Revert "Rename a number of old tq methods that are no longer tq specific"

This reverts commit b6ba5d642f3fc7d320e3d6f4650eb259a3a52b04.

1 files changed, 29 insertions, 29 deletions

diff --git a/languages/cpp/debugger/gdbcontroller.cpp b/languages/cpp/debugger/gdbcontroller.cpp
index b0c3171e..ab7ffe69 100644
--- a/languages/cpp/debugger/gdbcontroller.cpp
+++ b/languages/cpp/debugger/gdbcontroller.cpp
@@ -294,7 +294,7 @@ void GDBController::queueCmd(GDBCommand *cmd, enum queue_where queue_where)
         KMessageBox::information(
             0,
             i18n("<b>Gdb command sent when debugger is not running</b><br>"
-            "The command was:<br> %1").arg(cmd->initialString()),
+            "The command was:<br> %1").tqarg(cmd->initialString()),
             i18n("Internal error"), "gdb_error");
         return;
     }
@@ -320,7 +320,7 @@ void GDBController::queueCmd(GDBCommand *cmd, enum queue_where queue_where)
                   << (stateReloadInProgress_ ? " (state reloading)\n" : "\n");
 
     setStateOn(s_dbgBusy);
-    emit dbgStatus("", state_);
+    emit dbgtqStatus("", state_);
     raiseEvent(debugger_busy);
 
     executeCmd();
@@ -409,7 +409,7 @@ void GDBController::executeCmd()
     else
         emit gdbInternalCommandStdout( prettyCmd.latin1() );
 
-    emit dbgStatus ("", state_);
+    emit dbgtqStatus ("", state_);
 }
 
 // **************************************************************************
@@ -500,7 +500,7 @@ void GDBController::actOnProgramPauseMI(const GDBMI::ResultRecord& r)
     if (reason == "exited-signalled")
     {
         programNoApp(i18n("Exited on signal %1")
-                     .arg(r["signal-name"].literal()), false);
+                     .tqarg(r["signal-name"].literal()), false);
         // FIXME: figure out why this variable is needed.
         programHasExited_ = true;
         state_reload_needed = false;
@@ -540,7 +540,7 @@ void GDBController::actOnProgramPauseMI(const GDBMI::ResultRecord& r)
             // or whatever).
 
             setStateOff(s_explicitBreakInto);
-            emit dbgStatus("Application interrupted", state_);
+            emit dbgtqStatus("Application interrupted", state_);
             // Will show the source line in the code
             // handling non-special stop kinds, below.
         }
@@ -554,7 +554,7 @@ void GDBController::actOnProgramPauseMI(const GDBMI::ResultRecord& r)
             // that'll end the program.
             KMessageBox::information(0,
                                      i18n("Program received signal %1 (%2)")
-                                     .arg(name).arg(user_name),
+                                     .tqarg(name).tqarg(user_name),
                                      i18n("Received signal"));
         }
     }
@@ -592,7 +592,7 @@ void GDBController::reloadProgramState()
         maybeAnnounceWatchpointHit();
     }
 
-    emit dbgStatus ("", state_);
+    emit dbgtqStatus ("", state_);
 
     // We're always at frame zero when the program stops
     // and we must reset the active flag
@@ -648,7 +648,7 @@ void GDBController::programNoApp(const TQString &msg, bool msgBox)
     if (msgBox)
         KMessageBox::information(0, i18n("gdb message:\n")+msg,"Warning", "gdb_error");
 
-    emit dbgStatus (msg, state_);
+    emit dbgtqStatus (msg, state_);
     /* Also show message in gdb window, so that users who
        prefer to look at gdb window know what's up.  */
     emit gdbUserCommandStdout(msg.ascii());
@@ -716,9 +716,9 @@ void GDBController::handleMiFileListExecSourceFile(const GDBMI::ResultRecord& r)
                  "Command was: %1\n"
                  "Response is: %2\n"
                  "Invalid response kind: \"%3\"")
-            .arg(currentCmd_->rawDbgCommand())
-            .arg(buf)
-            .arg(r.reason),
+            .tqarg(currentCmd_->rawDbgCommand())
+            .tqarg(buf)
+            .tqarg(r.reason),
             i18n("Invalid gdb reply"), "gdb_error");
 #endif
     }
@@ -755,7 +755,7 @@ void GDBController::maybeAnnounceWatchpointHit()
         }
         else if (last_stop_reason == "read-watchpoint-trigger")
         {
-            emit dbgStatus ("Read watchpoint triggered", state_);
+            emit dbgtqStatus ("Read watchpoint triggered", state_);
         }
     }
 }
@@ -846,14 +846,14 @@ bool GDBController::start(const TQString& shell, const DomUtil::PairList& run_en
             i18n("<b>Could not start debugger.</b>"
                  "<p>Could not run '%1'. "
                  "Make sure that the path name is specified correctly."
-                ).arg(dbgProcess_->args()[0].data()),
+                ).tqarg(dbgProcess_->args()[0].data()),
             i18n("Could not start debugger"), "gdb_error");
 
         return false;
     }
 
     setStateOff(s_dbgNotStarted);
-    emit dbgStatus ("", state_);
+    emit dbgtqStatus ("", state_);
 
     saw_gdb_prompt_ = false;
 
@@ -1043,7 +1043,7 @@ void GDBController::slotStopDebugger()
     gdbOutput_ = "";
 
     setState(s_dbgNotStarted | s_appNotStarted);
-    emit dbgStatus (i18n("Debugger stopped"), state_);
+    emit dbgtqStatus (i18n("Debugger stopped"), state_);
 
     raiseEvent(debugger_exited);
 }
@@ -1159,7 +1159,7 @@ void GDBController::slotRun()
                          "    %1\n"
                          "<br>does not exist. Check that you have specified "
                          "the right application in the debugger configuration."
-                        ).arg(app.fileName()),
+                        ).tqarg(app.fileName()),
                     i18n("Application does not exist"));
 
                 // FIXME: after this, KDevelop will still show that debugger
@@ -1176,7 +1176,7 @@ void GDBController::slotRun()
                          "<p>The application does not have the executable bit set. "
                          "Try rebuilding the project, or change permissions "
                          "manually."
-                        ).arg(app.fileName()),
+                        ).tqarg(app.fileName()),
                     i18n("Could not run application"));
                 slotStopDebugger();
             }
@@ -1324,11 +1324,11 @@ void GDBController::selectFrame(int frameNo, int threadNo)
     {
         if (viewedThread_ != threadNo)
             queueCmd(new GDBCommand(
-                         TQString("-thread-select %1").arg(threadNo).ascii()));
+                         TQString("-thread-select %1").tqarg(threadNo).ascii()));
     }
 
     queueCmd(new GDBCommand(
-                 TQString("-stack-select-frame %1").arg(frameNo).ascii()));
+                 TQString("-stack-select-frame %1").tqarg(frameNo).ascii()));
 
     // Will emit the 'thread_or_frame_changed' event.
     queueCmd(new GDBCommand("-stack-info-frame",
@@ -1352,7 +1352,7 @@ void GDBController::defaultErrorHandler(const GDBMI::ResultRecord& result)
     if (msg.contains("No such process"))
     {
         setState(s_appNotStarted|s_programExited);
-        emit dbgStatus (i18n("Process exited"), state_);
+        emit dbgtqStatus (i18n("Process exited"), state_);
         raiseEvent(program_exited);
         return;
     }
@@ -1590,7 +1590,7 @@ void GDBController::slotDbgStdout(KProcess *, char *buf, int buflen)
                      "<p>The debugger component encountered an internal error while "
                      "processing a reply from gdb. Please submit a bug report."),
                 i18n("The exception is: %1\n"
-                     "The MI response is: %2").arg(e.what()).arg(reply.data()),
+                     "The MI response is: %2").tqarg(e.what()).tqarg(reply.data()),
                 i18n("Internal debugger error"));
 
             destroyCurrentCommand();
@@ -1629,7 +1629,7 @@ void GDBController::commandDone()
     {
         kdDebug(9012) << "No more commands\n";
         setStateOff(s_dbgBusy);
-        emit dbgStatus("", state_);
+        emit dbgtqStatus("", state_);
         raiseEvent(debugger_ready);
     }
 }
@@ -1688,7 +1688,7 @@ void GDBController::raiseEvent(event_t e)
 void GDBController::slotDbgStderr(KProcess *proc, char *buf, int buflen)
 {
     // At the moment, just drop a message out and redirect
-    kdDebug(9012) << "STDERR: " << TQString::fromLatin1(buf, buflen+1) << endl;
+    kdDebug(9012) << "STDERR: " << TQString::tqfromLatin1(buf, buflen+1) << endl;
     slotDbgStdout(proc, buf, buflen);
 }
 
@@ -1722,7 +1722,7 @@ void GDBController::slotDbgProcessExited(KProcess* process)
 
     destroyCmds();
     setState(s_dbgNotStarted|s_appNotStarted|s_programExited);
-    emit dbgStatus (i18n("Process exited"), state_);
+    emit dbgtqStatus (i18n("Process exited"), state_);
 
     emit gdbUserCommandStdout("(gdb) Process exited\n");
 }
@@ -1743,14 +1743,14 @@ void GDBController::slotUserGDBCmd(const TQString& cmd)
     //    raiseEvent(program_state_changed);
 }
 
-void GDBController::explainDebuggerStatus()
+void GDBController::explainDebuggertqStatus()
 {
     TQString information("%1 commands in queue\n"
                         "%2 commands being processed by gdb\n"
                         "Debugger state: %3\n");
     information =
-        information.arg(cmdList_.count()).arg(currentCmd_ ? 1 : 0)
-        .arg(state_);
+        information.tqarg(cmdList_.count()).tqarg(currentCmd_ ? 1 : 0)
+        .tqarg(state_);
 
     if (currentCmd_)
     {
@@ -1758,8 +1758,8 @@ void GDBController::explainDebuggerStatus()
                       "Current command text: '%2'\n"
                       "Current command origianl text: '%3'\n");
 
-        extra = extra.arg(
-            typeid(*currentCmd_).name()).arg(currentCmd_->cmdToSend()).
+        extra = extra.tqarg(
+            typeid(*currentCmd_).name()).tqarg(currentCmd_->cmdToSend()).
             arg(currentCmd_->initialString());
         information += extra;
     }