# translation of ar.po to Arabic # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # # Mohammed Gamal , 2006. msgid "" msgstr "" "Project-Id-Version: ar\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2007-04-02 02:31+0200\n" "PO-Revision-Date: 2006-07-10 17:40+0300\n" "Last-Translator: Mohammed Gamal \n" "Language-Team: Arabic\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 1.11.2\n" #: /home/pn/Development/wlassistant/src/wlassistant.cpp:103 msgid "Initializing..." msgstr "جاري التحميل..." #: /home/pn/Development/wlassistant/src/wlassistant.cpp:110 msgid "" "Kernel 2.6 or later not present.\n" "Wireless Assistant will now quit." msgstr "" "الإصدار 2.6 من النواة غير موجود.\n" "مساعد الشبكات اللاسلكية لن يغلق." #: /home/pn/Development/wlassistant/src/wlassistant.cpp:156 msgid "" "No usable wireless devices found.\n" "Wireless Assistant will now quit." msgstr "" "لم يتم العثور على أي أجهزة لاسلكية.\n" "سيقوم مساعد الشبكات اللاسلكية بالخروج الآن." #: /home/pn/Development/wlassistant/src/wlassistant.cpp:179 msgid "" "

You might have insufficient permissions for Wireless Assistant to " "function properly.

Did you run it using 'sudo'?

" msgstr "" "

ربما لا تكون لديك التصاريح الكافية لكي يعمل مساعد الشبكات اللاسلكية " "كي يعملبالشكل الصحيح.

هل قمت بتشغيله باستخدام 'sudo'؟

" #: /home/pn/Development/wlassistant/src/wlassistant.cpp:200 msgid "" "Executable(s) '%1' could not be found.\n" "Wireless Assistant will now quit." msgstr "" "لم يتم العثور على الملفات التنفيذية '%1'.\n" "سيقوم مساعد الشبكات اللاسلكية بالخروج الآن." #: /home/pn/Development/wlassistant/src/wlassistant.cpp:238 msgid "" "Connection to '%1' has been lost!\n" "Would you like to reconnect?" msgstr "تم فقد الإتصال '%1'!
هل تريد اعادة الاتصال؟" #: /home/pn/Development/wlassistant/src/wlassistant.cpp:238 msgid "Connection Lost" msgstr "تم فقد الاتصال" #: /home/pn/Development/wlassistant/src/wlassistant.cpp:252 msgid "" "

Settings for network '%1' are about to be deleted.

Would " "you like to continue?

" msgstr "" "

أنت على وشك حذف اعدادت الشبكة '%1'.

هل تريد المتابعة؟" #: /home/pn/Development/wlassistant/src/wlassistant.cpp:257 msgid "Settings deleted." msgstr "تم حذف الإعدادات" #: /home/pn/Development/wlassistant/src/wlassistant.cpp:285 msgid "" "

File '%1' could not be opened for writing.

Nameserver(s) " "and/or domain are not set.

" msgstr "" "

تعذر فتح الملف '%1' للكتابة.

لم يتم تعيين خوادم الأسماء " "و/أو النظاق.

" #: /home/pn/Development/wlassistant/src/wlassistant.cpp:317 msgid "Bringing interface %1 up..." msgstr "جاري تشغيل الواجهة %1..." #: /home/pn/Development/wlassistant/src/wlassistant.cpp:321 msgid "Waiting before scanning..." msgstr "" #: /home/pn/Development/wlassistant/src/wlassistant.cpp:328 #: /home/pn/Development/wlassistant/src/wlassistant.cpp:334 msgid "Scanning..." msgstr "جاري البحث..." #: /home/pn/Development/wlassistant/src/wlassistant.cpp:343 #: /home/pn/Development/wlassistant/src/wlassistant.cpp:807 msgid "Done." msgstr "انتهى." #: /home/pn/Development/wlassistant/src/wlassistant.cpp:348 msgid "No networks found." msgstr "لم يتم العثور على أي شبكة." #: /home/pn/Development/wlassistant/src/wlassistant.cpp:351 #, fuzzy msgid "" "Radio of your wireless card seems to be turned off using an external switch " "on your computer.\n" "You need turn it on to be able to use wireless networks." msgstr "" "الراديو الخاص بالبطاقة اللاسلكية لديك قد تم اطفاؤه باستخدام الزر الخارجي في " "الكمبيوتر الخاص بك.\n" "يجب عليك تشغيله كي تتمكن من استخدام الشبكات اللاسلكية." #: /home/pn/Development/wlassistant/src/wlassistant.cpp:459 msgid "Freq (Hz)" msgstr "التردد (هيرتز)" #: /home/pn/Development/wlassistant/src/wlassistant.cpp:473 msgid "" "Radio of your wireless card is off.\n" "Would you like to turn it on?" msgstr "" #: /home/pn/Development/wlassistant/src/wlassistant.cpp:559 #, fuzzy msgid "Auto connection failed." msgstr "معالج الإتصال الأول" #: /home/pn/Development/wlassistant/src/wlassistant.cpp:570 msgid "" "

Can not connect to network '%1'.

The network you are " "trying to connect to requires WPA authentication. The necessary executables " "wpa_supplicant and wpa_cli could not be found. Install " "wpa_supplicant and restart Wireless Assistant to connect.

" msgstr "" #: /home/pn/Development/wlassistant/src/wlassistant.cpp:579 msgid "%1 - First Connection Wizard" msgstr "%1 - معالج الإتصال الأول" #: /home/pn/Development/wlassistant/src/wlassistant.cpp:616 msgid "Network settings updated." msgstr "تم تحدبث اعدادات الشبكة." #: /home/pn/Development/wlassistant/src/wlassistant.cpp:644 #, fuzzy msgid "Running pre-connection command..." msgstr "فشل الإتصال." #: /home/pn/Development/wlassistant/src/wlassistant.cpp:650 msgid "Connecting to '%1'..." msgstr "جاري الإتصال بـ '%1'..." #: /home/pn/Development/wlassistant/src/wlassistant.cpp:669 #: /home/pn/Development/wlassistant/src/wlassistant.cpp:685 #: /home/pn/Development/wlassistant/src/wlassistant.cpp:718 #, fuzzy msgid "Connection failed." msgstr "تم فقد الاتصال" #: /home/pn/Development/wlassistant/src/wlassistant.cpp:701 #, fuzzy msgid "Running post-connection command..." msgstr "معالج الإتصال الأول" #: /home/pn/Development/wlassistant/src/wlassistant.cpp:708 msgid "Testing connection..." msgstr "جاري اختبار الإتصال..." #: /home/pn/Development/wlassistant/src/wlassistant.cpp:714 msgid "Successfully connected to '%1'." msgstr "تم الإتصال بـ'%1' بنجاح." #: /home/pn/Development/wlassistant/src/wlassistant.cpp:722 msgid "" "Connection failed.\n" "Would you like to review settings for this network?" msgstr "" "فشال الاتصال.\n" "هل تريد مراجعة الإعدادت لهذه الشبكة؟" #: /home/pn/Development/wlassistant/src/wlassistant.cpp:722 msgid "Review Settings?" msgstr "هل تريد مراجعة الإعدادات؟" #: /home/pn/Development/wlassistant/src/wlassistant.cpp:761 msgid "" "

You are about to disconnect from '%1'.

Would you like to " "continue?

" msgstr "" "

أنت على وشك قطع الاتصال بـ '%1'.

هل تريد المتابعة؟

" #: /home/pn/Development/wlassistant/src/wlassistant.cpp:766 #, fuzzy msgid "Running pre-disconnection command..." msgstr "فشل الإتصال." #: /home/pn/Development/wlassistant/src/wlassistant.cpp:772 msgid "Disconnecting..." msgstr "جاري قطع الإتصال..." #: /home/pn/Development/wlassistant/src/wlassistant.cpp:778 msgid "Waiting for DHCP client to shut down..." msgstr "جاري انتظار اغلاق عميل DHCP..." #: /home/pn/Development/wlassistant/src/wlassistant.cpp:801 #, fuzzy msgid "Running post-disconnection command..." msgstr "معالج الإتصال الأول" #: /home/pn/Development/wlassistant/src/wlassistant.cpp:810 msgid "Cancelled." msgstr "ملغى." #: /home/pn/Development/wlassistant/src/wlassistant.cpp:906 msgid "&Disconnect" msgstr "ا&قطع الإتصال" #: /home/pn/Development/wlassistant/src/wlassistant.cpp:908 msgid "Disconnect from the selected network" msgstr "قطع الاتصال عن الشبكة المختارة." #: /home/pn/Development/wlassistant/src/wlassistant.cpp:911 msgid "&Connect" msgstr "ا&تصل" #: /home/pn/Development/wlassistant/src/wlassistant.cpp:913 rc.cpp:39 #, no-c-format msgid "Connect to the selected network" msgstr "اتصال بالشبكة المختارة" #: /home/pn/Development/wlassistant/src/wlassistant.cpp:960 msgid "&Stop" msgstr "أق&ف" #: /home/pn/Development/wlassistant/src/wlassistant.cpp:964 msgid "" "Terminate current process\n" "(%1)" msgstr "" "انهاء العملية الحالية\n" "(%1)" #: /home/pn/Development/wlassistant/src/wlassistant.cpp:979 rc.cpp:26 #, no-c-format msgid "Quit the application" msgstr "خروج من البرنامج" #: /home/pn/Development/wlassistant/src/wlassistant.cpp:1038 #: /home/pn/Development/wlassistant/src/wlassistant.cpp:1047 msgid "Disconnect..." msgstr "اقطع الاتصال..." #: /home/pn/Development/wlassistant/src/wlassistant.cpp:1041 #, fuzzy msgid "Connect" msgstr "اتصل" #: /home/pn/Development/wlassistant/src/wlassistant.cpp:1043 msgid "Forget Settings..." msgstr "تجاهل الإعدادات..." #: /home/pn/Development/wlassistant/src/wlassistant.cpp:1044 msgid "Edit Settings..." msgstr "تحرير الإعدادات..." #: /home/pn/Development/wlassistant/src/wlassistant.cpp:1050 msgid "Configure and Connect..." msgstr "اعدّ و اتصل..." #: /home/pn/Development/wlassistant/src/wlassistant.cpp:1063 #, fuzzy msgid "%1 Settings" msgstr "اعدادات %1" #: /home/pn/Development/wlassistant/src/_translatorinfo.cpp:1 msgid "" "_: NAME OF TRANSLATORS\n" "Your names" msgstr "محمد جمال" #: /home/pn/Development/wlassistant/src/_translatorinfo.cpp:3 msgid "" "_: EMAIL OF TRANSLATORS\n" "Your emails" msgstr "m.gamal005@gmail.com" #: /home/pn/Development/wlassistant/src/main.cpp:30 #: /home/pn/Development/wlassistant/src/main.cpp:42 rc.cpp:3 #, no-c-format msgid "Wireless Assistant" msgstr "مساعد الشبكة اللاسلكية" #: /home/pn/Development/wlassistant/src/netparams.h:76 msgid "" "

The network changed its security settings.

Please go to " "Security tab of the following dialog and configure WEP settings.

" msgstr "" "

لقد تم تغيير اعدادات الأمن لهذه الشبكة.

فضلا اذهب الى " "بابالأمن في صندوق الحوار الخالي و قم بتهيئة اعدادات WEP.

" #: /home/pn/Development/wlassistant/src/netparams.h:78 msgid "" "

Your WEP Key is not set properly.

Please go to Security " "tab of the following dialog and enter the required key.

" msgstr "" "

لم يتم تعيين مفتاخ WEP الخاص بك بالشكل المناسب.

فضلا اذهب الى " "باب الأمن في صندوق الحوار هذا و أدخل المفتاح المطلوب.

" #: /home/pn/Development/wlassistant/src/netparams.h:82 msgid "" "

The network has stopped broadcasting its ESSID since the last time " "you were connected.

Would you like to use '%1' as an ESSID for " "this network?

NOTE: If you answer No, a dialog will appear where " "you will be able to specify a different ESSID.

" msgstr "" "

لقد أوقفت الشبكة بث الـESSID الخاص بها منذ آخر مرة اتصلت بها.

هل تريد استخدام '%1'كـESSID لهذه الشبكة ؟

ملحوظة: اذا " "أجبت بلا, سيظهر مربع حوار يسمح لك باختيار ESSID مختلف .

" #: rc.cpp:9 #, no-c-format msgid "Alt+O" msgstr "" #: rc.cpp:12 #, no-c-format msgid "Toggle network list/options" msgstr "اظهار و أخفاء قائمة/خيارات تاشبكة" #: rc.cpp:15 #, no-c-format msgid "" "

Options Button

\n" "

Pressing this toggle button will show the available application options.\n" "

HINT: Press this button again to return to the network list.

" msgstr "" "

زر الخيارات

\n" "

نقر هذا الزر سيظهر الخيارات المتوفرة بالبرنامج.

\n" "

تلميح: نقر هذا الزر مرة أخرى يعود الى قائمة الشبكات.

" #: rc.cpp:23 #, no-c-format msgid "Alt+Q" msgstr "" #: rc.cpp:29 #, no-c-format msgid "" "

Quit Button

\n" "

Pressing this button will quit the application.

" msgstr "" "

زر الخروج

\n" "

نقر هذا الزر سينهي البرنامج.

" #: rc.cpp:33 #, fuzzy, no-c-format msgid "Co&nnect" msgstr "اتصل" #: rc.cpp:36 rc.cpp:181 #, no-c-format msgid "Alt+N" msgstr "" #: rc.cpp:42 #, no-c-format msgid "" "

Connect/Disconnect Button

\n" "

Pressing this button will connect to/disconnect from the network " "currently selected in the network list.

" msgstr "" "

زر الإتصال/قطع الاتصال

\n" "

نقر هذا الزر سيؤدي الى الإتصال/قطع الاتصال بالشبكة المختارة حاليا من " "قائمة الشبكات.

" #: rc.cpp:46 #, no-c-format msgid "Refresh" msgstr "اعد التحميل" #: rc.cpp:50 #, no-c-format msgid "Refresh network list" msgstr "اعد تحميل قائمة الشبكات" #: rc.cpp:53 #, no-c-format msgid "" "

Scan Button

\n" "

Pressing this button will scan for wireless networks and refresh the " "network list.

" msgstr "" "

زر البحث

\n" "

نقر هذا الزر سيقوم بالبحث عن الشبكات اللاسلكية و سيعيد تحميل قائمة " "الشبكات.

" #: rc.cpp:57 #, no-c-format msgid "Device:" msgstr "الجهاز:" #: rc.cpp:60 #, no-c-format msgid "Pick a network device to use" msgstr "اختر جهاز الشبكة الذي سيتم استخدامه" #: rc.cpp:63 #, no-c-format msgid "" "

Device Selection

\n" "

This combo box allows you to select which wireless card to use.

\n" "

NOTE: Selecting a different card will refresh the network list.

" msgstr "" "

اختيار الجهاز

\n" "

هذه القائمة تسمح لك باختيار البطاقة اللاسلكية التي تريد استخدامها..

\n" "

ملحوظة: اختيار بطاقة مختلفة سيؤدي الى اعادة تحميل قائمة الشبكات." #: rc.cpp:68 rc.cpp:199 rc.cpp:325 #, no-c-format msgid "ESSID" msgstr "ESSID" #: rc.cpp:71 #, no-c-format msgid "Channel" msgstr "القناة" #: rc.cpp:74 #, no-c-format msgid "Link Quality" msgstr "جودة الوصلة" #: rc.cpp:77 #, no-c-format msgid "WEP/WPA" msgstr "" #: rc.cpp:80 #, no-c-format msgid "AP" msgstr "نقطة الاتصال" #: rc.cpp:83 #, no-c-format msgid "" "

Network List

\n" "

This list shows all the wireless networks that have been found.

\n" "

HINT: Click the Refresh button to update this list.

" msgstr "" "

قائمة الشبكات

\n" "

هذه القائمة تظهر جميع الشبكات اللاسلكية التي وجدخا البرنامج.

\n" "

تلنيح: نقر زر التحديث سيعيد تحميل هذه القائمة.

" #: rc.cpp:88 #, no-c-format msgid "Ready" msgstr "" #: rc.cpp:91 #, no-c-format msgid "" "

Status Bar

\n" "

Messages describing current process are shown in this area.

" msgstr "" "

شريط الحالة

\n" "

الرسائل التي تصف العملية الحالية ستظهر في هذا المكان.

" #: rc.cpp:95 #, no-c-format msgid "Automatically connect on startup" msgstr "" #: rc.cpp:99 #, no-c-format msgid "" "

AutomaticallyConnect on Startup

\n" "

Checking this box will make the application try to connect to the best " "available network. Only networks that have been previously configured will " "be taken into account.

" msgstr "" #: rc.cpp:103 #, no-c-format msgid "Automaticall&y reconnect if connection is lost" msgstr "" #: rc.cpp:106 #, no-c-format msgid "Alt+Y" msgstr "" #: rc.cpp:109 #, fuzzy, no-c-format msgid "" "

Automatically Reconnect if Connection is Lost

\n" "

Checking this box will make the application try to reconnect after the " "connection is lost.

" msgstr "" "

الخروج عند النجاح في الاتصال

\n" "

التأشير على هذا الصندوق سيغلق البرنامج بعد النجاح في إنشاء اتصال بشبكة " "لاسلكية.

" #: rc.cpp:113 #, no-c-format msgid "Quit upon successful connection" msgstr "اخرج عند النجاح في الاتصال" #: rc.cpp:117 #, no-c-format msgid "" "

Quit Upon Successful Connection

\n" "

Checking this box will make the application close after successfully " "establishing a connection to a wireless network.

" msgstr "" "

الخروج عند النجاح في الاتصال

\n" "

التأشير على هذا الصندوق سيغلق البرنامج بعد النجاح في إنشاء اتصال بشبكة " "لاسلكية.

" #: rc.cpp:121 #, no-c-format msgid "&Group access points with the same ESSID" msgstr "" #: rc.cpp:124 #, no-c-format msgid "Alt+G" msgstr "" #: rc.cpp:127 #, no-c-format msgid "" "

Group Access Points with the Same ESSID

\n" "

Checking this box will make all access points with the same ESSID appear " "as one item in the network list.

" msgstr "" #: rc.cpp:131 #, no-c-format msgid "Delay before scanning:" msgstr "" #: rc.cpp:134 rc.cpp:145 rc.cpp:167 #, no-c-format msgid "Specify how long to wait for an IP" msgstr "يحدد الحد الأقضى لانتظار الحصول على عنوان IP" #: rc.cpp:137 rc.cpp:148 rc.cpp:170 #, no-c-format msgid "" "

DHCP Client Timeout

\n" "

This option specifies the amount of time after which the application " "should stop waiting for an IP address and assume that the connection has " "failed.

\n" "

HINT: Increasing this number can help if you have problems connecting " "to some networks.

" msgstr "" "

الوقت الأقصى لعميل DHCP

\n" "

هذا الخيار يحدد مقدار الوقت الذي يجب في أن يتوقف البرنامج عن انتظار " "الحصول على عنوان IP و أن يعتبر أنه فشل في انشاءاتصال.

\n" "

تلميح: زيادة هذا الرقم قد تساعدك اذا كانت لديك مشاكل في الاتصالببعض " "الشبكات.

" #: rc.cpp:142 #, no-c-format msgid "DHCP client timeout:" msgstr "الوقت الأقصى لعميل DHCP:" #: rc.cpp:153 rc.cpp:164 rc.cpp:412 rc.cpp:441 rc.cpp:470 rc.cpp:499 #, no-c-format msgid "s" msgstr "s" #: rc.cpp:156 #, fuzzy, no-c-format msgid "Specify how long to wait before scanning" msgstr "يحدد الحد الأقضى لانتظار الحصول على عنوان IP" #: rc.cpp:159 #, fuzzy, no-c-format msgid "" "

Delay Before Scanning

\n" "

This option specifies the amount of time to wait between bringing the " "interface up and performing a scan.

\n" "

HINT: Increasing this number can help if you have to refresh the list " "manually to see all the available networks.

" msgstr "" "

الوقت الأقصى لعميل DHCP

\n" "

هذا الخيار يحدد مقدار الوقت الذي يجب في أن يتوقف البرنامج عن انتظار " "الحصول على عنوان IP و أن يعتبر أنه فشل في انشاءاتصال.

\n" "

تلميح: زيادة هذا الرقم قد تساعدك اذا كانت لديك مشاكل في الاتصالببعض " "الشبكات.

" #: rc.cpp:175 #, no-c-format msgid "" "Press the button below to enable all messages which have been turned off " "with the 'Don't Show Again' feature." msgstr "" "انقر هذا الزر لتمكين جميع الرسائل التي تم تعطيلها عند اختيار عدم اظهارها " "مرة أخرى." #: rc.cpp:178 #, fuzzy, no-c-format msgid "E&nable All Messages" msgstr "تمكين جميع الرسائل" #: rc.cpp:184 #, no-c-format msgid "" "

Enable All Messages

\n" "

Pressing this button will enable all messages which have been turned off " "with the 'Don't Show Again' feature.

" msgstr "" "

تمكين جميع الرسائل

\n" "

نقر هذا الزر سيمكن جميع الرسائل التي تم تعطيلها عند اختيار عدم اظهارها " "مرة أخرى.

" #: rc.cpp:188 #, no-c-format msgid "First Connection Wizard" msgstr "معالج الإتصال الأول" #: rc.cpp:191 #, no-c-format msgid "Welcome to First Connection Wizard" msgstr "أهلا بك في معالج الإتصال الأول" #: rc.cpp:194 #, no-c-format msgid "" "

This is the first time you are trying to connect to the selected " "network.

\n" "

You will be asked a few questions necessary to configure this connection." "

\n" "

Press Next to continue.

" msgstr "" "

هذه ي المرة الأولى التي تحاول فيها الاتصال بالشبكةالمختارة.

\n" "

سيتم سؤالك بعض الأسئلة الضرورية لإعداد هذا الاتصال.

\n" "

انقر التالي للمتابعة.

" #: rc.cpp:202 #, no-c-format msgid "" "

You are trying to connect to a network that does not broadcast its " "ESSID.

\n" "

Please specify ESSID that you would like to use when connecting to this " "access point.

" msgstr "" "

You are trying to connect to a network that does not broadcast its " "ESSID.

\n" "

Please specify ESSID that you would like to use when connecting to this " "access point.

" #: rc.cpp:206 rc.cpp:328 #, no-c-format msgid "ESSID:" msgstr "ESSID:" #: rc.cpp:209 #, no-c-format msgid "Interface Configuration" msgstr "اعدادات الواجهة" #: rc.cpp:213 rc.cpp:334 #, no-c-format msgid "Automatic (DHCP)" msgstr "أوتوماتيكي (DHCP)" #: rc.cpp:217 #, no-c-format msgid "Manual" msgstr "يدوي" #: rc.cpp:221 #, no-c-format msgid "" "

Your IP and other parameters need to be configured to connect to any " "network.

\n" "

Which configuration option would you like to use when connecting to this " "network?

" msgstr "" "

يجب أن تتم تهيئة عنوان IP الخاص بك اضافة الى خيارات أخرى للاتصال " "بأيشبكة.

\n" "

أي خيار تريد استخدامه عند الاتصال بهذه الشبكة؟

" #: rc.cpp:225 #, no-c-format msgid "Interface Parameters" msgstr "معاملات الواجهة" #: rc.cpp:228 rc.cpp:355 #, no-c-format msgid "Secondary DNS:" msgstr "DNS الثانوي:" #: rc.cpp:231 rc.cpp:343 #, no-c-format msgid "IP:" msgstr "عنوان IP:" #: rc.cpp:234 rc.cpp:340 #, no-c-format msgid "Netmask:" msgstr "قناع الشبكة (netmask):" #: rc.cpp:237 rc.cpp:358 #, no-c-format msgid "Primary DNS:" msgstr "DNS الأساسي:" #: rc.cpp:240 rc.cpp:349 #, no-c-format msgid "Gateway:" msgstr "البوابة:" #: rc.cpp:243 rc.cpp:352 #, no-c-format msgid "Domain:" msgstr "النطاق:" #: rc.cpp:246 rc.cpp:346 #, no-c-format msgid "Broadcast:" msgstr "عنوان البث Broadcast:" #: rc.cpp:249 #, no-c-format msgid "" "

Please specify interface parameters to be used to connect to this " "network.

\n" "

You may leave some fields blank.

" msgstr "" "

فضلا اختر خيارات الواجهة التي تريد استخدامها للاتصال بهذه الشبكة.\n" "

يمكنك ترك بعض الحقول فارغة.

" #: rc.cpp:253 #, no-c-format msgid "WEP Configuration" msgstr "اعدادات WEP" #: rc.cpp:256 #, no-c-format msgid "" "

The network you are trying to connect to requires WEP authentication.

\n" "

Which WEP mode would you like to use?

" msgstr "" "

الشبكة التي تحاول الاتصال بها تحتاج الى مصادقة WEP.

\n" "

ما هو وضع WEP الذي تريد استخدامه؟

" #: rc.cpp:261 #, fuzzy, no-c-format msgid "Open S&ystem" msgstr "نظام مفتوح" #: rc.cpp:264 #, no-c-format msgid "Shared Key" msgstr "مفتاح مشترك" #: rc.cpp:267 rc.cpp:288 #, fuzzy, no-c-format msgid "

Please provide a key to be used with this network.

" msgstr "" "

فضلا أدخل المفتاخ الذي سيستخدم مع هذه الشبكة.

\n" "يمكن استخدام أي نسق مدعوم من iwconfig." #: rc.cpp:270 #, no-c-format msgid "WEP key:" msgstr "مفتاح WEP:" #: rc.cpp:273 rc.cpp:285 rc.cpp:370 rc.cpp:391 #, no-c-format msgid "ASCII" msgstr "" #: rc.cpp:276 #, fuzzy, no-c-format msgid "WPA Configuration" msgstr "اعدادات WEP" #: rc.cpp:279 #, fuzzy, no-c-format msgid "" "

The network you are trying to connect to requires WPA authentication.

" msgstr "" "

الشبكة التي تحاول الاتصال بها تحتاج الى مصادقة WEP.

\n" "

ما هو وضع WEP الذي تريد استخدامه؟

" #: rc.cpp:282 #, fuzzy, no-c-format msgid "WPA Key:" msgstr "مفتاح WEP" #: rc.cpp:291 rc.cpp:376 #, no-c-format msgid "?
?
?
?" msgstr "" #: rc.cpp:294 rc.cpp:373 #, no-c-format msgid "" "WPA Version:
Group Cipher:
Pairwise Cipher:
Authentication Suite:" msgstr "" #: rc.cpp:297 #, no-c-format msgid "Done!" msgstr "انتهى!" #: rc.cpp:300 #, no-c-format msgid "" "

Congratulations!

\n" "

You have successfully finished configuring this connection.

\n" "

Press Finish to connect!

" msgstr "" "

تهانينا!

\n" "

لقد قمت بإعداد هذا الاتصال بنجاح.

\n" "

اضغط زر الإنهاء للاتصال!

" #: rc.cpp:311 #, no-c-format msgid "F1" msgstr "F1" #: rc.cpp:322 #, no-c-format msgid "I&nterface" msgstr "ال&واجهة" #: rc.cpp:337 #, fuzzy, no-c-format msgid "&Manual" msgstr "يدوي" #: rc.cpp:361 #, no-c-format msgid "Securit&y" msgstr "الأ&من" #: rc.cpp:364 #, fuzzy, no-c-format msgid "WPA Settings" msgstr "اعدادات %1" #: rc.cpp:367 rc.cpp:388 #, no-c-format msgid "Key:" msgstr "المفتاح:" #: rc.cpp:379 #, fuzzy, no-c-format msgid "WEP Settings" msgstr "اعدادات %1" #: rc.cpp:382 #, fuzzy, no-c-format msgid "Open Syste&m" msgstr "نظام مفتوح" #: rc.cpp:385 #, no-c-format msgid "Alt+M" msgstr "" #: rc.cpp:394 #, fuzzy, no-c-format msgid "Shared &Key" msgstr "مفتاح مشترك" #: rc.cpp:397 #, no-c-format msgid "Alt+K" msgstr "" #: rc.cpp:400 #, no-c-format msgid "Advanced" msgstr "" #: rc.cpp:403 #, no-c-format msgid "" "Security Warning: the commands specified below will be ran with the " "same privileges as Wireless Assistant has." msgstr "" #: rc.cpp:406 #, fuzzy, no-c-format msgid "Pre-Connection Command" msgstr "فشل الإتصال." #: rc.cpp:409 rc.cpp:438 rc.cpp:467 rc.cpp:496 #, no-c-format msgid "Timeout:" msgstr "" #: rc.cpp:415 rc.cpp:444 rc.cpp:473 rc.cpp:502 #, no-c-format msgid "Amount of time after which the process will be killed." msgstr "" #: rc.cpp:418 rc.cpp:447 rc.cpp:476 rc.cpp:505 #, no-c-format msgid "" "

Timeout

\n" "

This option specifies how long should Wireless Assistant wait for the " "process to finish, before it will be killed.

" msgstr "" #: rc.cpp:422 rc.cpp:451 rc.cpp:480 rc.cpp:509 #, no-c-format msgid "Run detached" msgstr "" #: rc.cpp:425 rc.cpp:454 rc.cpp:483 rc.cpp:512 #, no-c-format msgid "Don't wait for the process to finish." msgstr "" #: rc.cpp:428 rc.cpp:457 rc.cpp:486 rc.cpp:515 #, no-c-format msgid "" "

Run Detached

\n" "

If this checkbox is selected Wireless Assistant will not wait for the " "process to finish.

" msgstr "" #: rc.cpp:432 rc.cpp:461 rc.cpp:490 rc.cpp:519 #, fuzzy, no-c-format msgid "Command:" msgstr "النطاق:" #: rc.cpp:435 #, fuzzy, no-c-format msgid "Post-Connection Command" msgstr "معالج الإتصال الأول" #: rc.cpp:464 #, no-c-format msgid "Pre-Disconnection Command" msgstr "" #: rc.cpp:493 #, no-c-format msgid "Post-Disconnection Command" msgstr "" #~ msgid "WEP Mode" #~ msgstr "وضع WEP" #~ msgid "WEP?" #~ msgstr "WEP?" #~ msgid "Application Options" #~ msgstr "خيارات البرنامج"