| Home | All Classes | Main Classes | Annotated | Grouped Classes | Functions | |
The TQValueVector class is a value-based template class that provides a dynamic array. More...
All the functions in this class are reentrant when TQt is built with thread support.
#include <qvaluevector.h>
TQValueVector is a TQt implementation of an STL-like vector container. It can be used in your application if the standard vector is not available for your target platforms. TQValueVector is part of the TQt Template Library.
TQValueVector<T> defines a template instance to create a vector of values that all have the class T. TQValueVector does not store pointers to the members of the vector; it holds a copy of every member. TQValueVector is said to be value based; in contrast, TQPtrList and TQDict are pointer based.
TQValueVector contains and manages a collection of objects of type T and provides random access iterators that allow the contained objects to be addressed. TQValueVector owns the contained elements. For more relaxed ownership semantics, see TQPtrCollection and friends, which are pointer-based containers.
TQValueVector provides good performance if you append or remove elements from the end of the vector. If you insert or remove elements from anywhere but the end, performance is very bad. The reason for this is that elements must to be copied into new positions.
Some classes cannot be used within a TQValueVector: for example, all classes derived from TQObject and thus all classes that implement widgets. Only values can be used in a TQValueVector. To qualify as a value the class must provide:
Note that C++ defaults to field-by-field assignment operators and copy constructors if no explicit version is supplied. In many cases this is sufficient.
TQValueVector uses an STL-like syntax to manipulate and address the objects it contains. See this document for more information.
Example:
#include <qvaluevector.h>
#include <qstring.h>
#include <stdio.h>
class Employee
{
public:
Employee(): s(0) {}
Employee( const TQString& name, int salary )
: n( name ), s( salary )
{ }
TQString name() const { return n; }
int salary() const { return s; }
void setSalary( int salary ) { s = salary; }
private:
TQString n;
int s;
};
int main()
{
typedef TQValueVector<Employee> EmployeeVector;
EmployeeVector vec( 3 ); // vector of 3 Employees
vec[0] = Employee( "Bill", 50000 );
vec[1] = Employee( "Steve", 80000 );
vec[2] = Employee( "Ron", 60000 );
Employee joe( "Joe", 50000 );
vec.push_back( joe ); // vector expands to accommodate 4 Employees
joe.setSalary( 70000 );
EmployeeVector::iterator it;
for( it = vec.begin(); it != vec.end(); ++it )
printf( "%s earns %d\n", (*it).name().latin1(), (*it).salary() );
return 0;
}
Program output:
Bill earns 50000
Steve earns 80000
Ron earns 60000
Joe earns 50000
As you can see, the most recent change to Joe's salary did not affect the value in the vector because the vector created a copy of Joe's entry.
Many TQt functions return const value vectors; to iterate over these you should make a copy and iterate over the copy.
There are several ways to find items in the vector. The begin() and end() functions return iterators to the beginning and end of the vector. The advantage of getting an iterator is that you can move forward or backward from this position by incrementing/decrementing the iterator. The iterator returned by end() points to the element which is one past the last element in the container. The past-the-end iterator is still associated with the vector it belongs to, however it is not dereferenceable; operator*() will not return a well-defined value. If the vector is empty(), the iterator returned by begin() will equal the iterator returned by end().
The fastest way to access an element of a vector is by using operator[]. This function provides random access and will return a reference to the element located at the specified index. Thus, you can access every element directly, in constant time, providing you know the location of the element. It is undefined to access an element that does not exist (your application will probably crash). For example:
TQValueVector<int> vec1; // an empty vector
vec1[10] = 4; // WARNING: undefined, probably a crash
TQValueVector<TQString> vec2(25); // initialize with 25 elements
vec2[10] = "Dave"; // OK
Whenever inserting, removing or referencing elements in a vector, always make sure you are referring to valid positions. For example:
void func( TQValueVector<int>& vec )
{
if ( vec.size() > 10 ) {
vec[9] = 99; // OK
}
};
The iterators provided by vector are random access iterators, therefore you can use them with many generic algorithms, for example, algorithms provided by the STL or the TQTL.
Another way to find an element in the vector is by using the std::find() or qFind() algorithms. For example:
TQValueVector<int> vec;
...
TQValueVector<int>::const_iterator it = qFind( vec.begin(), vec.end(), 3 );
if ( it != vector.end() )
// 'it' points to the found element
It is safe to have multiple iterators on the vector at the same time. Since TQValueVector manages memory dynamically, all iterators can become invalid if a memory reallocation occurs. For example, if some member of the vector is removed, iterators that point to the removed element and to all following elements become invalidated. Inserting into the middle of the vector will invalidate all iterators. For convenience, the function back() returns a reference to the last element in the vector, and front() returns a reference to the first element. If the vector is empty(), both back() and front() have undefined behavior (your application will crash or do unpredictable things). Use back() and front() with caution, for example:
TQValueVector<int> vec( 3 );
vec.push_back( 1 );
vec.push_back( 2 );
vec.push_back( 3 );
...
if ( !vec.empty() ) {
// OK: modify the first element
int& i = vec.front();
i = 18;
}
...
TQValueVector<double> dvec;
double d = dvec.back(); // undefined behavior
Because TQValueVector manages memory dynamically, it is recommended that you contruct a vector with an initial size. Inserting and removing elements happens fastest when:
By creating a TQValueVector with a sufficiently large initial size, there will be less memory allocations. Do not use an initial size that is too big, since it will still take time to construct all the empty entries, and the extra space will be wasted if it is never used.
Because TQValueVector is value-based there is no need to be careful about deleting elements in the vector. The vector holds its own copies and will free them if the corresponding member or the vector itself is deleted. You can force the vector to free all of its items with clear().
TQValueVector is shared implicitly, which means it can be copied in constant time. If multiple TQValueVector instances share the same data and one needs to modify its contents, this modifying instance makes a copy and modifies its private copy; it thus does not affect the other instances. This is often called "copy on write". If a TQValueVector is being used in a multi-threaded program, you must protect all access to the vector. See TQMutex.
There are several ways to insert elements into the vector. The push_back() function insert elements into the end of the vector, and is usually fastest. The insert() function can be used to add elements at specific positions within the vector.
Items can be also be removed from the vector in several ways. There are several variants of the erase() function which removes a specific element, or range of elements, from the vector.
Vectors can be also sorted with various STL algorithms , or it can be sorted using the TQt Template Library. For example with qHeapSort():
Example:
TQValueVector<int> v( 4 );
v.push_back( 5 );
v.push_back( 8 );
v.push_back( 3 );
v.push_back( 4 );
qHeapSort( v );
TQValueVector stores its elements in contiguous memory. This means that you can use a TQValueVector in any situation that retquires an array.
See also TQt Template Library Classes, Implicitly and Explicitly Shared Classes, and Non-GUI Classes.
Constructs an empty vector without any elements. To create a vector which reserves an initial amount of space for elements, use TQValueVector(size_type n).
Constructs a copy of v.
This operation costs O(1) time because TQValueVector is implicitly shared.
The first modification to the vector does takes O(n) time, because the elements must be copied.
Constructs a vector with an initial size of n elements. Each element is initialized with the value of val.
Constructs a copy of v.
This operation costs O(n) time because v is copied.
Destroys the vector, destroying all elements and freeing the allocated memory. References to the values in the vector and all iterators of this vector become invalidated. Note that it is impossible for an iterator to check whether or not it is valid: TQValueVector is tuned for performance, not for error checking.
Appends a copy of x to the end of the vector.
See also push_back() and insert().
Returns a reference to the element with index i. If ok is non-null, and the index i is out of range, *ok is set to FALSE and the returned reference is undefined. If the index i is within the range of the vector, and ok is non-null, *ok is set to TRUE and the returned reference is well defined.
This is an overloaded member function, provided for convenience. It behaves essentially like the above function.
Returns a const reference to the element with index i. If ok is non-null, and the index i is out of range, *ok is set to FALSE and the returned reference is undefined. If the index i is within the range of the vector, and ok is non-null, *ok is set to TRUE and the returned reference is well defined.
Returns a reference to the last element in the vector. If there is no last element, this function has undefined behavior.
This is an overloaded member function, provided for convenience. It behaves essentially like the above function.
Returns a const reference to the last element in the vector. If there is no last element, this function has undefined behavior.
Returns an iterator pointing to the beginning of the vector. If the vector is empty(), the returned iterator will equal end().
This is an overloaded member function, provided for convenience. It behaves essentially like the above function.
Returns a const iterator pointing to the beginning of the vector. If the vector is empty(), the returned iterator will equal end().
Returns the maximum number of elements that can be stored in the vector without forcing memory reallocation. If memory reallocation takes place, some or all iterators may become invalidated.
Removes all the elements from the vector.
Returns a const iterator pointing to the beginning of the vector. If the vector is empty(), the returned iterator will equal end().
See also constEnd().
Returns a const iterator pointing behind the last element of the vector.
See also constBegin().
Returns the number of items in the vector.
See also isEmpty().
Returns TRUE if the vector is empty; otherwise returns FALSE. Equivalent to size()==0, only faster.
This function is provided for STL compatibility. It is equivalent to isEmpty().
See also size().
Returns an iterator pointing behind the last element of the vector.
This is an overloaded member function, provided for convenience. It behaves essentially like the above function.
Returns a const iterator pointing behind the last element of the vector.
Removes the element at position pos and returns the position of the next element.
This is an overloaded member function, provided for convenience. It behaves essentially like the above function.
Removes all elements from first up to but not including last and returns the position of the next element.
Returns a reference to the first item in the vector. If there is no first item, this function has undefined behavior.
This is an overloaded member function, provided for convenience. It behaves essentially like the above function.
Returns a reference to the first element in the vector. If there is no first element, this function has undefined behavior.
This is an overloaded member function, provided for convenience. It behaves essentially like the above function.
Returns a const reference to the first element in the vector. If there is no first element, this function has undefined behavior.
Inserts a copy of x at the position immediately before pos.
See also push_back().
This is an overloaded member function, provided for convenience. It behaves essentially like the above function.
Inserts n copies of x immediately before position x.
See also push_back().
Returns TRUE if the vector is empty; returns FALSE otherwise.
See also count().
Returns a reference to the last item in the vector. If there is no last item, this function has undefined behavior.
This is an overloaded member function, provided for convenience. It behaves essentially like the above function.
Assigns v to this vector and returns a reference to this vector.
All iterators of the current vector become invalidated by this operation. The cost of such an assignment is O(1) since TQValueVector is implicitly shared.
This is an overloaded member function, provided for convenience. It behaves essentially like the above function.
Assigns v to this vector and returns a reference to this vector.
All iterators of the current vector become invalidated by this operation. The cost of this assignment is O(n) since v is copied.
Returns TRUE if each element in this vector equals each corresponding element in x; otherwise returns FALSE.
This is an overloaded member function, provided for convenience. It behaves essentially like the above function.
Returns TRUE if each element in this vector equals each corresponding element in x; otherwise returns FALSE.
Returns a reference to the element at index i. If i is out of range, this function has undefined behavior.
See also at().
This is an overloaded member function, provided for convenience. It behaves essentially like the above function.
Returns a const reference to the element at index i. If i is out of range, this function has undefined behavior.
See also at().
Removes the last item from the vector.
This function is provided for STL compatibility.
Appends a copy of x to the end of the vector. This is the fastest way to add new elements.
This function is provided for STL compatibility. It is equivalent to append().
See also insert().
Increases the vector's capacity. If n is less than or equal to capacity(), nothing happens. Otherwise, additional memory is allocated so that capacity() will be increased to a value greater than or equal to n. All iterators will then become invalidated. Note that the vector's size() and the values of existing elements remain unchanged.
Changes the size of the vector to n. If n is greater than the current size(), elements are added to the end and initialized with the value of val. If n is less than size(), elements are removed from the end. If n is equal to size() nothing happens.
Returns the number of elements in the vector.
This function is provided for STL compatibility. It is equivalent to count().
See also empty().
This file is part of the TQt toolkit. Copyright © 1995-2007 Trolltech. All Rights Reserved.
| Copyright © 2007 Trolltech | Trademarks | TQt 3.3.8
|