Remove the original translation directory layout.r14.1.0

Signed-off-by: Slávek Banko <slavek.banko@axis.cz>

1 files changed, 0 insertions, 6640 deletions

diff --git a/po/tr.po b/po/tr.po
deleted file mode 100644
index 94a66e2..0000000
--- a/po/tr.po
+++ /dev/null
@@ -1,6640 +0,0 @@
-# translation of kpilot.po to Türkçe
-# translation of kpilot.po to
-# translation of kpilot.po to Turkish
-# Copyright (C) 2003,2004 Free Software Foundation, Inc
-# Görkem Çetin <gorkem@kde.org>, 2002,2003.
-# Engin ÇAĞATAY <engincagatay@yahoo.com>, 2004.
-# Serdar Soytetir <tulliana@gmail.com>, 2008.
-msgid ""
-msgstr ""
-"Project-Id-Version: kpilot\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2021-07-07 18:32+0000\n"
-"PO-Revision-Date: 2008-02-28 23:55+0200\n"
-"Last-Translator: Serdar Soytetir <tulliana@gmail.com>\n"
-"Language-Team: Turkish <kde-i18n-doc@lists.kde.org>\n"
-"Language: tr\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: LoKalize 0.2\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-#. Instead of a literal translation, add your name to the end of the list (separated by a comma).
-msgid ""
-"_: NAME OF TRANSLATORS\n"
-"Your names"
-msgstr "Serdar Soytetir"
-
-#. Instead of a literal translation, add your email to the end of the list (separated by a comma).
-msgid ""
-"_: EMAIL OF TRANSLATORS\n"
-"Your emails"
-msgstr "tulliana@gmail.com"
-
-#: Documentation/ConduitProgrammingTutorial/mal-factory.cpp:50
-#: conduits/malconduit/mal-factory.cpp:70
-msgid "MAL Synchronization Conduit for KPilot"
-msgstr "KPilot için MAL Senkronizasyon Kanalı"
-
-#: Documentation/ConduitProgrammingTutorial/mal-factory.cpp:52
-#: conduits/malconduit/mal-factory.cpp:72
-msgid "Synchronizes the content from MAL Servers like AvantGo to the Handheld"
-msgstr ""
-
-#: Documentation/ConduitProgrammingTutorial/mal-factory.cpp:56
-#: conduits/abbrowserconduit/abbrowser-setup.cpp:54
-#: conduits/knotes/knotes-factory.cpp:73 conduits/malconduit/mal-factory.cpp:76
-#: conduits/memofileconduit/memofile-factory.cpp:69
-#: conduits/notepadconduit/notepad-factory.cpp:73
-#: conduits/null/null-factory.cpp:71 conduits/recordconduit/factory.cpp:72
-#: conduits/sysinfoconduit/sysinfo-setup.cpp:101
-#: conduits/timeconduit/time-setup.cpp:54
-msgid "Primary Author"
-msgstr "Asıl Yazar"
-
-#: Documentation/ConduitProgrammingTutorial/mal-factory.cpp:58
-#: conduits/malconduit/mal-factory.cpp:78
-msgid "Author of libmal and the JPilot AvantGo conduit"
-msgstr "libmal ve JPilot AvantGo bağlantısının yazarı"
-
-#: Documentation/ConduitProgrammingTutorial/mal-factory.cpp:60
-#: conduits/malconduit/mal-factory.cpp:80
-msgid "Author of syncmal"
-msgstr ""
-
-#: Documentation/ConduitProgrammingTutorial/mal-factory.cpp:62
-#: conduits/malconduit/mal-factory.cpp:82
-msgid "Authors of the malsync library (c) 1997-1999"
-msgstr "Malsync kitaplığının yazarları (c) 1997-1999"
-
-#: conduits/abbrowserconduit/abbrowser-conduit.cpp:125
-#: conduits/abbrowserconduit/abbrowser-setup.cpp:71
-msgid "Addressbook"
-msgstr "Adres Defteri"
-
-#: conduits/abbrowserconduit/abbrowser-conduit.cpp:291
-#: conduits/vcalconduit/vcal-conduitbase.cpp:298
-msgid ""
-"You chose to sync with the file \"%1\", which cannot be opened. Please make "
-"sure to supply a valid file name in the conduit's configuration dialog. "
-"Aborting the conduit."
-msgstr ""
-
-#: conduits/abbrowserconduit/abbrowser-conduit.cpp:327
-#: conduits/abbrowserconduit/abbrowser-conduit.cpp:328
-msgid "Unable to initialize and load the addressbook for the sync."
-msgstr ""
-
-#: conduits/abbrowserconduit/abbrowser-conduit.cpp:340
-#: conduits/abbrowserconduit/abbrowser-conduit.cpp:341
-msgid "Unable to lock addressbook for writing.  Can't sync!"
-msgstr ""
-
-#: conduits/abbrowserconduit/abbrowser-conduit.cpp:396
-msgid ""
-"An error occurred while uploading \"%1\". You can try to upload the "
-"temporary local file \"%2\" manually"
-msgstr ""
-
-#: conduits/abbrowserconduit/abbrowser-conduit.cpp:518
-msgid "Unable to open the addressbook databases on the handheld."
-msgstr ""
-
-#: conduits/abbrowserconduit/abbrowser-conduit.cpp:539
-msgid "Unable to open the addressbook."
-msgstr ""
-
-#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1526
-msgid "Item on PC"
-msgstr ""
-
-#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1527
-#: conduits/vcalconduit/vcal-conduitbase.cpp:438 lib/plugin.cpp:308
-msgid "Handheld"
-msgstr ""
-
-#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1528
-msgid "Last sync"
-msgstr ""
-
-#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1549
-msgid "Last name"
-msgstr "Soyadı"
-
-#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1550
-msgid "First name"
-msgstr "İlk Ad"
-
-#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1551
-msgid "Organization"
-msgstr "Kurum"
-
-#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1552
-msgid "Title"
-msgstr "Ünvanı"
-
-#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1553
-msgid "Note"
-msgstr "Not"
-
-#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1555
-msgid "Custom 1"
-msgstr "Özel 1"
-
-#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1556
-msgid "Custom 2"
-msgstr "Özel 2"
-
-#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1557
-msgid "Custom 3"
-msgstr "Özel 3"
-
-#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1558
-msgid "Custom 4"
-msgstr "Özel 4"
-
-#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1560
-msgid "Work Phone"
-msgstr "İş Telefonu"
-
-#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1561
-msgid "Home Phone"
-msgstr "Ev Telefonu"
-
-#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1562
-msgid "Mobile Phone"
-msgstr "Cep Telefonu"
-
-#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1563
-msgid "Fax"
-msgstr "Faks"
-
-#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1564
-msgid "Pager"
-msgstr ""
-
-#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1565
-msgid "Other"
-msgstr "Diğer"
-
-#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1566
-msgid "Email"
-msgstr "E-posta"
-
-#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1569
-msgid "Address"
-msgstr "Adres"
-
-#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1570
-msgid "City"
-msgstr "Şehir"
-
-#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1571
-msgid "Region"
-msgstr "Bölge"
-
-#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1572
-msgid "Postal code"
-msgstr "Posta kodu"
-
-#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1573
-msgid "Country"
-msgstr "Ülke"
-
-#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1587 kpilot/listCat.cpp:84
-msgid "Category"
-msgstr "Kategori"
-
-#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1752
-msgid ""
-"The following address entry was changed, but does no longer exist on the "
-"handheld. Please resolve this conflict:"
-msgstr ""
-
-#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1756
-msgid ""
-"The following address entry was changed, but does no longer exist on the PC. "
-"Please resolve this conflict:"
-msgstr ""
-
-#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1760
-msgid ""
-"The following address entry was changed on the handheld as well as on the PC "
-"side. The changes could not be merged automatically, so please resolve the "
-"conflict yourself:"
-msgstr ""
-
-#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1762
-msgid "Address conflict"
-msgstr "Adres çakışması"
-
-#: conduits/abbrowserconduit/abbrowser-setup.cpp:48
-msgid "Abbrowser Conduit for KPilot"
-msgstr ""
-
-#: conduits/abbrowserconduit/abbrowser-setup.cpp:50
-msgid "Configures the Abbrowser Conduit for KPilot"
-msgstr ""
-
-#: conduits/abbrowserconduit/abbrowser-setup.cpp:56
-#: conduits/abbrowserconduit/abbrowser-setup.cpp:59
-#: conduits/docconduit/doc-factory.cpp:68 conduits/popmail/setupDialog.cpp:74
-#: conduits/vcalconduit/todo-setup.cpp:59
-#: conduits/vcalconduit/todo-setup.cpp:63
-#: conduits/vcalconduit/vcal-setup.cpp:50
-#: conduits/vcalconduit/vcal-setup.cpp:54 kpilot/kpilot.cpp:1027
-#: kpilot/pilotDaemon.cpp:1323
-msgid "Maintainer"
-msgstr "Yönetici"
-
-#: conduits/abbrowserconduit/abbrowser-setup.cpp:61
-#: conduits/knotes/knotes-factory.cpp:77
-msgid "UI"
-msgstr "UI"
-
-#: conduits/abbrowserconduit/resolutionDialog.cpp:162
-msgid ""
-"_: Entries in the resolution dialog. First the name of the field, then the "
-"entry from the Handheld or PC after the colon\n"
-"%1: %2"
-msgstr ""
-
-#: conduits/abbrowserconduit/resolutionDialog.cpp:164
-msgid ""
-"_: Denoting newlines in Address entries. No need to translate\n"
-" | "
-msgstr " | "
-
-#: conduits/abbrowserconduit/resolutionDialog.cpp:214
-#: conduits/abbrowserconduit/resolutionDialog.cpp:220
-msgid "Delete entry"
-msgstr "Girdiyi silGirdiyi Sil"
-
-#: conduits/docconduit/DOC-converter.cpp:198
-msgid "Unable to open text file %1 for reading."
-msgstr ""
-
-#: conduits/docconduit/DOC-converter.cpp:383
-msgid "Unable to open Database for writing"
-msgstr ""
-
-#: conduits/docconduit/DOC-converter.cpp:440
-#, c-format
-msgid "Unable to open palm doc database %1"
-msgstr ""
-
-#: conduits/docconduit/DOC-converter.cpp:510
-msgid "No filename set for the conversion"
-msgstr ""
-
-#: conduits/docconduit/DOC-converter.cpp:515
-msgid "Unable to open Database for reading"
-msgstr "Veritabanı okumak için açılamadı"
-
-#: conduits/docconduit/DOC-converter.cpp:523
-#, c-format
-msgid "Unable to read database header for database %1."
-msgstr ""
-
-#: conduits/docconduit/DOC-converter.cpp:543
-#, c-format
-msgid "Unable to open output file %1."
-msgstr ""
-
-#: conduits/docconduit/DOC-converter.cpp:558
-msgid "Could not read text record #%1 from Database %2"
-msgstr ""
-
-#: conduits/docconduit/DOC-converter.cpp:577
-msgid "Could not read bookmark record #%1 from Database %2"
-msgstr ""
-
-#: conduits/docconduit/DOC-converter.cpp:594
-msgid "Unable to open file %1 for the bookmarks of %2."
-msgstr ""
-
-#: conduits/docconduit/doc-conduit.cpp:84
-msgid "DOC"
-msgstr ""
-
-#: conduits/docconduit/doc-conduit.cpp:272
-msgid "Searching for texts and databases to synchronize"
-msgstr ""
-
-#: conduits/docconduit/doc-conduit.cpp:332
-msgid "Database created."
-msgstr "Veritabanı oluşturuldu."
-
-#: conduits/docconduit/doc-conduit.cpp:380
-msgid "Unable to install the locally created PalmDOC %1 to the handheld."
-msgstr ""
-
-#: conduits/docconduit/doc-conduit.cpp:383
-msgid "Conversion of PalmDOC \"%1\" failed."
-msgstr ""
-
-#: conduits/docconduit/doc-conduit.cpp:391
-#, c-format
-msgid "Unable to open or create the database %1."
-msgstr "%1 veritabanı açılamadı ya da oluşturulamadı."
-
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:147
-#: conduits/docconduit/doc-conduit.cpp:625
-#: conduits/docconduit/doc-setupdialog.ui:401
-#, no-c-format
-msgid "Conflict Resolution"
-msgstr ""
-
-#: conduits/docconduit/doc-conduit.cpp:630
-msgid "Sync aborted by user."
-msgstr ""
-
-#: conduits/docconduit/doc-conduit.cpp:668
-msgid "Synchronizing text \"%1\""
-msgstr ""
-
-#: conduits/docconduit/doc-conflictdialog.cpp:53
-msgid ""
-"Here is a list of all text files and DOC databases the conduit found. The "
-"conduit tried to determine the correct sync direction, but for databases in "
-"bold red letters a conflict occurred (i.e. the text was changed both on the "
-"desktop and on the handheld). For these databases please specify which "
-"version is the current one."
-msgstr ""
-
-#: conduits/docconduit/doc-conflictdialog.cpp:57
-msgid ""
-"You can also change the sync direction for databases without a conflict."
-msgstr ""
-
-#: conduits/docconduit/doc-conflictdialog.cpp:61
-msgid "DOC Databases"
-msgstr ""
-
-#: conduits/docconduit/doc-conflictdialog.cpp:106
-msgid "No Sync"
-msgstr "Senkronizasyon Yok"
-
-#: conduits/docconduit/doc-conflictdialog.cpp:107
-msgid "Sync Handheld to PC"
-msgstr ""
-
-#: conduits/docconduit/doc-conflictdialog.cpp:108
-msgid "Sync PC to Handheld"
-msgstr ""
-
-#: conduits/docconduit/doc-conflictdialog.cpp:109
-msgid "Delete Both Databases"
-msgstr ""
-
-#: conduits/docconduit/doc-conflictdialog.cpp:113
-msgid "More Info..."
-msgstr "Daha Fazla Bilgi..."
-
-#: conduits/docconduit/doc-conflictdialog.cpp:155
-msgid "unchanged"
-msgstr "değiştirilmemiş"
-
-#: conduits/docconduit/doc-conflictdialog.cpp:156
-msgid "new"
-msgstr "yeni"
-
-#: conduits/docconduit/doc-conflictdialog.cpp:157
-msgid "changed"
-msgstr "değiştirilmiş"
-
-#: conduits/docconduit/doc-conflictdialog.cpp:158
-msgid "only bookmarks changed"
-msgstr ""
-
-#: conduits/docconduit/doc-conflictdialog.cpp:159
-msgid "deleted"
-msgstr ""
-
-#: conduits/docconduit/doc-conflictdialog.cpp:160
-msgid "does not exist"
-msgstr "mevcut değil"
-
-#: conduits/docconduit/doc-conflictdialog.cpp:161
-#: conduits/sysinfoconduit/sysinfo-conduit.cpp:207
-#: conduits/sysinfoconduit/sysinfo-conduit.cpp:404
-#: conduits/sysinfoconduit/sysinfo-conduit.cpp:405
-#: conduits/sysinfoconduit/sysinfo-conduit.cpp:406
-#: conduits/sysinfoconduit/sysinfo-conduit.cpp:407
-msgid "unknown"
-msgstr "bilinmeyen"
-
-#: conduits/docconduit/doc-conflictdialog.cpp:171
-msgid ""
-"Status of the database %1:\n"
-"\n"
-msgstr ""
-
-#: conduits/docconduit/doc-conflictdialog.cpp:172
-msgid "Handheld: %1\n"
-msgstr ""
-
-#: conduits/docconduit/doc-conflictdialog.cpp:173
-msgid "Desktop: %1\n"
-msgstr "Masaüstü: %1\n"
-
-#: conduits/docconduit/doc-conflictdialog.cpp:175
-msgid "Database information"
-msgstr "Veritabanı bilgisi"
-
-#: conduits/docconduit/doc-conflictdialog.h:60
-msgid "Resolution Dialog"
-msgstr ""
-
-#: conduits/docconduit/doc-factory.cpp:63
-msgid "Palm DOC Conduit for KPilot"
-msgstr ""
-
-#: conduits/docconduit/doc-factory.cpp:64
-msgid "Configures the DOC Conduit for KPilot"
-msgstr ""
-
-#: conduits/docconduit/doc-setup.cpp:64
-msgid "Palm DOC"
-msgstr "Palm DOC"
-
-#: conduits/docconduit/kpalmdoc.cpp:42
-msgid "KPalmDOC"
-msgstr "KPalmDOC"
-
-#: conduits/docconduit/kpalmdoc.cpp:45
-msgid "Main Developer"
-msgstr "Ana Geliştirici"
-
-#: conduits/docconduit/kpalmdoc.cpp:47
-msgid "Maintainer of KPilot"
-msgstr "KPilot Yazarı"
-
-#: conduits/docconduit/kpalmdoc.cpp:54
-msgid "PalmDOC Converter"
-msgstr ""
-
-#: conduits/docconduit/kpalmdoc_dlg.cpp:178
-#: conduits/docconduit/kpalmdoc_dlg.cpp:214
-#: conduits/docconduit/kpalmdoc_dlg.cpp:327
-#: conduits/docconduit/kpalmdoc_dlg.cpp:352
-msgid ""
-"<qt>You selected to sync folders, but gave a filename instead (<em>%1</em>)."
-"<br>Use folder <em>%2</em> instead?</qt>"
-msgstr ""
-
-#: conduits/docconduit/kpalmdoc_dlg.cpp:181
-#: conduits/docconduit/kpalmdoc_dlg.cpp:217
-#: conduits/docconduit/kpalmdoc_dlg.cpp:330
-#: conduits/docconduit/kpalmdoc_dlg.cpp:356
-msgid "Use Folder"
-msgstr "Dizini Kullan"
-
-#: conduits/docconduit/kpalmdoc_dlg.cpp:194
-msgid ""
-"<qt>The folder <em>%1</em> for the handheld database files is not a valid "
-"folder.</qt>"
-msgstr ""
-
-#: conduits/docconduit/kpalmdoc_dlg.cpp:203
-msgid ""
-"<qt>The folder <em>%1</em> for the handheld database files is not a valid "
-"directory.</qt>"
-msgstr ""
-
-#: conduits/docconduit/kpalmdoc_dlg.cpp:231
-msgid ""
-"<qt>The folder <em>%1</em> for the text files could not be created.</qt>"
-msgstr ""
-
-#: conduits/docconduit/kpalmdoc_dlg.cpp:254
-#: conduits/docconduit/kpalmdoc_dlg.cpp:392
-msgid "The following texts were successfully converted:"
-msgstr ""
-
-#: conduits/docconduit/kpalmdoc_dlg.cpp:255
-#: conduits/docconduit/kpalmdoc_dlg.cpp:393
-msgid "Conversion Successful"
-msgstr "Çevrim Başarılı"
-
-#: conduits/docconduit/kpalmdoc_dlg.cpp:259
-#: conduits/docconduit/kpalmdoc_dlg.cpp:397
-msgid "No text files were converted correctly"
-msgstr ""
-
-#: conduits/docconduit/kpalmdoc_dlg.cpp:269
-#: conduits/docconduit/kpalmdoc_dlg.cpp:407
-msgid "<qt>The file <em>%1</em> does not exist.</qt>"
-msgstr ""
-
-#: conduits/docconduit/kpalmdoc_dlg.cpp:285
-#: conduits/docconduit/kpalmdoc_dlg.cpp:415
-msgid "Conversion of file %1 successful."
-msgstr "%1 dosyasının çevrimi başarılı."
-
-#: conduits/docconduit/kpalmdoc_dlg.cpp:342
-msgid ""
-"<qt>The folder <em>%1</em> for the text files is not a valid folder.</qt>"
-msgstr ""
-
-#: conduits/docconduit/kpalmdoc_dlg.cpp:369
-msgid ""
-"<qt>The folder <em>%1</em> for the PalmDOC files could not be created.</qt>"
-msgstr ""
-
-#: conduits/docconduit/kpalmdoc_dlg.cpp:437
-msgid "&Text folder:"
-msgstr "&Metin dizini:"
-
-#: conduits/docconduit/kpalmdoc_dlg.cpp:438
-msgid "&PalmDOC folder:"
-msgstr ""
-
-#: conduits/docconduit/kpalmdoc_dlg.cpp:442
-#: conduits/docconduit/kpalmdoc_dlgbase.ui:66
-#, no-c-format
-msgid "&Text file:"
-msgstr "&Metin dosyası:"
-
-#: conduits/docconduit/kpalmdoc_dlg.cpp:443
-msgid "&DOC file:"
-msgstr "&DOC dosyası:"
-
-#: conduits/docconduit/kpalmdoc_dlg.cpp:458
-msgid "<qt>The database file <em>%1</em> already exists. Overwrite it?</qt>"
-msgstr ""
-
-#: conduits/docconduit/kpalmdoc_dlg.cpp:459
-#: conduits/docconduit/kpalmdoc_dlg.cpp:504 kpilot/addressWidget.cpp:698
-#: kpilot/logWidget.cpp:343
-msgid "Overwrite"
-msgstr "Üzerine Yaz"
-
-#: conduits/docconduit/kpalmdoc_dlg.cpp:484
-#: conduits/docconduit/kpalmdoc_dlg.cpp:520
-msgid "<qt>Error while converting the text %1.</qt>"
-msgstr ""
-
-#: conduits/docconduit/kpalmdoc_dlg.cpp:503
-msgid "<qt>The text file <em>%1</em> already exists. Overwrite it?</qt>"
-msgstr ""
-
-#: conduits/knotes/knotes-action.cpp:232
-msgid "Could not open MemoDB on the handheld."
-msgstr ""
-
-#: conduits/knotes/knotes-action.cpp:272
-#, c-format
-msgid "Could not load the resource at: %1"
-msgstr "Buradaki kaynak yüklenemedi: %1"
-
-#: conduits/knotes/knotes-action.cpp:808
-#, c-format
-msgid ""
-"_n: Added one new memo.\n"
-"Added %n new memos."
-msgstr ""
-
-#: conduits/knotes/knotes-action.cpp:814
-#, c-format
-msgid ""
-"_n: Modified one memo.\n"
-"Modified %n memos."
-msgstr ""
-
-#: conduits/knotes/knotes-action.cpp:821
-#, c-format
-msgid ""
-"_n: Deleted one memo.\n"
-"Deleted %n memos."
-msgstr ""
-
-#: conduits/knotes/knotes-action.cpp:827
-#, c-format
-msgid ""
-"_n: Added one note to KNotes.\n"
-"Added %n notes to KNotes."
-msgstr ""
-
-#: conduits/knotes/knotes-action.cpp:833
-#, c-format
-msgid ""
-"_n: Modified one note in KNotes.\n"
-"Modified %n notes in KNotes."
-msgstr ""
-
-#: conduits/knotes/knotes-action.cpp:839
-#, c-format
-msgid ""
-"_n: Deleted one note from KNotes.\n"
-"Deleted %n notes from KNotes."
-msgstr ""
-
-#: conduits/knotes/knotes-action.cpp:844
-msgid "No change to KNotes."
-msgstr ""
-
-#: conduits/knotes/knotes-factory.cpp:67
-msgid "KNotes Conduit for KPilot"
-msgstr "KPilot için KNotes Kanalı"
-
-#: conduits/knotes/knotes-factory.cpp:69
-msgid "Configures the KNotes Conduit for KPilot"
-msgstr "KPilot için KNotes Bağlantısını Ayarlar"
-
-#: conduits/knotes/knotes-setup.cpp:59
-msgid "KNotes"
-msgstr "KNotes"
-
-#: conduits/malconduit/mal-conduit.cpp:121 conduits/malconduit/mal-setup.cpp:62
-msgid "MAL"
-msgstr "MAL"
-
-#: conduits/malconduit/mal-conduit.cpp:193
-msgid ""
-"Skipping MAL sync, because last synchronization was not long enough ago."
-msgstr ""
-
-#: conduits/malconduit/mal-conduit.cpp:202
-msgid "MAL synchronization failed (no SyncInfo)."
-msgstr ""
-
-#: conduits/malconduit/mal-conduit.cpp:217
-msgid "No proxy server is set."
-msgstr ""
-
-#: conduits/malconduit/mal-conduit.cpp:220
-#, c-format
-msgid "Using proxy server: %1"
-msgstr ""
-
-#: conduits/malconduit/mal-conduit.cpp:259
-msgid "No SOCKS proxy is set."
-msgstr ""
-
-#: conduits/malconduit/mal-conduit.cpp:262
-#, c-format
-msgid "Using SOCKS proxy: %1"
-msgstr ""
-
-#: conduits/memofileconduit/memofile-conduit.cpp:70
-#: conduits/memofileconduit/memofile-factory.cpp:61
-msgid "Memofile"
-msgstr ""
-
-#: conduits/memofileconduit/memofile-conduit.cpp:101
-msgid "Unable to open the memo databases on the handheld."
-msgstr ""
-
-#: conduits/memofileconduit/memofile-conduit.cpp:109
-msgid "Cannot initialize from pilot."
-msgstr ""
-
-#: conduits/memofileconduit/memofile-conduit.cpp:116
-msgid "Cannot initialize the memo files from disk."
-msgstr ""
-
-#: conduits/memofileconduit/memofile-conduit.cpp:123
-#, c-format
-msgid " Syncing with %1."
-msgstr "%1 ile eşzamanlanıyor."
-
-#: conduits/memofileconduit/memofile-conduit.cpp:126
-msgid " Copying Pilot to PC..."
-msgstr "Pilot Bilgisayara Kopyalanıyor..."
-
-#: conduits/memofileconduit/memofile-conduit.cpp:131
-msgid " Copying PC to Pilot..."
-msgstr "Bilgisayar Pilota Kopyalanıyor..."
-
-#: conduits/memofileconduit/memofile-conduit.cpp:135
-msgid " Doing regular sync..."
-msgstr "Olağan eşzamanlama yapılıyor..."
-
-#: conduits/memofileconduit/memofile-factory.cpp:63
-msgid "Memofile Conduit for KPilot"
-msgstr ""
-
-#: conduits/memofileconduit/memofile-factory.cpp:65
-msgid "Configures the Memofile Conduit for KPilot"
-msgstr ""
-
-#: conduits/notepadconduit/notepad-conduit.cpp:59
-#: conduits/notepadconduit/notepad-factory.cpp:89
-msgid "Notepad"
-msgstr "Not defteri"
-
-#: conduits/notepadconduit/notepad-conduit.cpp:79
-#: conduits/sysinfoconduit/sysinfo-conduit.cpp:591
-#, c-format
-msgid "Unable to open %1"
-msgstr "%1 açılamadı"
-
-#: conduits/notepadconduit/notepad-conduit.cpp:105
-#, c-format
-msgid ""
-"_n: 1 notepad could not be saved\n"
-"%n notepads could not be saved"
-msgstr ""
-
-#: conduits/notepadconduit/notepad-conduit.cpp:106
-#, c-format
-msgid ""
-"_n: 1 notepad saved\n"
-"%n notepads saved"
-msgstr ""
-
-#: conduits/notepadconduit/notepad-factory.cpp:67
-msgid "Saves notepads to png files"
-msgstr ""
-
-#: conduits/notepadconduit/notepad-factory.cpp:69
-msgid "Configures the Notepad Conduit for KPilot"
-msgstr ""
-
-#: conduits/notepadconduit/notepad-factory.cpp:78
-msgid "Notepad conduit is based on Angus' read-notepad, part of pilot-link"
-msgstr ""
-
-#: conduits/null/null-conduit.cpp:63 conduits/null/null-factory.cpp:63
-msgid "Null"
-msgstr "BOŞ"
-
-#: conduits/null/null-conduit.cpp:81
-msgid "NULL conduit is programmed to fail."
-msgstr ""
-
-#: conduits/null/null-factory.cpp:65
-msgid "Null Conduit for KPilot"
-msgstr "KPilot için Boş Kanal"
-
-#: conduits/null/null-factory.cpp:67
-msgid "Configures the Null Conduit for KPilot"
-msgstr "KPilot için Boş Kanalı Yapılandırır"
-
-#: conduits/popmail/popmail-conduit.cpp:89 conduits/popmail/setupDialog.cpp:66
-msgid "KMail"
-msgstr "KMail"
-
-#: conduits/popmail/popmail-conduit.cpp:118
-#, c-format
-msgid ""
-"_n: Sent one message\n"
-"Sent %n messages"
-msgstr ""
-
-#: conduits/popmail/popmail-conduit.cpp:138
-msgid "No mail was sent."
-msgstr ""
-
-#: conduits/popmail/popmail-conduit.cpp:145
-msgid "No mail could be sent."
-msgstr ""
-
-#: conduits/popmail/popmail-conduit.cpp:195
-msgid "Could not connect to DCOP server for the KMail connection."
-msgstr ""
-
-#: conduits/popmail/popmail-conduit.cpp:197
-#: conduits/popmail/popmail-conduit.cpp:232
-#: conduits/popmail/popmail-conduit.cpp:245
-#: conduits/popmail/popmail-conduit.cpp:273
-msgid "Error Sending Mail"
-msgstr "İleti Göndermede Hata"
-
-#: conduits/popmail/popmail-conduit.cpp:230
-#: conduits/popmail/popmail-conduit.cpp:243
-msgid "Cannot open temporary file to store mail from Pilot in."
-msgstr ""
-
-#: conduits/popmail/popmail-conduit.cpp:272
-msgid "DCOP connection with KMail failed."
-msgstr "KMail ile DCOP bağlantısı başarısız."
-
-#: conduits/popmail/popmail-conduit.cpp:397
-msgid "Cannot perform backup of mail database"
-msgstr ""
-
-#: conduits/popmail/popmail-conduit.cpp:405
-msgid "Unable to open mail database on handheld"
-msgstr ""
-
-#: conduits/popmail/setupDialog.cpp:68
-msgid "Mail Conduit for KPilot"
-msgstr "KPilot için Posta Kanalı"
-
-#: conduits/popmail/setupDialog.cpp:70
-msgid "Configures the Mail Conduit for KPilot"
-msgstr ""
-
-#: conduits/popmail/setupDialog.cpp:78 conduits/vcalconduit/todo-setup.cpp:53
-#: conduits/vcalconduit/todo-setup.cpp:55
-#: conduits/vcalconduit/todo-setup.cpp:57
-#: conduits/vcalconduit/vcal-setup.cpp:58
-#: conduits/vcalconduit/vcal-setup.cpp:60
-#: conduits/vcalconduit/vcal-setup.cpp:62
-msgid "Original Author"
-msgstr "Asıl Yazar"
-
-#: conduits/popmail/setupDialog.cpp:80
-msgid "POP3 code"
-msgstr "POP3 kodu"
-
-#: conduits/popmail/setupDialog.cpp:82
-msgid "SMTP support and redesign"
-msgstr "SMTP desteği"
-
-#: conduits/recordconduit/factory.cpp:64
-msgid "Record Conduit"
-msgstr ""
-
-#: conduits/recordconduit/factory.cpp:66
-msgid "Record Conduit for KPilot"
-msgstr ""
-
-#: conduits/recordconduit/factory.cpp:68
-msgid "Configures the Record Conduit for KPilot"
-msgstr ""
-
-#: conduits/sysinfoconduit/sysinfo-conduit.cpp:163
-#: conduits/sysinfoconduit/sysinfo-setup.cpp:112
-msgid "System Information"
-msgstr "Sistem Bilgisi"
-
-#: conduits/sysinfoconduit/sysinfo-conduit.cpp:254
-msgid "Password set"
-msgstr "Parola tanımlandı"
-
-#: conduits/sysinfoconduit/sysinfo-conduit.cpp:258
-msgid "No password set"
-msgstr "Parola tanımlanmadı"
-
-#: conduits/sysinfoconduit/sysinfo-conduit.cpp:308
-msgid "No Cards available via pilot-link"
-msgstr "Pilot-link üzerinden Kart mevcut değil"
-
-#: conduits/sysinfoconduit/sysinfo-conduit.cpp:463
-msgid "No debug data"
-msgstr "Hata ayıklama verisi yok"
-
-#: conduits/sysinfoconduit/sysinfo-conduit.cpp:587
-msgid "Unable to open output file, using %1 instead."
-msgstr "Çıktı dosyası açılamadı, yerine %1 kullanılıyor."
-
-#: conduits/sysinfoconduit/sysinfo-conduit.cpp:602
-#, c-format
-msgid "Handheld system information written to the file %1"
-msgstr "Avuçiçi sistem bilgisi %1 dosyasına yazıldı"
-
-#: conduits/sysinfoconduit/sysinfo-setup.cpp:52
-msgid "HardwareInfo"
-msgstr "Donanım Bilgisi"
-
-#: conduits/sysinfoconduit/sysinfo-setup.cpp:53
-msgid "UserInfo"
-msgstr "Kullanıcı Bilgisi"
-
-#: conduits/sysinfoconduit/sysinfo-setup.cpp:54
-msgid "MemoryInfo"
-msgstr "Bellek Bilgisi"
-
-#: conduits/sysinfoconduit/sysinfo-setup.cpp:55
-msgid "StorageInfo"
-msgstr "Depolama Bilgisi"
-
-#: conduits/sysinfoconduit/sysinfo-setup.cpp:56
-msgid "DatabaseList"
-msgstr "Veritabanı Listesi"
-
-#: conduits/sysinfoconduit/sysinfo-setup.cpp:57
-msgid "RecordNumbers"
-msgstr "Kayıt Numaraları"
-
-#: conduits/sysinfoconduit/sysinfo-setup.cpp:58
-msgid "SyncInfo"
-msgstr "Eşzamanlama Bilgisi"
-
-#: conduits/sysinfoconduit/sysinfo-setup.cpp:59
-#, fuzzy
-msgid "KDEVersion"
-msgstr "TDE Sürümü"
-
-#: conduits/sysinfoconduit/sysinfo-setup.cpp:60
-msgid "PalmOSVersion"
-msgstr "PalmOS Sürümü"
-
-#: conduits/sysinfoconduit/sysinfo-setup.cpp:61
-msgid "DebugInformation"
-msgstr "Hata Ayıklama Bilgisi"
-
-#: conduits/sysinfoconduit/sysinfo-setup.cpp:95
-msgid "KPilot System Information conduit"
-msgstr "KPilot Sistem Bilgisi bağlantısı"
-
-#: conduits/sysinfoconduit/sysinfo-setup.cpp:97
-msgid ""
-"Retrieves System, Hardware, and User Info from the Handheld and stores them "
-"to a file."
-msgstr ""
-"Avuçiçi Aygıt'tan, Sistem, Donanım ve Kullanıcı Bilgisi'ni alır ve bir "
-"dosyada saklar."
-
-#: conduits/timeconduit/time-conduit.cpp:57
-#: conduits/timeconduit/time-setup.cpp:68 kpilot/datebookWidget.cpp:68
-msgid "Time"
-msgstr "Zaman"
-
-#: conduits/timeconduit/time-conduit.cpp:91
-msgid "Setting the clock on the handheld"
-msgstr "El bilgisayarı üzerindeki saat ayarlandı"
-
-#: conduits/timeconduit/time-conduit.cpp:108
-msgid ""
-"PalmOS 3.25 and 3.3 do not support setting the system time. Skipping the "
-"time conduit..."
-msgstr ""
-"PalmOS 3.25 ve 3.3 sistem zamanın ayarlanmasını desteklemiyor. Zaman ayarı "
-"atlanıyor..."
-
-#: conduits/timeconduit/time-setup.cpp:48
-msgid "Time Synchronization Conduit for KPilot"
-msgstr ""
-
-#: conduits/timeconduit/time-setup.cpp:50
-msgid "Synchronizes the Time on the Handheld and the PC"
-msgstr ""
-
-#: conduits/vcalconduit/cleanupstate.cpp:62
-msgid "Cleaning up ..."
-msgstr "Temizleniyor ...Temizleniyor"
-
-#: conduits/vcalconduit/cleanupstate.cpp:91
-msgid ""
-"An error occurred while uploading \"%1\". You can try to upload the "
-"temporary local file \"%2\" manually."
-msgstr ""
-
-#: conduits/vcalconduit/initstate.cpp:59
-msgid "Initializing conduit ..."
-msgstr ""
-
-#: conduits/vcalconduit/pctohhstate.cpp:71
-msgid "Copying records to Pilot ..."
-msgstr ""
-
-#: conduits/vcalconduit/todo-conduit.cpp:183
-#: conduits/vcalconduit/todo-setup.cpp:45
-msgid "To-do"
-msgstr "Yapılacaklar"
-
-#: conduits/vcalconduit/todo-setup.cpp:47
-msgid "To-do Conduit for KPilot"
-msgstr ""
-
-#: conduits/vcalconduit/todo-setup.cpp:49
-msgid "Configures the To-do Conduit for KPilot"
-msgstr ""
-
-#: conduits/vcalconduit/todo-setup.cpp:69
-msgid "To-do Destination"
-msgstr ""
-
-#: conduits/vcalconduit/vcal-conduit.cpp:178
-#: conduits/vcalconduit/vcal-setup.cpp:70
-msgid "Calendar"
-msgstr "Takvim"
-
-#: conduits/vcalconduit/vcal-conduit.cpp:222
-msgid ""
-"Event \"%1\" has a yearly recurrence other than by month, will change this "
-"to recurrence by month on handheld."
-msgstr ""
-
-#: conduits/vcalconduit/vcal-conduitbase.cpp:183
-msgid "Could not open the calendar databases."
-msgstr "Takvim veritabanları açılamadı."
-
-#: conduits/vcalconduit/vcal-conduitbase.cpp:269
-msgid ""
-"You selected to sync with an iCalendar file, but did not give a filename. "
-"Please select a valid file name in the conduit's configuration dialog"
-msgstr ""
-
-#: conduits/vcalconduit/vcal-conduitbase.cpp:291
-#: conduits/vcalconduit/vcal-conduitbase.cpp:356
-#, c-format
-msgid "Using local time zone: %1"
-msgstr ""
-
-#: conduits/vcalconduit/vcal-conduitbase.cpp:292
-#: conduits/vcalconduit/vcal-conduitbase.cpp:357
-#, c-format
-msgid "Using non-local time zone: %1"
-msgstr ""
-
-#: conduits/vcalconduit/vcal-conduitbase.cpp:321
-msgid ""
-"You chose to sync with the file \"%1\", which cannot be opened or created. "
-"Please make sure to supply a valid file name in the conduit's configuration "
-"dialog. Aborting the conduit."
-msgstr ""
-
-#: conduits/vcalconduit/vcal-conduitbase.cpp:330
-msgid "Syncing with file \"%1\""
-msgstr ""
-
-#: conduits/vcalconduit/vcal-conduitbase.cpp:354
-msgid "Syncing with standard calendar resource."
-msgstr ""
-
-#: conduits/vcalconduit/vcal-conduitbase.cpp:367
-msgid ""
-"Unable to initialize the calendar object. Please check the conduit's setup"
-msgstr ""
-
-#: conduits/vcalconduit/vcal-conduitbase.cpp:425
-msgid ""
-"The following item was modified both on the Handheld and on your PC:\n"
-"PC entry:\n"
-"\t"
-msgstr ""
-
-#: conduits/vcalconduit/vcal-conduitbase.cpp:428
-msgid ""
-"\n"
-"Handheld entry:\n"
-"\t"
-msgstr ""
-"\n"
-"El bilgisayarı girdisi:\n"
-"\t"
-
-#: conduits/vcalconduit/vcal-conduitbase.cpp:430
-msgid ""
-"\n"
-"\n"
-"Which entry do you want to keep? It will overwrite the other entry."
-msgstr ""
-
-#: conduits/vcalconduit/vcal-conduitbase.cpp:435
-msgid "Conflicting Entries"
-msgstr "Çakışan Girdiler"
-
-#: conduits/vcalconduit/vcal-conduitbase.cpp:438 lib/plugin.cpp:309
-msgid "PC"
-msgstr ""
-
-#: conduits/vcalconduit/vcal-setup.cpp:44
-msgid "VCal Conduit for KPilot"
-msgstr ""
-
-#: conduits/vcalconduit/vcal-setup.cpp:46
-msgid "Configures the VCal Conduit for KPilot"
-msgstr ""
-
-#: conduits/vcalconduit/vcal-setup.cpp:64
-msgid "iCalendar port"
-msgstr "iCalendar portu"
-
-#: conduits/vcalconduit/vcal-setup.cpp:66 kpilot/kpilot.cpp:1038
-#: kpilot/kpilot.cpp:1039
-msgid "Bugfixer"
-msgstr "Hata Düzeltici"
-
-#: conduits/vcalconduit/vcal-setup.cpp:69
-msgid "Calendar Destination"
-msgstr ""
-
-#: kpilot/addressEditor.cpp:59
-msgid "Address Editor"
-msgstr "Adres Düzenleyici"
-
-#: kpilot/addressEditor.cpp:107
-msgid "Phone"
-msgstr "Telefon"
-
-#: kpilot/addressEditor.cpp:180
-msgid "Last name:"
-msgstr "Soyadı:"
-
-#: kpilot/addressEditor.cpp:181
-msgid "First name:"
-msgstr "Adı:"
-
-#: kpilot/addressEditor.cpp:182
-msgid "Title:"
-msgstr "Ünvanı:"
-
-#: kpilot/addressEditor.cpp:183
-msgid "Company:"
-msgstr "Firma:"
-
-#: kpilot/addressEditor.cpp:192
-msgid "Address:"
-msgstr "Adres:"
-
-#: kpilot/addressEditor.cpp:193
-msgid "City:"
-msgstr "Şehir:"
-
-#: kpilot/addressEditor.cpp:194
-msgid "State:"
-msgstr "Durum:"
-
-#: kpilot/addressEditor.cpp:195
-msgid "Zip code:"
-msgstr "Posta kodu:"
-
-#: kpilot/addressEditor.cpp:196
-msgid "Country:"
-msgstr "Ülke:"
-
-#: kpilot/addressEditor.cpp:197
-msgid "Custom 1:"
-msgstr "Özel 1:"
-
-#: kpilot/addressEditor.cpp:198
-msgid "Custom 2:"
-msgstr "Özel 2:"
-
-#: kpilot/addressEditor.cpp:199
-msgid "Custom 3:"
-msgstr "Özel 3:"
-
-#: kpilot/addressEditor.cpp:200
-msgid "Custom 4:"
-msgstr "Özel 4:"
-
-#: kpilot/addressWidget.cpp:187
-msgid "There are still %1 address editing windows open."
-msgstr ""
-
-#: kpilot/addressWidget.cpp:191
-#, c-format
-msgid ""
-"_n: There is still an address editing window open.\n"
-"There are still %n address editing windows open."
-msgstr ""
-
-#: kpilot/addressWidget.cpp:224
-msgid "<qt>Select the category of addresses to display here.</qt>"
-msgstr "<qt>Adres kategorisini görüntülemek için tıklayın.</qt>"
-
-#: kpilot/addressWidget.cpp:226 kpilot/memoWidget.cpp:238
-#: kpilot/todoWidget.cpp:220
-msgid "Category:"
-msgstr "Kategori:"
-
-#: kpilot/addressWidget.cpp:237
-msgid ""
-"<qt>This list displays all the addresses in the selected category. Click on "
-"one to display it to the right.</qt>"
-msgstr ""
-
-#: kpilot/addressWidget.cpp:241
-msgid "Address info:"
-msgstr "Adres bilgisi:"
-
-#: kpilot/addressWidget.cpp:251 kpilot/todoWidget.cpp:257
-msgid "Edit Record..."
-msgstr "Kaydı Düzenle..."
-
-#: kpilot/addressWidget.cpp:255
-msgid "<qt>You can edit an address when it is selected.</qt>"
-msgstr ""
-
-#: kpilot/addressWidget.cpp:256 kpilot/todoWidget.cpp:263
-msgid "<qt><i>Editing is disabled by the 'internal editors' setting.</i></qt>"
-msgstr ""
-
-#: kpilot/addressWidget.cpp:259 kpilot/todoWidget.cpp:266
-msgid "New Record..."
-msgstr "Yeni Kayıt..."
-
-#: kpilot/addressWidget.cpp:263
-msgid "<qt>Add a new address to the address book.</qt>"
-msgstr "<qt>Adres defterine yeni bir adres ekle.</qt>"
-
-#: kpilot/addressWidget.cpp:264
-msgid "<qt><i>Adding is disabled by the 'internal editors' setting.</i></qt>"
-msgstr ""
-
-#: kpilot/addressWidget.cpp:269 kpilot/todoWidget.cpp:275
-msgid "Delete Record"
-msgstr "Kayıt sil"
-
-#: kpilot/addressWidget.cpp:274
-msgid "<qt>Delete the selected address from the address book.</qt>"
-msgstr "<qt>Seçili adresleri adres defterinden sil.</qt>"
-
-#: kpilot/addressWidget.cpp:275 kpilot/memoWidget.cpp:285
-#: kpilot/todoWidget.cpp:281
-msgid "<qt><i>Deleting is disabled by the 'internal editors' setting.</i></qt>"
-msgstr ""
-
-#: kpilot/addressWidget.cpp:277
-msgid ""
-"_: Export addresses to file\n"
-"Export..."
-msgstr ""
-
-#: kpilot/addressWidget.cpp:281
-msgid "<qt>Export all addresses in the selected category to CSV format.</qt>"
-msgstr ""
-
-#: kpilot/addressWidget.cpp:393 lib/pilotMemo.cpp:132
-msgid "[unknown]"
-msgstr "[bilinmeyen]"
-
-#: kpilot/addressWidget.cpp:435 kpilot/todoWidget.cpp:363
-msgid "Cannot edit new records until HotSynced with Pilot."
-msgstr ""
-
-#: kpilot/addressWidget.cpp:437 kpilot/addressWidget.cpp:574
-#: kpilot/todoWidget.cpp:365 kpilot/todoWidget.cpp:498
-msgid "HotSync Required"
-msgstr "Senkronizasyon Gerekiyor"
-
-#: kpilot/addressWidget.cpp:480
-msgid ""
-"You cannot add addresses to the address book until you have done a HotSync "
-"at least once to retrieve the database layout from your Pilot."
-msgstr ""
-
-#: kpilot/addressWidget.cpp:483
-msgid "Cannot Add New Address"
-msgstr ""
-
-#: kpilot/addressWidget.cpp:572 kpilot/todoWidget.cpp:496
-msgid "New records cannot be deleted until HotSynced with pilot."
-msgstr ""
-
-#: kpilot/addressWidget.cpp:579 kpilot/todoWidget.cpp:503
-msgid "Delete currently selected record?"
-msgstr "Seçili olan kayıt silinsin mş?"
-
-#: kpilot/addressWidget.cpp:580 kpilot/todoWidget.cpp:504
-msgid "Delete Record?"
-msgstr "Kayıt Silinsin Mi?"
-
-#: kpilot/addressWidget.cpp:677
-msgid "Export All Addresses"
-msgstr ""
-
-#: kpilot/addressWidget.cpp:678
-#, c-format
-msgid "Export Address Category %1"
-msgstr ""
-
-#: kpilot/addressWidget.cpp:696
-msgid "The file <i>%1</i> exists. Overwrite?"
-msgstr "<i>%1</i> dosyası zaten var. Üzerine yazılsın mı?"
-
-#: kpilot/addressWidget.cpp:697
-msgid "Overwrite File?"
-msgstr "Dosyanın üzerine yazılsın mı?"
-
-#: kpilot/addressWidget.cpp:710
-msgid "The file <i>%1</i> could not be opened for writing."
-msgstr ""
-
-#: kpilot/conduitConfigDialog.cpp:252
-msgid "<qt>This conduit appears to be broken and cannot be configured.</qt>"
-msgstr ""
-
-#: kpilot/conduitConfigDialog.cpp:260
-msgid "<qt>This is an old-style conduit.</qt>"
-msgstr ""
-
-#: kpilot/conduitConfigDialog.cpp:264
-msgid "Configure..."
-msgstr "Yapılandır..."
-
-#: kpilot/conduitConfigDialog.cpp:274
-msgid ""
-"<qt><i>Conduits</i> are external (possibly third-party) programs that "
-"perform synchronization actions. They may have individual configurations. "
-"Select a conduit to configure it, and enable it by clicking on its checkbox. "
-"</qt>"
-msgstr ""
-
-#: kpilot/conduitConfigDialog.cpp:282
-msgid ""
-"<qt><p>The <i>general</i> portion of KPilot's setup contains settings for "
-"your hardware and the way KPilot should display your data. For the basic "
-"setup, which should fulfill the need of most users, just use the setup "
-"wizard below.</p>If you need some special settings, this dialog provides all "
-"the options for fine-tuning KPilot. But be warned: The HotSync settings are "
-"various esoteric things.</p><p>You can enable an action or conduit by "
-"clicking on its checkbox. Checked conduits will be run during a HotSync. "
-"Select a conduit to configure it.</p></qt>"
-msgstr ""
-
-#: kpilot/conduitConfigDialog.cpp:295
-msgid "Configuration Wizard"
-msgstr "Yapılandırma Sihirbazı"
-
-#: kpilot/conduitConfigDialog.cpp:369
-msgid "About KPilot. Credits."
-msgstr ""
-
-#: kpilot/conduitConfigDialog.cpp:372
-msgid "Conduits"
-msgstr "Kanallar"
-
-#: kpilot/conduitConfigDialog.cpp:374
-msgid "General Setup"
-msgstr "Genel Ayarlar"
-
-#: kpilot/conduitConfigDialog.cpp:382
-msgid "General setup of KPilot (User name, port, general sync settings)"
-msgstr ""
-
-#: kpilot/conduitConfigDialog.cpp:384
-msgid "Actions for HotSync with individual configuration."
-msgstr ""
-
-#: kpilot/conduitConfigDialog.cpp:395 kpilot/kpilotConfigDialog.cpp:470
-msgid "Startup and Exit"
-msgstr "Başlat ve Çık"
-
-#: kpilot/conduitConfigDialog.cpp:395
-msgid "Behavior at startup and exit."
-msgstr ""
-
-#: kpilot/conduitConfigDialog.cpp:396 kpilot/kpilotConfigDialog.cpp:418
-#: kpilot/kpilotConfigDialog_viewers.ui:33
-#, no-c-format
-msgid "Viewers"
-msgstr "Göstericiler"
-
-#: kpilot/conduitConfigDialog.cpp:396
-msgid "Viewer settings."
-msgstr ""
-
-#: kpilot/conduitConfigDialog.cpp:397 kpilot/kpilotConfigDialog.cpp:328
-#: lib/syncAction.cpp:208
-msgid "Backup"
-msgstr "Yedekle"
-
-#: kpilot/conduitConfigDialog.cpp:397
-msgid "Special settings for backup."
-msgstr ""
-
-#: kpilot/conduitConfigDialog.cpp:398 kpilot/kpilot.cpp:261
-#: kpilot/kpilot.cpp:263 kpilot/kpilot.cpp:515
-#: kpilot/kpilotConfigDialog.cpp:242 lib/syncAction.cpp:204
-msgid "HotSync"
-msgstr "Senkronizasyon"
-
-#: kpilot/conduitConfigDialog.cpp:398
-msgid "Special behavior during HotSync."
-msgstr ""
-
-#: kpilot/conduitConfigDialog.cpp:399 kpilot/kpilotConfigDialog.cpp:102
-msgid "Device"
-msgstr ""
-
-#: kpilot/conduitConfigDialog.cpp:399
-msgid "Hardware settings and startup and exit options."
-msgstr ""
-
-#: kpilot/conduitConfigDialog.cpp:542
-msgid ""
-"<qt>This is an internal action which has no configuration options. The "
-"action's description is: <i>%1</i> </qt>"
-msgstr ""
-
-#: kpilot/conduitConfigDialog.cpp:722
-msgid "KPilot Setup"
-msgstr "KPilot Yapılandırması"
-
-#: kpilot/conduitConfigDialog.cpp:735
-msgid ""
-"<qt>No library could be found for the conduit %1. This means that the "
-"conduit was not installed properly.</qt>"
-msgstr ""
-
-#: kpilot/conduitConfigDialog.cpp:745 kpilot/conduitConfigDialog.cpp:762
-msgid "Conduit Error"
-msgstr "Kanal Hatası"
-
-#: kpilot/conduitConfigDialog.cpp:752
-msgid ""
-"<qt>There was a problem loading the library for the conduit %1. This means "
-"that the conduit was not installed properly.</qt>"
-msgstr ""
-
-#: kpilot/datebookWidget.cpp:58 kpilot/dbviewerWidget.cpp:109
-msgid "&Add..."
-msgstr "&Ekle..."
-
-#: kpilot/datebookWidget.cpp:61 kpilot/dbviewerWidget.cpp:111
-msgid "&Edit..."
-msgstr "&Düzenle..."
-
-#: kpilot/datebookWidget.cpp:64
-msgid "&Delete..."
-msgstr "&Sil..."
-
-#: kpilot/datebookWidget.cpp:69
-msgid "Al"
-msgstr ""
-
-#: kpilot/datebookWidget.cpp:70
-msgid "Rec"
-msgstr ""
-
-#: kpilot/datebookWidget.cpp:71 kpilot/listCat.cpp:85
-msgid "Description"
-msgstr "Açıklama"
-
-#: kpilot/dbAppInfoEditor.cpp:46
-msgid "Edit AppInfo Block"
-msgstr ""
-
-#: kpilot/dbAppInfoEditor.cpp:68
-msgid ""
-"To view the Application info block data, please install a hex editor (e.g. "
-"khexedit from tdeutils)."
-msgstr ""
-
-#: kpilot/dbAppInfoEditor.cpp:86
-msgid "Changing the AppInfo block isn't yet supported by KPilot!"
-msgstr ""
-
-#: kpilot/dbFlagsEditor.cpp:45
-msgid "Edit Database Flags"
-msgstr ""
-
-#: kpilot/dbFlagsEditor.cpp:60
-msgid ""
-"Changing the database flags might corrupt the whole database, or make the "
-"data unusable. Do not change the values unless you are absolutely sure you "
-"know what you are doing.\n"
-"\n"
-"Really assign these new flags?"
-msgstr ""
-
-#: kpilot/dbFlagsEditor.cpp:60
-msgid "Changing Database Flags"
-msgstr "Veritabanı Bayrakları Değiştiriliyor"
-
-#: kpilot/dbFlagsEditor.cpp:60 kpilot/dbRecordEditor.cpp:75
-msgid "Assign"
-msgstr ""
-
-#: kpilot/dbRecordEditor.cpp:53
-msgid "Edit Record"
-msgstr "Kaydı Düzenle"
-
-#: kpilot/dbRecordEditor.cpp:75
-msgid ""
-"Changing the record data and flags might corrupt the whole record, or even "
-"make the database unusable. Do not change the values unless you are "
-"absolutely sure you know what you are doing.\n"
-"\n"
-"Really assign these new flags?"
-msgstr ""
-
-#: kpilot/dbRecordEditor.cpp:75
-msgid "Changing Record"
-msgstr "Kayıt Değiştiriliyor"
-
-#: kpilot/dbRecordEditor.cpp:106 kpilot/dbRecordEditor_base.ui:24
-#, no-c-format
-msgid "Record index:"
-msgstr "Kayıt indisi:"
-
-#: kpilot/dbRecordEditor.cpp:107 kpilot/dbRecordEditor_base.ui:32
-#, no-c-format
-msgid "Record ID:"
-msgstr "Kayıt No:"
-
-#: kpilot/dbRecordEditor.cpp:108 kpilot/dbRecordEditor.cpp:109
-#: kpilot/dbRecordEditor_base.ui:40 kpilot/dbRecordEditor_base.ui:51
-#: kpilot/todoEditor_base.ui:99
-#, no-c-format
-msgid "1"
-msgstr "1"
-
-#: kpilot/dbRecordEditor.cpp:110 kpilot/dbRecordEditor_base.ui:70
-#, no-c-format
-msgid "Flags"
-msgstr "Bayraklar"
-
-#: kpilot/dbRecordEditor.cpp:111 kpilot/dbRecordEditor_base.ui:81
-#, no-c-format
-msgid "&Dirty"
-msgstr ""
-
-#: kpilot/dbRecordEditor.cpp:112
-msgid "De&leted"
-msgstr "&Silindi"
-
-#: kpilot/dbRecordEditor.cpp:113
-msgid "&Busy"
-msgstr "&Meşgul"
-
-#: kpilot/dbRecordEditor.cpp:114 kpilot/dbRecordEditor_base.ui:105
-#, no-c-format
-msgid "&Secret"
-msgstr "&Gizli"
-
-#: kpilot/dbRecordEditor.cpp:115 kpilot/dbRecordEditor_base.ui:113
-#, no-c-format
-msgid "&Archived"
-msgstr "&Arşivlenmiş"
-
-#: kpilot/dbRecordEditor.cpp:193
-msgid ""
-"To view and edit the record data, please install a hex editor (e.g. "
-"kbytesedit from tdeutils)."
-msgstr ""
-
-#: kpilot/dbSelectionDialog.cpp:108
-msgid ""
-"This is a database that exists on the device. It was not added manually, so "
-"it can not removed from the list."
-msgstr ""
-
-#: kpilot/dbSelectionDialog.cpp:108
-msgid "Database on Device"
-msgstr "Aygıttaki Veritabanı"
-
-#: kpilot/dbSelectionDialog.cpp:119
-msgid "You need to select a database to delete in the list."
-msgstr ""
-
-#: kpilot/dbSelectionDialog.cpp:119
-msgid "No Database Selected"
-msgstr "Veritabanı Seçilmedi"
-
-#: kpilot/dbviewerWidget.cpp:84
-msgid "All Databases"
-msgstr "Tüm Veritabanları"
-
-#: kpilot/dbviewerWidget.cpp:85
-msgid "Only Applications (*.prc)"
-msgstr "Sadece Uygulamalar (*.prc)"
-
-#: kpilot/dbviewerWidget.cpp:86
-msgid "Only Databases (*.pdb)"
-msgstr "Sadece veritabanları (*.pdb)"
-
-#: kpilot/dbviewerWidget.cpp:93
-msgid "General Database &Information"
-msgstr "&Genel Veritabanı Bilgisi"
-
-#: kpilot/dbviewerWidget.cpp:95
-msgid "&Application Info Block (Categories etc.)"
-msgstr ""
-
-#: kpilot/dbviewerWidget.cpp:101
-msgid "Rec. Nr."
-msgstr ""
-
-#: kpilot/dbviewerWidget.cpp:102
-msgid "Length"
-msgstr ""
-
-#: kpilot/dbviewerWidget.cpp:103
-msgid "Record ID"
-msgstr ""
-
-#: kpilot/dbviewerWidget.cpp:189
-#, c-format
-msgid "<B>Warning:</B> Cannot read database file %1."
-msgstr ""
-
-#: kpilot/dbviewerWidget.cpp:194
-msgid "<B>Database:</B> %1, %2 records<BR>"
-msgstr ""
-
-#: kpilot/dbviewerWidget.cpp:203
-msgid "<B>Type:</B> %1, <B>Creator:</B> %2<br><br>"
-msgstr ""
-
-#: kpilot/dbviewerWidget.cpp:246 kpilot/dbviewerWidget.cpp:253
-#, c-format
-msgid "<B>Warning:</B> Cannot read application file %1."
-msgstr ""
-
-#: kpilot/dbviewerWidget.cpp:260
-msgid "<B>Application:</B> %1<BR><BR>"
-msgstr ""
-
-#: kpilot/dbviewerWidget.cpp:267
-msgid "Created: %1<BR>"
-msgstr ""
-
-#: kpilot/dbviewerWidget.cpp:270
-msgid "Modified: %1<BR>"
-msgstr ""
-
-#: kpilot/dbviewerWidget.cpp:273
-msgid "Backed up: %1<BR>"
-msgstr ""
-
-#: kpilot/dbviewerWidget.cpp:353
-msgid "You must select a record for editing."
-msgstr ""
-
-#: kpilot/dbviewerWidget.cpp:353
-msgid "No Record Selected"
-msgstr "Hiç Kayıt Seçilmedi"
-
-#: kpilot/dbviewerWidget.cpp:366
-msgid ""
-"<qt>Do you really want to delete the selected record? This cannot be undone."
-"<br><br>Delete record?<qt>"
-msgstr ""
-
-#: kpilot/dbviewerWidget.cpp:366
-msgid "Deleting Record"
-msgstr "Kayıt Siliniyor"
-
-#: kpilot/fileInstallWidget.cpp:71
-msgid "Files to install:"
-msgstr "Kurulacak dosyalar:"
-
-#: kpilot/fileInstallWidget.cpp:77
-msgid "Add File..."
-msgstr "Dosya Ekle..."
-
-#: kpilot/fileInstallWidget.cpp:81
-msgid "<qt>Choose a file to add to the list of files to install.</qt>"
-msgstr "<qt>Yüklenecek dosya listesine eklemek için bir dosya seçin.</qt>"
-
-#: kpilot/fileInstallWidget.cpp:83
-msgid "Clear List"
-msgstr "Listeyi sil"
-
-#: kpilot/fileInstallWidget.cpp:87
-msgid ""
-"<qt>Clear the list of files to install. No files will be installed.</qt>"
-msgstr ""
-
-#: kpilot/fileInstallWidget.cpp:95
-msgid ""
-"<qt>This lists files that will be installed on the Pilot during the next "
-"HotSync. Drag files here or use the Add button.</qt>"
-msgstr ""
-
-#: kpilot/fileInstallWidget.cpp:217
-msgid "*.pdb *.prc|PalmOS Databases (*.pdb *.prc)"
-msgstr ""
-
-#: kpilot/fileInstallWidget.cpp:291
-msgid ""
-"_: Delete a single file item\n"
-"Delete"
-msgstr ""
-
-#: kpilot/fileInstallWidget.cpp:294
-msgid "Delete selected files"
-msgstr "Seçili dosyaları sil"
-
-#: kpilot/fileInstaller.cpp:109
-#, c-format
-msgid "Cannot install %1"
-msgstr "%1 yüklenemedi"
-
-#: kpilot/fileInstaller.cpp:110
-msgid ""
-"Only PalmOS database files (like *.pdb and *.prc) can be installed by the "
-"file installer."
-msgstr ""
-
-#: kpilot/hotSync.cpp:339
-#, c-format
-msgid "Backup directory: %1."
-msgstr "Yedekleme dizini: %1."
-
-#: kpilot/hotSync.cpp:353
-msgid "Full backup started."
-msgstr "Tam yedekleme başlatıldı."
-
-#: kpilot/hotSync.cpp:358
-msgid "Fast backup started"
-msgstr "Hızlı yedekleme başlatıldı"
-
-#: kpilot/hotSync.cpp:387
-msgid "Exiting on cancel."
-msgstr "İşlem iptal edildi."
-
-#: kpilot/hotSync.cpp:399
-msgid "Full backup complete."
-msgstr "Tam yedekleme tamamlandı."
-
-#: kpilot/hotSync.cpp:403
-msgid "Fast backup complete."
-msgstr "Hızlı yedekleme tamamlandı."
-
-#: kpilot/hotSync.cpp:419
-#, c-format
-msgid "Backing up: %1"
-msgstr "%1 Yedekleniyor"
-
-#: kpilot/hotSync.cpp:447
-#, c-format
-msgid "Skipping %1"
-msgstr "%1 atlanıyor"
-
-#: kpilot/hotSync.cpp:482
-msgid "Backup of %1 failed.\n"
-msgstr "%1 Yedeklemesi başarısız.\n"
-
-#: kpilot/hotSync.cpp:540
-msgid "... OK.\n"
-msgstr "... Tamam.\n"
-
-#: kpilot/hotSync.cpp:548
-msgid "Backup failed."
-msgstr "Yedekleme başarısız oldu."
-
-#: kpilot/hotSync.cpp:607
-msgid "[File Installer]"
-msgstr "[Dosya Yükleyici]"
-
-#: kpilot/hotSync.cpp:612
-msgid "No Files to install"
-msgstr "Kurulacak Dosya Yok."
-
-#: kpilot/hotSync.cpp:624
-#, c-format
-msgid ""
-"_n: Installing one file\n"
-"Installing %n Files"
-msgstr ""
-
-#: kpilot/hotSync.cpp:649
-msgid "Done Installing Files"
-msgstr "Dosyaların Kurulumu Tamamlandı"
-
-#: kpilot/hotSync.cpp:663
-#, c-format
-msgid "Installing %1"
-msgstr "%1 Kuruluyor"
-
-#: kpilot/hotSync.cpp:686
-msgid "Cannot install file &quot;%1&quot;."
-msgstr ""
-
-#: kpilot/hotSync.cpp:713 kpilot/hotSync.cpp:723
-msgid "Unable to open file &quot;%1&quot;."
-msgstr ""
-
-#: kpilot/hotSync.cpp:732
-msgid "Unable to read file &quot;%1&quot;."
-msgstr ""
-
-#: kpilot/hotSync.cpp:748
-msgid ""
-"The database in &quot;%1&quot; has a resource name that is longer than 31 "
-"characters. This suggests a bug in the tool used to create the database. "
-"KPilot cannot install this database."
-msgstr ""
-
-#: kpilot/hotSync.cpp:806
-msgid ""
-"_: A common name\n"
-"John Doe"
-msgstr "Murat Yılmaz"
-
-#: kpilot/hotSync.cpp:808
-msgid ""
-"<qt>Neither KPilot nor the handheld have a username set. They <i>should</i> "
-"be set. Should KPilot set them to a default value (<i>%1</i>)?</qt>"
-msgstr ""
-
-#: kpilot/hotSync.cpp:814 kpilot/hotSync.cpp:831 kpilot/hotSync.cpp:855
-msgid "User Unknown"
-msgstr "Bilinmeyen Kullanıcı"
-
-#: kpilot/hotSync.cpp:826
-msgid ""
-"<qt>The handheld has a username set (<i>%1</i>) but KPilot does not. Should "
-"KPilot use this username in future?</qt>"
-msgstr ""
-
-#: kpilot/hotSync.cpp:844
-msgid ""
-"KPilot has a username set (<i>%1</i>) but the handheld does not. Should "
-"KPilot's username be set in the handheld as well?"
-msgstr ""
-
-#: kpilot/hotSync.cpp:848
-msgid ""
-"<br/>(<i>Note:</i> If your handheld has been reset to factory defaults, you "
-"should use <i>Restore</i> instead of a regular HotSync. Click on Cancel to "
-"stop this sync.)"
-msgstr ""
-
-#: kpilot/hotSync.cpp:877
-msgid ""
-"<qt>The handheld thinks that the username is %1; however, KPilot says you "
-"are %2.Which of these is the correct name?\n"
-"If you click on Cancel, the sync will proceed, but the usernames will not be "
-"changed.</qt>"
-msgstr ""
-
-#: kpilot/hotSync.cpp:887
-msgid "User Mismatch"
-msgstr "Kullanıcı Eşleşme Hatası"
-
-#: kpilot/hotSync.cpp:890
-msgid "Use KPilot Name"
-msgstr ""
-
-#: kpilot/hotSync.cpp:891
-msgid "Use Handheld Name"
-msgstr ""
-
-#: kpilot/hotSync.cpp:997
-msgid "Restore directory does not exist."
-msgstr "Kaydetme dizini yok."
-
-#: kpilot/hotSync.cpp:998 kpilot/hotSync.cpp:1013
-msgid "Restore not performed."
-msgstr ""
-
-#: kpilot/hotSync.cpp:1003
-msgid ""
-"<qt>Are you sure you want to completely restore your Pilot from the backup "
-"directory (<i>%1</i>)? This will erase any information you currently have on "
-"your Pilot.</qt>"
-msgstr ""
-
-#: kpilot/hotSync.cpp:1008
-msgid "Restore Pilot"
-msgstr ""
-
-#: kpilot/hotSync.cpp:1010
-msgid "Restore <i>not</i> performed."
-msgstr ""
-
-#: kpilot/hotSync.cpp:1012
-msgid "Canceled by user."
-msgstr ""
-
-#: kpilot/hotSync.cpp:1024 kpilot/hotSync.cpp:1094
-msgid "Restoring %1..."
-msgstr ""
-
-#: kpilot/hotSync.cpp:1044
-msgid "File '%1' cannot be read."
-msgstr ""
-
-#: kpilot/hotSync.cpp:1071
-msgid "OK."
-msgstr "Tamam."
-
-#: kpilot/hotSync.cpp:1085
-msgid "Restore incomplete."
-msgstr "Yeniden yükleme tamamlanmadı."
-
-#: kpilot/hotSync.cpp:1100
-msgid "Cannot restore file `%1'."
-msgstr "`%1' dosyası yeniden yüklenemedi."
-
-#: kpilot/internalEditorAction.cpp:62
-msgid "[Internal Editors]"
-msgstr ""
-
-#: kpilot/internalEditorAction.cpp:76
-#, c-format
-msgid "Databases with changed records: %1"
-msgstr ""
-
-#: kpilot/internalEditorAction.cpp:101
-msgid "Unable to open the serial or local database for %1. Skipping it."
-msgstr ""
-
-#: kpilot/internalEditorAction.cpp:156
-msgid "record"
-msgstr "kayıt"
-
-#: kpilot/internalEditorAction.cpp:166
-msgid "address"
-msgstr "adres"
-
-#: kpilot/internalEditorAction.cpp:177
-msgid "to-do entry"
-msgstr ""
-
-#: kpilot/internalEditorAction.cpp:186
-msgid "memo"
-msgstr "hatırlatma"
-
-#: kpilot/internalEditorAction.cpp:197
-msgid "calendar entry"
-msgstr ""
-
-#: kpilot/internalEditorAction.cpp:204
-msgid ""
-"The %1 with ID %2 of the database \"%3\" was changed on the handheld and in "
-"the internal editor. Shall the changes in KPilot be copied to the handheld, "
-"and so override the changes there?"
-msgstr ""
-
-#: kpilot/internalEditorAction.cpp:209
-#, c-format
-msgid "Conflict in database  %1"
-msgstr ""
-
-#: kpilot/internalEditorAction.cpp:211
-msgid "Use KPilot"
-msgstr ""
-
-#: kpilot/internalEditorAction.cpp:211
-msgid "Use Handheld"
-msgstr ""
-
-#: kpilot/internalEditorAction.cpp:212
-msgid "Use &KPilot"
-msgstr ""
-
-#: kpilot/internalEditorAction.cpp:213
-msgid "Use &Handheld"
-msgstr ""
-
-#: kpilot/internalEditorAction.cpp:228 kpilot/internalEditorAction.cpp:244
-msgid "Entry in KPilot"
-msgstr ""
-
-#: kpilot/internalEditorAction.cpp:235 kpilot/internalEditorAction.cpp:272
-msgid "Entry on Handheld"
-msgstr ""
-
-#: kpilot/internalEditorAction.cpp:263 kpilot/internalEditorAction.cpp:291
-msgid ""
-"To view and edit the record data, please install a hex editor (e.g. khexedit "
-"from tdeutils)."
-msgstr ""
-
-#: kpilot/internalEditorAction.cpp:315
-#, c-format
-msgid "Databases with changed flags: %1"
-msgstr ""
-
-#: kpilot/internalEditorAction.cpp:333
-msgid "Setting the database flags on the handheld is not yet supported."
-msgstr ""
-
-#: kpilot/internalEditorAction.cpp:356
-#, c-format
-msgid "Databases with changed AppBlock: %1"
-msgstr ""
-
-#: kpilot/kpilot.cpp:162
-msgid "Starting the KPilot daemon ..."
-msgstr ""
-
-#: kpilot/kpilot.cpp:179
-msgid ""
-"Could not start the KPilot daemon. The system error message was: &quot;"
-"%1&quot;"
-msgstr ""
-
-#: kpilot/kpilot.cpp:196
-msgid "Daemon status is `%1'"
-msgstr ""
-
-#: kpilot/kpilot.cpp:197
-msgid "not running"
-msgstr ""
-
-#: kpilot/kpilot.cpp:214
-msgid "Using character set %1 on the handheld."
-msgstr ""
-
-#: kpilot/kpilot.cpp:266 kpilot/kpilot.cpp:268
-msgid "To-do Viewer"
-msgstr "Yapılacak Ögesi Gösterici"
-
-#: kpilot/kpilot.cpp:270 kpilot/kpilot.cpp:272
-#: kpilot/kpilotConfigDialog_viewers.ui:74
-#, no-c-format
-msgid "Address Viewer"
-msgstr "Adres Görüntüleyici"
-
-#: kpilot/kpilot.cpp:274 kpilot/kpilot.cpp:276
-msgid "Memo Viewer"
-msgstr "Not Görüntüleyici"
-
-#: kpilot/kpilot.cpp:278 kpilot/kpilot.cpp:281 kpilot/pilotDaemon.cpp:736
-msgid "File Installer"
-msgstr "Dosya Yükleyici"
-
-#: kpilot/kpilot.cpp:283 kpilot/kpilot.cpp:285
-msgid "Generic DB Viewer"
-msgstr ""
-
-#: kpilot/kpilot.cpp:360
-msgid "Next sync will be a backup. "
-msgstr ""
-
-#: kpilot/kpilot.cpp:361 kpilot/kpilot.cpp:369 kpilot/kpilot.cpp:377
-#: kpilot/kpilot.cpp:385 kpilot/kpilot.cpp:393 kpilot/kpilot.cpp:401
-#: kpilot/pilotDaemon.cpp:671
-msgid "Please press the HotSync button."
-msgstr "Lütfen senkronizasyon tuşuna basın"
-
-#: kpilot/kpilot.cpp:368
-msgid "Next sync will restore the Pilot from backup. "
-msgstr ""
-
-#: kpilot/kpilot.cpp:376
-msgid "Next sync will be a regular HotSync. "
-msgstr ""
-
-#: kpilot/kpilot.cpp:384
-msgid "Next sync will be a Full Sync. "
-msgstr ""
-
-#: kpilot/kpilot.cpp:392
-msgid "Next sync will copy Handheld data to PC. "
-msgstr ""
-
-#: kpilot/kpilot.cpp:400
-msgid "Next sync will copy PC data to Handheld. "
-msgstr ""
-
-#: kpilot/kpilot.cpp:428
-msgid "The daemon has exited."
-msgstr ""
-
-#: kpilot/kpilot.cpp:429
-msgid "No further HotSyncs are possible."
-msgstr ""
-
-#: kpilot/kpilot.cpp:430
-msgid "Restart the daemon to HotSync again."
-msgstr ""
-
-#: kpilot/kpilot.cpp:450
-#, c-format
-msgid "Cannot start a Sync now. %1"
-msgstr ""
-
-#: kpilot/kpilot.cpp:463
-msgid "Cannot start Sync"
-msgstr ""
-
-#: kpilot/kpilot.cpp:517
-msgid "Select the kind of HotSync to perform next."
-msgstr ""
-
-#: kpilot/kpilot.cpp:518
-msgid ""
-"Select the kind of HotSync to perform next. This applies only to the next "
-"HotSync; to change the default, use the configuration dialog."
-msgstr ""
-
-#: kpilot/kpilot.cpp:525
-msgid "&HotSync"
-msgstr "&Senkronizasyon"
-
-#: kpilot/kpilot.cpp:528
-msgid "Next HotSync will be normal HotSync."
-msgstr ""
-
-#: kpilot/kpilot.cpp:529
-msgid "Tell the daemon that the next HotSync should be a normal HotSync."
-msgstr ""
-
-#: kpilot/kpilot.cpp:533
-msgid "Full&Sync"
-msgstr ""
-
-#: kpilot/kpilot.cpp:536
-msgid "Next HotSync will be a FullSync."
-msgstr ""
-
-#: kpilot/kpilot.cpp:537
-msgid ""
-"Tell the daemon that the next HotSync should be a FullSync (check data on "
-"both sides)."
-msgstr ""
-
-#: kpilot/kpilot.cpp:541
-msgid "&Backup"
-msgstr "&Yedekle"
-
-#: kpilot/kpilot.cpp:544 kpilot/kpilot.cpp:560
-msgid "Next HotSync will be backup."
-msgstr ""
-
-#: kpilot/kpilot.cpp:545
-msgid ""
-"Tell the daemon that the next HotSync should back up the Handheld to the PC."
-msgstr ""
-
-#: kpilot/kpilot.cpp:549
-msgid "&Restore"
-msgstr "&Kurtar"
-
-#: kpilot/kpilot.cpp:552
-msgid "Next HotSync will be restore."
-msgstr ""
-
-#: kpilot/kpilot.cpp:553
-msgid ""
-"Tell the daemon that the next HotSync should restore the Handheld from data "
-"on the PC."
-msgstr ""
-
-#: kpilot/kpilot.cpp:557 kpilot/kpilotConfigDialog_sync.ui:59
-#: lib/syncAction.cpp:207
-#, no-c-format
-msgid "Copy Handheld to PC"
-msgstr "Avuçiçi'ni bilgisayara kopyala"
-
-#: kpilot/kpilot.cpp:561
-msgid ""
-"Tell the daemon that the next HotSync should copy all data from the Handheld "
-"to the PC, overwriting entries on the PC."
-msgstr ""
-
-#: kpilot/kpilot.cpp:566 kpilot/kpilotConfigDialog_sync.ui:54
-#: lib/syncAction.cpp:206
-#, no-c-format
-msgid "Copy PC to Handheld"
-msgstr "Bilgisayarı Avuçiçi'ne kopyala"
-
-#: kpilot/kpilot.cpp:569
-msgid "Next HotSync will copy PC to Handheld."
-msgstr ""
-
-#: kpilot/kpilot.cpp:570
-msgid ""
-"Tell the daemon that the next HotSync should copy all data from the PC to "
-"the Handheld, overwriting entries on the Handheld."
-msgstr ""
-
-#: kpilot/kpilot.cpp:577
-msgid "&List Only"
-msgstr ""
-
-#: kpilot/kpilot.cpp:580
-msgid "Next HotSync will list databases."
-msgstr ""
-
-#: kpilot/kpilot.cpp:581
-msgid ""
-"Tell the daemon that the next HotSync should just list the files on the "
-"Handheld and do nothing else."
-msgstr ""
-
-#: kpilot/kpilot.cpp:588
-msgid "Rese&t Link"
-msgstr "&Bağlantıyı Sıfırla"
-
-#: kpilot/kpilot.cpp:591
-msgid "Reset the device connection."
-msgstr ""
-
-#: kpilot/kpilot.cpp:592
-msgid "Try to reset the daemon and its connection to the Handheld."
-msgstr ""
-
-#: kpilot/kpilot.cpp:597
-msgid "Quit KPilot, (and stop the daemon if configured that way)."
-msgstr ""
-
-#: kpilot/kpilot.cpp:613
-msgid "Configuration &Wizard..."
-msgstr "Yapılandırma &Sihirbazı...Yapılandırma Sihirbazı"
-
-#: kpilot/kpilot.cpp:616
-msgid "Configure KPilot using the configuration wizard."
-msgstr ""
-
-#: kpilot/kpilot.cpp:851
-msgid ""
-"The library containing the configuration wizard for KPilot could not be "
-"loaded, and the wizard is not available. Please try to use the regular "
-"configuration dialog."
-msgstr ""
-
-#: kpilot/kpilot.cpp:854
-msgid "Wizard Not Available"
-msgstr "Sihirbaz Kullanılabilir Değil"
-
-#: kpilot/kpilot.cpp:898
-msgid "Changed username to `%1'."
-msgstr ""
-
-#: kpilot/kpilot.cpp:927
-msgid ""
-"Cannot run KPilot's configuration wizard right now (KPilot's UI is already "
-"busy)."
-msgstr ""
-
-#: kpilot/kpilot.cpp:951
-msgid "Cannot configure KPilot right now (KPilot's UI is already busy)."
-msgstr ""
-
-#: kpilot/kpilot.cpp:991
-msgid "Setup the Pilot device, conduits and other parameters"
-msgstr ""
-
-#: kpilot/kpilot.cpp:993 kpilot/pilotDaemon.cpp:1296
-msgid "Set debugging level"
-msgstr "Hata ayıklma seviyesini ayarla"
-
-#: kpilot/kpilot.cpp:1015
-msgid "KPilot"
-msgstr "KPilot"
-
-#: kpilot/kpilot.cpp:1024 kpilot/pilotDaemon.cpp:1320
-msgid "Project Leader"
-msgstr "Proje Lideri"
-
-#: kpilot/kpilot.cpp:1030 kpilot/kpilot.cpp:1032
-msgid "Core and conduits developer"
-msgstr ""
-
-#: kpilot/kpilot.cpp:1034
-msgid "VCal conduit"
-msgstr "VCal kanalı"
-
-#: kpilot/kpilot.cpp:1035
-msgid "Abbrowser conduit"
-msgstr "Abbrowser kanalı"
-
-#: kpilot/kpilot.cpp:1036
-msgid "Expenses conduit"
-msgstr ""
-
-#: kpilot/kpilot.cpp:1037
-msgid "Notepad conduit, Bugfixer"
-msgstr ""
-
-#: kpilot/kpilot.cpp:1041
-msgid "XML GUI"
-msgstr "XML GUI"
-
-#: kpilot/kpilot.cpp:1044
-msgid ".ui files"
-msgstr ".ui dosyaları"
-
-#: kpilot/kpilot.cpp:1046
-msgid "Bugfixer, coolness"
-msgstr ""
-
-#: kpilot/kpilot.cpp:1048
-msgid "VCalconduit state machine, CMake"
-msgstr ""
-
-#: kpilot/kpilotConfig.cpp:163
-msgid "The configuration file is outdated."
-msgstr "Yapılandırma dosyasının günü geçmiş."
-
-#: kpilot/kpilotConfig.cpp:165
-msgid "The configuration file has version %1, while KPilot needs version %2."
-msgstr ""
-"Yapılandırma dosyasının sürümü %1, ancak KPilot programının %2 sürümüne "
-"ihtiyacı var."
-
-#: kpilot/kpilotConfig.cpp:170
-msgid ""
-"Please run KPilot and check the configuration carefully to update the file."
-msgstr ""
-
-#: kpilot/kpilotConfig.cpp:174
-msgid "Important changes to watch for are:"
-msgstr "İzlenmesi gereken önemli değişiklikler:"
-
-#: kpilot/kpilotConfig.cpp:178
-msgid ""
-"Renamed conduits, Kroupware and file installer have been made conduits as "
-"well."
-msgstr ""
-
-#: kpilot/kpilotConfig.cpp:181
-msgid "Conflict resolution is now a global setting."
-msgstr ""
-
-#: kpilot/kpilotConfig.cpp:186
-msgid "Changed format of no-backup databases."
-msgstr ""
-
-#: kpilot/kpilotConfig.cpp:199
-msgid ""
-"The configuration file for KPilot is out-of date. Please run KPilot to "
-"update it."
-msgstr ""
-
-#: kpilot/kpilotConfig.cpp:202 kpilot/kpilotConfig.cpp:327
-msgid "Configuration File Out-of Date"
-msgstr "Yapılandırma Dosyası Güncel Değil"
-
-#: kpilot/kpilotConfig.cpp:220
-msgid ""
-"The settings for the file installer have been moved to the conduits "
-"configuration. Check the installed conduits list."
-msgstr ""
-
-#: kpilot/kpilotConfig.cpp:223
-msgid "Settings Updated"
-msgstr "Ayarlar Güncellendi"
-
-#: kpilot/kpilotConfig.cpp:248
-msgid ""
-"<qt>The following old conduits were found on your system. It is a good idea "
-"to remove them and the associated <tt>.la</tt> and <tt>.so.0</tt> files.</qt>"
-msgstr ""
-
-#: kpilot/kpilotConfig.cpp:253
-msgid "Old Conduits Found"
-msgstr ""
-
-#: kpilot/kpilotConfig.cpp:285
-msgid ""
-"<qt>The no backup databases listed in your configuration file have been "
-"adjusted to the new format. Database creator IDs have been changed to use "
-"square brackets []."
-msgstr ""
-
-#: kpilot/kpilotConfig.cpp:289
-msgid "No Backup Databases Updated"
-msgstr ""
-
-#: kpilot/kpilotConfig.cpp:310
-msgid ""
-"KPilot is not configured for use. You may use the configuration wizard or "
-"the normal configure dialog to configure KPilot."
-msgstr ""
-
-#: kpilot/kpilotConfig.cpp:313
-msgid "Not Configured"
-msgstr "Yapılandırılmamış"
-
-#: kpilot/kpilotConfig.cpp:314
-msgid "Use &Wizard"
-msgstr ""
-
-#: kpilot/kpilotConfig.cpp:315
-msgid "Use &Dialog"
-msgstr ""
-
-#: kpilot/kpilotConfig.cpp:323
-msgid ""
-"The configuration file for KPilot is out-of date. KPilot can update some "
-"parts of the configuration automatically. Do you wish to continue?"
-msgstr ""
-
-#: kpilot/kpilotConfigDialog.cpp:68
-msgid ""
-"<qt>The settings for configuration page <i>%1</i> have been changed. Do you "
-"want to save the changes before continuing?</qt>"
-msgstr ""
-"<qt><i>%1</i> yapılandırma ayarları değiştirildi. Devam etmeden önce "
-"değişiklikleri saklamak ister misiniz?</qt>"
-
-#: kpilot/kpilotConfigDialog.cpp:145
-msgid ""
-"<qt>The device name you entered (<i>%1</i>) is longer than 13 characters. "
-"This is probably unsupported and can cause problems. Are you sure you want "
-"to use this device name?</qt>"
-msgstr ""
-
-#: kpilot/kpilotConfigDialog.cpp:150
-msgid "Device Name too Long"
-msgstr "Aygıt Adı Çok Uzun"
-
-#: kpilot/kpilotConfigDialog.cpp:150
-msgid "Use"
-msgstr ""
-
-#: kpilot/kpilotConfigDialog.cpp:150
-msgid "Do Not Use"
-msgstr "Kullanma"
-
-#: kpilot/kpilotConfigWizard.cpp:62
-msgid "Pilot Info"
-msgstr "KPilot Bilgisi"
-
-#: kpilot/kpilotConfigWizard.cpp:64
-msgid "Application to Sync With"
-msgstr ""
-
-#: kpilot/kpilotConfigWizard.cpp:127
-msgid "general TDE-PIM"
-msgstr "Genel TDE-PIM"
-
-#: kpilot/kpilotConfigWizard.cpp:133
-msgid ""
-"_: Gnome's PIM suite\n"
-"Evolution"
-msgstr "Evolution"
-
-#: kpilot/kpilotConfigWizard.cpp:157
-msgid ""
-"KPilot cannot yet synchronize the addressbook with Evolution, so the "
-"addressbook conduit was disabled.\n"
-"When syncing the calendar or to-do list using KPilot please quit Evolution "
-"before the sync, otherwise you will lose data."
-msgstr ""
-
-#: kpilot/kpilotConfigWizard.cpp:157
-msgid "Restrictions with Evolution"
-msgstr ""
-
-#: kpilot/kpilotConfigWizard.cpp:162
-msgid ""
-"_: Kpilot will sync with nothing\n"
-"nothing (it will backup only)"
-msgstr ""
-
-#: kpilot/kpilotConfigWizard.cpp:166
-msgid ""
-"_: TDE's PIM suite\n"
-"Kontact"
-msgstr ""
-
-#: kpilot/kpilotConfigWizard.cpp:200
-#, c-format
-msgid "KPilot is now configured to sync with %1."
-msgstr ""
-
-#: kpilot/kpilotConfigWizard.cpp:205
-msgid ""
-"The remaining options in the config dialog are advanced options and can be "
-"used to fine-tune KPilot."
-msgstr ""
-
-#: kpilot/kpilotConfigWizard.cpp:210
-msgid "Automatic Configuration Finished"
-msgstr "Otomatik Yapılandırma Tamamlandı"
-
-#: kpilot/kpilotConfigWizard.cpp:217
-msgid ""
-"Please put the handheld in the cradle, press the hotsync button and click on "
-"\"Continue\".\n"
-"\n"
-"Some kernel versions (Linux 2.6.x) have problems with the visor kernel "
-"module (for Sony Clie devices). Running an autodetection in that case might "
-"block the computer from doing hotsyncs until it is rebooted. In that case it "
-"might be advisable not to continue."
-msgstr ""
-
-#: kpilot/kpilotConfigWizard.cpp:223
-msgid "Handheld Detection"
-msgstr ""
-
-#: kpilot/kpilotProbeDialog.cpp:90
-msgid "Autodetecting Your Handheld"
-msgstr ""
-
-#: kpilot/kpilotProbeDialog.cpp:90
-msgid "Restart Detection"
-msgstr ""
-
-#: kpilot/kpilotProbeDialog.cpp:97
-msgid ""
-"KPilot is now trying to automatically detect the device of your handheld. "
-"Please press the hotsync button if you have not done so already."
-msgstr ""
-
-#: kpilot/kpilotProbeDialog.cpp:100
-msgid "Status"
-msgstr "Durum"
-
-#: kpilot/kpilotProbeDialog.cpp:104
-msgid "Autodetection not yet started..."
-msgstr ""
-
-#: kpilot/kpilotProbeDialog.cpp:113
-msgid "Detected Values"
-msgstr ""
-
-#: kpilot/kpilotProbeDialog.cpp:119
-msgid "Handheld user:"
-msgstr ""
-
-#: kpilot/kpilotProbeDialog.cpp:123
-msgid "Device:"
-msgstr "Aygıt:"
-
-#: kpilot/kpilotProbeDialog.cpp:126 kpilot/kpilotProbeDialog.cpp:129
-msgid "[Not yet known]"
-msgstr ""
-
-#: kpilot/kpilotProbeDialog.cpp:195
-msgid "Starting detection..."
-msgstr ""
-
-#: kpilot/kpilotProbeDialog.cpp:233
-msgid "Waiting for handheld to connect..."
-msgstr ""
-
-#: kpilot/kpilotProbeDialog.cpp:266
-msgid "Timeout reached, could not detect a handheld."
-msgstr ""
-
-#: kpilot/kpilotProbeDialog.cpp:267
-msgid ""
-"<qt>A handheld could not be detected. Possible check the following things:</"
-"p><ul><li> Have you pressed the hotsync button on the handheld?\n"
-"<li> Make sure the device sits in the cradle correctly.\n"
-"<li> Make sure the cradle is correctly plugged in to the computer.\n"
-"<li> Have you checked that your device is actually supported by kpilot (see "
-"http://www.kpilot.org).\n"
-"</ul>"
-msgstr ""
-
-#: kpilot/kpilotProbeDialog.cpp:273
-msgid "Automatic Detection Failed"
-msgstr "Otomatik Bulma Başarısız Oldu"
-
-#: kpilot/kpilotProbeDialog.cpp:288
-#, c-format
-msgid "Found a connected device on %1"
-msgstr ""
-
-#: kpilot/kpilotProbeDialog.cpp:338
-msgid "Disconnected from all devices"
-msgstr ""
-
-#: kpilot/kroupware.cpp:126
-msgid "Syncing to-dos with KMail"
-msgstr ""
-
-#: kpilot/kroupware.cpp:135
-msgid "Syncing calendar with KMail"
-msgstr ""
-
-#: kpilot/kroupware.cpp:177
-msgid "Syncing Notes with Mail"
-msgstr ""
-
-#: kpilot/kroupware.cpp:188
-msgid "Rewriting to-dos to KMail..."
-msgstr ""
-
-#: kpilot/kroupware.cpp:195
-msgid "Rewriting Calendar to KMail"
-msgstr ""
-
-#: kpilot/kroupware.cpp:230
-msgid "Syncing KMail with Addresses "
-msgstr ""
-
-#: kpilot/kroupware.cpp:259
-msgid "Syncing KMail with Notes"
-msgstr ""
-
-#: kpilot/logFile.cpp:97 lib/actions.cpp:134
-msgid "HotSync finished."
-msgstr "Senkronizasyon tamamlandı."
-
-#: kpilot/logWidget.cpp:90
-msgid ""
-"<qt>This lists all the messages received during the current HotSync</qt>"
-msgstr ""
-
-#: kpilot/logWidget.cpp:119
-msgid "<qt><b>HotSync Log</b></qt>"
-msgstr ""
-
-#: kpilot/logWidget.cpp:134
-msgid ""
-"_: Clear the text of HotSync messages\n"
-"Clear Log"
-msgstr "Kayıtları Temizle"
-
-#: kpilot/logWidget.cpp:136
-msgid "<qt>Clears the list of messages from the current HotSync.</qt>"
-msgstr ""
-
-#: kpilot/logWidget.cpp:140
-msgid "Save Log..."
-msgstr ""
-
-#: kpilot/logWidget.cpp:141
-msgid ""
-"<qt>You can save the list of messages received during this HotSync to a file "
-"(for example for use in a bug report) by clicking here.</qt>"
-msgstr ""
-
-#: kpilot/logWidget.cpp:150
-msgid "Sync progress:"
-msgstr ""
-
-#: kpilot/logWidget.cpp:153
-msgid "<qt>The (estimated) percentage completed in the current HotSync.</qt>"
-msgstr ""
-
-#: kpilot/logWidget.cpp:270
-msgid "<b>HotSync Finished.</b>"
-msgstr ""
-
-#: kpilot/logWidget.cpp:334
-msgid "Save Log"
-msgstr "Günlüğü Kaydet"
-
-#: kpilot/logWidget.cpp:341
-msgid "The file exists. Do you want to overwrite it?"
-msgstr "Bu dosya mevcut. Üzerine yazılsın mı?"
-
-#: kpilot/logWidget.cpp:343
-msgid "File Exists"
-msgstr "Dosya Mevcut"
-
-#: kpilot/logWidget.cpp:343
-msgid "Do Not Overwrite"
-msgstr "Üzerine Yazma"
-
-#: kpilot/logWidget.cpp:367
-msgid "<qt>Cannot open the file &quot;%1&quot; for writing; try again?</qt>"
-msgstr ""
-
-#: kpilot/logWidget.cpp:369
-msgid "Cannot Save"
-msgstr "Kaydedilemiyor"
-
-#: kpilot/logWidget.cpp:369
-msgid "Try Again"
-msgstr "Yeniden Dene"
-
-#: kpilot/logWidget.cpp:369
-msgid "Do Not Try"
-msgstr "Deneme"
-
-#: kpilot/main-test.cpp:66
-msgid "Path to Pilot device node"
-msgstr ""
-
-#: kpilot/main-test.cpp:69
-msgid "List DBs"
-msgstr ""
-
-#: kpilot/main-test.cpp:71
-msgid "Backup Pilot to <dest dir>"
-msgstr ""
-
-#: kpilot/main-test.cpp:73
-msgid "Restore Pilot from backup"
-msgstr ""
-
-#: kpilot/main-test.cpp:76
-msgid "Run conduit from desktop file <filename>"
-msgstr ""
-
-#: kpilot/main-test.cpp:80
-msgid "Run a specific check (with the device)"
-msgstr ""
-
-#: kpilot/main-test.cpp:83
-msgid "Show KPilot configuration information"
-msgstr "KPilot Yapılandırma bilgilerini göster"
-
-#: kpilot/main-test.cpp:86
-msgid "Set the debug level"
-msgstr ""
-
-#: kpilot/main-test.cpp:94
-msgid "*Really* run the conduit, not in test mode."
-msgstr ""
-
-#: kpilot/main-test.cpp:98
-msgid "Run the conduit in file-test mode."
-msgstr ""
-
-#: kpilot/main-test.cpp:101
-msgid "Copy Pilot to Desktop."
-msgstr ""
-
-#: kpilot/main-test.cpp:104
-msgid "Copy Desktop to Pilot."
-msgstr ""
-
-#: kpilot/main-test.cpp:107
-msgid "Repeated perform action - only useful for --list"
-msgstr ""
-
-#: kpilot/main-test.cpp:347
-msgid "KPilotTest"
-msgstr "KPilot Deneme"
-
-#: kpilot/main-test.cpp:352
-msgid "KPilot Maintainer"
-msgstr "KPilot Yazarı"
-
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:38
-#: conduits/docconduit/doc-setupdialog.ui:43
-#: conduits/docconduit/kpalmdoc_dlgbase.ui:28 conduits/knotes/setup_base.ui:34
-#: conduits/malconduit/mal-setup_dialog.ui:38
-#: conduits/memofileconduit/setup_base.ui:68
-#: conduits/notepadconduit/notepad-setup.ui:32 conduits/null/setup_base.ui:68
-#: conduits/recordconduit/setup_base.ui:68
-#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:35
-#: conduits/timeconduit/time-setup_dialog.ui:35
-#: conduits/vcalconduit/korganizerConduit.ui:66 kpilot/main-test.cpp:357
-#, no-c-format
-msgid "General"
-msgstr "Genel"
-
-#: kpilot/main-test.cpp:359
-msgid "Conduit Actions"
-msgstr "Kanal Eylemleri"
-
-#: kpilot/memoWidget.cpp:234
-msgid ""
-"Select the category of addresses\n"
-"to display here."
-msgstr ""
-"Adres kategorisini görüntülemek\n"
-" için tıklayın."
-
-#: kpilot/memoWidget.cpp:237
-msgid "Memos:"
-msgstr "Notlar:"
-
-#: kpilot/memoWidget.cpp:249
-msgid ""
-"This list displays all the memos\n"
-"in the selected category. Click on\n"
-"one to display it to the right."
-msgstr ""
-"Seçilen kategorideki tüm notları\n"
-"görüntüler. Sağ tarafta görmek\n"
-"istediğiniz nota tıklayın"
-
-#: kpilot/memoWidget.cpp:253
-msgid "Memo text:"
-msgstr "Not içeriği:"
-
-#: kpilot/memoWidget.cpp:261
-msgid "The text of the selected memo appears here."
-msgstr "Seçilen notun içeriği buradan görülebilir."
-
-#: kpilot/memoWidget.cpp:264
-msgid "Import Memo..."
-msgstr "Hatırlatmaları Al..."
-
-#: kpilot/memoWidget.cpp:268
-msgid "Read a text file and add it to the Pilot's memo database."
-msgstr "Bir metin belgesini okur ve Pilot'un not veritabanına ekler."
-
-#: kpilot/memoWidget.cpp:269
-msgid "<qt><i>Import is disabled by the 'internal editors' setting.</i></qt>"
-msgstr ""
-
-#: kpilot/memoWidget.cpp:272
-msgid "Export Memo..."
-msgstr "Hatırlatmaları Aktar..."
-
-#: kpilot/memoWidget.cpp:277
-msgid "Write the selected memo to a file."
-msgstr "Seçili notu dosyaya yazar"
-
-#: kpilot/memoWidget.cpp:279
-msgid "Delete Memo"
-msgstr "Not Sil"
-
-#: kpilot/memoWidget.cpp:284
-msgid "Delete the selected memo."
-msgstr "Seçili olan notu sil"
-
-#: kpilot/memoWidget.cpp:288
-msgid "Add Memo"
-msgstr ""
-
-#: kpilot/memoWidget.cpp:291
-msgid "Add a new memo to the database."
-msgstr ""
-
-#: kpilot/memoWidget.cpp:343
-msgid "Delete currently selected memo?"
-msgstr "Seçili olan not silinsin mi?"
-
-#: kpilot/memoWidget.cpp:344
-msgid "Delete Memo?"
-msgstr "Not silinsin mi?"
-
-#: kpilot/memoWidget.cpp:367
-msgid "Cannot open MemoDB to delete record."
-msgstr ""
-
-#: kpilot/memoWidget.cpp:368
-msgid "Cannot Delete Memo"
-msgstr ""
-
-#: kpilot/pilotComponent.cpp:153
-msgid "All"
-msgstr "Hepsi"
-
-#: kpilot/pilotDaemon.cpp:157
-msgid "Start &KPilot"
-msgstr "KPilot'u &Başlat"
-
-#: kpilot/pilotDaemon.cpp:159
-msgid "&Configure KPilot..."
-msgstr "&KPilot Uygulamasını Yapılandır..."
-
-#: kpilot/pilotDaemon.cpp:164
-msgid ""
-"_: Appended to names of sync types to indicate the sync will happen just one "
-"time\n"
-" (once)"
-msgstr ""
-
-#: kpilot/pilotDaemon.cpp:168
-msgid "Default (%1)"
-msgstr "Öntanımlı (%1)Öntanımlı"
-
-#: kpilot/pilotDaemon.cpp:185
-msgid "Next &Sync"
-msgstr "So&nraki Eşzamanlama"
-
-#: kpilot/pilotDaemon.cpp:670
-msgid "Next HotSync will be: %1. "
-msgstr ""
-
-#: kpilot/pilotDaemon.cpp:902
-msgid "HotSync is disabled while the screen is locked."
-msgstr ""
-
-#: kpilot/pilotDaemon.cpp:907
-msgid ""
-"HotSync is disabled because KPilot could not determine the state of the "
-"screen saver. You can disable this security feature by unchecking the 'do "
-"not sync when screensaver is active' box in the HotSync page of the "
-"configuration dialog."
-msgstr ""
-
-#: kpilot/pilotDaemon.cpp:1165 kpilot/pilotDaemon.cpp:1166
-msgid "HotSync Completed.<br>"
-msgstr "Senkronizasyon Tamamlandı.<br>"
-
-#: kpilot/pilotDaemon.cpp:1274
-#, c-format
-msgid "Next sync is %1."
-msgstr ""
-
-#: kpilot/pilotDaemon.cpp:1298
-msgid "Device to try first"
-msgstr ""
-
-#: kpilot/pilotDaemon.cpp:1299
-msgid "Exit instead of complaining about bad configuration files"
-msgstr ""
-
-#: kpilot/pilotDaemon.cpp:1311
-msgid "KPilot Daemon"
-msgstr "KPilot Programı"
-
-#: kpilot/pilotDaemon.cpp:1326
-msgid "Developer"
-msgstr "Geliştirici"
-
-#: kpilot/todoEditor.cpp:48
-msgid "To-do Editor"
-msgstr "Yapılacak Ögesi Düzenleyici"
-
-#: kpilot/todoWidget.cpp:174
-msgid "There are still %1 to-do editing windows open."
-msgstr ""
-
-#: kpilot/todoWidget.cpp:178
-#, c-format
-msgid ""
-"_n: There is still a to-do editing window open.\n"
-"There are still %n to-do editing windows open."
-msgstr ""
-
-#: kpilot/todoWidget.cpp:218
-msgid "<qt>Select the category of to-dos to display here.</qt>"
-msgstr ""
-
-#: kpilot/todoWidget.cpp:225
-msgid "To-do Item"
-msgstr "Yapılacak Ögesi"
-
-#: kpilot/todoWidget.cpp:243
-msgid ""
-"<qt>This list displays all the to-dos in the selected category. Click on one "
-"to display it to the right.</qt>"
-msgstr ""
-
-#: kpilot/todoWidget.cpp:247
-msgid "To-do info:"
-msgstr "Yapılacak bilgileri:"
-
-#: kpilot/todoWidget.cpp:262
-msgid "<qt>You can edit a to-do when it is selected.</qt>"
-msgstr ""
-
-#: kpilot/todoWidget.cpp:270
-msgid "<qt>Add a new to-do to the to-do list.</qt>"
-msgstr ""
-
-#: kpilot/todoWidget.cpp:271
-msgid ""
-"<qt><i>Adding new to-dos is disabled by the 'internal editors' setting.</i></"
-"qt>"
-msgstr ""
-
-#: kpilot/todoWidget.cpp:280
-msgid "<qt>Delete the selected to-do from the to-do list.</qt>"
-msgstr ""
-
-#: kpilot/todoWidget.cpp:408
-msgid ""
-"You cannot add to-dos to the to-do list until you have done a HotSync at "
-"least once to retrieve the database layout from your Pilot."
-msgstr ""
-
-#: kpilot/todoWidget.cpp:411
-msgid "Cannot Add New To-do"
-msgstr ""
-
-#: lib/actionQueue.cpp:136
-msgid ""
-"The connection to the handheld was lost. Synchronization cannot continue."
-msgstr ""
-
-#: lib/actions.cpp:54
-msgid "KPilot %1 HotSync starting...\n"
-msgstr ""
-
-#: lib/actions.cpp:56
-msgid "Using encoding %1 on the handheld."
-msgstr "El bilgisayarı üzerinde %1 kodlamasını kullan."
-
-#: lib/actions.cpp:67
-msgid "KPilot is busy and cannot process the HotSync right now."
-msgstr ""
-
-#: lib/actions.cpp:114
-msgid "Testing.\n"
-msgstr "Test ediliyor.\n"
-
-#: lib/actions.cpp:130
-msgid "Syncing database %1..."
-msgstr "%1 veritabanı senkronize ediliyor"
-
-#: lib/kpilotdevicelink.cpp:148
-msgid "Could not open device: %1 (will retry)"
-msgstr "%1 aygıtı açılamadı (yeniden deneme yapılacak)"
-
-#: lib/kpilotdevicelink.cpp:187
-msgid "Trying to open device %1..."
-msgstr "%1 aygıtı açılıyor..."
-
-#: lib/kpilotdevicelink.cpp:241
-msgid "Already listening on that device"
-msgstr ""
-
-#: lib/kpilotdevicelink.cpp:261
-msgid "Cannot create socket for communicating with the Pilot (%1)"
-msgstr "Pilot (%1) ile iletişim kurmak için soket oluşturulamadı"
-
-#: lib/kpilotdevicelink.cpp:289
-msgid "Cannot open Pilot port \"%1\". "
-msgstr "Pilot portu \"%1\" açılamadı. "
-
-#: lib/kpilotdevicelink.cpp:391
-msgid "Cannot listen on Pilot socket (%1)"
-msgstr "Pilot üzerindeki soket (%1) dinlenemiyor"
-
-#: lib/kpilotdevicelink.cpp:411 lib/kpilotdevicelink.cpp:426
-msgid "Cannot accept Pilot (%1)"
-msgstr "Pilot (%1) kabul edilemiyor"
-
-#: lib/kpilotdevicelink.cpp:427
-msgid "already connected"
-msgstr ""
-
-#: lib/kpilotdevicelink.cpp:441
-msgid "Unable to read system information from Pilot"
-msgstr "Pilot'tan sistem bilgisi okunamıyor"
-
-#: lib/kpilotdevicelink.cpp:478
-msgid "Checking last PC..."
-msgstr "Son PC denetleniyor..."
-
-#: lib/kpilotdevicelink.cpp:487
-msgid ""
-"Could not read user information from the Pilot. Perhaps you have a password "
-"set on the device?"
-msgstr ""
-"Pilot aygıtındaki kullanıcı bilgisi okunamadı. Bu aygıt üzerinde bir "
-"kullanıcı parolası tanımlanmış olabilir."
-
-#: lib/kpilotdevicelink.cpp:670
-msgid "The Pilot device is not configured yet."
-msgstr "Pilot aygıtı henüz yapılandırılmadı."
-
-#: lib/kpilotdevicelink.cpp:709
-msgid "Pilot device %1 is not read-write."
-msgstr "Pilot aygıtı %1 yazılabilir-okunabilir değil."
-
-#: lib/kpilotdevicelink.cpp:719
-msgid ""
-"Pilot device %1 does not exist. Probably it is a USB device and will appear "
-"during a HotSync."
-msgstr ""
-
-#: lib/kpilotdevicelink.cpp:765 lib/kpilotdevicelink.cpp:774
-msgid "<qt>Cannot install the file &quot;%1&quot;.</qt>"
-msgstr "<qt>&quot;%1&quot; dosyası yüklenemiyor.</qt>"
-
-#: lib/kpilotdevicelink.cpp:846
-msgid "End of HotSync\n"
-msgstr ""
-
-#: lib/kpilotdevicelinkPrivate.h:307
-msgid " The port does not exist."
-msgstr " Port bulunamadı."
-
-#: lib/kpilotdevicelinkPrivate.h:310
-#, fuzzy
-msgid " There is no such device."
-msgstr " Böyle bir aygıt yok."
-
-#: lib/kpilotdevicelinkPrivate.h:313
-#, fuzzy
-msgid " You do not have permission to open the Pilot device."
-msgstr " Pilot aygıtını açmak için yetkiye sahip değilsiniz."
-
-#: lib/kpilotdevicelinkPrivate.h:317
-msgid " Check Pilot path and permissions."
-msgstr " Pilot patikasını ve yetkilerini kontrol edin."
-
-#: lib/pilotDateEntry.cpp:179
-#, c-format
-msgid "Start date: %1"
-msgstr "Başlangıç tarihi: %1"
-
-#: lib/pilotDateEntry.cpp:185
-msgid "Whole-day event"
-msgstr "Tüm gün olayı"
-
-#: lib/pilotDateEntry.cpp:193
-#, c-format
-msgid "End date: %1"
-msgstr "Bitiş tarihi: %1"
-
-#: lib/pilotDateEntry.cpp:200
-msgid ""
-"_: %1 is the duration, %2 is the time unit\n"
-"Alarm: %1 %2 before event starts"
-msgstr ""
-
-#: lib/pilotDateEntry.cpp:204
-msgid "minutes"
-msgstr "dakika"
-
-#: lib/pilotDateEntry.cpp:205
-msgid "hours"
-msgstr "saat"
-
-#: lib/pilotDateEntry.cpp:206
-msgid "days"
-msgstr "gün"
-
-#: lib/pilotDateEntry.cpp:216
-msgid "Recurrence: every %1 %2"
-msgstr "Tekrar: her %1 %2"
-
-#: lib/pilotDateEntry.cpp:222
-msgid "day(s)"
-msgstr "günde bir"
-
-#: lib/pilotDateEntry.cpp:223
-msgid "week(s)"
-msgstr "haftada bir"
-
-#: lib/pilotDateEntry.cpp:225
-msgid "month(s)"
-msgstr "ayda bir"
-
-#: lib/pilotDateEntry.cpp:226
-msgid "year(s)"
-msgstr "yılda bir"
-
-#: lib/pilotDateEntry.cpp:235
-msgid "Repeats indefinitely"
-msgstr "Sonsuza kadar tekrar eder"
-
-#: lib/pilotDateEntry.cpp:240
-#, c-format
-msgid "Until %1"
-msgstr "Araç %1"
-
-#: lib/pilotDateEntry.cpp:244
-msgid "Repeating on the i-th day of week j"
-msgstr ""
-
-#: lib/pilotDateEntry.cpp:245
-msgid "Repeating on the n-th day of the month"
-msgstr ""
-
-#: lib/pilotDateEntry.cpp:263
-msgid "Exceptions:"
-msgstr "İstisnalar:"
-
-#: lib/pilotDateEntry.cpp:277 lib/pilotTodoEntry.cpp:158
-msgid "<b><em>Note:</em></b><br>"
-msgstr "<b><em>Not:</em></b><br>"
-
-#: lib/pilotDateEntry.cpp:277 lib/pilotTodoEntry.cpp:158
-msgid "Note:\n"
-msgstr "Not:\n"
-
-#: lib/pilotMemo.cpp:81
-msgid ""
-"<i>Title:</i> %1<br>\n"
-"<i>MemoText:</i><br>%2"
-msgstr ""
-"<i>Başlık:</i> %1<br>\n"
-"<i>Hatırlatma metni:</i><br>%2"
-
-#: lib/pilotMemo.cpp:86
-msgid ""
-"Title: %1\n"
-"MemoText:\n"
-"%2"
-msgstr ""
-"Başlık: %1\n"
-"Hafıza Metni:\n"
-"%2"
-
-#: lib/pilotTodoEntry.cpp:133
-msgid "Completed"
-msgstr "Tamamlanmış"
-
-#: lib/pilotTodoEntry.cpp:135
-msgid "Not completed"
-msgstr "Tamamlanmamış"
-
-#: lib/pilotTodoEntry.cpp:143
-#, c-format
-msgid "Due date: %1"
-msgstr "Son tarih: %1"
-
-#: lib/pilotTodoEntry.cpp:151
-#, c-format
-msgid "Priority: %1"
-msgstr "Öncelik: %1"
-
-#: lib/plugin.cpp:73
-msgid "Unnamed"
-msgstr "İsimsiz"
-
-#: lib/plugin.cpp:93
-msgid ""
-"<qt>The <i>%1</i> conduit's settings have been changed. Do you want to save "
-"the changes before continuing?</qt>"
-msgstr ""
-"<qt><i>%1</i> bağlantı ayarları değiştirildi. Devam etmeden önce "
-"değişiklikleri saklamak ister misiniz?</qt>"
-
-#: lib/plugin.cpp:105
-msgid "%1 Conduit"
-msgstr "%1 Bağlantısı"
-
-#: lib/plugin.cpp:144
-msgid "Send questions and comments to tdepim-users@kde.org"
-msgstr "Soru ve yorumlarınızı tdepim-users@kde.org adresine gönderin"
-
-#: lib/plugin.cpp:194
-msgid "Send questions and comments to <a href=\"mailto:%1\">%2</a>."
-msgstr "Soru ve yorumlarınızı <a href=\"mailto:%1\">%2</a> adresine gönderin."
-
-#: lib/plugin.cpp:198
-msgid "Send bug reports to <a href=\"mailto:%1\">%2</a>."
-msgstr "Hata raporlarını <a href=\"mailto:%1\">%2</a> adresine gönderin."
-
-#: lib/plugin.cpp:202
-msgid ""
-"For trademark information, see the <a href=\"help:/kpilot/trademarks.html"
-"\">KPilot User's Guide</a>."
-msgstr ""
-"Ticari marka bilgisi için, <a href=\"help:/kpilot/trademarks.html\">KPilot "
-"Kullanıcı Rehberi</a>'ne göz atın."
-
-#: lib/plugin.cpp:213
-msgid "<b>Authors:</b> "
-msgstr "<b>Yazarlar:</b> "
-
-#: lib/plugin.cpp:234
-msgid "<b>Credits:</b> "
-msgstr "<b>Destekleyenler:</b> "
-
-#: lib/plugin.cpp:480
-msgid "Large Changes Detected"
-msgstr ""
-
-#: lib/plugin.cpp:482
-msgid ""
-"The %1 conduit has made a large number of changes to your %2.  Do you want "
-"to allow this change?\n"
-"Details:\n"
-"\t%3"
-msgstr ""
-
-#: lib/plugin.cpp:536
-#, c-format
-msgid "Could not find conduit %1."
-msgstr "%1 kanalı bulunamadı."
-
-#: lib/plugin.cpp:559
-#, c-format
-msgid "Could not load conduit %1."
-msgstr "%1 kanalı yüklenemedi."
-
-#: lib/plugin.cpp:571
-msgid "Conduit %1 has wrong version (%2)."
-msgstr ""
-
-#: lib/plugin.cpp:581
-#, c-format
-msgid "Could not initialize conduit %1."
-msgstr "%1 kanalı başlatılamadı."
-
-#: lib/plugin.cpp:594 lib/plugin.cpp:603
-#, c-format
-msgid "Could not create conduit %1."
-msgstr "%1 kanalı oluşturulamadı."
-
-#: lib/plugin.cpp:607
-msgid "[Conduit %1]"
-msgstr "[Kanal %1]"
-
-#: lib/plugin.cpp:749
-msgid "Start: %1. End: %2. "
-msgstr "Başlangıç: %1. Bitiş: %2."
-
-#: lib/plugin.cpp:751
-msgid "%1 new. "
-msgstr "%1 yeni."
-
-#: lib/plugin.cpp:752
-msgid "%1 changed. "
-msgstr "%1 değiştirildi."
-
-#: lib/plugin.cpp:753
-msgid "%1 deleted. "
-msgstr "%1 silindi."
-
-#: lib/plugin.cpp:755
-msgid "No changes made. "
-msgstr "Değişiklik yapılmadı."
-
-#: lib/recordConduit.cpp:69 lib/recordConduit.cpp:289
-#, fuzzy
-msgid "Unable to open the %1 database on the handheld."
-msgstr "El bilgisayarı üzerindeki veritabanı açılamadı."
-
-#: lib/recordConduit.cpp:295
-#, c-format
-msgid "Unable to open %1."
-msgstr "%1 açılamadı."
-
-#: lib/syncAction.cpp:103
-msgid "The conduit %1 could not be executed."
-msgstr "%1 bağlantısı oluşturulamadı."
-
-#: lib/syncAction.cpp:205
-msgid "Full Synchronization"
-msgstr ""
-
-#: lib/syncAction.cpp:209
-msgid "Restore From Backup"
-msgstr ""
-
-#: lib/syncAction.cpp:220
-msgid "Test Sync"
-msgstr "Test Eşzamanlaması"
-
-#: lib/syncAction.cpp:224
-msgid "Local Sync"
-msgstr "Yerel Eşzamanlama"
-
-#: lib/syncAction.cpp:316 lib/syncAction.cpp:428
-msgid "Question"
-msgstr "Soru"
-
-#: lib/syncAction.cpp:335 lib/syncAction.cpp:448
-msgid "&Do not ask again"
-msgstr "&Tekrar sorma"
-
-#: lib/syncAction.cpp:369 lib/syncAction.cpp:481
-msgid "Do not ask again"
-msgstr "Tekrar sorma"
-
-#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:18
-#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:32
-#, no-c-format
-msgid "KPilot Custom Fields"
-msgstr "KPilot Özel Alanları"
-
-#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:35
-#, no-c-format
-msgid ""
-"On your handheld, each address also provides four custom fields for your "
-"personal use. KPilot can sync these either to birthdate, URL, IM address, or "
-"just store them as a custom field on your PC with no special meaning. In the "
-"last case, you can change the values here. Note, however, that for all other "
-"settings the values entered here will have no effect."
-msgstr ""
-
-#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:46
-#, no-c-format
-msgid "Custom &3:"
-msgstr "Özel &3:"
-
-#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:52
-#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:74
-#, no-c-format
-msgid ""
-"<qt>Edit or enter the value of the third custom field here. Using KPilot, "
-"you can synchronize these values with the handheld's Address application "
-"custom fields.</qt>"
-msgstr ""
-
-#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:60
-#, no-c-format
-msgid "Custom &4:"
-msgstr "Özel &4:"
-
-#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:66
-#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:90
-#, no-c-format
-msgid ""
-"<qt>Edit or enter the value of the fourth custom field here. Using KPilot, "
-"you can synchronize these values with the handheld's Address application "
-"custom fields.</qt>"
-msgstr ""
-
-#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:82
-#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:104
-#, no-c-format
-msgid ""
-"<qt>Edit or enter the value of the second custom field here. Using KPilot, "
-"you can synchronize these values with the handheld's Address application "
-"custom fields.</qt>"
-msgstr ""
-
-#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:98
-#, no-c-format
-msgid "Custom &2:"
-msgstr "Özel &2:"
-
-#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:112
-#, no-c-format
-msgid "Custom &1:"
-msgstr "Özel &1:"
-
-#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:118
-#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:134
-#, no-c-format
-msgid ""
-"<qt>Edit or enter the value of the first custom field here. Using KPilot, "
-"you can synchronize these values with the handheld's Address application "
-"custom fields.</qt>"
-msgstr ""
-
-#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:142
-#, no-c-format
-msgid ""
-"If you let KPilot sync the handheld's custom fields as custom fields on the "
-"PC, you can change the values here. Note, however, that for all other "
-"settings the values entered here will have no effect."
-msgstr ""
-
-#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:158
-#, no-c-format
-msgid "KPilot's Private (meta-sync) Settings"
-msgstr ""
-
-#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:169
-#, no-c-format
-msgid "Record&ID:"
-msgstr "Kayıt &No:"
-
-#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:180
-#, no-c-format
-msgid "Sync &flag:"
-msgstr ""
-
-#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:225
-#, no-c-format
-msgid ""
-"These values indicate the state of the record for KPilot, and connect an "
-"entry on the handheld with an entry on the PC.\n"
-"Do NOT change these values: doing so will almost certainly result in data "
-"loss when you next do a sync."
-msgstr ""
-
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:66
-#: conduits/vcalconduit/korganizerConduit.ui:94
-#, no-c-format
-msgid "Sync Destination"
-msgstr ""
-
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:77
-#, no-c-format
-msgid "&Standard addressbook"
-msgstr ""
-
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:80
-#, no-c-format
-msgid ""
-"<qt>Select this option to synchronize with TDE's standard addressbook (i.e. "
-"the addressbook that you edit in KAddressBook, and which you use in KMail)</"
-"qt>"
-msgstr ""
-
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:91
-#, no-c-format
-msgid "vCard &file:"
-msgstr ""
-
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:94
-#, no-c-format
-msgid ""
-"<qt>Select this option to use a specific address book file, instead of the "
-"standard TDE address book. This file must be in the vCard format (.vcf). "
-"Type the location of this file in the edit box or select it clicking the "
-"file picker button.</qt>"
-msgstr ""
-
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:113
-#, no-c-format
-msgid ""
-"<qt>Enter the vCard file name here or select it by clicking the file picker "
-"button. vCard is a standard format for exchanging contact information. </qt>"
-msgstr ""
-
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:123
-#, no-c-format
-msgid "Store &archived records in the TDE addressbook"
-msgstr ""
-
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:126
-#, no-c-format
-msgid ""
-"<qt>If you delete an address on your handheld, you can determine if it "
-"should be archived on the PC. If you check that and this checkbox, the "
-"address will be added to your addressbook, but no longer synchronized with "
-"the handheld.</qt>"
-msgstr ""
-
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:136
-#: conduits/docconduit/doc-setupdialog.ui:390
-#: conduits/vcalconduit/korganizerConduit.ui:165
-#, no-c-format
-msgid "Conflicts"
-msgstr "Çakışmalar"
-
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:166
-#: conduits/vcalconduit/korganizerConduit.ui:184
-#: kpilot/kpilotConfigDialog_sync.ui:148
-#, no-c-format
-msgid "Conflict &resolution:"
-msgstr ""
-
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:172
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:218
-#, no-c-format
-msgid ""
-"<qt>Select in this list how conflicting entries (entries which were edited "
-"both on your handheld and on the PC) are resolved. Possibly values are \"Use "
-"KPilot's Global Setting\" to use the settings defined in KPilot HotSync "
-"configuration, \"Ask User\" to let you decide case by case, \"Do Nothing\" "
-"to allow the entries to be different, \"PC overrides\", \"Handheld overrides"
-"\", \"Use values from last sync\" and \"Use both entries\" to create a new "
-"entry on both the PC and handheld.</qt>"
-msgstr ""
-
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:178
-#: conduits/vcalconduit/korganizerConduit.ui:193
-#, no-c-format
-msgid "Use KPilot's Global Setting"
-msgstr ""
-
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:183
-#: conduits/vcalconduit/korganizerConduit.ui:198
-#: kpilot/kpilotConfigDialog_sync.ui:100
-#, no-c-format
-msgid "Ask User"
-msgstr ""
-
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:188
-#: conduits/vcalconduit/korganizerConduit.ui:203
-#: kpilot/kpilotConfigDialog_sync.ui:105
-#, no-c-format
-msgid "Do Nothing"
-msgstr ""
-
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:193
-#: conduits/vcalconduit/korganizerConduit.ui:208
-#: kpilot/kpilotConfigDialog_sync.ui:110
-#, no-c-format
-msgid "Handheld Overrides"
-msgstr ""
-
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:198
-#: conduits/vcalconduit/korganizerConduit.ui:213
-#: kpilot/kpilotConfigDialog_sync.ui:115
-#, no-c-format
-msgid "PC Overrides"
-msgstr "Üstüne Yaz"
-
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:203
-#: conduits/vcalconduit/korganizerConduit.ui:218
-#: kpilot/kpilotConfigDialog_sync.ui:120
-#, no-c-format
-msgid "Values From Last Sync (if possible)"
-msgstr ""
-
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:208
-#: conduits/vcalconduit/korganizerConduit.ui:223
-#: kpilot/kpilotConfigDialog_sync.ui:125
-#, no-c-format
-msgid "Use Both Entries"
-msgstr ""
-
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:226
-#, no-c-format
-msgid ""
-"<p>Select the default action if an event was modified on both sides here. </"
-"p>"
-msgstr ""
-
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:258
-#, no-c-format
-msgid "Fields"
-msgstr "Alanlar"
-
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:275
-#, no-c-format
-msgid "Handheld other phone:"
-msgstr ""
-
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:278
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:334
-#, no-c-format
-msgid ""
-"<qt>Select which KAddressBook field should be used to store the Pilot's "
-"&quot;Other&quot; phone here.</qt>"
-msgstr ""
-
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:284
-#, no-c-format
-msgid "Other Phone"
-msgstr ""
-
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:289
-#, no-c-format
-msgid "Assistant"
-msgstr ""
-
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:294
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:385
-#, no-c-format
-msgid "Business Fax"
-msgstr ""
-
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:299
-#, no-c-format
-msgid "Car Phone"
-msgstr ""
-
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:304
-#, no-c-format
-msgid "Email 2"
-msgstr "E-posta 2"
-
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:309
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:380
-#, no-c-format
-msgid "Home Fax"
-msgstr ""
-
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:314
-#, no-c-format
-msgid "Telex"
-msgstr "Telex"
-
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:319
-#, no-c-format
-msgid "TTY/TTD Phone"
-msgstr ""
-
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:342
-#, no-c-format
-msgid "Handheld street address:"
-msgstr ""
-
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:345
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:363
-#, no-c-format
-msgid ""
-"<qt>Select which KAddressBook field should be used to store the Pilot's "
-"Street Address here.</qt>"
-msgstr ""
-
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:351
-#, no-c-format
-msgid "Preferred, then Home Address"
-msgstr ""
-
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:356
-#, no-c-format
-msgid "Preferred, then Business Address"
-msgstr ""
-
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:371
-#, no-c-format
-msgid "Handheld fax:"
-msgstr ""
-
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:374
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:392
-#, no-c-format
-msgid ""
-"<qt>Select which KAddressBook field should be used to store the Fax number "
-"from the Pilot here.</qt>"
-msgstr ""
-
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:419
-#, no-c-format
-msgid "Custom Fields"
-msgstr ""
-
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:438
-#, no-c-format
-msgid "Handheld custom field 1:"
-msgstr ""
-
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:441
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:510
-#, no-c-format
-msgid ""
-"<qt>Select the field from this list that represents best the meaning given "
-"by your use of the first custom field on your handheld.</qt>"
-msgstr ""
-
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:449
-#, no-c-format
-msgid "Handheld custom field 2:"
-msgstr ""
-
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:452
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:546
-#, no-c-format
-msgid ""
-"<qt>Select the field from this list that represents best the meaning given "
-"by your use of the second custom field on your handheld.</qt>"
-msgstr ""
-
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:460
-#, no-c-format
-msgid "Handheld custom field 3:"
-msgstr ""
-
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:463
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:582
-#, no-c-format
-msgid ""
-"<qt>Select the field from this list that represents best the meaning given "
-"by your use of the third custom field on your handheld.</qt>"
-msgstr ""
-
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:471
-#, no-c-format
-msgid "Handheld custom field 4:"
-msgstr ""
-
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:474
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:618
-#, no-c-format
-msgid ""
-"<qt>Select the field from this list that represents best the meaning given "
-"by your use of the fourth custom field on your handheld.</qt>"
-msgstr ""
-
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:480
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:516
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:552
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:588
-#, no-c-format
-msgid "Store as Custom Field"
-msgstr ""
-
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:485
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:521
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:557
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:593
-#, no-c-format
-msgid "Birthdate"
-msgstr ""
-
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:490
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:526
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:562
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:598
-#, no-c-format
-msgid "URL"
-msgstr ""
-
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:495
-#, no-c-format
-msgid "IM Address (ICQ, MS, ...)"
-msgstr ""
-
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:531
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:567
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:603
-#, no-c-format
-msgid "IM Address (ICQ, MSN, ...)"
-msgstr ""
-
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:640
-#, no-c-format
-msgid "Date &format:"
-msgstr ""
-
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:646
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:700
-#, no-c-format
-msgid ""
-"<qt>Select the birthdate format here, if you selected \"birthdate\" for any "
-"of the custom fields above. Possible placeholders are:<br> %d for the day, "
-"%m for the month, %y for the two-digit year, %Y for the four-digit year. "
-"For  example, %d.%m.%Y would generate a date like 27.3.1952, while %m/%d/%y "
-"would write the same date as 03/27/52. </qt>"
-msgstr ""
-
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:652
-#, no-c-format
-msgid "Locale Settings"
-msgstr "Yerel dil ayarları"
-
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:657
-#, no-c-format
-msgid "%d.%m.%Y"
-msgstr "%d.%m.%Y"
-
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:662
-#, no-c-format
-msgid "%d.%m.%y"
-msgstr "%d.%m.%y"
-
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:667
-#, no-c-format
-msgid "%d/%m/%Y"
-msgstr "%d/%m/%Y"
-
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:672
-#, no-c-format
-msgid "%d/%m/%y"
-msgstr "%d/%m/%y"
-
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:677
-#, no-c-format
-msgid "%m/%d/%Y"
-msgstr "%m/%d/%Y"
-
-#: conduits/abbrowserconduit/kaddressbookConduit.ui:682
-#, no-c-format
-msgid "%m/%d/%y"
-msgstr "%m/%d/%y"
-
-#: conduits/abbrowserconduit/resolutionDialog_base.ui:16
-#, no-c-format
-msgid "widget2"
-msgstr ""
-
-#: conduits/abbrowserconduit/resolutionDialog_base.ui:27
-#, no-c-format
-msgid ""
-"The following record was edited both on the handheld and on the PC. Please "
-"choose which values shall be synced:"
-msgstr ""
-
-#: conduits/abbrowserconduit/resolutionDialog_base.ui:36
-#, no-c-format
-msgid "Field"
-msgstr "Alan"
-
-#: conduits/abbrowserconduit/resolutionDialog_base.ui:55
-#, no-c-format
-msgid ""
-"<qt>Use this list to resolve, field by field, the conflicts created when a "
-"record was edited both on the handheld and on the PC. For each record, the "
-"different values from the last sync, the handheld and PC are displayed for "
-"each field, allowing you to choose the desired value.</qt>"
-msgstr ""
-
-#: conduits/abbrowserconduit/resolutionDialog_base.ui:63
-#, no-c-format
-msgid ""
-"Line breaks in any of the entries are denoted by a \" | \" (without the "
-"quotes)."
-msgstr ""
-
-#: conduits/abbrowserconduit/resolutionDialog_base.ui:85
-#, no-c-format
-msgid "&Keep Both"
-msgstr ""
-
-#: conduits/abbrowserconduit/resolutionDialog_base.ui:88
-#, no-c-format
-msgid ""
-"<qt>Click this button to use both values, resulting in the duplication of "
-"the record.</qt>"
-msgstr ""
-
-#: conduits/abbrowserconduit/resolutionDialog_base.ui:96
-#, no-c-format
-msgid "&PC Values"
-msgstr ""
-
-#: conduits/abbrowserconduit/resolutionDialog_base.ui:99
-#, no-c-format
-msgid ""
-"<qt>Click this button to use the PC values for synchronizing all conflicting "
-"fields in this record.</qt>"
-msgstr ""
-
-#: conduits/abbrowserconduit/resolutionDialog_base.ui:107
-#, no-c-format
-msgid "&Last Sync Values"
-msgstr ""
-
-#: conduits/abbrowserconduit/resolutionDialog_base.ui:110
-#, no-c-format
-msgid ""
-"<qt>Click this button to use the last sync values (old values) for "
-"synchronizing all conflicting fields in this record.</qt>"
-msgstr ""
-
-#: conduits/abbrowserconduit/resolutionDialog_base.ui:118
-#, no-c-format
-msgid "&Handheld Values"
-msgstr ""
-
-#: conduits/abbrowserconduit/resolutionDialog_base.ui:121
-#, no-c-format
-msgid ""
-"<qt>Click this button to use the handheld values for synchronizing all "
-"conflicting fields in this record.</qt>"
-msgstr ""
-
-#: conduits/docconduit/doc-setupdialog.ui:54
-#, no-c-format
-msgid "&Text files:"
-msgstr ""
-
-#: conduits/docconduit/doc-setupdialog.ui:60
-#: conduits/docconduit/doc-setupdialog.ui:82
-#, no-c-format
-msgid ""
-"<qt>Enter here, or select clicking the file picker button, the name and "
-"location of the folder used to find and synchronize text files. All files "
-"with extension .txt located in this folder will be synced to Palm DOC "
-"databases in your handheld.</qt>"
-msgstr ""
-
-#: conduits/docconduit/doc-setupdialog.ui:68
-#, no-c-format
-msgid "Local co&py:"
-msgstr ""
-
-#: conduits/docconduit/doc-setupdialog.ui:74
-#, no-c-format
-msgid ""
-"<qt>Check this box if you want to save a copy of the Palm DOC databases (."
-"pdb files) on your PC.</qt>"
-msgstr ""
-
-#: conduits/docconduit/doc-setupdialog.ui:90
-#, no-c-format
-msgid "Synchronization Mode"
-msgstr ""
-
-#: conduits/docconduit/doc-setupdialog.ui:107
-#, no-c-format
-msgid "Sync only P&C to PDA"
-msgstr ""
-
-#: conduits/docconduit/doc-setupdialog.ui:113
-#, no-c-format
-msgid ""
-"<qt>Select this option to synchronize texts changed in your PC to Palm DOC "
-"databases in your handheld. Palm DOC databases modified in the handheld will "
-"not be converted to text files, but texts changed in the PC will be "
-"converted to the Palm DOC databases.</qt>"
-msgstr ""
-
-#: conduits/docconduit/doc-setupdialog.ui:121
-#, no-c-format
-msgid "Sync only P&DA to PC"
-msgstr ""
-
-#: conduits/docconduit/doc-setupdialog.ui:124
-#, no-c-format
-msgid ""
-"<qt>Select this option to synchronize the changes made to Palm DOC databases "
-"in your handheld to the PC text files. Palm DOC databases modified in the "
-"handheld will be converted to text files, but texts changed in the PC will "
-"not be converted to the Palm DOC databases.</qt>"
-msgstr ""
-
-#: conduits/docconduit/doc-setupdialog.ui:132
-#, no-c-format
-msgid "Sync &all"
-msgstr ""
-
-#: conduits/docconduit/doc-setupdialog.ui:141
-#, no-c-format
-msgid ""
-"<qt>Select this option to synchronize the file texts in your PC to Palm DOC "
-"databases in your handheld. Palm DOC databases modified in the handheld will "
-"be converted to text files, and texts changed in the PC will be converted to "
-"the Palm DOC databases, keeping both versions in sync.</qt>"
-msgstr ""
-
-#: conduits/docconduit/doc-setupdialog.ui:168
-#, no-c-format
-msgid ""
-"<qt>Enter here, or select clicking the file picker button, the name and "
-"location of the folder where copies of the handheld databases are kept (.pdb "
-"files). Local copies are only made if the box is checked as well.</qt>"
-msgstr ""
-
-#: conduits/docconduit/doc-setupdialog.ui:178
-#: conduits/docconduit/kpalmdoc_dlgbase.ui:168
-#, no-c-format
-msgid "PC -> Handheld"
-msgstr ""
-
-#: conduits/docconduit/doc-setupdialog.ui:189
-#: conduits/docconduit/kpalmdoc_dlgbase.ui:255
-#, no-c-format
-msgid "&Compress"
-msgstr ""
-
-#: conduits/docconduit/doc-setupdialog.ui:195
-#: conduits/docconduit/kpalmdoc_dlgbase.ui:261
-#, no-c-format
-msgid ""
-"Check this box, if the text should be compressed on the handheld to save "
-"memory. Most doc reader on the handheld support compressed texts."
-msgstr ""
-
-#: conduits/docconduit/doc-setupdialog.ui:198
-#, no-c-format
-msgid ""
-"<qt>The Palm DOC format supports compressing the text to save memory. Check "
-"this box to enable text compression, so the resulting Palm DOC database will "
-"consume about 50% less memory than in uncompressed state. Almost all DOC "
-"readers on the Palm support compressed texts.</qt>"
-msgstr ""
-
-#: conduits/docconduit/doc-setupdialog.ui:206
-#: conduits/docconduit/kpalmdoc_dlgbase.ui:272
-#, no-c-format
-msgid "Convert &bookmarks"
-msgstr ""
-
-#: conduits/docconduit/doc-setupdialog.ui:212
-#, no-c-format
-msgid ""
-"<qt>Check this box to enable bookmark creation when converting text files to "
-"Palm DOC databases. Most doc readers support bookmarks. In order to create a "
-"bookmark, it is necessary to to provide the location in the text where the "
-"bookmark should be set and the bookmark title, in at least one of the "
-"formats listed below.</qt>"
-msgstr ""
-
-#: conduits/docconduit/doc-setupdialog.ui:237
-#: conduits/docconduit/kpalmdoc_dlgbase.ui:230
-#, no-c-format
-msgid "&Inline tags in text"
-msgstr ""
-
-#: conduits/docconduit/doc-setupdialog.ui:243
-#, no-c-format
-msgid ""
-"Check this box to create bookmarks from inline tags in the text. The inline "
-"tag consist of tags in the form <* bookmarktext *>. The bookmark location is "
-"set using the location of the inline tag in the text, and  the name is the "
-"text between the <* and the *>. The inline tag (<*...*>) will be removed "
-"from the text."
-msgstr ""
-
-#: conduits/docconduit/doc-setupdialog.ui:251
-#: conduits/docconduit/kpalmdoc_dlgbase.ui:155
-#, no-c-format
-msgid "&Encoding:"
-msgstr ""
-
-#: conduits/docconduit/doc-setupdialog.ui:262
-#: conduits/docconduit/kpalmdoc_dlgbase.ui:244
-#, no-c-format
-msgid "&Tags at end of text"
-msgstr ""
-
-#: conduits/docconduit/doc-setupdialog.ui:265
-#, no-c-format
-msgid ""
-"Check this box to convert tags of the form <bookmarkname> at the end of the "
-"text to bookmarks. The text inside the tag (\"bookmarkname\") will be "
-"searched in the text, and whenever found, a bookmark will be set there. The "
-"endtags <...> will then be removed from the end of the text."
-msgstr ""
-
-#: conduits/docconduit/doc-setupdialog.ui:273
-#: conduits/docconduit/kpalmdoc_dlgbase.ui:286
-#, no-c-format
-msgid "Regular &expressions in .bmk file"
-msgstr ""
-
-#: conduits/docconduit/doc-setupdialog.ui:276
-#, no-c-format
-msgid ""
-"<qt>Check this box to use regular expressions in a file to search the text "
-"for bookmarks. The file should have the same name as the text file, but "
-"should end in .bmk instead of .txt (for instance, the regular expression "
-"file for textname.txt should be textname.bmk). See the documentation for a "
-"description of the format of the bmk file.</qt>"
-msgstr ""
-
-#: conduits/docconduit/doc-setupdialog.ui:291
-#: conduits/docconduit/kpalmdoc_dlgbase.ui:316
-#, no-c-format
-msgid "Handheld -> PC"
-msgstr ""
-
-#: conduits/docconduit/doc-setupdialog.ui:319
-#, no-c-format
-msgid "Do not convert, if text unchanged (only bookmarks)"
-msgstr ""
-
-#: conduits/docconduit/doc-setupdialog.ui:322
-#, no-c-format
-msgid ""
-"<qt>Check this box to avoid syncing the text on the handheld to the PC if "
-"you only changed the bookmarks on the handheld (but not the text).</qt>"
-msgstr ""
-
-#: conduits/docconduit/doc-setupdialog.ui:330
-#: conduits/docconduit/kpalmdoc_dlgbase.ui:344
-#, no-c-format
-msgid "Convert Bookmarks"
-msgstr ""
-
-#: conduits/docconduit/doc-setupdialog.ui:341
-#: conduits/docconduit/kpalmdoc_dlgbase.ui:372
-#, no-c-format
-msgid "Do &not convert bookmarks"
-msgstr "Yer imlerini &dönüştürme"
-
-#: conduits/docconduit/doc-setupdialog.ui:347
-#, no-c-format
-msgid ""
-"<qt>Check this box to avoid converting Palm DOC bookmarks to inline tags or "
-"to a bookmark file.</qt>"
-msgstr ""
-
-#: conduits/docconduit/doc-setupdialog.ui:355
-#, no-c-format
-msgid "Convert into .bm &file"
-msgstr ""
-
-#: conduits/docconduit/doc-setupdialog.ui:364
-#, no-c-format
-msgid ""
-"<qt>Check this box to convert the Palm DOC database bookmarks to a separate "
-"file, in the bmk format (see more about this format in the documentation). "
-"The resulting bookmark file shares the same filename as the resulting .txt "
-"file, but ends in .bmk instead. This approach creates a clean text file and "
-"a bookmark file.</qt>"
-msgstr ""
-
-#: conduits/docconduit/doc-setupdialog.ui:372
-#: conduits/docconduit/kpalmdoc_dlgbase.ui:358
-#, no-c-format
-msgid "Convert as &inline tags"
-msgstr ""
-
-#: conduits/docconduit/doc-setupdialog.ui:378
-#, no-c-format
-msgid ""
-"<qt>Check this box to convert the Palm DOC database bookmarks to inline "
-"tags, in the form &lt;* BookmarkName *&gt;. These tags are inserted in the "
-"text in the position marked by the bookmark, and the text inside the tag "
-"corresponds to the bookmark name. Inline tags are easy to create, delete, "
-"move and edit.</qt>"
-msgstr ""
-
-#: conduits/docconduit/doc-setupdialog.ui:404
-#, no-c-format
-msgid ""
-"If the same text was changed on the PC and the handheld, which of the two "
-"versions should be used as the new version?"
-msgstr ""
-
-#: conduits/docconduit/doc-setupdialog.ui:407
-#, no-c-format
-msgid ""
-"<qt>The Palm DOC conduit does not feature merging the modifications when a "
-"text is changed both in the handheld and in the computer. Therefore, the "
-"choice is between working with the files out of sync, or discarding the "
-"changes in one of them.</qt>"
-msgstr ""
-
-#: conduits/docconduit/doc-setupdialog.ui:418
-#, no-c-format
-msgid "&No resolution"
-msgstr ""
-
-#: conduits/docconduit/doc-setupdialog.ui:424
-#, no-c-format
-msgid ""
-"<qt>The Palm DOC conduit does not feature merging the modifications when a "
-"text is changed both in the handheld and in the computer. Therefore, when "
-"conflicts appear, the choice is between working with the files out of sync, "
-"or discarding the changes in one of them. Select this option to prevent "
-"KPilot from overwriting your modifications.</qt>"
-msgstr ""
-
-#: conduits/docconduit/doc-setupdialog.ui:432
-#, no-c-format
-msgid "P&DA overrides"
-msgstr ""
-
-#: conduits/docconduit/doc-setupdialog.ui:438
-#, no-c-format
-msgid ""
-"<qt>The Palm DOC conduit does not feature merging the modifications when a "
-"text is changed both in the handheld and in the computer. Therefore, when "
-"conflicts appear, the choice is between working with the files out of sync, "
-"or discarding the changes in one of them. Select this option to make the PDA "
-"version overwrite the PC version in case of conflict.</qt>"
-msgstr ""
-
-#: conduits/docconduit/doc-setupdialog.ui:446
-#, no-c-format
-msgid "P&C overrides"
-msgstr ""
-
-#: conduits/docconduit/doc-setupdialog.ui:452
-#, no-c-format
-msgid ""
-"<qt>The Palm DOC conduit does not feature merging the modifications when a "
-"text is changed both in the handheld and in the computer. Therefore, when "
-"conflicts appear, the choice is between working with the files out of sync, "
-"or discarding the changes in one of them. Select this option to make the PC "
-"version overwrite the PDA version in case of conflict.</qt>"
-msgstr ""
-
-#: conduits/docconduit/doc-setupdialog.ui:460
-#, no-c-format
-msgid "&Ask the user"
-msgstr ""
-
-#: conduits/docconduit/doc-setupdialog.ui:469
-#, no-c-format
-msgid ""
-"<qt>The Palm DOC conduit does not feature merging the modifications when a "
-"text is changed both in the handheld and in the computer. Therefore, when "
-"conflicts appear, the choice is between working with the files out of sync, "
-"or discarding the changes in one of them. Select this option to show the "
-"resolution dialog to let the user decide on a case by case basis.</qt>"
-msgstr ""
-
-#: conduits/docconduit/doc-setupdialog.ui:479
-#, no-c-format
-msgid "&Always show the resolution dialog"
-msgstr ""
-
-#: conduits/docconduit/doc-setupdialog.ui:482
-#, no-c-format
-msgid ""
-"<qt>Check this box to force the resolution dialog to appear even when there "
-"are no conflicts.</qt>"
-msgstr ""
-
-#: conduits/docconduit/kpalmdoc_dlgbase.ui:47
-#, no-c-format
-msgid "&PalmDOC file:"
-msgstr ""
-
-#: conduits/docconduit/kpalmdoc_dlgbase.ui:77
-#, no-c-format
-msgid "Convert whole &folders"
-msgstr ""
-
-#: conduits/docconduit/kpalmdoc_dlgbase.ui:85
-#, no-c-format
-msgid ""
-"Folder where copies of the handheld databases are kept. You can install them "
-"to any PalmOS handheld, and distribute these copies to other people (but "
-"beware of copyright infringement)."
-msgstr ""
-
-#: conduits/docconduit/kpalmdoc_dlgbase.ui:93
-#, no-c-format
-msgid "&Ask before overwriting files"
-msgstr ""
-
-#: conduits/docconduit/kpalmdoc_dlgbase.ui:101
-#, no-c-format
-msgid "&Verbose messages"
-msgstr ""
-
-#: conduits/docconduit/kpalmdoc_dlgbase.ui:109
-#, no-c-format
-msgid "Convert Text to PalmDOC"
-msgstr ""
-
-#: conduits/docconduit/kpalmdoc_dlgbase.ui:117
-#, no-c-format
-msgid "Convert PalmDOC to Text"
-msgstr ""
-
-#: conduits/docconduit/kpalmdoc_dlgbase.ui:142
-#, no-c-format
-msgid ""
-"Enter the name of the folder where the text files reside on the PC. All "
-"files with extension .txt will be synced to the handheld."
-msgstr ""
-
-#: conduits/docconduit/kpalmdoc_dlgbase.ui:236
-#, no-c-format
-msgid ""
-"When a <* bookmarktext *> appears somewhere in the text, a bookmark will be "
-"set at this position, and the text between the <* and the *> will be used as "
-"bookmark name. The <*...*> will be removed from the text."
-msgstr ""
-
-#: conduits/docconduit/kpalmdoc_dlgbase.ui:247
-#, no-c-format
-msgid ""
-"Tags of the form <bookmarkname> at the end of the text will be used to "
-"search the text for the pattern between the < and >. Whenever \"bookmarkname"
-"\" appears in the text, a bookmark will be set there. The endtags <...> will "
-"then be removed from the end of the text."
-msgstr ""
-
-#: conduits/docconduit/kpalmdoc_dlgbase.ui:264
-#, no-c-format
-msgid ""
-"The Palm doc format supports compressing the text to save memory. If you "
-"check this box, the text will consume about 50% less memory than in "
-"uncompressed state. Almost all DOC readers on the Palm support compressed "
-"texts."
-msgstr ""
-
-#: conduits/docconduit/kpalmdoc_dlgbase.ui:278
-#, no-c-format
-msgid ""
-"Do you want to convert bookmarks? Most doc readers support bookmarks. You "
-"have to provide some information about where the bookmarks should be set and "
-"their titles. Check at least one of the bookmark types below."
-msgstr ""
-
-#: conduits/docconduit/kpalmdoc_dlgbase.ui:289
-#, no-c-format
-msgid ""
-"Use regular expressions in a file textname.bmk (textname.txt is the filename "
-"of the text) to search the text for bookmarks.See the documentation for a "
-"description of the format of the bmk file."
-msgstr ""
-
-#: conduits/docconduit/kpalmdoc_dlgbase.ui:386
-#, no-c-format
-msgid "Convert as &end tags"
-msgstr ""
-
-#: conduits/docconduit/kpalmdoc_dlgbase.ui:394
-#, no-c-format
-msgid "Convert into .bmk &file"
-msgstr ""
-
-#: conduits/knotes/knotesconduit.kcfg:12
-#, no-c-format
-msgid "Suppress the confirmation KNotes normally shows when deleting a note."
-msgstr ""
-
-#: conduits/knotes/knotesconduit.kcfg:17
-#, no-c-format
-msgid "list of the synced MemoDB records"
-msgstr ""
-
-#: conduits/knotes/knotesconduit.kcfg:21
-#, no-c-format
-msgid "list of the corresponding KNotes note IDs"
-msgstr ""
-
-#: conduits/knotes/setup_base.ui:45
-#, no-c-format
-msgid "Delete KNote when Pilot memo is deleted"
-msgstr ""
-
-#: conduits/knotes/setup_base.ui:51
-#, no-c-format
-msgid ""
-"<qt>Check this box if you wish to delete notes from KNotes automatically "
-"when the corresponding Pilot memo is deleted. Use this option with care, as "
-"the notes you want to keep in the handheld and in the desktop are not "
-"necessarily the same.</qt>"
-msgstr ""
-
-#: conduits/knotes/setup_base.ui:59
-#, no-c-format
-msgid "Suppress delete-confirmation in KNotes"
-msgstr ""
-
-#: conduits/knotes/setup_base.ui:62
-#, no-c-format
-msgid ""
-"<qt>Check this box if you wish to delete notes from KNotes, without "
-"confirmation, when the corresponding Pilot memo is deleted. Use this option "
-"only if you want to keep the same notes in the handheld and in the PC.</qt>"
-msgstr ""
-
-#: conduits/malconduit/mal-setup_dialog.ui:49
-#, no-c-format
-msgid "Sync"
-msgstr ""
-
-#: conduits/malconduit/mal-setup_dialog.ui:52
-#, no-c-format
-msgid "Select how often AvantGo should be synchronised"
-msgstr ""
-
-#: conduits/malconduit/mal-setup_dialog.ui:72
-#, no-c-format
-msgid "&Every sync"
-msgstr ""
-
-#: conduits/malconduit/mal-setup_dialog.ui:78
-#, no-c-format
-msgid ""
-"<qt>Select this option to synchronize with the MAL server on every HotSync. "
-"To perform a successful synchronization, you need to have access to the MAL "
-"server during the HotSync.</qt>"
-msgstr ""
-
-#: conduits/malconduit/mal-setup_dialog.ui:86
-#, no-c-format
-msgid "Once per &hour"
-msgstr ""
-
-#: conduits/malconduit/mal-setup_dialog.ui:92
-#, no-c-format
-msgid ""
-"<qt>Select this option to synchronize with the MAL server on every HotSync "
-"that is at least one hour after the previous MAL sync. To perform a "
-"successful synchronization, you need to have access to the MAL server during "
-"the HotSync.</qt>"
-msgstr ""
-
-#: conduits/malconduit/mal-setup_dialog.ui:100
-#, no-c-format
-msgid "Once a &day"
-msgstr ""
-
-#: conduits/malconduit/mal-setup_dialog.ui:103
-#, no-c-format
-msgid ""
-"<qt>Select this option to synchronize with the MAL server on every HotSync "
-"that is at least one day after the previous MAL sync. To perform a "
-"successful synchronization, you need to have access to the MAL server during "
-"the HotSync.</qt>"
-msgstr ""
-
-#: conduits/malconduit/mal-setup_dialog.ui:111
-#, no-c-format
-msgid "Once a &week"
-msgstr ""
-
-#: conduits/malconduit/mal-setup_dialog.ui:114
-#, no-c-format
-msgid ""
-"<qt>Select this option to synchronize with the MAL server on every HotSync "
-"that is at least one week after the previous MAL sync. To perform a "
-"successful synchronization, you need to have access to the MAL server during "
-"the HotSync.</qt>"
-msgstr ""
-
-#: conduits/malconduit/mal-setup_dialog.ui:122
-#, no-c-format
-msgid "Once a &month"
-msgstr ""
-
-#: conduits/malconduit/mal-setup_dialog.ui:125
-#, no-c-format
-msgid ""
-"<qt>Select this option to synchronize with the MAL server on every HotSync "
-"that is at least one month after the previous MAL sync. To perform a "
-"successful synchronization, you need to have access to the MAL server during "
-"the HotSync.</qt>"
-msgstr ""
-
-#: conduits/malconduit/mal-setup_dialog.ui:154
-#, no-c-format
-msgid "Proxy"
-msgstr ""
-
-#: conduits/malconduit/mal-setup_dialog.ui:168
-#, no-c-format
-msgid "Proxy Type"
-msgstr ""
-
-#: conduits/malconduit/mal-setup_dialog.ui:185
-#, no-c-format
-msgid "&No proxy"
-msgstr ""
-
-#: conduits/malconduit/mal-setup_dialog.ui:191
-#, no-c-format
-msgid ""
-"<qt>Select this option if you do not want KPilot to use a proxy server. Use "
-"this option if you connect to the internet directly.</qt>"
-msgstr ""
-
-#: conduits/malconduit/mal-setup_dialog.ui:199
-#, no-c-format
-msgid "&HTTP proxy"
-msgstr ""
-
-#: conduits/malconduit/mal-setup_dialog.ui:202
-#, no-c-format
-msgid "<qt>Select this option if you want KPilot to use a HTTP proxy.</qt>"
-msgstr ""
-
-#: conduits/malconduit/mal-setup_dialog.ui:210
-#, no-c-format
-msgid "&SOCKS proxy"
-msgstr ""
-
-#: conduits/malconduit/mal-setup_dialog.ui:213
-#, no-c-format
-msgid "<qt>Select this option if you want KPilot to use a SOCKS proxy.</qt>"
-msgstr ""
-
-#: conduits/malconduit/mal-setup_dialog.ui:226
-#, no-c-format
-msgid "Server Information"
-msgstr ""
-
-#: conduits/malconduit/mal-setup_dialog.ui:260
-#: conduits/malconduit/mal-setup_dialog.ui:462
-#, no-c-format
-msgid "Custom &port:"
-msgstr ""
-
-#: conduits/malconduit/mal-setup_dialog.ui:263
-#, no-c-format
-msgid "Check this box to use a non-standard proxy port."
-msgstr ""
-
-#: conduits/malconduit/mal-setup_dialog.ui:271
-#, no-c-format
-msgid "Ser&ver name:"
-msgstr ""
-
-#: conduits/malconduit/mal-setup_dialog.ui:277
-#: conduits/malconduit/mal-setup_dialog.ui:285
-#, no-c-format
-msgid ""
-"<qt>If you selected HTTP or SOCKS proxy, type the address of the proxy "
-"server to use here, in the form <i>foo.bar.com</i> (not <i>http://foo.bar."
-"com</i> or <i>http://foo.bar.com:8080</i>).</qt>"
-msgstr ""
-
-#: conduits/malconduit/mal-setup_dialog.ui:305
-#, no-c-format
-msgid ""
-"<qt>Enter the port you want KPilot to use when connecting to your proxy "
-"server here.</qt>"
-msgstr ""
-
-#: conduits/malconduit/mal-setup_dialog.ui:316
-#, no-c-format
-msgid ""
-"<qt>If your proxy requires authentication, enter your password here.</qt>"
-msgstr ""
-
-#: conduits/malconduit/mal-setup_dialog.ui:324
-#: conduits/malconduit/mal-setup_dialog.ui:349
-#, no-c-format
-msgid ""
-"<qt>If your proxy requires authentication, enter your username here.</qt>"
-msgstr ""
-
-#: conduits/malconduit/mal-setup_dialog.ui:332
-#: conduits/malconduit/mal-setup_dialog.ui:514
-#, no-c-format
-msgid "&Password:"
-msgstr "&Parola:"
-
-#: conduits/malconduit/mal-setup_dialog.ui:343
-#: conduits/malconduit/mal-setup_dialog.ui:525
-#, no-c-format
-msgid "&User name:"
-msgstr "K&ullanıcı adı:"
-
-#: conduits/malconduit/mal-setup_dialog.ui:371
-#: conduits/malconduit/mal-setup_dialog.ui:385
-#, no-c-format
-msgid ""
-"<qt>Enter a list of MAL servers that do not need the use of a proxy here, "
-"separated with commas, e.g: <br><i>localhost,127.0.0.1,.lan</i><qt>"
-msgstr ""
-
-#: conduits/malconduit/mal-setup_dialog.ui:379
-#, no-c-format
-msgid "N&o proxy for:"
-msgstr ""
-
-#: conduits/malconduit/mal-setup_dialog.ui:414
-#, no-c-format
-msgid "MAL Server"
-msgstr ""
-
-#: conduits/malconduit/mal-setup_dialog.ui:434
-#, no-c-format
-msgid "MAL Server Information"
-msgstr ""
-
-#: conduits/malconduit/mal-setup_dialog.ui:451
-#, no-c-format
-msgid "&MAL server name:"
-msgstr ""
-
-#: conduits/malconduit/mal-setup_dialog.ui:574
-#, no-c-format
-msgid ""
-"<qt>There is currently <b>no way to set server parameters on the desktop</"
-"b>; you need to use the <i>MobileLink</i> or <i>AGConnect</i> application on "
-"the handheld device. </qt>"
-msgstr ""
-
-#: conduits/memofileconduit/memofileconduit.kcfg:6
-#, no-c-format
-msgid "What directory do you want to sync your PDA's memos with?"
-msgstr ""
-
-#: conduits/memofileconduit/memofileconduit.kcfg:10
-#, no-c-format
-msgid "Do you want to sync your private records to the filesystem?"
-msgstr ""
-
-#: conduits/memofileconduit/setup_base.ui:33
-#, no-c-format
-msgid "Memofile Conduit Options"
-msgstr ""
-
-#: conduits/memofileconduit/setup_base.ui:96
-#, no-c-format
-msgid "Sync private records:"
-msgstr ""
-
-#: conduits/memofileconduit/setup_base.ui:104
-#, no-c-format
-msgid "Memos directory:"
-msgstr ""
-
-#: conduits/memofileconduit/setup_base.ui:115
-#, no-c-format
-msgid "Select the directory you want to store your PDA's memos in"
-msgstr ""
-
-#: conduits/notepadconduit/notepad-setup.ui:17
-#, no-c-format
-msgid "Path to the directory to which the pictures should be exported."
-msgstr ""
-
-#: conduits/notepadconduit/notepad-setup.ui:65
-#, no-c-format
-msgid "Output:"
-msgstr "Çıktı:"
-
-#: conduits/notepadconduit/notepadconduit.kcfg:9
-#, no-c-format
-msgid "The export directory for the notepad drawings"
-msgstr ""
-
-#: conduits/null/nullconduit.kcfg:9 conduits/recordconduit/settings.kcfg:13
-#, no-c-format
-msgid "The error message if the null conduit is supposed to fail"
-msgstr ""
-
-#: conduits/null/setup_base.ui:33 conduits/recordconduit/setup_base.ui:33
-#, no-c-format
-msgid "Null-Conduit Options"
-msgstr ""
-
-#: conduits/null/setup_base.ui:85 conduits/recordconduit/setup_base.ui:85
-#, no-c-format
-msgid "KPilot was here."
-msgstr "KPilot buradaydı."
-
-#: conduits/null/setup_base.ui:88 conduits/recordconduit/setup_base.ui:88
-#, no-c-format
-msgid "<qt>Enter the message to add to the Sync Log on your Pilot here.</qt>"
-msgstr ""
-
-#: conduits/null/setup_base.ui:96 conduits/recordconduit/setup_base.ui:96
-#, no-c-format
-msgid "&Log message:"
-msgstr "&Günlük iletisi:&Günlük iletisi:"
-
-#: conduits/popmail/popmail.kcfg:9
-#, no-c-format
-msgid "Selects the way in which mail is sent: none (0), kmail (1)."
-msgstr ""
-
-#: conduits/popmail/popmail.kcfg:13
-#, no-c-format
-msgid "The email address entered in the To: field of outgoing messages."
-msgstr ""
-
-#: conduits/popmail/popmail.kcfg:17
-#, no-c-format
-msgid "The pathname of your .signature file."
-msgstr ""
-
-#: conduits/popmail/popmail.kcfg:21
-#, no-c-format
-msgid "The name of KMail's outbox - use with caution."
-msgstr ""
-
-#: conduits/popmail/setup-dialog.ui:34
-#, no-c-format
-msgid "Send Mail"
-msgstr "İletiyi Gönder"
-
-#: conduits/popmail/setup-dialog.ui:62
-#, no-c-format
-msgid "Send method:"
-msgstr ""
-
-#: conduits/popmail/setup-dialog.ui:65 conduits/popmail/setup-dialog.ui:127
-#, no-c-format
-msgid ""
-"<qt>Select the method KPilot will use to send the mail from your Handheld to "
-"the recipients here. Depending on the method you choose, the other fields in "
-"the dialog may be enabled or disabled. Currently, the only <i>working</i> "
-"method is through KMail.</qt>"
-msgstr ""
-
-#: conduits/popmail/setup-dialog.ui:73
-#, no-c-format
-msgid "Email address:"
-msgstr "E-posta adresi:"
-
-#: conduits/popmail/setup-dialog.ui:76 conduits/popmail/setup-dialog.ui:87
-#, no-c-format
-msgid "<qt>Enter the email address you want to send messages as here.</qt>"
-msgstr ""
-
-#: conduits/popmail/setup-dialog.ui:84
-#, no-c-format
-msgid "$USER"
-msgstr ""
-
-#: conduits/popmail/setup-dialog.ui:95
-#, no-c-format
-msgid "Signature file:"
-msgstr ""
-
-#: conduits/popmail/setup-dialog.ui:98 conduits/popmail/setup-dialog.ui:106
-#, no-c-format
-msgid ""
-"<qt>If you want to add a signature file, enter the location of your "
-"signature file (usually, <i>.signature</i>, located in your home folder) "
-"here, or select it clicking the file picker button. The signature file "
-"contains the text that is added to the end of your outgoing mail messages.</"
-"qt>"
-msgstr ""
-
-#: conduits/popmail/setup-dialog.ui:112
-#, no-c-format
-msgid "Do Not Send Mail"
-msgstr "İletiyi gönderme"
-
-#: conduits/popmail/setup-dialog.ui:117
-#, no-c-format
-msgid "Use KMail"
-msgstr "KMail kullan"
-
-#: conduits/recordconduit/settings.kcfg:9
-#, no-c-format
-msgid "Whether the conduit should immediately bail out with an error"
-msgstr ""
-
-#: conduits/recordconduit/settings.kcfg:17
-#, no-c-format
-msgid "Databases that are skipped on sync"
-msgstr ""
-
-#: conduits/recordconduit/setup_base.ui:107
-#, no-c-format
-msgid "&Databases:"
-msgstr "&Veritabanları:"
-
-#: conduits/recordconduit/setup_base.ui:118
-#, no-c-format
-msgid ""
-"<qt>The Null-conduit can be attached to several databases, effectively "
-"preventing them from Syncing. Enter the database names here.</qt>"
-msgstr ""
-
-#: conduits/recordconduit/setup_base.ui:143
-#, no-c-format
-msgid "Simulate failure"
-msgstr ""
-
-#: conduits/recordconduit/setup_base.ui:146
-#, no-c-format
-msgid "Force the conduit to simulate a failure to perform the HotSync."
-msgstr ""
-
-#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:63
-#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:77
-#, no-c-format
-msgid ""
-"<qt>Enter here, or select by clicking the file picker button, the location "
-"and file name of the output file used to store the handheld's system "
-"information.</qt>"
-msgstr ""
-
-#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:71
-#, no-c-format
-msgid "Output &file:"
-msgstr "Çıktı &dosyası:"
-
-#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:85
-#, no-c-format
-msgid "Type of Output"
-msgstr ""
-
-#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:96
-#, no-c-format
-msgid "&HTML"
-msgstr ""
-
-#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:102
-#, no-c-format
-msgid ""
-"<qt>Select this option to output the system information data as a HTML "
-"document.</qt>"
-msgstr ""
-
-#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:110
-#, no-c-format
-msgid "Te&xt file"
-msgstr "&Metin dosyası"
-
-#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:113
-#, no-c-format
-msgid ""
-"<qt>Select this option to output the system information data as a text "
-"document.</qt>"
-msgstr ""
-
-#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:124
-#, no-c-format
-msgid ""
-"<qt>Enter here, or select by clicking on the file picker button, the "
-"location of the template to be used if you select the Custom template option."
-"</qt>"
-msgstr ""
-
-#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:132
-#, no-c-format
-msgid "&Custom template:"
-msgstr ""
-
-#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:135
-#, no-c-format
-msgid ""
-"<qt>Select this option to output the system information data as defined by a "
-"custom template. Enter the location of the template in the edit box, or "
-"select it clicking on the file picker button.</qt>"
-msgstr ""
-
-#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:147
-#, no-c-format
-msgid "Parts Included"
-msgstr ""
-
-#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:173
-#, no-c-format
-msgid "Output Type"
-msgstr "Çıktı Türü"
-
-#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:189
-#, no-c-format
-msgid ""
-"<qt>Check on this list the types of information about your system and "
-"handheld you want to display in the output file.</qt>"
-msgstr ""
-
-#: conduits/sysinfoconduit/sysinfoconduit.kcfg:23
-#, no-c-format
-msgid "Debug information (for KPilot developers)"
-msgstr "Hata ayıklama bilgisi (KPilot geliştiricileri için)"
-
-#: conduits/sysinfoconduit/sysinfoconduit.kcfg:27
-#, fuzzy, no-c-format
-msgid "Hardware information"
-msgstr "Veritabanı bilgisi"
-
-#: conduits/sysinfoconduit/sysinfoconduit.kcfg:31
-#, no-c-format
-msgid "List of databases on handheld (takes long!)"
-msgstr "Avuçiçi'ndeki veritabanlarının listesi (uzun zaman alır!)"
-
-#: conduits/sysinfoconduit/sysinfoconduit.kcfg:35
-#, fuzzy, no-c-format
-msgid "Memory information"
-msgstr "Kullanıcı Bilgisi"
-
-#: conduits/sysinfoconduit/sysinfoconduit.kcfg:39
-#, no-c-format
-msgid "Number of addresses, todos, events and memos"
-msgstr "Adreslerin, yapılacakların, olayların ve hafızaların sayısı"
-
-#: conduits/sysinfoconduit/sysinfoconduit.kcfg:43
-#, fuzzy, no-c-format
-msgid "PalmOS version"
-msgstr "PalmOS Sürümü"
-
-#: conduits/sysinfoconduit/sysinfoconduit.kcfg:47
-#, no-c-format
-msgid "Storage info (SD card, memory stick, ...)"
-msgstr "Saklama bilgisi (SD kartı, hafıza çubuğu, ...)"
-
-#: conduits/sysinfoconduit/sysinfoconduit.kcfg:51
-#, fuzzy, no-c-format
-msgid "Synchronization information"
-msgstr "KPilot Yapılandırma bilgilerini göster"
-
-#: conduits/sysinfoconduit/sysinfoconduit.kcfg:55
-#, no-c-format
-msgid "User information"
-msgstr "Kullanıcı Bilgisi"
-
-#: conduits/sysinfoconduit/sysinfoconduit.kcfg:59
-#, fuzzy, no-c-format
-msgid "Version of KPilot, pilot-link and TDE"
-msgstr "Kpilot, pilot-link ve TDE sürümü"
-
-#: conduits/timeconduit/time-setup_dialog.ui:63
-#, no-c-format
-msgid "Direction"
-msgstr ""
-
-#: conduits/timeconduit/time-setup_dialog.ui:80
-#, no-c-format
-msgid "Set the &handheld time from the time on the PC"
-msgstr ""
-
-#: conduits/timeconduit/time-setup_dialog.ui:86
-#, no-c-format
-msgid ""
-"<qt>Select this option to synchronize the handheld time with the PC time, by "
-"using the PC time on both.</qt>"
-msgstr ""
-
-#: conduits/timeconduit/time-setup_dialog.ui:97
-#, no-c-format
-msgid "Set the &PC time from the time on the handheld"
-msgstr ""
-
-#: conduits/timeconduit/time-setup_dialog.ui:100
-#, no-c-format
-msgid ""
-"<qt>Select this option to synchronize the handheld time with the PC time, by "
-"using the handheld time on both.</qt>"
-msgstr ""
-
-#: conduits/timeconduit/time-setup_dialog.ui:110
-#, no-c-format
-msgid ""
-"<qt>PalmOS Version 3.25 and 3.3 do not support setting the system time, so "
-"this conduit will be skipped for handhelds that run either of these "
-"operating systems.</qt>"
-msgstr ""
-
-#: conduits/vcalconduit/korganizerConduit.ui:31
-#, no-c-format
-msgid "Calendar-Conduit Options"
-msgstr ""
-
-#: conduits/vcalconduit/korganizerConduit.ui:105
-#, no-c-format
-msgid "&Standard calendar"
-msgstr ""
-
-#: conduits/vcalconduit/korganizerConduit.ui:108
-#, no-c-format
-msgid ""
-"<qt>Select this option to synchronize with the calendar specified by the TDE "
-"calendar settings.</qt>"
-msgstr ""
-
-#: conduits/vcalconduit/korganizerConduit.ui:119
-#, no-c-format
-msgid "Calendar &file:"
-msgstr ""
-
-#: conduits/vcalconduit/korganizerConduit.ui:122
-#, no-c-format
-msgid ""
-"<qt>Select this option to use a specific calendar file, instead of the "
-"standard TDE calendar. This file must be in the in the vCalendar or "
-"iCalendar format. Enter the location of this file in the edit box or select "
-"it clicking the file picker button.</qt>"
-msgstr ""
-
-#: conduits/vcalconduit/korganizerConduit.ui:141
-#, no-c-format
-msgid ""
-"<qt>Enter here the location and filename of the calendar file or select it "
-"clicking the file picker button. This file must be in the iCalendar or "
-"vCalendar format.</qt>"
-msgstr ""
-
-#: conduits/vcalconduit/korganizerConduit.ui:151
-#, no-c-format
-msgid "Store &archived records in the TDE calendar"
-msgstr ""
-
-#: conduits/vcalconduit/korganizerConduit.ui:154
-#, no-c-format
-msgid ""
-"When this box is checked, archived records will still\n"
-"be saved in the calendar on the PC."
-msgstr ""
-
-#: conduits/vcalconduit/korganizerConduit.ui:233
-#, no-c-format
-msgid ""
-"<qt>Select in this list how conflicting entries (entries which were edited "
-"both on your handheld and on the PC) are resolved. Possibly values are \"Use "
-"KPilot's Global Setting\" to use the settings defined in KPilot HotSync "
-"configuration, \"Ask User\" to let you decide case by case, \"Do Nothing\" "
-"to allow the entries to be different, \"PC overrides\", \"Handheld overrides"
-"\", \"Use values from last sync\" and \"Use both entries\" to create a new "
-"entry on both the PC and handheld. Note that this does <i>not</i> handle "
-"double-scheduling conflicts.</qt>"
-msgstr ""
-
-#: kpilot/dbFlagsEditor_base.ui:32
-#, no-c-format
-msgid "Database &name:"
-msgstr "&Veritabanı adı:"
-
-#: kpilot/dbFlagsEditor_base.ui:51
-#, no-c-format
-msgid "&Creator:"
-msgstr "&Oluşturan:"
-
-#: kpilot/dbFlagsEditor_base.ui:70
-#, no-c-format
-msgid "&Type:"
-msgstr "&Tür:"
-
-#: kpilot/dbFlagsEditor_base.ui:97
-#, no-c-format
-msgid "Database Flags"
-msgstr "Veri Tabanı Bayrakları"
-
-#: kpilot/dbFlagsEditor_base.ui:108
-#, no-c-format
-msgid "&Ressource database"
-msgstr "&Kaynak veritabanı"
-
-#: kpilot/dbFlagsEditor_base.ui:116
-#, no-c-format
-msgid "Rea&d-only"
-msgstr "&Salt-oku"
-
-#: kpilot/dbFlagsEditor_base.ui:124
-#, no-c-format
-msgid "Database is &backed up"
-msgstr "Veritabanı &yedeklendi"
-
-#: kpilot/dbFlagsEditor_base.ui:132
-#, no-c-format
-msgid "Copy &protected"
-msgstr "&Kopyalama korumalı"
-
-#: kpilot/dbFlagsEditor_base.ui:159
-#, no-c-format
-msgid "Misc Flags"
-msgstr ""
-
-#: kpilot/dbFlagsEditor_base.ui:187
-#, no-c-format
-msgid "Reset after &installation"
-msgstr "&Kurulumdan sonra yeniden başlat"
-
-#: kpilot/dbFlagsEditor_base.ui:195
-#, no-c-format
-msgid "E&xclude from sync"
-msgstr ""
-
-#: kpilot/dbFlagsEditor_base.ui:205
-#, no-c-format
-msgid "Time Stamps"
-msgstr "Zaman Etiketleri"
-
-#: kpilot/dbFlagsEditor_base.ui:224
-#, no-c-format
-msgid "Cr&eation time:"
-msgstr "Y&aratılma zamanı:"
-
-#: kpilot/dbFlagsEditor_base.ui:235
-#, no-c-format
-msgid "&Modification time:"
-msgstr "&Değiştirme zamanı:"
-
-#: kpilot/dbFlagsEditor_base.ui:246
-#, no-c-format
-msgid "Back&up time:"
-msgstr "&Yedekleme zamanı:"
-
-#: kpilot/dbRecordEditor_base.ui:89
-#, no-c-format
-msgid "&Deleted"
-msgstr "&Silindi"
-
-#: kpilot/dbRecordEditor_base.ui:97
-#, no-c-format
-msgid "Busy"
-msgstr "Meşgul"
-
-#: kpilot/dbSelection_base.ui:23
-#, no-c-format
-msgid "Database"
-msgstr "Veritabanı"
-
-#: kpilot/dbSelection_base.ui:60
-#, no-c-format
-msgid "&Add"
-msgstr "&Ekle"
-
-#: kpilot/kpilot.kcfg:10 kpilot/kpilot.kcfg:15 kpilot/kpilot.kcfg:20
-#: kpilot/kpilot.kcfg:26 kpilot/kpilot.kcfg:31 kpilot/kpilot.kcfg:36
-#: kpilot/kpilot.kcfg:41 kpilot/kpilot.kcfg:55 kpilot/kpilot.kcfg:60
-#: kpilot/kpilot.kcfg:65 kpilot/kpilot.kcfg:70 kpilot/kpilot.kcfg:75
-#: kpilot/kpilot.kcfg:82 kpilot/kpilot.kcfg:87 kpilot/kpilot.kcfg:92
-#: kpilot/kpilot.kcfg:100 kpilot/kpilot.kcfg:105 kpilot/kpilot.kcfg:114
-#: kpilot/kpilot.kcfg:127 kpilot/kpilot.kcfg:132 kpilot/kpilot.kcfg:150
-#: kpilot/kpilot.kcfg:158 kpilot/kpilot.kcfg:162 kpilot/kpilot.kcfg:166
-#: kpilot/kpilot.kcfg:174 kpilot/kpilot.kcfg:179
-#, no-c-format
-msgid ""
-"\n"
-"        "
-msgstr ""
-
-#: kpilot/kpilot.kcfg:110
-#, no-c-format
-msgid "Which databases not to backup."
-msgstr ""
-
-#: kpilot/kpilot.kcfg:137
-#, no-c-format
-msgid "Prevent HotSync when screen locked"
-msgstr ""
-
-#: kpilot/kpilot.kcfg:138
-#, no-c-format
-msgid ""
-"Turning this option on prevents syncing\n"
-"\twhen the screen is locked. This is a security measure\n"
-"\tto prevent people from stealing your data through physical\n"
-"\taccess to a Pilot device link to your machine.\n"
-"\tIt doesn't work with screensavers other than TDE, though,\n"
-"\tso you will need to turn it off for other environments."
-msgstr ""
-
-#: kpilot/kpilotConfigDialog_backup.ui:18
-#: kpilot/kpilotConfigDialog_device.ui:18
-#: kpilot/kpilotConfigDialog_startup.ui:19 kpilot/kpilotConfigDialog_sync.ui:18
-#: kpilot/kpilotConfigDialog_viewers.ui:19
-#, no-c-format
-msgid "KPilot Options"
-msgstr ""
-
-#: kpilot/kpilotConfigDialog_backup.ui:29
-#, no-c-format
-msgid "Backup Frequency"
-msgstr "Yedekleme Sıklığı"
-
-#: kpilot/kpilotConfigDialog_backup.ui:54
-#, no-c-format
-msgid "Do &backup:"
-msgstr "Y&edekle:"
-
-#: kpilot/kpilotConfigDialog_backup.ui:63
-#, no-c-format
-msgid "On every HotSync"
-msgstr ""
-
-#: kpilot/kpilotConfigDialog_backup.ui:68
-#, no-c-format
-msgid "On request only"
-msgstr ""
-
-#: kpilot/kpilotConfigDialog_backup.ui:90
-#, no-c-format
-msgid "Databases"
-msgstr "Veritabanları"
-
-#: kpilot/kpilotConfigDialog_backup.ui:107
-#, no-c-format
-msgid "&No backup:"
-msgstr "Y&edekleme yok:"
-
-#: kpilot/kpilotConfigDialog_backup.ui:113
-#: kpilot/kpilotConfigDialog_backup.ui:141
-#, no-c-format
-msgid ""
-"<qt><p>Enter the databases types you wish to exclude from the backup "
-"operation here. Use this setting if backing up some databases crashes the "
-"handheld, or if you do not want a backup of some databases (like AvantGo "
-"pages).</p><p>Entries with square brackets [] are <i>creator codes</i> like "
-"<tt>[lnch]</tt> and can exclude a whole range of databases. Entries without "
-"the brackets list database names, and may include shell-style wildcards, "
-"like <tt>*_a68k</tt>.</p></qt>"
-msgstr ""
-
-#: kpilot/kpilotConfigDialog_backup.ui:127
-#, no-c-format
-msgid "Not &restored:"
-msgstr "&Geri Alınmadı:"
-
-#: kpilot/kpilotConfigDialog_backup.ui:133
-#: kpilot/kpilotConfigDialog_backup.ui:149
-#, no-c-format
-msgid ""
-"<qt><p>Enter the databases types you wish to exclude from the restore "
-"operation here (like AvantGo databases). They will be skipped even if they "
-"exist in the set of backup databases on the handheld. If you still want to "
-"install an ignored database to the handheld, you can always manually install "
-"it to the handheld.</p><p>Entries with square brackets [] are <i>creator "
-"codes</i> like <tt>[lnch]</tt> and can exclude a whole range of databases. "
-"Entries without the brackets list database names, and may include shell-"
-"style wildcards, like <tt>*_a68k</tt>.</p></qt>"
-msgstr ""
-
-#: kpilot/kpilotConfigDialog_backup.ui:157
-#: kpilot/kpilotConfigDialog_backup.ui:168
-#, no-c-format
-msgid "..."
-msgstr "..."
-
-#: kpilot/kpilotConfigDialog_backup.ui:160
-#, no-c-format
-msgid ""
-"<qt>Click here to open the database selection dialog. This dialog allows you "
-"to check the databases you want to exclude from the backup from a list.</qt>"
-msgstr ""
-
-#: kpilot/kpilotConfigDialog_backup.ui:171
-#, no-c-format
-msgid ""
-"<qt>Click here to open the database selection dialog. This dialog allows you "
-"to select the databases you want to exclude from the restore operation from "
-"a list.</qt>"
-msgstr ""
-
-#: kpilot/kpilotConfigDialog_backup.ui:181
-#, no-c-format
-msgid "Run conduits durin&g a backup sync"
-msgstr ""
-
-#: kpilot/kpilotConfigDialog_backup.ui:184
-#, no-c-format
-msgid ""
-"<qt>Check this box to run the selected conduits before every backup. This "
-"makes sure the backup is up to date with the last changes from your PC.</qt>"
-msgstr ""
-
-#: kpilot/kpilotConfigDialog_device.ui:29
-#, no-c-format
-msgid "Pilot &device:"
-msgstr "&Pilot aygıtı:"
-
-#: kpilot/kpilotConfigDialog_device.ui:35
-#: kpilot/kpilotConfigDialog_device.ui:43
-#, no-c-format
-msgid ""
-"<qt>Enter the device the Pilot is attached to (for instance a serial or USB "
-"port) here. You can also use <i>/dev/pilot</i>, and make that a symlink to "
-"the correct device. You need write permission to successfully synchronize "
-"with the handheld.</qt>"
-msgstr ""
-
-#: kpilot/kpilotConfigDialog_device.ui:51
-#, no-c-format
-msgid "&Speed:"
-msgstr "&Hız:"
-
-#: kpilot/kpilotConfigDialog_device.ui:57
-#: kpilot/kpilotConfigDialog_device.ui:115
-#, no-c-format
-msgid ""
-"<qt>Select the speed of the serial connection to your handheld here. This "
-"has no meaning for USB devices. For an older model, choose 9600. Newer "
-"models may be able to handle speeds up to the maximum listed, 115200. You "
-"can experiment with the connection speed: the manual suggests starting at a "
-"speed of 19200 and trying faster speeds to see if they work.</qt>"
-msgstr ""
-
-#: kpilot/kpilotConfigDialog_device.ui:65
-#: kpilot/kpilotConfigDialog_device.ui:143
-#, no-c-format
-msgid ""
-"<qt>Enter your name here, as it appears in the Pilot's &quot;Owner&quot; "
-"setting.</qt>"
-msgstr ""
-
-#: kpilot/kpilotConfigDialog_device.ui:88
-#, no-c-format
-msgid "9600"
-msgstr "9600"
-
-#: kpilot/kpilotConfigDialog_device.ui:93
-#, no-c-format
-msgid "19200"
-msgstr "19200"
-
-#: kpilot/kpilotConfigDialog_device.ui:98
-#, no-c-format
-msgid "38400"
-msgstr "38400"
-
-#: kpilot/kpilotConfigDialog_device.ui:103
-#, no-c-format
-msgid "57600"
-msgstr "57600"
-
-#: kpilot/kpilotConfigDialog_device.ui:108
-#, no-c-format
-msgid "115200"
-msgstr "115200"
-
-#: kpilot/kpilotConfigDialog_device.ui:123
-#, no-c-format
-msgid "En&coding:"
-msgstr ""
-
-#: kpilot/kpilotConfigDialog_device.ui:129
-#: kpilot/kpilotConfigDialog_device.ui:154
-#, no-c-format
-msgid ""
-"<qt>PalmOS devices are available in many different languages. If your device "
-"uses a different encoding than ISO-latin1 (ISO8859-1), select the correct "
-"encoding here, in order to display special characters correctly.</qt>"
-msgstr ""
-
-#: kpilot/kpilotConfigDialog_device.ui:137
-#, no-c-format
-msgid "Pilot &user:"
-msgstr "Pilot &kullanıcısı:"
-
-#: kpilot/kpilotConfigDialog_device.ui:162
-#, no-c-format
-msgid "&Workarounds:"
-msgstr ""
-
-#: kpilot/kpilotConfigDialog_device.ui:171
-#, no-c-format
-msgid "None"
-msgstr "Hiçbiri"
-
-#: kpilot/kpilotConfigDialog_device.ui:176
-#, no-c-format
-msgid "Zire 31, 72, Tungsten T5"
-msgstr ""
-
-#: kpilot/kpilotConfigDialog_device.ui:183
-#, no-c-format
-msgid ""
-"<qt>Workarounds enable special handling for specific devices. Most devices "
-"do not need special handling. However, the Zire&tm; 31, Zire 72 and Tungsten "
-"T5 <i>do</i> have special needs, so if you are connecting such a device, "
-"please select the workaround for them.</qt>"
-msgstr ""
-
-#: kpilot/kpilotConfigDialog_startup.ui:33
-#, no-c-format
-msgid "Exit Options"
-msgstr "Çıkış Seçenekleri"
-
-#: kpilot/kpilotConfigDialog_startup.ui:44
-#, no-c-format
-msgid "S&top KPilot's system tray application on exit"
-msgstr ""
-
-#: kpilot/kpilotConfigDialog_startup.ui:47
-#, no-c-format
-msgid ""
-"<qt>Check this box to stop the KPilot daemon when you quit KPilot (only if "
-"KPilot started the daemon itself).</qt>"
-msgstr ""
-
-#: kpilot/kpilotConfigDialog_startup.ui:55
-#, no-c-format
-msgid "Quit &after HotSync"
-msgstr ""
-
-#: kpilot/kpilotConfigDialog_startup.ui:58
-#, no-c-format
-msgid ""
-"<qt>Check this box to stop both KPilot and the KPilot daemon after the "
-"HotSync finishes. This may be useful for systems where KPilot is started by "
-"the USB daemon.</qt>"
-msgstr ""
-
-#: kpilot/kpilotConfigDialog_startup.ui:68
-#, no-c-format
-msgid "Startup Options"
-msgstr "Başlangıç Seçenekleri"
-
-#: kpilot/kpilotConfigDialog_startup.ui:79
-#: kpilot/kpilotConfigWizard_user.ui:133
-#, no-c-format
-msgid "&Start KPilot at login"
-msgstr "&Girişte KPilot uygulamasını çalıştır"
-
-#: kpilot/kpilotConfigDialog_startup.ui:82
-#, no-c-format
-msgid ""
-"<qt>Check this box to start up the KPilot daemon every time you log in to "
-"TDE.</qt>"
-msgstr ""
-
-#: kpilot/kpilotConfigDialog_startup.ui:90
-#, no-c-format
-msgid "S&how KPilot in system tray"
-msgstr "KPilot Uygulamasını Sistem çekmecesinde &göster"
-
-#: kpilot/kpilotConfigDialog_startup.ui:93
-#, no-c-format
-msgid ""
-"<qt>Check this box to place a Kpilot icon in the system tray, which shows "
-"the daemon's status, and allows you to select the next sync type and to "
-"configure KPilot.</qt>"
-msgstr ""
-
-#: kpilot/kpilotConfigDialog_sync.ui:32
-#, no-c-format
-msgid "Do full sync when chan&ging PCs"
-msgstr ""
-
-#: kpilot/kpilotConfigDialog_sync.ui:38
-#, no-c-format
-msgid ""
-"<qt>Check this box to perform a full sync when your last sync was performed "
-"with another PC or system, to guarantee the completeness of your data.</qt>"
-msgstr ""
-
-#: kpilot/kpilotConfigDialog_sync.ui:44
-#, no-c-format
-msgid "HotSync (sync all changes)"
-msgstr ""
-
-#: kpilot/kpilotConfigDialog_sync.ui:49
-#, no-c-format
-msgid "FullSync (sync also unchanged records)"
-msgstr ""
-
-#: kpilot/kpilotConfigDialog_sync.ui:66
-#, no-c-format
-msgid ""
-"<qt>Select in this list the synchronization type that KPilot will use as "
-"default. Possible values are:<br>\"HotSync\", to run all selected conduits, "
-"and sync the databases with a modified flag set, updating the modified "
-"records only;<br>\"FullSync\" to run all selected conduits, and sync all "
-"databases, reading all records, and performing a full backup;<br>\"Copy PC "
-"to handheld\" to run all conduits and sync all databases, but instead of "
-"merging the information from both sources, copy the PC data to the handheld;"
-"<br>\"Copy handheld to PC\" to run all conduits and sync all databases, but "
-"instead of merging the information from both sources, copy the handheld data "
-"to the PC.</qt>"
-msgstr ""
-
-#: kpilot/kpilotConfigDialog_sync.ui:74
-#, no-c-format
-msgid "&Default sync:"
-msgstr ""
-
-#: kpilot/kpilotConfigDialog_sync.ui:132
-#, no-c-format
-msgid ""
-"<qt>Select in this list how conflicting entries (entries which were edited "
-"both on your handheld and on the PC) are resolved. Possibly values are  "
-"\"Ask User\" to let you decide case by case, \"Do Nothing\" to allow the "
-"entries to be different, \"PC overrides\", \"Handheld overrides\", \"Use "
-"values from last sync\" and \"Use both entries\" to create a new entry on "
-"both the PC and handheld. Note that the conflict resolution option selected "
-"here can be overridden by conduits that have their own conflict resolution "
-"configuration.</qt>"
-msgstr ""
-
-#: kpilot/kpilotConfigDialog_sync.ui:159
-#, no-c-format
-msgid "Do not sync when screensaver is active"
-msgstr ""
-
-#: kpilot/kpilotConfigDialog_sync.ui:165
-#, no-c-format
-msgid ""
-"<qt>Check this box to prevent KPilot from syncing your handheld while the "
-"screensaver is active: this is a security measure to prevent others from "
-"syncing <i>their</i> handhelds with your data.  This option must be disabled "
-"when you use a different desktop, since KPilot is not aware of screensavers "
-"other than TDE's.</qt>"
-msgstr ""
-
-#: kpilot/kpilotConfigDialog_viewers.ui:47
-#, no-c-format
-msgid "Make internal viewers &editable"
-msgstr ""
-
-#: kpilot/kpilotConfigDialog_viewers.ui:53
-#, no-c-format
-msgid ""
-"<qt>The internal viewers can be read only or editable. The editable mode "
-"allows you to add new records, delete or edit the existing records and sync "
-"your modifications back to the handheld. Check this box to set the internal "
-"viewers to editable mode, uncheck to set them to read only mode.</qt>"
-msgstr ""
-
-#: kpilot/kpilotConfigDialog_viewers.ui:61
-#, no-c-format
-msgid "&Show private records"
-msgstr "&Özel kayıtları göster"
-
-#: kpilot/kpilotConfigDialog_viewers.ui:64
-#, no-c-format
-msgid ""
-"<qt>Check this box to display in the internal viewers records that are "
-"marked &quot;Private&quot; in the Pilot.</qt>"
-msgstr ""
-
-#: kpilot/kpilotConfigDialog_viewers.ui:85
-#, no-c-format
-msgid "Show as \"&Last, first\""
-msgstr ""
-
-#: kpilot/kpilotConfigDialog_viewers.ui:88
-#, no-c-format
-msgid ""
-"<qt>Select this option to display addresses in the internal address viewer "
-"sorted by last name, first name.</qt>"
-msgstr ""
-
-#: kpilot/kpilotConfigDialog_viewers.ui:96
-#, no-c-format
-msgid "Show as \"&Company, last\""
-msgstr ""
-
-#: kpilot/kpilotConfigDialog_viewers.ui:99
-#, no-c-format
-msgid ""
-"<qt>Select this option to display addresses in the internal address viewer "
-"sorted by company name, last name.</qt>"
-msgstr ""
-
-#: kpilot/kpilotConfigDialog_viewers.ui:121
-#, no-c-format
-msgid "&Use key field"
-msgstr ""
-
-#: kpilot/kpilotConfigDialog_viewers.ui:124
-#, no-c-format
-msgid ""
-"<qt>Check this box to combine all entries with the same last name in the "
-"internal address viewer.</qt>"
-msgstr ""
-
-#: kpilot/kpilotConfigWizard_app.ui:24
-#, no-c-format
-msgid ""
-"Finally, you can configure KPilot specifically for some PIM applications, "
-"like Kontact (TDE's integrated PIM application) or Evolution (GNOME's "
-"integrated PIM application).\n"
-"\n"
-"Press \"Finish\" to setup KPilot according to the settings in this "
-"configuration Wizard."
-msgstr ""
-
-#: kpilot/kpilotConfigWizard_app.ui:37
-#, no-c-format
-msgid "Set Default Values for Syncing With"
-msgstr ""
-
-#: kpilot/kpilotConfigWizard_app.ui:48
-#, no-c-format
-msgid "&TDE-PIM suite (Kontact)"
-msgstr "&TDE-PIM takımı (Kontact)"
-
-#: kpilot/kpilotConfigWizard_app.ui:59
-#, no-c-format
-msgid "&GNOME-PIM (Evolution)"
-msgstr "&GNOME-PIM (Evolution)"
-
-#: kpilot/kpilotConfigWizard_app.ui:67
-#, no-c-format
-msgid "No sync, just backup"
-msgstr ""
-
-#: kpilot/kpilotConfigWizard_user.ui:24
-#, no-c-format
-msgid "This wizard will help you configure KPilot."
-msgstr ""
-
-#: kpilot/kpilotConfigWizard_user.ui:35
-#, no-c-format
-msgid ""
-"As a first step, we need to determine the user name and how the handheld is "
-"connected to the computer."
-msgstr ""
-
-#: kpilot/kpilotConfigWizard_user.ui:46
-#, no-c-format
-msgid "Handheld && User Name"
-msgstr ""
-
-#: kpilot/kpilotConfigWizard_user.ui:49
-#, no-c-format
-msgid ""
-"<p>You can either let KPilot detect these values automatically (for this you "
-"need your handheld ready and connected to the PC)  or enter them manually.</"
-"p>\n"
-"<p>Please enter the username exactly as set on the handheld. </p>\n"
-"<p>If setting the device type manually (i.e., if automatic detection did not "
-"work for you), please look below for tips on choosing the right device "
-"name.  {0...n} means a number from 0 up to a very large number, though "
-"usually just 255.\n"
-"<p>\n"
-"Serial Port: an old method of connection, used primarily by the original "
-"line of Palm Pilots, and various Palm-based cellphones.  Device name will "
-"look like /dev/ttyS{0...n} (Linux) or /dev/cuaa{0...n} (FreeBSD).</p>\n"
-"<p>\n"
-"USB Port: A newer style of connection, used by most newer Palms, "
-"Handsprings, and Sony Clies.  Device name will look like /dev/ttyUSB{0...n} "
-"or /dev/usb/tts/{0...n} (Linux) or /dev/ucom{0...n} (FreeBSD).  On Linux, "
-"definitely check both 0 and 1: newer devices tend to use 1; older devices "
-"tend to use 0.</p>\n"
-"<p>\n"
-"Infrared: (pronounced infra-red) is a relatively slow connection type used "
-"solely as a last resort.  Device name will be /dev/ircomm0 or /dev/ttyS{0..."
-"n} (Linux), or /dev/sio{0...n} (FreeBSD).</p>\n"
-"<p>\n"
-"Bluetooth: A new connection method, this is used almost exclusively on new, "
-"high-end devices, like the Tungsten T3 or the Zire 72.  Device name will be /"
-"dev/usb/ttub/{0...n} or /dev/ttyUB{0...n} (Linux), or /dev/ttyp{0...n} "
-"(FreeBSD).</p>\n"
-"<p>\n"
-"Network: This has not been tested by any of the KPilot developers themselves "
-"(hardware donations always accepted!), but it has been reported that setting "
-"the device to \"net:any\" will work for network-enabled devices.  However, "
-"this has also been known to lock KPilot up when doing anything other than "
-"just syncing. Use it with caution.\n"
-"</p>"
-msgstr ""
-
-#: kpilot/kpilotConfigWizard_user.ui:73
-#, no-c-format
-msgid "&Device:"
-msgstr "&Aygıt:"
-
-#: kpilot/kpilotConfigWizard_user.ui:79 kpilot/kpilotConfigWizard_user.ui:101
-#, no-c-format
-msgid ""
-"<qt>Enter the device the Pilot is attached to (for instance a serial or USB "
-"port) here. You can also use <i>/dev/pilot</i>, and make that a symlink to "
-"the correct device. Use the button below to automatically detect the device. "
-"You need write permission to successfully synchronize with the handheld.</qt>"
-msgstr ""
-
-#: kpilot/kpilotConfigWizard_user.ui:87
-#, no-c-format
-msgid "&Automatically Detect Handheld && User Name"
-msgstr ""
-
-#: kpilot/kpilotConfigWizard_user.ui:90
-#, no-c-format
-msgid ""
-"<qt>Click this button to open the detection dialog. The wizard will try to "
-"automatically find and display the correct device and username for your "
-"handheld. If the wizard cannot retrieve this information, check if you have "
-"write permission for the device.</qt>"
-msgstr ""
-
-#: kpilot/kpilotConfigWizard_user.ui:98
-#, no-c-format
-msgid "/dev/pilot"
-msgstr ""
-
-#: kpilot/kpilotConfigWizard_user.ui:109 kpilot/kpilotConfigWizard_user.ui:123
-#, no-c-format
-msgid ""
-"<qt>Enter your username here, as it appears in the Pilot's &quot;Owner&quot; "
-"setting, or use the button below to automatically detect it.</qt>"
-msgstr ""
-
-#: kpilot/kpilotConfigWizard_user.ui:117
-#, no-c-format
-msgid "User na&me:"
-msgstr "K&ullanıcı adı:"
-
-#: kpilot/kpilotConfigWizard_user.ui:139
-#, no-c-format
-msgid ""
-"<qt>Check this box to make the kpilot daemon load when you first log in "
-"until you log out.  That means (in theory), that you should not have to do "
-"anything other than connect your handheld and push \"sync\", and kpilot will "
-"appear and magically do your bidding. </qt>"
-msgstr ""
-
-#: kpilot/todoEditor_base.ui:32
-#, no-c-format
-msgid "&Description:"
-msgstr "&Açıklama:"
-
-#: kpilot/todoEditor_base.ui:54
-#, no-c-format
-msgid "&Note:"
-msgstr "&Not:"
-
-#: kpilot/todoEditor_base.ui:71
-#, no-c-format
-msgid "Ca&tegory:"
-msgstr "&Kategori:"
-
-#: kpilot/todoEditor_base.ui:90
-#, no-c-format
-msgid "&Priority:"
-msgstr "Ö&ncelik:"
-
-#: kpilot/todoEditor_base.ui:104
-#, no-c-format
-msgid "2"
-msgstr "2"
-
-#: kpilot/todoEditor_base.ui:109
-#, no-c-format
-msgid "3"
-msgstr "3"
-
-#: kpilot/todoEditor_base.ui:114
-#, no-c-format
-msgid "4"
-msgstr "4"
-
-#: kpilot/todoEditor_base.ui:119
-#, no-c-format
-msgid "5"
-msgstr "5"
-
-#: kpilot/todoEditor_base.ui:147
-#, no-c-format
-msgid "&Completed"
-msgstr "&Tamamlandı"
-
-#: kpilot/todoEditor_base.ui:155
-#, no-c-format
-msgid "Has &end date:"
-msgstr ""
-
-#, fuzzy
-#~ msgid "&About"
-#~ msgstr "Hakkında"
-
-#, fuzzy
-#~ msgid "About"
-#~ msgstr "Hakkında"
-
-#, fuzzy
-#~ msgid "&Delete"
-#~ msgstr "&Silindi"
-
-#, fuzzy
-#~ msgid "Configuration"
-#~ msgstr "Yapılandırma Sihirbazı"
-
-#, fuzzy
-#~ msgid "&File"
-#~ msgstr "CSV Dosya adı:"
-
-#, fuzzy
-#~ msgid "&Settings"
-#~ msgstr "Yerel dil ayarları"
-
-#~ msgid "Cannot open database"
-#~ msgstr "Veritabanı açılamadı"
-
-#~ msgid "Pilot database error"
-#~ msgstr "Pilot veritabanı hatası"
-
-#~ msgid "Cannot create database %1 on the handheld"
-#~ msgstr "Avuçiçinde %1 veritabanı oluşturulamadı"
-
-#~ msgid "Device link ready."
-#~ msgstr "Aygıt bağlantısı hazır."
-
-#~ msgid "(empty)"
-#~ msgstr "(boş)"
-
-#, fuzzy
-#~ msgid "Creating local backup of databases in %1."
-#~ msgstr "Veritabanı açılamadı"
-
-#, fuzzy
-#~ msgid "Creating local backup .."
-#~ msgstr "Palm Pilot yedekleniyor..."
-
-#, fuzzy
-#~ msgid "FastSync"
-#~ msgstr "&Hızlı-Senkronizasyon"
-
-#~ msgid "Exiting on cancel. All data not restored."
-#~ msgstr "İşlem iptal edildi. Verilerin tamamı yedeklenmedi."
-
-#, fuzzy
-#~ msgid "Python"
-#~ msgstr "Telefon"
-
-#, fuzzy
-#~ msgid "Python Conduit for KPilot"
-#~ msgstr "KPilot için Posta Kanalı"
-
-#, fuzzy
-#~ msgid "Configures the Python Conduit for KPilot"
-#~ msgstr "KPilot için Boş Kanalı Yapılandırır"
-
-#, fuzzy
-#~ msgid "Cannot open file `%1' for restore."
-#~ msgstr "Pilot portu \"%1\" açılamadı. "
-
-#~ msgid "&FastSync"
-#~ msgstr "&Hızlı-Senkronizasyon"
-
-#~ msgid "List available conduits"
-#~ msgstr "Kullanılabilir kanalları listele"
-
-#~ msgid "Reset"
-#~ msgstr "Sıfırla"
-
-#, fuzzy
-#~ msgid "Python-Conduit Options"
-#~ msgstr "KPilot için Posta Kanalı"
-
-#, fuzzy
-#~ msgid "ConfigWizard_base3"
-#~ msgstr "Bağlantı Ayarlama İletişim Kutusu"
-
-#, fuzzy
-#~ msgid "Export..."
-#~ msgstr "Hatırlatmaları Aktar..."
-
-#, fuzzy
-#~ msgid "local"
-#~ msgstr "vcal"
-
-#~ msgid "&General"
-#~ msgstr "&Genel"
-
-#, fuzzy
-#~ msgid "C&onflicts"
-#~ msgstr "Çakışan Girdiler"
-
-#, fuzzy
-#~ msgid "Unknown sync mode"
-#~ msgstr "[bilinmeyen]"
-
-#, fuzzy
-#~ msgid "Conduit flags: "
-#~ msgstr "Kanal"
-
-#~ msgid "Setting the clock on the PC from the time on the handheld"
-#~ msgstr "Bilgisayarın saati avuçiçinin saatinden ayarlanıyor"
-
-#, fuzzy
-#~ msgid "Pilot device %1 does not exist. Assuming the device uses DevFS."
-#~ msgstr "Pilot aygıtı %1 yok. Aygıtın DevFS kullandığı varsayılıyor."
-
-#~ msgid "Could not start KMail. The error message was: %1."
-#~ msgstr "KMail başlatılamadı. Alınan hata: %1"
-
-#~ msgid "Kroupware syncing is enabled."
-#~ msgstr "Kroupware senkronizasyonu etkinleştirildi."
-
-#~ msgid "ToDo"
-#~ msgstr "Yapılacaklar"
-
-#, fuzzy
-#~ msgid "FullSync"
-#~ msgstr "Senkronizasyon Yok"
-
-#, fuzzy
-#~ msgid "Serial port"
-#~ msgstr "Genel"
-
-#, fuzzy
-#~ msgid "USB port"
-#~ msgstr "CSV Aktar"
-
-#, fuzzy
-#~ msgid "General &TDE"
-#~ msgstr "Genel"
-
-#, fuzzy
-#~ msgid "We really do not know what this does."
-#~ msgstr "Bunun ne yaptığını gerçekten bilmiyoruz"
-
-#~ msgid ""
-#~ "<qt>Sets the speed of the connection to your Pilot. This is only "
-#~ "important for serial devices.</qt>"
-#~ msgstr ""
-#~ "<qt>Pilot'unuza bağlantı hızınızı ayarlar. Bu işlem sadece seri aygıtlar "
-#~ "için önemlidir. </qt>"
-
-#, fuzzy
-#~ msgid "Hot Sync"
-#~ msgstr "Senkronizasyon"
-
-#, fuzzy
-#~ msgid "Fast Sync"
-#~ msgstr "&Hızlı-Senkronizasyon"
-
-#~ msgid ""
-#~ "*.so|JPilot Plugins\n"
-#~ "*.*|All Files"
-#~ msgstr ""
-#~ "*.so|JPilot Eklentileri\n"
-#~ "*.*|Tüm dosyalar"
-
-#~ msgid "Loading the JPilot plugin failed"
-#~ msgstr "JPilot eklentisinin yüklenmesi başarısız oldu"
-
-#~ msgid "Error finding the plugin in memory."
-#~ msgstr "Eklenti hafızada bulunamıyor."
-
-#~ msgid "This JPilot plugin does not have a configuration dialog"
-#~ msgstr "Bu JPilot eklentisi bir ayarlama iletişim kutusuna sahip değil"
-
-#~ msgid "Change Plugin Folder"
-#~ msgstr "Eklenti Dizinini Değiştir"
-
-#~ msgid "Add Plugin Folder"
-#~ msgstr "Eklenti Dizini Ekle"
-
-#~ msgid "JPilotProxy Conduit for KPilot"
-#~ msgstr "KPilot için JPilotProxy Bağlantısı"
-
-#~ msgid "Configures the JPilotProxy Conduit for KPilot"
-#~ msgstr "KPilot için JPilotProxy Bağlantısını Ayarlar"
-
-#~ msgid "Original author and maintainer of this conduit"
-#~ msgstr "Bu bağlantının asıl yazarı ve dağıtıcısı"
-
-#~ msgid "Author of JPilot"
-#~ msgstr "JPilot Yazarı"
-
-#~ msgid "Expense"
-#~ msgstr "Masraf"
-
-#~ msgid "JPilot plugin folders:"
-#~ msgstr "JPilot eklenti dizinleri:"
-
-#~ msgid "&Scan Plugin Folders"
-#~ msgstr "&Eklenti Dizinlerini Tara"
-
-#~ msgid "CSV Export"
-#~ msgstr "CSV Aktar"
-
-#~ msgid "&Rotate"
-#~ msgstr "&Yönlendir"
-
-#~ msgid "&Append"
-#~ msgstr "&Ekle"
-
-#~ msgid "Database Export"
-#~ msgstr "VeriTabanı(VT) Aktar"
-
-#~ msgid "DB table:"
-#~ msgstr "VT tablo:"
-
-#~ msgid "DB name:"
-#~ msgstr "VT adı:"
-
-#~ msgid "DB passwd:"
-#~ msgstr "VT parolası:"
-
-#~ msgid "DB login:"
-#~ msgstr "VT giriş:"
-
-#~ msgid "DB server:"
-#~ msgstr "VT sunucusu:"
-
-#~ msgid "username"
-#~ msgstr "kullanıcı adı"
-
-#~ msgid "Database Type"
-#~ msgstr "Veritabanı Türü"
-
-#~ msgid "&PostgreSQL"
-#~ msgstr "&PostgreSQL"
-
-#~ msgid "&MySQL"
-#~ msgstr "&MySQL"
-
-#~ msgid "Password"
-#~ msgstr "Parola"
-
-#~ msgid "<qt>%1<br/>%2</qt>"
-#~ msgstr "<qt>%1<br/>%2</qt>"
-
-#~ msgid "Backing up Pilot. "
-#~ msgstr "Pilot Yedekleniyor. "
-
-#~ msgid "Restoring Pilot. "
-#~ msgstr "Pilot Yeniden Yükleniyor. "
-
-#~ msgid "HotSyncing. "
-#~ msgstr "Senkronizasyon yapılıyor."
-
-#~ msgid "FastSyncing. "
-#~ msgstr "Hızlı-Senkronizasyon."
-
-#, fuzzy
-#~ msgid "&Serial port"
-#~ msgstr "Genel"
-
-#, fuzzy
-#~ msgid "&USB port"
-#~ msgstr "CSV Aktar"
-
-#, fuzzy
-#~ msgid "Actions"
-#~ msgstr "Aktif"
-
-#~ msgid "&Viewers"
-#~ msgstr "&Göstericiler"
-
-#~ msgid "Retrieve Mail"
-#~ msgstr "İletiyi Al"
-
-#~ msgid "POP/Mail"
-#~ msgstr "POP/Posta"
-
-#~ msgid "Popmail"
-#~ msgstr "Popmail"
-
-#~ msgid "Error retrieving mail"
-#~ msgstr "E-posta alırken hata"
-
-#~ msgid " (Timed out)"
-#~ msgstr " (Zaman doldu)"
-
-#~ msgid ""
-#~ "\n"
-#~ "\n"
-#~ "POPMail conduit sent to SMTP server:\n"
-#~ msgstr ""
-#~ "\n"
-#~ "\n"
-#~ "SMTP sunucuya gönderilen POPMail kanalı:\n"
-
-#~ msgid ""
-#~ "\n"
-#~ "SMTP server responded with:\n"
-#~ msgstr ""
-#~ "\n"
-#~ "SMTP sunucu cevabı:\n"
-
-#~ msgid "Cannot connect to SMTP server"
-#~ msgstr "SMTP sunucuya bağlantı kurulamıyor"
-
-#~ msgid "SMTP server failed to announce itself"
-#~ msgstr "SMTP sunucu kendisini tanıtmadı"
-
-#~ msgid "Couldn't EHLO to SMTP server"
-#~ msgstr "SMTP sunucuya EHLO bilgisi gönderilemedi"
-
-#~ msgid "Couldn't start sending new mail."
-#~ msgstr "Yeni e-posta atılamadı."
-
-#~ msgid "The recipient doesn't exist!"
-#~ msgstr "Alıcı bulunamadı!"
-
-#~ msgid "Unable to send message"
-#~ msgstr "İleti gönderilemedi"
-
-#~ msgid "QUIT command to SMTP server failed.\n"
-#~ msgstr "SMTP sunucuya gönderilen QUIT komutunda hata.\n"
-
-#~ msgid "Error reading message"
-#~ msgstr "İleti okunmasında hata"
-
-#~ msgid "Error writing message to the Pilot."
-#~ msgstr "İletinin Pilot'a yazdırılması sırasında hata."
-
-#~ msgid "Please enter your POP password:"
-#~ msgstr "Lütfen POP parolanızı girin:"
-
-#~ msgid "Error writing mail message to Pilot"
-#~ msgstr "E-posta dosyasının yazdırılmasında hata"
-
-#, fuzzy
-#~ msgid "HotSync finished!"
-#~ msgstr "Senkronizasyon tamamlandı."
-
-#~ msgid "SMTP server:"
-#~ msgstr "STMP sunucusu:"
-
-#~ msgid "Sendmail:"
-#~ msgstr "Sendmail:"
-
-#~ msgid "/usr/lib/sendmail -t -i"
-#~ msgstr "/usr/lib/sendmail -t -i"
-
-#~ msgid "Receive method:"
-#~ msgstr "Alma yöntemi:"
-
-#~ msgid "POP server:"
-#~ msgstr "POP sunucusu:"
-
-#~ msgid "POP username:"
-#~ msgstr "POP kullanıcı adı:"
-
-#~ msgid "POP password:"
-#~ msgstr "Pop parolası:"
-
-#~ msgid "pop:110"
-#~ msgstr "pop:110"
-
-#~ msgid "Do Not Receive Mail"
-#~ msgstr "İleti Alma"
-
-#~ msgid "System mailbox:"
-#~ msgstr "Sistem posta kutusu:"
-
-#~ msgid "&Leave mail on server"
-#~ msgstr "İ&letileri sunucuda bırak"
-
-#~ msgid "Save &POP password"
-#~ msgstr "&Pop parolasını kaydet"
-
-#~ msgid "Conduit"
-#~ msgstr "Kanal"
-
-#~ msgid "Conduit Configuration Dialog"
-#~ msgstr "Bağlantı Ayarlama İletişim Kutusu"
-
-#~ msgid ""
-#~ "This is an old-style conduit.\n"
-#~ "To configure it, click the\n"
-#~ "configure button below."
-#~ msgstr ""
-#~ "Bu eski tür bir bağnatıdır.\n"
-#~ "Bunu ayarlamak için\n"
-#~ "aşağıdaki ayarla düğmesine basınız."
-
-#~ msgid ""
-#~ "<p align=\"center\">This conduit appears to be broken and cannot be "
-#~ "configured.</p>"
-#~ msgstr ""
-#~ "<p align=\"center\">Bu bağlantı bozuk gibi görünüyor ve ayarlanamıyor.</p>"
-
-#~ msgid "Send Method"
-#~ msgstr "Göndeme Yöntemi"
-
-#~ msgid "&Do not send mail"
-#~ msgstr "&İletiyi gönderme"
-
-#~ msgid "Use &sendmail"
-#~ msgstr "&Sendmail kullan"
-
-#~ msgid "Use S&MTP"
-#~ msgstr "S&MTP Kullan"
-
-#~ msgid "Email address: "
-#~ msgstr "E-posta adresi: "
-
-#~ msgid "Signature file: "
-#~ msgstr "İmza dosyası: "
-
-#~ msgid "Sendmail command:"
-#~ msgstr "Sendmail komutu:"
-
-#~ msgid "SMTP port:"
-#~ msgstr "SMTP portu:"
-
-#~ msgid "Firewall:"
-#~ msgstr "Güvenlik duvarı:"
-
-#~ msgid "Send mail through KMail immediately"
-#~ msgstr "İletiyi KMail kullanarak hemen gönder"
-
-#~ msgid "Signature File %1 is missing."
-#~ msgstr "İmza Dosyası %1 eksik. "
-
-#~ msgid "Retrieve Method"
-#~ msgstr "Alma Yöntemi"
-
-#~ msgid "Use &POP3 server"
-#~ msgstr "&POP3 sunucu kullan"
-
-#~ msgid "Use &UNIX mailbox"
-#~ msgstr "&UNIX posta kutusu kullan"
-
-#~ msgid "UNIX mailbox:"
-#~ msgstr "UNIX posta kutusu:"
-
-#~ msgid "POP port:"
-#~ msgstr "POP portu:"
-
-#~ msgid "Use SMTP"
-#~ msgstr "SMTP kullan"
-
-#~ msgid "Use POP3 Server"
-#~ msgstr "POP3 sunucu kullan"
-
-#~ msgid "External Conduit Setup"
-#~ msgstr "Harici Kanal Ayarı"
-
-#~ msgid "Activate"
-#~ msgstr "Etkinleştir"
-
-#~ msgid "Deactivate"
-#~ msgstr "Kapat"
-
-#~ msgid "Active"
-#~ msgstr "Aktif"
-
-#~ msgid "Conduits installed on your system but not active"
-#~ msgstr "Sisteminze yüklenmiş fakat aktif olmayan kanallar"
-
-#~ msgid ""
-#~ "The conduit %1 did not identify what database it supports. \n"
-#~ "Please check with the conduits author to correct it."
-#~ msgstr ""
-#~ "Kanal %1 hangi veritabanını desteklediğini bulamadı.\n"
-#~ "Lütfen kanal yazarı ile temasa geçip düzeltilmesini isteyin."
-
-#~ msgid "No executable could be found for the conduit %1."
-#~ msgstr "Kanal %1 için çalıştırılabilir bulunamadı."
-
-#~ msgid ""
-#~ "A conduit is already being set up. Please complete that action before "
-#~ "setting up another conduit."
-#~ msgstr ""
-#~ "Bir kanal şu anda ayarlanmakta .\n"
-#~ "Önce o ayarı bitirip daha sonra başkasına başlayın."
-
-#~ msgid "Conduit Setup Error"
-#~ msgstr "Kanal Kurulum Hatası"
-
-#~ msgid "&Configure Conduits..."
-#~ msgstr "&Kanalları Yapılandır..."
-
-#~ msgid "C&onfigure Conduits..."
-#~ msgstr "Kanalla&rı Yapılandır..."
-
-#~ msgid "unnamed"
-#~ msgstr "isimsiz"
-
-#~ msgid "Last Name:"
-#~ msgstr "Soyadı:"
-
-#~ msgid "First Name:"
-#~ msgstr "Adı:"
-
-#~ msgid "Zip Code:"
-#~ msgstr "Posta Kodu:"
-
-#, fuzzy
-#~ msgid "Adress"
-#~ msgstr "Adres:"
-
-#~ msgid "KNotes Conduit"
-#~ msgstr "KNotes Kanalı"
-
-#~ msgid "Changed %1/%2 Memos/Notes"
-#~ msgstr "%1/%2 Hatırlatma/Not değiştirildi"
-
-#~ msgid "last name"
-#~ msgstr "soyadı"
-
-#~ msgid "first name"
-#~ msgstr "adı"
-
-#~ msgid "title"
-#~ msgstr "ünvan"
-
-#~ msgid "note"
-#~ msgstr "not"
-
-#, fuzzy
-#~ msgid "custom 1"
-#~ msgstr "Özel 1:"
-
-#, fuzzy
-#~ msgid "custom 2"
-#~ msgstr "Özel 2:"
-
-#, fuzzy
-#~ msgid "custom 3"
-#~ msgstr "Özel 3:"
-
-#, fuzzy
-#~ msgid "custom 4"
-#~ msgstr "Özel 4:"
-
-#~ msgid "work phone"
-#~ msgstr "iş telefonu"
-
-#~ msgid "home phone"
-#~ msgstr "ev telefonu"
-
-#~ msgid "mobile phone"
-#~ msgstr "cep telefonu"
-
-#~ msgid "city"
-#~ msgstr "şehir"
-
-#~ msgid "country"
-#~ msgstr "ülke"
-
-#, fuzzy
-#~ msgid "category"
-#~ msgstr "Kategori"
-
-#, fuzzy
-#~ msgid "File could not be opened for reading"
-#~ msgstr "Takvim veritabanı açılamadı."
-
-#, fuzzy
-#~ msgid "Unknown"
-#~ msgstr "[bilinmeyen]"
-
-#, fuzzy
-#~ msgid "Abbrowser Contact"
-#~ msgstr "Abbrowser kanalı"
-
-#, fuzzy
-#~ msgid "Street:"
-#~ msgstr "Eyalet:"
-
-#, fuzzy
-#~ msgid "Fax phone:"
-#~ msgstr "Telefon"
-
-#, fuzzy
-#~ msgid "Company name:"
-#~ msgstr "Kuruluş:"
-
-#, fuzzy
-#~ msgid "Other phone:"
-#~ msgstr "Telefon"
-
-#, fuzzy
-#~ msgid "Palm Pilot Address"
-#~ msgstr "E-posta Adresi: "
-
-#, fuzzy
-#~ msgid "Select Pilot"
-#~ msgstr "KPilot'a Hoşgeldiniz"
-
-#, fuzzy
-#~ msgid "Don't Sync"
-#~ msgstr "Senkronizasyon"
-
-#, fuzzy
-#~ msgid "Deconfliction"
-#~ msgstr "Açıklama"
-
-#, fuzzy
-#~ msgid "<qt>Use key fields to merge address books.</qt>"
-#~ msgstr "Adres defterine yeni bir adres ekler."
-
-#, fuzzy
-#~ msgid "&Install files"
-#~ msgstr "Dosyalar yükleniyor"
-
-#~ msgid "Conduit Error."
-#~ msgstr "Kanal Hatası."
-
-#, fuzzy
-#~ msgid "&Hot Sync (fast)"
-#~ msgstr "Senkronizasyon"
-
-#, fuzzy
-#~ msgid "Do &nothing"
-#~ msgstr "Tekrar sorma"
-
-#, fuzzy
-#~ msgid "&KAddressbook overrides"
-#~ msgstr "Abbrowser kanalı"
-
-#, fuzzy
-#~ msgid "&User choose"
-#~ msgstr "kullanıcı adı"
-
-#, fuzzy
-#~ msgid "&Desktop overrides handheld"
-#~ msgstr "Pilot yeniden yükleniyor. "
-
-#, fuzzy
-#~ msgid "Address Formats"
-#~ msgstr "Adres Düzenleyici"
-
-#, fuzzy
-#~ msgid "Skip:"
-#~ msgstr "&Geç"
-
-#, fuzzy
-#~ msgid "&Local overrides Pilot"
-#~ msgstr "Pilot yeniden yükleniyor. "
-
-#, fuzzy
-#~ msgid "do nothing (ask again next sync)"
-#~ msgstr "Tekrar sorma"
-
-#, fuzzy
-#~ msgid "Active Conduits"
-#~ msgstr "KNotes Kanalı"
-
-#, fuzzy
-#~ msgid "Available Conduits"
-#~ msgstr "Kullanılabilir kanalları listele"
-
-#, fuzzy
-#~ msgid "Original Author of KPilot"
-#~ msgstr "Asıl Yazar"
-
-#, fuzzy
-#~ msgid "Unable to delete the text file \"%1\" on the PC"
-#~ msgstr "&quot;%1&quot; dosyası açılamıyor!"
-
-#, fuzzy
-#~ msgid "Completely ignore database"
-#~ msgstr "Veritabanı açılamadı"
-
-#~ msgid "Save as iCalendar file"
-#~ msgstr "iCalendar dosyası olarak kaydet"
-
-#, fuzzy
-#~ msgid "Sync failed for database: "
-#~ msgstr "%1 veritabanı senkronize ediliyor"
-
-#, fuzzy
-#~ msgid "ListMaker Conduit for KPilot"
-#~ msgstr "KPilot için Boş Kanal"
-
-#, fuzzy
-#~ msgid "Configures the ListMaker Conduit for KPilot"
-#~ msgstr "KPilot için Boş Kanalı Yapılandırır"
-
-#, fuzzy
-#~ msgid "Original Author of the VCal conduit"
-#~ msgstr "Asıl Yazar"
-
-#, fuzzy
-#~ msgid "file locations"
-#~ msgstr "Açıklama"
-
-#, fuzzy
-#~ msgid ""
-#~ "New memo cannot be edited until\n"
-#~ "HotSynced with pilot."
-#~ msgstr ""
-#~ "Yeni notun düzeltilmesi pilot ile \n"
-#~ "bağlantı kurulmadan olmaz."
-
-#, fuzzy
-#~ msgid "<qt>What to map the pim's \"Fax\" field to locally</qt>"
-#~ msgstr ""
-#~ "Yüklenecek dosya listesine eklemek\n"
-#~ "için bir dosya seçin."
-
-#, fuzzy
-#~ msgid ""
-#~ "<qt>Use key fields (like Name and Company) to merge address books</qt>"
-#~ msgstr "Adres defterine yeni bir adres ekler."
-
-#~ msgid "Browse"
-#~ msgstr "Gözat"
-
-#, fuzzy
-#~ msgid "Cannot delete new records until Hot-Synced with pilot."
-#~ msgstr ""
-#~ "Yeni kayıtların silinmesi pilot ile \n"
-#~ "senkronizasyon kurulmadan yapılamaz."
-
-#, fuzzy
-#~ msgid "Last Name"
-#~ msgstr "Soyadı:"
-
-#, fuzzy
-#~ msgid "First Name"
-#~ msgstr "Adı:"
-
-#, fuzzy
-#~ msgid "home address"
-#~ msgstr "Adres:"
-
-#, fuzzy
-#~ msgid "work address"
-#~ msgstr "Adres:"
-
-#~ msgid "Files To Install:"
-#~ msgstr "Yüklenecek Dosyalar"
-
-#, fuzzy
-#~ msgid "Prompt before changing data"
-#~ msgstr "&Veriyi değiştirmeden önce bildir."
-
-#, fuzzy
-#~ msgid "Delete locally deleted records on PDA"
-#~ msgstr "Pilot üzerindeki silinmiş kayıtları yerel olarak sil"
-
-#, fuzzy
-#~ msgid ""
-#~ "<qt>The %1 could not open the file `%2'. Please configure the conduit "
-#~ "with the correct filename and try again.</qt>"
-#~ msgstr ""
-#~ "%1 '%2' dosyasını açamıyor. Lütfen kanalı doğru dosya adı ile "
-#~ "yapılandırın ve tekrar deneyin."
-
-#~ msgid "%1 Fatal Error"
-#~ msgstr "%1 Kritik Hatası."
-
-#~ msgid "ToDo Conduit"
-#~ msgstr "Yapılacaklar Kanalı"
-
-#, fuzzy
-#~ msgid ""
-#~ "<qt>This is the first time that you have done a HotSync with the "
-#~ "vCalendar conduit. There is a to-do item in the PalmPilot which is not in "
-#~ "the vCalendar (KOrganizer).<br>Item: <i>%1</i><br>What must be done with "
-#~ "this item?</qt>"
-#~ msgstr ""
-#~ "vCalendar kanalı ile ilk defa senkronizasyon yapılıyor.\n"
-#~ "PalmPilot'ta, vCalendar (KOrganizer) içinde yeralmayan\n"
-#~ "bir randevu var.\n"
-#~ "\n"
-
-#~ msgid "&Skip"
-#~ msgstr "&Geç"
-
-#~ msgid "Insert &All"
-#~ msgstr "Tümünü &Ekle"
-
-#~ msgid ""
-#~ "This is the first time that you have done a HotSync\n"
-#~ "with the vCalendar conduit. There is an appointment\n"
-#~ "in the PalmPilot which is not in the vCalendar (KOrganizer).\n"
-#~ "\n"
-#~ msgstr ""
-#~ "vCalendar kanalı ilke ilk defa senkronizasyon yapılıyor.\n"
-#~ "PalmPilot'ta, vCalendar (KOrganizer) içinde yeralmayan\n"
-#~ "bir randevu var.\n"
-#~ "\n"
-
-#~ msgid ""
-#~ "Appointment: %1.\n"
-#~ "\n"
-#~ "What must be done with this appointment?"
-#~ msgstr ""
-#~ "Randevu: %1.\n"
-#~ "\n"
-#~ "Bu randevu ne yapılsın?"
-
-#~ msgid "KPilot vCalendar Conduit"
-#~ msgstr "KPilot vCalendar Kanalı"
-
-#~ msgid "Replace all data on Pilot with local data?"
-#~ msgstr "Pilottaki bilgiler tamamen değiştirilsin mi?"
-
-#~ msgid "Full Restore"
-#~ msgstr "Tamamını geri yükle"
-
-#~ msgid "Restoring databases to Palm Pilot. Slow sync required."
-#~ msgstr ""
-#~ "Palm Pilot'a bilgiler geri yükleniyor. Yavaş senkronizasyon gerekli."
-
-#~ msgid "Backing up all data..."
-#~ msgstr "Tüm veriler yedekleniyor..."
-
-#~ msgid ""
-#~ "Exiting on cancel.\n"
-#~ "<B>Not</B> all the data was backed up."
-#~ msgstr ""
-#~ "İşlem iptal edildi.\n"
-#~ "<b>Not</b>:Tüm veriler yedeklendi."
-
-#~ msgid "Backing Up: "
-#~ msgstr "Yedekleniyor: "
-
-#~ msgid "Could not backup data!"
-#~ msgstr "Bilgiler yedeklenmedi!"
-
-#~ msgid "Missing File"
-#~ msgstr "Kayıp Dosya"
-
-#~ msgid "Install File Error"
-#~ msgstr "Kurulum Dosyası Hatası"
-
-#~ msgid "%1: Running conduit"
-#~ msgstr "%1: Çalışan kanallar"
-
-#~ msgid "Could not backup data for database &quot;%1&quot;"
-#~ msgstr "&quot;%1&quot; için veri yedeklenemedi"
-
-#, fuzzy
-#~ msgid "No previous copy. Copying data from pilot..."
-#~ msgstr "Önceden alınmış kopya yok. Pilot'tan veri alınıyor..."
-
-#~ msgid "Hot-Syncing Pilot. Looking for modified data..."
-#~ msgstr ""
-#~ "Pilot ile senkronizasyon yapılıyor. Değiştirilmiş veriler aranıyor..."
-
-#~ msgid "Cannot find database &quot;%1&quot;"
-#~ msgstr "&quot;%1&quot; veritabanı bulunamadı"
-
-#~ msgid "Error Syncing Database"
-#~ msgstr "Veritabanı Senkronizasyonunda Hata"
-
-#~ msgid ""
-#~ "Item: %1.\n"
-#~ "\n"
-#~ "What must be done with this item?"
-#~ msgstr ""
-#~ "Öğe: %1.\n"
-#~ "\n"
-#~ "Bu öğe ne yapılsın?"
-
-#~ msgid "Performing a TestSync."
-#~ msgstr "Test Senkronizasyonu Yapılıyor."
-
-#~ msgid "POP Mail Conduit"
-#~ msgstr "POP E-posta Kanalı"
-
-#~ msgid "TDE2 port"
-#~ msgstr "TDE2 aktarımı"
-
-#~ msgid "NULL Conduit author"
-#~ msgstr "Boş Kanal düzenleyici"
-
-#~ msgid "Receiving Mail"
-#~ msgstr "İleti Alınıyor"
-
-#~ msgid ""
-#~ "The NULL conduit doesn't actually do anything.\n"
-#~ "Fill in databases you don't want to sync in\n"
-#~ "the database field, separated by commas."
-#~ msgstr ""
-#~ "Boş kanal aslında hiç birşey yapmıyor.\n"
-#~ "Senkronize etmek istediğiniz veritabanlarını\n"
-#~ "veritabanı alanına virgüllerle ayırarak yazın."
-
-#~ msgid "NULL conduit was here!"
-#~ msgstr "Boş Kanal"
-
-#~ msgid ""
-#~ "Enter a message here. This message will be entered into\n"
-#~ "the Pilot's HotSync log when the NULL conduit runs."
-#~ msgstr ""
-#~ "Buraya bir mesaj yazın. Bu mesaj boş kanal çalıştığı zaman\n"
-#~ "Pilot'un HotSync günlüğüne girilecektir."
-
-#~ msgid ""
-#~ "Enter a list of database names here. The NULL conduit\n"
-#~ "will be run for each of these databases, effectively\n"
-#~ "preventing them from being HotSynced."
-#~ msgstr ""
-#~ "Buraya veritabanı isimlerini yazın. Boş kanal her veritabanı için \n"
-#~ "çalışacak ve senkronize edilmelerini önleyecektir."
-
-#, fuzzy
-#~ msgid "Log File"
-#~ msgstr "Yapılacaklar Dosyası"