Update translation files

Updated by Update PO files to match POT (msgmerge) hook in Weblate.

1 files changed, 121 insertions, 120 deletions

diff --git a/tde-i18n-hi/messages/tdeadmin/kcmlilo.po b/tde-i18n-hi/messages/tdeadmin/kcmlilo.po
index ca76eabf264..99764a82b90 100644
--- a/tde-i18n-hi/messages/tdeadmin/kcmlilo.po
+++ b/tde-i18n-hi/messages/tdeadmin/kcmlilo.po
@@ -4,7 +4,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: kcmlilo\n"
-"POT-Creation-Date: 2014-09-29 12:06-0500\n"
+"POT-Creation-Date: 2018-12-13 14:15+0100\n"
 "PO-Revision-Date: 2004-12-24 12:00+0530\n"
 "Last-Translator: Ravishankar Shrivastava <raviratlami@gmail.com>\n"
 "Language-Team: Hindi <indlinux-hindi@lists.sourceforge.net>\n"
@@ -13,6 +13,18 @@ msgstr ""
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 
+#: _translatorinfo:1
+msgid ""
+"_: NAME OF TRANSLATORS\n"
+"Your names"
+msgstr " रविशंकर श्रीवास्तव "
+
+#: _translatorinfo:2
+msgid ""
+"_: EMAIL OF TRANSLATORS\n"
+"Your emails"
+msgstr "raviratlami@yahoo.com , http://www.geocities.com/raviratlami/"
+
 #: kde-qt-common/EditWidget.cpp:43
 msgid "Select..."
 msgstr "चुनें..."
@@ -22,8 +34,8 @@ msgid ""
 "You can edit the lilo.conf file directly here. All changes you make here are "
 "automatically transferred to the graphical interface."
 msgstr ""
-"आप यहाँ सीधे ही lilo.conf फ़ाइल को संपादित कर सकते हैं. सभी परिवर्तन जो आप यहाँ "
-"करेंगे वे चित्रमय इंटरफेस पर स्वचलित स्थानांतरित हो जाएँगे."
+"आप यहाँ सीधे ही lilo.conf फ़ाइल को संपादित कर सकते हैं. सभी परिवर्तन जो आप यहाँ करेंगे वे "
+"चित्रमय इंटरफेस पर स्वचलित स्थानांतरित हो जाएँगे."
 
 #: kde-qt-common/general.cpp:45
 msgid "Install &boot record to drive/partition:"
@@ -31,17 +43,15 @@ msgstr "ड्राइव/पार्टीशन पर बूट रेक�
 
 #: kde-qt-common/general.cpp:55
 msgid ""
-"Select the drive or partition you want to install the LILO boot loader to here. "
-"Unless you intend to use other boot managers in addition to LILO, this should "
-"be the MBR (master boot record) of your boot drive."
-"<br>In this case, you should probably select <i>/dev/hda</i> "
-"if your boot drive is an IDE drive or <i>/dev/sda</i> "
-"if your boot drive is SCSI."
+"Select the drive or partition you want to install the LILO boot loader to "
+"here. Unless you intend to use other boot managers in addition to LILO, this "
+"should be the MBR (master boot record) of your boot drive.<br>In this case, "
+"you should probably select <i>/dev/hda</i> if your boot drive is an IDE "
+"drive or <i>/dev/sda</i> if your boot drive is SCSI."
 msgstr ""
-"लिलो बूट लोडर यहाँ संस्थापित करने के लिए ड्राइव या पार्टीशन चुनें. जब तक आपका "
-"मंतव्य लिलो के अतिरिक्त अन्य बूट प्रबंधकों के उपयोग का नहीं है, यह आपके बूट "
-"ड्राइव का एमबीआर (मास्टर बूट रेकॉर्ड) होना चाहिए."
-"<br>यदि ऐसा है, संभवतः आपको चुनना चाहिए <i>/dev/hda</i> "
+"लिलो बूट लोडर यहाँ संस्थापित करने के लिए ड्राइव या पार्टीशन चुनें. जब तक आपका मंतव्य लिलो "
+"के अतिरिक्त अन्य बूट प्रबंधकों के उपयोग का नहीं है, यह आपके बूट ड्राइव का एमबीआर (मास्टर "
+"बूट रेकॉर्ड) होना चाहिए.<br>यदि ऐसा है, संभवतः आपको चुनना चाहिए <i>/dev/hda</i> "
 "यदि आपका ड्राइव आईडीई ड्राइव है या <i>/dev/sda</i> यदि आपका ड्राइव स्कसी है."
 
 #: kde-qt-common/general.cpp:58
@@ -54,11 +64,11 @@ msgstr "/10 सेकण्ड"
 
 #: kde-qt-common/general.cpp:64
 msgid ""
-"LILO will wait the amount of time specified here before booting the kernel (or "
-"OS) marked as <i>default</i> in the <b>Images</b> tab."
+"LILO will wait the amount of time specified here before booting the kernel "
+"(or OS) marked as <i>default</i> in the <b>Images</b> tab."
 msgstr ""
-"कर्नेल (या ओएस) जो कि तारांकित है <i>डिफ़ॉल्ट</i> रूप में <b>इमेजेस</b> "
-"टैब में, उसे बूट करने से पहले लिलो उल्लेखित समय तक इंतजार करेगा."
+"कर्नेल (या ओएस) जो कि तारांकित है <i>डिफ़ॉल्ट</i> रूप में <b>इमेजेस</b> टैब में, उसे बूट करने "
+"से पहले लिलो उल्लेखित समय तक इंतजार करेगा."
 
 #: kde-qt-common/general.cpp:67
 msgid "Use &linear mode"
@@ -66,12 +76,11 @@ msgstr "लीनियर मोड इस्तेमाल करें (&l)"
 
 #: kde-qt-common/general.cpp:69
 msgid ""
-"Check this box if you want to use the linear mode."
-"<br>Linear mode tells the boot loader the location of kernels in linear "
-"addressing rather than sector/head/cylinder."
-"<br>linear mode is required for some SCSI drives, and shouldn't hurt unless "
-"you're planning to create a boot disk to be used with a different computer."
-"<br>See the lilo.conf man page for details."
+"Check this box if you want to use the linear mode.<br>Linear mode tells the "
+"boot loader the location of kernels in linear addressing rather than sector/"
+"head/cylinder.<br>linear mode is required for some SCSI drives, and "
+"shouldn't hurt unless you're planning to create a boot disk to be used with "
+"a different computer.<br>See the lilo.conf man page for details."
 msgstr ""
 
 #: kde-qt-common/general.cpp:70
@@ -80,10 +89,10 @@ msgstr "कॉम्पेक्ट मोड इस्तेमाल करे
 
 #: kde-qt-common/general.cpp:72
 msgid ""
-"Check this box if you want to use the compact mode."
-"<br>The compact mode tries to merge read requests for adjacent sectors into a "
-"single read request. This reduces load time and keeps the boot map smaller, but "
-"will not work on all systems."
+"Check this box if you want to use the compact mode.<br>The compact mode "
+"tries to merge read requests for adjacent sectors into a single read "
+"request. This reduces load time and keeps the boot map smaller, but will not "
+"work on all systems."
 msgstr ""
 
 #: kde-qt-common/general.cpp:76 kde/Details.cpp:82 qt/Details.cpp:85
@@ -93,8 +102,8 @@ msgstr "डिफ़ॉल्ट के लिए बूट कमांड प�
 #: kde-qt-common/general.cpp:78
 msgid ""
 "Checking this box enables automatic recording of boot command lines as the "
-"defaults for the following boots. This way, lilo \"locks\" on a choice until it "
-"is manually overridden.\n"
+"defaults for the following boots. This way, lilo \"locks\" on a choice until "
+"it is manually overridden.\n"
 "This sets the <b>lock</b> option in lilo.conf."
 msgstr ""
 
@@ -105,12 +114,11 @@ msgstr "पैमाने सीमित करेंीटर्स (&e)"
 #: kde-qt-common/general.cpp:82
 msgid ""
 "If this box is checked, a password (entered below) is required only if any "
-"parameters are changed (i.e. the user can boot <i>linux</i>, but not <i>"
-"linux single</i> or <i>linux init=/bin/sh</i>).\n"
-"This sets the <b>restricted</b> option in lilo.conf."
-"<br>This sets a default for all Linux kernels you want to boot. If you need a "
-"per-kernel setting, go to the <i>Operating systems</i> tab and select <i>"
-"Details</i>."
+"parameters are changed (i.e. the user can boot <i>linux</i>, but not "
+"<i>linux single</i> or <i>linux init=/bin/sh</i>).\n"
+"This sets the <b>restricted</b> option in lilo.conf.<br>This sets a default "
+"for all Linux kernels you want to boot. If you need a per-kernel setting, go "
+"to the <i>Operating systems</i> tab and select <i>Details</i>."
 msgstr ""
 
 #: kde-qt-common/general.cpp:86 kde/Details.cpp:89 qt/Details.cpp:93
@@ -123,10 +131,9 @@ msgid ""
 "above is checked, the password is required for additional parameters only."
 "<br><b>WARNING:</b> The password is stored in clear text in /etc/lilo.conf. "
 "You'll want to make sure nobody untrusted can read this file. Also, you "
-"probably don't want to use your normal/root password here."
-"<br>This sets a default for all Linux kernels you want to boot. If you need a "
-"per-kernel setting, go to the <i>Operating systems</i> tab and select <i>"
-"Details</i>."
+"probably don't want to use your normal/root password here.<br>This sets a "
+"default for all Linux kernels you want to boot. If you need a per-kernel "
+"setting, go to the <i>Operating systems</i> tab and select <i>Details</i>."
 msgstr ""
 
 #: kde-qt-common/general.cpp:97
@@ -135,13 +142,12 @@ msgstr "पाठ कंसोल पर डिफ़ॉल्ट ग्रा�
 
 #: kde-qt-common/general.cpp:100
 msgid ""
-"You can select the default graphics mode here."
-"<br>If you intend to use a VGA graphics mode, you must compile the kernel with "
-"support for framebuffer devices. The <i>ask</i> setting brings up a prompt at "
-"boot time."
-"<br>This sets a default for all Linux kernels you want to boot. If you need a "
-"per-kernel setting, go to the <i>Operating systems</i> tab and select <i>"
-"Details</i>."
+"You can select the default graphics mode here.<br>If you intend to use a VGA "
+"graphics mode, you must compile the kernel with support for framebuffer "
+"devices. The <i>ask</i> setting brings up a prompt at boot time.<br>This "
+"sets a default for all Linux kernels you want to boot. If you need a per-"
+"kernel setting, go to the <i>Operating systems</i> tab and select "
+"<i>Details</i>."
 msgstr ""
 
 #: kde-qt-common/general.cpp:101 kde/Details.cpp:48 qt/Details.cpp:48
@@ -256,8 +262,8 @@ msgstr "लिलो प्राम्प्ट स्वचलित प्र
 msgid ""
 "If this box is checked, LILO goes to the LILO prompt whether or not a key is "
 "pressed. If it is turned off, LILO boots the default operating system unless "
-"shift is pressed (in that case, it goes to the LILO prompt)."
-"<br>This sets the <i>prompt</i> option in lilo.conf."
+"shift is pressed (in that case, it goes to the LILO prompt).<br>This sets "
+"the <i>prompt</i> option in lilo.conf."
 msgstr ""
 
 #: kde-qt-common/images.cpp:53
@@ -265,8 +271,8 @@ msgid ""
 "This is the list of kernels and operating systems you can currently boot. "
 "Select which one you want to edit here."
 msgstr ""
-"यह कर्नेल्स तथा ऑपरेटिंग सिस्टम्स की सूची है जिसमें आप वर्तमान में बूट कर सकते "
-"हैं. जिसे आप संपादित करना चाहते हैं उसे चुनें."
+"यह कर्नेल्स तथा ऑपरेटिंग सिस्टम्स की सूची है जिसमें आप वर्तमान में बूट कर सकते हैं. जिसे आप "
+"संपादित करना चाहते हैं उसे चुनें."
 
 #: kde-qt-common/images.cpp:59 kde-qt-common/images.cpp:281
 msgid "&Kernel:"
@@ -291,11 +297,11 @@ msgstr "रूट फ़ाइल सिस्टमः (&R)"
 
 #: kde-qt-common/images.cpp:66 kde-qt-common/images.cpp:189
 msgid ""
-"Enter the root filesystem (i.e. the partition that will be mounted as / at boot "
-"time) for the kernel you want to boot here."
+"Enter the root filesystem (i.e. the partition that will be mounted as / at "
+"boot time) for the kernel you want to boot here."
 msgstr ""
-"जिस कर्नेल को बूट करना चाहते हैं उस के लिए यहाँ उसका रूट फ़ाइल सिस्टम (यानी "
-"पार्टीशन जो बूट समय पर /  के रूप में माउंट होगा)  भरें."
+"जिस कर्नेल को बूट करना चाहते हैं उस के लिए यहाँ उसका रूट फ़ाइल सिस्टम (यानी पार्टीशन जो "
+"बूट समय पर /  के रूप में माउंट होगा)  भरें."
 
 #: kde-qt-common/images.cpp:68 kde-qt-common/images.cpp:190
 msgid "&Initial ramdisk:"
@@ -307,9 +313,9 @@ msgid ""
 "filename here. Leave this field blank if you don't intend to use an initial "
 "ramdisk for this kernel."
 msgstr ""
-"यदि आप इस कर्नेल के लिए प्रारंभिक रैमडिस्क (initrd) उपयोग करना चाहते हैं तो "
-"इसका फ़ाइलनाम यहाँ भरें. इस फील्ड को खाली रहने दें यदि आप इस कर्नेल के लिए "
-"प्रारंभिक रैम डिस्क का उपयोग नहीं चाहते हैं."
+"यदि आप इस कर्नेल के लिए प्रारंभिक रैमडिस्क (initrd) उपयोग करना चाहते हैं तो इसका "
+"फ़ाइलनाम यहाँ भरें. इस फील्ड को खाली रहने दें यदि आप इस कर्नेल के लिए प्रारंभिक रैम डिस्क "
+"का उपयोग नहीं चाहते हैं."
 
 #: kde-qt-common/images.cpp:71
 msgid "E&xtra parameters:"
@@ -317,9 +323,8 @@ msgstr "अतिरिक्त पैरामीटर्स (&x)"
 
 #: kde-qt-common/images.cpp:72
 msgid ""
-"Enter any extra parameters you wish to pass to the kernel here. Usually, this "
-"can be left blank."
-"<br>This sets the <i>append</i> option in lilo.conf."
+"Enter any extra parameters you wish to pass to the kernel here. Usually, "
+"this can be left blank.<br>This sets the <i>append</i> option in lilo.conf."
 msgstr ""
 
 #: kde-qt-common/images.cpp:79
@@ -338,8 +343,7 @@ msgstr "विवरण (&t)"
 msgid ""
 "This button brings up a dialog box with further, less commonly used, options."
 msgstr ""
-"अतिरिक्त, सामान्यतः कम उपयोग में आने वाले विकल्पों के संवाद बक्सों को यह बटन "
-"लाता है."
+"अतिरिक्त, सामान्यतः कम उपयोग में आने वाले विकल्पों के संवाद बक्सों को यह बटन लाता है."
 
 #: kde-qt-common/images.cpp:85
 msgid "&Probe"
@@ -348,8 +352,7 @@ msgstr "जाँच (&P)"
 #: kde-qt-common/images.cpp:87
 msgid ""
 "Automatically generate a (hopefully) reasonable lilo.conf for your system"
-msgstr ""
-"आपके तंत्र के लिए एक यथोचित lilo.conf स्वचलित तैयार करता है (उम्मीद तो है)"
+msgstr "आपके तंत्र के लिए एक यथोचित lilo.conf स्वचलित तैयार करता है (उम्मीद तो है)"
 
 #: kde-qt-common/images.cpp:88
 msgid "&Check Configuration"
@@ -384,20 +387,16 @@ msgid "Remove entry from the boot menu"
 msgstr "बूट मेन्यू में से प्रविष्टि हटाएँ"
 
 #: kde-qt-common/images.cpp:177
-msgid ""
-"Configuration ok. LILO said:\n"
-msgstr ""
-"कॉन्फ़िगरेशन ठीक है. लिलो कहता है:\n"
+msgid "Configuration ok. LILO said:\n"
+msgstr "कॉन्फ़िगरेशन ठीक है. लिलो कहता है:\n"
 
 #: kde-qt-common/images.cpp:178
 msgid "Configuration OK"
 msgstr "कॉन्फ़िगरेशन ठीक"
 
 #: kde-qt-common/images.cpp:180
-msgid ""
-"Configuration NOT ok. LILO said:\n"
-msgstr ""
-"कॉन्फ़िगरेशन ठीक नहीं है. लिलो कहता है:\n"
+msgid "Configuration NOT ok. LILO said:\n"
+msgstr "कॉन्फ़िगरेशन ठीक नहीं है. लिलो कहता है:\n"
 
 #: kde-qt-common/images.cpp:181
 msgid "Configuration NOT ok"
@@ -451,10 +450,9 @@ msgstr "पाठ कंसोल पर ग्राफिक मोडः (&G)
 
 #: kde/Details.cpp:47 qt/Details.cpp:47
 msgid ""
-"You can select the graphics mode for this kernel here."
-"<br>If you intend to use a VGA graphics mode, you must compile the kernel with "
-"support for framebuffer devices. The <i>ask</i> setting brings up a prompt at "
-"boot time."
+"You can select the graphics mode for this kernel here.<br>If you intend to "
+"use a VGA graphics mode, you must compile the kernel with support for "
+"framebuffer devices. The <i>ask</i> setting brings up a prompt at boot time."
 msgstr ""
 
 #: kde/Details.cpp:75 qt/Details.cpp:76
@@ -464,9 +462,9 @@ msgstr "रूट फ़ाइल सिस्टम सिर्फ पढ़�
 #: kde/Details.cpp:76 qt/Details.cpp:77
 msgid ""
 "Mount the root filesystem for this kernel read-only. Since the init scripts "
-"normally take care of remounting the root filesystem in read-write mode after "
-"running some checks, this should always be turned on."
-"<br>Don't turn this off unless you know what you're doing."
+"normally take care of remounting the root filesystem in read-write mode "
+"after running some checks, this should always be turned on.<br>Don't turn "
+"this off unless you know what you're doing."
 msgstr ""
 
 #: kde/Details.cpp:78 qt/Details.cpp:80
@@ -476,26 +474,26 @@ msgstr "पार्टीशन टेबल नहीं जाँचें (&
 
 #: kde/Details.cpp:79
 msgid ""
-"This turns off some sanity checks while writing the configuration. This should "
-"not be used under \"normal\" circumstances, but it can be useful, for example, "
-"by providing the capability of booting from a floppy disk, without having a "
-"floppy in the drive every time you run lilo."
-"<br>This sets the <i>unsafe</i> keyword in lilo.conf."
+"This turns off some sanity checks while writing the configuration. This "
+"should not be used under \"normal\" circumstances, but it can be useful, for "
+"example, by providing the capability of booting from a floppy disk, without "
+"having a floppy in the drive every time you run lilo.<br>This sets the "
+"<i>unsafe</i> keyword in lilo.conf."
 msgstr ""
 
 #: kde/Details.cpp:83 qt/Details.cpp:86
 msgid ""
 "Checking this box enables automatic recording of boot command lines as the "
-"default for the following bootups. This way, lilo \"locks\" on a choice until "
-"it is manually overridden."
-"<br>This sets the <b>lock</b> option in lilo.conf"
+"default for the following bootups. This way, lilo \"locks\" on a choice "
+"until it is manually overridden.<br>This sets the <b>lock</b> option in lilo."
+"conf"
 msgstr ""
 
 #: kde/Details.cpp:86 qt/Details.cpp:89
 msgid ""
 "If this box is checked, a password (entered below) is required only if any "
-"parameters are changed (i.e. the user can boot <i>linux</i>, but not <i>"
-"linux single</i> or <i>linux init=/bin/sh</i>).\n"
+"parameters are changed (i.e. the user can boot <i>linux</i>, but not "
+"<i>linux single</i> or <i>linux init=/bin/sh</i>).\n"
 "This sets the <b>restricted</b> option in lilo.conf."
 msgstr ""
 
@@ -523,10 +521,19 @@ msgstr "(c) 2000, बर्नहार्ड रॉसेनक्राएन�
 #: qt/Details.cpp:81
 msgid ""
 "This turns off some sanity checks while writing the configuration. This "
-"shouldn't be used under \"normal\" circumstances, but it's useful, for example, "
-"for installing the possibility to boot from a floppy disk without having a "
-"floppy in the drive every time you run lilo."
-"<br>This sets the <i>unsafe</i> keyword in lilo.conf."
+"shouldn't be used under \"normal\" circumstances, but it's useful, for "
+"example, for installing the possibility to boot from a floppy disk without "
+"having a floppy in the drive every time you run lilo.<br>This sets the "
+"<i>unsafe</i> keyword in lilo.conf."
+msgstr ""
+
+#: qt/Details.cpp:102 qt/InputBox.cpp:47 qt/InputBox.cpp:52
+#: qt/standalone.cpp:58
+msgid "&OK"
+msgstr ""
+
+#: qt/Details.cpp:103 qt/InputBox.cpp:48 qt/standalone.cpp:61
+msgid "&Cancel"
 msgstr ""
 
 #: qt/standalone.cpp:41
@@ -537,19 +544,23 @@ msgstr "यह क्या है? (&W)"
 #: qt/standalone.cpp:43
 #, fuzzy
 msgid ""
-"The <i>What's This?</i> button is part of this program's help system. Click on "
-"the What's This? button then on any widget in the window to get information "
-"(like this) on it."
+"The <i>What's This?</i> button is part of this program's help system. Click "
+"on the What's This? button then on any widget in the window to get "
+"information (like this) on it."
+msgstr ""
+" <i>यह क्या है?</i> बटन प्रोग्राम के सहायता तंत्र का भाग है. यह क्या है बटन पर क्लिक करें "
+"फिर विंडो के किसी भी विज़ेट पर क्लिक करें तो आपको उसके बारे में जानकारी प्राप्त होगी (जैसे "
+"कि यह)"
+
+#: qt/standalone.cpp:45
+msgid "&Help"
 msgstr ""
-" <i>यह क्या है?</i> बटन प्रोग्राम के सहायता तंत्र का भाग है. यह क्या है बटन पर "
-"क्लिक करें फिर विंडो के किसी भी विज़ेट पर क्लिक करें तो आपको उसके बारे में "
-"जानकारी प्राप्त होगी (जैसे कि यह)"
 
 #: qt/standalone.cpp:47
 msgid ""
-"This button calls up the program's online help system. If it does nothing, no "
-"help file has been written (yet); in that case, use the <i>What's This</i> "
-"button on the left."
+"This button calls up the program's online help system. If it does nothing, "
+"no help file has been written (yet); in that case, use the <i>What's This</"
+"i> button on the left."
 msgstr ""
 
 #: qt/standalone.cpp:49
@@ -559,8 +570,7 @@ msgstr "डिफ़ॉल्ट (&D)"
 #: qt/standalone.cpp:50
 msgid ""
 "This button resets all parameters to some (hopefully sane) default values."
-msgstr ""
-"यह बटन सभी पैरामीटर्स को (आशा है कि गंभीरता से) डिफ़ॉल्ट मान पर रीसेट करता है."
+msgstr "यह बटन सभी पैरामीटर्स को (आशा है कि गंभीरता से) डिफ़ॉल्ट मान पर रीसेट करता है."
 
 #: qt/standalone.cpp:52
 msgid "&Reset"
@@ -571,8 +581,12 @@ msgid ""
 "This button resets all parameters to what they were before you started the "
 "program."
 msgstr ""
-"यह बटन सभी पैरामीटर्स को उस पहले की स्थिति में रीसेट करता है जब आपने प्रोग्राम "
-"प्रारंभ किया था."
+"यह बटन सभी पैरामीटर्स को उस पहले की स्थिति में रीसेट करता है जब आपने प्रोग्राम प्रारंभ "
+"किया था."
+
+#: qt/standalone.cpp:55
+msgid "&Apply"
+msgstr ""
 
 #: qt/standalone.cpp:56
 msgid "This button saves all your changes without exiting."
@@ -580,21 +594,8 @@ msgstr "यह बटन आपके सभी परिवर्तनों �
 
 #: qt/standalone.cpp:59
 msgid "This button saves all your changes and exits the program."
-msgstr ""
-"यह बटन आपके सभी परिवर्तनों को सहेजता है तथा प्रोग्राम को बाहर कर देता है."
+msgstr "यह बटन आपके सभी परिवर्तनों को सहेजता है तथा प्रोग्राम को बाहर कर देता है."
 
 #: qt/standalone.cpp:62
 msgid "This button exits the program without saving your changes."
 msgstr "यह बटन आपके परिवर्तन को सहेजे बगैर प्रोग्राम को बाहर कर देता है."
-
-#: _translatorinfo.cpp:1
-msgid ""
-"_: NAME OF TRANSLATORS\n"
-"Your names"
-msgstr " रविशंकर श्रीवास्तव "
-
-#: _translatorinfo.cpp:3
-msgid ""
-"_: EMAIL OF TRANSLATORS\n"
-"Your emails"
-msgstr "raviratlami@yahoo.com , http://www.geocities.com/raviratlami/"