Move translations from tde-i18n/tdepim.

Signed-off-by: Slávek Banko <slavek.banko@axis.cz>

1 files changed, 6974 insertions, 0 deletions

diff --git a/po/bs.po b/po/bs.po
new file mode 100644
index 0000000..37a716a
--- /dev/null
+++ b/po/bs.po
@@ -0,0 +1,6974 @@
+# Prevedeno koristenjem S->B prevodioca www.linux.org.ba
+# translation of kpilot.po to Srpski
+# translation of kpilot.po to Serbian
+# kpilot.po in Serbian
+# Copyright (C) 1999,2003 Free Software Foundation, Inc.
+# TDE Serbian Translation Team <kde-yu@kde.org.yu>, 1999.
+# Chusslove Illich <chaslav@sezampro.yu>, 2003.
+# Toplica Tanaskovic  <toptan@kde.org.yu>, 2003.
+# Tanaskovic Toplica <toptan@kde.org.yu>, 2003.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: kpilot\n"
+"POT-Creation-Date: 2008-07-08 01:23+0200\n"
+"PO-Revision-Date: 2003-10-15 02:06+0200\n"
+"Last-Translator: Tanaskovic Toplica <toptan@kde.org.yu>\n"
+"Language-Team: Srpski <kde-yu@kde.org.yu>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: KBabel 1.2\n"
+
+#: lib/pilotTodoEntry.cc:133
+msgid "Completed"
+msgstr "Završeno"
+
+#: lib/pilotTodoEntry.cc:135
+msgid "Not completed"
+msgstr "Nije završeno"
+
+#: lib/pilotTodoEntry.cc:143
+#, c-format
+msgid "Due date: %1"
+msgstr "Datum krajnjeg roka: %1"
+
+#: lib/pilotTodoEntry.cc:151
+#, c-format
+msgid "Priority: %1"
+msgstr "Prioritet: %1"
+
+#: lib/pilotDateEntry.cc:277 lib/pilotTodoEntry.cc:158
+msgid "<b><em>Note:</em></b><br>"
+msgstr "<b><em>Napomena:</em></b><br>"
+
+#: lib/pilotDateEntry.cc:277 lib/pilotTodoEntry.cc:158
+msgid ""
+"Note:\n"
+msgstr ""
+"Napomena:\n"
+
+#: lib/pilotMemo.cc:81
+msgid ""
+"<i>Title:</i> %1"
+"<br>\n"
+"<i>MemoText:</i>"
+"<br>%2"
+msgstr ""
+"<i>Naslov:</i> %1"
+"<br>\n"
+"<i>Beleška:</i>"
+"<br>%2"
+
+#: lib/pilotMemo.cc:86
+msgid ""
+"Title: %1\n"
+"MemoText:\n"
+"%2"
+msgstr ""
+"Naslov: %1\n"
+"Beleška:\n"
+"%2"
+
+#: kpilot/addressWidget.cc:393 lib/pilotMemo.cc:132
+msgid "[unknown]"
+msgstr "[nepoznato]"
+
+#: lib/actionQueue.cc:136
+msgid ""
+"The connection to the handheld was lost. Synchronization cannot continue."
+msgstr ""
+
+#: lib/actions.cc:54
+msgid ""
+"KPilot %1 HotSync starting...\n"
+msgstr ""
+"KPilot %1 vruća-sinhronizacija započinje...\n"
+
+#: lib/actions.cc:56
+#, fuzzy
+msgid "Using encoding %1 on the handheld."
+msgstr "Koristi se skup znakova %1 na ručnom računaru."
+
+#: lib/actions.cc:67
+msgid "KPilot is busy and cannot process the HotSync right now."
+msgstr "KPilot je zauzet i trenutno ne može da obradi vruću sinhronizaciju."
+
+#: lib/actions.cc:114
+msgid ""
+"Testing.\n"
+msgstr ""
+"Proba.\n"
+
+#: lib/actions.cc:130
+msgid "Syncing database %1..."
+msgstr "Sinhronizujem bazu podataka %1..."
+
+#: kpilot/logFile.cc:97 lib/actions.cc:134
+msgid "HotSync finished."
+msgstr "Vruća sinhronizacija je završena."
+
+#: lib/syncAction.cc:103
+msgid "The conduit %1 could not be executed."
+msgstr "Provod %1 nije mogao da se izvrši."
+
+#: kpilot/conduitConfigDialog.cc:398 kpilot/kpilot.cc:261 kpilot/kpilot.cc:263
+#: kpilot/kpilot.cc:515 kpilot/kpilotConfigDialog.cc:242 lib/syncAction.cc:204
+msgid "HotSync"
+msgstr "Vruća sinhronizacija"
+
+#: lib/syncAction.cc:205
+#, fuzzy
+msgid "Full Synchronization"
+msgstr "Režim sinhronizacije"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_sync.ui line 54
+#: kpilot/kpilot.cc:566 lib/syncAction.cc:206 rc.cpp:1016
+#, no-c-format
+msgid "Copy PC to Handheld"
+msgstr "Kopiraj PC na ručni računar"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_sync.ui line 59
+#: kpilot/kpilot.cc:557 lib/syncAction.cc:207 rc.cpp:1019
+#, no-c-format
+msgid "Copy Handheld to PC"
+msgstr "Kopiraj ručni računar na PC"
+
+#: kpilot/conduitConfigDialog.cc:397 kpilot/kpilotConfigDialog.cc:328
+#: lib/syncAction.cc:208
+#, fuzzy
+msgid "Backup"
+msgstr "&Napravi rezervnu kopiju"
+
+#: lib/syncAction.cc:209
+#, fuzzy
+msgid "Restore From Backup"
+msgstr "Povrati Pilot-a iz rezervne kopije"
+
+#: lib/syncAction.cc:220
+#, fuzzy
+msgid "Test Sync"
+msgstr "&Brzo sinhronizuj"
+
+#: lib/syncAction.cc:224
+#, fuzzy
+msgid "Local Sync"
+msgstr "Bez sinhronizacije"
+
+#: lib/syncAction.cc:316 lib/syncAction.cc:428
+msgid "Question"
+msgstr "Pitanje"
+
+#: lib/syncAction.cc:335 lib/syncAction.cc:448
+#, fuzzy
+msgid "&Do not ask again"
+msgstr "Ne pitaj opet"
+
+#: lib/syncAction.cc:369 lib/syncAction.cc:481
+#, fuzzy
+msgid "Do not ask again"
+msgstr "Ne pitaj opet"
+
+#: lib/recordConduit.cc:69 lib/recordConduit.cc:289
+#, fuzzy
+msgid "Unable to open the %1 database on the handheld."
+msgstr "Ne mogu da otvorim baze podataka adresara na ručnom računaru."
+
+#: lib/recordConduit.cc:295
+#, fuzzy, c-format
+msgid "Unable to open %1."
+msgstr "Ne mogu da otvorim %1"
+
+#: lib/kpilotdevicelink.cc:148
+msgid "Could not open device: %1 (will retry)"
+msgstr "Nisam mogao da otvorim uređaj: %1 (pokušaću ponovo)"
+
+#: lib/kpilotdevicelink.cc:187
+msgid "Trying to open device %1..."
+msgstr "Pokušavam da otvorim uređaj %1..."
+
+#: lib/kpilotdevicelink.cc:241
+msgid "Already listening on that device"
+msgstr ""
+
+#: lib/kpilotdevicelink.cc:261
+#, fuzzy
+msgid "Cannot create socket for communicating with the Pilot (%1)"
+msgstr "Ne mogu da napravim soket za komunikaciju sa Pilot-om"
+
+#: lib/kpilotdevicelink.cc:289
+msgid "Cannot open Pilot port \"%1\". "
+msgstr "Ne mogu da otvorim Pilot-ov port '%1'. "
+
+#: lib/kpilotdevicelink.cc:391
+#, fuzzy
+msgid "Cannot listen on Pilot socket (%1)"
+msgstr "Ne mogu da slušam na Pilot-ovom soketu (%1)"
+
+#: lib/kpilotdevicelink.cc:411 lib/kpilotdevicelink.cc:426
+#, fuzzy
+msgid "Cannot accept Pilot (%1)"
+msgstr "Ne mogu da prihvatim Pilot-a (%1)"
+
+#: lib/kpilotdevicelink.cc:427
+msgid "already connected"
+msgstr ""
+
+#: lib/kpilotdevicelink.cc:441
+msgid "Unable to read system information from Pilot"
+msgstr "Ne mogu da pročitam sistemske informacije iz Pilot-a"
+
+#: lib/kpilotdevicelink.cc:478
+msgid "Checking last PC..."
+msgstr "Proveravam posljednji PC..."
+
+#: lib/kpilotdevicelink.cc:487
+msgid ""
+"Could not read user information from the Pilot. Perhaps you have a password set "
+"on the device?"
+msgstr ""
+"Nisam mogao da pročitam korisničke informacije iz Pilot-a. Možda je uređaj "
+"zaštićen šifrom?"
+
+#: lib/kpilotdevicelink.cc:670
+msgid "The Pilot device is not configured yet."
+msgstr "Pilot-ski uređaj još uvijek nije podešen."
+
+#: lib/kpilotdevicelink.cc:709
+msgid "Pilot device %1 is not read-write."
+msgstr "Pilot-ski uređaj %1 nije u režimu za čitanje i pisanje."
+
+#: lib/kpilotdevicelink.cc:719
+msgid ""
+"Pilot device %1 does not exist. Probably it is a USB device and will appear "
+"during a HotSync."
+msgstr ""
+
+#: lib/kpilotdevicelink.cc:765 lib/kpilotdevicelink.cc:774
+#, fuzzy
+msgid "<qt>Cannot install the file &quot;%1&quot;.</qt>"
+msgstr "<qt>Ne mogu da instaliram datoteka '%1'.</qt>"
+
+#: lib/kpilotdevicelink.cc:846
+msgid ""
+"End of HotSync\n"
+msgstr ""
+"Kraj vruće sinhronizacije\n"
+
+#: lib/pilotDateEntry.cc:179
+#, c-format
+msgid "Start date: %1"
+msgstr "Datum početka: %1"
+
+#: lib/pilotDateEntry.cc:185
+msgid "Whole-day event"
+msgstr "Celodnevni događaj:"
+
+#: lib/pilotDateEntry.cc:193
+#, c-format
+msgid "End date: %1"
+msgstr "Datum kraja: %1"
+
+#: lib/pilotDateEntry.cc:200
+msgid ""
+"_: %1 is the duration, %2 is the time unit\n"
+"Alarm: %1 %2 before event starts"
+msgstr "Alarm: %1 %2 pre početka događaja"
+
+#: lib/pilotDateEntry.cc:204
+msgid "minutes"
+msgstr "minuta"
+
+#: lib/pilotDateEntry.cc:205
+msgid "hours"
+msgstr "časova"
+
+#: lib/pilotDateEntry.cc:206
+msgid "days"
+msgstr "dana"
+
+#: lib/pilotDateEntry.cc:216
+msgid "Recurrence: every %1 %2"
+msgstr "Ponavljanje: svakih %1 %2"
+
+#: lib/pilotDateEntry.cc:222
+msgid "day(s)"
+msgstr "dana"
+
+#: lib/pilotDateEntry.cc:223
+msgid "week(s)"
+msgstr "sedmica"
+
+#: lib/pilotDateEntry.cc:225
+msgid "month(s)"
+msgstr "meseci"
+
+#: lib/pilotDateEntry.cc:226
+msgid "year(s)"
+msgstr "godina"
+
+#: lib/pilotDateEntry.cc:235
+msgid "Repeats indefinitely"
+msgstr "Ponavljaj beskonačno"
+
+#: lib/pilotDateEntry.cc:240
+#, c-format
+msgid "Until %1"
+msgstr "Do %1"
+
+#: lib/pilotDateEntry.cc:244
+msgid "Repeating on the i-th day of week j"
+msgstr "Ponavlja se i-tog dana sedmice j"
+
+#: lib/pilotDateEntry.cc:245
+msgid "Repeating on the n-th day of the month"
+msgstr "Ponavlja se n-tog dana u mesecu"
+
+#: lib/pilotDateEntry.cc:263
+msgid "Exceptions:"
+msgstr "Izuzeci:"
+
+#: lib/plugin.cc:73
+msgid "Unnamed"
+msgstr "Neimenovano"
+
+#: lib/plugin.cc:93
+msgid ""
+"<qt>The <i>%1</i> conduit's settings have been changed. Do you want to save the "
+"changes before continuing?</qt>"
+msgstr ""
+"<qt>Postavke provoda <i>%1</i> su izmenjene. Želite li da snimite izmjene pre "
+"nego što se nastavi dalje?</qt>"
+
+#: lib/plugin.cc:105
+msgid "%1 Conduit"
+msgstr "Provod %1"
+
+#: lib/plugin.cc:144
+#, fuzzy
+msgid "Send questions and comments to tdepim-users@kde.org"
+msgstr "Pošaljite pitanja i komentare na kde-pim@kde.org"
+
+#: lib/plugin.cc:194
+msgid "Send questions and comments to <a href=\"mailto:%1\">%2</a>."
+msgstr "Pošaljite pitanja i komentare na <a href=\"mailto:%1\">%2</a>."
+
+#: lib/plugin.cc:198
+msgid "Send bug reports to <a href=\"mailto:%1\">%2</a>."
+msgstr "Pošaljite izvještaje o greškama na <a href=\"mailto:%1\">%2</a>."
+
+#: lib/plugin.cc:202
+msgid ""
+"For trademark information, see the <a href=\"help:/kpilot/trademarks.html\">"
+"KPilot User's Guide</a>."
+msgstr ""
+"Za informacije o registrovanoj robnoj marki, pogledajte <a "
+"href=\"help:/kpilot/trademarks.html\">KPilot-ov korisnički vodič</a>."
+
+#: lib/plugin.cc:213
+msgid "<b>Authors:</b> "
+msgstr "<b>Autori:</b> "
+
+#: lib/plugin.cc:234
+msgid "<b>Credits:</b> "
+msgstr "<b>Zasluge:</b> "
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:1527
+#: conduits/vcalconduit/vcal-conduitbase.cc:438 lib/plugin.cc:308
+msgid "Handheld"
+msgstr "Ručni računar"
+
+#: conduits/vcalconduit/vcal-conduitbase.cc:438 lib/plugin.cc:309
+msgid "PC"
+msgstr ""
+
+#: lib/plugin.cc:480
+msgid "Large Changes Detected"
+msgstr ""
+
+#: lib/plugin.cc:482
+msgid ""
+"The %1 conduit has made a large number of changes to your %2.  Do you want to "
+"allow this change?\n"
+"Details:\n"
+"\t%3"
+msgstr ""
+
+#: lib/plugin.cc:536
+#, fuzzy, c-format
+msgid "Could not find conduit %1."
+msgstr "Nisam mogao da pronađem provod %1."
+
+#: lib/plugin.cc:559
+#, fuzzy, c-format
+msgid "Could not load conduit %1."
+msgstr "Nisam mogao da učitam provod %1."
+
+#: lib/plugin.cc:571
+msgid "Conduit %1 has wrong version (%2)."
+msgstr ""
+
+#: lib/plugin.cc:581
+#, fuzzy, c-format
+msgid "Could not initialize conduit %1."
+msgstr "Nisam mogao da pronađem provod %1."
+
+#: lib/plugin.cc:594 lib/plugin.cc:603
+#, fuzzy, c-format
+msgid "Could not create conduit %1."
+msgstr "Nisam mogao da napravim provod %1."
+
+#: lib/plugin.cc:607
+msgid "[Conduit %1]"
+msgstr "[Provod %1]"
+
+#: lib/plugin.cc:749
+msgid "Start: %1. End: %2. "
+msgstr ""
+
+#: lib/plugin.cc:751
+msgid "%1 new. "
+msgstr ""
+
+#: lib/plugin.cc:752
+#, fuzzy
+msgid "%1 changed. "
+msgstr "promenjeno"
+
+#: lib/plugin.cc:753
+#, fuzzy
+msgid "%1 deleted. "
+msgstr "obrisano"
+
+#: lib/plugin.cc:755
+#, fuzzy
+msgid "No changes made. "
+msgstr "nepromenjeno"
+
+#: _translatorinfo.cpp:1
+msgid ""
+"_: NAME OF TRANSLATORS\n"
+"Your names"
+msgstr ""
+
+#: _translatorinfo.cpp:3
+msgid ""
+"_: EMAIL OF TRANSLATORS\n"
+"Your emails"
+msgstr ""
+
+#: conduits/null/null-conduit.cc:63 conduits/null/null-factory.cc:63
+msgid "Null"
+msgstr "Nulti"
+
+#: conduits/null/null-factory.cc:65
+msgid "Null Conduit for KPilot"
+msgstr "Nulti provod za KPilot-a"
+
+#: conduits/null/null-factory.cc:67
+msgid "Configures the Null Conduit for KPilot"
+msgstr "Podešava se nulti provod za KPilot-a"
+
+#: Documentation/ConduitProgrammingTutorial/mal-factory.cc:56
+#: conduits/abbrowserconduit/abbrowser-setup.cc:54
+#: conduits/knotes/knotes-factory.cc:73 conduits/malconduit/mal-factory.cc:76
+#: conduits/memofileconduit/memofile-factory.cc:69
+#: conduits/notepadconduit/notepad-factory.cc:73
+#: conduits/null/null-factory.cc:71 conduits/recordconduit/factory.cc:72
+#: conduits/sysinfoconduit/sysinfo-setup.cc:101
+#: conduits/timeconduit/time-setup.cc:54
+msgid "Primary Author"
+msgstr "Glavni autor"
+
+#: conduits/null/null-conduit.cc:81
+msgid "NULL conduit is programmed to fail."
+msgstr "Nulti provod je programiran da ne uspe."
+
+#: conduits/memofileconduit/memofile-conduit.cc:70
+#: conduits/memofileconduit/memofile-factory.cc:61
+#, fuzzy
+msgid "Memofile"
+msgstr "Prikazivač beleški"
+
+#: conduits/memofileconduit/memofile-conduit.cc:101
+#, fuzzy
+msgid "Unable to open the memo databases on the handheld."
+msgstr "Ne mogu da otvorim baze podataka adresara na ručnom računaru."
+
+#: conduits/memofileconduit/memofile-conduit.cc:109
+msgid "Cannot initialize from pilot."
+msgstr ""
+
+#: conduits/memofileconduit/memofile-conduit.cc:116
+msgid "Cannot initialize the memo files from disk."
+msgstr ""
+
+#: conduits/memofileconduit/memofile-conduit.cc:123
+#, fuzzy, c-format
+msgid " Syncing with %1."
+msgstr "Sinhronizujem sa datotekom '%1'"
+
+#: conduits/memofileconduit/memofile-conduit.cc:126
+#, fuzzy
+msgid " Copying Pilot to PC..."
+msgstr "Proveravam posljednji PC..."
+
+#: conduits/memofileconduit/memofile-conduit.cc:131
+#, fuzzy
+msgid " Copying PC to Pilot..."
+msgstr "&Podesi izabrani..."
+
+#: conduits/memofileconduit/memofile-conduit.cc:135
+msgid " Doing regular sync..."
+msgstr ""
+
+#: conduits/memofileconduit/memofile-factory.cc:63
+#, fuzzy
+msgid "Memofile Conduit for KPilot"
+msgstr "Provod KPilot-a za poštu"
+
+#: conduits/memofileconduit/memofile-factory.cc:65
+#, fuzzy
+msgid "Configures the Memofile Conduit for KPilot"
+msgstr "Podešava se provod KPilot-a za poštu"
+
+#: conduits/sysinfoconduit/sysinfo-setup.cc:52
+#, fuzzy
+msgid "HardwareInfo"
+msgstr "Informacije o hardveru"
+
+#: conduits/sysinfoconduit/sysinfo-setup.cc:53
+#, fuzzy
+msgid "UserInfo"
+msgstr "Korisnik je nepoznat"
+
+#: conduits/sysinfoconduit/sysinfo-setup.cc:54
+#, fuzzy
+msgid "MemoryInfo"
+msgstr "Informacije o memoriji"
+
+#: conduits/sysinfoconduit/sysinfo-setup.cc:55
+msgid "StorageInfo"
+msgstr ""
+
+#: conduits/sysinfoconduit/sysinfo-setup.cc:56
+#, fuzzy
+msgid "DatabaseList"
+msgstr "Baze podataka"
+
+#: conduits/sysinfoconduit/sysinfo-setup.cc:57
+msgid "RecordNumbers"
+msgstr ""
+
+#: conduits/sysinfoconduit/sysinfo-setup.cc:58
+#, fuzzy
+msgid "SyncInfo"
+msgstr "Sinhronizuj"
+
+#: conduits/sysinfoconduit/sysinfo-setup.cc:59
+msgid "TDEVersion"
+msgstr ""
+
+#: conduits/sysinfoconduit/sysinfo-setup.cc:60
+#, fuzzy
+msgid "PalmOSVersion"
+msgstr "Verzija PalmOS-a"
+
+#: conduits/sysinfoconduit/sysinfo-setup.cc:61
+#, fuzzy
+msgid "DebugInformation"
+msgstr "Informacije o sistemu"
+
+#: conduits/sysinfoconduit/sysinfo-setup.cc:95
+msgid "KPilot System Information conduit"
+msgstr "Provod KPilot-a za sistemske informacije"
+
+#: conduits/sysinfoconduit/sysinfo-setup.cc:97
+msgid ""
+"Retrieves System, Hardware, and User Info from the Handheld and stores them to "
+"a file."
+msgstr ""
+"Dobavlja informacije o sistemu, hardveru i korisniku iz ručnog računara i snima "
+"ih u datoteka."
+
+#: conduits/sysinfoconduit/sysinfo-conduit.cc:163
+#: conduits/sysinfoconduit/sysinfo-setup.cc:112
+msgid "System Information"
+msgstr "Informacije o sistemu"
+
+#: conduits/docconduit/doc-conflictdialog.cc:161
+#: conduits/sysinfoconduit/sysinfo-conduit.cc:207
+#: conduits/sysinfoconduit/sysinfo-conduit.cc:404
+#: conduits/sysinfoconduit/sysinfo-conduit.cc:405
+#: conduits/sysinfoconduit/sysinfo-conduit.cc:406
+#: conduits/sysinfoconduit/sysinfo-conduit.cc:407
+msgid "unknown"
+msgstr "nepoznato"
+
+#: conduits/sysinfoconduit/sysinfo-conduit.cc:254
+msgid "Password set"
+msgstr "Lozinka je postavljena"
+
+#: conduits/sysinfoconduit/sysinfo-conduit.cc:258
+msgid "No password set"
+msgstr "Lozinka nije postavljena"
+
+#: conduits/sysinfoconduit/sysinfo-conduit.cc:308
+msgid "No Cards available via pilot-link"
+msgstr "Nema dostupnih kartica preko pilot-ske veze"
+
+#: conduits/sysinfoconduit/sysinfo-conduit.cc:463
+msgid "No debug data"
+msgstr "Nema podataka za otklanjanje grešaka"
+
+#: conduits/sysinfoconduit/sysinfo-conduit.cc:587
+msgid "Unable to open output file, using %1 instead."
+msgstr "Ne mogu da otvorim izlazni datoteka, koristim %1 umjesto njega."
+
+#: conduits/notepadconduit/notepad-conduit.cc:79
+#: conduits/sysinfoconduit/sysinfo-conduit.cc:591
+#, c-format
+msgid "Unable to open %1"
+msgstr "Ne mogu da otvorim %1"
+
+#: conduits/sysinfoconduit/sysinfo-conduit.cc:602
+#, c-format
+msgid "Handheld system information written to the file %1"
+msgstr "Informacije o sistemu ručnog računara zapisane su u datoteka %1"
+
+#: conduits/malconduit/mal-conduit.cc:121 conduits/malconduit/mal-setup.cc:62
+msgid "MAL"
+msgstr "MAL"
+
+#: conduits/malconduit/mal-conduit.cc:193
+msgid ""
+"Skipping MAL sync, because last synchronization was not long enough ago."
+msgstr ""
+"Preskačem MAL sinhroniciju, zato što posljednja sinhronicija nije bila dovoljno "
+"davno."
+
+#: conduits/malconduit/mal-conduit.cc:202
+msgid "MAL synchronization failed (no SyncInfo)."
+msgstr "MAL sinhronicija nije uspela (nema SyncInfo-a)."
+
+#: conduits/malconduit/mal-conduit.cc:217
+msgid "No proxy server is set."
+msgstr ""
+
+#: conduits/malconduit/mal-conduit.cc:220
+#, c-format
+msgid "Using proxy server: %1"
+msgstr ""
+
+#: conduits/malconduit/mal-conduit.cc:259
+#, fuzzy
+msgid "No SOCKS proxy is set."
+msgstr "SOCKS p&roksi"
+
+#: conduits/malconduit/mal-conduit.cc:262
+#, fuzzy, c-format
+msgid "Using SOCKS proxy: %1"
+msgstr "SOCKS p&roksi"
+
+#: Documentation/ConduitProgrammingTutorial/mal-factory.cc:50
+#: conduits/malconduit/mal-factory.cc:70
+msgid "MAL Synchronization Conduit for KPilot"
+msgstr "MAL sinhronicioni provod za KPilot-a"
+
+#: Documentation/ConduitProgrammingTutorial/mal-factory.cc:52
+#: conduits/malconduit/mal-factory.cc:72
+msgid "Synchronizes the content from MAL Servers like AvantGo to the Handheld"
+msgstr ""
+"Sinhronizuje sadržaj sa MAL servera, kao što je AvantGo, sa ručnim računarom"
+
+#: Documentation/ConduitProgrammingTutorial/mal-factory.cc:58
+#: conduits/malconduit/mal-factory.cc:78
+msgid "Author of libmal and the JPilot AvantGo conduit"
+msgstr "Autor libmal-a i JPilot-ovog provoda za AvantGo"
+
+#: Documentation/ConduitProgrammingTutorial/mal-factory.cc:60
+#: conduits/malconduit/mal-factory.cc:80
+msgid "Author of syncmal"
+msgstr "Autor syncmal-a"
+
+#: Documentation/ConduitProgrammingTutorial/mal-factory.cc:62
+#: conduits/malconduit/mal-factory.cc:82
+msgid "Authors of the malsync library (c) 1997-1999"
+msgstr "Autori biblioteke malsync (c) 1997-1999"
+
+#: conduits/knotes/knotes-factory.cc:67
+msgid "KNotes Conduit for KPilot"
+msgstr "Provod KPilot-a za KNotes"
+
+#: conduits/knotes/knotes-factory.cc:69
+msgid "Configures the KNotes Conduit for KPilot"
+msgstr "Konfiguriše se provod KPilot-a za KNotes"
+
+#: conduits/abbrowserconduit/abbrowser-setup.cc:61
+#: conduits/knotes/knotes-factory.cc:77
+msgid "UI"
+msgstr "UI"
+
+#: conduits/knotes/knotes-action.cc:232
+#, fuzzy
+msgid "Could not open MemoDB on the handheld."
+msgstr "Ne mogu da otvorim baze podataka adresara na ručnom računaru."
+
+#: conduits/knotes/knotes-action.cc:272
+#, fuzzy, c-format
+msgid "Could not load the resource at: %1"
+msgstr "Nisam mogao da učitam provod %1."
+
+#: conduits/knotes/knotes-action.cc:808
+#, fuzzy, c-format
+msgid ""
+"_n: Added one new memo.\n"
+"Added %n new memos."
+msgstr ""
+"Dodata %n nova beleška.\n"
+"Dodate %n nove beleške.\n"
+"Dodato %n novih beležaka."
+
+#: conduits/knotes/knotes-action.cc:814
+#, fuzzy, c-format
+msgid ""
+"_n: Modified one memo.\n"
+"Modified %n memos."
+msgstr ""
+"Izmenjena %n beleška.\n"
+"Izmenjene %n beleške.\n"
+"Izmenjeno %n beleški."
+
+#: conduits/knotes/knotes-action.cc:821
+#, fuzzy, c-format
+msgid ""
+"_n: Deleted one memo.\n"
+"Deleted %n memos."
+msgstr ""
+"Dodata %n beleška u KNotes.\n"
+"Dodate %n beleške u KNotes.\n"
+"Dodato %n beležaka u KNotes."
+
+#: conduits/knotes/knotes-action.cc:827
+#, fuzzy, c-format
+msgid ""
+"_n: Added one note to KNotes.\n"
+"Added %n notes to KNotes."
+msgstr ""
+"Dodata %n beleška u KNotes.\n"
+"Dodate %n beleške u KNotes.\n"
+"Dodato %n beležaka u KNotes."
+
+#: conduits/knotes/knotes-action.cc:833
+#, fuzzy, c-format
+msgid ""
+"_n: Modified one note in KNotes.\n"
+"Modified %n notes in KNotes."
+msgstr ""
+"Izmenjena %n beleška.\n"
+"Izmenjene %n beleške.\n"
+"Izmenjeno %n beleški."
+
+#: conduits/knotes/knotes-action.cc:839
+#, fuzzy, c-format
+msgid ""
+"_n: Deleted one note from KNotes.\n"
+"Deleted %n notes from KNotes."
+msgstr ""
+"Dodata %n beleška u KNotes.\n"
+"Dodate %n beleške u KNotes.\n"
+"Dodato %n beležaka u KNotes."
+
+#: conduits/knotes/knotes-action.cc:844
+msgid "No change to KNotes."
+msgstr ""
+
+#: conduits/knotes/knotes-setup.cc:59
+msgid "KNotes"
+msgstr "KNotes"
+
+#: conduits/timeconduit/time-conduit.cc:57
+#: conduits/timeconduit/time-setup.cc:68 kpilot/datebookWidget.cc:68
+msgid "Time"
+msgstr "Vrijeme"
+
+#: conduits/timeconduit/time-conduit.cc:91
+msgid "Setting the clock on the handheld"
+msgstr "Postavljam časovnik ručnog računara"
+
+#: conduits/timeconduit/time-conduit.cc:108
+msgid ""
+"PalmOS 3.25 and 3.3 do not support setting the system time. Skipping the time "
+"conduit..."
+msgstr ""
+"PalmOS 3.25 i 3.3 ne podržavaju postavljanje sistemskog vremena. Preskačem "
+"vremenski provod..."
+
+#: conduits/timeconduit/time-setup.cc:48
+msgid "Time Synchronization Conduit for KPilot"
+msgstr "Provod KPilot-a za sinhronizaciju vremena"
+
+#: conduits/timeconduit/time-setup.cc:50
+msgid "Synchronizes the Time on the Handheld and the PC"
+msgstr "Sinhronizuje se vrijeme između ručnog računara i PC-ja"
+
+#: conduits/abbrowserconduit/abbrowser-setup.cc:48
+msgid "Abbrowser Conduit for KPilot"
+msgstr "Provod KPilot-a za Abbrowser"
+
+#: conduits/abbrowserconduit/abbrowser-setup.cc:50
+msgid "Configures the Abbrowser Conduit for KPilot"
+msgstr "Podešava se provod KPilot-a za Abbrowser"
+
+#: conduits/abbrowserconduit/abbrowser-setup.cc:56
+#: conduits/abbrowserconduit/abbrowser-setup.cc:59
+#: conduits/docconduit/doc-factory.cc:68 conduits/popmail/setupDialog.cc:74
+#: conduits/vcalconduit/todo-setup.cc:59 conduits/vcalconduit/todo-setup.cc:63
+#: conduits/vcalconduit/vcal-setup.cc:50 conduits/vcalconduit/vcal-setup.cc:54
+#: kpilot/kpilot.cc:1027 kpilot/pilotDaemon.cc:1323
+msgid "Maintainer"
+msgstr "Održavalac"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:125
+#: conduits/abbrowserconduit/abbrowser-setup.cc:71
+msgid "Addressbook"
+msgstr "Adresar"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:291
+#: conduits/vcalconduit/vcal-conduitbase.cc:298
+#, fuzzy
+msgid ""
+"You chose to sync with the file \"%1\", which cannot be opened. Please make "
+"sure to supply a valid file name in the conduit's configuration dialog. "
+"Aborting the conduit."
+msgstr ""
+"Izabrali ste sinhronizaciju sa datotekom '%1', koji ne može da se otvori ili "
+"napravi. Provjerite da li ste naveli ispravno ime datoteke u dijalogu za "
+"podešavanje provoda. Obustavljam provod."
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:327
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:328
+msgid "Unable to initialize and load the addressbook for the sync."
+msgstr "Ne mogu da inicijalizujem i učitam adresar za sinhronizaciju."
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:340
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:341
+#, fuzzy
+msgid "Unable to lock addressbook for writing.  Can't sync!"
+msgstr "Ne mogu da inicijalizujem i učitam adresar za sinhronizaciju."
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:396
+msgid ""
+"An error occurred while uploading \"%1\". You can try to upload the temporary "
+"local file \"%2\" manually"
+msgstr ""
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:518
+msgid "Unable to open the addressbook databases on the handheld."
+msgstr "Ne mogu da otvorim baze podataka adresara na ručnom računaru."
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:539
+msgid "Unable to open the addressbook."
+msgstr "Ne mogu da otvorim adresar."
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:1526
+msgid "Item on PC"
+msgstr "Stavka na PC-ju"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:1528
+msgid "Last sync"
+msgstr "Posljednja sinhronizacija"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:1549
+msgid "Last name"
+msgstr "Prezime"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:1550
+msgid "First name"
+msgstr "Ime"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:1551
+msgid "Organization"
+msgstr "Organizacija"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:1552
+msgid "Title"
+msgstr "Naslov"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:1553
+msgid "Note"
+msgstr "Napomena"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:1555
+msgid "Custom 1"
+msgstr "Posebno 1"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:1556
+msgid "Custom 2"
+msgstr "Posebno 2"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:1557
+msgid "Custom 3"
+msgstr "Posebno 3"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:1558
+msgid "Custom 4"
+msgstr "Posebno 4"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:1560
+msgid "Work Phone"
+msgstr "Telefon na poslu"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:1561
+msgid "Home Phone"
+msgstr "Kućni telefon"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:1562
+msgid "Mobile Phone"
+msgstr "Mobilni telefon"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:1563
+msgid "Fax"
+msgstr "Faks"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:1564
+msgid "Pager"
+msgstr "Pejdžer"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:1565
+msgid "Other"
+msgstr "Ostalo"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:1566
+msgid "Email"
+msgstr "E-adresa"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:1569
+msgid "Address"
+msgstr "Adresa"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:1570
+msgid "City"
+msgstr "Grad"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:1571
+msgid "Region"
+msgstr "Regija"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:1572
+msgid "Postal code"
+msgstr "Poštanski broj"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:1573
+msgid "Country"
+msgstr "Država"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:1587 kpilot/listCat.cc:84
+msgid "Category"
+msgstr "Kategorija"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:1752
+msgid ""
+"The following address entry was changed, but does no longer exist on the "
+"handheld. Please resolve this conflict:"
+msgstr ""
+"Sljedeća adresa je promenjena, ali više ne postoji na ručnom računaru. "
+"Razrešite ovaj konflikt:"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:1756
+msgid ""
+"The following address entry was changed, but does no longer exist on the PC. "
+"Please resolve this conflict:"
+msgstr ""
+"Sljedeća adresa je promenjena, ali više ne postoji na PC-ju. Razrešite ovaj "
+"konflikt:"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:1760
+msgid ""
+"The following address entry was changed on the handheld as well as on the PC "
+"side. The changes could not be merged automatically, so please resolve the "
+"conflict yourself:"
+msgstr ""
+"Sljedeća adresa je promenjena i na ručnom računaru i na PC-ju. Izmjene nisu "
+"mogle automatski da se stope, moraćete ručno da razrešite konflikt:"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cc:1762
+msgid "Address conflict"
+msgstr "Konflikt adresa"
+
+#: conduits/abbrowserconduit/resolutionDialog.cc:162
+msgid ""
+"_: Entries in the resolution dialog. First the name of the field, then the "
+"entry from the Handheld or PC after the colon\n"
+"%1: %2"
+msgstr "%1: %2"
+
+#: conduits/abbrowserconduit/resolutionDialog.cc:164
+msgid ""
+"_: Denoting newlines in Address entries. No need to translate\n"
+" | "
+msgstr " | "
+
+#: conduits/abbrowserconduit/resolutionDialog.cc:214
+#: conduits/abbrowserconduit/resolutionDialog.cc:220
+#, fuzzy
+msgid "Delete entry"
+msgstr "Obriši slog"
+
+#: conduits/docconduit/DOC-converter.cc:198
+msgid "Unable to open text file %1 for reading."
+msgstr "Ne mogu da otvorim za čitanje tekstualni datoteka %1."
+
+#: conduits/docconduit/DOC-converter.cc:383
+msgid "Unable to open Database for writing"
+msgstr "Ne mogu da otvorim za pisanje bazu podataka"
+
+#: conduits/docconduit/DOC-converter.cc:440
+#, c-format
+msgid "Unable to open palm doc database %1"
+msgstr "Ne mogu da otvorim palm doc bazu podataka %1"
+
+#: conduits/docconduit/DOC-converter.cc:510
+msgid "No filename set for the conversion"
+msgstr "Nije postavljeno ime datoteke za konverziju"
+
+#: conduits/docconduit/DOC-converter.cc:515
+msgid "Unable to open Database for reading"
+msgstr "Ne mogu da otvorim za čitanje bazu podataka"
+
+#: conduits/docconduit/DOC-converter.cc:523
+#, c-format
+msgid "Unable to read database header for database %1."
+msgstr "Ne mogu da pročitam zaglavlje baze podataka %1."
+
+#: conduits/docconduit/DOC-converter.cc:543
+#, c-format
+msgid "Unable to open output file %1."
+msgstr "Ne mogu da otvorim izlazni datoteka %1."
+
+#: conduits/docconduit/DOC-converter.cc:558
+msgid "Could not read text record #%1 from Database %2"
+msgstr "Nisam mogao da pročitam tekstualni slog #%1 iz baze podataka %2"
+
+#: conduits/docconduit/DOC-converter.cc:577
+msgid "Could not read bookmark record #%1 from Database %2"
+msgstr "Nisam mogao da pročitam markerski slog #%1 iz baze podataka %2"
+
+#: conduits/docconduit/DOC-converter.cc:594
+msgid "Unable to open file %1 for the bookmarks of %2."
+msgstr "Ne mogu da otvorim datoteka %1 za markere od %2."
+
+#: conduits/docconduit/doc-conduit.cc:84
+msgid "DOC"
+msgstr "DOC"
+
+#: conduits/docconduit/doc-conduit.cc:272
+msgid "Searching for texts and databases to synchronize"
+msgstr "Tražim tekstove i baze podataka za sinhronizaciju"
+
+#: conduits/docconduit/doc-conduit.cc:332
+#, fuzzy
+msgid "Database created."
+msgstr "Nema izabrane baze podataka"
+
+#: conduits/docconduit/doc-conduit.cc:380
+msgid "Unable to install the locally created PalmDOC %1 to the handheld."
+msgstr "Ne mogu da instaliram lokalno napravljen PalmDOC %1 na ručni računar."
+
+#: conduits/docconduit/doc-conduit.cc:383
+msgid "Conversion of PalmDOC \"%1\" failed."
+msgstr "Konverzija PalmDOC-a '%1' nije uspela."
+
+#: conduits/docconduit/doc-conduit.cc:391
+#, fuzzy, c-format
+msgid "Unable to open or create the database %1."
+msgstr "Ne mogu da otvorim ili napravim bazu podataka %1"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 147
+#: conduits/docconduit/doc-conduit.cc:625 rc.cpp:334 rc.cpp:706
+#, no-c-format
+msgid "Conflict Resolution"
+msgstr "Razrešenje konflikta"
+
+#: conduits/docconduit/doc-conduit.cc:630
+msgid "Sync aborted by user."
+msgstr "Sinhronozacija prekinuta od strane korisnika."
+
+#: conduits/docconduit/doc-conduit.cc:668
+msgid "Synchronizing text \"%1\""
+msgstr "Sinhronizujem tekst '%1'"
+
+#: conduits/docconduit/kpalmdoc_dlg.cc:176
+#: conduits/docconduit/kpalmdoc_dlg.cc:212
+#: conduits/docconduit/kpalmdoc_dlg.cc:325
+#: conduits/docconduit/kpalmdoc_dlg.cc:350
+msgid ""
+"<qt>You selected to sync folders, but gave a filename instead (<em>%1</em>)."
+"<br>Use folder <em>%2</em> instead?</qt>"
+msgstr ""
+"<qt>Izabrali ste sinhronizaciju direktorija, ali ste zadali ime datoteke <em>"
+"%1</em>."
+"<br>Da umjesto toga koristim direktorij <em>%2</em>?</qt>"
+
+#: conduits/docconduit/kpalmdoc_dlg.cc:179
+#: conduits/docconduit/kpalmdoc_dlg.cc:215
+#: conduits/docconduit/kpalmdoc_dlg.cc:328
+#: conduits/docconduit/kpalmdoc_dlg.cc:354
+#, fuzzy
+msgid "Use Folder"
+msgstr "&Tekstualni direktorij:"
+
+#: conduits/docconduit/kpalmdoc_dlg.cc:192
+msgid ""
+"<qt>The folder <em>%1</em> for the handheld database files is not a valid "
+"folder.</qt>"
+msgstr ""
+"<qt>Direktorijum <em>%1</em> za datoteke baza podataka ručnog računara, nije "
+"ispravan.</qt>"
+
+#: conduits/docconduit/kpalmdoc_dlg.cc:201
+msgid ""
+"<qt>The folder <em>%1</em> for the handheld database files is not a valid "
+"directory.</qt>"
+msgstr ""
+"<qt>Direktorijum <em>%1</em> za datoteke baza podataka ručnog računara, nije "
+"ispravan.</qt>"
+
+#: conduits/docconduit/kpalmdoc_dlg.cc:229
+msgid ""
+"<qt>The folder <em>%1</em> for the text files could not be created.</qt>"
+msgstr ""
+"<qt>Direktorijum <em>%1</em> za tekstualne datoteke nije mogao da se "
+"napravi.</qt>"
+
+#: conduits/docconduit/kpalmdoc_dlg.cc:252
+#: conduits/docconduit/kpalmdoc_dlg.cc:390
+msgid "The following texts were successfully converted:"
+msgstr "Sljedeći tekstovi su uspješno konvertovani:"
+
+#: conduits/docconduit/kpalmdoc_dlg.cc:253
+#: conduits/docconduit/kpalmdoc_dlg.cc:391
+msgid "Conversion Successful"
+msgstr "Konverzija je uspela"
+
+#: conduits/docconduit/kpalmdoc_dlg.cc:257
+#: conduits/docconduit/kpalmdoc_dlg.cc:395
+msgid "No text files were converted correctly"
+msgstr "Nema ispravno konvertovanih tekstualnih fajlova"
+
+#: conduits/docconduit/kpalmdoc_dlg.cc:267
+#: conduits/docconduit/kpalmdoc_dlg.cc:405
+msgid "<qt>The file <em>%1</em> does not exist.</qt>"
+msgstr "<qt>Fajl <em>%1</em> ne postoji.</qt>"
+
+#: conduits/docconduit/kpalmdoc_dlg.cc:283
+#: conduits/docconduit/kpalmdoc_dlg.cc:413
+msgid "Conversion of file %1 successful."
+msgstr "Konverzija datoteke %1 je upela."
+
+#: conduits/docconduit/kpalmdoc_dlg.cc:340
+msgid ""
+"<qt>The folder <em>%1</em> for the text files is not a valid folder.</qt>"
+msgstr ""
+"<qt>Direktorijum <em>%1</em> za tekstualne datoteke nije ispravan.</qt>"
+
+#: conduits/docconduit/kpalmdoc_dlg.cc:367
+msgid ""
+"<qt>The folder <em>%1</em> for the PalmDOC files could not be created.</qt>"
+msgstr ""
+"<qt>Direktorijum <em>%1</em> za PalmDOC datoteke nije mogao da se napravi.</qt>"
+
+#: conduits/docconduit/kpalmdoc_dlg.cc:435
+msgid "&Text folder:"
+msgstr "&Tekstualni direktorij:"
+
+#: conduits/docconduit/kpalmdoc_dlg.cc:436
+msgid "&PalmDOC folder:"
+msgstr "PalmDOC &direktorij:"
+
+#. i18n: file ./conduits/docconduit/kpalmdoc_dlgbase.ui line 66
+#: conduits/docconduit/kpalmdoc_dlg.cc:440 rc.cpp:751
+#, no-c-format
+msgid "&Text file:"
+msgstr "&Tekstualni datoteka:"
+
+#: conduits/docconduit/kpalmdoc_dlg.cc:441
+msgid "&DOC file:"
+msgstr "DOC &datoteka:"
+
+#: conduits/docconduit/kpalmdoc_dlg.cc:456
+#, fuzzy
+msgid "<qt>The database file <em>%1</em> already exists. Overwrite it?</qt>"
+msgstr ""
+"<qt>Fajl baze podataka <em>%1</em> već postoji. Da li da ga prebrišem?</qt>"
+
+#: conduits/docconduit/kpalmdoc_dlg.cc:457
+#: conduits/docconduit/kpalmdoc_dlg.cc:502 kpilot/addressWidget.cc:698
+#: kpilot/logWidget.cc:356
+#, fuzzy
+msgid "Overwrite"
+msgstr "&Prebriši"
+
+#: conduits/docconduit/kpalmdoc_dlg.cc:482
+#: conduits/docconduit/kpalmdoc_dlg.cc:518
+msgid "<qt>Error while converting the text %1.</qt>"
+msgstr "<qt>Greška pri konvertovanju teksta %1.</qt>"
+
+#: conduits/docconduit/kpalmdoc_dlg.cc:501
+#, fuzzy
+msgid "<qt>The text file <em>%1</em> already exists. Overwrite it?</qt>"
+msgstr ""
+"<qt>Tekstualni datoteka <em>%1</em> već postoji. Da li da ga prebrišem?</qt>"
+
+#: conduits/docconduit/doc-factory.cc:63
+msgid "Palm DOC Conduit for KPilot"
+msgstr "Provod KPilot-a za PalmDOC"
+
+#: conduits/docconduit/doc-factory.cc:64
+msgid "Configures the DOC Conduit for KPilot"
+msgstr "Podešava se provod KPilot-a za PalmDOC"
+
+#: conduits/docconduit/doc-setup.cc:64
+msgid "Palm DOC"
+msgstr "PalmDOC"
+
+#: conduits/docconduit/kpalmdoc.cpp:42
+msgid "KPalmDOC"
+msgstr "KPalmDOC"
+
+#: conduits/docconduit/kpalmdoc.cpp:45
+msgid "Main Developer"
+msgstr "Glavni programer"
+
+#: conduits/docconduit/kpalmdoc.cpp:47
+msgid "Maintainer of KPilot"
+msgstr "Održavalac KPilot-a"
+
+#: conduits/docconduit/kpalmdoc.cpp:54
+#, fuzzy
+msgid "PalmDOC Converter"
+msgstr "PalmDOC konvertor"
+
+#: conduits/docconduit/doc-conflictdialog.cc:53
+msgid ""
+"Here is a list of all text files and DOC databases the conduit found. The "
+"conduit tried to determine the correct sync direction, but for databases in "
+"bold red letters a conflict occurred (i.e. the text was changed both on the "
+"desktop and on the handheld). For these databases please specify which version "
+"is the current one."
+msgstr ""
+"Ovdje je lista svih tekstualnih fajlova i DOC baza podataka koje je provod "
+"pronašao. Provod je pokušao da odredi ispravan pravac sinhronizacije, ali došlo "
+"je do konflikta kod baza podataka ispisanih crvenim slovima (tj. tekst je "
+"izmenjen i na ručnom i na stonom računaru). Navedite kod ovih baza koja je "
+"verzija tekuća."
+
+#: conduits/docconduit/doc-conflictdialog.cc:57
+msgid ""
+"You can also change the sync direction for databases without a conflict."
+msgstr ""
+"Takođe možete promijeniti pravac sinhronizacije za baze podataka koje nemaju "
+"konflikt."
+
+#: conduits/docconduit/doc-conflictdialog.cc:61
+msgid "DOC Databases"
+msgstr "DOC baze podataka"
+
+#: conduits/docconduit/doc-conflictdialog.cc:106
+msgid "No Sync"
+msgstr "Bez sinhronizacije"
+
+#: conduits/docconduit/doc-conflictdialog.cc:107
+msgid "Sync Handheld to PC"
+msgstr "Sinhronizuj ručni računar prema PC-ju"
+
+#: conduits/docconduit/doc-conflictdialog.cc:108
+msgid "Sync PC to Handheld"
+msgstr "Sinhronizuj PC prema ručnom računaru"
+
+#: conduits/docconduit/doc-conflictdialog.cc:109
+msgid "Delete Both Databases"
+msgstr "Obriši obje baze podataka"
+
+#: conduits/docconduit/doc-conflictdialog.cc:113
+#, fuzzy
+msgid "More Info..."
+msgstr "Još informacija..."
+
+#: conduits/docconduit/doc-conflictdialog.cc:155
+msgid "unchanged"
+msgstr "nepromenjeno"
+
+#: conduits/docconduit/doc-conflictdialog.cc:156
+msgid "new"
+msgstr "novo"
+
+#: conduits/docconduit/doc-conflictdialog.cc:157
+msgid "changed"
+msgstr "promenjeno"
+
+#: conduits/docconduit/doc-conflictdialog.cc:158
+msgid "only bookmarks changed"
+msgstr "samo su markeri promenjeni"
+
+#: conduits/docconduit/doc-conflictdialog.cc:159
+msgid "deleted"
+msgstr "obrisano"
+
+#: conduits/docconduit/doc-conflictdialog.cc:160
+msgid "does not exist"
+msgstr "ne postoji"
+
+#: conduits/docconduit/doc-conflictdialog.cc:171
+msgid ""
+"Status of the database %1:\n"
+"\n"
+msgstr ""
+"Status baze podataka %1:\n"
+"\n"
+
+#: conduits/docconduit/doc-conflictdialog.cc:172
+msgid ""
+"Handheld: %1\n"
+msgstr ""
+"Ručni računar: %1\n"
+
+#: conduits/docconduit/doc-conflictdialog.cc:173
+msgid ""
+"Desktop: %1\n"
+msgstr ""
+"Stoni računar: %1\n"
+
+#: conduits/docconduit/doc-conflictdialog.cc:175
+msgid "Database information"
+msgstr "Informacije o bazi podataka"
+
+#: conduits/notepadconduit/notepad-conduit.cc:59
+#: conduits/notepadconduit/notepad-factory.cc:89
+#, fuzzy
+msgid "Notepad"
+msgstr "Napomena"
+
+#: conduits/notepadconduit/notepad-conduit.cc:105
+#, c-format
+msgid ""
+"_n: 1 notepad could not be saved\n"
+"%n notepads could not be saved"
+msgstr ""
+
+#: conduits/notepadconduit/notepad-conduit.cc:106
+#, c-format
+msgid ""
+"_n: 1 notepad saved\n"
+"%n notepads saved"
+msgstr ""
+
+#: conduits/notepadconduit/notepad-factory.cc:67
+msgid "Saves notepads to png files"
+msgstr ""
+
+#: conduits/notepadconduit/notepad-factory.cc:69
+#, fuzzy
+msgid "Configures the Notepad Conduit for KPilot"
+msgstr "Konfiguriše se provod KPilot-a za KNotes"
+
+#: conduits/notepadconduit/notepad-factory.cc:78
+msgid "Notepad conduit is based on Angus' read-notepad, part of pilot-link"
+msgstr ""
+
+#: conduits/recordconduit/factory.cc:64
+#, fuzzy
+msgid "Record Conduit"
+msgstr "Provod KPilot-a za VCal"
+
+#: conduits/recordconduit/factory.cc:66
+#, fuzzy
+msgid "Record Conduit for KPilot"
+msgstr "Provod KPilot-a za VCal"
+
+#: conduits/recordconduit/factory.cc:68
+#, fuzzy
+msgid "Configures the Record Conduit for KPilot"
+msgstr "Podešava se provod KPilot-a za VCal"
+
+#: conduits/popmail/popmail-conduit.cc:89 conduits/popmail/setupDialog.cc:66
+#, fuzzy
+msgid "KMail"
+msgstr "Koristi KMail"
+
+#: conduits/popmail/setupDialog.cc:68
+msgid "Mail Conduit for KPilot"
+msgstr "Provod KPilot-a za poštu"
+
+#: conduits/popmail/setupDialog.cc:70
+msgid "Configures the Mail Conduit for KPilot"
+msgstr "Podešava se provod KPilot-a za poštu"
+
+#: conduits/popmail/setupDialog.cc:78 conduits/vcalconduit/todo-setup.cc:53
+#: conduits/vcalconduit/todo-setup.cc:55 conduits/vcalconduit/todo-setup.cc:57
+#: conduits/vcalconduit/vcal-setup.cc:58 conduits/vcalconduit/vcal-setup.cc:60
+#: conduits/vcalconduit/vcal-setup.cc:62
+msgid "Original Author"
+msgstr "Prvobitni autor"
+
+#: conduits/popmail/setupDialog.cc:80
+msgid "POP3 code"
+msgstr "POP3 kôd"
+
+#: conduits/popmail/setupDialog.cc:82
+msgid "SMTP support and redesign"
+msgstr "SMTP podrška i redizajniranje"
+
+#: conduits/popmail/popmail-conduit.cc:118
+#, c-format
+msgid ""
+"_n: Sent one message\n"
+"Sent %n messages"
+msgstr ""
+"Poslata %n poruka\n"
+"Poslate %n poruke\n"
+"Poslato %n poruka"
+
+#: conduits/popmail/popmail-conduit.cc:138
+msgid "No mail was sent."
+msgstr ""
+
+#: conduits/popmail/popmail-conduit.cc:145
+msgid "No mail could be sent."
+msgstr ""
+
+#: conduits/popmail/popmail-conduit.cc:195
+#, fuzzy
+msgid "Could not connect to DCOP server for the KMail connection."
+msgstr "Nisam mogao da se povežem na DCOP server za KMail-ovu vezu."
+
+#: conduits/popmail/popmail-conduit.cc:197
+#: conduits/popmail/popmail-conduit.cc:232
+#: conduits/popmail/popmail-conduit.cc:245
+#: conduits/popmail/popmail-conduit.cc:273
+msgid "Error Sending Mail"
+msgstr "Greška pri slanju pošte"
+
+#: conduits/popmail/popmail-conduit.cc:230
+#: conduits/popmail/popmail-conduit.cc:243
+msgid "Cannot open temporary file to store mail from Pilot in."
+msgstr ""
+"Ne mogu da otvorim privremeni datoteka u koji bi se skladištila pošta iz "
+"Pilot-a."
+
+#: conduits/popmail/popmail-conduit.cc:272
+msgid "DCOP connection with KMail failed."
+msgstr "DCOP link sa KMail-om nije uspela."
+
+#: conduits/popmail/popmail-conduit.cc:397
+#, fuzzy
+msgid "Cannot perform backup of mail database"
+msgstr "Ne mogu da otvorim bazu podataka"
+
+#: conduits/popmail/popmail-conduit.cc:405
+msgid "Unable to open mail database on handheld"
+msgstr "Ne mogu da otvorim datoteka baze podataka na ručnom računaru"
+
+#: conduits/vcalconduit/vcal-conduit.cc:178
+#: conduits/vcalconduit/vcal-setup.cc:70
+msgid "Calendar"
+msgstr "Kalendar"
+
+#: conduits/vcalconduit/vcal-conduit.cc:222
+msgid ""
+"Event \"%1\" has a yearly recurrence other than by month, will change this to "
+"recurrence by month on handheld."
+msgstr ""
+"Događaj '%1' ima godišnje ponavljanje, ali ne po mesecu. Ovo će biti promenjeno "
+"na ponavljanje po mesecu na ručnom računaru."
+
+#: conduits/vcalconduit/vcal-setup.cc:44
+msgid "VCal Conduit for KPilot"
+msgstr "Provod KPilot-a za VCal"
+
+#: conduits/vcalconduit/vcal-setup.cc:46
+msgid "Configures the VCal Conduit for KPilot"
+msgstr "Podešava se provod KPilot-a za VCal"
+
+#: conduits/vcalconduit/vcal-setup.cc:64
+msgid "iCalendar port"
+msgstr "Port iCalendar-a"
+
+#: conduits/vcalconduit/vcal-setup.cc:66 kpilot/kpilot.cc:1038
+#: kpilot/kpilot.cc:1039
+msgid "Bugfixer"
+msgstr "Ispravljač grešaka"
+
+#: conduits/vcalconduit/vcal-setup.cc:69
+msgid "Calendar Destination"
+msgstr "Odredište kalendara"
+
+#: conduits/vcalconduit/cleanupstate.cc:62
+msgid "Cleaning up ..."
+msgstr ""
+
+#: conduits/vcalconduit/cleanupstate.cc:91
+msgid ""
+"An error occurred while uploading \"%1\". You can try to upload the temporary "
+"local file \"%2\" manually."
+msgstr ""
+
+#: conduits/vcalconduit/todo-conduit.cc:183
+#: conduits/vcalconduit/todo-setup.cc:45
+msgid "To-do"
+msgstr "Zadatak"
+
+#: conduits/vcalconduit/pctohhstate.cc:71
+msgid "Copying records to Pilot ..."
+msgstr ""
+
+#: conduits/vcalconduit/initstate.cc:59
+msgid "Initializing conduit ..."
+msgstr ""
+
+#: conduits/vcalconduit/todo-setup.cc:47
+#, fuzzy
+msgid "To-do Conduit for KPilot"
+msgstr "Provod KPilot-a za zadatke"
+
+#: conduits/vcalconduit/todo-setup.cc:49
+#, fuzzy
+msgid "Configures the To-do Conduit for KPilot"
+msgstr "Podešava se provod KPilot-a za zadatke"
+
+#: conduits/vcalconduit/todo-setup.cc:69
+#, fuzzy
+msgid "To-do Destination"
+msgstr "Odredište zadatka"
+
+#: conduits/vcalconduit/vcal-conduitbase.cc:183
+#, fuzzy
+msgid "Could not open the calendar databases."
+msgstr "Nisam mogao da otvorim kalendarske baze podataka."
+
+#: conduits/vcalconduit/vcal-conduitbase.cc:269
+#, fuzzy
+msgid ""
+"You selected to sync with an iCalendar file, but did not give a filename. "
+"Please select a valid file name in the conduit's configuration dialog"
+msgstr ""
+"Izabrali ste sinhronizaciju sa iCalendar-skim datotekom, ali niste naveli ime "
+"datoteke. Izaberite ispravno ime datoteke u dijalogu za podešavanje provoda."
+
+#: conduits/vcalconduit/vcal-conduitbase.cc:291
+#: conduits/vcalconduit/vcal-conduitbase.cc:356
+#, c-format
+msgid "Using local time zone: %1"
+msgstr ""
+
+#: conduits/vcalconduit/vcal-conduitbase.cc:292
+#: conduits/vcalconduit/vcal-conduitbase.cc:357
+#, c-format
+msgid "Using non-local time zone: %1"
+msgstr ""
+
+#: conduits/vcalconduit/vcal-conduitbase.cc:321
+msgid ""
+"You chose to sync with the file \"%1\", which cannot be opened or created. "
+"Please make sure to supply a valid file name in the conduit's configuration "
+"dialog. Aborting the conduit."
+msgstr ""
+"Izabrali ste sinhronizaciju sa datotekom '%1', koji ne može da se otvori ili "
+"napravi. Provjerite da li ste naveli ispravno ime datoteke u dijalogu za "
+"podešavanje provoda. Obustavljam provod."
+
+#: conduits/vcalconduit/vcal-conduitbase.cc:330
+msgid "Syncing with file \"%1\""
+msgstr "Sinhronizujem sa datotekom '%1'"
+
+#: conduits/vcalconduit/vcal-conduitbase.cc:354
+msgid "Syncing with standard calendar resource."
+msgstr ""
+
+#: conduits/vcalconduit/vcal-conduitbase.cc:367
+msgid ""
+"Unable to initialize the calendar object. Please check the conduit's setup"
+msgstr ""
+"Ne mogu da inicijalizujem kalendarski objekat. Provjerite podešavanja provoda."
+
+#: conduits/vcalconduit/vcal-conduitbase.cc:425
+#, fuzzy
+msgid ""
+"The following item was modified both on the Handheld and on your PC:\n"
+"PC entry:\n"
+"\t"
+msgstr ""
+"Sljedeća stavka je promenjena i na Pilot-u i na PC-ju:\n"
+"Stavka PC-ja:\n"
+"\t"
+
+#: conduits/vcalconduit/vcal-conduitbase.cc:428
+#, fuzzy
+msgid ""
+"\n"
+"Handheld entry:\n"
+"\t"
+msgstr "Faks na ručnom računaru:"
+
+#: conduits/vcalconduit/vcal-conduitbase.cc:430
+msgid ""
+"\n"
+"\n"
+"Which entry do you want to keep? It will overwrite the other entry."
+msgstr ""
+
+#: conduits/vcalconduit/vcal-conduitbase.cc:435
+msgid "Conflicting Entries"
+msgstr "Stavke u konfliktu"
+
+#: kpilot/conduitConfigDialog.cc:252
+msgid "<qt>This conduit appears to be broken and cannot be configured.</qt>"
+msgstr "<qt>Ovaj provod deluje pokvareno i ne može da se podesi.</qt>"
+
+#: kpilot/conduitConfigDialog.cc:260
+msgid "<qt>This is an old-style conduit.</qt>"
+msgstr ""
+
+#: kpilot/conduitConfigDialog.cc:264
+msgid "Configure..."
+msgstr "Podesi..."
+
+#: kpilot/conduitConfigDialog.cc:274
+msgid ""
+"<qt><i>Conduits</i> are external (possibly third-party) programs that perform "
+"synchronization actions. They may have individual configurations. Select a "
+"conduit to configure it, and enable it by clicking on its checkbox. </qt>"
+msgstr ""
+
+#: kpilot/conduitConfigDialog.cc:282
+msgid ""
+"<qt>"
+"<p>The <i>general</i> portion of KPilot's setup contains settings for your "
+"hardware and the way KPilot should display your data. For the basic setup, "
+"which should fulfill the need of most users, just use the setup wizard "
+"below.</p>If you need some special settings, this dialog provides all the "
+"options for fine-tuning KPilot. But be warned: The HotSync settings are various "
+"esoteric things.</p>"
+"<p>You can enable an action or conduit by clicking on its checkbox. Checked "
+"conduits will be run during a HotSync. Select a conduit to configure it.</p>"
+"</qt>"
+msgstr ""
+
+#: kpilot/conduitConfigDialog.cc:295
+#, fuzzy
+msgid "Configuration Wizard"
+msgstr "Dijalog za podešavanje provoda"
+
+#: kpilot/conduitConfigDialog.cc:369
+msgid "About KPilot. Credits."
+msgstr ""
+
+#: kpilot/conduitConfigDialog.cc:372
+#, fuzzy
+msgid "Conduits"
+msgstr "Provod"
+
+#: kpilot/conduitConfigDialog.cc:374
+#, fuzzy
+msgid "General Setup"
+msgstr "Opšte"
+
+#: kpilot/conduitConfigDialog.cc:382
+msgid "General setup of KPilot (User name, port, general sync settings)"
+msgstr ""
+
+#: kpilot/conduitConfigDialog.cc:384
+msgid "Actions for HotSync with individual configuration."
+msgstr ""
+
+#: kpilot/conduitConfigDialog.cc:395 kpilot/kpilotConfigDialog.cc:470
+msgid "Startup and Exit"
+msgstr ""
+
+#: kpilot/conduitConfigDialog.cc:395
+msgid "Behavior at startup and exit."
+msgstr ""
+
+#. i18n: file ./kpilot/kpilotConfigDialog_viewers.ui line 33
+#: kpilot/conduitConfigDialog.cc:396 kpilot/kpilotConfigDialog.cc:418
+#: rc.cpp:1223
+#, fuzzy, no-c-format
+msgid "Viewers"
+msgstr "&Prikazivači"
+
+#: kpilot/conduitConfigDialog.cc:396
+msgid "Viewer settings."
+msgstr ""
+
+#: kpilot/conduitConfigDialog.cc:397
+msgid "Special settings for backup."
+msgstr ""
+
+#: kpilot/conduitConfigDialog.cc:398
+msgid "Special behavior during HotSync."
+msgstr ""
+
+#: kpilot/conduitConfigDialog.cc:399 kpilot/kpilotConfigDialog.cc:102
+#, fuzzy
+msgid "Device"
+msgstr "Opcije uređaja"
+
+#: kpilot/conduitConfigDialog.cc:399
+msgid "Hardware settings and startup and exit options."
+msgstr ""
+
+#: kpilot/conduitConfigDialog.cc:542
+#, fuzzy
+msgid ""
+"<qt>This is an internal action which has no configuration options. The action's "
+"description is: <i>%1</i> </qt>"
+msgstr "<qt>Ovo je interni provod koji nema postavki za podešavanje.</qt>"
+
+#: kpilot/conduitConfigDialog.cc:722
+#, fuzzy
+msgid "KPilot Setup"
+msgstr "KPilotTest"
+
+#: kpilot/conduitConfigDialog.cc:735
+msgid ""
+"<qt>No library could be found for the conduit %1. This means that the conduit "
+"was not installed properly.</qt>"
+msgstr ""
+"<qt>Nije mogla da se pronađe biblioteka za provod %1. Ovo znači da provod nije "
+"ispravno instaliran.</qt>"
+
+#: kpilot/conduitConfigDialog.cc:745 kpilot/conduitConfigDialog.cc:762
+msgid "Conduit Error"
+msgstr "Greška provoda"
+
+#: kpilot/conduitConfigDialog.cc:752
+msgid ""
+"<qt>There was a problem loading the library for the conduit %1. This means that "
+"the conduit was not installed properly.</qt>"
+msgstr ""
+"<qt>Došlo je do problema pri učitavanju biblioteke za provod %1. Ovo znači da "
+"provod nije ispravno instaliran.</qt>"
+
+#: kpilot/dbSelectionDialog.cc:108
+msgid ""
+"This is a database that exists on the device. It was not added manually, so it "
+"can not removed from the list."
+msgstr ""
+"Ovo je baza podataka koja postoji na uređaju. Nije ručno dodata, tako da se ne "
+"može ukloniti sa liste."
+
+#: kpilot/dbSelectionDialog.cc:108
+msgid "Database on Device"
+msgstr "Baza podataka na uređaju"
+
+#: kpilot/dbSelectionDialog.cc:119
+msgid "You need to select a database to delete in the list."
+msgstr "Morate izabrati iz liste bazu podatka koju želite da obrišete."
+
+#: kpilot/dbSelectionDialog.cc:119
+msgid "No Database Selected"
+msgstr "Nema izabrane baze podataka"
+
+#: kpilot/kpilotConfigWizard.cc:62
+#, fuzzy
+msgid "Pilot Info"
+msgstr "KPilot"
+
+#: kpilot/kpilotConfigWizard.cc:64
+msgid "Application to Sync With"
+msgstr ""
+
+#: kpilot/kpilotConfigWizard.cc:127
+msgid "general TDE-PIM"
+msgstr ""
+
+#: kpilot/kpilotConfigWizard.cc:133
+msgid ""
+"_: Gnome's PIM suite\n"
+"Evolution"
+msgstr ""
+
+#: kpilot/kpilotConfigWizard.cc:157
+msgid ""
+"KPilot cannot yet synchronize the addressbook with Evolution, so the "
+"addressbook conduit was disabled.\n"
+"When syncing the calendar or to-do list using KPilot please quit Evolution "
+"before the sync, otherwise you will lose data."
+msgstr ""
+
+#: kpilot/kpilotConfigWizard.cc:157
+msgid "Restrictions with Evolution"
+msgstr ""
+
+#: kpilot/kpilotConfigWizard.cc:162
+msgid ""
+"_: Kpilot will sync with nothing\n"
+"nothing (it will backup only)"
+msgstr ""
+
+#: kpilot/kpilotConfigWizard.cc:166
+msgid ""
+"_: TDE's PIM suite\n"
+"Kontact"
+msgstr ""
+
+#: kpilot/kpilotConfigWizard.cc:200
+#, fuzzy, c-format
+msgid "KPilot is now configured to sync with %1."
+msgstr "Pilot-ski uređaj još uvijek nije podešen."
+
+#: kpilot/kpilotConfigWizard.cc:205
+msgid ""
+"The remaining options in the config dialog are advanced options and can be used "
+"to fine-tune KPilot."
+msgstr ""
+
+#: kpilot/kpilotConfigWizard.cc:210
+#, fuzzy
+msgid "Automatic Configuration Finished"
+msgstr "Dijalog za podešavanje provoda"
+
+#: kpilot/kpilotConfigWizard.cc:217
+msgid ""
+"Please put the handheld in the cradle, press the hotsync button and click on "
+"\"Continue\".\n"
+"\n"
+"Some kernel versions (Linux 2.6.x) have problems with the visor kernel module "
+"(for Sony Clie devices). Running an autodetection in that case might block the "
+"computer from doing hotsyncs until it is rebooted. In that case it might be "
+"advisable not to continue."
+msgstr ""
+
+#: kpilot/kpilotConfigWizard.cc:223
+#, fuzzy
+msgid "Handheld Detection"
+msgstr "Drugi telefon na ručnom računaru:"
+
+#: kpilot/kpilotConfig.cc:163
+msgid "The configuration file is outdated."
+msgstr "Fajl sa podešavanjima je zastareo."
+
+#: kpilot/kpilotConfig.cc:165
+msgid "The configuration file has version %1, while KPilot needs version %2."
+msgstr ""
+"Fajl sa podešavanjima je verzije %1, a KPilot-u je potrebna verzija %2."
+
+#: kpilot/kpilotConfig.cc:170
+msgid ""
+"Please run KPilot and check the configuration carefully to update the file."
+msgstr "Pokrenite KPilot-a i pažljivo provjerite podešavanja."
+
+#: kpilot/kpilotConfig.cc:174
+msgid "Important changes to watch for are:"
+msgstr "Važne izmjene koje treba pratiti su:"
+
+#: kpilot/kpilotConfig.cc:178
+msgid ""
+"Renamed conduits, Kroupware and file installer have been made conduits as well."
+msgstr ""
+"Provodi su preimenovani, Kroupware i instalator fajlova su takođe načinjeni "
+"provodima."
+
+#: kpilot/kpilotConfig.cc:181
+msgid "Conflict resolution is now a global setting."
+msgstr "Razrešenje konflikta sada je globalna postavka."
+
+#: kpilot/kpilotConfig.cc:186
+msgid "Changed format of no-backup databases."
+msgstr ""
+
+#: kpilot/kpilotConfig.cc:199
+msgid ""
+"The configuration file for KPilot is out-of date. Please run KPilot to update "
+"it."
+msgstr ""
+"Fajl sa podešavanjima za KPilot-a je zastareo. Pokrenite KPilot-a da biste ga "
+"osvežili."
+
+#: kpilot/kpilotConfig.cc:202 kpilot/kpilotConfig.cc:327
+msgid "Configuration File Out-of Date"
+msgstr "Fajl sa podešavanjima je zastareo"
+
+#: kpilot/kpilotConfig.cc:220
+#, fuzzy
+msgid ""
+"The settings for the file installer have been moved to the conduits "
+"configuration. Check the installed conduits list."
+msgstr ""
+"Postavke za sinhronizovanje Kroupware-a sa KMail-om i instalatorom fajlova su "
+"premeštene u podešavanja provoda. Pogledajte listu instaliranih provoda."
+
+#: kpilot/kpilotConfig.cc:223
+msgid "Settings Updated"
+msgstr "Postavke su osvežene"
+
+#: kpilot/kpilotConfig.cc:248
+msgid ""
+"<qt>The following old conduits were found on your system. It is a good idea to "
+"remove them and the associated <tt>.la</tt> and <tt>.so.0</tt> files.</qt>"
+msgstr ""
+"<qt>Sljedeći zastareli provodi nađeni su na vašem sistemu. Dobro bi bilo da "
+"uklonite njih i njima pridružene <tt>.la</tt> i <tt>.so.0</tt> datoteke.</qt>"
+
+#: kpilot/kpilotConfig.cc:253
+msgid "Old Conduits Found"
+msgstr "Pronađeni su zastareli provodi"
+
+#: kpilot/kpilotConfig.cc:285
+msgid ""
+"<qt>The no backup databases listed in your configuration file have been "
+"adjusted to the new format. Database creator IDs have been changed to use "
+"square brackets []."
+msgstr ""
+
+#: kpilot/kpilotConfig.cc:289
+#, fuzzy
+msgid "No Backup Databases Updated"
+msgstr "Nema izabrane baze podataka"
+
+#: kpilot/kpilotConfig.cc:310
+msgid ""
+"KPilot is not configured for use. You may use the configuration wizard or the "
+"normal configure dialog to configure KPilot."
+msgstr ""
+
+#: kpilot/kpilotConfig.cc:313
+#, fuzzy
+msgid "Not Configured"
+msgstr "Podesi..."
+
+#: kpilot/kpilotConfig.cc:314
+msgid "Use &Wizard"
+msgstr ""
+
+#: kpilot/kpilotConfig.cc:315
+#, fuzzy
+msgid "Use &Dialog"
+msgstr "&Koristi KPilot"
+
+#: kpilot/kpilotConfig.cc:323
+msgid ""
+"The configuration file for KPilot is out-of date. KPilot can update some parts "
+"of the configuration automatically. Do you wish to continue?"
+msgstr ""
+"Fajl sa podešavanjima za KPilot-a je zastareo. KPilot može automatski da osveži "
+"neke delove tog datoteke. Želite li da nastavite?"
+
+#: kpilot/dbRecordEditor.cc:53
+#, fuzzy
+msgid "Edit Record"
+msgstr "Uredi slog..."
+
+#: kpilot/dbRecordEditor.cc:75
+msgid ""
+"Changing the record data and flags might corrupt the whole record, or even make "
+"the database unusable. Do not change the values unless you are absolutely sure "
+"you know what you are doing.\n"
+"\n"
+"Really assign these new flags?"
+msgstr ""
+"Izmjena podataka i zastavica sloga može učiniti ceo slog neispravnim, ili čak i "
+"bazu podataka neupotrebljivom. Nemojte mijenjati ove vrijednosti osim ako ste "
+"apsolutno sigurni da znate šta radite.\n"
+"\n"
+"Želite li zaista da dodijelite ove nove zastavice?"
+
+#: kpilot/dbRecordEditor.cc:75
+#, fuzzy
+msgid "Changing Record"
+msgstr "Menjam slog"
+
+#: kpilot/dbFlagsEditor.cc:60 kpilot/dbRecordEditor.cc:75
+#, fuzzy
+msgid "Assign"
+msgstr "Asistent"
+
+#. i18n: file ./kpilot/dbRecordEditor_base.ui line 24
+#: kpilot/dbRecordEditor.cc:106 rc.cpp:1388
+#, no-c-format
+msgid "Record index:"
+msgstr "Indeks slogova:"
+
+#. i18n: file ./kpilot/dbRecordEditor_base.ui line 32
+#: kpilot/dbRecordEditor.cc:107 rc.cpp:1391
+#, no-c-format
+msgid "Record ID:"
+msgstr "Id. sloga"
+
+#. i18n: file ./kpilot/todoEditor_base.ui line 99
+#: kpilot/dbRecordEditor.cc:108 kpilot/dbRecordEditor.cc:109 rc.cpp:980
+#: rc.cpp:1394 rc.cpp:1397
+#, no-c-format
+msgid "1"
+msgstr "1"
+
+#. i18n: file ./kpilot/dbRecordEditor_base.ui line 70
+#: kpilot/dbRecordEditor.cc:110 rc.cpp:1400
+#, no-c-format
+msgid "Flags"
+msgstr "Zastavice"
+
+#. i18n: file ./kpilot/dbRecordEditor_base.ui line 81
+#: kpilot/dbRecordEditor.cc:111 rc.cpp:1403
+#, no-c-format
+msgid "&Dirty"
+msgstr "&Prljav"
+
+#: kpilot/dbRecordEditor.cc:112
+msgid "De&leted"
+msgstr "&Obrisan"
+
+#: kpilot/dbRecordEditor.cc:113
+msgid "&Busy"
+msgstr "&Zauzet"
+
+#. i18n: file ./kpilot/dbRecordEditor_base.ui line 105
+#: kpilot/dbRecordEditor.cc:114 rc.cpp:1412
+#, no-c-format
+msgid "&Secret"
+msgstr "&Tajan"
+
+#. i18n: file ./kpilot/dbRecordEditor_base.ui line 113
+#: kpilot/dbRecordEditor.cc:115 rc.cpp:1415
+#, no-c-format
+msgid "&Archived"
+msgstr "&Arhiviran"
+
+#: kpilot/dbRecordEditor.cc:193
+msgid ""
+"To view and edit the record data, please install a hex editor (e.g. kbytesedit "
+"from tdeutils)."
+msgstr ""
+"Za pregled i izmjenu snimljenih podataka, instalirajte neki heksadecimalni "
+"editor (npr. khexedit)"
+
+#: kpilot/datebookWidget.cc:58 kpilot/dbviewerWidget.cc:109
+msgid "&Add..."
+msgstr "&Dodaj..."
+
+#: kpilot/datebookWidget.cc:61 kpilot/dbviewerWidget.cc:111
+msgid "&Edit..."
+msgstr "&Uredi..."
+
+#: kpilot/datebookWidget.cc:64
+msgid "&Delete..."
+msgstr "&Obriši..."
+
+#: kpilot/datebookWidget.cc:69
+msgid "Al"
+msgstr "Sve"
+
+#: kpilot/datebookWidget.cc:70
+msgid "Rec"
+msgstr "Slog"
+
+#: kpilot/datebookWidget.cc:71 kpilot/listCat.cc:85
+msgid "Description"
+msgstr "Opis"
+
+#: kpilot/dbFlagsEditor.cc:45
+msgid "Edit Database Flags"
+msgstr "Uredi zastavice baze podataka"
+
+#: kpilot/dbFlagsEditor.cc:60
+msgid ""
+"Changing the database flags might corrupt the whole database, or make the data "
+"unusable. Do not change the values unless you are absolutely sure you know what "
+"you are doing.\n"
+"\n"
+"Really assign these new flags?"
+msgstr ""
+"Izmjena zastavica baze podataka može učiniti celu bazu neispravnom, ili učiniti "
+"podatke neupotrebljivim. Nemojte mijenjati ove vrijednosti osim ako ste "
+"apsolutno sigurni da znate šta radite.\n"
+"\n"
+"Želite li zaista da dodijelite ove nove zastavice?"
+
+#: kpilot/dbFlagsEditor.cc:60
+#, fuzzy
+msgid "Changing Database Flags"
+msgstr "Menjam zastavice baze podataka"
+
+#: kpilot/todoEditor.cc:49
+#, fuzzy
+msgid "To-do Editor"
+msgstr "Uređivač zadataka"
+
+#: kpilot/logWidget.cc:98
+msgid ""
+"<qt>This lists all the messages received during the current HotSync</qt>"
+msgstr ""
+"<qt>Ovo lista sve poruke koje su primljene u toku vruće sinhronizacije</qt>"
+
+#: kpilot/logWidget.cc:127
+#, fuzzy
+msgid "<qt><b>HotSync Log</b></qt>"
+msgstr "<qt><b>Dnevnik vruće sinhronizacije</b></qt>"
+
+#: kpilot/logWidget.cc:142
+msgid ""
+"_: Clear the text of HotSync messages\n"
+"Clear Log"
+msgstr "Isprazni dnevnik"
+
+#: kpilot/logWidget.cc:144
+msgid "<qt>Clears the list of messages from the current HotSync.</qt>"
+msgstr "<qt>Čisti se lista poruka iz tekuće vruće sinhronizacije.</qt>"
+
+#: kpilot/logWidget.cc:148
+msgid "Save Log..."
+msgstr "Snimi dnevnik..."
+
+#: kpilot/logWidget.cc:149
+msgid ""
+"<qt>You can save the list of messages received during this HotSync to a file "
+"(for example for use in a bug report) by clicking here.</qt>"
+msgstr ""
+"<qt>Možete snimiti u datoteka listu poruka primljenih u toku vruće "
+"sinhronizacije (na primjer radi sastavljanja izvještaja o grešci) tako što ćete "
+"kliknuti na ovo dugme.</qt>"
+
+#: kpilot/logWidget.cc:158
+msgid "Sync progress:"
+msgstr "Napredak sinhronizacije:"
+
+#: kpilot/logWidget.cc:161
+msgid "<qt>The (estimated) percentage completed in the current HotSync.</qt>"
+msgstr "<qt>Procenat završenosti (procenjen) tekuće sinhronizacije.</qt>"
+
+#: kpilot/logWidget.cc:283
+#, fuzzy
+msgid "<b>HotSync Finished.</b>"
+msgstr "<b>Vruća sinhronizacija je završena!</b>"
+
+#: kpilot/logWidget.cc:347
+msgid "Save Log"
+msgstr "Snimi dnevnik"
+
+#: kpilot/logWidget.cc:354
+msgid "The file exists. Do you want to overwrite it?"
+msgstr "Fajl već postoji. Želite li da ga prebrišete?"
+
+#: kpilot/logWidget.cc:356
+msgid "File Exists"
+msgstr "Fajl već postoji"
+
+#: kpilot/logWidget.cc:356
+#, fuzzy
+msgid "Do Not Overwrite"
+msgstr "&Prebriši"
+
+#: kpilot/logWidget.cc:380
+#, fuzzy
+msgid "<qt>Cannot open the file &quot;%1&quot; for writing; try again?</qt>"
+msgstr ""
+"<qt>Fajl '%1' ne može da se otvori za upis. Da li da pokušam ponovo?</qt>"
+
+#: kpilot/logWidget.cc:382
+#, fuzzy
+msgid "Cannot Save"
+msgstr "Ne mogu da snimim"
+
+#: kpilot/logWidget.cc:382
+msgid "Try Again"
+msgstr ""
+
+#: kpilot/logWidget.cc:382
+#, fuzzy
+msgid "Do Not Try"
+msgstr "Ne radi ništa"
+
+#: kpilot/pilotDaemon.cc:157
+msgid "Start &KPilot"
+msgstr "Po&kreni KPilot-a"
+
+#: kpilot/pilotDaemon.cc:159
+#, fuzzy
+msgid "&Configure KPilot..."
+msgstr "&Podesi izabrani..."
+
+#: kpilot/pilotDaemon.cc:164
+msgid ""
+"_: Appended to names of sync types to indicate the sync will happen just one "
+"time\n"
+" (once)"
+msgstr ""
+
+#: kpilot/pilotDaemon.cc:168
+#, fuzzy
+msgid "Default (%1)"
+msgstr "&Posebna sinhronizacija:"
+
+#: kpilot/pilotDaemon.cc:185
+#, fuzzy
+msgid "Next &Sync"
+msgstr "Bez sinhronizacije"
+
+#: kpilot/pilotDaemon.cc:670
+#, fuzzy
+msgid "Next HotSync will be: %1. "
+msgstr "&Normalna sinhronizacija, napravi rezervnu kopiju"
+
+#: kpilot/kpilot.cc:361 kpilot/kpilot.cc:369 kpilot/kpilot.cc:377
+#: kpilot/kpilot.cc:385 kpilot/kpilot.cc:393 kpilot/kpilot.cc:401
+#: kpilot/pilotDaemon.cc:671
+msgid "Please press the HotSync button."
+msgstr "Pritisnite dugme Vruća sinhronizacija."
+
+#: kpilot/kpilot.cc:278 kpilot/kpilot.cc:281 kpilot/pilotDaemon.cc:736
+msgid "File Installer"
+msgstr "Instalator fajlova"
+
+#: kpilot/pilotDaemon.cc:902
+msgid "HotSync is disabled while the screen is locked."
+msgstr ""
+
+#: kpilot/pilotDaemon.cc:907
+msgid ""
+"HotSync is disabled because KPilot could not determine the state of the screen "
+"saver. You can disable this security feature by unchecking the 'do not sync "
+"when screensaver is active' box in the HotSync page of the configuration "
+"dialog."
+msgstr ""
+
+#: kpilot/pilotDaemon.cc:1165 kpilot/pilotDaemon.cc:1166
+msgid "HotSync Completed.<br>"
+msgstr "Vruća sinhronizacija je završena.<br>"
+
+#: kpilot/pilotDaemon.cc:1274
+#, c-format
+msgid "Next sync is %1."
+msgstr ""
+
+#: kpilot/kpilot.cc:993 kpilot/pilotDaemon.cc:1296
+msgid "Set debugging level"
+msgstr "Postavi nivo otkrivanja grešaka"
+
+#: kpilot/pilotDaemon.cc:1298
+msgid "Device to try first"
+msgstr ""
+
+#: kpilot/pilotDaemon.cc:1299
+msgid "Exit instead of complaining about bad configuration files"
+msgstr ""
+
+#: kpilot/pilotDaemon.cc:1311
+msgid "KPilot Daemon"
+msgstr "KPilot demon"
+
+#: kpilot/kpilot.cc:1024 kpilot/pilotDaemon.cc:1320
+msgid "Project Leader"
+msgstr "Vođa projekta"
+
+#: kpilot/pilotDaemon.cc:1326
+#, fuzzy
+msgid "Developer"
+msgstr "Glavni programer"
+
+#: kpilot/kroupware.cc:126
+#, fuzzy
+msgid "Syncing to-dos with KMail"
+msgstr "Sinhronizujem sa datotekom '%1'"
+
+#: kpilot/kroupware.cc:135
+#, fuzzy
+msgid "Syncing calendar with KMail"
+msgstr "Sinhronizujem sa datotekom '%1'"
+
+#: kpilot/kroupware.cc:177
+#, fuzzy
+msgid "Syncing Notes with Mail"
+msgstr "Sinhronizujem sa datotekom '%1'"
+
+#: kpilot/kroupware.cc:188
+#, fuzzy
+msgid "Rewriting to-dos to KMail..."
+msgstr "Sinhronizujem sa datotekom '%1'"
+
+#: kpilot/kroupware.cc:195
+msgid "Rewriting Calendar to KMail"
+msgstr ""
+
+#: kpilot/kroupware.cc:230
+msgid "Syncing KMail with Addresses "
+msgstr ""
+
+#: kpilot/kroupware.cc:259
+#, fuzzy
+msgid "Syncing KMail with Notes"
+msgstr "Sinhronizujem sa datotekom '%1'"
+
+#: kpilot/dbAppInfoEditor.cc:46
+msgid "Edit AppInfo Block"
+msgstr "Uredi info-blok programa"
+
+#: kpilot/dbAppInfoEditor.cc:68
+msgid ""
+"To view the Application info block data, please install a hex editor (e.g. "
+"khexedit from tdeutils)."
+msgstr ""
+"Da biste gledali podatke info bloka programa, instalirajte neki heksadecimalni "
+"editor (npr. khexedit)"
+
+#: kpilot/dbAppInfoEditor.cc:86
+msgid "Changing the AppInfo block isn't yet supported by KPilot!"
+msgstr ""
+
+#: kpilot/memoWidget.cc:234
+msgid ""
+"Select the category of addresses\n"
+"to display here."
+msgstr ""
+"Izaberite kategoriju adresa koje\n"
+"ovdje treba prikazati."
+
+#: kpilot/memoWidget.cc:237
+msgid "Memos:"
+msgstr "Beleške:"
+
+#: kpilot/addressWidget.cc:226 kpilot/memoWidget.cc:238
+#: kpilot/todoWidget.cc:220
+msgid "Category:"
+msgstr "Kategorija:"
+
+#: kpilot/memoWidget.cc:249
+msgid ""
+"This list displays all the memos\n"
+"in the selected category. Click on\n"
+"one to display it to the right."
+msgstr ""
+"Ova lista prikazuje sve beleške u\n"
+"izabranoj kategoriji. Kliknite na neku\n"
+"od njih da biste je pregledali desno."
+
+#: kpilot/memoWidget.cc:253
+msgid "Memo text:"
+msgstr "Tekst beleške:"
+
+#: kpilot/memoWidget.cc:261
+msgid "The text of the selected memo appears here."
+msgstr "Ovdje se prikazuje tekst izabrane beleške."
+
+#: kpilot/memoWidget.cc:264
+msgid "Import Memo..."
+msgstr "Uvezi belešku..."
+
+#: kpilot/memoWidget.cc:268
+msgid "Read a text file and add it to the Pilot's memo database."
+msgstr "Učitava se tekstualni datoteka i dodaje Pilot-ovoj bazi beleški."
+
+#: kpilot/memoWidget.cc:269
+msgid "<qt><i>Import is disabled by the 'internal editors' setting.</i></qt>"
+msgstr ""
+
+#: kpilot/memoWidget.cc:272
+msgid "Export Memo..."
+msgstr "Izvezi belešku..."
+
+#: kpilot/memoWidget.cc:277
+msgid "Write the selected memo to a file."
+msgstr "Izabrana beleška se zapisuje u datoteka."
+
+#: kpilot/memoWidget.cc:279
+msgid "Delete Memo"
+msgstr "Obriši belešku"
+
+#: kpilot/memoWidget.cc:284
+msgid "Delete the selected memo."
+msgstr "Briše se izabrana beleška."
+
+#: kpilot/addressWidget.cc:275 kpilot/memoWidget.cc:285
+#: kpilot/todoWidget.cc:281
+msgid "<qt><i>Deleting is disabled by the 'internal editors' setting.</i></qt>"
+msgstr ""
+
+#: kpilot/memoWidget.cc:288
+msgid "Add Memo"
+msgstr ""
+
+#: kpilot/memoWidget.cc:291
+msgid "Add a new memo to the database."
+msgstr ""
+
+#: kpilot/memoWidget.cc:343
+msgid "Delete currently selected memo?"
+msgstr "Da li da obrišem trenutno izabranu belešku?"
+
+#: kpilot/memoWidget.cc:344
+msgid "Delete Memo?"
+msgstr "Da li da obrišem belešku?"
+
+#: kpilot/memoWidget.cc:367
+msgid "Cannot open MemoDB to delete record."
+msgstr ""
+
+#: kpilot/memoWidget.cc:368
+#, fuzzy
+msgid "Cannot Delete Memo"
+msgstr "Obriši belešku"
+
+#: kpilot/addressEditor.cc:60
+msgid "Address Editor"
+msgstr "Uređivač adresa"
+
+#: kpilot/addressEditor.cc:108
+msgid "Phone"
+msgstr "Telefon"
+
+#: kpilot/addressEditor.cc:181
+msgid "Last name:"
+msgstr "Prezime:"
+
+#: kpilot/addressEditor.cc:182
+msgid "First name:"
+msgstr "Ime:"
+
+#: kpilot/addressEditor.cc:183
+msgid "Title:"
+msgstr "Titula:"
+
+#: kpilot/addressEditor.cc:184
+msgid "Company:"
+msgstr "Firma:"
+
+#: kpilot/addressEditor.cc:193
+msgid "Address:"
+msgstr "Adresa:"
+
+#: kpilot/addressEditor.cc:194
+msgid "City:"
+msgstr "Grad:"
+
+#: kpilot/addressEditor.cc:195
+msgid "State:"
+msgstr "Država:"
+
+#: kpilot/addressEditor.cc:196
+msgid "Zip code:"
+msgstr "Poštanski broj:"
+
+#: kpilot/addressEditor.cc:197
+msgid "Country:"
+msgstr "Država:"
+
+#: kpilot/addressEditor.cc:198
+msgid "Custom 1:"
+msgstr "Posebno 1:"
+
+#: kpilot/addressEditor.cc:199
+msgid "Custom 2:"
+msgstr "Posebno 2:"
+
+#: kpilot/addressEditor.cc:200
+msgid "Custom 3:"
+msgstr "Posebno 3:"
+
+#: kpilot/addressEditor.cc:201
+msgid "Custom 4:"
+msgstr "Posebno 4:"
+
+#: kpilot/pilotComponent.cc:153
+msgid "All"
+msgstr "Sve"
+
+#: kpilot/kpilotConfigDialog.cc:68
+#, fuzzy
+msgid ""
+"<qt>The settings for configuration page <i>%1</i> have been changed. Do you "
+"want to save the changes before continuing?</qt>"
+msgstr ""
+"<qt>Postavke provoda <i>%1</i> su izmenjene. Želite li da snimite izmjene pre "
+"nego što se nastavi dalje?</qt>"
+
+#: kpilot/kpilotConfigDialog.cc:145
+msgid ""
+"<qt>The device name you entered (<i>%1</i>) is longer than 13 characters. This "
+"is probably unsupported and can cause problems. Are you sure you want to use "
+"this device name?</qt>"
+msgstr ""
+"<qt>Ime uređaja koje ste uneli (<i>%1</i>) duže je od 13 znakova. Ovo "
+"vjerovatno nije podržano i može izazvati probleme. Želite li zaista da "
+"koristite ovakvo ime uređaja?</qt>"
+
+#: kpilot/kpilotConfigDialog.cc:150
+msgid "Device Name too Long"
+msgstr "Ime uređaja je predugačko"
+
+#: kpilot/kpilotConfigDialog.cc:150
+msgid "Use"
+msgstr ""
+
+#: kpilot/kpilotConfigDialog.cc:150
+#, fuzzy
+msgid "Do Not Use"
+msgstr "Ne šalji poštu"
+
+#: kpilot/dbviewerWidget.cc:84
+msgid "All Databases"
+msgstr "Sve baze podataka"
+
+#: kpilot/dbviewerWidget.cc:85
+msgid "Only Applications (*.prc)"
+msgstr "Samo programi (*.prc)"
+
+#: kpilot/dbviewerWidget.cc:86
+msgid "Only Databases (*.pdb)"
+msgstr "Samo baze podataka (*.pdb)"
+
+#: kpilot/dbviewerWidget.cc:93
+#, fuzzy
+msgid "General Database &Information"
+msgstr "Ošpte informacije o &bazi podataka..."
+
+#: kpilot/dbviewerWidget.cc:95
+msgid "&Application Info Block (Categories etc.)"
+msgstr "Informacioni blok &programa (kategorije, itd.)"
+
+#: kpilot/dbviewerWidget.cc:101
+msgid "Rec. Nr."
+msgstr "Broj sloga"
+
+#: kpilot/dbviewerWidget.cc:102
+msgid "Length"
+msgstr "Dužina"
+
+#: kpilot/dbviewerWidget.cc:103
+msgid "Record ID"
+msgstr "Id. sloga"
+
+#: kpilot/dbviewerWidget.cc:189
+#, c-format
+msgid "<B>Warning:</B> Cannot read database file %1."
+msgstr "<B>Upozorenje:</B> Fajl baze podataka %1 ne može da se pročita."
+
+#: kpilot/dbviewerWidget.cc:194
+msgid "<B>Database:</B> %1, %2 records<BR>"
+msgstr "<B>Baza podataka:</B> %1, %2 slogova<BR>"
+
+#: kpilot/dbviewerWidget.cc:203
+msgid "<B>Type:</B> %1, <B>Creator:</B> %2<br><br>"
+msgstr "<B>Vrsta:</B> %1, <B>Kreator:</B> %2<BR><BR>"
+
+#: kpilot/dbviewerWidget.cc:246 kpilot/dbviewerWidget.cc:253
+#, c-format
+msgid "<B>Warning:</B> Cannot read application file %1."
+msgstr "<B>Upozorenje:</B> Programski datoteka %1 ne može da se pročita."
+
+#: kpilot/dbviewerWidget.cc:260
+msgid "<B>Application:</B> %1<BR><BR>"
+msgstr "<B>Program:</B> %1<BR><BR>"
+
+#: kpilot/dbviewerWidget.cc:267
+msgid "Created: %1<BR>"
+msgstr "Napravljen: %1<BR>"
+
+#: kpilot/dbviewerWidget.cc:270
+msgid "Modified: %1<BR>"
+msgstr "Izmenjen: %1<BR>"
+
+#: kpilot/dbviewerWidget.cc:273
+msgid "Backed up: %1<BR>"
+msgstr "Napravljena rezervna kopija: %1<BR>"
+
+#: kpilot/dbviewerWidget.cc:353
+msgid "You must select a record for editing."
+msgstr "Morate da izaberete slog za uređivanje."
+
+#: kpilot/dbviewerWidget.cc:353
+#, fuzzy
+msgid "No Record Selected"
+msgstr "Nema izabranog sloga"
+
+#: kpilot/dbviewerWidget.cc:366
+msgid ""
+"<qt>Do you really want to delete the selected record? This cannot be undone."
+"<br>"
+"<br>Delete record?<qt>"
+msgstr ""
+"<qt>Želite li zaista da obrišete izabrani slog? Ova operacija ne može kasnije "
+"da se poništi."
+"<br>"
+"<br>Da li da obrišem slog?<qt>"
+
+#: kpilot/dbviewerWidget.cc:366
+#, fuzzy
+msgid "Deleting Record"
+msgstr "Brišem slog"
+
+#: kpilot/todoWidget.cc:174
+#, fuzzy
+msgid "There are still %1 to-do editing windows open."
+msgstr "Još uvijek je otvoreno %1 prozora za uređivanje zadataka."
+
+#: kpilot/todoWidget.cc:178
+#, fuzzy, c-format
+msgid ""
+"_n: There is still a to-do editing window open.\n"
+"There are still %n to-do editing windows open."
+msgstr ""
+"Još uvijek je otvoren %n prozor za uređivanje zadatka.\n"
+"Još uvijek su otvorena %n prozora za uređivanje zadataka.\n"
+"Još uvijek je otvoreno %n prozora za uređivanje zadataka."
+
+#: kpilot/todoWidget.cc:218
+#, fuzzy
+msgid "<qt>Select the category of to-dos to display here.</qt>"
+msgstr "<qt>Izaberite kategoriju zadataka koji treba da se prikažu ovdje.</qt>"
+
+#: kpilot/todoWidget.cc:225
+#, fuzzy
+msgid "To-do Item"
+msgstr "Stavka zadatka"
+
+#: kpilot/todoWidget.cc:243
+#, fuzzy
+msgid ""
+"<qt>This list displays all the to-dos in the selected category. Click on one to "
+"display it to the right.</qt>"
+msgstr ""
+"<qt>Ova lista prikazuje sve zadatke u izabranoj kategoriji. Kliknite na neki od "
+"njih da biste ga prikazali desno.</qt>"
+
+#: kpilot/todoWidget.cc:247
+#, fuzzy
+msgid "To-do info:"
+msgstr "Informacije o zadatku:"
+
+#: kpilot/addressWidget.cc:251 kpilot/todoWidget.cc:257
+msgid "Edit Record..."
+msgstr "Uredi slog..."
+
+#: kpilot/todoWidget.cc:262
+#, fuzzy
+msgid "<qt>You can edit a to-do when it is selected.</qt>"
+msgstr "<qt>Možete uređivati zadatak kada je izabran.</qt>"
+
+#: kpilot/addressWidget.cc:256 kpilot/todoWidget.cc:263
+msgid "<qt><i>Editing is disabled by the 'internal editors' setting.</i></qt>"
+msgstr ""
+
+#: kpilot/addressWidget.cc:259 kpilot/todoWidget.cc:266
+msgid "New Record..."
+msgstr "Novi slog..."
+
+#: kpilot/todoWidget.cc:270
+#, fuzzy
+msgid "<qt>Add a new to-do to the to-do list.</qt>"
+msgstr "<qt>Dodaje se novi zadatak u listu zadataka.</qt>"
+
+#: kpilot/todoWidget.cc:271
+msgid ""
+"<qt><i>Adding new to-dos is disabled by the 'internal editors' setting.</i></qt>"
+msgstr ""
+
+#: kpilot/addressWidget.cc:269 kpilot/todoWidget.cc:275
+msgid "Delete Record"
+msgstr "Obriši slog"
+
+#: kpilot/todoWidget.cc:280
+#, fuzzy
+msgid "<qt>Delete the selected to-do from the to-do list.</qt>"
+msgstr "<qt>Briše se trenutno izabrani zadatak iz liste zadataka.</qt>"
+
+#: kpilot/addressWidget.cc:435 kpilot/todoWidget.cc:363
+msgid "Cannot edit new records until HotSynced with Pilot."
+msgstr "Novi slogovi ne mogu da se uređuju dok se ne sinhronizuju sa Pilot-om."
+
+#: kpilot/addressWidget.cc:437 kpilot/addressWidget.cc:574
+#: kpilot/todoWidget.cc:365 kpilot/todoWidget.cc:498
+msgid "HotSync Required"
+msgstr "Morate uraditi vruću sinhronizaciju"
+
+#: kpilot/todoWidget.cc:408
+#, fuzzy
+msgid ""
+"You cannot add to-dos to the to-do list until you have done a HotSync at least "
+"once to retrieve the database layout from your Pilot."
+msgstr ""
+"Ne možete dodavati zadatke u listu zadataka sve dok se bar jednom ne uradi "
+"vruća sinhronizacija da bi se dobavio izgled baze podataka sa vašeg Pilot-a."
+
+#: kpilot/todoWidget.cc:411
+#, fuzzy
+msgid "Cannot Add New To-do"
+msgstr "Ne mogu da dodam novi zadatak"
+
+#: kpilot/addressWidget.cc:572 kpilot/todoWidget.cc:496
+msgid "New records cannot be deleted until HotSynced with pilot."
+msgstr "Novi zadaci ne mogu da se obrišu dok se ne sinhronizuju sa Pilot-om."
+
+#: kpilot/addressWidget.cc:579 kpilot/todoWidget.cc:503
+msgid "Delete currently selected record?"
+msgstr "Da li da obrišem trenutno izabrani slog?"
+
+#: kpilot/addressWidget.cc:580 kpilot/todoWidget.cc:504
+msgid "Delete Record?"
+msgstr "Da li da obrišem slog?"
+
+#: kpilot/internalEditorAction.cc:62
+msgid "[Internal Editors]"
+msgstr ""
+
+#: kpilot/internalEditorAction.cc:76
+#, c-format
+msgid "Databases with changed records: %1"
+msgstr "Baze podataka sa izmenjenim slogovima: %1"
+
+#: kpilot/internalEditorAction.cc:101
+msgid "Unable to open the serial or local database for %1. Skipping it."
+msgstr ""
+"Ne mogu da otvorim serijsku ili lokalnu bazu podataka za %1. Preskačem je."
+
+#: kpilot/internalEditorAction.cc:156
+msgid "record"
+msgstr "slog"
+
+#: kpilot/internalEditorAction.cc:166
+msgid "address"
+msgstr "adresa"
+
+#: kpilot/internalEditorAction.cc:177
+#, fuzzy
+msgid "to-do entry"
+msgstr "zadatak"
+
+#: kpilot/internalEditorAction.cc:186
+msgid "memo"
+msgstr "beleška"
+
+#: kpilot/internalEditorAction.cc:197
+msgid "calendar entry"
+msgstr "kalendar"
+
+#: kpilot/internalEditorAction.cc:204
+msgid ""
+"The %1 with ID %2 of the database \"%3\" was changed on the handheld and in the "
+"internal editor. Shall the changes in KPilot be copied to the handheld, and so "
+"override the changes there?"
+msgstr ""
+"%1 sa id. %2 baze '%3' promenjen je i na ručnom računaru i u internom "
+"uređivaču. Da li da se promjene u KPilot-u kopiraju na ručni računar i time "
+"pregaze tamošnje izmjene?"
+
+#: kpilot/internalEditorAction.cc:209
+#, c-format
+msgid "Conflict in database  %1"
+msgstr "Konflikt u bazi podataka %1"
+
+#: kpilot/internalEditorAction.cc:211
+msgid "Use KPilot"
+msgstr "Koristi KPilot"
+
+#: kpilot/internalEditorAction.cc:211
+msgid "Use Handheld"
+msgstr "Koristi ručni računar"
+
+#: kpilot/internalEditorAction.cc:212
+msgid "Use &KPilot"
+msgstr "&Koristi KPilot"
+
+#: kpilot/internalEditorAction.cc:213
+msgid "Use &Handheld"
+msgstr "Koristi &ručni računar"
+
+#: kpilot/internalEditorAction.cc:228 kpilot/internalEditorAction.cc:244
+msgid "Entry in KPilot"
+msgstr "Stavka u KPilot-u"
+
+#: kpilot/internalEditorAction.cc:235 kpilot/internalEditorAction.cc:272
+msgid "Entry on Handheld"
+msgstr "Stavka na ručnom računaru"
+
+#: kpilot/internalEditorAction.cc:263 kpilot/internalEditorAction.cc:291
+msgid ""
+"To view and edit the record data, please install a hex editor (e.g. khexedit "
+"from tdeutils)."
+msgstr ""
+"Da biste gledali i uređivali snimljene podatke, instalirajte neki "
+"heksadecimalni editor (npr. khexedit)"
+
+#: kpilot/internalEditorAction.cc:315
+#, c-format
+msgid "Databases with changed flags: %1"
+msgstr "Baze podataka sa izmenjenim zastavicama: %1"
+
+#: kpilot/internalEditorAction.cc:333
+msgid "Setting the database flags on the handheld is not yet supported."
+msgstr ""
+"Postavljanje zastavica baza podataka na ručnom računaru još uvijek nije "
+"podržano."
+
+#: kpilot/internalEditorAction.cc:356
+#, c-format
+msgid "Databases with changed AppBlock: %1"
+msgstr "Baze podataka sa izmenjenim info-blokovima programa: %1"
+
+#: kpilot/kpilotProbeDialog.cc:90
+msgid "Autodetecting Your Handheld"
+msgstr ""
+
+#: kpilot/kpilotProbeDialog.cc:90
+msgid "Restart Detection"
+msgstr ""
+
+#: kpilot/kpilotProbeDialog.cc:97
+msgid ""
+"KPilot is now trying to automatically detect the device of your handheld. "
+"Please press the hotsync button if you have not done so already."
+msgstr ""
+
+#: kpilot/kpilotProbeDialog.cc:100
+#, fuzzy
+msgid "Status"
+msgstr "Država:"
+
+#: kpilot/kpilotProbeDialog.cc:104
+msgid "Autodetection not yet started..."
+msgstr ""
+
+#: kpilot/kpilotProbeDialog.cc:113
+msgid "Detected Values"
+msgstr ""
+
+#: kpilot/kpilotProbeDialog.cc:119
+#, fuzzy
+msgid "Handheld user:"
+msgstr "Faks na ručnom računaru:"
+
+#: kpilot/kpilotProbeDialog.cc:123
+msgid "Device:"
+msgstr ""
+
+#: kpilot/kpilotProbeDialog.cc:126 kpilot/kpilotProbeDialog.cc:129
+msgid "[Not yet known]"
+msgstr ""
+
+#: kpilot/kpilotProbeDialog.cc:195
+#, fuzzy
+msgid "Starting detection..."
+msgstr "Pokrećem KPilot-ovog demona ..."
+
+#: kpilot/kpilotProbeDialog.cc:233
+msgid "Waiting for handheld to connect..."
+msgstr ""
+
+#: kpilot/kpilotProbeDialog.cc:266
+msgid "Timeout reached, could not detect a handheld."
+msgstr ""
+
+#: kpilot/kpilotProbeDialog.cc:267
+msgid ""
+"<qt>A handheld could not be detected. Possible check the following things:</p>"
+"<ul>"
+"<li> Have you pressed the hotsync button on the handheld?\n"
+"<li> Make sure the device sits in the cradle correctly.\n"
+"<li> Make sure the cradle is correctly plugged in to the computer.\n"
+"<li> Have you checked that your device is actually supported by kpilot (see "
+"http://www.kpilot.org).\n"
+"</ul>"
+msgstr ""
+
+#: kpilot/kpilotProbeDialog.cc:273
+#, fuzzy
+msgid "Automatic Detection Failed"
+msgstr "Dijalog za podešavanje provoda"
+
+#: kpilot/kpilotProbeDialog.cc:288
+#, c-format
+msgid "Found a connected device on %1"
+msgstr ""
+
+#: kpilot/kpilotProbeDialog.cc:338
+msgid "Disconnected from all devices"
+msgstr ""
+
+#: kpilot/fileInstallWidget.cc:71
+msgid "Files to install:"
+msgstr "Fajlovi za instaliranje:"
+
+#: kpilot/fileInstallWidget.cc:77
+msgid "Add File..."
+msgstr "Dodaj datoteka..."
+
+#: kpilot/fileInstallWidget.cc:81
+msgid "<qt>Choose a file to add to the list of files to install.</qt>"
+msgstr ""
+"<qt>Izaberite datoteka koji želite da dodate u listu fajlova za "
+"instaliranje.</qt>"
+
+#: kpilot/fileInstallWidget.cc:83
+msgid "Clear List"
+msgstr "Isprazni listu"
+
+#: kpilot/fileInstallWidget.cc:87
+msgid ""
+"<qt>Clear the list of files to install. No files will be installed.</qt>"
+msgstr ""
+"<qt>Prazni se lista fajlova za instaliranje. Nijedan datoteka neće biti "
+"instaliran.</qt>"
+
+#: kpilot/fileInstallWidget.cc:95
+msgid ""
+"<qt>This lists files that will be installed on the Pilot during the next "
+"HotSync. Drag files here or use the Add button.</qt>"
+msgstr ""
+"<qt>Ovo lista datoteke koji će biti instalirani na Pilot u toku sljedeće vruće "
+"sinhronizacije. Prevucite datoteke ovdje ili koristite dugme Dodaj.</qt>"
+
+#: kpilot/fileInstallWidget.cc:217
+msgid "*.pdb *.prc|PalmOS Databases (*.pdb *.prc)"
+msgstr ""
+
+#: kpilot/fileInstallWidget.cc:291
+msgid ""
+"_: Delete a single file item\n"
+"Delete"
+msgstr ""
+
+#: kpilot/fileInstallWidget.cc:294
+#, fuzzy
+msgid "Delete selected files"
+msgstr "Briše se izabrana beleška."
+
+#: kpilot/hotSync.cc:339
+#, c-format
+msgid "Backup directory: %1."
+msgstr ""
+
+#: kpilot/hotSync.cc:353
+msgid "Full backup started."
+msgstr "Započeto je pravljenje pune rezervne kopije."
+
+#: kpilot/hotSync.cc:358
+msgid "Fast backup started"
+msgstr "Započeto je pravljenje brze rezervne kopije."
+
+#: kpilot/hotSync.cc:387
+msgid "Exiting on cancel."
+msgstr "Obustavljam na zahtev."
+
+#: kpilot/hotSync.cc:399
+msgid "Full backup complete."
+msgstr "Pravljenje pune rezervne kopije je završeno."
+
+#: kpilot/hotSync.cc:403
+msgid "Fast backup complete."
+msgstr "Pravljenje brze rezervne kopije je završeno."
+
+#: kpilot/hotSync.cc:419
+#, c-format
+msgid "Backing up: %1"
+msgstr "Pravim rezervnu kopiju: %1"
+
+#: kpilot/hotSync.cc:447
+#, c-format
+msgid "Skipping %1"
+msgstr ""
+
+#: kpilot/hotSync.cc:482
+msgid ""
+"Backup of %1 failed.\n"
+msgstr ""
+"Pravljenje rezervne kopije za %1 nije uspelo.\n"
+
+#: kpilot/hotSync.cc:540
+#, fuzzy
+msgid ""
+"... OK.\n"
+msgstr ""
+" .. U redu\n"
+
+#: kpilot/hotSync.cc:548
+#, fuzzy
+msgid "Backup failed."
+msgstr ""
+"Pravljenje rezervne kopije za %1 nije uspelo.\n"
+
+#: kpilot/hotSync.cc:607
+msgid "[File Installer]"
+msgstr "[Instalator fajlova]"
+
+#: kpilot/hotSync.cc:612
+msgid "No Files to install"
+msgstr "Nema fajlova za instaliranje"
+
+#: kpilot/hotSync.cc:624
+#, c-format
+msgid ""
+"_n: Installing one file\n"
+"Installing %n Files"
+msgstr ""
+"Instaliram %n datoteka\n"
+"Instaliram %n datoteke\n"
+"Instaliram %n fajlova"
+
+#: kpilot/hotSync.cc:649
+msgid "Done Installing Files"
+msgstr "Instaliranje fajlova je završeno"
+
+#: kpilot/hotSync.cc:663
+#, c-format
+msgid "Installing %1"
+msgstr "Instaliram %1"
+
+#: kpilot/hotSync.cc:686
+#, fuzzy
+msgid "Cannot install file &quot;%1&quot;."
+msgstr "Ne mogu da instaliram datoteka '%1'!"
+
+#: kpilot/hotSync.cc:713 kpilot/hotSync.cc:723
+#, fuzzy
+msgid "Unable to open file &quot;%1&quot;."
+msgstr "Ne mogu da otvorim datoteka '%1'!"
+
+#: kpilot/hotSync.cc:732
+#, fuzzy
+msgid "Unable to read file &quot;%1&quot;."
+msgstr "Ne mogu da otvorim datoteka '%1'!"
+
+#: kpilot/hotSync.cc:748
+msgid ""
+"The database in &quot;%1&quot; has a resource name that is longer than 31 "
+"characters. This suggests a bug in the tool used to create the database. KPilot "
+"cannot install this database."
+msgstr ""
+
+#: kpilot/hotSync.cc:806
+msgid ""
+"_: A common name\n"
+"John Doe"
+msgstr "Pera Perić"
+
+#: kpilot/hotSync.cc:808
+#, fuzzy
+msgid ""
+"<qt>Neither KPilot nor the handheld have a username set. They <i>should</i> "
+"be set. Should KPilot set them to a default value (<i>%1</i>)?</qt>"
+msgstr ""
+"<qt>Ni KPilot ni Pilot nemaju postavljeno korisničko ime, iako bi ona <i>"
+"trebalo</i> da bude postavljena. Da li da ih KPilot postavi na podrazumijevanu "
+"vrijednost (<i>%1</i>)?</qt>"
+
+#: kpilot/hotSync.cc:814 kpilot/hotSync.cc:831 kpilot/hotSync.cc:855
+msgid "User Unknown"
+msgstr "Korisnik je nepoznat"
+
+#: kpilot/hotSync.cc:826
+#, fuzzy
+msgid ""
+"<qt>The handheld has a username set (<i>%1</i>) but KPilot does not. Should "
+"KPilot use this username in future?</qt>"
+msgstr ""
+"<qt>Pilot ima postavljeno korisničko ime (<i>%1</i>), ali ga KPilot nema. Da li "
+"da i KPilot koristi ovo korisničko ime ubuduće?"
+
+#: kpilot/hotSync.cc:844
+#, fuzzy
+msgid ""
+"KPilot has a username set (<i>%1</i>) but the handheld does not. Should "
+"KPilot's username be set in the handheld as well?"
+msgstr ""
+"<qt>KPilot ima postavljeno korisničko ime (<i>%1</i>"
+"), ali ga Pilot nema. Da li da se ovo korisničko ime postavi i na Pilot-u?"
+
+#: kpilot/hotSync.cc:848
+msgid ""
+"<br/>(<i>Note:</i> If your handheld has been reset to factory defaults, you "
+"should use <i>Restore</i> instead of a regular HotSync. Click on Cancel to stop "
+"this sync.)"
+msgstr ""
+
+#: kpilot/hotSync.cc:877
+#, fuzzy
+msgid ""
+"<qt>The handheld thinks that the username is %1; however, KPilot says you are "
+"%2.Which of these is the correct name?\n"
+"If you click on Cancel, the sync will proceed, but the usernames will not be "
+"changed.</qt>"
+msgstr ""
+"Ručni računar misli da je ime korisnika %1, međutim KPilot kaže da je to %2. "
+"Koje od ovih imena je ispravno?\n"
+"Ako kliknete na Otkaži, sinhronizacija će se nastaviti, ali korisnička imena "
+"neće biti promenjena."
+
+#: kpilot/hotSync.cc:887
+msgid "User Mismatch"
+msgstr "Neslaganje korisničkih imena"
+
+#: kpilot/hotSync.cc:890
+msgid "Use KPilot Name"
+msgstr "Koristi KPilot-ovo ime"
+
+#: kpilot/hotSync.cc:891
+msgid "Use Handheld Name"
+msgstr "Koristi ime sa ručnog računara"
+
+#: kpilot/hotSync.cc:997
+#, fuzzy
+msgid "Restore directory does not exist."
+msgstr " Port ne postoji."
+
+#: kpilot/hotSync.cc:998 kpilot/hotSync.cc:1013
+msgid "Restore not performed."
+msgstr "Vraćanje nije odrađeno."
+
+#: kpilot/hotSync.cc:1003
+msgid ""
+"<qt>Are you sure you want to completely restore your Pilot from the backup "
+"directory (<i>%1</i>)? This will erase any information you currently have on "
+"your Pilot.</qt>"
+msgstr ""
+"<qt>Želite li zaista kompletno da povratite vašeg Pilot-a iz direktorija u "
+"kojem je rezervna kopija (<i>%1</i>)? Ovim će se obrisati sve informacije koje "
+"se trenutno nalaze na Pilot-u.</qt>"
+
+#: kpilot/hotSync.cc:1008
+msgid "Restore Pilot"
+msgstr "Povrati Pilot-a"
+
+#: kpilot/hotSync.cc:1010
+msgid "Restore <i>not</i> performed."
+msgstr "Vraćanje <i>nije</i> odrađeno."
+
+#: kpilot/hotSync.cc:1012
+#, fuzzy
+msgid "Canceled by user."
+msgstr "Sinhronozacija prekinuta od strane korisnika."
+
+#: kpilot/hotSync.cc:1024 kpilot/hotSync.cc:1094
+msgid "Restoring %1..."
+msgstr "Vraćam %1..."
+
+#: kpilot/hotSync.cc:1044
+msgid "File '%1' cannot be read."
+msgstr ""
+
+#: kpilot/hotSync.cc:1071
+msgid "OK."
+msgstr "U redu."
+
+#: kpilot/hotSync.cc:1085
+#, fuzzy
+msgid "Restore incomplete."
+msgstr "Povrati Pilot-a"
+
+#: kpilot/hotSync.cc:1100
+#, fuzzy
+msgid "Cannot restore file `%1'."
+msgstr "Ne mogu da instaliram datoteka '%1'!"
+
+#: kpilot/kpilot.cc:162
+msgid "Starting the KPilot daemon ..."
+msgstr "Pokrećem KPilot-ovog demona ..."
+
+#: kpilot/kpilot.cc:179
+msgid ""
+"Could not start the KPilot daemon. The system error message was: &quot;%1&quot;"
+msgstr ""
+"Nisam mogao da pokrenem KPilot-ovog demona. Sistemska poruka o grešci je: '%1'"
+
+#: kpilot/kpilot.cc:196
+msgid "Daemon status is `%1'"
+msgstr "Status demona je '%1'"
+
+#: kpilot/kpilot.cc:197
+msgid "not running"
+msgstr ""
+
+#: kpilot/kpilot.cc:214
+msgid "Using character set %1 on the handheld."
+msgstr "Koristi se skup znakova %1 na ručnom računaru."
+
+#: kpilot/kpilot.cc:266 kpilot/kpilot.cc:268
+#, fuzzy
+msgid "To-do Viewer"
+msgstr "Prikazivač zadataka"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_viewers.ui line 74
+#: kpilot/kpilot.cc:270 kpilot/kpilot.cc:272 rc.cpp:1238
+#, no-c-format
+msgid "Address Viewer"
+msgstr "Prikazivač adresa"
+
+#: kpilot/kpilot.cc:274 kpilot/kpilot.cc:276
+msgid "Memo Viewer"
+msgstr "Prikazivač beleški"
+
+#: kpilot/kpilot.cc:283 kpilot/kpilot.cc:285
+msgid "Generic DB Viewer"
+msgstr "Generički prikazivač baza"
+
+#: kpilot/kpilot.cc:360
+#, fuzzy
+msgid "Next sync will be a backup. "
+msgstr "&Normalna sinhronizacija, napravi rezervnu kopiju"
+
+#: kpilot/kpilot.cc:368
+#, fuzzy
+msgid "Next sync will restore the Pilot from backup. "
+msgstr "Povrati Pilot-a iz rezervne kopije"
+
+#: kpilot/kpilot.cc:376
+msgid "Next sync will be a regular HotSync. "
+msgstr ""
+
+#: kpilot/kpilot.cc:384
+#, fuzzy
+msgid "Next sync will be a Full Sync. "
+msgstr "&Normalna sinhronizacija, napravi rezervnu kopiju"
+
+#: kpilot/kpilot.cc:392
+#, fuzzy
+msgid "Next sync will copy Handheld data to PC. "
+msgstr "&Normalna sinhronizacija, napravi rezervnu kopiju"
+
+#: kpilot/kpilot.cc:400
+#, fuzzy
+msgid "Next sync will copy PC data to Handheld. "
+msgstr "&Normalna sinhronizacija, napravi rezervnu kopiju"
+
+#: kpilot/kpilot.cc:428
+#, fuzzy
+msgid "The daemon has exited."
+msgstr "&Zaustavi demona pri izlazu"
+
+#: kpilot/kpilot.cc:429
+msgid "No further HotSyncs are possible."
+msgstr ""
+
+#: kpilot/kpilot.cc:430
+msgid "Restart the daemon to HotSync again."
+msgstr ""
+
+#: kpilot/kpilot.cc:450
+#, fuzzy, c-format
+msgid "Cannot start a Sync now. %1"
+msgstr "Trenutno ne mogu da pokrenem sinhronizaciju. %1"
+
+#: kpilot/kpilot.cc:463
+#, fuzzy
+msgid "Cannot start Sync"
+msgstr "Ne mogu da pokrenem sinhronizaciju"
+
+#: kpilot/kpilot.cc:517
+msgid "Select the kind of HotSync to perform next."
+msgstr ""
+
+#: kpilot/kpilot.cc:518
+msgid ""
+"Select the kind of HotSync to perform next. This applies only to the next "
+"HotSync; to change the default, use the configuration dialog."
+msgstr ""
+
+#: kpilot/kpilot.cc:525
+msgid "&HotSync"
+msgstr "&Vruće sinhronizuj"
+
+#: kpilot/kpilot.cc:528
+#, fuzzy
+msgid "Next HotSync will be normal HotSync."
+msgstr "&Normalna sinhronizacija, napravi rezervnu kopiju"
+
+#: kpilot/kpilot.cc:529
+msgid "Tell the daemon that the next HotSync should be a normal HotSync."
+msgstr ""
+
+#: kpilot/kpilot.cc:533
+#, fuzzy
+msgid "Full&Sync"
+msgstr "Sinhronizuj"
+
+#: kpilot/kpilot.cc:536
+#, fuzzy
+msgid "Next HotSync will be a FullSync."
+msgstr "&Normalna sinhronizacija, napravi rezervnu kopiju"
+
+#: kpilot/kpilot.cc:537
+msgid ""
+"Tell the daemon that the next HotSync should be a FullSync (check data on both "
+"sides)."
+msgstr ""
+
+#: kpilot/kpilot.cc:541
+msgid "&Backup"
+msgstr "&Napravi rezervnu kopiju"
+
+#: kpilot/kpilot.cc:544 kpilot/kpilot.cc:560
+#, fuzzy
+msgid "Next HotSync will be backup."
+msgstr "&Normalna sinhronizacija, napravi rezervnu kopiju"
+
+#: kpilot/kpilot.cc:545
+#, fuzzy
+msgid ""
+"Tell the daemon that the next HotSync should back up the Handheld to the PC."
+msgstr "Sinhronizuje se i od PC-ja kao ručnom računaru i obrnuto"
+
+#: kpilot/kpilot.cc:549
+msgid "&Restore"
+msgstr "&Povrati"
+
+#: kpilot/kpilot.cc:552
+#, fuzzy
+msgid "Next HotSync will be restore."
+msgstr "&Normalna sinhronizacija, napravi rezervnu kopiju"
+
+#: kpilot/kpilot.cc:553
+msgid ""
+"Tell the daemon that the next HotSync should restore the Handheld from data on "
+"the PC."
+msgstr ""
+
+#: kpilot/kpilot.cc:561
+#, fuzzy
+msgid ""
+"Tell the daemon that the next HotSync should copy all data from the Handheld to "
+"the PC, overwriting entries on the PC."
+msgstr "Sinhronizuje se i od PC-ja kao ručnom računaru i obrnuto"
+
+#: kpilot/kpilot.cc:569
+#, fuzzy
+msgid "Next HotSync will copy PC to Handheld."
+msgstr "Sinhronizuj PC prema ručnom računaru"
+
+#: kpilot/kpilot.cc:570
+#, fuzzy
+msgid ""
+"Tell the daemon that the next HotSync should copy all data from the PC to the "
+"Handheld, overwriting entries on the Handheld."
+msgstr "Sinhronizuje se i od PC-ja kao ručnom računaru i obrnuto"
+
+#: kpilot/kpilot.cc:577
+msgid "&List Only"
+msgstr ""
+
+#: kpilot/kpilot.cc:580
+#, fuzzy
+msgid "Next HotSync will list databases."
+msgstr "&Normalna sinhronizacija, napravi rezervnu kopiju"
+
+#: kpilot/kpilot.cc:581
+msgid ""
+"Tell the daemon that the next HotSync should just list the files on the "
+"Handheld and do nothing else."
+msgstr ""
+
+#: kpilot/kpilot.cc:588
+#, fuzzy
+msgid "Rese&t Link"
+msgstr "Resetuj"
+
+#: kpilot/kpilot.cc:591
+msgid "Reset the device connection."
+msgstr ""
+
+#: kpilot/kpilot.cc:592
+msgid "Try to reset the daemon and its connection to the Handheld."
+msgstr ""
+
+#: kpilot/kpilot.cc:597
+msgid "Quit KPilot, (and stop the daemon if configured that way)."
+msgstr ""
+
+#: kpilot/kpilot.cc:613
+#, fuzzy
+msgid "Configuration &Wizard..."
+msgstr "Dijalog za podešavanje provoda"
+
+#: kpilot/kpilot.cc:616
+#, fuzzy
+msgid "Configure KPilot using the configuration wizard."
+msgstr "Ovaj dodatak JPilot-a nema dijalog za podešavanje"
+
+#: kpilot/kpilot.cc:851
+msgid ""
+"The library containing the configuration wizard for KPilot could not be loaded, "
+"and the wizard is not available. Please try to use the regular configuration "
+"dialog."
+msgstr ""
+
+#: kpilot/kpilot.cc:854
+#, fuzzy
+msgid "Wizard Not Available"
+msgstr "Dostupni"
+
+#: kpilot/kpilot.cc:898
+msgid "Changed username to `%1'."
+msgstr ""
+
+#: kpilot/kpilot.cc:927
+msgid ""
+"Cannot run KPilot's configuration wizard right now (KPilot's UI is already "
+"busy)."
+msgstr ""
+
+#: kpilot/kpilot.cc:951
+#, fuzzy
+msgid "Cannot configure KPilot right now (KPilot's UI is already busy)."
+msgstr "Ne mogu da otvorim Pilot-ov port '%1'. "
+
+#: kpilot/kpilot.cc:991
+#, fuzzy
+msgid "Setup the Pilot device, conduits and other parameters"
+msgstr "Podesi Pilot-ski uređaj i ostale parametre"
+
+#: kpilot/kpilot.cc:1015
+msgid "KPilot"
+msgstr "KPilot"
+
+#: kpilot/kpilot.cc:1030 kpilot/kpilot.cc:1032
+#, fuzzy
+msgid "Core and conduits developer"
+msgstr "Programeri provoda"
+
+#: kpilot/kpilot.cc:1034
+msgid "VCal conduit"
+msgstr "VCal provod"
+
+#: kpilot/kpilot.cc:1035
+msgid "Abbrowser conduit"
+msgstr "Abbrowser provod"
+
+#: kpilot/kpilot.cc:1036
+msgid "Expenses conduit"
+msgstr "Expenses provod"
+
+#: kpilot/kpilot.cc:1037
+#, fuzzy
+msgid "Notepad conduit, Bugfixer"
+msgstr "[Provod KNotes-a: "
+
+#: kpilot/kpilot.cc:1041
+msgid "XML GUI"
+msgstr "XML GUI"
+
+#: kpilot/kpilot.cc:1044
+msgid ".ui files"
+msgstr ".ui datoteke"
+
+#: kpilot/kpilot.cc:1046
+msgid "Bugfixer, coolness"
+msgstr "Ispravljač grešaka, kuliranje"
+
+#: kpilot/kpilot.cc:1048
+msgid "VCalconduit state machine, CMake"
+msgstr ""
+
+#: kpilot/fileInstaller.cc:109
+#, fuzzy, c-format
+msgid "Cannot install %1"
+msgstr "Ne mogu da instaliram datoteka '%1'!"
+
+#: kpilot/fileInstaller.cc:110
+msgid ""
+"Only PalmOS database files (like *.pdb and *.prc) can be installed by the file "
+"installer."
+msgstr ""
+
+#: kpilot/main-test.cc:66
+msgid "Path to Pilot device node"
+msgstr "Putanja do čvora Pilot-skog uređaja"
+
+#: kpilot/main-test.cc:69
+#, fuzzy
+msgid "List DBs"
+msgstr "Lista baza (podrazumijevano)"
+
+#: kpilot/main-test.cc:71
+msgid "Backup Pilot to <dest dir>"
+msgstr ""
+
+#: kpilot/main-test.cc:73
+msgid "Restore Pilot from backup"
+msgstr "Povrati Pilot-a iz rezervne kopije"
+
+#: kpilot/main-test.cc:76
+msgid "Run conduit from desktop file <filename>"
+msgstr "Pokreni provod iz datoteke radne površine <ime datoteke>"
+
+#: kpilot/main-test.cc:80
+msgid "Run a specific check (with the device)"
+msgstr ""
+
+#: kpilot/main-test.cc:83
+#, fuzzy
+msgid "Show KPilot configuration information"
+msgstr "Informacije o sinhronizaciji"
+
+#: kpilot/main-test.cc:86
+#, fuzzy
+msgid "Set the debug level"
+msgstr "Postavi nivo otkrivanja grešaka"
+
+#: kpilot/main-test.cc:94
+msgid "*Really* run the conduit, not in test mode."
+msgstr "*Zaista* pokreni provod, a ne u probnom režimu."
+
+#: kpilot/main-test.cc:98
+#, fuzzy
+msgid "Run the conduit in file-test mode."
+msgstr "*Zaista* pokreni provod, a ne u probnom režimu."
+
+#: kpilot/main-test.cc:101
+msgid "Copy Pilot to Desktop."
+msgstr ""
+
+#: kpilot/main-test.cc:104
+msgid "Copy Desktop to Pilot."
+msgstr ""
+
+#: kpilot/main-test.cc:107
+msgid "Repeated perform action - only useful for --list"
+msgstr ""
+
+#: kpilot/main-test.cc:347
+msgid "KPilotTest"
+msgstr "KPilotTest"
+
+#: kpilot/main-test.cc:352
+msgid "KPilot Maintainer"
+msgstr "Održavalac KPilot-a"
+
+#. i18n: file ./conduits/null/setup_base.ui line 68
+#: kpilot/main-test.cc:357 rc.cpp:6 rc.cpp:21 rc.cpp:33 rc.cpp:78 rc.cpp:207
+#: rc.cpp:222 rc.cpp:304 rc.cpp:592 rc.cpp:745 rc.cpp:835 rc.cpp:844
+#: rc.cpp:910
+#, no-c-format
+msgid "General"
+msgstr "Opšte"
+
+#: kpilot/main-test.cc:359
+#, fuzzy
+msgid "Conduit Actions"
+msgstr "Opcije nultog provoda"
+
+#: kpilot/addressWidget.cc:187
+msgid "There are still %1 address editing windows open."
+msgstr "Još uvijek je otvoreno %1 prozora za uređivanje adresa."
+
+#: kpilot/addressWidget.cc:191
+#, c-format
+msgid ""
+"_n: There is still an address editing window open.\n"
+"There are still %n address editing windows open."
+msgstr ""
+"Još uvijek je otvoren %n prozor za uređivanje adresa.\n"
+"Još uvijek su otvorena %n prozora za uređivanje adresa.\n"
+"Još uvijek je otvoreno %n prozora za uređivanje adresa."
+
+#: kpilot/addressWidget.cc:224
+msgid "<qt>Select the category of addresses to display here.</qt>"
+msgstr "<qt>Izaberite kategoriju adresa koje treba da se prikažu ovdje.</qt>"
+
+#: kpilot/addressWidget.cc:237
+msgid ""
+"<qt>This list displays all the addresses in the selected category. Click on one "
+"to display it to the right.</qt>"
+msgstr ""
+"<qt>Ova lista prikazuje sve adrese u selektovanoj kategoriji. Kliknite na neku "
+"od njih da biste je prikazali desno.</qt>"
+
+#: kpilot/addressWidget.cc:241
+msgid "Address info:"
+msgstr "Informacije o adresi:"
+
+#: kpilot/addressWidget.cc:255
+msgid "<qt>You can edit an address when it is selected.</qt>"
+msgstr "<qt>Možete uređivati adresu kada je izabrana.</qt>"
+
+#: kpilot/addressWidget.cc:263
+msgid "<qt>Add a new address to the address book.</qt>"
+msgstr "<qt>Dodaje se nova adresa u adresar.</qt>"
+
+#: kpilot/addressWidget.cc:264
+msgid "<qt><i>Adding is disabled by the 'internal editors' setting.</i></qt>"
+msgstr ""
+
+#: kpilot/addressWidget.cc:274
+msgid "<qt>Delete the selected address from the address book.</qt>"
+msgstr "<qt>Briše se izabrana adresa iz adresara.</qt>"
+
+#: kpilot/addressWidget.cc:277
+msgid ""
+"_: Export addresses to file\n"
+"Export..."
+msgstr ""
+
+#: kpilot/addressWidget.cc:281
+#, fuzzy
+msgid "<qt>Export all addresses in the selected category to CSV format.</qt>"
+msgstr ""
+"<qt>Ova lista prikazuje sve adrese u selektovanoj kategoriji. Kliknite na neku "
+"od njih da biste je prikazali desno.</qt>"
+
+#: kpilot/addressWidget.cc:480
+#, fuzzy
+msgid ""
+"You cannot add addresses to the address book until you have done a HotSync at "
+"least once to retrieve the database layout from your Pilot."
+msgstr ""
+"Ne možete dodavati adrese u adresar dok bar jednom ne uradite vruću "
+"sinhronizaciju da biste dobavili izgled baze podataka iz vašeg Pilot-a."
+
+#: kpilot/addressWidget.cc:483
+#, fuzzy
+msgid "Cannot Add New Address"
+msgstr "Ne mogu da dodam novu adresu"
+
+#: kpilot/addressWidget.cc:677
+msgid "Export All Addresses"
+msgstr ""
+
+#: kpilot/addressWidget.cc:678
+#, c-format
+msgid "Export Address Category %1"
+msgstr ""
+
+#: kpilot/addressWidget.cc:696
+#, fuzzy
+msgid "The file <i>%1</i> exists. Overwrite?"
+msgstr ""
+"<qt>Tekstualni datoteka <em>%1</em> već postoji. Da li da ga prebrišem?</qt>"
+
+#: kpilot/addressWidget.cc:697
+#, fuzzy
+msgid "Overwrite File?"
+msgstr "&Prebriši"
+
+#: kpilot/addressWidget.cc:710
+msgid "The file <i>%1</i> could not be opened for writing."
+msgstr ""
+
+#. i18n: file ./conduits/null/setup_base.ui line 33
+#: rc.cpp:3 rc.cpp:841
+#, no-c-format
+msgid "Null-Conduit Options"
+msgstr "Opcije nultog provoda"
+
+#. i18n: file ./conduits/null/setup_base.ui line 85
+#: rc.cpp:9 rc.cpp:847
+#, fuzzy, no-c-format
+msgid "KPilot was here."
+msgstr "KPilot je bio ovdje!"
+
+#. i18n: file ./conduits/null/setup_base.ui line 88
+#: rc.cpp:12 rc.cpp:850
+#, no-c-format
+msgid "<qt>Enter the message to add to the Sync Log on your Pilot here.</qt>"
+msgstr ""
+"<qt>Unesite ovdje poruku koja treba da se doda dnevniku sinhronizacije na vašem "
+"Pilot-u.</qt>"
+
+#. i18n: file ./conduits/null/setup_base.ui line 96
+#: rc.cpp:15 rc.cpp:853
+#, no-c-format
+msgid "&Log message:"
+msgstr "Poruka za &dnevnik:"
+
+#. i18n: file ./conduits/memofileconduit/setup_base.ui line 33
+#: rc.cpp:18
+#, fuzzy, no-c-format
+msgid "Memofile Conduit Options"
+msgstr "Opcije nultog provoda"
+
+#. i18n: file ./conduits/memofileconduit/setup_base.ui line 96
+#: rc.cpp:24
+#, fuzzy, no-c-format
+msgid "Sync private records:"
+msgstr "Prikaži &privatne slogove"
+
+#. i18n: file ./conduits/memofileconduit/setup_base.ui line 104
+#: rc.cpp:27
+#, fuzzy, no-c-format
+msgid "Memos directory:"
+msgstr "Tekst beleške:"
+
+#. i18n: file ./conduits/memofileconduit/setup_base.ui line 115
+#: rc.cpp:30
+#, no-c-format
+msgid "Select the directory you want to store your PDA's memos in"
+msgstr ""
+
+#. i18n: file ./conduits/sysinfoconduit/sysinfo-setup_dialog.ui line 63
+#: rc.cpp:36 rc.cpp:42
+#, no-c-format
+msgid ""
+"<qt>Enter here, or select by clicking the file picker button, the location and "
+"file name of the output file used to store the handheld's system "
+"information.</qt>"
+msgstr ""
+
+#. i18n: file ./conduits/sysinfoconduit/sysinfo-setup_dialog.ui line 71
+#: rc.cpp:39
+#, no-c-format
+msgid "Output &file:"
+msgstr "Izlazni &datoteka:"
+
+#. i18n: file ./conduits/sysinfoconduit/sysinfo-setup_dialog.ui line 85
+#: rc.cpp:45
+#, no-c-format
+msgid "Type of Output"
+msgstr "Vrsta izlaza"
+
+#. i18n: file ./conduits/sysinfoconduit/sysinfo-setup_dialog.ui line 96
+#: rc.cpp:48
+#, no-c-format
+msgid "&HTML"
+msgstr "&HTML"
+
+#. i18n: file ./conduits/sysinfoconduit/sysinfo-setup_dialog.ui line 102
+#: rc.cpp:51
+#, fuzzy, no-c-format
+msgid ""
+"<qt>Select this option to output the system information data as a HTML "
+"document.</qt>"
+msgstr "<qt>Izaberite 'Nijedna' ako koristite CSV datoteka</qt>"
+
+#. i18n: file ./conduits/sysinfoconduit/sysinfo-setup_dialog.ui line 110
+#: rc.cpp:54
+#, no-c-format
+msgid "Te&xt file"
+msgstr "Te&kstualni datoteka"
+
+#. i18n: file ./conduits/sysinfoconduit/sysinfo-setup_dialog.ui line 113
+#: rc.cpp:57
+#, no-c-format
+msgid ""
+"<qt>Select this option to output the system information data as a text "
+"document.</qt>"
+msgstr ""
+
+#. i18n: file ./conduits/sysinfoconduit/sysinfo-setup_dialog.ui line 124
+#: rc.cpp:60
+#, no-c-format
+msgid ""
+"<qt>Enter here, or select by clicking on the file picker button, the location "
+"of the template to be used if you select the Custom template option.</qt>"
+msgstr ""
+
+#. i18n: file ./conduits/sysinfoconduit/sysinfo-setup_dialog.ui line 132
+#: rc.cpp:63
+#, no-c-format
+msgid "&Custom template:"
+msgstr "&Poseban šablon:"
+
+#. i18n: file ./conduits/sysinfoconduit/sysinfo-setup_dialog.ui line 135
+#: rc.cpp:66
+#, no-c-format
+msgid ""
+"<qt>Select this option to output the system information data as defined by a "
+"custom template. Enter the location of the template in the edit box, or select "
+"it clicking on the file picker button.</qt>"
+msgstr ""
+
+#. i18n: file ./conduits/sysinfoconduit/sysinfo-setup_dialog.ui line 147
+#: rc.cpp:69
+#, fuzzy, no-c-format
+msgid "Parts Included"
+msgstr "Uključeni delovi"
+
+#. i18n: file ./conduits/sysinfoconduit/sysinfo-setup_dialog.ui line 173
+#: rc.cpp:72
+#, no-c-format
+msgid "Output Type"
+msgstr "Vrsta izlaza"
+
+#. i18n: file ./conduits/sysinfoconduit/sysinfo-setup_dialog.ui line 189
+#: rc.cpp:75
+#, no-c-format
+msgid ""
+"<qt>Check on this list the types of information about your system and handheld "
+"you want to display in the output file.</qt>"
+msgstr ""
+
+#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 49
+#: rc.cpp:81
+#, no-c-format
+msgid "Sync"
+msgstr "Sinhronizuj"
+
+#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 52
+#: rc.cpp:84
+#, no-c-format
+msgid "Select how often AvantGo should be synchronised"
+msgstr ""
+
+#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 72
+#: rc.cpp:87
+#, no-c-format
+msgid "&Every sync"
+msgstr "&Svake sinhronizacije"
+
+#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 78
+#: rc.cpp:90
+#, no-c-format
+msgid ""
+"<qt>Select this option to synchronize with the MAL server on every HotSync. To "
+"perform a successful synchronization, you need to have access to the MAL server "
+"during the HotSync.</qt>"
+msgstr ""
+
+#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 86
+#: rc.cpp:93
+#, no-c-format
+msgid "Once per &hour"
+msgstr "Svakog č&asa"
+
+#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 92
+#: rc.cpp:96
+#, no-c-format
+msgid ""
+"<qt>Select this option to synchronize with the MAL server on every HotSync that "
+"is at least one hour after the previous MAL sync. To perform a successful "
+"synchronization, you need to have access to the MAL server during the "
+"HotSync.</qt>"
+msgstr ""
+
+#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 100
+#: rc.cpp:99
+#, no-c-format
+msgid "Once a &day"
+msgstr "Jednom &dnevno"
+
+#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 103
+#: rc.cpp:102
+#, no-c-format
+msgid ""
+"<qt>Select this option to synchronize with the MAL server on every HotSync that "
+"is at least one day after the previous MAL sync. To perform a successful "
+"synchronization, you need to have access to the MAL server during the "
+"HotSync.</qt>"
+msgstr ""
+
+#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 111
+#: rc.cpp:105
+#, no-c-format
+msgid "Once a &week"
+msgstr "Jednom &sedmično"
+
+#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 114
+#: rc.cpp:108
+#, no-c-format
+msgid ""
+"<qt>Select this option to synchronize with the MAL server on every HotSync that "
+"is at least one week after the previous MAL sync. To perform a successful "
+"synchronization, you need to have access to the MAL server during the "
+"HotSync.</qt>"
+msgstr ""
+
+#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 122
+#: rc.cpp:111
+#, no-c-format
+msgid "Once a &month"
+msgstr "Jednom &mesečno"
+
+#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 125
+#: rc.cpp:114
+#, no-c-format
+msgid ""
+"<qt>Select this option to synchronize with the MAL server on every HotSync that "
+"is at least one month after the previous MAL sync. To perform a successful "
+"synchronization, you need to have access to the MAL server during the "
+"HotSync.</qt>"
+msgstr ""
+
+#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 154
+#: rc.cpp:117
+#, no-c-format
+msgid "Proxy"
+msgstr "Proksi"
+
+#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 168
+#: rc.cpp:120
+#, fuzzy, no-c-format
+msgid "Proxy Type"
+msgstr "Proksi"
+
+#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 185
+#: rc.cpp:123
+#, no-c-format
+msgid "&No proxy"
+msgstr "&Bez proksija"
+
+#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 191
+#: rc.cpp:126
+#, no-c-format
+msgid ""
+"<qt>Select this option if you do not want KPilot to use a proxy server. Use "
+"this option if you connect to the internet directly.</qt>"
+msgstr ""
+
+#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 199
+#: rc.cpp:129
+#, no-c-format
+msgid "&HTTP proxy"
+msgstr "HTTP &proksi"
+
+#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 202
+#: rc.cpp:132
+#, no-c-format
+msgid "<qt>Select this option if you want KPilot to use a HTTP proxy.</qt>"
+msgstr ""
+
+#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 210
+#: rc.cpp:135
+#, no-c-format
+msgid "&SOCKS proxy"
+msgstr "SOCKS p&roksi"
+
+#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 213
+#: rc.cpp:138
+#, fuzzy, no-c-format
+msgid "<qt>Select this option if you want KPilot to use a SOCKS proxy.</qt>"
+msgstr "<qt>Izaberite 'Nijedna' ako koristite CSV datoteka</qt>"
+
+#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 226
+#: rc.cpp:141
+#, no-c-format
+msgid "Server Information"
+msgstr "Informacije o serveru"
+
+#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 260
+#: rc.cpp:144 rc.cpp:195
+#, no-c-format
+msgid "Custom &port:"
+msgstr "Poseban &port:"
+
+#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 263
+#: rc.cpp:147
+#, no-c-format
+msgid "Check this box to use a non-standard proxy port."
+msgstr ""
+
+#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 271
+#: rc.cpp:150
+#, no-c-format
+msgid "Ser&ver name:"
+msgstr "&Ime servera:"
+
+#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 277
+#: rc.cpp:153 rc.cpp:156
+#, no-c-format
+msgid ""
+"<qt>If you selected HTTP or SOCKS proxy, type the address of the proxy server "
+"to use here, in the form <i>foo.bar.com</i> (not <i>http://foo.bar.com</i> "
+"or <i>http://foo.bar.com:8080</i>).</qt>"
+msgstr ""
+
+#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 305
+#: rc.cpp:159
+#, fuzzy, no-c-format
+msgid ""
+"<qt>Enter the port you want KPilot to use when connecting to your proxy server "
+"here.</qt>"
+msgstr ""
+"<qt>Unesite ovdje poruku koja treba da se doda dnevniku sinhronizacije na vašem "
+"Pilot-u.</qt>"
+
+#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 316
+#: rc.cpp:162
+#, no-c-format
+msgid ""
+"<qt>If your proxy requires authentication, enter your password here.</qt>"
+msgstr ""
+
+#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 324
+#: rc.cpp:165 rc.cpp:174
+#, no-c-format
+msgid ""
+"<qt>If your proxy requires authentication, enter your username here.</qt>"
+msgstr ""
+
+#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 332
+#: rc.cpp:168 rc.cpp:198
+#, no-c-format
+msgid "&Password:"
+msgstr "&Lozinka:"
+
+#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 343
+#: rc.cpp:171 rc.cpp:201
+#, no-c-format
+msgid "&User name:"
+msgstr "&Korisničko ime:"
+
+#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 371
+#: rc.cpp:177 rc.cpp:183
+#, no-c-format
+msgid ""
+"<qt>Enter a list of MAL servers that do not need the use of a proxy here, "
+"separated with commas, e.g: "
+"<br><i>localhost,127.0.0.1,.lan</i><qt>"
+msgstr ""
+
+#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 379
+#: rc.cpp:180
+#, fuzzy, no-c-format
+msgid "N&o proxy for:"
+msgstr "&Bez proksija"
+
+#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 414
+#: rc.cpp:186
+#, no-c-format
+msgid "MAL Server"
+msgstr "MAL server"
+
+#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 434
+#: rc.cpp:189
+#, no-c-format
+msgid "MAL Server Information"
+msgstr "Informacije o MAL serveru"
+
+#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 451
+#: rc.cpp:192
+#, no-c-format
+msgid "&MAL server name:"
+msgstr "Ime MAL &servera:"
+
+#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 574
+#: rc.cpp:204
+#, fuzzy, no-c-format
+msgid ""
+"<qt>There is currently <b>no way to set server parameters on the desktop</b>"
+"; you need to use the <i>MobileLink</i> or <i>AGConnect</i> "
+"application on the handheld device. </qt>"
+msgstr ""
+"<qt>Trenutno <b>nema načina da se postave parametri servera na stonom "
+"računaru</b>; treba da koristite program <i>MobileLink</i> "
+"na ručnom računaru. </qt>"
+
+#. i18n: file ./conduits/knotes/setup_base.ui line 45
+#: rc.cpp:210
+#, no-c-format
+msgid "Delete KNote when Pilot memo is deleted"
+msgstr "Obriši KNote kada se obriše Pilot-ova beleška"
+
+#. i18n: file ./conduits/knotes/setup_base.ui line 51
+#: rc.cpp:213
+#, no-c-format
+msgid ""
+"<qt>Check this box if you wish to delete notes from KNotes automatically when "
+"the corresponding Pilot memo is deleted. Use this option with care, as the "
+"notes you want to keep in the handheld and in the desktop are not necessarily "
+"the same.</qt>"
+msgstr ""
+
+#. i18n: file ./conduits/knotes/setup_base.ui line 59
+#: rc.cpp:216
+#, no-c-format
+msgid "Suppress delete-confirmation in KNotes"
+msgstr ""
+
+#. i18n: file ./conduits/knotes/setup_base.ui line 62
+#: rc.cpp:219
+#, no-c-format
+msgid ""
+"<qt>Check this box if you wish to delete notes from KNotes, without "
+"confirmation, when the corresponding Pilot memo is deleted. Use this option "
+"only if you want to keep the same notes in the handheld and in the PC.</qt>"
+msgstr ""
+
+#. i18n: file ./conduits/timeconduit/time-setup_dialog.ui line 63
+#: rc.cpp:225
+#, no-c-format
+msgid "Direction"
+msgstr "Smer"
+
+#. i18n: file ./conduits/timeconduit/time-setup_dialog.ui line 80
+#: rc.cpp:228
+#, no-c-format
+msgid "Set the &handheld time from the time on the PC"
+msgstr "Postavi vrijeme na &ručnom računaru prema vremenu na PC-ju"
+
+#. i18n: file ./conduits/timeconduit/time-setup_dialog.ui line 86
+#: rc.cpp:231
+#, no-c-format
+msgid ""
+"<qt>Select this option to synchronize the handheld time with the PC time, by "
+"using the PC time on both.</qt>"
+msgstr ""
+
+#. i18n: file ./conduits/timeconduit/time-setup_dialog.ui line 97
+#: rc.cpp:234
+#, no-c-format
+msgid "Set the &PC time from the time on the handheld"
+msgstr "Postavi vrijeme na PC-ju &prema vrijemenu na ručnom računaru"
+
+#. i18n: file ./conduits/timeconduit/time-setup_dialog.ui line 100
+#: rc.cpp:237
+#, no-c-format
+msgid ""
+"<qt>Select this option to synchronize the handheld time with the PC time, by "
+"using the handheld time on both.</qt>"
+msgstr ""
+
+#. i18n: file ./conduits/timeconduit/time-setup_dialog.ui line 110
+#: rc.cpp:240
+#, no-c-format
+msgid ""
+"<qt>PalmOS Version 3.25 and 3.3 do not support setting the system time, so this "
+"conduit will be skipped for handhelds that run either of these operating "
+"systems.</qt>"
+msgstr ""
+"<qt>PalmOS verzije 3.25 i 3.3 ne podržava postavljanje sistemskog vremena, tako "
+"da će ovaj provod biti preskočen za ručne računare koji koriste jednu od "
+"navedenih verzija operativnog sistema.</qt>"
+
+#. i18n: file ./conduits/abbrowserconduit/KPilotCustomFieldEditor.ui line 18
+#: rc.cpp:243 rc.cpp:246
+#, fuzzy, no-c-format
+msgid "KPilot Custom Fields"
+msgstr "Posebna polja"
+
+#. i18n: file ./conduits/abbrowserconduit/KPilotCustomFieldEditor.ui line 35
+#: rc.cpp:249
+#, no-c-format
+msgid ""
+"On your handheld, each address also provides four custom fields for your "
+"personal use. KPilot can sync these either to birthdate, URL, IM address, or "
+"just store them as a custom field on your PC with no special meaning. In the "
+"last case, you can change the values here. Note, however, that for all other "
+"settings the values entered here will have no effect."
+msgstr ""
+
+#. i18n: file ./conduits/abbrowserconduit/KPilotCustomFieldEditor.ui line 46
+#: rc.cpp:252
+#, fuzzy, no-c-format
+msgid "Custom &3:"
+msgstr "Posebno 3:"
+
+#. i18n: file ./conduits/abbrowserconduit/KPilotCustomFieldEditor.ui line 52
+#: rc.cpp:255 rc.cpp:264
+#, no-c-format
+msgid ""
+"<qt>Edit or enter the value of the third custom field here. Using KPilot, you "
+"can synchronize these values with the handheld's Address application custom "
+"fields.</qt>"
+msgstr ""
+
+#. i18n: file ./conduits/abbrowserconduit/KPilotCustomFieldEditor.ui line 60
+#: rc.cpp:258
+#, fuzzy, no-c-format
+msgid "Custom &4:"
+msgstr "Posebno 4:"
+
+#. i18n: file ./conduits/abbrowserconduit/KPilotCustomFieldEditor.ui line 66
+#: rc.cpp:261 rc.cpp:270
+#, no-c-format
+msgid ""
+"<qt>Edit or enter the value of the fourth custom field here. Using KPilot, you "
+"can synchronize these values with the handheld's Address application custom "
+"fields.</qt>"
+msgstr ""
+
+#. i18n: file ./conduits/abbrowserconduit/KPilotCustomFieldEditor.ui line 82
+#: rc.cpp:267 rc.cpp:276
+#, no-c-format
+msgid ""
+"<qt>Edit or enter the value of the second custom field here. Using KPilot, you "
+"can synchronize these values with the handheld's Address application custom "
+"fields.</qt>"
+msgstr ""
+
+#. i18n: file ./conduits/abbrowserconduit/KPilotCustomFieldEditor.ui line 98
+#: rc.cpp:273
+#, fuzzy, no-c-format
+msgid "Custom &2:"
+msgstr "Posebno 2:"
+
+#. i18n: file ./conduits/abbrowserconduit/KPilotCustomFieldEditor.ui line 112
+#: rc.cpp:279
+#, fuzzy, no-c-format
+msgid "Custom &1:"
+msgstr "Posebno 1:"
+
+#. i18n: file ./conduits/abbrowserconduit/KPilotCustomFieldEditor.ui line 118
+#: rc.cpp:282 rc.cpp:285
+#, no-c-format
+msgid ""
+"<qt>Edit or enter the value of the first custom field here. Using KPilot, you "
+"can synchronize these values with the handheld's Address application custom "
+"fields.</qt>"
+msgstr ""
+
+#. i18n: file ./conduits/abbrowserconduit/KPilotCustomFieldEditor.ui line 142
+#: rc.cpp:288
+#, no-c-format
+msgid ""
+"If you let KPilot sync the handheld's custom fields as custom fields on the PC, "
+"you can change the values here. Note, however, that for all other settings the "
+"values entered here will have no effect."
+msgstr ""
+
+#. i18n: file ./conduits/abbrowserconduit/KPilotCustomFieldEditor.ui line 158
+#: rc.cpp:291
+#, no-c-format
+msgid "KPilot's Private (meta-sync) Settings"
+msgstr ""
+
+#. i18n: file ./conduits/abbrowserconduit/KPilotCustomFieldEditor.ui line 169
+#: rc.cpp:294
+#, fuzzy, no-c-format
+msgid "Record&ID:"
+msgstr "Id. sloga"
+
+#. i18n: file ./conduits/abbrowserconduit/KPilotCustomFieldEditor.ui line 180
+#: rc.cpp:297
+#, fuzzy, no-c-format
+msgid "Sync &flag:"
+msgstr "Sinhronizuj s&ve"
+
+#. i18n: file ./conduits/abbrowserconduit/KPilotCustomFieldEditor.ui line 226
+#: rc.cpp:300
+#, no-c-format
+msgid ""
+"These values indicate the state of the record for KPilot, and connect an entry "
+"on the handheld with an entry on the PC.\n"
+"Do NOT change these values: doing so will almost certainly result in data loss "
+"when you next do a sync."
+msgstr ""
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 66
+#: rc.cpp:307 rc.cpp:913
+#, no-c-format
+msgid "Sync Destination"
+msgstr "Smer sinhronizacije"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 77
+#: rc.cpp:310
+#, no-c-format
+msgid "&Standard addressbook"
+msgstr "&Standardni adresar"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 80
+#: rc.cpp:313
+#, fuzzy, no-c-format
+msgid ""
+"<qt>Select this option to synchronize with TDE's standard addressbook (i.e. the "
+"addressbook that you edit in KAddressBook, and which you use in KMail)</qt>"
+msgstr ""
+"<qt>Sinhronizuje se sa TDE-ovim standardnim adresarom (tj. adresarom koji "
+"uređujete u KAddressBook-u, i koji se koristi u KMail-u)</qt>"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 91
+#: rc.cpp:316
+#, no-c-format
+msgid "vCard &file:"
+msgstr "VCard &datoteka:"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 94
+#: rc.cpp:319
+#, no-c-format
+msgid ""
+"<qt>Select this option to use a specific address book file, instead of the "
+"standard TDE address book. This file must be in the vCard format (.vcf). Type "
+"the location of this file in the edit box or select it clicking the file picker "
+"button.</qt>"
+msgstr ""
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 113
+#: rc.cpp:322
+#, no-c-format
+msgid ""
+"<qt>Enter the vCard file name here or select it by clicking the file picker "
+"button. vCard is a standard format for exchanging contact information. </qt>"
+msgstr ""
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 123
+#: rc.cpp:325
+#, no-c-format
+msgid "Store &archived records in the TDE addressbook"
+msgstr "Skladišti &arhivirane slogove u TDE-ov adresar"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 126
+#: rc.cpp:328
+#, no-c-format
+msgid ""
+"<qt>If you delete an address on your handheld, you can determine if it should "
+"be archived on the PC. If you check that and this checkbox, the address will be "
+"added to your addressbook, but no longer synchronized with the handheld.</qt>"
+msgstr ""
+"<qt>Ako obrišete adresu na vašem ručnom računaru, možete odrediti da li će ta "
+"adresa biti arhivirana na PC-ju. Ako uključite ovo, adresa će biti dodata vašem "
+"adresaru, ali neće više biti sinhronizovana sa ručnim računarom.</qt>"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 136
+#: rc.cpp:331 rc.cpp:703 rc.cpp:938
+#, no-c-format
+msgid "Conflicts"
+msgstr "Konflikti"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 166
+#: rc.cpp:337 rc.cpp:941 rc.cpp:1049
+#, no-c-format
+msgid "Conflict &resolution:"
+msgstr "&Razrešenje konflikata:"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 172
+#: rc.cpp:340 rc.cpp:364
+#, fuzzy, no-c-format
+msgid ""
+"<qt>Select in this list how conflicting entries (entries which were edited both "
+"on your handheld and on the PC) are resolved. Possibly values are \"Use "
+"KPilot's Global Setting\" to use the settings defined in KPilot HotSync "
+"configuration, \"Ask User\" to let you decide case by case, \"Do Nothing\" to "
+"allow the entries to be different, \"PC overrides\", \"Handheld overrides\", "
+"\"Use values from last sync\" and \"Use both entries\" to create a new entry on "
+"both the PC and handheld.</qt>"
+msgstr ""
+"<qt>Ovdje možete izabrati kako će biti razrešene konfliktne stavke (stavke koje "
+"su bile uređivane i na ručnom računaru i na PC-ju).</qt>"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 178
+#: rc.cpp:343 rc.cpp:944
+#, no-c-format
+msgid "Use KPilot's Global Setting"
+msgstr "Koristi KPilot-ove globalne postavke"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 183
+#: rc.cpp:346 rc.cpp:947 rc.cpp:1028
+#, no-c-format
+msgid "Ask User"
+msgstr "Pitaj korisnika"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 188
+#: rc.cpp:349 rc.cpp:950 rc.cpp:1031
+#, no-c-format
+msgid "Do Nothing"
+msgstr "Ne radi ništa"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 193
+#: rc.cpp:352 rc.cpp:953 rc.cpp:1034
+#, no-c-format
+msgid "Handheld Overrides"
+msgstr "Prednost ima ručni računar"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 198
+#: rc.cpp:355 rc.cpp:956 rc.cpp:1037
+#, no-c-format
+msgid "PC Overrides"
+msgstr "Prednost ima PC"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 203
+#: rc.cpp:358 rc.cpp:959 rc.cpp:1040
+#, no-c-format
+msgid "Values From Last Sync (if possible)"
+msgstr "Prema vrednostima iz posljednje sinhronizacije (ako je moguće)"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 208
+#: rc.cpp:361 rc.cpp:962 rc.cpp:1043
+#, no-c-format
+msgid "Use Both Entries"
+msgstr "Koristi obje stavke"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 226
+#: rc.cpp:367
+#, fuzzy, no-c-format
+msgid ""
+"<p>Select the default action if an event was modified on both sides here. </p>"
+msgstr ""
+"<p>Ovdje možete izabrati podrazumijevanu akciju ako je događaj izmenjen na obje "
+"strane. </p>"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 258
+#: rc.cpp:370
+#, no-c-format
+msgid "Fields"
+msgstr "Polja"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 275
+#: rc.cpp:373
+#, no-c-format
+msgid "Handheld other phone:"
+msgstr "Drugi telefon na ručnom računaru:"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 278
+#: rc.cpp:376 rc.cpp:403
+#, fuzzy, no-c-format
+msgid ""
+"<qt>Select which KAddressBook field should be used to store the Pilot's "
+"&quot;Other&quot; phone here.</qt>"
+msgstr ""
+"<qt>Izaberite koje bi polje u KAddressBook-u trebalo da se koristi za čuvanje "
+"Pilot-ovog 'drugog' telefona.</qt>"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 284
+#: rc.cpp:379
+#, no-c-format
+msgid "Other Phone"
+msgstr "Drugi telefon"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 289
+#: rc.cpp:382
+#, no-c-format
+msgid "Assistant"
+msgstr "Asistent"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 294
+#: rc.cpp:385 rc.cpp:430
+#, no-c-format
+msgid "Business Fax"
+msgstr "Poslovni faks"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 299
+#: rc.cpp:388
+#, no-c-format
+msgid "Car Phone"
+msgstr "Telefon u kolima"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 304
+#: rc.cpp:391
+#, no-c-format
+msgid "Email 2"
+msgstr "E-adresa 2"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 309
+#: rc.cpp:394 rc.cpp:427
+#, no-c-format
+msgid "Home Fax"
+msgstr "Kućni faks"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 314
+#: rc.cpp:397
+#, no-c-format
+msgid "Telex"
+msgstr "Teleks"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 319
+#: rc.cpp:400
+#, no-c-format
+msgid "TTY/TTD Phone"
+msgstr "TTY/TTD telefon"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 342
+#: rc.cpp:406
+#, no-c-format
+msgid "Handheld street address:"
+msgstr "Ulica i broj na ručnom računaru:"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 345
+#: rc.cpp:409 rc.cpp:418
+#, fuzzy, no-c-format
+msgid ""
+"<qt>Select which KAddressBook field should be used to store the Pilot's Street "
+"Address here.</qt>"
+msgstr ""
+"<qt>Izaberite koje bi polje u KAddressBook-u trebalo da se koristi za čuvanje "
+"Pilot-ove ulice i broja.</qt>"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 351
+#: rc.cpp:412
+#, no-c-format
+msgid "Preferred, then Home Address"
+msgstr "Poželjna, onda kućna adresa"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 356
+#: rc.cpp:415
+#, no-c-format
+msgid "Preferred, then Business Address"
+msgstr "Poželjna, onda poslovna adresa"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 371
+#: rc.cpp:421
+#, no-c-format
+msgid "Handheld fax:"
+msgstr "Faks na ručnom računaru:"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 374
+#: rc.cpp:424 rc.cpp:433
+#, fuzzy, no-c-format
+msgid ""
+"<qt>Select which KAddressBook field should be used to store the Fax number from "
+"the Pilot here.</qt>"
+msgstr ""
+"<qt>Izaberite koje bi polje u KAddressBook-u trebalo da se koristi za čuvanje "
+"broja faksa sa Pilot-a.</qt>"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 419
+#: rc.cpp:436
+#, no-c-format
+msgid "Custom Fields"
+msgstr "Posebna polja"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 438
+#: rc.cpp:439
+#, no-c-format
+msgid "Handheld custom field 1:"
+msgstr "Posebno polje na ručnom računaru 1:"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 441
+#: rc.cpp:442 rc.cpp:475
+#, fuzzy, no-c-format
+msgid ""
+"<qt>Select the field from this list that represents best the meaning given by "
+"your use of the first custom field on your handheld.</qt>"
+msgstr "<qt>Izaberite značenje prvog posebnog polja na ručnom računaru</qt>"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 449
+#: rc.cpp:445
+#, no-c-format
+msgid "Handheld custom field 2:"
+msgstr "Posebno polje na ručnom računaru 2:"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 452
+#: rc.cpp:448 rc.cpp:490
+#, fuzzy, no-c-format
+msgid ""
+"<qt>Select the field from this list that represents best the meaning given by "
+"your use of the second custom field on your handheld.</qt>"
+msgstr "<qt>Izaberite značenje drugog posebnog polja na ručnom računaru</qt>"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 460
+#: rc.cpp:451
+#, no-c-format
+msgid "Handheld custom field 3:"
+msgstr "Posebno polje na ručnom računaru 3:"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 463
+#: rc.cpp:454 rc.cpp:505
+#, fuzzy, no-c-format
+msgid ""
+"<qt>Select the field from this list that represents best the meaning given by "
+"your use of the third custom field on your handheld.</qt>"
+msgstr "<qt>Izaberite značenje trećeg posebnog polja na ručnom računaru</qt>"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 471
+#: rc.cpp:457
+#, no-c-format
+msgid "Handheld custom field 4:"
+msgstr "Posebno polje na ručnom računaru 4:"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 474
+#: rc.cpp:460 rc.cpp:520
+#, fuzzy, no-c-format
+msgid ""
+"<qt>Select the field from this list that represents best the meaning given by "
+"your use of the fourth custom field on your handheld.</qt>"
+msgstr "<qt>Izaberite značenje četvrtog posebnog polja na ručnom računaru</qt>"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 480
+#: rc.cpp:463 rc.cpp:478 rc.cpp:493 rc.cpp:508
+#, no-c-format
+msgid "Store as Custom Field"
+msgstr "Čuvaj kao posebno polje"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 485
+#: rc.cpp:466 rc.cpp:481 rc.cpp:496 rc.cpp:511
+#, no-c-format
+msgid "Birthdate"
+msgstr "Datum rođenja"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 490
+#: rc.cpp:469 rc.cpp:484 rc.cpp:499 rc.cpp:514
+#, no-c-format
+msgid "URL"
+msgstr "URL"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 495
+#: rc.cpp:472
+#, no-c-format
+msgid "IM Address (ICQ, MS, ...)"
+msgstr "IM adresa (ICQ, MS, ...)"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 531
+#: rc.cpp:487 rc.cpp:502 rc.cpp:517
+#, no-c-format
+msgid "IM Address (ICQ, MSN, ...)"
+msgstr "IM adresa (ICQ, MSN, ...)"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 640
+#: rc.cpp:523
+#, no-c-format
+msgid "Date &format:"
+msgstr "Format &datuma:"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 646
+#: rc.cpp:526 rc.cpp:550
+#, fuzzy, no-c-format
+msgid ""
+"<qt>Select the birthdate format here, if you selected \"birthdate\" for any of "
+"the custom fields above. Possible placeholders are:"
+"<br> %d for the day, %m for the month, %y for the two-digit year, %Y for the "
+"four-digit year. For  example, %d.%m.%Y would generate a date like 27.3.1952, "
+"while %m/%d/%y would write the same date as 03/27/52. </qt>"
+msgstr ""
+"<qt>Izaberite format datuma ako ste izabrali 'datum rođenja' za bilo koje od "
+"posebnih polja gore. Moguća polja su:"
+"<br>\n"
+"%d za dan, %m za mesec, %y za godinu sa dve cifre i %Y za godinu za četiri "
+"cifre. Na primjer, %d.%m.%Y bi napravilo datum kao 27.3.1952, dok bi %m/%d/%y "
+"rezultovalo sa 03/27/52.\n"
+"</qt>"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 652
+#: rc.cpp:529
+#, no-c-format
+msgid "Locale Settings"
+msgstr "Postavke lokala"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 657
+#: rc.cpp:532
+#, no-c-format
+msgid "%d.%m.%Y"
+msgstr "%d.%m.%Y"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 662
+#: rc.cpp:535
+#, no-c-format
+msgid "%d.%m.%y"
+msgstr "%d.%m.%y"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 667
+#: rc.cpp:538
+#, no-c-format
+msgid "%d/%m/%Y"
+msgstr "%d/%m/%Y"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 672
+#: rc.cpp:541
+#, no-c-format
+msgid "%d/%m/%y"
+msgstr "%d/%m/%y"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 677
+#: rc.cpp:544
+#, no-c-format
+msgid "%m/%d/%Y"
+msgstr "%m/%d/%Y"
+
+#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 682
+#: rc.cpp:547
+#, no-c-format
+msgid "%m/%d/%y"
+msgstr "%m/%d/%y"
+
+#. i18n: file ./conduits/abbrowserconduit/resolutionDialog_base.ui line 16
+#: rc.cpp:553
+#, no-c-format
+msgid "widget2"
+msgstr ""
+
+#. i18n: file ./conduits/abbrowserconduit/resolutionDialog_base.ui line 27
+#: rc.cpp:556
+#, no-c-format
+msgid ""
+"The following record was edited both on the handheld and on the PC. Please "
+"choose which values shall be synced:"
+msgstr ""
+"Sljedeći slog je uređivan i na ručnom računaru i na PC-ju. Izaberite koje će "
+"vrijednosti biti sinhronizovane:"
+
+#. i18n: file ./conduits/abbrowserconduit/resolutionDialog_base.ui line 36
+#: rc.cpp:559
+#, no-c-format
+msgid "Field"
+msgstr "Polje"
+
+#. i18n: file ./conduits/abbrowserconduit/resolutionDialog_base.ui line 55
+#: rc.cpp:562
+#, no-c-format
+msgid ""
+"<qt>Use this list to resolve, field by field, the conflicts created when a "
+"record was edited both on the handheld and on the PC. For each record, the "
+"different values from the last sync, the handheld and PC are displayed for each "
+"field, allowing you to choose the desired value.</qt>"
+msgstr ""
+
+#. i18n: file ./conduits/abbrowserconduit/resolutionDialog_base.ui line 63
+#: rc.cpp:565
+#, no-c-format
+msgid ""
+"Line breaks in any of the entries are denoted by a \" | \" (without the "
+"quotes)."
+msgstr ""
+"Prelomi linija u bilo kojoj od ovih stavki predstavljene su sa '|' (bez "
+"navodnika)."
+
+#. i18n: file ./conduits/abbrowserconduit/resolutionDialog_base.ui line 85
+#: rc.cpp:568
+#, no-c-format
+msgid "&Keep Both"
+msgstr "&Zadrži oba"
+
+#. i18n: file ./conduits/abbrowserconduit/resolutionDialog_base.ui line 88
+#: rc.cpp:571
+#, no-c-format
+msgid ""
+"<qt>Click this button to use both values, resulting in the duplication of the "
+"record.</qt>"
+msgstr ""
+
+#. i18n: file ./conduits/abbrowserconduit/resolutionDialog_base.ui line 96
+#: rc.cpp:574
+#, no-c-format
+msgid "&PC Values"
+msgstr "Vrijednosti &sa PC-ja"
+
+#. i18n: file ./conduits/abbrowserconduit/resolutionDialog_base.ui line 99
+#: rc.cpp:577
+#, no-c-format
+msgid ""
+"<qt>Click this button to use the PC values for synchronizing all conflicting "
+"fields in this record.</qt>"
+msgstr ""
+
+#. i18n: file ./conduits/abbrowserconduit/resolutionDialog_base.ui line 107
+#: rc.cpp:580
+#, no-c-format
+msgid "&Last Sync Values"
+msgstr "Vrijednosti iz &posljednje sinhronizacije"
+
+#. i18n: file ./conduits/abbrowserconduit/resolutionDialog_base.ui line 110
+#: rc.cpp:583
+#, no-c-format
+msgid ""
+"<qt>Click this button to use the last sync values (old values) for "
+"synchronizing all conflicting fields in this record.</qt>"
+msgstr ""
+
+#. i18n: file ./conduits/abbrowserconduit/resolutionDialog_base.ui line 118
+#: rc.cpp:586
+#, no-c-format
+msgid "&Handheld Values"
+msgstr "Vrijednosti sa &ručnog računara"
+
+#. i18n: file ./conduits/abbrowserconduit/resolutionDialog_base.ui line 121
+#: rc.cpp:589
+#, no-c-format
+msgid ""
+"<qt>Click this button to use the handheld values for synchronizing all "
+"conflicting fields in this record.</qt>"
+msgstr ""
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 54
+#: rc.cpp:595
+#, no-c-format
+msgid "&Text files:"
+msgstr "&Tekstualni datoteke:"
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 60
+#: rc.cpp:598 rc.cpp:607
+#, no-c-format
+msgid ""
+"<qt>Enter here, or select clicking the file picker button, the name and "
+"location of the folder used to find and synchronize text files. All files with "
+"extension .txt located in this folder will be synced to Palm DOC databases in "
+"your handheld.</qt>"
+msgstr ""
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 68
+#: rc.cpp:601
+#, no-c-format
+msgid "Local co&py:"
+msgstr "Lokalna ko&pija:"
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 74
+#: rc.cpp:604
+#, no-c-format
+msgid ""
+"<qt>Check this box if you want to save a copy of the Palm DOC databases (.pdb "
+"files) on your PC.</qt>"
+msgstr ""
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 90
+#: rc.cpp:610
+#, no-c-format
+msgid "Synchronization Mode"
+msgstr "Režim sinhronizacije"
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 107
+#: rc.cpp:613
+#, no-c-format
+msgid "Sync only P&C to PDA"
+msgstr "Sinhronizuj &samo od PC-ja ka PDA-u"
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 113
+#: rc.cpp:616
+#, no-c-format
+msgid ""
+"<qt>Select this option to synchronize texts changed in your PC to Palm DOC "
+"databases in your handheld. Palm DOC databases modified in the handheld will "
+"not be converted to text files, but texts changed in the PC will be converted "
+"to the Palm DOC databases.</qt>"
+msgstr ""
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 121
+#: rc.cpp:619
+#, no-c-format
+msgid "Sync only P&DA to PC"
+msgstr "Sinhronizuj s&amo od PDA-a ka PC-ju"
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 124
+#: rc.cpp:622
+#, no-c-format
+msgid ""
+"<qt>Select this option to synchronize the changes made to Palm DOC databases in "
+"your handheld to the PC text files. Palm DOC databases modified in the handheld "
+"will be converted to text files, but texts changed in the PC will not be "
+"converted to the Palm DOC databases.</qt>"
+msgstr ""
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 132
+#: rc.cpp:625
+#, no-c-format
+msgid "Sync &all"
+msgstr "Sinhronizuj s&ve"
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 141
+#: rc.cpp:628
+#, no-c-format
+msgid ""
+"<qt>Select this option to synchronize the file texts in your PC to Palm DOC "
+"databases in your handheld. Palm DOC databases modified in the handheld will be "
+"converted to text files, and texts changed in the PC will be converted to the "
+"Palm DOC databases, keeping both versions in sync.</qt>"
+msgstr ""
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 168
+#: rc.cpp:631
+#, fuzzy, no-c-format
+msgid ""
+"<qt>Enter here, or select clicking the file picker button, the name and "
+"location of the folder where copies of the handheld databases are kept (.pdb "
+"files). Local copies are only made if the box is checked as well.</qt>"
+msgstr ""
+"Unesite ime direktorija u kojem se čuvaju kopije baza podataka sa ručnog "
+"računara. Lokalne kopije se prave samo ako je i kućica popunjena."
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 178
+#: rc.cpp:634 rc.cpp:778
+#, no-c-format
+msgid "PC -> Handheld"
+msgstr "PC -> ručni računar"
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 189
+#: rc.cpp:637 rc.cpp:793
+#, no-c-format
+msgid "&Compress"
+msgstr "&Kompresuj"
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 195
+#: rc.cpp:640 rc.cpp:796
+#, no-c-format
+msgid ""
+"Check this box, if the text should be compressed on the handheld to save "
+"memory. Most doc reader on the handheld support compressed texts."
+msgstr ""
+"Popunite ovu kućicu ako želite da se tekst komresuje na ručnom računaru da bi "
+"se uštedela memorija. Većina DOC čitača na ručnim računarima podržava "
+"kompresovane tekstove."
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 198
+#: rc.cpp:643
+#, fuzzy, no-c-format
+msgid ""
+"<qt>The Palm DOC format supports compressing the text to save memory. Check "
+"this box to enable text compression, so the resulting Palm DOC database will "
+"consume about 50% less memory than in uncompressed state. Almost all DOC "
+"readers on the Palm support compressed texts.</qt>"
+msgstr ""
+"PalmDOC format podržava kompresovanje teksta da bi se uštedela memorija. Ako "
+"popunite ovu kućicu, tekst će zauzimati oko 50% manje memorije u odnosu na "
+"nekompresovano stanje. Skoro svi DOC čitači podržavaju ovako kompresovane "
+"tekstove."
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 206
+#: rc.cpp:646 rc.cpp:802
+#, no-c-format
+msgid "Convert &bookmarks"
+msgstr "Konvertuj &markere"
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 212
+#: rc.cpp:649
+#, fuzzy, no-c-format
+msgid ""
+"<qt>Check this box to enable bookmark creation when converting text files to "
+"Palm DOC databases. Most doc readers support bookmarks. In order to create a "
+"bookmark, it is necessary to to provide the location in the text where the "
+"bookmark should be set and the bookmark title, in at least one of the formats "
+"listed below.</qt>"
+msgstr ""
+"Želiti li da konvertujete markere? Većina DOC čitača podržava markere. Morate "
+"dodatno pružiti i neke informacije o tome gdje bi markeri trebalo da se postave "
+"i njihove naslove. Uključite bar jednu od dole ponuđenih vrsta markera."
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 237
+#: rc.cpp:652 rc.cpp:781
+#, no-c-format
+msgid "&Inline tags in text"
+msgstr "&Unutrašnje oznake u tekstu"
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 243
+#: rc.cpp:655
+#, no-c-format
+msgid ""
+"Check this box to create bookmarks from inline tags in the text. The inline tag "
+"consist of tags in the form <* bookmarktext *>. The bookmark location is set "
+"using the location of the inline tag in the text, and  the name is the text "
+"between the <* and the *>. The inline tag (<*...*>) will be removed from the "
+"text."
+msgstr ""
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 251
+#: rc.cpp:658 rc.cpp:775
+#, fuzzy, no-c-format
+msgid "&Encoding:"
+msgstr "&Kodiranje:"
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 262
+#: rc.cpp:661 rc.cpp:787
+#, no-c-format
+msgid "&Tags at end of text"
+msgstr "Oznake na &kraju teksta"
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 265
+#: rc.cpp:664
+#, fuzzy, no-c-format
+msgid ""
+"Check this box to convert tags of the form <bookmarkname> "
+"at the end of the text to bookmarks. The text inside the tag (\"bookmarkname\") "
+"will be searched in the text, and whenever found, a bookmark will be set there. "
+"The endtags <...> will then be removed from the end of the text."
+msgstr ""
+"Oznake oblika <ime-markera> na kraju teksta biće korišćene da se tekst pretraži "
+"za obrascem između < i >. Gde god se 'ime-markera' pojavi u tekstu, tu će biti "
+"postavljen marker. Krajnji tagovi <...> biće zatim uklonjeni sa kraja teksta."
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 273
+#: rc.cpp:667 rc.cpp:808
+#, no-c-format
+msgid "Regular &expressions in .bmk file"
+msgstr "Regularni &izrazi u .bmk datoteci"
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 276
+#: rc.cpp:670
+#, fuzzy, no-c-format
+msgid ""
+"<qt>Check this box to use regular expressions in a file to search the text for "
+"bookmarks. The file should have the same name as the text file, but should end "
+"in .bmk instead of .txt (for instance, the regular expression file for "
+"textname.txt should be textname.bmk). See the documentation for a description "
+"of the format of the bmk file.</qt>"
+msgstr ""
+"Treba koristiti regularne izraze u datoteci textname.bmk (ako je textname.txt "
+"ime datoteke sa samim tekstom) za pretraživanje teksta za markerima. Pogledajte "
+"dokumentaciju za opis formata .bmk datoteke."
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 291
+#: rc.cpp:673 rc.cpp:814
+#, no-c-format
+msgid "Handheld -> PC"
+msgstr "Ručni računar -> PC"
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 319
+#: rc.cpp:676
+#, no-c-format
+msgid "Do not convert, if text unchanged (only bookmarks)"
+msgstr "Ne konvertuj ako je tekst nepromenjen (samo markeri)"
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 322
+#: rc.cpp:679
+#, fuzzy, no-c-format
+msgid ""
+"<qt>Check this box to avoid syncing the text on the handheld to the PC if you "
+"only changed the bookmarks on the handheld (but not the text).</qt>"
+msgstr ""
+"Uključite ovo ako ne želite da sinhronizujete tekst od ručnog računara ka PC-ju "
+"kada su samo markeri na ručnom računaru izmenjeni, ali ne i tekst."
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 330
+#: rc.cpp:682 rc.cpp:817
+#, no-c-format
+msgid "Convert Bookmarks"
+msgstr "Konvertuj markere"
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 341
+#: rc.cpp:685 rc.cpp:823
+#, fuzzy, no-c-format
+msgid "Do &not convert bookmarks"
+msgstr "&Ne konvertuj markere"
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 347
+#: rc.cpp:688
+#, no-c-format
+msgid ""
+"<qt>Check this box to avoid converting Palm DOC bookmarks to inline tags or to "
+"a bookmark file.</qt>"
+msgstr ""
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 355
+#: rc.cpp:691
+#, no-c-format
+msgid "Convert into .bm &file"
+msgstr "Konvertuj u .bm &datoteka"
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 364
+#: rc.cpp:694
+#, no-c-format
+msgid ""
+"<qt>Check this box to convert the Palm DOC database bookmarks to a separate "
+"file, in the bmk format (see more about this format in the documentation). The "
+"resulting bookmark file shares the same filename as the resulting .txt file, "
+"but ends in .bmk instead. This approach creates a clean text file and a "
+"bookmark file.</qt>"
+msgstr ""
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 372
+#: rc.cpp:697 rc.cpp:820
+#, no-c-format
+msgid "Convert as &inline tags"
+msgstr "Konvertuj kao &unutrašnje oznake"
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 378
+#: rc.cpp:700
+#, no-c-format
+msgid ""
+"<qt>Check this box to convert the Palm DOC database bookmarks to inline tags, "
+"in the form &lt;* BookmarkName *&gt;. These tags are inserted in the text in "
+"the position marked by the bookmark, and the text inside the tag corresponds to "
+"the bookmark name. Inline tags are easy to create, delete, move and edit.</qt>"
+msgstr ""
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 404
+#: rc.cpp:709
+#, no-c-format
+msgid ""
+"If the same text was changed on the PC and the handheld, which of the two "
+"versions should be used as the new version?"
+msgstr ""
+"Ako je isti tekst izmenjen i na PC-ju i na ručnom računaru, koja od ove dve "
+"verzije treba da se koristi kao nova?"
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 407
+#: rc.cpp:712
+#, no-c-format
+msgid ""
+"<qt>The Palm DOC conduit does not feature merging the modifications when a text "
+"is changed both in the handheld and in the computer. Therefore, the choice is "
+"between working with the files out of sync, or discarding the changes in one of "
+"them.</qt>"
+msgstr ""
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 418
+#: rc.cpp:715
+#, no-c-format
+msgid "&No resolution"
+msgstr "&Bez razrešenja"
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 424
+#: rc.cpp:718
+#, no-c-format
+msgid ""
+"<qt>The Palm DOC conduit does not feature merging the modifications when a text "
+"is changed both in the handheld and in the computer. Therefore, when conflicts "
+"appear, the choice is between working with the files out of sync, or discarding "
+"the changes in one of them. Select this option to prevent KPilot from "
+"overwriting your modifications.</qt>"
+msgstr ""
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 432
+#: rc.cpp:721
+#, no-c-format
+msgid "P&DA overrides"
+msgstr "Prednost i&ma PDA"
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 438
+#: rc.cpp:724
+#, no-c-format
+msgid ""
+"<qt>The Palm DOC conduit does not feature merging the modifications when a text "
+"is changed both in the handheld and in the computer. Therefore, when conflicts "
+"appear, the choice is between working with the files out of sync, or discarding "
+"the changes in one of them. Select this option to make the PDA version "
+"overwrite the PC version in case of conflict.</qt>"
+msgstr ""
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 446
+#: rc.cpp:727
+#, no-c-format
+msgid "P&C overrides"
+msgstr "Prednost im&a PC"
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 452
+#: rc.cpp:730
+#, no-c-format
+msgid ""
+"<qt>The Palm DOC conduit does not feature merging the modifications when a text "
+"is changed both in the handheld and in the computer. Therefore, when conflicts "
+"appear, the choice is between working with the files out of sync, or discarding "
+"the changes in one of them. Select this option to make the PC version overwrite "
+"the PDA version in case of conflict.</qt>"
+msgstr ""
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 460
+#: rc.cpp:733
+#, no-c-format
+msgid "&Ask the user"
+msgstr "&Pitaj korisnika"
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 469
+#: rc.cpp:736
+#, no-c-format
+msgid ""
+"<qt>The Palm DOC conduit does not feature merging the modifications when a text "
+"is changed both in the handheld and in the computer. Therefore, when conflicts "
+"appear, the choice is between working with the files out of sync, or discarding "
+"the changes in one of them. Select this option to show the resolution dialog to "
+"let the user decide on a case by case basis.</qt>"
+msgstr ""
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 479
+#: rc.cpp:739
+#, fuzzy, no-c-format
+msgid "&Always show the resolution dialog"
+msgstr "&Uvijek prikaži dijalog za razrešenje, čak i kada nema konflikata."
+
+#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 482
+#: rc.cpp:742
+#, fuzzy, no-c-format
+msgid ""
+"<qt>Check this box to force the resolution dialog to appear even when there are "
+"no conflicts.</qt>"
+msgstr "&Uvijek prikaži dijalog za razrešenje, čak i kada nema konflikata."
+
+#. i18n: file ./conduits/docconduit/kpalmdoc_dlgbase.ui line 47
+#: rc.cpp:748
+#, no-c-format
+msgid "&PalmDOC file:"
+msgstr "PalmDOC &datoteka:"
+
+#. i18n: file ./conduits/docconduit/kpalmdoc_dlgbase.ui line 77
+#: rc.cpp:754
+#, no-c-format
+msgid "Convert whole &folders"
+msgstr "Konvertuj cele &direktorije"
+
+#. i18n: file ./conduits/docconduit/kpalmdoc_dlgbase.ui line 85
+#: rc.cpp:757
+#, fuzzy, no-c-format
+msgid ""
+"Folder where copies of the handheld databases are kept. You can install them to "
+"any PalmOS handheld, and distribute these copies to other people (but beware of "
+"copyright infringement)."
+msgstr ""
+"Direktorijum gdje se čuvaju kopije baza podataka sa ručnog računara. Možete ih "
+"instalirati na bilo koji PalmOS ručni računar, i distribuirati ove kopije "
+"drugim osobama (ali pazite na poštovanje autorskih prava!)"
+
+#. i18n: file ./conduits/docconduit/kpalmdoc_dlgbase.ui line 93
+#: rc.cpp:760
+#, no-c-format
+msgid "&Ask before overwriting files"
+msgstr "&Pitaj pre prebrisivanja fajlova"
+
+#. i18n: file ./conduits/docconduit/kpalmdoc_dlgbase.ui line 101
+#: rc.cpp:763
+#, no-c-format
+msgid "&Verbose messages"
+msgstr "&Detaljne poruke"
+
+#. i18n: file ./conduits/docconduit/kpalmdoc_dlgbase.ui line 109
+#: rc.cpp:766
+#, no-c-format
+msgid "Convert Text to PalmDOC"
+msgstr "Konvertuj tekst u PalmDOC"
+
+#. i18n: file ./conduits/docconduit/kpalmdoc_dlgbase.ui line 117
+#: rc.cpp:769
+#, no-c-format
+msgid "Convert PalmDOC to Text"
+msgstr "Konvertuj PalmDOC u tekst"
+
+#. i18n: file ./conduits/docconduit/kpalmdoc_dlgbase.ui line 142
+#: rc.cpp:772
+#, no-c-format
+msgid ""
+"Enter the name of the folder where the text files reside on the PC. All files "
+"with extension .txt will be synced to the handheld."
+msgstr ""
+"Unesite ime direktorija gdje želite da se nalaze tekstualni datoteke na PC-ju. "
+"Svi datoteke sa nastavkom .txt biće sinhronizovani sa ručnim računarom."
+
+#. i18n: file ./conduits/docconduit/kpalmdoc_dlgbase.ui line 236
+#: rc.cpp:784
+#, no-c-format
+msgid ""
+"When a <* bookmarktext *> appears somewhere in the text, a bookmark will be set "
+"at this position, and the text between the <* and the *> "
+"will be used as bookmark name. The <*...*> will be removed from the text."
+msgstr ""
+"Kada se negdje u tekstu pojavi <* markiran tekst *>, na to mjesto će biti "
+"postavljen marker, a tekst između <* i *> biće iskorišten kao ime markera. "
+"<*...*> biće uklonjeno iz teksta."
+
+#. i18n: file ./conduits/docconduit/kpalmdoc_dlgbase.ui line 247
+#: rc.cpp:790
+#, no-c-format
+msgid ""
+"Tags of the form <bookmarkname> at the end of the text will be used to search "
+"the text for the pattern between the < and >. Whenever \"bookmarkname\" appears "
+"in the text, a bookmark will be set there. The endtags <...> "
+"will then be removed from the end of the text."
+msgstr ""
+"Oznake oblika <ime-markera> na kraju teksta biće korišćene da se tekst pretraži "
+"za obrascem između < i >. Gde god se 'ime-markera' pojavi u tekstu, tu će biti "
+"postavljen marker. Krajnji tagovi <...> biće zatim uklonjeni sa kraja teksta."
+
+#. i18n: file ./conduits/docconduit/kpalmdoc_dlgbase.ui line 264
+#: rc.cpp:799
+#, no-c-format
+msgid ""
+"The Palm doc format supports compressing the text to save memory. If you check "
+"this box, the text will consume about 50% less memory than in uncompressed "
+"state. Almost all DOC readers on the Palm support compressed texts."
+msgstr ""
+"PalmDOC format podržava kompresovanje teksta da bi se uštedela memorija. Ako "
+"popunite ovu kućicu, tekst će zauzimati oko 50% manje memorije u odnosu na "
+"nekompresovano stanje. Skoro svi DOC čitači podržavaju ovako kompresovane "
+"tekstove."
+
+#. i18n: file ./conduits/docconduit/kpalmdoc_dlgbase.ui line 278
+#: rc.cpp:805
+#, no-c-format
+msgid ""
+"Do you want to convert bookmarks? Most doc readers support bookmarks. You have "
+"to provide some information about where the bookmarks should be set and their "
+"titles. Check at least one of the bookmark types below."
+msgstr ""
+"Želiti li da konvertujete markere? Većina DOC čitača podržava markere. Morate "
+"dodatno pružiti i neke informacije o tome gdje bi markeri trebalo da se postave "
+"i njihove naslove. Uključite bar jednu od dole ponuđenih vrsta markera."
+
+#. i18n: file ./conduits/docconduit/kpalmdoc_dlgbase.ui line 289
+#: rc.cpp:811
+#, no-c-format
+msgid ""
+"Use regular expressions in a file textname.bmk (textname.txt is the filename of "
+"the text) to search the text for bookmarks.See the documentation for a "
+"description of the format of the bmk file."
+msgstr ""
+"Treba koristiti regularne izraze u datoteci textname.bmk (ako je textname.txt "
+"ime datoteke sa samim tekstom) za pretraživanje teksta za markerima. Pogledajte "
+"dokumentaciju za opis formata .bmk datoteke."
+
+#. i18n: file ./conduits/docconduit/kpalmdoc_dlgbase.ui line 386
+#: rc.cpp:826
+#, no-c-format
+msgid "Convert as &end tags"
+msgstr "Konvertuj kao krajnje &tagove"
+
+#. i18n: file ./conduits/docconduit/kpalmdoc_dlgbase.ui line 394
+#: rc.cpp:829
+#, no-c-format
+msgid "Convert into .bmk &file"
+msgstr "Konvertuj u .bmk &datoteka"
+
+#. i18n: file ./conduits/notepadconduit/notepad-setup.ui line 17
+#: rc.cpp:832
+#, no-c-format
+msgid "Path to the directory to which the pictures should be exported."
+msgstr ""
+
+#. i18n: file ./conduits/notepadconduit/notepad-setup.ui line 65
+#: rc.cpp:838
+#, fuzzy, no-c-format
+msgid "Output:"
+msgstr "Izlazni &datoteka:"
+
+#. i18n: file ./conduits/recordconduit/setup_base.ui line 107
+#: rc.cpp:856
+#, no-c-format
+msgid "&Databases:"
+msgstr "&Baza podataka:"
+
+#. i18n: file ./conduits/recordconduit/setup_base.ui line 118
+#: rc.cpp:859
+#, no-c-format
+msgid ""
+"<qt>The Null-conduit can be attached to several databases, effectively "
+"preventing them from Syncing. Enter the database names here.</qt>"
+msgstr ""
+"<qt>Nulti provod može da se prikači na više baza podataka, efektivno ih time "
+"sprečavajući da se sinhronizuju. Unesite ovdje imena baza podataka.</qt>"
+
+#. i18n: file ./conduits/recordconduit/setup_base.ui line 143
+#: rc.cpp:862
+#, no-c-format
+msgid "Simulate failure"
+msgstr "Simuliraj neuspjeh"
+
+#. i18n: file ./conduits/recordconduit/setup_base.ui line 146
+#: rc.cpp:865
+#, no-c-format
+msgid "Force the conduit to simulate a failure to perform the HotSync."
+msgstr "Forsira se provod da simulira neuspjeh vruće sinhronizacije."
+
+#. i18n: file ./conduits/popmail/setup-dialog.ui line 34
+#: rc.cpp:868
+#, no-c-format
+msgid "Send Mail"
+msgstr "Pošalji poštu"
+
+#. i18n: file ./conduits/popmail/setup-dialog.ui line 62
+#: rc.cpp:871
+#, no-c-format
+msgid "Send method:"
+msgstr "Način slanja:"
+
+#. i18n: file ./conduits/popmail/setup-dialog.ui line 65
+#: rc.cpp:874 rc.cpp:904
+#, no-c-format
+msgid ""
+"<qt>Select the method KPilot will use to send the mail from your Handheld to "
+"the recipients here. Depending on the method you choose, the other fields in "
+"the dialog may be enabled or disabled. Currently, the only <i>working</i> "
+"method is through KMail.</qt>"
+msgstr ""
+
+#. i18n: file ./conduits/popmail/setup-dialog.ui line 73
+#: rc.cpp:877
+#, no-c-format
+msgid "Email address:"
+msgstr "E-adresa:"
+
+#. i18n: file ./conduits/popmail/setup-dialog.ui line 76
+#: rc.cpp:880 rc.cpp:886
+#, fuzzy, no-c-format
+msgid "<qt>Enter the email address you want to send messages as here.</qt>"
+msgstr "Postavite ovo na e-adresu preko koje želite da šaljete poruke."
+
+#. i18n: file ./conduits/popmail/setup-dialog.ui line 84
+#: rc.cpp:883
+#, no-c-format
+msgid "$USER"
+msgstr "$USER"
+
+#. i18n: file ./conduits/popmail/setup-dialog.ui line 95
+#: rc.cpp:889
+#, no-c-format
+msgid "Signature file:"
+msgstr "Fajl sa potpisom:"
+
+#. i18n: file ./conduits/popmail/setup-dialog.ui line 98
+#: rc.cpp:892 rc.cpp:895
+#, no-c-format
+msgid ""
+"<qt>If you want to add a signature file, enter the location of your signature "
+"file (usually, <i>.signature</i>, located in your home folder) here, or select "
+"it clicking the file picker button. The signature file contains the text that "
+"is added to the end of your outgoing mail messages.</qt>"
+msgstr ""
+
+#. i18n: file ./conduits/popmail/setup-dialog.ui line 112
+#: rc.cpp:898
+#, no-c-format
+msgid "Do Not Send Mail"
+msgstr "Ne šalji poštu"
+
+#. i18n: file ./conduits/popmail/setup-dialog.ui line 117
+#: rc.cpp:901
+#, no-c-format
+msgid "Use KMail"
+msgstr "Koristi KMail"
+
+#. i18n: file ./conduits/vcalconduit/korganizerConduit.ui line 31
+#: rc.cpp:907
+#, no-c-format
+msgid "Calendar-Conduit Options"
+msgstr "Opcije kalendarskog provoda"
+
+#. i18n: file ./conduits/vcalconduit/korganizerConduit.ui line 105
+#: rc.cpp:916
+#, no-c-format
+msgid "&Standard calendar"
+msgstr "&Standardni kalendar"
+
+#. i18n: file ./conduits/vcalconduit/korganizerConduit.ui line 108
+#: rc.cpp:919
+#, fuzzy, no-c-format
+msgid ""
+"<qt>Select this option to synchronize with the calendar specified by the TDE "
+"calendar settings.</qt>"
+msgstr ""
+"Izaberite ovo da bi se koristio kalendar naveden u TDE-ovim postavkama "
+"kalenara."
+
+#. i18n: file ./conduits/vcalconduit/korganizerConduit.ui line 119
+#: rc.cpp:922
+#, no-c-format
+msgid "Calendar &file:"
+msgstr "Kalendarski &datoteka:"
+
+#. i18n: file ./conduits/vcalconduit/korganizerConduit.ui line 122
+#: rc.cpp:925
+#, no-c-format
+msgid ""
+"<qt>Select this option to use a specific calendar file, instead of the standard "
+"TDE calendar. This file must be in the in the vCalendar or iCalendar format. "
+"Enter the location of this file in the edit box or select it clicking the file "
+"picker button.</qt>"
+msgstr ""
+
+#. i18n: file ./conduits/vcalconduit/korganizerConduit.ui line 141
+#: rc.cpp:928
+#, no-c-format
+msgid ""
+"<qt>Enter here the location and filename of the calendar file or select it "
+"clicking the file picker button. This file must be in the iCalendar or "
+"vCalendar format.</qt>"
+msgstr ""
+
+#. i18n: file ./conduits/vcalconduit/korganizerConduit.ui line 151
+#: rc.cpp:931
+#, no-c-format
+msgid "Store &archived records in the TDE calendar"
+msgstr "Skladišti &arhivirane slogove u TDE-ovom kalendaru"
+
+#. i18n: file ./conduits/vcalconduit/korganizerConduit.ui line 155
+#: rc.cpp:934
+#, no-c-format
+msgid ""
+"When this box is checked, archived records will still\n"
+"be saved in the calendar on the PC."
+msgstr ""
+"Kada je ova kućica popunjena, arhivirani slogovi biće i dalje\n"
+"čuvani u kalendaru na PC-ju."
+
+#. i18n: file ./conduits/vcalconduit/korganizerConduit.ui line 233
+#: rc.cpp:965
+#, fuzzy, no-c-format
+msgid ""
+"<qt>Select in this list how conflicting entries (entries which were edited both "
+"on your handheld and on the PC) are resolved. Possibly values are \"Use "
+"KPilot's Global Setting\" to use the settings defined in KPilot HotSync "
+"configuration, \"Ask User\" to let you decide case by case, \"Do Nothing\" to "
+"allow the entries to be different, \"PC overrides\", \"Handheld overrides\", "
+"\"Use values from last sync\" and \"Use both entries\" to create a new entry on "
+"both the PC and handheld. Note that this does <i>not</i> "
+"handle double-scheduling conflicts.</qt>"
+msgstr ""
+"<qt>Ovdje možete izabrati kako će biti razrešene konfliktne stavke (stavke koje "
+"su bile uređivane i na ručnom računaru i na PC-ju).</qt>"
+
+#. i18n: file ./kpilot/todoEditor_base.ui line 32
+#: rc.cpp:968
+#, no-c-format
+msgid "&Description:"
+msgstr "&Opis:"
+
+#. i18n: file ./kpilot/todoEditor_base.ui line 54
+#: rc.cpp:971
+#, no-c-format
+msgid "&Note:"
+msgstr "&Napomena:"
+
+#. i18n: file ./kpilot/todoEditor_base.ui line 71
+#: rc.cpp:974
+#, no-c-format
+msgid "Ca&tegory:"
+msgstr "&Kategorija:"
+
+#. i18n: file ./kpilot/todoEditor_base.ui line 90
+#: rc.cpp:977
+#, no-c-format
+msgid "&Priority:"
+msgstr "&Prioritet:"
+
+#. i18n: file ./kpilot/todoEditor_base.ui line 104
+#: rc.cpp:983
+#, no-c-format
+msgid "2"
+msgstr "2"
+
+#. i18n: file ./kpilot/todoEditor_base.ui line 109
+#: rc.cpp:986
+#, no-c-format
+msgid "3"
+msgstr "3"
+
+#. i18n: file ./kpilot/todoEditor_base.ui line 114
+#: rc.cpp:989
+#, no-c-format
+msgid "4"
+msgstr "4"
+
+#. i18n: file ./kpilot/todoEditor_base.ui line 119
+#: rc.cpp:992
+#, no-c-format
+msgid "5"
+msgstr "5"
+
+#. i18n: file ./kpilot/todoEditor_base.ui line 147
+#: rc.cpp:995
+#, no-c-format
+msgid "&Completed"
+msgstr "&Završeno"
+
+#. i18n: file ./kpilot/todoEditor_base.ui line 155
+#: rc.cpp:998
+#, no-c-format
+msgid "Has &end date:"
+msgstr "Ima datum &kraja:"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_sync.ui line 18
+#: rc.cpp:1001 rc.cpp:1058 rc.cpp:1108 rc.cpp:1220 rc.cpp:1313
+#, no-c-format
+msgid "KPilot Options"
+msgstr "Opcije KPilot-a"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_sync.ui line 32
+#: rc.cpp:1004
+#, fuzzy, no-c-format
+msgid "Do full sync when chan&ging PCs"
+msgstr "&Napravi kompletnu rezervnu kopiju pri promjeni PC-ja"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_sync.ui line 38
+#: rc.cpp:1007
+#, no-c-format
+msgid ""
+"<qt>Check this box to perform a full sync when your last sync was performed "
+"with another PC or system, to guarantee the completeness of your data.</qt>"
+msgstr ""
+
+#. i18n: file ./kpilot/kpilotConfigDialog_sync.ui line 44
+#: rc.cpp:1010
+#, fuzzy, no-c-format
+msgid "HotSync (sync all changes)"
+msgstr "&Brza sinhornizacija (ako je moguća), bez rezervne kopije"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_sync.ui line 49
+#: rc.cpp:1013
+#, no-c-format
+msgid "FullSync (sync also unchanged records)"
+msgstr ""
+
+#. i18n: file ./kpilot/kpilotConfigDialog_sync.ui line 66
+#: rc.cpp:1022
+#, no-c-format
+msgid ""
+"<qt>Select in this list the synchronization type that KPilot will use as "
+"default. Possible values are:"
+"<br>\"HotSync\", to run all selected conduits, and sync the databases with a "
+"modified flag set, updating the modified records only;"
+"<br>\"FullSync\" to run all selected conduits, and sync all databases, reading "
+"all records, and performing a full backup;"
+"<br>\"Copy PC to handheld\" to run all conduits and sync all databases, but "
+"instead of merging the information from both sources, copy the PC data to the "
+"handheld;"
+"<br>\"Copy handheld to PC\" to run all conduits and sync all databases, but "
+"instead of merging the information from both sources, copy the handheld data to "
+"the PC.</qt>"
+msgstr ""
+
+#. i18n: file ./kpilot/kpilotConfigDialog_sync.ui line 74
+#: rc.cpp:1025
+#, fuzzy, no-c-format
+msgid "&Default sync:"
+msgstr "&Posebna sinhronizacija:"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_sync.ui line 132
+#: rc.cpp:1046
+#, fuzzy, no-c-format
+msgid ""
+"<qt>Select in this list how conflicting entries (entries which were edited both "
+"on your handheld and on the PC) are resolved. Possibly values are  \"Ask User\" "
+"to let you decide case by case, \"Do Nothing\" to allow the entries to be "
+"different, \"PC overrides\", \"Handheld overrides\", \"Use values from last "
+"sync\" and \"Use both entries\" to create a new entry on both the PC and "
+"handheld. Note that the conflict resolution option selected here can be "
+"overridden by conduits that have their own conflict resolution "
+"configuration.</qt>"
+msgstr ""
+"<qt>Ovdje možete izabrati kako će biti razrešene konfliktne stavke (stavke koje "
+"su bile uređivane i na ručnom računaru i na PC-ju).</qt>"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_sync.ui line 159
+#: rc.cpp:1052
+#, no-c-format
+msgid "Do not sync when screensaver is active"
+msgstr ""
+
+#. i18n: file ./kpilot/kpilotConfigDialog_sync.ui line 165
+#: rc.cpp:1055
+#, no-c-format
+msgid ""
+"<qt>Check this box to prevent KPilot from syncing your handheld while the "
+"screensaver is active: this is a security measure to prevent others from "
+"syncing <i>their</i> handhelds with your data.  This option must be disabled "
+"when you use a different desktop, since KPilot is not aware of screensavers "
+"other than TDE's.</qt>"
+msgstr ""
+
+#. i18n: file ./kpilot/kpilotConfigDialog_startup.ui line 33
+#: rc.cpp:1061
+#, fuzzy, no-c-format
+msgid "Exit Options"
+msgstr "Opcije KPilot-a"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_startup.ui line 44
+#: rc.cpp:1064
+#, fuzzy, no-c-format
+msgid "S&top KPilot's system tray application on exit"
+msgstr "Provod KPilot-a za sistemske informacije"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_startup.ui line 47
+#: rc.cpp:1067
+#, fuzzy, no-c-format
+msgid ""
+"<qt>Check this box to stop the KPilot daemon when you quit KPilot (only if "
+"KPilot started the daemon itself).</qt>"
+msgstr ""
+"<qt>Zaustavlja se KPilot-ov demon kada izađete iz KPilot-a (samo ako je KPilot "
+"i pokrenuo demona).</qt>"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_startup.ui line 55
+#: rc.cpp:1070
+#, no-c-format
+msgid "Quit &after HotSync"
+msgstr "Izađi &poslije vruće sinhronizacije"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_startup.ui line 58
+#: rc.cpp:1073
+#, fuzzy, no-c-format
+msgid ""
+"<qt>Check this box to stop both KPilot and the KPilot daemon after the HotSync "
+"finishes. This may be useful for systems where KPilot is started by the USB "
+"daemon.</qt>"
+msgstr ""
+"<qt>Zaustavlja se i KPilot i KPilot-ov demon pošto se vruća sinhronizacija "
+"završi.\n"
+"Ovo može biti korisno na sistemima kod kojih se KPilot pokreće pomoću USB "
+"demona</qt>"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_startup.ui line 68
+#: rc.cpp:1076
+#, no-c-format
+msgid "Startup Options"
+msgstr "Opcije pokretanja"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_startup.ui line 79
+#: rc.cpp:1079 rc.cpp:1214
+#, fuzzy, no-c-format
+msgid "&Start KPilot at login"
+msgstr "P&okreni demona po prijavljivanju"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_startup.ui line 82
+#: rc.cpp:1082
+#, fuzzy, no-c-format
+msgid ""
+"<qt>Check this box to start up the KPilot daemon every time you log in to "
+"TDE.</qt>"
+msgstr "<qt>Pokreće se KPilot-ov demon svaki put kada se prijavite u TDE.</qt>"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_startup.ui line 90
+#: rc.cpp:1085
+#, fuzzy, no-c-format
+msgid "S&how KPilot in system tray"
+msgstr "&Prikaži demona u panelu"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_startup.ui line 93
+#: rc.cpp:1088
+#, fuzzy, no-c-format
+msgid ""
+"<qt>Check this box to place a Kpilot icon in the system tray, which shows the "
+"daemon's status, and allows you to select the next sync type and to configure "
+"KPilot.</qt>"
+msgstr ""
+"<qt>Postavlja se ikona vruće sinhronizacije u sistemsku kasetu, koja prikazuje "
+"status demona i omogućava vam da podesite KPilot-a.</qt>"
+
+#. i18n: file ./kpilot/kpilotConfigWizard_app.ui line 26
+#: rc.cpp:1091
+#, no-c-format
+msgid ""
+"Finally, you can configure KPilot specifically for some PIM applications, like "
+"Kontact (TDE's integrated PIM application) or Evolution (GNOME's integrated PIM "
+"application).\n"
+"\n"
+"Press \"Finish\" to setup KPilot according to the settings in this "
+"configuration Wizard."
+msgstr ""
+
+#. i18n: file ./kpilot/kpilotConfigWizard_app.ui line 37
+#: rc.cpp:1096
+#, no-c-format
+msgid "Set Default Values for Syncing With"
+msgstr ""
+
+#. i18n: file ./kpilot/kpilotConfigWizard_app.ui line 48
+#: rc.cpp:1099
+#, no-c-format
+msgid "&TDE-PIM suite (Kontact)"
+msgstr ""
+
+#. i18n: file ./kpilot/kpilotConfigWizard_app.ui line 59
+#: rc.cpp:1102
+#, fuzzy, no-c-format
+msgid "&GNOME-PIM (Evolution)"
+msgstr "&Bez razrešenja"
+
+#. i18n: file ./kpilot/kpilotConfigWizard_app.ui line 67
+#: rc.cpp:1105
+#, fuzzy, no-c-format
+msgid "No sync, just backup"
+msgstr "&Normalna sinhronizacija, napravi rezervnu kopiju"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_backup.ui line 29
+#: rc.cpp:1111
+#, no-c-format
+msgid "Backup Frequency"
+msgstr ""
+
+#. i18n: file ./kpilot/kpilotConfigDialog_backup.ui line 54
+#: rc.cpp:1114
+#, fuzzy, no-c-format
+msgid "Do &backup:"
+msgstr "&Bez rezervne kopije:"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_backup.ui line 63
+#: rc.cpp:1117
+#, fuzzy, no-c-format
+msgid "On every HotSync"
+msgstr ""
+"Kraj vruće sinhronizacije\n"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_backup.ui line 68
+#: rc.cpp:1120
+#, no-c-format
+msgid "On request only"
+msgstr ""
+
+#. i18n: file ./kpilot/kpilotConfigDialog_backup.ui line 90
+#: rc.cpp:1123
+#, no-c-format
+msgid "Databases"
+msgstr "Baze podataka"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_backup.ui line 107
+#: rc.cpp:1126
+#, no-c-format
+msgid "&No backup:"
+msgstr "&Bez rezervne kopije:"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_backup.ui line 113
+#: rc.cpp:1129 rc.cpp:1138
+#, no-c-format
+msgid ""
+"<qt>"
+"<p>Enter the databases types you wish to exclude from the backup operation "
+"here. Use this setting if backing up some databases crashes the handheld, or if "
+"you do not want a backup of some databases (like AvantGo pages).</p>"
+"<p>Entries with square brackets [] are <i>creator codes</i> like <tt>[lnch]</tt> "
+"and can exclude a whole range of databases. Entries without the brackets list "
+"database names, and may include shell-style wildcards, like <tt>*_a68k</tt>.</p>"
+"</qt>"
+msgstr ""
+
+#. i18n: file ./kpilot/kpilotConfigDialog_backup.ui line 127
+#: rc.cpp:1132
+#, no-c-format
+msgid "Not &restored:"
+msgstr "Nije &vraćeno:"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_backup.ui line 133
+#: rc.cpp:1135 rc.cpp:1141
+#, no-c-format
+msgid ""
+"<qt>"
+"<p>Enter the databases types you wish to exclude from the restore operation "
+"here (like AvantGo databases). They will be skipped even if they exist in the "
+"set of backup databases on the handheld. If you still want to install an "
+"ignored database to the handheld, you can always manually install it to the "
+"handheld.</p>"
+"<p>Entries with square brackets [] are <i>creator codes</i> like <tt>[lnch]</tt> "
+"and can exclude a whole range of databases. Entries without the brackets list "
+"database names, and may include shell-style wildcards, like <tt>*_a68k</tt>.</p>"
+"</qt>"
+msgstr ""
+
+#. i18n: file ./kpilot/kpilotConfigDialog_backup.ui line 157
+#: rc.cpp:1144 rc.cpp:1150
+#, no-c-format
+msgid "..."
+msgstr "..."
+
+#. i18n: file ./kpilot/kpilotConfigDialog_backup.ui line 160
+#: rc.cpp:1147
+#, no-c-format
+msgid ""
+"<qt>Click here to open the database selection dialog. This dialog allows you to "
+"check the databases you want to exclude from the backup from a list.</qt>"
+msgstr ""
+
+#. i18n: file ./kpilot/kpilotConfigDialog_backup.ui line 171
+#: rc.cpp:1153
+#, no-c-format
+msgid ""
+"<qt>Click here to open the database selection dialog. This dialog allows you to "
+"select the databases you want to exclude from the restore operation from a "
+"list.</qt>"
+msgstr ""
+
+#. i18n: file ./kpilot/kpilotConfigDialog_backup.ui line 181
+#: rc.cpp:1156
+#, fuzzy, no-c-format
+msgid "Run conduits durin&g a backup sync"
+msgstr "Pokreni podešavanje provoda"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_backup.ui line 184
+#: rc.cpp:1159
+#, no-c-format
+msgid ""
+"<qt>Check this box to run the selected conduits before every backup. This makes "
+"sure the backup is up to date with the last changes from your PC.</qt>"
+msgstr ""
+
+#. i18n: file ./kpilot/kpilotConfigWizard_user.ui line 24
+#: rc.cpp:1162
+#, no-c-format
+msgid "This wizard will help you configure KPilot."
+msgstr ""
+
+#. i18n: file ./kpilot/kpilotConfigWizard_user.ui line 35
+#: rc.cpp:1165
+#, no-c-format
+msgid ""
+"As a first step, we need to determine the user name and how the handheld is "
+"connected to the computer."
+msgstr ""
+
+#. i18n: file ./kpilot/kpilotConfigWizard_user.ui line 46
+#: rc.cpp:1168
+#, fuzzy, no-c-format
+msgid "Handheld && User Name"
+msgstr "Koristi ime sa ručnog računara"
+
+#. i18n: file ./kpilot/kpilotConfigWizard_user.ui line 62
+#: rc.cpp:1171
+#, no-c-format
+msgid ""
+"<p>You can either let KPilot detect these values automatically (for this you "
+"need your handheld ready and connected to the PC)  or enter them manually.</p>\n"
+"<p>Please enter the username exactly as set on the handheld. </p>\n"
+"<p>If setting the device type manually (i.e., if automatic detection did not "
+"work for you), please look below for tips on choosing the right device name.  "
+"{0...n} means a number from 0 up to a very large number, though usually just "
+"255.\n"
+"<p>\n"
+"Serial Port: an old method of connection, used primarily by the original line "
+"of Palm Pilots, and various Palm-based cellphones.  Device name will look like "
+"/dev/ttyS{0...n} (Linux) or /dev/cuaa{0...n} (FreeBSD).</p>\n"
+"<p>\n"
+"USB Port: A newer style of connection, used by most newer Palms, Handsprings, "
+"and Sony Clies.  Device name will look like /dev/ttyUSB{0...n} or "
+"/dev/usb/tts/{0...n} (Linux) or /dev/ucom{0...n} (FreeBSD).  On Linux, "
+"definitely check both 0 and 1: newer devices tend to use 1; older devices tend "
+"to use 0.</p>\n"
+"<p>\n"
+"Infrared: (pronounced infra-red) is a relatively slow connection type used "
+"solely as a last resort.  Device name will be /dev/ircomm0 or /dev/ttyS{0...n} "
+"(Linux), or /dev/sio{0...n} (FreeBSD).</p>\n"
+"<p>\n"
+"Bluetooth: A new connection method, this is used almost exclusively on new, "
+"high-end devices, like the Tungsten T3 or the Zire 72.  Device name will be "
+"/dev/usb/ttub/{0...n} or /dev/ttyUB{0...n} (Linux), or /dev/ttyp{0...n} "
+"(FreeBSD).</p>\n"
+"<p>\n"
+"Network: This has not been tested by any of the KPilot developers themselves "
+"(hardware donations always accepted!), but it has been reported that setting "
+"the device to \"net:any\" will work for network-enabled devices.  However, this "
+"has also been known to lock KPilot up when doing anything other than just "
+"syncing. Use it with caution.\n"
+"</p>"
+msgstr ""
+
+#. i18n: file ./kpilot/kpilotConfigWizard_user.ui line 73
+#: rc.cpp:1187
+#, fuzzy, no-c-format
+msgid "&Device:"
+msgstr "Pilot-ski &uređaj:"
+
+#. i18n: file ./kpilot/kpilotConfigWizard_user.ui line 79
+#: rc.cpp:1190 rc.cpp:1202
+#, fuzzy, no-c-format
+msgid ""
+"<qt>Enter the device the Pilot is attached to (for instance a serial or USB "
+"port) here. You can also use <i>/dev/pilot</i>, and make that a symlink to the "
+"correct device. Use the button below to automatically detect the device. You "
+"need write permission to successfully synchronize with the handheld.</qt>"
+msgstr ""
+"<qt>Unesite uređaj na koji je Pilot povezan, ako je to serijski ili USB port. "
+"Takođe možete koristiti <i>/dev/pilot</i>, i napraviti simboličku vezu do "
+"odgovarajućeg uređaja.</qt>"
+
+#. i18n: file ./kpilot/kpilotConfigWizard_user.ui line 87
+#: rc.cpp:1193
+#, fuzzy, no-c-format
+msgid "&Automatically Detect Handheld && User Name"
+msgstr "Koristi ime sa ručnog računara"
+
+#. i18n: file ./kpilot/kpilotConfigWizard_user.ui line 90
+#: rc.cpp:1196
+#, no-c-format
+msgid ""
+"<qt>Click this button to open the detection dialog. The wizard will try to "
+"automatically find and display the correct device and username for your "
+"handheld. If the wizard cannot retrieve this information, check if you have "
+"write permission for the device.</qt>"
+msgstr ""
+
+#. i18n: file ./kpilot/kpilotConfigWizard_user.ui line 98
+#: rc.cpp:1199
+#, no-c-format
+msgid "/dev/pilot"
+msgstr ""
+
+#. i18n: file ./kpilot/kpilotConfigWizard_user.ui line 109
+#: rc.cpp:1205 rc.cpp:1211
+#, fuzzy, no-c-format
+msgid ""
+"<qt>Enter your username here, as it appears in the Pilot's &quot;Owner&quot; "
+"setting, or use the button below to automatically detect it.</qt>"
+msgstr ""
+"<qt>Ovdje unesite vaše ime, onako kako se pojavljuje u Pilot-ovoj postavci "
+"'Vlasnik'.</qt>"
+
+#. i18n: file ./kpilot/kpilotConfigWizard_user.ui line 117
+#: rc.cpp:1208
+#, fuzzy, no-c-format
+msgid "User na&me:"
+msgstr "&Korisničko ime:"
+
+#. i18n: file ./kpilot/kpilotConfigWizard_user.ui line 139
+#: rc.cpp:1217
+#, no-c-format
+msgid ""
+"<qt>Check this box to make the kpilot daemon load when you first log in until "
+"you log out.  That means (in theory), that you should not have to do anything "
+"other than connect your handheld and push \"sync\", and kpilot will appear and "
+"magically do your bidding. </qt>"
+msgstr ""
+
+#. i18n: file ./kpilot/kpilotConfigDialog_viewers.ui line 47
+#: rc.cpp:1226
+#, no-c-format
+msgid "Make internal viewers &editable"
+msgstr "Učini unutrašnje prikazivače &uredljivim"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_viewers.ui line 53
+#: rc.cpp:1229
+#, no-c-format
+msgid ""
+"<qt>The internal viewers can be read only or editable. The editable mode allows "
+"you to add new records, delete or edit the existing records and sync your "
+"modifications back to the handheld. Check this box to set the internal viewers "
+"to editable mode, uncheck to set them to read only mode.</qt>"
+msgstr ""
+
+#. i18n: file ./kpilot/kpilotConfigDialog_viewers.ui line 61
+#: rc.cpp:1232
+#, no-c-format
+msgid "&Show private records"
+msgstr "Prikaži &privatne slogove"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_viewers.ui line 64
+#: rc.cpp:1235
+#, no-c-format
+msgid ""
+"<qt>Check this box to display in the internal viewers records that are marked "
+"&quot;Private&quot; in the Pilot.</qt>"
+msgstr ""
+
+#. i18n: file ./kpilot/kpilotConfigDialog_viewers.ui line 85
+#: rc.cpp:1241
+#, no-c-format
+msgid "Show as \"&Last, first\""
+msgstr "Prikaži kao 'prezime, &ime'"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_viewers.ui line 88
+#: rc.cpp:1244
+#, fuzzy, no-c-format
+msgid ""
+"<qt>Select this option to display addresses in the internal address viewer "
+"sorted by last name, first name.</qt>"
+msgstr ""
+"<qt>Adrese prikazane u prikazivaču adresa poređane su prema prezimenu, pa "
+"imenu.</qt>"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_viewers.ui line 96
+#: rc.cpp:1247
+#, no-c-format
+msgid "Show as \"&Company, last\""
+msgstr "Prikaži kao '&firma, prezime'"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_viewers.ui line 99
+#: rc.cpp:1250
+#, fuzzy, no-c-format
+msgid ""
+"<qt>Select this option to display addresses in the internal address viewer "
+"sorted by company name, last name.</qt>"
+msgstr ""
+"<qt>Adrese prikazane u prikazivaču adresa poređane su prema imenu firme, pa "
+"prezimenu.</qt>"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_viewers.ui line 121
+#: rc.cpp:1253
+#, no-c-format
+msgid "&Use key field"
+msgstr "Koristi &ključno polje"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_viewers.ui line 124
+#: rc.cpp:1256
+#, fuzzy, no-c-format
+msgid ""
+"<qt>Check this box to combine all entries with the same last name in the "
+"internal address viewer.</qt>"
+msgstr "<qt>Kombinuju se sve stavke sa istim prezimenom.</qt>"
+
+#. i18n: file ./kpilot/dbFlagsEditor_base.ui line 32
+#: rc.cpp:1268
+#, no-c-format
+msgid "Database &name:"
+msgstr "&Ime baze podataka:"
+
+#. i18n: file ./kpilot/dbFlagsEditor_base.ui line 51
+#: rc.cpp:1271
+#, no-c-format
+msgid "&Creator:"
+msgstr "&Kreator:"
+
+#. i18n: file ./kpilot/dbFlagsEditor_base.ui line 70
+#: rc.cpp:1274
+#, no-c-format
+msgid "&Type:"
+msgstr "&Vrsta:"
+
+#. i18n: file ./kpilot/dbFlagsEditor_base.ui line 97
+#: rc.cpp:1277
+#, no-c-format
+msgid "Database Flags"
+msgstr "Zastavice baze podataka"
+
+#. i18n: file ./kpilot/dbFlagsEditor_base.ui line 108
+#: rc.cpp:1280
+#, no-c-format
+msgid "&Ressource database"
+msgstr "&Resursna baza"
+
+#. i18n: file ./kpilot/dbFlagsEditor_base.ui line 116
+#: rc.cpp:1283
+#, no-c-format
+msgid "Rea&d-only"
+msgstr "Samo &za čitanje"
+
+#. i18n: file ./kpilot/dbFlagsEditor_base.ui line 124
+#: rc.cpp:1286
+#, fuzzy, no-c-format
+msgid "Database is &backed up"
+msgstr "Baza podataka ima &rezervnu kopiju"
+
+#. i18n: file ./kpilot/dbFlagsEditor_base.ui line 132
+#: rc.cpp:1289
+#, no-c-format
+msgid "Copy &protected"
+msgstr "Zaštićena od ko&piranja"
+
+#. i18n: file ./kpilot/dbFlagsEditor_base.ui line 159
+#: rc.cpp:1292
+#, no-c-format
+msgid "Misc Flags"
+msgstr "Ostale zastavice"
+
+#. i18n: file ./kpilot/dbFlagsEditor_base.ui line 187
+#: rc.cpp:1295
+#, no-c-format
+msgid "Reset after &installation"
+msgstr "Resetuj poslije &instalacije"
+
+#. i18n: file ./kpilot/dbFlagsEditor_base.ui line 195
+#: rc.cpp:1298
+#, no-c-format
+msgid "E&xclude from sync"
+msgstr "&Izostavi iz sinhronizacije"
+
+#. i18n: file ./kpilot/dbFlagsEditor_base.ui line 205
+#: rc.cpp:1301
+#, no-c-format
+msgid "Time Stamps"
+msgstr "Vremenski pečati"
+
+#. i18n: file ./kpilot/dbFlagsEditor_base.ui line 224
+#: rc.cpp:1304
+#, no-c-format
+msgid "Cr&eation time:"
+msgstr "Vrijeme kr&eiranja:"
+
+#. i18n: file ./kpilot/dbFlagsEditor_base.ui line 235
+#: rc.cpp:1307
+#, no-c-format
+msgid "&Modification time:"
+msgstr "Vrijeme iz&mjene:"
+
+#. i18n: file ./kpilot/dbFlagsEditor_base.ui line 246
+#: rc.cpp:1310
+#, no-c-format
+msgid "Back&up time:"
+msgstr "Vrijeme &rezervnog kopiranja:"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_device.ui line 29
+#: rc.cpp:1316
+#, no-c-format
+msgid "Pilot &device:"
+msgstr "Pilot-ski &uređaj:"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_device.ui line 35
+#: rc.cpp:1319 rc.cpp:1322
+#, fuzzy, no-c-format
+msgid ""
+"<qt>Enter the device the Pilot is attached to (for instance a serial or USB "
+"port) here. You can also use <i>/dev/pilot</i>, and make that a symlink to the "
+"correct device. You need write permission to successfully synchronize with the "
+"handheld.</qt>"
+msgstr ""
+"<qt>Unesite uređaj na koji je Pilot povezan, ako je to serijski ili USB port. "
+"Takođe možete koristiti <i>/dev/pilot</i>, i napraviti simboličku vezu do "
+"odgovarajućeg uređaja.</qt>"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_device.ui line 51
+#: rc.cpp:1325
+#, fuzzy, no-c-format
+msgid "&Speed:"
+msgstr "&Brzina:"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_device.ui line 57
+#: rc.cpp:1328 rc.cpp:1349
+#, no-c-format
+msgid ""
+"<qt>Select the speed of the serial connection to your handheld here. This has "
+"no meaning for USB devices. For an older model, choose 9600. Newer models may "
+"be able to handle speeds up to the maximum listed, 115200. You can experiment "
+"with the connection speed: the manual suggests starting at a speed of 19200 and "
+"trying faster speeds to see if they work.</qt>"
+msgstr ""
+
+#. i18n: file ./kpilot/kpilotConfigDialog_device.ui line 65
+#: rc.cpp:1331 rc.cpp:1361
+#, no-c-format
+msgid ""
+"<qt>Enter your name here, as it appears in the Pilot's &quot;Owner&quot; "
+"setting.</qt>"
+msgstr ""
+"<qt>Ovdje unesite vaše ime, onako kako se pojavljuje u Pilot-ovoj postavci "
+"'Vlasnik'.</qt>"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_device.ui line 88
+#: rc.cpp:1334
+#, no-c-format
+msgid "9600"
+msgstr "9600"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_device.ui line 93
+#: rc.cpp:1337
+#, no-c-format
+msgid "19200"
+msgstr "19200"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_device.ui line 98
+#: rc.cpp:1340
+#, no-c-format
+msgid "38400"
+msgstr "38400"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_device.ui line 103
+#: rc.cpp:1343
+#, no-c-format
+msgid "57600"
+msgstr "57600"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_device.ui line 108
+#: rc.cpp:1346
+#, no-c-format
+msgid "115200"
+msgstr "115200"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_device.ui line 123
+#: rc.cpp:1352
+#, no-c-format
+msgid "En&coding:"
+msgstr "&Kodiranje:"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_device.ui line 129
+#: rc.cpp:1355 rc.cpp:1364
+#, no-c-format
+msgid ""
+"<qt>PalmOS devices are available in many different languages. If your device "
+"uses a different encoding than ISO-latin1 (ISO8859-1), select the correct "
+"encoding here, in order to display special characters correctly.</qt>"
+msgstr ""
+
+#. i18n: file ./kpilot/kpilotConfigDialog_device.ui line 137
+#: rc.cpp:1358
+#, no-c-format
+msgid "Pilot &user:"
+msgstr "&Korisnik Pilot-a:"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_device.ui line 162
+#: rc.cpp:1367
+#, no-c-format
+msgid "&Workarounds:"
+msgstr ""
+
+#. i18n: file ./kpilot/kpilotConfigDialog_device.ui line 171
+#: rc.cpp:1370
+#, fuzzy, no-c-format
+msgid "None"
+msgstr "&Nijedna"
+
+#. i18n: file ./kpilot/kpilotConfigDialog_device.ui line 176
+#: rc.cpp:1373
+#, no-c-format
+msgid "Zire 31, 72, Tungsten T5"
+msgstr ""
+
+#. i18n: file ./kpilot/kpilotConfigDialog_device.ui line 183
+#: rc.cpp:1376
+#, no-c-format
+msgid ""
+"<qt>Workarounds enable special handling for specific devices. Most devices do "
+"not need special handling. However, the Zire&tm; 31, Zire 72 and Tungsten T5 <i>"
+"do</i> have special needs, so if you are connecting such a device, please "
+"select the workaround for them.</qt>"
+msgstr ""
+
+#. i18n: file ./kpilot/dbSelection_base.ui line 23
+#: rc.cpp:1379
+#, no-c-format
+msgid "Database"
+msgstr "Baza podataka"
+
+#. i18n: file ./kpilot/dbSelection_base.ui line 60
+#: rc.cpp:1385
+#, no-c-format
+msgid "&Add"
+msgstr "&Dodaj"
+
+#. i18n: file ./kpilot/dbRecordEditor_base.ui line 89
+#: rc.cpp:1406
+#, no-c-format
+msgid "&Deleted"
+msgstr "&Obrisano"
+
+#. i18n: file ./kpilot/dbRecordEditor_base.ui line 97
+#: rc.cpp:1409
+#, no-c-format
+msgid "Busy"
+msgstr "Zauzeto"
+
+#~ msgid " The port does not exist."
+#~ msgstr " Port ne postoji."
+
+#, fuzzy
+#~ msgid " There is no such device."
+#~ msgstr " Ne postoji takav uređaj."
+
+#, fuzzy
+#~ msgid " You do not have permission to open the Pilot device."
+#~ msgstr " Nemate dozvolu za otvaranje Pilot-skog uređaja."
+
+#~ msgid " Check Pilot path and permissions."
+#~ msgstr " Provjerite Pilot-ovu putanju i dozvole."
+
+#~ msgid "Cannot open database"
+#~ msgstr "Ne mogu da otvorim bazu podataka"
+
+#~ msgid "Pilot database error"
+#~ msgstr "Greška u Pilot-ovoj bazi podataka"
+
+#~ msgid "Cannot create database %1 on the handheld"
+#~ msgstr "Ne mogu da napravim bazu podataka %1 na ručnom"
+
+#~ msgid "Device link ready."
+#~ msgstr "Veza sa uređajem je spremna."
+
+#~ msgid "(empty)"
+#~ msgstr "(prazno)"
+
+#, fuzzy
+#~ msgid "No DCOP connection could be made. The conduit cannot function without DCOP."
+#~ msgstr "DCOP link nije mogla da se uspostavi. Provod ne može ovako da funkcioniše."
+
+#~ msgid "KNotes is not running. The conduit must be able to make a DCOP connection to KNotes for synchronization to take place. Please start KNotes and try again."
+#~ msgstr "KNotes nije pokrenut. Provod mora biti u mogućnosti da uspostavi DCOP vezu sa KNotes-om da bi se sinhronizacija odigrala. Pokrenite KNotes i pokušajte ponovo."
+
+#, fuzzy
+#~ msgid "Creating local backup of databases in %1."
+#~ msgstr "Ne mogu da otvorim bazu podataka"
+
+#, fuzzy
+#~ msgid "FastSync"
+#~ msgstr "&Brzo sinhronizuj"
+
+#~ msgid "Exiting on cancel. All data not restored."
+#~ msgstr "Izlazim usljed otkazivanja. Nisu povraćeni svi podaci."
+
+#, fuzzy
+#~ msgid "Perl"
+#~ msgstr "Pejdžer"
+
+#, fuzzy
+#~ msgid "Python"
+#~ msgstr "Telefon"
+
+#, fuzzy
+#~ msgid "Python Conduit for KPilot"
+#~ msgstr "Provod KPilot-a za zadatke"
+
+#, fuzzy
+#~ msgid "Configures the Python Conduit for KPilot"
+#~ msgstr "Podešava se provod KPilot-a za zadatke"
+
+#, fuzzy
+#~ msgid "Cannot open file `%1' for restore."
+#~ msgstr "Ne mogu da otvorim za čitanje tekstualni datoteka %1."
+
+#~ msgid "&FastSync"
+#~ msgstr "&Brzo sinhronizuj"
+
+#, fuzzy
+#~ msgid "Next HotSync will be a FastSync."
+#~ msgstr "&Normalna sinhronizacija, napravi rezervnu kopiju"
+
+#~ msgid "Backup instead of list DBs"
+#~ msgstr "Rezervna kopija umjesto liste baza"
+
+#~ msgid "List available conduits"
+#~ msgstr "Izlistaj dostupne provode"
+
+#~ msgid "Reset"
+#~ msgstr "Resetuj"
+
+#, fuzzy
+#~ msgid "Perl-Conduit Options"
+#~ msgstr "Opcije nultog provoda"
+
+#, fuzzy
+#~ msgid "Python-Conduit Options"
+#~ msgstr "Opcije nultog provoda"
+
+#, fuzzy
+#~ msgid "ConfigWizard_base3"
+#~ msgstr "Dijalog za podešavanje provoda"
+
+#, fuzzy
+#~ msgid "Export..."
+#~ msgstr "Izvezi belešku..."
+
+#, fuzzy
+#~ msgid ""
+#~ "The following item was modified both on the Pilot and on your PC:\n"
+#~ "PC entry:\n"
+#~ "\t%1\n"
+#~ "Handheld entry:\n"
+#~ "\t%2\n"
+#~ "\n"
+#~ "Shall the entry from the handheld overwrite the PC entry? If you select \"No\", the PC entry will overwrite the Pilot entry."
+#~ msgstr ""
+#~ "\n"
+#~ "\n"
+#~ "Da li da stavka Pilot-a prebriše stavku PC-ja? Ako izaberete 'Ne', stavka PC-ja će prebrisati stavku Pilot-a."
+
+#~ msgid "&General"
+#~ msgstr "&Opšte"
+
+#, fuzzy
+#~ msgid "C&onflicts"
+#~ msgstr "Konflikti"
+
+#, fuzzy
+#~ msgid "Conduit flags: "
+#~ msgstr "Provod"
+
+#~ msgid "Setting the clock on the PC from the time on the handheld"
+#~ msgstr "Postavljam časovnik PC-ja prema vremenu na ručnom računaru"
+
+#~ msgid "Unknown setting for time synchronization."
+#~ msgstr "Nepoznata postavka za sinhronizaciju vremena."
+
+#~ msgid "The system clock was not adjusted to %1 (not implemented)"
+#~ msgstr "Sistemski časovnik nije podešen na %1 (nije implementirano)"
+
+#~ msgid ""
+#~ "\n"
+#~ "Pilot entry:\n"
+#~ "\t"
+#~ msgstr ""
+#~ "\n"
+#~ "Stavka Pilot-a:\n"
+#~ "\t"
+
+#~ msgid ""
+#~ "\n"
+#~ "\n"
+#~ "Should the Pilot entry overwrite the PC entry? If you select \"No\", the PC entry will overwrite the Pilot entry."
+#~ msgstr ""
+#~ "\n"
+#~ "\n"
+#~ "Da li da stavka Pilot-a prebriše stavku PC-ja? Ako izaberete 'Ne', stavka PC-ja će prebrisati stavku Pilot-a."
+
+#, fuzzy
+#~ msgid "Pilot device %1 does not exist. Assuming the device uses DevFS."
+#~ msgstr "Pilot-ski uređaj %1 ne postoji. Pretpostavlja se da uređaj koristi DevFS."
+
+#~ msgid "Form2"
+#~ msgstr "Form2"
+
+#, fuzzy
+#~ msgid "ConverterDlgBase"
+#~ msgstr "Konvertuj markere"
+
+#~ msgid "New memo cannot be deleted until HotSynced with pilot."
+#~ msgstr "Nova beleška ne može da se obriše dok se ne sinhronizuje sa Pilot-om."
+
+#~ msgid "Could not start KMail. The error message was: %1."
+#~ msgstr "Nisam mogao da pokrenem KMail. Poruka o grešci je: %1."
+
+#~ msgid "Kroupware syncing is enabled."
+#~ msgstr "Kroupware sinhronizacija je omogućena."
+
+#~ msgid "Synchronizing changes by the internal editors of KPilot:"
+#~ msgstr "Sinhronizujem izmjene pomoću unutrašnjih editora KPilot-a:"
+
+#~ msgid "ToDo"
+#~ msgstr "Zadatak"
+
+#, fuzzy
+#~ msgid "FullSync"
+#~ msgstr "Sinhronizuj"
+
+#~ msgid ""
+#~ "*.so|JPilot Plugins\n"
+#~ "*.*|All Files"
+#~ msgstr ""
+#~ "*.so|Dodaci JPilot-a\n"
+#~ "*.*|Svi datoteke"
+
+#~ msgid "Loading the JPilot plugin failed"
+#~ msgstr "Nije uspelo učitavanje dodatka JPilot-a."
+
+#~ msgid "Error finding the plugin in memory."
+#~ msgstr "Greška pri traženju dodatka u memoriji."
+
+#~ msgid "Configuring JPilot plugins has not yet been implemented. This would mean embedding a GtkWidget inside a TDE dialog box, so that the whole message loop of the modal dialog box needs to be rewritten (see QGtkApplication)"
+#~ msgstr "Podešavanje dodataka JPilot-a još uvijek nije implementirano. Ovo bi značilo umetanje GtkWidget-a unutar TDE-ovog dijaloga, tako da bi cela petlja poruke modalnog dijaloga morala da se ponovo napiše (pogledajte QGtkApplication)"
+
+#~ msgid "Change Plugin Folder"
+#~ msgstr "Promjeni direktorij dodataka"
+
+#~ msgid "Add Plugin Folder"
+#~ msgstr "Dodaj direktorij dodataka"
+
+#~ msgid "JPilotProxy Conduit for KPilot"
+#~ msgstr "JPilotProxy provod za KPilot-a"
+
+#~ msgid "Configures the JPilotProxy Conduit for KPilot"
+#~ msgstr "Podešava se JPilotProxy provod za KPilot-a"
+
+#~ msgid "Original author and maintainer of this conduit"
+#~ msgstr "Prvobitni autor i održavalac ovog provoda"
+
+#~ msgid "Author of JPilot"
+#~ msgstr "Autor JPilot-a"
+
+#~ msgid "User information"
+#~ msgstr "Informacije o korisniku"
+
+#~ msgid "Storage info (SD card, memory stick, ...)"
+#~ msgstr "Informacije o skladištu (SD kartica, memorijki štapić, ...)"
+
+#~ msgid "List of databases on handheld (takes long!)"
+#~ msgstr "Lista baza podataka na ručnom (za ovo treba dosta vremena!)"
+
+#~ msgid "Number of addresses, todos, events and memos"
+#~ msgstr "Broj adresa, zadataka, događaja i beležaka"
+
+#~ msgid "Version of KPilot, pilot-link and TDE"
+#~ msgstr "Verzija KPilot-a, pilot-ske veze i TDE-a"
+
+#~ msgid "Debug information (for KPilot developers)"
+#~ msgstr "Informacije za otklanjanje grešaka (za programere KPilot-a)"
+
+#~ msgid "Expense"
+#~ msgstr "Utrošak"
+
+#~ msgid ""
+#~ "_n: Synced one record.\n"
+#~ "Synced %n records."
+#~ msgstr ""
+#~ "Sinhronizovan %n slog.\n"
+#~ "Sinhronizovana %n sloga.\n"
+#~ "Sinhronizovano %n slogova."
+
+#~ msgid "Expense Conduit for KPilot"
+#~ msgstr "Provod KPilot-a za utroške"
+
+#~ msgid "Configures the Expense Conduit for KPilot"
+#~ msgstr "Konfiguriše se provod KPilot-a za utroške"
+
+#~ msgid "Unable to load configuration of the addressbook conduit."
+#~ msgstr "Ne mogu da učitam podešavanja adresarskog provoda."
+
+#~ msgid "Retrieve Mail"
+#~ msgstr "Dobavi poštu"
+
+#~ msgid "POP/Mail"
+#~ msgstr "POP/Pošta"
+
+#~ msgid "Password"
+#~ msgstr "Lozinka"
+
+#~ msgid "Send Method"
+#~ msgstr "Način slanja"
+
+#~ msgid "&Do not send mail"
+#~ msgstr "&Ne šalji poštu"
+
+#~ msgid "Use &sendmail"
+#~ msgstr "Kori&sti sendmail"
+
+#~ msgid "Use S&MTP"
+#~ msgstr "Koris&ti SMTP"
+
+#~ msgid "Use &KMail"
+#~ msgstr "Korist&i KMail"
+
+#~ msgid "Email address: "
+#~ msgstr "E-adresa: "
+
+#~ msgid "Signature file: "
+#~ msgstr "Fajl sa potpisom: "
+
+#~ msgid "Sendmail command:"
+#~ msgstr "Naredba sendmail-a:"
+
+#~ msgid "SMTP server:"
+#~ msgstr "SMTP server:"
+
+#~ msgid "SMTP port:"
+#~ msgstr "SMTP port:"
+
+#~ msgid "Firewall:"
+#~ msgstr "Zaštitni zid:"
+
+#~ msgid "Send mail through KMail immediately"
+#~ msgstr "Pošalji poštu kroz KMail odmah"
+
+#~ msgid "<qt>Check this box if you want the conduit to send all items in the outbox as soon as it is done, as if you clicked KMail's File->Send Queued menu item.</qt>"
+#~ msgstr "<qt>Popunite ovu kućicu ako želite da provod pošalje sve iz odlaznog sandučeta čim bude gotovo, kao da ste upotrebili KMail-ovu opciju Fajl -> Pošalji spremljene poruke.</qt>"
+
+#~ msgid "Signature File %1 is missing."
+#~ msgstr "Nedostaje datoteka sa potpisom %1."
+
+#~ msgid "Retrieve Method"
+#~ msgstr "Način dobavljanja"
+
+#~ msgid "Do &not receive mail"
+#~ msgstr "&Ne primaj poštu"
+
+#~ msgid "Use &POP3 server"
+#~ msgstr "Koristi POP3 &server"
+
+#~ msgid "Use &UNIX mailbox"
+#~ msgstr "Koristi UNIX-ovo &poštansko sanduče"
+
+#~ msgid "UNIX mailbox:"
+#~ msgstr "UNIX-ovo poštansko sanduče:"
+
+#~ msgid "POP server:"
+#~ msgstr "POP server:"
+
+#~ msgid "POP port:"
+#~ msgstr "POP port:"
+
+#~ msgid "POP username:"
+#~ msgstr "POP korisničko ime:"
+
+#~ msgid "&Leave mail on server"
+#~ msgstr "&Ostavi poštu na serveru."
+
+#~ msgid "POP password:"
+#~ msgstr "POP Šifra:"
+
+#~ msgid "Save &POP password"
+#~ msgstr "Sni&mi POP šifru"
+
+#~ msgid "Popmail"
+#~ msgstr "Popmail"
+
+#~ msgid "Error retrieving mail"
+#~ msgstr "Greška pri dobavljanju pošte"
+
+#~ msgid " (Timed out)"
+#~ msgstr " (Vrijeme je isteklo)"
+
+#~ msgid ""
+#~ "_n: Received one message\n"
+#~ "Received %n messages"
+#~ msgstr ""
+#~ "Primljena %n poruka\n"
+#~ "Primljene %n poruke\n"
+#~ "Primljeno %n poruka"
+
+#~ msgid ""
+#~ "\n"
+#~ "\n"
+#~ "POPMail conduit sent to SMTP server:\n"
+#~ msgstr ""
+#~ "\n"
+#~ "\n"
+#~ "POPMail provod poslat SMTP serveru:\n"
+
+#~ msgid ""
+#~ "\n"
+#~ "SMTP server responded with:\n"
+#~ msgstr ""
+#~ "\n"
+#~ "SMTP server je odgovorio sa:\n"
+
+#~ msgid "Cannot connect to SMTP server"
+#~ msgstr "Ne mogu da se povežem sa SMTP serverom"
+
+#~ msgid "SMTP server failed to announce itself"
+#~ msgstr "SMTP server se nije oglasio"
+
+#~ msgid "Couldn't EHLO to SMTP server"
+#~ msgstr "Nisam mogao da izvršim EHLO na SMTP serveru"
+
+#~ msgid "Couldn't start sending new mail."
+#~ msgstr "Nisam mogao da počnem sa slanjem nove pošte."
+
+#~ msgid "The recipient doesn't exist!"
+#~ msgstr "Primalac ne postoji!"
+
+#~ msgid "Unable to start writing mail body\n"
+#~ msgstr "Ne mogu da počnem da zapisujem tijelo pošte\n"
+
+#~ msgid "Unable to send message"
+#~ msgstr "Nisam mogao da pošaljem poruku."
+
+#~ msgid "QUIT command to SMTP server failed.\n"
+#~ msgstr "Naredba QUIT na SMTP serveru nije uspela.\n"
+
+#~ msgid "Error reading message"
+#~ msgstr "Greška pri čitanju poruke"
+
+#~ msgid "Error writing message to the Pilot."
+#~ msgstr "Greška pri upisu poruke u Pilot-a."
+
+#~ msgid "Please enter your POP password:"
+#~ msgstr "Unesite vašu POP šifru:"
+
+#~ msgid "Error writing mail message to Pilot"
+#~ msgstr "Greška pri upisu poštanske poruke u Pilot-a."
+
+#~ msgid "<qt>Select a conduit in the list to configure it. Checked conduits will be run during a HotSync.</qt>"
+#~ msgstr "<qt>Izaberite provod iz liste da biste ga podesili. Uključeni provodi biće pokrenuti tokom vruće sinhronizacije.</qt>"
+
+#~ msgid "<qt>The conduit <i>%1</i> is an old-style conduit. To configure it, click the configure button below.</qt>"
+#~ msgstr "<qt>Provod <i>%1</i> je provod zastarelog tipa. Da biste ga podesili, kliknite na dugme za podešavanje dole.</qt>"
+
+#~ msgid "External Conduit Setup"
+#~ msgstr "Podešavanje spoljnog provoda"
+
+#~ msgid "Activate"
+#~ msgstr "Aktiviraj"
+
+#~ msgid "Deactivate"
+#~ msgstr "Deaktiviraj"
+
+#~ msgid "Active"
+#~ msgstr "Aktivan"
+
+#~ msgid "Conduits that will run when a HotSync is done"
+#~ msgstr "Provodi koji će biti pokrenuti nakon završetka vruće sinhronizacije"
+
+#~ msgid "Conduits installed on your system but not active"
+#~ msgstr "Provodi koji su instalirani na vašem sistemu ali nisu aktivni"
+
+#~ msgid ""
+#~ "You can drag and drop conduits between the\n"
+#~ "active and available groups. Only the conduits\n"
+#~ "in the active group will run when you do a HotSync."
+#~ msgstr ""
+#~ "Možete prevlačiti provode između grupa aktivnih\n"
+#~ "i dostupnih. Samo provodi koji su u aktivnoj grupi\n"
+#~ "biće pokrenuti kada radite vruću sinhronizaciju."
+
+#~ msgid ""
+#~ "The conduit %1 did not identify what database it supports. \n"
+#~ "Please check with the conduits author to correct it."
+#~ msgstr ""
+#~ "Provod %1 nije obznanio koju bazu podataka podržava. \n"
+#~ "Provjerite sa autorom provoda kako ovo da se ispravi."
+
+#~ msgid "No executable could be found for the conduit %1."
+#~ msgstr "Nije pronađen izvršni datoteka provoda %1."
+
+#~ msgid "A conduit is already being set up. Please complete that action before setting up another conduit."
+#~ msgstr "Provod je već u procesu podešavanja. Završite tu akciju pre nego što pokrenete podešavanje drugog provoda."
+
+#~ msgid "Conduit Setup Error"
+#~ msgstr "Greška pri podešavanju provoda"
+
+#~ msgid "&Configure Conduits..."
+#~ msgstr "&Podesi provode..."
+
+#~ msgid "<qt>%1<br/>%2</qt>"
+#~ msgstr "<qt>%1<br/>%2</qt>"
+
+#~ msgid "Dummy command line argument."
+#~ msgstr "Lažni argument komandne linije."
+
+#~ msgid ""
+#~ "Changing the AppInfo block might corrupt the whole database. \n"
+#~ "\n"
+#~ "Really assign the new AppInfo block?"
+#~ msgstr ""
+#~ "Izmenom info-bloka cela baza podataka može da se pokvari. \n"
+#~ "\n"
+#~ "Želite li zaista da dodijelite novi info-blok?"
+
+#~ msgid "Changing AppInfo Block"
+#~ msgstr "Menjam info-blok programa"
+
+#~ msgid "Configure conduits instead."
+#~ msgstr "Umjesto toga, podesi provode."
+
+#~ msgid "KPilot Configurator"
+#~ msgstr "Podešavač KPilot-a"
+
+#~ msgid "Backing up Pilot. "
+#~ msgstr "Pravim rezervnu kopiju Pilot-a. "
+
+#~ msgid "Restoring Pilot. "
+#~ msgstr "Vraćam Pilot-a iz rezervne kopije."
+
+#~ msgid "HotSyncing. "
+#~ msgstr "Vruće sinhronizujem. "
+
+#~ msgid "FastSyncing. "
+#~ msgstr "Brzo sinhronizujem. "
+
+#~ msgid "C&onfigure Conduits..."
+#~ msgstr "P&odesi provode..."
+
+#~ msgid "Form1"
+#~ msgstr "Form1"
+
+#~ msgid "Plugins"
+#~ msgstr "Dodaci"
+
+#~ msgid "Plugin Name"
+#~ msgstr "Ime dodatka"
+
+#~ msgid "Plugin File Name"
+#~ msgstr "Ime datoteke dodatka"
+
+#~ msgid "&Add Plugin..."
+#~ msgstr "&Dodaj dodatak..."
+
+#~ msgid "JPilot plugin folders:"
+#~ msgstr "Direktorijumi dodataka JPilot-a:"
+
+#~ msgid "&Scan Plugin Folders"
+#~ msgstr "&Skeniraj direktorije dodataka"
+
+#~ msgid "&..."
+#~ msgstr "&..."
+
+#~ msgid "&+"
+#~ msgstr "&+"
+
+#~ msgid "&-"
+#~ msgstr "&-"
+
+#~ msgid "Plugin Settings"
+#~ msgstr "Postavke podataka"
+
+#~ msgid "CSV Export"
+#~ msgstr "CSV izvoz"
+
+#~ msgid "CSV filename:"
+#~ msgstr "Ime CSV datoteke:"
+
+#~ msgid "<qt>Full path to csv file containing expense data</qt>"
+#~ msgstr "<qt>Puna putanja do CSV datoteke koji sadrži podatke o troškovima</qt>"
+
+#~ msgid "Rotate Policy"
+#~ msgstr "Rotiraj polisu"
+
+#~ msgid "<qt>For an explanation of these options, please read the documentation!</qt>"
+#~ msgstr "<qt>Za objašnjenje ovih opcija pročitajte dokumentaciju!</qt>"
+
+#~ msgid "&Rotate"
+#~ msgstr "&Rotiraj:"
+
+#~ msgid "Rotate depth:"
+#~ msgstr "Dubina rotiranja:"
+
+#~ msgid "&Append"
+#~ msgstr "&Prikači"
+
+#~ msgid "Database Export"
+#~ msgstr "Izvoz baze podataka"
+
+#~ msgid "DB table:"
+#~ msgstr "Tabela baze:"
+
+#~ msgid "DB name:"
+#~ msgstr "Ime baze:"
+
+#~ msgid "DB passwd:"
+#~ msgstr "Lozinka baze:"
+
+#~ msgid "DB login:"
+#~ msgstr "Prijava u bazu:"
+
+#~ msgid "DB server:"
+#~ msgstr "Server baze:"
+
+#~ msgid "<qt>Name of the database, like Expenses</qt>"
+#~ msgstr "<qt>Ime baze podataka, kao Expenses</qt>"
+
+#~ msgid "username"
+#~ msgstr "korisničko ime"
+
+#~ msgid "<qt>Password, not echoed to the screen!</qt>"
+#~ msgstr "<qt>Lozinka, ne prikazuje se na ekranu!</qt>"
+
+#~ msgid "Database Type"
+#~ msgstr "Vrsta baze podataka"
+
+#~ msgid "&PostgreSQL"
+#~ msgstr "&PostgreSQL"
+
+#~ msgid "&MySQL"
+#~ msgstr "&MySQL"
+
+#~ msgid "foo.bar.com"
+#~ msgstr "foo.bar.com"
+
+#~ msgid "<qt>Name of the table to update, like UsernameExpenses</qt>"
+#~ msgstr "<qt>Ime tabele koju treba osvježiti, kao UsernameExpenses</qt>"
+
+#~ msgid "<qt>Use this carefully</qt>"
+#~ msgstr "<qt>Koristite ovo oprezno</qt>"
+
+#~ msgid "<qt>Synchronize the handheld with an addressbook different from TDE's addressbook. You need to give the filename of the vcard file.</qt>"
+#~ msgstr "<qt>Ručni računar se sinhronizuje sa adresarom različitim od TDE-ovog adresara. Morate navesti ime VCard datoteke u kojem je adresar.</qt>"
+
+#~ msgid "<qt>Path to the addressbook file (in vcard format)</qt>"
+#~ msgstr "<qt>Putanja do datoteke adresara (koji je u VCard formatu)</qt>"
+
+#~ msgid "Check if you want to have the .pdb files somewhere on your PC's harddisk."
+#~ msgstr "Popunite ako želite da imate .pdb datoteke negdje na disku PC-ja."
+
+#~ msgid "Sync only changes to the texts on the PC to the handheld. If you changed the texts on the handheld, the changes will not be copied to the PC."
+#~ msgstr "Sinhronizuju se samo promjene u tekstovima na PC-ju ka ručnom računaru. Ako ste izmijenili tekstove na ručnom računaru, te izmjene neće biti kopirane na PC."
+
+#~ msgid "Only sync changes made on the handheld to the PC. Changes to the text files on the PC will not be committed to the handheld."
+#~ msgstr "Sinhronizuju se samo promjene u tekstovima na ručnom računaru ka PC-ju. Ako ste izmijenili tekstove na PC-ju, te izmjene neće biti kopirane na ručni računar."
+
+#~ msgid "Enter the path of your .signature file here. The signature is added to the end of mail messages."
+#~ msgstr "Unesite ovdje putanju vašeg datoteke sa potpisom. Potpis se dodaje na kraj svake e-poruke."
+
+#~ msgid "Enter the hostname and port number (usually 25) of your SMTP server, separated by colons, e.g. <i>smtp.mydomain.com:25</i>."
+#~ msgstr "Unesite ime domaćina i broj porta (obično je to 25) SMTP servera, odvojene dvotačkom, npr. <i>smtp.mydomain.com:25</i>."
+
+#~ msgid "Sendmail:"
+#~ msgstr "Sendmail:"
+
+#~ msgid "/usr/lib/sendmail -t -i"
+#~ msgstr "/usr/lib/sendmail -t -i"
+
+#~ msgid "Enter the command used to execute sendmail on your system."
+#~ msgstr "Unesite naredbu za pokretanje sendmail-a na vašem sistemu."
+
+#~ msgid "Use Sendmail"
+#~ msgstr "Koristi Sendmail"
+
+#~ msgid "Use SMTP"
+#~ msgstr "Koristi SMTP"
+
+#~ msgid "Receive method:"
+#~ msgstr "Način primanja:"
+
+#~ msgid "pop:110"
+#~ msgstr "pop:110"
+
+#~ msgid "Do Not Receive Mail"
+#~ msgstr "Ne primaj poštu"
+
+#~ msgid "Use POP3 Server"
+#~ msgstr "Koristi POP3 server"
+
+#~ msgid "Use System Mailbox"
+#~ msgstr "Koristi sistemsko poštansko sanduče"
+
+#~ msgid "System mailbox:"
+#~ msgstr "Sistemsko poštansko sanduče:"
+
+#~ msgid "Use a specific calendar file, not necessarily the one the TDE calendar uses."
+#~ msgstr "Koristi se poseban kalendarski datoteka, ne obavezno onaj koji koristi TDE-ov kalendar."
+
+#~ msgid "<qt>Path to a calendar file (iCalendar or vCalendar format) for the sync. This does not necessarily have to be the file KOrganizer uses.</qt>"
+#~ msgstr "<qt>Putanja do kalendarskog datoteke (koji je u iCalendar ili vCalendar formatu) za sinhronizaciju. Ovo ne mora obavezno da bude datoteka koji koristi KOrganizer.</qt>"
+
+#~ msgid ""
+#~ "Here you can select the action to take if an event was modified on both\n"
+#~ "the handheld and the PC. This does <i>not</i> handle double-scheduling\n"
+#~ "conflicts."
+#~ msgstr ""
+#~ "Ovdje možete izabrati akciju koja bi trebalo da se preduzme u slučaju da\n"
+#~ "je događaj izmenjen i na ručnom računaru i na PC-ju. Ovim se <i>ne</i> rešavaju\n"
+#~ "konflikti duplih zakazivanja."
+
+#~ msgid "<qt>This box lets you select the encoding that your Pilot uses. If your Pilot accepts input in one of the languages listed, choose it. If your Pilot is a European or North American model, choose Western (ISO8859-1).</qt>"
+#~ msgstr "<qt>Ovdje možete izabrati kodiranje koje vaš Pilot koristi. Ako prihvata ulaz na jednom od ponuđenih jezika, izaberite taj jezik. Ako je vaš Pilot severnoevropski ili severnoamerički model, izaberite Zapadno (ISO8859-1).</qt>"
+
+#~ msgid "<qt>Sets the speed of the connection to your Pilot. This is only important for serial devices.</qt>"
+#~ msgstr "<qt>Postavlja se brzina veze sa vašim Pilot-om. Ovo je bitno samo za serijske uređaje.</qt>"
+
+#~ msgid "S&ync"
+#~ msgstr "S&inhronizuj"
+
+#~ msgid "Sync Mode"
+#~ msgstr "Režim sinhronizacije"
+
+#~ msgid "Full Sync (slow), backup"
+#~ msgstr "Puna sinhronizacija (sporo), pravljenje rezervne kopije"
+
+#~ msgid "We really don't know what this does."
+#~ msgstr "Stvarno ne znamo šta ovo radi."
+
+#~ msgid "<qt>Records that are marked &quot;Private&quot; in the Pilot are displayed by KPilot only when this box is checked.</qt>"
+#~ msgstr "<qt>Slogovi na Pilot-u koji su označeni kao 'privatni' biće prikazani u KPilot-u samo ako je ova kućica popunjena.</qt>"
+
+#~ msgid "<qt>Databases listed here are only backed up, not synced.</qt>"
+#~ msgstr "<qt>Ovdje izlistanim bazama podataka samo su napravljene rezervne kopije, nisu sinhronizovane.</qt>"
+
+#~ msgid "<qt>Databases listed here are neither backed up, nor synced.</qt>"
+#~ msgstr "<qt>Ovdje izlistanim bazama podataka niti su napravljene rezervne kopije, niti nisu sinhronizovane.</qt>"
+
+#~ msgid "<qt>Select a conduit in the list above to configure it. Checked conduits will be run during a HotSync.</qt>"
+#~ msgstr "<qt>Izaberite provod iz liste da biste ga podesili. Uključeni provodi biće pokrenuti tokom vruće sinhronizacije.</qt>"
+
+#~ msgid ""
+#~ "This is an old-style conduit.\n"
+#~ "To configure it, click the\n"
+#~ "configure button below."
+#~ msgstr ""
+#~ "Ovo je provod zastarelog tipa.\n"
+#~ "Da biste ga podesili, kliknite\n"
+#~ "na dugme Podesi dole."
+
+#~ msgid "<p align=\"center\">This conduit appears to be broken and cannot be configured.</p>"
+#~ msgstr "<p align=\"center\">Ovaj provod je izgleda pokvaren i ne može da se konfiguriše.</p>"