diff options
Diffstat (limited to 'ta/messages/Makefile.in')
| -rw-r--r-- | ta/messages/Makefile.in | 781 |
1 files changed, 781 insertions, 0 deletions
diff --git a/ta/messages/Makefile.in b/ta/messages/Makefile.in new file mode 100644 index 0000000..33ca315 --- /dev/null +++ b/ta/messages/Makefile.in @@ -0,0 +1,781 @@ +# Makefile.in generated by automake 1.10.1 from Makefile.am. +# KDE tags expanded automatically by am_edit - $Revision: 483858 $ +# @configure_input@ + +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ +VPATH = @srcdir@ +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +target_triplet = @target@ +subdir = ta/messages +DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ + $(top_srcdir)/configure.in +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +mkinstalldirs = $(SHELL) $(top_srcdir)/admin/mkinstalldirs +CONFIG_HEADER = $(top_builddir)/config.h +CONFIG_CLEAN_FILES = +SOURCES = +DIST_SOURCES = +#>- RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ +#>- html-recursive info-recursive install-data-recursive \ +#>- install-dvi-recursive install-exec-recursive \ +#>- install-html-recursive install-info-recursive \ +#>- install-pdf-recursive install-ps-recursive install-recursive \ +#>- installcheck-recursive installdirs-recursive pdf-recursive \ +#>- ps-recursive uninstall-recursive +#>+ 7 +RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ + html-recursive info-recursive install-data-recursive \ + install-dvi-recursive install-exec-recursive \ + install-html-recursive install-info-recursive \ + install-pdf-recursive install-ps-recursive install-recursive \ + installcheck-recursive installdirs-recursive pdf-recursive \ + ps-recursive uninstall-recursive nmcheck-recursive bcheck-recursive +RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ + distclean-recursive maintainer-clean-recursive +ETAGS = etags +CTAGS = ctags +DIST_SUBDIRS = $(SUBDIRS) +#>- DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +#>+ 1 +#>- DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) $(KDE_DIST) +#>+ 1 +DISTFILES = $(GMOFILES) $(POFILES) $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) $(KDE_DIST) +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AR = @AR@ +ARTSCCONFIG = @ARTSCCONFIG@ +AUTOCONF = @AUTOCONF@ +AUTODIRS = @AUTODIRS@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CONF_FILES = @CONF_FILES@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CXX = @CXX@ +CXXCPP = @CXXCPP@ +CXXDEPMODE = @CXXDEPMODE@ +CXXFLAGS = @CXXFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DCOPIDL = @DCOPIDL@ +DCOPIDL2CPP = @DCOPIDL2CPP@ +DCOPIDLNG = @DCOPIDLNG@ +DCOP_DEPENDENCIES = @DCOP_DEPENDENCIES@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +ECHO = @ECHO@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +ENABLE_PERMISSIVE_FLAG = @ENABLE_PERMISSIVE_FLAG@ +EXEEXT = @EXEEXT@ +F77 = @F77@ +FFLAGS = @FFLAGS@ +FRAMEWORK_COREAUDIO = @FRAMEWORK_COREAUDIO@ +GMSGFMT = @GMSGFMT@ +GREP = @GREP@ +HAVE_GCC_VISIBILITY = @HAVE_GCC_VISIBILITY@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +KCFG_DEPENDENCIES = @KCFG_DEPENDENCIES@ +KCONFIG_COMPILER = @KCONFIG_COMPILER@ +KDECONFIG = @KDECONFIG@ +KDE_CHECK_PLUGIN = @KDE_CHECK_PLUGIN@ +KDE_EXTRA_RPATH = @KDE_EXTRA_RPATH@ +KDE_INCLUDES = @KDE_INCLUDES@ +KDE_LDFLAGS = @KDE_LDFLAGS@ +KDE_MT_LDFLAGS = @KDE_MT_LDFLAGS@ +KDE_MT_LIBS = @KDE_MT_LIBS@ +KDE_NO_UNDEFINED = @KDE_NO_UNDEFINED@ +KDE_PLUGIN = @KDE_PLUGIN@ +KDE_RPATH = @KDE_RPATH@ +KDE_USE_CLOSURE_FALSE = @KDE_USE_CLOSURE_FALSE@ +KDE_USE_CLOSURE_TRUE = @KDE_USE_CLOSURE_TRUE@ +KDE_USE_FINAL_FALSE = @KDE_USE_FINAL_FALSE@ +KDE_USE_FINAL_TRUE = @KDE_USE_FINAL_TRUE@ +KDE_USE_FPIE = @KDE_USE_FPIE@ +KDE_USE_NMCHECK_FALSE = @KDE_USE_NMCHECK_FALSE@ +KDE_USE_NMCHECK_TRUE = @KDE_USE_NMCHECK_TRUE@ +KDE_USE_PIE = @KDE_USE_PIE@ +KDE_XSL_STYLESHEET = @KDE_XSL_STYLESHEET@ +LDFLAGS = @LDFLAGS@ +LDFLAGS_AS_NEEDED = @LDFLAGS_AS_NEEDED@ +LDFLAGS_NEW_DTAGS = @LDFLAGS_NEW_DTAGS@ +LIBCOMPAT = @LIBCOMPAT@ +LIBCRYPT = @LIBCRYPT@ +LIBDL = @LIBDL@ +LIBJPEG = @LIBJPEG@ +LIBOBJS = @LIBOBJS@ +LIBPNG = @LIBPNG@ +LIBPTHREAD = @LIBPTHREAD@ +LIBRESOLV = @LIBRESOLV@ +LIBS = @LIBS@ +LIBSM = @LIBSM@ +LIBSOCKET = @LIBSOCKET@ +LIBTOOL = @LIBTOOL@ +LIBUCB = @LIBUCB@ +LIBUTIL = @LIBUTIL@ +LIBZ = @LIBZ@ +LIB_KAB = @LIB_KAB@ +LIB_KABC = @LIB_KABC@ +LIB_KDECORE = @LIB_KDECORE@ +LIB_KDED = @LIB_KDED@ +LIB_KDEPIM = @LIB_KDEPIM@ +LIB_KDEPRINT = @LIB_KDEPRINT@ +LIB_KDEUI = @LIB_KDEUI@ +LIB_KDNSSD = @LIB_KDNSSD@ +LIB_KFILE = @LIB_KFILE@ +LIB_KFM = @LIB_KFM@ +LIB_KHTML = @LIB_KHTML@ +LIB_KIMPROXY = @LIB_KIMPROXY@ +LIB_KIO = @LIB_KIO@ +LIB_KJS = @LIB_KJS@ +LIB_KNEWSTUFF = @LIB_KNEWSTUFF@ +LIB_KPARTS = @LIB_KPARTS@ +LIB_KSPELL = @LIB_KSPELL@ +LIB_KSYCOCA = @LIB_KSYCOCA@ +LIB_KUNITTEST = @LIB_KUNITTEST@ +LIB_KUTILS = @LIB_KUTILS@ +LIB_POLL = @LIB_POLL@ +LIB_QPE = @LIB_QPE@ +LIB_QT = @LIB_QT@ +LIB_SMB = @LIB_SMB@ +LIB_X11 = @LIB_X11@ +LIB_XEXT = @LIB_XEXT@ +LIB_XRENDER = @LIB_XRENDER@ +LN_S = @LN_S@ +LTLIBOBJS = @LTLIBOBJS@ +MAKEINFO = @MAKEINFO@ +MAKEKDEWIDGETS = @MAKEKDEWIDGETS@ +MCOPIDL = @MCOPIDL@ +MEINPROC = @MEINPROC@ +MKDIR_P = @MKDIR_P@ +MOC = @MOC@ +MSGFMT = @MSGFMT@ +NOOPT_CFLAGS = @NOOPT_CFLAGS@ +NOOPT_CXXFLAGS = @NOOPT_CXXFLAGS@ +OBJEXT = @OBJEXT@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +PERL = @PERL@ +PKG_CONFIG = @PKG_CONFIG@ +QTE_NORTTI = @QTE_NORTTI@ +QT_INCLUDES = @QT_INCLUDES@ +QT_LDFLAGS = @QT_LDFLAGS@ +RANLIB = @RANLIB@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +TOPSUBDIRS = @TOPSUBDIRS@ +UIC = @UIC@ +UIC_TR = @UIC_TR@ +USER_INCLUDES = @USER_INCLUDES@ +USER_LDFLAGS = @USER_LDFLAGS@ +USE_EXCEPTIONS = @USE_EXCEPTIONS@ +USE_RTTI = @USE_RTTI@ +USE_THREADS = @USE_THREADS@ +VERSION = @VERSION@ +WOVERLOADED_VIRTUAL = @WOVERLOADED_VIRTUAL@ +XGETTEXT = @XGETTEXT@ +XMKMF = @XMKMF@ +XMLLINT = @XMLLINT@ +X_EXTRA_LIBS = @X_EXTRA_LIBS@ +X_INCLUDES = @X_INCLUDES@ +X_LDFLAGS = @X_LDFLAGS@ +X_PRE_LIBS = @X_PRE_LIBS@ +X_RPATH = @X_RPATH@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_CXX = @ac_ct_CXX@ +ac_ct_F77 = @ac_ct_F77@ +all_includes = @all_includes@ +all_libraries = @all_libraries@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +kde_appsdir = @kde_appsdir@ +kde_bindir = @kde_bindir@ +kde_confdir = @kde_confdir@ +kde_datadir = @kde_datadir@ +kde_htmldir = @kde_htmldir@ +kde_icondir = @kde_icondir@ +kde_includes = @kde_includes@ +kde_kcfgdir = @kde_kcfgdir@ +kde_libraries = @kde_libraries@ +kde_libs_htmldir = @kde_libs_htmldir@ +kde_libs_prefix = @kde_libs_prefix@ +kde_locale = @kde_locale@ +kde_mimedir = @kde_mimedir@ +kde_moduledir = @kde_moduledir@ +kde_qtver = @kde_qtver@ +kde_servicesdir = @kde_servicesdir@ +kde_servicetypesdir = @kde_servicetypesdir@ +kde_sounddir = @kde_sounddir@ +kde_styledir = @kde_styledir@ +kde_templatesdir = @kde_templatesdir@ +kde_wallpaperdir = @kde_wallpaperdir@ +kde_widgetdir = @kde_widgetdir@ +kdeinitdir = @kdeinitdir@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +qt_includes = @qt_includes@ +qt_libraries = @qt_libraries@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target = @target@ +target_alias = @target_alias@ +target_cpu = @target_cpu@ +target_os = @target_os@ +target_vendor = @target_vendor@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +x_includes = @x_includes@ +x_libraries = @x_libraries@ +xdg_appsdir = @xdg_appsdir@ +xdg_directorydir = @xdg_directorydir@ +xdg_menudir = @xdg_menudir@ +KDE_LANG = ta +#>- SUBDIRS = $(AUTODIRS) +#>+ 1 +SUBDIRS =. +#>- POFILES = AUTO +#>+ 2 +POFILES = k3b.po libk3b.po libk3bdevice.po k3bsetup.po +GMOFILES = k3b.gmo libk3b.gmo libk3bdevice.gmo k3bsetup.gmo +#>- all: all-recursive +#>+ 1 +all: all-nls docs-am all-recursive + +.SUFFIXES: +$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) +#>- @for dep in $?; do \ +#>- case '$(am__configure_deps)' in \ +#>- *$$dep*) \ +#>- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ +#>- && exit 0; \ +#>- exit 1;; \ +#>- esac; \ +#>- done; \ +#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu ta/messages/Makefile'; \ +#>- cd $(top_srcdir) && \ +#>- $(AUTOMAKE) --gnu ta/messages/Makefile +#>+ 12 + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu ta/messages/Makefile'; \ + cd $(top_srcdir) && \ + $(AUTOMAKE) --gnu ta/messages/Makefile + cd $(top_srcdir) && perl admin/am_edit ta/messages/Makefile.in +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + +# This directory's subdirectories are mostly independent; you can cd +# into them and run `make' without going through this Makefile. +# To change the values of `make' variables: instead of editing Makefiles, +# (1) if the variable is set in `config.status', edit `config.status' +# (which will cause the Makefiles to be regenerated when you run `make'); +# (2) otherwise, pass the desired values on the `make' command line. +$(RECURSIVE_TARGETS): + @failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ + *=* | --[!k]*);; \ + *k*) failcom='fail=yes';; \ + esac; \ + done; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + dot_seen=yes; \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +$(RECURSIVE_CLEAN_TARGETS): + @failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ + *=* | --[!k]*);; \ + *k*) failcom='fail=yes';; \ + esac; \ + done; \ + dot_seen=no; \ + case "$@" in \ + distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ + *) list='$(SUBDIRS)' ;; \ + esac; \ + rev=''; for subdir in $$list; do \ + if test "$$subdir" = "."; then :; else \ + rev="$$subdir $$rev"; \ + fi; \ + done; \ + rev="$$rev ."; \ + target=`echo $@ | sed s/-recursive//`; \ + for subdir in $$rev; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done && test -z "$$fail" +tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + done +ctags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + done + +ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + mkid -fID $$unique +tags: TAGS + +TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ + if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ + empty_fix=.; \ + else \ + include_option=--include; \ + empty_fix=; \ + fi; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test ! -f $$subdir/TAGS || \ + tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$tags $$unique; \ + fi +ctags: CTAGS +CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + test -z "$(CTAGS_ARGS)$$tags$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$tags $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && cd $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) $$here + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + +#>- distdir: $(DISTFILES) +#>+ 1 +distdir: distdir-nls $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ + cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ + || cp -p $$d/$$file $(distdir)/$$file \ + || exit 1; \ + fi; \ + done + list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -d "$(distdir)/$$subdir" \ + || $(MKDIR_P) "$(distdir)/$$subdir" \ + || exit 1; \ + distdir=`$(am__cd) $(distdir) && pwd`; \ + top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ + (cd $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$$top_distdir" \ + distdir="$$distdir/$$subdir" \ + am__remove_distdir=: \ + am__skip_length_check=: \ + distdir) \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-recursive +all-am: Makefile +installdirs: installdirs-recursive +installdirs-am: +install: install-recursive +install-exec: install-exec-recursive +install-data: install-data-recursive +#>- uninstall: uninstall-recursive +#>+ 1 +uninstall: uninstall-nls uninstall-recursive + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-recursive +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +#>- clean: clean-recursive +#>+ 1 +clean: kde-rpo-clean clean-recursive + +#>- clean-am: clean-generic clean-libtool mostlyclean-am +#>+ 1 +clean-am: clean-bcheck clean-generic clean-libtool mostlyclean-am + +distclean: distclean-recursive + -rm -f Makefile +distclean-am: clean-am distclean-generic distclean-tags + +dvi: dvi-recursive + +dvi-am: + +html: html-recursive + +info: info-recursive + +info-am: + +#>- install-data-am: +#>+ 1 +install-data-am: install-nls + +install-dvi: install-dvi-recursive + +install-exec-am: + +install-html: install-html-recursive + +install-info: install-info-recursive + +install-man: + +install-pdf: install-pdf-recursive + +install-ps: install-ps-recursive + +installcheck-am: + +#>- maintainer-clean: maintainer-clean-recursive +#>+ 1 +maintainer-clean: clean-nls maintainer-clean-recursive + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-recursive + +mostlyclean-am: mostlyclean-generic mostlyclean-libtool + +pdf: pdf-recursive + +pdf-am: + +ps: ps-recursive + +ps-am: + +uninstall-am: + +.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ + install-strip + +.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ + all all-am check check-am clean clean-generic clean-libtool \ + ctags ctags-recursive distclean distclean-generic \ + distclean-libtool distclean-tags distdir dvi dvi-am html \ + html-am info info-am install install-am install-data \ + install-data-am install-dvi install-dvi-am install-exec \ + install-exec-am install-html install-html-am install-info \ + install-info-am install-man install-pdf install-pdf-am \ + install-ps install-ps-am install-strip installcheck \ + installcheck-am installdirs installdirs-am maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-generic \ + mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \ + uninstall uninstall-am + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: + +#>+ 2 +KDE_DIST=Makefile.in libk3bdevice.po libk3b.po k3b.po k3bsetup.po Makefile.am + +#>+ 13 +k3b.gmo: k3b.po + rm -f k3b.gmo; $(GMSGFMT) -o k3b.gmo $(srcdir)/k3b.po + test ! -f k3b.gmo || touch k3b.gmo +libk3b.gmo: libk3b.po + rm -f libk3b.gmo; $(GMSGFMT) -o libk3b.gmo $(srcdir)/libk3b.po + test ! -f libk3b.gmo || touch libk3b.gmo +libk3bdevice.gmo: libk3bdevice.po + rm -f libk3bdevice.gmo; $(GMSGFMT) -o libk3bdevice.gmo $(srcdir)/libk3bdevice.po + test ! -f libk3bdevice.gmo || touch libk3bdevice.gmo +k3bsetup.gmo: k3bsetup.po + rm -f k3bsetup.gmo; $(GMSGFMT) -o k3bsetup.gmo $(srcdir)/k3bsetup.po + test ! -f k3bsetup.gmo || touch k3bsetup.gmo + +#>+ 3 +clean-nls: + -rm -f k3b.gmo libk3b.gmo libk3bdevice.gmo k3bsetup.gmo + +#>+ 10 +install-nls: + $(mkinstalldirs) $(DESTDIR)$(kde_locale)/$(KDE_LANG)/LC_MESSAGES + @for base in k3b libk3b libk3bdevice k3bsetup ; do \ + echo $(INSTALL_DATA) $$base.gmo $(DESTDIR)$(kde_locale)/$(KDE_LANG)/LC_MESSAGES/$$base.mo ;\ + if test -f $$base.gmo; then $(INSTALL_DATA) $$base.gmo $(DESTDIR)$(kde_locale)/$(KDE_LANG)/LC_MESSAGES/$$base.mo ;\ + elif test -f $(srcdir)/$$base.gmo; then $(INSTALL_DATA) $(srcdir)/$$base.gmo $(DESTDIR)$(kde_locale)/$(KDE_LANG)/LC_MESSAGES/$$base.mo ;\ + fi ;\ + done + + +#>+ 6 +uninstall-nls: + rm -f $(DESTDIR)$(kde_locale)/$(KDE_LANG)/LC_MESSAGES/k3b.mo + rm -f $(DESTDIR)$(kde_locale)/$(KDE_LANG)/LC_MESSAGES/libk3b.mo + rm -f $(DESTDIR)$(kde_locale)/$(KDE_LANG)/LC_MESSAGES/libk3bdevice.mo + rm -f $(DESTDIR)$(kde_locale)/$(KDE_LANG)/LC_MESSAGES/k3bsetup.mo + +#>+ 2 +all-nls: $(GMOFILES) + +#>+ 8 +distdir-nls:$(GMOFILES) + for file in $(POFILES); do \ + cp $(srcdir)/$$file $(distdir); \ + done + for file in $(GMOFILES); do \ + cp $(srcdir)/$$file $(distdir); \ + done + +#>+ 2 +docs-am: + +#>+ 15 +force-reedit: + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu ta/messages/Makefile'; \ + cd $(top_srcdir) && \ + $(AUTOMAKE) --gnu ta/messages/Makefile + cd $(top_srcdir) && perl admin/am_edit ta/messages/Makefile.in + + +#>+ 21 +clean-bcheck: + rm -f *.bchecktest.cc *.bchecktest.cc.class a.out + +bcheck: bcheck-recursive + +bcheck-am: + @for i in ; do \ + if test $(srcdir)/$$i -nt $$i.bchecktest.cc; then \ + echo "int main() {return 0;}" > $$i.bchecktest.cc ; \ + echo "#include \"$$i\"" >> $$i.bchecktest.cc ; \ + echo "$$i"; \ + if ! $(CXX) $(DEFS) -I. -I$(srcdir) -I$(top_builddir) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(CXXFLAGS) $(KDE_CXXFLAGS) --dump-class-hierarchy -c $$i.bchecktest.cc; then \ + rm -f $$i.bchecktest.cc; exit 1; \ + fi ; \ + echo "" >> $$i.bchecktest.cc.class; \ + perl $(top_srcdir)/admin/bcheck.pl $$i.bchecktest.cc.class || { rm -f $$i.bchecktest.cc; exit 1; }; \ + rm -f a.out; \ + fi ; \ + done + + +#>+ 3 +final: + $(MAKE) all-am + +#>+ 3 +final-install: + $(MAKE) install-am + +#>+ 3 +no-final: + $(MAKE) all-am + +#>+ 3 +no-final-install: + $(MAKE) install-am + +#>+ 3 +kde-rpo-clean: + -rm -f *.rpo + +#>+ 3 +nmcheck: +nmcheck-am: nmcheck |