1 files changed, 52 insertions, 52 deletions

diff --git a/quanta/project/projectprivate.cpp b/quanta/project/projectprivate.cpp
index aee0dbec..52879849 100644
--- a/quanta/project/projectprivate.cpp
+++ b/quanta/project/projectprivate.cpp
@@ -65,7 +65,7 @@
 ProjectPrivate::ProjectPrivate(Project *p)
           : TQObject(), config(0L), m_dirWatch(0L), tempFile(0L), sessionTempFile(0L)
 {
-  tqparent = p;
+  parent = p;
   m_projectFiles.setAutoDelete(true);
   m_showUploadTreeviews = true;
   m_eventsEnabled = true;
@@ -90,7 +90,7 @@ void ProjectPrivate::initActions(KActionCollection *ac)
                         this, TQT_SLOT( slotOpenProject() ),
                         ac, "project_open" );
   m_projectRecent =
-      KStdAction::openRecent(tqparent, TQT_SLOT(slotOpenProject(const KURL&)),
+      KStdAction::openRecent(parent, TQT_SLOT(slotOpenProject(const KURL&)),
                             ac, "project_open_recent");
   m_projectRecent->setText(i18n("Open Recent Project"));
   m_projectRecent->setIcon("project_open");
@@ -131,15 +131,15 @@ void ProjectPrivate::initActions(KActionCollection *ac)
                         ac, "project_insert_directory" );
 
   rescanPrjDirAction = new KAction( i18n( "&Rescan Project Folder..." ), "reload", 0,
-                        tqparent, TQT_SLOT( slotRescanPrjDir() ),
+                        parent, TQT_SLOT( slotRescanPrjDir() ),
                         ac, "project_rescan" );
 
   uploadProjectAction = new KAction( i18n( "&Upload Project..." ), "up", Key_F8,
-                        tqparent, TQT_SLOT( slotUpload() ),
+                        parent, TQT_SLOT( slotUpload() ),
                         ac, "project_upload" );
 
   projectOptionAction = new KAction( i18n( "&Project Properties" ), "configure", SHIFT + Key_F7,
-                        tqparent, TQT_SLOT( slotOptions() ),
+                        parent, TQT_SLOT( slotOptions() ),
                         ac, "project_options" );
 
   saveAsProjectTemplateAction =
@@ -157,7 +157,7 @@ void ProjectPrivate::initActions(KActionCollection *ac)
 
 void ProjectPrivate::adjustActions()
 {
-  bool projectExists = tqparent->hasProject();
+  bool projectExists = parent->hasProject();
   closeprjAction->setEnabled(projectExists);
   openPrjViewAction->setEnabled(projectExists);
   savePrjViewAction->setEnabled(projectExists);
@@ -173,7 +173,7 @@ void ProjectPrivate::adjustActions()
   saveSelectionAsProjectTemplateAction->setEnabled(projectExists);
 
   adjustViewActions();
-  tqparent->slotShowProjectToolbar(projectExists);
+  parent->slotShowProjectToolbar(projectExists);
 }
 
 
@@ -263,19 +263,19 @@ void ProjectPrivate::openCurrentView()
         } else {
           if (el2.nodeName() == "viewtoolbar")
           {
-            tqparent->loadToolbarFile(url);
+            parent->loadToolbarFile(url);
           }
         }
       }
       // first we open what we want, might be that a wanted file is already open!
-      tqparent->openFiles(urlsToOpen, m_defaultEncoding);
+      parent->openFiles(urlsToOpen, m_defaultEncoding);
       // second we close what we don't want
       KURL::List openURLs = ViewManager::ref()->openedFiles(true); // get open urls
       KURL::List::Iterator it;
       for ( it = openURLs.begin(); it != openURLs.end(); ++it )
       {
         if (urlsInView.findIndex( *it ) == -1)
-          tqparent->closeFile (*it);
+          parent->closeFile (*it);
       }
       break;
     }
@@ -299,7 +299,7 @@ void ProjectPrivate::insertFiles( KURL::List files )
 {
   TQDomElement  el;
   TQDomNodeList nl = dom.elementsByTagName("item");
-  tqparent->statusMsg( i18n("Adding files to the project...") );
+  parent->statusMsg( i18n("Adding files to the project...") );
   progressBar->setTotalSteps(2 * files.count() - 2);
   progressBar->setValue(0);
   progressBar->setTextEnabled(true);
@@ -350,19 +350,19 @@ void ProjectPrivate::insertFiles( KURL::List files )
   progressBar->setValue(0);
   progressBar->setTextEnabled(false);
 
-  tqparent->reloadTree(&(m_projectFiles), false, TQStringList());
-  tqparent->newtqStatus();
-  tqparent->statusMsg(TQString());
+  parent->reloadTree(&(m_projectFiles), false, TQStringList());
+  parent->newtqStatus();
+  parent->statusMsg(TQString());
 }
 
 
 /** insert files from dir recursive */
-void ProjectPrivate::insertFiles(const KURL& pathURL, const TQString& tqmask )
+void ProjectPrivate::insertFiles(const KURL& pathURL, const TQString& mask )
 {
   KURL::List list;
 
   list.append(pathURL);
-  list += QExtFileInfo::allFiles(pathURL, tqmask, m_mainWindow);
+  list += QExtFileInfo::allFiles(pathURL, mask, m_mainWindow);
   insertFiles(list);
 }
 
@@ -371,7 +371,7 @@ void ProjectPrivate::loadProjectXML()
 {
 //TODO: Optimize reading. For example iterate through all the nodes and handle them
 //according to the found node type
-  tqparent->statusMsg( i18n("Reading the project file...") );
+  parent->statusMsg( i18n("Reading the project file...") );
   TQDomNode    no;
   TQDomElement el;
   KURL url;
@@ -380,7 +380,7 @@ void ProjectPrivate::loadProjectXML()
 
   if ( projectNode.isNull() || projectName.isEmpty() )
   {
-    tqparent->hideSplash();
+    parent->hideSplash();
     KMessageBox::sorry(m_mainWindow, i18n("Invalid project file.") );
     adjustActions();
     return;
@@ -696,10 +696,10 @@ void ProjectPrivate::loadProjectXML()
   }
 
 
-  tqparent->statusMsg(TQString());
-  tqparent->newProjectLoaded(projectName, baseURL, templateURL);
-  tqparent->reloadTree(&(m_projectFiles), true, treeStatusFromXML());
-  tqparent->newtqStatus();
+  parent->statusMsg(TQString());
+  parent->newProjectLoaded(projectName, baseURL, templateURL);
+  parent->reloadTree(&(m_projectFiles), true, treeStatusFromXML());
+  parent->newtqStatus();
   adjustActions();
 }
 
@@ -723,7 +723,7 @@ void ProjectPrivate::slotAcceptCreateProject()
   /*
     it is important to set the fields only if there is some input
     otherwise you set them to an empty string and the treeview will
-    not recognize it as tqparent url because:
+    not recognize it as parent url because:
                 TQString::Null != ""
   */
   if (!png->lineHost->text().isEmpty())
@@ -806,7 +806,7 @@ void ProjectPrivate::slotAcceptCreateProject()
       {
         KURL url;
         QuantaCommon::setUrl(url, qConfig.globalDataDir + resourceDir + "templates/");
-        tqparent->slotAddDirectory(url, false);
+        parent->slotAddDirectory(url, false);
         QuantaCommon::setUrl(templateURL, "templates/");
         createTemplateDir = false;
       }
@@ -814,7 +814,7 @@ void ProjectPrivate::slotAcceptCreateProject()
       {
         KURL url;
         QuantaCommon::setUrl(url, locateLocal("data", resourceDir + "templates/"));
-        tqparent->slotAddDirectory(url, false);
+        parent->slotAddDirectory(url, false);
         QuantaCommon::setUrl(templateURL, "templates/");
         createTemplateDir = false;
       }
@@ -890,7 +890,7 @@ void ProjectPrivate::slotDeleteProjectView(const TQString &view)
       node.parentNode().removeChild(node);
       if (currentProjectView == view)
         currentProjectView = "";
-      tqparent->setModified();
+      parent->setModified();
       adjustViewActions();
       break;
     }
@@ -945,7 +945,7 @@ void ProjectPrivate::slotSaveAsProjectView(bool askForName)
   }
 
   KURL::List toolbarList;
-  tqparent->getUserToolbarFiles(&toolbarList);
+  parent->getUserToolbarFiles(&toolbarList);
   for (uint i =0 ; i < toolbarList.count(); i++)
   {
     item = dom.createElement("viewtoolbar");
@@ -956,7 +956,7 @@ void ProjectPrivate::slotSaveAsProjectView(bool askForName)
   }
 
   dom.firstChild().firstChild().appendChild( el );
-  tqparent->setModified();
+  parent->setModified();
   adjustViewActions();
 }
 
@@ -1055,7 +1055,7 @@ bool ProjectPrivate::createEmptyDom()
 
   if (!result)
   {
-    tqparent->hideSplash();
+    parent->hideSplash();
     KMessageBox::sorry(m_mainWindow, i18n("<qt>Cannot open file <b>%1</b> for writing.</qt>").tqarg(projectURL.prettyURL(0, KURL::StripFileProtocol)));
     delete tempFile;
     tempFile = 0L;
@@ -1099,7 +1099,7 @@ void ProjectPrivate::getStatusFromTree()
     i--;
   }
   TQStringList folderList;
-  tqparent->getTreetqStatus( &folderList );
+  parent->getTreetqStatus( &folderList );
   // toplevel folder is always open in a project and QExtFileInfo::toRelative
   // creates strange output -> we remove the toplevel folder
   if (folderList.count() > 0)
@@ -1159,9 +1159,9 @@ void ProjectPrivate::slotNewProject()
   connect(wiz, TQT_SIGNAL(helpClicked()), TQT_SLOT(slotNewProjectHelpClicked()));
 
   connect( pnw, TQT_SIGNAL(enableMessagesWidget()),
-          tqparent, TQT_SIGNAL(enableMessageWidget()));
+          parent, TQT_SIGNAL(enableMessageWidget()));
   connect( pnw, TQT_SIGNAL(messages(const TQString&)),
-          tqparent, TQT_SLOT  (slotGetMessages(const TQString&)));
+          parent, TQT_SLOT  (slotGetMessages(const TQString&)));
   connect( pnw, TQT_SIGNAL(enableNextButton(TQWidget *,bool)),
            wiz, TQT_SLOT(setNextEnabled(TQWidget*,bool)));
   connect( pnw, TQT_SIGNAL(enableNextButton(TQWidget *,bool)),
@@ -1197,15 +1197,15 @@ void ProjectPrivate::slotNewProject()
   delete wiz;
 
   adjustActions();
-  tqparent->newtqStatus();
+  parent->newtqStatus();
 }
 
 /** close project and edited files */
 void ProjectPrivate::slotCloseProject()
 {
-  if (!tqparent->hasProject()) return;
+  if (!parent->hasProject()) return;
   connect(ViewManager::ref(), TQT_SIGNAL(filesClosed(bool)), this, TQT_SLOT(slotProceedWithCloseProject(bool)));
-  tqparent->closeFiles();
+  parent->closeFiles();
 }
 
 void ProjectPrivate::slotProceedWithCloseProject(bool success)
@@ -1226,11 +1226,11 @@ void ProjectPrivate::slotProceedWithCloseProject(bool success)
   config->setGroup("Projects");
   config->writePathEntry("Last Project", TQString());
   init();
-  tqparent->newProjectLoaded(projectName, baseURL, templateURL);
-  tqparent->reloadTree( &(m_projectFiles), true, TQStringList());
+  parent->newProjectLoaded(projectName, baseURL, templateURL);
+  parent->reloadTree( &(m_projectFiles), true, TQStringList());
   adjustActions();
   m_projectRecent->setCurrentItem(-1);
-  tqparent->newtqStatus();
+  parent->newtqStatus();
   kapp->tqprocessEvents(TQEventLoop::ExcludeUserInput | TQEventLoop::ExcludeSocketNotifiers);
 }
 
@@ -1252,7 +1252,7 @@ void ProjectPrivate::slotOpenProject()
 /* save project file */
 bool ProjectPrivate::saveProject()
 {
-  if ( !tqparent->hasProject() ) return false;
+  if ( !parent->hasProject() ) return false;
   bool result = true;
   // remove old opened files
   TQDomElement  el;
@@ -1284,10 +1284,10 @@ bool ProjectPrivate::saveProject()
       f.close();
     }
     m_modified = false;
-    tqparent->statusMsg(i18n( "Wrote project file %1" ).tqarg(m_tmpProjectFile));
+    parent->statusMsg(i18n( "Wrote project file %1" ).tqarg(m_tmpProjectFile));
   } else
   {
-    tqparent->hideSplash();
+    parent->hideSplash();
     KMessageBox::error(m_mainWindow, i18n("<qt>Cannot open the file <b>%1</b> for writing.</qt>").tqarg(m_tmpProjectFile));
     result = false;
   }
@@ -1338,7 +1338,7 @@ void ProjectPrivate::loadProjectFromTemp(const KURL &url, const TQString &tempFi
     writeConfig();
   } else
   {
-    tqparent->hideSplash();
+    parent->hideSplash();
     KMessageBox::error(m_mainWindow, i18n("<qt>Cannot open the file <b>%1</b> for reading.</qt>").tqarg(tempFile));
   }
 }
@@ -1350,13 +1350,13 @@ bool ProjectPrivate::loadProject(const KURL &url)
     return true;
   if (!url.isValid())
   {
-    tqparent->hideSplash();
+    parent->hideSplash();
     KMessageBox::sorry(m_mainWindow, i18n("<qt>Malformed URL: <b>%1</b></qt>").tqarg(url.prettyURL()));
     return false;
   }
   if ( projectAlreadyOpen(url.url()) )
   {
-    tqparent->hideSplash();
+    parent->hideSplash();
     if (KMessageBox::warningContinueCancel(m_mainWindow, i18n("<qt>The project<br><b>%1</b><br> seems to be used by another Quanta instance.<br>You may end up with data loss if you open the same project in two instances, modify and save them in both.<br><br>Do you want to proceed with open?</qt>").tqarg(url.prettyURL()), TQString(), KStdGuiItem::open()) == KMessageBox::Cancel)
       return false;
   }
@@ -1367,7 +1367,7 @@ bool ProjectPrivate::loadProject(const KURL &url)
   if (KIO::NetAccess::exists(url, false, m_mainWindow) &&
       KIO::NetAccess::download(url, projectTmpFile, m_mainWindow))
   {
-    if (tqparent->hasProject())
+    if (parent->hasProject())
     {
       slotCloseProject();
     }
@@ -1415,7 +1415,7 @@ bool ProjectPrivate::loadProject(const KURL &url)
     loadProjectFromTemp(url, projectTmpFile, sessionTmpFile);
   } else
   {
-    tqparent->hideSplash();
+    parent->hideSplash();
     KMessageBox::error(m_mainWindow, i18n("<qt>Cannot access the project file <b>%1</b>.</qt>").tqarg(url.prettyURL(0, KURL::StripFileProtocol)));
     return false;
   }
@@ -1448,7 +1448,7 @@ void ProjectPrivate::slotAddFiles()
         CopyTo *dlg = new CopyTo( baseURL);
         connect(dlg, TQT_SIGNAL(deleteDialog(CopyTo*)),
                     TQT_SLOT  (slotDeleteCopytoDlg(CopyTo*)));
-        connect(dlg, TQT_SIGNAL(addFilesToProject(const KURL::List&)), tqparent,
+        connect(dlg, TQT_SIGNAL(addFilesToProject(const KURL::List&)), parent,
                     TQT_SLOT  (slotInsertFilesAfterCopying(const KURL::List&)));
         list = dlg->copy( list, destination );
         return;
@@ -1470,7 +1470,7 @@ void ProjectPrivate::slotAddFiles()
       }
     }
 
-    tqparent->reloadTree( &(m_projectFiles), false, TQStringList());
+    parent->reloadTree( &(m_projectFiles), false, TQStringList());
   }
 }
 
@@ -1487,7 +1487,7 @@ void ProjectPrivate::slotAddDirectory()
   KURL url = KURL();
   url = KFileDialog::getExistingURL(baseURL.prettyURL(), m_mainWindow,
                   i18n("Insert Folder in Project"));
-  tqparent->slotAddDirectory(url);
+  parent->slotAddDirectory(url);
 }
 
 
@@ -1531,7 +1531,7 @@ void ProjectPrivate::slotDebuggerOptions()
       }
       else
       {
-        tqparent->hideSplash();
+        parent->hideSplash();
         KMessageBox::error(NULL, i18n("<qt>Unable to load the debugger plugin, error code %1 was returned: <b>%2</b>.</qt>").tqarg(errCode).tqarg(KLibLoader::self()->lastErrorMessage()), i18n("Debugger Error"));
       }
     }
@@ -1639,7 +1639,7 @@ bool ProjectPrivate::uploadProjectFile()
   {
     removeFromConfig(projectURL.url());    // remove the project from the list of open projects
     if (quantaApp)
-      tqparent->statusMsg(i18n( "Uploaded project file %1" ).tqarg( projectURL.prettyURL()));
+      parent->statusMsg(i18n( "Uploaded project file %1" ).tqarg( projectURL.prettyURL()));
     // delete all temp files we used
     // first the one from creating a new project
     delete tempFile;
@@ -1659,7 +1659,7 @@ bool ProjectPrivate::uploadProjectFile()
   {
     if (quantaApp)
     {
-      tqparent->statusMsg(TQString() );
+      parent->statusMsg(TQString() );
       KMessageBox::error(m_mainWindow, KIO::NetAccess::lastErrorString());
     }
     return false;