Removed unnecessary files

Signed-off-by: Michele Calgaro <michele.calgaro@yahoo.it>

1 files changed, 0 insertions, 152 deletions

diff --git a/configure.in b/configure.in
deleted file mode 100644
index 35c912e..0000000
--- a/configure.in
+++ /dev/null
@@ -1,152 +0,0 @@
-dnl =======================================================
-dnl FILE: ./admin/configure.in.min
-dnl =======================================================
-
-dnl    This file is part of the KDE libraries/packages
-dnl    Copyright (C) 2001 Stephan Kulow (coolo@kde.org)
- 
-dnl    This file is free software; you can redistribute it and/or
-dnl    modify it under the terms of the GNU Library General Public
-dnl    License as published by the Free Software Foundation; either
-dnl    version 2 of the License, or (at your option) any later version.
- 
-dnl    This library is distributed in the hope that it will be useful,
-dnl    but WITHOUT ANY WARRANTY; without even the implied warranty of
-dnl    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-dnl    Library General Public License for more details.
- 
-dnl    You should have received a copy of the GNU Library General Public License
-dnl    along with this library; see the file COPYING.LIB.  If not, write to
-dnl    the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
-dnl    Boston, MA 02110-1301, USA.
-
-# Original Author was Kalle@kde.org
-# I lifted it in some mater. (Stephan Kulow)
-# I used much code from Janos Farkas
-
-dnl Process this file with autoconf to produce a configure script.
-
-AC_INIT(acinclude.m4) dnl a source file from your sub dir
-
-dnl This is so we can use kde-common
-AC_CONFIG_AUX_DIR(admin)
-
-dnl This ksh/zsh feature conflicts with `cd blah ; pwd`
-unset CDPATH
-
-dnl Checking host/target/build systems, for make, install etc.
-AC_CANONICAL_SYSTEM 
-dnl Perform program name transformation
-AC_ARG_PROGRAM
-
-dnl Automake doc recommends to do this only here. (Janos)
-AM_INIT_AUTOMAKE(kmyfirewall-1.1.1, "3.5.6") dnl searches for some needed programs
-
-KDE_SET_PREFIX
-
-dnl generate the config header
-AM_CONFIG_HEADER(config.h) dnl at the distribution this done
-
-dnl Checks for programs.
-AC_CHECK_COMPILERS
-AC_ENABLE_SHARED(yes)
-AC_ENABLE_STATIC(no)
-KDE_PROG_LIBTOOL
-
-dnl for NLS support. Call them in this order!
-dnl WITH_NLS is for the po files
-AM_KDE_WITH_NLS
-
-KDE_USE_TQT(3.2)
-AC_PATH_KDE
-dnl =======================================================
-dnl FILE: configure.in.in
-dnl =======================================================
-
-#MIN_CONFIG(3.2)
-
-#dnl CXXFLAGS="$NOOPT_CXXFLAGS" dnl __tdevelop[noopt]__
-#dnl CFLAGS="$NOOPT_CFLAGS" dnl __tdevelop[noopt]__
-#dnl CXXFLAGS="$CXXFLAGS $USE_EXCEPTIONS" dnl __tdevelop[exc]__
-
-#dnl KDE_NEED_FLEX dnl __tdevelop__
-#dnl AC_PROG_YACC dnl __tdevelop__
-
-KDE_CREATE_SUBDIRSLIST
-AC_CONFIG_FILES([ Makefile ])
-AC_CONFIG_FILES([ KMFIPTInterface/Makefile ])
-AC_CONFIG_FILES([ KMFSysTray/Makefile ])
-AC_CONFIG_FILES([ doc/Makefile ])
-AC_CONFIG_FILES([ doc/kmyfirewall/Makefile ])
-AC_CONFIG_FILES([ kmyfirewall/Makefile ])
-AC_CONFIG_FILES([ kmyfirewall/compilers/Makefile ])
-AC_CONFIG_FILES([ kmyfirewall/compilers/iptables/Makefile ])
-AC_CONFIG_FILES([ kmyfirewall/compilers/pf/Makefile ])
-AC_CONFIG_FILES([ kmyfirewall/core/Makefile ])
-AC_CONFIG_FILES([ kmyfirewall/genericinterface/Makefile ])
-AC_CONFIG_FILES([ kmyfirewall/installer/Makefile ])
-AC_CONFIG_FILES([ kmyfirewall/installer/linux/Makefile ])
-AC_CONFIG_FILES([ kmyfirewall/installer/openbsd/Makefile ])
-AC_CONFIG_FILES([ kmyfirewall/ipteditor/Makefile ])
-AC_CONFIG_FILES([ kmyfirewall/kmfwidgets/Makefile ])
-AC_CONFIG_FILES([ kmyfirewall/ruleoptionplugins/Makefile ])
-AC_CONFIG_FILES([ kmyfirewall/ruleoptionplugins/custom_option/Makefile ])
-AC_CONFIG_FILES([ kmyfirewall/ruleoptionplugins/interface_option/Makefile ])
-AC_CONFIG_FILES([ kmyfirewall/ruleoptionplugins/ip_option/Makefile ])
-AC_CONFIG_FILES([ kmyfirewall/ruleoptionplugins/limit_option/Makefile ])
-AC_CONFIG_FILES([ kmyfirewall/ruleoptionplugins/log_target_option/Makefile ])
-AC_CONFIG_FILES([ kmyfirewall/ruleoptionplugins/mac_option/Makefile ])
-AC_CONFIG_FILES([ kmyfirewall/ruleoptionplugins/mark_target_option/Makefile ])
-AC_CONFIG_FILES([ kmyfirewall/ruleoptionplugins/nat_target_option/Makefile ])
-AC_CONFIG_FILES([ kmyfirewall/ruleoptionplugins/protocol_option/Makefile ])
-AC_CONFIG_FILES([ kmyfirewall/ruleoptionplugins/state_option/Makefile ])
-AC_CONFIG_FILES([ kmyfirewall/ruleoptionplugins/tos_option/Makefile ])
-AC_CONFIG_FILES([ kmyfirewall/ruleoptionplugins/tos_target_option/Makefile ])
-AC_CONFIG_FILES([ pics/Makefile ])
-AC_CONFIG_FILES([ templates/Makefile ])
-AC_OUTPUT
-# Check if KDE_SET_PREFIX was called, and --prefix was passed to configure
-if test -n "$kde_libs_prefix" -a -n "$given_prefix"; then
-  # And if so, warn when they don't match
-  if test "$kde_libs_prefix" != "$given_prefix"; then
-    # And if kde doesn't know about the prefix yet
-    echo ":"`tde-config --path exe`":" | grep ":$given_prefix/bin/:" 2>&1 >/dev/null
-    if test $? -ne 0; then
-      echo ""
-      echo "Warning: you chose to install this package in $given_prefix,"
-      echo "but KDE was found in $kde_libs_prefix."
-      echo "For this to work, you will need to tell KDE about the new prefix, by ensuring"
-      echo "that TDEDIRS contains it, e.g. export TDEDIRS=$given_prefix:$kde_libs_prefix"
-      echo "Then restart KDE."
-      echo ""
-    fi
-  fi
-fi
-
-if test x$GXX = "xyes" -a x$kde_have_gcc_visibility = "xyes" -a x$kde_cv_val_qt_gcc_visibility_patched = "xno"; then
-  echo ""
-  echo "Your GCC supports symbol visibility, but the patch for Qt supporting visibility"
-  echo "was not included. Therefore, GCC symbol visibility support remains disabled."
-  echo ""
-  echo "For better performance, consider including the Qt visibility supporting patch"
-  echo "located at:"
-  echo ""
-  echo "http://bugs.kde.org/show_bug.cgi?id=109386"
-  echo ""
-  echo "and recompile all of Qt and KDE. Note, this is entirely optional and"
-  echo "everything will continue to work just fine without it."
-  echo ""
-fi
-
-if test "$all_tests" = "bad"; then
-  if test ! "$cache_file" = "/dev/null"; then
-    echo ""
-    echo "Please remove the file $cache_file after changing your setup"
-    echo "so that configure will find the changes next time."
-    echo ""
-  fi
-else
-  echo ""
-  echo "Good - your configure finished. Start make now"
-  echo ""
-fi