Use TDE hardware library instead of HAL when HAL is not available

Clean up spurious build files

1 files changed, 0 insertions, 1258 deletions

diff --git a/configure.in b/configure.in
deleted file mode 100644
index 14cea0f..0000000
--- a/configure.in
+++ /dev/null
@@ -1,1258 +0,0 @@
-dnl =======================================================
-dnl FILE: ./admin/configure.in.min
-dnl =======================================================
-
-dnl    This file is part of the KDE libraries/packages
-dnl    Copyright (C) 2001 Stephan Kulow (coolo@kde.org)
- 
-dnl    This file is free software; you can redistribute it and/or
-dnl    modify it under the terms of the GNU Library General Public
-dnl    License as published by the Free Software Foundation; either
-dnl    version 2 of the License, or (at your option) any later version.
- 
-dnl    This library is distributed in the hope that it will be useful,
-dnl    but WITHOUT ANY WARRANTY; without even the implied warranty of
-dnl    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-dnl    Library General Public License for more details.
- 
-dnl    You should have received a copy of the GNU Library General Public License
-dnl    along with this library; see the file COPYING.LIB.  If not, write to
-dnl    the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
-dnl    Boston, MA 02110-1301, USA.
-
-# Original Author was Kalle@kde.org
-# I lifted it in some mater. (Stephan Kulow)
-# I used much code from Janos Farkas
-
-dnl Process this file with autoconf to produce a configure script.
-
-AC_INIT(acinclude.m4) dnl a source file from your sub dir
-
-dnl This is so we can use kde-common
-AC_CONFIG_AUX_DIR(admin)
-
-dnl This ksh/zsh feature conflicts with `cd blah ; pwd`
-unset CDPATH
-
-dnl Checking host/target/build systems, for make, install etc.
-AC_CANONICAL_SYSTEM 
-dnl Perform program name transformation
-AC_ARG_PROGRAM
-
-dnl Automake doc recommends to do this only here. (Janos)
-AM_INIT_AUTOMAKE(k3b-1.0.5, "3.5.9") dnl searches for some needed programs
-
-KDE_SET_PREFIX
-
-dnl generate the config header
-AM_CONFIG_HEADER(config.h) dnl at the distribution this done
-
-dnl Checks for programs.
-AC_CHECK_COMPILERS
-AC_ENABLE_SHARED(yes)
-AC_ENABLE_STATIC(no)
-KDE_PROG_LIBTOOL
-
-dnl for NLS support. Call them in this order!
-dnl WITH_NLS is for the po files
-AM_KDE_WITH_NLS
-
-KDE_USE_QT(3.2)
-AC_PATH_KDE
-dnl =======================================================
-dnl FILE: configure.in.in
-dnl =======================================================
-
-#MIN_CONFIG(3.2)
-#AM_KDE_MIN_VERSION(3.4)
-
-AC_CHECK_HEADERS(byteswap.h)
-
-dnl - check the byte order -
-dnl this will define WORDS_BIGENDIAN or do nothing
-AC_C_BIGENDIAN()
-
-AC_ARG_WITH(
-	external-libsamplerate,
-	[  --with-external-libsamplerate   use the libsamplerate provided by the system (default=yes)],
-	[external_sampletrate=$withval], 
-	[external_sampletrate=yes]
-)
-
-LIBSAMPLERATE=""
-
-if test x$external_sampletrate != xno; then
-
-dnl === check for libsamplerate ==========
-KDE_CHECK_HEADERS(samplerate.h, [
-	KDE_CHECK_LIB(samplerate, src_new, [
-		LIBSAMPLERATE="-lsamplerate"	
-		AC_DEFINE(HAVE_LIBSAMPLERATE,1,[defined if you have libsamplerate library and header])
-	])
-])
-
-fi
-
-AC_SUBST(LIBSAMPLERATE)
-AM_CONDITIONAL(compile_libsamplerate, [test -z "$LIBSAMPLERATE"])
-
-
-ARTS_LIBS=""
-if test "x$build_arts" = "xyes"; then
-	dnl Find aRts
-	KDE_CHECK_HEADERS(artsc/artsc.h,
-		[arts_available=yes
-	 	 ARTS_LIBS="-lartsc"],
-		[arts_available=no]
-	)
-fi
-AC_SUBST(ARTS_LIBS)
-AM_CONDITIONAL(include_arts, [test -n "$ARTS_LIBS"])
-if test "x$build_arts" = "xyes" -a "x$arts_available" = "xyes"; then
-	AC_DEFINE(WITH_ARTS,1,[defined if arts support is compiled in])
-fi
-
-KDE_CHECK_THREADING
-
-compile_k3bsetup=yes
-AC_ARG_WITH(
-	k3bsetup, 
-	[  --with-k3bsetup[=ARG]     do compile K3bSetup2 KControl Module (default=yes)],
-	[compile_k3bsetup=$withval]
-)
-
-if test x$compile_k3bsetup = xyes; then
-        AC_DEFINE(HAVE_K3BSETUP,1,[defined if K3bSetup is compiled])
-fi
-
-AM_CONDITIONAL(with_k3bsetup1, [test x$compile_k3bsetup = xyes])
-
-
-cdrecord_suid_root=yes
-AC_ARG_WITH(
-	cdrecord-suid-root, 
-	AS_HELP_STRING(
-		[--without-cdrecord-suid-root], 
-		[enable or disable K3b's suid root check for cdrecord/cdrdao/wodim (default=enabled)]),
-	[cdrecord_suid_root=$withval], 
-	[cdrecord_suid_root=yes]
-)
-if test x$cdrecord_suid_root = xyes; then
-	AC_DEFINE(CDRECORD_SUID_ROOT_CHECK,1,[defined if K3b should check cdrecord for suid root])
-fi
-
-
-# Extra SCSI support libs can go in CAM_LIB, and are linked into
-# libk3bdevice. For Linux, nothing is needed. FreeBSD requires -lcam
-# (which is in base, so no test is needed).
-case "$host_os" in
-freebsd* | dragonfly*)
-	CAM_LIB="-lcam"
-	;;
-*)
-	CAM_LIB=""
-	;;
-esac
-AC_SUBST(CAM_LIB)
-
-
-
-dnl ---------- TAGLIB CHECK ----------
-
-AC_DEFUN([AC_HAVE_TAGLIB],
-[
-    AC_DEFINE(HAVE_TAGLIB, 1, [have TagLib])
-    taglib_includes=[`$TAGLIB_CONFIG --cflags`]
-    taglib_libs=[`$TAGLIB_CONFIG --libs`]
-    have_taglib=true
-])
-
-AC_DEFUN([AC_NO_TAGLIB],
-[
-    taglib_includes=""
-    taglib_libs=""
-    have_taglib=false
-])
-
-AC_PATH_PROG(TAGLIB_CONFIG, taglib-config, [no], [$PATH:$prefix/bin])
-if test "x$TAGLIB_CONFIG" = "xno" ; then
-    AC_NO_TAGLIB
-else
-    AC_HAVE_TAGLIB
-fi
-
-AC_SUBST(taglib_includes)
-AC_SUBST(taglib_libs)
-
-dnl ---------- END TAGLIB CHECK ----------
-
-
-
-dnl ----------- TUNEPIMP/MUSICBRAINZ CHECK -----------
-
-AC_ARG_WITH(
-	musicbrainz, 
-	AS_HELP_STRING(
-		[--without-musicbrainz], 
-		[build K3b without Musicbrainz support (default=no)]),
-	[ac_cv_use_musicbrainz=$withval], 
-	[ac_cv_use_musicbrainz=yes]
-)
-
-have_mb=false
-MUSICBRAINZ_LIBS=""
-if test "$ac_cv_use_musicbrainz" = "yes"; then
-  KDE_CHECK_HEADER(musicbrainz/mb_c.h,
-  [
-	KDE_CHECK_LIB(musicbrainz,mb_New,[
-        	AC_DEFINE(HAVE_MUSICBRAINZ, 1, [have MusicBrainz])
-        	MUSICBRAINZ_LIBS="-lmusicbrainz"
-		have_mb=true
-        ])
-  ], [])
-fi
-AC_SUBST(MUSICBRAINZ_LIBS)
-
-dnl --------- TUNEPIMP/MUSICBRAINZ CHECK END -----------
-
-
-dnl --------- K3b debugging stuff (only for developers) ----
-
-AC_ARG_WITH(
-	k3b-debug, 
-	AS_HELP_STRING(
-		[--with-k3b-debug], 
-		[Enable additional K3b debugging output and functionality (default=no)]),
-	[use_k3b_debug=$withval], 
-	[use_k3b_debug=no]
-)
-if test "$use_k3b_debug" = "yes"; then
-	AC_DEFINE(K3B_DEBUG, "1", [K3b additional debugging support])
-fi
-
-dnl --------------------------------------------------------
-
-
-
-
-dnl --------------- libiconv check -------------------------
-
-AC_CHECK_HEADERS(iconv.h)
-
-dnl --------------------------------------------------------
-
-
-#AC_DEFINE(LIBK3B_VERSION, "0.11.98", [k3b library version])
-#AC_SUBST(LIBK3B_VERSION, 0.11.98)
-#AC_CONFIG_FILES([k3b/libk3b/libk3b.pc])
-
-KDE_ENABLE_HIDDEN_VISIBILITY
-dnl =======================================================
-dnl FILE: ./libk3b/configure.in.in
-dnl =======================================================
-
-AC_CHECK_FUNCS(stat64)
-AC_CHECK_HEADERS(sys/vfs.h)
-AC_CHECK_HEADERS(sys/statvfs.h)
-dnl =======================================================
-dnl FILE: ./libk3b/plugin/libsamplerate/configure.in.in
-dnl =======================================================
-
-LIBS="-lm $all_libraries"
-
-AC_CHECK_DECL(lrint,
-          AC_DEFINE(HAVE_LRINT,1,[Define if lrint is supported]),
-          AC_DEFINE(HAVE_LRINT,0,[Define if lrint is not supported]),
-          [#include <math.h>]
-)
-
-AC_CHECK_DECL(lrintf,
-          AC_DEFINE(HAVE_LRINTF,1,[Define if lrintf is supported]),
-          AC_DEFINE(HAVE_LRINTF,0,[Define if lrintf is not supported]),
-          [#include <math.h>]
-)
-dnl =======================================================
-dnl FILE: ./libk3b/videodvd/configure.in.in
-dnl =======================================================
-
-AC_ARG_WITH(
-	libdvdread, 
-	AS_HELP_STRING(
-		[--without-libdvdread], 
-		[build K3b without libdvdread (Video DVD ripping) support (default=no)]),
-	[ac_cv_use_libdvdread=$withval], 
-	[ac_cv_use_libdvdread=yes]
-)
-
-have_libdvdread=no
-if test "$ac_cv_use_libdvdread" = "yes"; then
-	KDE_CHECK_HEADERS(dvdread/dvd_reader.h, 
-	[
-		AC_CHECK_LIB(dvdread,
-			DVDOpen,
-			[
-        	           AC_DEFINE(HAVE_LIBDVDREAD,1,[Defined if you have libdvdread headers and libs installed.])
-	        	   have_libdvdread=yes
-			]
-		)
-	])
-fi
-AM_CONDITIONAL(include_videodvdrip, [test x$have_libdvdread = xyes])
-
-#if test "$have_libdvdread" = "no"; then
-#   AC_MSG_ERROR([Could not find libdvdread. Please install.])
-#   DO_NOT_COMPILE="$DO_NOT_COMPILE k3b"
-#fi
-dnl =======================================================
-dnl FILE: ./libk3bdevice/configure.in.in
-dnl =======================================================
-
-dnl FIXME: only make the linux header check on linux systems.
-
-linux_scsi=no
-AC_MSG_CHECKING(for linux scsi headers)
-AC_LANG_SAVE
-AC_LANG_CPLUSPLUS
-AC_TRY_COMPILE([
-	#include <linux/version.h>
-	#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,50)
-	typedef unsigned char u8;
-	#endif
-	#include <sys/types.h>
-	#include <linux/../scsi/scsi.h> /* cope with silly includes */
-	],
-	[],
-	[linux_scsi=yes])
-AC_MSG_RESULT($linux_scsi)
-
-case "$host_os" in
-freebsd*|dragonfly*)
-	# I'll be damned if lousy coding prevents us from running
-	# this application.
-	linux_scsi=yes
-	;;
-esac
-
-if test "x$linux_scsi" = "xno" ; then
-	DO_NOT_COMPILE="$DO_NOT_COMPILE k3b"
-fi
-AC_LANG_RESTORE
-
-dnl - find the cam_* functions
-AC_CHECK_FUNC(cam_close_device,
-	[CAM_LIB=""],
-	[AC_CHECK_LIB(cam, cam_close_device, [CAM_LIB=-lcam], [CAM_LIB=""])]
-	)
-AC_SUBST(CAM_LIB)
-
-
-
-dnl === check for resmgr - begin ============
-AC_ARG_WITH(
-	resmgr, 
-	AS_HELP_STRING([--without-resmgr], [build K3b without ResMgr support (default=no)]), 
-	[ac_cv_use_resmgr=$withval], 
-	[ac_cv_use_resmgr=yes]
-)
-
-if test "$ac_cv_use_resmgr" = "yes"; then
-  RESMGR_LIB=""
-  KDE_CHECK_HEADERS(resmgr.h, [
-         KDE_CHECK_LIB(resmgr,rsm_open_device,[
-                 RESMGR_LIB="-lresmgr"
-                 AC_DEFINE(HAVE_RESMGR,1,[defined if you have resmgr libraries and headers])
-         ])
-  ])
-  AC_SUBST(RESMGR_LIB)
-fi
-dnl === check for resmgr - end ============
-
-
-
-
-
-# HAL check from tdebase/tdeioslave/media
-
-AC_ARG_WITH(
-	hal, 
-	AS_HELP_STRING(
-		[--without-hal], 
-		[build K3b without HAL support (default=no)]),
-	[ac_cv_use_hal=$withval], 
-	[ac_cv_use_hal=yes]
-)
-
-if test "x$ac_cv_use_hal" = "xyes" ; then
-
-########### Check for the HAL
-
-  AC_MSG_CHECKING(for the HAL)
-
-  hal_inc=NOTFOUND
-  hal_lib=NOTFOUND
-  hal=NOTFOUND
-
-  search_incs="$kde_includes /usr/include /usr/include/hal /usr/local/include /usr/local/include/hal"
-  AC_FIND_FILE(libhal.h libhal-storage.h, $search_incs, hal_incdir)
-
-  if [test -r $hal_incdir/libhal.h] ; then
-    HAL_INCS="-I$hal_incdir"
-    hal_inc=FOUND
-  fi
-
-  if test -r $hal_incdir/libhal-storage.h ; then
-    hal_storage_version=4
-    grep LibHalVolume $hal_incdir/libhal-storage.h \
-    > /dev/null 2>&1 && hal_storage_version=5
-    if test $hal_storage_version = 4 ; then
-      AC_DEFINE(HAL_0_4, , [HAL API version 0.4])
-    fi
-  fi
-
-  search_libs="$kde_libraries /usr/lib64 /usr/lib /usr/local/lib /lib /lib64"
-  AC_FIND_FILE(libhal.so, $search_libs, hal_libdir)
-
-  if [test -r $hal_libdir/libhal.so] ; then
-    HAL_LIBS="-L$hal_libdir -lhal"
-    hal_lib=FOUND
-  fi
-
-
-  if [test $hal_inc = FOUND] && [test $hal_lib = FOUND] ; then
-      AC_MSG_RESULT(headers $hal_incdir  libraries $hal_libdir)
-  	hal=FOUND
-  else
-      AC_MSG_RESULT(searched but not found)
-  fi
-
-  AC_SUBST(HAL_INCS)
-  AC_SUBST(HAL_LIBS)
-
-
-########### Check for DBus
-
-  AC_MSG_CHECKING(for DBus)
-
-  dbus_inc=NOTFOUND
-  dbus_lib=NOTFOUND
-  dbus=NOTFOUND
-
-  search_incs="$kde_includes /usr/include /usr/include/dbus-1.0 /usr/local/include /usr/local/include/dbus-1.0"
-  AC_FIND_FILE(dbus/dbus.h, $search_incs, dbus_incdir)
-
-  search_incs_arch_deps="$kde_includes /usr/lib64/dbus-1.0/include /usr/lib/dbus-1.0/include /usr/local/lib/dbus-1.0/include"
-  AC_FIND_FILE(dbus/dbus-arch-deps.h, $search_incs_arch_deps, dbus_incdir_arch_deps)
-
-  if [test -r $dbus_incdir/dbus/dbus.h] && [test -r $dbus_incdir_arch_deps/dbus/dbus-arch-deps.h] ; then
-    DBUS_INCS="-I$dbus_incdir -I$dbus_incdir_arch_deps"
-    dbus_inc=FOUND
-  fi
-
-  search_libs="$kde_libraries /usr/lib64 /usr/lib /usr/local/lib /lib /lib64"
-  AC_FIND_FILE(libdbus-1.so, $search_libs, dbus_libdir)
-
-  if test -r $dbus_libdir/libdbus-1.so ; then
-    DBUS_LIBS="-L$dbus_libdir -ldbus-1"
-    dbus_lib=FOUND
-  fi
-
-  if [test $dbus_inc = FOUND] && [test $dbus_lib = FOUND] ; then
-    AC_MSG_RESULT(headers $dbus_incdir $dbus_incdir_arch_deps  libraries $dbus_libdir)
-    dbus=FOUND
-  else
-    AC_MSG_RESULT(searched but not found)
-  fi
-
-  AC_SUBST(DBUS_INCS)
-  AC_SUBST(DBUS_LIBS)
-
-########### Check for DBus-Qt bindings
-
-  AC_MSG_CHECKING(for DBus-Qt bindings)
-
-  dbusqt_inc=NOTFOUND
-  dbusqt_lib=NOTFOUND
-  dbusqt=NOTFOUND
-
-  search_incs="$kde_includes /usr/include /usr/include/dbus-1.0 /usr/local/include /usr/local/include/dbus-1.0"
-  AC_FIND_FILE(dbus/connection.h, $search_incs, dbusqt_incdir)
-
-  if test -r $dbusqt_incdir/dbus/connection.h ; then
-    have_qt_patch=0
-    grep dbus_connection_setup_with_qt_main $dbusqt_incdir/dbus/connection.h \
-    > /dev/null 2>&1 && have_qt_patch=1
-    if test $have_qt_patch = 1 ; then
-      DBUSQT_INCS="-I$dbusqt_incdir"
-      dbusqt_inc=FOUND
-    fi
-  fi
-
-  search_libs="$kde_libraries /usr/lib /usr/lib64 /usr/local/lib"
-  AC_FIND_FILE(libdbus-qt-1.so, $search_libs, dbusqt_libdir)
-
-  if test -r $dbusqt_libdir/libdbus-qt-1.so ; then
-    DBUSQT_LIBS="-L$dbusqt_libdir -ldbus-qt-1"
-    dbusqt_lib=FOUND
-  fi
-
-  if [test $dbusqt_inc = FOUND] && [test $dbusqt_lib = FOUND] ; then
-    AC_MSG_RESULT(headers $dbusqt_incdir libraries $dbusqt_libdir)
-    dbusqt=FOUND
-  else
-    AC_MSG_RESULT(searched but not found)
-  fi
-
-  AC_SUBST(DBUSQT_INCS)
-  AC_SUBST(DBUSQT_LIBS)
-fi
-
-########### Check if media HAL backend sould be compiled
-
-have_hal=no
-HAL_DBUS_LIBS=""
-if [test "x$hal" = "xFOUND"] && [test "x$dbus" = "xFOUND"] && [test "x$dbusqt" = "xFOUND"] && [ test $hal_storage_version = 5 ] ; then
-  AC_DEFINE(HAVE_HAL, , [compile in HAL support])
-  have_hal=yes
-  HAL_DBUS_LIBS="$HAL_LIBS $DBUS_LIBS $DBUSQT_LIBS"
-fi
-
-AM_CONDITIONAL(include_HAL, [test x$have_hal = xyes])
-AC_SUBST(HAL_DBUS_LIBS)
-
-dnl =======================================================
-dnl FILE: ./plugins/audiooutput/alsa/configure.in.in
-dnl =======================================================
-
-dnl --------- ALSA CHECK BEGIN -------------
-
-AC_DEFUN([KDE_CHECK_ALSA],
-[
-  PKG_CHECK_MODULES([ALSA], [alsa >= 0.9], [have_alsa=yes], [have_alsa=no])
-  AC_SUBST([ALSA_CFLAGS])
-  AC_SUBST([ALSA_LIBS])
-])
-
-AC_ARG_WITH(alsa,
-  [AS_HELP_STRING(--with-alsa,
-    [enable support for ALSA output @<:@default=check@:>@])],
-  [], with_alsa=check)
-
-have_alsa=no
-if test "x$with_alsa" != xno; then
-  KDE_CHECK_ALSA
-
-  if test "x$with_alsa" != xcheck && test "x$have_alsa" != xyes; then
-    AC_MSG_FAILURE([--with-alsa was given, but test for ALSA failed])
-  fi
-fi
-
-AM_CONDITIONAL(include_ALSA, [test "x$have_alsa" = "xyes"])
-
-dnl --------- ALSA CHECK END ---------------
-dnl =======================================================
-dnl FILE: ./plugins/decoder/ffmpeg/configure.in.in
-dnl =======================================================
-
-dnl --------------- FFMPEG CHECK ---------------------------------
-
-AC_ARG_WITH(
-	ffmpeg, 
-	AS_HELP_STRING(
-		[--without-ffmpeg], 
-		[build K3b without ffmpeg audio decoder support (default=no)]),
-	[ac_cv_use_ffmpeg=$withval], 
-	[ac_cv_use_ffmpeg=yes]
-)
-
-#
-# The ffmpeg decoder plugin needs ffmpeg 0.4.9 or higher
-#
-have_ffmpeg=no
-if test "$ac_cv_use_ffmpeg" = "yes"; then
-	k3b_cxxflags_save="$CXXFLAGS"
-	CXXFLAGS="$CXXFLAGS -D__STDC_CONSTANT_MACROS"
-	AC_MSG_CHECKING(for ffmpeg >= 0.4.9)
-	AC_LANG_SAVE
-	AC_LANG_CPLUSPLUS
-	AC_COMPILE_IFELSE( 
-		extern "C" {
-		#include <libavformat/avformat.h>
-		#include <libavcodec/avcodec.h>
-		}
-
-		int main() {
-		  AVFormatContext* fc = 0;
-		  AVPacket* p = 0;
-		  av_register_all();
-		  return av_read_frame( fc, p );
-		},
-	[ffmpeg_compiles=yes], [ffmpeg_compiles=no] )
-	OLD_LIBS=$LIBS
-	LIBS="-lavformat -lavcodec $LIBS"
-	AC_LINK_IFELSE( 
-		extern "C" {
-		#include <libavformat/avformat.h>
-		#include <libavcodec/avcodec.h>
-		}
-
-		int main() {
-		  AVFormatContext* fc = 0;
-		  AVPacket* p = 0;
-		  av_register_all();
-		  return av_read_frame( fc, p );
-		},
-	[ffmpeg_links=yes], [ffmpeg_links=no] )
-	AC_LANG_RESTORE
-	LIBS=$OLD_LIBS
-	have_ffmpeg=$ffmpeg_links
-	AC_MSG_RESULT($have_ffmpeg)
-	CXXFLAGS=$k3b_cxxflags_save
-fi
-AM_CONDITIONAL(include_FFMPEG, [test x$have_ffmpeg = xyes])
-
-dnl --------------- FFMPEG CHECK END ------------------------------
-
-AC_ARG_ENABLE(
-	ffmpeg-all-codecs, 
-	AS_HELP_STRING(
-		[--enable-ffmpeg-all-codecs], 
-		[Build K3b's ffmeg decoder plugin with all audio codecs enabled (default=disabled)]),
-	[AC_DEFINE(K3B_FFMPEG_ALL_CODECS, 1, [Defined if all ffmpeg codecs should be allowed])
-	 enable_ffmpeg_all_codecs=yes], 
-	[enable_ffmpeg_all_codecs=no]
-)
-dnl =======================================================
-dnl FILE: ./plugins/decoder/flac/configure.in.in
-dnl =======================================================
-
-dnl === test for FLAC++ and FLAC - begin ====
-AC_ARG_WITH(
-	flac, 
-	AS_HELP_STRING([--without-flac], [build K3b without FLAC support (default=no)]), 
-	[ac_cv_use_flac=$withval], 
-	[ac_cv_use_flac=yes]
-)
-
-have_flac=no
-if test "$ac_cv_use_flac" = "yes"; then
-  KDE_CHECK_HEADERS(FLAC++/decoder.h, [
-     AC_CHECK_LIB(FLAC,FLAC__stream_decoder_process_single,
-	        have_flac=yes,[],$all_libraries)])
-
-    AC_MSG_CHECKING(for libFLAC newer than 1.1.1)
-    AC_CACHE_VAL(k3b_flac_new,
-    [
-	AC_LANG_SAVE
-	AC_LANG_CPLUSPLUS
-	AC_TRY_COMPILE(
-	[
-		#include <FLAC++/metadata.h>
-	], [
-		FLAC::Metadata::VorbisComment* vc;
-		vc->get_vendor_string().get_field();
-	], k3b_flac_new=no, k3b_flac_new=yes )
-	AC_LANG_RESTORE
-    ])
-    AC_MSG_RESULT($k3b_flac_new)
-    if test $k3b_flac_new = yes; then
-	AC_DEFINE(FLAC_NEWER_THAN_1_1_1, 
-		1,
-		[Define to 1 if your flac library's version is newer than or equal to 1.1.2]
-	)
-    fi
-else
-    have_flac=no
-fi
-
-AM_CONDITIONAL(include_FLAC, [test x$have_flac = xyes])
-dnl === test for FLAC++ and FLAC - end ====
-dnl =======================================================
-dnl FILE: ./plugins/decoder/libsndfile/configure.in.in
-dnl =======================================================
-
-dnl === test for libsndfile - begin ===
-dnl
-dnl Don't use PKG_CHECK, since if there is no pkg-config installed,
-dnl then there is no auto* magic for it either.
-dnl
-dnl Tests copied from tdebase/tdeioslave/thumbnail/
-dnl
-if test -z "$PKG_CONFIG"; then
-    AC_PATH_PROG(PKG_CONFIG, pkg-config, no)
-fi
-
-AC_ARG_WITH(
-	sndfile, 
-	AS_HELP_STRING([--without-sndfile], 
-	[build K3b without libsndfile support (default=no)]), 
-	[ac_cv_use_sndfile=$withval], 
-	[ac_cv_use_sndfile=yes]
-)
-
-if test "$ac_cv_use_sndfile" = "yes"; then
-  SNDFILE_CFLAGS=""
-  SNDFILE_LIBS=""
-  if test "$PKG_CONFIG" = "no" ; then
-      ac_cv_sndfile=0
-      echo "*** The pkg-config script could not be found. Make sure it is"
-      echo "*** in your path, or set the PKG_CONFIG environment variable"
-      echo "*** to the full path to pkg-config."
-      echo "*** Or see http://www.freedesktop.org/software/pkgconfig to get pkg-config."
-  else
-      if !(`$PKG_CONFIG --exists sndfile`) ; then
-          echo "*** sndfile is not installed."
-          ac_cv_sndfile=0
-      else
-          if !(`$PKG_CONFIG --atleast-version="1.0.2" sndfile`) ; then
-              echo "*** You need at least version 1.0.2 of sndfile."
-              ac_cv_sndfile=0
-          else
-              ac_cv_sndfile=1
-              SNDFILE_CFLAGS=`$PKG_CONFIG --cflags sndfile`
-              SNDFILE_LIBS=`$PKG_CONFIG --libs sndfile`
-          fi
-      fi
-  fi
-
-  AC_DEFINE_UNQUOTED([HAVE_SNDFILE],${ac_cv_sndfile},
-  			[Set to 1 if you have libsndfile.])
-  AC_SUBST(SNDFILE_CFLAGS)
-  AC_SUBST(SNDFILE_LIBS)
-fi
-
-AM_CONDITIONAL(include_AIFF, [test x$ac_cv_sndfile = x1])
-dnl === test for libsndfile - end ===
-dnl =======================================================
-dnl FILE: ./plugins/decoder/mp3/configure.in.in
-dnl =======================================================
-
-dnl === libmad MPEG decoder check - begin ===
-AC_ARG_WITH(
-	libmad, 
-	AS_HELP_STRING([--without-libmad], [build K3b without libmad support (default=no)]), 
-	[ac_cv_use_libmad=$withval], 
-	[ac_cv_use_libmad=yes]
-)
-
-if test "$ac_cv_use_libmad" = "yes"; then
-  MAD_LIB=""
-  KDE_CHECK_HEADER(mad.h, [
-	AC_CHECK_LIB(mad, mad_synth_frame, [
-		MAD_LIB="-lmad"
-		AC_DEFINE(HAVE_LIBMAD,1,[defined if you have libmad headers and libraries])],
-		[],
-		$all_libraries
-	)
-  ])
-  AC_SUBST(MAD_LIB)
-
-fi
-
-AM_CONDITIONAL(include_MP3, [test -n "$MAD_LIB"])
-dnl === libmad MPeg decoder check - end ===
-dnl =======================================================
-dnl FILE: ./plugins/decoder/musepack/configure.in.in
-dnl =======================================================
-
-dnl --------- MUSEPACK CHECK ---------------
-
-AC_ARG_WITH(
-	musepack, 
-	AS_HELP_STRING(
-		[--without-musepack], 
-		[build K3b without Musepack audio support (default=no)]),
-	[ac_cv_use_mpc=$withval], 
-	[ac_cv_use_mpc=yes]
-)
-
-have_mpc=no
-if test "$ac_cv_use_mpc" = "yes"; then
-
-  dnl - search for both the new and the old naming -
-
-  KDE_CHECK_HEADERS(mpcdec/mpcdec.h, [
-  	AC_CHECK_LIB(mpcdec, mpc_decoder_setup, [
-  		have_mpc=yes
-		MPC_LIBS="-lmpcdec"
-		AC_DEFINE(
-			MPC_HEADER_FILE, 
-			<mpcdec/mpcdec.h>, 
-			[The header to include for MPC decoding.])
-		],
-		[], [], [])
-  ])
-
-  if test "$have_mpc" = "no"; then
-    KDE_CHECK_HEADERS(mpc/mpcdec.h, [
-        AC_CHECK_LIB(mpcdec, mpc_decoder_setup, [
-                have_mpc=yes
-                MPC_LIBS="-lmpcdec"
-                AC_DEFINE(
-                        MPC_HEADER_FILE,
-                        <mpc/mpcdec.h>,
-                        [The header to include for MPC decoding.])
-                ],
-                [], [], [])
-    ])
-  fi
-	
-  if test "$have_mpc" = "no"; then
-    KDE_CHECK_HEADERS(musepack/musepack.h, [
-    	  AC_CHECK_LIB(musepack, mpc_decoder_setup, [
-  		  have_mpc=yes
-		  MPC_LIBS="-lmusepack"
-		  AC_DEFINE(
-			  MPC_HEADER_FILE, 
-			  <musepack/musepack.h>, 
-			  [The header to include for MPC decoding.]
-		  )
-		  AC_DEFINE(
-			  mpc_bool_t,
-			  BOOL,
-			  [backwards compatibility stuff]
-		  )
-  		  ], [], [])
-    ])
-  fi
-fi
-AC_SUBST(MPC_LIBS)
-
-AM_CONDITIONAL(include_MPC, [test x$have_mpc = xyes])
-
-dnl --------- MUSEPACK CHECK END -----------
-dnl =======================================================
-dnl FILE: ./plugins/decoder/ogg/configure.in.in
-dnl =======================================================
-
-dnl === Ogg Vorbis Test - Begin ===
-AC_ARG_WITH(
-	oggvorbis, 
-	AS_HELP_STRING([--without-oggvorbis], [build K3b without OggVorbis support (default=no)]), 
-	[ac_cv_use_oggvorbis=$withval], 
-	[ac_cv_use_oggvorbis=yes]
-)
-
-if test "$ac_cv_use_oggvorbis" = "yes"; then
-
-  AC_MSG_CHECKING(for ogg/vorbis headers)
-  ogg_vorbis=no
-  AC_TRY_COMPILE([
-  		#include <vorbis/codec.h>
-  		#include <vorbis/vorbisfile.h>
-                ],[
-                ],[
-                ogg_vorbis=yes
-                ])
-  AC_MSG_RESULT($ogg_vorbis)
-  if test x$ogg_vorbis = xyes; then
-     dnl we need the ogg_vorbis_lib because otherwise we override LIBS !
-     AC_CHECK_LIB(vorbisfile,ov_open,ogg_vorbis_lib=yes,
-                  ogg_vorbis=no,[$all_libraries -lvorbisfile -lvorbis -logg])
-  fi
-  if test x$ogg_vorbis = xyes; then
-	AC_DEFINE(OGG_VORBIS,1,[Define if you have ogg/vorbis installed])
-  fi
-fi
-
-AM_CONDITIONAL(include_OGG, [test x$ogg_vorbis = xyes])
-dnl === Ogg Vorbis Test - End ===
-dnl =======================================================
-dnl FILE: ./plugins/encoder/lame/configure.in.in
-dnl =======================================================
-
-dnl === test for LAME - begin ====
-AC_ARG_WITH(
-	lame, 
-	AS_HELP_STRING([--without-lame], [build K3b without LAME support (default=no)]), 
-	[ac_cv_use_lame=$withval], 
-	[ac_cv_use_lame=yes]
-)
-
-have_lame=no
-if test "$ac_cv_use_lame" = "yes"; then
-  KDE_CHECK_HEADERS(lame/lame.h, [
-  	AC_CHECK_LIB(mp3lame, lame_init, [
-  		have_lame=yes
-  		AC_DEFINE(HAVE_LAME,1,[defined if you have the lame header and lib])
-  		], [], $all_libraries -lm)
-  ])
-fi
-
-AM_CONDITIONAL(include_LAME, [test x$have_lame = xyes])
-dnl === test for LAME - end ====
-dnl =======================================================
-dnl FILE: ./src/fastscale/configure.in.in
-dnl =======================================================
-
-#
-# Imlib/Mosfet scaling
-#
-AM_PROG_AS
-
-# MMX test duped from tdelibs/tdefx - it should be probably moved to admin/
-dnl -----------------------------------------------------
-dnl IA32 checks
-dnl -----------------------------------------------------
-
-gv_asm_defs=
-case $host_cpu in
-  i*86 )
-  AC_MSG_CHECKING(for assembler support for IA32 extensions)
- 
-  dnl MMX check
-  AC_TRY_COMPILE(, [ __asm__("pxor %mm0, %mm0") ],
-  [
-    echo $ECHO_N "MMX yes$ECHO_C"
-    AC_DEFINE_UNQUOTED(HAVE_X86_MMX, 1, [Define to 1 if the assembler supports MMX instructions.])
-    gv_asm_defs="$gv_asm_defs -DHAVE_X86_MMX"
-  ], [ echo $ECHO_N "MMX no$ECHO_C" ])
-
-  dnl SSE check
-  AC_TRY_COMPILE(,[ __asm__("xorps %xmm0, %xmm0") ],
-  [
-    echo $ECHO_N ", SSE yes$ECHO_C"
-    AC_DEFINE_UNQUOTED(HAVE_X86_SSE, 1, [Define to 1 if the assembler supports SSE instructions.])
-    gv_asm_defs="$gv_asm_defs -DHAVE_X86_SSE"
-  ], [ echo $ECHO_N ", SSE no$ECHO_C" ])
-
-  dnl SSE2 check
-  AC_TRY_COMPILE(, [ __asm__("xorpd %xmm0, %xmm0") ],
-  [
-    echo $ECHO_N ", SSE2 yes$ECHO_C"
-    AC_DEFINE_UNQUOTED(HAVE_X86_SSE2, 1, [Define to 1 if the assembler supports SSE2 instructions.])
-    gv_asm_defs="$gv_asm_defs -DHAVE_X86_SSE2"
-  ], [ echo $ECHO_N ", SSE2 no$ECHO_C" ])
- 
-  dnl 3DNOW check
-  AC_TRY_COMPILE(, [ __asm__("femms") ],
-  [
-    echo $ECHO_N ", 3DNOW yes$ECHO_C"
-    AC_DEFINE_UNQUOTED(HAVE_X86_3DNOW, 1, [Define to 1 if the assembler supports 3DNOW instructions.])
-    gv_asm_defs="$gv_asm_defs -DHAVE_X86_3DNOW"
-  ], [ echo $ECHO_N ", 3DNOW no$ECHO_C" ])
-  echo
-  ;;
-  powerpc )
-  AC_MSG_CHECKING(for assembler support for AltiVec instructions)
-  dnl AltiVec check
-  AC_TRY_COMPILE(, [ __asm__("mtspr 256, %0\n\t" "vand %%v0, %%v0, %%v0" : : "r"(-1) ) ],
-  [
-    echo $ECHO_N " yes$ECHO_C"
-    AC_DEFINE_UNQUOTED(HAVE_PPC_ALTIVEC, 1, [Define to 1 if the assembler supports AltiVec instructions.])
-    gv_asm_defs="$gv_asm_defs -DHAVE_PPC_ALTIVEC"
-  ], [ echo $ECHO_N ", AltiVec no$ECHO_C" ])
-  echo
-  ;;
-esac
-
-GV_ASM_DEFS="$gv_asm_defs"
-AC_SUBST(GV_ASM_DEFS)
-KDE_CREATE_SUBDIRSLIST
-AC_CONFIG_FILES([ Makefile ])
-AC_CONFIG_FILES([ doc/Makefile ])
-AC_CONFIG_FILES([ k3bsetup/Makefile ])
-AC_CONFIG_FILES([ tdefile-plugins/Makefile ])
-AC_CONFIG_FILES([ tdefile-plugins/k3bproject/Makefile ])
-AC_CONFIG_FILES([ tdeioslaves/Makefile ])
-AC_CONFIG_FILES([ tdeioslaves/videodvd/Makefile ])
-AC_CONFIG_FILES([ libk3b/Makefile ])
-AC_CONFIG_FILES([ libk3b/cddb/Makefile ])
-AC_CONFIG_FILES([ libk3b/core/Makefile ])
-AC_CONFIG_FILES([ libk3b/jobs/Makefile ])
-AC_CONFIG_FILES([ libk3b/plugin/Makefile ])
-AC_CONFIG_FILES([ libk3b/plugin/libsamplerate/Makefile ])
-AC_CONFIG_FILES([ libk3b/projects/Makefile ])
-AC_CONFIG_FILES([ libk3b/projects/audiocd/Makefile ])
-AC_CONFIG_FILES([ libk3b/projects/datacd/Makefile ])
-AC_CONFIG_FILES([ libk3b/projects/datadvd/Makefile ])
-AC_CONFIG_FILES([ libk3b/projects/mixedcd/Makefile ])
-AC_CONFIG_FILES([ libk3b/projects/movixcd/Makefile ])
-AC_CONFIG_FILES([ libk3b/projects/movixdvd/Makefile ])
-AC_CONFIG_FILES([ libk3b/projects/videocd/Makefile ])
-AC_CONFIG_FILES([ libk3b/projects/videocd/cdi/Makefile ])
-AC_CONFIG_FILES([ libk3b/projects/videocd/extra/Makefile ])
-AC_CONFIG_FILES([ libk3b/projects/videocd/mpeginfo/Makefile ])
-AC_CONFIG_FILES([ libk3b/projects/videodvd/Makefile ])
-AC_CONFIG_FILES([ libk3b/scripts/Makefile ])
-AC_CONFIG_FILES([ libk3b/tools/Makefile ])
-AC_CONFIG_FILES([ libk3b/tools/libisofs/Makefile ])
-AC_CONFIG_FILES([ libk3b/videodvd/Makefile ])
-AC_CONFIG_FILES([ libk3bdevice/Makefile ])
-AC_CONFIG_FILES([ plugins/Makefile ])
-AC_CONFIG_FILES([ plugins/audiooutput/Makefile ])
-AC_CONFIG_FILES([ plugins/audiooutput/alsa/Makefile ])
-AC_CONFIG_FILES([ plugins/audiooutput/arts/Makefile ])
-AC_CONFIG_FILES([ plugins/decoder/Makefile ])
-AC_CONFIG_FILES([ plugins/decoder/ffmpeg/Makefile ])
-AC_CONFIG_FILES([ plugins/decoder/flac/Makefile ])
-AC_CONFIG_FILES([ plugins/decoder/libsndfile/Makefile ])
-AC_CONFIG_FILES([ plugins/decoder/mp3/Makefile ])
-AC_CONFIG_FILES([ plugins/decoder/musepack/Makefile ])
-AC_CONFIG_FILES([ plugins/decoder/ogg/Makefile ])
-AC_CONFIG_FILES([ plugins/decoder/wave/Makefile ])
-AC_CONFIG_FILES([ plugins/encoder/Makefile ])
-AC_CONFIG_FILES([ plugins/encoder/external/Makefile ])
-AC_CONFIG_FILES([ plugins/encoder/lame/Makefile ])
-AC_CONFIG_FILES([ plugins/encoder/ogg/Makefile ])
-AC_CONFIG_FILES([ plugins/encoder/sox/Makefile ])
-AC_CONFIG_FILES([ plugins/project/Makefile ])
-AC_CONFIG_FILES([ plugins/project/audiometainforenamer/Makefile ])
-AC_CONFIG_FILES([ plugins/project/audioprojectcddb/Makefile ])
-AC_CONFIG_FILES([ src/Makefile ])
-AC_CONFIG_FILES([ src/fastscale/Makefile ])
-AC_CONFIG_FILES([ src/icons/Makefile ])
-AC_CONFIG_FILES([ src/icons/actions/Makefile ])
-AC_CONFIG_FILES([ src/konqi/Makefile ])
-AC_CONFIG_FILES([ src/mimetypes/Makefile ])
-AC_CONFIG_FILES([ src/misc/Makefile ])
-AC_CONFIG_FILES([ src/option/Makefile ])
-AC_CONFIG_FILES([ src/pics/Makefile ])
-AC_CONFIG_FILES([ src/pics/73lab/Makefile ])
-AC_CONFIG_FILES([ src/pics/RobsTheme/Makefile ])
-AC_CONFIG_FILES([ src/pics/crystal/Makefile ])
-AC_CONFIG_FILES([ src/pics/quant/Makefile ])
-AC_CONFIG_FILES([ src/projects/Makefile ])
-AC_CONFIG_FILES([ src/projects/kostore/Makefile ])
-AC_CONFIG_FILES([ src/rip/Makefile ])
-AC_CONFIG_FILES([ src/rip/videodvd/Makefile ])
-AC_CONFIG_FILES([ src/sounds/Makefile ])
-AC_OUTPUT
-echo ""
-
-echo "K3b - Include libdvdread (Video DVD ripping) support:"
-if test "$have_libdvdread" = "yes"; then
-	echo "K3b -                                        yes"
-else
-	echo "K3b -                                        no"
-	if test "$ac_cv_use_libdvdread" = "yes"; then
-		echo "K3b -     You are missing the libdvdread library."
-	fi
-fi
-echo ""
-
-if test -n "$RESMGR_LIB"; then
-	echo "K3b - Resmgr support:                        yes"
-else
-	echo "K3b - Resmgr support:                         no"
-fi
-
-echo ""
-
-
-if test x$have_hal = xyes; then
-	echo "K3b - Compile HAL support                    yes"
-else
-	echo "K3b - Compile HAL support                     no"
-if test "x$ac_cv_use_hal" = "xyes" ; then
-	echo "K3b -     You are missing the HAL >= 0.5 headers and libraries"
-	echo "K3b -     or the DBus Qt bindings."
-fi
-fi
-echo ""
-
-if test "x$have_alsa" = xyes; then
-	echo "K3b - Audioplayer available (alsa)           yes"
-else
-	echo "K3b - Audioplayer available (alsa)            no"
-fi
-echo ""
-
-echo "K3b - FFMpeg decoder plugin (decodes wma and others):"
-if test  x$have_ffmpeg = xyes; then
-        echo "K3b -                                        yes"
-	if test x$enable_ffmpeg_all_codecs = xyes; then
-		echo "K3b -     WARNING: You enabled all codecs in the ffmpeg decoder plugin."
-		echo "K3b -              Be aware that most are not tested and track lengths"
-		echo "K3b -              will be wrong in many cases."
-	fi
-else
-        echo "K3b -                                         no"
-if test "$ac_cv_use_ffmpeg" = "yes"; then
-	if test "$ffmpeg_compiles" = "yes"; then
-		echo "K3b -     You are missing the ffmpeg libraries."
-		echo "K3b -     Make sure ffmpeg has been configured as a"
-		echo "K3b -     shared library (which is not the default)."
-	else
-		echo "K3b -     You are missing the ffmpeg headers and libraries"
-		echo "K3b -     version 0.4.9 or higher."
-	fi
-	echo "K3b -     The ffmpeg audio decoding plugin (decodes wma and"
-	echo "K3b -     others) won't be compiled."
-fi
-fi
-echo ""
-
-if test x$have_flac = xyes; then
-	echo "K3b - FLAC support:                          yes"
-else
-	echo "K3b - FLAC support:                           no"
-if test "$ac_cv_use_flac" = "yes"; then
-	if test "$have_flac" = "no"; then
-		echo "K3b -     You are missing the FLAC++ headers and libraries."
-		echo "K3b -     The FLAC decoding plugin won't be compiled."
-	fi
-fi
-fi
-echo ""
-
-if $av_cv_sndfile; then
-	echo "K3b - libsndfile audio decoding support:     yes"
-else
-	echo "K3b - libsndfile audio decoding support:      no"
-if test "$ac_cv_use_sndfile" = "yes"; then
-	echo "K3b -     You are missing the libsndfile headers and libraries."
-	echo "K3b -     The libsndfile audio decoding plugin won't be compiled."
-fi
-fi
-echo ""
-
-if test -n "$MAD_LIB"; then
-	echo "K3b - Mp3 decoding support (libmad):         yes"
-else
-	echo "K3b - Mp3 decoding support (libmad):          no"
-if test "$ac_cv_use_libmad" = "yes"; then
-	echo "K3b -     You are missing the libmad headers and libraries."
-	echo "K3b -     The Mp3 decoding plugin won't be compiled."
-fi
-fi
-echo ""
-
-if test x$have_mpc = xyes; then
-	echo "K3b - Musepack support:                      yes"
-else
-	echo "K3b - Musepack support:                       no"
-if test "$ac_cv_use_mpc" = "yes"; then
-	echo "K3b -     You are missing the Musepack headers and libraries >= 1.1."
-	echo "K3b -     The Musepack audio decoding plugin won't be compiled."
-fi
-fi
-
-echo ""
-
-if test x$ogg_vorbis = xyes; then
-	echo "K3b - Ogg Vorbis support:                    yes"
-else
-	echo "K3b - Ogg Vorbis support:                     no"
-if test "$ac_cv_use_oggvorbis" = "yes"; then
-	echo "K3b -     You are missing the Ogg-Vorbis headers and libraries."
-	echo "K3b -     The Ogg Vorbis decoding and encoding plugins won't be compiled."
-fi
-fi
-echo ""
-
-if test x$have_lame = xyes; then
-	echo "K3b - Lame Mp3 encoder plugin:               yes"
-else
-	echo "K3b - Lame Mp3 encoder plugin                 no"
-if test "$ac_cv_use_lame" = "yes"; then
-	echo "K3b -     You are missing the Lame headers and libraries."
-	echo "K3b -     The Lame Mp3 encoding plugin won't be compiled."
-fi
-fi
-echo ""
-
-if test "$use_k3b_debug" = "yes"; then
-	echo 	""
-	echo	"K3b - K3B DEBUGGING ENABLED! THIS ENABLES ADDITIONAL DEBUGGING OUTPUT"
-	echo	"K3b - AND FUNCTIONALITY WHICH IS ONLY INTENDED FOR K3B DEVELOPERS!"
-	echo	"K3b - THIS MAY EVEN SLOW DOWN K3B IN SOME PLACES!"
-	echo 	""
-fi
-
-if test "$cdrecord_suid_root" != "yes"; then
-	echo    ""
-	echo    "K3b - Suid root test for cdrecord, cdrdao, and wodim deactivated"
-	echo    "K3b - This is NOT recommended although it might work out fine ;)"
-	echo    ""
-fi
-
-if $have_taglib; then
-	echo "K3b - Audio meta data reading with Taglib:   yes"
-else
-	echo "K3b - Audio meta data reading with Taglib:    no"
-	echo "K3b -     You are missing the Taglib headers and libraries."
-	echo "K3b -     The mp3 and flac decoder plugins will fall back to"
-	echo "K3b -     using KMetaFileInfo."
-fi
-
-echo ""
-
-echo "K3b - Audio resampling:"
-if test -n "$LIBSAMPLERATE"; then
-	echo "K3b -                    using installed version"
-else
-        echo "K3b -             using version bundled with K3b"
-fi
-
-echo ""
-
-if test x$arts_available = xyes; then
-	echo "K3b - Audioplayer available (aRts)           yes"
-else
-	echo "K3b - Audioplayer available (aRts)            no"
-fi
-
-echo ""
-
-if test x$compile_k3bsetup = xyes; then
-	echo "K3b - Compile K3bSetup 2:                    yes"
-else
-	echo "K3b - Compile K3bSetup 2:                     no"
-fi
-
-echo ""
-
-if $have_mb; then
-	echo "K3b - Tag guessing using MusicBrainz         yes"
-else
-	echo "K3b - Tag guessing using MusicBrainz          no"
-if test "$ac_cv_use_musicbrainz" = "yes"; then
-	echo "K3b -     You are missing the musicbrainz headers and libraries."
-	echo "K3b -     K3b will be compiled without support for tag guessing."
-fi
-fi
-# Check if KDE_SET_PREFIX was called, and --prefix was passed to configure
-if test -n "$kde_libs_prefix" -a -n "$given_prefix"; then
-  # And if so, warn when they don't match
-  if test "$kde_libs_prefix" != "$given_prefix"; then
-    # And if kde doesn't know about the prefix yet
-    echo ":"`tde-config --path exe`":" | grep ":$given_prefix/bin/:" 2>&1 >/dev/null
-    if test $? -ne 0; then
-      echo ""
-      echo "Warning: you chose to install this package in $given_prefix,"
-      echo "but KDE was found in $kde_libs_prefix."
-      echo "For this to work, you will need to tell KDE about the new prefix, by ensuring"
-      echo "that TDEDIRS contains it, e.g. export TDEDIRS=$given_prefix:$kde_libs_prefix"
-      echo "Then restart KDE."
-      echo ""
-    fi
-  fi
-fi
-
-if test x$GXX = "xyes" -a x$kde_have_gcc_visibility = "xyes" -a x$kde_cv_val_qt_gcc_visibility_patched = "xno"; then
-  echo ""
-  echo "Your GCC supports symbol visibility, but the patch for Qt supporting visibility"
-  echo "was not included. Therefore, GCC symbol visibility support remains disabled."
-  echo ""
-  echo "For better performance, consider including the Qt visibility supporting patch"
-  echo "located at:"
-  echo ""
-  echo "http://bugs.kde.org/show_bug.cgi?id=109386"
-  echo ""
-  echo "and recompile all of Qt and KDE. Note, this is entirely optional and"
-  echo "everything will continue to work just fine without it."
-  echo ""
-fi
-
-if test "$all_tests" = "bad"; then
-  if test ! "$cache_file" = "/dev/null"; then
-    echo ""
-    echo "Please remove the file $cache_file after changing your setup"
-    echo "so that configure will find the changes next time."
-    echo ""
-  fi
-else
-  echo ""
-  echo "Good - your configure finished. Start make now"
-  echo ""
-fi