_SIGNAL(activated(int)), this, TQT_SLOT(configChanged())); xl->addWidget(lidValPerformance); xl->addStretch(1); } if (has_throttle) { - lidThrottle = new QCheckBox(i18n("CPU throttle"), lidBox); - QToolTip::add( lidThrottle, i18n( "Causes the CPU to be throttled back" ) ); + lidThrottle = new TQCheckBox(i18n("CPU throttle"), lidBox); + TQToolTip::add( lidThrottle, i18n( "Causes the CPU to be throttled back" ) ); - QWidget *wp = new QWidget(lidBox); - QHBoxLayout *xl = new QHBoxLayout( wp); + TQWidget *wp = new TQWidget(lidBox); + TQHBoxLayout *xl = new TQHBoxLayout( wp); lidValThrottle = new KComboBox(0, wp); - QToolTip::add( lidValThrottle, i18n( "How much to throttle back the CPU" ) ); + TQToolTip::add( lidValThrottle, i18n( "How much to throttle back the CPU" ) ); lidValThrottle->insertStringList(throttle_list); lidValThrottle->setEnabled(0); - connect (lidValThrottle, SIGNAL(activated(int)), this, SLOT(configChanged())); + connect (lidValThrottle, TQT_SIGNAL(activated(int)), this, TQT_SLOT(configChanged())); xl->addWidget(lidValThrottle); xl->addStretch(1); } - connect(lidBox, SIGNAL(clicked(int)), this, SLOT(configChanged())); + connect(lidBox, TQT_SIGNAL(clicked(int)), this, TQT_SLOT(configChanged())); } if (laptop_portable::has_button(laptop_portable::PowerButton)) { - powerBox = new QVButtonGroup(i18n("Power Switch Pressed"), this); + powerBox = new TQVButtonGroup(i18n("Power Switch Pressed"), this); powerBox->layout()->setSpacing( KDialog::spacingHint() ); - QToolTip::add( powerBox, i18n( "Select which actions will occur when the laptop's power button is pressed" ) ); + TQToolTip::add( powerBox, i18n( "Select which actions will occur when the laptop's power button is pressed" ) ); hlay->addWidget( powerBox ); if (can_standby) { - powerStandby = new QRadioButton(i18n("Sta&ndby"), powerBox); - QToolTip::add( powerStandby, i18n( "Causes the laptop to move into the standby temporary low-power state" ) ); + powerStandby = new TQRadioButton(i18n("Sta&ndby"), powerBox); + TQToolTip::add( powerStandby, i18n( "Causes the laptop to move into the standby temporary low-power state" ) ); } if (can_suspend) { - powerSuspend = new QRadioButton(i18n("S&uspend"), powerBox); - QToolTip::add( powerSuspend, i18n( "Causes the laptop to move into the suspend 'save-to-ram' state" ) ); + powerSuspend = new TQRadioButton(i18n("S&uspend"), powerBox); + TQToolTip::add( powerSuspend, i18n( "Causes the laptop to move into the suspend 'save-to-ram' state" ) ); } if (can_hibernate) { - powerHibernate = new QRadioButton(i18n("Hi&bernate"), powerBox); - QToolTip::add( powerHibernate, i18n( "Causes the laptop to move into the hibernate 'save-to-disk' state" ) ); + powerHibernate = new TQRadioButton(i18n("Hi&bernate"), powerBox); + TQToolTip::add( powerHibernate, i18n( "Causes the laptop to move into the hibernate 'save-to-disk' state" ) ); } if (can_shutdown) { - powerShutdown = new QRadioButton(i18n("System power off"), powerBox); - QToolTip::add( powerShutdown, i18n( "Causes the laptop to power down" ) ); + powerShutdown = new TQRadioButton(i18n("System power off"), powerBox); + TQToolTip::add( powerShutdown, i18n( "Causes the laptop to power down" ) ); } if (can_logout) { - powerLogout = new QRadioButton(i18n("Logout"), powerBox); - QToolTip::add( powerShutdown, i18n( "Causes you to be logged out" ) ); + powerLogout = new TQRadioButton(i18n("Logout"), powerBox); + TQToolTip::add( powerShutdown, i18n( "Causes you to be logged out" ) ); } if (can_suspend||can_standby||can_hibernate||can_shutdown||can_logout) - powerOff = new QRadioButton(i18n("O&ff"), powerBox); + powerOff = new TQRadioButton(i18n("O&ff"), powerBox); if (can_brightness) { - powerBrightness = new QCheckBox(i18n("Brightness"), powerBox); - QToolTip::add( powerBrightness, i18n( "Causes the back panel brightness to be set" ) ); - QWidget *wp = new QWidget(powerBox); - QHBoxLayout *xl = new QHBoxLayout( wp); - xl->addWidget(new QLabel("-", wp)); - powerValBrightness = new QSlider(0, 255, 16, 255, Qt::Horizontal, wp); - QToolTip::add( powerValBrightness, i18n( "How bright the back panel will be set to" ) ); + powerBrightness = new TQCheckBox(i18n("Brightness"), powerBox); + TQToolTip::add( powerBrightness, i18n( "Causes the back panel brightness to be set" ) ); + TQWidget *wp = new TQWidget(powerBox); + TQHBoxLayout *xl = new TQHBoxLayout( wp); + xl->addWidget(new TQLabel("-", wp)); + powerValBrightness = new TQSlider(0, 255, 16, 255, Qt::Horizontal, wp); + TQToolTip::add( powerValBrightness, i18n( "How bright the back panel will be set to" ) ); powerValBrightness->setEnabled(0); - connect (powerValBrightness, SIGNAL(valueChanged(int)), this, SLOT(configChanged())); + connect (powerValBrightness, TQT_SIGNAL(valueChanged(int)), this, TQT_SLOT(configChanged())); xl->addWidget(powerValBrightness); - xl->addWidget(new QLabel("+", wp)); + xl->addWidget(new TQLabel("+", wp)); xl->addStretch(1); } if (has_performance) { - powerPerformance = new QCheckBox(i18n("System performance"), powerBox); - QToolTip::add( powerPerformance, i18n( "Causes the performance profile to be changed" ) ); + powerPerformance = new TQCheckBox(i18n("System performance"), powerBox); + TQToolTip::add( powerPerformance, i18n( "Causes the performance profile to be changed" ) ); - QWidget *wp = new QWidget(powerBox); - QHBoxLayout *xl = new QHBoxLayout( wp); + TQWidget *wp = new TQWidget(powerBox); + TQHBoxLayout *xl = new TQHBoxLayout( wp); powerValPerformance = new KComboBox(0, wp); - QToolTip::add( powerValPerformance, i18n( "The performance profile to switch to" ) ); + TQToolTip::add( powerValPerformance, i18n( "The performance profile to switch to" ) ); powerValPerformance->insertStringList(performance_list); powerValPerformance->setEnabled(0); - connect (powerValPerformance, SIGNAL(activated(int)), this, SLOT(configChanged())); + connect (powerValPerformance, TQT_SIGNAL(activated(int)), this, TQT_SLOT(configChanged())); xl->addWidget(powerValPerformance); xl->addStretch(1); } if (has_throttle) { - powerThrottle = new QCheckBox(i18n("CPU throttle"), powerBox); - QToolTip::add( powerThrottle, i18n( "Causes the CPU to be throttled back" ) ); + powerThrottle = new TQCheckBox(i18n("CPU throttle"), powerBox); + TQToolTip::add( powerThrottle, i18n( "Causes the CPU to be throttled back" ) ); - QWidget *wp = new QWidget(powerBox); - QHBoxLayout *xl = new QHBoxLayout( wp); + TQWidget *wp = new TQWidget(powerBox); + TQHBoxLayout *xl = new TQHBoxLayout( wp); powerValThrottle = new KComboBox(0, wp); - QToolTip::add( powerValThrottle, i18n( "How much to throttle back the CPU" ) ); + TQToolTip::add( powerValThrottle, i18n( "How much to throttle back the CPU" ) ); powerValThrottle->insertStringList(throttle_list); powerValThrottle->setEnabled(0); - connect (powerValThrottle, SIGNAL(activated(int)), this, SLOT(configChanged())); + connect (powerValThrottle, TQT_SIGNAL(activated(int)), this, TQT_SLOT(configChanged())); xl->addWidget(powerValThrottle); xl->addStretch(1); } - connect(powerBox, SIGNAL(clicked(int)), this, SLOT(configChanged())); + connect(powerBox, TQT_SIGNAL(clicked(int)), this, TQT_SLOT(configChanged())); } hlay->addStretch(1); - QLabel* explain = new QLabel(i18n("This panel enables actions that are triggered when the lid closure switch " + TQLabel* explain = new TQLabel(i18n("This panel enables actions that are triggered when the lid closure switch " "or power switch on your laptop is pressed. Some laptops may already " "automatically do things like this, if you cannot disable them in your BIOS " "you probably should not enable anything in this panel."), this); @@ -278,7 +278,7 @@ ButtonsConfig::ButtonsConfig (QWidget * parent, const char *name) top_layout->addStretch(1); - top_layout->addWidget( new QLabel( i18n("Version: %1").arg(LAPTOP_VERSION), this ), 0, Qt::AlignRight ); + top_layout->addWidget( new TQLabel( i18n("Version: %1").arg(LAPTOP_VERSION), this ), 0, Qt::AlignRight ); } } @@ -609,7 +609,7 @@ void ButtonsConfig::configChanged() } -QString ButtonsConfig::quickHelp() const +TQString ButtonsConfig::quickHelp() const { return i18n("<h1>Laptop Power Control</h1>This module allows you to " "configure the power switch or lid closure switch on your laptop " |