Drop automake build support.

Signed-off-by: Michele Calgaro <michele.calgaro@yahoo.it>

17 files changed, 38 insertions, 423 deletions

diff --git a/.gitmodules b/.gitmodules
deleted file mode 100644
index 934def7..0000000
--- a/.gitmodules
+++ /dev/null
@@ -1,3 +0,0 @@
-[submodule "admin"]
-	path = admin
-	url = https://system@scm.trinitydesktop.org/scm/git/tde-common-admin
diff --git a/INSTALL b/INSTALL
index 8b17418..f034a2a 100644
--- a/INSTALL
+++ b/INSTALL
@@ -1,222 +1,16 @@
-Binary packages
----------------
-
-On Debian and derivate distributions you can use the Marillat repository:
-
-echo 'deb http://www.debian-multimedia.org unstable main' >> /etc/apt/sources.list
-apt-get update
-apt-get install mplayer kplayer libdvdcss w32codecs
-
-Visit the KPlayer home page for links to binary packages for other distros:
-http://kplayer.sourceforge.net/
-
-
-Compiling from source tarball or CVS
-------------------------------------
-
-Extract the tarball
-
-  tar xjf kplayer-0.6.3.tar.bz2
-  cd kplayer-0.6.3
-
-Or download code from CVS
-
-  cvs -d:pserver:anonymous@kplayer.cvs.sourceforge.net:/cvsroot/kplayer login
-  cvs -z3 -d:pserver:anonymous@kplayer.cvs.sourceforge.net:/cvsroot/kplayer co -P kplayer
-  cd kplayer
-
-Create configure script
-
-  make -f Makefile.dist
-
-Configure
-
-  ./configure --prefix=`tde-config --prefix`
-
-Compile
-
-  make
-
-Install
-
-  su -c 'make install'
-
-Run
-
-  kplayer
-
-If configure fails
-------------------
-
-Install the correct version of the software configure is complaining
-about. Look in the config.log for more information on what went wrong.
-
-Following is the standard INSTALL file that comes with KDevelop
----------------------------------------------------------------
-
 Basic Installation
 ==================
 
-   These are generic installation instructions.
-
-   The `configure' shell script attempts to guess correct values for
-various system-dependent variables used during compilation.  It uses
-those values to create a `Makefile' in each directory of the package.
-It may also create one or more `.h' files containing system-dependent
-definitions.  Finally, it creates a shell script `config.status' that
-you can run in the future to recreate the current configuration, a file
-`config.cache' that saves the results of its tests to speed up
-reconfiguring, and a file `config.log' containing compiler output
-(useful mainly for debugging `configure').
-
-   If you need to do unusual things to compile the package, please try
-to figure out how `configure' could check whether to do them, and mail
-diffs or instructions to the address given in the `README' so they can
-be considered for the next release.  If at some point `config.cache'
-contains results you don't want to keep, you may remove or edit it.
-
-   The file `configure.in' is used to create `configure' by a program
-called `autoconf'.  You only need `configure.in' if you want to change
-it or regenerate `configure' using a newer version of `autoconf'.
-
-The simplest way to compile this package is:
-
-  1. `cd' to the directory containing the package's source code and type
-     `./configure' to configure the package for your system.  If you're
-     using `csh' on an old version of System V, you might need to type
-     `sh ./configure' instead to prevent `csh' from trying to execute
-     `configure' itself.
-
-     Running `configure' takes a while.  While running, it prints some
-     messages telling which features it is checking for.
-
-  2. Type `make' to compile the package.
-
-  3. Type `make install' to install the programs and any data files and
-     documentation.
-
-  4. You can remove the program binaries and object files from the
-     source code directory by typing `make clean'.  
-
-Compilers and Options
-=====================
-
-   Some systems require unusual options for compilation or linking that
-the `configure' script does not know about.  You can give `configure'
-initial values for variables by setting them in the environment.  Using
-a Bourne-compatible shell, you can do that on the command line like
-this:
-     CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure
-
-Or on systems that have the `env' program, you can do it like this:
-     env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure
-
-Compiling For Multiple Architectures
-====================================
-
-   You can compile the package for more than one kind of computer at the
-same time, by placing the object files for each architecture in their
-own directory.  To do this, you must use a version of `make' that
-supports the `VPATH' variable, such as GNU `make'.  `cd' to the
-directory where you want the object files and executables to go and run
-the `configure' script.  `configure' automatically checks for the
-source code in the directory that `configure' is in and in `..'.
-
-   If you have to use a `make' that does not supports the `VPATH'
-variable, you have to compile the package for one architecture at a time
-in the source code directory.  After you have installed the package for
-one architecture, use `make distclean' before reconfiguring for another
-architecture.
-
-Installation Names
-==================
-
-   By default, `make install' will install the package's files in
-`/usr/local/bin', `/usr/local/man', etc.  You can specify an
-installation prefix other than `/usr/local' by giving `configure' the
-option `--prefix=PATH'.
-
-   You can specify separate installation prefixes for
-architecture-specific files and architecture-independent files.  If you
-give `configure' the option `--exec-prefix=PATH', the package will use
-PATH as the prefix for installing programs and libraries.
-Documentation and other data files will still use the regular prefix.
-
-   If the package supports it, you can cause programs to be installed
-with an extra prefix or suffix on their names by giving `configure' the
-option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
-
-Optional Features
-=================
-
-   Some packages pay attention to `--enable-FEATURE' options to
-`configure', where FEATURE indicates an optional part of the package.
-They may also pay attention to `--with-PACKAGE' options, where PACKAGE
-is something like `gnu-as' or `x' (for the X Window System).  The
-`README' should mention any `--enable-' and `--with-' options that the
-package recognizes.
-
-   For packages that use the X Window System, `configure' can usually
-find the X include and library files automatically, but if it doesn't,
-you can use the `configure' options `--x-includes=DIR' and
-`--x-libraries=DIR' to specify their locations.
-
-Specifying the System Type
-==========================
-
-   There may be some features `configure' can not figure out
-automatically, but needs to determine by the type of host the package
-will run on.  Usually `configure' can figure that out, but if it prints
-a message saying it can not guess the host type, give it the
-`--host=TYPE' option.  TYPE can either be a short name for the system
-type, such as `sun4', or a canonical name with three fields:
-     CPU-COMPANY-SYSTEM
-
-See the file `config.sub' for the possible values of each field.  If
-`config.sub' isn't included in this package, then this package doesn't
-need to know the host type.
-
-   If you are building compiler tools for cross-compiling, you can also
-use the `--target=TYPE' option to select the type of system they will
-produce code for and the `--build=TYPE' option to select the type of
-system on which you are compiling the package.
-
-Sharing Defaults
-================
-
-   If you want to set default values for `configure' scripts to share,
-you can create a site shell script called `config.site' that gives
-default values for variables like `CC', `cache_file', and `prefix'.
-`configure' looks for `PREFIX/share/config.site' if it exists, then
-`PREFIX/etc/config.site' if it exists.  Or, you can set the
-`CONFIG_SITE' environment variable to the location of the site script.
-A warning: not all `configure' scripts look for a site script.
-
-Operation Controls
-==================
-
-   `configure' recognizes the following options to control how it
-operates.
-
-`--cache-file=FILE'
-     Use and save the results of the tests in FILE instead of
-     `./config.cache'.  Set FILE to `/dev/null' to disable caching, for
-     debugging `configure'.
-
-`--help'
-     Print a summary of the options to `configure', and exit.
-
-`--quiet'
-`--silent'
-`-q'
-     Do not print messages saying which checks are being made.
-
-`--srcdir=DIR'
-     Look for the package's source code in directory DIR.  Usually
-     `configure' can determine that directory automatically.
+kplayer relies on cmake to build.
 
-`--version'
-     Print the version of Autoconf used to generate the `configure'
-     script, and exit.
+Here are suggested default options:
 
-`configure' also accepts some other, not widely useful, options.
+ -DCMAKE_INSTALL_PREFIX="/opt/trinity" \
+ -DCONFIG_INSTALL_DIR="/etc/trinity" \
+ -DSYSCONF_INSTALL_DIR="/etc/trinity" \
+ -DXDG_MENU_INSTALL_DIR="/etc/xdg/menus" \
+ -DCMAKE_BUILD_TYPE=RelWithDebInfo \
+ -DCMAKE_VERBOSE_MAKEFILE="ON" \
+ -DCMAKE_SKIP_RPATH="OFF" \
+ -DBUILD_ALL="ON" \
+ -DWITH_ALL_OPTIONS="ON"
diff --git a/Makefile.am b/Makefile.am
deleted file mode 100644
index 64fe61d..0000000
--- a/Makefile.am
+++ /dev/null
@@ -1,12 +0,0 @@
-SUBDIRS = $(TOPSUBDIRS)
-
-AUTOMAKE_OPTIONS = dist-bzip2 foreign 
-
-MAINTAINERCLEANFILES = subdirs configure.in acinclude.m4 configure.files 
-
-appdatadir = $(kde_datadir)/kplayer
-appdata_DATA = COPYING
-
-package-messages:
-	$(MAKE) -f admin/Makefile.common package-messages
-	$(MAKE) -C po merge
diff --git a/Makefile.dist b/Makefile.dist
deleted file mode 100644
index 4c0afd1..0000000
--- a/Makefile.dist
+++ /dev/null
@@ -1,10 +0,0 @@
-all: 
-	@echo "This Makefile is only for the CVS repository"
-	@echo "This will be deleted before making the distribution"
-	@echo ""
-	$(MAKE) -f admin/Makefile.common cvs
-
-dist:
-	$(MAKE) -f admin/Makefile.common dist
-
-.SILENT:
diff --git a/README b/README.md
index d8880b0..b0b680c 100644
--- a/README
+++ b/README.md
@@ -1,11 +1,11 @@
-KPlayer is a KDE multimedia player.
+KPlayer - a TDE multimedia player.
 
 With KPlayer you can easily play a wide variety of video and audio files and
-streams using a rich and friendly interface compliant with KDE standards.
+streams using a rich and friendly interface compliant with TDE standards.
 
 Features include
 - video, audio and subtitle playback from file, URL, DVD, VCD,
-  audio CD, TV, DVB, etc., as well as KDE I/O Slaves;
+  audio CD, TV, DVB, etc., as well as TDE I/O Slaves;
 - volume, contrast, brightness, hue and saturation controls;
 - zooming, full screen and fixed aspect options;
 - status and progress display and seeking;
@@ -13,78 +13,14 @@ Features include
 - configuration dialog and file specific options;
 - KPart for integration with Konqueror, KMLDonkey, etc.
 
+
 Requirements
 ------------
 
-A recent MPlayer
-
-   KPlayer uses the famous MPlayer, www.mplayerhq.hu, as the backend for
-   playing audio and video files and streams. This ensures the maximum
-   variety of supported types of files and encodings.
-
    You need to have MPlayer version 1.0rc1 or later.
-
-   If there are good binary packages for your distribution, use those.
-   For example on Debian unstable you would do
-
-   echo 'deb http://www.debian-multimedia.org unstable main' >> /etc/apt/sources.list
-   apt-get update
-   apt-get install mplayer kplayer libdvdcss w32codecs
-
-   Substitute unstable for stable or testing as needed.
-
-   As always compiling from source is an option.
-
-   If you got an mplayer.conf in /etc/mplayer or a ~/.mplayer/config,
-   check them to make sure that they do not have a line like "gui=yes".
-   Kill it dead if you find it. Use 'gmplayer' if you ever decide to
-   use MPlayer's own GUI (not recommended).
-
-   It is perfectly fine if you want to remove the MPlayer config files
-   entirely. However, they may be useful as an alternative way of
-   specifying options that KPlayer does not yet support directly.
-
-X11 and XVideo
-
    X11 is required. X.org is the best choice here.
+   XVideo extension is recommended.
 
-   XVideo extension is recommended. You can check your /etc/X11/xorg.conf
-   file for a line that reads
-
-   Load "extmod"
-
-   This is the line that loads XVideo extension, so make sure it is not
-   disabled. Also check /var/log/Xorg.0.log to make sure that XVideo
-   is loaded without error.
-
-Qt and KDE
-
-   KPlayer supports KDE 3.1 and later, so you need to either run a
-   relatively recent KDE (recommended) or at least have KDE libraries
-   and the corresponding Qt libraries on your system.
-
-Installation
-------------
-
-See INSTALL.
-
-Support
--------
-
-If you have any problems, questions, support requests, come to the KPlayer
-user forum: http://sourceforge.net/forum/forum.php?forum_id=244388
-
-For issues that take longer time to resolve use the issue trackers:
-bugs: http://sourceforge.net/tracker/?atid=532182&group_id=71710
-support requests: http://sourceforge.net/tracker/?atid=532183&group_id=71710
-feature requests: http://sourceforge.net/tracker/?atid=532185&group_id=71710
-that way your issue will not be lost or forgotten.
-
-The forum and the trackers require you to be registered and logged in.
-This is so that people do not post questions only to never come back to
-check on the response.
-
-There is also an IRC channel for KPlayer discussions: #kplayer on FreeNode.
 
 Playing video DVDs and CDs, audio CDs, data CDs and DVDs, TV, and DVB
 ---------------------------------------------------------------------
@@ -106,6 +42,7 @@ Multimedia Library, expand the Devices subtree, right click a device and
 choose Properties. The Channel List option is on the General page. There
 are many more options for both disk and tuner devices.
 
+
 Multimedia Library
 ------------------
 
@@ -143,6 +80,7 @@ Remote files and streams can be put on the collection and playlists by
 using the Add URL command on the Library menu or the right click context
 menu.
 
+
 Multitrack files and streams
 ----------------------------
 
@@ -152,6 +90,7 @@ submenus of the Player menu. Audio and subtitle tracks will be labelled
 with their language if it is known. You can also choose the tracks in the
 File Properties.
 
+
 Configuration
 -------------
 
@@ -182,6 +121,7 @@ for your file to finish playing or kill your X session. If you really have
 to, you can edit or remove the input.conf file in share/apps/kplayer, but
 that is not recommended, nor are -vo sdl and -vo svga for that matter.
 
+
 File properties
 ---------------
 
@@ -207,6 +147,7 @@ if you change Frame Drop without holding Shift, the new setting will become
 the default, and will be used for all URLs that do not have it set
 explicitly.
 
+
 Full screen mode
 ----------------
 
@@ -216,22 +157,26 @@ Double clicking the video area also switches between full screen and normal
 mode. You can also hit the Esc key, which will stop playback and end the
 full screen mode.
 
-History
--------
 
-See ChangeLog.
+Contributing
+--------------
 
-Known issues
-------------
+If you wish to contribute to kplayer, you might do so:
+
+- TDE Gitea Workspace (TGW) collaboration tool.
+  https://mirror.git.trinitydesktop.org/gitea
+
+- TDE Weblate Translation Workspace (TWTW) collaboration tool.
+  https://mirror.git.trinitydesktop.org/weblate
 
-See BUGS.
 
-Online manuals and HOWTOs
--------------------------
+Translations status
+---------------------
 
-KPlayer user manual is available online at
-http://docs.kde.org/development/en/extragear-multimedia/kplayer/
-or http://kplayer.sourceforge.net/manual/
+### messages
+[![Translations status](https://mirror.git.trinitydesktop.org/weblate/widgets/applications/-/kplayer/multi-auto.svg
+"Engage in translating")](https://mirror.git.trinitydesktop.org/weblate/projects/applications/kplayer/)
 
-In particular the manual has a few micro HOWTOs that will give you many
-useful tips on how to get the most out of KPlayer and your multimedia.
+### desktop files
+[![Translations status](https://mirror.git.trinitydesktop.org/weblate/widgets/applications/-/kplayer-desktop-files/multi-auto.svg
+"Engage in translating")](https://mirror.git.trinitydesktop.org/weblate/projects/applications/kplayer-desktop-files/)
diff --git a/admin b/admin
deleted file mode 160000
-Subproject a7f75ac0ff587d5b8694a1b78557597161f8104
diff --git a/configure.in.in b/configure.in.in
deleted file mode 100644
index 1a71258..0000000
--- a/configure.in.in
+++ /dev/null
@@ -1,9 +0,0 @@
-#MIN_CONFIG(3)
-
-AM_INIT_AUTOMAKE(kplayer,0.6.3)
-AC_C_BIGENDIAN
-AC_CHECK_KDEMAXPATHLEN
-
-AC_CHECK_FUNCS(mkfifo)
-AC_CHECK_HEADERS(sys/soundcard.h machine/soundcard.h soundcard.h)
-AC_CHECK_HEADERS(sys/sysmacros.h)
diff --git a/doc/Makefile.am b/doc/Makefile.am
deleted file mode 100644
index edb05e8..0000000
--- a/doc/Makefile.am
+++ /dev/null
@@ -1 +0,0 @@
-SUBDIRS = $(AUTODIRS)  
diff --git a/doc/da/Makefile.am b/doc/da/Makefile.am
deleted file mode 100644
index 9527a08..0000000
--- a/doc/da/Makefile.am
+++ /dev/null
@@ -1,2 +0,0 @@
-KDE_LANG=da
-KDE_DOCS=kplayer
diff --git a/doc/en/Makefile.am b/doc/en/Makefile.am
deleted file mode 100644
index 3e72f3c..0000000
--- a/doc/en/Makefile.am
+++ /dev/null
@@ -1,2 +0,0 @@
-KDE_LANG = en
-KDE_DOCS = kplayer
diff --git a/doc/es/Makefile.am b/doc/es/Makefile.am
deleted file mode 100644
index 5ed15a5..0000000
--- a/doc/es/Makefile.am
+++ /dev/null
@@ -1,2 +0,0 @@
-KDE_LANG=es
-KDE_DOCS=kplayer
diff --git a/doc/it/Makefile.am b/doc/it/Makefile.am
deleted file mode 100644
index 13d1d2d..0000000
--- a/doc/it/Makefile.am
+++ /dev/null
@@ -1,2 +0,0 @@
-KDE_LANG=it
-KDE_DOCS=kplayer
diff --git a/doc/pt/Makefile.am b/doc/pt/Makefile.am
deleted file mode 100644
index 0e8a08e..0000000
--- a/doc/pt/Makefile.am
+++ /dev/null
@@ -1,2 +0,0 @@
-KDE_LANG=pt
-KDE_DOCS=kplayer
diff --git a/doc/sv/Makefile.am b/doc/sv/Makefile.am
deleted file mode 100644
index 4dc901b..0000000
--- a/doc/sv/Makefile.am
+++ /dev/null
@@ -1,2 +0,0 @@
-KDE_LANG=sv
-KDE_DOCS=kplayer
diff --git a/icons/Makefile.am b/icons/Makefile.am
deleted file mode 100644
index 139b609..0000000
--- a/icons/Makefile.am
+++ /dev/null
@@ -1,3 +0,0 @@
-# KDE_ICON = AUTO
-kplayericonsdir = $(kde_datadir)/kplayer/icons
-kplayericons_ICON = AUTO
diff --git a/kplayer/Makefile.am b/kplayer/Makefile.am
deleted file mode 100644
index 7042a35..0000000
--- a/kplayer/Makefile.am
+++ /dev/null
@@ -1,73 +0,0 @@
-bin_PROGRAMS = kplayer
-
-kplayer_SOURCES = kplayerpropertiesdevice.ui kplayernodeaction.cpp kplayernodeview.cpp kplayerplaylist.cpp kplayersettingsdialog.cpp kplayersettingssubtitles.ui kplayersettingsbrightness.ui kplayersettingsvolume.ui kplayersettingssaturation.ui kplayersettingsprogress.ui kplayersettingshue.ui kplayersettingscontrols.ui kplayersettingssliders.ui kplayersettingscontrast.ui kplayerlogwindow.cpp kplayersettingsvideo.ui kplayersettingsaudio.ui kplayersettingsadvanced.ui kplayersettingsgeneral.ui kplayer.cpp main.cpp 
-
-kplayer_LDADD   = libkplayernoinst.la $(LIB_TDEPARTS) $(LIB_TDEIO) $(LIB_TDEUI) $(LIB_TDECORE) $(LIB_TQT) $(LIBSOCKET) -lDCOP
-kplayer_COMPILE_FIRST= kplayerpropertiesadvanced.h kplayerpropertiesaudio.h kplayerpropertiesdevice.h kplayerpropertiesgeneral.h kplayerpropertiessize.h kplayerpropertiessubtitles.h kplayerpropertiesvideo.h kplayersettingsadvanced.h kplayersettingsaudio.h kplayersettingsbrightness.h kplayersettingscontrast.h kplayersettingscontrols.h kplayersettingsgeneral.h kplayersettingshue.h kplayersettingsprogress.h kplayersettingssaturation.h kplayersettingssliders.h kplayersettingssubtitles.h kplayersettingsvideo.h kplayersettingsvolume.h
-
-# These paths are KDE specific. Use them:
-# kde_appsdir         Where your application's menu entry (.desktop) should go to.
-# kde_icondir         Where your icon should go to - better use KDE_ICON.
-# kde_sounddir        Where your sounds should go to.
-# kde_htmldir         Where your docs should go to. (contains lang subdirs)
-# kde_datadir         Where you install application data. (Use a subdir)
-# kde_locale          Where translation files should go to. (contains lang subdirs)
-# kde_cgidir          Where cgi-bin executables should go to.
-# kde_confdir         Where config files should go to (system-wide ones with default values).
-# kde_mimedir         Where mimetypes .desktop files should go to.
-# kde_servicesdir     Where services .desktop files should go to.
-# kde_servicetypesdir Where servicetypes .desktop files should go to.
-# kde_toolbardir      Where general toolbar icons should go to (deprecated, use KDE_ICON).
-# kde_wallpaperdir    Where general wallpapers should go to.
-# kde_templatesdir    Where templates for the "New" menu (Konqueror/KDesktop) should go to.
-# kde_bindir          Where executables should go to. Use bin_PROGRAMS or bin_SCRIPTS.
-# kde_libdir          Where shared libraries should go to. Use lib_LTLIBRARIES.
-# kde_moduledir       Where modules (e.g. parts) should go to. Use kde_module_LTLIBRARIES.
-# kde_styledir        Where Qt/KDE widget styles should go to (new in KDE 3).
-# kde_designerdir     Where Qt Designer plugins should go to (new in KDE 3).
-
-# set the include path for X, qt and KDE
-INCLUDES= $(all_includes)
-
-# METASOURCES = AUTO
-kplayer_METASOURCES = kplayer.moc kplayerlogwindow.moc kplayersettingsdialog.moc kplayerplaylist.moc kplayernodeaction.moc kplayernodeview.moc
-
-KDE_ICON = kplayer
-
-# the library search path. 
-kplayer_LDFLAGS = $(all_libraries) $(KDE_RPATH)
-
-noinst_LTLIBRARIES = libkplayernoinst.la
-libkplayernoinst_la_LDFLAGS = $(all_libraries) -no-undefined
-libkplayernoinst_la_SOURCES = x11.cpp kplayerwidget.cpp kplayerslideraction.cpp kplayerprocess.cpp kplayersettings.cpp kplayerproperties.cpp kplayeractionlist.cpp kplayerengine.cpp kplayersource.cpp kplayernode.cpp kplayerpropertiesdialog.cpp kplayerpropertiesgeneral.ui kplayerpropertiessize.ui kplayerpropertiessubtitles.ui kplayerpropertiesaudio.ui kplayerpropertiesvideo.ui kplayerpropertiesadvanced.ui
-libkplayernoinst_la_LIBADD = $(LIB_TDEIO) $(LIB_TDEUI) $(LIB_TDECORE) $(LIB_TQT)
-libkplayernoinst_la_METASOURCES = kplayerwidget.moc kplayerslideraction.moc kplayerprocess.moc kplayersettings.moc kplayerproperties.moc kplayeractionlist.moc kplayerengine.moc kplayerpropertiesdialog.moc kplayersource.moc kplayernode.moc
-
-kde_module_LTLIBRARIES = libkplayerpart.la
-libkplayerpart_la_LDFLAGS = $(all_libraries) $(KDE_PLUGIN) -module -no-undefined
-libkplayerpart_la_SOURCES = kplayerpart.cpp
-libkplayerpart_la_LIBADD = $(LIB_TDEPARTS) $(LIB_TDEIO) $(LIB_TDEUI) $(LIB_TDECORE) $(LIB_TQT) -lDCOP libkplayernoinst.la
-libkplayerpart_la_METASOURCES = kplayerpart.moc
-
-# Uncomment the following two lines if you add a ui.rc file for your application to make use of KDEs XML GUI builing
-rcdir = $(kde_datadir)/kplayer
-rc_DATA = kplayerui.rc
-
-partdir = $(kde_datadir)/kplayer
-part_DATA = kplayerpartui.rc
-
-appdatadir = $(kde_datadir)/kplayer
-appdata_DATA = input.conf
-
-xdg_apps_DATA = kplayer.desktop
-
-kde_services_DATA = kplayerpart.desktop
-
-servicemenudir = $(kde_datadir)/konqueror/servicemenus
-servicemenu_DATA = kplayer-play-queue.desktop kplayer-next.desktop kplayer-directory.desktop kplayer-actions.desktop
-
-messages: rc.cpp
-	LIST=`find . -name \*.h -o -name \*.hh -o -name \*.H -o -name \*.hxx -o -name \*.hpp -o -name \*.cpp -o -name \*.cc -o -name \*.cxx -o -name \*.ecpp -o -name \*.C`; \
-	if test -n "$$LIST"; then \
-	 $(XGETTEXT) $$LIST -o $(podir)/kplayer.pot; \
-	fi
diff --git a/po/Makefile.am b/po/Makefile.am
deleted file mode 100644
index 0fa209c..0000000
--- a/po/Makefile.am
+++ /dev/null
@@ -1 +0,0 @@
-POFILES = AUTO