Rename IO and network class nt* related files to equivalent tq*

Signed-off-by: Michele Calgaro <michele.calgaro@yahoo.it>

1 files changed, 25 insertions, 25 deletions

diff --git a/doc/html/tqtextstream.html b/doc/html/tqtextstream.html
index 37799be63..62b606a1c 100644
--- a/doc/html/tqtextstream.html
+++ b/doc/html/tqtextstream.html
@@ -106,7 +106,7 @@ and writing text using a TQIODevice.
 
 
 The TQTextStream class provides basic functions for reading
-and writing text using a <a href="ntqiodevice.html">TQIODevice</a>.
+and writing text using a <a href="tqiodevice.html">TQIODevice</a>.
 <p> 
 
 
@@ -134,13 +134,13 @@ binary format when reading from the stream. In particular, a
 leading '0' signifies octal, i.e. the sequence "0100" will be
 interpreted as 64.
 <p> The TQTextStream class reads and writes text; it is not appropriate
-for dealing with binary data (but <a href="ntqdatastream.html">TQDataStream</a> is).
+for dealing with binary data (but <a href="tqdatastream.html">TQDataStream</a> is).
 <p> By default, output of Unicode text (i.e. <a href="tqstring.html">TQString</a>) is done using
 the local 8-bit encoding. This can be changed using the
 <a href="#setEncoding">setEncoding</a>() method. For input, the TQTextStream will auto-detect
 standard Unicode "byte order marked" text files; otherwise the
 local 8-bit encoding is used.
-<p> The <a href="ntqiodevice.html">TQIODevice</a> is set in the constructor, or later using
+<p> The <a href="tqiodevice.html">TQIODevice</a> is set in the constructor, or later using
 <a href="#setDevice">setDevice</a>(). If the end of the input is reached <a href="#atEnd">atEnd</a>() returns
 TRUE. Data can be read into variables of the appropriate type
 using the <a href="#operator-gt-gt">operator&gt;&gt;</a>() overloads, or read in its entirety into a
@@ -149,7 +149,7 @@ single string using <a href="#read">read</a>(), or read a line at a time using
 You can set flags for the stream using <a href="#flags">flags</a>() or <a href="#setf">setf</a>(). The
 stream also supports <a href="#width">width</a>(), <a href="#precision">precision</a>() and <a href="#fill">fill</a>(); use <a href="#reset">reset</a>()
 to reset the defaults.
-<p> <p>See also <a href="ntqdatastream.html">TQDataStream</a>, <a href="io.html">Input/Output and Networking</a>, and <a href="text.html">Text Related Classes</a>.
+<p> <p>See also <a href="tqdatastream.html">TQDataStream</a>, <a href="io.html">Input/Output and Networking</a>, and <a href="text.html">Text Related Classes</a>.
 
 <hr><h2>Member Type Documentation</h2>
 <h3 class=fn><a name="Encoding-enum"></a>TQTextStream::Encoding</h3>
@@ -169,20 +169,20 @@ to reset the defaults.
 </h3>
 Constructs a data stream that has no IO device.
 
-<h3 class=fn><a name="TQTextStream-2"></a>TQTextStream::TQTextStream ( <a href="ntqiodevice.html">TQIODevice</a>&nbsp;*&nbsp;iod )
+<h3 class=fn><a name="TQTextStream-2"></a>TQTextStream::TQTextStream ( <a href="tqiodevice.html">TQIODevice</a>&nbsp;*&nbsp;iod )
 </h3>
 Constructs a text stream that uses the IO device <em>iod</em>.
 
 <h3 class=fn><a name="TQTextStream-3"></a>TQTextStream::TQTextStream ( <a href="tqstring.html">TQString</a>&nbsp;*&nbsp;str, int&nbsp;filemode )
 </h3>
 Constructs a text stream that operates on the Unicode <a href="tqstring.html">TQString</a>, <em>str</em>, through an internal device. The <em>filemode</em> argument is
-passed to the device's open() function; see <a href="ntqiodevice.html#mode">TQIODevice::mode</a>().
+passed to the device's open() function; see <a href="tqiodevice.html#mode">TQIODevice::mode</a>().
 <p> If you set an encoding or codec with <a href="#setEncoding">setEncoding</a>() or <a href="#setCodec">setCodec</a>(),
 this setting is ignored for text streams that operate on TQString.
 <p> Example:
 <pre>
     <a href="tqstring.html">TQString</a> str;
-    TQTextStream ts( &amp;str, <a href="ntqfile.html#open">IO_WriteOnly</a> );
+    TQTextStream ts( &amp;str, <a href="tqfile.html#open">IO_WriteOnly</a> );
     ts &lt;&lt; "pi = " &lt;&lt; 3.14; // str == "pi = 3.14"
     </pre>
  
@@ -206,12 +206,12 @@ parameter.
 <h3 class=fn><a name="TQTextStream-5"></a>TQTextStream::TQTextStream ( <a href="tqbytearray.html">TQByteArray</a>&nbsp;a, int&nbsp;mode )
 </h3>
 Constructs a text stream that operates on the byte array, <em>a</em>,
-through an internal <a href="ntqbuffer.html">TQBuffer</a> device. The <em>mode</em> argument is passed
-to the device's open() function; see <a href="ntqiodevice.html#mode">TQIODevice::mode</a>().
+through an internal <a href="tqbuffer.html">TQBuffer</a> device. The <em>mode</em> argument is passed
+to the device's open() function; see <a href="tqiodevice.html#mode">TQIODevice::mode</a>().
 <p> Example:
 <pre>
     <a href="tqbytearray.html">TQByteArray</a> array;
-    TQTextStream ts( array, <a href="ntqfile.html#open">IO_WriteOnly</a> );
+    TQTextStream ts( array, <a href="tqfile.html#open">IO_WriteOnly</a> );
     ts &lt;&lt; "pi = " &lt;&lt; 3.14 &lt;&lt; '\0'; // array == "pi = 3.14"
     </pre>
  
@@ -221,19 +221,19 @@ end of the string.
 <p> Same example, using a TQBuffer:
 <pre>
     <a href="tqbytearray.html">TQByteArray</a> array;
-    <a href="ntqbuffer.html">TQBuffer</a> buf( array );
-    buf.<a href="ntqiodevice.html#open">open</a>( IO_WriteOnly );
+    <a href="tqbuffer.html">TQBuffer</a> buf( array );
+    buf.<a href="tqiodevice.html#open">open</a>( IO_WriteOnly );
     TQTextStream ts( &amp;buf );
     ts &lt;&lt; "pi = " &lt;&lt; 3.14 &lt;&lt; '\0'; // array == "pi = 3.14"
-    buf.<a href="ntqiodevice.html#close">close</a>();
+    buf.<a href="tqiodevice.html#close">close</a>();
     </pre>
  
 
 <h3 class=fn><a name="TQTextStream-6"></a>TQTextStream::TQTextStream ( FILE&nbsp;*&nbsp;fh, int&nbsp;mode )
 </h3>
 Constructs a text stream that operates on an existing file handle
-<em>fh</em> through an internal <a href="ntqfile.html">TQFile</a> device. The <em>mode</em> argument is
-passed to the device's open() function; see <a href="ntqiodevice.html#mode">TQIODevice::mode</a>().
+<em>fh</em> through an internal <a href="tqfile.html">TQFile</a> device. The <em>mode</em> argument is
+passed to the device's open() function; see <a href="tqiodevice.html#mode">TQIODevice::mode</a>().
 <p> Note that if you create a TQTextStream <tt>cout</tt> or another name that
 is also used for another variable of a different type, some
 linkers may confuse the two variables, which will often cause
@@ -250,7 +250,7 @@ Destroys the text stream.
 <p> Returns TRUE if the IO device has reached the end position (end of
 the stream or file) or if there is no IO device set; otherwise
 returns FALSE.
-<p> <p>See also <a href="ntqiodevice.html#atEnd">TQIODevice::atEnd</a>().
+<p> <p>See also <a href="tqiodevice.html#atEnd">TQIODevice::atEnd</a>().
 
 <p>Examples: <a href="addressbook-example.html#x601">addressbook/centralwidget.cpp</a> and <a href="grapher-nsplugin-example.html#x2774">grapher/grapher.cpp</a>.
 <h3 class=fn><a href="tqtextcodec.html">TQTextCodec</a>&nbsp;* <a name="codec"></a>TQTextStream::codec ()
@@ -259,7 +259,7 @@ Returns the codec actually used for this stream.
 <p> If Unicode is automatically detected in input, a codec with <a href="tqtextcodec.html#name">name()</a> "ISO-10646-UCS-2" is returned.
 <p> <p>See also <a href="#setCodec">setCodec</a>().
 
-<h3 class=fn><a href="ntqiodevice.html">TQIODevice</a>&nbsp;* <a name="device"></a>TQTextStream::device () const
+<h3 class=fn><a href="tqiodevice.html">TQIODevice</a>&nbsp;* <a name="device"></a>TQTextStream::device () const
 </h3>
 
 <p> Returns the IO device currently set.
@@ -269,7 +269,7 @@ Returns the codec actually used for this stream.
 </h3>
 <p> <b>This function is obsolete.</b> It is provided to keep old source working. We strongly advise against using it in new code.
 <p> This function has been renamed to <a href="#atEnd">atEnd</a>().
-<p> <p>See also <a href="ntqiodevice.html#atEnd">TQIODevice::atEnd</a>().
+<p> <p>See also <a href="tqiodevice.html#atEnd">TQIODevice::atEnd</a>().
 
 <p>Example: <a href="tutorial2-07.html#x2592">chart/chartform_files.cpp</a>.
 <h3 class=fn>int <a name="fill"></a>TQTextStream::fill () const
@@ -510,20 +510,20 @@ to the stream.
 </h3>
 Reads the entire stream from the current position, and returns a string
 containing the text.
-<p> <p>See also <a href="ntqiodevice.html#readLine">TQIODevice::readLine</a>().
+<p> <p>See also <a href="tqiodevice.html#readLine">TQIODevice::readLine</a>().
 
-<p>Examples: <a href="tqaction-application-example.html#x1171">action/application.cpp</a>, <a href="simple-application-example.html#x1589">application/application.cpp</a>, <a href="mdi-example.html#x2074">mdi/application.cpp</a>, <a href="qdir-example.html#x1847">qdir/qdir.cpp</a>, and <a href="qwerty-example.html#x401">qwerty/qwerty.cpp</a>.
+<p>Examples: <a href="tqaction-application-example.html#x1171">action/application.cpp</a>, <a href="simple-application-example.html#x1589">application/application.cpp</a>, <a href="mdi-example.html#x2074">mdi/application.cpp</a>, <a href="tqdir-example.html#x1847">tqdir/tqdir.cpp</a>, and <a href="qwerty-example.html#x401">qwerty/qwerty.cpp</a>.
 <h3 class=fn><a href="tqstring.html">TQString</a> <a name="readLine"></a>TQTextStream::readLine ()
 </h3>
 Reads a line from the stream and returns a string containing the
 text.
 <p> The returned string does not contain any trailing newline or
 carriage return. Note that this is different from
-<a href="ntqiodevice.html#readLine">TQIODevice::readLine</a>(), which does not strip the newline at the end
+<a href="tqiodevice.html#readLine">TQIODevice::readLine</a>(), which does not strip the newline at the end
 of the line.
 <p> On EOF you will get a <a href="tqstring.html">TQString</a> that is null. On reading an empty
 line the returned TQString is empty but not null.
-<p> <p>See also <a href="ntqiodevice.html#readLine">TQIODevice::readLine</a>().
+<p> <p>See also <a href="tqiodevice.html#readLine">TQIODevice::readLine</a>().
 
 <p>Examples: <a href="addressbook-example.html#x602">addressbook/centralwidget.cpp</a>, <a href="tutorial2-03.html#x2553">chart/element.cpp</a>, and <a href="clientserver-example.html#x787">network/clientserver/server/server.cpp</a>.
 <h3 class=fn><a href="tqtextstream.html">TQTextStream</a>&nbsp;&amp; <a name="readRawBytes"></a>TQTextStream::readRawBytes ( char&nbsp;*&nbsp;s, uint&nbsp;len )
@@ -534,7 +534,7 @@ reference to the stream.
 <p> Note that no encoding is done by this function.
 <p> <b>Warning:</b> The behavior of this function is undefined unless the
 stream's encoding is set to Unicode or Latin1.
-<p> <p>See also <a href="ntqiodevice.html#readBlock">TQIODevice::readBlock</a>().
+<p> <p>See also <a href="tqiodevice.html#readBlock">TQIODevice::readBlock</a>().
 
 <h3 class=fn>void <a name="reset"></a>TQTextStream::reset ()
 </h3>
@@ -556,7 +556,7 @@ to/written from the stream.
 <p> <p>See also <a href="#setEncoding">setEncoding</a>() and <a href="#codec">codec</a>().
 
 <p>Example: <a href="qwerty-example.html#x402">qwerty/qwerty.cpp</a>.
-<h3 class=fn>void <a name="setDevice"></a>TQTextStream::setDevice ( <a href="ntqiodevice.html">TQIODevice</a>&nbsp;*&nbsp;iod )
+<h3 class=fn>void <a name="setDevice"></a>TQTextStream::setDevice ( <a href="tqiodevice.html">TQIODevice</a>&nbsp;*&nbsp;iod )
 </h3>
 Sets the IO device to <em>iod</em>.
 <p> <p>See also <a href="#device">device</a>() and <a href="#unsetDevice">unsetDevice</a>().
@@ -652,7 +652,7 @@ flags.
 Writes the <em>len</em> bytes from <em>s</em> to the stream and returns a
 reference to the stream.
 <p> Note that no encoding is done by this function.
-<p> <p>See also <a href="ntqiodevice.html#writeBlock">TQIODevice::writeBlock</a>().
+<p> <p>See also <a href="tqiodevice.html#writeBlock">TQIODevice::writeBlock</a>().
 
 <!-- eof -->
 <hr><p>