diff options
Diffstat (limited to 'FAQ')
-rw-r--r-- | FAQ | 82 |
1 files changed, 82 insertions, 0 deletions
@@ -0,0 +1,82 @@ +Q: Compiling K3b fails with errors like this: + base_k3badvanceddataimagesettings.cpp:185: invalid use of undefined type + `struct KComboBox' + base_k3badvanceddataimagesettings.h:17: forward declaration of `struct + KComboBox' +A: The QTDesigner tool 'uic' is not able to find the kde widget plugins. + To solve this run 'qtconfig' and add '$KDEDIR/lib/kde3/plugins' to the plugin search path + (replace $KDEDIR with your kde base dir). + + +Q: K3b thinks my SCSI device is IDE. +A: If you are using the rpm from SuSE your version of K3bSetup is not able to set the + permissions that K3b needs the devices to have. The SuSE guys seem to think messing with + permissions is too dangerous. It is recommended to always compile from source to have all + K3b features. + + +Q: Where has all the fancy graphic gone? +A: Most likely you installed K3b in the wrong directory. All KDE programs are installed in the + KDE dirtree (SuSE: /opt/kde3, RedHat: /usr). If you compile K3b from source it defaults + to either $KDEDIR or /usr/local. To install in the correct directory you need to specify the prefix + to configure like this: + ./configure --prefix=`kde-config --prefix` + That will install K3b relative to the correct path. + + +Q: The linking always breaks with the missing -laudio. +A: You need to install NAS. + + +Q: Where can I find K3bSetup2? +A: K3bSetup2 is a KControlCenter Module. You can find it in the System Administration section or start + it manually with "kdesu kcmshell k3bsetup2". + There also is a script since K3b 0.11 called k3bsetup. + + +Q: My writer supports writing at speed X but K3b shows Y as a max. +A: K3b determined the maximum writing speed the first time you start it. Since the speed reported by the + writer always depends on the mounted medium this may not be the real max. + To manually change it open the K3b settings in the device section and click on the value. You will + be presented with a spinbox which allows to change the speed. + + +Q: Writing fails with the following cdrecord message: + "Cannot allocate memory. Cannot get SCSI I/O buffer." +A: Since kernel 2.6.9 suid root programs are not allowed to use the SCSI subsystem. + To solve this issue either configure cdrecord to run without root privileges: chmod 755 /usr/bin/cdrecord + or run K3b as root (which is not recommended but works also). + + +Q: Writing fails with the following cdrecord message over and over again: + "Error trying to open /dev/hdc exclusively (Device or resource busy)..." +A: You are using a patched cdrecord version which tries to open the device exclusively which fails because + your are probably also using automounting. The solutions are to disable automounting altogether (and this is + the recommended solution as automounting can cause other more serious problems with CD/DVD writing) or to + install a non-patched cdrecord version. + +Q: My DVD drive supports 16X but K3B keeps burning at 1X! What's happening? + +A: Your kernel most likely didn't apply optimal settings for your drive when it detected it. You can find out + what are the current settings of your drive with the command "hdparm -v /dev/dvd": + + /dev/dvd: + IO_support = 0 (default 16-bit) + unmaskirq = 0 (off) + using_dma = 0 (off) + keepsettings = 0 (off) + readonly = 0 (off) + readahead = 256 (on) + + The following options are known to maximize burning and playback performance: + + hdparm -d1 -c1 -a8 -u1 /dev/dvd + + To make these options permanent, a quick and dirty solution is to include the command in /etc/rc.local. + Consult your distribution documentation for a tailored solution. + + Some drives have buggy DMA support. If you experience instability, leave these options disabled. + + Some useful references: + http://www.togaware.com/linux/survivor/CD_DVD_Drives.shtml + http://www.linuxjournal.com/article/6921 |