Remove additional unneeded tq method conversions

18 files changed, 87 insertions, 87 deletions

diff --git a/ChangeLog b/ChangeLog
index f226149..d3c10f3 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -164,7 +164,7 @@
 
 	* configure.in.in: Don't check any longer for PolicyKit
 	>= v0.4, simply check if libhal provide the following
-	function: libhal_tqdevice_is_caller_privileged() to check 
+	function: libhal_device_is_caller_privileged() to check 
 	if KPowersave should use libhal or the old PolicyKit 
 	D-Bus interface.
 
@@ -401,7 +401,7 @@
 
 	* configure.in.in: Changed detection if we need to call
 	new PolicyKit/HAL instead of PolicyKit D-Bus daemon to
-	check for libhal_tqdevice_is_caller_privileged() in libhal.
+	check for libhal_device_is_caller_privileged() in libhal.
 
 2007-08-13  Danny Kukawka  <danny.kukawka@web.de>
 
@@ -707,17 +707,17 @@
 2007-06-13  Danny Kukawka  <danny.kukawka@web.de>
 
 	* src/hardware.cpp: Remove laptop_panel entry from the 
-	QDict<QString> udis if no tqdevice with laptop_panel found. This 
-	should prevent problems if the laptop panel tqdevice get removed
+	QDict<QString> udis if no device with laptop_panel found. This 
+	should prevent problems if the laptop panel device get removed
 	from HAL. 
 
 2007-06-13  Danny Kukawka  <danny.kukawka@web.de>
 
-	* src/hardware.cpp: Added code to react if a latop panel tqdevice 
-	get added/remove. Added also all tqdevice_type values to the 
+	* src/hardware.cpp: Added code to react if a latop panel device 
+	get added/remove. Added also all device_type values to the 
 	switch of the HAL_DEVICE case. 
 	Removed several *.latin1() calls due to new usage of kdDebug().
-	* src/hardware.h: Added new value to enum tqdevice_type for laptop
+	* src/hardware.h: Added new value to enum device_type for laptop
 	panels (for brightness).
 
 2007-06-13  Danny Kukawka  <danny.kukawka@web.de>
@@ -2546,7 +2546,7 @@
 	* src/hardware.[cpp,h]: Added some new functions to get access
 	to battery list and the primary battery collection.
 	Fixed bug in checkBrightness(), check always if the list of
-	tqdevices is not empty before use them. 
+	devices is not empty before use them. 
 	Fixed some minor bugs in debug messages
 
 2006-11-02  Danny Kukawka  <danny.kukawka@web.de>
@@ -2617,9 +2617,9 @@
 2006-10-25  Danny Kukawka  <danny.kukawka@web.de>
 
 	* src/hardware.[cpp,h]: Added new function to check if we should 
-	handle a special tqdevice (e.g. on a HAL_DEVICE::DeviceAdded 
-	event) and to get the type of the tqdevice (added a new enum 
-	tqdevice_type).
+	handle a special device (e.g. on a HAL_DEVICE::DeviceAdded 
+	event) and to get the type of the device (added a new enum 
+	device_type).
 	Added some new Q_SIGNALS for: HAL error handling, data changes and
 	if the sleep button was pressed.
 
@@ -2823,9 +2823,9 @@
 2006-10-19  Danny Kukawka  <danny.kukawka@web.de>
 
 	* src/hardware.[cpp,h]: fixed intialiseHWInfo() to use only
-	one QStringList for the tqdevices. Added new code to the func
+	one QStringList for the devices. Added new code to the func
 	to collect the battery UDIs. 
-	Added code to store the UDIs of all tqdevices we handle and
+	Added code to store the UDIs of all devices we handle and
 	want to monitor. This should allow us a finer grained filter
 	functions for HAL events.
 	* src/hardware_battery.[cpp,h]: Changed one constructor to
@@ -3004,7 +3004,7 @@
 
 	* src/dbusHAL.[cpp,h]: code comments
 	* src/hardware.[cpp,h]: addes some empty functions and a QDicr
-	for udis of tqdevices except batteries (e.g. AC, Lid, buttons ...)
+	for udis of devices except batteries (e.g. AC, Lid, buttons ...)
 	* src/pdaemon.cpp: added comments about the state of port code
 	and functions to class dbusHAL
 
@@ -3054,7 +3054,7 @@
 	* src/Makefile.am: added dbusHAL class to make
 	* src/dbusHAL.[cpp,h]: Changed name of the class to dbusHAL and 
 	added connection to HAL and code to hold LibHalContext. The class 
-	contains now mew functions to search for tqdevices and to get tqdevice 
+	contains now mew functions to search for devices and to get device 
 	information from HAL. Also added: new function to call 
 	org.freedesktop.Hal.Device.SystemPowerManagement methodes on HAL 
 	via DBUS. 
diff --git a/ChangeLog.package b/ChangeLog.package
index 4f6edf2..3be2a74 100644
--- a/ChangeLog.package
+++ b/ChangeLog.package
@@ -125,8 +125,8 @@ Tue Jul 24 15:54:27 CEST 2007 - dkukawka@suse.de
     section) to disable call SetPowerSave() on HAL.
   - Fixed Segmentation Fault from b.n.c bug #284622.
   - added arabic po-file from Youssef Chahibi <chahibi@gmail.com>
-  - fixed laptop panel/backlight tqdevice handling to react if a 
-    tqdevice get added/removed to/from HAL
+  - fixed laptop panel/backlight device handling to react if a 
+    device get added/removed to/from HAL
   - use now kdebug/kdDebug() functions to debug instead of own 
     macros, added --dbg-trace option to allow trace function entry
     and leave points.
diff --git a/configure.in.in b/configure.in.in
index 213e7a3..7cf2fb5 100644
--- a/configure.in.in
+++ b/configure.in.in
@@ -147,7 +147,7 @@ AC_DEFINE_UNQUOTED(DBUS_SYSTEM_BUS_SOCKET, ["$DBUS_SYSTEM_BUS_SOCKET"],
 
 #check for PolicyKit version
 LIBHAL_POLICYCHECK=no
-AC_CHECK_LIB([hal], [libhal_tqdevice_is_caller_privileged], [LIBHAL_POLICYCHECK=yes], [LIBHAL_POLICYCHECK=no])
+AC_CHECK_LIB([hal], [libhal_device_is_caller_privileged], [LIBHAL_POLICYCHECK=yes], [LIBHAL_POLICYCHECK=no])
 if test "x$LIBHAL_POLICYCHECK" = "xyes"; then
    AC_DEFINE([USE_LIBHAL_POLICYCHECK],1,[Set if should use libhal to check policy.])
 fi
diff --git a/src/blacklistedit_Dialog.ui b/src/blacklistedit_Dialog.ui
index 3e25290..557aea5 100644
--- a/src/blacklistedit_Dialog.ui
+++ b/src/blacklistedit_Dialog.ui
@@ -205,7 +205,7 @@
                     <property name="text">
                         <string></string>
                     </property>
-                    <property name="tqalignment">
+                    <property name="alignment">
                         <set>AlignBottom</set>
                     </property>
                 </widget>
diff --git a/src/configure_Dialog.ui b/src/configure_Dialog.ui
index 7c49fb1..98005da 100644
--- a/src/configure_Dialog.ui
+++ b/src/configure_Dialog.ui
@@ -530,7 +530,7 @@
                                     <property name="text">
                                         <string></string>
                                     </property>
-                                    <property name="tqalignment">
+                                    <property name="alignment">
                                         <set>WordBreak|AlignTop</set>
                                     </property>
                                 </widget>
@@ -637,7 +637,7 @@
                                     <property name="text">
                                         <string>after:</string>
                                     </property>
-                                    <property name="tqalignment">
+                                    <property name="alignment">
                                         <set>AlignCenter</set>
                                     </property>
                                     <property name="buddy" stdset="0">
@@ -861,7 +861,7 @@
                                     <property name="text">
                                         <string>after:</string>
                                     </property>
-                                    <property name="tqalignment">
+                                    <property name="alignment">
                                         <set>AlignCenter</set>
                                     </property>
                                     <property name="buddy" stdset="0">
@@ -1179,7 +1179,7 @@
                                     <property name="textFormat">
                                         <enum>RichText</enum>
                                     </property>
-                                    <property name="tqalignment">
+                                    <property name="alignment">
                                         <set>WordBreak|AlignTop</set>
                                     </property>
                                 </widget>
@@ -1471,7 +1471,7 @@
                                     <property name="textFormat">
                                         <enum>RichText</enum>
                                     </property>
-                                    <property name="tqalignment">
+                                    <property name="alignment">
                                         <set>WordBreak|AlignTop</set>
                                     </property>
                                 </widget>
@@ -1688,7 +1688,7 @@
                                     <property name="textFormat">
                                         <enum>RichText</enum>
                                     </property>
-                                    <property name="tqalignment">
+                                    <property name="alignment">
                                         <set>WordBreak|AlignTop</set>
                                     </property>
                                 </widget>
diff --git a/src/configuredialog.cpp b/src/configuredialog.cpp
index 2d49931..1ca5fea 100644
--- a/src/configuredialog.cpp
+++ b/src/configuredialog.cpp
@@ -1074,7 +1074,7 @@ void ConfigureDialog::pB_deleteScheme_clicked(){
 
 	if (pB_deleteScheme->isEnabled()) {
 		int answer = KMessageBox::questionYesNo( this, i18n("Do you really want to delete the "
-							         "%1 scheme?").tqarg(schemes[currentScheme]),
+							         "%1 scheme?").arg(schemes[currentScheme]),
 							 i18n("Confirm delete scheme"),
 							 i18n("Delete"), i18n("Cancel"));
 		if (answer == KMessageBox::Yes) {
diff --git a/src/countdown_Dialog.ui b/src/countdown_Dialog.ui
index 3e4c1ca..5531538 100644
--- a/src/countdown_Dialog.ui
+++ b/src/countdown_Dialog.ui
@@ -142,7 +142,7 @@
             <property name="textFormat">
                 <enum>AutoText</enum>
             </property>
-            <property name="tqalignment">
+            <property name="alignment">
                 <set>WordBreak|AlignVCenter</set>
             </property>
         </widget>
diff --git a/src/countdowndialog.cpp b/src/countdowndialog.cpp
index 6abaf90..f8d268d 100644
--- a/src/countdowndialog.cpp
+++ b/src/countdowndialog.cpp
@@ -114,7 +114,7 @@ bool countDownDialog::showDialog() {
 
 	if (!textLabel->text().isEmpty() && timeOut > 0) {
 		// init the progressbar
-		progressBar->setFormat(i18n("%1 seconds").tqarg(remaining));
+		progressBar->setFormat(i18n("%1 seconds").arg(remaining));
 		progressBar->setPercentageVisible(true);
 		progressBar->setProgress(100);
 		progressBar->setEnabled(true);
@@ -160,7 +160,7 @@ void countDownDialog::updateProgress() {
 		int setTo = (int)((100.0/(float)timeOut)*(float)remaining);
 		
 		// set the progressBar
-		progressBar->setFormat(i18n("%1 seconds").tqarg(remaining));
+		progressBar->setFormat(i18n("%1 seconds").arg(remaining));
 		progressBar->setPercentageVisible(true);
 		progressBar->setProgress(setTo);
 		progressBar->setEnabled(true);
diff --git a/src/dbusHAL.cpp b/src/dbusHAL.cpp
index 6983eb3..4bac9c8 100644
--- a/src/dbusHAL.cpp
+++ b/src/dbusHAL.cpp
@@ -1288,7 +1288,7 @@ filterFunction (DBusConnection *connection, DBusMessage *message, void */*data*/
 
 			if (dbus_message_get_args( message, &error, DBUS_TYPE_BOOLEAN, &active, DBUS_TYPE_INVALID )) {
 				((dbusHAL*) myInstance)->emitMsgReceived( CONSOLEKIT_SESSION_ACTIVE, 
-									  session, TQString("%1").tqarg((int)active));
+									  session, TQString("%1").arg((int)active));
 			} else {
 				if (dbus_error_is_set( &error )) dbus_error_free( &error );
 			}
diff --git a/src/detailed_Dialog.ui b/src/detailed_Dialog.ui
index b34b485..89f16f1 100644
--- a/src/detailed_Dialog.ui
+++ b/src/detailed_Dialog.ui
@@ -92,7 +92,7 @@
                                 <property name="text">
                                     <string></string>
                                 </property>
-                                <property name="tqalignment">
+                                <property name="alignment">
                                     <set>AlignTop|AlignRight</set>
                                 </property>
                             </widget>
@@ -111,7 +111,7 @@
                                 <property name="text">
                                     <string></string>
                                 </property>
-                                <property name="tqalignment">
+                                <property name="alignment">
                                     <set>AlignTop</set>
                                 </property>
                             </widget>
@@ -322,7 +322,7 @@
                                     <property name="text">
                                         <string>plugged in</string>
                                     </property>
-                                    <property name="tqalignment">
+                                    <property name="alignment">
                                         <set>AlignVCenter|AlignRight</set>
                                     </property>
                                 </widget>
@@ -351,7 +351,7 @@
                                     <property name="text">
                                         <string></string>
                                     </property>
-                                    <property name="tqalignment">
+                                    <property name="alignment">
                                         <set>AlignVCenter|AlignRight</set>
                                     </property>
                                 </widget>
diff --git a/src/detaileddialog.cpp b/src/detaileddialog.cpp
index 9f9b0a2..a8cc129 100644
--- a/src/detaileddialog.cpp
+++ b/src/detaileddialog.cpp
@@ -78,9 +78,9 @@ detaileddialog::detaileddialog( HardwareInfo *_hwinfo, TQPixmap *_pixmap, Settin
 			if ((primaryBatteries->getNumBatteries() > 1) && (i == 0))
 				Label->setText( i18n( "Total:" ));
 			else if ((primaryBatteries->getNumBatteries() > 1) && (i > 0))
-				Label->setText( i18n( "Battery %1" ).tqarg(i));
+				Label->setText( i18n( "Battery %1" ).arg(i));
 			else 
-				Label->setText( i18n( "Battery %1" ).tqarg(i + 1));
+				Label->setText( i18n( "Battery %1" ).arg(i + 1));
 	
 			BatteryGridLayout->addWidget( Label, i , 0);
 	
@@ -111,7 +111,7 @@ detaileddialog::detaileddialog( HardwareInfo *_hwinfo, TQPixmap *_pixmap, Settin
 
 	for (int i = 0; i < numOfCPUs; i++) {
 		TQLabel *Label = new TQLabel(ProcessorFrame, "ProcessorLabel");
-		Label->setText( i18n( "Processor %1" ).tqarg(i + 1));
+		Label->setText( i18n( "Processor %1" ).arg(i + 1));
 		ProcessorGridLayout->addWidget( Label, i , 0);
 
 		KProgress *CPUPBar = new KProgress(ProcessorFrame, "ProcessorPBar");
@@ -242,10 +242,10 @@ void detaileddialog::setBattery() {
 				// this should fix apm, where we have no time info if charging
 				BatteryPBar[i]->setFormat("%p% " + i18n("charged"));
 			} else if (_c_state == CHARGING) {
-				TQString temp = i18n("%1:%2 h until charged").tqarg(hours).tqarg(minutes);
+				TQString temp = i18n("%1:%2 h until charged").arg(hours).arg(minutes);
 				BatteryPBar[i]->setFormat(temp);
 			} else if (_c_state == DISCHARGING) {
-				TQString temp = i18n("%1:%2 h remaining").tqarg(hours).tqarg(minutes);
+				TQString temp = i18n("%1:%2 h remaining").arg(hours).arg(minutes);
 				BatteryPBar[i]->setFormat(temp);
 			
 			} else {
@@ -355,7 +355,7 @@ void detaileddialog::setProcessorThrottling() {
 		if (throttling && cpuInfo->cpufreq_speed[i] > 0 && cpuInfo->cpu_throttling[i] >= 0) {
 			// get max cpu freq and set it to the max of the progressbar
 			ProcessorPBar[i]->setTotalSteps(100);
-			TQString ProgressString = TQString("%1% (%2 MHz)").tqarg(100 - cpuInfo->cpu_throttling[i]).tqarg(cpuInfo->cpufreq_speed[i]);
+			TQString ProgressString = TQString("%1% (%2 MHz)").arg(100 - cpuInfo->cpu_throttling[i]).arg(cpuInfo->cpufreq_speed[i]);
 			ProcessorPBar[i]->setFormat(i18n(ProgressString.ascii()));
 			ProcessorPBar[i]->setProgress(100 - cpuInfo->cpu_throttling[i]);
 			ProcessorPBar[i]->setEnabled(true);
diff --git a/src/dummy.cpp b/src/dummy.cpp
index bd3f2f9..5f5b01f 100644
--- a/src/dummy.cpp
+++ b/src/dummy.cpp
@@ -57,20 +57,20 @@ class dummy {
 		dummy = i18n("activated");
 		dummy = i18n("deactivated");
 		dummy = i18n("do nothing");
-		dummy = i18n("Deactivate following tqdevices:");
-		dummy = i18n("Activate following tqdevices");
-		dummy = i18n("Reactivate following tqdevices");
-		dummy = i18n("Deactivate following tqdevice classes:");
-		dummy = i18n("Activate following tqdevices classes");
-		dummy = i18n("Reactivate following tqdevice classes");
-		dummy = i18n("If the scheme switched all tqdevices are again activated.");
+		dummy = i18n("Deactivate following devices:");
+		dummy = i18n("Activate following devices");
+		dummy = i18n("Reactivate following devices");
+		dummy = i18n("Deactivate following device classes:");
+		dummy = i18n("Activate following devices classes");
+		dummy = i18n("Reactivate following device classes");
+		dummy = i18n("If the scheme switched all devices are again activated.");
 		dummy = i18n("This is a experimental feature.");
 		dummy = i18n("If you have problems with this feature, please report them.");
-		dummy = i18n("Select one of the available tqdevices and click on ");
-		dummy = i18n("Select one of the available tqdevice classes and click on ");
-		dummy = i18n("Select one or more of the available tqdevices and click on ");
-		dummy = i18n("Select one or more of the available tqdevice classes and click on ");
-		dummy = i18n("Please note: If you e.g. deactivate a network tqdevice you may lose your "
+		dummy = i18n("Select one of the available devices and click on ");
+		dummy = i18n("Select one of the available device classes and click on ");
+		dummy = i18n("Select one or more of the available devices and click on ");
+		dummy = i18n("Select one or more of the available device classes and click on ");
+		dummy = i18n("Please note: If you e.g. deactivate a network device you may lose your "
 			     "internet connection.");
 		dummy = i18n("<b>Note:</b> If you select this option, the computer will suspend or standby "
 			     "if the current user is inactive for the defined time. <br><br> This feature "
@@ -92,11 +92,11 @@ class dummy {
 
 		// for kpowersave.cpp:
 		dummy = i18n("Cannot connect to D-Bus. The D-Bus daemon may not be running.");
-		dummy = i18n("Scheme switched to %1. \n Deactivate following tqdevices: %2").tqarg("").tqarg("");
-		dummy = i18n("Scheme switched to %1. \n Activate following tqdevices: %2").tqarg("").tqarg("");
+		dummy = i18n("Scheme switched to %1. \n Deactivate following devices: %2").arg("").arg("");
+		dummy = i18n("Scheme switched to %1. \n Activate following devices: %2").arg("").arg("");
 		dummy = i18n("Report ...");
 		dummy = i18n("Suspend to RAM is not supported on your machine.");
-		dummy = i18n("Additionally, please mail the output of %1 to %2 . Thanks!").tqarg("").tqarg("");
+		dummy = i18n("Additionally, please mail the output of %1 to %2 . Thanks!").arg("").arg("");
 		dummy = i18n("Power consumption");
 
 		// for screen.cpp
@@ -116,12 +116,12 @@ class dummy {
 		dummy = i18n("Session active:");
 
 		// for countdowndialog.cpp
-		dummy = i18n("The display get dimmed down to %1% in: ").tqarg(30);
+		dummy = i18n("The display get dimmed down to %1% in: ").arg(30);
 
 		// other ConsoleKit related stuff
-		dummy = i18n("Could not call %1. The current desktop session is not active.").tqarg("");
-		dummy = i18n("Could not set %1. The current desktop session is not active.").tqarg("");
-		dummy = i18n("Stopped %1. The current desktop session is now inactive.").tqarg("");
-		dummy = i18n("Restarted %1. The current desktop session is now active again.").tqarg("");
+		dummy = i18n("Could not call %1. The current desktop session is not active.").arg("");
+		dummy = i18n("Could not set %1. The current desktop session is not active.").arg("");
+		dummy = i18n("Stopped %1. The current desktop session is now inactive.").arg("");
+		dummy = i18n("Restarted %1. The current desktop session is now active again.").arg("");
 	}
 };
diff --git a/src/hardware.cpp b/src/hardware.cpp
index 2053180..ab65969 100644
--- a/src/hardware.cpp
+++ b/src/hardware.cpp
@@ -891,7 +891,7 @@ void HardwareInfo::checkLidcloseState() {
 		if (dbus_HAL->halGetPropertyBool(*udis["lidclose"] , "button.state.value", &_state )) {
 			if (_state != lidclose) {
 				lidclose = _state;
-				emit lidcloseStatus( lidclose );
+				emit lidclosetStatus( lidclose );
 			}
 		} else {
 			lidclose = false;
diff --git a/src/hardware.h b/src/hardware.h
index b3864b8..9df2ce5 100644
--- a/src/hardware.h
+++ b/src/hardware.h
@@ -364,7 +364,7 @@ signals:
 	//! signal the AC adapter
 	void ACStatus( bool );
 	//! signal for the lidclose button
-	void lidcloseStatus ( bool );
+	void lidclosetStatus ( bool );
 	//! signal for pressed the power button
 	void powerButtonPressed ();
 	//! signal for pressed sleep (suspend2ram) button
diff --git a/src/info_Dialog.ui b/src/info_Dialog.ui
index ea2fa91..1b95e5e 100644
--- a/src/info_Dialog.ui
+++ b/src/info_Dialog.ui
@@ -106,7 +106,7 @@
             <property name="text">
                 <string></string>
             </property>
-            <property name="tqalignment">
+            <property name="alignment">
                 <set>WordBreak|AlignTop</set>
             </property>
         </widget>
diff --git a/src/kpowersave.cpp b/src/kpowersave.cpp
index 5afd915..b1c3a35 100644
--- a/src/kpowersave.cpp
+++ b/src/kpowersave.cpp
@@ -106,7 +106,7 @@ kpowersave::kpowersave( bool force_acpi_check, bool trace_func ) : KSystemTray(0
 	connect(hwinfo, TQT_SIGNAL(dbusRunning(int)), this, TQT_SLOT(showDBusErrorMsg(int)));
 
 	// connect to events
-	connect(hwinfo, TQT_SIGNAL(lidcloseStatus(bool)), this, TQT_SLOT(handleLidEvent(bool)));
+	connect(hwinfo, TQT_SIGNAL(lidclosetStatus(bool)), this, TQT_SLOT(handleLidEvent(bool)));
 	connect(hwinfo, TQT_SIGNAL(powerButtonPressed()), this, TQT_SLOT (handlePowerButtonEvent()));
 	connect(hwinfo, TQT_SIGNAL(sleepButtonPressed()), this, TQT_SLOT (handleSleepButtonEvent()));
 	connect(hwinfo, TQT_SIGNAL(s2diskButtonPressed()), this, TQT_SLOT (handleS2DiskButtonEvent()));
@@ -474,26 +474,26 @@ void kpowersave::updateTooltip(){
 			else if (minutes > 0){
 				if (charging_state == CHARGING)
 					tmp = i18n("Plugged in -- %1% charged (%2:%3 h until full "
-						   "charged)").tqarg(percent).tqarg(minutes / 60).tqarg(num3);
+						   "charged)").arg(percent).arg(minutes / 60).arg(num3);
 				else
 					tmp = i18n("Plugged in -- %1% charged (%2:%3 remaining hours)")
-						   .tqarg(percent).tqarg(minutes / 60).tqarg(num3);
+						   .arg(percent).arg(minutes / 60).arg(num3);
 			}
 			else if (charging_state == CHARGING && hwinfo->hasAPM()) {
-				tmp = i18n("Plugged in -- %1% charged").tqarg(percent);
+				tmp = i18n("Plugged in -- %1% charged").arg(percent);
 			}
 			else{
 				if (percent == -1) tmp = i18n("Plugged in -- no battery");
-				else tmp = i18n("Plugged in -- %1% charged").tqarg(percent);
+				else tmp = i18n("Plugged in -- %1% charged").arg(percent);
 			}
 		}
 	} else{
 		if (minutes >= 0){
 			tmp = i18n("Running on batteries -- %1% charged (%2:%3 hours remaining)")
-				   .tqarg(percent).tqarg(minutes / 60).tqarg(num3);
+				   .arg(percent).arg(minutes / 60).arg(num3);
 		}
 		else {
-			tmp = i18n("Running on batteries -- %1% charged").tqarg(percent);
+			tmp = i18n("Running on batteries -- %1% charged").arg(percent);
 		}
 	}
 	// add string whether battery is charging, but only if < 100% to avoid
@@ -873,7 +873,7 @@ void kpowersave::do_autosuspendWarn() {
 			// TODO: rework this after translation round for openSUSE 10.3 !
 			message = i18n("Inactivity detected.") + " " +
 				  i18n("To stop the %1 press the 'Cancel' button before the countdown "
-				       "expire.").tqarg(i18n("Autosuspend")) + "\n\n" +
+				       "expire.").arg(i18n("Autosuspend")) + "\n\n" +
 				  i18n("The computer autosuspend in: ");
 
 			countdown->setMessageText(message);
@@ -1104,13 +1104,13 @@ bool kpowersave::handleMounts( bool suspend ) {
 		_msg = 	"<qt>" +
 			i18n("Could not umount external media before suspend/standby. \n "
 			    "(Reason: %1)\n \n Would you like to continue suspend/standby "
-			    "anyway? \n(Warning: Continue suspend can cause data loss!)").tqarg(_e_msg) +
+			    "anyway? \n(Warning: Continue suspend can cause data loss!)").arg(_e_msg) +
 			"</qt>";
 
 		_suspend = getSuspendString(calledSuspend);
 
 		int answer = KMessageBox::questionYesNo( 0, _msg,
-							 i18n("Error while prepare %1").tqarg(_suspend),
+							 i18n("Error while prepare %1").arg(_suspend),
 							 i18n("Suspend anyway"), i18n("Cancel suspend"),
 							 "ignoreMountOnSuspend");
 
@@ -1306,7 +1306,7 @@ void kpowersave::do_setSpeedPolicy(int menu_id){
 
 	if(!hwinfo->setCPUFreq((cpufreq_type)menu_id, settings->cpuFreqDynamicPerformance)) {
 		KPassivePopup::message(i18n("WARNING"),
-				 i18n("CPU Freq Policy %1 could not be set.").tqarg(speed_menu->text(menu_id)),
+				 i18n("CPU Freq Policy %1 could not be set.").arg(speed_menu->text(menu_id)),
 				 SmallIcon("messagebox_warning", 20), this, i18n("Warning").ascii(), 10000);
 	} else {
 		hwinfo->checkCurrentCPUFreqPolicy();
@@ -1335,7 +1335,7 @@ void kpowersave::do_setActiveScheme( int i ){
 		notifySchemeSwitch();
  	} else if (!settings->schemes[i]){
 		KPassivePopup::message( i18n("WARNING"),
-					i18n("Scheme %1 could not be activated.").tqarg(scheme_menu->text(i)),
+					i18n("Scheme %1 could not be activated.").arg(scheme_menu->text(i)),
 					SmallIcon("messagebox_warning", 20), this, i18n("Warning").ascii(), 5000);
 	}
 
@@ -1990,7 +1990,7 @@ void kpowersave::notifyBatteryStatusChange ( int type, int state ) {
 			if (!settings->disableNotifications)
 				KNotifyClient::event(this->winId(), "battery_warning_event",
 						     i18n("Battery state changed to WARNING -- remaining time: "
-						     "%1 hours and %2 minutes.").tqarg(min/60).tqarg(min%60));
+						     "%1 hours and %2 minutes.").arg(min/60).arg(min%60));
 			// set/call related actions
 			handleActionCall(settings->batteryWarningLevelAction,
 					 settings->batteryWarningLevelActionValue);
@@ -1999,7 +1999,7 @@ void kpowersave::notifyBatteryStatusChange ( int type, int state ) {
 			if (!settings->disableNotifications)
 				KNotifyClient::event(this->winId(), "battery_low_event",
 				i18n("Battery state changed to LOW -- remaining time: "
-						     "%1 hours and %2 minutes.").tqarg(min/60).tqarg(min%60));
+						     "%1 hours and %2 minutes.").arg(min/60).arg(min%60));
 			// set/call related actions
 			handleActionCall(settings->batteryLowLevelAction,
 					 settings->batteryLowLevelActionValue);
@@ -2014,7 +2014,7 @@ void kpowersave::notifyBatteryStatusChange ( int type, int state ) {
 								  "Shut down your system or plug in the power "
 								  "cable immediately. Otherwise the machine\n"
 								  "will go shutdown in 30 seconds")
-								.tqarg(min/ 60).tqarg(min%60));
+								.arg(min/ 60).arg(min%60));
 
 				TQTimer::singleShot(30000, this, TQT_SLOT(handleCriticalBatteryActionCall()));
 			} else {
@@ -2024,7 +2024,7 @@ void kpowersave::notifyBatteryStatusChange ( int type, int state ) {
 								  "remaining time: %1 hours and %2 minutes.\n"
 								  "Shut down your system or plug in the power "
 								  "cable immediately.")
-								.tqarg(min/ 60).tqarg(min%60));
+								.arg(min/ 60).arg(min%60));
 
 				handleActionCall(settings->batteryCriticalLevelAction,
 						 settings->batteryCriticalLevelActionValue);
@@ -2181,7 +2181,7 @@ void kpowersave::notifySchemeSwitch() {
 			eventType = "scheme_" + _scheme;
 
 		KNotifyClient::event( this->winId(), eventType,
-				      i18n("Switched to scheme: %1").tqarg(i18n(_scheme.ascii())).ascii());
+				      i18n("Switched to scheme: %1").arg(i18n(_scheme.ascii())).ascii());
 	}
 
 	kdDebugFuncOut(trace);
@@ -2258,17 +2258,17 @@ void kpowersave::handleResumeSignal() {
 		switch (calledSuspend) {
 			case SUSPEND2DISK:
 				KNotifyClient::event( this->winId(), "resume_from_suspend2disk_event",
-						      i18n("System is resumed from %1.").tqarg(
+						      i18n("System is resumed from %1.").arg(
 						      i18n("Suspend to Disk")));
 				break;
 			case SUSPEND2RAM:
 				KNotifyClient::event( this->winId(), "resume_from_suspend2ram_event",
-					      	      i18n("System is resumed from %1.").tqarg(
+					      	      i18n("System is resumed from %1.").arg(
 						      i18n("Suspend to RAM")));
 				break;
 			case STANDBY:
 				KNotifyClient::event( this->winId(), "resume_from_standby_event",
-						      i18n("System is resumed from %1.").tqarg(
+						      i18n("System is resumed from %1.").arg(
 						      i18n("Standby")));
 				break;
 			default:
@@ -2297,7 +2297,7 @@ void kpowersave::handleResumeSignal() {
 		TQString msg;
 
 		msg = i18n("An unknown error occurred while %1. The errorcode is: '%2'").
-			tqarg(getSuspendString(calledSuspend)).tqarg(resume_result);
+			arg(getSuspendString(calledSuspend)).arg(resume_result);
 
 #if defined(DISTRO_IS_SUSE) || defined(DISTRO_IS_SLES_SLED) || defined(DISTRO_IS_PARDUS)
 		// okay we know this system use pm-utils and log is under /var/log/pm-suspend.log
@@ -2328,7 +2328,7 @@ void kpowersave::handleResumeSignal() {
  #endif
 		}
 #else
-		KMessageBox::error(0, msg, i18n("Error while %1").tqarg(getSuspendString(calledSuspend)));
+		KMessageBox::error(0, msg, i18n("Error while %1").arg(getSuspendString(calledSuspend)));
 #endif
 	}
 	// set back ... suspend is handled
diff --git a/src/kpowersave.h b/src/kpowersave.h
index 62a22eb..af0d49c 100644
--- a/src/kpowersave.h
+++ b/src/kpowersave.h
@@ -390,7 +390,7 @@ private slots:
 	//! set for a battery status the related actions
 	void handleActionCall ( action action, int value, bool checkAC = false, bool batWarnCall = false );
 
-	//! this lock/reactivate the screen if a lidcloseStatus() signal is triggered
+	//! this lock/reactivate the screen if a lidclosetStatus() signal is triggered
 	void handleLidEvent( bool closed );
 	//! show the login dialog after locked the screen
 	void activateLoginScreen();
diff --git a/src/logviewer.cpp b/src/logviewer.cpp
index f63e797..b3083ce 100644
--- a/src/logviewer.cpp
+++ b/src/logviewer.cpp
@@ -41,7 +41,7 @@
 LogViewer::LogViewer( TQString filename, TQWidget *parent, const char *name)
 		      :log_viewer(parent, name, false, WDestructiveClose ) {
 
-	this->setCaption(i18n("KPowersave Logfile Viewer: %1").tqarg(filename));
+	this->setCaption(i18n("KPowersave Logfile Viewer: %1").arg(filename));
 	
 	if (!TQFile::exists ( filename ))
 		return;