Update translation files tdegraphics / kdvi

Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.

1 files changed, 328 insertions, 325 deletions

diff --git a/tde-i18n-hi/messages/tdegraphics/kdvi.po b/tde-i18n-hi/messages/tdegraphics/kdvi.po
index 5d025aa7540..56f4de90d06 100644
--- a/tde-i18n-hi/messages/tdegraphics/kdvi.po
+++ b/tde-i18n-hi/messages/tdegraphics/kdvi.po
@@ -4,7 +4,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: kdvi\n"
-"POT-Creation-Date: 2014-09-29 12:06-0500\n"
+"POT-Creation-Date: 2018-12-21 14:20+0100\n"
 "PO-Revision-Date: 2004-08-22 15:40+0530\n"
 "Last-Translator: Ravishankar Shrivastava <raviratlami@gmail.com>\n"
 "Language-Team: Hindi <indlinux-hindi@lists.sourceforge.net>\n"
@@ -14,6 +14,18 @@ msgstr ""
 "Content-Transfer-Encoding: 8bit\n"
 "X-Generator: KBabel 1.3.1\n"
 
+#: _translatorinfo:1
+msgid ""
+"_: NAME OF TRANSLATORS\n"
+"Your names"
+msgstr "रविशंकर श्रीवास्तव"
+
+#: _translatorinfo:2
+msgid ""
+"_: EMAIL OF TRANSLATORS\n"
+"Your emails"
+msgstr "raviratlami@yahoo.com , http://www.geocities.com/raviratlami/"
+
 #: TeXFontDefinition.cpp:108
 msgid "Cannot find font %1, file %2."
 msgstr "फ़ॉन्ट फ़ाइल %1 ढूंढ नहीं सका %2."
@@ -42,7 +54,8 @@ msgstr "फ़ाइल %1 के लिए फ़ॉन्ट फ़ाइल �
 
 #: TeXFont_PFB.cpp:44
 msgid ""
-"The font file %1 could be opened and read, but its font format is unsupported."
+"The font file %1 could be opened and read, but its font format is "
+"unsupported."
 msgstr ""
 
 #: TeXFont_PFB.cpp:50
@@ -104,27 +117,15 @@ msgstr ""
 msgid "Font has non-square aspect ratio "
 msgstr "फ़ॉन्ट में नॉन-स्कवेयर आस्पेक्ट रेशो है"
 
-#: _translatorinfo.cpp:1
-msgid ""
-"_: NAME OF TRANSLATORS\n"
-"Your names"
-msgstr "रविशंकर श्रीवास्तव"
-
-#: _translatorinfo.cpp:3
-msgid ""
-"_: EMAIL OF TRANSLATORS\n"
-"Your emails"
-msgstr "raviratlami@yahoo.com , http://www.geocities.com/raviratlami/"
-
 #: dviFile.cpp:112
 msgid "The DVI file does not start with the preamble."
 msgstr ""
 
 #: dviFile.cpp:117
 msgid ""
-"The DVI file contains the wrong version of DVI output for this program. Hint: "
-"If you use the typesetting system Omega, you have to use a special program, "
-"such as oxdvi."
+"The DVI file contains the wrong version of DVI output for this program. "
+"Hint: If you use the typesetting system Omega, you have to use a special "
+"program, such as oxdvi."
 msgstr ""
 
 #: dviFile.cpp:155
@@ -168,9 +169,13 @@ msgstr "केडीवीआईः जानकारी"
 
 #: dviRenderer.cpp:277
 msgid ""
-"<qt>This DVI file contains source file information. You may click into the text "
-"with the middle mouse button, and an editor will open the TeX-source file "
-"immediately.</qt>"
+"<qt>This DVI file contains source file information. You may click into the "
+"text with the middle mouse button, and an editor will open the TeX-source "
+"file immediately.</qt>"
+msgstr ""
+
+#: dviRenderer.cpp:284
+msgid "Do not show this message again"
 msgstr ""
 
 #: dviRenderer.cpp:286
@@ -193,8 +198,8 @@ msgstr ""
 
 #: dviRenderer.cpp:439
 msgid ""
-"<qt><strong>File error.</strong> The specified file '%1' does not exist. KDVI "
-"already tried to add the ending '.dvi'.</qt>"
+"<qt><strong>File error.</strong> The specified file '%1' does not exist. "
+"KDVI already tried to add the ending '.dvi'.</qt>"
 msgstr ""
 
 #: dviRenderer.cpp:441
@@ -203,23 +208,23 @@ msgstr "फ़ाइल त्रुटि!"
 
 #: dviRenderer.cpp:452
 msgid ""
-"<qt>Could not open file <nobr><strong>%1</strong></nobr> which has type <strong>"
-"%2</strong>. KDVI can only load DVI (.dvi) files.</qt>"
+"<qt>Could not open file <nobr><strong>%1</strong></nobr> which has type "
+"<strong>%2</strong>. KDVI can only load DVI (.dvi) files.</qt>"
 msgstr ""
 
 #: dviRenderer.cpp:463 dviRenderer.cpp:481
 msgid ""
-"<qt>File corruption! KDVI had trouble interpreting your DVI file. Most likely "
-"this means that the DVI file is broken.</qt>"
+"<qt>File corruption! KDVI had trouble interpreting your DVI file. Most "
+"likely this means that the DVI file is broken.</qt>"
 msgstr ""
 
 #: dviRenderer.cpp:640
 msgid ""
-"<qt>You have asked KDVI to locate the place in the DVI file which corresponds "
-"to line %1 in the TeX-file <strong>%2</strong>. It seems, however, that the DVI "
-"file does not contain the necessary source file information. We refer to the "
-"manual of KDVI for a detailed explanation on how to include this information. "
-"Press the F1 key to open the manual.</qt>"
+"<qt>You have asked KDVI to locate the place in the DVI file which "
+"corresponds to line %1 in the TeX-file <strong>%2</strong>. It seems, "
+"however, that the DVI file does not contain the necessary source file "
+"information. We refer to the manual of KDVI for a detailed explanation on "
+"how to include this information. Press the F1 key to open the manual.</qt>"
 msgstr ""
 
 #: dviRenderer.cpp:645 dviRenderer.cpp:685
@@ -228,14 +233,14 @@ msgstr "सन्दर्भ नहीं मिला"
 
 #: dviRenderer.cpp:683
 msgid ""
-"<qt>KDVI was not able to locate the place in the DVI file which corresponds to "
-"line %1 in the TeX-file <strong>%2</strong>.</qt>"
+"<qt>KDVI was not able to locate the place in the DVI file which corresponds "
+"to line %1 in the TeX-file <strong>%2</strong>.</qt>"
 msgstr ""
 
 #: dviRenderer.cpp:737
 msgid ""
-"The DVI-file refers to the TeX-file <strong>%1</strong> "
-"which could not be found."
+"The DVI-file refers to the TeX-file <strong>%1</strong> which could not be "
+"found."
 msgstr ""
 
 #: dviRenderer.cpp:740
@@ -245,8 +250,8 @@ msgstr "फ़ाइल ढूंढ नहीं सका "
 #: dviRenderer.cpp:747
 msgid ""
 "You have not yet specified an editor for inverse search. Please choose your "
-"favorite editor in the <strong>DVI options dialog</strong> "
-"which you will find in the <strong>Settings</strong>-menu."
+"favorite editor in the <strong>DVI options dialog</strong> which you will "
+"find in the <strong>Settings</strong>-menu."
 msgstr ""
 
 #: dviRenderer.cpp:752
@@ -259,15 +264,12 @@ msgstr ""
 
 #: dviRenderer.cpp:785
 msgid ""
-"<qt>The external program"
-"<br>"
-"<br><tt><strong>%1</strong></tt>"
-"<br/>"
-"<br/>which was used to call the editor for inverse search, reported an error. "
-"You might wish to look at the <strong>document info dialog</strong> "
-"which you will find in the File-Menu for a precise error report. The manual for "
-"KDVI contains a detailed explanation how to set up your editor for use with "
-"KDVI, and a list of common problems.</qt>"
+"<qt>The external program<br><br><tt><strong>%1</strong></tt><br/><br/>which "
+"was used to call the editor for inverse search, reported an error. You might "
+"wish to look at the <strong>document info dialog</strong> which you will "
+"find in the File-Menu for a precise error report. The manual for KDVI "
+"contains a detailed explanation how to set up your editor for use with KDVI, "
+"and a list of common problems.</qt>"
 msgstr ""
 
 #: dviRenderer.cpp:791
@@ -304,14 +306,14 @@ msgstr ""
 
 #: dviRenderer_export.cpp:84
 msgid ""
-"KDVI could not locate the program 'dvipdfm' on your computer. That program is "
-"essential for the export function to work. You can, however, convert the "
-"DVI-file to PDF using the print function of KDVI, but that will often produce "
-"documents which print ok, but are of inferior quality if viewed in the Acrobat "
-"Reader. It may be wise to upgrade to a more recent version of your TeX "
-"distribution which includes the 'dvipdfm' program.\n"
-"Hint to the perplexed system administrator: KDVI uses the shell's PATH variable "
-"when looking for programs."
+"KDVI could not locate the program 'dvipdfm' on your computer. That program "
+"is essential for the export function to work. You can, however, convert the "
+"DVI-file to PDF using the print function of KDVI, but that will often "
+"produce documents which print ok, but are of inferior quality if viewed in "
+"the Acrobat Reader. It may be wise to upgrade to a more recent version of "
+"your TeX distribution which includes the 'dvipdfm' program.\n"
+"Hint to the perplexed system administrator: KDVI uses the shell's PATH "
+"variable when looking for programs."
 msgstr ""
 
 #: dviRenderer_export.cpp:99
@@ -322,8 +324,7 @@ msgstr "*.pdf|पोर्टेबल दस्तावेज़ फॉर्�
 msgid "Export File As"
 msgstr "फ़ाइल ऐसे निर्यात करें"
 
-#: dviRenderer_export.cpp:104 dviRenderer_export.cpp:203
-#: kdvi_multipage.cpp:164
+#: dviRenderer_export.cpp:104 dviRenderer_export.cpp:203 kdvi_multipage.cpp:164
 msgid ""
 "The file %1\n"
 "exists. Do you want to overwrite that file?"
@@ -331,8 +332,7 @@ msgstr ""
 "फ़ाइल %1 \n"
 "पहले से ही मौजूद है. क्या आप इसके ऊपर लिखना चाहते हैं?"
 
-#: dviRenderer_export.cpp:105 dviRenderer_export.cpp:204
-#: kdvi_multipage.cpp:165
+#: dviRenderer_export.cpp:105 dviRenderer_export.cpp:204 kdvi_multipage.cpp:165
 msgid "Overwrite File"
 msgstr "फ़ाइल के ऊपर लिखें"
 
@@ -347,9 +347,9 @@ msgstr ""
 
 #: dviRenderer_export.cpp:114
 msgid ""
-"KDVI is currently using the external program 'dvipdfm' to convert your DVI-file "
-"to PDF. Sometimes that can take a while because dvipdfm needs to generate its "
-"own bitmap fonts Please be patient."
+"KDVI is currently using the external program 'dvipdfm' to convert your DVI-"
+"file to PDF. Sometimes that can take a while because dvipdfm needs to "
+"generate its own bitmap fonts Please be patient."
 msgstr ""
 
 #: dviRenderer_export.cpp:118
@@ -366,9 +366,10 @@ msgstr "कृपया धैर्य रखें"
 
 #: dviRenderer_export.cpp:137
 msgid ""
-"<qt>The external program 'dvipdf', which was used to export the file, reported "
-"an error. You might wish to look at the <strong>document info dialog</strong> "
-"which you will find in the File-Menu for a precise error report.</qt>"
+"<qt>The external program 'dvipdf', which was used to export the file, "
+"reported an error. You might wish to look at the <strong>document info "
+"dialog</strong> which you will find in the File-Menu for a precise error "
+"report.</qt>"
 msgstr ""
 
 #: dviRenderer_export.cpp:140
@@ -381,11 +382,10 @@ msgid ""
 "PostScript format, and cannot be handled by the <strong>dvips</strong> "
 "program that KDVI uses interally to print or to export to PostScript. The "
 "functionality that you require is therefore unavailable in this version of "
-"KDVI.</p>"
-"<p>As a workaround, you can use the <strong>File/Export As</strong>"
-"-Menu to save this file in PDF format, and then use a PDF viewer.</p>"
-"<p>The author of KDVI apologizes for the inconvenience. If enough users "
-"complain, the missing functionality might later be added.</p></qt>"
+"KDVI.</p><p>As a workaround, you can use the <strong>File/Export As</strong>-"
+"Menu to save this file in PDF format, and then use a PDF viewer.</p><p>The "
+"author of KDVI apologizes for the inconvenience. If enough users complain, "
+"the missing functionality might later be added.</p></qt>"
 msgstr ""
 
 #: dviRenderer_export.cpp:188
@@ -402,9 +402,9 @@ msgstr ""
 
 #: dviRenderer_export.cpp:217
 msgid ""
-"KDVI is currently using the external program 'dvips' to convert your DVI-file "
-"to PostScript. Sometimes that can take a while because dvips needs to generate "
-"its own bitmap fonts Please be patient."
+"KDVI is currently using the external program 'dvips' to convert your DVI-"
+"file to PostScript. Sometimes that can take a while because dvips needs to "
+"generate its own bitmap fonts Please be patient."
 msgstr ""
 
 #: dviRenderer_export.cpp:221
@@ -417,9 +417,10 @@ msgstr ""
 
 #: dviRenderer_export.cpp:300
 msgid ""
-"<qt>The external program 'dvips', which was used to export the file, reported "
-"an error. You might wish to look at the <strong>document info dialog</strong> "
-"which you will find in the File-Menu for a precise error report.</qt>"
+"<qt>The external program 'dvips', which was used to export the file, "
+"reported an error. You might wish to look at the <strong>document info "
+"dialog</strong> which you will find in the File-Menu for a precise error "
+"report.</qt>"
 msgstr ""
 
 #: dviRenderer_export.cpp:303
@@ -433,8 +434,7 @@ msgstr "सन्निहित किया जा रहा है %1"
 
 #: dviRenderer_prescan.cpp:105
 msgid ""
-"Page %1: The PostScript file <strong>%2</strong> could not be found."
-"<br>"
+"Page %1: The PostScript file <strong>%2</strong> could not be found.<br>"
 msgstr ""
 
 #: dviRenderer_prescan.cpp:255
@@ -456,8 +456,9 @@ msgstr ""
 #: fontpool.cpp:48
 msgid ""
 "KDVI is currently generating bitmap fonts which are needed to display your "
-"document. For this, KDVI uses a number of external programs, such as MetaFont. "
-"You can find the output of these programs later in the document info dialog."
+"document. For this, KDVI uses a number of external programs, such as "
+"MetaFont. You can find the output of these programs later in the document "
+"info dialog."
 msgstr ""
 
 #: fontpool.cpp:51
@@ -480,6 +481,10 @@ msgstr "टीईएक्स नाम"
 msgid "Family"
 msgstr "परिवार"
 
+#: fontpool.cpp:192
+msgid "Zoom"
+msgstr ""
+
 #: fontpool.cpp:193
 msgid "Type"
 msgstr "क़िस्म"
@@ -498,8 +503,7 @@ msgstr "फ़ॉन्ट फ़ाइल नहीं मिला"
 
 #: fontpool.cpp:284
 msgid ""
-"<qt>"
-"<p>KDVI was not able to locate all the font files which are necessary to "
+"<qt><p>KDVI was not able to locate all the font files which are necessary to "
 "display the current DVI file. Your document might be unreadable.</p></qt>"
 msgstr ""
 
@@ -522,9 +526,8 @@ msgstr ""
 msgid ""
 "<p>The shell process for the kpsewhich program could not be started. "
 "Consequently, some font files could not be found, and your document might by "
-"unreadable. If this error is reproducable please report the issue to the KDVI "
-"developers using the 'Help' menu."
-"<p>"
+"unreadable. If this error is reproducable please report the issue to the "
+"KDVI developers using the 'Help' menu.<p>"
 msgstr ""
 
 #: fontpool.cpp:367 fontpool.cpp:405
@@ -540,14 +543,14 @@ msgstr "फ़ॉन्ट नहीं मिला - केडीवीआई"
 #: fontpool.cpp:394
 msgid ""
 "<p>There were problems running kpsewhich. As a result, some font files could "
-"not be located, and your document might be unreadable.</p>"
-"<p><b>Possible reason:</b> The kpsewhich program is perhaps not installed on "
-"your system, or it cannot be found in the current search path.</p>"
-"<p><b>What you can do:</b> The kpsewhich program is normally contained in "
-"distributions of the TeX typesetting system. If TeX is not installed on your "
-"system, you could install the TeTeX distribution (www.tetex.org). If you are "
-"sure that TeX is installed, please try to use the kpsewhich program from the "
-"command line to check if it really works.</p>"
+"not be located, and your document might be unreadable.</p><p><b>Possible "
+"reason:</b> The kpsewhich program is perhaps not installed on your system, "
+"or it cannot be found in the current search path.</p><p><b>What you can do:</"
+"b> The kpsewhich program is normally contained in distributions of the TeX "
+"typesetting system. If TeX is not installed on your system, you could "
+"install the TeTeX distribution (www.tetex.org). If you are sure that TeX is "
+"installed, please try to use the kpsewhich program from the command line to "
+"check if it really works.</p>"
 msgstr ""
 
 #: fontpool.cpp:590
@@ -579,6 +582,11 @@ msgstr "डीवीआई फ़ाइल"
 msgid "Information on the currently loaded DVI-file."
 msgstr ""
 
+#: infodialog.cpp:33
+#, fuzzy
+msgid "Fonts"
+msgstr "पीके फ़ॉन्ट्स"
+
 #: infodialog.cpp:38
 msgid "Information on currently loaded fonts."
 msgstr ""
@@ -586,8 +594,8 @@ msgstr ""
 #: infodialog.cpp:39
 msgid ""
 "This text field shows detailed information about the currently loaded fonts. "
-"This is useful for experts who want to locate problems in the setup of TeX or "
-"KDVI."
+"This is useful for experts who want to locate problems in the setup of TeX "
+"or KDVI."
 msgstr ""
 
 #: infodialog.cpp:43
@@ -605,8 +613,8 @@ msgstr "बाहरी प्रोग्राम का आउटपुट"
 #: infodialog.cpp:48
 msgid ""
 "KDVI uses external programs, such as MetaFont, dvipdfm or dvips. This text "
-"field shows the output of these programs. That is useful for experts who want "
-"to find problems in the setup of TeX or KDVI."
+"field shows the output of these programs. That is useful for experts who "
+"want to find problems in the setup of TeX or KDVI."
 msgstr ""
 
 #: infodialog.cpp:64
@@ -665,8 +673,8 @@ msgstr ""
 
 #: kdvi_multipage.cpp:105
 msgid ""
-"This program displays Device Independent (DVI) files which are produced by the "
-"TeX typesetting system.\n"
+"This program displays Device Independent (DVI) files which are produced by "
+"the TeX typesetting system.\n"
 "KDVI 1.3 is based on original code from KDVI version 0.43 and xdvik."
 msgstr ""
 
@@ -720,8 +728,8 @@ msgstr "छापें %1"
 #: kdvi_multipage.cpp:251
 msgid ""
 "The list of pages you selected was empty.\n"
-"Maybe you made an error in selecting the pages, e.g. by giving an invalid range "
-"like '7-2'."
+"Maybe you made an error in selecting the pages, e.g. by giving an invalid "
+"range like '7-2'."
 msgstr ""
 
 #: kdvi_multipage.cpp:414
@@ -733,8 +741,8 @@ msgid ""
 "<qt>This function searches the DVI file for plain text. Unfortunately, this "
 "version of KDVI treats only plain ASCII characters properly. Symbols, "
 "ligatures, mathematical formulae, accented characters, and non-English text, "
-"such as Russian or Korean, will most likely be messed up completely. Continue "
-"anyway?</qt>"
+"such as Russian or Korean, will most likely be messed up completely. "
+"Continue anyway?</qt>"
 msgstr ""
 
 #: kdvi_multipage.cpp:469 kdvi_multipage_texthandling.cpp:64
@@ -769,8 +777,8 @@ msgstr ""
 
 #: main.cpp:37
 msgid ""
-"This program displays Device Independent (DVI) files which are produced by the "
-"TeX typesetting system.\n"
+"This program displays Device Independent (DVI) files which are produced by "
+"the TeX typesetting system.\n"
 "This KDVI version is based on original code from KDVI version 0.43 and xdvik."
 msgstr ""
 
@@ -780,8 +788,8 @@ msgstr ""
 
 #: main.cpp:86
 msgid ""
-"The URL %1 does not point to a local file. You can only specify local files if "
-"you are using the '--unique' option."
+"The URL %1 does not point to a local file. You can only specify local files "
+"if you are using the '--unique' option."
 msgstr ""
 
 #: optionDialogFontsWidget.cpp:34
@@ -835,210 +843,28 @@ msgstr "पोस्टस्क्रिप्ट ग्राफिक्स �
 #: psgs.cpp:250
 msgid ""
 "<qt>The version of Ghostview that is installed on this computer does not "
-"contain any of the Ghostview device drivers that are known to KDVI. PostScript "
-"support has therefore been turned off in KDVI.</qt>"
+"contain any of the Ghostview device drivers that are known to KDVI. "
+"PostScript support has therefore been turned off in KDVI.</qt>"
 msgstr ""
 
 #: psgs.cpp:253
 msgid ""
-"<qt>"
-"<p>The Ghostview program, which KDVI uses internally to display the PostScript "
-"graphics that is included in this DVI file, is generally able to write its "
-"output in a variety of formats. The sub-programs that Ghostview uses for these "
-"tasks are called 'device drivers'; there is one device driver for each format "
-"that Ghostview is able to write. Different versions of Ghostview often have "
-"different sets of device drivers available. It seems that the version of "
-"Ghostview that is installed on this computer does not contain <strong>"
-"any</strong> of the device drivers that are known to KDVI.</p>"
-"<p>It seems unlikely that a regular installation of Ghostview would not contain "
-"these drivers. This error may therefore point to a serious misconfiguration of "
-"the Ghostview installation on your computer.</p>"
-"<p>If you want to fix the problems with Ghostview, you can use the command "
-"<strong>gs --help</strong> to display the list of device drivers contained in "
-"Ghostview. Among others, KDVI can use the 'png256', 'jpeg' and 'pnm' drivers. "
-"Note that KDVI needs to be restarted to re-enable PostScript support.</p></qt>"
-msgstr ""
-
-#. i18n: file kdvi_part.rc line 6
-#: rc.cpp:6
-#, no-c-format
-msgid "Export As"
-msgstr "ऐसे निर्यात करें"
-
-#. i18n: file optionDialogFontsWidget_base.ui line 28
-#: rc.cpp:18
-#, fuzzy, no-c-format
-msgid "Use font hinting for Type 1 fonts, if available"
-msgstr "टाइप1 फ़ॉन्ट इस्तेमाल करें जब उपलब्ध हो"
-
-#. i18n: file optionDialogFontsWidget_base.ui line 31
-#: rc.cpp:21
-#, no-c-format
-msgid ""
-"You should enable this, if the use of font hinting improves readability on your "
-"machine."
-msgstr ""
-
-#. i18n: file optionDialogFontsWidget_base.ui line 34
-#: rc.cpp:24
-#, no-c-format
-msgid ""
-"Many modern fonts contain \"font hinting\" information which can be used to "
-"improve the appearance of a font on low-resolution displays, such as a computer "
-"monitor, or a notebook screen. However, many people find the \"improved\" fonts "
-"quite ugly and prefer to have this option disabled."
-msgstr ""
-
-#. i18n: file optionDialogSpecialWidget_base.ui line 27
-#: rc.cpp:27
-#, no-c-format
-msgid "Show PostScript specials"
-msgstr "पोस्टस्क्रिप्ट विशेष दिखाएँ"
-
-#. i18n: file optionDialogSpecialWidget_base.ui line 30
-#: rc.cpp:30
-#, no-c-format
-msgid "If in doubt, enable this option."
-msgstr "इस विकल्प को सक्षम करें यदि सन्देह हो."
-
-#. i18n: file optionDialogSpecialWidget_base.ui line 33
-#: rc.cpp:33 rc.cpp:83
-#, no-c-format
-msgid ""
-"Some DVI files contain PostScript graphics. If enabled, KDVI will use the "
-"Ghostview PostScript interpreter to display these. You probably want to enable "
-"this option, unless you have a DVI-file whose PostScript part is broken, or too "
-"large for your machine."
-msgstr ""
-
-#. i18n: file optionDialogSpecialWidget_base.ui line 41
-#: rc.cpp:36
-#, no-c-format
-msgid "Editor for Inverse Search"
-msgstr "उलट खोज के लिए संपादक"
-
-#. i18n: file optionDialogSpecialWidget_base.ui line 60
-#: rc.cpp:39
-#, no-c-format
-msgid "Choose an editor which is used in inverse search."
-msgstr ""
-
-#. i18n: file optionDialogSpecialWidget_base.ui line 64
-#: rc.cpp:42
-#, no-c-format
-msgid ""
-"<p>Some DVI files contain 'inverse search' information. If such a DVI file is "
-"loaded, you can right-click into KDVI and an editor will open, load the TeX "
-"file and jump to the correct position. You can select your favorite editor "
-"here. If in doubt, 'nedit' is usually a good choice.</p>\n"
-"<p>Check the KDVI manual to see how to prepare DVI files which support the "
-"inverse search.</p>"
-msgstr ""
-
-#. i18n: file optionDialogSpecialWidget_base.ui line 80
-#: rc.cpp:46
-#, no-c-format
-msgid "Description:"
-msgstr "वर्णनः"
-
-#. i18n: file optionDialogSpecialWidget_base.ui line 96
-#: rc.cpp:49
-#, no-c-format
-msgid "Shell command:"
-msgstr "शेल कमांडः"
-
-#. i18n: file optionDialogSpecialWidget_base.ui line 115
-#: rc.cpp:52
-#, no-c-format
-msgid ""
-"Explains about the editor's capabilities in conjunction with inverse search."
-msgstr ""
-
-#. i18n: file optionDialogSpecialWidget_base.ui line 119
-#: rc.cpp:55
-#, no-c-format
-msgid ""
-"<p>Not all editors are well suited for inverse search. For instance, many "
-"editors have no command like 'If the file is not yet loaded, load it. "
-"Otherwise, bring the window with the file to the front'. If you are using an "
-"editor like this, clicking into the DVI file will always open a new editor, "
-"even if the TeX file is already open. Likewise, many editors have no command "
-"line argument that would allow KDVI to specify the exact line which you wish to "
-"edit.</p>\n"
-"<p>If you feel that KDVI's support for a certain editor is inadequate, please "
-"contact the Trinity developers at www.trinitydesktop.org.</p>"
-msgstr ""
-
-#. i18n: file optionDialogSpecialWidget_base.ui line 135
-#: rc.cpp:59
-#, no-c-format
-msgid "Shell-command line used to start the editor."
-msgstr ""
-
-#. i18n: file optionDialogSpecialWidget_base.ui line 138
-#: rc.cpp:62
-#, no-c-format
-msgid ""
-"If you are using inverse search, KDVI uses this command line to start the "
-"editor. The field '%f' is replaced with the filename, and '%l' is replaced with "
-"the line number."
-msgstr ""
-
-#. i18n: file optionDialogSpecialWidget_base.ui line 154
-#: rc.cpp:65
-#, no-c-format
-msgid "Editor:"
-msgstr "संपादकः"
-
-#. i18n: file optionDialogSpecialWidget_base.ui line 170
-#: rc.cpp:68
-#, no-c-format
-msgid "What is 'inverse search'? "
-msgstr "'उलट खोज' क्या है?"
-
-#. i18n: file optionDialogSpecialWidget_base.ui line 176
-#: rc.cpp:71
-#, no-c-format
-msgid "inv-search"
-msgstr "उलट-खोज"
-
-#. i18n: file kdvi.kcfg line 10
-#: rc.cpp:74
-#, fuzzy, no-c-format
-msgid ""
-"Use MetaFont to generate missing fonts. If in doubt, enable this option."
-msgstr "इस विकल्प को सक्षम करें यदि सन्देह हो."
-
-#. i18n: file kdvi.kcfg line 11
-#: rc.cpp:77
-#, no-c-format
-msgid ""
-"Allows KDVI to use MetaFont to produce bitmap fonts. Unless you have a very "
-"specific reason, you probably want to enable this option."
-msgstr ""
-
-#. i18n: file kdvi.kcfg line 15
-#: rc.cpp:80
-#, fuzzy, no-c-format
-msgid "Show PostScript specials. If in doubt, enable this option."
-msgstr "इस विकल्प को सक्षम करें यदि सन्देह हो."
-
-#. i18n: file kdvi.kcfg line 20
-#: rc.cpp:86
-#, no-c-format
-msgid ""
-"Use font hinting. You should enable this, if the use of font hinting improves "
-"readability on your machine."
-msgstr ""
-
-#. i18n: file kdvi.kcfg line 21
-#: rc.cpp:89
-#, no-c-format
-msgid ""
-"Many modern fonts contain &quot;font hinting&quot; information which can be "
-"used to improve the appearance of a font on low-resolution displays, such as a "
-"computer monitor, or a notebook screen. However, many people find the "
-"&quot;improved&quot; fonts quite ugly and prefer to have this option disabled."
+"<qt><p>The Ghostview program, which KDVI uses internally to display the "
+"PostScript graphics that is included in this DVI file, is generally able to "
+"write its output in a variety of formats. The sub-programs that Ghostview "
+"uses for these tasks are called 'device drivers'; there is one device driver "
+"for each format that Ghostview is able to write. Different versions of "
+"Ghostview often have different sets of device drivers available. It seems "
+"that the version of Ghostview that is installed on this computer does not "
+"contain <strong>any</strong> of the device drivers that are known to KDVI.</"
+"p><p>It seems unlikely that a regular installation of Ghostview would not "
+"contain these drivers. This error may therefore point to a serious "
+"misconfiguration of the Ghostview installation on your computer.</p><p>If "
+"you want to fix the problems with Ghostview, you can use the command "
+"<strong>gs --help</strong> to display the list of device drivers contained "
+"in Ghostview. Among others, KDVI can use the 'png256', 'jpeg' and 'pnm' "
+"drivers. Note that KDVI needs to be restarted to re-enable PostScript "
+"support.</p></qt>"
 msgstr ""
 
 #: special.cpp:39
@@ -1047,8 +873,8 @@ msgstr ""
 
 #: special.cpp:224
 msgid ""
-"Error in DVIfile '%1', page %2. Color pop command issued when the color stack "
-"is empty."
+"Error in DVIfile '%1', page %2. Color pop command issued when the color "
+"stack is empty."
 msgstr ""
 
 #: special.cpp:309
@@ -1130,42 +956,222 @@ msgstr "उपेक्षित."
 msgid "Wrong command byte found in VF macro list: %1"
 msgstr ""
 
-#: tips.txt:3
+#: kdvi.kcfg:10
+#, fuzzy, no-c-format
+msgid ""
+"Use MetaFont to generate missing fonts. If in doubt, enable this option."
+msgstr "इस विकल्प को सक्षम करें यदि सन्देह हो."
+
+#: kdvi.kcfg:11
+#, no-c-format
+msgid ""
+"Allows KDVI to use MetaFont to produce bitmap fonts. Unless you have a very "
+"specific reason, you probably want to enable this option."
+msgstr ""
+
+#: kdvi.kcfg:15
+#, fuzzy, no-c-format
+msgid "Show PostScript specials. If in doubt, enable this option."
+msgstr "इस विकल्प को सक्षम करें यदि सन्देह हो."
+
+#: kdvi.kcfg:16 optionDialogSpecialWidget_base.ui:33
+#, no-c-format
+msgid ""
+"Some DVI files contain PostScript graphics. If enabled, KDVI will use the "
+"Ghostview PostScript interpreter to display these. You probably want to "
+"enable this option, unless you have a DVI-file whose PostScript part is "
+"broken, or too large for your machine."
+msgstr ""
+
+#: kdvi.kcfg:20
+#, no-c-format
+msgid ""
+"Use font hinting. You should enable this, if the use of font hinting "
+"improves readability on your machine."
+msgstr ""
+
+#: kdvi.kcfg:21
+#, no-c-format
+msgid ""
+"Many modern fonts contain &quot;font hinting&quot; information which can be "
+"used to improve the appearance of a font on low-resolution displays, such as "
+"a computer monitor, or a notebook screen. However, many people find the "
+"&quot;improved&quot; fonts quite ugly and prefer to have this option "
+"disabled."
+msgstr ""
+
+#: kdvi_part.rc:4
+#, fuzzy, no-c-format
+msgid "&File"
+msgstr "डीवीआई फ़ाइल"
+
+#: kdvi_part.rc:6
+#, no-c-format
+msgid "Export As"
+msgstr "ऐसे निर्यात करें"
+
+#: kdvi_part.rc:12
+#, fuzzy, no-c-format
+msgid "&Edit"
+msgstr "संपादकः"
+
+#: kdvi_part.rc:17
+#, no-c-format
+msgid "&Settings"
+msgstr ""
+
+#: kdvi_part.rc:21
+#, no-c-format
+msgid "&Help"
+msgstr ""
+
+#: optionDialogFontsWidget_base.ui:28
+#, fuzzy, no-c-format
+msgid "Use font hinting for Type 1 fonts, if available"
+msgstr "टाइप1 फ़ॉन्ट इस्तेमाल करें जब उपलब्ध हो"
+
+#: optionDialogFontsWidget_base.ui:31
+#, no-c-format
 msgid ""
-"<p>...that KDVI can also load compressed DVI-files? \n"
+"You should enable this, if the use of font hinting improves readability on "
+"your machine."
 msgstr ""
 
-#: tips.txt:8
+#: optionDialogFontsWidget_base.ui:34
+#, no-c-format
+msgid ""
+"Many modern fonts contain \"font hinting\" information which can be used to "
+"improve the appearance of a font on low-resolution displays, such as a "
+"computer monitor, or a notebook screen. However, many people find the "
+"\"improved\" fonts quite ugly and prefer to have this option disabled."
+msgstr ""
+
+#: optionDialogSpecialWidget_base.ui:27
+#, no-c-format
+msgid "Show PostScript specials"
+msgstr "पोस्टस्क्रिप्ट विशेष दिखाएँ"
+
+#: optionDialogSpecialWidget_base.ui:30
+#, no-c-format
+msgid "If in doubt, enable this option."
+msgstr "इस विकल्प को सक्षम करें यदि सन्देह हो."
+
+#: optionDialogSpecialWidget_base.ui:41
+#, no-c-format
+msgid "Editor for Inverse Search"
+msgstr "उलट खोज के लिए संपादक"
+
+#: optionDialogSpecialWidget_base.ui:60
+#, no-c-format
+msgid "Choose an editor which is used in inverse search."
+msgstr ""
+
+#: optionDialogSpecialWidget_base.ui:63
+#, no-c-format
+msgid ""
+"<p>Some DVI files contain 'inverse search' information. If such a DVI file "
+"is loaded, you can right-click into KDVI and an editor will open, load the "
+"TeX file and jump to the correct position. You can select your favorite "
+"editor here. If in doubt, 'nedit' is usually a good choice.</p>\n"
+"<p>Check the KDVI manual to see how to prepare DVI files which support the "
+"inverse search.</p>"
+msgstr ""
+
+#: optionDialogSpecialWidget_base.ui:80
+#, no-c-format
+msgid "Description:"
+msgstr "वर्णनः"
+
+#: optionDialogSpecialWidget_base.ui:96
+#, no-c-format
+msgid "Shell command:"
+msgstr "शेल कमांडः"
+
+#: optionDialogSpecialWidget_base.ui:115
+#, no-c-format
+msgid ""
+"Explains about the editor's capabilities in conjunction with inverse search."
+msgstr ""
+
+#: optionDialogSpecialWidget_base.ui:118
+#, no-c-format
+msgid ""
+"<p>Not all editors are well suited for inverse search. For instance, many "
+"editors have no command like 'If the file is not yet loaded, load it. "
+"Otherwise, bring the window with the file to the front'. If you are using an "
+"editor like this, clicking into the DVI file will always open a new editor, "
+"even if the TeX file is already open. Likewise, many editors have no command "
+"line argument that would allow KDVI to specify the exact line which you wish "
+"to edit.</p>\n"
+"<p>If you feel that KDVI's support for a certain editor is inadequate, "
+"please contact the Trinity developers at www.trinitydesktop.org.</p>"
+msgstr ""
+
+#: optionDialogSpecialWidget_base.ui:135
+#, no-c-format
+msgid "Shell-command line used to start the editor."
+msgstr ""
+
+#: optionDialogSpecialWidget_base.ui:138
+#, no-c-format
+msgid ""
+"If you are using inverse search, KDVI uses this command line to start the "
+"editor. The field '%f' is replaced with the filename, and '%l' is replaced "
+"with the line number."
+msgstr ""
+
+#: optionDialogSpecialWidget_base.ui:154
+#, no-c-format
+msgid "Editor:"
+msgstr "संपादकः"
+
+#: optionDialogSpecialWidget_base.ui:170
+#, no-c-format
+msgid "What is 'inverse search'? "
+msgstr "'उलट खोज' क्या है?"
+
+#: optionDialogSpecialWidget_base.ui:176
+#, no-c-format
+msgid "inv-search"
+msgstr "उलट-खोज"
+
+#: tips:3
+msgid "<p>...that KDVI can also load compressed DVI-files? \n"
+msgstr ""
+
+#: tips:9
 msgid ""
 "<p>...that you can mark text with the right mouse button and paste it\n"
 "into any application?\n"
 msgstr ""
 
-#: tips.txt:14
+#: tips:16
 msgid ""
-"<p>...that KDVI now supports inverse search? You can click into your DVI file \n"
+"<p>...that KDVI now supports inverse search? You can click into your DVI "
+"file \n"
 "with the middle mouse button and your editor opens, loads the TeX file, and\n"
 "jumps to the proper line! <a href=\"help:/kdvi/inverse-search.html\">The \n"
 "manual explains how to set up your editor for this.</a> \n"
 msgstr ""
 
-#: tips.txt:22
+#: tips:25
 msgid ""
-"<p>...that KDVI supports forward search? If you use Emacs or XEmacs, you can \n"
+"<p>...that KDVI supports forward search? If you use Emacs or XEmacs, you "
+"can \n"
 "jump directly from the TeX file to the associated place in the DVI file. \n"
-"<a href=\"help:/kdvi/forward-search.html\">The manual explains how to set up \n"
+"<a href=\"help:/kdvi/forward-search.html\">The manual explains how to set "
+"up \n"
 "your editor for this.</a> \n"
 msgstr ""
 
-#: tips.txt:30
-msgid ""
-"<p>...that KDVI now offers full text search? \n"
+#: tips:34
+msgid "<p>...that KDVI now offers full text search? \n"
 msgstr ""
 
-#: tips.txt:35
+#: tips:40
 msgid ""
-"<p>...that KDVI can save your DVI file as PostScript, PDF, and even plain text? "
-"\n"
+"<p>...that KDVI can save your DVI file as PostScript, PDF, and even plain "
+"text? \n"
 msgstr ""
 
 #~ msgid "Text..."
@@ -1210,9 +1216,6 @@ msgstr ""
 #~ msgid "Continue Without"
 #~ msgstr "के बगैर जारी रखें"
 
-#~ msgid "PK Fonts"
-#~ msgstr "पीके फ़ॉन्ट्स"
-
 #~ msgid "Generate missing fonts"
 #~ msgstr "गुमे फ़ॉन्ट्स तैयार करें"