Trinity Qt initial conversion

git-svn-id: svn://anonsvn.kde.org/home/kde/branches/trinity/kdevelop@1157658 283d02a7-25f6-0310-bc7c-ecb5cbfe19da

1 files changed, 184 insertions, 184 deletions

diff --git a/parts/appwizard/appwizarddlg.cpp b/parts/appwizard/appwizarddlg.cpp
index 816786ff..3d854ba0 100644
--- a/parts/appwizard/appwizarddlg.cpp
+++ b/parts/appwizard/appwizarddlg.cpp
@@ -13,26 +13,26 @@
 
 #include "appwizarddlg.h"
 
-#include <qvbox.h>
-#include <qbuttongroup.h>
-#include <qcombobox.h>
-#include <qtabwidget.h>
-#include <qwidgetstack.h>
-#include <qdir.h>
-#include <qfileinfo.h>
-#include <qgrid.h>
-#include <qheader.h>
-#include <qmap.h>
-#include <qmultilineedit.h>
-#include <qpushbutton.h>
-#include <qradiobutton.h>
-#include <qregexp.h>
-#include <qtextstream.h>
-#include <qtextview.h>
-#include <qtoolbutton.h>
-#include <qtooltip.h>
-#include <qvalidator.h>
-#include <qtimer.h>
+#include <tqvbox.h>
+#include <tqbuttongroup.h>
+#include <tqcombobox.h>
+#include <tqtabwidget.h>
+#include <tqwidgetstack.h>
+#include <tqdir.h>
+#include <tqfileinfo.h>
+#include <tqgrid.h>
+#include <tqheader.h>
+#include <tqmap.h>
+#include <tqmultilineedit.h>
+#include <tqpushbutton.h>
+#include <tqradiobutton.h>
+#include <tqregexp.h>
+#include <tqtextstream.h>
+#include <tqtextview.h>
+#include <tqtoolbutton.h>
+#include <tqtooltip.h>
+#include <tqvalidator.h>
+#include <tqtimer.h>
 #include <klistview.h>
 #include <kiconview.h>
 #include <kconfig.h>
@@ -53,7 +53,7 @@
 #include <ktrader.h>
 #include <kparts/componentfactory.h>
 #include <kio/netaccess.h>
-#include <qfile.h>
+#include <tqfile.h>
 #include <kmacroexpander.h>
 #include <karchive.h>
 #include <ktar.h>
@@ -61,7 +61,7 @@
 #include <kfileitem.h>
 #include <kio/chmodjob.h>
 
-#include <qlayout.h>
+#include <tqlayout.h>
 
 #include "domutil.h"
 #include "kdevversioncontrol.h"
@@ -90,7 +90,7 @@
 #include "propeditor/propertylist.h"
 #include "propeditor/propertyeditor.h"
 
-AppWizardDialog::AppWizardDialog(AppWizardPart *part, QWidget *parent, const char *name)
+AppWizardDialog::AppWizardDialog(AppWizardPart *part, TQWidget *parent, const char *name)
     : AppWizardDialogBase(parent, name,true), m_pCurrentAppInfo(0),
 	m_profileSupport(new ProfileSupport(part))
 {
@@ -98,17 +98,17 @@ AppWizardDialog::AppWizardDialog(AppWizardPart *part, QWidget *parent, const cha
 
 	m_customOptions = 0L;
 	loadLicenses();
-    connect( this, SIGNAL( selected( const QString & ) ), this, SLOT( pageChanged() ) );
+    connect( this, TQT_SIGNAL( selected( const TQString & ) ), this, TQT_SLOT( pageChanged() ) );
 
 	helpButton()->hide();
     templates_listview->header()->hide();
-	templates_listview->setColumnWidthMode(0, QListView::Maximum);	//to provide horiz scrollbar.
+	templates_listview->setColumnWidthMode(0, TQListView::Maximum);	//to provide horiz scrollbar.
 
 	m_templatesMenu = new KPopupMenu(templates_listview);
-	m_templatesMenu->insertItem(i18n("&Add to Favorites"), this, SLOT(addTemplateToFavourites()));
+	m_templatesMenu->insertItem(i18n("&Add to Favorites"), this, TQT_SLOT(addTemplateToFavourites()));
 
 	m_favouritesMenu = new KPopupMenu(favourites_iconview);
-	m_favouritesMenu->insertItem(i18n("&Remove Favorite"), this, SLOT(removeFavourite()));
+	m_favouritesMenu->insertItem(i18n("&Remove Favorite"), this, TQT_SLOT(removeFavourite()));
 
     m_pathIsValid=false;
     m_part = part;
@@ -122,15 +122,15 @@ AppWizardDialog::AppWizardDialog(AppWizardPart *part, QWidget *parent, const cha
 	//templates_tabwidget->setCurrentPage(config->readNumEntry("CurrentTab", 0));
 
 	config->setGroup("General Options");
-    QString defaultProjectsDir = config->readPathEntry("DefaultProjectsDir", QDir::homeDirPath()+"/");
+    TQString defaultProjectsDir = config->readPathEntry("DefaultProjectsDir", TQDir::homeDirPath()+"/");
 
     KStandardDirs *dirs = AppWizardFactory::instance()->dirs();
-    QStringList m_templateNames = dirs->findAllResources("apptemplates", QString::null, false, true);
+    TQStringList m_templateNames = dirs->findAllResources("apptemplates", TQString::null, false, true);
 
     kdDebug(9010) << "Templates: " << endl;
-    QStringList categories;
+    TQStringList categories;
 
-    QStringList::Iterator it;
+    TQStringList::Iterator it;
     for (it = m_templateNames.begin(); it != m_templateNames.end(); ++it) {
         kdDebug(9010) << (*it) << endl;
 
@@ -147,10 +147,10 @@ AppWizardDialog::AppWizardDialog(AppWizardPart *part, QWidget *parent, const cha
         info->comment = templateConfig.readEntry("Comment");
         info->fileTemplates = templateConfig.readEntry("FileTemplates");
         info->openFilesAfterGeneration = templateConfig.readListEntry("ShowFilesAfterGeneration");
-        QString destDir = templateConfig.readPathEntry("DefaultDestinatonDir", defaultProjectsDir);
-        destDir.replace(QRegExp("HOMEDIR"), QDir::homeDirPath());
+        TQString destDir = templateConfig.readPathEntry("DefaultDestinatonDir", defaultProjectsDir);
+        destDir.replace(TQRegExp("HOMEDIR"), TQDir::homeDirPath());
         info->defaultDestDir = destDir;
-        QString category = templateConfig.readEntry("Category");
+        TQString category = templateConfig.readEntry("Category");
         // format category to a unique status
         if (category.right(1) == "/")
             category.remove(category.length()-1, 1); // remove /
@@ -161,13 +161,13 @@ AppWizardDialog::AppWizardDialog(AppWizardPart *part, QWidget *parent, const cha
 		info->sourceArchive = templateConfig.readEntry("Archive");
 
 		// Grab includes list
-		QStringList groups = templateConfig.groupList();
+		TQStringList groups = templateConfig.groupList();
 		groups.remove("General");
-		QStringList::Iterator group = groups.begin();
+		TQStringList::Iterator group = groups.begin();
 		for(  ; group != groups.end(); ++group)
 		{
 			templateConfig.setGroup( (*group) );
-			QString type = templateConfig.readEntry("Type").lower();
+			TQString type = templateConfig.readEntry("Type").lower();
 			if( type == "include" )  // Add value
 			{
 				info->includes.append( templateConfig.readEntry( "File" ) );
@@ -176,16 +176,16 @@ AppWizardDialog::AppWizardDialog(AppWizardPart *part, QWidget *parent, const cha
 		}
 
 		// Build builtins map to bootstrap.
-		QString source = kdevRoot( info->templateName );
+		TQString source = kdevRoot( info->templateName );
 		info->subMap.insert("kdevelop", source );
 
 		// Add includes to the main template...
-		QStringList::Iterator include = info->includes.begin();
+		TQStringList::Iterator include = info->includes.begin();
 		for( ; include != info->includes.end(); ++include)
 		{
 			if( !(*include).isEmpty() )
 			{
-				QString file = KMacroExpander::expandMacros( ( *include ), info->subMap);
+				TQString file = KMacroExpander::expandMacros( ( *include ), info->subMap);
 				KConfig tmpCfg( file );
 				tmpCfg.copyTo( "", &templateConfig);
 				kdDebug(9010) << "Merging: " << tmpCfg.name() << endl;
@@ -197,15 +197,15 @@ AppWizardDialog::AppWizardDialog(AppWizardPart *part, QWidget *parent, const cha
 		for(  ; group != groups.end(); ++group)
 		{
 			templateConfig.setGroup( (*group) );
-			QString type = templateConfig.readEntry("Type", "value").lower();
+			TQString type = templateConfig.readEntry("Type", "value").lower();
 			kdDebug(9010) << "Reading " <<  (*group) << " of type " << type << endl;
 			if( type == "value" )  // Add value
 			{
-				QString name = templateConfig.readEntry( "Value" );
-				QString label = templateConfig.readEntry( "Comment" );
-				QString type = templateConfig.readEntry( "ValueType", "String" );
-				QVariant::Type variantType = QVariant::nameToType( type.latin1());
-				QVariant value = templateConfig.readPropertyEntry( "Default", variantType );
+				TQString name = templateConfig.readEntry( "Value" );
+				TQString label = templateConfig.readEntry( "Comment" );
+				TQString type = templateConfig.readEntry( "ValueType", "String" );
+				TQVariant::Type variantType = TQVariant::nameToType( type.latin1());
+				TQVariant value = templateConfig.readPropertyEntry( "Default", variantType );
 				value.cast( variantType );  // fix this in kdelibs...
 				if( !name.isEmpty() && !label.isEmpty() )
 					info->propValues->addProperty( new PropertyLib::Property( (int)variantType, name, label, value ) );
@@ -245,7 +245,7 @@ AppWizardDialog::AppWizardDialog(AppWizardPart *part, QWidget *parent, const cha
 			}
 			else if( type == "ui")
 			{
-				QString name = templateConfig.readPathEntry("File");
+				TQString name = templateConfig.readPathEntry("File");
 				info->customUI = name;
 			}
 			else if( type == "message" )
@@ -264,9 +264,9 @@ AppWizardDialog::AppWizardDialog(AppWizardPart *part, QWidget *parent, const cha
         insertCategoryIntoTreeView(*it);
 
     // Insert items into list view
-    QPtrListIterator<ApplicationInfo> ait(m_appsInfo);
+    TQPtrListIterator<ApplicationInfo> ait(m_appsInfo);
     for (; ait.current(); ++ait) {
-        QListViewItem *item = m_categoryMap.find(ait.current()->category);
+        TQListViewItem *item = m_categoryMap.find(ait.current()->category);
         if (item)
 		{
             item = new KListViewItem(item, ait.current()->name);
@@ -281,11 +281,11 @@ AppWizardDialog::AppWizardDialog(AppWizardPart *part, QWidget *parent, const cha
 	//Load favourites from config
 	populateFavourites();
 
-	QString author, email;
+	TQString author, email;
     AppWizardUtil::guessAuthorAndEmail(&author, &email);
     author_edit->setText(author);
     email_edit->setText(email);
-    QToolTip::add( dest_edit->button(), i18n("Choose projects directory") );
+    TQToolTip::add( dest_edit->button(), i18n("Choose projects directory") );
     dest_edit->setURL(defaultProjectsDir);
     dest_edit->setMode(KFile::Directory|KFile::ExistingOnly|KFile::LocalOnly);
 
@@ -297,20 +297,20 @@ AppWizardDialog::AppWizardDialog(AppWizardPart *part, QWidget *parent, const cha
 
     setNextEnabled(generalPage, false);
 
-//    QRegExp appname_regexp ("[a-zA-Z][a-zA-Z0-9_]*"); //Non-Unicode version
+//    TQRegExp appname_regexp ("[a-zA-Z][a-zA-Z0-9_]*"); //Non-Unicode version
     /* appname will start with a letter, and will contain letters,
        digits or underscores. */
-    QRegExp appname_regexp ("[a-zA-Z][a-zA-Z0-9_]*");
+    TQRegExp appname_regexp ("[a-zA-Z][a-zA-Z0-9_]*");
     // How about names like "__" or "123" for project name? Are they legal?
-    QRegExpValidator *appname_edit_validator;
-    appname_edit_validator = new QRegExpValidator (appname_regexp,
+    TQRegExpValidator *appname_edit_validator;
+    appname_edit_validator = new TQRegExpValidator (appname_regexp,
                                                    appname_edit,
                                                    "AppNameValidator");
     appname_edit->setValidator(appname_edit_validator);
 
     // insert the licenses into the license_combo
-    QDict< KDevLicense > lics( licenses() );
-    QDictIterator< KDevLicense > dit(lics);
+    TQDict< KDevLicense > lics( licenses() );
+    TQDictIterator< KDevLicense > dit(lics);
     int idx=1;
     for( ; dit.current(); ++dit )
     {
@@ -319,9 +319,9 @@ AppWizardDialog::AppWizardDialog(AppWizardPart *part, QWidget *parent, const cha
             license_combo->setCurrentItem( idx - 1 );
     }
 
-	connect( license_combo, SIGNAL(activated(int)), this, SLOT(licenseChanged()) );
+	connect( license_combo, TQT_SIGNAL(activated(int)), this, TQT_SLOT(licenseChanged()) );
 
-	m_custom_options_layout = new QHBoxLayout( custom_options );
+	m_custom_options_layout = new TQHBoxLayout( custom_options );
 	m_custom_options_layout->setAutoAdd(true);
 
 	showTemplates(false);
@@ -347,15 +347,15 @@ void AppWizardDialog::loadVcs()
 		kdDebug(9010) << "AppWizardDialog::loadVcs: creating vcs integrator "
 			<< service->name() << endl;
 
-		KLibFactory *factory = KLibLoader::self()->factory(QFile::encodeName(service->library()));
+		KLibFactory *factory = KLibLoader::self()->factory(TQFile::encodeName(service->library()));
 		if (!factory) {
-			QString errorMessage = KLibLoader::self()->lastErrorMessage();
+			TQString errorMessage = KLibLoader::self()->lastErrorMessage();
 			kdDebug(9010) << "There was an error loading the module " << service->name() << endl <<
 			"The diagnostics is:" << endl << errorMessage << endl;
 			continue;
 		}
-		QStringList args;
-		QObject *obj = factory->create(0, service->name().latin1(),
+		TQStringList args;
+		TQObject *obj = factory->create(0, service->name().latin1(),
 									"KDevVCSIntegrator", args);
 		KDevVCSIntegrator *integrator = (KDevVCSIntegrator*) obj;
 
@@ -365,7 +365,7 @@ void AppWizardDialog::loadVcs()
 		{
 			kdDebug(9010) << "    success" << endl;
 
-			QString vcsName = service->property("X-KDevelop-VCS").toString();
+			TQString vcsName = service->property("X-KDevelop-VCS").toString();
 			m_vcsForm->combo->insertItem(vcsName, i);
 			m_integrators.insert(vcsName, integrator);
 
@@ -373,7 +373,7 @@ void AppWizardDialog::loadVcs()
 			if (vcs)
 			{
 				m_integratorDialogs[i] = vcs;
-				QWidget *w = vcs->self();
+				TQWidget *w = vcs->self();
 				if (w)
 					m_vcsForm->stack->addWidget(w, i++);
 				else
@@ -409,19 +409,19 @@ void AppWizardDialog::textChanged()
 
 void AppWizardDialog::licenseChanged()
 {
-	QValueList<AppWizardFileTemplate>::Iterator it;
+	TQValueList<AppWizardFileTemplate>::Iterator it;
 	if( license_combo->currentItem() == 0 )
 	{
 		for (it = m_fileTemplates.begin(); it != m_fileTemplates.end(); ++it)
 		{
-			QMultiLineEdit *edit = (*it).edit;
-			edit->setText( QString::null );
+			TQMultiLineEdit *edit = (*it).edit;
+			edit->setText( TQString::null );
 		}
 	} else {
 		KDevLicense* lic = licenses()[ license_combo->currentText() ];
 		for (it = m_fileTemplates.begin(); it != m_fileTemplates.end(); ++it) {
-			QString style = (*it).style;
-			QMultiLineEdit *edit = (*it).edit;
+			TQString style = (*it).style;
+			TQMultiLineEdit *edit = (*it).edit;
 
 			KDevFile::CommentingStyle commentStyle = KDevFile::CPPStyle;
 			if (style == "PStyle") {
@@ -434,25 +434,25 @@ void AppWizardDialog::licenseChanged()
 				commentStyle = KDevFile::XMLStyle;
 			}
 
-			QString text;
+			TQString text;
 			text = lic->assemble( commentStyle, author_edit->text(), email_edit->text() , 0 );
 			edit->setText(text);
 		}
 	}
 }
 
-QString AppWizardDialog::kdevRoot(const QString &templateName ) const
+TQString AppWizardDialog::kdevRoot(const TQString &templateName ) const
 {
-	QString source;
-    QFileInfo finfo(templateName);
-    QDir dir(finfo.dir());
+	TQString source;
+    TQFileInfo finfo(templateName);
+    TQDir dir(finfo.dir());
     dir.cdUp();
     return dir.absPath();
 }
 
 void AppWizardDialog::accept()
 {
-    QFileInfo fi(finalLoc_label->text());
+    TQFileInfo fi(finalLoc_label->text());
     // check /again/ whether the dir already exists; maybe users create it in the meantime
     if (fi.exists() ) {
         KMessageBox::sorry(this, i18n("The directory you have chosen as the location for "
@@ -463,7 +463,7 @@ void AppWizardDialog::accept()
         return;
     }
 
-    if( !QFileInfo(dest_edit->url()).isWritable()  ){
+    if( !TQFileInfo(dest_edit->url()).isWritable()  ){
         KMessageBox::sorry(this, i18n("The directory you have chosen as the location for "
                                       "the project is not writeable."));
         showPage(generalPage);
@@ -472,7 +472,7 @@ void AppWizardDialog::accept()
         return;
     }
 
-	QString source = kdevRoot( m_pCurrentAppInfo->templateName );
+	TQString source = kdevRoot( m_pCurrentAppInfo->templateName );
 
 	// Unpack template archive to temp dir, and get the name
 	kdDebug(9010) << "Unpacking archive to temp dir" << endl;
@@ -503,18 +503,18 @@ void AppWizardDialog::accept()
 	m_pCurrentAppInfo->subMap.insert("dest", finalLoc_label->text() );
 	m_pCurrentAppInfo->subMap.insert("APPNAME", appname_edit->text() );
 	m_pCurrentAppInfo->subMap.insert("APPNAMELC", appname_edit->text().lower() );
-	m_pCurrentAppInfo->subMap.insert("APPNAMESC", QString(appname_edit->text()[0]).upper() + appname_edit->text().mid(1));
+	m_pCurrentAppInfo->subMap.insert("APPNAMESC", TQString(appname_edit->text()[0]).upper() + appname_edit->text().mid(1));
 	m_pCurrentAppInfo->subMap.insert("APPNAMEUC", appname_edit->text().upper() );
 	m_pCurrentAppInfo->subMap.insert("AUTHOR", author_edit->text() );
 	m_pCurrentAppInfo->subMap.insert("EMAIL", email_edit->text() );
 	m_pCurrentAppInfo->subMap.insert("VERSION", version_edit->text());
 	m_pCurrentAppInfo->subMap.insert( "I18N", "i18n" );
-	m_pCurrentAppInfo->subMap.insert("YEAR", QString::number( QDate::currentDate().year() ) );
+	m_pCurrentAppInfo->subMap.insert("YEAR", TQString::number( TQDate::currentDate().year() ) );
 
 	// This isn't too pretty, but we have several templates that use KAboutData::License_${LICENSE}
 	// and unsurprisingly, KAboutData doesn't cover every imaginable case.
 	// These are the licenses known to KDE-3.2 KAboutData, KDevelop doesn't have all of these as prepared options today
-	QString license = license_combo->currentText();
+	TQString license = license_combo->currentText();
 	if ( license == "GPL" || license == "GPL_V2" || license == "LGPL" || license == "LGPL_V2"||
 		license == "BSD" || license == "NCSA" || license == "MIT" || license == "Artistic" || 
 		license == "QPL" || license == "QPL_V1_0" )
@@ -527,7 +527,7 @@ void AppWizardDialog::accept()
 	}
 
 
-	QStringList cleanUpSubstMap;
+	TQStringList cleanUpSubstMap;
 	cleanUpSubstMap << "src" << "I18N" << "kdevelop";
 
 
@@ -542,37 +542,37 @@ void AppWizardDialog::accept()
 	m_pCurrentAppInfo->dirList.prepend( baseDir );
 
 	// This is too silly for words, but it's either this or reimplementing FileTemplate
-	QString tempProjectDomSource = "<!DOCTYPE kdevelop><kdevelop><general><author>%1</author><email>%2</email><version>%3</version></general></kdevelop>";
+	TQString tempProjectDomSource = "<!DOCTYPE kdevelop><kdevelop><general><author>%1</author><email>%2</email><version>%3</version></general></kdevelop>";
 	tempProjectDomSource = tempProjectDomSource.arg( author_edit->text() ).arg( email_edit->text() ).arg( version_edit->text() );
-	QDomDocument tempProjectDom;
+	TQDomDocument tempProjectDom;
 	tempProjectDom.setContent( tempProjectDomSource );
 
-    QValueList<AppWizardFileTemplate>::Iterator it;
+    TQValueList<AppWizardFileTemplate>::Iterator it;
     for (it = m_fileTemplates.begin(); it != m_fileTemplates.end(); ++it) {
         KTempFile *tempFile = new KTempFile();
         m_tempFiles.append(tempFile);
 
-		QString templateText( FileTemplate::makeSubstitutions( tempProjectDom, (*it).edit->text() ) );
-		QFile f;
+		TQString templateText( FileTemplate::makeSubstitutions( tempProjectDom, (*it).edit->text() ) );
+		TQFile f;
 		f.open(IO_WriteOnly, tempFile->handle());
-		QTextStream temps(&f);
-		temps.setEncoding(QTextStream::UnicodeUTF8);
+		TQTextStream temps(&f);
+		temps.setEncoding(TQTextStream::UnicodeUTF8);
 		temps << templateText;
 		f.flush();
-		QString templateName( QString( "%1_TEMPLATE" ).arg( (*it).suffix ).upper() );
+		TQString templateName( TQString( "%1_TEMPLATE" ).arg( (*it).suffix ).upper() );
 		cleanUpSubstMap << templateName;
 		m_pCurrentAppInfo->subMap.insert( templateName, KMacroExpander::expandMacros(templateText , m_pCurrentAppInfo->subMap)  );
 
 		installFile file;
 		file.source = tempFile->name();
-		file.dest = QString( "%{dest}/templates/%1" ).arg( (*it).suffix );
+		file.dest = TQString( "%{dest}/templates/%1" ).arg( (*it).suffix );
 		file.process = true;
 		file.isXML = false;
 		m_pCurrentAppInfo->fileList.append( file );
     }
 
 	// Add license file to the file list
-	QString licenseFile, licenseName = i18n("Custom");
+	TQString licenseFile, licenseName = i18n("Custom");
 
     if( license_combo->currentItem() != 0 )
     {
@@ -580,13 +580,13 @@ void AppWizardDialog::accept()
         KDevLicense* lic = licenses()[ licenseName ];
         if( lic )
         {
-            QStringList files( lic->copyFiles() );
-			QStringList::Iterator it = files.begin();
+            TQStringList files( lic->copyFiles() );
+			TQStringList::Iterator it = files.begin();
 			for( ; it != files.end(); ++it )
 			{
 				installFile file;
-				file.source = QString( "%{kdevelop}/template-common/%1" ).arg( *it );
-				file.dest = QString("%{dest}/%1").arg( *it );
+				file.source = TQString( "%{kdevelop}/template-common/%1" ).arg( *it );
+				file.dest = TQString("%{dest}/%1").arg( *it );
 				file.process = true;
 				file.isXML = false;
 				m_pCurrentAppInfo->fileList.append( file );
@@ -597,7 +597,7 @@ void AppWizardDialog::accept()
     }
 
 	// Run macro expander on both the dir map and file maps
-	QValueList<installFile>::Iterator fileIt = m_pCurrentAppInfo->fileList.begin();
+	TQValueList<installFile>::Iterator fileIt = m_pCurrentAppInfo->fileList.begin();
 	for( ; fileIt != m_pCurrentAppInfo->fileList.end(); ++fileIt)
 	{
 		(*fileIt).source = KMacroExpander::expandMacros((*fileIt).source , m_pCurrentAppInfo->subMap);
@@ -605,14 +605,14 @@ void AppWizardDialog::accept()
 		(*fileIt).dest = KMacroExpander::expandMacros((*fileIt).dest , m_pCurrentAppInfo->subMap);
 	}
 
-	QValueList<installArchive>::Iterator archIt = m_pCurrentAppInfo->archList.begin();
+	TQValueList<installArchive>::Iterator archIt = m_pCurrentAppInfo->archList.begin();
 	for( ; archIt != m_pCurrentAppInfo->archList.end(); ++archIt)
 	{
 		(*archIt).source = KMacroExpander::expandMacros((*archIt).source , m_pCurrentAppInfo->subMap);
 		(*archIt).dest = KMacroExpander::expandMacros((*archIt).dest , m_pCurrentAppInfo->subMap);
 	}
 
-	QValueList<installDir>::Iterator dirIt = m_pCurrentAppInfo->dirList.begin();
+	TQValueList<installDir>::Iterator dirIt = m_pCurrentAppInfo->dirList.begin();
 	for( ; dirIt != m_pCurrentAppInfo->dirList.end(); ++dirIt)
 	{
 		(*dirIt).dir = KMacroExpander::expandMacros((*dirIt).dir , m_pCurrentAppInfo->subMap);
@@ -626,10 +626,10 @@ void AppWizardDialog::accept()
                 m_pCurrentAppInfo->finishCmdDir, m_pCurrentAppInfo->subMap );
     }
 
-	QMap<QString,QString>::Iterator mapIt( m_pCurrentAppInfo->subMap.begin() );
+	TQMap<TQString,TQString>::Iterator mapIt( m_pCurrentAppInfo->subMap.begin() );
 	for( ; mapIt != m_pCurrentAppInfo->subMap.end(); ++mapIt )
 	{
-		QString escaped( mapIt.data() );
+		TQString escaped( mapIt.data() );
 		escaped.replace( "&", "&amp;" );
 		escaped.replace( "<", "&lt;" );
 		escaped.replace( ">", "&gt;" );
@@ -698,7 +698,7 @@ void AppWizardDialog::accept()
 
 //	KMessageBox::information(this, KMacroExpander::expandMacros(m_pCurrentAppInfo->message, m_pCurrentAppInfo->subMap));
 
-	QStringList::Iterator cleanIt = cleanUpSubstMap.begin();
+	TQStringList::Iterator cleanIt = cleanUpSubstMap.begin();
 	for(;cleanIt != cleanUpSubstMap.end(); ++cleanIt )
 	{
 		m_pCurrentAppInfo->subMap.remove( *cleanIt );
@@ -737,7 +737,7 @@ void AppWizardDialog::accept()
 		kdDebug(9010) << "vcs integrator wasn't selected" << endl;
 
 	openAfterGeneration();
-	QWizard::accept();
+	TQWizard::accept();
 }
 
 bool AppWizardDialog::copyFile( const installFile& file )
@@ -751,23 +751,23 @@ bool AppWizardDialog::copyFile( const installFile& file )
 #include <sys/stat.h>
 #include <unistd.h>
 
-bool AppWizardDialog::copyFile( const QString &source, const QString &dest, bool isXML, bool process )
+bool AppWizardDialog::copyFile( const TQString &source, const TQString &dest, bool isXML, bool process )
 {
 	kdDebug( 9010 ) << "Copy: " << source << " to " << dest << endl;
 	if( process )
 	{
 		// Process the file and save it at the destFile location
-		QFile inputFile( source);
-		QFile outputFile( dest );
+		TQFile inputFile( source);
+		TQFile outputFile( dest );
 
-		const QMap<QString,QString> &subMap = isXML ?
+		const TQMap<TQString,TQString> &subMap = isXML ?
 			m_pCurrentAppInfo->subMapXML : m_pCurrentAppInfo->subMap;
 		if( inputFile.open( IO_ReadOnly ) && outputFile.open(IO_WriteOnly) )
 		{
-			QTextStream input( &inputFile );
-			input.setEncoding(QTextStream::UnicodeUTF8);
-			QTextStream output( &outputFile );
-			output.setEncoding(QTextStream::UnicodeUTF8);
+			TQTextStream input( &inputFile );
+			input.setEncoding(TQTextStream::UnicodeUTF8);
+			TQTextStream output( &outputFile );
+			output.setEncoding(TQTextStream::UnicodeUTF8);
 			while( !input.atEnd() )
 				output << KMacroExpander::expandMacros(input.readLine(), subMap) << "\n";
 			// Preserve file mode...
@@ -791,16 +791,16 @@ bool AppWizardDialog::copyFile( const QString &source, const QString &dest, bool
 	return true;
 }
 
-void AppWizardDialog::unpackArchive( const KArchiveDirectory *dir, const QString &dest, bool process )
+void AppWizardDialog::unpackArchive( const KArchiveDirectory *dir, const TQString &dest, bool process )
 {
 	KIO::NetAccess::mkdir( dest , this );
 	kdDebug(9010) << "Dir : " << dir->name() << " at " << dest << endl;
-	QStringList entries = dir->entries();
+	TQStringList entries = dir->entries();
 	kdDebug(9010) << "Entries : " << entries.join(",") << endl;
 
 	KTempDir tdir;
 
-	QStringList::Iterator entry = entries.begin();
+	TQStringList::Iterator entry = entries.begin();
 	for( ; entry != entries.end(); ++entry )
 	{
 
@@ -822,7 +822,7 @@ void AppWizardDialog::unpackArchive( const KArchiveDirectory *dir, const QString
 				file->copyTo(tdir.name());
 				// assume that an archive does not contain XML files
 				// ( where should we currently get that info from? )
-				if ( !copyFile( QDir::cleanDirPath(tdir.name()+"/"+file->name()), dest + "/" + file->name(), false, process ) )
+				if ( !copyFile( TQDir::cleanDirPath(tdir.name()+"/"+file->name()), dest + "/" + file->name(), false, process ) )
 				{
 					KMessageBox::sorry(this, i18n("The file %1 cannot be created.").arg( dest) );
 					return;
@@ -834,14 +834,14 @@ void AppWizardDialog::unpackArchive( const KArchiveDirectory *dir, const QString
 	tdir.unlink();
 }
 
-void AppWizardDialog::templatesTreeViewClicked(QListViewItem *item)
+void AppWizardDialog::templatesTreeViewClicked(TQListViewItem *item)
 {
 	if( m_customOptions )
 		delete m_customOptions;
 
     // Delete old file template pages
     while (!m_fileTemplates.isEmpty()) {
-        QMultiLineEdit *edit = m_fileTemplates.first().edit;
+        TQMultiLineEdit *edit = m_fileTemplates.first().edit;
         removePage(edit);
         delete edit;
         m_fileTemplates.remove(m_fileTemplates.begin());
@@ -852,10 +852,10 @@ void AppWizardDialog::templatesTreeViewClicked(QListViewItem *item)
     if (info) {
         m_pCurrentAppInfo = info;
         if (!info->icon.isEmpty()) {
-            QFileInfo fi(info->templateName);
-            QDir dir(fi.dir());
+            TQFileInfo fi(info->templateName);
+            TQDir dir(fi.dir());
             dir.cdUp();
-            QPixmap pm;
+            TQPixmap pm;
             pm.load(dir.filePath(info->icon));
             icon_label->setPixmap(pm);
         } else {
@@ -872,11 +872,11 @@ void AppWizardDialog::templatesTreeViewClicked(QListViewItem *item)
 
 
         // Create new file template pages
-        QStringList l = QStringList::split(",", info->fileTemplates);
+        TQStringList l = TQStringList::split(",", info->fileTemplates);
         if (l.empty()) //if the app template doesn't show file templates, we need to set another m_lastPage, aleXXX
            m_lastPage=m_vcsForm;
 
-        QStringList::ConstIterator it = l.begin();
+        TQStringList::ConstIterator it = l.begin();
         while (it != l.end()) {
             AppWizardFileTemplate fileTemplate;
             fileTemplate.suffix = *it;
@@ -887,8 +887,8 @@ void AppWizardDialog::templatesTreeViewClicked(QListViewItem *item)
             } else
                 fileTemplate.style = "";
 
-            QMultiLineEdit *edit = new QMultiLineEdit(this);
-            edit->setWordWrap(QTextEdit::NoWrap);
+            TQMultiLineEdit *edit = new TQMultiLineEdit(this);
+            edit->setWordWrap(TQTextEdit::NoWrap);
             edit->setFont(KGlobalSettings::fixedFont());
             if (it == l.end())
                 m_lastPage = edit;
@@ -908,15 +908,15 @@ void AppWizardDialog::templatesTreeViewClicked(QListViewItem *item)
 }
 
 
-void AppWizardDialog::destButtonClicked(const QString& dir)
+void AppWizardDialog::destButtonClicked(const TQString& dir)
 {
     if(!dir.isEmpty()) {
 
         // set new location as default project dir?
         KConfig *config = kapp->config();
         config->setGroup("General Options");
-        QDir defPrjDir( config->readPathEntry("DefaultProjectsDir", QDir::homeDirPath()) );
-        QDir newDir (dir);
+        TQDir defPrjDir( config->readPathEntry("DefaultProjectsDir", TQDir::homeDirPath()) );
+        TQDir newDir (dir);
         kdDebug(9010) << "DevPrjDir == newdir?: " << defPrjDir.absPath() << " == " << newDir.absPath() << endl;
         if (defPrjDir != newDir) {
             if (KMessageBox::questionYesNo(this, i18n("Set default project location to: %1?").arg( newDir.absPath() ),
@@ -941,8 +941,8 @@ void AppWizardDialog::projectLocationChanged()
   // Jakob Simon-Gaarde: Got tired of the anoying bug with the appname/location confussion.
   // This version insures WYSIWYG and checks pathvalidity
   finalLoc_label->setText(dest_edit->url() + (dest_edit->url().right(1)=="/" ? "":"/") + appname_edit->text());
-  QDir qd(dest_edit->url());
-  QFileInfo fi(dest_edit->url() + "/" + appname_edit->text());
+  TQDir qd(dest_edit->url());
+  TQFileInfo fi(dest_edit->url() + "/" + appname_edit->text());
   if (!qd.exists() || appname_edit->displayText().isEmpty()||fi.exists())
   {
     if (!fi.exists() || appname_edit->displayText().isEmpty()) {
@@ -958,17 +958,17 @@ void AppWizardDialog::projectLocationChanged()
 }
 
 
-void AppWizardDialog::insertCategoryIntoTreeView(const QString &completeCategoryPath)
+void AppWizardDialog::insertCategoryIntoTreeView(const TQString &completeCategoryPath)
 {
     kdDebug(9010) << "TemplateCategory: " << completeCategoryPath << endl;
-    QStringList categories = QStringList::split("/", completeCategoryPath);
-    QString category ="";
-    QListViewItem* pParentItem=0;
+    TQStringList categories = TQStringList::split("/", completeCategoryPath);
+    TQString category ="";
+    TQListViewItem* pParentItem=0;
 
-    QStringList::ConstIterator it;
+    TQStringList::ConstIterator it;
     for (it = categories.begin(); it != categories.end(); ++it) {
         category = category + "/" + *it;
-        QListViewItem *item = m_categoryMap.find(category);
+        TQListViewItem *item = m_categoryMap.find(category);
         if (!item) { // not found, create it
             if (!pParentItem)
                 pParentItem = new KListViewItem(templates_listview,*it);
@@ -987,9 +987,9 @@ void AppWizardDialog::insertCategoryIntoTreeView(const QString &completeCategory
 }
 
 
-ApplicationInfo *AppWizardDialog::templateForItem(QListViewItem *item)
+ApplicationInfo *AppWizardDialog::templateForItem(TQListViewItem *item)
 {
-    QPtrListIterator<ApplicationInfo> it(m_appsInfo);
+    TQPtrListIterator<ApplicationInfo> it(m_appsInfo);
     for (; it.current(); ++it)
         if (it.current()->item == item)
             return it.current();
@@ -999,16 +999,16 @@ ApplicationInfo *AppWizardDialog::templateForItem(QListViewItem *item)
 
 void AppWizardDialog::openAfterGeneration()
 {
-	QString projectFile( finalLoc_label->text() + "/" + appname_edit->text().lower() + ".kdevelop" );
+	TQString projectFile( finalLoc_label->text() + "/" + appname_edit->text().lower() + ".kdevelop" );
 
 	// Read the DOM of the newly created project
-	QFile file( projectFile );
+	TQFile file( projectFile );
 	if( !file.open( IO_ReadOnly ) )
 		return;
-	QDomDocument projectDOM;
+	TQDomDocument projectDOM;
 
 	int errorLine, errorCol;
-	QString errorMsg;
+	TQString errorMsg;
 	bool success = projectDOM.setContent( &file, &errorMsg, &errorLine, &errorCol);
 	file.close();
 	if ( !success )
@@ -1023,7 +1023,7 @@ void AppWizardDialog::openAfterGeneration()
 	DomUtil::writeMapEntry( projectDOM, "substmap", m_pCurrentAppInfo->subMap );
 
 	//save the selected vcs
-	KTrader::OfferList offers = KTrader::self()->query("KDevelop/VCSIntegrator", QString("[X-KDevelop-VCS]=='%1'").arg(m_vcsForm->combo->currentText()));
+	KTrader::OfferList offers = KTrader::self()->query("KDevelop/VCSIntegrator", TQString("[X-KDevelop-VCS]=='%1'").arg(m_vcsForm->combo->currentText()));
 	if (offers.count() == 1)
 	{
 		KService::Ptr service = offers.first();
@@ -1031,11 +1031,11 @@ void AppWizardDialog::openAfterGeneration()
 	}
 
 	// figure out what plugins we should disable by default
-	QString profileName = DomUtil::readEntry( projectDOM, "general/profile" );
+	TQString profileName = DomUtil::readEntry( projectDOM, "general/profile" );
 	if ( profileName.isEmpty() )
 	{
-		QString language = DomUtil::readEntry( projectDOM, "general/primarylanguage" );
-		QStringList keywords = DomUtil::readListEntry( projectDOM, "general/keywords", "keyword" );
+		TQString language = DomUtil::readEntry( projectDOM, "general/primarylanguage" );
+		TQStringList keywords = DomUtil::readListEntry( projectDOM, "general/keywords", "keyword" );
 
 		profileName = Settings::profileByAttributes( language, keywords );
 	}
@@ -1043,14 +1043,14 @@ void AppWizardDialog::openAfterGeneration()
 	ProfileEngine & engine = m_part->pluginController()->engine();
 	Profile * profile = engine.findProfile( profileName );
 
-	QStringList disableList;
+	TQStringList disableList;
 	Profile::EntryList disableEntryList = profile->list( Profile::ExplicitDisable );
 	for ( Profile::EntryList::const_iterator it = disableEntryList.constBegin(); it != disableEntryList.constEnd(); ++it )
 	{
 		disableList << (*it).name;
 	}
 
-	QStringList projectIgnoreparts = DomUtil::readListEntry( projectDOM, "/general/ignoreparts", "part" );
+	TQStringList projectIgnoreparts = DomUtil::readListEntry( projectDOM, "/general/ignoreparts", "part" );
 	projectIgnoreparts += disableList;
 	DomUtil::writeListEntry( projectDOM, "/general/ignoreparts", "part", projectIgnoreparts );
 
@@ -1059,8 +1059,8 @@ void AppWizardDialog::openAfterGeneration()
 	// write the dom back
 	if( !file.open( IO_WriteOnly ) )
 		return;
-	QTextStream ts( &file );
-	ts.setEncoding(QTextStream::UnicodeUTF8);
+	TQTextStream ts( &file );
+	ts.setEncoding(TQTextStream::UnicodeUTF8);
 	ts << projectDOM.toString(2);
 	file.close();
 
@@ -1071,10 +1071,10 @@ void AppWizardDialog::openAfterGeneration()
 	// timer to queue opening (so that files will not be opened before the project
 	// which is also queued by ProjectManager )
 	KURL::List urlsToOpen;
-	QStringList::Iterator it = m_pCurrentAppInfo->openFilesAfterGeneration.begin();
+	TQStringList::Iterator it = m_pCurrentAppInfo->openFilesAfterGeneration.begin();
 	for( ; it != m_pCurrentAppInfo->openFilesAfterGeneration.end(); ++it )
 	{
-		QString fileName( *it );
+		TQString fileName( *it );
 		if ( !fileName.isNull() )
 		{
 			fileName = KMacroExpander::expandMacros(fileName, m_pCurrentAppInfo->subMap);
@@ -1093,7 +1093,7 @@ void AppWizardDialog::pageChanged()
 
 
 	//it is possible that project name was changed - we need to update all vcs integrator dialogs
-	for (QMap<int, VCSDialog*>::iterator it = m_integratorDialogs.begin();
+	for (TQMap<int, VCSDialog*>::iterator it = m_integratorDialogs.begin();
 		it != m_integratorDialogs.end(); ++it)
 		(*it)->init(getProjectName(), getProjectLocation());
 }
@@ -1103,7 +1103,7 @@ void AppWizardDialog::addTemplateToFavourites()
 	addFavourite(templates_listview->currentItem());
 }
 
-void AppWizardDialog::addFavourite(QListViewItem* item, QString favouriteName)
+void AppWizardDialog::addFavourite(TQListViewItem* item, TQString favouriteName)
 {
 	if(item->childCount())
 		return;
@@ -1120,9 +1120,9 @@ void AppWizardDialog::addFavourite(QListViewItem* item, QString favouriteName)
 	}
 }
 
-ApplicationInfo* AppWizardDialog::findFavouriteInfo(QIconViewItem* item)
+ApplicationInfo* AppWizardDialog::findFavouriteInfo(TQIconViewItem* item)
 {
-    QPtrListIterator<ApplicationInfo> info(m_appsInfo);
+    TQPtrListIterator<ApplicationInfo> info(m_appsInfo);
     for (; info.current(); ++info)
         if (info.current()->favourite == item)
             return info.current();
@@ -1130,7 +1130,7 @@ ApplicationInfo* AppWizardDialog::findFavouriteInfo(QIconViewItem* item)
 	return 0;
 }
 
-void AppWizardDialog::favouritesIconViewClicked( QIconViewItem* item)
+void AppWizardDialog::favouritesIconViewClicked( TQIconViewItem* item)
 {
 	ApplicationInfo* info = findFavouriteInfo(item);
 	templatesTreeViewClicked(info->item);
@@ -1138,10 +1138,10 @@ void AppWizardDialog::favouritesIconViewClicked( QIconViewItem* item)
 
 void AppWizardDialog::removeFavourite()
 {
-	QIconViewItem* curFavourite = favourites_iconview->currentItem();
+	TQIconViewItem* curFavourite = favourites_iconview->currentItem();
 
 	//remove reference to favourite from associated appinfo
-	QPtrListIterator<ApplicationInfo> info(m_appsInfo);
+	TQPtrListIterator<ApplicationInfo> info(m_appsInfo);
 	for (; info.current(); ++info)
 	{
         if(info.current()->favourite && info.current()->favourite == curFavourite)
@@ -1163,14 +1163,14 @@ void AppWizardDialog::populateFavourites()
 
 	//favourites are stored in config as a list of templates and a seperate
 	//list of icon names.
-	QStringList templatesList = config->readPathListEntry("FavTemplates");
-	QStringList iconNamesList = config->readListEntry("FavNames");
+	TQStringList templatesList = config->readPathListEntry("FavTemplates");
+	TQStringList iconNamesList = config->readListEntry("FavNames");
 
-	QStringList::Iterator curTemplate = templatesList.begin();
-	QStringList::Iterator curIconName = iconNamesList.begin();
+	TQStringList::Iterator curTemplate = templatesList.begin();
+	TQStringList::Iterator curIconName = iconNamesList.begin();
 	while(curTemplate != templatesList.end())
 	{
-		QPtrListIterator<ApplicationInfo> info(m_appsInfo);
+		TQPtrListIterator<ApplicationInfo> info(m_appsInfo);
 		for (; info.current(); ++info)
 		{
 			if(info.current()->templateName == *curTemplate)
@@ -1190,11 +1190,11 @@ void AppWizardDialog::done(int r)
 	//it's icon name.  We have a one list for the templates
 	//and one for the names.
 
-	QStringList templatesList;
-	QStringList iconNamesList;
+	TQStringList templatesList;
+	TQStringList iconNamesList;
 
 	//Built the stringlists for each template that has a favourite.
-	QPtrListIterator<ApplicationInfo> it(m_appsInfo);
+	TQPtrListIterator<ApplicationInfo> it(m_appsInfo);
 	for (; it.current(); ++it)
 	{
         if(it.current()->favourite)
@@ -1211,24 +1211,24 @@ void AppWizardDialog::done(int r)
 	//config->writeEntry("CurrentTab", templates_tabwidget->currentPageIndex());
 	config->sync();
 
-	QDialog::done(r);
+	TQDialog::done(r);
 }
 
-void AppWizardDialog::templatesContextMenu(QListViewItem* item, const QPoint& point, int)
+void AppWizardDialog::templatesContextMenu(TQListViewItem* item, const TQPoint& point, int)
 {
 	if(item && !item->childCount())
 		m_templatesMenu->popup(point);
 }
 
-void AppWizardDialog::favouritesContextMenu(QIconViewItem* item, const QPoint& point)
+void AppWizardDialog::favouritesContextMenu(TQIconViewItem* item, const TQPoint& point)
 {
 	if(item)
 		m_favouritesMenu->popup(point);
 }
 
-void AppWizardDialog::setPermissions(const KArchiveFile *source, QString dest)
+void AppWizardDialog::setPermissions(const KArchiveFile *source, TQString dest)
 {
-	kdDebug(9010) << "AppWizardDialog::setPermissions(const KArchiveFile *source, QString dest)" << endl;
+	kdDebug(9010) << "AppWizardDialog::setPermissions(const KArchiveFile *source, TQString dest)" << endl;
 	kdDebug(9010) << "	dest: " << dest << endl;
 
 	if (source->permissions() & 00100)
@@ -1273,7 +1273,7 @@ void AppWizardDialog::setPermissions(const installFile &file)
 	}
 }
 
-QDict<KDevLicense> AppWizardDialog::licenses()
+TQDict<KDevLicense> AppWizardDialog::licenses()
 {
 	return m_licenses;
 }
@@ -1283,14 +1283,14 @@ void AppWizardDialog::loadLicenses()
 	// kdDebug(9010) << "======================== Entering loadLicenses" << endl;
 	KStandardDirs* dirs = KGlobal::dirs();
 	dirs->addResourceType( "licenses", KStandardDirs::kde_default( "data" ) + "kdevelop/licenses/" );
-	QStringList licNames = dirs->findAllResources( "licenses", QString::null, false, true );
+	TQStringList licNames = dirs->findAllResources( "licenses", TQString::null, false, true );
 
-	QStringList::Iterator it;
+	TQStringList::Iterator it;
 	for (it = licNames.begin(); it != licNames.end(); ++it)
 	{
-		QString licPath( dirs->findResource( "licenses", *it ) );
+		TQString licPath( dirs->findResource( "licenses", *it ) );
 		kdDebug(9010) << "Loading license file: " << licPath << endl;
-		QString licName = licPath.mid( licPath.findRev('/') + 1 );
+		TQString licName = licPath.mid( licPath.findRev('/') + 1 );
 		KDevLicense* lic = new KDevLicense( licName, licPath );
 		m_licenses.insert( licName, lic );
 	}
@@ -1301,7 +1301,7 @@ void AppWizardDialog::showTemplates(bool all)
 {
 	if (all)
 	{
-		QListViewItemIterator it(templates_listview);
+		TQListViewItemIterator it(templates_listview);
 		while ( it.current() ) {
 			it.current()->setVisible(true);
 			++it;
@@ -1309,19 +1309,19 @@ void AppWizardDialog::showTemplates(bool all)
 	}
 	else
 	{
-		QPtrListIterator<ApplicationInfo> ait(m_appsInfo);
+		TQPtrListIterator<ApplicationInfo> ait(m_appsInfo);
 		for (; ait.current(); ++ait)
 		{
 			ait.current()->item->setVisible(m_profileSupport->isInTemplateList(ait.current()->templateName));
 		}
 
-		QDictIterator<QListViewItem> dit(m_categoryMap);
+		TQDictIterator<TQListViewItem> dit(m_categoryMap);
 		for (; dit.current(); ++dit)
 		{
 			//checking whether all children are not visible
 			kdDebug(9010) << "check: " << dit.current()->text(0) << endl;
 			bool visible = false;
-			QListViewItemIterator it(dit.current());
+			TQListViewItemIterator it(dit.current());
 			while ( it.current() ) {
 				if ((it.current()->childCount() == 0) && it.current()->isVisible())
 				{
@@ -1337,9 +1337,9 @@ void AppWizardDialog::showTemplates(bool all)
 	}
 }
 
-void AppWizardDialog::checkAndHideItems(QListView *view)
+void AppWizardDialog::checkAndHideItems(TQListView *view)
 {
-	QListViewItem *item = view->firstChild();
+	TQListViewItem *item = view->firstChild();
 	while (item)
 	{
 		if (!m_categoryItems.contains(item))
@@ -1349,11 +1349,11 @@ void AppWizardDialog::checkAndHideItems(QListView *view)
 	}
 }
 
-bool AppWizardDialog::checkAndHideItems(QListViewItem *item)
+bool AppWizardDialog::checkAndHideItems(TQListViewItem *item)
 {
 	if (!m_categoryItems.contains(item))
 		return !item->isVisible();
-	QListViewItem *child = item->firstChild();
+	TQListViewItem *child = item->firstChild();
 	bool hide = true;
 	while (child)
 	{