path: root/ChangeLog

2006-05-15  Steven Carr <scarr@jsa-usa.com>
	* Default to RFB 3.8
	* Add command line options:
	  -rfbversion X.Y      Sets the version thatthe server reports
	  -permitfiletransfer  Permits File Transfer (Default is Deny)

2006-05-15  Steven Carr <scarr@jsa-usa.com>
	* The great UltraVNC Compatibility Commit!
	  libvncserver now supports the following messages:
	   SetSingleWindow - Select a single window to be the source of the
	                     framebuffer.
	   ServerInput     - Disable and blank the servers display
	   TextChat        - TextChat between the remote/local user
	                     (Bandwidth friendly VS the Notepad approach)
	   FileTransfer    - Emulates a Windows Filesystem to the viewer
	                     (Currently does not support Delta Transfers)
	                     (Currently does not support Sending Directories)
	   UltraZip        - Improved UltraZip support
	* Improved Statistics SubSystem, now supports all encodings
	* RFB 3.8 support!   Error Messages are a 'Good Thing' (tm)
	* Default to identify as RFB 3.6 to emulate UltraVNC server
	  (Server now has the ability to set the RFB version reported)
	  (permits the viewer to identify the server has FileTransfer ability)
	* Client Encoding AutoSelection Supported (UltraViewer is speed aware)
	* libvncclient has improved server detection/capabilities logic!

2006-05-13  Karl Runge <runge@karlrunge.com>
	* minilzo.c,minilzo.h,lzoconf.h: switch to non-CRLF versions.
	* libvncclient/Makefile.am: add minilzo.c, minilzo.h, lzoconf.h
	  and ultra.c to materials lists.
	* libvncserver/scale.c: remove libm dependency with CEIL and
	  FLOOR macros.
	* libvncserver/rfbserver.c: remove C99 declarations.
	* vncterm/Makefile.am: fix VPATH build.

2006-05-06  Karl Runge <runge@karlrunge.com>
	* configure.ac: add linux/videodev.h and linux/fb.h detection.

2006-05-04  Steven Carr <scarr@jsa-usa.com>
	* rfbEncodingSupportedEncodings - What encodings are supported?
	* rfbEncodingSupportedMessages - What message types are supported?
	  This way a client can identify if a particular server supports a
	  specific message types.
	* rfbEncodingServerIdentity - What is the servers version string?
	  ie: "x11vnc: 0.8.1 lastmod: 2006-04-25 (LibVNCServer 0.9pre)"

2006-05-03  Steven Carr <scarr@jsa-usa.com>
	* Server Side Scaling is now supported in libvncserver
	  Both PalmVNC and UltraVNC SetScale messages are supported

2006-05-02  Steven Carr <scarr@jsa-usa.com>
	* Ultra Encoding added.  Tested against UltraVNC V1.01
	* libvncclient/rfbproto.c  CopyRectangle() BPP!=8 bug fixed.
	* Incompatible pointer usage warnings eliminated (gcc 4.0.1)

2006-04-27  Johannes E. Schindelin  <Johannes.Schindelin@gmx.de>
	* examples/{rotate.c, rotatetemplate.c}: add modified pnmshow
	  which demonstrates fast rotating and flipping.

2006-04-26  Karl Runge <runge@karlrunge.com>
	* all Makefile.am: use -I $(top_srcdir) instead of -I .. so VPATH
	  builds will work.
	* configure.ac: create rfb subdir for rfbint.h under VPATH. 

2006-04-17 Steven Carr <scarr@jsa-usa.com>
	* Added an example camera application to demonstrate another
	  way to write a server application.

2006-04-05  Karl Runge <runge@karlrunge.com>
	* classes/ssl: SSL Java viewer workarounds for firewall
	  proxies (signed applet as last resort, proxy.vnc).
	  include ssl_vncviewer stunnel wrapper script.

2006-03-28  Steven Carr <scarr@jsa-usa.com>
	* SDLvncviewer.c, rfbproto.c, vncviewer.c, main.c, rfbserver.c,
	  rfb.h, rfbclient.h, rfbproto.h: add new encoding: KeyboardLedState

2006-03-28  Karl Runge <runge@karlrunge.com>
	* classes/ssl: patch to tightvnc Java viewer for SSL support
	  plus other fixes (richcursor colors, Tab keysym, etc).
	* libvncserver/httpd.c: add missing \r in 200 OK.

2006-03-27  Steven Carr <scarr@jsa-usa.com>
	* rfbserver.c: Zlib encoding cannot have a limit via
	  maxRectsPerUpdate

2006-02-28  Donald Dugger <donald.d.dugger@intel.com>
	* rfb.h, sockets.c, main.c: add a flag to handle all pending
	  input events instead of one at a time.

2006-02-24  Karl Runge <runge@karlrunge.com>
	* x11vnc: -unixpw and -stunnel options.  Add clipboard input
	  to per-client input controls.

2006-02-24  Rohit Kumar <rokumar@novell.com>
	* main.c, rfbtightserver.c, rfb.h: added method to get 
	  extension specific client data.

2006-02-22  Rohit Kumar <rokumar@novell.com>
	* auth.c, main.c, rfbtightserver.c, rfb.h: add methods to
	  unregister extensions and security types.

2006-02-20  Karl Runge <runge@karlrunge.com>
	* main.c, cursor.c, tightvnc-filetransfer: fix some non-gcc
	  compiler warnings.

2006-01-14  Karl Runge <runge@karlrunge.com>
	* x11vnc: add -8to24 option for some multi-depth displays.

2006-01-12  Karl Runge <runge@karlrunge.com>
	* configure.ac: add switches for most X extensions.

2006-01-10  Johannes E. Schindelin  <Johannes.Schindelin@gmx.de>
	* libvncserver/{main.c,rfbserver.c}: fix timely closing of clients;
	  the client iterator in rfbProcessEvents() has to iterate also
	  over clients whose sock < 0. Noticed by Karl.

2006-01-08  Karl Runge <runge@karlrunge.com>
	* x11vnc: the big split. (and -afteraccept and -passwdfile read:..)
	* examples/pnmshow24.c: fix typo.

2006-01-08  Karl Runge <runge@karlrunge.com>
	* libvncclient/vncviewer.c: fix non-jpeg/libz builds.
	* examples/pnmshow24.c: fix non-ALLOW24BPP builds.
	* libvncserver/main.c: fix 'static int' defn.

2006-01-05  Karl Runge <runge@karlrunge.com>
	* libvncserver/main.c: rfbRegisterProtocolExtension extMutex was
	  never initialized.

2005-12-24  Karl Runge <runge@karlrunge.com>
	* x11vnc: enhance -passwdfile features, filetransfer on by default.

2005-12-19  Dave Stuart <dave@justdave.us>
	* libvncserver/{main.c,rfbserver.c,cargs.c}, rfb/rfb.h: introduce
	  deferPtrUpdateTime, which defers the handling of pointer events
	  for a couple of milliseconds.

2005-12-19  Johannes E. Schindelin  <Johannes.Schindelin@gmx.de>
	* client_examples/SDLvncviewer.c, libvncclient/{sockets.c,vncviewer.c},
	  libvncserver/{main.c,rfbserver.c,sockets.c}: fix MinGW32 compilation

2005-12-08  "Mazin, Malvina" <Malvina.Mazin@kla-tencor.com>
	* configure.ac, libvncserver/sockets.c: on Solaris 2.7, write may
	  return ENOENT when it really means EAGAIN.

2005-12-07  Giampiero Giancipoli <giampiero.giancipoli@fredreggiane.com>
	* libvncclient/vncviewer.c: plug memory leaks

2005-12-07  Johannes E. Schindelin  <Johannes.Schindelin@gmx.de>
	* client_examples/SDLvncviewer.c: use unicode to determine the keysym
	  (much more reliable than the old method)

2005-11-25  Karl Runge <runge@karlrunge.com>
	* configure.ac: disable tightvnc-filetransfer if no libpthread.
	  add --without-pthread option.
	* libvncserver/Makefile.am: enable WITH_TIGHTVNC_FILETRANSFER
	  conditional.
	* libvncserver/rfbserver.c: fix deadlock from
	  rfbReleaseExtensionIterator(), fix no libz/libjpeg builds.
	* libvncserver/{main.c,private.h}, rfb/rfbclient.h, libvncclient/{rfbproto.c,
	  tight.c,vncviewer.c}: fix no libz/libjpeg builds.
	* libvncserver/tightvnc-filetransfer/rfbtightserver.c: fix no
	  libz/libjpeg builds.  rm // comments.
	* libvncserver/tightvnc-filetransfer/filetransfermsg{.c,.h},
	  libvncserver/auth.c: rm // comments.
	* libvncserver/tightvnc-filetransfer/filelistinfo.h: set NAME_MAX if not
	  defined.
	* x11vnc: throttle load if fb update requests not taking place.

2005-10-22  Karl Runge <runge@karlrunge.com>
	* x11vnc: -filexfer file transfer, -slow_fb, -blackout noptr...

2005-10-06  Johannes E. Schindelin  <Johannes.Schindelin@gmx.de>
	* many a files: kill BackChannel and CustomClientMessage
	  support. The new extension mechanism is much more versatile.
	  To prove this, a new example shows how to implement the back
	  channel as an extension. Of course, this had to be tested, so
	  LibVNCClient now has beginnings of an extension mechanism, too.
	  And an example implementing the client side of the back channel.

2005-10-03  Johannes E. Schindelin  <Johannes.Schindelin@gmx.de>
	* libvncserver/rfbserver.c, rfb/rfb.h: add a method to the
	  extension struct which is called to enable pseudo encodings.
	  This is a versatile mechanism to enable/disable custom
	  extensions with custom clients and servers.

2005-09-28  Rohit Kumar <rokumar@novell.com>
	* examples/filetransfer.c, rfb/rfb.h, configure.ac,
	  libvncserver/{auth,cargs,main,rfbserver,sockets}.c,
	  libvncserver/tightvnc-extension/*:
	  Implement TightVNC's file transfer protocol.

2005-09-27  Rohit Kumar <rokumar@novell.com>
	* libvncserver/{cargs,sockets,main,rfbserver}.c,
	  rfb/rfb.h: Provide a generic means to extend the RFB
	  protocol: rfbRegisterProtocolExtension(extension). This
	  deprecates the current (very limited) option to override
	  rfbScreenInfoPtr->processCustomClientMessage(client).

2005-09-26  Rohit Kumar <rokumar@novell.com>
	* libvncserver/{auth,main,rfbserver}.c, rfb/{rfb,rfbproto}.h:
	  support VNC protocol version 3.7. This allows to add security
	  types.

2005-08-21  Alberto Lusiani <alusiani@gmail.com>
	* libvncserver.spec.in: split rpm into libvncserver, -devel and x11vnc

2005-07-12  Karl Runge <runge@karlrunge.com>
	* x11vnc: tweaks for release, fix queue buildup under -viewonly

2005-07-10  Karl Runge <runge@karlrunge.com>
	* x11vnc: -grab_buster for breaking XGrabServer deadlock, fix
	  scrolls and copyrect for -clip and -id cases.

2005-07-06  Karl Runge <runge@karlrunge.com>
	* x11vnc: -gui tray now embeds in systray; more improvements to gui.

2005-07-01  Karl Runge <runge@karlrunge.com>
	* libvncserver/httpd.c: make sure httpListenSock >=0 in rfbHttpCheckFds
	* x11vnc: add simple "-gui tray" mode for small icon like x0rfbserver
	  had (someday/somehow to auto embed in a tray/dock)

2005-06-28  Johannes E. Schindelin  <Johannes.Schindelin@gmx.de>
	* libvncclient/zrle.c: fix handling of raw and fill subtypes
	  (off-by-one and off-by-many bug)

2005-06-27  Karl Runge <runge@karlrunge.com>
	* libvncserver/main.c: move deferUpdateTime and maxRectsPerUpdate
	  defaults to before rfbProcessArguments().

2005-06-18  Karl Runge <runge@karlrunge.com>
	* configure.ac: don't use -R on HP-UX and OSF1.
	* x11vnc: don't free the current cursor, close stderr
	  for -inetd -q and no -o logfile, set DISPLAY for -solid
	  external calls.

2005-06-14  Karl Runge <runge@karlrunge.com>
	* configure.ac: XReadScreen and XReadDisplay checks.
	* libvncserver/cursor.c: fix unsigned long crash for 64bits.
	* x11vnc: first round of beta-testing fixes, RFE's.

2005-06-10  Johannes E. Schindelin  <Johannes.Schindelin@gmx.de>
	* configure.ac: fix that annoying SUN /usr/ccs location of "ar"

2005-06-03  Karl Runge <runge@karlrunge.com>
	* libvncserver/main.c: remove sraRgnSubtract from copyRegion
	* x11vnc: scrollcopyrect under -scale, add -fixscreen.

2005-05-30  Karl Runge <runge@karlrunge.com>
	* libvncserver/main.c: fix copyRect for non-cursor-shape-aware clients.

2005-05-24  Karl Runge <runge@karlrunge.com>
	* x11vnc: scrollcopyrect: GrabServer detection, autorepeat throttling..
	* prepare_x11vnc_dist.sh: grep out new libvncserver-config line.

2005-05-23  Karl Runge <runge@karlrunge.com>
	* configure.ac: malloc(0) is never used, so we don't need the check

2005-05-15  Johannes E. Schindelin  <Johannes.Schindelin@gmx.de>
	* acinclude.m4: fix compilation for systems without socklen_t

2005-05-17  Karl Runge <runge@karlrunge.com>
	* x11vnc: more scrolling, -scr_term, -wait_ui, -nowait_bog

2005-05-15  Johannes E. Schindelin  <Johannes.Schindelin@gmx.de>
	* almost every file: ANSIfy, fix warnings from Linus' sparse

2005-05-14  Karl Runge <runge@karlrunge.com>
	* x11vnc: more work on -scrollcopyrect and -xkb modes.

2005-05-13  Johannes E. Schindelin  <Johannes.Schindelin@gmx.de>
	* libvncserver/{main,rfbserver,sockets}.c: fix memory leaks (valgrind)

2005-05-07  Johannes E. Schindelin  <Johannes.Schindelin@gmx.de>
	* libvncserver/rfbserver.c: fix memory leak pointed out by Tim Jansen
	* libvncserver/{httpd,main,rfbserver,sockets}.c, rfb/rfb.h:
	  replace "rfbBool socketInitDone" by "enum rfbSocketState
	  socketState"

2005-05-03  Karl Runge <runge@karlrunge.com>
	* libvncserver/main.c: fix leak in rfbDoCopyRect/rfbScheduleCopyRect
	* configure.ac: guard against empty HAVE_X

2005-05-02  Karl Runge <runge@karlrunge.com>
	* configure.ac: fatal error for x11vnc package if no X present
	* configure.ac: give warnings and info about missing libjpeg/libz
	* x11vnc: X RECORD heuristics to detect scrolls: -scrollcopyrect,
	  build customizations, bandwidth/latency estimates.

2005-04-27  Johannes E. Schindelin  <Johannes.Schindelin@gmx.de>
	* clear requested region (long standing TODO, pointed out by Karl)

2005-04-19  Karl Runge <runge@karlrunge.com>
	* x11vnc: -wireframe, -wirecopyrect.  Back to the 90's with
	  wireframes to avoid window move/resize lurching.
	* safer remote control defaults. -privremote, -safer, -nocmds.
	* debug_xevents, debug_xdamage. -noviewonly for rawfb mode.

2005-04-10  Karl Runge <runge@karlrunge.com>
	* configure.ac: add mmap
	* x11vnc: -rawfb, -pipeinput, -xtrap, -flag, ...

2005-04-03  Karl Runge <runge@karlrunge.com>
	* configure.ac: add conditional libXTrap checking
	* x11vnc: use DEC-XTRAP on old X11R5 for grab control.
	  -shiftcmap n, -http, fix DAMAGE event leak.

2005-03-29  Karl Runge <runge@karlrunge.com>
	* x11vnc: fix event leaks, build-time customizations, -nolookup

2005-03-19  Karl Runge <runge@karlrunge.com>
	* x11vnc: scale cursors by default, -scale_cursor to tune,
	  -arrow n, -norepeat n, speed up integer magnification. 

2005-03-12  Karl Runge <runge@karlrunge.com>
	* x11vnc: X DAMAGE support, -clip WxH+X+Y, identd.

2005-03-05  Karl Runge <runge@karlrunge.com>
	* autoconf: rpm -> rpmbuild and echo -n -> printf

2005-03-04  Karl Runge <runge@karlrunge.com>
	* libvncserver/{cargs.c,sockets.c}: add -listen option and
	  rfbScreen member listenInterface.
	* rfb/rfb.h: rfbListenOnTCPPort() and rfbListenOnUDPPort()
	  function prototypes changed to include network interface.

2005-02-14  Karl Runge <runge@karlrunge.com>
	* x11vnc: -users lurk=, -solid for cde, -gui ez,.. beginner mode.

2005-02-10  Karl Runge <runge@karlrunge.com>
	* x11vnc: -input option to fine tune allowed client input,
	  additions to remote control and gui for this.

2005-02-09  Karl Runge <runge@karlrunge.com>
	* x11vnc: -users, fix -solid on gnome and kde.
	* configure.ac: add pwd.h, wait.h, and utmpx.h checks.

2005-02-06  Karl Runge <runge@karlrunge.com>
	* configure.ac: add /usr/sfw on Solaris when XFIXES, add
	  --with-jpeg=DIR --with-zlib=DIR, workaround bug when
	  --without-jpeg was supplied.
	* prepare_x11vnc_dist.sh: few tweaks for next release

2005-02-05  Karl Runge <runge@karlrunge.com>
	* x11vnc: -solid color, -opts/-?
	* tightvnc-1.3dev5-vncviewer-alpha-cursor.patch: create, name
	  says it all.

2005-01-23  Karl Runge <runge@karlrunge.com>
	* x11vnc: -timeout, -noalphablend.  make -R norepeat work.
	* sync with new draw cursor mechanism.

2005-01-20  Karl Runge <runge@karlrunge.com>
	* libvncserver/{cursor.c,rfbserver.c}: fixed the "disappearing cursor"
	  problem

2005-01-18  Johannes E. Schindelin  <Johannes.Schindelin@gmx.de>
	* rfb/rfb.h libvncserver/rfbserver.c: pointerClient was still static
	* libvncserver/rfbserver.c: do not make requestedRegion empty without
	  reason.
	* almost everything: the cursor handling for clients which don't handle
	  CursorShape updates was completely broken. It originally was very
	  complicated for performance reasons, however, in most cases it made
	  performance even worse, because at idle times there was way too much
	  checking going on, and furthermore, sometimes unnecessary updates
	  were inevitable.
	  The code now is much more elegant: the ClientRec structure knows
	  exactly where it last painted the cursor, and the ScreenInfo
	  structure knows where the cursor shall be.
	  As a consequence there is no more rfbDrawCursor()/rfbUndrawCursor(),
	  no more dontSendFramebufferUpdate, and no more isCursorDrawn.
	  It is now possible to have clients which understand CursorShape
	  updates and clients which don't at the same time.
	* libvncserver/cursor.c: rfbSetCursor no longer has the option
	  freeOld; this is obsolete, as the cursor structure knows what
	  to free and what not.

2005-01-15  Karl Runge <runge@karlrunge.com>
	* rfb/rfb.h: add alphaSource and alphaPreMultiplied to rfbCursor. 
	* libvncserver/cursor.c: do cursor alpha blending in rfbDrawCursor()
	  for non-cursorshapeupdates clients.
	* x11vnc: -alphablend, cursors fixes, -snapfb, more tweaks and bug
	  fixes.

2004-12-27  Karl Runge <runge@karlrunge.com>
	* x11vnc: improve alpha channel handling for XFIXES cursors. 
	* add more parameters to remote control.

2004-12-20  Johannes E. Schindelin  <Johannes.Schindelin@gmx.de>
	* released version 0.7

2004-12-19  Karl Runge <runge@karlrunge.com>
	* x11vnc: string cleanup, synchronous remote-control option -sync
	* libvncserver/cursor.c: zero underCursorBufferLen when cursor freed.

2004-12-16  Karl Runge <runge@karlrunge.com>
	* test/encodingstest.c: fix decl bug in main()
	* x11vnc: use XFIXES extension to show the exact cursor shape.
	* remote control nearly everything on the fly, -remote/-query 
	* tcl/tk gui based on the remote control, -gui
	* support screen size changes with XRANDR ext., -xrandr, -padgeom
	* Misc: -overlay visual support on IRIX, -id pick, -pointer_mode n,
	  -sb n, RFB_MODE set in env. under -accept/-gone.

2004-12-02  Johannes E. Schindelin  <Johannes.Schindelin@gmx.de>
	* make LibVNCServer compile & work on MinGW32

2004-11-30  "Leiradella, Andre V Matos Da Cunha" <ANDRE.LEIRADELLA@bra.xerox.com>
	* libvncclient/sockets.c: return TRUE in every case of success

2004-08-29  Karl Runge <runge@karlrunge.com>
	* x11vnc: yet another pointer input handling algorithm in
	  check_user_input(), revert to previous with -old_pointer2.
	* modifiy prepare_x11vnc_dist.sh to install tightvnc Java viewer
	  in $prefix/share/x11vnc/classes

2004-08-29  Johannes E. Schindelin  <Johannes.Schindelin@gmx.de>
	* */*.[ch]: API changes: global functions/structures should have
	*   either "rfb", "sra" or "zrle" as prefix, while structure members
	*   should not...

2004-08-29  Karl Runge <runge@karlrunge.com>
	* x11vnc: changes in cursor shape handling: use rfbSetCursor()
	* cursor shape options: -cursor, -cursor (X|some|most)
	* -vncconnect the default. 
	* configure.ac: add more macros for X extensions.

2004-08-15  Karl Runge <runge@karlrunge.com>
	* x11vnc: -overlay to fix colors with Sun 8+24 overlay visuals.
	* -sid option.

2004-08-03  Karl Runge <runge@karlrunge.com>
	* x11vnc: manpage and README
	* fix XKBlib.h detection on *BSD

2004-07-31  Karl Runge <runge@karlrunge.com>
	* x11vnc: -cursorpos now the default

2004-07-28  Karl Runge <runge@karlrunge.com>
	* x11vnc: -add_keysyms dynamically add missing keysyms to X server

2004-07-26  Karl Runge <runge@karlrunge.com>
	* x11vnc: first pass at doing modtweak via XKEYBOARD extension (-xkb)
	* -skip_keycodes; reset modtweaks on event MappingNotify.
	* fix bugs wrt PRIMARY handling.
	* continuation lines "\" in x11vncrc.  

2004-07-15  Karl Runge <runge@karlrunge.com>
	* x11vnc: modtweak is now the default
	* check X11/XKBlib.h in configure.ac to work around Solaris 7 bug.

2004-07-10  Karl Runge <runge@karlrunge.com>
	* x11vnc: norepeat to turn off X server autorepeat when clients exist,
	  let the client side do the autorepeating.

2004-06-26  Karl Runge <runge@karlrunge.com>
	* x11vnc: add "-scale fraction" for global server-side scaling.

2004-06-17  Karl Runge <runge@karlrunge.com>
	* x11vnc: simple ~/.x11vncrc config file support, -rc, -norc

2004-06-12  Karl Runge <runge@karlrunge.com>
	* x11vnc: -clear_mods, -clear_keys, and -storepasswd,
	* add RFB_SERVER_IP RFB_SERVER_PORT to -accept env.

2004-06-07  Johannes E. Schindelin  <Johannes.Schindelin@gmx.de>
	* libvncserver/cursor.c, rfb/rfb.h: fix cursor trails
	* */Makefile.am: stop automake nagging
	* libvncclient/*, client_examples/*: streamline API, SDLvncviewer added
	* examples/, libvncclient/, test/: moved tests to test/

2004-06-05  Karl Runge <runge@karlrunge.com>
	* x11vnc: rearrange file for easier maintenance
	* add RFB_CLIENT_COUNT to -accept and -gone commands

2004-05-27  Karl Runge <runge@karlrunge.com>
	* x11vnc: -viewpasswd, viewonly passwds.
	* some typos in prepare_x11vnc_dist.sh 
	* libvncserver: fix view-only plain passwd and view-only CutText 

2004-05-25  Johannes E. Schindelin  <Johannes.Schindelin@gmx.de>
	* moved the library into libvncserver/
	* moved x11vnc into x11vnc/

2004-05-21  Karl Runge <runge@karlrunge.com>
	* x11vnc: -gone, -passwdfile, -o logfile; add view-only to -accept

2004-05-08  Karl Runge <runge@karlrunge.com>
	* x11vnc: add -accept some-command/xmessage/popup

2004-05-05  Karl Runge <runge@karlrunge.com>
	* x11vnc: mouse button -> keystrokes and keystroke -> mouse button
	  mappings in -buttonmap and -remap
	* shm OS blacklist revert to -onetile

2004-04-28  Karl Runge <runge@karlrunge.com>
	* x11vnc: -auth, more -cursorpos and -nofb work

2004-04-19  Karl Runge <runge@karlrunge.com>
	* x11vnc: -cursorpos, -sigpipe

2004-04-13  Karl Runge <runge@karlrunge.com>
	* x11vnc: do not send selection unless all clients
	  are in RFB_NORMAL state.
	* increase rfbMaxClientWait when threaded to avoid
	  ReadExact() timeouts for some viewers.

2004-04-08  Karl Runge <runge@karlrunge.com>
	* x11vnc options -blackout, -xinerama, -xwarppointer
	* modify configure.ac to pick up -lXinerama
	* extend -remap to take mapping list.
	* check cargs result for unused args.

2004-03-22  Johannes E. Schindelin  <Johannes.Schindelin@gmx.de>
	* fix cargs.c (hopefully for the last time):
	  arguments were not correctly purged

2004-03-15  Johannes E. Schindelin  <Johannes.Schindelin@gmx.de>
	* fix libvncserver-config to again return a linker when
	  called with --link

2004-03-10  Karl Runge <runge@karlrunge.com>
	* x11vnc options -vncconnect, -connect, -remap,
	  -debug_pointer, and -debug_keyboard
	* support reverse connections, vncconnect(1), etc.
	* expt. with user supplied keysym remapping.
	* debug output option for pointer and keyboard.

2004-02-29  Johannes E. Schindelin  <Johannes.Schindelin@gmx.de>
	* fixed warning of valgrind for regiontest

2004-02-19  Karl Runge <runge@karlrunge.com>
	* x11vnc options -nosel -noprimary -visual.
	* add clipboard/selection handling.
	* add visual option (mostly for testing and workarounds).
	* improve shm cleanup on failures.

2004-02-04  Johannes E. Schindelin  <Johannes.Schindelin@gmx.de>
	* Make examples (at least a few) compileable with g++,
	  as pointed out by Juan Jose Costello

2004-01-30  Johannes E. Schindelin  <Johannes.Schindelin@gmx.de>
	* Thanks to Paul Fox from Bright Star Engineering,
	  a few more memory leaks were fixed.

2004-01-29  Johannes E. Schindelin  <Johannes.Schindelin@gmx.de>
	* Honour the check for libz and libjpeg again.

2004-01-21  Johannes E. Schindelin  <Johannes.Schindelin@gmx.de>
	* do not send unneccessary updates when drawing a cursor
	* ignore SIGPIPE; it is handled by EPIPE
	* add an example how to use rfbDoCopyRect
	* add experimental progressive updating (off by default)

2004-01-19  Karl Runge <runge@karlrunge.com>
	* handle mouse button number mismatch
	* improved pointer input handling during drags, etc.
	* somewhat faster copy_tiles() -> copy_tiles()
	* x11vnc options -buttonmap -old_pointer -old_copytile

2004-01-16  Johannes E. Schindelin  <Johannes.Schindelin@gmx.de>
	* compile fix for cygwin

2004-01-09  Karl Runge <runge@karlrunge.com>
	* x11vnc options -allow, -localhost, -nodragging, -input_skip
	* minimize memory usage under -nofb

2003-12-08  Karl Runge <runge@karlrunge.com>
	* add check for XKEYBOARD extension in configure.ac
	* support XBell events (disable: "-nobell"), "-nofb" in x11vnc

2003-11-07  Karl Runge <runge@karlrunge.com>
	* support "-inetd", "-noshm", "-flipbyteorder" in x11vnc

2003-10-26  Johannes E. Schindelin  <Johannes.Schindelin@gmx.de>
	* released Version 0.6

2003-09-11  Mark McLoughlin  <mark@skynet.ie>

	* Makefile.in, */Makefile.in, aclocal.m4,
	  bootstrap.sh, config.h.in, configure,
	  depcomp, install-sh, missing, mkinstalldirs,
	Removed auto-generated files from CVS.

2003-09-11  Mark McLoughlin  <mark@skynet.ie>

	* rdr/Exception.h, rdr/FdInStream.cxx, rdr/FdInStream.h,
	  rdr/FdOutStream.cxx, rdr/FdOutStream.h, rdr/FixedMemOutStream.h,
	  rdr/InStream.cxx, rdr/InStream.h, rdr/MemInStream.h,
	  rdr/MemOutStream.h, rdr/NullOutStream.cxx, rdr/NullOutStream.h,
	  rdr/OutStream.h, rdr/ZlibInStream.cxx, rdr/ZlibInStream.h,
	  rdr/ZlibOutStream.cxx, rdr/ZlibOutStream.h, rdr/types.h,
	  zrle.cxx, zrleDecode.h, zrleEncode.h: remove original
	C++ ZRLE implementation. Its been ported to C.

	* NEWS: copy the existing ChangeLog to here and make
	this a more detailed ChangeLog.