diff options
Diffstat (limited to 'tde-i18n-ru/docs/tdeaddons')
34 files changed, 7026 insertions, 0 deletions
diff --git a/tde-i18n-ru/docs/tdeaddons/Makefile.am b/tde-i18n-ru/docs/tdeaddons/Makefile.am new file mode 100644 index 00000000000..e8ff7c7b1b8 --- /dev/null +++ b/tde-i18n-ru/docs/tdeaddons/Makefile.am @@ -0,0 +1,4 @@ +KDE_LANG = ru +SUBDIRS = $(AUTODIRS) +KDE_DOCS = AUTO +KDE_MANS = AUTO diff --git a/tde-i18n-ru/docs/tdeaddons/Makefile.in b/tde-i18n-ru/docs/tdeaddons/Makefile.in new file mode 100644 index 00000000000..85f958175fc --- /dev/null +++ b/tde-i18n-ru/docs/tdeaddons/Makefile.in @@ -0,0 +1,587 @@ +# Makefile.in generated by automake 1.10.1 from Makefile.am. +# KDE tags expanded automatically by am_edit - $Revision: 483858 $ +# @configure_input@ + +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ +VPATH = @srcdir@ +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +subdir = docs/tdeaddons +DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ + $(top_srcdir)/configure.in +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +CONFIG_HEADER = $(top_builddir)/config.h +CONFIG_CLEAN_FILES = +SOURCES = +DIST_SOURCES = +#>- RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ +#>- html-recursive info-recursive install-data-recursive \ +#>- install-dvi-recursive install-exec-recursive \ +#>- install-html-recursive install-info-recursive \ +#>- install-pdf-recursive install-ps-recursive install-recursive \ +#>- installcheck-recursive installdirs-recursive pdf-recursive \ +#>- ps-recursive uninstall-recursive +#>+ 7 +RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ + html-recursive info-recursive install-data-recursive \ + install-dvi-recursive install-exec-recursive \ + install-html-recursive install-info-recursive \ + install-pdf-recursive install-ps-recursive install-recursive \ + installcheck-recursive installdirs-recursive pdf-recursive \ + ps-recursive uninstall-recursive nmcheck-recursive bcheck-recursive +RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ + distclean-recursive maintainer-clean-recursive +ETAGS = etags +CTAGS = ctags +DIST_SUBDIRS = $(SUBDIRS) +#>- DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +#>+ 1 +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) $(KDE_DIST) +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +ARTSCCONFIG = @ARTSCCONFIG@ +AUTOCONF = @AUTOCONF@ +AUTODIRS = @AUTODIRS@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CONF_FILES = @CONF_FILES@ +CYGPATH_W = @CYGPATH_W@ +DCOPIDL = @DCOPIDL@ +DCOPIDL2CPP = @DCOPIDL2CPP@ +DCOPIDLNG = @DCOPIDLNG@ +DCOP_DEPENDENCIES = @DCOP_DEPENDENCIES@ +DEFS = @DEFS@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +GMSGFMT = @GMSGFMT@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +KCFG_DEPENDENCIES = @KCFG_DEPENDENCIES@ +KCONFIG_COMPILER = @KCONFIG_COMPILER@ +KDECONFIG = @KDECONFIG@ +KDE_EXTRA_RPATH = @KDE_EXTRA_RPATH@ +KDE_RPATH = @KDE_RPATH@ +KDE_XSL_STYLESHEET = @KDE_XSL_STYLESHEET@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LN_S = @LN_S@ +LTLIBOBJS = @LTLIBOBJS@ +MAKEINFO = @MAKEINFO@ +MAKEKDEWIDGETS = @MAKEKDEWIDGETS@ +MCOPIDL = @MCOPIDL@ +MEINPROC = @MEINPROC@ +MKDIR_P = @MKDIR_P@ +MSGFMT = @MSGFMT@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +TOPSUBDIRS = @TOPSUBDIRS@ +VERSION = @VERSION@ +XGETTEXT = @XGETTEXT@ +XMLLINT = @XMLLINT@ +X_RPATH = @X_RPATH@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +am__leading_dot = @am__leading_dot@ +am__tar = @am__tar@ +am__untar = @am__untar@ +#>- bindir = @bindir@ +#>+ 2 +DEPDIR = .deps +bindir = @bindir@ +build_alias = @build_alias@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host_alias = @host_alias@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +kde_appsdir = @kde_appsdir@ +kde_bindir = @kde_bindir@ +kde_confdir = @kde_confdir@ +kde_datadir = @kde_datadir@ +kde_htmldir = @kde_htmldir@ +kde_icondir = @kde_icondir@ +kde_kcfgdir = @kde_kcfgdir@ +kde_libs_htmldir = @kde_libs_htmldir@ +kde_libs_prefix = @kde_libs_prefix@ +kde_locale = @kde_locale@ +kde_mimedir = @kde_mimedir@ +kde_moduledir = @kde_moduledir@ +kde_servicesdir = @kde_servicesdir@ +kde_servicetypesdir = @kde_servicetypesdir@ +kde_sounddir = @kde_sounddir@ +kde_styledir = @kde_styledir@ +kde_templatesdir = @kde_templatesdir@ +kde_wallpaperdir = @kde_wallpaperdir@ +kde_widgetdir = @kde_widgetdir@ +tdeinitdir = @tdeinitdir@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +xdg_appsdir = @xdg_appsdir@ +xdg_directorydir = @xdg_directorydir@ +xdg_menudir = @xdg_menudir@ +KDE_LANG = ru +#>- SUBDIRS = $(AUTODIRS) +#>+ 1 +SUBDIRS =. kicker-applets konq-plugins kate-plugins +KDE_DOCS = AUTO +KDE_MANS = AUTO +#>- all: all-recursive +#>+ 1 +all: docs-am all-recursive + +.SUFFIXES: +$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) +#>- @for dep in $?; do \ +#>- case '$(am__configure_deps)' in \ +#>- *$$dep*) \ +#>- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ +#>- && exit 0; \ +#>- exit 1;; \ +#>- esac; \ +#>- done; \ +#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/tdeaddons/Makefile'; \ +#>- cd $(top_srcdir) && \ +#>- $(AUTOMAKE) --gnu docs/tdeaddons/Makefile +#>+ 12 + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/tdeaddons/Makefile'; \ + cd $(top_srcdir) && \ + $(AUTOMAKE) --gnu docs/tdeaddons/Makefile + cd $(top_srcdir) && perl ../scripts/admin/am_edit -p../scripts/admin docs/tdeaddons/Makefile.in +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +# This directory's subdirectories are mostly independent; you can cd +# into them and run `make' without going through this Makefile. +# To change the values of `make' variables: instead of editing Makefiles, +# (1) if the variable is set in `config.status', edit `config.status' +# (which will cause the Makefiles to be regenerated when you run `make'); +# (2) otherwise, pass the desired values on the `make' command line. +$(RECURSIVE_TARGETS): + @failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ + *=* | --[!k]*);; \ + *k*) failcom='fail=yes';; \ + esac; \ + done; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + dot_seen=yes; \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +$(RECURSIVE_CLEAN_TARGETS): + @failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ + *=* | --[!k]*);; \ + *k*) failcom='fail=yes';; \ + esac; \ + done; \ + dot_seen=no; \ + case "$@" in \ + distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ + *) list='$(SUBDIRS)' ;; \ + esac; \ + rev=''; for subdir in $$list; do \ + if test "$$subdir" = "."; then :; else \ + rev="$$subdir $$rev"; \ + fi; \ + done; \ + rev="$$rev ."; \ + target=`echo $@ | sed s/-recursive//`; \ + for subdir in $$rev; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done && test -z "$$fail" +tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + done +ctags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + done + +ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + mkid -fID $$unique +tags: TAGS + +TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ + if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ + empty_fix=.; \ + else \ + include_option=--include; \ + empty_fix=; \ + fi; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test ! -f $$subdir/TAGS || \ + tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$tags $$unique; \ + fi +ctags: CTAGS +CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + test -z "$(CTAGS_ARGS)$$tags$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$tags $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && cd $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) $$here + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + +distdir: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ + cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ + || cp -p $$d/$$file $(distdir)/$$file \ + || exit 1; \ + fi; \ + done + list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -d "$(distdir)/$$subdir" \ + || $(MKDIR_P) "$(distdir)/$$subdir" \ + || exit 1; \ + distdir=`$(am__cd) $(distdir) && pwd`; \ + top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ + (cd $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$$top_distdir" \ + distdir="$$distdir/$$subdir" \ + am__remove_distdir=: \ + am__skip_length_check=: \ + distdir) \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-recursive +all-am: Makefile +installdirs: installdirs-recursive +installdirs-am: +install: install-recursive +install-exec: install-exec-recursive +install-data: install-data-recursive +uninstall: uninstall-recursive + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-recursive +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +#>- clean: clean-recursive +#>+ 1 +clean: kde-rpo-clean clean-recursive + +#>- clean-am: clean-generic mostlyclean-am +#>+ 1 +clean-am: clean-bcheck clean-generic mostlyclean-am + +distclean: distclean-recursive + -rm -f Makefile +distclean-am: clean-am distclean-generic distclean-tags + +dvi: dvi-recursive + +dvi-am: + +html: html-recursive + +info: info-recursive + +info-am: + +install-data-am: + +install-dvi: install-dvi-recursive + +install-exec-am: + +install-html: install-html-recursive + +install-info: install-info-recursive + +install-man: + +install-pdf: install-pdf-recursive + +install-ps: install-ps-recursive + +installcheck-am: + +maintainer-clean: maintainer-clean-recursive + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-recursive + +mostlyclean-am: mostlyclean-generic + +pdf: pdf-recursive + +pdf-am: + +ps: ps-recursive + +ps-am: + +uninstall-am: + +.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ + install-strip + +.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ + all all-am check check-am clean clean-generic ctags \ + ctags-recursive distclean distclean-generic distclean-tags \ + distdir dvi dvi-am html html-am info info-am install \ + install-am install-data install-data-am install-dvi \ + install-dvi-am install-exec install-exec-am install-html \ + install-html-am install-info install-info-am install-man \ + install-pdf install-pdf-am install-ps install-ps-am \ + install-strip installcheck installcheck-am installdirs \ + installdirs-am maintainer-clean maintainer-clean-generic \ + mostlyclean mostlyclean-generic pdf pdf-am ps ps-am tags \ + tags-recursive uninstall uninstall-am + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: + +#>+ 2 +KDE_DIST=Makefile.in Makefile.am + +#>+ 2 +docs-am: + +#>+ 15 +force-reedit: + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/tdeaddons/Makefile'; \ + cd $(top_srcdir) && \ + $(AUTOMAKE) --gnu docs/tdeaddons/Makefile + cd $(top_srcdir) && perl ../scripts/admin/am_edit -p../scripts/admin docs/tdeaddons/Makefile.in + + +#>+ 21 +clean-bcheck: + rm -f *.bchecktest.cc *.bchecktest.cc.class a.out + +bcheck: bcheck-recursive + +bcheck-am: + @for i in ; do \ + if test $(srcdir)/$$i -nt $$i.bchecktest.cc; then \ + echo "int main() {return 0;}" > $$i.bchecktest.cc ; \ + echo "#include \"$$i\"" >> $$i.bchecktest.cc ; \ + echo "$$i"; \ + if ! $(CXX) $(DEFS) -I. -I$(srcdir) -I$(top_builddir) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(CXXFLAGS) $(KDE_CXXFLAGS) --dump-class-hierarchy -c $$i.bchecktest.cc; then \ + rm -f $$i.bchecktest.cc; exit 1; \ + fi ; \ + echo "" >> $$i.bchecktest.cc.class; \ + perl $(top_srcdir)/admin/bcheck.pl $$i.bchecktest.cc.class || { rm -f $$i.bchecktest.cc; exit 1; }; \ + rm -f a.out; \ + fi ; \ + done + + +#>+ 3 +final: + $(MAKE) all-am + +#>+ 3 +final-install: + $(MAKE) install-am + +#>+ 3 +no-final: + $(MAKE) all-am + +#>+ 3 +no-final-install: + $(MAKE) install-am + +#>+ 3 +kde-rpo-clean: + -rm -f *.rpo + +#>+ 3 +nmcheck: +nmcheck-am: nmcheck diff --git a/tde-i18n-ru/docs/tdeaddons/kate-plugins/Makefile.am b/tde-i18n-ru/docs/tdeaddons/kate-plugins/Makefile.am new file mode 100644 index 00000000000..e8ff7c7b1b8 --- /dev/null +++ b/tde-i18n-ru/docs/tdeaddons/kate-plugins/Makefile.am @@ -0,0 +1,4 @@ +KDE_LANG = ru +SUBDIRS = $(AUTODIRS) +KDE_DOCS = AUTO +KDE_MANS = AUTO diff --git a/tde-i18n-ru/docs/tdeaddons/kate-plugins/Makefile.in b/tde-i18n-ru/docs/tdeaddons/kate-plugins/Makefile.in new file mode 100644 index 00000000000..072348ba6f7 --- /dev/null +++ b/tde-i18n-ru/docs/tdeaddons/kate-plugins/Makefile.in @@ -0,0 +1,613 @@ +# Makefile.in generated by automake 1.10.1 from Makefile.am. +# KDE tags expanded automatically by am_edit - $Revision: 483858 $ +# @configure_input@ + +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ +VPATH = @srcdir@ +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +subdir = docs/tdeaddons/kate-plugins +DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ + $(top_srcdir)/configure.in +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +CONFIG_HEADER = $(top_builddir)/config.h +CONFIG_CLEAN_FILES = +SOURCES = +DIST_SOURCES = +#>- RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ +#>- html-recursive info-recursive install-data-recursive \ +#>- install-dvi-recursive install-exec-recursive \ +#>- install-html-recursive install-info-recursive \ +#>- install-pdf-recursive install-ps-recursive install-recursive \ +#>- installcheck-recursive installdirs-recursive pdf-recursive \ +#>- ps-recursive uninstall-recursive +#>+ 7 +RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ + html-recursive info-recursive install-data-recursive \ + install-dvi-recursive install-exec-recursive \ + install-html-recursive install-info-recursive \ + install-pdf-recursive install-ps-recursive install-recursive \ + installcheck-recursive installdirs-recursive pdf-recursive \ + ps-recursive uninstall-recursive nmcheck-recursive bcheck-recursive +RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ + distclean-recursive maintainer-clean-recursive +ETAGS = etags +CTAGS = ctags +DIST_SUBDIRS = $(SUBDIRS) +#>- DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +#>+ 1 +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) $(KDE_DIST) +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +ARTSCCONFIG = @ARTSCCONFIG@ +AUTOCONF = @AUTOCONF@ +AUTODIRS = @AUTODIRS@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CONF_FILES = @CONF_FILES@ +CYGPATH_W = @CYGPATH_W@ +DCOPIDL = @DCOPIDL@ +DCOPIDL2CPP = @DCOPIDL2CPP@ +DCOPIDLNG = @DCOPIDLNG@ +DCOP_DEPENDENCIES = @DCOP_DEPENDENCIES@ +DEFS = @DEFS@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +GMSGFMT = @GMSGFMT@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +KCFG_DEPENDENCIES = @KCFG_DEPENDENCIES@ +KCONFIG_COMPILER = @KCONFIG_COMPILER@ +KDECONFIG = @KDECONFIG@ +KDE_EXTRA_RPATH = @KDE_EXTRA_RPATH@ +KDE_RPATH = @KDE_RPATH@ +KDE_XSL_STYLESHEET = @KDE_XSL_STYLESHEET@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LN_S = @LN_S@ +LTLIBOBJS = @LTLIBOBJS@ +MAKEINFO = @MAKEINFO@ +MAKEKDEWIDGETS = @MAKEKDEWIDGETS@ +MCOPIDL = @MCOPIDL@ +MEINPROC = @MEINPROC@ +MKDIR_P = @MKDIR_P@ +MSGFMT = @MSGFMT@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +TOPSUBDIRS = @TOPSUBDIRS@ +VERSION = @VERSION@ +XGETTEXT = @XGETTEXT@ +XMLLINT = @XMLLINT@ +X_RPATH = @X_RPATH@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +am__leading_dot = @am__leading_dot@ +am__tar = @am__tar@ +am__untar = @am__untar@ +#>- bindir = @bindir@ +#>+ 2 +DEPDIR = .deps +bindir = @bindir@ +build_alias = @build_alias@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host_alias = @host_alias@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +kde_appsdir = @kde_appsdir@ +kde_bindir = @kde_bindir@ +kde_confdir = @kde_confdir@ +kde_datadir = @kde_datadir@ +kde_htmldir = @kde_htmldir@ +kde_icondir = @kde_icondir@ +kde_kcfgdir = @kde_kcfgdir@ +kde_libs_htmldir = @kde_libs_htmldir@ +kde_libs_prefix = @kde_libs_prefix@ +kde_locale = @kde_locale@ +kde_mimedir = @kde_mimedir@ +kde_moduledir = @kde_moduledir@ +kde_servicesdir = @kde_servicesdir@ +kde_servicetypesdir = @kde_servicetypesdir@ +kde_sounddir = @kde_sounddir@ +kde_styledir = @kde_styledir@ +kde_templatesdir = @kde_templatesdir@ +kde_wallpaperdir = @kde_wallpaperdir@ +kde_widgetdir = @kde_widgetdir@ +tdeinitdir = @tdeinitdir@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +xdg_appsdir = @xdg_appsdir@ +xdg_directorydir = @xdg_directorydir@ +xdg_menudir = @xdg_menudir@ +KDE_LANG = ru +#>- SUBDIRS = $(AUTODIRS) +#>+ 1 +SUBDIRS =. +KDE_DOCS = AUTO +KDE_MANS = AUTO +#>- all: all-recursive +#>+ 1 +all: docs-am all-recursive + +.SUFFIXES: +$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) +#>- @for dep in $?; do \ +#>- case '$(am__configure_deps)' in \ +#>- *$$dep*) \ +#>- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ +#>- && exit 0; \ +#>- exit 1;; \ +#>- esac; \ +#>- done; \ +#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/tdeaddons/kate-plugins/Makefile'; \ +#>- cd $(top_srcdir) && \ +#>- $(AUTOMAKE) --gnu docs/tdeaddons/kate-plugins/Makefile +#>+ 12 + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/tdeaddons/kate-plugins/Makefile'; \ + cd $(top_srcdir) && \ + $(AUTOMAKE) --gnu docs/tdeaddons/kate-plugins/Makefile + cd $(top_srcdir) && perl ../scripts/admin/am_edit -p../scripts/admin docs/tdeaddons/kate-plugins/Makefile.in +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +# This directory's subdirectories are mostly independent; you can cd +# into them and run `make' without going through this Makefile. +# To change the values of `make' variables: instead of editing Makefiles, +# (1) if the variable is set in `config.status', edit `config.status' +# (which will cause the Makefiles to be regenerated when you run `make'); +# (2) otherwise, pass the desired values on the `make' command line. +$(RECURSIVE_TARGETS): + @failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ + *=* | --[!k]*);; \ + *k*) failcom='fail=yes';; \ + esac; \ + done; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + dot_seen=yes; \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +$(RECURSIVE_CLEAN_TARGETS): + @failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ + *=* | --[!k]*);; \ + *k*) failcom='fail=yes';; \ + esac; \ + done; \ + dot_seen=no; \ + case "$@" in \ + distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ + *) list='$(SUBDIRS)' ;; \ + esac; \ + rev=''; for subdir in $$list; do \ + if test "$$subdir" = "."; then :; else \ + rev="$$subdir $$rev"; \ + fi; \ + done; \ + rev="$$rev ."; \ + target=`echo $@ | sed s/-recursive//`; \ + for subdir in $$rev; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done && test -z "$$fail" +tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + done +ctags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + done + +ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + mkid -fID $$unique +tags: TAGS + +TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ + if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ + empty_fix=.; \ + else \ + include_option=--include; \ + empty_fix=; \ + fi; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test ! -f $$subdir/TAGS || \ + tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$tags $$unique; \ + fi +ctags: CTAGS +CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + test -z "$(CTAGS_ARGS)$$tags$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$tags $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && cd $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) $$here + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + +#>- distdir: $(DISTFILES) +#>+ 1 +distdir: distdir-nls $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ + cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ + || cp -p $$d/$$file $(distdir)/$$file \ + || exit 1; \ + fi; \ + done + list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -d "$(distdir)/$$subdir" \ + || $(MKDIR_P) "$(distdir)/$$subdir" \ + || exit 1; \ + distdir=`$(am__cd) $(distdir) && pwd`; \ + top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ + (cd $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$$top_distdir" \ + distdir="$$distdir/$$subdir" \ + am__remove_distdir=: \ + am__skip_length_check=: \ + distdir) \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-recursive +all-am: Makefile +installdirs: installdirs-recursive +installdirs-am: +install: install-recursive +install-exec: install-exec-recursive +install-data: install-data-recursive +#>- uninstall: uninstall-recursive +#>+ 1 +uninstall: uninstall-nls uninstall-recursive + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-recursive +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +#>- clean: clean-recursive +#>+ 1 +clean: kde-rpo-clean clean-recursive + +#>- clean-am: clean-generic mostlyclean-am +#>+ 1 +clean-am: clean-bcheck clean-generic mostlyclean-am + +distclean: distclean-recursive + -rm -f Makefile +distclean-am: clean-am distclean-generic distclean-tags + +dvi: dvi-recursive + +dvi-am: + +html: html-recursive + +info: info-recursive + +info-am: + +#>- install-data-am: +#>+ 1 +install-data-am: install-nls + +install-dvi: install-dvi-recursive + +install-exec-am: + +install-html: install-html-recursive + +install-info: install-info-recursive + +install-man: + +install-pdf: install-pdf-recursive + +install-ps: install-ps-recursive + +installcheck-am: + +maintainer-clean: maintainer-clean-recursive + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-recursive + +mostlyclean-am: mostlyclean-generic + +pdf: pdf-recursive + +pdf-am: + +ps: ps-recursive + +ps-am: + +uninstall-am: + +.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ + install-strip + +.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ + all all-am check check-am clean clean-generic ctags \ + ctags-recursive distclean distclean-generic distclean-tags \ + distdir dvi dvi-am html html-am info info-am install \ + install-am install-data install-data-am install-dvi \ + install-dvi-am install-exec install-exec-am install-html \ + install-html-am install-info install-info-am install-man \ + install-pdf install-pdf-am install-ps install-ps-am \ + install-strip installcheck installcheck-am installdirs \ + installdirs-am maintainer-clean maintainer-clean-generic \ + mostlyclean mostlyclean-generic pdf pdf-am ps ps-am tags \ + tags-recursive uninstall uninstall-am + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: + +#>+ 2 +KDE_DIST=openheader.docbook Makefile.in textfilter.docbook Makefile.am + +#>+ 2 +docs-am: textfilter.docbook openheader.docbook + +#>+ 13 +install-nls: + $(mkinstalldirs) $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kate-plugins + @for base in textfilter.docbook openheader.docbook ; do \ + echo $(INSTALL_DATA) $$base $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kate-plugins/$$base ;\ + $(INSTALL_DATA) $(srcdir)/$$base $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kate-plugins/$$base ;\ + done + +uninstall-nls: + for base in textfilter.docbook openheader.docbook ; do \ + rm -f $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kate-plugins/$$base ;\ + done + + +#>+ 5 +distdir-nls: + for file in textfilter.docbook openheader.docbook ; do \ + cp $(srcdir)/$$file $(distdir); \ + done + +#>+ 15 +force-reedit: + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/tdeaddons/kate-plugins/Makefile'; \ + cd $(top_srcdir) && \ + $(AUTOMAKE) --gnu docs/tdeaddons/kate-plugins/Makefile + cd $(top_srcdir) && perl ../scripts/admin/am_edit -p../scripts/admin docs/tdeaddons/kate-plugins/Makefile.in + + +#>+ 21 +clean-bcheck: + rm -f *.bchecktest.cc *.bchecktest.cc.class a.out + +bcheck: bcheck-recursive + +bcheck-am: + @for i in ; do \ + if test $(srcdir)/$$i -nt $$i.bchecktest.cc; then \ + echo "int main() {return 0;}" > $$i.bchecktest.cc ; \ + echo "#include \"$$i\"" >> $$i.bchecktest.cc ; \ + echo "$$i"; \ + if ! $(CXX) $(DEFS) -I. -I$(srcdir) -I$(top_builddir) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(CXXFLAGS) $(KDE_CXXFLAGS) --dump-class-hierarchy -c $$i.bchecktest.cc; then \ + rm -f $$i.bchecktest.cc; exit 1; \ + fi ; \ + echo "" >> $$i.bchecktest.cc.class; \ + perl $(top_srcdir)/admin/bcheck.pl $$i.bchecktest.cc.class || { rm -f $$i.bchecktest.cc; exit 1; }; \ + rm -f a.out; \ + fi ; \ + done + + +#>+ 3 +final: + $(MAKE) all-am + +#>+ 3 +final-install: + $(MAKE) install-am + +#>+ 3 +no-final: + $(MAKE) all-am + +#>+ 3 +no-final-install: + $(MAKE) install-am + +#>+ 3 +kde-rpo-clean: + -rm -f *.rpo + +#>+ 3 +nmcheck: +nmcheck-am: nmcheck diff --git a/tde-i18n-ru/docs/tdeaddons/kate-plugins/openheader.docbook b/tde-i18n-ru/docs/tdeaddons/kate-plugins/openheader.docbook new file mode 100644 index 00000000000..8efc073a0fd --- /dev/null +++ b/tde-i18n-ru/docs/tdeaddons/kate-plugins/openheader.docbook @@ -0,0 +1,61 @@ +<chapter id="openheader"> +<chapterinfo> + +<title +>Открытие заголовка</title> + +<!-- +<authorgroup> +<author> +<firstname +> </firstname> +<surname +> </surname> +<affiliation> +<address +><email +> </email +></address> +</affiliation> +</author> +</authorgroup> +<date +>2001-05-15</date> +<releaseinfo +>1.00.00</releaseinfo> +<abstract> +<para> +Note about open header +</para> +</abstract> +--> +<keywordset> +<keyword +>KDE</keyword> +<keyword +>kate</keyword> +<keyword +>заголовок</keyword> +</keywordset> +</chapterinfo> + +<title +>Введение</title> + +<para +>Пока документация к модулю &kate; под названием <quote +>Открытие заголовка</quote +> еще не написана. Если вы заинтересованы в исправлении этой ситуации, свяжитесь с Лаури Уоттс <email +>lauri@kde.org</email +>, координатором команды по документированию &kde;. </para> + +</chapter> + +<!-- +Local Variables: +mode: sgml +sgml-omittag: nil +sgml-shorttag: t +End: +--> + diff --git a/tde-i18n-ru/docs/tdeaddons/kate-plugins/textfilter.docbook b/tde-i18n-ru/docs/tdeaddons/kate-plugins/textfilter.docbook new file mode 100644 index 00000000000..0f0937cd01a --- /dev/null +++ b/tde-i18n-ru/docs/tdeaddons/kate-plugins/textfilter.docbook @@ -0,0 +1,63 @@ +<chapter id="textfilter"> +<chapterinfo> + +<title +>Текстовый фильтр</title> + +<!-- +<authorgroup> +<author> +<firstname +> </firstname> +<surname +> </surname> +<affiliation> +<address +><email +> </email +></address> +</affiliation> +</author> +</authorgroup> +<date +>2001-05-15</date> +<releaseinfo +>1.00.00</releaseinfo> +<abstract> +<para> +Note about text filter plugin +</para> +</abstract> +--> +<keywordset> +<keyword +>KDE</keyword> +<keyword +>kate</keyword> +<keyword +>текст</keyword> +<keyword +>фильтр</keyword> +</keywordset> +</chapterinfo> + +<title +>Введение</title> + +<para +>Пока документация к модулю &kate; под названием <quote +>Текстовый фильтр</quote +> еще не написана. Если вы заинтересованы в исправлении этой ситуации, свяжитесь с Лаури Уоттс <email +>lauri@kde.org</email +>, координатором команды по документированию &kde;. </para> + +</chapter> + +<!-- +Local Variables: +mode: sgml +sgml-omittag: nil +sgml-shorttag: t +End: +--> + diff --git a/tde-i18n-ru/docs/tdeaddons/kicker-applets/Makefile.am b/tde-i18n-ru/docs/tdeaddons/kicker-applets/Makefile.am new file mode 100644 index 00000000000..e8ff7c7b1b8 --- /dev/null +++ b/tde-i18n-ru/docs/tdeaddons/kicker-applets/Makefile.am @@ -0,0 +1,4 @@ +KDE_LANG = ru +SUBDIRS = $(AUTODIRS) +KDE_DOCS = AUTO +KDE_MANS = AUTO diff --git a/tde-i18n-ru/docs/tdeaddons/kicker-applets/Makefile.in b/tde-i18n-ru/docs/tdeaddons/kicker-applets/Makefile.in new file mode 100644 index 00000000000..4e949e952f9 --- /dev/null +++ b/tde-i18n-ru/docs/tdeaddons/kicker-applets/Makefile.in @@ -0,0 +1,635 @@ +# Makefile.in generated by automake 1.10.1 from Makefile.am. +# KDE tags expanded automatically by am_edit - $Revision: 483858 $ +# @configure_input@ + +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ +VPATH = @srcdir@ +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +subdir = docs/tdeaddons/kicker-applets +DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ + $(top_srcdir)/configure.in +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +CONFIG_HEADER = $(top_builddir)/config.h +CONFIG_CLEAN_FILES = +SOURCES = +DIST_SOURCES = +#>- RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ +#>- html-recursive info-recursive install-data-recursive \ +#>- install-dvi-recursive install-exec-recursive \ +#>- install-html-recursive install-info-recursive \ +#>- install-pdf-recursive install-ps-recursive install-recursive \ +#>- installcheck-recursive installdirs-recursive pdf-recursive \ +#>- ps-recursive uninstall-recursive +#>+ 7 +RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ + html-recursive info-recursive install-data-recursive \ + install-dvi-recursive install-exec-recursive \ + install-html-recursive install-info-recursive \ + install-pdf-recursive install-ps-recursive install-recursive \ + installcheck-recursive installdirs-recursive pdf-recursive \ + ps-recursive uninstall-recursive nmcheck-recursive bcheck-recursive +RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ + distclean-recursive maintainer-clean-recursive +ETAGS = etags +CTAGS = ctags +DIST_SUBDIRS = $(SUBDIRS) +#>- DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +#>+ 1 +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) $(KDE_DIST) +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +ARTSCCONFIG = @ARTSCCONFIG@ +AUTOCONF = @AUTOCONF@ +AUTODIRS = @AUTODIRS@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CONF_FILES = @CONF_FILES@ +CYGPATH_W = @CYGPATH_W@ +DCOPIDL = @DCOPIDL@ +DCOPIDL2CPP = @DCOPIDL2CPP@ +DCOPIDLNG = @DCOPIDLNG@ +DCOP_DEPENDENCIES = @DCOP_DEPENDENCIES@ +DEFS = @DEFS@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +GMSGFMT = @GMSGFMT@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +KCFG_DEPENDENCIES = @KCFG_DEPENDENCIES@ +KCONFIG_COMPILER = @KCONFIG_COMPILER@ +KDECONFIG = @KDECONFIG@ +KDE_EXTRA_RPATH = @KDE_EXTRA_RPATH@ +KDE_RPATH = @KDE_RPATH@ +KDE_XSL_STYLESHEET = @KDE_XSL_STYLESHEET@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LN_S = @LN_S@ +LTLIBOBJS = @LTLIBOBJS@ +MAKEINFO = @MAKEINFO@ +MAKEKDEWIDGETS = @MAKEKDEWIDGETS@ +MCOPIDL = @MCOPIDL@ +MEINPROC = @MEINPROC@ +MKDIR_P = @MKDIR_P@ +MSGFMT = @MSGFMT@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +TOPSUBDIRS = @TOPSUBDIRS@ +VERSION = @VERSION@ +XGETTEXT = @XGETTEXT@ +XMLLINT = @XMLLINT@ +X_RPATH = @X_RPATH@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +am__leading_dot = @am__leading_dot@ +am__tar = @am__tar@ +am__untar = @am__untar@ +#>- bindir = @bindir@ +#>+ 2 +DEPDIR = .deps +bindir = @bindir@ +build_alias = @build_alias@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host_alias = @host_alias@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +kde_appsdir = @kde_appsdir@ +kde_bindir = @kde_bindir@ +kde_confdir = @kde_confdir@ +kde_datadir = @kde_datadir@ +kde_htmldir = @kde_htmldir@ +kde_icondir = @kde_icondir@ +kde_kcfgdir = @kde_kcfgdir@ +kde_libs_htmldir = @kde_libs_htmldir@ +kde_libs_prefix = @kde_libs_prefix@ +kde_locale = @kde_locale@ +kde_mimedir = @kde_mimedir@ +kde_moduledir = @kde_moduledir@ +kde_servicesdir = @kde_servicesdir@ +kde_servicetypesdir = @kde_servicetypesdir@ +kde_sounddir = @kde_sounddir@ +kde_styledir = @kde_styledir@ +kde_templatesdir = @kde_templatesdir@ +kde_wallpaperdir = @kde_wallpaperdir@ +kde_widgetdir = @kde_widgetdir@ +tdeinitdir = @tdeinitdir@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +xdg_appsdir = @xdg_appsdir@ +xdg_directorydir = @xdg_directorydir@ +xdg_menudir = @xdg_menudir@ +KDE_LANG = ru +#>- SUBDIRS = $(AUTODIRS) +#>+ 1 +SUBDIRS =. +KDE_DOCS = AUTO +KDE_MANS = AUTO +#>- all: all-recursive +#>+ 1 +all: docs-am all-recursive + +.SUFFIXES: +$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) +#>- @for dep in $?; do \ +#>- case '$(am__configure_deps)' in \ +#>- *$$dep*) \ +#>- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ +#>- && exit 0; \ +#>- exit 1;; \ +#>- esac; \ +#>- done; \ +#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/tdeaddons/kicker-applets/Makefile'; \ +#>- cd $(top_srcdir) && \ +#>- $(AUTOMAKE) --gnu docs/tdeaddons/kicker-applets/Makefile +#>+ 12 + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/tdeaddons/kicker-applets/Makefile'; \ + cd $(top_srcdir) && \ + $(AUTOMAKE) --gnu docs/tdeaddons/kicker-applets/Makefile + cd $(top_srcdir) && perl ../scripts/admin/am_edit -p../scripts/admin docs/tdeaddons/kicker-applets/Makefile.in +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +# This directory's subdirectories are mostly independent; you can cd +# into them and run `make' without going through this Makefile. +# To change the values of `make' variables: instead of editing Makefiles, +# (1) if the variable is set in `config.status', edit `config.status' +# (which will cause the Makefiles to be regenerated when you run `make'); +# (2) otherwise, pass the desired values on the `make' command line. +$(RECURSIVE_TARGETS): + @failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ + *=* | --[!k]*);; \ + *k*) failcom='fail=yes';; \ + esac; \ + done; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + dot_seen=yes; \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +$(RECURSIVE_CLEAN_TARGETS): + @failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ + *=* | --[!k]*);; \ + *k*) failcom='fail=yes';; \ + esac; \ + done; \ + dot_seen=no; \ + case "$@" in \ + distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ + *) list='$(SUBDIRS)' ;; \ + esac; \ + rev=''; for subdir in $$list; do \ + if test "$$subdir" = "."; then :; else \ + rev="$$subdir $$rev"; \ + fi; \ + done; \ + rev="$$rev ."; \ + target=`echo $@ | sed s/-recursive//`; \ + for subdir in $$rev; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done && test -z "$$fail" +tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + done +ctags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + done + +ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + mkid -fID $$unique +tags: TAGS + +TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ + if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ + empty_fix=.; \ + else \ + include_option=--include; \ + empty_fix=; \ + fi; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test ! -f $$subdir/TAGS || \ + tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$tags $$unique; \ + fi +ctags: CTAGS +CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + test -z "$(CTAGS_ARGS)$$tags$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$tags $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && cd $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) $$here + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + +#>- distdir: $(DISTFILES) +#>+ 1 +distdir: distdir-nls $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ + cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ + || cp -p $$d/$$file $(distdir)/$$file \ + || exit 1; \ + fi; \ + done + list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -d "$(distdir)/$$subdir" \ + || $(MKDIR_P) "$(distdir)/$$subdir" \ + || exit 1; \ + distdir=`$(am__cd) $(distdir) && pwd`; \ + top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ + (cd $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$$top_distdir" \ + distdir="$$distdir/$$subdir" \ + am__remove_distdir=: \ + am__skip_length_check=: \ + distdir) \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-recursive +all-am: Makefile +installdirs: installdirs-recursive +installdirs-am: +install: install-recursive +install-exec: install-exec-recursive +install-data: install-data-recursive +#>- uninstall: uninstall-recursive +#>+ 1 +uninstall: uninstall-docs uninstall-nls uninstall-recursive + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-recursive +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +#>- clean: clean-recursive +#>+ 1 +clean: kde-rpo-clean clean-recursive + +#>- clean-am: clean-generic mostlyclean-am +#>+ 1 +clean-am: clean-docs clean-bcheck clean-generic mostlyclean-am + +distclean: distclean-recursive + -rm -f Makefile +distclean-am: clean-am distclean-generic distclean-tags + +dvi: dvi-recursive + +dvi-am: + +html: html-recursive + +info: info-recursive + +info-am: + +#>- install-data-am: +#>+ 1 +install-data-am: install-docs install-nls + +install-dvi: install-dvi-recursive + +install-exec-am: + +install-html: install-html-recursive + +install-info: install-info-recursive + +install-man: + +install-pdf: install-pdf-recursive + +install-ps: install-ps-recursive + +installcheck-am: + +maintainer-clean: maintainer-clean-recursive + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-recursive + +mostlyclean-am: mostlyclean-generic + +pdf: pdf-recursive + +pdf-am: + +ps: ps-recursive + +ps-am: + +uninstall-am: + +.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ + install-strip + +.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ + all all-am check check-am clean clean-generic ctags \ + ctags-recursive distclean distclean-generic distclean-tags \ + distdir dvi dvi-am html html-am info info-am install \ + install-am install-data install-data-am install-dvi \ + install-dvi-am install-exec install-exec-am install-html \ + install-html-am install-info install-info-am install-man \ + install-pdf install-pdf-am install-ps install-ps-am \ + install-strip installcheck installcheck-am installdirs \ + installdirs-am maintainer-clean maintainer-clean-generic \ + mostlyclean mostlyclean-generic pdf pdf-am ps ps-am tags \ + tags-recursive uninstall uninstall-am + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: + +#>+ 2 +KDE_DIST=kolourpicker.docbook Makefile.in ktimemon.docbook index.docbook Makefile.am index.cache.bz2 + +#>+ 24 +index.cache.bz2: $(srcdir)/index.docbook $(KDE_XSL_STYLESHEET) kolourpicker.docbook ktimemon.docbook index.docbook + @if test -n "$(MEINPROC)"; then echo $(MEINPROC) --check --cache index.cache.bz2 $(srcdir)/index.docbook; $(MEINPROC) --check --cache index.cache.bz2 $(srcdir)/index.docbook; fi + +docs-am: index.cache.bz2 + +install-docs: docs-am install-nls + $(mkinstalldirs) $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kicker-applets + @if test -f index.cache.bz2; then \ + echo $(INSTALL_DATA) index.cache.bz2 $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kicker-applets/; \ + $(INSTALL_DATA) index.cache.bz2 $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kicker-applets/; \ + elif test -f $(srcdir)/index.cache.bz2; then \ + echo $(INSTALL_DATA) $(srcdir)/index.cache.bz2 $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kicker-applets/; \ + $(INSTALL_DATA) $(srcdir)/index.cache.bz2 $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kicker-applets/; \ + fi + -rm -f $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kicker-applets/common + $(LN_S) $(kde_libs_htmldir)/$(KDE_LANG)/common $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kicker-applets/common + +uninstall-docs: + -rm -rf $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kicker-applets + +clean-docs: + -rm -f index.cache.bz2 + + +#>+ 13 +install-nls: + $(mkinstalldirs) $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kicker-applets + @for base in kolourpicker.docbook ktimemon.docbook index.docbook ; do \ + echo $(INSTALL_DATA) $$base $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kicker-applets/$$base ;\ + $(INSTALL_DATA) $(srcdir)/$$base $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kicker-applets/$$base ;\ + done + +uninstall-nls: + for base in kolourpicker.docbook ktimemon.docbook index.docbook ; do \ + rm -f $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kicker-applets/$$base ;\ + done + + +#>+ 5 +distdir-nls: + for file in kolourpicker.docbook ktimemon.docbook index.docbook ; do \ + cp $(srcdir)/$$file $(distdir); \ + done + +#>+ 15 +force-reedit: + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/tdeaddons/kicker-applets/Makefile'; \ + cd $(top_srcdir) && \ + $(AUTOMAKE) --gnu docs/tdeaddons/kicker-applets/Makefile + cd $(top_srcdir) && perl ../scripts/admin/am_edit -p../scripts/admin docs/tdeaddons/kicker-applets/Makefile.in + + +#>+ 21 +clean-bcheck: + rm -f *.bchecktest.cc *.bchecktest.cc.class a.out + +bcheck: bcheck-recursive + +bcheck-am: + @for i in ; do \ + if test $(srcdir)/$$i -nt $$i.bchecktest.cc; then \ + echo "int main() {return 0;}" > $$i.bchecktest.cc ; \ + echo "#include \"$$i\"" >> $$i.bchecktest.cc ; \ + echo "$$i"; \ + if ! $(CXX) $(DEFS) -I. -I$(srcdir) -I$(top_builddir) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(CXXFLAGS) $(KDE_CXXFLAGS) --dump-class-hierarchy -c $$i.bchecktest.cc; then \ + rm -f $$i.bchecktest.cc; exit 1; \ + fi ; \ + echo "" >> $$i.bchecktest.cc.class; \ + perl $(top_srcdir)/admin/bcheck.pl $$i.bchecktest.cc.class || { rm -f $$i.bchecktest.cc; exit 1; }; \ + rm -f a.out; \ + fi ; \ + done + + +#>+ 3 +final: + $(MAKE) all-am + +#>+ 3 +final-install: + $(MAKE) install-am + +#>+ 3 +no-final: + $(MAKE) all-am + +#>+ 3 +no-final-install: + $(MAKE) install-am + +#>+ 3 +kde-rpo-clean: + -rm -f *.rpo + +#>+ 3 +nmcheck: +nmcheck-am: nmcheck diff --git a/tde-i18n-ru/docs/tdeaddons/kicker-applets/index.cache.bz2 b/tde-i18n-ru/docs/tdeaddons/kicker-applets/index.cache.bz2 Binary files differnew file mode 100644 index 00000000000..deb6743c9b3 --- /dev/null +++ b/tde-i18n-ru/docs/tdeaddons/kicker-applets/index.cache.bz2 diff --git a/tde-i18n-ru/docs/tdeaddons/kicker-applets/index.docbook b/tde-i18n-ru/docs/tdeaddons/kicker-applets/index.docbook new file mode 100644 index 00000000000..068ea2a141b --- /dev/null +++ b/tde-i18n-ru/docs/tdeaddons/kicker-applets/index.docbook @@ -0,0 +1,150 @@ +<?xml version="1.0" ?> +<!DOCTYPE book PUBLIC "-//KDE//DTD DocBook XML V4.2-Based Variant V1.1//EN" +"dtd/kdex.dtd" [ + <!ENTITY doc-ktimemon SYSTEM "ktimemon.docbook"> + <!ENTITY doc-kolourpicker SYSTEM "kolourpicker.docbook"> + <!ENTITY ktimemon "<application +>KTimemon</application +>"> + <!ENTITY kolourpicker "<application +>KolourPicker</application +>"> +<!ENTITY % Russian "INCLUDE" +> <!-- change language only here --> +]> + +<book lang="&language;"> +<bookinfo> +<title +>Справочное руководство по аплетам &kicker;</title> + +<authorgroup> +<author +><firstname +> </firstname +> <surname +> </surname +> <affiliation +><address +><email> +</email +></address +></affiliation> +</author> +</authorgroup> + +<othercredit role="translator" +><firstname +>Ольга</firstname +><surname +>Карпова</surname +><affiliation +><address +><email +>karpovolga@hotmail.com</email +></address +></affiliation +><contrib +>Перевод на русский</contrib +></othercredit +> + +<date +>2001-05-12</date> +<releaseinfo +>2.20.00</releaseinfo +> <!-- Used Kicker version here --> + +<copyright> +<year +>2001</year> + +</copyright> + +<legalnotice +>&FDLNotice;</legalnotice> + +<abstract> +<para +>Справочное руководство по добавляемым аплетам (addon applets) для &kicker;, панели &kde;. </para> +</abstract> + +<keywordset> +<keyword +>KDE</keyword> +<keyword +>tdeaddons</keyword> +<keyword +>Kicker</keyword> +<keyword +>Аплеты</keyword> +</keywordset> + +</bookinfo> + +<chapter id="introduction"> +<title +>аплеты &kicker;</title> + +<para +>Аплеты - это небольшие приложения, выполняемые внутри &kicker;. Почти все, за исключением кнопок запуска, - это аплеты. Их можно добавить из <guimenu +>контекстного</guimenu +> меню или из подменю <guisubmenu +>Настройки панели</guisubmenu +>, выбрав <guisubmenu +>Добавить</guisubmenu +> и пункт меню <guimenuitem +>Аплет</guimenuitem +>. </para> + +<para +>Более подробную информацию об использовании &kicker; и о базовом наборе аплетов, сопровождающем &kicker; можно найти в справочном руководстве по &kicker;. </para> + +<para +>Аплеты, описанные в данном справочном руководстве: </para> + +<itemizedlist> +<listitem> +<para +><link linkend="kolourpicker" +>&kolourpicker;</link +></para> +</listitem> +<listitem> +<para +><link linkend="ktimemon" +>&ktimemon;</link +></para> +</listitem> +</itemizedlist> + +</chapter> + +&doc-kolourpicker; +&doc-ktimemon; + +<chapter id="credits"> +<title +>Разработчики и лицензирование</title> + +<para +>Перечень авторских прав на аплеты приведен в соответствующем разделе. </para> +&underFDL; &underGPL; </chapter> + +<appendix id="installation"> +<title +>Установка</title> + +<para +>Ещё не готово </para> + +</appendix> + + +</book> + +<!-- +Local Variables: +mode: sgml +End: +--> diff --git a/tde-i18n-ru/docs/tdeaddons/kicker-applets/kolourpicker.docbook b/tde-i18n-ru/docs/tdeaddons/kicker-applets/kolourpicker.docbook new file mode 100644 index 00000000000..b6270cf5197 --- /dev/null +++ b/tde-i18n-ru/docs/tdeaddons/kicker-applets/kolourpicker.docbook @@ -0,0 +1,69 @@ +<chapter id="kolourpicker"> +<chapterinfo> + +<title +>&kolourpicker;</title> + +<authorgroup> +<author +><firstname +> </firstname +> <surname +> </surname +> <affiliation +> <address +><email +> </email +></address> +</affiliation> +</author> +</authorgroup +> <date +> </date +> <releaseinfo +> </releaseinfo +> <abstract +> <para +>Еще не готов</para> +</abstract> + +<keywordset> +<keyword +>KDE</keyword> +<keyword +>цвет</keyword> +<keyword +>выбор</keyword> +</keywordset> +</chapterinfo> + +<title +>Введение</title> + +<para +>По <quote +>Kolourpicker</quote +> на данный момент нет документации. Если вы желаете исправить сложившуюся ситуацию, сообщите об этом в списке рассылки на <ulink url="http://master.kde.org/mailman/listinfo/kde-doc-english" +> http://master.kde.org/mailman/listinfo/kde-doc-english </ulink +>. </para> + +<sect1 id="thanks-and-acknowledgements"> +<title +>Благодарности</title> + +<para +>Перевод на русский: Ольга Карпова <email +>karpovolga@hotmail.com</email +></para +> +&underGPL; </sect1> +</chapter> + +<!-- +Local Variables: +mode: sgml +sgml-omittag: nil +sgml-shorttag: t +End: +--> + diff --git a/tde-i18n-ru/docs/tdeaddons/kicker-applets/ktimemon.docbook b/tde-i18n-ru/docs/tdeaddons/kicker-applets/ktimemon.docbook new file mode 100644 index 00000000000..f71f1c7b454 --- /dev/null +++ b/tde-i18n-ru/docs/tdeaddons/kicker-applets/ktimemon.docbook @@ -0,0 +1,461 @@ +<chapter id="ktimemon"> +<chapterinfo> + +<title +>&ktimemon;</title> + +<authorgroup> +<author +><firstname +>Martin</firstname +> <surname +>Maierhofer</surname +> <affiliation +> <address +><email +>m.maierhofer@tees.ac.uk</email +></address> +</affiliation> +</author> +<othercredit role="translator" +><firstname +>Ольга</firstname +> <surname +>Карпова</surname +> <affiliation +><address +><email +>karpovolga@hotmail.com</email +></address +></affiliation +></othercredit +> +</authorgroup> +<date +>2001-11-29</date +> <releaseinfo +>0.03.01</releaseinfo +> <abstract +> <para +>&ktimemon; - это системный монитор для рабочей среды KDE</para> +</abstract> +<keywordset> +<keyword +>KDE</keyword> +<keyword +>ktimemon</keyword> +<keyword +>системный монитор</keyword> +<keyword +>timemon</keyword> +</keywordset> +</chapterinfo> + +<title +>Введение</title> + +<para +>&ktimemon; - это небольшая программа, позволяющая следить за использованием системы вашего компьютера. Она выводит на экран диаграммы, содержащий информацию о процессоре, использовании памяти и подкачки, а также об использовании дискового пространства и контекстных переключениях. Действуя в духе <ulink url="http://www.kde.org/" +>KDE</ulink +>, она поддерживает настройку через графический интерфейс. &ktimemon; также поддерживает <emphasis +>встроенный</emphasis +> режим, то есть может выводить данные на панель системного лотка.</para> + +<note> +<para +>В настоящее время &ktimemon; поддерживает лишь ограниченное число систем: на основе &Linux; с файловой системой <filename +>/proc</filename +>, на основе &Solaris; с библиотекой <filename +>kstat</filename +> и на основе Digital &UNIX; (ранее DEC/OSF1) с системным вызовом <command +>table</command +>(2). Помощь в переносе на другие платформы приветствуется. </para> +</note> + +<para +>&ktimemon; можно запустить из командной строки или из меню &kde; <guimenu +>запуск</guimenu +> (в подменю <guisubmenu +>утилиты</guisubmenu +>). Если вы предпочитаете запуск из командной строки, &ktimemon; работает с обычными аргументами &X-Window;, такими как <option +>-geometry</option +>. &ktimemon; распознает <emphasis +>сеансы</emphasis +>, то есть следит за текущим состоянием (цвета и т.п.) и восстанавливает его во время следующего сеанса. </para> + +<sect1 id="fund"> +<title +>Основы интерфейса</title> + +<para +>После запуска &ktimemon; появится небольшое окно со сведениями об операционной системе. Если поместить курсор мыши в окно &ktimemon;, то вскоре появится <emphasis +>подсказка</emphasis +> (т.е. небольшое временное окно). В подсказке содержатся числовые данные о параметрах системы, отображенных в столбчатой диаграмме. Подсказку можно отключить (см. <link linkend="config" +>Настройки</link +>). </para +> + +<sect2 id="modes"> +<title +>Режимы визуального отображения</title> + +<para +>&ktimemon; может отображать два вида информации о системе. Как объясняется в разделе <link linkend="config" +>Настройки</link +>, кнопки мыши могут быть привязаны к определенным действиям. По умолчанию, левая кнопка мыши привязана к действию переключателя режимов, то есть при щелчке левой кнопки мыши в окне &ktimemon; высвечиваемая информация переводится из <guilabel +>Обычного режима</guilabel +> (по умолчанию) в <guilabel +>Расширенный режим</guilabel +> и обратно. </para> + +<sect3 id="normalmode"> +<title +>Обычный режим</title> + +<para +>При первом запуске &ktimemon; выдаётся информация о текущей деятельности процессора, а также об использовании памяти и подкачки. Для этого используются три диаграммы, представленные в них сведения регулярно обновляются (по умолчанию, интервал равен 0,5 с, но может быть изменён, см. <link linkend="config" +>Настройки</link +>). Три столбца на графике обозначают (слева направо): <variablelist> +<varlistentry> +<term +>Загруженность <acronym +>Процессора</acronym +>.</term> +<listitem> +<para +>KTimemon использует три разных цвета для отображения времени, в течении которого процессор находился в различных режимах. Начиная снизу, это режим ядра, режим пользователя и режим пользователя с пониженным приоритетом. В Solaris, верхняя часть отображает время, проведенное системой в режиме ожидания. Промежуток между верхней частью диаграммы и границей окна обозначает время простоя процессора.</para> +</listitem> +</varlistentry> +<varlistentry> +<term +>Использование памяти.</term> +<listitem> +<para +>Подобно диаграмме использования процессора, три области на диаграмме использования памяти обозначают (снизу вверх): память, отведенную под различные процессы, память под буфер, а также память, используемую для кэширование файлов. В системах Digital Unix средняя часть обозначает <quote +>неактивную</quote +> память (т.е, выделенную память, которая не использовалась в течение некоторого времени), в системах Solaris средняя часть не используется, а верхняя область обозначает количество памяти, используемое ядром. Промежуток между верхней частью диаграммы и границей окна обозначает свободную память.</para> +</listitem> +</varlistentry> +<varlistentry> +<term +>Использование подкачки.</term> +<listitem> +<para +>Эта диаграмма демонстрирует соотношение между текущим использованием подкачки и общим размером области подкачки в системе. </para> +</listitem> +</varlistentry> +</variablelist> +</para> + +<para +>Щелчок в окне &ktimemon; кнопки мыши, привязанной к переключателю режимов, вызывает переход в <quote +>расширенный режим</quote +>.</para> + +</sect3> + +<sect3 id="xtndmode"> +<title +>Расширенный режим </title> + +<para +>В этом режиме три диаграммы отображают системную информацию другого вида. Слева направо, они показывают:</para> + +<variablelist> +<varlistentry> +<term +>Страницы памяти.</term> +<listitem> +<para +>Эта диаграмма состоит из двух частей, в нижней части указывается количество страниц памяти, записанных во вспомогательный накопитель за последний интервал времени. Верхняя половина обозначает количество страниц, прочитанных из вспомогательного накопителя.</para> +</listitem> +</varlistentry> +<varlistentry> +<term +>Подкачка.</term> +<listitem> +<para +>Вторая диаграмма отображает аналогичную информацию об использовании подкачки.</para> +</listitem> +</varlistentry> +<varlistentry> +<term +>Контекстные переключения.</term> +<listitem> +<para +>Данная диаграмма отображает количество контекстных переключений за последний интервал времени.</para> +</listitem> +</varlistentry> +</variablelist> + +<para +>Поскольку невозможно <quote +>естественным</quote +> способом масштабировать информацию, представленную в <quote +>расширенном режиме</quote +>, &ktimemon; использует по умолчанию <emphasis +>автоматическое масштабирование</emphasis +> (см. раздел <link linkend="autoscaling" +>Часто задаваемые вопросы</link +>). Однако, возможно также выбрать определенный масштаб, см. раздел <link linkend="config" +>Настройки</link +>.</para> + +<para +>Обратите внимание на то, что в диаграммах обоих видов используются одинаковые цвета, т.е. цветовые настройки для <quote +>обычного режима</quote +> также используются для отображения информации в <quote +>расширенном режиме</quote +> (о том, как изменить цветовую схему, см. <link linkend="config" +>Настройки</link +>).</para> +</sect3> +</sect2> + </sect1> + +<sect1 id="menu"> +<title +>Структура меню</title> + +<para +>По умолчанию, правая кнопка мыши привязана к высвечиваемому на экране меню, т.е. щелчок правой кнопки мыши в окне &ktimemon; вызывает меню, о котором говорится в последующих разделах. </para> + +<sect2 id="config-menu"> +<title +><guimenuitem +>Настройки...</guimenuitem +></title> + +<para +>Пункт меню <guimenuitem +>Настройки...</guimenuitem +> используется для вызова диалога настроек. О параметрах настроек говорится в разделе <link linkend="config" +>Настройки</link +>. </para +> +</sect2> + +<sect2 id="docked-in-panel"> +<title +><guimenuitem +>Встроенный в панель</guimenuitem +></title> + +<para +>Выбор пункта меню <guimenuitem +>Встроенный в панель</guimenuitem +> вызывает переключение режимов, в которых &ktimemon; выводится на экран: от стандартного изображения (т.е. в обычном окне) к встроенному в панель, когда исчезает окно &ktimemon;, а на системной панели появляется уменьшенный вариант. За исключением разницы в размере, в остальном <quote +>встроенный</quote +> &ktimemon; функционирует таким же образом. </para +> +</sect2> + +<sect2 id="help"> +<title +><guimenu +>Справка</guimenu +></title +> &help.menu.documentation; </sect2> + +<sect2 id="horizontal-bars"> +<title +><guimenuitem +>Горизонтальная диаграмма</guimenuitem +></title> + +<para +>При выборе пункта меню &ktimemon; <guimenuitem +>Горизонтальная диаграмма</guimenuitem +> столбцы диаграммы меняют свое расположение из вертикального в горизонтальное и обратно. </para> +</sect2> + +<sect2 id="quit"> +<title +><guimenuitem +>Выход</guimenuitem +></title> + +<para +>Пункт меню <guimenuitem +>Выход</guimenuitem +> используется для выхода из &ktimemon; (что характерно!). При этом будет сохранено текущее состояние (напр. цветовая схема, размер окна, находится ли программа во встроенном в панель режиме) и восстановлено при последующем вызове программы. </para> + +<para +>Настройки сохранены в файле <filename +>$<envar +>HOME</envar +>/.kde/share/config/ktimemonrc</filename +>, где <filename class="directory" +>$<envar +>HOME</envar +></filename +> обозначает домашний каталог пользователя. Если этот файл будет удален, при последующем вызове &ktimemon; будут восстановлены параметры по умолчанию. </para +> +</sect2> +</sect1> + +<sect1 id="config"> +<title +>Настройки</title> + +<para +>Конфигурирование &ktimemon; может происходить интерактивно (см. также <link linkend="config-menu" +>Меню настроек</link +>). На странице <guilabel +>Общее</guilabel +> можно задать временной интервал обновления данных, а также выбрать масштаб (см. также <link linkend="xtndmode" +>Расширенный режим</link +>). Если поставлена метка около режима <guilabel +>Автоматическое масштабирование</guilabel +>, (о режиме автоматического масштабирования см. в разделе<link linkend="autoscaling" +>Часто задаваемые вопросы и ответы</link +>), масштабный коэффициент не может быть изменен, т.к. &ktimemon; определяет его автоматически. </para> + +<para +>На странице <guilabel +>Цвета</guilabel +> можно настроить цвета диаграммы по вашему выбору. Выбранный вариант демонстрируется на уменьшенной модели. </para> + +<para +>На странице <guilabel +>Интерактивный режим</guilabel +> можно установить привязки мыши. Щелчок мыши в окне &ktimemon; может быть проигнорирован, приводить к переключению режимов (см. также <link linkend="modes" +>Режимы</link +>), вызывать контекстное меню (см. также <link linkend="menu" +>Меню</link +>) или вызывать внешний процесс. Командная строка для внешнего процесса интерпретируется стандартной оболочкой, т.е. могут использоваться команды оболочки, переменные окружения, переадресация и т.п..</para +> + +<para +>На странице <guilabel +>Интерактивный режим</guilabel +> можно также отключить автоматическое появление подсказки с числовыми данными о диаграмме (ср. <link linkend="fund" +>Основы</link +>). </para +> +</sect1> + +<sect1 id="faq"> +<title +>Часто задаваемые вопросы и ответы </title> + +<qandaset> +<qandaentry> +<question> +<para +>Какие операционные системы поддерживает &ktimemon;?</para> +</question> +<answer> +<para +>&ktimemon; поддерживает инсталляции на основе &Linux; с файловой системой <filename +>/proc</filename +>, инсталляции на основе &Solaris; с библиотекой <filename +>kstat</filename +> и инсталляции на основе Digital &UNIX; (ранее DEC/OSF1) с интерфейсом системного вызова <command +>table</command +>(2). Лишь системы Linux прошли основательное тестирование, если у вас возникнут какие-либо проблемы с переносом на &Solaris;/Digital &UNIX; свяжитесь со мной. </para> + +<para +>Помощь в переносе &ktimemon; на другие платформы приветствуется. Свяжитесь со мной по адресу <email +>m.maierhofer@tees.ac.uk</email +>, если вы намерены перенести &ktimemon; на другие варианты &UNIX;. </para> +</answer> + +</qandaentry> + +<qandaentry id="autoscaling"> +<question> +<para +>Как осуществляется автоматическое масштабирование? </para> +</question> +<answer> +<para +>Рад, что вы спросили. Поскольку не существует логически обоснованного заранее определенного масштабного коэффициента для операций страниц памяти/подкачки и контекстных переключений (в отличие, например, от использования памяти, когда можно взять за основу общий размер памяти), &ktimemon; использует <quote +>полуразумный</quote +> механизм автоматического масштабирования. Автоматическое масштабирование осуществляется следующим образом: </para> + +<itemizedlist> +<listitem> +<para +>Каждая из трех диаграмм, как описано в разделе <link linkend="xtndmode" +>Расширенный режим</link +>, имеет соответствующий масштабный коэффициент. Исходные значения этих коэффициентов заранее определены. </para +> +</listitem> +<listitem> +<para +>Каждый раз, когда обновляются данные, соответствующее значение условно масштабируется. Если полученную величину можно отобразить на том же уровне шкалы, диаграмма сохраняется в прежнем виде (т.е. изменения отражаются в изменении высоты столбика диаграммы). </para> +</listitem> +<listitem> +<para +>Если полученная величина слишком велика или слишком мала и не может быть отображена текущим коэффициентом, масштаб выравнивается, и новое значение отмечается приблизительно посередине столбика диаграммы. Таким образом, последующие изменения могут быть отображены относительно текущего значения, без повторного изменения масштаба. </para> +</listitem> +</itemizedlist> +</answer> +</qandaentry> + +<qandaentry> +<question> +<para +>Почему появляется сообщение <errorname +>диагностика дочернего процесса</errorname +>? </para> +</question> +<answer> +<para +>Если кнопка мыши привязана к внешней команде, как описано в разделе <link linkend="config" +>Настройки</link +>, &ktimemon; не проверяет имя программы на правильность. Вместо этого вызывается оболочка для выполнения оператора (поэтому могут использоваться команды оболочки, переменные окружения, и т.п.). Для того, чтобы обеспечить обратную связь с пользователем, &ktimemon; контролирует <systemitem +>stderr</systemitem +> выходные данные оболочки и посылает отчет в окне сообщений. </para> + +<para +>Эта схема бывает полезной в случае, если процесс не обнаружен, но может быть и надоедливой, если печатает безобидную диагностическую информацию о <systemitem +>stderr</systemitem +>. Простое решение: добавьте в конце спецификации процесса <userinput +>2>/dev/null</userinput +>.Это переадресует диагностические сообщения в <quote +>дыру</quote +> и остановит появление окон с сообщениями. </para> +</answer> +</qandaentry> + +</qandaset> +</sect1> + +<sect1 id="ktimemon-thanks-and-acknowledgements"> +<title +>Благодарности</title> + +<para +>&ktimemon; создан на основе версии Xt моего брата.</para> + +<para +>Благодарность Tobe Toben, <email +>ttoben@artis.uni-oldenburg.de</email +>, Cristian Tibirna <email +>ctibirna@gch.ulaval.ca</email +>, Dirk A. Mueller <email +>dmuell@rhrk.uni-kl.de</email +>, Mark Krischer <email +>krischem@amp.com</email +>, and Lubos Lunak <email +>l.lunak@sh.cvut.cz</email +>за сообщения об ошибках, патчи, комментарии и предложения. </para> + +<para +>Перевод на русский: Ольга Карпова<email +>karpovolga@hotmail.com</email +></para +> +&underGPL; </sect1> +</chapter> + +<!-- +Local Variables: +mode: sgml +sgml-omittag: nil +sgml-shorttag: t +End: +--> + diff --git a/tde-i18n-ru/docs/tdeaddons/konq-plugins/Makefile.am b/tde-i18n-ru/docs/tdeaddons/konq-plugins/Makefile.am new file mode 100644 index 00000000000..e8ff7c7b1b8 --- /dev/null +++ b/tde-i18n-ru/docs/tdeaddons/konq-plugins/Makefile.am @@ -0,0 +1,4 @@ +KDE_LANG = ru +SUBDIRS = $(AUTODIRS) +KDE_DOCS = AUTO +KDE_MANS = AUTO diff --git a/tde-i18n-ru/docs/tdeaddons/konq-plugins/Makefile.in b/tde-i18n-ru/docs/tdeaddons/konq-plugins/Makefile.in new file mode 100644 index 00000000000..e3169678801 --- /dev/null +++ b/tde-i18n-ru/docs/tdeaddons/konq-plugins/Makefile.in @@ -0,0 +1,587 @@ +# Makefile.in generated by automake 1.10.1 from Makefile.am. +# KDE tags expanded automatically by am_edit - $Revision: 483858 $ +# @configure_input@ + +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ +VPATH = @srcdir@ +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +subdir = docs/tdeaddons/konq-plugins +DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ + $(top_srcdir)/configure.in +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +CONFIG_HEADER = $(top_builddir)/config.h +CONFIG_CLEAN_FILES = +SOURCES = +DIST_SOURCES = +#>- RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ +#>- html-recursive info-recursive install-data-recursive \ +#>- install-dvi-recursive install-exec-recursive \ +#>- install-html-recursive install-info-recursive \ +#>- install-pdf-recursive install-ps-recursive install-recursive \ +#>- installcheck-recursive installdirs-recursive pdf-recursive \ +#>- ps-recursive uninstall-recursive +#>+ 7 +RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ + html-recursive info-recursive install-data-recursive \ + install-dvi-recursive install-exec-recursive \ + install-html-recursive install-info-recursive \ + install-pdf-recursive install-ps-recursive install-recursive \ + installcheck-recursive installdirs-recursive pdf-recursive \ + ps-recursive uninstall-recursive nmcheck-recursive bcheck-recursive +RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ + distclean-recursive maintainer-clean-recursive +ETAGS = etags +CTAGS = ctags +DIST_SUBDIRS = $(SUBDIRS) +#>- DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +#>+ 1 +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) $(KDE_DIST) +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +ARTSCCONFIG = @ARTSCCONFIG@ +AUTOCONF = @AUTOCONF@ +AUTODIRS = @AUTODIRS@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CONF_FILES = @CONF_FILES@ +CYGPATH_W = @CYGPATH_W@ +DCOPIDL = @DCOPIDL@ +DCOPIDL2CPP = @DCOPIDL2CPP@ +DCOPIDLNG = @DCOPIDLNG@ +DCOP_DEPENDENCIES = @DCOP_DEPENDENCIES@ +DEFS = @DEFS@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +GMSGFMT = @GMSGFMT@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +KCFG_DEPENDENCIES = @KCFG_DEPENDENCIES@ +KCONFIG_COMPILER = @KCONFIG_COMPILER@ +KDECONFIG = @KDECONFIG@ +KDE_EXTRA_RPATH = @KDE_EXTRA_RPATH@ +KDE_RPATH = @KDE_RPATH@ +KDE_XSL_STYLESHEET = @KDE_XSL_STYLESHEET@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LN_S = @LN_S@ +LTLIBOBJS = @LTLIBOBJS@ +MAKEINFO = @MAKEINFO@ +MAKEKDEWIDGETS = @MAKEKDEWIDGETS@ +MCOPIDL = @MCOPIDL@ +MEINPROC = @MEINPROC@ +MKDIR_P = @MKDIR_P@ +MSGFMT = @MSGFMT@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +TOPSUBDIRS = @TOPSUBDIRS@ +VERSION = @VERSION@ +XGETTEXT = @XGETTEXT@ +XMLLINT = @XMLLINT@ +X_RPATH = @X_RPATH@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +am__leading_dot = @am__leading_dot@ +am__tar = @am__tar@ +am__untar = @am__untar@ +#>- bindir = @bindir@ +#>+ 2 +DEPDIR = .deps +bindir = @bindir@ +build_alias = @build_alias@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host_alias = @host_alias@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +kde_appsdir = @kde_appsdir@ +kde_bindir = @kde_bindir@ +kde_confdir = @kde_confdir@ +kde_datadir = @kde_datadir@ +kde_htmldir = @kde_htmldir@ +kde_icondir = @kde_icondir@ +kde_kcfgdir = @kde_kcfgdir@ +kde_libs_htmldir = @kde_libs_htmldir@ +kde_libs_prefix = @kde_libs_prefix@ +kde_locale = @kde_locale@ +kde_mimedir = @kde_mimedir@ +kde_moduledir = @kde_moduledir@ +kde_servicesdir = @kde_servicesdir@ +kde_servicetypesdir = @kde_servicetypesdir@ +kde_sounddir = @kde_sounddir@ +kde_styledir = @kde_styledir@ +kde_templatesdir = @kde_templatesdir@ +kde_wallpaperdir = @kde_wallpaperdir@ +kde_widgetdir = @kde_widgetdir@ +tdeinitdir = @tdeinitdir@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +xdg_appsdir = @xdg_appsdir@ +xdg_directorydir = @xdg_directorydir@ +xdg_menudir = @xdg_menudir@ +KDE_LANG = ru +#>- SUBDIRS = $(AUTODIRS) +#>+ 1 +SUBDIRS =. uachanger dirfilter webarchiver crashes mediaplayer +KDE_DOCS = AUTO +KDE_MANS = AUTO +#>- all: all-recursive +#>+ 1 +all: docs-am all-recursive + +.SUFFIXES: +$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) +#>- @for dep in $?; do \ +#>- case '$(am__configure_deps)' in \ +#>- *$$dep*) \ +#>- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ +#>- && exit 0; \ +#>- exit 1;; \ +#>- esac; \ +#>- done; \ +#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/tdeaddons/konq-plugins/Makefile'; \ +#>- cd $(top_srcdir) && \ +#>- $(AUTOMAKE) --gnu docs/tdeaddons/konq-plugins/Makefile +#>+ 12 + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/tdeaddons/konq-plugins/Makefile'; \ + cd $(top_srcdir) && \ + $(AUTOMAKE) --gnu docs/tdeaddons/konq-plugins/Makefile + cd $(top_srcdir) && perl ../scripts/admin/am_edit -p../scripts/admin docs/tdeaddons/konq-plugins/Makefile.in +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +# This directory's subdirectories are mostly independent; you can cd +# into them and run `make' without going through this Makefile. +# To change the values of `make' variables: instead of editing Makefiles, +# (1) if the variable is set in `config.status', edit `config.status' +# (which will cause the Makefiles to be regenerated when you run `make'); +# (2) otherwise, pass the desired values on the `make' command line. +$(RECURSIVE_TARGETS): + @failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ + *=* | --[!k]*);; \ + *k*) failcom='fail=yes';; \ + esac; \ + done; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + dot_seen=yes; \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +$(RECURSIVE_CLEAN_TARGETS): + @failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ + *=* | --[!k]*);; \ + *k*) failcom='fail=yes';; \ + esac; \ + done; \ + dot_seen=no; \ + case "$@" in \ + distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ + *) list='$(SUBDIRS)' ;; \ + esac; \ + rev=''; for subdir in $$list; do \ + if test "$$subdir" = "."; then :; else \ + rev="$$subdir $$rev"; \ + fi; \ + done; \ + rev="$$rev ."; \ + target=`echo $@ | sed s/-recursive//`; \ + for subdir in $$rev; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done && test -z "$$fail" +tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + done +ctags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + done + +ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + mkid -fID $$unique +tags: TAGS + +TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ + if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ + empty_fix=.; \ + else \ + include_option=--include; \ + empty_fix=; \ + fi; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test ! -f $$subdir/TAGS || \ + tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$tags $$unique; \ + fi +ctags: CTAGS +CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + test -z "$(CTAGS_ARGS)$$tags$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$tags $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && cd $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) $$here + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + +distdir: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ + cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ + || cp -p $$d/$$file $(distdir)/$$file \ + || exit 1; \ + fi; \ + done + list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -d "$(distdir)/$$subdir" \ + || $(MKDIR_P) "$(distdir)/$$subdir" \ + || exit 1; \ + distdir=`$(am__cd) $(distdir) && pwd`; \ + top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ + (cd $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$$top_distdir" \ + distdir="$$distdir/$$subdir" \ + am__remove_distdir=: \ + am__skip_length_check=: \ + distdir) \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-recursive +all-am: Makefile +installdirs: installdirs-recursive +installdirs-am: +install: install-recursive +install-exec: install-exec-recursive +install-data: install-data-recursive +uninstall: uninstall-recursive + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-recursive +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +#>- clean: clean-recursive +#>+ 1 +clean: kde-rpo-clean clean-recursive + +#>- clean-am: clean-generic mostlyclean-am +#>+ 1 +clean-am: clean-bcheck clean-generic mostlyclean-am + +distclean: distclean-recursive + -rm -f Makefile +distclean-am: clean-am distclean-generic distclean-tags + +dvi: dvi-recursive + +dvi-am: + +html: html-recursive + +info: info-recursive + +info-am: + +install-data-am: + +install-dvi: install-dvi-recursive + +install-exec-am: + +install-html: install-html-recursive + +install-info: install-info-recursive + +install-man: + +install-pdf: install-pdf-recursive + +install-ps: install-ps-recursive + +installcheck-am: + +maintainer-clean: maintainer-clean-recursive + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-recursive + +mostlyclean-am: mostlyclean-generic + +pdf: pdf-recursive + +pdf-am: + +ps: ps-recursive + +ps-am: + +uninstall-am: + +.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ + install-strip + +.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ + all all-am check check-am clean clean-generic ctags \ + ctags-recursive distclean distclean-generic distclean-tags \ + distdir dvi dvi-am html html-am info info-am install \ + install-am install-data install-data-am install-dvi \ + install-dvi-am install-exec install-exec-am install-html \ + install-html-am install-info install-info-am install-man \ + install-pdf install-pdf-am install-ps install-ps-am \ + install-strip installcheck installcheck-am installdirs \ + installdirs-am maintainer-clean maintainer-clean-generic \ + mostlyclean mostlyclean-generic pdf pdf-am ps ps-am tags \ + tags-recursive uninstall uninstall-am + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: + +#>+ 2 +KDE_DIST=Makefile.in Makefile.am + +#>+ 2 +docs-am: + +#>+ 15 +force-reedit: + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/tdeaddons/konq-plugins/Makefile'; \ + cd $(top_srcdir) && \ + $(AUTOMAKE) --gnu docs/tdeaddons/konq-plugins/Makefile + cd $(top_srcdir) && perl ../scripts/admin/am_edit -p../scripts/admin docs/tdeaddons/konq-plugins/Makefile.in + + +#>+ 21 +clean-bcheck: + rm -f *.bchecktest.cc *.bchecktest.cc.class a.out + +bcheck: bcheck-recursive + +bcheck-am: + @for i in ; do \ + if test $(srcdir)/$$i -nt $$i.bchecktest.cc; then \ + echo "int main() {return 0;}" > $$i.bchecktest.cc ; \ + echo "#include \"$$i\"" >> $$i.bchecktest.cc ; \ + echo "$$i"; \ + if ! $(CXX) $(DEFS) -I. -I$(srcdir) -I$(top_builddir) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(CXXFLAGS) $(KDE_CXXFLAGS) --dump-class-hierarchy -c $$i.bchecktest.cc; then \ + rm -f $$i.bchecktest.cc; exit 1; \ + fi ; \ + echo "" >> $$i.bchecktest.cc.class; \ + perl $(top_srcdir)/admin/bcheck.pl $$i.bchecktest.cc.class || { rm -f $$i.bchecktest.cc; exit 1; }; \ + rm -f a.out; \ + fi ; \ + done + + +#>+ 3 +final: + $(MAKE) all-am + +#>+ 3 +final-install: + $(MAKE) install-am + +#>+ 3 +no-final: + $(MAKE) all-am + +#>+ 3 +no-final-install: + $(MAKE) install-am + +#>+ 3 +kde-rpo-clean: + -rm -f *.rpo + +#>+ 3 +nmcheck: +nmcheck-am: nmcheck diff --git a/tde-i18n-ru/docs/tdeaddons/konq-plugins/crashes/Makefile.am b/tde-i18n-ru/docs/tdeaddons/konq-plugins/crashes/Makefile.am new file mode 100644 index 00000000000..76be50457d7 --- /dev/null +++ b/tde-i18n-ru/docs/tdeaddons/konq-plugins/crashes/Makefile.am @@ -0,0 +1,4 @@ +KDE_LANG = ru +SUBDIRS = $(AUTODIRS) +KDE_DOCS = konq-plugins/crashes +KDE_MANS = AUTO diff --git a/tde-i18n-ru/docs/tdeaddons/konq-plugins/crashes/Makefile.in b/tde-i18n-ru/docs/tdeaddons/konq-plugins/crashes/Makefile.in new file mode 100644 index 00000000000..b3907ff4a1e --- /dev/null +++ b/tde-i18n-ru/docs/tdeaddons/konq-plugins/crashes/Makefile.in @@ -0,0 +1,635 @@ +# Makefile.in generated by automake 1.10.1 from Makefile.am. +# KDE tags expanded automatically by am_edit - $Revision: 483858 $ +# @configure_input@ + +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ +VPATH = @srcdir@ +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +subdir = docs/tdeaddons/konq-plugins/crashes +DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ + $(top_srcdir)/configure.in +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +CONFIG_HEADER = $(top_builddir)/config.h +CONFIG_CLEAN_FILES = +SOURCES = +DIST_SOURCES = +#>- RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ +#>- html-recursive info-recursive install-data-recursive \ +#>- install-dvi-recursive install-exec-recursive \ +#>- install-html-recursive install-info-recursive \ +#>- install-pdf-recursive install-ps-recursive install-recursive \ +#>- installcheck-recursive installdirs-recursive pdf-recursive \ +#>- ps-recursive uninstall-recursive +#>+ 7 +RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ + html-recursive info-recursive install-data-recursive \ + install-dvi-recursive install-exec-recursive \ + install-html-recursive install-info-recursive \ + install-pdf-recursive install-ps-recursive install-recursive \ + installcheck-recursive installdirs-recursive pdf-recursive \ + ps-recursive uninstall-recursive nmcheck-recursive bcheck-recursive +RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ + distclean-recursive maintainer-clean-recursive +ETAGS = etags +CTAGS = ctags +DIST_SUBDIRS = $(SUBDIRS) +#>- DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +#>+ 1 +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) $(KDE_DIST) +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +ARTSCCONFIG = @ARTSCCONFIG@ +AUTOCONF = @AUTOCONF@ +AUTODIRS = @AUTODIRS@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CONF_FILES = @CONF_FILES@ +CYGPATH_W = @CYGPATH_W@ +DCOPIDL = @DCOPIDL@ +DCOPIDL2CPP = @DCOPIDL2CPP@ +DCOPIDLNG = @DCOPIDLNG@ +DCOP_DEPENDENCIES = @DCOP_DEPENDENCIES@ +DEFS = @DEFS@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +GMSGFMT = @GMSGFMT@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +KCFG_DEPENDENCIES = @KCFG_DEPENDENCIES@ +KCONFIG_COMPILER = @KCONFIG_COMPILER@ +KDECONFIG = @KDECONFIG@ +KDE_EXTRA_RPATH = @KDE_EXTRA_RPATH@ +KDE_RPATH = @KDE_RPATH@ +KDE_XSL_STYLESHEET = @KDE_XSL_STYLESHEET@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LN_S = @LN_S@ +LTLIBOBJS = @LTLIBOBJS@ +MAKEINFO = @MAKEINFO@ +MAKEKDEWIDGETS = @MAKEKDEWIDGETS@ +MCOPIDL = @MCOPIDL@ +MEINPROC = @MEINPROC@ +MKDIR_P = @MKDIR_P@ +MSGFMT = @MSGFMT@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +TOPSUBDIRS = @TOPSUBDIRS@ +VERSION = @VERSION@ +XGETTEXT = @XGETTEXT@ +XMLLINT = @XMLLINT@ +X_RPATH = @X_RPATH@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +am__leading_dot = @am__leading_dot@ +am__tar = @am__tar@ +am__untar = @am__untar@ +#>- bindir = @bindir@ +#>+ 2 +DEPDIR = .deps +bindir = @bindir@ +build_alias = @build_alias@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host_alias = @host_alias@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +kde_appsdir = @kde_appsdir@ +kde_bindir = @kde_bindir@ +kde_confdir = @kde_confdir@ +kde_datadir = @kde_datadir@ +kde_htmldir = @kde_htmldir@ +kde_icondir = @kde_icondir@ +kde_kcfgdir = @kde_kcfgdir@ +kde_libs_htmldir = @kde_libs_htmldir@ +kde_libs_prefix = @kde_libs_prefix@ +kde_locale = @kde_locale@ +kde_mimedir = @kde_mimedir@ +kde_moduledir = @kde_moduledir@ +kde_servicesdir = @kde_servicesdir@ +kde_servicetypesdir = @kde_servicetypesdir@ +kde_sounddir = @kde_sounddir@ +kde_styledir = @kde_styledir@ +kde_templatesdir = @kde_templatesdir@ +kde_wallpaperdir = @kde_wallpaperdir@ +kde_widgetdir = @kde_widgetdir@ +tdeinitdir = @tdeinitdir@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +xdg_appsdir = @xdg_appsdir@ +xdg_directorydir = @xdg_directorydir@ +xdg_menudir = @xdg_menudir@ +KDE_LANG = ru +#>- SUBDIRS = $(AUTODIRS) +#>+ 1 +SUBDIRS =. +KDE_DOCS = konq-plugins/crashes +KDE_MANS = AUTO +#>- all: all-recursive +#>+ 1 +all: docs-am all-recursive + +.SUFFIXES: +$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) +#>- @for dep in $?; do \ +#>- case '$(am__configure_deps)' in \ +#>- *$$dep*) \ +#>- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ +#>- && exit 0; \ +#>- exit 1;; \ +#>- esac; \ +#>- done; \ +#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/tdeaddons/konq-plugins/crashes/Makefile'; \ +#>- cd $(top_srcdir) && \ +#>- $(AUTOMAKE) --gnu docs/tdeaddons/konq-plugins/crashes/Makefile +#>+ 12 + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/tdeaddons/konq-plugins/crashes/Makefile'; \ + cd $(top_srcdir) && \ + $(AUTOMAKE) --gnu docs/tdeaddons/konq-plugins/crashes/Makefile + cd $(top_srcdir) && perl ../scripts/admin/am_edit -p../scripts/admin docs/tdeaddons/konq-plugins/crashes/Makefile.in +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +# This directory's subdirectories are mostly independent; you can cd +# into them and run `make' without going through this Makefile. +# To change the values of `make' variables: instead of editing Makefiles, +# (1) if the variable is set in `config.status', edit `config.status' +# (which will cause the Makefiles to be regenerated when you run `make'); +# (2) otherwise, pass the desired values on the `make' command line. +$(RECURSIVE_TARGETS): + @failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ + *=* | --[!k]*);; \ + *k*) failcom='fail=yes';; \ + esac; \ + done; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + dot_seen=yes; \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +$(RECURSIVE_CLEAN_TARGETS): + @failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ + *=* | --[!k]*);; \ + *k*) failcom='fail=yes';; \ + esac; \ + done; \ + dot_seen=no; \ + case "$@" in \ + distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ + *) list='$(SUBDIRS)' ;; \ + esac; \ + rev=''; for subdir in $$list; do \ + if test "$$subdir" = "."; then :; else \ + rev="$$subdir $$rev"; \ + fi; \ + done; \ + rev="$$rev ."; \ + target=`echo $@ | sed s/-recursive//`; \ + for subdir in $$rev; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done && test -z "$$fail" +tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + done +ctags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + done + +ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + mkid -fID $$unique +tags: TAGS + +TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ + if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ + empty_fix=.; \ + else \ + include_option=--include; \ + empty_fix=; \ + fi; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test ! -f $$subdir/TAGS || \ + tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$tags $$unique; \ + fi +ctags: CTAGS +CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + test -z "$(CTAGS_ARGS)$$tags$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$tags $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && cd $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) $$here + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + +#>- distdir: $(DISTFILES) +#>+ 1 +distdir: distdir-nls $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ + cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ + || cp -p $$d/$$file $(distdir)/$$file \ + || exit 1; \ + fi; \ + done + list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -d "$(distdir)/$$subdir" \ + || $(MKDIR_P) "$(distdir)/$$subdir" \ + || exit 1; \ + distdir=`$(am__cd) $(distdir) && pwd`; \ + top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ + (cd $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$$top_distdir" \ + distdir="$$distdir/$$subdir" \ + am__remove_distdir=: \ + am__skip_length_check=: \ + distdir) \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-recursive +all-am: Makefile +installdirs: installdirs-recursive +installdirs-am: +install: install-recursive +install-exec: install-exec-recursive +install-data: install-data-recursive +#>- uninstall: uninstall-recursive +#>+ 1 +uninstall: uninstall-docs uninstall-nls uninstall-recursive + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-recursive +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +#>- clean: clean-recursive +#>+ 1 +clean: kde-rpo-clean clean-recursive + +#>- clean-am: clean-generic mostlyclean-am +#>+ 1 +clean-am: clean-docs clean-bcheck clean-generic mostlyclean-am + +distclean: distclean-recursive + -rm -f Makefile +distclean-am: clean-am distclean-generic distclean-tags + +dvi: dvi-recursive + +dvi-am: + +html: html-recursive + +info: info-recursive + +info-am: + +#>- install-data-am: +#>+ 1 +install-data-am: install-docs install-nls + +install-dvi: install-dvi-recursive + +install-exec-am: + +install-html: install-html-recursive + +install-info: install-info-recursive + +install-man: + +install-pdf: install-pdf-recursive + +install-ps: install-ps-recursive + +installcheck-am: + +maintainer-clean: maintainer-clean-recursive + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-recursive + +mostlyclean-am: mostlyclean-generic + +pdf: pdf-recursive + +pdf-am: + +ps: ps-recursive + +ps-am: + +uninstall-am: + +.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ + install-strip + +.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ + all all-am check check-am clean clean-generic ctags \ + ctags-recursive distclean distclean-generic distclean-tags \ + distdir dvi dvi-am html html-am info info-am install \ + install-am install-data install-data-am install-dvi \ + install-dvi-am install-exec install-exec-am install-html \ + install-html-am install-info install-info-am install-man \ + install-pdf install-pdf-am install-ps install-ps-am \ + install-strip installcheck installcheck-am installdirs \ + installdirs-am maintainer-clean maintainer-clean-generic \ + mostlyclean mostlyclean-generic pdf pdf-am ps ps-am tags \ + tags-recursive uninstall uninstall-am + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: + +#>+ 2 +KDE_DIST=Makefile.in index.docbook Makefile.am index.cache.bz2 + +#>+ 24 +index.cache.bz2: $(srcdir)/index.docbook $(KDE_XSL_STYLESHEET) index.docbook + @if test -n "$(MEINPROC)"; then echo $(MEINPROC) --check --cache index.cache.bz2 $(srcdir)/index.docbook; $(MEINPROC) --check --cache index.cache.bz2 $(srcdir)/index.docbook; fi + +docs-am: index.cache.bz2 + +install-docs: docs-am install-nls + $(mkinstalldirs) $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/konq-plugins/crashes + @if test -f index.cache.bz2; then \ + echo $(INSTALL_DATA) index.cache.bz2 $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/konq-plugins/crashes/; \ + $(INSTALL_DATA) index.cache.bz2 $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/konq-plugins/crashes/; \ + elif test -f $(srcdir)/index.cache.bz2; then \ + echo $(INSTALL_DATA) $(srcdir)/index.cache.bz2 $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/konq-plugins/crashes/; \ + $(INSTALL_DATA) $(srcdir)/index.cache.bz2 $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/konq-plugins/crashes/; \ + fi + -rm -f $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/konq-plugins/crashes/common + $(LN_S) $(kde_libs_htmldir)/$(KDE_LANG)/common $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/konq-plugins/crashes/common + +uninstall-docs: + -rm -rf $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/konq-plugins/crashes + +clean-docs: + -rm -f index.cache.bz2 + + +#>+ 13 +install-nls: + $(mkinstalldirs) $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/konq-plugins/crashes + @for base in index.docbook ; do \ + echo $(INSTALL_DATA) $$base $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/konq-plugins/crashes/$$base ;\ + $(INSTALL_DATA) $(srcdir)/$$base $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/konq-plugins/crashes/$$base ;\ + done + +uninstall-nls: + for base in index.docbook ; do \ + rm -f $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/konq-plugins/crashes/$$base ;\ + done + + +#>+ 5 +distdir-nls: + for file in index.docbook ; do \ + cp $(srcdir)/$$file $(distdir); \ + done + +#>+ 15 +force-reedit: + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/tdeaddons/konq-plugins/crashes/Makefile'; \ + cd $(top_srcdir) && \ + $(AUTOMAKE) --gnu docs/tdeaddons/konq-plugins/crashes/Makefile + cd $(top_srcdir) && perl ../scripts/admin/am_edit -p../scripts/admin docs/tdeaddons/konq-plugins/crashes/Makefile.in + + +#>+ 21 +clean-bcheck: + rm -f *.bchecktest.cc *.bchecktest.cc.class a.out + +bcheck: bcheck-recursive + +bcheck-am: + @for i in ; do \ + if test $(srcdir)/$$i -nt $$i.bchecktest.cc; then \ + echo "int main() {return 0;}" > $$i.bchecktest.cc ; \ + echo "#include \"$$i\"" >> $$i.bchecktest.cc ; \ + echo "$$i"; \ + if ! $(CXX) $(DEFS) -I. -I$(srcdir) -I$(top_builddir) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(CXXFLAGS) $(KDE_CXXFLAGS) --dump-class-hierarchy -c $$i.bchecktest.cc; then \ + rm -f $$i.bchecktest.cc; exit 1; \ + fi ; \ + echo "" >> $$i.bchecktest.cc.class; \ + perl $(top_srcdir)/admin/bcheck.pl $$i.bchecktest.cc.class || { rm -f $$i.bchecktest.cc; exit 1; }; \ + rm -f a.out; \ + fi ; \ + done + + +#>+ 3 +final: + $(MAKE) all-am + +#>+ 3 +final-install: + $(MAKE) install-am + +#>+ 3 +no-final: + $(MAKE) all-am + +#>+ 3 +no-final-install: + $(MAKE) install-am + +#>+ 3 +kde-rpo-clean: + -rm -f *.rpo + +#>+ 3 +nmcheck: +nmcheck-am: nmcheck diff --git a/tde-i18n-ru/docs/tdeaddons/konq-plugins/crashes/index.cache.bz2 b/tde-i18n-ru/docs/tdeaddons/konq-plugins/crashes/index.cache.bz2 Binary files differnew file mode 100644 index 00000000000..7d46996ad38 --- /dev/null +++ b/tde-i18n-ru/docs/tdeaddons/konq-plugins/crashes/index.cache.bz2 diff --git a/tde-i18n-ru/docs/tdeaddons/konq-plugins/crashes/index.docbook b/tde-i18n-ru/docs/tdeaddons/konq-plugins/crashes/index.docbook new file mode 100644 index 00000000000..dcb7fac9a9a --- /dev/null +++ b/tde-i18n-ru/docs/tdeaddons/konq-plugins/crashes/index.docbook @@ -0,0 +1,97 @@ +<?xml version="1.0" ?> +<!DOCTYPE article PUBLIC "-//KDE//DTD DocBook XML V4.2-Based Variant V1.1//EN" +"dtd/kdex.dtd" [ +<!ENTITY % addindex "IGNORE"> +<!ENTITY % Russian "INCLUDE" +> <!-- change language only here --> +]> + +<article lang="&language;"> + +<sect1 id="crashesplugin"> +<sect1info> + +<authorgroup> +<author +><firstname +>Gardner</firstname +> <surname +>Bell</surname +> <affiliation +><address +><email +>gbell72@rogers.com</email +></address +></affiliation> +</author> + +<othercredit role="translator" +><firstname +>Andrei</firstname +><surname +>Darashenka</surname +><affiliation +><address +><email +>adorosh@chat.ru</email +></address +></affiliation +><contrib +>Перевод на русский</contrib +></othercredit +> +</authorgroup> +<date +>2004-07-21</date +> <releaseinfo +>3.10.00</releaseinfo +> <abstract +> <para +>Данный модуль запоминает список сайтов, на которых произошёл сбой.</para> +</abstract> + +<keywordset> +<keyword +>KDE</keyword> +<keyword +>tdeaddons</keyword> +<keyword +>konqueror</keyword> +<keyword +>модули</keyword> +<keyword +></keyword> +</keywordset> + +</sect1info> + +<title +>Модуль сбоев</title> + +<sect2> +<title +>Использование модуля сбоев</title> + +<para +>Для использования модуля, выберите<menuchoice +><guimenu +>Сервис</guimenu +><guimenuitem +>Сбои</guimenuitem +></menuchoice +>.</para> + +</sect2> + +<sect2> +<title +>Разработчики</title> + +<para +>© 2002-2003 Alexander Kellett <email +>lypanov@kde.org</email +>.</para> +</sect2> + +</sect1> +</article> diff --git a/tde-i18n-ru/docs/tdeaddons/konq-plugins/dirfilter/Makefile.am b/tde-i18n-ru/docs/tdeaddons/konq-plugins/dirfilter/Makefile.am new file mode 100644 index 00000000000..5118c777ecc --- /dev/null +++ b/tde-i18n-ru/docs/tdeaddons/konq-plugins/dirfilter/Makefile.am @@ -0,0 +1,4 @@ +KDE_LANG = ru +SUBDIRS = $(AUTODIRS) +KDE_DOCS = konq-plugins/dirfilter +KDE_MANS = AUTO diff --git a/tde-i18n-ru/docs/tdeaddons/konq-plugins/dirfilter/Makefile.in b/tde-i18n-ru/docs/tdeaddons/konq-plugins/dirfilter/Makefile.in new file mode 100644 index 00000000000..acd073f97ed --- /dev/null +++ b/tde-i18n-ru/docs/tdeaddons/konq-plugins/dirfilter/Makefile.in @@ -0,0 +1,635 @@ +# Makefile.in generated by automake 1.10.1 from Makefile.am. +# KDE tags expanded automatically by am_edit - $Revision: 483858 $ +# @configure_input@ + +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ +VPATH = @srcdir@ +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +subdir = docs/tdeaddons/konq-plugins/dirfilter +DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ + $(top_srcdir)/configure.in +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +CONFIG_HEADER = $(top_builddir)/config.h +CONFIG_CLEAN_FILES = +SOURCES = +DIST_SOURCES = +#>- RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ +#>- html-recursive info-recursive install-data-recursive \ +#>- install-dvi-recursive install-exec-recursive \ +#>- install-html-recursive install-info-recursive \ +#>- install-pdf-recursive install-ps-recursive install-recursive \ +#>- installcheck-recursive installdirs-recursive pdf-recursive \ +#>- ps-recursive uninstall-recursive +#>+ 7 +RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ + html-recursive info-recursive install-data-recursive \ + install-dvi-recursive install-exec-recursive \ + install-html-recursive install-info-recursive \ + install-pdf-recursive install-ps-recursive install-recursive \ + installcheck-recursive installdirs-recursive pdf-recursive \ + ps-recursive uninstall-recursive nmcheck-recursive bcheck-recursive +RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ + distclean-recursive maintainer-clean-recursive +ETAGS = etags +CTAGS = ctags +DIST_SUBDIRS = $(SUBDIRS) +#>- DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +#>+ 1 +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) $(KDE_DIST) +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +ARTSCCONFIG = @ARTSCCONFIG@ +AUTOCONF = @AUTOCONF@ +AUTODIRS = @AUTODIRS@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CONF_FILES = @CONF_FILES@ +CYGPATH_W = @CYGPATH_W@ +DCOPIDL = @DCOPIDL@ +DCOPIDL2CPP = @DCOPIDL2CPP@ +DCOPIDLNG = @DCOPIDLNG@ +DCOP_DEPENDENCIES = @DCOP_DEPENDENCIES@ +DEFS = @DEFS@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +GMSGFMT = @GMSGFMT@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +KCFG_DEPENDENCIES = @KCFG_DEPENDENCIES@ +KCONFIG_COMPILER = @KCONFIG_COMPILER@ +KDECONFIG = @KDECONFIG@ +KDE_EXTRA_RPATH = @KDE_EXTRA_RPATH@ +KDE_RPATH = @KDE_RPATH@ +KDE_XSL_STYLESHEET = @KDE_XSL_STYLESHEET@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LN_S = @LN_S@ +LTLIBOBJS = @LTLIBOBJS@ +MAKEINFO = @MAKEINFO@ +MAKEKDEWIDGETS = @MAKEKDEWIDGETS@ +MCOPIDL = @MCOPIDL@ +MEINPROC = @MEINPROC@ +MKDIR_P = @MKDIR_P@ +MSGFMT = @MSGFMT@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +TOPSUBDIRS = @TOPSUBDIRS@ +VERSION = @VERSION@ +XGETTEXT = @XGETTEXT@ +XMLLINT = @XMLLINT@ +X_RPATH = @X_RPATH@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +am__leading_dot = @am__leading_dot@ +am__tar = @am__tar@ +am__untar = @am__untar@ +#>- bindir = @bindir@ +#>+ 2 +DEPDIR = .deps +bindir = @bindir@ +build_alias = @build_alias@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host_alias = @host_alias@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +kde_appsdir = @kde_appsdir@ +kde_bindir = @kde_bindir@ +kde_confdir = @kde_confdir@ +kde_datadir = @kde_datadir@ +kde_htmldir = @kde_htmldir@ +kde_icondir = @kde_icondir@ +kde_kcfgdir = @kde_kcfgdir@ +kde_libs_htmldir = @kde_libs_htmldir@ +kde_libs_prefix = @kde_libs_prefix@ +kde_locale = @kde_locale@ +kde_mimedir = @kde_mimedir@ +kde_moduledir = @kde_moduledir@ +kde_servicesdir = @kde_servicesdir@ +kde_servicetypesdir = @kde_servicetypesdir@ +kde_sounddir = @kde_sounddir@ +kde_styledir = @kde_styledir@ +kde_templatesdir = @kde_templatesdir@ +kde_wallpaperdir = @kde_wallpaperdir@ +kde_widgetdir = @kde_widgetdir@ +tdeinitdir = @tdeinitdir@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +xdg_appsdir = @xdg_appsdir@ +xdg_directorydir = @xdg_directorydir@ +xdg_menudir = @xdg_menudir@ +KDE_LANG = ru +#>- SUBDIRS = $(AUTODIRS) +#>+ 1 +SUBDIRS =. +KDE_DOCS = konq-plugins/dirfilter +KDE_MANS = AUTO +#>- all: all-recursive +#>+ 1 +all: docs-am all-recursive + +.SUFFIXES: +$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) +#>- @for dep in $?; do \ +#>- case '$(am__configure_deps)' in \ +#>- *$$dep*) \ +#>- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ +#>- && exit 0; \ +#>- exit 1;; \ +#>- esac; \ +#>- done; \ +#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/tdeaddons/konq-plugins/dirfilter/Makefile'; \ +#>- cd $(top_srcdir) && \ +#>- $(AUTOMAKE) --gnu docs/tdeaddons/konq-plugins/dirfilter/Makefile +#>+ 12 + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/tdeaddons/konq-plugins/dirfilter/Makefile'; \ + cd $(top_srcdir) && \ + $(AUTOMAKE) --gnu docs/tdeaddons/konq-plugins/dirfilter/Makefile + cd $(top_srcdir) && perl ../scripts/admin/am_edit -p../scripts/admin docs/tdeaddons/konq-plugins/dirfilter/Makefile.in +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +# This directory's subdirectories are mostly independent; you can cd +# into them and run `make' without going through this Makefile. +# To change the values of `make' variables: instead of editing Makefiles, +# (1) if the variable is set in `config.status', edit `config.status' +# (which will cause the Makefiles to be regenerated when you run `make'); +# (2) otherwise, pass the desired values on the `make' command line. +$(RECURSIVE_TARGETS): + @failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ + *=* | --[!k]*);; \ + *k*) failcom='fail=yes';; \ + esac; \ + done; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + dot_seen=yes; \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +$(RECURSIVE_CLEAN_TARGETS): + @failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ + *=* | --[!k]*);; \ + *k*) failcom='fail=yes';; \ + esac; \ + done; \ + dot_seen=no; \ + case "$@" in \ + distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ + *) list='$(SUBDIRS)' ;; \ + esac; \ + rev=''; for subdir in $$list; do \ + if test "$$subdir" = "."; then :; else \ + rev="$$subdir $$rev"; \ + fi; \ + done; \ + rev="$$rev ."; \ + target=`echo $@ | sed s/-recursive//`; \ + for subdir in $$rev; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done && test -z "$$fail" +tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + done +ctags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + done + +ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + mkid -fID $$unique +tags: TAGS + +TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ + if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ + empty_fix=.; \ + else \ + include_option=--include; \ + empty_fix=; \ + fi; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test ! -f $$subdir/TAGS || \ + tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$tags $$unique; \ + fi +ctags: CTAGS +CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + test -z "$(CTAGS_ARGS)$$tags$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$tags $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && cd $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) $$here + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + +#>- distdir: $(DISTFILES) +#>+ 1 +distdir: distdir-nls $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ + cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ + || cp -p $$d/$$file $(distdir)/$$file \ + || exit 1; \ + fi; \ + done + list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -d "$(distdir)/$$subdir" \ + || $(MKDIR_P) "$(distdir)/$$subdir" \ + || exit 1; \ + distdir=`$(am__cd) $(distdir) && pwd`; \ + top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ + (cd $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$$top_distdir" \ + distdir="$$distdir/$$subdir" \ + am__remove_distdir=: \ + am__skip_length_check=: \ + distdir) \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-recursive +all-am: Makefile +installdirs: installdirs-recursive +installdirs-am: +install: install-recursive +install-exec: install-exec-recursive +install-data: install-data-recursive +#>- uninstall: uninstall-recursive +#>+ 1 +uninstall: uninstall-docs uninstall-nls uninstall-recursive + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-recursive +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +#>- clean: clean-recursive +#>+ 1 +clean: kde-rpo-clean clean-recursive + +#>- clean-am: clean-generic mostlyclean-am +#>+ 1 +clean-am: clean-docs clean-bcheck clean-generic mostlyclean-am + +distclean: distclean-recursive + -rm -f Makefile +distclean-am: clean-am distclean-generic distclean-tags + +dvi: dvi-recursive + +dvi-am: + +html: html-recursive + +info: info-recursive + +info-am: + +#>- install-data-am: +#>+ 1 +install-data-am: install-docs install-nls + +install-dvi: install-dvi-recursive + +install-exec-am: + +install-html: install-html-recursive + +install-info: install-info-recursive + +install-man: + +install-pdf: install-pdf-recursive + +install-ps: install-ps-recursive + +installcheck-am: + +maintainer-clean: maintainer-clean-recursive + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-recursive + +mostlyclean-am: mostlyclean-generic + +pdf: pdf-recursive + +pdf-am: + +ps: ps-recursive + +ps-am: + +uninstall-am: + +.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ + install-strip + +.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ + all all-am check check-am clean clean-generic ctags \ + ctags-recursive distclean distclean-generic distclean-tags \ + distdir dvi dvi-am html html-am info info-am install \ + install-am install-data install-data-am install-dvi \ + install-dvi-am install-exec install-exec-am install-html \ + install-html-am install-info install-info-am install-man \ + install-pdf install-pdf-am install-ps install-ps-am \ + install-strip installcheck installcheck-am installdirs \ + installdirs-am maintainer-clean maintainer-clean-generic \ + mostlyclean mostlyclean-generic pdf pdf-am ps ps-am tags \ + tags-recursive uninstall uninstall-am + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: + +#>+ 2 +KDE_DIST=Makefile.in index.docbook Makefile.am index.cache.bz2 + +#>+ 24 +index.cache.bz2: $(srcdir)/index.docbook $(KDE_XSL_STYLESHEET) index.docbook + @if test -n "$(MEINPROC)"; then echo $(MEINPROC) --check --cache index.cache.bz2 $(srcdir)/index.docbook; $(MEINPROC) --check --cache index.cache.bz2 $(srcdir)/index.docbook; fi + +docs-am: index.cache.bz2 + +install-docs: docs-am install-nls + $(mkinstalldirs) $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/konq-plugins/dirfilter + @if test -f index.cache.bz2; then \ + echo $(INSTALL_DATA) index.cache.bz2 $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/konq-plugins/dirfilter/; \ + $(INSTALL_DATA) index.cache.bz2 $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/konq-plugins/dirfilter/; \ + elif test -f $(srcdir)/index.cache.bz2; then \ + echo $(INSTALL_DATA) $(srcdir)/index.cache.bz2 $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/konq-plugins/dirfilter/; \ + $(INSTALL_DATA) $(srcdir)/index.cache.bz2 $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/konq-plugins/dirfilter/; \ + fi + -rm -f $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/konq-plugins/dirfilter/common + $(LN_S) $(kde_libs_htmldir)/$(KDE_LANG)/common $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/konq-plugins/dirfilter/common + +uninstall-docs: + -rm -rf $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/konq-plugins/dirfilter + +clean-docs: + -rm -f index.cache.bz2 + + +#>+ 13 +install-nls: + $(mkinstalldirs) $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/konq-plugins/dirfilter + @for base in index.docbook ; do \ + echo $(INSTALL_DATA) $$base $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/konq-plugins/dirfilter/$$base ;\ + $(INSTALL_DATA) $(srcdir)/$$base $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/konq-plugins/dirfilter/$$base ;\ + done + +uninstall-nls: + for base in index.docbook ; do \ + rm -f $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/konq-plugins/dirfilter/$$base ;\ + done + + +#>+ 5 +distdir-nls: + for file in index.docbook ; do \ + cp $(srcdir)/$$file $(distdir); \ + done + +#>+ 15 +force-reedit: + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/tdeaddons/konq-plugins/dirfilter/Makefile'; \ + cd $(top_srcdir) && \ + $(AUTOMAKE) --gnu docs/tdeaddons/konq-plugins/dirfilter/Makefile + cd $(top_srcdir) && perl ../scripts/admin/am_edit -p../scripts/admin docs/tdeaddons/konq-plugins/dirfilter/Makefile.in + + +#>+ 21 +clean-bcheck: + rm -f *.bchecktest.cc *.bchecktest.cc.class a.out + +bcheck: bcheck-recursive + +bcheck-am: + @for i in ; do \ + if test $(srcdir)/$$i -nt $$i.bchecktest.cc; then \ + echo "int main() {return 0;}" > $$i.bchecktest.cc ; \ + echo "#include \"$$i\"" >> $$i.bchecktest.cc ; \ + echo "$$i"; \ + if ! $(CXX) $(DEFS) -I. -I$(srcdir) -I$(top_builddir) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(CXXFLAGS) $(KDE_CXXFLAGS) --dump-class-hierarchy -c $$i.bchecktest.cc; then \ + rm -f $$i.bchecktest.cc; exit 1; \ + fi ; \ + echo "" >> $$i.bchecktest.cc.class; \ + perl $(top_srcdir)/admin/bcheck.pl $$i.bchecktest.cc.class || { rm -f $$i.bchecktest.cc; exit 1; }; \ + rm -f a.out; \ + fi ; \ + done + + +#>+ 3 +final: + $(MAKE) all-am + +#>+ 3 +final-install: + $(MAKE) install-am + +#>+ 3 +no-final: + $(MAKE) all-am + +#>+ 3 +no-final-install: + $(MAKE) install-am + +#>+ 3 +kde-rpo-clean: + -rm -f *.rpo + +#>+ 3 +nmcheck: +nmcheck-am: nmcheck diff --git a/tde-i18n-ru/docs/tdeaddons/konq-plugins/dirfilter/index.cache.bz2 b/tde-i18n-ru/docs/tdeaddons/konq-plugins/dirfilter/index.cache.bz2 Binary files differnew file mode 100644 index 00000000000..8dda2f48f5d --- /dev/null +++ b/tde-i18n-ru/docs/tdeaddons/konq-plugins/dirfilter/index.cache.bz2 diff --git a/tde-i18n-ru/docs/tdeaddons/konq-plugins/dirfilter/index.docbook b/tde-i18n-ru/docs/tdeaddons/konq-plugins/dirfilter/index.docbook new file mode 100644 index 00000000000..29b8aebd7fc --- /dev/null +++ b/tde-i18n-ru/docs/tdeaddons/konq-plugins/dirfilter/index.docbook @@ -0,0 +1,97 @@ +<?xml version="1.0" ?> +<!DOCTYPE article PUBLIC "-//KDE//DTD DocBook XML V4.2-Based Variant V1.1//EN" +"dtd/kdex.dtd" [ +<!ENTITY % addindex "IGNORE"> +<!ENTITY % Russian "INCLUDE" +> <!-- change language only here --> +]> + +<article lang="&language;"> + +<sect1 id="dirfilter"> +<sect1info> + +<authorgroup> +<author +><firstname +>Gardner</firstname +> <surname +>Bell</surname +> <affiliation +><address +><email +>gbell72@rogers.com</email +></address +></affiliation> +</author> + +<othercredit role="translator" +><firstname +>Николай</firstname +><surname +>Шафоростов</surname +><affiliation +><address +><email +>shafff@ukr.net</email +></address +></affiliation +><contrib +>Перевод на русский</contrib +></othercredit +> +</authorgroup> +<date +>2004-09-15</date +> <releaseinfo +>3.10.00</releaseinfo +> <abstract +> <para +>Фильтр просмотра позволяет выбрать какиефайлы и папки выводить при навигации по файловой системе в &konqueror;.</para> +</abstract> + +<keywordset> +<keyword +>KDE</keyword> +<keyword +>tdeaddons</keyword> +<keyword +>konqueror</keyword> +<keyword +>модули</keyword> +<keyword +>dirfilter</keyword> +</keywordset> + +</sect1info> + +<title +>Фильтр просмотра</title> + +<sect2> +<title +>Использование фильтра просмотра</title> + +<para +>Для запуска модуля выберите <menuchoice +><guimenu +>Сервис</guimenu +><guimenuitem +>Фильтр</guimenuitem +></menuchoice +>. С помощью него можно будет настроить набор выводимых файлов.</para> + +</sect2> + +<sect2> +<title +>Благодарности</title> + +<para +>© 2000-2002 Dawit Alemayehu <email +>adawit@kde.org</email +>.</para> +</sect2> + +</sect1> +</article> diff --git a/tde-i18n-ru/docs/tdeaddons/konq-plugins/mediaplayer/Makefile.am b/tde-i18n-ru/docs/tdeaddons/konq-plugins/mediaplayer/Makefile.am new file mode 100644 index 00000000000..11b3f88139a --- /dev/null +++ b/tde-i18n-ru/docs/tdeaddons/konq-plugins/mediaplayer/Makefile.am @@ -0,0 +1,4 @@ +KDE_LANG = ru +SUBDIRS = $(AUTODIRS) +KDE_DOCS = konq-plugins/mediaplayer +KDE_MANS = AUTO diff --git a/tde-i18n-ru/docs/tdeaddons/konq-plugins/mediaplayer/Makefile.in b/tde-i18n-ru/docs/tdeaddons/konq-plugins/mediaplayer/Makefile.in new file mode 100644 index 00000000000..779a3d7a045 --- /dev/null +++ b/tde-i18n-ru/docs/tdeaddons/konq-plugins/mediaplayer/Makefile.in @@ -0,0 +1,635 @@ +# Makefile.in generated by automake 1.10.1 from Makefile.am. +# KDE tags expanded automatically by am_edit - $Revision: 483858 $ +# @configure_input@ + +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ +VPATH = @srcdir@ +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +subdir = docs/tdeaddons/konq-plugins/mediaplayer +DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ + $(top_srcdir)/configure.in +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +CONFIG_HEADER = $(top_builddir)/config.h +CONFIG_CLEAN_FILES = +SOURCES = +DIST_SOURCES = +#>- RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ +#>- html-recursive info-recursive install-data-recursive \ +#>- install-dvi-recursive install-exec-recursive \ +#>- install-html-recursive install-info-recursive \ +#>- install-pdf-recursive install-ps-recursive install-recursive \ +#>- installcheck-recursive installdirs-recursive pdf-recursive \ +#>- ps-recursive uninstall-recursive +#>+ 7 +RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ + html-recursive info-recursive install-data-recursive \ + install-dvi-recursive install-exec-recursive \ + install-html-recursive install-info-recursive \ + install-pdf-recursive install-ps-recursive install-recursive \ + installcheck-recursive installdirs-recursive pdf-recursive \ + ps-recursive uninstall-recursive nmcheck-recursive bcheck-recursive +RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ + distclean-recursive maintainer-clean-recursive +ETAGS = etags +CTAGS = ctags +DIST_SUBDIRS = $(SUBDIRS) +#>- DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +#>+ 1 +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) $(KDE_DIST) +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +ARTSCCONFIG = @ARTSCCONFIG@ +AUTOCONF = @AUTOCONF@ +AUTODIRS = @AUTODIRS@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CONF_FILES = @CONF_FILES@ +CYGPATH_W = @CYGPATH_W@ +DCOPIDL = @DCOPIDL@ +DCOPIDL2CPP = @DCOPIDL2CPP@ +DCOPIDLNG = @DCOPIDLNG@ +DCOP_DEPENDENCIES = @DCOP_DEPENDENCIES@ +DEFS = @DEFS@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +GMSGFMT = @GMSGFMT@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +KCFG_DEPENDENCIES = @KCFG_DEPENDENCIES@ +KCONFIG_COMPILER = @KCONFIG_COMPILER@ +KDECONFIG = @KDECONFIG@ +KDE_EXTRA_RPATH = @KDE_EXTRA_RPATH@ +KDE_RPATH = @KDE_RPATH@ +KDE_XSL_STYLESHEET = @KDE_XSL_STYLESHEET@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LN_S = @LN_S@ +LTLIBOBJS = @LTLIBOBJS@ +MAKEINFO = @MAKEINFO@ +MAKEKDEWIDGETS = @MAKEKDEWIDGETS@ +MCOPIDL = @MCOPIDL@ +MEINPROC = @MEINPROC@ +MKDIR_P = @MKDIR_P@ +MSGFMT = @MSGFMT@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +TOPSUBDIRS = @TOPSUBDIRS@ +VERSION = @VERSION@ +XGETTEXT = @XGETTEXT@ +XMLLINT = @XMLLINT@ +X_RPATH = @X_RPATH@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +am__leading_dot = @am__leading_dot@ +am__tar = @am__tar@ +am__untar = @am__untar@ +#>- bindir = @bindir@ +#>+ 2 +DEPDIR = .deps +bindir = @bindir@ +build_alias = @build_alias@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host_alias = @host_alias@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +kde_appsdir = @kde_appsdir@ +kde_bindir = @kde_bindir@ +kde_confdir = @kde_confdir@ +kde_datadir = @kde_datadir@ +kde_htmldir = @kde_htmldir@ +kde_icondir = @kde_icondir@ +kde_kcfgdir = @kde_kcfgdir@ +kde_libs_htmldir = @kde_libs_htmldir@ +kde_libs_prefix = @kde_libs_prefix@ +kde_locale = @kde_locale@ +kde_mimedir = @kde_mimedir@ +kde_moduledir = @kde_moduledir@ +kde_servicesdir = @kde_servicesdir@ +kde_servicetypesdir = @kde_servicetypesdir@ +kde_sounddir = @kde_sounddir@ +kde_styledir = @kde_styledir@ +kde_templatesdir = @kde_templatesdir@ +kde_wallpaperdir = @kde_wallpaperdir@ +kde_widgetdir = @kde_widgetdir@ +tdeinitdir = @tdeinitdir@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +xdg_appsdir = @xdg_appsdir@ +xdg_directorydir = @xdg_directorydir@ +xdg_menudir = @xdg_menudir@ +KDE_LANG = ru +#>- SUBDIRS = $(AUTODIRS) +#>+ 1 +SUBDIRS =. +KDE_DOCS = konq-plugins/mediaplayer +KDE_MANS = AUTO +#>- all: all-recursive +#>+ 1 +all: docs-am all-recursive + +.SUFFIXES: +$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) +#>- @for dep in $?; do \ +#>- case '$(am__configure_deps)' in \ +#>- *$$dep*) \ +#>- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ +#>- && exit 0; \ +#>- exit 1;; \ +#>- esac; \ +#>- done; \ +#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/tdeaddons/konq-plugins/mediaplayer/Makefile'; \ +#>- cd $(top_srcdir) && \ +#>- $(AUTOMAKE) --gnu docs/tdeaddons/konq-plugins/mediaplayer/Makefile +#>+ 12 + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/tdeaddons/konq-plugins/mediaplayer/Makefile'; \ + cd $(top_srcdir) && \ + $(AUTOMAKE) --gnu docs/tdeaddons/konq-plugins/mediaplayer/Makefile + cd $(top_srcdir) && perl ../scripts/admin/am_edit -p../scripts/admin docs/tdeaddons/konq-plugins/mediaplayer/Makefile.in +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +# This directory's subdirectories are mostly independent; you can cd +# into them and run `make' without going through this Makefile. +# To change the values of `make' variables: instead of editing Makefiles, +# (1) if the variable is set in `config.status', edit `config.status' +# (which will cause the Makefiles to be regenerated when you run `make'); +# (2) otherwise, pass the desired values on the `make' command line. +$(RECURSIVE_TARGETS): + @failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ + *=* | --[!k]*);; \ + *k*) failcom='fail=yes';; \ + esac; \ + done; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + dot_seen=yes; \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +$(RECURSIVE_CLEAN_TARGETS): + @failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ + *=* | --[!k]*);; \ + *k*) failcom='fail=yes';; \ + esac; \ + done; \ + dot_seen=no; \ + case "$@" in \ + distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ + *) list='$(SUBDIRS)' ;; \ + esac; \ + rev=''; for subdir in $$list; do \ + if test "$$subdir" = "."; then :; else \ + rev="$$subdir $$rev"; \ + fi; \ + done; \ + rev="$$rev ."; \ + target=`echo $@ | sed s/-recursive//`; \ + for subdir in $$rev; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done && test -z "$$fail" +tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + done +ctags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + done + +ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + mkid -fID $$unique +tags: TAGS + +TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ + if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ + empty_fix=.; \ + else \ + include_option=--include; \ + empty_fix=; \ + fi; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test ! -f $$subdir/TAGS || \ + tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$tags $$unique; \ + fi +ctags: CTAGS +CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + test -z "$(CTAGS_ARGS)$$tags$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$tags $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && cd $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) $$here + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + +#>- distdir: $(DISTFILES) +#>+ 1 +distdir: distdir-nls $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ + cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ + || cp -p $$d/$$file $(distdir)/$$file \ + || exit 1; \ + fi; \ + done + list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -d "$(distdir)/$$subdir" \ + || $(MKDIR_P) "$(distdir)/$$subdir" \ + || exit 1; \ + distdir=`$(am__cd) $(distdir) && pwd`; \ + top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ + (cd $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$$top_distdir" \ + distdir="$$distdir/$$subdir" \ + am__remove_distdir=: \ + am__skip_length_check=: \ + distdir) \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-recursive +all-am: Makefile +installdirs: installdirs-recursive +installdirs-am: +install: install-recursive +install-exec: install-exec-recursive +install-data: install-data-recursive +#>- uninstall: uninstall-recursive +#>+ 1 +uninstall: uninstall-docs uninstall-nls uninstall-recursive + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-recursive +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +#>- clean: clean-recursive +#>+ 1 +clean: kde-rpo-clean clean-recursive + +#>- clean-am: clean-generic mostlyclean-am +#>+ 1 +clean-am: clean-docs clean-bcheck clean-generic mostlyclean-am + +distclean: distclean-recursive + -rm -f Makefile +distclean-am: clean-am distclean-generic distclean-tags + +dvi: dvi-recursive + +dvi-am: + +html: html-recursive + +info: info-recursive + +info-am: + +#>- install-data-am: +#>+ 1 +install-data-am: install-docs install-nls + +install-dvi: install-dvi-recursive + +install-exec-am: + +install-html: install-html-recursive + +install-info: install-info-recursive + +install-man: + +install-pdf: install-pdf-recursive + +install-ps: install-ps-recursive + +installcheck-am: + +maintainer-clean: maintainer-clean-recursive + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-recursive + +mostlyclean-am: mostlyclean-generic + +pdf: pdf-recursive + +pdf-am: + +ps: ps-recursive + +ps-am: + +uninstall-am: + +.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ + install-strip + +.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ + all all-am check check-am clean clean-generic ctags \ + ctags-recursive distclean distclean-generic distclean-tags \ + distdir dvi dvi-am html html-am info info-am install \ + install-am install-data install-data-am install-dvi \ + install-dvi-am install-exec install-exec-am install-html \ + install-html-am install-info install-info-am install-man \ + install-pdf install-pdf-am install-ps install-ps-am \ + install-strip installcheck installcheck-am installdirs \ + installdirs-am maintainer-clean maintainer-clean-generic \ + mostlyclean mostlyclean-generic pdf pdf-am ps ps-am tags \ + tags-recursive uninstall uninstall-am + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: + +#>+ 2 +KDE_DIST=Makefile.in index.docbook Makefile.am index.cache.bz2 + +#>+ 24 +index.cache.bz2: $(srcdir)/index.docbook $(KDE_XSL_STYLESHEET) index.docbook + @if test -n "$(MEINPROC)"; then echo $(MEINPROC) --check --cache index.cache.bz2 $(srcdir)/index.docbook; $(MEINPROC) --check --cache index.cache.bz2 $(srcdir)/index.docbook; fi + +docs-am: index.cache.bz2 + +install-docs: docs-am install-nls + $(mkinstalldirs) $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/konq-plugins/mediaplayer + @if test -f index.cache.bz2; then \ + echo $(INSTALL_DATA) index.cache.bz2 $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/konq-plugins/mediaplayer/; \ + $(INSTALL_DATA) index.cache.bz2 $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/konq-plugins/mediaplayer/; \ + elif test -f $(srcdir)/index.cache.bz2; then \ + echo $(INSTALL_DATA) $(srcdir)/index.cache.bz2 $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/konq-plugins/mediaplayer/; \ + $(INSTALL_DATA) $(srcdir)/index.cache.bz2 $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/konq-plugins/mediaplayer/; \ + fi + -rm -f $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/konq-plugins/mediaplayer/common + $(LN_S) $(kde_libs_htmldir)/$(KDE_LANG)/common $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/konq-plugins/mediaplayer/common + +uninstall-docs: + -rm -rf $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/konq-plugins/mediaplayer + +clean-docs: + -rm -f index.cache.bz2 + + +#>+ 13 +install-nls: + $(mkinstalldirs) $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/konq-plugins/mediaplayer + @for base in index.docbook ; do \ + echo $(INSTALL_DATA) $$base $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/konq-plugins/mediaplayer/$$base ;\ + $(INSTALL_DATA) $(srcdir)/$$base $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/konq-plugins/mediaplayer/$$base ;\ + done + +uninstall-nls: + for base in index.docbook ; do \ + rm -f $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/konq-plugins/mediaplayer/$$base ;\ + done + + +#>+ 5 +distdir-nls: + for file in index.docbook ; do \ + cp $(srcdir)/$$file $(distdir); \ + done + +#>+ 15 +force-reedit: + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/tdeaddons/konq-plugins/mediaplayer/Makefile'; \ + cd $(top_srcdir) && \ + $(AUTOMAKE) --gnu docs/tdeaddons/konq-plugins/mediaplayer/Makefile + cd $(top_srcdir) && perl ../scripts/admin/am_edit -p../scripts/admin docs/tdeaddons/konq-plugins/mediaplayer/Makefile.in + + +#>+ 21 +clean-bcheck: + rm -f *.bchecktest.cc *.bchecktest.cc.class a.out + +bcheck: bcheck-recursive + +bcheck-am: + @for i in ; do \ + if test $(srcdir)/$$i -nt $$i.bchecktest.cc; then \ + echo "int main() {return 0;}" > $$i.bchecktest.cc ; \ + echo "#include \"$$i\"" >> $$i.bchecktest.cc ; \ + echo "$$i"; \ + if ! $(CXX) $(DEFS) -I. -I$(srcdir) -I$(top_builddir) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(CXXFLAGS) $(KDE_CXXFLAGS) --dump-class-hierarchy -c $$i.bchecktest.cc; then \ + rm -f $$i.bchecktest.cc; exit 1; \ + fi ; \ + echo "" >> $$i.bchecktest.cc.class; \ + perl $(top_srcdir)/admin/bcheck.pl $$i.bchecktest.cc.class || { rm -f $$i.bchecktest.cc; exit 1; }; \ + rm -f a.out; \ + fi ; \ + done + + +#>+ 3 +final: + $(MAKE) all-am + +#>+ 3 +final-install: + $(MAKE) install-am + +#>+ 3 +no-final: + $(MAKE) all-am + +#>+ 3 +no-final-install: + $(MAKE) install-am + +#>+ 3 +kde-rpo-clean: + -rm -f *.rpo + +#>+ 3 +nmcheck: +nmcheck-am: nmcheck diff --git a/tde-i18n-ru/docs/tdeaddons/konq-plugins/mediaplayer/index.cache.bz2 b/tde-i18n-ru/docs/tdeaddons/konq-plugins/mediaplayer/index.cache.bz2 Binary files differnew file mode 100644 index 00000000000..1cb6ee0f5ad --- /dev/null +++ b/tde-i18n-ru/docs/tdeaddons/konq-plugins/mediaplayer/index.cache.bz2 diff --git a/tde-i18n-ru/docs/tdeaddons/konq-plugins/mediaplayer/index.docbook b/tde-i18n-ru/docs/tdeaddons/konq-plugins/mediaplayer/index.docbook new file mode 100644 index 00000000000..2bc53ddbc98 --- /dev/null +++ b/tde-i18n-ru/docs/tdeaddons/konq-plugins/mediaplayer/index.docbook @@ -0,0 +1,107 @@ +<?xml version="1.0" ?> +<!DOCTYPE article PUBLIC "-//KDE//DTD DocBook XML V4.2-Based Variant V1.1//EN" +"dtd/kdex.dtd" [ +<!ENTITY % addindex "IGNORE"> +<!ENTITY % Russian "INCLUDE" +> <!-- change language only here --> +]> + +<article lang="&language;"> + +<sect1 id="sidebar-mediaplayer"> +<sect1info> + +<authorgroup> +<author +><firstname +>Gardner</firstname +> <surname +>Bell</surname +> <affiliation +><address +><email +>gbell72@rogers.com</email +></address +></affiliation> +</author> + +<othercredit role="translator" +><firstname +>Николай</firstname +><surname +>Шафоростов</surname +><affiliation +><address +><email +>shafff@ukr.net</email +></address +></affiliation +><contrib +>Перевод на русский</contrib +></othercredit +> +</authorgroup> +<date +>2004-09-09</date +> <releaseinfo +>3.10.00</releaseinfo +> <abstract +> <para +>Проигрыватель боковой панели позволяет слушать звуковые файлы прямо в &konqueror;.</para> +</abstract> + +<keywordset> +<keyword +>KDE</keyword> +<keyword +>tdeaddons</keyword> +<keyword +>konqueror</keyword> +<keyword +>модули</keyword> +<keyword +>Проигрыватель боковой панели</keyword> +</keywordset> + +</sect1info> + +<title +>Проигрыватель боковой панели</title> + +<sect2> +<title +>Проигрыватель боковой панели</title> + +<para +>Для запуска проигрывателя, выберите <menuchoice +><guimenu +>Окно</guimenu +><guimenuitem +>Показать Панель навигации</guimenuitem +></menuchoice +> или нажмите <keycap +>F9</keycap +>.</para> + +<para +>Щёлкните на значке <inlinemediaobject +><imageobject +><imagedata fileref="cr22-app-konqsidebar_mediaplayer.png" format="PNG" width="22"/></imageobject +></inlinemediaobject +> на панели и перенесите файлы на проигрыватель.</para +> + +</sect2> + +<sect2> +<title +>Благодарности</title> + +<para +>© 2001 Joseph Wenninger <email +>jowenn@kde.org</email +>.</para> +</sect2> + +</sect1> +</article> diff --git a/tde-i18n-ru/docs/tdeaddons/konq-plugins/uachanger/Makefile.am b/tde-i18n-ru/docs/tdeaddons/konq-plugins/uachanger/Makefile.am new file mode 100644 index 00000000000..dad71ef22db --- /dev/null +++ b/tde-i18n-ru/docs/tdeaddons/konq-plugins/uachanger/Makefile.am @@ -0,0 +1,4 @@ +KDE_LANG = ru +SUBDIRS = $(AUTODIRS) +KDE_DOCS = konq-plugins/uachanger +KDE_MANS = AUTO diff --git a/tde-i18n-ru/docs/tdeaddons/konq-plugins/uachanger/Makefile.in b/tde-i18n-ru/docs/tdeaddons/konq-plugins/uachanger/Makefile.in new file mode 100644 index 00000000000..ed988746421 --- /dev/null +++ b/tde-i18n-ru/docs/tdeaddons/konq-plugins/uachanger/Makefile.in @@ -0,0 +1,635 @@ +# Makefile.in generated by automake 1.10.1 from Makefile.am. +# KDE tags expanded automatically by am_edit - $Revision: 483858 $ +# @configure_input@ + +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ +VPATH = @srcdir@ +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +subdir = docs/tdeaddons/konq-plugins/uachanger +DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ + $(top_srcdir)/configure.in +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +CONFIG_HEADER = $(top_builddir)/config.h +CONFIG_CLEAN_FILES = +SOURCES = +DIST_SOURCES = +#>- RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ +#>- html-recursive info-recursive install-data-recursive \ +#>- install-dvi-recursive install-exec-recursive \ +#>- install-html-recursive install-info-recursive \ +#>- install-pdf-recursive install-ps-recursive install-recursive \ +#>- installcheck-recursive installdirs-recursive pdf-recursive \ +#>- ps-recursive uninstall-recursive +#>+ 7 +RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ + html-recursive info-recursive install-data-recursive \ + install-dvi-recursive install-exec-recursive \ + install-html-recursive install-info-recursive \ + install-pdf-recursive install-ps-recursive install-recursive \ + installcheck-recursive installdirs-recursive pdf-recursive \ + ps-recursive uninstall-recursive nmcheck-recursive bcheck-recursive +RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ + distclean-recursive maintainer-clean-recursive +ETAGS = etags +CTAGS = ctags +DIST_SUBDIRS = $(SUBDIRS) +#>- DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +#>+ 1 +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) $(KDE_DIST) +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +ARTSCCONFIG = @ARTSCCONFIG@ +AUTOCONF = @AUTOCONF@ +AUTODIRS = @AUTODIRS@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CONF_FILES = @CONF_FILES@ +CYGPATH_W = @CYGPATH_W@ +DCOPIDL = @DCOPIDL@ +DCOPIDL2CPP = @DCOPIDL2CPP@ +DCOPIDLNG = @DCOPIDLNG@ +DCOP_DEPENDENCIES = @DCOP_DEPENDENCIES@ +DEFS = @DEFS@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +GMSGFMT = @GMSGFMT@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +KCFG_DEPENDENCIES = @KCFG_DEPENDENCIES@ +KCONFIG_COMPILER = @KCONFIG_COMPILER@ +KDECONFIG = @KDECONFIG@ +KDE_EXTRA_RPATH = @KDE_EXTRA_RPATH@ +KDE_RPATH = @KDE_RPATH@ +KDE_XSL_STYLESHEET = @KDE_XSL_STYLESHEET@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LN_S = @LN_S@ +LTLIBOBJS = @LTLIBOBJS@ +MAKEINFO = @MAKEINFO@ +MAKEKDEWIDGETS = @MAKEKDEWIDGETS@ +MCOPIDL = @MCOPIDL@ +MEINPROC = @MEINPROC@ +MKDIR_P = @MKDIR_P@ +MSGFMT = @MSGFMT@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +TOPSUBDIRS = @TOPSUBDIRS@ +VERSION = @VERSION@ +XGETTEXT = @XGETTEXT@ +XMLLINT = @XMLLINT@ +X_RPATH = @X_RPATH@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +am__leading_dot = @am__leading_dot@ +am__tar = @am__tar@ +am__untar = @am__untar@ +#>- bindir = @bindir@ +#>+ 2 +DEPDIR = .deps +bindir = @bindir@ +build_alias = @build_alias@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host_alias = @host_alias@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +kde_appsdir = @kde_appsdir@ +kde_bindir = @kde_bindir@ +kde_confdir = @kde_confdir@ +kde_datadir = @kde_datadir@ +kde_htmldir = @kde_htmldir@ +kde_icondir = @kde_icondir@ +kde_kcfgdir = @kde_kcfgdir@ +kde_libs_htmldir = @kde_libs_htmldir@ +kde_libs_prefix = @kde_libs_prefix@ +kde_locale = @kde_locale@ +kde_mimedir = @kde_mimedir@ +kde_moduledir = @kde_moduledir@ +kde_servicesdir = @kde_servicesdir@ +kde_servicetypesdir = @kde_servicetypesdir@ +kde_sounddir = @kde_sounddir@ +kde_styledir = @kde_styledir@ +kde_templatesdir = @kde_templatesdir@ +kde_wallpaperdir = @kde_wallpaperdir@ +kde_widgetdir = @kde_widgetdir@ +tdeinitdir = @tdeinitdir@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +xdg_appsdir = @xdg_appsdir@ +xdg_directorydir = @xdg_directorydir@ +xdg_menudir = @xdg_menudir@ +KDE_LANG = ru +#>- SUBDIRS = $(AUTODIRS) +#>+ 1 +SUBDIRS =. +KDE_DOCS = konq-plugins/uachanger +KDE_MANS = AUTO +#>- all: all-recursive +#>+ 1 +all: docs-am all-recursive + +.SUFFIXES: +$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) +#>- @for dep in $?; do \ +#>- case '$(am__configure_deps)' in \ +#>- *$$dep*) \ +#>- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ +#>- && exit 0; \ +#>- exit 1;; \ +#>- esac; \ +#>- done; \ +#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/tdeaddons/konq-plugins/uachanger/Makefile'; \ +#>- cd $(top_srcdir) && \ +#>- $(AUTOMAKE) --gnu docs/tdeaddons/konq-plugins/uachanger/Makefile +#>+ 12 + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/tdeaddons/konq-plugins/uachanger/Makefile'; \ + cd $(top_srcdir) && \ + $(AUTOMAKE) --gnu docs/tdeaddons/konq-plugins/uachanger/Makefile + cd $(top_srcdir) && perl ../scripts/admin/am_edit -p../scripts/admin docs/tdeaddons/konq-plugins/uachanger/Makefile.in +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +# This directory's subdirectories are mostly independent; you can cd +# into them and run `make' without going through this Makefile. +# To change the values of `make' variables: instead of editing Makefiles, +# (1) if the variable is set in `config.status', edit `config.status' +# (which will cause the Makefiles to be regenerated when you run `make'); +# (2) otherwise, pass the desired values on the `make' command line. +$(RECURSIVE_TARGETS): + @failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ + *=* | --[!k]*);; \ + *k*) failcom='fail=yes';; \ + esac; \ + done; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + dot_seen=yes; \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +$(RECURSIVE_CLEAN_TARGETS): + @failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ + *=* | --[!k]*);; \ + *k*) failcom='fail=yes';; \ + esac; \ + done; \ + dot_seen=no; \ + case "$@" in \ + distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ + *) list='$(SUBDIRS)' ;; \ + esac; \ + rev=''; for subdir in $$list; do \ + if test "$$subdir" = "."; then :; else \ + rev="$$subdir $$rev"; \ + fi; \ + done; \ + rev="$$rev ."; \ + target=`echo $@ | sed s/-recursive//`; \ + for subdir in $$rev; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done && test -z "$$fail" +tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + done +ctags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + done + +ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + mkid -fID $$unique +tags: TAGS + +TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ + if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ + empty_fix=.; \ + else \ + include_option=--include; \ + empty_fix=; \ + fi; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test ! -f $$subdir/TAGS || \ + tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$tags $$unique; \ + fi +ctags: CTAGS +CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + test -z "$(CTAGS_ARGS)$$tags$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$tags $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && cd $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) $$here + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + +#>- distdir: $(DISTFILES) +#>+ 1 +distdir: distdir-nls $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ + cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ + || cp -p $$d/$$file $(distdir)/$$file \ + || exit 1; \ + fi; \ + done + list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -d "$(distdir)/$$subdir" \ + || $(MKDIR_P) "$(distdir)/$$subdir" \ + || exit 1; \ + distdir=`$(am__cd) $(distdir) && pwd`; \ + top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ + (cd $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$$top_distdir" \ + distdir="$$distdir/$$subdir" \ + am__remove_distdir=: \ + am__skip_length_check=: \ + distdir) \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-recursive +all-am: Makefile +installdirs: installdirs-recursive +installdirs-am: +install: install-recursive +install-exec: install-exec-recursive +install-data: install-data-recursive +#>- uninstall: uninstall-recursive +#>+ 1 +uninstall: uninstall-docs uninstall-nls uninstall-recursive + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-recursive +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +#>- clean: clean-recursive +#>+ 1 +clean: kde-rpo-clean clean-recursive + +#>- clean-am: clean-generic mostlyclean-am +#>+ 1 +clean-am: clean-docs clean-bcheck clean-generic mostlyclean-am + +distclean: distclean-recursive + -rm -f Makefile +distclean-am: clean-am distclean-generic distclean-tags + +dvi: dvi-recursive + +dvi-am: + +html: html-recursive + +info: info-recursive + +info-am: + +#>- install-data-am: +#>+ 1 +install-data-am: install-docs install-nls + +install-dvi: install-dvi-recursive + +install-exec-am: + +install-html: install-html-recursive + +install-info: install-info-recursive + +install-man: + +install-pdf: install-pdf-recursive + +install-ps: install-ps-recursive + +installcheck-am: + +maintainer-clean: maintainer-clean-recursive + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-recursive + +mostlyclean-am: mostlyclean-generic + +pdf: pdf-recursive + +pdf-am: + +ps: ps-recursive + +ps-am: + +uninstall-am: + +.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ + install-strip + +.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ + all all-am check check-am clean clean-generic ctags \ + ctags-recursive distclean distclean-generic distclean-tags \ + distdir dvi dvi-am html html-am info info-am install \ + install-am install-data install-data-am install-dvi \ + install-dvi-am install-exec install-exec-am install-html \ + install-html-am install-info install-info-am install-man \ + install-pdf install-pdf-am install-ps install-ps-am \ + install-strip installcheck installcheck-am installdirs \ + installdirs-am maintainer-clean maintainer-clean-generic \ + mostlyclean mostlyclean-generic pdf pdf-am ps ps-am tags \ + tags-recursive uninstall uninstall-am + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: + +#>+ 2 +KDE_DIST=Makefile.in index.docbook Makefile.am index.cache.bz2 + +#>+ 24 +index.cache.bz2: $(srcdir)/index.docbook $(KDE_XSL_STYLESHEET) index.docbook + @if test -n "$(MEINPROC)"; then echo $(MEINPROC) --check --cache index.cache.bz2 $(srcdir)/index.docbook; $(MEINPROC) --check --cache index.cache.bz2 $(srcdir)/index.docbook; fi + +docs-am: index.cache.bz2 + +install-docs: docs-am install-nls + $(mkinstalldirs) $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/konq-plugins/uachanger + @if test -f index.cache.bz2; then \ + echo $(INSTALL_DATA) index.cache.bz2 $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/konq-plugins/uachanger/; \ + $(INSTALL_DATA) index.cache.bz2 $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/konq-plugins/uachanger/; \ + elif test -f $(srcdir)/index.cache.bz2; then \ + echo $(INSTALL_DATA) $(srcdir)/index.cache.bz2 $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/konq-plugins/uachanger/; \ + $(INSTALL_DATA) $(srcdir)/index.cache.bz2 $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/konq-plugins/uachanger/; \ + fi + -rm -f $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/konq-plugins/uachanger/common + $(LN_S) $(kde_libs_htmldir)/$(KDE_LANG)/common $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/konq-plugins/uachanger/common + +uninstall-docs: + -rm -rf $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/konq-plugins/uachanger + +clean-docs: + -rm -f index.cache.bz2 + + +#>+ 13 +install-nls: + $(mkinstalldirs) $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/konq-plugins/uachanger + @for base in index.docbook ; do \ + echo $(INSTALL_DATA) $$base $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/konq-plugins/uachanger/$$base ;\ + $(INSTALL_DATA) $(srcdir)/$$base $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/konq-plugins/uachanger/$$base ;\ + done + +uninstall-nls: + for base in index.docbook ; do \ + rm -f $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/konq-plugins/uachanger/$$base ;\ + done + + +#>+ 5 +distdir-nls: + for file in index.docbook ; do \ + cp $(srcdir)/$$file $(distdir); \ + done + +#>+ 15 +force-reedit: + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/tdeaddons/konq-plugins/uachanger/Makefile'; \ + cd $(top_srcdir) && \ + $(AUTOMAKE) --gnu docs/tdeaddons/konq-plugins/uachanger/Makefile + cd $(top_srcdir) && perl ../scripts/admin/am_edit -p../scripts/admin docs/tdeaddons/konq-plugins/uachanger/Makefile.in + + +#>+ 21 +clean-bcheck: + rm -f *.bchecktest.cc *.bchecktest.cc.class a.out + +bcheck: bcheck-recursive + +bcheck-am: + @for i in ; do \ + if test $(srcdir)/$$i -nt $$i.bchecktest.cc; then \ + echo "int main() {return 0;}" > $$i.bchecktest.cc ; \ + echo "#include \"$$i\"" >> $$i.bchecktest.cc ; \ + echo "$$i"; \ + if ! $(CXX) $(DEFS) -I. -I$(srcdir) -I$(top_builddir) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(CXXFLAGS) $(KDE_CXXFLAGS) --dump-class-hierarchy -c $$i.bchecktest.cc; then \ + rm -f $$i.bchecktest.cc; exit 1; \ + fi ; \ + echo "" >> $$i.bchecktest.cc.class; \ + perl $(top_srcdir)/admin/bcheck.pl $$i.bchecktest.cc.class || { rm -f $$i.bchecktest.cc; exit 1; }; \ + rm -f a.out; \ + fi ; \ + done + + +#>+ 3 +final: + $(MAKE) all-am + +#>+ 3 +final-install: + $(MAKE) install-am + +#>+ 3 +no-final: + $(MAKE) all-am + +#>+ 3 +no-final-install: + $(MAKE) install-am + +#>+ 3 +kde-rpo-clean: + -rm -f *.rpo + +#>+ 3 +nmcheck: +nmcheck-am: nmcheck diff --git a/tde-i18n-ru/docs/tdeaddons/konq-plugins/uachanger/index.cache.bz2 b/tde-i18n-ru/docs/tdeaddons/konq-plugins/uachanger/index.cache.bz2 Binary files differnew file mode 100644 index 00000000000..e9fc7ec73dc --- /dev/null +++ b/tde-i18n-ru/docs/tdeaddons/konq-plugins/uachanger/index.cache.bz2 diff --git a/tde-i18n-ru/docs/tdeaddons/konq-plugins/uachanger/index.docbook b/tde-i18n-ru/docs/tdeaddons/konq-plugins/uachanger/index.docbook new file mode 100644 index 00000000000..488df6a469d --- /dev/null +++ b/tde-i18n-ru/docs/tdeaddons/konq-plugins/uachanger/index.docbook @@ -0,0 +1,185 @@ +<?xml version="1.0" ?> +<!DOCTYPE article PUBLIC "-//KDE//DTD DocBook XML V4.2-Based Variant V1.1//EN" +"dtd/kdex.dtd" [ +<!ENTITY % addindex "IGNORE"> +<!ENTITY % Russian "INCLUDE" +> <!-- change language only here --> +]> + +<article lang="&language;"> + +<sect1 id="uachanger"> +<sect1info> + +<authorgroup> +<author +><firstname +>Gardner</firstname +> <surname +>Bell</surname +> <affiliation +><address +><email +>gbell72@rogers.com</email +></address +></affiliation> +</author> + +<othercredit role="translator" +><firstname +>Николай</firstname +><surname +>Шафоростов</surname +><affiliation +><address +><email +>shafff@ukr.net</email +></address +></affiliation +><contrib +>Перевод на русский</contrib +></othercredit +> +</authorgroup> +<date +>2004-07-13</date +> <releaseinfo +>3.10.00</releaseinfo +> <abstract +> <para +>Модуль добавляет в &konqueror; меню, позволяющее быстро изменять для каждого домена содержание строки User-Agent, которая передаётся серверу и должна содержать сведения об операционной системе и браузере пользователя. Это может пригодиться когда сервер не выдаёт данные пользователям, отказавшимся от Internet Explorer.</para> +</abstract> + +<keywordset> +<keyword +>KDE</keyword> +<keyword +>tdeaddons</keyword> +<keyword +>konqueror</keyword> +<keyword +>модули</keyword> +<keyword +>uachanger</keyword> +</keywordset> + +</sect1info> + +<title +>Смена идентификационной строки браузера</title> + +<sect2> +<title +>Смена идентификационной строки браузера</title> + +<para +>Доступ к модуля можно получить через меню<menuchoice +><guimenu +>Сервис</guimenu +><guimenuitem +>Изменить строку описания браузера</guimenuitem +></menuchoice +></para> +<!-- ************************************ --> +<!-- We probably need an entity for Mozilla, and I should check about --> +<!-- trademark stuff for the MS browsers (Phil)--> +<!-- ************************************ --> +<variablelist> +<varlistentry> +<term +><guimenuitem +>Идентификация по умолчанию</guimenuitem +></term> +<listitem +><para +>Стандартная строка User-Agent для &konqueror; -Mozilla/5.0(compatible;Konqueror/3.3)(KHTML, like Gecko).</para +></listitem> +</varlistentry> + +<varlistentry> +<term +><guimenuitem +>Internet Explorer</guimenuitem +></term> +<listitem +><para +>Большинство сайтов, ограничивающие доступ по идентификационной строке, пропускают только MSIE, запрещая доступ для остальных браузеров (большинство из которых указывают <application +>Mozilla</application +> в строке).</para +></listitem> +</varlistentry> + +<varlistentry> +<term +><guimenuitem +>Mozilla</guimenuitem +></term> +<listitem +><para +>Если вы хотите влиять на статистику в пользу <application +>Mozilla</application +>, можете выбрать версии от 1.2.1 до 1.6</para +></listitem> +</varlistentry> + +<varlistentry> +<term +><guimenuitem +>Netscape Navigator</guimenuitem +></term> +<listitem +><para +>Могут быть случаи, когда сервер может выдавать два варианта страниц - сделанные по "стандартам" Microsoft и упрощёные их варианты, в зависимости от новизны браузеров, в таком случае попробуйте выбрать этот вариант.</para +></listitem> +</varlistentry> + +<varlistentry> +<term +><guimenuitem +>Другие</guimenuitem +></term> +<listitem +><para +>Экзотические браузеры.</para +></listitem> +</varlistentry> + +<varlistentry> +<term +><guimenuitem +>Применить ко всему сайту</guimenuitem +></term> +<listitem +><para +>посылать выбранную строку идентификации при посещении всех страниц текущего сайта.</para +></listitem> +</varlistentry> + +<varlistentry> +<term +><guimenuitem +>Настройка</guimenuitem +></term> +<listitem +><para +>Пункт меню <guimenuitem +>Настройка</guimenuitem +> позволяет настроить количество вариантов идентификационных строк.</para +></listitem> +</varlistentry> +</variablelist> + +</sect2> + +<sect2> +<title +>Авторы</title> + +<para +>© 2001 Dawit Alemayehu. <email +>adawit@kde.org</email +></para> +</sect2> + +</sect1> +</article> diff --git a/tde-i18n-ru/docs/tdeaddons/konq-plugins/webarchiver/Makefile.am b/tde-i18n-ru/docs/tdeaddons/konq-plugins/webarchiver/Makefile.am new file mode 100644 index 00000000000..8d946995f40 --- /dev/null +++ b/tde-i18n-ru/docs/tdeaddons/konq-plugins/webarchiver/Makefile.am @@ -0,0 +1,4 @@ +KDE_LANG = ru +SUBDIRS = $(AUTODIRS) +KDE_DOCS = konq-plugins/webarchiver +KDE_MANS = AUTO diff --git a/tde-i18n-ru/docs/tdeaddons/konq-plugins/webarchiver/Makefile.in b/tde-i18n-ru/docs/tdeaddons/konq-plugins/webarchiver/Makefile.in new file mode 100644 index 00000000000..859cf393da6 --- /dev/null +++ b/tde-i18n-ru/docs/tdeaddons/konq-plugins/webarchiver/Makefile.in @@ -0,0 +1,635 @@ +# Makefile.in generated by automake 1.10.1 from Makefile.am. +# KDE tags expanded automatically by am_edit - $Revision: 483858 $ +# @configure_input@ + +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ +VPATH = @srcdir@ +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +subdir = docs/tdeaddons/konq-plugins/webarchiver +DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ + $(top_srcdir)/configure.in +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +CONFIG_HEADER = $(top_builddir)/config.h +CONFIG_CLEAN_FILES = +SOURCES = +DIST_SOURCES = +#>- RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ +#>- html-recursive info-recursive install-data-recursive \ +#>- install-dvi-recursive install-exec-recursive \ +#>- install-html-recursive install-info-recursive \ +#>- install-pdf-recursive install-ps-recursive install-recursive \ +#>- installcheck-recursive installdirs-recursive pdf-recursive \ +#>- ps-recursive uninstall-recursive +#>+ 7 +RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ + html-recursive info-recursive install-data-recursive \ + install-dvi-recursive install-exec-recursive \ + install-html-recursive install-info-recursive \ + install-pdf-recursive install-ps-recursive install-recursive \ + installcheck-recursive installdirs-recursive pdf-recursive \ + ps-recursive uninstall-recursive nmcheck-recursive bcheck-recursive +RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ + distclean-recursive maintainer-clean-recursive +ETAGS = etags +CTAGS = ctags +DIST_SUBDIRS = $(SUBDIRS) +#>- DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +#>+ 1 +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) $(KDE_DIST) +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +ARTSCCONFIG = @ARTSCCONFIG@ +AUTOCONF = @AUTOCONF@ +AUTODIRS = @AUTODIRS@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CONF_FILES = @CONF_FILES@ +CYGPATH_W = @CYGPATH_W@ +DCOPIDL = @DCOPIDL@ +DCOPIDL2CPP = @DCOPIDL2CPP@ +DCOPIDLNG = @DCOPIDLNG@ +DCOP_DEPENDENCIES = @DCOP_DEPENDENCIES@ +DEFS = @DEFS@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +GMSGFMT = @GMSGFMT@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +KCFG_DEPENDENCIES = @KCFG_DEPENDENCIES@ +KCONFIG_COMPILER = @KCONFIG_COMPILER@ +KDECONFIG = @KDECONFIG@ +KDE_EXTRA_RPATH = @KDE_EXTRA_RPATH@ +KDE_RPATH = @KDE_RPATH@ +KDE_XSL_STYLESHEET = @KDE_XSL_STYLESHEET@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LN_S = @LN_S@ +LTLIBOBJS = @LTLIBOBJS@ +MAKEINFO = @MAKEINFO@ +MAKEKDEWIDGETS = @MAKEKDEWIDGETS@ +MCOPIDL = @MCOPIDL@ +MEINPROC = @MEINPROC@ +MKDIR_P = @MKDIR_P@ +MSGFMT = @MSGFMT@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +TOPSUBDIRS = @TOPSUBDIRS@ +VERSION = @VERSION@ +XGETTEXT = @XGETTEXT@ +XMLLINT = @XMLLINT@ +X_RPATH = @X_RPATH@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +am__leading_dot = @am__leading_dot@ +am__tar = @am__tar@ +am__untar = @am__untar@ +#>- bindir = @bindir@ +#>+ 2 +DEPDIR = .deps +bindir = @bindir@ +build_alias = @build_alias@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host_alias = @host_alias@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +kde_appsdir = @kde_appsdir@ +kde_bindir = @kde_bindir@ +kde_confdir = @kde_confdir@ +kde_datadir = @kde_datadir@ +kde_htmldir = @kde_htmldir@ +kde_icondir = @kde_icondir@ +kde_kcfgdir = @kde_kcfgdir@ +kde_libs_htmldir = @kde_libs_htmldir@ +kde_libs_prefix = @kde_libs_prefix@ +kde_locale = @kde_locale@ +kde_mimedir = @kde_mimedir@ +kde_moduledir = @kde_moduledir@ +kde_servicesdir = @kde_servicesdir@ +kde_servicetypesdir = @kde_servicetypesdir@ +kde_sounddir = @kde_sounddir@ +kde_styledir = @kde_styledir@ +kde_templatesdir = @kde_templatesdir@ +kde_wallpaperdir = @kde_wallpaperdir@ +kde_widgetdir = @kde_widgetdir@ +tdeinitdir = @tdeinitdir@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +xdg_appsdir = @xdg_appsdir@ +xdg_directorydir = @xdg_directorydir@ +xdg_menudir = @xdg_menudir@ +KDE_LANG = ru +#>- SUBDIRS = $(AUTODIRS) +#>+ 1 +SUBDIRS =. +KDE_DOCS = konq-plugins/webarchiver +KDE_MANS = AUTO +#>- all: all-recursive +#>+ 1 +all: docs-am all-recursive + +.SUFFIXES: +$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) +#>- @for dep in $?; do \ +#>- case '$(am__configure_deps)' in \ +#>- *$$dep*) \ +#>- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ +#>- && exit 0; \ +#>- exit 1;; \ +#>- esac; \ +#>- done; \ +#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/tdeaddons/konq-plugins/webarchiver/Makefile'; \ +#>- cd $(top_srcdir) && \ +#>- $(AUTOMAKE) --gnu docs/tdeaddons/konq-plugins/webarchiver/Makefile +#>+ 12 + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/tdeaddons/konq-plugins/webarchiver/Makefile'; \ + cd $(top_srcdir) && \ + $(AUTOMAKE) --gnu docs/tdeaddons/konq-plugins/webarchiver/Makefile + cd $(top_srcdir) && perl ../scripts/admin/am_edit -p../scripts/admin docs/tdeaddons/konq-plugins/webarchiver/Makefile.in +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +# This directory's subdirectories are mostly independent; you can cd +# into them and run `make' without going through this Makefile. +# To change the values of `make' variables: instead of editing Makefiles, +# (1) if the variable is set in `config.status', edit `config.status' +# (which will cause the Makefiles to be regenerated when you run `make'); +# (2) otherwise, pass the desired values on the `make' command line. +$(RECURSIVE_TARGETS): + @failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ + *=* | --[!k]*);; \ + *k*) failcom='fail=yes';; \ + esac; \ + done; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + dot_seen=yes; \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +$(RECURSIVE_CLEAN_TARGETS): + @failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ + *=* | --[!k]*);; \ + *k*) failcom='fail=yes';; \ + esac; \ + done; \ + dot_seen=no; \ + case "$@" in \ + distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ + *) list='$(SUBDIRS)' ;; \ + esac; \ + rev=''; for subdir in $$list; do \ + if test "$$subdir" = "."; then :; else \ + rev="$$subdir $$rev"; \ + fi; \ + done; \ + rev="$$rev ."; \ + target=`echo $@ | sed s/-recursive//`; \ + for subdir in $$rev; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done && test -z "$$fail" +tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + done +ctags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + done + +ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + mkid -fID $$unique +tags: TAGS + +TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ + if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ + empty_fix=.; \ + else \ + include_option=--include; \ + empty_fix=; \ + fi; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test ! -f $$subdir/TAGS || \ + tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$tags $$unique; \ + fi +ctags: CTAGS +CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + test -z "$(CTAGS_ARGS)$$tags$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$tags $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && cd $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) $$here + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + +#>- distdir: $(DISTFILES) +#>+ 1 +distdir: distdir-nls $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ + cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ + || cp -p $$d/$$file $(distdir)/$$file \ + || exit 1; \ + fi; \ + done + list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -d "$(distdir)/$$subdir" \ + || $(MKDIR_P) "$(distdir)/$$subdir" \ + || exit 1; \ + distdir=`$(am__cd) $(distdir) && pwd`; \ + top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ + (cd $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$$top_distdir" \ + distdir="$$distdir/$$subdir" \ + am__remove_distdir=: \ + am__skip_length_check=: \ + distdir) \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-recursive +all-am: Makefile +installdirs: installdirs-recursive +installdirs-am: +install: install-recursive +install-exec: install-exec-recursive +install-data: install-data-recursive +#>- uninstall: uninstall-recursive +#>+ 1 +uninstall: uninstall-docs uninstall-nls uninstall-recursive + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-recursive +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +#>- clean: clean-recursive +#>+ 1 +clean: kde-rpo-clean clean-recursive + +#>- clean-am: clean-generic mostlyclean-am +#>+ 1 +clean-am: clean-docs clean-bcheck clean-generic mostlyclean-am + +distclean: distclean-recursive + -rm -f Makefile +distclean-am: clean-am distclean-generic distclean-tags + +dvi: dvi-recursive + +dvi-am: + +html: html-recursive + +info: info-recursive + +info-am: + +#>- install-data-am: +#>+ 1 +install-data-am: install-docs install-nls + +install-dvi: install-dvi-recursive + +install-exec-am: + +install-html: install-html-recursive + +install-info: install-info-recursive + +install-man: + +install-pdf: install-pdf-recursive + +install-ps: install-ps-recursive + +installcheck-am: + +maintainer-clean: maintainer-clean-recursive + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-recursive + +mostlyclean-am: mostlyclean-generic + +pdf: pdf-recursive + +pdf-am: + +ps: ps-recursive + +ps-am: + +uninstall-am: + +.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ + install-strip + +.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ + all all-am check check-am clean clean-generic ctags \ + ctags-recursive distclean distclean-generic distclean-tags \ + distdir dvi dvi-am html html-am info info-am install \ + install-am install-data install-data-am install-dvi \ + install-dvi-am install-exec install-exec-am install-html \ + install-html-am install-info install-info-am install-man \ + install-pdf install-pdf-am install-ps install-ps-am \ + install-strip installcheck installcheck-am installdirs \ + installdirs-am maintainer-clean maintainer-clean-generic \ + mostlyclean mostlyclean-generic pdf pdf-am ps ps-am tags \ + tags-recursive uninstall uninstall-am + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: + +#>+ 2 +KDE_DIST=Makefile.in index.docbook Makefile.am index.cache.bz2 + +#>+ 24 +index.cache.bz2: $(srcdir)/index.docbook $(KDE_XSL_STYLESHEET) index.docbook + @if test -n "$(MEINPROC)"; then echo $(MEINPROC) --check --cache index.cache.bz2 $(srcdir)/index.docbook; $(MEINPROC) --check --cache index.cache.bz2 $(srcdir)/index.docbook; fi + +docs-am: index.cache.bz2 + +install-docs: docs-am install-nls + $(mkinstalldirs) $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/konq-plugins/webarchiver + @if test -f index.cache.bz2; then \ + echo $(INSTALL_DATA) index.cache.bz2 $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/konq-plugins/webarchiver/; \ + $(INSTALL_DATA) index.cache.bz2 $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/konq-plugins/webarchiver/; \ + elif test -f $(srcdir)/index.cache.bz2; then \ + echo $(INSTALL_DATA) $(srcdir)/index.cache.bz2 $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/konq-plugins/webarchiver/; \ + $(INSTALL_DATA) $(srcdir)/index.cache.bz2 $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/konq-plugins/webarchiver/; \ + fi + -rm -f $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/konq-plugins/webarchiver/common + $(LN_S) $(kde_libs_htmldir)/$(KDE_LANG)/common $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/konq-plugins/webarchiver/common + +uninstall-docs: + -rm -rf $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/konq-plugins/webarchiver + +clean-docs: + -rm -f index.cache.bz2 + + +#>+ 13 +install-nls: + $(mkinstalldirs) $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/konq-plugins/webarchiver + @for base in index.docbook ; do \ + echo $(INSTALL_DATA) $$base $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/konq-plugins/webarchiver/$$base ;\ + $(INSTALL_DATA) $(srcdir)/$$base $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/konq-plugins/webarchiver/$$base ;\ + done + +uninstall-nls: + for base in index.docbook ; do \ + rm -f $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/konq-plugins/webarchiver/$$base ;\ + done + + +#>+ 5 +distdir-nls: + for file in index.docbook ; do \ + cp $(srcdir)/$$file $(distdir); \ + done + +#>+ 15 +force-reedit: + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/tdeaddons/konq-plugins/webarchiver/Makefile'; \ + cd $(top_srcdir) && \ + $(AUTOMAKE) --gnu docs/tdeaddons/konq-plugins/webarchiver/Makefile + cd $(top_srcdir) && perl ../scripts/admin/am_edit -p../scripts/admin docs/tdeaddons/konq-plugins/webarchiver/Makefile.in + + +#>+ 21 +clean-bcheck: + rm -f *.bchecktest.cc *.bchecktest.cc.class a.out + +bcheck: bcheck-recursive + +bcheck-am: + @for i in ; do \ + if test $(srcdir)/$$i -nt $$i.bchecktest.cc; then \ + echo "int main() {return 0;}" > $$i.bchecktest.cc ; \ + echo "#include \"$$i\"" >> $$i.bchecktest.cc ; \ + echo "$$i"; \ + if ! $(CXX) $(DEFS) -I. -I$(srcdir) -I$(top_builddir) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(CXXFLAGS) $(KDE_CXXFLAGS) --dump-class-hierarchy -c $$i.bchecktest.cc; then \ + rm -f $$i.bchecktest.cc; exit 1; \ + fi ; \ + echo "" >> $$i.bchecktest.cc.class; \ + perl $(top_srcdir)/admin/bcheck.pl $$i.bchecktest.cc.class || { rm -f $$i.bchecktest.cc; exit 1; }; \ + rm -f a.out; \ + fi ; \ + done + + +#>+ 3 +final: + $(MAKE) all-am + +#>+ 3 +final-install: + $(MAKE) install-am + +#>+ 3 +no-final: + $(MAKE) all-am + +#>+ 3 +no-final-install: + $(MAKE) install-am + +#>+ 3 +kde-rpo-clean: + -rm -f *.rpo + +#>+ 3 +nmcheck: +nmcheck-am: nmcheck diff --git a/tde-i18n-ru/docs/tdeaddons/konq-plugins/webarchiver/index.cache.bz2 b/tde-i18n-ru/docs/tdeaddons/konq-plugins/webarchiver/index.cache.bz2 Binary files differnew file mode 100644 index 00000000000..6f2fa60dae6 --- /dev/null +++ b/tde-i18n-ru/docs/tdeaddons/konq-plugins/webarchiver/index.cache.bz2 diff --git a/tde-i18n-ru/docs/tdeaddons/konq-plugins/webarchiver/index.docbook b/tde-i18n-ru/docs/tdeaddons/konq-plugins/webarchiver/index.docbook new file mode 100644 index 00000000000..bc8d34437c5 --- /dev/null +++ b/tde-i18n-ru/docs/tdeaddons/konq-plugins/webarchiver/index.docbook @@ -0,0 +1,103 @@ +<?xml version="1.0" ?> +<!DOCTYPE article PUBLIC "-//KDE//DTD DocBook XML V4.2-Based Variant V1.1//EN" +"dtd/kdex.dtd" [ +<!ENTITY % addindex "IGNORE"> +<!ENTITY % Russian "INCLUDE" +> <!-- change language only here --> +]> + +<article lang="&language;"> + +<sect1 id="webarchiver"> +<sect1info> + +<authorgroup> +<author +><firstname +>Gardner</firstname +> <surname +>Bell</surname +> <affiliation +><address +><email +>gbell72@rogers.com</email +></address +></affiliation> +</author> + +<othercredit role="translator" +><firstname +>Дмитрий</firstname +><surname +>Рязанцев</surname +><affiliation +><address +><email +>DJm00n@rambler.ru</email +></address +></affiliation +><contrib +>Перевод на русский</contrib +></othercredit +> +</authorgroup> +<date +>2004-07-14</date +> <releaseinfo +>3.10.00</releaseinfo +> <abstract +> <para +>Модуль веб архивации для &konqueror; позволяет архивирование веб страниц, документов и изображений в <literal role="extension" +>.war</literal +> формат.</para> +</abstract> + +<keywordset> +<keyword +>KDE</keyword> +<keyword +>tdeaddons</keyword> +<keyword +>konqueror</keyword> +<keyword +>модули</keyword> +<keyword +>webarchiver</keyword> +</keywordset> + +</sect1info> + +<title +>Веб архиватор</title> + +<sect2> +<title +>Использование Веб архиватора</title> + +<para +>Для доступа к веб архиватору выберите в меню <menuchoice +><guimenu +>Сервис</guimenu +><guimenuitem +>Архивировать веб страницу...</guimenuitem +></menuchoice +>. Появиться диалог, в котором можно сохранить просматриваемый веб сайт.</para> + +</sect2> + +<sect2> +<title +>Авторы</title> + +<para +>Модуль веб архивации Copyright © 2001-2003 Andreas Schlapbach, Antonio Larossa и Malte Starostik <email +>schlpbch@iam.unibe.ch</email +> <email +>larossa@kde.org</email +> <email +>malte@kde.org</email +></para> +</sect2> + +</sect1> +</article> |