1 files changed, 678 insertions, 0 deletions
diff --git a/tde-i18n-da/messages/tdeadmin/kcmlilo.po b/tde-i18n-da/messages/tdeadmin/kcmlilo.po
new file mode 100644
index 00000000000..c7f969b9f53
--- /dev/null
+++ b/tde-i18n-da/messages/tdeadmin/kcmlilo.po
@@ -0,0 +1,678 @@
+# Danish translation of kcmlilo
+# Copyright (C).
+#
+# Erik Kjær Pedersen <erik@binghamton.edu>, 2000, 2004, 2005.
+msgid ""
+msgstr ""
+"Project-Id-Version: kcmlilo\n"
+"POT-Creation-Date: 2007-03-13 02:18+0100\n"
+"PO-Revision-Date: 2005-12-29 08:26-0500\n"
+"Last-Translator: Erik Kjær Pedersen <erik@binghamton.edu>\n"
+"Language-Team: Danish <dansk@klid.dk>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: KBabel 1.11\n"
+
+#: kde-qt-common/EditWidget.cpp:43
+msgid "Select..."
+msgstr "Vælg..."
+
+#: kde-qt-common/expert.cpp:41
+msgid ""
+"You can edit the lilo.conf file directly here. All changes you make here are "
+"automatically transferred to the graphical interface."
+msgstr ""
+"Her kan du redigere lilo.conf-filen direkte. Alle ændringer du laver her, "
+"bliver automatisk overført til den grafiske brugerflade."
+
+#: kde-qt-common/general.cpp:45
+msgid "Install &boot record to drive/partition:"
+msgstr "Installér &boot-record til drev/partition:"
+
+#: kde-qt-common/general.cpp:55
+msgid ""
+"Select the drive or partition you want to install the LILO boot loader to here. "
+"Unless you intend to use other boot managers in addition to LILO, this should "
+"be the MBR (master boot record) of your boot drive."
+"<br>In this case, you should probably select <i>/dev/hda</i> "
+"if your boot drive is an IDE drive or <i>/dev/sda</i> "
+"if your boot drive is SCSI."
+msgstr ""
+"Vælg her det drev eller den partition hvor du ønsker at installere "
+"LILO-bootloaderen. Det bør være MBR (master boot record) eller dit bootdrev "
+"medmindre du ønsker at bruge andre bootmanagere foruden LILO."
+"<br>I dette tilfælde bør du formodentlig vælge <i>/dev/hda</i> "
+"hvis dit bootdrev er et IDE-drev, eller <i>/dev/sda</i> "
+"hvis dit bootdrev er SCSI."
+
+#: kde-qt-common/general.cpp:58
+msgid "Boot the default kernel/OS &after:"
+msgstr "Boot standardkerne/standard-OS &efter:"
+
+#: kde-qt-common/general.cpp:60
+msgid "/10 seconds"
+msgstr "/10 sekunder"
+
+#: kde-qt-common/general.cpp:64
+msgid ""
+"LILO will wait the amount of time specified here before booting the kernel (or "
+"OS) marked as <i>default</i> in the <b>Images</b> tab."
+msgstr ""
+"LILO vil vente i det angivne tidsrum før den booter kernen (eller OS'et) der er "
+"markeret som <i>standard</i> i <b>Images</b>-afdelingen."
+
+#: kde-qt-common/general.cpp:67
+msgid "Use &linear mode"
+msgstr "Brug &lineær tilstand"
+
+#: kde-qt-common/general.cpp:69
+msgid ""
+"Check this box if you want to use the linear mode."
+"<br>Linear mode tells the boot loader the location of kernels in linear "
+"addressing rather than sector/head/cylinder."
+"<br>linear mode is required for some SCSI drives, and shouldn't hurt unless "
+"you're planning to create a boot disk to be used with a different computer."
+"<br>See the lilo.conf man page for details."
+msgstr ""
+"Afkryds dette felt hvis du vil bruge lineær tilstand."
+"<br>Lineær tilstand fortæller bootloaderen placeringen af kernerne i lineær "
+"adressering snarere end sektor/hoved/cylinder."
+"<br>Lineær tilstand kræves af visse SCSI-drev og det burde ikke kunne skade "
+"medmindre du planlægger at lave en bootdisk som skal bruges med en anden "
+"computer."
+"<br>Se man-siden til lilo.conf for detaljer."
+
+#: kde-qt-common/general.cpp:70
+msgid "Use &compact mode"
+msgstr "Brug &kompakt-tilstand"
+
+#: kde-qt-common/general.cpp:72
+msgid ""
+"Check this box if you want to use the compact mode."
+"<br>The compact mode tries to merge read requests for adjacent sectors into a "
+"single read request. This reduces load time and keeps the boot map smaller, but "
+"will not work on all systems."
+msgstr ""
+"Afkryds dette felt hvis du vil bruge kompakt-tilstand."
+"<br> Kompakt-tilstand forsøger at samle læseforespørgsler for sektorer ved "
+"siden af hinanden i én læseforespørgsel. Dette reducerer indlæsningstiden og "
+"holder bootmap'et mindre, men det fungerer ikke på alle systemer."
+
+#: kde-qt-common/general.cpp:76 kde/Details.cpp:82 qt/Details.cpp:85
+msgid "&Record boot command lines for defaults"
+msgstr "&Optag bootkommandolinjer for standardopsætning"
+
+#: kde-qt-common/general.cpp:78
+msgid ""
+"Checking this box enables automatic recording of boot command lines as the "
+"defaults for the following boots. This way, lilo \"locks\" on a choice until it "
+"is manually overridden.\n"
+"This sets the <b>lock</b> option in lilo.conf."
+msgstr ""
+"Ved at afkrydse dette felt, vil bootkommandolinjer automatisk huskes som "
+"standard for efterfølgende boots. På den måde \"låser\" LILO et valg indtil det "
+"manuelt sættes ud af kraft.\n"
+"Dette sætter <b>lock</b>-indstillingen i lilo.conf."
+
+#: kde-qt-common/general.cpp:79 kde/Details.cpp:84 qt/Details.cpp:87
+msgid "R&estrict parameters"
+msgstr "B&egræns parametre"
+
+#: kde-qt-common/general.cpp:82
+msgid ""
+"If this box is checked, a password (entered below) is required only if any "
+"parameters are changed (i.e. the user can boot <i>linux</i>, but not <i>"
+"linux single</i> or <i>linux init=/bin/sh</i>).\n"
+"This sets the <b>restricted</b> option in lilo.conf."
+"<br>This sets a default for all Linux kernels you want to boot. If you need a "
+"per-kernel setting, go to the <i>Operating systems</i> tab and select <i>"
+"Details</i>."
+msgstr ""
+"Hvis dette felt er afkrydset, vil et kodeord (indtastet nedenfor) kun blive "
+"krævet hvis parametrene ændres (så brugeren kan boote <i>linux</i>, men ikke <i>"
+"linux single</i> eller <i>linux init=/bin/sh</i>).\n"
+"Dette sætter <b>restricted</b>-indstillingen i lilo.conf."
+"<br>Dette sætter en standard for alle Linux-kerner som du ønsker at boote. Hvis "
+"du ønsker en opsætning af hver kerne for sig, så gå til 'Operativsystemer' og "
+"vælg 'Detaljer'."
+
+#: kde-qt-common/general.cpp:86 kde/Details.cpp:89 qt/Details.cpp:93
+msgid "Require &password:"
+msgstr "Kræv &kodeord:"
+
+#: kde-qt-common/general.cpp:93
+msgid ""
+"Enter the password required for bootup (if any) here. If <i>restricted</i> "
+"above is checked, the password is required for additional parameters only."
+"<br><b>WARNING:</b> The password is stored in clear text in /etc/lilo.conf. "
+"You'll want to make sure nobody untrusted can read this file. Also, you "
+"probably don't want to use your normal/root password here."
+"<br>This sets a default for all Linux kernels you want to boot. If you need a "
+"per-kernel setting, go to the <i>Operating systems</i> tab and select <i>"
+"Details</i>."
+msgstr ""
+"Indtast det kodeord som kræves ved boot (hvis noget) her. Hvis 'begrænset' "
+"ovenfor er afkrydset, kræves kodeordet kun for ekstra parametre."
+"<br><b>ADVARSEL:</b> Kodeordet gemmes i klar tekst i /etc/lilo.conf. Du skal "
+"sørge for at det kun er folk du stoler på der læser denne fil. Du skal nok "
+"heller ikke bruge dit eget eller roots kodeord her."
+"<br>Dette sætter en standard for de Linux-kerner som du ønsker at boote. Hvis "
+"du ønsker en opsætning af hver kerne for sig, så gå til 'Operativsystemer' og "
+"vælg 'Detaljer'."
+
+#: kde-qt-common/general.cpp:97
+msgid "&Default graphics mode on text console:"
+msgstr "&Standard grafiktilstand på tekstkonsol:"
+
+#: kde-qt-common/general.cpp:100
+msgid ""
+"You can select the default graphics mode here."
+"<br>If you intend to use a VGA graphics mode, you must compile the kernel with "
+"support for framebuffer devices. The <i>ask</i> setting brings up a prompt at "
+"boot time."
+"<br>This sets a default for all Linux kernels you want to boot. If you need a "
+"per-kernel setting, go to the <i>Operating systems</i> tab and select <i>"
+"Details</i>."
+msgstr ""
+"Her kan du kan vælge standard grafiktilstand."
+"<br>Hvis du vil bruge en VGA-grafiktilstand, må du oversætte kernen med "
+"understøttelse af rammebuffer-enheder. <i>Spørg</i>-indstillingen forårsager et "
+"spørgsmål ved boot."
+"<br>Dette sætter en standard for alle Linux-kerner som du ønsker at boote. Hvis "
+"du ønsker en opsætning af hver kerne for sig, så gå til 'Operativsystemer' og "
+"vælg 'Detaljer'."
+
+#: kde-qt-common/general.cpp:101 kde/Details.cpp:48 qt/Details.cpp:48
+msgid "default"
+msgstr "standard"
+
+#: kde-qt-common/general.cpp:102 kde/Details.cpp:49 qt/Details.cpp:49
+msgid "ask"
+msgstr "spørg"
+
+#: kde-qt-common/general.cpp:103 kde/Details.cpp:50 qt/Details.cpp:50
+msgid "text 80x25 (0)"
+msgstr "tekst 80x25 (0)"
+
+#: kde-qt-common/general.cpp:104 kde/Details.cpp:51 qt/Details.cpp:51
+msgid "text 80x50 (1)"
+msgstr "tekst 80x50 (1)"
+
+#: kde-qt-common/general.cpp:105 kde/Details.cpp:52 qt/Details.cpp:52
+msgid "text 80x43 (2)"
+msgstr "tekst 80x43 (2)"
+
+#: kde-qt-common/general.cpp:106 kde/Details.cpp:53 qt/Details.cpp:53
+msgid "text 80x28 (3)"
+msgstr "tekst 80x28 (3)"
+
+#: kde-qt-common/general.cpp:107 kde/Details.cpp:54 qt/Details.cpp:54
+msgid "text 80x30 (4)"
+msgstr "tekst 80x30 (4)"
+
+#: kde-qt-common/general.cpp:108 kde/Details.cpp:55 qt/Details.cpp:55
+msgid "text 80x34 (5)"
+msgstr "tekst 80x34 (5)"
+
+#: kde-qt-common/general.cpp:109 kde/Details.cpp:56 qt/Details.cpp:56
+msgid "text 80x60 (6)"
+msgstr "tekst 80x60 (6)"
+
+#: kde-qt-common/general.cpp:110 kde/Details.cpp:57 qt/Details.cpp:57
+msgid "text 40x25 (7)"
+msgstr "tekst 40x25 (7)"
+
+#: kde-qt-common/general.cpp:111 kde/Details.cpp:58 qt/Details.cpp:58
+msgid "VGA 640x480, 256 colors (769)"
+msgstr "VGA 640x480, 256 farver (769)"
+
+#: kde-qt-common/general.cpp:112 kde/Details.cpp:59 qt/Details.cpp:59
+msgid "VGA 640x480, 32767 colors (784)"
+msgstr "VGA 640x480, 32767 farver (784)"
+
+#: kde-qt-common/general.cpp:113 kde/Details.cpp:60 qt/Details.cpp:60
+msgid "VGA 640x480, 65536 colors (785)"
+msgstr "VGA 640x480, 65536 farver (785)"
+
+#: kde-qt-common/general.cpp:114 kde/Details.cpp:61 qt/Details.cpp:61
+msgid "VGA 640x480, 16.7M colors (786)"
+msgstr "VGA 640x480, 16.7M farver (786)"
+
+#: kde-qt-common/general.cpp:115 kde/Details.cpp:62 qt/Details.cpp:62
+msgid "VGA 800x600, 256 colors (771)"
+msgstr "VGA 800x600, 256 farver (771)"
+
+#: kde-qt-common/general.cpp:116 kde/Details.cpp:63 qt/Details.cpp:63
+msgid "VGA 800x600, 32767 colors (787)"
+msgstr "VGA 800x600, 32767 farver (787)"
+
+#: kde-qt-common/general.cpp:117 kde/Details.cpp:64 qt/Details.cpp:64
+msgid "VGA 800x600, 65536 colors (788)"
+msgstr "VGA 800x600, 65536 farver (788)"
+
+#: kde-qt-common/general.cpp:118 kde/Details.cpp:65 qt/Details.cpp:65
+msgid "VGA 800x600, 16.7M colors (789)"
+msgstr "VGA 800x600, 16.7M farver (789)"
+
+#: kde-qt-common/general.cpp:119 kde/Details.cpp:66 qt/Details.cpp:66
+msgid "VGA 1024x768, 256 colors (773)"
+msgstr "VGA 1024x768, 256 farver (773)"
+
+#: kde-qt-common/general.cpp:120 kde/Details.cpp:67 qt/Details.cpp:67
+msgid "VGA 1024x768, 32767 colors (790)"
+msgstr "VGA 1024x768, 32767 farver (790)"
+
+#: kde-qt-common/general.cpp:121 kde/Details.cpp:68 qt/Details.cpp:68
+msgid "VGA 1024x768, 65536 colors (791)"
+msgstr "VGA 1024x768, 65536 farver (791)"
+
+#: kde-qt-common/general.cpp:122 kde/Details.cpp:69 qt/Details.cpp:69
+msgid "VGA 1024x768, 16.7M colors (792)"
+msgstr "VGA 1024x768, 16.7M farver (792)"
+
+#: kde-qt-common/general.cpp:123 kde/Details.cpp:70 qt/Details.cpp:70
+msgid "VGA 1280x1024, 256 colors (775)"
+msgstr "VGA 1280x1024, 256 farver (775)"
+
+#: kde-qt-common/general.cpp:124 kde/Details.cpp:71 qt/Details.cpp:71
+msgid "VGA 1280x1024, 32767 colors (793)"
+msgstr "VGA 1280x1024, 32767 farver (793)"
+
+#: kde-qt-common/general.cpp:125 kde/Details.cpp:72 qt/Details.cpp:72
+msgid "VGA 1280x1024, 65536 colors (794)"
+msgstr "VGA 1280x1024, 65536 farver (794)"
+
+#: kde-qt-common/general.cpp:126 kde/Details.cpp:73 qt/Details.cpp:73
+msgid "VGA 1280x1024, 16.7M colors (795)"
+msgstr "VGA 1280x1024, 16.7M farver (795)"
+
+#: kde-qt-common/general.cpp:130
+msgid "Enter LILO &prompt automatically"
+msgstr "Indtast LILO-&forespørgsel automatisk"
+
+#: kde-qt-common/general.cpp:131
+msgid ""
+"If this box is checked, LILO goes to the LILO prompt whether or not a key is "
+"pressed. If it is turned off, LILO boots the default operating system unless "
+"shift is pressed (in that case, it goes to the LILO prompt)."
+"<br>This sets the <i>prompt</i> option in lilo.conf."
+msgstr ""
+"Hvis dette felt er afkrydset, vil LILO gå til en forespørgsel hvad enten en "
+"tast er trykket eller ej. Hvis det er slået fra, så booter LILO "
+"standard-operativsystemet medmindre man trykker på Shift (i hvilket tilfælde "
+"den går til LILO-forespørgslen). Dette sætter <i>prompt</i>"
+"-indstillingen i lilo.conf."
+
+#: kde-qt-common/images.cpp:53
+msgid ""
+"This is the list of kernels and operating systems you can currently boot. "
+"Select which one you want to edit here."
+msgstr ""
+"Dette er listen af kerner og operativsystemer som du kan boote for øjeblikket. "
+"Vælg her det du ønsker at ændre."
+
+#: kde-qt-common/images.cpp:59 kde-qt-common/images.cpp:281
+msgid "&Kernel:"
+msgstr "&Kerne:"
+
+#: kde-qt-common/images.cpp:60 kde-qt-common/images.cpp:187
+msgid "Enter the filename of the kernel you want to boot here."
+msgstr "Indtast her filnavnet på den kerne du vil boote."
+
+#: kde-qt-common/images.cpp:62 kde-qt-common/images.cpp:188
+#: kde-qt-common/images.cpp:216
+msgid "&Label:"
+msgstr "&Etikette:"
+
+#: kde-qt-common/images.cpp:63 kde-qt-common/images.cpp:188
+msgid "Enter the label (name) of the kernel you want to boot here."
+msgstr "Indtast her etiketten (navnet) på den kerne du vil boote."
+
+#: kde-qt-common/images.cpp:65 kde-qt-common/images.cpp:189
+msgid "&Root filesystem:"
+msgstr "&Root-filsystem:"
+
+#: kde-qt-common/images.cpp:66 kde-qt-common/images.cpp:189
+msgid ""
+"Enter the root filesystem (i.e. the partition that will be mounted as / at boot "
+"time) for the kernel you want to boot here."
+msgstr ""
+"Indtast her det root-filsystem (altså den partition som vil blive monteret som "
+"/ på boot-tidspunktet) for den kerne som du ønsker at boote."
+
+#: kde-qt-common/images.cpp:68 kde-qt-common/images.cpp:190
+msgid "&Initial ramdisk:"
+msgstr "&Initial ramdisk:"
+
+#: kde-qt-common/images.cpp:69 kde-qt-common/images.cpp:190
+msgid ""
+"If you want to use an initial ramdisk (initrd) for this kernel, enter its "
+"filename here. Leave this field blank if you don't intend to use an initial "
+"ramdisk for this kernel."
+msgstr ""
+"Hvis du ønsker at bruge en initial ramdisk (initrd) for denne kerne, så indtast "
+"dens filnavn her. Lad det være blankt hvis du ikke ønsker at bruge en initial "
+"ramdisk for denne kerne."
+
+#: kde-qt-common/images.cpp:71
+msgid "E&xtra parameters:"
+msgstr "E&kstra parametre:"
+
+#: kde-qt-common/images.cpp:72
+msgid ""
+"Enter any extra parameters you wish to pass to the kernel here. Usually, this "
+"can be left blank."
+"<br>This sets the <i>append</i> option in lilo.conf."
+msgstr ""
+"Indtast her ekstra parametre som du ønsker at give til kernen. Sædvanligvis kan "
+"dette efterlades blankt."
+"<br>Dette sætter <i>append</i>-indstillingen i lilo.conf."
+
+#: kde-qt-common/images.cpp:79
+msgid "Set &Default"
+msgstr "Sæt &standard"
+
+#: kde-qt-common/images.cpp:80
+msgid "Boot this kernel/OS if the user doesn't make a different choice"
+msgstr "Boot denne kerne/dette OS hvis brugeren ikke foretager et andet valg."
+
+#: kde-qt-common/images.cpp:82
+msgid "De&tails"
+msgstr "De&taljer"
+
+#: kde-qt-common/images.cpp:83
+msgid ""
+"This button brings up a dialog box with further, less commonly used, options."
+msgstr ""
+"Denne knap får en dialog frem med yderligere (sjældnere brugte) indstillinger."
+
+#: kde-qt-common/images.cpp:85
+msgid "&Probe"
+msgstr "&Undersøg"
+
+#: kde-qt-common/images.cpp:87
+msgid ""
+"Automatically generate a (hopefully) reasonable lilo.conf for your system"
+msgstr "Generér automatisk en (forhåbentlig) brugbar lilo.conf for dit system"
+
+#: kde-qt-common/images.cpp:88
+msgid "&Check Configuration"
+msgstr "&Tjek indstilling"
+
+#: kde-qt-common/images.cpp:90
+msgid "Run LILO in test mode to see if the configuration is ok"
+msgstr "Kør LILO i test-tilstand for at se om indstillingen er o.k."
+
+#: kde-qt-common/images.cpp:91
+msgid "Add &Kernel..."
+msgstr "Tilføj &kerne..."
+
+#: kde-qt-common/images.cpp:93
+msgid "Add a new Linux kernel to the boot menu"
+msgstr "Tilføj en ny Linux-kerne til bootmenuen"
+
+#: kde-qt-common/images.cpp:94
+msgid "Add Other &OS..."
+msgstr "Tilføj et andet &OS..."
+
+#: kde-qt-common/images.cpp:96
+msgid "Add a non-Linux OS to the boot menu"
+msgstr "Tilføj et ikke-Linux-OS til bootmenuen"
+
+#: kde-qt-common/images.cpp:97
+msgid "&Remove Entry"
+msgstr "&Fjern indgang"
+
+#: kde-qt-common/images.cpp:99
+msgid "Remove entry from the boot menu"
+msgstr "Fjern indgang fra bootmenuen"
+
+#: kde-qt-common/images.cpp:177
+msgid ""
+"Configuration ok. LILO said:\n"
+msgstr ""
+"Indstilling o.k. LILO sagde:\n"
+
+#: kde-qt-common/images.cpp:178
+msgid "Configuration OK"
+msgstr "Indstilling o.k."
+
+#: kde-qt-common/images.cpp:180
+msgid ""
+"Configuration NOT ok. LILO said:\n"
+msgstr ""
+"Indstilling ikke o.k. LILO sagde:\n"
+
+#: kde-qt-common/images.cpp:181
+msgid "Configuration NOT ok"
+msgstr "Indstilling IKKE o.k."
+
+#: kde-qt-common/images.cpp:187
+msgid "&Kernel filename:"
+msgstr "&Kernefilnavn:"
+
+#: kde-qt-common/images.cpp:215
+msgid "Boot from dis&k:"
+msgstr "Boot fra dis&k:"
+
+#: kde-qt-common/images.cpp:215
+msgid ""
+"Enter the partition containing the operating system you'd like to boot here."
+msgstr ""
+"Indtast her den partition som indeholder det operativsystem du gerne vil boote."
+
+#: kde-qt-common/images.cpp:216
+msgid "Enter the label (name) of the operating system here."
+msgstr "Indtast her etiketten (navnet) på operativsystemet."
+
+#: kde-qt-common/images.cpp:297
+msgid "Dis&k:"
+msgstr "Dis&k:"
+
+#: kde-qt-common/mainwidget.cpp:43
+msgid "&General Options"
+msgstr "&Generelle indstillinger"
+
+#: kde-qt-common/mainwidget.cpp:44
+msgid "&Operating Systems"
+msgstr "&Operativsystemer"
+
+#: kde-qt-common/mainwidget.cpp:45 kde-qt-common/mainwidget.cpp:65
+#: kde-qt-common/mainwidget.cpp:94 kde-qt-common/mainwidget.cpp:100
+msgid "&Expert"
+msgstr "&Ekspert"
+
+#: kde-qt-common/mainwidget.cpp:96 kde-qt-common/mainwidget.cpp:104
+msgid "&General options"
+msgstr "&Generelle indstillinger"
+
+#: kde-qt-common/mainwidget.cpp:98 kde-qt-common/mainwidget.cpp:102
+msgid "&Operating systems"
+msgstr "&Operativsystemer"
+
+#: kde/Details.cpp:44 qt/Details.cpp:44
+msgid "&Graphics mode on text console:"
+msgstr "&Grafisk tilstand på tekstkonsol:"
+
+#: kde/Details.cpp:47 qt/Details.cpp:47
+msgid ""
+"You can select the graphics mode for this kernel here."
+"<br>If you intend to use a VGA graphics mode, you must compile the kernel with "
+"support for framebuffer devices. The <i>ask</i> setting brings up a prompt at "
+"boot time."
+msgstr ""
+"Her kan du vælge den grafiske tilstand for denne kerne."
+"<br>Hvis du vil bruge en VGA-grafiktilstand, skal du oversætte kernen med "
+"understøttelse af rammebuffer-enheder. <i>Spørg</i>-indstillingen bringer et "
+"spørgsmål frem ved boot-tid."
+
+#: kde/Details.cpp:75 qt/Details.cpp:76
+msgid "Mount root filesystem &read-only"
+msgstr "Montér root-filsystem som &læs-kun"
+
+#: kde/Details.cpp:76 qt/Details.cpp:77
+msgid ""
+"Mount the root filesystem for this kernel read-only. Since the init scripts "
+"normally take care of remounting the root filesystem in read-write mode after "
+"running some checks, this should always be turned on."
+"<br>Don't turn this off unless you know what you're doing."
+msgstr ""
+"Montér root-filsystemet for denne kerne så det kun kan læses. Da det normalt er "
+"init-scripterne der sørger for at genmontere root-filsystemet i "
+"læse-skrive-tilstand efter at have kørt nogle tjek, skal dette altid være slået "
+"til."
+"<br>Slå det ikke fra medmindre du ved hvad du foretager dig."
+
+#: kde/Details.cpp:78 qt/Details.cpp:80
+msgid "Do not check &partition table"
+msgstr "Tjek ikke &partitionstabellen"
+
+#: kde/Details.cpp:79
+msgid ""
+"This turns off some sanity checks while writing the configuration. This should "
+"not be used under \"normal\" circumstances, but it can be useful, for example, "
+"by providing the capability of booting from a floppy disk, without having a "
+"floppy in the drive every time you run lilo."
+"<br>This sets the <i>unsafe</i> keyword in lilo.conf."
+msgstr ""
+"Dette slår nogle sundhedstjek fra mens indstillingen skrives. Dette bør ikke "
+"bruges under \"normale\" omstændigheder, men det kan være nyttigt, f.eks. for "
+"at installere muligheden for at kunne boote fra en diskette uden at have en "
+"diskette i drevet hver gang du kører LILO. Dette sætter <i>unsafe</i>"
+"-nøgleordet i lilo.conf."
+
+#: kde/Details.cpp:83 qt/Details.cpp:86
+msgid ""
+"Checking this box enables automatic recording of boot command lines as the "
+"default for the following bootups. This way, lilo \"locks\" on a choice until "
+"it is manually overridden."
+"<br>This sets the <b>lock</b> option in lilo.conf"
+msgstr ""
+"Ved at afkrydse dette felt, aktiveres automatisk optagelse af "
+"bootkommandolinjer for efterfølgende boots. På denne måde \"låses\" LILO på et "
+"valg indtil det ændres manuelt."
+"<br>Dette sætter <b>lock</b>-indstillingen i lilo.conf."
+
+#: kde/Details.cpp:86 qt/Details.cpp:89
+msgid ""
+"If this box is checked, a password (entered below) is required only if any "
+"parameters are changed (i.e. the user can boot <i>linux</i>, but not <i>"
+"linux single</i> or <i>linux init=/bin/sh</i>).\n"
+"This sets the <b>restricted</b> option in lilo.conf."
+msgstr ""
+"Hvis dette felt er afkrydset, kræves kodeord (indtastet nedenfor) kun hvis "
+"parametre ændres (dvs. en bruger kan boote <i>linux</i>, men ikke <i>"
+"linux single</i> eller <i>linux init=/bin/sh</i>).\n"
+"Dette sætter <b>restricted</b>-indstillingen i lilo.conf."
+
+#: kde/Details.cpp:94 qt/Details.cpp:98
+msgid ""
+"Enter the password required for bootup (if any) here. If <i>restricted</i> "
+"above is checked, the password is required for additional parameters only."
+"<br><b>WARNING:</b> The password is stored in clear text in /etc/lilo.conf. "
+"You'll want to make sure nobody untrusted can read this file. Also, you "
+"probably don't want to use your normal/root password here."
+msgstr ""
+"Indtast her det kodeord som kræves for boot (hvis noget). Hvis 'begrænset' "
+"ovenfor er afkrydset, kræves der kun kodeord for ekstra parametre."
+"<br><b>ADVARSEL:</b> Kodeordet gemmes i klar tekst i /etc/lilo.conf. Du skal "
+"sørge for at folk du ikke stoler på ikke kan læse denne fil. Du skal nok heller "
+"ikke bruge dit sædvanlige kodeord eller root-kodeordet her."
+
+#: kde/kcontrol.cpp:48
+msgid "kcmlilo"
+msgstr "kcmlilo"
+
+#: kde/kcontrol.cpp:48
+msgid "LILO Configuration"
+msgstr "LILO-indstilling"
+
+#: kde/kcontrol.cpp:50
+msgid "(c) 2000, Bernhard Rosenkraenzer"
+msgstr "(c) 2000 Bernhard Rosenkraenzer"
+
+#: qt/Details.cpp:81
+msgid ""
+"This turns off some sanity checks while writing the configuration. This "
+"shouldn't be used under \"normal\" circumstances, but it's useful, for example, "
+"for installing the possibility to boot from a floppy disk without having a "
+"floppy in the drive every time you run lilo."
+"<br>This sets the <i>unsafe</i> keyword in lilo.conf."
+msgstr ""
+"Dette slår nogle sundhedstjek fra mens indstillingen skrives. Dette bør ikke "
+"bruges under \"normale\" omstændigheder, men det kan være nyttigt, f.eks. for "
+"at installere muligheden for at kunne boote fra en diskette uden at have en "
+"diskette i drevet hver gang du kører LILO. Dette sætter <i>unsafe</i>"
+"-nøgleordet i lilo.conf."
+
+#: qt/standalone.cpp:41
+msgid "&What's This?"
+msgstr "&Hvad er dette?"
+
+#: qt/standalone.cpp:43
+msgid ""
+"The <i>What's This?</i> button is part of this program's help system. Click on "
+"the What's This? button then on any widget in the window to get information "
+"(like this) on it."
+msgstr ""
+"<i>Hvad er dette?</i>-knappen er en del af dette programs hjælpesystem. Klik på "
+"denne knap og derefter på en vilkårlig kontrol i vinduet for at få information "
+"(som denne) om den."
+
+#: qt/standalone.cpp:47
+msgid ""
+"This button calls up the program's online help system. If it does nothing, no "
+"help file has been written (yet); in that case, use the <i>What's This</i> "
+"button on the left."
+msgstr ""
+"Denne knap fremkalder programmets online-hjælpesystem. Hvis den ingenting gør, "
+"er hjælpefilen ikke skrevet (endnu); brug i dette tilfælde 'Hvad er "
+"dette?'-knappen til venstre."
+
+#: qt/standalone.cpp:49
+msgid "&Default"
+msgstr "&Standard"
+
+#: qt/standalone.cpp:50
+msgid ""
+"This button resets all parameters to some (hopefully sane) default values."
+msgstr ""
+"Denne knap nulstiller alle parametre til (forhåbentlig fornuftige) "
+"standardværdier."
+
+#: qt/standalone.cpp:52
+msgid "&Reset"
+msgstr "&Nulstil"
+
+#: qt/standalone.cpp:53
+msgid ""
+"This button resets all parameters to what they were before you started the "
+"program."
+msgstr ""
+"Denne knap stiller alle parametre tilbage til det de var før du startede "
+"programmet."
+
+#: qt/standalone.cpp:56
+msgid "This button saves all your changes without exiting."
+msgstr "Denne knap gemmer alle dine ændringer uden at afslutte."
+
+#: qt/standalone.cpp:59
+msgid "This button saves all your changes and exits the program."
+msgstr "Denne knap gemmer alle dine ændringer og afslutter programmet."
+
+#: qt/standalone.cpp:62
+msgid "This button exits the program without saving your changes."
+msgstr "Denne knap afslutter programmet uden at gemme dine ændringer."
+
+#: _translatorinfo.cpp:1
+msgid ""
+"_: NAME OF TRANSLATORS\n"
+"Your names"
+msgstr "Erik Kjær Pedersen"
+
+#: _translatorinfo.cpp:3
+msgid ""
+"_: EMAIL OF TRANSLATORS\n"
+"Your emails"
+msgstr "erik@binghamton.edu"