Second part of prior commit

9 files changed, 5984 insertions, 0 deletions

diff --git a/tde-i18n-zh_TW/messages/tdeaccessibility/Makefile.am b/tde-i18n-zh_TW/messages/tdeaccessibility/Makefile.am
new file mode 100644
index 00000000000..c37fe4d9a66
--- /dev/null
+++ b/tde-i18n-zh_TW/messages/tdeaccessibility/Makefile.am
@@ -0,0 +1,3 @@
+KDE_LANG = zh_TW
+SUBDIRS = $(AUTODIRS)
+POFILES = AUTO
diff --git a/tde-i18n-zh_TW/messages/tdeaccessibility/Makefile.in b/tde-i18n-zh_TW/messages/tdeaccessibility/Makefile.in
new file mode 100644
index 00000000000..fe03f663b6b
--- /dev/null
+++ b/tde-i18n-zh_TW/messages/tdeaccessibility/Makefile.in
@@ -0,0 +1,659 @@
+# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# KDE tags expanded automatically by am_edit - $Revision: 483858 $ 
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = messages/tdeaccessibility
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
+	$(top_srcdir)/configure.in
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+#>- RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+#>- 	html-recursive info-recursive install-data-recursive \
+#>- 	install-dvi-recursive install-exec-recursive \
+#>- 	install-html-recursive install-info-recursive \
+#>- 	install-pdf-recursive install-ps-recursive install-recursive \
+#>- 	installcheck-recursive installdirs-recursive pdf-recursive \
+#>- 	ps-recursive uninstall-recursive
+#>+ 7
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+	html-recursive info-recursive install-data-recursive \
+	install-dvi-recursive install-exec-recursive \
+	install-html-recursive install-info-recursive \
+	install-pdf-recursive install-ps-recursive install-recursive \
+	installcheck-recursive installdirs-recursive pdf-recursive \
+	ps-recursive uninstall-recursive nmcheck-recursive bcheck-recursive
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
+  distclean-recursive maintainer-clean-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+#>- DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+#>+ 1
+#>- DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) $(KDE_DIST)
+#>+ 1
+DISTFILES = $(GMOFILES) $(POFILES) $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) $(KDE_DIST)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+ARTSCCONFIG = @ARTSCCONFIG@
+AUTOCONF = @AUTOCONF@
+AUTODIRS = @AUTODIRS@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CONF_FILES = @CONF_FILES@
+CYGPATH_W = @CYGPATH_W@
+DCOPIDL = @DCOPIDL@
+DCOPIDL2CPP = @DCOPIDL2CPP@
+DCOPIDLNG = @DCOPIDLNG@
+DCOP_DEPENDENCIES = @DCOP_DEPENDENCIES@
+DEFS = @DEFS@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+GMSGFMT = @GMSGFMT@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+KCFG_DEPENDENCIES = @KCFG_DEPENDENCIES@
+KCONFIG_COMPILER = @KCONFIG_COMPILER@
+KDECONFIG = @KDECONFIG@
+KDE_EXTRA_RPATH = @KDE_EXTRA_RPATH@
+KDE_RPATH = @KDE_RPATH@
+KDE_XSL_STYLESHEET = @KDE_XSL_STYLESHEET@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+MAKEKDEWIDGETS = @MAKEKDEWIDGETS@
+MCOPIDL = @MCOPIDL@
+MEINPROC = @MEINPROC@
+MKDIR_P = @MKDIR_P@
+MSGFMT = @MSGFMT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+TOPSUBDIRS = @TOPSUBDIRS@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+XMLLINT = @XMLLINT@
+X_RPATH = @X_RPATH@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+am__leading_dot = @am__leading_dot@
+am__tar = @am__tar@
+am__untar = @am__untar@
+#>- bindir = @bindir@
+#>+ 2
+DEPDIR = .deps
+bindir = @bindir@
+build_alias = @build_alias@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host_alias = @host_alias@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+kde_appsdir = @kde_appsdir@
+kde_bindir = @kde_bindir@
+kde_confdir = @kde_confdir@
+kde_datadir = @kde_datadir@
+kde_htmldir = @kde_htmldir@
+kde_icondir = @kde_icondir@
+kde_kcfgdir = @kde_kcfgdir@
+kde_libs_htmldir = @kde_libs_htmldir@
+kde_libs_prefix = @kde_libs_prefix@
+kde_locale = @kde_locale@
+kde_mimedir = @kde_mimedir@
+kde_moduledir = @kde_moduledir@
+kde_servicesdir = @kde_servicesdir@
+kde_servicetypesdir = @kde_servicetypesdir@
+kde_sounddir = @kde_sounddir@
+kde_styledir = @kde_styledir@
+kde_templatesdir = @kde_templatesdir@
+kde_wallpaperdir = @kde_wallpaperdir@
+kde_widgetdir = @kde_widgetdir@
+tdeinitdir = @tdeinitdir@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+xdg_appsdir = @xdg_appsdir@
+xdg_directorydir = @xdg_directorydir@
+xdg_menudir = @xdg_menudir@
+KDE_LANG = zh_TW
+#>- SUBDIRS = $(AUTODIRS)
+#>+ 1
+SUBDIRS =.
+#>- POFILES = AUTO
+#>+ 2
+POFILES = kmousetool.po kmag.po libKTTSD.po kbstateapplet.po ksayit.po kmouth.po kttsd.po
+GMOFILES = kmousetool.gmo kmag.gmo libKTTSD.gmo kbstateapplet.gmo ksayit.gmo kmouth.gmo kttsd.gmo
+#>- all: all-recursive
+#>+ 1
+all: all-nls docs-am  all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+#>- 	@for dep in $?; do \
+#>- 	  case '$(am__configure_deps)' in \
+#>- 	    *$$dep*) \
+#>- 	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+#>- 		&& exit 0; \
+#>- 	      exit 1;; \
+#>- 	  esac; \
+#>- 	done; \
+#>- 	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  messages/tdeaccessibility/Makefile'; \
+#>- 	cd $(top_srcdir) && \
+#>- 	  $(AUTOMAKE) --gnu  messages/tdeaccessibility/Makefile
+#>+ 12
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  messages/tdeaccessibility/Makefile'; \
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu  messages/tdeaccessibility/Makefile
+	cd $(top_srcdir) && perl ../scripts/admin/am_edit -p../scripts/admin messages/tdeaccessibility/Makefile.in
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+#     (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+	@failcom='exit 1'; \
+	for f in x $$MAKEFLAGS; do \
+	  case $$f in \
+	    *=* | --[!k]*);; \
+	    *k*) failcom='fail=yes';; \
+	  esac; \
+	done; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  || eval $$failcom; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+$(RECURSIVE_CLEAN_TARGETS):
+	@failcom='exit 1'; \
+	for f in x $$MAKEFLAGS; do \
+	  case $$f in \
+	    *=* | --[!k]*);; \
+	    *k*) failcom='fail=yes';; \
+	  esac; \
+	done; \
+	dot_seen=no; \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	rev=''; for subdir in $$list; do \
+	  if test "$$subdir" = "."; then :; else \
+	    rev="$$subdir $$rev"; \
+	  fi; \
+	done; \
+	rev="$$rev ."; \
+	target=`echo $@ | sed s/-recursive//`; \
+	for subdir in $$rev; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  || eval $$failcom; \
+	done && test -z "$$fail"
+tags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	done
+ctags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+	done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+	  include_option=--etags-include; \
+	  empty_fix=.; \
+	else \
+	  include_option=--include; \
+	  empty_fix=; \
+	fi; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test ! -f $$subdir/TAGS || \
+	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+	  fi; \
+	done; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	    $$tags $$unique; \
+	fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$tags $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && cd $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+#>- distdir: $(DISTFILES)
+#>+ 1
+distdir: distdir-nls  $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test -d "$(distdir)/$$subdir" \
+	    || $(MKDIR_P) "$(distdir)/$$subdir" \
+	    || exit 1; \
+	    distdir=`$(am__cd) $(distdir) && pwd`; \
+	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+	    (cd $$subdir && \
+	      $(MAKE) $(AM_MAKEFLAGS) \
+	        top_distdir="$$top_distdir" \
+	        distdir="$$distdir/$$subdir" \
+		am__remove_distdir=: \
+		am__skip_length_check=: \
+	        distdir) \
+	      || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+#>- uninstall: uninstall-recursive
+#>+ 1
+uninstall: uninstall-nls  uninstall-recursive
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+#>- clean: clean-recursive
+#>+ 1
+clean: kde-rpo-clean  clean-recursive
+
+#>- clean-am: clean-generic mostlyclean-am
+#>+ 1
+clean-am: clean-bcheck  clean-generic mostlyclean-am
+
+distclean: distclean-recursive
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+#>- install-data-am:
+#>+ 1
+install-data-am: install-nls 
+
+install-dvi: install-dvi-recursive
+
+install-exec-am:
+
+install-html: install-html-recursive
+
+install-info: install-info-recursive
+
+install-man:
+
+install-pdf: install-pdf-recursive
+
+install-ps: install-ps-recursive
+
+installcheck-am:
+
+#>- maintainer-clean: maintainer-clean-recursive
+#>+ 1
+maintainer-clean: clean-nls  maintainer-clean-recursive
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
+	install-strip
+
+.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
+	all all-am check check-am clean clean-generic ctags \
+	ctags-recursive distclean distclean-generic distclean-tags \
+	distdir dvi dvi-am html html-am info info-am install \
+	install-am install-data install-data-am install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am install-man \
+	install-pdf install-pdf-am install-ps install-ps-am \
+	install-strip installcheck installcheck-am installdirs \
+	installdirs-am maintainer-clean maintainer-clean-generic \
+	mostlyclean mostlyclean-generic pdf pdf-am ps ps-am tags \
+	tags-recursive uninstall uninstall-am
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
+
+#>+ 2
+KDE_DIST=kttsd.po kbstateapplet.po Makefile.in ksayit.po kmouth.po kmousetool.po libKTTSD.po Makefile.am kmag.po 
+
+#>+ 22
+kmousetool.gmo: kmousetool.po
+	rm -f kmousetool.gmo; $(GMSGFMT) -o kmousetool.gmo $(srcdir)/kmousetool.po
+	test ! -f kmousetool.gmo || touch kmousetool.gmo
+kmag.gmo: kmag.po
+	rm -f kmag.gmo; $(GMSGFMT) -o kmag.gmo $(srcdir)/kmag.po
+	test ! -f kmag.gmo || touch kmag.gmo
+libKTTSD.gmo: libKTTSD.po
+	rm -f libKTTSD.gmo; $(GMSGFMT) -o libKTTSD.gmo $(srcdir)/libKTTSD.po
+	test ! -f libKTTSD.gmo || touch libKTTSD.gmo
+kbstateapplet.gmo: kbstateapplet.po
+	rm -f kbstateapplet.gmo; $(GMSGFMT) -o kbstateapplet.gmo $(srcdir)/kbstateapplet.po
+	test ! -f kbstateapplet.gmo || touch kbstateapplet.gmo
+ksayit.gmo: ksayit.po
+	rm -f ksayit.gmo; $(GMSGFMT) -o ksayit.gmo $(srcdir)/ksayit.po
+	test ! -f ksayit.gmo || touch ksayit.gmo
+kmouth.gmo: kmouth.po
+	rm -f kmouth.gmo; $(GMSGFMT) -o kmouth.gmo $(srcdir)/kmouth.po
+	test ! -f kmouth.gmo || touch kmouth.gmo
+kttsd.gmo: kttsd.po
+	rm -f kttsd.gmo; $(GMSGFMT) -o kttsd.gmo $(srcdir)/kttsd.po
+	test ! -f kttsd.gmo || touch kttsd.gmo
+
+#>+ 3
+clean-nls:
+	-rm -f  kmousetool.gmo kmag.gmo libKTTSD.gmo kbstateapplet.gmo ksayit.gmo kmouth.gmo kttsd.gmo
+
+#>+ 10
+install-nls:
+	$(mkinstalldirs) $(DESTDIR)$(kde_locale)/$(KDE_LANG)/LC_MESSAGES
+	@for base in kmousetool kmag libKTTSD kbstateapplet ksayit kmouth kttsd ; do \
+	  echo $(INSTALL_DATA) $$base.gmo $(DESTDIR)$(kde_locale)/$(KDE_LANG)/LC_MESSAGES/$$base.mo ;\
+	  if test -f $$base.gmo; then $(INSTALL_DATA) $$base.gmo $(DESTDIR)$(kde_locale)/$(KDE_LANG)/LC_MESSAGES/$$base.mo ;\
+	  elif test -f $(srcdir)/$$base.gmo; then $(INSTALL_DATA) $(srcdir)/$$base.gmo $(DESTDIR)$(kde_locale)/$(KDE_LANG)/LC_MESSAGES/$$base.mo ;\
+	  fi ;\
+	done
+
+
+#>+ 9
+uninstall-nls:
+	rm -f $(DESTDIR)$(kde_locale)/$(KDE_LANG)/LC_MESSAGES/kmousetool.mo
+	rm -f $(DESTDIR)$(kde_locale)/$(KDE_LANG)/LC_MESSAGES/kmag.mo
+	rm -f $(DESTDIR)$(kde_locale)/$(KDE_LANG)/LC_MESSAGES/libKTTSD.mo
+	rm -f $(DESTDIR)$(kde_locale)/$(KDE_LANG)/LC_MESSAGES/kbstateapplet.mo
+	rm -f $(DESTDIR)$(kde_locale)/$(KDE_LANG)/LC_MESSAGES/ksayit.mo
+	rm -f $(DESTDIR)$(kde_locale)/$(KDE_LANG)/LC_MESSAGES/kmouth.mo
+	rm -f $(DESTDIR)$(kde_locale)/$(KDE_LANG)/LC_MESSAGES/kttsd.mo
+
+#>+ 2
+all-nls: $(GMOFILES)
+
+#>+ 8
+distdir-nls:$(GMOFILES)
+	for file in $(POFILES); do \
+	  cp $(srcdir)/$$file $(distdir); \
+	done
+	for file in $(GMOFILES); do \
+	  cp $(srcdir)/$$file $(distdir); \
+	done
+
+#>+ 2
+docs-am:
+
+#>+ 15
+force-reedit:
+		@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  messages/tdeaccessibility/Makefile'; \
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu  messages/tdeaccessibility/Makefile
+	cd $(top_srcdir) && perl ../scripts/admin/am_edit -p../scripts/admin messages/tdeaccessibility/Makefile.in
+
+
+#>+ 21
+clean-bcheck: 
+	rm -f *.bchecktest.cc *.bchecktest.cc.class a.out
+
+bcheck: bcheck-recursive
+
+bcheck-am:
+	@for i in ; do \
+	    if test $(srcdir)/$$i -nt $$i.bchecktest.cc; then \
+	        echo "int main() {return 0;}" > $$i.bchecktest.cc ; \
+	        echo "#include \"$$i\"" >> $$i.bchecktest.cc ; \
+	        echo "$$i"; \
+	        if ! $(CXX) $(DEFS) -I. -I$(srcdir) -I$(top_builddir) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(CXXFLAGS) $(KDE_CXXFLAGS)  --dump-class-hierarchy -c $$i.bchecktest.cc; then \
+	            rm -f $$i.bchecktest.cc; exit 1; \
+	        fi ; \
+	        echo "" >> $$i.bchecktest.cc.class; \
+	        perl $(top_srcdir)/admin/bcheck.pl $$i.bchecktest.cc.class || { rm -f $$i.bchecktest.cc; exit 1; }; \
+	        rm -f a.out; \
+	    fi ; \
+	done
+
+
+#>+ 3
+final:
+	$(MAKE) all-am
+
+#>+ 3
+final-install:
+	$(MAKE) install-am
+
+#>+ 3
+no-final:
+	$(MAKE) all-am
+
+#>+ 3
+no-final-install:
+	$(MAKE) install-am
+
+#>+ 3
+kde-rpo-clean:
+	-rm -f *.rpo
+
+#>+ 3
+nmcheck: 
+nmcheck-am: nmcheck
diff --git a/tde-i18n-zh_TW/messages/tdeaccessibility/kbstateapplet.po b/tde-i18n-zh_TW/messages/tdeaccessibility/kbstateapplet.po
new file mode 100644
index 00000000000..0964129a732
--- /dev/null
+++ b/tde-i18n-zh_TW/messages/tdeaccessibility/kbstateapplet.po
@@ -0,0 +1,149 @@
+# translation of kbstateapplet.po to Traditional Chinese
+#
+# Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv dot tw>, 2006.
+msgid ""
+msgstr ""
+"Project-Id-Version: kbstateapplet\n"
+"POT-Creation-Date: 2005-10-02 02:46+0200\n"
+"PO-Revision-Date: 2006-06-06 10:17+0800\n"
+"Last-Translator: Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv "
+"dot tw>\n"
+"Language-Team: Traditional Chinese <zh_l10n@linux.org.tw>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: KBabel 1.11.2\n"
+
+#: _translatorinfo.cpp:1
+msgid ""
+"_: NAME OF TRANSLATORS\n"
+"Your names"
+msgstr "Frank Weng (a.k.a. Franklin)"
+
+#: _translatorinfo.cpp:3
+msgid ""
+"_: EMAIL OF TRANSLATORS\n"
+"Your emails"
+msgstr "franklin at goodhorse dot idv dot tw"
+
+#: kbstate.cpp:71
+msgid "Shift"
+msgstr "Shift"
+
+#: kbstate.cpp:72
+msgid "Control"
+msgstr "Control"
+
+#: kbstate.cpp:73
+msgid "Alt"
+msgstr "Alt"
+
+#: kbstate.cpp:74
+msgid "Win"
+msgstr "Win"
+
+#: kbstate.cpp:75
+msgid "Meta"
+msgstr "Meta"
+
+#: kbstate.cpp:76
+msgid "Super"
+msgstr "Super"
+
+#: kbstate.cpp:77
+msgid "Hyper"
+msgstr "Hyper"
+
+#: kbstate.cpp:78
+msgid "Alt Graph"
+msgstr "Alt Graph"
+
+#: kbstate.cpp:78
+msgid "æ"
+msgstr "æ"
+
+#: kbstate.cpp:79
+msgid "Num Lock"
+msgstr "Num Lock"
+
+#: kbstate.cpp:79
+msgid "Num"
+msgstr "Num"
+
+#: kbstate.cpp:80
+msgid "Caps Lock"
+msgstr "Caps Lock"
+
+#: kbstate.cpp:81
+msgid "Scroll Lock"
+msgstr "Scroll Lock"
+
+#: kbstate.cpp:81
+msgid "Scroll"
+msgstr "Scroll"
+
+#: kbstate.cpp:139
+msgid "Small"
+msgstr "小"
+
+#: kbstate.cpp:140
+msgid "Medium"
+msgstr "中"
+
+#: kbstate.cpp:141
+msgid "Large"
+msgstr "大"
+
+#: kbstate.cpp:146
+msgid "Modifier Keys"
+msgstr "組合鍵"
+
+#: kbstate.cpp:147
+msgid "Lock Keys"
+msgstr "鎖定鍵"
+
+#: kbstate.cpp:148
+msgid "Mouse Status"
+msgstr "滑鼠狀態"
+
+#: kbstate.cpp:149
+msgid "AccessX Status"
+msgstr "AccessX 狀態"
+
+#: kbstate.cpp:153 kbstate.cpp:715
+msgid "Keyboard Status Applet"
+msgstr "鍵盤狀態小程式"
+
+#: kbstate.cpp:154
+msgid "Set Icon Size"
+msgstr "設定圖示大小"
+
+#: kbstate.cpp:155
+msgid "Fill Available Space"
+msgstr "填上可用的空白"
+
+#: kbstate.cpp:157
+msgid "Show"
+msgstr "顯示"
+
+#: kbstate.cpp:158
+msgid "Configure AccessX Features..."
+msgstr "設定 AccessX 功能..."
+
+#: kbstate.cpp:159
+msgid "Configure Keyboard..."
+msgstr "設定鍵盤..."
+
+#: kbstate.cpp:160
+msgid "Configure Mouse..."
+msgstr "設定滑鼠..."
+
+#: kbstate.cpp:572 kbstate.cpp:586 kbstate.cpp:590 kbstate.cpp:1030
+msgid ""
+"_: a (the first letter in the alphabet)\n"
+"a"
+msgstr "a"
+
+#: kbstate.cpp:716
+msgid "Panel applet that shows the state of the modifier keys"
+msgstr "顯示組合鍵狀態的面板小程式"
diff --git a/tde-i18n-zh_TW/messages/tdeaccessibility/kmag.po b/tde-i18n-zh_TW/messages/tdeaccessibility/kmag.po
new file mode 100644
index 00000000000..2564f39f6b7
--- /dev/null
+++ b/tde-i18n-zh_TW/messages/tdeaccessibility/kmag.po
@@ -0,0 +1,390 @@
+# translation of kmag.po to Chinese Traditional
+#
+# Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv dot tw>, 2006.
+msgid ""
+msgstr ""
+"Project-Id-Version: kmag\n"
+"POT-Creation-Date: 2006-05-28 04:04+0200\n"
+"PO-Revision-Date: 2006-06-19 09:03+0800\n"
+"Last-Translator: Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv "
+"dot tw>\n"
+"Language-Team: Chinese Traditional <zh-l10n@linux.org.tw>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: KBabel 1.11.2\n"
+
+#: kmagzoomview.cpp:159
+msgid ""
+"This is the main window which shows the contents of the selected region. The "
+"contents will be magnified according to the zoom level that is set."
+msgstr "這是主視窗，顯示所選擇區域的內容。內容會根據所設定的放大係數來放大。"
+
+#: _translatorinfo.cpp:1
+msgid ""
+"_: NAME OF TRANSLATORS\n"
+"Your names"
+msgstr "Frank Weng (a.k.a. Franklin)"
+
+#: _translatorinfo.cpp:3
+msgid ""
+"_: EMAIL OF TRANSLATORS\n"
+"Your emails"
+msgstr "franklin at goodhorse dot idv dot tw"
+
+#: main.cpp:37
+msgid "File to open"
+msgstr "要開啟的檔案"
+
+#: kmagselrect.cpp:228 main.cpp:45
+msgid "KMagnifier"
+msgstr "KMagnifier"
+
+#: main.cpp:46
+msgid "Screen magnifier for the K Desktop Environment (KDE)"
+msgstr "KDE 的螢幕放大器"
+
+#: main.cpp:53
+msgid "Rewrite and current maintainer"
+msgstr "重寫/目前維護者"
+
+#: main.cpp:56
+msgid "Original idea and author (KDE1)"
+msgstr "原始想法與作者（KDE1）"
+
+#: main.cpp:58
+msgid ""
+"Rework of the user interface, improved selection window, speed optimisation, "
+"rotation, bug fixes"
+msgstr "重新處理使用者介面，加強所選擇的視窗，加快速度，旋轉功能，及錯誤修正。"
+
+#: main.cpp:59
+msgid "Some tips"
+msgstr "一些提示"
+
+#: kmagselrect.cpp:228
+msgid "Selection Window"
+msgstr "選擇視窗"
+
+#: kmag.cpp:92
+msgid "&Very Low"
+msgstr "非常低(&V)"
+
+#: kmag.cpp:92
+msgid "&Low"
+msgstr "低(&L)"
+
+#: kmag.cpp:92
+msgid "&Medium"
+msgstr "中等(&M)"
+
+#: kmag.cpp:92
+msgid "&High"
+msgstr "高(&H)"
+
+#: kmag.cpp:92
+msgid "V&ery High"
+msgstr "非常高(&E)"
+
+#: kmag.cpp:100
+msgid "&No Rotation (0 Degrees)"
+msgstr "不旋轉(&N)"
+
+#: kmag.cpp:100
+msgid "&Left (90 Degrees)"
+msgstr "左旋(90°)(&L)"
+
+#: kmag.cpp:100
+msgid "&Upside Down (180 Degrees)"
+msgstr "上下顛倒(180°)(&U)"
+
+#: kmag.cpp:100
+msgid "&Right (270 Degrees)"
+msgstr "右旋(270°)(&R)"
+
+#: kmag.cpp:129
+msgid "New &Window"
+msgstr "新視窗(&W)"
+
+#: kmag.cpp:131
+msgid "Open a new KMagnifier window"
+msgstr "開啟新的 KMagnifier 視窗"
+
+#: kmag.cpp:133
+msgid "&Stop"
+msgstr "停止(&S)"
+
+#: kmag.cpp:135
+msgid "Click to stop window refresh"
+msgstr "點選以停止視窗刷新"
+
+#: kmag.cpp:136
+msgid ""
+"Clicking on this icon will <b>start</b> / <b>stop</b>  "
+"updating of the display. Stopping the update will zero the processing power  "
+"required (CPU usage)"
+msgstr "點選此圖示會<b>開始</b>/<b>停止</b>更新顯示。停止更新會讓 CPU 使用率歸零。"
+
+#: kmag.cpp:140
+msgid "&Save Snapshot As..."
+msgstr "儲存畫面快照為(&S)..."
+
+#: kmag.cpp:142
+msgid "Saves the zoomed view to an image file."
+msgstr "儲存放大的畫面到圖片檔中。"
+
+#: kmag.cpp:143
+msgid "Save image to a file"
+msgstr "儲存畫面到檔案"
+
+#: kmag.cpp:146
+msgid "Click on this button to print the current zoomed view."
+msgstr "點選此鍵以列印目前的放大畫面。"
+
+#: kmag.cpp:149 kmag.cpp:150
+msgid "Quits the application"
+msgstr "離開應用程式"
+
+#: kmag.cpp:153
+msgid ""
+"Click on this button to copy the current zoomed view to the clipboard which you "
+"can paste in other applications."
+msgstr "點選此鍵以複製目前的放大畫面到剪貼簿中，您可以貼到其它的應用程式中。"
+
+#: kmag.cpp:154
+msgid "Copy zoomed image to clipboard"
+msgstr "複製放大的影像到剪貼簿"
+
+#: kmag.cpp:156
+msgid "Show &Menu"
+msgstr "顯示選單(&M)"
+
+#: kmag.cpp:159
+msgid "Hide &Menu"
+msgstr "隱藏選單(&M)"
+
+#: kmag.cpp:161
+msgid "Show Main &Toolbar"
+msgstr "顯示主要工具列(&T)"
+
+#: kmag.cpp:164
+msgid "Hide Main &Toolbar"
+msgstr "隱藏主要工具列(&T)"
+
+#: kmag.cpp:166
+msgid "Show &View Toolbar"
+msgstr "顯示檢視工具列(&V)"
+
+#: kmag.cpp:169
+msgid "Hide &View Toolbar"
+msgstr "隱藏檢視工具列(&V)"
+
+#: kmag.cpp:171
+msgid "Show &Settings Toolbar"
+msgstr "顯示設定工具列(&S)"
+
+#: kmag.cpp:174
+msgid "Hide &Settings Toolbar"
+msgstr "隱藏設定工具列(&S)"
+
+#: kmag.cpp:177
+msgid "&Follow Mouse Mode"
+msgstr "跟隨滑鼠模式(&F)"
+
+#: kmag.cpp:179
+msgid "Magnify mouse area into window"
+msgstr "放大滑鼠區域到視窗之中"
+
+#: kmag.cpp:180
+msgid ""
+"In this mode the area around the mouse cursor is shown in a normal window."
+msgstr "在這個模式下，滑鼠周邊的區域會顯示在一正常視窗中。"
+
+#: kmag.cpp:182
+msgid "S&election Window Mode"
+msgstr "選擇視窗模式(&E)"
+
+#: kmag.cpp:184
+msgid "Magnify selected area into window"
+msgstr "放大所選擇的區域到視窗之中"
+
+#: kmag.cpp:185
+msgid ""
+"In this mode a selection window is opened. The selected area is shown in a "
+"normal window."
+msgstr "在這個模式下，會開啟一個選擇視窗。選擇區域會顯示在一正常的視窗中。"
+
+#: kmag.cpp:187
+msgid "&Top Screen Edge Mode"
+msgstr "頂端畫面邊緣模式(&T)"
+
+#: kmag.cpp:189
+msgid "Magnify mouse area to top screen edge"
+msgstr "放大滑鼠區域到頂端螢幕邊緣"
+
+#: kmag.cpp:190
+msgid ""
+"In this mode the area around the mouse is magnified to the top screen edge."
+msgstr "在這個模式下，滑鼠周邊的區域會放大到頂端螢幕邊緣。"
+
+#: kmag.cpp:192
+msgid "&Left Screen Edge Mode"
+msgstr "左側畫面邊緣模式(&L)"
+
+#: kmag.cpp:194
+msgid "Magnify mouse area to left screen edge"
+msgstr "放大滑鼠區域到左側螢幕邊緣"
+
+#: kmag.cpp:195
+msgid ""
+"In this mode the area around the mouse is magnified to the left screen edge."
+msgstr "在這個模式下，滑鼠周邊的區域會放大到左側螢幕邊緣。"
+
+#: kmag.cpp:197
+msgid "&Right Screen Edge Mode"
+msgstr "右側畫面邊緣模式(&R)"
+
+#: kmag.cpp:199
+msgid "Magnify mouse area to right screen edge"
+msgstr "放大滑鼠區域到右側螢幕邊緣"
+
+#: kmag.cpp:200
+msgid ""
+"In this mode the area around the mouse is magnified to the right screen edge."
+msgstr "在這個模式下，滑鼠周邊的區域會放大到右側螢幕邊緣。"
+
+#: kmag.cpp:202
+msgid "&Bottom Screen Edge Mode"
+msgstr "底端畫面邊緣模式(&B)"
+
+#: kmag.cpp:204
+msgid "Magnify mouse area to bottom screen edge"
+msgstr "放大滑鼠區域到底端螢幕邊緣"
+
+#: kmag.cpp:205
+msgid ""
+"In this mode the area around the mouse is magnified to the bottom screen edge."
+msgstr "在這個模式下，滑鼠周邊的區域會放大到底端螢幕邊緣。"
+
+#: kmag.cpp:207
+msgid "Hide Mouse &Cursor"
+msgstr "隱藏滑鼠游標(&C)"
+
+#: kmag.cpp:210
+msgid "Show Mouse &Cursor"
+msgstr "顯示滑鼠游標(&C)"
+
+#: kmag.cpp:212
+msgid "Hide the mouse cursor"
+msgstr "隱藏滑鼠游標"
+
+#: kmag.cpp:215
+msgid "Click on this button to <b>zoom-in</b> on the selected region."
+msgstr "點選此鍵以<b>縮小</b>所選擇的區域。"
+
+#: kmag.cpp:219
+msgid "Select the zoom factor."
+msgstr "選擇放大係數。"
+
+#: kmag.cpp:220
+msgid "Zoom factor"
+msgstr "放大係數"
+
+#: kmag.cpp:223
+msgid "Click on this button to <b>zoom-out</b> on the selected region."
+msgstr "點選此鍵以<b>放大</b>所選擇的區域。"
+
+#: kmag.cpp:225
+msgid "&Invert Colors"
+msgstr "反轉顏色(&I)"
+
+#: kmag.cpp:228
+msgid "&Rotation"
+msgstr "旋轉(&R)"
+
+#: kmag.cpp:230
+msgid "Select the rotation degree."
+msgstr "選擇旋轉角度。"
+
+#: kmag.cpp:231
+msgid "Rotation degree"
+msgstr "旋轉角度"
+
+#: kmag.cpp:239
+msgid "Re&fresh"
+msgstr "刷新(&F)"
+
+#: kmag.cpp:241
+msgid ""
+"Select the refresh rate. The higher the rate, the more computing power (CPU) "
+"will be needed."
+msgstr "請選擇刷新頻率。頻率越高，會吃掉越多的 CPU 時間。"
+
+#: kmag.cpp:242
+msgid "Refresh rate"
+msgstr "刷新頻率"
+
+#: kmag.cpp:560
+msgid "Save Snapshot As"
+msgstr "儲存畫面快照為"
+
+#: kmag.cpp:567
+msgid ""
+"Unable to save temporary file (before uploading to the network file you "
+"specified)."
+msgstr "無法儲存暫存檔（上傳到遠端檔案）。"
+
+#: kmag.cpp:568 kmag.cpp:572 kmag.cpp:584
+msgid "Error Writing File"
+msgstr "寫入檔案錯誤"
+
+#: kmag.cpp:571
+msgid "Unable to upload file over the network."
+msgstr "無法將檔案上傳到網路。"
+
+#: kmag.cpp:574 kmag.cpp:586
+#, c-format
+msgid ""
+"Current zoomed image saved to\n"
+"%1"
+msgstr ""
+"目前的放大影像儲存到\n"
+"%1"
+
+#: kmag.cpp:583
+msgid ""
+"Unable to save file. Please check if you have permission to write to the "
+"directory."
+msgstr "無法儲存檔案。請檢查是否有寫入目錄的權限。"
+
+#: kmag.cpp:603
+msgid "Click to stop window update"
+msgstr "點選以停止視窗更新"
+
+#: kmag.cpp:606
+msgid "Start"
+msgstr "開始"
+
+#: kmag.cpp:607
+msgid "Click to start window update"
+msgstr "點選以開始視窗更新"
+
+#: kmag.cpp:637
+msgid "Magnify to Screen Edge - Select Size"
+msgstr "放大到螢幕邊緣─選擇大小"
+
+#: kmag.cpp:638 kmag.cpp:654 kmag.cpp:670 kmag.cpp:686
+msgid "Size:"
+msgstr "大小："
+
+#: kmag.cpp:653
+msgid "Magnify to Left Screen Edge - Select Size"
+msgstr "放大到左側螢幕邊緣─選擇大小"
+
+#: kmag.cpp:669
+msgid "Magnify to Right Screen Edge - Select Size"
+msgstr "放大到右側螢幕邊緣─選擇大小"
+
+#: kmag.cpp:685
+msgid "Magnify to Bottom Screen Edge - Select Size"
+msgstr "放大到底端螢幕邊緣─選擇大小"
diff --git a/tde-i18n-zh_TW/messages/tdeaccessibility/kmousetool.po b/tde-i18n-zh_TW/messages/tdeaccessibility/kmousetool.po
new file mode 100644
index 00000000000..f081e5f6e2c
--- /dev/null
+++ b/tde-i18n-zh_TW/messages/tdeaccessibility/kmousetool.po
@@ -0,0 +1,200 @@
+# translation of kmousetool.po to Chinese (traditional)
+# translation of kmousetool.po to Chinese (traditional)
+# translation of kmousetool.po to Chinese (traditional)
+# Copyright (C) 2003 Free Software Foundation, Inc.
+# Keng-Tso Ou <jupiter@ocool.org>, 2003
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: kmousetool\n"
+"POT-Creation-Date: 2005-02-17 01:26+0100\n"
+"PO-Revision-Date: 2003-07-14 21:32+0800\n"
+"Last-Translator: Keng-Tso Ou <jupiter@ocool.org>\n"
+"Language-Team: Chinese (traditional) <zh-l10n@linux.org.tw>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: KBabel 1.0.1\n"
+
+#: kmousetool.cpp:418
+msgid "The drag time must be less than or equal to the dwell time."
+msgstr "拖曳時間必須小於或等於停留時間。"
+
+#: kmousetool.cpp:418
+msgid "Invalid Value"
+msgstr "無效值"
+
+#: kmousetool.cpp:488 kmousetool.cpp:632
+msgid "&Stop"
+msgstr "停止（&S）"
+
+#: kmousetool.cpp:559
+msgid ""
+"There are unsaved changes in the active module.\n"
+"Do you want to apply the changes before closing the configuration window or "
+"discard the changes?"
+msgstr "目前的模組有未儲存的變更。<br>您想要在關閉設定視窗前 套用這些變更或者捨棄這些變更？"
+
+#: kmousetool.cpp:560
+msgid "Closing Configuration Window"
+msgstr "正在關閉設定視窗"
+
+#: kmousetool.cpp:578
+msgid ""
+"There are unsaved changes in the active module.\n"
+"Do you want to apply the changes before quitting KMousetool or discard the "
+"changes?"
+msgstr "目前的模組有未儲存的變更。<br>您想要在離開KMousetool前 套用這些變更或者捨棄這些變更？"
+
+#: kmousetool.cpp:579
+msgid "Quitting KMousetool"
+msgstr "正在離開 KMouseTool"
+
+#: kmousetool.cpp:616
+msgid "&Configure KMouseTool..."
+msgstr "設定 KMouseTool...（&C）"
+
+#: kmousetool.cpp:619
+msgid "KMousetool &Handbook"
+msgstr "KMouseTool 手冊（&H）"
+
+#: kmousetool.cpp:621
+msgid "&About KMouseTool"
+msgstr "關於 KMouseTool（&A）"
+
+#: _translatorinfo.cpp:1
+msgid ""
+"_: NAME OF TRANSLATORS\n"
+"Your names"
+msgstr "Keng-Tso Ou"
+
+#: _translatorinfo.cpp:3
+msgid ""
+"_: EMAIL OF TRANSLATORS\n"
+"Your emails"
+msgstr "jupiter@ocool.org"
+
+#. i18n: file kmousetoolui.ui line 16
+#: main.cpp:32 main.cpp:44 rc.cpp:3
+#, no-c-format
+msgid "KMouseTool"
+msgstr "KMouseTool"
+
+#: main.cpp:48
+msgid "Current maintainer"
+msgstr "現任維護者"
+
+#: main.cpp:49
+msgid "Usability improvements"
+msgstr "改善可用情形"
+
+#: main.cpp:50
+msgid "Original author"
+msgstr "原始作者"
+
+#. i18n: file kmousetoolui.ui line 44
+#: rc.cpp:6
+#, no-c-format
+msgid "Settings"
+msgstr "設定"
+
+#. i18n: file kmousetoolui.ui line 88
+#: rc.cpp:9
+#, no-c-format
+msgid "Drag t&ime (1/10 sec):"
+msgstr "拖曳時間 (1/10 秒)（&i）："
+
+#. i18n: file kmousetoolui.ui line 145
+#: rc.cpp:12
+#, no-c-format
+msgid "&Minimum movement:"
+msgstr "最小移動距離（&M）："
+
+#. i18n: file kmousetoolui.ui line 175
+#: rc.cpp:15
+#, no-c-format
+msgid "&Enable strokes"
+msgstr "啟用 strokes（&E）"
+
+#. i18n: file kmousetoolui.ui line 191
+#: rc.cpp:18
+#, no-c-format
+msgid "D&well time (1/10 sec):"
+msgstr "停留時間 (1/10 秒)（&w）："
+
+#. i18n: file kmousetoolui.ui line 202
+#: rc.cpp:21
+#, no-c-format
+msgid "Smar&t drag"
+msgstr "聰明拖曳（&t）"
+
+#. i18n: file kmousetoolui.ui line 229
+#: rc.cpp:27
+#, no-c-format
+msgid "&Reset"
+msgstr "重置（&R）"
+
+#. i18n: file kmousetoolui.ui line 264
+#: rc.cpp:33
+#, no-c-format
+msgid "Start with &KDE"
+msgstr "與KDE同時啟動（&K）"
+
+#. i18n: file kmousetoolui.ui line 272
+#: rc.cpp:36
+#, no-c-format
+msgid "A&udible click"
+msgstr "按鍵發聲（&u）"
+
+#. i18n: file kmousetoolui.ui line 298
+#: rc.cpp:39
+#, no-c-format
+msgid ""
+"KMouseTool will run as a background application after you close this dialog. To "
+"change the settings again, restart KMouseTool or use the KDE system tray."
+msgstr "KMouseTool 在您關閉這個對話框後，將在背景中執行。要再改變設定，請重新啟動 KMouseTool 或者使用 KDE 系統工具列。"
+
+#~ msgid "Start"
+#~ msgstr "開始"
+
+#~ msgid ""
+#~ "Apply\n"
+#~ "Times"
+#~ msgstr ""
+#~ "套用\n"
+#~ "時間"
+
+#~ msgid "Please enter a number for the drag time."
+#~ msgstr "請輸入一個數字為拖曳時間。"
+
+#~ msgid "Please enter a number for the dwell time."
+#~ msgstr "請輸入一個數字為停留時間。"
+
+#~ msgid "Please enter a number between %1 and %2 for the drag time."
+#~ msgstr "請輸入介於 %1 和 %2 之間的數字為拖曳時間。"
+
+#~ msgid "Please enter a number between %1 and %2 for the dwell time."
+#~ msgstr "請輸入介於 %1 和 %2 之間的數字為停留時間。"
+
+#~ msgid "<p><b>KMouseTool</b> is written and maintained by <a HREF=\"mailto:jeff@mousetool.com\">Jeff Roush</a>.</p>  <p>For more information, see the man page for <b>kmousetool</b> or the KDE documentation, both of which should have been installed with the program, or see <a HREF=\"http://www.mousetool.com/\">www.mousetool.com</a>. </p><p>This program is licensed under the GPL. In addition, by using this program, you agree not to hold the author of the program responsible for any damage it may cause.</p>"
+#~ msgstr "<p><b>KMouseTool</b>撰寫者及維護者為<a HREF=\"mailto:jeff@mousetool.com\">Jeff Roush</a>.</p>  <p>想獲取更多資訊，請參見<b>kmousetool</b>的man page 或者KDE文件，這兩者應該都已隨程式一同安裝，或者參閱 <a HREF=\"http://www.mousetool.com/\">www.mousetool.com</a>. </p><p>這個程式是 以GPL的形式授權。另外，使用這個程式表示您同意不追究作者任何因使用這個程式所導致損害的 責任。</p>"
+
+#~ msgid "If you have any ideas on how to improve this program, post them to the KDE Accessibility Mailing List, or send them directly to me, at <a HREF=\"mailto:jeff@mousetool.com\">Jeff Roush</a>.  "
+#~ msgstr "如果您有任何改善這個程式的想法，請將您的想法貼到KDE Accessibility Mailing List，或者直接將您的想法直接寄給作者<a HREF=\"mailto: jeff@mousetool.com\">Jeff Roush</a>.  "
+
+#~ msgid "<p>This program is distributed under the GPL, the GNU Public License.</p><p>A copy of this license should have been installed along with the program.</p>"
+#~ msgstr "<p>本程式是以GPL(GNU Public License)形式散佈。</p><p>這個授權書的副本應該已隨同程式安裝。</p>"
+
+#~ msgid "KMouseTool Version %1"
+#~ msgstr "KMouseTool 版本 %1"
+
+#~ msgid ""
+#~ "_: About KMouseTool\n"
+#~ "&About"
+#~ msgstr "關於(&A)"
+
+#~ msgid "&Report Bugs or Wishes"
+#~ msgstr "問題或希望通報(&R)"
+
+#~ msgid "&License Agreement"
+#~ msgstr "授權書(&L)"
diff --git a/tde-i18n-zh_TW/messages/tdeaccessibility/kmouth.po b/tde-i18n-zh_TW/messages/tdeaccessibility/kmouth.po
new file mode 100644
index 00000000000..7e0f6c9e319
--- /dev/null
+++ b/tde-i18n-zh_TW/messages/tdeaccessibility/kmouth.po
@@ -0,0 +1,1140 @@
+# translation of kmouth.po to Traditional Chinese
+# Copyright (C) 2006 Free Software Foundation, Inc.
+#
+# Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv dot tw>, 2006.
+msgid ""
+msgstr ""
+"Project-Id-Version: kmouth\n"
+"POT-Creation-Date: 2005-07-24 01:41+0200\n"
+"PO-Revision-Date: 2006-06-06 10:14+0800\n"
+"Last-Translator: Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv "
+"dot tw>\n"
+"Language-Team: Traditional Chinese <zh_l10n@linux.org.tw>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: KBabel 1.11.2\n"
+
+#: texttospeechconfigurationwidget.cpp:47
+#: wordcompletion/dictionarycreationwizard.cpp:101
+msgid "Local"
+msgstr "本地"
+
+#: texttospeechconfigurationwidget.cpp:51
+#: wordcompletion/dictionarycreationwizard.cpp:105
+msgid "Latin1"
+msgstr "Latin1"
+
+#: texttospeechconfigurationwidget.cpp:52
+#: wordcompletion/dictionarycreationwizard.cpp:106
+msgid "Unicode"
+msgstr "Unicode"
+
+#: wordcompletion/creationsourcedetailsui.ui.h:31
+#: wordcompletion/klanguagebuttonhelper.cpp:38
+#: wordcompletion/klanguagebuttonhelper.cpp:56
+#: wordcompletion/wordcompletionui.ui.h:31
+#: wordcompletion/wordcompletionwidget.cpp:78
+#: wordcompletion/wordcompletionwidget.cpp:139
+#: wordcompletion/wordcompletionwidget.cpp:203
+msgid "without name"
+msgstr "沒有名稱"
+
+#: wordcompletion/wordcompletionwidget.cpp:249
+msgid "Export Dictionary"
+msgstr "輸出字典"
+
+#: phrasebook/phrasebook.cpp:277 wordcompletion/wordcompletionwidget.cpp:254
+msgid "The file %1 already exists. Do you want to overwrite it?"
+msgstr "檔案 %1 已經存在，您要將它覆寫嗎？"
+
+#: phrasebook/phrasebook.cpp:278 wordcompletion/wordcompletionwidget.cpp:255
+msgid "File Exists"
+msgstr "檔案已存在"
+
+#: phrasebook/phrasebook.cpp:278 wordcompletion/wordcompletionwidget.cpp:255
+msgid "&Overwrite"
+msgstr "覆寫(&O)"
+
+#: wordcompletion/wordlist.cpp:109
+msgid "Creating Word List"
+msgstr "建立字詞列表"
+
+#: wordcompletion/wordlist.cpp:109 wordcompletion/wordlist.cpp:291
+msgid "Parsing the KDE documentation..."
+msgstr "分析 KDE 文件..."
+
+#: wordcompletion/wordlist.cpp:238
+msgid "Merging dictionaries..."
+msgstr "合併字典..."
+
+#: wordcompletion/wordlist.cpp:305
+msgid "Parsing file..."
+msgstr "分析檔案..."
+
+#: wordcompletion/wordlist.cpp:315
+msgid "Parsing directory..."
+msgstr "分析資料夾..."
+
+#: wordcompletion/wordlist.cpp:504
+msgid "Performing spell check..."
+msgstr "進行拼字檢查..."
+
+#. i18n: file wordcompletion/kdedocsourceui.ui line 68
+#: rc.cpp:292 wordcompletion/kdedocsourceui.ui.h:14
+#, no-c-format
+msgid ""
+"With this combo box you select which of the installed languages is used for "
+"creating the new dictionary. KMouth will only parse documentation files of this "
+"language."
+msgstr "您可以在此選擇要建立新字典的語言。KMouth 將只分析此語言的文件檔。"
+
+#. i18n: file wordcompletion/creationsourcedetailsui.ui line 144
+#: rc.cpp:241 wordcompletion/creationsourcedetailsui.ui.h:15
+#, no-c-format
+msgid ""
+"With this combo box you decide which language should be associated with the new "
+"dictionary."
+msgstr "您可以在此決定新字典使用的語言。"
+
+#: wordcompletion/creationsourcedetailsui.ui.h:18
+#: wordcompletion/wordcompletionui.ui.h:18
+msgid "Other"
+msgstr "其他"
+
+#: wordcompletion/creationsourcedetailsui.ui.h:25
+#: wordcompletion/wordcompletionui.ui.h:25
+msgid "Create Custom Language"
+msgstr "建立自訂的語言"
+
+#: wordcompletion/creationsourcedetailsui.ui.h:25
+#: wordcompletion/wordcompletionui.ui.h:25
+msgid "Please enter the code for the custom language:"
+msgstr "請輸入此自訂語言的代碼："
+
+#: wordcompletion/dictionarycreationwizard.cpp:53
+msgid "Source of New Dictionary (1)"
+msgstr "新建字典來源 (1)"
+
+#: wordcompletion/dictionarycreationwizard.cpp:58
+#: wordcompletion/dictionarycreationwizard.cpp:62
+#: wordcompletion/dictionarycreationwizard.cpp:70
+#: wordcompletion/dictionarycreationwizard.cpp:73
+#: wordcompletion/dictionarycreationwizard.cpp:117
+#: wordcompletion/dictionarycreationwizard.cpp:133
+#: wordcompletion/dictionarycreationwizard.cpp:142
+#: wordcompletion/dictionarycreationwizard.cpp:151
+msgid "Source of New Dictionary (2)"
+msgstr "新建字典來源 (2)"
+
+#: wordcompletion/dictionarycreationwizard.cpp:63
+msgid "&Directory:"
+msgstr "字典(&D):"
+
+#: wordcompletion/dictionarycreationwizard.cpp:64
+#: wordcompletion/dictionarycreationwizard.cpp:66
+msgid ""
+"With this input field you specify which directory you want to load for creating "
+"the new dictionary."
+msgstr "您可以在此指定您要載入哪個字典以建立新字典。"
+
+#: wordcompletion/dictionarycreationwizard.cpp:238
+msgid "Merge result"
+msgstr "合併結果"
+
+#: wordcompletion/dictionarycreationwizard.cpp:241
+msgid ""
+"_: In the sense of a blank word list\n"
+"Empty list"
+msgstr "空的清單"
+
+#: wordcompletion/dictionarycreationwizard.cpp:250
+msgid "KDE Documentation"
+msgstr "KDE 文件"
+
+#. i18n: file wordcompletion/wordcompletionui.ui line 224
+#: rc.cpp:340 wordcompletion/wordcompletionui.ui.h:15
+#, no-c-format
+msgid ""
+"With this combo box you select the language associated with the selected "
+"dictionary."
+msgstr "您可以在此選擇所選的字典使用的語言。"
+
+#: optionsdialog.cpp:123
+msgid "General Options"
+msgstr "一般選項"
+
+#: optionsdialog.cpp:129
+msgid "&Preferences"
+msgstr "喜好(&P)"
+
+#: optionsdialog.cpp:133
+msgid "&Text-to-Speech"
+msgstr "本文轉語音(&T)"
+
+#: configwizard.cpp:103 optionsdialog.cpp:136
+msgid "Word Completion"
+msgstr "完成字詞"
+
+#: optionsdialog.cpp:142
+msgid "KTTSD Speech Service"
+msgstr "KTTSD 語音服務"
+
+#: optionsdialog.cpp:143
+msgid "KDE Text-to-Speech Daemon Configuration"
+msgstr "KDE 本文轉語音守護程式設定"
+
+#: kmouth.cpp:98
+msgid "&Open as History..."
+msgstr "開啟為歷史紀錄(&O)..."
+
+#: kmouth.cpp:99 kmouth.cpp:100
+msgid "Opens an existing file as history"
+msgstr "開啟已存在檔案為歷史紀錄"
+
+#: kmouth.cpp:102
+msgid "Save &History As..."
+msgstr "另存歷史紀錄為(&H)..."
+
+#: kmouth.cpp:103 kmouth.cpp:104
+msgid "Saves the actual history as..."
+msgstr "另存目前的歷史紀錄為..."
+
+#: kmouth.cpp:106
+msgid "&Print History..."
+msgstr "列印歷史紀錄(&P)..."
+
+#: kmouth.cpp:107 kmouth.cpp:108
+msgid "Prints out the actual history"
+msgstr "列印目前的歷史紀錄"
+
+#: kmouth.cpp:111 kmouth.cpp:112
+msgid "Quits the application"
+msgstr "退出請求"
+
+#: kmouth.cpp:116
+msgid "Cuts the selected section and puts it to the clipboard"
+msgstr "剪下選取至剪貼簿"
+
+#: kmouth.cpp:117
+msgid ""
+"Cuts the selected section and puts it to the clipboard. If there is some text "
+"selected in the edit field it is placed it on the clipboard. Otherwise the "
+"selected sentences in the history (if any) are placed on the clipboard."
+msgstr "剪下選取至剪貼簿。如果編輯區有本文被選取，它將被剪貼到剪貼簿。否則在歷史紀錄中被選取的句子(如果有的話)將被剪貼到剪貼簿。"
+
+#: kmouth.cpp:120
+msgid "Copies the selected section to the clipboard"
+msgstr "複製選取至剪貼簿"
+
+#: kmouth.cpp:121
+msgid ""
+"Copies the selected section to the clipboard. If there is some text selected in "
+"the edit field it is copied to the clipboard. Otherwise the selected sentences "
+"in the history (if any) are copied to the clipboard."
+msgstr "複製選取至剪貼簿。如果編輯區有本文被選取，它將被複製到剪貼簿。否則在歷史紀錄中被選取的句子(如果有的話)將被複製到剪貼簿。"
+
+#: kmouth.cpp:124 phrasebook/phrasebookdialog.cpp:371
+#: phrasebook/phrasebookdialog.cpp:372
+msgid "Pastes the clipboard contents to actual position"
+msgstr "貼上剪貼簿內容到目前位置"
+
+#: kmouth.cpp:125
+msgid ""
+"Pastes the clipboard contents at the current cursor position into the edit "
+"field."
+msgstr "貼上剪貼簿內容到編輯區內的游標目前所在位置"
+
+#: kmouth.cpp:127 kmouth.cpp:156 phraselist.cpp:79
+msgid "&Speak"
+msgstr "朗讀(&S)"
+
+#: kmouth.cpp:128
+msgid "Speaks the currently active sentence(s)"
+msgstr "朗讀目前動態中的句子"
+
+#: kmouth.cpp:129 phraselist.cpp:82
+msgid ""
+"Speaks the currently active sentence(s). If there is some text in the edit "
+"field it is spoken. Otherwise the selected sentences in the history (if any) "
+"are spoken."
+msgstr "朗讀目前動態中的句子。如果編輯區內有文字，它將會被朗讀。否則歷史紀錄中的句子(如果有的話)將會被朗讀。"
+
+#: kmouth.cpp:132
+msgid "&Edit..."
+msgstr "編輯(&E)..."
+
+#: kmouth.cpp:137 kmouth.cpp:138
+msgid "Enables/disables the toolbar"
+msgstr "啟動/關閉 工具列"
+
+#: kmouth.cpp:140
+msgid "Show P&hrasebook Bar"
+msgstr "顯示片語書列(&H)"
+
+#: kmouth.cpp:141 kmouth.cpp:142
+msgid "Enables/disables the phrasebook bar"
+msgstr "啟動/關閉片語書工具列"
+
+#: kmouth.cpp:145 kmouth.cpp:146
+msgid "Enables/disables the statusbar"
+msgstr "啟動/關閉狀態列"
+
+#: kmouth.cpp:148
+msgid "&Configure KMouth..."
+msgstr "設定 Kmouth(&C)..."
+
+#: kmouth.cpp:149 kmouth.cpp:150
+msgid "Opens the configuration dialog"
+msgstr "打開組態對話框"
+
+#: kmouth.cpp:157 kmouth.cpp:158
+msgid "Speaks the currently selected phrases in the history"
+msgstr "朗讀目前歷史紀錄中選取的片語"
+
+#: kmouth.cpp:161 kmouth.cpp:162
+msgid "Deletes the currently selected phrases from the history"
+msgstr "從歷史紀錄中刪除目前選取的片語"
+
+#: kmouth.cpp:164
+msgid "Cu&t"
+msgstr "剪下(&T)"
+
+#: kmouth.cpp:165 kmouth.cpp:166
+msgid ""
+"Cuts the currently selected phrases from the history and puts them to the "
+"clipboard"
+msgstr "從歷史紀錄剪下所選取的片語並貼至剪貼簿"
+
+#: kmouth.cpp:169 kmouth.cpp:170
+msgid "Copies the currently selected phrases from the history to the clipboard"
+msgstr "從歷史紀錄複製所選取的片語並貼至剪貼簿"
+
+#: kmouth.cpp:172
+msgid "Select &All Entries"
+msgstr "選取所有條目(&A)"
+
+#: kmouth.cpp:173 kmouth.cpp:174
+msgid "Selects all phrases in the history"
+msgstr "選取歷史紀錄中所有片語"
+
+#: kmouth.cpp:176
+msgid "D&eselect All Entries"
+msgstr "取消選取所有條目(&D)"
+
+#: kmouth.cpp:177 kmouth.cpp:178
+msgid "Deselects all phrases in the history"
+msgstr "取消選取歷史紀錄中所有片語"
+
+#: kmouth.cpp:192 kmouth.cpp:210 kmouth.cpp:313 kmouth.cpp:321 kmouth.cpp:334
+#: kmouth.cpp:380 kmouth.cpp:397 kmouth.cpp:414 kmouth.cpp:431
+msgid "Ready."
+msgstr "就緒。"
+
+#: kmouth.cpp:207 kmouth.cpp:309
+msgid "Opening file..."
+msgstr "正在開啟檔案..."
+
+#: kmouth.cpp:317
+msgid "Saving history with a new filename..."
+msgstr "以新檔名儲存歷史紀錄..."
+
+#: kmouth.cpp:326
+msgid "Printing..."
+msgstr "正在列印..."
+
+#: kmouth.cpp:339
+msgid "Exiting..."
+msgstr "正在退出..."
+
+#: kmouth.cpp:373
+msgid "Toggling menubar..."
+msgstr "切換選單列..."
+
+#: kmouth.cpp:385
+msgid "Toggling toolbar..."
+msgstr "切換工具列..."
+
+#: kmouth.cpp:402
+msgid "Toggling phrasebook bar..."
+msgstr "切換片語書列..."
+
+#: kmouth.cpp:419
+msgid "Toggle the statusbar..."
+msgstr "切換狀態列..."
+
+#: _translatorinfo.cpp:1
+msgid ""
+"_: NAME OF TRANSLATORS\n"
+"Your names"
+msgstr "Sheng-Hung Wang, Frank Weng (a.k.a. Franklin)"
+
+#: _translatorinfo.cpp:3
+msgid ""
+"_: EMAIL OF TRANSLATORS\n"
+"Your emails"
+msgstr "gentamicin5@yahoo.com.tw, franklin at goodhorse dot idv dot tw"
+
+#: main.cpp:28
+msgid "A type-and-say front end for speech synthesizers"
+msgstr "一個 \"鍵入並朗讀\" 的語音合成器前端"
+
+#: main.cpp:34
+msgid "History file to open"
+msgstr "要打開的歷史紀錄檔"
+
+#: main.cpp:42
+msgid "KMouth"
+msgstr "KMouth"
+
+#: main.cpp:49
+msgid "Tips, extended phrase books"
+msgstr "提示，擴展的片語書"
+
+#. i18n: file kmouthui.rc line 14
+#: rc.cpp:9 rc.cpp:98
+#, no-c-format
+msgid "&Phrase Books"
+msgstr "片語書(&P)"
+
+#. i18n: file preferencesui.ui line 24
+#: rc.cpp:15 rc.cpp:104
+#, no-c-format
+msgid "Preferences"
+msgstr "喜好"
+
+#. i18n: file preferencesui.ui line 63
+#: rc.cpp:18 rc.cpp:107
+#, no-c-format
+msgid "&Selection of phrases in the phrase book:"
+msgstr "選取片語書內的片語(&S):"
+
+#. i18n: file preferencesui.ui line 69
+#: rc.cpp:21 rc.cpp:30 rc.cpp:110 rc.cpp:119
+#, no-c-format
+msgid ""
+"This combo box specifies whether selected phrases of the phrase book are "
+"immediately spoken or just inserted into the edit field."
+msgstr "這個下拉式清單方塊指定片語書中所選取的片語是要立即朗讀或者是插入到編輯區。"
+
+#. i18n: file preferencesui.ui line 75
+#: rc.cpp:24 rc.cpp:113
+#, no-c-format
+msgid "Speak Immediately"
+msgstr "立即朗讀"
+
+#. i18n: file preferencesui.ui line 80
+#: rc.cpp:27 rc.cpp:116
+#, no-c-format
+msgid "Insert Into Edit Field"
+msgstr "插入到編輯區"
+
+#. i18n: file preferencesui.ui line 122
+#: rc.cpp:33 rc.cpp:122
+#, no-c-format
+msgid "Closing the phrase &book edit window:"
+msgstr "正在關閉片語書編輯視窗(&B):"
+
+#. i18n: file preferencesui.ui line 128
+#: rc.cpp:36 rc.cpp:48 rc.cpp:125 rc.cpp:137
+#, no-c-format
+msgid ""
+"This combo box specifies whether the phrase book is automatically saved when "
+"the edit window is closed."
+msgstr "這個下拉式清單方塊指定當編輯視窗關閉時是否自動儲存片語書。"
+
+#. i18n: file preferencesui.ui line 134
+#: rc.cpp:39 rc.cpp:128
+#, no-c-format
+msgid "Save Phrase Book"
+msgstr "儲存片語書"
+
+#. i18n: file preferencesui.ui line 139
+#: rc.cpp:42 rc.cpp:131
+#, no-c-format
+msgid "Discard Changes"
+msgstr "放棄修改"
+
+#. i18n: file preferencesui.ui line 144
+#: rc.cpp:45 rc.cpp:134
+#, no-c-format
+msgid "Ask Whether to Save"
+msgstr "詢問是否儲存"
+
+#. i18n: file texttospeechconfigurationui.ui line 16
+#: rc.cpp:51 rc.cpp:140
+#, no-c-format
+msgid "Text-to-Speech"
+msgstr "本文轉語音"
+
+#. i18n: file texttospeechconfigurationui.ui line 55
+#: rc.cpp:54 rc.cpp:143
+#, no-c-format
+msgid "C&ommand for speaking texts:"
+msgstr "朗讀本文的命令(&O):"
+
+#. i18n: file texttospeechconfigurationui.ui line 65
+#: rc.cpp:57 rc.cpp:64 rc.cpp:146 rc.cpp:153
+#, no-c-format
+msgid ""
+"This field specifies both the command used for speaking texts and its "
+"parameters. KMouth knows the following placeholders:\n"
+"%t -- the text that should be spoken\n"
+"%f -- the name of a file containing the text\n"
+"%l -- the language code\n"
+"%% -- a percent sign"
+msgstr ""
+"這個區域指定朗讀本文的命令與參數。KMouth 可以辨識以下的參數：\n"
+"%t：要朗讀的本文\n"
+"%f：包含本文的檔名\n"
+"%l：使用的語言代碼\n"
+"%%：百分比符號"
+
+#. i18n: file texttospeechconfigurationui.ui line 117
+#: rc.cpp:71 rc.cpp:160 rc.cpp:217
+#, no-c-format
+msgid "Character &encoding:"
+msgstr "字元編碼(&E):"
+
+#. i18n: file texttospeechconfigurationui.ui line 123
+#: rc.cpp:74 rc.cpp:77 rc.cpp:163 rc.cpp:166
+#, no-c-format
+msgid ""
+"This combo box specifies which character encoding is used for passing the text."
+msgstr "這個下拉式清單方塊指定傳遞本文時用的字元編碼。"
+
+#. i18n: file texttospeechconfigurationui.ui line 141
+#: rc.cpp:80 rc.cpp:169
+#, no-c-format
+msgid "Send the data as standard &input"
+msgstr "傳送資料為標準輸入(&I)"
+
+#. i18n: file texttospeechconfigurationui.ui line 144
+#: rc.cpp:83 rc.cpp:172
+#, no-c-format
+msgid ""
+"This check box specifies whether the text is sent as standard input to the "
+"speech synthesizer."
+msgstr "這個確認框指定本文是否被以標準輸入傳至語音合成器。"
+
+#. i18n: file texttospeechconfigurationui.ui line 152
+#: rc.cpp:86 rc.cpp:175
+#, no-c-format
+msgid "&Use KTTSD speech service if possible"
+msgstr "如果可以則使用 kttsd 語音服務(&U)"
+
+#. i18n: file texttospeechconfigurationui.ui line 155
+#: rc.cpp:89 rc.cpp:178
+#, no-c-format
+msgid ""
+"This check box specifies KMouth tries to use the KTTSD speech service prior to "
+"calling the speech synthesizer directly. The KTTSD speech service is a KDE "
+"daemon which gives KDE applications a standardized interface for speech "
+"synthesis and is currently developed in CVS."
+msgstr ""
+"勾選此選項的話，KMouth 會試著先使用 KTTSD 語音服務，而不是直接呼叫語音合成器。KTTSD 語音服務提供 KDE "
+"應用程式一個標準化的語音合成介面，並且正在開發中。"
+
+#. i18n: file phrasebook/buttonboxui.ui line 16
+#: rc.cpp:181
+#, no-c-format
+msgid "Currently Selected Phrase or Phrase Book"
+msgstr "目前所選擇的片語或片語書"
+
+#. i18n: file phrasebook/buttonboxui.ui line 33
+#: rc.cpp:184
+#, no-c-format
+msgid "&Currently Selected Phrase or Phrase Book"
+msgstr "目前所選擇的片語或片語書(&C)"
+
+#. i18n: file phrasebook/buttonboxui.ui line 55
+#: rc.cpp:187 rc.cpp:208
+#, no-c-format
+msgid ""
+"With this line edit you define the name of a sub-phrasebook or the contents of "
+"a phrase."
+msgstr "您可以在此定義片語書的名稱，或是片語的內容。"
+
+#. i18n: file phrasebook/buttonboxui.ui line 63
+#: rc.cpp:190
+#, no-c-format
+msgid "&None"
+msgstr "無(&N)"
+
+#. i18n: file phrasebook/buttonboxui.ui line 66
+#: rc.cpp:193
+#, no-c-format
+msgid ""
+"If you select this option then the selected phrase will not be reachable by a "
+"keyboard shortcut."
+msgstr "如果選擇此選項，所選取的片語就不能使用鍵盤快速鍵。"
+
+#. i18n: file phrasebook/buttonboxui.ui line 74
+#: rc.cpp:196
+#, no-c-format
+msgid "C&ustom"
+msgstr "自訂(&U)"
+
+#. i18n: file phrasebook/buttonboxui.ui line 77
+#: rc.cpp:199
+#, no-c-format
+msgid ""
+"If you select this option then the selected phrase will be reachable by a "
+"keyboard shortcut. You can change the shortcut with the button next to this "
+"option."
+msgstr "如果選取此選項，所選取的片語可以使用鍵盤快速鍵。您可以用按鍵來改變快速鍵定義。"
+
+#. i18n: file phrasebook/buttonboxui.ui line 85
+#: rc.cpp:202
+#, no-c-format
+msgid "Shortcut for the phrase:"
+msgstr "片語的快速鍵:"
+
+#. i18n: file phrasebook/buttonboxui.ui line 93
+#: phrasebook/phrasebookdialog.cpp:491 phrasebook/phrasebookdialog.cpp:505
+#: rc.cpp:205
+#, no-c-format
+msgid "Text of the &phrase:"
+msgstr "片語本文(&P):"
+
+#. i18n: file wordcompletion/creationsourcedetailsui.ui line 24
+#: rc.cpp:211 rc.cpp:280
+#, no-c-format
+msgid "&Compare to OpenOffice.org dictionary:"
+msgstr "與 OpenOffice.org 字典比較(&C)："
+
+#. i18n: file wordcompletion/creationsourcedetailsui.ui line 30
+#: rc.cpp:214
+#, no-c-format
+msgid ""
+"If you select this check box the words are spell-checked before they are "
+"inserted into the new dictionary."
+msgstr "勾選此選項的話，這些字在插入字典之前會先做拼字檢查。"
+
+#. i18n: file wordcompletion/creationsourcedetailsui.ui line 52
+#: rc.cpp:220 rc.cpp:232
+#, no-c-format
+msgid ""
+"With this combo box you select the character encoding used to load text files. "
+"This combo box is not used for XML files or for dictionary files."
+msgstr "您可以在此選擇要載入文字檔的字元編碼。這不是用於 XML 檔或字典檔。"
+
+#. i18n: file wordcompletion/creationsourcedetailsui.ui line 68
+#: rc.cpp:223
+#, no-c-format
+msgid "&Filename:"
+msgstr "檔名(&F):"
+
+#. i18n: file wordcompletion/creationsourcedetailsui.ui line 74
+#: rc.cpp:226 rc.cpp:229
+#, no-c-format
+msgid ""
+"With this input field you specify which file you want to load for creating the "
+"new dictionary."
+msgstr "您可以在此指定您要載入以建立新字典的檔案。"
+
+#. i18n: file wordcompletion/creationsourcedetailsui.ui line 125
+#: rc.cpp:235 rc.cpp:286
+#, no-c-format
+msgid ""
+"With this input field you select the OpenOffice.org directory that will be used "
+"to spellcheck the words of the new dictionary."
+msgstr "您可以在此選擇要用於拼字檢查的 OpenOffice.org 字典。"
+
+#. i18n: file wordcompletion/creationsourcedetailsui.ui line 141
+#: rc.cpp:238 rc.cpp:289 rc.cpp:337
+#, no-c-format
+msgid "&Language:"
+msgstr "語言(&L):"
+
+#. i18n: file wordcompletion/creationsourceui.ui line 24
+#: rc.cpp:244
+#, no-c-format
+msgid "C&reate new dictionary:"
+msgstr "建立新字典(&R):"
+
+#. i18n: file wordcompletion/creationsourceui.ui line 30
+#: rc.cpp:247
+#, no-c-format
+msgid ""
+"If you select this box a new dictionary is created by either loading a "
+"dictionary file or by counting the individual words in a text."
+msgstr "如果選取此選項，會以載入一個字典檔或計算本文中個別單字的方式建立新字典。"
+
+#. i18n: file wordcompletion/creationsourceui.ui line 38
+#: rc.cpp:250
+#, no-c-format
+msgid "&Merge dictionaries"
+msgstr "合併字典(&M)"
+
+#. i18n: file wordcompletion/creationsourceui.ui line 41
+#: rc.cpp:253
+#, no-c-format
+msgid ""
+"If you select this box a new dictionary is created by merging existing "
+"dictionaries."
+msgstr "選取此選項的話，會以合併現有字典的方式建立新字典。"
+
+#. i18n: file wordcompletion/creationsourceui.ui line 60
+#: rc.cpp:256
+#, no-c-format
+msgid "From &file"
+msgstr "從檔案(&F)"
+
+#. i18n: file wordcompletion/creationsourceui.ui line 63
+#: rc.cpp:259
+#, no-c-format
+msgid ""
+"If you select this box a new dictionary is created by loading a file. You may "
+"either select an XML file, a standard text file or a file containing a word "
+"completion dictionary. If you select a standard text file or an XML file the "
+"frequentness of the individual words is detected by simply counting the "
+"occurrences of each word."
+msgstr ""
+"選取此選項的話，會以載入檔案的方式建立新字典。您可以指定一個 XML 檔，一個標準的文字檔，或是一個含有文字補完字典的檔案。如果選取標準文字檔或 XML "
+"檔，會以計算單字出現的次數來偵測單字頻率。"
+
+#. i18n: file wordcompletion/creationsourceui.ui line 82
+#: rc.cpp:262
+#, no-c-format
+msgid "From &KDE documentation"
+msgstr "從 KDE 文件(&K)"
+
+#. i18n: file wordcompletion/creationsourceui.ui line 88
+#: rc.cpp:265
+#, no-c-format
+msgid ""
+"If you select this box a new dictionary is created by parsing the KDE "
+"documentation. The frequentness of the individual words is detect by simply "
+"counting the occurrences of each word."
+msgstr "選取此選項的話，會以分析 KDE 文件的方式建立新字典，並會以計算單字出現的次數來偵測單字頻率。"
+
+#. i18n: file wordcompletion/creationsourceui.ui line 107
+#: rc.cpp:268
+#, no-c-format
+msgid "From f&older"
+msgstr "從資料夾(&O)"
+
+#. i18n: file wordcompletion/creationsourceui.ui line 110
+#: rc.cpp:271
+#, no-c-format
+msgid ""
+"If you select this box a new dictionary is created by loading all files in a "
+"folder and its subdirectories."
+msgstr "選取此選項的話，會以載入資料夾及其子資料夾中所有檔案的方式來建立新字典。"
+
+#. i18n: file wordcompletion/creationsourceui.ui line 135
+#: rc.cpp:274
+#, no-c-format
+msgid "Create an &empty wordlist"
+msgstr "建立空的單字列表(&E)"
+
+#. i18n: file wordcompletion/creationsourceui.ui line 138
+#: rc.cpp:277
+#, no-c-format
+msgid ""
+"If you select this box a blank dictionary without any entries is created. As "
+"KMouth automatically adds newly typed words to the dictionaries it will learn "
+"your vocabulary with the time."
+msgstr "選取此選項的話，會建立一個空的字典，不含任何項目。KMouth 可以將您新輸入的單字加入字典中。"
+
+#. i18n: file wordcompletion/kdedocsourceui.ui line 30
+#: rc.cpp:283
+#, no-c-format
+msgid ""
+"If you select this check box the words from the KDE documentation are "
+"spell-checked before they are inserted into the new dictionary."
+msgstr "勾選此選項的話，KDE 文件中的單字在插入新字典之前會先做拼字檢查。"
+
+#. i18n: file wordcompletion/wordcompletionui.ui line 40
+#: rc.cpp:295
+#, no-c-format
+msgid "Add D&ictionary..."
+msgstr "新增字典(&I)..."
+
+#. i18n: file wordcompletion/wordcompletionui.ui line 43
+#: rc.cpp:298
+#, no-c-format
+msgid ""
+"With this button you can add a new dictionary to the list of available "
+"dictionaries."
+msgstr "按下此按鍵，您可以新增字典。"
+
+#. i18n: file wordcompletion/wordcompletionui.ui line 62
+#: rc.cpp:301
+#, no-c-format
+msgid "&Delete Dictionary"
+msgstr "刪除字典(&D)"
+
+#. i18n: file wordcompletion/wordcompletionui.ui line 65
+#: rc.cpp:304
+#, no-c-format
+msgid "With this button you delete the selected dictionary."
+msgstr "按下此按鍵可以刪除所選取的字典。"
+
+#. i18n: file wordcompletion/wordcompletionui.ui line 84
+#: rc.cpp:307
+#, no-c-format
+msgid "Move &Up"
+msgstr "向上移動(&U)"
+
+#. i18n: file wordcompletion/wordcompletionui.ui line 87
+#: rc.cpp:310
+#, no-c-format
+msgid "With this button you move the selected dictionary up."
+msgstr "按下此按鍵將所選取的字典往上移。"
+
+#. i18n: file wordcompletion/wordcompletionui.ui line 106
+#: rc.cpp:313
+#, no-c-format
+msgid "&Move Down"
+msgstr "向上移動(&M)"
+
+#. i18n: file wordcompletion/wordcompletionui.ui line 109
+#: rc.cpp:316
+#, no-c-format
+msgid "With this button you move the selected dictionary down."
+msgstr "按下此按鍵將所選取的字典往下移。"
+
+#. i18n: file wordcompletion/wordcompletionui.ui line 128
+#: rc.cpp:319
+#, no-c-format
+msgid "&Export Dictionary..."
+msgstr "輸出字典(&E)..."
+
+#. i18n: file wordcompletion/wordcompletionui.ui line 131
+#: rc.cpp:322
+#, no-c-format
+msgid "With this button you export the selected dictionary to a file."
+msgstr "按下此按鍵將匯出所選取的字典到檔案中。"
+
+#. i18n: file wordcompletion/wordcompletionui.ui line 164
+#: rc.cpp:325
+#, no-c-format
+msgid "Dictionary"
+msgstr "字典"
+
+#. i18n: file wordcompletion/wordcompletionui.ui line 175
+#: rc.cpp:328
+#, no-c-format
+msgid "Language"
+msgstr "語言"
+
+#. i18n: file wordcompletion/wordcompletionui.ui line 191
+#: rc.cpp:331
+#, no-c-format
+msgid ""
+"This list contains all available dictionaries for the word completion. KMouth "
+"will display a combo box next to the edit field in the main window if this list "
+"contains more than one dictionary. You can use this combo box in order to "
+"select the dictionary that actually gets used for the word completion."
+msgstr "這個清單包含所有可用於單字補完的字典。如果有兩個以上的字典可選擇，KMouth 會在主視窗中顯示選單。您可以在此選擇要用於單字補完的字典。"
+
+#. i18n: file wordcompletion/wordcompletionui.ui line 210
+#: rc.cpp:334
+#, no-c-format
+msgid "&Selected Dictionary"
+msgstr "選擇的字典(&S)"
+
+#. i18n: file wordcompletion/wordcompletionui.ui line 232
+#: rc.cpp:343
+#, no-c-format
+msgid "&Name:"
+msgstr "名稱(&M):"
+
+#. i18n: file wordcompletion/wordcompletionui.ui line 238
+#: rc.cpp:346 rc.cpp:349
+#, no-c-format
+msgid "With this input field you specify the name of the selected dictionary."
+msgstr "您可以在此指定所選取字典的名稱。"
+
+#: phrasebook/phrasebookdialog.cpp:134
+msgid " (%1 of %2 books selected)"
+msgstr "%2 本片語書選擇了 %1 本"
+
+#: phrasebook/phrasebookdialog.cpp:145
+msgid "Please decide which phrase books you need:"
+msgstr "請決定您需要那些片語書:"
+
+#: phrasebook/phrasebookdialog.cpp:153
+msgid "Book"
+msgstr "書"
+
+#: phrasebook/phrasebookdialog.cpp:242
+msgid ""
+"By clicking on this button you can select the keyboard shortcut associated with "
+"the selected phrase."
+msgstr "按下此按鍵，您可以選擇所選的片語使用的快速鍵。"
+
+#: phrasebook/phrasebookdialog.cpp:263
+msgid "Phrase Book"
+msgstr "片語書"
+
+#: phrasebook/phrasebookdialog.cpp:300
+msgid "Phrase"
+msgstr "片語"
+
+#: phrasebook/phrasebookdialog.cpp:301
+msgid "Shortcut"
+msgstr "快速鍵"
+
+#: phrasebook/phrasebookdialog.cpp:305
+msgid ""
+"This list contains the current phrase book in a tree structure. You can select "
+"and modify individual phrases and sub phrase books"
+msgstr "這個清單包含目前的片語書，以樹狀圖顯示。您可以選擇並變更每個片語與片語書。"
+
+#: phrasebook/phrasebookdialog.cpp:325
+msgid "&New Phrase"
+msgstr "新片語(&N)"
+
+#: phrasebook/phrasebookdialog.cpp:326 phrasebook/phrasebookdialog.cpp:327
+msgid "Adds a new phrase"
+msgstr "增加一個新片語"
+
+#: phrasebook/phrasebookdialog.cpp:329
+msgid "New Phrase &Book"
+msgstr "新片語書(&B)"
+
+#: phrasebook/phrasebookdialog.cpp:330 phrasebook/phrasebookdialog.cpp:331
+msgid "Adds a new phrase book into which other books and phrases can be placed"
+msgstr "增加新片語書到其他書及片語可以存放的地方"
+
+#: phrasebook/phrasebookdialog.cpp:334 phrasebook/phrasebookdialog.cpp:335
+msgid "Saves the phrase book onto the hard disk"
+msgstr "儲存片語書至硬碟"
+
+#: phrasebook/phrasebookdialog.cpp:337 phrasebook/phrasebookdialog.cpp:341
+msgid "&Import..."
+msgstr "匯入(&I)..."
+
+#: phrasebook/phrasebookdialog.cpp:338 phrasebook/phrasebookdialog.cpp:339
+#: phrasebook/phrasebookdialog.cpp:342 phrasebook/phrasebookdialog.cpp:343
+msgid "Imports a file and adds its contents to the phrase book"
+msgstr "輸入檔案並把內容加到片語書"
+
+#: phrasebook/phrasebookdialog.cpp:345
+msgid "I&mport Standard Phrase Book"
+msgstr "輸入標準片語書(&M)"
+
+#: phrasebook/phrasebookdialog.cpp:346 phrasebook/phrasebookdialog.cpp:347
+msgid "Imports a standard phrase book and adds its contents to the phrase book"
+msgstr "輸入標準片語書並把內容加到片語書"
+
+#: phrasebook/phrasebookdialog.cpp:349
+msgid "&Export..."
+msgstr "輸出(&E)..."
+
+#: phrasebook/phrasebookdialog.cpp:350 phrasebook/phrasebookdialog.cpp:351
+msgid "Exports the currently selected phrase(s) or phrase book(s) into a file"
+msgstr "把目前選擇的片語或片語書輸出到檔案"
+
+#: phrasebook/phrasebookdialog.cpp:354 phrasebook/phrasebookdialog.cpp:355
+msgid "Prints the currently selected phrase(s) or phrase book(s)"
+msgstr "列印目前的所選的片語或片語書"
+
+#: phrasebook/phrasebookdialog.cpp:358 phrasebook/phrasebookdialog.cpp:359
+msgid "Closes the window"
+msgstr "關閉視窗"
+
+#: phrasebook/phrasebookdialog.cpp:363 phrasebook/phrasebookdialog.cpp:364
+msgid ""
+"Cuts the currently selected entries from the phrase book and puts it to the "
+"clipboard"
+msgstr "把目前從片語書選取的條目剪下到剪貼簿"
+
+#: phrasebook/phrasebookdialog.cpp:367 phrasebook/phrasebookdialog.cpp:368
+msgid ""
+"Copies the currently selected entry from the phrase book to the clipboard"
+msgstr "把目前從片語書選取的條目複製到剪貼簿"
+
+#: phrasebook/phrasebookdialog.cpp:375 phrasebook/phrasebookdialog.cpp:376
+msgid "Deletes the selected entries from the phrase book"
+msgstr "刪除從片語書選取的條目"
+
+#: phrasebook/phrasebookdialog.cpp:526
+msgid "Name of the &phrase book:"
+msgstr "片語書的名稱(&P):"
+
+#: phrasebook/phrasebookdialog.cpp:545
+msgid ""
+"<qt>There are unsaved changes."
+"<br>Do you want to apply the changes before closing the \"phrase book\" window "
+"or discard the changes?</qt>"
+msgstr "<qt>有變更尚未儲存。<br>關閉片語書視窗之前，您要套用變更還是要放棄變更？</qt>"
+
+#: phrasebook/phrasebookdialog.cpp:546
+msgid "Closing \"Phrase Book\" Window"
+msgstr "關閉片語書視窗"
+
+#: phrasebook/phrasebookdialog.cpp:598
+msgid ""
+"In order to use the '%1' key as a shortcut, it must be combined with the Win, "
+"Alt, Ctrl, and/or Shift keys."
+msgstr "要使用'%1'鍵作為快速鍵，必須和Win, Alt, Ctrl, 及/或 Shift 等鍵合併使用。"
+
+#: phrasebook/phrasebookdialog.cpp:601
+msgid "Invalid Shortcut Key"
+msgstr "無效的快速鍵"
+
+#: phrasebook/phrasebookdialog.cpp:695
+msgid "(New Phrase Book)"
+msgstr "（新片語書）"
+
+#: phrasebook/phrasebookdialog.cpp:706
+msgid "(New Phrase)"
+msgstr "（新片語）"
+
+#: phrasebook/phrasebook.cpp:258 phrasebook/phrasebookdialog.cpp:723
+msgid ""
+"*.phrasebook|Phrase Books (*.phrasebook)\n"
+"*.txt|Plain Text Files (*.txt)\n"
+"*|All Files"
+msgstr ""
+"*.phrasebook|片語書 (*.phrasebook)\n"
+"*.txt|純文字檔 (*.txt)\n"
+"*|所有檔案"
+
+#: phrasebook/phrasebookdialog.cpp:723
+msgid "Import Phrasebook"
+msgstr "輸入片語書"
+
+#: phrasebook/phrasebookdialog.cpp:734 phraselist.cpp:475
+#, c-format
+msgid ""
+"There was an error loading file\n"
+"%1"
+msgstr ""
+"讀取檔案錯誤\n"
+"%1"
+
+#: phrasebook/phrasebookdialog.cpp:743
+msgid "Export Phrase Book"
+msgstr "輸出片語書"
+
+#: phrasebook/phrasebookdialog.cpp:744 phraselist.cpp:449
+#, c-format
+msgid ""
+"There was an error saving file\n"
+"%1"
+msgstr ""
+"儲存檔案錯誤\n"
+"%1"
+
+#: phrasebook/phrasebook.cpp:260
+msgid ""
+"*.txt|Plain Text Files (*.txt)\n"
+"*.phrasebook|Phrase Books (*.phrasebook)\n"
+"*|All Files"
+msgstr ""
+"*.txt|純文字檔 (*.txt)\n"
+"*.phrasebook|片語書 (*.phrasebook)\n"
+"*|所有檔案"
+
+#: phrasebook/phrasebook.cpp:289
+msgid ""
+"Your chosen filename <i>%1</i> has a different extension than <i>.phrasebook</i>"
+". Do you wish to add <i>.phrasebook</i> to the filename?"
+msgstr ""
+"您選擇的檔案名稱 <i>%1</i> 延伸檔名與 <i>.phrasebook</i>不同。是否把 <i>.phrasebook</i> 加到檔案名稱？"
+
+#: phrasebook/phrasebook.cpp:290 phrasebook/phrasebook.cpp:306
+msgid "File Extension"
+msgstr "檔案延伸檔名"
+
+#: phrasebook/phrasebook.cpp:290
+msgid "Do Not Add"
+msgstr "不要"
+
+#: phrasebook/phrasebook.cpp:305
+msgid ""
+"Your chosen filename <i>%1</i> has the extension <i>.phrasebook</i>"
+". Do you wish to save in phrasebook format?"
+msgstr "您選擇的檔案名稱 <i>%1</i> 有 <i>.phrasebook</i> 延伸檔名。您是否要以片語書格式儲存？"
+
+#: phrasebook/phrasebook.cpp:306
+msgid "As Phrasebook"
+msgstr "以片語書"
+
+#: phrasebook/phrasebook.cpp:306
+msgid "As Plain Text"
+msgstr "以純文字"
+
+#: phrasebook/phrasetree.cpp:470
+msgid ""
+"The '%1' key combination has already been allocated to %2.\n"
+"Please choose a unique key combination."
+msgstr ""
+"'%1' 按鍵組合已經分配給 %2。\n"
+"請選擇獨特的按鍵組合。"
+
+#: phrasebook/phrasetree.cpp:488
+msgid "the standard \"%1\" action"
+msgstr "標準的 \"%1\"動作"
+
+#: phrasebook/phrasetree.cpp:489
+msgid "Conflict with Standard Application Shortcut"
+msgstr "與標準應用程序快速鍵相衝突"
+
+#: phrasebook/phrasetree.cpp:504
+msgid "the global \"%1\" action"
+msgstr "整體性的\"%1\"動作"
+
+#: phrasebook/phrasetree.cpp:505
+msgid "Conflict with Global Shortcuts"
+msgstr "與整體性的快速鍵相衝突"
+
+#: phrasebook/phrasetree.cpp:520
+msgid "an other phrase"
+msgstr "另一片語"
+
+#: phrasebook/phrasetree.cpp:521
+msgid "Key Conflict"
+msgstr "按鍵衝突"
+
+#: configwizard.cpp:37
+msgid "Initial Configuration - KMouth"
+msgstr "初始組態-Kmouth"
+
+#: configwizard.cpp:57
+msgid "Text-to-Speech Configuration"
+msgstr "本文轉語音組態"
+
+#: configwizard.cpp:71
+msgid "Initial Phrase Book"
+msgstr "初始片語書"
+
+#: phraselist.cpp:56
+msgid ""
+"This list contains the history of spoken sentences. You can select sentences "
+"and press the speak button for re-speaking."
+msgstr "這個列表包含已朗讀句子的歷史紀錄。您可以選擇句子並按下朗讀按鈕來再次朗讀。"
+
+#: phraselist.cpp:74
+msgid ""
+"Into this edit field you can type a phrase. Click on the speak button in order "
+"to speak the entered phrase."
+msgstr "您可以進入編輯區打入片語。按下朗讀按鈕以朗讀輸入的片語。"
+
+#: phraselist.cpp:454
+msgid ""
+"*|All Files\n"
+"*.phrasebook|Phrase Books (*.phrasebook)\n"
+"*.txt|Plain Text Files (*.txt)"
+msgstr ""
+"*|所有檔案\n"
+"*.phrasebook|片語書 (*.phrasebook)\n"
+"*.txt|純文字檔 (*.txt)"
+
+#: phraselist.cpp:454
+msgid "Open File as History"
+msgstr "打開檔案為歷史紀錄"
+
+#~ msgid "(New phrase book)"
+#~ msgstr "（新片語書）"
+
+#~ msgid "Form1"
+#~ msgstr "表格1"
+
+#~ msgid "Empty list"
+#~ msgstr "清除列表"
diff --git a/tde-i18n-zh_TW/messages/tdeaccessibility/ksayit.po b/tde-i18n-zh_TW/messages/tdeaccessibility/ksayit.po
new file mode 100644
index 00000000000..6688cde95a6
--- /dev/null
+++ b/tde-i18n-zh_TW/messages/tdeaccessibility/ksayit.po
@@ -0,0 +1,428 @@
+# translation of ksayit.po to Traditional Chinese
+#
+# Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv dot tw>, 2006.
+msgid ""
+msgstr ""
+"Project-Id-Version: ksayit\n"
+"POT-Creation-Date: 2008-07-08 01:24+0200\n"
+"PO-Revision-Date: 2006-06-06 10:28+0800\n"
+"Last-Translator: Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv "
+"dot tw>\n"
+"Language-Team: Traditional Chinese <zh_l10n@linux.org.tw>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: KBabel 1.11.2\n"
+
+#: _translatorinfo.cpp:1
+msgid ""
+"_: NAME OF TRANSLATORS\n"
+"Your names"
+msgstr "Frank Weng (a.k.a. Franklin)"
+
+#: _translatorinfo.cpp:3
+msgid ""
+"_: EMAIL OF TRANSLATORS\n"
+"Your emails"
+msgstr "franklin at goodhorse dot idv dot tw"
+
+#: contextmenuhandler.cpp:100
+msgid "New"
+msgstr "新增"
+
+#: contextmenuhandler.cpp:159
+msgid "Rename..."
+msgstr "重新命名..."
+
+#: contextmenuhandler.cpp:163
+msgid "Delete..."
+msgstr "刪除..."
+
+#: contextmenuhandler.cpp:167 docbookclasses.cpp:133 docbookclasses.cpp:135
+#: docbookparser.cpp:91 doctreeviewimpl.cpp:799
+msgid "Overview"
+msgstr "概述"
+
+#. i18n: file DocTreeView.ui line 45
+#: contextmenuhandler.cpp:171 docbookparser.cpp:298 doctreeviewimpl.cpp:51
+#: doctreeviewimpl.cpp:812 rc.cpp:12
+#, no-c-format
+msgid "Chapter"
+msgstr "章"
+
+#: contextmenuhandler.cpp:175 docbookclasses.cpp:462 docbookclasses.cpp:464
+#: docbookparser.cpp:243 doctreeviewimpl.cpp:831
+msgid "Keywords"
+msgstr "關鍵字"
+
+#: contextmenuhandler.cpp:179 doctreeviewimpl.cpp:845
+msgid "Keyword"
+msgstr "關鍵字"
+
+#: contextmenuhandler.cpp:183 docbookclasses.cpp:583 docbookclasses.cpp:585
+#: docbookparser.cpp:277 doctreeviewimpl.cpp:865
+msgid "Abstract"
+msgstr "摘要"
+
+#: contextmenuhandler.cpp:187
+msgid "Authors"
+msgstr "作者"
+
+#: contextmenuhandler.cpp:191 docbookclasses.cpp:377 docbookclasses.cpp:379
+#: docbookparser.cpp:228 doctreeviewimpl.cpp:908
+msgid "Author"
+msgstr "作者"
+
+#: contextmenuhandler.cpp:195 docbookclasses.cpp:188 docbookclasses.cpp:190
+#: docbookparser.cpp:124 doctreeviewimpl.cpp:926
+msgid "Date"
+msgstr "日期"
+
+#: contextmenuhandler.cpp:199
+msgid "Release Info"
+msgstr "釋出資訊"
+
+#: contextmenuhandler.cpp:203
+msgid "Title"
+msgstr "標題"
+
+#: contextmenuhandler.cpp:207 docbookclasses.cpp:640 docbookparser.cpp:475
+#: doctreeviewimpl.cpp:593 doctreeviewimpl.cpp:981
+msgid "Paragraph"
+msgstr "段"
+
+#: contextmenuhandler.cpp:211 docbookparser.cpp:328 doctreeviewimpl.cpp:994
+msgid "Section Level 1"
+msgstr "小節等級 1"
+
+#: contextmenuhandler.cpp:215 docbookparser.cpp:358 doctreeviewimpl.cpp:1011
+msgid "Section Level 2"
+msgstr "小節等級 2"
+
+#: contextmenuhandler.cpp:219 docbookparser.cpp:388 doctreeviewimpl.cpp:1028
+msgid "Section Level 3"
+msgstr "小節等級 3"
+
+#: contextmenuhandler.cpp:223 docbookparser.cpp:418 docbookparser.cpp:448
+#: doctreeviewimpl.cpp:1045
+msgid "Section Level 4"
+msgstr "小節等級 4"
+
+#: contextmenuhandler.cpp:227 doctreeviewimpl.cpp:1062
+msgid "Section Level 5"
+msgstr "小節等級 5"
+
+#: docbookclasses.cpp:68 docbookclasses.cpp:70 doctreeviewimpl.cpp:111
+msgid "unnamed"
+msgstr "未命名"
+
+#: docbookclasses.cpp:255 docbookclasses.cpp:257 docbookparser.cpp:142
+#: doctreeviewimpl.cpp:947
+msgid "Release"
+msgstr "釋出"
+
+#: docbookclasses.cpp:322 docbookclasses.cpp:324 docbookparser.cpp:178
+#: doctreeviewimpl.cpp:885
+msgid "Author(s)"
+msgstr "作者"
+
+#. i18n: file DocTreeView.ui line 56
+#: doctreeviewimpl.cpp:52 rc.cpp:15
+#, no-c-format
+msgid "Info"
+msgstr "資訊"
+
+#: doctreeviewimpl.cpp:136
+msgid "Empty Document"
+msgstr "空白文件"
+
+#: doctreeviewimpl.cpp:188
+msgid "Unable to open File."
+msgstr "無法開啟檔案。"
+
+#: doctreeviewimpl.cpp:241 doctreeviewimpl.cpp:254
+msgid "Plain File"
+msgstr "普通檔案"
+
+#: doctreeviewimpl.cpp:251
+msgid "Failed wrapping the file into XML."
+msgstr "將檔案包裝成 XML 失敗。"
+
+#: doctreeviewimpl.cpp:264
+msgid "The file is of type %1, 'book' expected."
+msgstr "檔案型態為 %1，應該要是 book。"
+
+#: doctreeviewimpl.cpp:284
+msgid "Save File"
+msgstr "儲存檔案"
+
+#: doctreeviewimpl.cpp:289
+msgid "The given URL is invalid. Try 'File save as...' instead."
+msgstr "所給的網址不正確。請試著使用「另存新檔」。"
+
+#: doctreeviewimpl.cpp:295 doctreeviewimpl.cpp:342
+msgid "Unable open file to write."
+msgstr "無法開啟檔案以寫入。"
+
+#: doctreeviewimpl.cpp:316 doctreeviewimpl.cpp:365
+msgid "Save operation currently works on local files only."
+msgstr "儲存功能目前只能用於本地端檔案。"
+
+#: doctreeviewimpl.cpp:332
+msgid "Save File As"
+msgstr "另存新檔"
+
+#: doctreeviewimpl.cpp:336
+msgid "The given URL is invalid."
+msgstr "所給的網址不正確。"
+
+#: doctreeviewimpl.cpp:471
+msgid ""
+"Maybe the structure of the document has been changed. Please check if this "
+"bookmark is still valid."
+msgstr "也許此文件的結構已改變。請檢查此書籤是否還正確。"
+
+#: doctreeviewimpl.cpp:480
+msgid ""
+"Bookmark not found. Maybe the file content or the bookmark URL has been "
+"changed."
+msgstr "找不到書籤。也許檔案內容或書籤的網址已經改變。"
+
+#: doctreeviewimpl.cpp:737
+msgid "Rename Item"
+msgstr "重新命名項目"
+
+#: doctreeviewimpl.cpp:738
+msgid "Please enter the new name of the item:"
+msgstr "請輸入新名稱："
+
+#: doctreeviewimpl.cpp:815
+msgid "New Chapter Title"
+msgstr "新增章節標題"
+
+#: doctreeviewimpl.cpp:848
+msgid "New Keyword"
+msgstr "新增關鍵字"
+
+#: doctreeviewimpl.cpp:909
+msgid "Firstname Surname"
+msgstr "姓 名"
+
+#: doctreeviewimpl.cpp:997 doctreeviewimpl.cpp:1014 doctreeviewimpl.cpp:1031
+#: doctreeviewimpl.cpp:1048 doctreeviewimpl.cpp:1065
+msgid "New Section Title"
+msgstr "新增小節標題"
+
+#: ksayit.cpp:159 ksayitsystemtray.cpp:54
+msgid "Say"
+msgstr "朗讀"
+
+#: ksayit.cpp:165 ksayitsystemtray.cpp:68
+msgid "Pause"
+msgstr "暫停"
+
+#: ksayit.cpp:171 ksayitsystemtray.cpp:61
+msgid "Shut Up"
+msgstr "停止"
+
+#: ksayit.cpp:177 ksayitsystemtray.cpp:75
+msgid "Next Sentence"
+msgstr "下一句"
+
+#: ksayit.cpp:184 ksayitsystemtray.cpp:83
+msgid "Previous Sentence"
+msgstr "上一句"
+
+#: ksayit.cpp:196
+msgid "Edit Text"
+msgstr "編輯文字"
+
+#: ksayit.cpp:316 ksayit.cpp:557 ksayit.cpp:577 ksayit.cpp:773
+msgid "Ready."
+msgstr "已就緒。"
+
+#: ksayit.cpp:401
+msgid "Say XML file..."
+msgstr "朗讀 XML 檔..."
+
+#: ksayit.cpp:435 ksayit.cpp:672
+msgid "Edit Mode ON."
+msgstr "編輯模式開啟。"
+
+#: ksayit.cpp:438
+msgid "Edit Mode OFF."
+msgstr "編輯模式關閉。"
+
+#: ksayit.cpp:470
+msgid "Open file..."
+msgstr "開啟檔案..."
+
+#: ksayit.cpp:476
+msgid "File to Speak"
+msgstr "要朗讀的檔案"
+
+#: ksayit.cpp:502
+msgid "Save file..."
+msgstr "儲存檔案..."
+
+#: ksayit.cpp:519
+msgid "Save file as..."
+msgstr "另存新檔..."
+
+#: ksayit.cpp:551
+msgid "Exiting..."
+msgstr "離開中..."
+
+#: ksayit.cpp:552
+msgid "Do you really want to quit?"
+msgstr "您確定要離開嗎？"
+
+#: ksayit.cpp:570
+msgid "Toggle the statusbar..."
+msgstr "切換狀態列..."
+
+#: ksayit.cpp:598
+msgid "Setup"
+msgstr "設定"
+
+#: ksayit.cpp:686
+msgid "speaking Clipboard..."
+msgstr "朗讀剪貼簿內容..."
+
+#: ksayit.cpp:704
+msgid "synthesizing..."
+msgstr "合成中..."
+
+#: ksayit.cpp:744
+msgid "Unable to speak text"
+msgstr "無法朗讀文字"
+
+#: ksayit.cpp:792
+msgid "Paused..."
+msgstr "暫停..."
+
+#: ksayitbookmarkhandler.cpp:59
+msgid ""
+"This is not a KSayIt bookmark.\n"
+msgstr ""
+"這不是 KSayIt 書籤。\n"
+
+#: ksayitbookmarkhandler.cpp:77
+msgid "Bookmark not found"
+msgstr "找不到書籤"
+
+#: ksayitbookmarkhandler.cpp:88
+msgid "untitled"
+msgstr "未命名"
+
+#: main.cpp:36
+msgid "KSayIt - A Text To Speech frontend for KDE"
+msgstr "KSayIt - KDE 朗讀文字的前端介面"
+
+#: main.cpp:43
+msgid "KSayIt"
+msgstr "KSayIt"
+
+#. i18n: file ksayitui.rc line 14
+#: rc.cpp:3
+#, no-c-format
+msgid "&Action"
+msgstr "動作(&A)"
+
+#. i18n: file DocTreeView.ui line 30
+#: rc.cpp:9
+#, no-c-format
+msgid "Document Contents"
+msgstr "文件內容"
+
+#. i18n: file DocTreeView.ui line 78
+#: rc.cpp:21
+#, no-c-format
+msgid "Hidden"
+msgstr "隱藏"
+
+#. i18n: file fx_setup.ui line 16
+#: rc.cpp:24
+#, no-c-format
+msgid "Effect Stack Setup"
+msgstr "效果堆疊設定"
+
+#. i18n: file fx_setup.ui line 46
+#: rc.cpp:27
+#, no-c-format
+msgid "Available:"
+msgstr "可使用："
+
+#. i18n: file fx_setup.ui line 153
+#: rc.cpp:30
+#, no-c-format
+msgid "Active:"
+msgstr "啟動："
+
+#. i18n: file fx_setup.ui line 167
+#: rc.cpp:33
+#, no-c-format
+msgid "Doubleclick opens the setup dialog."
+msgstr "雙擊以開啟設定對話框。"
+
+#. i18n: file fx_setup.ui line 204
+#: rc.cpp:36
+#, no-c-format
+msgid "Remove All"
+msgstr "全部移除"
+
+#: saxhandler.cpp:129
+msgid ""
+"Fatal error while parsing XML-Paragraph:\n"
+msgstr ""
+"分析 XML 段落時發生嚴重錯誤：\n"
+
+#: saxhandler.cpp:130
+msgid "%1, Line: %2"
+msgstr "%1，第 %2 行"
+
+#: saxhandler.cpp:131
+msgid "Fatal error"
+msgstr "嚴重錯誤"
+
+#: saxhandler.cpp:163
+msgid ""
+"Unresolved entity found: %1.\n"
+msgstr ""
+"找到無法反解的實體：%1\n"
+
+#: saxhandler.cpp:164
+msgid "KSayIt does not support DocBook files with external entities. "
+msgstr "KSayIt 不支援外部 DocBook 檔案實體。"
+
+#: saxhandler.cpp:165
+msgid "Parsing can continue, but the resulting text will contain gaps."
+msgstr "可以繼續分析，但是結果可能會不順暢。"
+
+#: saxhandler.cpp:169
+msgid "Parser problem"
+msgstr "分析問題"
+
+#: voicesetupdlg.cpp:70
+msgid "Voice"
+msgstr "語音"
+
+#: voicesetupdlg.cpp:70
+msgid "Voice Settings"
+msgstr "語音設定"
+
+#: voicesetupdlg.cpp:81
+msgid "Audio FX"
+msgstr "聲音 FX"
+
+#: voicesetupdlg.cpp:81
+msgid "Effect Stack"
+msgstr "效果堆疊"
+
+#: voicesetupdlg.cpp:112
+msgid "The active TTS system does not make use of aRts effects."
+msgstr "開啟的 TTS 系統不是使用 aRts 效果。"
+
+#: voicesetupdlg.cpp:113
+msgid "Plugin Configuration"
+msgstr "外掛程式設定"
diff --git a/tde-i18n-zh_TW/messages/tdeaccessibility/kttsd.po b/tde-i18n-zh_TW/messages/tdeaccessibility/kttsd.po
new file mode 100644
index 00000000000..9560a80f6fe
--- /dev/null
+++ b/tde-i18n-zh_TW/messages/tdeaccessibility/kttsd.po
@@ -0,0 +1,2964 @@
+# translation of kttsd.po to Chinese Traditional
+#
+# Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv dot tw>, 2006.
+msgid ""
+msgstr ""
+"Project-Id-Version: kttsd\n"
+"POT-Creation-Date: 2008-07-08 01:24+0200\n"
+"PO-Revision-Date: 2006-11-04 13:58+0800\n"
+"Last-Translator: Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv "
+"dot tw>\n"
+"Language-Team: Chinese Traditional <zh-l10n@linux.org.tw>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: KBabel 1.11.4\n"
+
+#. i18n: file kcmkttsmgr/addtalkerwidget.ui line 16
+#: kcmkttsmgr/kcmkttsmgr.cpp:1220 rc.cpp:9
+#, no-c-format
+msgid "Add Talker"
+msgstr "新增發音員"
+
+#. i18n: file kcmkttsmgr/addtalkerwidget.ui line 49
+#: rc.cpp:12 rc.cpp:21
+#, no-c-format
+msgid "Select the speech synthesizer to do the speaking."
+msgstr "選擇要發音的語音合成器。"
+
+#. i18n: file kcmkttsmgr/addtalkerwidget.ui line 69
+#: rc.cpp:15 rc.cpp:33
+#, no-c-format
+msgid ""
+"Select the language to be spoken.  Note that after you configure a Talker, your "
+"chosen Language may be overridden by the synthesizer, depending upon the "
+"options you choose."
+msgstr "選擇要發音的語言。注意，在您設定發音員之後，您所選擇的語言可能依據選項而被合成器蓋過。"
+
+#. i18n: file kcmkttsmgr/addtalkerwidget.ui line 95
+#: rc.cpp:18 rc.cpp:423
+#, no-c-format
+msgid "&Synthesizer:"
+msgstr "合成器(&S)："
+
+#. i18n: file kcmkttsmgr/addtalkerwidget.ui line 186
+#: rc.cpp:24
+#, no-c-format
+msgid "Show All"
+msgstr "全部顯示"
+
+#. i18n: file kcmkttsmgr/addtalkerwidget.ui line 192
+#: rc.cpp:27
+#, no-c-format
+msgid ""
+"The radio buttons below determine which box shows all possibilities.  The box "
+"to the left of the checked button shows all possibilities.  The box to the left "
+"of the unchecked box only shows those possibilities that match the other box."
+msgstr "底下的圓鈕決定哪個盒子裡顯示所有的可用的選項。勾選的選項左方會顯示所有的選項。而另一邊則只會顯示符合所選取設定的選項。"
+
+#. i18n: file kcmkttsmgr/addtalkerwidget.ui line 200
+#: rc.cpp:30 rc.cpp:435
+#, no-c-format
+msgid "&Language:"
+msgstr "語言(&L)："
+
+#. i18n: file kcmkttsmgr/addtalkerwidget.ui line 227
+#: rc.cpp:36
+#, no-c-format
+msgid ""
+"Check to list all the possible languages in the Language box at the left.  When "
+"a language has been chosen, the Synthesizer box will show only those "
+"synthesizers that can speak in the chosen language."
+msgstr "勾選後在左方語言盒中會列出所有可用的語言。選取語言之後，合成器盒中則會顯示該語言可使用的合成器。"
+
+#. i18n: file kcmkttsmgr/addtalkerwidget.ui line 241
+#: rc.cpp:39
+#, no-c-format
+msgid ""
+"Check this box to display all the available synthesizers in the Synthesizer box "
+"to the left.  When a synthesizer is chosen, only the languages that can be "
+"spoken by that synthesizer appear in the Language box."
+msgstr "勾選後在左方合成器盒中會列出所有可用的合成器。選取合成器之後，語言盒中則會顯示該合成器可發音的語言。"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 45
+#: rc.cpp:42
+#, no-c-format
+msgid "&General"
+msgstr "一般(&G)"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 56
+#: rc.cpp:45
+#, no-c-format
+msgid "&Enable Text-to-Speech System (KTTSD)"
+msgstr "開啟文字發音系統(KTTSD)(&E)"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 59
+#: rc.cpp:48
+#, no-c-format
+msgid "Check to start the KTTS Deamon and enable Text-to-Speech."
+msgstr "勾選以開啟 KTTS 守護程式及開啟文字發音系統。"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 67
+#: rc.cpp:51
+#, no-c-format
+msgid "Always em&bed Text-to-Speech Manager in system tray"
+msgstr "永遠將文字發音系統管理員嵌入系統匣中(&B)"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 73
+#: rc.cpp:54
+#, no-c-format
+msgid ""
+"When checked, KTTSMgr displays an icon in the system tray, and clicking OK or "
+"Cancel buttons does not stop KTTSMgr.  Use system tray context menu to quit "
+"KTTSMgr.  This setting takes effect when KTTSMgr is next started.  This setting "
+"has no effect when running in the KDE Control Center."
+msgstr ""
+"勾選此選項的話，KTTSMgr 會顯示在系統匣中，按下「確定」或「取消」不會停止 KTTSMgr，要點選系統匣圖示的選單才能離開 "
+"KTTSMgr。這個設定在下次啟動時生效，在 KDE 控制中心中執行時則不會有作用。"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 123
+#: rc.cpp:57
+#, no-c-format
+msgid "Show &main window on startup"
+msgstr "啟動時顯示主畫面(&M)"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 129
+#: rc.cpp:60
+#, no-c-format
+msgid ""
+"When checked, the KTTSMgr window is displayed when KTTSMgr starts.  When "
+"unchecked, click on the icon in the system tray to display the KTTSMgr window."
+msgstr "勾選此選項的話，KTTSMgr 啟動時會顯示主視窗。此外，您也可以點選系統匣中的圖示來顯示主視窗。"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 164
+#: rc.cpp:63
+#, no-c-format
+msgid "E&xit when speaking is finished"
+msgstr "發音完畢時離開(&X)"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 170
+#: rc.cpp:66
+#, no-c-format
+msgid ""
+"When checked, and KTTSMgr was automatically started when speech began, "
+"automatically exits when speech has finished.  Does not automatically exit if "
+"KTTSMgr was started manually or started from the Control Center."
+msgstr ""
+"勾選此選項的話，KTTSMgr 在開始讀字時會自動啟動，發音結束後自動離開。但是若 KTTSMgr 是手動啟動的，或是從控制中心啟動的，就不會自動離開。"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 180
+#: rc.cpp:69
+#, no-c-format
+msgid "Sta&rt minimized in system tray when speaking"
+msgstr "開始讀字時啟動並嵌入系統匣中(&R)"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 186
+#: rc.cpp:72
+#, no-c-format
+msgid ""
+"When checked, if KTTSMgr is not already running and speech begins, starts "
+"KTTSMgr and displays an icon in the system tray.  <em>Note<em>"
+": KTTSMgr only automatically starts for text jobs having 5 sentences or more."
+msgstr ""
+"勾選此選項的話，如果 KTTSMgr 尚未執行，則在開始讀字時會啟動 KTTSMgr 並在系統匣中顯示圖示。注意：KTTSMgr "
+"只會在有五句以上文字需要閱讀時才會啟動。"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 196
+#: rc.cpp:75
+#, no-c-format
+msgid "&Talkers"
+msgstr "發音員(&T)"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 205
+#: rc.cpp:78
+#, no-c-format
+msgid "ID"
+msgstr "代號"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 216
+#: filters/sbd/sbdconf.cpp:239
+#: filters/stringreplacer/stringreplacerconf.cpp:424
+#: kcmkttsmgr/kcmkttsmgr.cpp:1243 libkttsd/selecttalkerdlg.cpp:166 rc.cpp:81
+#: rc.cpp:453
+#, no-c-format
+msgid "Language"
+msgstr "語言"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 227
+#: rc.cpp:84 rc.cpp:456
+#, no-c-format
+msgid "Speech Synthesizer"
+msgstr "語音合成器"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 238
+#: rc.cpp:87 rc.cpp:459
+#, no-c-format
+msgid "Voice"
+msgstr "聲音"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 249
+#: rc.cpp:90 rc.cpp:462 rc.cpp:1198
+#, no-c-format
+msgid "Gender"
+msgstr "性別"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 260
+#: rc.cpp:93 rc.cpp:465
+#, no-c-format
+msgid "Volume"
+msgstr "音量"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 271
+#: rc.cpp:96 rc.cpp:468
+#, no-c-format
+msgid "Rate"
+msgstr "頻率"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 284
+#: rc.cpp:99 rc.cpp:471
+#, no-c-format
+msgid ""
+"This is a list of all the configured Talkers.  A Talker is a speech synthesizer "
+"that has been configured with a language, voice, gender, speaking rate, and "
+"volume.  Talkers higher in the list have higher priority.  The topmost Talker "
+"will be used when no talker attributes have been specified by an application."
+msgstr ""
+"這個清單包括所有已設定的發音員。發音員是已設定好語言、聲音、性別、說話頻率與音量的語音合成器。清單中較高位置的發音員有較高的優先權。沒有特別指定發音員屬性的應用"
+"程式會使用最頂端的發音員。"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 308
+#: rc.cpp:102 rc.cpp:150 rc.cpp:234
+#, no-c-format
+msgid "Add..."
+msgstr "新增..."
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 314
+#: rc.cpp:105
+#, no-c-format
+msgid "Click to add and configure a new Talker (speech synthesizer)."
+msgstr "點選以新增並設定新的發音員（語音合成器）。"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 331
+#: kcmkttsmgr/kcmkttsmgr.cpp:168 rc.cpp:108 rc.cpp:240
+#, no-c-format
+msgid "U&p"
+msgstr "向上(&P)"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 347
+#: kcmkttsmgr/kcmkttsmgr.cpp:170 rc.cpp:111 rc.cpp:246 rc.cpp:663
+#, no-c-format
+msgid "Do&wn"
+msgstr "向下(&W)"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 366
+#: kcmkttsmgr/kcmkttsmgr.cpp:166 rc.cpp:114 rc.cpp:252 rc.cpp:669
+#, no-c-format
+msgid "&Edit..."
+msgstr "編輯(&E)..."
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 372
+#: rc.cpp:117
+#, no-c-format
+msgid "Click to configure options for the highlighted Talker."
+msgstr "點選以設定所選取的發音員的選項。"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 397
+#: rc.cpp:123
+#, no-c-format
+msgid "Click to remove the highlighted Talker."
+msgstr "點選以移除所選取的發音員。"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 426
+#: rc.cpp:126
+#, no-c-format
+msgid "&Notifications"
+msgstr "通知(&N)"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 452
+#: rc.cpp:129
+#, no-c-format
+msgid "Application/Event"
+msgstr "應用程式/事件"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 463
+#: rc.cpp:132
+#, no-c-format
+msgid "Action"
+msgstr "動作"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 474
+#: rc.cpp:135
+#, no-c-format
+msgid "Talker"
+msgstr "發音員"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 493
+#: rc.cpp:138
+#, no-c-format
+msgid ""
+"This is a list of configured application events and actions to be taken when "
+"received.  The \"default\" event governs all events not specifically "
+"configured."
+msgstr "這分清單是設定接收到哪些應用程式的事件與動作時要讀出來。「預設」則是所有未特別設定的事件。"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 517
+#: rc.cpp:141
+#, no-c-format
+msgid "Notifications to speak:"
+msgstr "要唸的通知："
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 523
+#: rc.cpp:144 rc.cpp:147
+#, no-c-format
+msgid ""
+"Applies only to the default event.  Does not affect application-specific "
+"events.  Only events that display in the manner which you select will be "
+"spoken."
+msgstr "只套用到預設的事件。不影響應用程式相關的事件。只有顯示在這裡的所選取的事件才會被讀出來。"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 555
+#: rc.cpp:153
+#, no-c-format
+msgid "Click to configure notification for a specific application event."
+msgstr "點選以設定特別應用程式事件的通知。"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 563
+#: kttsjobmgr/kttsjobmgr.cpp:199 rc.cpp:156
+#, no-c-format
+msgid "Re&move"
+msgstr "移除(&M)"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 566
+#: rc.cpp:159
+#, no-c-format
+msgid ""
+"Click to remove a specific notification event from the list.  You cannot remove "
+"the default event."
+msgstr "點選以從清單中移除指定的通知事件。您無法移除預設事件。"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 591
+#: rc.cpp:162 rc.cpp:750
+#, no-c-format
+msgid "Cl&ear"
+msgstr "清除(&E)"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 594
+#: rc.cpp:165
+#, no-c-format
+msgid ""
+"Removes all the application specific events.  The default event remains."
+msgstr "移除所有的應用程式指定事件。預設事件則無法移除。"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 602
+#: rc.cpp:168 rc.cpp:738
+#, no-c-format
+msgid "&Load..."
+msgstr "載入(&L)..."
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 605
+#: rc.cpp:171
+#, no-c-format
+msgid "Click to read configured notification events from a file."
+msgstr "點選以從檔案中讀取所設定的事件通知。"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 613
+#: rc.cpp:174 rc.cpp:627 rc.cpp:744
+#, no-c-format
+msgid "&Save..."
+msgstr "儲存(&S)..."
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 616
+#: rc.cpp:177
+#, no-c-format
+msgid "Click to write all the configured application events to a file."
+msgstr "點選以將所有已設定的應用程式事件寫入檔案。"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 637
+#: rc.cpp:180
+#, no-c-format
+msgid "Click to test notification"
+msgstr "點選以測試通知"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 640
+#: rc.cpp:183
+#, no-c-format
+msgid ""
+"Click this button to test the notification.  A sample message will be spoken.  "
+"Note: The Text-to-Speech system must be enabled."
+msgstr "點選此鍵以測試通知。會讀出一個簡單的訊息。注意：必須先開啟文字發音系統。"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 656
+#: rc.cpp:186
+#, no-c-format
+msgid "Ac&tion:"
+msgstr "動作(&T)："
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 662
+#: rc.cpp:189 rc.cpp:192 rc.cpp:195
+#, no-c-format
+msgid ""
+"<qt>Specifies how KTTS should speak the event when received.  If you select "
+"\"Speak custom text\", enter the text in the box.  You may use the following "
+"substitution strings in the text:<dl><dt>%e</dt><dd>Name of the event</dd><dt>"
+"%a</dt><dd>Application that sent the event</dd><dt>%m</dt><dd>"
+"The message sent by the application</dd></dl></qt>"
+msgstr ""
+"<qt>指定 KTTS 在接收到事件時要怎麼讀。如果選擇「讀出自訂的文字」，則在欄位中輸入要讀出來的文字。您可以在文字中使用底下的代換符號： <dl> <dt>"
+"%e</dt><dd>事件名稱</dd> <dt>%a</dt><dd>送出此事件的應用程式</dd> <dt>%m</dt><dd>"
+"應用程式送出的訊息</dd> </dl></qt>"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 712
+#: rc.cpp:198
+#, no-c-format
+msgid "Talke&r:"
+msgstr "發音員(&R)："
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 718
+#: rc.cpp:201 rc.cpp:204
+#, no-c-format
+msgid ""
+"The Talker that will speak the notification.  The \"default\" Talker is the "
+"topmost talker listed on the Talkers tab."
+msgstr "要讀出此通知的發音員。「預設」發音員是指發音員清單中最頂端的發音員。"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 744
+#: rc.cpp:207 rc.cpp:441 rc.cpp:498 rc.cpp:531 rc.cpp:576 rc.cpp:612
+#: rc.cpp:714 rc.cpp:732
+#, no-c-format
+msgid "..."
+msgstr "..."
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 747
+#: rc.cpp:210
+#, no-c-format
+msgid "Click to select the Talker to speak the notification."
+msgstr "選擇要讀出通知的發音員。"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 767
+#: rc.cpp:213
+#, no-c-format
+msgid "Speak notifications (&KNotify)"
+msgstr "語音通知(KNotify)(&K)"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 770
+#: rc.cpp:216
+#, no-c-format
+msgid ""
+"When checked and KTTS is enabled, notification events from applications sent "
+"via KNotify will be spoken according to the options you set on this tab."
+msgstr "點選此項目而且 KTTS 已開啟的話，應用程式透過 KNotify 送出的通知事件會根據您在此設定的選項唸出來。"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 795
+#: rc.cpp:219
+#, no-c-format
+msgid "E&xclude notifications with a sound"
+msgstr "已有音效的通知排除在外(&X)"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 801
+#: rc.cpp:222
+#, no-c-format
+msgid "When checked, notification events that have a sound will not be spoken."
+msgstr "勾選此選項的話，已經有音效設定的事件通知就不會發音。"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 813
+#: rc.cpp:225
+#, no-c-format
+msgid "&Filters"
+msgstr "過濾器(&F)"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 830
+#: kcmkttsmgr/kcmkttsmgr.cpp:1437 rc.cpp:228
+#, no-c-format
+msgid "Filter"
+msgstr "過濾器"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 846
+#: rc.cpp:231
+#, no-c-format
+msgid ""
+"This is a list of all the configured Filters.  Filters higher in the list are "
+"applied first.  Filters modify text before it is spoken.  They can be used to "
+"substitute for mispronounced words, transform XML from one form to another, or "
+"change the default Talker to be used for speech output."
+msgstr ""
+"所有已設定的過濾器的清單。清單中較高位置的過濾器會先被套用。過濾器會在文字被讀出來之前先做更改。用於替換發音不正確的字，將 XML "
+"表格換成另一個，或是變更要使用的預設發音員等等。"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 876
+#: rc.cpp:237
+#, no-c-format
+msgid "Click to add and configure a new Filter."
+msgstr "點選以新增與設定新的過濾器."
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 896
+#: rc.cpp:243
+#, no-c-format
+msgid ""
+"Click to move selected filter up in the list.  Filters higher in the list are "
+"applied first."
+msgstr "點選以將所選取的過濾器往上移。較高的過濾器會先被套用。"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 915
+#: rc.cpp:249
+#, no-c-format
+msgid ""
+"Click to move a filter down in the list.  Filters lower in the list are applied "
+"last."
+msgstr "點選以將所選取的過濾器往下移。較低的過濾器被套用的順序就較後面。"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 940
+#: rc.cpp:255
+#, no-c-format
+msgid "Click to configure options for the highlighted Filter."
+msgstr "點選以設定所選取的過濾器選項。"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 965
+#: rc.cpp:261
+#, no-c-format
+msgid "Click to remove the highlighted Filter."
+msgstr "點選以移除所選取的過濾器。"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 1000
+#: rc.cpp:264
+#, no-c-format
+msgid "Sentence Boundary Detector"
+msgstr "句子邊界偵測器"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 1016
+#: rc.cpp:267
+#, no-c-format
+msgid ""
+"This is a list of all the configured Sentence Boundary Detector (SBD) Filters.  "
+"SBDs break long text jobs up into sentences, which reduces the time before a "
+"job begins speaking, and permits you to advance or rewind through a job.  SBDs "
+"are applied in the order listed (top to bottom) after all the normal filters at "
+"the top of this screen have been applied.  Filtering stops when the first SBD "
+"modifies the text."
+msgstr ""
+"這份清單包含所有的「句子邊界偵測」過濾器（Sentence Boundary Detector，SBD）。SBD "
+"會將需要發音的文字切成句子，以縮短發音前的準備工作，並允許您在發音過程中跳過或倒回。SBD 會在所有正常的過濾器套用之後依上到下的順序套用，當第一個 SBD "
+"改變文字後就停止。"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 1040
+#: rc.cpp:270
+#, no-c-format
+msgid "Co&nfigure"
+msgstr "設定(&N)"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 1043
+#: rc.cpp:273
+#, no-c-format
+msgid ""
+"Click this button to edit the Sentence Boundary Detector (SBD) configuration or "
+"add additional SBD filters."
+msgstr "點選此鍵以編輯或新增句子邊界偵測器。"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 1074
+#: rc.cpp:276
+#, no-c-format
+msgid "&Interruption"
+msgstr "中斷(&I)"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 1104
+#: rc.cpp:279 rc.cpp:294
+#, no-c-format
+msgid ""
+"Check the Pre-sound box and choose a Pre-sound audio file, which will sound "
+"when a text job is interrupted by another message."
+msgstr "勾選前置聲音選項並選取前置聲音音效檔，此聲音會在文字語音工作被另一個訊息中斷時播放。"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 1115
+#: rc.cpp:282 rc.cpp:288
+#, no-c-format
+msgid ""
+"Check the Post-message box and enter a Post-message, which will be spoken when "
+"a text job resumes after being interrupted by another message."
+msgstr "勾選後置訊息選項並輸入後置訊息，此訊息會在文字語音工作被另一個訊息中斷後，又恢復工作時讀出來。"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 1124
+#: rc.cpp:285
+#, no-c-format
+msgid "Post-&message:"
+msgstr "後置訊息(&M)："
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 1146
+#: rc.cpp:291
+#, no-c-format
+msgid "Pre-sou&nd:"
+msgstr "前置聲音(&N)："
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 1160
+#: rc.cpp:297
+#, no-c-format
+msgid "&Pre-message:"
+msgstr "前置訊息(&P)："
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 1169
+#: rc.cpp:300 rc.cpp:312
+#, no-c-format
+msgid ""
+"Check the Pre-message box and enter a Pre-message, which will be spoken "
+"whenever a text job is interrupted by another message."
+msgstr "勾選前置訊息選項並輸入前置訊息，此訊息會在文字語音工作被另一個訊息中斷時讀出來。"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 1188
+#: rc.cpp:303 rc.cpp:309
+#, no-c-format
+msgid ""
+"Check the Post-sound and choose a Post-sound audio file, which will sound "
+"before a text job resumes after being interrupted by another message."
+msgstr "勾選後置聲音選項並選取後置聲音音效檔，此聲音會在文字語音工作被另一個訊息中斷後，又恢復工作時讀出來。"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 1196
+#: rc.cpp:306
+#, no-c-format
+msgid "Post-s&ound:"
+msgstr "後置聲音(&O)："
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 1246
+#: rc.cpp:315
+#, no-c-format
+msgid "A&udio"
+msgstr "音效(&U)"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 1265
+#: rc.cpp:318
+#, no-c-format
+msgid "&Keep audio files:"
+msgstr "保留音效檔(&K)："
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 1268
+#: rc.cpp:321
+#, no-c-format
+msgid ""
+"Check this if you want to keep the generated audio (wav) files.  You will find "
+"them in the indicated directory."
+msgstr "此選項決定您是否要保留所產生的音效檔。您可以在指定的目錄中找到保留的檔案。"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 1287
+#: rc.cpp:324
+#, no-c-format
+msgid "Specify the directory in which the audio files will be copied."
+msgstr "指定音效檔要存放的目錄。"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 1313
+#: rc.cpp:327
+#, no-c-format
+msgid "&Speed:"
+msgstr "速度(&S)："
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 1319
+#: rc.cpp:330 rc.cpp:336 rc.cpp:339 rc.cpp:994 rc.cpp:1012 rc.cpp:1024
+#, no-c-format
+msgid ""
+"Sets the speed of speech.  Slide the slider to the left to slow speech down; to "
+"the right to increase talking speed.  Anything less than 75 percent is "
+"considered \"slow\", and anything greater than 125 percent is considered "
+"\"fast\".  You cannot change the speed of MultiSyn voices."
+msgstr ""
+"設定發音速度。滑動器左側表示慢速，右側表示快速。通常小於 75% 算是慢的，大於 125% 則算是快的。您無法改變 MultiSyn 聲音的速度。"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 1338
+#: rc.cpp:333 rc.cpp:883 rc.cpp:889 rc.cpp:1003 rc.cpp:1009 rc.cpp:1015
+#: rc.cpp:1120 rc.cpp:1135 rc.cpp:1150
+#, no-c-format
+msgid " %"
+msgstr " %"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 1431
+#: rc.cpp:342
+#, no-c-format
+msgid "Out&put Using"
+msgstr "輸出方法(&P)"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 1434
+#: rc.cpp:345
+#, no-c-format
+msgid ""
+"<p>Select the audio output method desired.  If you select <b>GStreamer</b>"
+", you must also select a <b>Sink</b>.</p>"
+"<p><em>Note</em>:  You must have GStreamer >= 0.87 to use GStreamer.</p>"
+msgstr ""
+"<p>選擇音效輸出方法。如果您選擇 <b>GStreamer</b>，您也要選擇 <b>接收器</b>（Sink）。</p> "
+"<p><em>注意：</em>您必須安裝 GStreamer 0.87 版以上。</p>"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 1456
+#: rc.cpp:348 rc.cpp:357
+#, no-c-format
+msgid "Sink:"
+msgstr "接收器："
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 1459
+#: rc.cpp:351 rc.cpp:354 rc.cpp:393
+#, no-c-format
+msgid "Select the sound sink to be used for GStreamer output."
+msgstr "選擇 GStreamer 輸出所使用的接收器。"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 1502
+#: rc.cpp:360
+#, no-c-format
+msgid "Select the sound sink to be used for aKode output."
+msgstr "選擇 aKode 輸出所使用的接收器。"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 1521
+#: rc.cpp:363
+#, no-c-format
+msgid ""
+"Select the sink to be used for aKode output.  Select \"auto\" to let aKode pick "
+"the best output method."
+msgstr "選擇 aKode 輸出所使用的接收器（Sink）。選擇「自動」讓 aKode 自己選擇最好的輸出方法。"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 1534
+#: rc.cpp:366
+#, no-c-format
+msgid "GStrea&mer"
+msgstr "GStreamer(&M)"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 1540
+#: rc.cpp:369
+#, no-c-format
+msgid ""
+"<p>Check to use the GStreamer audio output system.  You must also select a <b>"
+"Sink</b> plugin.</p>"
+msgstr "<p>勾選以使用 GStreamer 音效輸出系統。您必須選擇一個<b>接收器</b>外掛程式。</p>"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 1548
+#: rc.cpp:372
+#, no-c-format
+msgid "a&Rts"
+msgstr "aRts(&R)"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 1557
+#: rc.cpp:375
+#, no-c-format
+msgid "Check to use the KDE aRts system for audio output."
+msgstr "勾選以使用 KDE aRts 系統做為音效輸出。"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 1568
+#: rc.cpp:378
+#, no-c-format
+msgid "aKode"
+msgstr "aKode"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 1580
+#: rc.cpp:381
+#, no-c-format
+msgid ""
+"<p>Check to use aKode for audio output.  You must also select a <b>Sink</b>.</p>"
+msgstr "<p>勾選以使用 aKode 做為音效輸出。您必須同時指定一個<b>接收器</b>（Sink）。</p>"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 1599
+#: rc.cpp:384
+#, no-c-format
+msgid "ALSA"
+msgstr "ALSA"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 1611
+#: rc.cpp:387
+#, no-c-format
+msgid "Check to use Advanced Linux Sound Architecture (ALSA) for audio output."
+msgstr "勾選以使用 ALSA 做為音效輸出。"
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 1630
+#: rc.cpp:390
+#, no-c-format
+msgid "Device:"
+msgstr "裝置："
+
+#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 1652
+#: rc.cpp:396
+#, no-c-format
+msgid ""
+"Select the PCM device to be used for ALSA output.  Select \"default\" to use "
+"the default ALSA device."
+msgstr "選擇 ALSA 輸出所使用的 PCM 裝置。「預設」則是使用預設的 ALSA 裝置。"
+
+#. i18n: file kcmkttsmgr/selecteventwidget.ui line 24
+#: rc.cpp:399
+#, no-c-format
+msgid "Event source:"
+msgstr "事件來源："
+
+#. i18n: file kcmkttsmgr/selecteventwidget.ui line 38
+#: rc.cpp:402
+#, no-c-format
+msgid "Events"
+msgstr "事件"
+
+#. i18n: file libkttsd/selecttalkerwidget.ui line 25
+#: filters/talkerchooser/talkerchooserconf.cpp:225
+#: kcmkttsmgr/kcmkttsmgr.cpp:2501 kttsjobmgr/kttsjobmgr.cpp:496
+#: libkttsd/selecttalkerdlg.h:60 rc.cpp:405
+#, no-c-format
+msgid "Select Talker"
+msgstr "選擇發音員"
+
+#. i18n: file libkttsd/selecttalkerwidget.ui line 61
+#: rc.cpp:408
+#, no-c-format
+msgid "&Use default Talker"
+msgstr "使用預設發音員(&U)"
+
+#. i18n: file libkttsd/selecttalkerwidget.ui line 64
+#: rc.cpp:411
+#, no-c-format
+msgid ""
+"When checked, will use the default Talker, which is the topmost Talker listed "
+"in the Talkers tab."
+msgstr "勾選此選項的話，會使用發音員清單上最頂端的預設的發音員。"
+
+#. i18n: file libkttsd/selecttalkerwidget.ui line 72
+#: rc.cpp:414
+#, no-c-format
+msgid "Use closest &matching Talker having"
+msgstr "使用最接近以下屬性的發音員(&M)："
+
+#. i18n: file libkttsd/selecttalkerwidget.ui line 75
+#: rc.cpp:417
+#, no-c-format
+msgid ""
+"When checked, will use a configured Talker most closely matching the attributes "
+"you choose.  Attributes with checks next to them will be preferred over "
+"unchecked attributes.  Language is always preferred."
+msgstr "勾選此選項的話，會比較發音員的設定，並選擇最接近所指定屬性的發音員。會優先比對所勾選的屬性，但是語言是一定會被比對的。"
+
+#. i18n: file libkttsd/selecttalkerwidget.ui line 125
+#: rc.cpp:420
+#, no-c-format
+msgid "Checked items are preferred over unchecked items."
+msgstr "勾選的屬性會優先比對。"
+
+#. i18n: file libkttsd/selecttalkerwidget.ui line 192
+#: rc.cpp:426
+#, no-c-format
+msgid "&Gender:"
+msgstr "性別(&G)："
+
+#. i18n: file libkttsd/selecttalkerwidget.ui line 257
+#: rc.cpp:429 rc.cpp:985
+#, no-c-format
+msgid "&Volume:"
+msgstr "音量(&V)："
+
+#. i18n: file libkttsd/selecttalkerwidget.ui line 305
+#: rc.cpp:432
+#, no-c-format
+msgid "&Rate:"
+msgstr "頻率(&R)："
+
+#. i18n: file libkttsd/selecttalkerwidget.ui line 374
+#: rc.cpp:438 rc.cpp:702 rc.cpp:711
+#, no-c-format
+msgid ""
+"This filter is applied to text jobs of the specified language.  You may select "
+"more than one language by clicking the browse button and Ctrl-clicking on more "
+"than one in the list.  If blank, the filter applies to all text jobs of any "
+"language."
+msgstr "這個過濾器會套用到指定語言的文字發音工作上。您可以按下 Ctrl 鍵並點選一個以上的語言。如果留白的話，則會套用到任何語言的文字發音工作上。"
+
+#. i18n: file libkttsd/selecttalkerwidget.ui line 385
+#: rc.cpp:444 rc.cpp:534 rc.cpp:615 rc.cpp:717
+#, no-c-format
+msgid ""
+"Click to select one or more languages.  This filter will be applied to text "
+"jobs of those languages."
+msgstr "點選以選擇語言。這個過濾器會套用在這些語言的文字發音工作上。"
+
+#. i18n: file libkttsd/selecttalkerwidget.ui line 421
+#: rc.cpp:447
+#, no-c-format
+msgid "Use specific &Talker"
+msgstr "使用指定的發音員(&T)"
+
+#. i18n: file libkttsd/selecttalkerwidget.ui line 424
+#: rc.cpp:450
+#, no-c-format
+msgid ""
+"When checked, will use the specific Talker (if it is still configured), "
+"otherwise the Talker most closely matching."
+msgstr "勾選此選項的話，會使用指定的發音員，否則會尋找最接近的發音員。"
+
+#. i18n: file filters/sbd/sbdconfwidget.ui line 33
+#: rc.cpp:474
+#, no-c-format
+msgid ""
+"<b>WARNING: This filter is a key component of the KTTS system. Please read the "
+"KTTS Handbook before modifying these settings.</b>"
+msgstr "<b>警告：這個過濾器是 KTTS 系統的主要成員。要變更這些設定之前，請先參考 KTTS 手冊。</b>"
+
+#. i18n: file filters/sbd/sbdconfwidget.ui line 49
+#: rc.cpp:477 rc.cpp:582 rc.cpp:684 rc.cpp:771
+#, no-c-format
+msgid "&Name:"
+msgstr "名稱(&N)："
+
+#. i18n: file filters/sbd/sbdconfwidget.ui line 58
+#: rc.cpp:480 rc.cpp:486
+#, no-c-format
+msgid "The name of this filter.  Enter any descriptive name you like."
+msgstr "過濾器名稱。"
+
+#. i18n: file filters/sbd/sbdconfwidget.ui line 67
+#: filters/sbd/sbdconf.cpp:171 kttsd/filtermgr.cpp:83 rc.cpp:483
+#, no-c-format
+msgid "Standard Sentence Boundary Detector"
+msgstr "標準句子邊界偵測器"
+
+#. i18n: file filters/sbd/sbdconfwidget.ui line 88
+#: rc.cpp:489
+#, no-c-format
+msgid "&Sentence boundary regular expression:"
+msgstr "句子邊界的正規表示式(&S)："
+
+#. i18n: file filters/sbd/sbdconfwidget.ui line 97
+#: rc.cpp:492 rc.cpp:495
+#, no-c-format
+msgid ""
+"The regular expression that detects boundaries between sentences in text jobs."
+msgstr "用於偵測句子邊界的正規表示式。"
+
+#. i18n: file filters/sbd/sbdconfwidget.ui line 132
+#: rc.cpp:501
+#, no-c-format
+msgid "&Replacement sentence boundary:"
+msgstr "句子邊界取代字串(&R)："
+
+#. i18n: file filters/sbd/sbdconfwidget.ui line 141
+#: rc.cpp:504 rc.cpp:507
+#, no-c-format
+msgid ""
+"This string replaces the matched regular expression.  <b>Important</b>"
+": must end with tab (\\t)."
+msgstr "這個字串會取代正規表示式比對到的項目。<b>重要：</b>必須以 tab（\\t）結束。"
+
+#. i18n: file filters/sbd/sbdconfwidget.ui line 160
+#: rc.cpp:510 rc.cpp:591 rc.cpp:789
+#, no-c-format
+msgid "Apply This &Filter When"
+msgstr "套用此過濾器的時機(&F)"
+
+#. i18n: file filters/sbd/sbdconfwidget.ui line 163
+#: rc.cpp:513 rc.cpp:594 rc.cpp:696 rc.cpp:792
+#, no-c-format
+msgid "These settings determines when the filter is applied to text."
+msgstr "這些設定決定何時套用過濾器。"
+
+#. i18n: file filters/sbd/sbdconfwidget.ui line 182
+#: rc.cpp:516
+#, no-c-format
+msgid "&Language is:"
+msgstr "語言為(&L)："
+
+#. i18n: file filters/sbd/sbdconfwidget.ui line 191
+#: rc.cpp:519 rc.cpp:528 rc.cpp:600 rc.cpp:609
+#, no-c-format
+msgid ""
+"This filter is applied to text jobs of the specified language.  You may select "
+"more than one language by clicking the browse button and Ctrl-clicking on more "
+"than one in the list.  If blank the filter applies to all text jobs of any "
+"language."
+msgstr "此過濾器套用在所指定的語言上。您可以按下 Ctrl 鍵並點選一個以上的語言。如果留白的話，則會套用到任何語言的文字發音工作上。"
+
+#. i18n: file filters/sbd/sbdconfwidget.ui line 200
+#: rc.cpp:522 rc.cpp:603 rc.cpp:705
+#, no-c-format
+msgid "Application &ID contains:"
+msgstr "應用程式代碼中內含(&I)："
+
+#. i18n: file filters/sbd/sbdconfwidget.ui line 209
+#: rc.cpp:525 rc.cpp:606 rc.cpp:708
+#, no-c-format
+msgid ""
+"Enter a DCOP Application ID.  This filter will only apply to text jobs queued "
+"by that application.  You may enter more than one ID separated by commas.  If "
+"blank, this filter applies to text jobs queued by all applications.  Tip: Use "
+"kdcop from the command line to get the Application IDs of running applications. "
+" Example: \"konversation, kvirc,ksirc,kopete\""
+msgstr ""
+"輸入一個 DCOP "
+"應用程式代碼。這個過濾器會只套用到該程式送出的文字發音要求。您也可以輸入一個以上的代碼，用逗號隔開。如果留白的話，預設套用到所有的應用程式。提示：在命令列上用 "
+"kdcop 可以知道應用程式的代碼。範例如下：\"konversaion,kvirc,ksirc,kopete\""
+
+#. i18n: file filters/sbd/sbdconfwidget.ui line 259
+#: rc.cpp:537 rc.cpp:618 rc.cpp:720
+#, no-c-format
+msgid ""
+"<qt>Enter a DCOP Application ID.  This filter will only apply to text jobs "
+"queued by that application.  You may enter more than one ID separated by "
+"commas.  Use <b>knotify</b> to match all messages sent as KDE notifications.  "
+"If blank, this filter applies to text jobs queued by all applications.  Tip: "
+"Use kdcop from the command line to get the Application IDs of running "
+"applications.  Example: \"konversation, kvirc,ksirc,kopete\"</qt>"
+msgstr ""
+"<qt>輸入一個 DCOP 應用程式代碼。這個過濾器會只套用到該程式送出的文字發音要求。您也可以輸入一個以上的代碼，用逗號隔開。使用 <b>"
+"knotify</b> 則會套用在所有 KDE 通知上。如果留白的話，預設套用到所有的應用程式。提示：在命令列上用 kdcop "
+"可以知道應用程式的代碼。範例如下：\"konversaion,kvirc,ksirc,kopete\"</qt>"
+
+#. i18n: file filters/sbd/sbdconfwidget.ui line 287
+#: rc.cpp:540 rc.cpp:621
+#, no-c-format
+msgid "Load..."
+msgstr "載入..."
+
+#. i18n: file filters/sbd/sbdconfwidget.ui line 293
+#: rc.cpp:543
+#, no-c-format
+msgid "Click to load a Sentence Boundary Detection configuration from a file."
+msgstr "點選以從檔案載入句子邊界偵測的設定。"
+
+#. i18n: file filters/sbd/sbdconfwidget.ui line 310
+#: rc.cpp:546
+#, no-c-format
+msgid "Sa&ve..."
+msgstr "儲存(&V)..."
+
+#. i18n: file filters/sbd/sbdconfwidget.ui line 313
+#: rc.cpp:549
+#, no-c-format
+msgid "Click to save this Sentence Boundary Detection configuration to a file."
+msgstr "點選以將句子邊界偵測的設定儲存到檔案中。"
+
+#. i18n: file filters/sbd/sbdconfwidget.ui line 330
+#: rc.cpp:552
+#, no-c-format
+msgid "Clea&r"
+msgstr "清除(&R)"
+
+#. i18n: file filters/sbd/sbdconfwidget.ui line 333
+#: rc.cpp:555 rc.cpp:753
+#, no-c-format
+msgid "Click to clear everything."
+msgstr "點選則全部清除。"
+
+#. i18n: file filters/stringreplacer/editreplacementwidget.ui line 55
+#: rc.cpp:558
+#, no-c-format
+msgid "&Type"
+msgstr "類型 (&T)"
+
+#. i18n: file filters/stringreplacer/editreplacementwidget.ui line 85
+#: rc.cpp:561
+#, no-c-format
+msgid "&Word"
+msgstr "單字(&W)"
+
+#. i18n: file filters/stringreplacer/editreplacementwidget.ui line 104
+#: rc.cpp:564
+#, no-c-format
+msgid "Regular &expression"
+msgstr "正規表示式(&E)"
+
+#. i18n: file filters/stringreplacer/editreplacementwidget.ui line 124
+#: rc.cpp:567
+#, no-c-format
+msgid "Match &case"
+msgstr "符合大小寫(&C)"
+
+#. i18n: file filters/stringreplacer/editreplacementwidget.ui line 158
+#: rc.cpp:570
+#, no-c-format
+msgid "&Replace with:"
+msgstr "取代為(&R)："
+
+#. i18n: file filters/stringreplacer/editreplacementwidget.ui line 180
+#: rc.cpp:573
+#, no-c-format
+msgid "&Match:"
+msgstr "符合(&M)："
+
+#. i18n: file filters/stringreplacer/stringreplacerconfwidget.ui line 18
+#: rc.cpp:579
+#, no-c-format
+msgid "Configure String Replacer"
+msgstr "設定取代字串"
+
+#. i18n: file filters/stringreplacer/stringreplacerconfwidget.ui line 46
+#: rc.cpp:585 rc.cpp:588 rc.cpp:687 rc.cpp:690
+#, no-c-format
+msgid "Enter any name you like for this filter."
+msgstr "請輸入此過濾器的名稱。"
+
+#. i18n: file filters/stringreplacer/stringreplacerconfwidget.ui line 87
+#: rc.cpp:597
+#, no-c-format
+msgid "Lan&guage is:"
+msgstr "語言為(&G)："
+
+#. i18n: file filters/stringreplacer/stringreplacerconfwidget.ui line 198
+#: rc.cpp:624
+#, no-c-format
+msgid "Click to load a word list from a file."
+msgstr "點選以從檔案載入單字清單。"
+
+#. i18n: file filters/stringreplacer/stringreplacerconfwidget.ui line 218
+#: rc.cpp:630
+#, no-c-format
+msgid "Click to save word list to a file."
+msgstr "點選以將單字清單儲存到檔案。"
+
+#. i18n: file filters/stringreplacer/stringreplacerconfwidget.ui line 235
+#: rc.cpp:633
+#, no-c-format
+msgid "C&lear"
+msgstr "清除(&L)"
+
+#. i18n: file filters/stringreplacer/stringreplacerconfwidget.ui line 238
+#: rc.cpp:636
+#, no-c-format
+msgid "Click to empty the word list."
+msgstr "點選以清空單字清單。"
+
+#. i18n: file filters/stringreplacer/stringreplacerconfwidget.ui line 255
+#: rc.cpp:639
+#, no-c-format
+msgid "Type"
+msgstr "類型"
+
+#. i18n: file filters/stringreplacer/stringreplacerconfwidget.ui line 266
+#: rc.cpp:642
+#, no-c-format
+msgid "Match Case"
+msgstr "符合大小寫"
+
+#. i18n: file filters/stringreplacer/stringreplacerconfwidget.ui line 277
+#: rc.cpp:645
+#, no-c-format
+msgid "Match"
+msgstr "符合"
+
+#. i18n: file filters/stringreplacer/stringreplacerconfwidget.ui line 288
+#: rc.cpp:648
+#, no-c-format
+msgid "Replace With"
+msgstr "取代為"
+
+#. i18n: file filters/stringreplacer/stringreplacerconfwidget.ui line 325
+#: kcmkttsmgr/kcmkttsmgr.cpp:171 rc.cpp:651
+#, no-c-format
+msgid "&Add..."
+msgstr "新增(&A)..."
+
+#. i18n: file filters/stringreplacer/stringreplacerconfwidget.ui line 328
+#: rc.cpp:654
+#, no-c-format
+msgid "Click to add another word or regular expression to the list."
+msgstr "點選以新增單字或正規表示式。"
+
+#. i18n: file filters/stringreplacer/stringreplacerconfwidget.ui line 345
+#: rc.cpp:657
+#, no-c-format
+msgid "&Up"
+msgstr "向上(&U)"
+
+#. i18n: file filters/stringreplacer/stringreplacerconfwidget.ui line 348
+#: rc.cpp:660
+#, no-c-format
+msgid ""
+"Click to move selected word up in the list.  Words higher in the list are "
+"applied first."
+msgstr "點選以將所選取的單字往上移。越高的單字就會越先被套用。"
+
+#. i18n: file filters/stringreplacer/stringreplacerconfwidget.ui line 367
+#: rc.cpp:666
+#, no-c-format
+msgid ""
+"Click to move a word down in the list.  Words lower in the list are applied "
+"last."
+msgstr "點選以將所選取的單字往下移。越低的單字就會越晚被套用。"
+
+#. i18n: file filters/stringreplacer/stringreplacerconfwidget.ui line 392
+#: rc.cpp:672
+#, no-c-format
+msgid "Click to modify an existing word or regular expression in the list."
+msgstr "點選以變更目前的單字或正規表示式。"
+
+#. i18n: file filters/stringreplacer/stringreplacerconfwidget.ui line 417
+#: rc.cpp:678
+#, no-c-format
+msgid "Click to remove a word or regular expression from the list."
+msgstr "點選以移除目前的單字或正規表示式。"
+
+#. i18n: file filters/talkerchooser/talkerchooserconfwidget.ui line 18
+#: rc.cpp:681
+#, no-c-format
+msgid "Configure Talker Chooser"
+msgstr "設定發音員選擇器"
+
+#. i18n: file filters/talkerchooser/talkerchooserconfwidget.ui line 65
+#: rc.cpp:693
+#, no-c-format
+msgid "&Apply This Filter When"
+msgstr "套用過濾器的時機(&A)"
+
+#. i18n: file filters/talkerchooser/talkerchooserconfwidget.ui line 87
+#: rc.cpp:699
+#, no-c-format
+msgid "Te&xt contains:"
+msgstr "文字內含(&X)："
+
+#. i18n: file filters/talkerchooser/talkerchooserconfwidget.ui line 189
+#: rc.cpp:723
+#, no-c-format
+msgid "&Talker:"
+msgstr "發音員(&T)："
+
+#. i18n: file filters/talkerchooser/talkerchooserconfwidget.ui line 195
+#: rc.cpp:726 rc.cpp:729
+#, no-c-format
+msgid ""
+"The new Talker that will be used when the conditions above are met.  The "
+"default Talker is the topmost in the Talkers tab.  Click the button to choose a "
+"Talker."
+msgstr "新的發音員會在上列的狀況下使用。預設的發音員為發音員清單中最頂端的那一個。點選此鍵以選擇發音員。"
+
+#. i18n: file filters/talkerchooser/talkerchooserconfwidget.ui line 224
+#: rc.cpp:735
+#, no-c-format
+msgid "Click to select a Talker."
+msgstr "點選以選擇發音員。"
+
+#. i18n: file filters/talkerchooser/talkerchooserconfwidget.ui line 253
+#: rc.cpp:741
+#, no-c-format
+msgid "Click to load a Talker Chooser configuration from a file."
+msgstr "點選以從檔案載入發音員選擇器設定。"
+
+#. i18n: file filters/talkerchooser/talkerchooserconfwidget.ui line 273
+#: rc.cpp:747
+#, no-c-format
+msgid "Click to save this Talker Chooser to a file."
+msgstr "點選以將發音員選擇器設定儲存到檔案。"
+
+#. i18n: file filters/xmltransformer/xmltransformerconfwidget.ui line 17
+#: rc.cpp:756
+#, no-c-format
+msgid "Configure XML Transformer"
+msgstr "設定 XML 轉換器"
+
+#. i18n: file filters/xmltransformer/xmltransformerconfwidget.ui line 36
+#: rc.cpp:759 rc.cpp:774
+#, no-c-format
+msgid "Enter any descriptive name you like for this filter."
+msgstr "請輸入此過濾器的名稱。"
+
+#. i18n: file filters/xmltransformer/xmltransformerconfwidget.ui line 44
+#: rc.cpp:762 rc.cpp:780
+#, no-c-format
+msgid ""
+"Enter the full path to an XML Style Language - Transforms (XSLT) stylesheet "
+"file.  XSLT files usually end with extension .xsl."
+msgstr "輸入 XML 風格語言轉換器（XSLT）檔案的完整路徑。XSLT 檔通常副檔名為 .xsl。"
+
+#. i18n: file filters/xmltransformer/xmltransformerconfwidget.ui line 52
+#: rc.cpp:765
+#, no-c-format
+msgid "xsltproc"
+msgstr "xsltproc"
+
+#. i18n: file filters/xmltransformer/xmltransformerconfwidget.ui line 55
+#: rc.cpp:768 rc.cpp:786
+#, no-c-format
+msgid ""
+"Enter the path to the xsltproc executable program.  If it is in the PATH "
+"environment variable, just enter \"xsltproc\"."
+msgstr "輸入 xsltproc 執行檔的完整路徑。如果它已經在您設定的執行路徑中，只要輸入 xsltproc 即可。"
+
+#. i18n: file filters/xmltransformer/xmltransformerconfwidget.ui line 91
+#: rc.cpp:777
+#, no-c-format
+msgid "&XSLT file:"
+msgstr "XSLT 檔(&X)："
+
+#. i18n: file filters/xmltransformer/xmltransformerconfwidget.ui line 108
+#: rc.cpp:783
+#, no-c-format
+msgid "xsltproc &executable:"
+msgstr "xsltproc 路徑(&E)："
+
+#. i18n: file filters/xmltransformer/xmltransformerconfwidget.ui line 149
+#: rc.cpp:795 rc.cpp:807
+#, no-c-format
+msgid ""
+"This filter will be applied only to text having the specified XML root element. "
+" If blank, applies to all text.  You may enter more than one root element "
+"separated by commas.  Example: \"html\"."
+msgstr ""
+"這個過濾器只會套用到含有指定的 XML 根元素的文字。如果留白的話，則會套用到所有的文字。您可以輸入一個以上的根元素，用逗號隔開。範例如下：\"html\"。"
+
+#. i18n: file filters/xmltransformer/xmltransformerconfwidget.ui line 157
+#: rc.cpp:798 rc.cpp:813
+#, no-c-format
+msgid ""
+"This filter will be applied only to text having the specified DOCTYPE "
+"specification.  If blank, applies to all text.  You may enter more than one "
+"DOCTYPE separated by commas.  Example: \"xhtml\"."
+msgstr ""
+"這個過濾器只會套用到含有指定的 DOCTYPE 的文字。如果留白的話，則會套用到所有的文字。您可以輸入一個以上的 "
+"DOCTYPE，用逗號隔開。範例如下：\"xhtml\"。"
+
+#. i18n: file filters/xmltransformer/xmltransformerconfwidget.ui line 165
+#: rc.cpp:801 rc.cpp:819
+#, no-c-format
+msgid ""
+"<qt>Enter a DCOP Application ID.  This filter will only apply to text queued by "
+"that application.  You may enter more than one ID separated by commas.  Use <b>"
+"knotify</b> to match all messages sent as KDE notifications.  If blank, this "
+"filter applies to text queued by all applications.  Tip: Use kdcop from the "
+"command line to get the Application IDs of running applications.  Example: "
+"\"konversation, kvirc,ksirc,kopete\"</qt>"
+msgstr ""
+"<qt>輸入一個 DCOP 應用程式代碼。這個過濾器會只套用到該程式送出的文字發音要求。您也可以輸入一個以上的代碼，用逗號隔開。使用 <b>"
+"knotify</b> 則會套用在所有 KDE 通知上。如果留白的話，預設套用到所有的應用程式。提示：在命令列上用 kdcop "
+"可以知道應用程式的代碼。範例如下：\"konversaion,kvirc,ksirc,kopete\"</qt>"
+
+#. i18n: file filters/xmltransformer/xmltransformerconfwidget.ui line 183
+#: rc.cpp:804
+#, no-c-format
+msgid "&Root element is:"
+msgstr "根元素(&R)："
+
+#. i18n: file filters/xmltransformer/xmltransformerconfwidget.ui line 201
+#: rc.cpp:810
+#, no-c-format
+msgid "or DOC&TYPE is:"
+msgstr "或 DOCTYPE 為(&T)："
+
+#. i18n: file filters/xmltransformer/xmltransformerconfwidget.ui line 218
+#: rc.cpp:816
+#, no-c-format
+msgid "and Application &ID contains:"
+msgstr "且應用程式代碼內含(&I)："
+
+#. i18n: file plugins/command/commandconfwidget.ui line 30
+#: rc.cpp:822
+#, no-c-format
+msgid "Co&mmand Configuration"
+msgstr "命令設定(&M)"
+
+#. i18n: file plugins/command/commandconfwidget.ui line 61
+#: rc.cpp:825
+#, no-c-format
+msgid "Command &for speaking texts:"
+msgstr "文字發音的命令(&F)："
+
+#. i18n: file plugins/command/commandconfwidget.ui line 72
+#: rc.cpp:828
+#, no-c-format
+msgid ""
+"This field specifies both the command used for speaking texts and its "
+"parameters. If you want to pass the text as a parameter, write %t at the place "
+"where the text should be inserted.  To pass a file of the text, write %f.  To "
+"synthesize only and let KTTSD play the synthesized text, write %w for the "
+"generated audio file."
+msgstr ""
+"這個欄位指定文字要發音的命令及參數。如果您要將文字當成參數傳遞，用 %t 來表示您要傳遞的文字。要傳遞文字檔案當成參數，用 %f 來表示。如果只要合成並讓 "
+"KTTSD 來播放，用 %w 來表示產生的音效檔。"
+
+#. i18n: file plugins/command/commandconfwidget.ui line 88
+#: rc.cpp:831
+#, no-c-format
+msgid "&Send the data as standard input"
+msgstr "用標準輸入傳送資料(&S)"
+
+#. i18n: file plugins/command/commandconfwidget.ui line 91
+#: rc.cpp:834
+#, no-c-format
+msgid ""
+"This check box specifies whether the text is sent as standard input (stdin) to "
+"the speech synthesizer."
+msgstr "勾選此選項的話，表示文字經由標準輸入傳遞給語音合成器。"
+
+#. i18n: file plugins/command/commandconfwidget.ui line 116
+#: rc.cpp:837 rc.cpp:946 rc.cpp:1036 rc.cpp:1072 rc.cpp:1186
+#, no-c-format
+msgid "&Test"
+msgstr "測試(&T)"
+
+#. i18n: file plugins/command/commandconfwidget.ui line 142
+#: rc.cpp:840 rc.cpp:865 rc.cpp:1180
+#, no-c-format
+msgid "Character &encoding:"
+msgstr "字元編碼(&E)："
+
+#. i18n: file plugins/command/commandconfwidget.ui line 161
+#: rc.cpp:843 rc.cpp:1045
+#, no-c-format
+msgid ""
+"This combo box specifies which character encoding is used for passing the text."
+msgstr "這個選單指定所傳遞的文字的編碼。"
+
+#. i18n: file plugins/command/commandconfwidget.ui line 175
+#: rc.cpp:846
+#, no-c-format
+msgid ""
+"Parameters:\n"
+"  %t: Text to be spoken\n"
+"  %f: Filename of a temporary file containing the text\n"
+"  %l: Language (two letter code)\n"
+"  %w: Filename of a temporary file for generated audio"
+msgstr ""
+"參數：\n"
+" %t：要發音的文字\n"
+" %f：包含文字的暫存檔名\n"
+" '%l：語言（兩個字母的代碼）\n"
+" %w：產生的音效的暫存輸出檔名"
+
+#. i18n: file plugins/epos/eposconfwidget.ui line 25
+#: rc.cpp:853
+#, no-c-format
+msgid "Epos Config UI"
+msgstr "Epos 設定介面"
+
+#. i18n: file plugins/epos/eposconfwidget.ui line 28
+#: rc.cpp:856 rc.cpp:862
+#, no-c-format
+msgid ""
+"This is the configuration dialog for the Epos Czech and Slovak speech "
+"synthesizer."
+msgstr "這個對話框設定 Epos 捷克與斯洛伐克語的語音合成器。"
+
+#. i18n: file plugins/epos/eposconfwidget.ui line 53
+#: rc.cpp:859
+#, no-c-format
+msgid "E&pos Configuration"
+msgstr "Epos 組態設定(&P)"
+
+#. i18n: file plugins/epos/eposconfwidget.ui line 108
+#: rc.cpp:868
+#, no-c-format
+msgid "Specifies which character encoding is used for passing the text."
+msgstr "指定所傳遞的文字的編碼。"
+
+#. i18n: file plugins/epos/eposconfwidget.ui line 142
+#: rc.cpp:871 rc.cpp:1129
+#, no-c-format
+msgid "Speed:"
+msgstr "速度："
+
+#. i18n: file plugins/epos/eposconfwidget.ui line 148
+#: rc.cpp:874 rc.cpp:886 rc.cpp:895
+#, no-c-format
+msgid ""
+"Sets the speed of speech.  Slide the slider to the left to slow speech down; to "
+"the right to increase talking speed.  Anything less than 75 percent is "
+"considered \"slow\", and anything greater than 125 percent is considered "
+"\"fast\"."
+msgstr "設定發音速度。滑動器左側表示慢速，右側表示快速。通常小於 75% 算是慢的，大於 125% 則算是快的。"
+
+#. i18n: file plugins/epos/eposconfwidget.ui line 164
+#: rc.cpp:877
+#, no-c-format
+msgid "Pitch:"
+msgstr "音準："
+
+#. i18n: file plugins/epos/eposconfwidget.ui line 170
+#: rc.cpp:880 rc.cpp:892 rc.cpp:898
+#, no-c-format
+msgid ""
+"Sets the tone (frequency) of speech.  Slide the slider to the left to lower the "
+"voice tone; to the right to increase tone.  Anything less than 75 percent is "
+"considered \"low\", and anything greater than 125 percent is considered "
+"\"high\"."
+msgstr "設定語音的音調。滑動器左側表示音調低，右側表示音調高。小於 75% 則算是低的，大於 125% 則算是高的。"
+
+#. i18n: file plugins/epos/eposconfwidget.ui line 346
+#: rc.cpp:901
+#, no-c-format
+msgid "Epos server executable path:"
+msgstr "Epos 伺服器執行路徑："
+
+#. i18n: file plugins/epos/eposconfwidget.ui line 355
+#: rc.cpp:904 rc.cpp:916
+#, no-c-format
+msgid ""
+"If the Epos server program will be found due to your PATH environment variable, "
+"simply enter \"epos\", otherwise enter the full path to the Epos server "
+"executable program."
+msgstr "如果 Epos 已經在您設定的執行路徑中，則輸入 epos 即可，否則請輸入 Epos 伺服器的完整路徑。"
+
+#. i18n: file plugins/epos/eposconfwidget.ui line 371
+#: rc.cpp:907
+#, no-c-format
+msgid "Epos client executable path:"
+msgstr "Epos 客戶端執行路徑："
+
+#. i18n: file plugins/epos/eposconfwidget.ui line 380
+#: rc.cpp:910 rc.cpp:922
+#, no-c-format
+msgid ""
+"If the Epos client program will be found due to the PATH environment variable, "
+"simply enter \"say\" here.  Otherwise, specify the full path to the Epos client "
+"program."
+msgstr "如果 Epos 客戶端程式已經在您設定的執行路徑中，則輸入 say 即可，否則請輸入 Epos 客戶端的完整路徑。"
+
+#. i18n: file plugins/epos/eposconfwidget.ui line 406
+#: rc.cpp:913
+#, no-c-format
+msgid "epos"
+msgstr "epos"
+
+#. i18n: file plugins/epos/eposconfwidget.ui line 425
+#: rc.cpp:919
+#, no-c-format
+msgid "say"
+msgstr "say"
+
+#. i18n: file plugins/epos/eposconfwidget.ui line 440
+#: rc.cpp:925
+#, no-c-format
+msgid "Additional Options (advanced)"
+msgstr "額外選項（進階）"
+
+#. i18n: file plugins/epos/eposconfwidget.ui line 467
+#: rc.cpp:928 rc.cpp:937
+#, no-c-format
+msgid ""
+"Optional.  Enter any server command line options here.  To see available "
+"options, enter \"epos -h\" in a terminal.  Do not use \"-o\"."
+msgstr "在此輸入伺服器命令的選項。在命令列中使用 epos -h 可以看到可使用的選項清單。不要用 -o。"
+
+#. i18n: file plugins/epos/eposconfwidget.ui line 475
+#: rc.cpp:931
+#, no-c-format
+msgid ""
+"Specify options to be passed to Epos client.  To see available options, enter "
+"\"say -h\" in a terminal.  Do not use \"-o\"."
+msgstr "在此指定要傳遞給 Epos 客戶端的選項。在命令列中使用 say -h 可以看到可使用的選項清單。不要使用 -o。"
+
+#. i18n: file plugins/epos/eposconfwidget.ui line 501
+#: rc.cpp:934
+#, no-c-format
+msgid "Epos server:"
+msgstr "Epos 伺服器："
+
+#. i18n: file plugins/epos/eposconfwidget.ui line 526
+#: rc.cpp:940
+#, no-c-format
+msgid "Epos client:"
+msgstr "Epos 客戶端："
+
+#. i18n: file plugins/epos/eposconfwidget.ui line 535
+#: rc.cpp:943
+#, no-c-format
+msgid ""
+"Specify options to be passed to Epos client.  Do not use -o.  To see available "
+"options, enter \"say -h\" in a terminal.  Do not use \"-o\"."
+msgstr "在此指定要傳遞給 Epos 客戶端的選項。在命令列中使用 say -h 可以看到可使用的選項清單。不要使用 -o。"
+
+#. i18n: file plugins/epos/eposconfwidget.ui line 577
+#: rc.cpp:949
+#, no-c-format
+msgid ""
+"Click to test the configuration.  If correct, you will hear a sentence spoken."
+msgstr "點選以測試設定。設定正確的話，您就可以聽到一個句子。"
+
+#. i18n: file plugins/festivalint/festivalintconfwidget.ui line 25
+#: rc.cpp:952
+#, no-c-format
+msgid "Festival Config UI"
+msgstr "Festival 設定介面"
+
+#. i18n: file plugins/festivalint/festivalintconfwidget.ui line 28
+#: rc.cpp:955 rc.cpp:961
+#, no-c-format
+msgid ""
+"This is the dialog for configuring the Festival speech synthesizer in "
+"interactive mode."
+msgstr "這個對話框用於設定 Festival 語音合成器互動模式。"
+
+#. i18n: file plugins/festivalint/festivalintconfwidget.ui line 53
+#: rc.cpp:958
+#, no-c-format
+msgid "Festival &Interactive Configuration"
+msgstr "Festival 互動設定(&I)"
+
+#. i18n: file plugins/festivalint/festivalintconfwidget.ui line 95
+#: rc.cpp:964
+#, no-c-format
+msgid "&Festival executable:"
+msgstr "Festival 執行路徑(&F)："
+
+#. i18n: file plugins/festivalint/festivalintconfwidget.ui line 104
+#: rc.cpp:967 rc.cpp:970
+#, no-c-format
+msgid ""
+"If Festival is in your PATH environment variable, just enter \"festival\", "
+"otherwise specify the full path to the Festival executable program."
+msgstr "如果 Festival 已經在您設定的執行路徑中，則輸入 festival 即可，否則請輸入 Festival 執行檔的完整路徑。"
+
+#. i18n: file plugins/festivalint/festivalintconfwidget.ui line 144
+#: rc.cpp:973
+#, no-c-format
+msgid "&Select voice:"
+msgstr "選擇聲音(&S)："
+
+#. i18n: file plugins/festivalint/festivalintconfwidget.ui line 153
+#: rc.cpp:976 rc.cpp:979
+#, no-c-format
+msgid ""
+"Select a voice to speak text with.  MultiSyn voices are high quality but are "
+"slow to load.  If no voices are shown, check the Festival executable path.  You "
+"must install at least one Festival voice.  If you have installed a voice and "
+"still none are shown, check your Festival configuration.  (See the README that "
+"comes with Festival.)"
+msgstr ""
+"選擇要發音的聲音。MultiSyn 品質很高，但是載入很慢。如果沒有顯示聲音，請檢查 Festival 執行路徑是否正確。您必須至少安裝一個 Festival "
+"聲音。如果您已經安裝 Festival 聲音，但是這裡仍然沒有顯示，請檢查您的 Festival 設定（請看 Festival 的 README）。"
+
+#. i18n: file plugins/festivalint/festivalintconfwidget.ui line 177
+#: rc.cpp:982
+#, no-c-format
+msgid "&Rescan"
+msgstr "重新掃描(&R)"
+
+#. i18n: file plugins/festivalint/festivalintconfwidget.ui line 218
+#: rc.cpp:988 rc.cpp:1006 rc.cpp:1021
+#, no-c-format
+msgid ""
+"Sets the volume (loudness) of speech.  Slide the slider to the left to lower "
+"the volume; to the right to increase volume.  Anything less than 75 percent is "
+"considered \"soft\", and anything greater than 125 percent is considered "
+"\"loud\"."
+msgstr "設定發音音量。滑動器左側表示小聲，右側表示大聲。通常 小於 75% 算是小聲，大於 125% 則算是大聲。"
+
+#. i18n: file plugins/festivalint/festivalintconfwidget.ui line 234
+#: rc.cpp:991
+#, no-c-format
+msgid "Sp&eed:"
+msgstr "速度(&E)："
+
+#. i18n: file plugins/festivalint/festivalintconfwidget.ui line 256
+#: rc.cpp:997 rc.cpp:1144
+#, no-c-format
+msgid "&Pitch:"
+msgstr "音準(&P)："
+
+#. i18n: file plugins/festivalint/festivalintconfwidget.ui line 262
+#: rc.cpp:1000 rc.cpp:1018 rc.cpp:1027
+#, no-c-format
+msgid ""
+"Sets the tone (frequency) of speech.  Slide the slider to the left to lower the "
+"voice tone; to the right to increase tone.  Anything less than 75 percent is "
+"considered \"low\", and anything greater than 125 percent is considered "
+"\"high\".  You cannot change the pitch of MultiSyn voices."
+msgstr ""
+"設定語音的音調。滑動器左側表示音調低，右側表示音調高。小於 75% 則算是低的，大於 125% 則算是高的。您無法改變 MultiSyn 的音準。"
+
+#. i18n: file plugins/festivalint/festivalintconfwidget.ui line 485
+#: rc.cpp:1030
+#, no-c-format
+msgid "&Load this voice when starting KTTSD"
+msgstr "啟動 KTTSD 時載入此聲音(&L)"
+
+#. i18n: file plugins/festivalint/festivalintconfwidget.ui line 488
+#: rc.cpp:1033
+#, no-c-format
+msgid ""
+"If checked, Festival will be started and this voice will be loaded when the "
+"Text-to-Speech Deamon (KTTSD) is started.  Check when a voice requires a long "
+"time to load in Festival (for example, multisyn voices), otherwise, leave "
+"unchecked."
+msgstr ""
+"勾選此選項的話，在 KTTSD 啟動時，會同時啟動 Festival 並載入此聲音。如果這個聲音載入到 Festival 的時間較長（如 "
+"MultiSyn），請勾選此選項，否則請不要勾選。"
+
+#. i18n: file plugins/festivalint/festivalintconfwidget.ui line 516
+#: rc.cpp:1039
+#, no-c-format
+msgid ""
+"Click to test the configuration.  Festival will be started and a test sentence "
+"will be spoken."
+msgstr "點選以測試設定。Festival 會啟動，然後您能聽到一個測試句子。"
+
+#. i18n: file plugins/festivalint/festivalintconfwidget.ui line 542
+#: rc.cpp:1042
+#, no-c-format
+msgid "Character e&ncoding:"
+msgstr "字元編碼(&N)："
+
+#. i18n: file plugins/flite/fliteconfwidget.ui line 25
+#: rc.cpp:1048
+#, no-c-format
+msgid "Flite Config UI"
+msgstr "Flite 設定介面"
+
+#. i18n: file plugins/flite/fliteconfwidget.ui line 28
+#: rc.cpp:1051 rc.cpp:1057
+#, no-c-format
+msgid ""
+"This is the configuration dialog for the Festival Lite (Flite) speech synthesis "
+"engine."
+msgstr "這個對話框用於設定 Festival Lite (Flite)語音合成器引擎。"
+
+#. i18n: file plugins/flite/fliteconfwidget.ui line 70
+#: rc.cpp:1054
+#, no-c-format
+msgid "Festival &Lite (flite) Configuration"
+msgstr "Flite 設定(&L)"
+
+#. i18n: file plugins/flite/fliteconfwidget.ui line 112
+#: rc.cpp:1060
+#, no-c-format
+msgid "&Flite executable path:"
+msgstr "Flite 執行路徑(&F)："
+
+#. i18n: file plugins/flite/fliteconfwidget.ui line 121
+#: rc.cpp:1063 rc.cpp:1069
+#, no-c-format
+msgid ""
+"If Flite is in your PATH environment variable, simply enter \"flite\", "
+"otherwise specify the complete path to the Flite executable program."
+msgstr "如果 Flite 已經在您設定的執行路徑中，則輸入 flite 即可，否則請輸入 Flite 執行檔的完整路徑。"
+
+#. i18n: file plugins/flite/fliteconfwidget.ui line 137
+#: rc.cpp:1066
+#, no-c-format
+msgid "flite"
+msgstr "flite"
+
+#. i18n: file plugins/freetts/freettsconfigwidget.ui line 25
+#: rc.cpp:1075
+#, no-c-format
+msgid "FreeTTS Config UI"
+msgstr "FreeTTS 設定介面"
+
+#. i18n: file plugins/freetts/freettsconfigwidget.ui line 67
+#: rc.cpp:1078
+#, no-c-format
+msgid "FreeTTS Interactive Configuration"
+msgstr "FreeTTS 互動設定"
+
+#. i18n: file plugins/freetts/freettsconfigwidget.ui line 106
+#: rc.cpp:1081
+#, no-c-format
+msgid "&FreeTTS jar file:"
+msgstr "FreeTTS jar 檔(&F)："
+
+#. i18n: file plugins/freetts/freettsconfigwidget.ui line 179
+#: rc.cpp:1084
+#, no-c-format
+msgid "Test"
+msgstr "測試"
+
+#. i18n: file plugins/hadifix/hadifixconfigui.ui line 16
+#: rc.cpp:1087
+#, no-c-format
+msgid "Hadifix Configuration"
+msgstr "Hadifix 設定"
+
+#. i18n: file plugins/hadifix/hadifixconfigui.ui line 19
+#: rc.cpp:1090 rc.cpp:1096
+#, no-c-format
+msgid ""
+"This is the configuration dialog for the Hadifix (txt2pho and Mbrola) speech "
+"synthesizer."
+msgstr "這個對話框用於設定 Hadifix (txt2pho 與 Mbrola) 語音合成器。"
+
+#. i18n: file plugins/hadifix/hadifixconfigui.ui line 44
+#: rc.cpp:1093
+#, no-c-format
+msgid "Had&ifix Configuration"
+msgstr "Hadifix 設定(&I)"
+
+#. i18n: file plugins/hadifix/hadifixconfigui.ui line 78
+#: rc.cpp:1099
+#, no-c-format
+msgid "&Basic Options"
+msgstr "基本選項(&B)"
+
+#. i18n: file plugins/hadifix/hadifixconfigui.ui line 97
+#: rc.cpp:1102
+#, no-c-format
+msgid "&Voice file:"
+msgstr "聲音檔(&V)："
+
+#. i18n: file plugins/hadifix/hadifixconfigui.ui line 103
+#: rc.cpp:1105 rc.cpp:1108
+#, no-c-format
+msgid ""
+"Select a voice for speaking text.  If no voices are listed, check your Mbrola "
+"configuration.  You must install at least one voice."
+msgstr "選擇要發音的聲音。如果沒有列出任何聲音，請檢查您的 Mbrola 設定。您必須至少安裝一個聲音。"
+
+#. i18n: file plugins/hadifix/hadifixconfigui.ui line 135
+#: rc.cpp:1111
+#, no-c-format
+msgid "&Select..."
+msgstr "選擇(&S)..."
+
+#. i18n: file plugins/hadifix/hadifixconfigui.ui line 151
+#: rc.cpp:1114
+#, no-c-format
+msgid "Volume &ratio:"
+msgstr "音量比例(&R)："
+
+#. i18n: file plugins/hadifix/hadifixconfigui.ui line 157
+#: rc.cpp:1117 rc.cpp:1123 rc.cpp:1126
+#, no-c-format
+msgid ""
+"Adjusts the volume of speech.  Slide to left for softer speech; to the right "
+"for louder."
+msgstr "調整語音的音量。滑動器左側表示小聲，右側表示大聲。"
+
+#. i18n: file plugins/hadifix/hadifixconfigui.ui line 245
+#: rc.cpp:1132 rc.cpp:1138 rc.cpp:1141
+#, no-c-format
+msgid ""
+"Adjusts the speed of speech.  Slide to left for slower speech; to the right for "
+"faster."
+msgstr "調整語音的速度。滑動器左側表示慢，右側表示快。"
+
+#. i18n: file plugins/hadifix/hadifixconfigui.ui line 327
+#: rc.cpp:1147 rc.cpp:1153 rc.cpp:1156
+#, no-c-format
+msgid ""
+"Adjusts the pitch (tone) of speech.  Slide to left for lower speech; to the "
+"right for higher."
+msgstr "調整語音的音調。滑動器左側表示低，右側表示高。"
+
+#. i18n: file plugins/hadifix/hadifixconfigui.ui line 399
+#: rc.cpp:1159
+#, no-c-format
+msgid "&Advanced Options"
+msgstr "進階選項(&A)"
+
+#. i18n: file plugins/hadifix/hadifixconfigui.ui line 416
+#: rc.cpp:1162
+#, no-c-format
+msgid "txt2pho e&xecutable:"
+msgstr "txt2pho 執行路徑(&X)："
+
+#. i18n: file plugins/hadifix/hadifixconfigui.ui line 422
+#: rc.cpp:1165 rc.cpp:1168
+#, no-c-format
+msgid ""
+"If the txt2pho program is in your PATH environment variable, simply enter "
+"\"txt2pho\", otherwise specify the full path to the txt2pho executable program."
+msgstr "如果 txt2pho 已經在您設定的執行路徑中，則輸入 txt2pho 即可，否則請輸入 txt2pho 執行檔的完整路徑。"
+
+#. i18n: file plugins/hadifix/hadifixconfigui.ui line 446
+#: rc.cpp:1171
+#, no-c-format
+msgid "&Mbrola executable:"
+msgstr "Mbrola 執行路徑(&M)："
+
+#. i18n: file plugins/hadifix/hadifixconfigui.ui line 452
+#: rc.cpp:1174 rc.cpp:1177
+#, no-c-format
+msgid ""
+"If the Mbrola program is in your PATH environment variable, simply enter "
+"\"mbrola\", otherwise specify the full path to the Mbrola executable program."
+msgstr "如果 Mbrola 已經在您設定的執行路徑中，則輸入 mbrola 即可，否則請輸入 Mbrola 執行檔的完整路徑。"
+
+#. i18n: file plugins/hadifix/hadifixconfigui.ui line 511
+#: rc.cpp:1183
+#, no-c-format
+msgid ""
+"This combo box specifies which character encoding is used for passing the text. "
+" For most western languages, use ISO-8859-1.  For Hungarian, use ISO-8859-2."
+msgstr "這個選單指定傳遞的文字的編碼。大部份西方的語言使用 ISO-8859-1，匈牙利語請使用 ISO-8859-2。"
+
+#. i18n: file plugins/hadifix/hadifixconfigui.ui line 551
+#: rc.cpp:1189
+#, no-c-format
+msgid "Click to test the configuration.  You should hear a spoken sentence."
+msgstr "點選以測試設定。您應該能聽到一個句子。"
+
+#. i18n: file plugins/hadifix/voicefileui.ui line 16
+#: rc.cpp:1192
+#, no-c-format
+msgid "Selecting Voice File"
+msgstr "選擇聲音檔"
+
+#. i18n: file plugins/hadifix/voicefileui.ui line 33
+#: rc.cpp:1195
+#, no-c-format
+msgid "Path of the voice file:"
+msgstr "聲音檔路徑："
+
+#. i18n: file plugins/hadifix/voicefileui.ui line 69
+#: rc.cpp:1201
+#, no-c-format
+msgid "Female"
+msgstr "女"
+
+#. i18n: file plugins/hadifix/voicefileui.ui line 77
+#: rc.cpp:1204
+#, no-c-format
+msgid "Male"
+msgstr "男"
+
+#. i18n: file plugins/hadifix/voicefileui.ui line 85
+#: rc.cpp:1207
+#, no-c-format
+msgid "Try to Determine From Voice File"
+msgstr "試著由聲音檔來決定"
+
+#. i18n: file plugins/festivalint/voices line 14
+#: rc.cpp:1210 rc.cpp:1213 rc.cpp:1333 rc.cpp:1339 rc.cpp:1345 rc.cpp:1351
+#: rc.cpp:1360
+#, no-c-format
+msgid ""
+"_: FestivalVoiceName\n"
+"American Male"
+msgstr "美國男性"
+
+#. i18n: file plugins/festivalint/voices line 38
+#: rc.cpp:1216
+#, no-c-format
+msgid ""
+"_: FestivalVoiceName\n"
+"American Female, MBROLA"
+msgstr "美國女性，MBROLA"
+
+#. i18n: file plugins/festivalint/voices line 50
+#: rc.cpp:1219 rc.cpp:1222
+#, no-c-format
+msgid ""
+"_: FestivalVoiceName\n"
+"American Male, MBROLA"
+msgstr "美國男性，MBROLA"
+
+#. i18n: file plugins/festivalint/voices line 74
+#: rc.cpp:1225 rc.cpp:1228 rc.cpp:1363
+#, no-c-format
+msgid ""
+"_: FestivalVoiceName\n"
+"British Male"
+msgstr "英國男性"
+
+#. i18n: file plugins/festivalint/voices line 98
+#: rc.cpp:1231
+#, no-c-format
+msgid ""
+"_: FestivalVoiceName\n"
+"Castilian Spanish Male"
+msgstr "西班牙男性"
+
+#. i18n: file plugins/festivalint/voices line 110
+#: rc.cpp:1234 rc.cpp:1246 rc.cpp:1249
+#, no-c-format
+msgid ""
+"_: FestivalVoiceName\n"
+"American Male, HTS"
+msgstr "美國男性，HTS"
+
+#. i18n: file plugins/festivalint/voices line 122
+#: rc.cpp:1237
+#, no-c-format
+msgid ""
+"_: FestivalVoiceName\n"
+"American Female, HTS"
+msgstr "美國女性，HTS"
+
+#. i18n: file plugins/festivalint/voices line 134
+#: rc.cpp:1240
+#, no-c-format
+msgid ""
+"_: FestivalVoiceName\n"
+"Canadian English Male, HTS"
+msgstr "加拿大男性，HTS"
+
+#. i18n: file plugins/festivalint/voices line 146
+#: rc.cpp:1243
+#, no-c-format
+msgid ""
+"_: FestivalVoiceName\n"
+"Scottish Male, HTS"
+msgstr "蘇格蘭男性，HTS"
+
+#. i18n: file plugins/festivalint/voices line 182
+#: rc.cpp:1252
+#, no-c-format
+msgid ""
+"_: FestivalVoiceName\n"
+"Canadian English Male, MultiSyn"
+msgstr "加拿大男性，MultiSyn"
+
+#. i18n: file plugins/festivalint/voices line 194
+#: rc.cpp:1255
+#, no-c-format
+msgid ""
+"_: FestivalVoiceName\n"
+"Scottish Male, MultiSyn"
+msgstr "蘇格蘭男性，MultiSyn"
+
+#. i18n: file plugins/festivalint/voices line 206
+#: rc.cpp:1258 rc.cpp:1264
+#, no-c-format
+msgid ""
+"_: FestivalVoiceName\n"
+"German Female, Festival"
+msgstr "德國女性，Festival"
+
+#. i18n: file plugins/festivalint/voices line 218
+#: rc.cpp:1261
+#, no-c-format
+msgid ""
+"_: FestivalVoiceName\n"
+"German Male, Festival"
+msgstr "德國男性，Festival"
+
+#. i18n: file plugins/festivalint/voices line 242
+#: rc.cpp:1267
+#, no-c-format
+msgid ""
+"_: FestivalVoiceName\n"
+"Mexican Spanish Male, OGC"
+msgstr "墨西哥男性，OGC"
+
+#. i18n: file plugins/festivalint/voices line 254
+#: rc.cpp:1270
+#, no-c-format
+msgid ""
+"_: FestivalVoiceName\n"
+"Mexican Spanish Female, OGC"
+msgstr "墨西哥女性，OGC"
+
+#. i18n: file plugins/festivalint/voices line 266
+#: rc.cpp:1273 rc.cpp:1276 rc.cpp:1279 rc.cpp:1288
+#, no-c-format
+msgid ""
+"_: FestivalVoiceName\n"
+"American Male, OGC"
+msgstr "美國男性，OGC"
+
+#. i18n: file plugins/festivalint/voices line 302
+#: rc.cpp:1282 rc.cpp:1291
+#, no-c-format
+msgid ""
+"_: FestivalVoiceName\n"
+"American Female, OGC"
+msgstr "美國女性，OGC"
+
+#. i18n: file plugins/festivalint/voices line 314
+#: rc.cpp:1285
+#, no-c-format
+msgid ""
+"_: FestivalVoiceName\n"
+"British Male, OGC"
+msgstr "英國男性，OGC"
+
+#. i18n: file plugins/festivalint/voices line 350
+#: rc.cpp:1294
+#, no-c-format
+msgid ""
+"_: FestivalVoiceName\n"
+"Finnish Male"
+msgstr "芬蘭男性"
+
+#. i18n: file plugins/festivalint/voices line 362
+#: rc.cpp:1297
+#, no-c-format
+msgid ""
+"_: FestivalVoiceName\n"
+"Czech Male, MBROLA"
+msgstr "捷克男性，MBROLA"
+
+#. i18n: file plugins/festivalint/voices line 374
+#: rc.cpp:1300
+#, no-c-format
+msgid ""
+"_: FestivalVoiceName\n"
+"Polish Male"
+msgstr "波蘭男性"
+
+#. i18n: file plugins/festivalint/voices line 386
+#: rc.cpp:1303
+#, no-c-format
+msgid ""
+"_: FestivalVoiceName\n"
+"Russian Male"
+msgstr "俄國男性"
+
+#. i18n: file plugins/festivalint/voices line 398
+#: rc.cpp:1306 rc.cpp:1315 rc.cpp:1318
+#, no-c-format
+msgid ""
+"_: FestivalVoiceName\n"
+"Italian Male"
+msgstr "義大利男性"
+
+#. i18n: file plugins/festivalint/voices line 410
+#: rc.cpp:1309 rc.cpp:1312 rc.cpp:1321
+#, no-c-format
+msgid ""
+"_: FestivalVoiceName\n"
+"Italian Female"
+msgstr "義大利女性"
+
+#. i18n: file plugins/festivalint/voices line 470
+#: rc.cpp:1324
+#, no-c-format
+msgid ""
+"_: FestivalVoiceName\n"
+"Kiswahili Male"
+msgstr "Kiswahili 男性"
+
+#. i18n: file plugins/festivalint/voices line 484
+#: rc.cpp:1327
+#, no-c-format
+msgid ""
+"_: FestivalVoiceName\n"
+"Ibibio Female"
+msgstr "Ibibio 女性"
+
+#. i18n: file plugins/festivalint/voices line 496
+#: rc.cpp:1330
+#, no-c-format
+msgid ""
+"_: FestivalVoiceName\n"
+"Zulu Male"
+msgstr "組魯男性"
+
+#. i18n: file plugins/festivalint/voices line 520
+#: rc.cpp:1336 rc.cpp:1342 rc.cpp:1348 rc.cpp:1354 rc.cpp:1357
+#, no-c-format
+msgid ""
+"_: FestivalVoiceName\n"
+"American Female"
+msgstr "美國女性"
+
+#. i18n: file plugins/festivalint/voices line 640
+#: rc.cpp:1366
+#, no-c-format
+msgid ""
+"_: FestivalVoiceName\n"
+"British Female"
+msgstr "英國女性"
+
+#. i18n: file plugins/festivalint/voices line 652
+#: rc.cpp:1369
+#, no-c-format
+msgid ""
+"_: FestivalVoiceName\n"
+"French Canadian Male"
+msgstr "加拿大（法語）男性"
+
+#. i18n: file plugins/festivalint/voices line 664
+#: rc.cpp:1372
+#, no-c-format
+msgid ""
+"_: FestivalVoiceName\n"
+"French Canadian Female"
+msgstr "加拿大（法語）女性"
+
+#. i18n: file plugins/festivalint/voices line 676
+#: rc.cpp:1375
+#, no-c-format
+msgid ""
+"_: FestivalVoiceName\n"
+"German Male"
+msgstr "德國男性"
+
+#. i18n: file plugins/festivalint/voices line 688
+#: rc.cpp:1378
+#, no-c-format
+msgid ""
+"_: FestivalVoiceName\n"
+"German Female"
+msgstr "德國女性"
+
+#. i18n: file plugins/festivalint/voices line 700
+#: rc.cpp:1381
+#, no-c-format
+msgid ""
+"_: FestivalVoiceName\n"
+"Americas Spanish Male"
+msgstr "拉丁美洲（西班牙語）男性"
+
+#. i18n: file plugins/festivalint/voices line 712
+#: rc.cpp:1384
+#, no-c-format
+msgid ""
+"_: FestivalVoiceName\n"
+"Americas Spanish Female"
+msgstr "拉丁美洲（西班牙語）女性"
+
+#. i18n: file plugins/festivalint/voices line 724
+#: rc.cpp:1387
+#, no-c-format
+msgid ""
+"_: FestivalVoiceName\n"
+"Vietnamese Male"
+msgstr "越南男性"
+
+#. i18n: file plugins/festivalint/voices line 735
+#: rc.cpp:1390
+#, no-c-format
+msgid ""
+"_: FestivalVoiceName\n"
+"Vietnamese Female"
+msgstr "越南女性"
+
+#: filters/main.cpp:44
+msgid "Name of a KTTSD filter plugin (required)"
+msgstr "KTTSD 過濾器外掛程式名稱（需輸入）"
+
+#: filters/main.cpp:46
+msgid "Talker code passed to filter"
+msgstr "傳遞給過濾器的發音員碼"
+
+#: filters/main.cpp:48
+msgid "DCOP application ID passed to filter"
+msgstr "傳遞給過濾器的 DCOP 應用程式代碼"
+
+#: filters/main.cpp:52
+msgid ""
+"_: A string that appears in a single config file, not a group of config files\n"
+"Config file group name passed to filter"
+msgstr "傳遞給過濾器的設定檔群組名稱"
+
+#: filters/main.cpp:53
+msgid "Display list of available Filter PlugIns and exit"
+msgstr "顯示可用的過濾器外掛程式清單然後離開"
+
+#: filters/main.cpp:55
+msgid "Display tabs as \\t, otherwise they are removed"
+msgstr "將 tab 顯示為 \\t，否則移除"
+
+#: filters/main.cpp:56
+msgid "Display list of available filter plugins and exit"
+msgstr "顯示可用的過濾器外掛程式清單然後離開"
+
+#: filters/main.cpp:63
+msgid "testfilter"
+msgstr "testfilter"
+
+#: filters/main.cpp:64
+msgid "A utility for testing KTTSD filter plugins."
+msgstr "測試 KTTSD 過濾器外掛程式的工具。"
+
+#: filters/main.cpp:66 kcmkttsmgr/kcmkttsmgr.cpp:1085 kttsd/main.cpp:40
+#: kttsmgr/kttsmgr.cpp:63
+msgid "Maintainer"
+msgstr "維護者"
+
+#: kcmkttsmgr/addtalker.cpp:131 kcmkttsmgr/kcmkttsmgr.cpp:552
+#: libkttsd/talkercode.cpp:217
+msgid "Other"
+msgstr "其他"
+
+#: kcmkttsmgr/kcmkttsmgr.cpp:83
+msgid "Text interrupted. Message."
+msgstr "文字發音被中斷。有訊息。"
+
+#: kcmkttsmgr/kcmkttsmgr.cpp:89
+msgid "Resuming text."
+msgstr "恢復文字發音。"
+
+#: kcmkttsmgr/kcmkttsmgr.cpp:910
+msgid ""
+"You have made changes to the configuration but have not saved them yet.  Click "
+"Apply to save the changes or Cancel to abandon the changes."
+msgstr "您已經變更設定，但是還沒儲存。請點選「套用」以儲存設定，或是「取消」來取消更改。"
+
+#: kcmkttsmgr/kcmkttsmgr.cpp:1072
+msgid ""
+"<h1>Text-to-Speech</h1>"
+"<p>This is the configuration for the text-to-speech dcop service</p>"
+"<p>This allows other applications to access text-to-speech resources</p>"
+"<p>Be sure to configure a default language for the language you are using as "
+"this will be the language used by most of the applications</p>"
+msgstr ""
+"<h1>文字發音</h1>"
+"<p>這是文字發音 DCOP 服務的設定。</p>"
+"<p>它允許其他應用程式使用文字發音的資源。</p> "
+"<p>請確定已設定好您所使用的預設語言，這會被大部份的應用程式所套用。</p>"
+
+#: kcmkttsmgr/kcmkttsmgr.cpp:1080 kttsd/main.cpp:36
+#: players/artsplayer/artsplayer.cpp:240
+msgid "kttsd"
+msgstr "kttsd"
+
+#: kcmkttsmgr/kcmkttsmgr.cpp:1080
+msgid "KCMKttsMgr"
+msgstr "KCMKttsMgr"
+
+#: kcmkttsmgr/kcmkttsmgr.cpp:1082
+msgid "(c) 2002, José Pablo Ezequiel Fernández"
+msgstr "(c) 2002, José Pablo Ezequiel Fernández"
+
+#: kcmkttsmgr/kcmkttsmgr.cpp:1084
+msgid "Author"
+msgstr "作者"
+
+#: kcmkttsmgr/kcmkttsmgr.cpp:1086 kcmkttsmgr/kcmkttsmgr.cpp:1087
+#: kttsd/main.cpp:41 kttsd/main.cpp:42 kttsd/main.cpp:43
+#: kttsmgr/kttsmgr.cpp:64 kttsmgr/kttsmgr.cpp:65 kttsmgr/kttsmgr.cpp:66
+msgid "Contributor"
+msgstr "貢獻者"
+
+#: filters/sbd/sbdconf.cpp:240
+#: filters/stringreplacer/stringreplacerconf.cpp:425
+#: kcmkttsmgr/kcmkttsmgr.cpp:1244 libkttsd/selecttalkerdlg.cpp:167
+msgid "Code"
+msgstr "程式碼"
+
+#: kcmkttsmgr/kcmkttsmgr.cpp:1263
+msgid "Select Language"
+msgstr "選擇語言"
+
+#: kcmkttsmgr/kcmkttsmgr.cpp:1436
+msgid "Select Filter"
+msgstr "選取過濾器"
+
+#: kcmkttsmgr/kcmkttsmgr.cpp:1843
+msgid "&Jobs"
+msgstr "工作(&J)"
+
+#: kcmkttsmgr/kcmkttsmgr.cpp:2032
+msgid "Talker Configuration"
+msgstr "發音員設定"
+
+#: kcmkttsmgr/kcmkttsmgr.cpp:2088
+msgid "Filter Configuration"
+msgstr "過濾器設定"
+
+#: filters/stringreplacer/stringreplacerconf.cpp:150
+#: kcmkttsmgr/kcmkttsmgr.cpp:2241
+msgid "Unable to open file."
+msgstr "無法開啟檔案。"
+
+#: filters/stringreplacer/stringreplacerconf.cpp:156
+#: kcmkttsmgr/kcmkttsmgr.cpp:2247
+msgid "File not in proper XML format."
+msgstr "檔案不是正確的 XML 格式。"
+
+#: filters/stringreplacer/stringreplacerconf.cpp:287
+#: kcmkttsmgr/kcmkttsmgr.cpp:2291
+msgid "Unable to open file "
+msgstr "無法開啟檔案"
+
+#: kcmkttsmgr/kcmkttsmgr.cpp:2375 libkttsd/talkercode.cpp:140
+msgid "default"
+msgstr "預設"
+
+#: kcmkttsmgr/kcmkttsmgr.cpp:2481 kcmkttsmgr/kcmkttsmgr.cpp:2487
+msgid "sample notification message"
+msgstr "範例通知訊息"
+
+#: kcmkttsmgr/kcmkttsmgr.cpp:2485
+msgid "sample application"
+msgstr "範例應用程式"
+
+#: kcmkttsmgr/kcmkttsmgr.cpp:2486
+msgid "sample event"
+msgstr "範例事件"
+
+#: kcmkttsmgr/kcmkttsmgr.cpp:2527
+msgid "Default (all other events)"
+msgstr "預設（所有其他的事件）"
+
+#: kcmkttsmgr/kcmkttsmgr.cpp:2536 kcmkttsmgr/selectevent.cpp:113
+msgid "All other %1 events"
+msgstr "所有其他 %1 個事件"
+
+#: kcmkttsmgr/kcmkttsmgr.cpp:2581
+msgid "Select Event"
+msgstr "選擇事件"
+
+#: kcmkttsmgr/kcmkttsmgr.cpp:2663 kcmkttsmgr/kcmkttsmgr.cpp:2679
+msgid ""
+"_: file type\n"
+"Notification Event List"
+msgstr "通知事件清單"
+
+#: filters/stringreplacer/stringreplacerconf.cpp:702
+#: filters/stringreplacer/stringreplacerconf.cpp:718
+#: kcmkttsmgr/kcmkttsmgr.cpp:2670 kcmkttsmgr/kcmkttsmgr.cpp:2686
+msgid "Error Opening File"
+msgstr "開啟檔案時發生錯誤"
+
+#: kcmkttsmgr/selectevent.cpp:68 libkttsd/notify.cpp:154
+msgid "No description available"
+msgstr "沒有可用的描述"
+
+#: kttsd/kttsd.cpp:133
+msgid ""
+"KTTS has not yet been configured.  At least one Talker must be configured.  "
+"Would you like to configure it now?"
+msgstr "KTTS 尚未設定。至少要設定一個發音員。您要現在設定嗎？"
+
+#: kttsd/kttsd.cpp:135
+msgid "KTTS Not Configured"
+msgstr "KTTS 尚未設定"
+
+#: kttsd/kttsd.cpp:137
+msgid "Do Not Configure"
+msgstr "不要設定"
+
+#: kttsd/main.cpp:37
+msgid "Text-to-speech synthesis deamon"
+msgstr "文字發音合程守護程式"
+
+#: kttsd/main.cpp:39 kttsmgr/kttsmgr.cpp:62
+msgid "Original Author"
+msgstr "原始作者"
+
+#: kttsd/main.cpp:44 kttsd/main.cpp:45 kttsmgr/kttsmgr.cpp:67
+#: kttsmgr/kttsmgr.cpp:68 plugins/command/commandconf.cpp:163
+#: plugins/epos/eposconf.cpp:229 plugins/festivalint/festivalintconf.cpp:577
+#: plugins/flite/fliteconf.cpp:150 plugins/freetts/freettsconf.cpp:178
+#: plugins/hadifix/hadifixconf.cpp:342
+msgid "Testing"
+msgstr "測試"
+
+#: kttsjobmgr/kttsjobmgr.cpp:85
+msgid "KttsJobMgr"
+msgstr "KttsJobMgr"
+
+#: kttsjobmgr/kttsjobmgr.cpp:114
+msgid "Job Num"
+msgstr "工作編號"
+
+#: kttsjobmgr/kttsjobmgr.cpp:115
+msgid "Owner"
+msgstr "擁有者"
+
+#: kttsjobmgr/kttsjobmgr.cpp:116
+msgid "Talker ID"
+msgstr "發音員代號"
+
+#: kttsjobmgr/kttsjobmgr.cpp:117
+msgid "State"
+msgstr "狀態"
+
+#: kttsjobmgr/kttsjobmgr.cpp:118
+msgid "Position"
+msgstr "位置"
+
+#: kttsjobmgr/kttsjobmgr.cpp:119
+msgid "Sentences"
+msgstr "句子"
+
+#: kttsjobmgr/kttsjobmgr.cpp:120
+msgid "Part Num"
+msgstr "工作部份編號"
+
+#: kttsjobmgr/kttsjobmgr.cpp:121
+msgid "Parts"
+msgstr "工作部份"
+
+#: kttsjobmgr/kttsjobmgr.cpp:127
+msgid ""
+"<p>These are all the text jobs.  The <b>State</b> column may be:"
+"<ul>"
+"<li><b>Queued</b> - the job is waiting and will not be spoken until its state "
+"is changed to <b>Waiting</b> by clicking the <b>Resume</b> or <b>Restart</b> "
+"buttons.</li>"
+"<li><b>Waiting</b> - the job is ready to be spoken.  It will be spoken when the "
+"jobs preceding it in the list have finished.</li>"
+"<li><b>Speaking</b> - the job is speaking.  The <b>Position</b> "
+"column shows the current sentence of the job being spoken.  You may pause a "
+"speaking job by clicking the <b>Hold</b> button.</li>"
+"<li><b>Paused</b> - the job is currently paused.  Paused jobs prevent jobs "
+"below them from speaking.  Use the <b>Resume</b> or <b>Restart</b> "
+"buttons to resume speaking the job, or click <b>Later</b> "
+"to move the job down in the list.</li>"
+"<li><b>Finished</b> - the job has finished speaking.  When a second job "
+"finishes, this one will be deleted.  You may click <b>Restart</b> "
+"to repeat the job.</li></ul><em>Note</em>: Messages, Warnings, and Screen "
+"Reader Output do not appear in this list.  See the Handbook for more "
+"information.</p>"
+msgstr ""
+"<p>這些是所有的文字發音工作。<b>狀態</b>欄位可能為： "
+"<ul>"
+"<li><b>已送進佇列</b>：此工作已經在等待，但是除非點選<b>恢復</b>或<b>重新開始</b>讓狀態變成<b>等待中</b>"
+"，否則不會被執行。</li> "
+"<li><b>等待中</b>：此工作已經準備好被執行了，正在等待執行中的工作結束。</li> "
+"<li><b>執行中</b>：此工作正在執行。<b>位置</b>欄位顯示目前正在唸的句子。您可以按下<b>暫停</b>來暫停此工作。</li> "
+"<li><b>已暫停</b>：此工作目前暫停執行。之後的工作也不會被執行。用<b>恢復</b>或<b>重新開始</b>來恢復工作，或是<b>延後</b>"
+"將工作放到清單的底部。</li> "
+"<li><b>已完成</b>：此工作已完成。當下一個工作也完成後，這個工作就會被刪除。您可以點選<b>重新開始</b>來重新執行工作。</li></ul> "
+"<em>注意：</em>訊息、警告與螢幕讀取輸出不會出現在此清單中。詳情請參考手冊。</p>"
+
+#: kttsjobmgr/kttsjobmgr.cpp:176
+msgid "Hold"
+msgstr "暫停"
+
+#: kttsjobmgr/kttsjobmgr.cpp:178
+msgid ""
+"<p>Changes a job to Paused state.  If currently speaking, the job stops "
+"speaking.  Paused jobs prevent jobs that follow them from speaking, so either "
+"click <b>Resume</b> to make the job speakable, or click <b>Later</b> "
+"to move it down in the list.</p>"
+msgstr ""
+"<p>將工作狀態變更為「已暫停」。如果正在發音，這個工作會暫停發音。之後的工作也會被卡住不會執行。點選<b>恢復</b>可以恢復工作，或是<b>延後</b>"
+"將工作移到清單底部。</p>"
+
+#: kttsjobmgr/kttsjobmgr.cpp:185 kttsmgr/kttsmgr.cpp:186
+msgid "Resume"
+msgstr "恢復"
+
+#: kttsjobmgr/kttsjobmgr.cpp:187
+msgid ""
+"<p>Resumes a paused job or changes a Queued job to Waiting.  If the job is the "
+"top speakable job in the list, it begins speaking.</p>"
+msgstr "<p>恢復已暫停的工作，或將已送進佇列的工作狀態改為「等待中」。如果此工作在清單的最頂端，則會開始工作。</p>"
+
+#: kttsjobmgr/kttsjobmgr.cpp:192
+msgid "R&estart"
+msgstr "重新開始(&E)"
+
+#: kttsjobmgr/kttsjobmgr.cpp:194
+msgid ""
+"<p>Rewinds a job to the beginning and changes its state to Waiting.  If the job "
+"is the top speakable job in the list, it begins speaking.</p>"
+msgstr "<p>讓此工作從頭開始，並將狀態改變為「等待中」。如果此工作在清單的最頂端，則開始工作。</p>"
+
+#: kttsjobmgr/kttsjobmgr.cpp:201
+msgid ""
+"<p>Deletes the job.  If it is currently speaking, it stops speaking.  The next "
+"speakable job in the list begins speaking.</p>"
+msgstr "<p>刪除此工作。如果它正在工作，則會停止。下一個工作會開始執行。</p>"
+
+#: kttsjobmgr/kttsjobmgr.cpp:206
+msgid "&Later"
+msgstr "延後(&L)"
+
+#: kttsjobmgr/kttsjobmgr.cpp:208
+msgid ""
+"<p>Moves a job downward in the list so that it will be spoken later.  If the "
+"job is currently speaking, its state changes to Paused.</p>"
+msgstr "<p>將工作移到清單的最底部，稍後會繼續工作。如果此工作正在執行，它的狀態會改變為「已暫停」。</p>"
+
+#: kttsjobmgr/kttsjobmgr.cpp:214
+msgid "Pre&vious Part"
+msgstr "上一部份(&V)"
+
+#: kttsjobmgr/kttsjobmgr.cpp:216
+msgid "<p>Rewinds a multi-part job to the previous part.</p>"
+msgstr "<p>回到上一部份的工作。</p>"
+
+#: kttsjobmgr/kttsjobmgr.cpp:220
+msgid "&Previous Sentence"
+msgstr "上一句(&P)"
+
+#: kttsjobmgr/kttsjobmgr.cpp:222
+msgid "<p>Rewinds a job to the previous sentence.</p>"
+msgstr "<p>回到上一句。</p>"
+
+#: kttsjobmgr/kttsjobmgr.cpp:226
+msgid "&Next Sentence"
+msgstr "下一句(&N)"
+
+#: kttsjobmgr/kttsjobmgr.cpp:228
+msgid "<p>Advances a job to the next sentence.</p>"
+msgstr "<p>跳到下一句。</p>"
+
+#: kttsjobmgr/kttsjobmgr.cpp:232
+msgid "Ne&xt Part"
+msgstr "下一部份"
+
+#: kttsjobmgr/kttsjobmgr.cpp:234
+msgid "<p>Advances a multi-part job to the next part.</p>"
+msgstr "<p>跳到下一部份的工作。</p>"
+
+#: kttsjobmgr/kttsjobmgr.cpp:239
+msgid "&Speak Clipboard"
+msgstr "唸出剪貼簿中的內容(&S)"
+
+#: kttsjobmgr/kttsjobmgr.cpp:241
+msgid ""
+"<p>Queues the current contents of the clipboard for speaking and sets its state "
+"to Waiting.  If the job is the topmost in the list, it begins speaking.  The "
+"job will be spoken by the topmost Talker in the <b>Talkers</b> tab.</p>"
+msgstr "<p>將目前剪貼簿中的內容送進工作清單，並標技為「等待中」。如果此工作在清單的最頂端，則開始執行。它會用預設的發音員來讀。</p>"
+
+#: kttsjobmgr/kttsjobmgr.cpp:247
+msgid "Spea&k File"
+msgstr "唸出檔案內容(&K)"
+
+#: kttsjobmgr/kttsjobmgr.cpp:249
+msgid ""
+"<p>Prompts you for a file name and queues the contents of the file for "
+"speaking.  You must click the <b>Resume</b> button before the job will be "
+"speakable.  The job will be spoken by the topmost Talker in the <b>Talkers</b> "
+"tab.</p>"
+msgstr "<p>讓您選擇一個檔案，並將檔案內容送進工作清單。您必須點選<b>恢復</b>才能讓它開始工作。它會用預設的發音員來讀。</p>"
+
+#: kttsjobmgr/kttsjobmgr.cpp:255
+msgid "Change Talker"
+msgstr "變更發音員"
+
+#: kttsjobmgr/kttsjobmgr.cpp:257
+msgid ""
+"<p>Prompts you with a list of your configured Talkers from the <b>Talkers</b> "
+"tab.  The job will be spoken using the selected Talker.</p>"
+msgstr "<p>讓您選擇發音員。這個工作會使用所選取的發音員來讀。</p>"
+
+#: kttsjobmgr/kttsjobmgr.cpp:262
+msgid "&Refresh"
+msgstr "刷新(&R)"
+
+#: kttsjobmgr/kttsjobmgr.cpp:264
+msgid "<p>Refresh the list of jobs.</p>"
+msgstr "<p>刷新工作清單。</p>"
+
+#: kttsjobmgr/kttsjobmgr.cpp:278
+msgid "Current Sentence"
+msgstr "目前的句子"
+
+#: kttsjobmgr/kttsjobmgr.cpp:288
+msgid "<p>The text of the sentence currently speaking.</p>"
+msgstr "<p>目前正在唸的句子。</p>"
+
+#: kttsjobmgr/kttsjobmgr.cpp:585 kttsmgr/kttsmgr.cpp:251
+msgid "Queued"
+msgstr "已送進佇列"
+
+#: kttsjobmgr/kttsjobmgr.cpp:586 kttsmgr/kttsmgr.cpp:252
+msgid "Waiting"
+msgstr "等待中"
+
+#: kttsjobmgr/kttsjobmgr.cpp:587 kttsmgr/kttsmgr.cpp:253
+msgid "Speaking"
+msgstr "執行中"
+
+#: kttsjobmgr/kttsjobmgr.cpp:588 kttsmgr/kttsmgr.cpp:254
+msgid "Paused"
+msgstr "已暫停"
+
+#: kttsjobmgr/kttsjobmgr.cpp:589 kttsmgr/kttsmgr.cpp:255
+msgid "Finished"
+msgstr "已完成"
+
+#: kttsjobmgr/kttsjobmgr.cpp:590 kttsmgr/kttsmgr.cpp:256
+#: plugins/festivalint/festivalintconf.cpp:314
+#: plugins/festivalint/festivalintconf.cpp:519
+msgid "Unknown"
+msgstr "未知"
+
+#: kttsmgr/kttsmgr.cpp:49
+msgid "Start minimized in system tray"
+msgstr "啟動時縮小到系統匣中"
+
+#: kttsmgr/kttsmgr.cpp:51
+msgid "Exit when speaking is finished and minimized in system tray"
+msgstr "唸完時離開並縮小到系統匣中"
+
+#: kttsmgr/kttsmgr.cpp:59
+msgid "KTTSMgr"
+msgstr "KTTSMgr"
+
+#: kttsmgr/kttsmgr.cpp:60
+msgid "Text-to-Speech Manager"
+msgstr "文字發音管理者"
+
+#: kttsmgr/kttsmgr.cpp:89
+msgid "KDE Text-to-Speech Manager"
+msgstr "KDE 文字發音管理者"
+
+#: kttsmgr/kttsmgr.cpp:156
+msgid "<qt>Text-to-Speech Manager"
+msgstr "<qt>文字發音管理者"
+
+#: kttsmgr/kttsmgr.cpp:182
+msgid "&Speak Clipboard Contents"
+msgstr "唸出剪貼簿中的內容(&S)"
+
+#: kttsmgr/kttsmgr.cpp:184
+msgid "&Hold"
+msgstr "暫停(&H)"
+
+#: kttsmgr/kttsmgr.cpp:189
+msgid "KTTS &Handbook"
+msgstr "KTTS 手冊(&H)"
+
+#: kttsmgr/kttsmgr.cpp:191
+msgid "&About KTTSMgr"
+msgstr "關於 KTTSMgr(&A)"
+
+#: kttsmgr/kttsmgr.cpp:262
+msgid "Text-to-Speech System is not running"
+msgstr "文字發音系統尚未執行"
+
+#: kttsmgr/kttsmgr.cpp:264
+#, c-format
+msgid ""
+"_n: 1 job\n"
+"%n jobs"
+msgstr "%n 個工作"
+
+#: kttsmgr/kttsmgr.cpp:275
+msgid ", current job %1 at sentence %2 of %3 sentences"
+msgstr "，目前的工作為 %1，唸到第 %2 個句子，共 %3 個句子"
+
+#: libkttsd/notify.cpp:49
+msgid "Speak event name"
+msgstr "唸出事件名稱"
+
+#: libkttsd/notify.cpp:50
+msgid "Speak the notification message"
+msgstr "唸出通知訊息"
+
+#: libkttsd/notify.cpp:51
+msgid "Do not speak the notification"
+msgstr "不要唸出通知"
+
+#: libkttsd/notify.cpp:52
+msgid "Speak custom text:"
+msgstr "唸出自訂文字："
+
+#: libkttsd/notify.cpp:106
+msgid "none"
+msgstr "無"
+
+#: libkttsd/notify.cpp:107
+msgid "notification dialogs"
+msgstr "通知對話框"
+
+#: libkttsd/notify.cpp:108
+msgid "passive popups"
+msgstr "選單"
+
+#: libkttsd/notify.cpp:109
+msgid "notification dialogs and passive popups"
+msgstr "通知對話框與選單"
+
+#: libkttsd/notify.cpp:110
+msgid "all notifications"
+msgstr "所有的通知"
+
+#: libkttsd/pluginproc.cpp:184
+msgid "Local"
+msgstr "本地端"
+
+#: libkttsd/pluginproc.cpp:188
+msgid "Latin1"
+msgstr "Latin1"
+
+#: libkttsd/pluginproc.cpp:189
+msgid "Unicode"
+msgstr "Unicode"
+
+#: filters/sbd/sbdconf.cpp:268
+#: filters/stringreplacer/stringreplacerconf.cpp:453
+#: libkttsd/selecttalkerdlg.cpp:190
+msgid "Select Languages"
+msgstr "選擇語言"
+
+#: libkttsd/talkercode.cpp:227
+msgid ""
+"_: full country name\n"
+"United States of America"
+msgstr "美利堅合眾國"
+
+#: libkttsd/talkercode.cpp:228
+msgid ""
+"_: abbreviated country name\n"
+"USA"
+msgstr "USA"
+
+#: libkttsd/talkercode.cpp:229
+msgid ""
+"_: full country name\n"
+"United Kingdom"
+msgstr "大英國協"
+
+#: libkttsd/talkercode.cpp:230
+msgid ""
+"_: abbreviated country name\n"
+"UK"
+msgstr "UK"
+
+#: libkttsd/talkercode.cpp:242 libkttsd/talkercode.cpp:251
+msgid "male"
+msgstr "男性"
+
+#: libkttsd/talkercode.cpp:244 libkttsd/talkercode.cpp:253
+msgid "female"
+msgstr "女性"
+
+#: libkttsd/talkercode.cpp:246 libkttsd/talkercode.cpp:255
+msgid ""
+"_: neutral gender\n"
+"neutral"
+msgstr "中性"
+
+#: libkttsd/talkercode.cpp:262 libkttsd/talkercode.cpp:271
+msgid ""
+"_: medium sound\n"
+"medium"
+msgstr "中等音量"
+
+#: libkttsd/talkercode.cpp:264 libkttsd/talkercode.cpp:273
+msgid ""
+"_: loud sound\n"
+"loud"
+msgstr "大聲"
+
+#: libkttsd/talkercode.cpp:266 libkttsd/talkercode.cpp:275
+msgid ""
+"_: soft sound\n"
+"soft"
+msgstr "小聲"
+
+#: libkttsd/talkercode.cpp:282 libkttsd/talkercode.cpp:291
+msgid ""
+"_: medium speed\n"
+"medium"
+msgstr "中等速度"
+
+#: libkttsd/talkercode.cpp:284 libkttsd/talkercode.cpp:293
+msgid ""
+"_: fast speed\n"
+"fast"
+msgstr "快速"
+
+#: libkttsd/talkercode.cpp:286 libkttsd/talkercode.cpp:295
+msgid ""
+"_: slow speed\n"
+"slow"
+msgstr "慢速"
+
+#: app-plugins/kate/katekttsd.cpp:77
+msgid "Speak Text"
+msgstr "唸出文字"
+
+#: app-plugins/kate/katekttsd.cpp:100
+msgid "Starting KTTSD Failed"
+msgstr "KTTSD 啟動失敗"
+
+#: app-plugins/kate/katekttsd.cpp:110 app-plugins/kate/katekttsd.cpp:117
+msgid "DCOP Call Failed"
+msgstr "DCOP 呼叫失敗"
+
+#: app-plugins/kate/katekttsd.cpp:111
+msgid "The DCOP call setText failed."
+msgstr "DCOP 呼叫 setText 時失敗。"
+
+#: app-plugins/kate/katekttsd.cpp:118
+msgid "The DCOP call startText failed."
+msgstr "DCOP 呼叫 startText 時失敗。"
+
+#: filters/sbd/sbdproc.cpp:422
+msgid "Invalid S S M L."
+msgstr "不合法的 S S M L。"
+
+#: filters/stringreplacer/stringreplacerconf.cpp:238
+#: filters/stringreplacer/stringreplacerconf.cpp:574
+#: filters/stringreplacer/stringreplacerconf.cpp:609
+msgid ""
+"_: Abbreviation for 'Regular Expression'\n"
+"RegExp"
+msgstr "正規式"
+
+#: filters/stringreplacer/stringreplacerconf.cpp:238
+#: filters/stringreplacer/stringreplacerconf.cpp:333
+#: filters/stringreplacer/stringreplacerconf.cpp:607
+msgid "Word"
+msgstr "單字"
+
+#: filters/stringreplacer/stringreplacerconf.cpp:378
+#: filters/stringreplacer/stringreplacerconf.cpp:413
+msgid "String Replacer"
+msgstr "取代字串"
+
+#: filters/stringreplacer/stringreplacerconf.cpp:411
+#: filters/stringreplacer/stringreplacerconf.cpp:488
+#: filters/stringreplacer/stringreplacerconf.cpp:492
+msgid "Multiple Languages"
+msgstr "多種語言"
+
+#: filters/stringreplacer/stringreplacerconf.cpp:595
+msgid "Edit String Replacement"
+msgstr "編輯取代字串"
+
+#: filters/talkerchooser/talkerchooserconf.cpp:164
+msgid "Talker Chooser"
+msgstr "發音員選擇器"
+
+#: filters/xmltransformer/xmltransformerconf.cpp:141
+msgid "XML Transformer"
+msgstr "XML 轉換器"
+
+#: players/artsplayer/artsplayer.cpp:79
+msgid "Cannot find the aRts soundserver."
+msgstr "找不到 aRts 聲音伺服器。"
+
+#: players/artsplayer/artsplayer.cpp:235
+msgid ""
+"Connecting/starting aRts soundserver failed. Make sure that artsd is configured "
+"properly."
+msgstr "連接/啟動 aRts 音效伺服器時發生錯誤，請確定你的 artsd 已正確設定。"
+
+#: plugins/command/commandconf.cpp:164 plugins/epos/eposconf.cpp:230
+#: plugins/flite/fliteconf.cpp:151 plugins/freetts/freettsconf.cpp:179
+#: plugins/hadifix/hadifixconf.cpp:343
+msgid "Testing."
+msgstr "測試中。"
+
+#: plugins/festivalint/festivalintconf.cpp:406
+msgid "Scanning... Please wait."
+msgstr "掃描中，請稍候。"
+
+#: plugins/festivalint/festivalintconf.cpp:421
+msgid "Query Voices"
+msgstr "查詢聲音"
+
+#: plugins/festivalint/festivalintconf.cpp:422
+msgid ""
+"Querying Festival for available voices.  This could take up to 15 seconds."
+msgstr "查詢 Festival 可用的聲音。可能需要一點時間。"
+
+#: plugins/festivalint/festivalintconf.cpp:578
+msgid ""
+"Testing.  MultiSyn voices require several seconds to load.  Please be patient."
+msgstr "測試中。載入 MultiSync 聲音需要一些時間。請稍候。"
+
+#: plugins/freetts/freettsconf.cpp:96
+msgid ""
+"Unable to locate freetts.jar in your path.\n"
+"Please specify the path to freetts.jar in the Properties tab before using KDE "
+"Text-to-Speech"
+msgstr "找不到 freetts.jar。請先在「內容」中指定 freetts.jar 的路徑。"
+
+#: plugins/freetts/freettsconf.cpp:96
+msgid "KDE Text-to-Speech"
+msgstr "KDE 文字發音系統"
+
+#: plugins/hadifix/hadifixconf.cpp:95
+msgid "Male voice \"%1\""
+msgstr "男性聲音「%1」"
+
+#: plugins/hadifix/hadifixconf.cpp:97 plugins/hadifix/hadifixconf.cpp:100
+msgid "Female voice \"%1\""
+msgstr "女性聲音「%1」"
+
+#: plugins/hadifix/hadifixconf.cpp:102 plugins/hadifix/hadifixconf.cpp:103
+msgid "Unknown voice \"%1\""
+msgstr "未知的聲音「%1」"
+
+#: plugins/hadifix/hadifixconf.cpp:216
+msgid "This plugin is distributed under the terms of the GPL v2 or later."
+msgstr "此外掛程式以 GPL 第二版或更新的版本散佈。"
+
+#: plugins/hadifix/hadifixconf.cpp:300
+msgid "Voice File - Hadifix Plugin"
+msgstr "語音檔案─Hadifix 外掛程式"
+
+#: plugins/hadifix/voicefileui.ui.h:27
+msgid "The gender of the voice file %1 could not be detected."
+msgstr "無法偵測聲音檔案 %1 的性別。"
+
+#: plugins/hadifix/voicefileui.ui.h:28 plugins/hadifix/voicefileui.ui.h:33
+msgid "Trying to Determine the Gender - Hadifix Plug In"
+msgstr "試著決定性別─Hadifix 外掛程式"
+
+#: plugins/hadifix/voicefileui.ui.h:32
+msgid "The file %1 does not seem to be a voice file."
+msgstr "檔案 %1 似乎不是聲音檔。"
+
+#: _translatorinfo.cpp:1
+msgid ""
+"_: NAME OF TRANSLATORS\n"
+"Your names"
+msgstr "Frank Weng (a.k.a. Franklin)"
+
+#: _translatorinfo.cpp:3
+msgid ""
+"_: EMAIL OF TRANSLATORS\n"
+"Your emails"
+msgstr "franklin at goodhorse dot idv dot tw"
diff --git a/tde-i18n-zh_TW/messages/tdeaccessibility/libKTTSD.po b/tde-i18n-zh_TW/messages/tdeaccessibility/libKTTSD.po
new file mode 100644
index 00000000000..1ab7dfc3e86
--- /dev/null
+++ b/tde-i18n-zh_TW/messages/tdeaccessibility/libKTTSD.po
@@ -0,0 +1,51 @@
+# translation of libKTTSD.po to Traditional Chinese
+#
+# Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv dot tw>, 2006.
+msgid ""
+msgstr ""
+"Project-Id-Version: libKTTSD\n"
+"POT-Creation-Date: 2005-05-08 01:29+0200\n"
+"PO-Revision-Date: 2006-06-06 10:40+0800\n"
+"Last-Translator: Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv "
+"dot tw>\n"
+"Language-Team: Traditional Chinese <zh_l10n@linux.org.tw>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: KBabel 1.11.2\n"
+
+#: kttsdlib.cpp:71
+msgid "<qt><big><u>Description:</u></big><br>"
+msgstr "<qt><big><u>描述：</u></big><br>"
+
+#: kttsdlib.cpp:72
+msgid "This plugin uses the KDE TTS Daemon for speech output."
+msgstr "此外掛程式使用 KTTSD 做語音輸出。"
+
+#: kttsdlibsetupimpl.cpp:51
+msgid "Control Center Module for KTTSD not found."
+msgstr "找不到 KTTSD 的控制中心模組。"
+
+#: kttsdlibsetupimpl.cpp:52
+msgid "Problem"
+msgstr "問題"
+
+#. i18n: file KTTSDlibSetup.ui line 16
+#: rc.cpp:3
+#, no-c-format
+msgid "KTTSD-Setup"
+msgstr "KTTSD 設定"
+
+#. i18n: file KTTSDlibSetup.ui line 35
+#: rc.cpp:6
+#, no-c-format
+msgid ""
+"<p align=\"center\">If you would like to change the configuration of KTTSD "
+"please use the KDE Control Center or click the button below.</p>"
+msgstr "<p align=\"center\">如果您要變更 KTTSD 的設定，請使用 KDE 控制中心，或按下方的按鍵。</p>"
+
+#. i18n: file KTTSDlibSetup.ui line 85
+#: rc.cpp:9
+#, no-c-format
+msgid "Launch Control Center"
+msgstr "叫出控制中心"