Test conversion to TQt3 from Qt3 8c6fc1f8e35fd264dd01c582ca5e7549b32ab731

5 files changed, 872 insertions, 0 deletions

diff --git a/examples/distributor/distributor.doc b/examples/distributor/distributor.doc
new file mode 100644
index 000000000..addcacecd
--- /dev/null
+++ b/examples/distributor/distributor.doc
@@ -0,0 +1,41 @@
+/*! \page distributor-example.html
+    \ingroup examples
+
+    \title Qt Distribution Example
+
+    This example program modifies the hard-coded paths that are
+    compiled into the Qt library.
+
+    When distributing the Qt library, the final installation prefix is
+    very rarely the same as the prefix used when doing development.
+    You can use the code from this example to modify the following
+    hard-coded paths in Qt library:
+
+    \list
+
+    \i Prefix - Normally, all other paths are relative to the \e
+    Prefix.
+
+    \i Binaries - Location of binaries distributed with Qt (for
+    example, \e{Qt Assistant}).
+
+    \i Documentation - Location of the Qt documentation.
+
+    \i Headers - Location of the Qt headers.
+
+    \i Libraries - Location of addition libraries distributed with Qt
+    (for example, the \e tqui library).
+
+    \i Plugins - Location of the Qt plugins.
+
+    \i Data - Location of applicaton specific data for all programs
+    distributed with Qt.
+
+    \endlist
+
+    <hr>
+
+    Implementation:
+
+    \include distributor/distributor.ui.h
+*/
diff --git a/examples/distributor/distributor.pro b/examples/distributor/distributor.pro
new file mode 100644
index 000000000..81d0ec5c0
--- /dev/null
+++ b/examples/distributor/distributor.pro
@@ -0,0 +1,10 @@
+TEMPLATE	= app
+LANGUAGE	= C++
+TARGET		= distributor
+
+CONFIG		+= qt warn_on
+
+REQUIRES	= full-config
+
+SOURCES		+= main.cpp
+FORMS		= distributor.ui
diff --git a/examples/distributor/distributor.ui b/examples/distributor/distributor.ui
new file mode 100644
index 000000000..8deff8107
--- /dev/null
+++ b/examples/distributor/distributor.ui
@@ -0,0 +1,427 @@
+<!DOCTYPE UI><UI version="3.2" stdsetdef="1">
+<class>Distributor</class>
+<widget class="TQWizard">
+    <property name="name">
+        <cstring>Distributor</cstring>
+    </property>
+    <property name="geometry">
+        <rect>
+            <x>0</x>
+            <y>0</y>
+            <width>522</width>
+            <height>422</height>
+        </rect>
+    </property>
+    <property name="caption">
+        <string>TQt Distribution Wizard</string>
+    </property>
+    <widget class="TQWidget">
+        <property name="name">
+            <cstring>selectLibrary</cstring>
+        </property>
+        <attribute name="title">
+            <string>&lt;b&gt;Select TQt Library File&lt;/b&gt;</string>
+        </attribute>
+        <grid>
+            <property name="name">
+                <cstring>unnamed</cstring>
+            </property>
+            <spacer row="2" column="0">
+                <property name="name">
+                    <cstring>spacer2</cstring>
+                </property>
+                <property name="orientation">
+                    <enum>Vertical</enum>
+                </property>
+                <property name="sizeType">
+                    <enum>Expanding</enum>
+                </property>
+                <property name="sizeHint">
+                    <size>
+                        <width>20</width>
+                        <height>40</height>
+                    </size>
+                </property>
+            </spacer>
+            <widget class="TQLineEdit" row="1" column="0">
+                <property name="name">
+                    <cstring>libFilename</cstring>
+                </property>
+                <property name="frameShape">
+                    <enum>LineEditPanel</enum>
+                </property>
+                <property name="frameShadow">
+                    <enum>Sunken</enum>
+                </property>
+            </widget>
+            <widget class="TQPushButton" row="1" column="1">
+                <property name="name">
+                    <cstring>libBrowseButton</cstring>
+                </property>
+                <property name="text">
+                    <string>&amp;Browse...</string>
+                </property>
+            </widget>
+            <widget class="TQLabel" row="0" column="0" rowspan="1" colspan="2">
+                <property name="name">
+                    <cstring>textLabel1</cstring>
+                </property>
+                <property name="text">
+                    <string>&lt;p&gt;Enter the filename of the TQt library to modify, or use the &lt;i&gt;Browse&lt;/i&gt; button to browse for the library.&lt;/p&gt;
+&lt;p&gt;This wizard will allow you to modify the installation paths stored in the library.&lt;/p&gt;</string>
+                </property>
+            </widget>
+        </grid>
+    </widget>
+    <widget class="TQWidget">
+        <property name="name">
+            <cstring>modifyPaths</cstring>
+        </property>
+        <attribute name="title">
+            <string>&lt;b&gt;Modify Installation Paths&lt;/b&gt;</string>
+        </attribute>
+        <grid>
+            <property name="name">
+                <cstring>unnamed</cstring>
+            </property>
+            <spacer row="11" column="1">
+                <property name="name">
+                    <cstring>spacer2_2</cstring>
+                </property>
+                <property name="orientation">
+                    <enum>Vertical</enum>
+                </property>
+                <property name="sizeType">
+                    <enum>Expanding</enum>
+                </property>
+                <property name="sizeHint">
+                    <size>
+                        <width>20</width>
+                        <height>40</height>
+                    </size>
+                </property>
+            </spacer>
+            <widget class="TQLabel" row="1" column="0">
+                <property name="name">
+                    <cstring>prefixBuddy</cstring>
+                </property>
+                <property name="text">
+                    <string>Installation &amp;Prefix</string>
+                </property>
+                <property name="buddy" stdset="0">
+                    <cstring>prefixPath</cstring>
+                </property>
+            </widget>
+            <widget class="TQLineEdit" row="8" column="1" rowspan="1" colspan="2">
+                <property name="name">
+                    <cstring>libPath</cstring>
+                </property>
+                <property name="enabled">
+                    <bool>false</bool>
+                </property>
+                <property name="maxLength">
+                    <number>255</number>
+                </property>
+            </widget>
+            <widget class="TQLineEdit" row="1" column="1">
+                <property name="name">
+                    <cstring>prefixPath</cstring>
+                </property>
+                <property name="maxLength">
+                    <number>255</number>
+                </property>
+            </widget>
+            <widget class="TQLineEdit" row="9" column="1" rowspan="1" colspan="2">
+                <property name="name">
+                    <cstring>plgPath</cstring>
+                </property>
+                <property name="enabled">
+                    <bool>false</bool>
+                </property>
+                <property name="maxLength">
+                    <number>255</number>
+                </property>
+            </widget>
+            <widget class="TQPushButton" row="1" column="2">
+                <property name="name">
+                    <cstring>prefixBrowseButton</cstring>
+                </property>
+                <property name="text">
+                    <string>&amp;Browse...</string>
+                </property>
+            </widget>
+            <widget class="TQLineEdit" row="10" column="1" rowspan="1" colspan="2">
+                <property name="name">
+                    <cstring>datPath</cstring>
+                </property>
+                <property name="enabled">
+                    <bool>false</bool>
+                </property>
+                <property name="maxLength">
+                    <number>255</number>
+                </property>
+            </widget>
+            <widget class="TQLabel" row="0" column="0" rowspan="1" colspan="3">
+                <property name="name">
+                    <cstring>textLabel2</cstring>
+                </property>
+                <property name="text">
+                    <string>&lt;p&gt;Enter the new &lt;i&gt;Installation Prefix&lt;/i&gt; for the selected TQt library, or use the &lt;i&gt;Browse&lt;/i&gt; button to browse for the desired directory.&lt;/p&gt;
+&lt;p&gt;Use the &lt;i&gt;Next&lt;/i&gt; button to review your choices and perform the modification.&lt;/p&gt;</string>
+                </property>
+            </widget>
+            <widget class="Line" row="2" column="0" rowspan="1" colspan="3">
+                <property name="name">
+                    <cstring>line1</cstring>
+                </property>
+                <property name="frameShape">
+                    <enum>HLine</enum>
+                </property>
+                <property name="frameShadow">
+                    <enum>Sunken</enum>
+                </property>
+                <property name="orientation">
+                    <enum>Horizontal</enum>
+                </property>
+            </widget>
+            <widget class="TQLineEdit" row="6" column="1" rowspan="1" colspan="2">
+                <property name="name">
+                    <cstring>docPath</cstring>
+                </property>
+                <property name="enabled">
+                    <bool>false</bool>
+                </property>
+                <property name="maxLength">
+                    <number>255</number>
+                </property>
+            </widget>
+            <widget class="TQLineEdit" row="7" column="1" rowspan="1" colspan="2">
+                <property name="name">
+                    <cstring>hdrPath</cstring>
+                </property>
+                <property name="enabled">
+                    <bool>false</bool>
+                </property>
+                <property name="maxLength">
+                    <number>255</number>
+                </property>
+            </widget>
+            <widget class="TQLabel" row="3" column="0" rowspan="1" colspan="3">
+                <property name="name">
+                    <cstring>textLabel3</cstring>
+                </property>
+                <property name="text">
+                    <string>&lt;p&gt;The various paths below are set automatically according to the chosen &lt;i&gt;Installation Prefix&lt;/i&gt;.  Uncheck the &lt;i&gt;Set paths from Installation Prefix&lt;/i&gt; box to enter custom values.&lt;/p&gt;</string>
+                </property>
+            </widget>
+            <widget class="TQLineEdit" row="5" column="1" rowspan="1" colspan="2">
+                <property name="name">
+                    <cstring>binPath</cstring>
+                </property>
+                <property name="enabled">
+                    <bool>false</bool>
+                </property>
+                <property name="maxLength">
+                    <number>255</number>
+                </property>
+            </widget>
+            <widget class="TQCheckBox" row="4" column="0" rowspan="1" colspan="3">
+                <property name="name">
+                    <cstring>autoSet</cstring>
+                </property>
+                <property name="text">
+                    <string>Set paths from Installation Prefix</string>
+                </property>
+                <property name="checked">
+                    <bool>true</bool>
+                </property>
+            </widget>
+            <widget class="TQLabel" row="6" column="0">
+                <property name="name">
+                    <cstring>docBuddy</cstring>
+                </property>
+                <property name="text">
+                    <string>Documentation</string>
+                </property>
+            </widget>
+            <widget class="TQLabel" row="10" column="0">
+                <property name="name">
+                    <cstring>datBuddy</cstring>
+                </property>
+                <property name="text">
+                    <string>Data</string>
+                </property>
+            </widget>
+            <widget class="TQLabel" row="7" column="0">
+                <property name="name">
+                    <cstring>hdrBuddy</cstring>
+                </property>
+                <property name="text">
+                    <string>Headers</string>
+                </property>
+            </widget>
+            <widget class="TQLabel" row="8" column="0">
+                <property name="name">
+                    <cstring>libBuddy</cstring>
+                </property>
+                <property name="text">
+                    <string>Libraries</string>
+                </property>
+            </widget>
+            <widget class="TQLabel" row="9" column="0">
+                <property name="name">
+                    <cstring>plgBuddy</cstring>
+                </property>
+                <property name="text">
+                    <string>Plugins</string>
+                </property>
+            </widget>
+            <widget class="TQLabel" row="5" column="0">
+                <property name="name">
+                    <cstring>binBuddy</cstring>
+                </property>
+                <property name="text">
+                    <string>Binaries</string>
+                </property>
+            </widget>
+        </grid>
+    </widget>
+    <widget class="TQWidget">
+        <property name="name">
+            <cstring>verifyMods</cstring>
+        </property>
+        <attribute name="title">
+            <string>&lt;b&gt;Verify Modifications&lt;/b&gt;</string>
+        </attribute>
+        <hbox>
+            <property name="name">
+                <cstring>unnamed</cstring>
+            </property>
+            <widget class="TQLabel">
+                <property name="name">
+                    <cstring>textLabel4</cstring>
+                </property>
+                <property name="text">
+                    <string>&lt;p&gt;&lt;b&gt;Current Library File:&lt;/b&gt; %1&lt;/p&gt;
+&lt;table border=0&gt;
+ &lt;tr&gt;&lt;td&gt;&lt;b&gt;New Installation Prefix:&lt;/b&gt;&lt;/td&gt;&lt;td&gt;%2&lt;/td&gt;&lt;/tr&gt;
+ &lt;tr&gt;&lt;td&gt;&lt;/td&gt;&lt;td&gt;&lt;/td&gt;&lt;/tr&gt;
+ &lt;tr&gt;&lt;td&gt;&lt;b&gt;Binaries Path:&lt;/b&gt;&lt;/td&gt;&lt;td&gt;%3&lt;/td&gt;&lt;/tr&gt;
+ &lt;tr&gt;&lt;td&gt;&lt;b&gt;Documentation Path:&lt;/b&gt;&lt;/td&gt;&lt;td&gt;%4&lt;/td&gt;&lt;/tr&gt;
+ &lt;tr&gt;&lt;td&gt;&lt;b&gt;Headers Path:&lt;/b&gt;&lt;/td&gt;&lt;td&gt;%5&lt;/td&gt;&lt;/tr&gt;
+ &lt;tr&gt;&lt;td&gt;&lt;b&gt;Libraries Path:&lt;/b&gt;&lt;/td&gt;&lt;td&gt;%6&lt;/td&gt;&lt;/tr&gt;
+ &lt;tr&gt;&lt;td&gt;&lt;b&gt;Plugins Path:&lt;/b&gt;&lt;/td&gt;&lt;td&gt;%7&lt;/td&gt;&lt;/tr&gt;
+ &lt;tr&gt;&lt;td&gt;&lt;b&gt;Data Path:&lt;/b&gt;&lt;/td&gt;&lt;td&gt;%8&lt;/td&gt;&lt;/tr&gt;
+&lt;/table&gt;
+&lt;p&gt;Please verify that these options are correct.  Press the &lt;i&gt;Finish&lt;/i&gt; button to apply these modifications to the TQt library.  Use the &lt;i&gt;Back&lt;/i&gt; button to make corrections.  Use the &lt;i&gt;Cancel&lt;/i&gt; button to abort.&lt;/p&gt;</string>
+                </property>
+                <property name="alignment">
+                    <set>WordBreak|AlignTop</set>
+                </property>
+            </widget>
+        </hbox>
+    </widget>
+</widget>
+<connections>
+    <connection>
+        <sender>autoSet</sender>
+        <signal>toggled(bool)</signal>
+        <receiver>binPath</receiver>
+        <slot>setDisabled(bool)</slot>
+    </connection>
+    <connection>
+        <sender>autoSet</sender>
+        <signal>toggled(bool)</signal>
+        <receiver>docPath</receiver>
+        <slot>setDisabled(bool)</slot>
+    </connection>
+    <connection>
+        <sender>autoSet</sender>
+        <signal>toggled(bool)</signal>
+        <receiver>hdrPath</receiver>
+        <slot>setDisabled(bool)</slot>
+    </connection>
+    <connection>
+        <sender>autoSet</sender>
+        <signal>toggled(bool)</signal>
+        <receiver>libPath</receiver>
+        <slot>setDisabled(bool)</slot>
+    </connection>
+    <connection>
+        <sender>autoSet</sender>
+        <signal>toggled(bool)</signal>
+        <receiver>plgPath</receiver>
+        <slot>setDisabled(bool)</slot>
+    </connection>
+    <connection>
+        <sender>autoSet</sender>
+        <signal>toggled(bool)</signal>
+        <receiver>datPath</receiver>
+        <slot>setDisabled(bool)</slot>
+    </connection>
+    <connection>
+        <sender>libFilename</sender>
+        <signal>textChanged(const TQString&amp;)</signal>
+        <receiver>Distributor</receiver>
+        <slot>checkLibFilename(const TQString&amp;)</slot>
+    </connection>
+    <connection>
+        <sender>libBrowseButton</sender>
+        <signal>clicked()</signal>
+        <receiver>Distributor</receiver>
+        <slot>browseLibFilename()</slot>
+    </connection>
+    <connection>
+        <sender>prefixPath</sender>
+        <signal>textChanged(const TQString&amp;)</signal>
+        <receiver>Distributor</receiver>
+        <slot>checkInstallationPrefix(const TQString&amp;)</slot>
+    </connection>
+    <connection>
+        <sender>prefixBrowseButton</sender>
+        <signal>clicked()</signal>
+        <receiver>Distributor</receiver>
+        <slot>browseInstallationPrefix()</slot>
+    </connection>
+    <connection>
+        <sender>autoSet</sender>
+        <signal>toggled(bool)</signal>
+        <receiver>Distributor</receiver>
+        <slot>toggleAutoSet(bool)</slot>
+    </connection>
+</connections>
+<tabstops>
+    <tabstop>libFilename</tabstop>
+    <tabstop>libBrowseButton</tabstop>
+    <tabstop>prefixPath</tabstop>
+    <tabstop>prefixBrowseButton</tabstop>
+    <tabstop>autoSet</tabstop>
+    <tabstop>binPath</tabstop>
+    <tabstop>docPath</tabstop>
+    <tabstop>hdrPath</tabstop>
+    <tabstop>libPath</tabstop>
+    <tabstop>plgPath</tabstop>
+    <tabstop>datPath</tabstop>
+</tabstops>
+<includes>
+    <include location="local" impldecl="in implementation">distributor.ui.h</include>
+</includes>
+<variables>
+    <variable access="private">TQTimer *timer;</variable>
+</variables>
+<slots>
+    <slot>checkLibFilename( const TQString &amp; filename )</slot>
+    <slot>browseLibFilename()</slot>
+    <slot>checkLibData()</slot>
+    <slot>checkInstallationPrefix( const TQString &amp;filename )</slot>
+    <slot>browseInstallationPrefix()</slot>
+    <slot>toggleAutoSet( bool autoset )</slot>
+    <slot>accept()</slot>
+</slots>
+<functions>
+    <function access="private" specifier="non virtual">init()</function>
+    <function>showPage( TQWidget * page )</function>
+</functions>
+<pixmapinproject/>
+<layoutdefaults spacing="6" margin="11"/>
+</UI>
diff --git a/examples/distributor/distributor.ui.h b/examples/distributor/distributor.ui.h
new file mode 100644
index 000000000..c927cda5e
--- /dev/null
+++ b/examples/distributor/distributor.ui.h
@@ -0,0 +1,383 @@
+/****************************************************************************
+** ui.h extension file, included from the uic-generated form implementation.
+**
+** If you wish to add, delete or rename functions or slots use
+** TQt Designer which will update this file, preserving your code. Create an
+** init() function in place of a constructor, and a destroy() function in
+** place of a destructor.
+*****************************************************************************/
+
+#include <qapplication.h>
+#include <qcursor.h>
+#include <qeventloop.h>
+#include <qfile.h>
+#include <qfiledialog.h>
+#include <qfileinfo.h>
+#include <qlineedit.h>
+#include <qmessagebox.h>
+#include <qpushbutton.h>
+#include <qtimer.h>
+
+
+void Distributor::init()
+{
+    timer = new TQTimer( this );
+    connect( timer, SIGNAL(timeout()), SLOT(checkLibData()) );
+
+    cancelButton()->setAutoDefault( FALSE );
+    backButton()->setAutoDefault( FALSE );
+
+    setNextEnabled( selectLibrary, FALSE );
+
+    setHelpEnabled( selectLibrary, FALSE );
+    setHelpEnabled( modifyPaths, FALSE );
+    setHelpEnabled( verifyMods, FALSE );
+
+    setFinishEnabled( verifyMods, TRUE );
+}
+
+void Distributor::showPage( TQWidget *page )
+{
+    if ( page == selectLibrary ) {
+	nextButton()->setDefault( TRUE );
+	libFilename->setFocus();
+    } else if ( page == modifyPaths ) {
+	nextButton()->setDefault( TRUE );
+	prefixPath->selectAll();
+	prefixPath->setFocus();
+    } else if ( page == verifyMods ) {
+	finishButton()->setDefault( TRUE );
+	finishButton()->setFocus();
+
+	TQString labeltext =
+	    tr("<p><b>Current Library File:</b> %1</p>"
+	       "<table border=0>"
+	       "<tr><td><b>New Installation Prefix:</b></td><td>%2</td></tr>"
+	       "<tr><td></td><td></td></tr>"
+	       "<tr><td><b>Binaries Path:</b></td><td>%3</td></tr>"
+	       "<tr><td><b>Documentation Path:</b></td><td>%4</td></tr>"
+	       "<tr><td><b>Headers Path:</b></td><td>%5</td></tr>"
+	       "<tr><td><b>Libraries Path:</b></td><td>%6</td></tr>"
+	       "<tr><td><b>Plugins Path:</b></td><td>%7</td></tr>"
+	       "<tr><td><b>Data Path:</b></td><td>%8</td></tr>"
+	       "</table>"
+	       "<p>Please verify that these options are correct.  Press the "
+	       "<i>Finish</i> button to apply these modifications to the TQt "
+	       "library.  Use the <i>Back</i> button to make corrections.  Use "
+	       "the <i>Cancel</i> button to abort.</p>")
+	    .arg( libFilename->text() )
+	    .arg( prefixPath->text() )
+	    .arg( binPath->text() )
+	    .arg( docPath->text() )
+	    .arg( hdrPath->text() )
+	    .arg( libPath->text() )
+	    .arg( plgPath->text() )
+	    .arg( datPath->text() );
+	textLabel4->setText( labeltext );
+    }
+
+    TQWizard::showPage( page );
+}
+
+void Distributor::checkLibFilename( const TQString &filename )
+{
+    setNextEnabled( selectLibrary, FALSE );
+
+    TQFileInfo fileinfo( filename );
+    if ( ! filename.isEmpty() && fileinfo.exists() &&
+	 fileinfo.isReadable() && fileinfo.isWritable() &&
+	 fileinfo.isFile() && !fileinfo.isSymLink() )
+	timer->start( 500, TRUE );
+}
+
+void Distributor::browseLibFilename()
+{
+    TQString filename =
+	TQFileDialog::getOpenFileName( TQString::null, TQString::null, this );
+    libFilename->setText( filename );
+}
+
+static char *find_pattern( char *h, const char *n, ulong hlen )
+{
+    if ( ! h || ! n || hlen == 0 )
+	return 0;
+
+#ifdef Q_OS_UNIX
+    size_t nlen;
+#else
+    ulong nlen;
+#endif
+
+    char nc = *n++;
+    nlen = strlen( n );
+    char hc;
+
+    do {
+	do {
+	    hc = *h++;
+	    if ( hlen-- < 1 )
+		return 0;
+	} while ( hc != nc );
+
+	if ( nlen > hlen )
+	    return 0;
+    } while ( qstrncmp( h, n, nlen ) != 0 );
+    return h + nlen;
+}
+
+void Distributor::checkLibData()
+{
+    struct step {
+	const char *key;
+	TQCString value;
+	bool done;
+    } steps[7];
+
+    steps[0].key = "qt_nstpath=";
+    steps[0].done = FALSE;
+
+    steps[1].key = "qt_binpath=";
+    steps[1].done = FALSE;
+
+    steps[2].key = "qt_docpath=";
+    steps[2].done = FALSE;
+
+    steps[3].key = "qt_hdrpath=";
+    steps[3].done = FALSE;
+
+    steps[4].key = "qt_libpath=";
+    steps[4].done = FALSE;
+
+    steps[5].key = "qt_plgpath=";
+    steps[5].done = FALSE;
+
+    steps[6].key = "qt_datpath=";
+    steps[6].done = FALSE;
+
+    uint completed = 0;
+    uint total_steps = sizeof(steps) / sizeof(step);
+
+    TQFile file( libFilename->text() );
+    if ( file.open( IO_ReadOnly ) ) {
+	TQApplication::setOverrideCursor( WaitCursor );
+
+	// instead of reading in the entire file, do the search in chunks
+	char data[60000];
+	ulong offset = 0;
+
+	while ( ! file.atEnd() && completed < total_steps ) {
+	    TQApplication::eventLoop()->processEvents( TQEventLoop::ExcludeUserInput );
+
+	    ulong len = file.readBlock( data, sizeof(data) );
+	    if ( len < 267 ) {
+		// not enough room to make any modifications... stop
+		break;
+	    }
+
+	    for ( uint x = 0; x < total_steps; ++x ) {
+		if ( steps[x].done ) continue;
+
+		char *s = find_pattern( data, steps[x].key, len );
+		if ( s ) {
+		    ulong where = s - data;
+		    if ( len - where < 256 ) {
+			// not enough space left to write the full
+			// path... move the file pointer back to just
+			// before the pattern and continue
+			offset += where - 11;
+			file.at( offset );
+			len = file.readBlock( data, sizeof(data) );
+			--x; // retry the current step
+			continue;
+		    }
+
+		    steps[x].value = s;
+		    steps[x].done = TRUE;
+
+		    ++completed;
+		}
+	    }
+
+	    // move to the new read position
+	    offset += len - 11;
+	    file.at( offset );
+	}
+
+	file.close();
+
+	TQApplication::restoreOverrideCursor();
+    }
+
+    if ( completed == total_steps ) {
+	setNextEnabled( selectLibrary, TRUE );
+
+	TQString prefix = TQFile::decodeName( steps[0].value );
+	prefixPath->setText( prefix );
+
+	TQString def_bin = prefix + TQString::fromLatin1( "/bin" );
+	TQString def_doc = prefix + TQString::fromLatin1( "/doc" );
+	TQString def_hdr = prefix + TQString::fromLatin1( "/include" );
+	TQString def_lib = prefix + TQString::fromLatin1( "/lib" );
+	TQString def_plg = prefix + TQString::fromLatin1( "/plugins" );
+	TQString def_dat = prefix;
+
+	TQString bin = TQFile::decodeName( steps[1].value );
+	TQString doc = TQFile::decodeName( steps[2].value );
+	TQString hdr = TQFile::decodeName( steps[3].value );
+	TQString lib = TQFile::decodeName( steps[4].value );
+	TQString plg = TQFile::decodeName( steps[5].value );
+	TQString dat = TQFile::decodeName( steps[6].value );
+
+	autoSet->setChecked( def_bin == bin &&
+			     def_doc == doc &&
+			     def_hdr == hdr &&
+			     def_lib == lib &&
+			     def_plg == plg &&
+			     def_dat == dat );
+
+	if ( ! autoSet->isChecked() ) {
+	    binPath->setText( bin );
+	    docPath->setText( doc );
+	    hdrPath->setText( hdr );
+	    libPath->setText( lib );
+	    plgPath->setText( plg );
+	    datPath->setText( dat );
+	}
+    }
+}
+
+void Distributor::checkInstallationPrefix( const TQString &prefix )
+{
+    if ( autoSet->isChecked() ) {
+	binPath->setText( prefix + TQString::fromLatin1( "/bin" ) );
+	docPath->setText( prefix + TQString::fromLatin1( "/doc" ) );
+	hdrPath->setText( prefix + TQString::fromLatin1( "/include" ) );
+	libPath->setText( prefix + TQString::fromLatin1( "/lib" ) );
+	plgPath->setText( prefix + TQString::fromLatin1( "/plugins" ) );
+	datPath->setText( prefix );
+    }
+}
+
+void Distributor::browseInstallationPrefix()
+{
+    TQString prefix =
+	TQFileDialog::getOpenFileName( TQString::null, TQString::null, this );
+    prefixPath->setText( prefix );
+}
+
+
+void Distributor::toggleAutoSet( bool autoset )
+{
+    if ( autoset ) checkInstallationPrefix( prefixPath->text() );
+}
+
+void Distributor::accept()
+{
+    struct step {
+	const char *key;
+	TQCString value;
+	bool done;
+    } steps[7];
+
+    steps[0].key = "qt_nstpath=";
+    steps[0].value = TQFile::encodeName( prefixPath->text() );
+    steps[0].done = FALSE;
+
+    steps[1].key = "qt_binpath=";
+    steps[1].value = TQFile::encodeName( binPath->text() );
+    steps[1].done = FALSE;
+
+    steps[2].key = "qt_docpath=";
+    steps[2].value = TQFile::encodeName( docPath->text() );
+    steps[2].done = FALSE;
+
+    steps[3].key = "qt_hdrpath=";
+    steps[3].value = TQFile::encodeName( hdrPath->text() );
+    steps[3].done = FALSE;
+
+    steps[4].key = "qt_libpath=";
+    steps[4].value = TQFile::encodeName( libPath->text() );
+    steps[4].done = FALSE;
+
+    steps[5].key = "qt_plgpath=";
+    steps[5].value = TQFile::encodeName( plgPath->text() );
+    steps[5].done = FALSE;
+
+    steps[6].key = "qt_datpath=";
+    steps[6].value = TQFile::encodeName( datPath->text() );
+    steps[6].done = FALSE;
+
+    uint completed = 0;
+    uint total_steps = sizeof(steps) / sizeof(step);
+
+    TQFile file( libFilename->text() );
+    if ( file.open( IO_ReadWrite ) ) {
+	TQApplication::setOverrideCursor( WaitCursor );
+
+	// instead of reading in the entire file, do the search in chunks
+	char data[60000];
+	ulong offset = 0;
+
+	while ( ! file.atEnd() && completed < total_steps ) {
+	    TQApplication::eventLoop()->processEvents( TQEventLoop::ExcludeUserInput );
+
+	    ulong len = file.readBlock( data, sizeof(data) );
+	    if ( len < 267 ) {
+		// not enough room to make any modifications... stop
+		break;
+	    }
+
+	    uint completed_save = completed;
+	    for ( uint x = 0; x < total_steps; ++x ) {
+		if ( steps[x].done ) continue;
+
+		char *s = find_pattern( data, steps[x].key, len );
+		if ( s ) {
+		    ulong where = s - data;
+		    if ( len - where < 256 ) {
+			// not enough space left to write the full
+			// path... move the file pointer back to just
+			// before the pattern and continue
+			offset += where - 11;
+			file.at( offset );
+			len = file.readBlock( data, sizeof(data) );
+			--x; // retry the current step
+			continue;
+		    }
+
+		    qstrcpy( s, steps[x].value );
+		    steps[x].done = TRUE;
+
+		    ++completed;
+		}
+	    }
+
+	    if ( completed != completed_save ) {
+		// something changed...  move file pointer back to
+		// where the data was read and write the new data
+		file.at( offset );
+		file.writeBlock( data, len );
+	    }
+
+	    // move to the new read position
+	    offset += len - 11;
+	    file.at( offset );
+	}
+
+	file.close();
+
+	TQApplication::restoreOverrideCursor();
+    }
+
+    if ( completed != total_steps ) {
+    	TQMessageBox::information( this,
+				  tr("TQt Distribution Wizard"),
+				  tr("<p><h3>Modifications failed.</h3></p>"
+				     "<p>Please make sure that you have permission "
+				     "to write the selected file, and that the library "
+				     "is properly built.</p>") );
+	return;
+    }
+
+    TQWizard::accept();
+}
diff --git a/examples/distributor/main.cpp b/examples/distributor/main.cpp
new file mode 100644
index 000000000..2a8a30cbe
--- /dev/null
+++ b/examples/distributor/main.cpp
@@ -0,0 +1,11 @@
+#include <qapplication.h>
+#include "distributor.h"
+
+int main( int argc, char ** argv )
+{
+    TQApplication a( argc, argv );
+    Distributor w;
+    w.show();
+    a.connect( &a, SIGNAL( lastWindowClosed() ), &a, SLOT( tquit() ) );
+    return a.exec();
+}